DSCResources/MSFT_xExchSendConnector/MSFT_xExchSendConnector.psm1
|
<#
.SYNOPSIS Gets the resource state. .PARAMETER Name Specifies a descriptive name for the connector. .PARAMETER Credential Credentials used to establish a remote PowerShell session to Exchange. .PARAMETER AddressSpaces Specifies the domain names to which the Send connector routes mail. #> function Get-TargetResource { [Diagnostics.CodeAnalysis.SuppressMessageAttribute("PSDSCUseVerboseMessageInDSCResource", "")] [CmdletBinding()] [OutputType([System.Collections.Hashtable])] param ( [Parameter(Mandatory = $true)] [System.String] $Name, [Parameter(Mandatory = $true)] [System.Management.Automation.PSCredential] [System.Management.Automation.Credential()] $Credential, [Parameter(Mandatory = $true)] [System.String[]] $AddressSpaces ) Write-FunctionEntry -Parameters @{ 'Identity' = $Name } -Verbose:$VerbosePreference # Establish remote PowerShell session Get-RemoteExchangeSession -Credential $Credential -CommandsToLoad 'Get-SendConnector', 'Get-ADPermission' -Verbose:$VerbosePreference $connector = Get-SendConnector -ErrorAction SilentlyContinue | Where-Object -Property 'Identity' -eq $Name if ($null -ne $connector) { $adPermissions = Get-ADExtendedPermissions -Identity $Name $returnValue = @{ Name = [System.String] $connector.Name AddressSpaces = [System.String[]] $connector.AddressSpaces Comment = [System.String] $connector.Comment ConnectionInactivityTimeout = [System.String] $connector.ConnectionInactivityTimeout ConnectorType = [System.String] $connector.ConnectorType DNSRoutingEnabled = [System.Boolean] $connector.DNSRoutingEnabled DomainSecureEnabled = [System.Boolean] $connector.DomainSecureEnabled Enabled = [System.Boolean] $connector.Enabled ErrorPolicies = [System.String] $connector.ErrorPolicies ExtendedProtectionPolicy = [System.String] $connector.ExtendedProtectionPolicy ExtendedRightAllowEntries = [Microsoft.Management.Infrastructure.CimInstance[]] $adPermissions['ExtendedRightAllowEntries'] ExtendedRightDenyEntries = [Microsoft.Management.Infrastructure.CimInstance[]] $adPermissions['ExtendedRightDenyEntries'] ForceHELO = [System.Boolean] $connector.ForceHELO FrontendProxyEnabled = [System.Boolean] $connector.FrontendProxyEnabled Fqdn = [System.String] $connector.Fqdn IgnoreSTARTTLS = [System.Boolean] $connector.IgnoreSTARTTLS IsCoexistenceConnector = [System.Boolean] $connector.IsCoexistenceConnector IsScopedConnector = [System.Boolean] $connector.IsScopedConnector LinkedReceiveConnector = [System.String] $connector.LinkedReceiveConnector MaxMessageSize = [System.String] $connector.MaxMessageSize Port = [System.Int32] $connector.Port ProtocolLoggingLevel = [System.String] $connector.ProtocolLoggingLevel RequireTLS = [System.Boolean] $connector.RequireTLS SmartHostAuthMechanism = [System.String] $connector.SmartHostAuthMechanism SmartHosts = [System.String[]] $connector.SmartHosts SmtpMaxMessagesPerConnection = [System.Int32] $connector.SmtpMaxMessagesPerConnection SourceIPAddress = [System.String] $connector.SourceIPAddress SourceTransportServers = [System.String[]] $connector.SourceTransportServers TlsDomain = [System.String] $connector.TlsDomain TlsAuthLevel = [System.String] $connector.TlsAuthLevel UseExternalDNSServersEnabled = [System.Boolean] $connector.UseExternalDNSServersEnabled TlsCertificateName = [System.String] $connector.TlsCertificateName Ensure = 'Present' } } else { $returnValue = @{ Ensure = 'Absent' } } $returnValue } <# .SYNOPSIS Sets the resource state. .PARAMETER Name Specifies a descriptive name for the connector. .PARAMETER Credential Credentials used to establish a remote PowerShell session to Exchange. .PARAMETER Ensure Whether the connector should be present or not. .PARAMETER AddressSpaces Specifies the domain names to which the Send connector routes mail. .PARAMETER AuthenticationCredential Specifies the username and password that's required to use the connector. .PARAMETER Comment Specifies an optional comment. .PARAMETER ConnectionInactivityTimeout Specifies the maximum time an idle connection can remain open. .PARAMETER ConnectorType Specifies whether the connector is used in hybrid deployments to send messages to Office 365. .PARAMETER DNSRoutingEnabled Specifies whether the Send connector uses Domain Name System .PARAMETER DomainController Specifies the domain controller that's used by this cmdlet to read data from or write data to Active Directory. .PARAMETER DomainSecureEnabled Enables mutual Transport Layer Security .PARAMETER Enabled Specifies whether to enable the Send connector to process email messages. .PARAMETER ErrorPolicies Specifies how communication errors are treated. .PARAMETER ExtendedRightAllowEntries Additional allow permissions. .PARAMETER ExtendedRightDenyEntries Additional deny permissions. .PARAMETER ForceHELO Specifies whether HELO is sent instead of the default EHLO. .PARAMETER FrontendProxyEnabled Routes outbound messages through the CAS server .PARAMETER Fqdn Specifies the FQDN used as the source server. .PARAMETER IgnoreSTARTTLS Specifies whether to ignore the StartTLS option offered by a remote sending server. .PARAMETER IsCoexistenceConnector Specifies whether this Send connector is used for secure mail flow between your on .PARAMETER IsScopedConnector Specifies the availability of the connector to other Mailbox servers with the Transport service. .PARAMETER LinkedReceiveConnector Specifies whether to force all messages received by the specified Receive connector out through this Send connector. .PARAMETER MaxMessageSize Specifies the maximum size of a message that can pass through a connector. .PARAMETER Port Specifies the port number for smart host forwarding. .PARAMETER ProtocolLoggingLevel Specifies whether to enable protocol logging. .PARAMETER RequireTLS Specifies whether all messages sent through this connector must be transmitted using TLS. .PARAMETER SmartHostAuthMechanism Specifies the smart host authentication mechanism to use for authentication. .PARAMETER SmartHosts Specifies the smart hosts the Send connector uses to route mail. .PARAMETER SmtpMaxMessagesPerConnection Specifies the maximum number of messages the server can send per connection. .PARAMETER SourceIPAddress Specifies the local IP address to use as the endpoint for an SMTP connection. .PARAMETER SourceTransportServers Specifies the names of the Mailbox servers that can use this Send connector. .PARAMETER TlsAuthLevel Specifies the TLS authentication level that is used for outbound TLS connections. .PARAMETER TlsDomain Specifies the domain name that the Send connector uses to verify the FQDN of the target certificate. .PARAMETER UseExternalDNSServersEnabled Specifies whether the connector uses the external DNS list specified by the ExternalDNSServers parameter of the Set .PARAMETER TlsCertificateName Specifies the X.509 certificate to use for TLS encryption. .PARAMETER Usage Specifies the default permissions and authentication methods assigned to the Send connector. #> function Set-TargetResource { [Diagnostics.CodeAnalysis.SuppressMessageAttribute("PSDSCUseVerboseMessageInDSCResource", "")] [CmdletBinding()] param ( [Parameter(Mandatory = $true)] [System.String] $Name, [Parameter(Mandatory = $true)] [System.Management.Automation.PSCredential] [System.Management.Automation.Credential()] $Credential, [Parameter()] [ValidateSet('Present', 'Absent')] [System.String] $Ensure = 'Present', [Parameter()] [System.Management.Automation.PSCredential] [System.Management.Automation.Credential()] $AuthenticationCredential, [Parameter()] [Microsoft.Management.Infrastructure.CimInstance[]] $ExtendedRightAllowEntries = @(), [Parameter()] [Microsoft.Management.Infrastructure.CimInstance[]] $ExtendedRightDenyEntries = @(), [Parameter(Mandatory = $true)] [System.String[]] $AddressSpaces, [Parameter()] [System.String] $Comment, [Parameter()] [System.String] $ConnectionInactivityTimeout, [Parameter()] [ValidateSet('Default', 'XPremises')] [System.String] $ConnectorType, [Parameter()] [System.Boolean] $DNSRoutingEnabled, [Parameter()] [System.String] $DomainController, [Parameter()] [System.Boolean] $DomainSecureEnabled, [Parameter()] [System.Boolean] $Enabled, [Parameter()] [ValidateSet('Default', 'DowngradeAuthFailures', 'DowngradeDNSFailures')] [System.String] $ErrorPolicies, [Parameter()] [System.Boolean] $ForceHELO, [Parameter()] [System.Boolean] $FrontendProxyEnabled, [Parameter()] [System.String] $Fqdn, [Parameter()] [System.Boolean] $IgnoreSTARTTLS, [Parameter()] [System.Boolean] $IsCoexistenceConnector, [Parameter()] [System.Boolean] $IsScopedConnector, [Parameter()] [System.String] $LinkedReceiveConnector, [Parameter()] [System.String] $MaxMessageSize, [Parameter()] [System.Int32] $Port, [Parameter()] [ValidateSet('None', 'Verbose')] [System.String] $ProtocolLoggingLevel, [Parameter()] [System.Boolean] $RequireTLS, [Parameter()] [ValidateSet('None', 'BasicAuth', 'BasicAuthRequireTLS', 'ExchangeServer', 'ExternalAuthoritative')] [System.String] $SmartHostAuthMechanism, [Parameter()] [System.String[]] $SmartHosts, [Parameter()] [System.Int32] $SmtpMaxMessagesPerConnection, [Parameter()] [System.String] $SourceIPAddress, [Parameter()] [System.String[]] $SourceTransportServers, [Parameter()] [ValidateSet('EncryptionOnly', 'CertificateValidation', 'DomainValidation')] [System.String] $TlsAuthLevel, [Parameter()] [System.String] $TlsDomain, [Parameter()] [System.Boolean] $UseExternalDNSServersEnabled, [Parameter()] [System.String] $TlsCertificateName, [Parameter()] [ValidateSet('Internal', 'Internet', 'Partner', 'Custom')] [System.String] $Usage ) Write-FunctionEntry -Parameters @{ 'Identity' = $Name } -Verbose:$VerbosePreference $connector = Get-TargetResource -Name $Name -Credential $Credential -AddressSpaces $AddressSpaces # Establish remote PowerShell session Get-RemoteExchangeSession -Credential $Credential -CommandsToLoad '*SendConnector', '*ADPermission' -Verbose:$VerbosePreference if ($Ensure -eq 'Absent') { Write-Verbose -Message "Removing send connector $Name." Remove-SendConnector -Identity $Name -DomainController $PSBoundParameters['DomainController'] -Confirm:$false } else { # Remove Credential and Ensure so we don't pass it into the next command Remove-FromPSBoundParametersUsingHashtable -PSBoundParametersIn $PSBoundParameters -ParamsToRemove 'Credential', 'Ensure', 'ExtendedRightAllowEntries', 'ExtendedRightDenyEntries' Set-EmptyStringParamsToNull -PSBoundParametersIn $PSBoundParameters # We need to create the new connector if ($connector['Ensure'] -eq 'Absent') { # Create the connector Write-Verbose -Message "Creating send connector $Name." New-SendConnector @PSBoundParameters if (($ExtendedRightAllowEntries -or $ExtendedRightDenyEntries) -and $null -eq $PSBoundParameters['DomainController']) { $sendConnectorFound = Get-ADPermission -Identity $Name -ErrorAction SilentlyContinue $itt = 0 while ($null -eq $sendConnectorFound -and $itt -le 3) { Write-Verbose -Message 'Extended AD permissions were specified and the new connector is still not found in AD. Sleeping for 30 seconds.' Start-Sleep -Seconds 30 $itt++ $sendConnectorFound = Get-ADPermission -Identity $Name -ErrorAction SilentlyContinue } if ($null -eq $sendConnectorFound) { throw 'The new send connector was not found after 2 minutes of wait time. Please check AD replication!' } } if ($null -ne $PSBoundParameters['DomainController']) { Write-Verbose -Message 'Setting domain controller as default parameter.' $PSDefaultParameterValues = @{ 'Add-ADPermission:DomainController' = $DomainController } } if ($ExtendedRightAllowEntries) { Write-Verbose -Message "Setting ExtendedRightAllowEntries for send connector: $Name." foreach ($ExtendedRightAllowEntry in $ExtendedRightAllowEntries) { foreach ($Value in $($ExtendedRightAllowEntry.Value.Split(','))) { Add-ADPermission -Identity $Name -User $ExtendedRightAllowEntry.Key -ExtendedRights $Value } } } if ($ExtendedRightDenyEntries) { Write-Verbose -Message "Setting ExtendedRightDenyEntries for send connector: $Name." foreach ($ExtendedRightDenyEntry in $ExtendedRightDenyEntries) { foreach ($Value in $($ExtendedRightDenyEntry.Value.Split(','))) { Add-ADPermission -Identity $Name -User $ExtendedRightDenyEntry.Key -ExtendedRights $Value -Deny -Confirm:$false } } } } else { Write-Verbose -Message "Send connector $Name not compliant. Setting the properties." # Usage is not a valid command for Set-SendConnector Remove-FromPSBoundParametersUsingHashtable -PSBoundParametersIn $PSBoundParameters -ParamsToRemove 'Ensure', 'ExtendedRightAllowEntries', 'ExtendedRightDenyEntries' , 'Name', 'Usage' $PSBoundParameters['Identity'] = $Name Set-SendConnector @PSBoundParameters if ($null -ne $PSBoundParameters['DomainController']) { $PSDefaultParameterValues = @{ 'Add-ADPermission:DomainController' = $DomainController } } # Set AD permissions if ($ExtendedRightAllowEntries) { foreach ($ExtendedRightAllowEntry in $ExtendedRightAllowEntries) { foreach ($Value in $($ExtendedRightAllowEntry.Value.Split(','))) { Add-ADPermission -Identity $Name -User $ExtendedRightAllowEntry.Key -ExtendedRights $Value } } } if ($ExtendedRightDenyEntries) { foreach ($ExtendedRightDenyEntry in $ExtendedRightDenyEntries) { foreach ($Value in $($ExtendedRightDenyEntry.Value.Split(','))) { Add-ADPermission -Identity $Name -User $ExtendedRightDenyEntry.Key -ExtendedRights $Value -Deny -Confirm:$false } } } } } } <# .SYNOPSIS Tets the resource state. .PARAMETER Name Specifies a descriptive name for the connector. .PARAMETER Credential Credentials used to establish a remote PowerShell session to Exchange. .PARAMETER Ensure Whether the connector should be present or not. .PARAMETER AddressSpaces Specifies the domain names to which the Send connector routes mail. .PARAMETER AuthenticationCredential Specifies the username and password that's required to use the connector. .PARAMETER Comment Specifies an optional comment. .PARAMETER ConnectionInactivityTimeout Specifies the maximum time an idle connection can remain open. .PARAMETER ConnectorType Specifies whether the connector is used in hybrid deployments to send messages to Office 365. .PARAMETER DNSRoutingEnabled Specifies whether the Send connector uses Domain Name System .PARAMETER DomainController Specifies the domain controller that's used by this cmdlet to read data from or write data to Active Directory. .PARAMETER DomainSecureEnabled Enables mutual Transport Layer Security .PARAMETER Enabled Specifies whether to enable the Send connector to process email messages. .PARAMETER ErrorPolicies Specifies how communication errors are treated. .PARAMETER ExtendedRightAllowEntries Additional allow permissions. .PARAMETER ExtendedRightDenyEntries Additional deny permissions. .PARAMETER ForceHELO Specifies whether HELO is sent instead of the default EHLO. .PARAMETER FrontendProxyEnabled Routes outbound messages through the CAS server .PARAMETER Fqdn Specifies the FQDN used as the source server. .PARAMETER IgnoreSTARTTLS Specifies whether to ignore the StartTLS option offered by a remote sending server. .PARAMETER IsCoexistenceConnector Specifies whether this Send connector is used for secure mail flow between your on .PARAMETER IsScopedConnector Specifies the availability of the connector to other Mailbox servers with the Transport service. .PARAMETER LinkedReceiveConnector Specifies whether to force all messages received by the specified Receive connector out through this Send connector. .PARAMETER MaxMessageSize Specifies the maximum size of a message that can pass through a connector. .PARAMETER Port Specifies the port number for smart host forwarding. .PARAMETER ProtocolLoggingLevel Specifies whether to enable protocol logging. .PARAMETER RequireTLS Specifies whether all messages sent through this connector must be transmitted using TLS. .PARAMETER SmartHostAuthMechanism Specifies the smart host authentication mechanism to use for authentication. .PARAMETER SmartHosts Specifies the smart hosts the Send connector uses to route mail. .PARAMETER SmtpMaxMessagesPerConnection Specifies the maximum number of messages the server can send per connection. .PARAMETER SourceIPAddress Specifies the local IP address to use as the endpoint for an SMTP connection. .PARAMETER SourceTransportServers Specifies the names of the Mailbox servers that can use this Send connector. .PARAMETER TlsAuthLevel Specifies the TLS authentication level that is used for outbound TLS connections. .PARAMETER TlsDomain Specifies the domain name that the Send connector uses to verify the FQDN of the target certificate. .PARAMETER UseExternalDNSServersEnabled Specifies whether the connector uses the external DNS list specified by the ExternalDNSServers parameter of the Set .PARAMETER TlsCertificateName Specifies the X.509 certificate to use for TLS encryption. .PARAMETER Usage Specifies the default permissions and authentication methods assigned to the Send connector. #> function Test-TargetResource { [Diagnostics.CodeAnalysis.SuppressMessageAttribute("PSDSCUseVerboseMessageInDSCResource", "")] [CmdletBinding()] [OutputType([System.Boolean])] param ( [Parameter(Mandatory = $true)] [System.String] $Name, [Parameter(Mandatory = $true)] [System.Management.Automation.PSCredential] [System.Management.Automation.Credential()] $Credential, [Parameter()] [ValidateSet('Present', 'Absent')] [System.String] $Ensure, [Parameter()] [System.Management.Automation.PSCredential] [System.Management.Automation.Credential()] $AuthenticationCredential, [Parameter()] [Microsoft.Management.Infrastructure.CimInstance[]] $ExtendedRightAllowEntries = @(), [Parameter()] [Microsoft.Management.Infrastructure.CimInstance[]] $ExtendedRightDenyEntries = @(), [Parameter(Mandatory = $true)] [System.String[]] $AddressSpaces, [Parameter()] [System.String] $Comment, [Parameter()] [System.String] $ConnectionInactivityTimeout, [Parameter()] [ValidateSet('Default', 'XPremises')] [System.String] $ConnectorType, [Parameter()] [System.Boolean] $DNSRoutingEnabled, [Parameter()] [System.String] $DomainController, [Parameter()] [System.Boolean] $DomainSecureEnabled, [Parameter()] [System.Boolean] $Enabled, [Parameter()] [ValidateSet('Default', 'DowngradeAuthFailures', 'DowngradeDNSFailures')] [System.String] $ErrorPolicies, [Parameter()] [System.Boolean] $ForceHELO, [Parameter()] [System.Boolean] $FrontendProxyEnabled, [Parameter()] [System.String] $Fqdn, [Parameter()] [System.Boolean] $IgnoreSTARTTLS, [Parameter()] [System.Boolean] $IsCoexistenceConnector, [Parameter()] [System.Boolean] $IsScopedConnector, [Parameter()] [System.String] $LinkedReceiveConnector, [Parameter()] [System.String] $MaxMessageSize, [Parameter()] [System.Int32] $Port, [Parameter()] [ValidateSet('None', 'Verbose')] [System.String] $ProtocolLoggingLevel, [Parameter()] [System.Boolean] $RequireTLS, [Parameter()] [ValidateSet('None', 'BasicAuth', 'BasicAuthRequireTLS', 'ExchangeServer', 'ExternalAuthoritative')] [System.String] $SmartHostAuthMechanism, [Parameter()] [System.String[]] $SmartHosts, [Parameter()] [System.Int32] $SmtpMaxMessagesPerConnection, [Parameter()] [System.String] $SourceIPAddress, [Parameter()] [System.String[]] $SourceTransportServers, [Parameter()] [ValidateSet('EncryptionOnly', 'CertificateValidation', 'DomainValidation')] [System.String] $TlsAuthLevel, [Parameter()] [System.String] $TlsDomain, [Parameter()] [System.Boolean] $UseExternalDNSServersEnabled, [Parameter()] [System.String] $TlsCertificateName, [Parameter()] [ValidateSet('Internal', 'Internet', 'Partner', 'Custom')] [System.String] $Usage ) Write-FunctionEntry -Parameters @{ 'Identity' = $Name } -Verbose:$VerbosePreference $connector = Get-TargetResource -Name $Name -Credential $Credential -AddressSpaces $AddressSpaces # Establish remote PowerShell session Get-RemoteExchangeSession -Credential $Credential -CommandsToLoad 'Get-SendConnector', 'Get-ADPermission' -Verbose:$VerbosePreference $testResults = $true if ($connector['Ensure'] -eq 'Absent') { if ($Ensure -eq 'Present') { Write-Verbose -Message 'Send Connector should exist, but does not.' $testResults = $false } } else { if ($Ensure -eq 'Absent') { Write-Verbose -Message 'Send Connector should not exist, but does.' $testResults = $false } else { # Get AD permissions if necessary if (($ExtendedRightAllowEntries) -or ($ExtendedRightDenyEntries)) { if ($PSBoundParameters.ContainsKey('DomainController')) { $adPermissions = Get-ADPermission -Identity $Name -DomainController $DomainController | Where-Object { $_.IsInherited -eq $false } } else { $adPermissions = Get-ADPermission -Identity $Name | Where-Object { $_.IsInherited -eq $false } } $splat = @{ ExtendedRightAllowEntries = $ExtendedRightAllowEntries ExtendedRightDenyEntries = $ExtendedRightDenyEntries ADPermissions = $adPermissions } $testResults = Test-ExtendedRights @splat } if (!(Test-ExchangeSetting -Name 'AddressSpaces' -Type 'Array' -ExpectedValue $AddressSpaces -ActualValue $connector.AddressSpaces -PSBoundParametersIn $PSBoundParameters -Verbose:$VerbosePreference)) { $testResults = $false } if (!(Test-ExchangeSetting -Name 'Comment' -Type 'String' -ExpectedValue $Comment -ActualValue $connector.Comment -PSBoundParametersIn $PSBoundParameters -Verbose:$VerbosePreference)) { $testResults = $false } if (!(Test-ExchangeSetting -Name 'ConnectorType' -Type 'String' -ExpectedValue $ConnectorType -ActualValue $connector.ConnectorType -PSBoundParametersIn $PSBoundParameters -Verbose:$VerbosePreference)) { $testResults = $false } if (!(Test-ExchangeSetting -Name 'DNSRoutingEnabled' -Type 'Boolean' -ExpectedValue $DNSRoutingEnabled -ActualValue $connector.DNSRoutingEnabled -PSBoundParametersIn $PSBoundParameters -Verbose:$VerbosePreference)) { $testResults = $false } if (!(Test-ExchangeSetting -Name 'DomainSecureEnabled' -Type 'Boolean' -ExpectedValue $DomainSecureEnabled -ActualValue $connector.DomainSecureEnabled -PSBoundParametersIn $PSBoundParameters -Verbose:$VerbosePreference)) { $testResults = $false } if (!(Test-ExchangeSetting -Name 'ConnectionInactivityTimeout' -Type 'Timespan' -ExpectedValue $ConnectionInactivityTimeout -ActualValue $connector.ConnectionInactivityTimeout -PSBoundParametersIn $PSBoundParameters -Verbose:$VerbosePreference)) { $testResults = $false } if (!(Test-ExchangeSetting -Name 'DeliveryStatusNotificationEnabled' -Type 'Boolean' -ExpectedValue $DeliveryStatusNotificationEnabled -ActualValue $connector.DeliveryStatusNotificationEnabled -PSBoundParametersIn $PSBoundParameters -Verbose:$VerbosePreference)) { $testResults = $false } if (!(Test-ExchangeSetting -Name 'DomainSecureEnabled' -Type 'Boolean' -ExpectedValue $DomainSecureEnabled -ActualValue $connector.DomainSecureEnabled -PSBoundParametersIn $PSBoundParameters -Verbose:$VerbosePreference)) { $testResults = $false } if (!(Test-ExchangeSetting -Name 'Enabled' -Type 'Boolean' -ExpectedValue $Enabled -ActualValue $connector.Enabled -PSBoundParametersIn $PSBoundParameters -Verbose:$VerbosePreference)) { $testResults = $false } if (!(Test-ExchangeSetting -Name 'ErrorPolicies' -Type 'String' -ExpectedValue $ErrorPolicies -ActualValue $connector.ErrorPolicies -PSBoundParametersIn $PSBoundParameters -Verbose:$VerbosePreference)) { $testResults = $false } if (!(Test-ExchangeSetting -Name 'ForceHELO' -Type 'Boolean' -ExpectedValue $ForceHELO -ActualValue $connector.ForceHELO -PSBoundParametersIn $PSBoundParameters -Verbose:$VerbosePreference)) { $testResults = $false } if (!(Test-ExchangeSetting -Name 'FrontendProxyEnabled' -Type 'Boolean' -ExpectedValue $FrontendProxyEnabled -ActualValue $connector.FrontendProxyEnabled -PSBoundParametersIn $PSBoundParameters -Verbose:$VerbosePreference)) { $testResults = $false } if (!(Test-ExchangeSetting -Name 'Fqdn' -Type 'String' -ExpectedValue $Fqdn -ActualValue $connector.Fqdn -PSBoundParametersIn $PSBoundParameters -Verbose:$VerbosePreference)) { $testResults = $false } if (!(Test-ExchangeSetting -Name 'IgnoreSTARTTLS' -Type 'Boolean' -ExpectedValue $IgnoreSTARTTLS -ActualValue $connector.IgnoreSTARTTLS -PSBoundParametersIn $PSBoundParameters -Verbose:$VerbosePreference)) { $testResults = $false } if (!(Test-ExchangeSetting -Name 'IsCoexistenceConnector' -Type 'Boolean' -ExpectedValue $IsCoexistenceConnector -ActualValue $connector.IsCoexistenceConnector -PSBoundParametersIn $PSBoundParameters -Verbose:$VerbosePreference)) { $testResults = $false } if (!(Test-ExchangeSetting -Name 'IsScopedConnector' -Type 'Boolean' -ExpectedValue $IsScopedConnector -ActualValue $connector.IsScopedConnector -PSBoundParametersIn $PSBoundParameters -Verbose:$VerbosePreference)) { $testResults = $false } if (!(Test-ExchangeSetting -Name 'LinkedReceiveConnector' -Type 'String' -ExpectedValue $LinkedReceiveConnector -ActualValue $connector.LinkedReceiveConnector -PSBoundParametersIn $PSBoundParameters -Verbose:$VerbosePreference)) { $testResults = $false } if (!(Test-ExchangeSetting -Name 'MaxMessageSize' -Type 'ByteQuantifiedSize' -ExpectedValue $MaxMessageSize -ActualValue $connector.MaxMessageSize -PSBoundParametersIn $PSBoundParameters -Verbose:$VerbosePreference)) { $testResults = $false } if (!(Test-ExchangeSetting -Name 'Port' -Type 'Int' -ExpectedValue $Port -ActualValue $connector.Port -PSBoundParametersIn $PSBoundParameters -Verbose:$VerbosePreference)) { $testResults = $false } if (!(Test-ExchangeSetting -Name 'ProtocolLoggingLevel' -Type 'String' -ExpectedValue $ProtocolLoggingLevel -ActualValue $connector.ProtocolLoggingLevel -PSBoundParametersIn $PSBoundParameters -Verbose:$VerbosePreference)) { $testResults = $false } if (!(Test-ExchangeSetting -Name 'RequireTLS' -Type 'Boolean' -ExpectedValue $RequireTLS -ActualValue $connector.RequireTLS -PSBoundParametersIn $PSBoundParameters -Verbose:$VerbosePreference)) { $testResults = $false } if (!(Test-ExchangeSetting -Name 'SmartHostAuthMechanism' -Type 'String' -ExpectedValue $SmartHostAuthMechanism -ActualValue $connector.SmartHostAuthMechanism -PSBoundParametersIn $PSBoundParameters -Verbose:$VerbosePreference)) { $testResults = $false } if (!(Test-ExchangeSetting -Name 'SmartHosts' -Type 'Array' -ExpectedValue $SmartHosts -ActualValue $connector.SmartHosts -PSBoundParametersIn $PSBoundParameters -Verbose:$VerbosePreference)) { $testResults = $false } if (!(Test-ExchangeSetting -Name 'SmtpMaxMessagesPerConnection' -Type 'Int' -ExpectedValue $SmtpMaxMessagesPerConnection -ActualValue $connector.SmtpMaxMessagesPerConnection -PSBoundParametersIn $PSBoundParameters -Verbose:$VerbosePreference)) { $testResults = $false } if (!(Test-ExchangeSetting -Name 'SourceIPAddress' -Type 'String' -ExpectedValue $SourceIPAddress -ActualValue $connector.SourceIPAddress -PSBoundParametersIn $PSBoundParameters -Verbose:$VerbosePreference)) { $testResults = $false } if (!(Test-ExchangeSetting -Name 'SourceTransportServers' -Type 'Array' -ExpectedValue $SourceTransportServers -ActualValue $connector.SourceTransportServers -PSBoundParametersIn $PSBoundParameters -Verbose:$VerbosePreference)) { $testResults = $false } if (!(Test-ExchangeSetting -Name 'TlsAuthLevel' -Type 'String' -ExpectedValue $TlsAuthLevel -ActualValue $connector.TlsAuthLevel -PSBoundParametersIn $PSBoundParameters -Verbose:$VerbosePreference)) { $testResults = $false } if (!(Test-ExchangeSetting -Name 'TlsDomain' -Type 'String' -ExpectedValue $TlsDomain -ActualValue $connector.TlsDomain -PSBoundParametersIn $PSBoundParameters -Verbose:$VerbosePreference)) { $testResults = $false } if (!(Test-ExchangeSetting -Name 'UseExternalDNSServersEnabled' -Type 'Boolean' -ExpectedValue $UseExternalDNSServersEnabled -ActualValue $connector.UseExternalDNSServersEnabled -PSBoundParametersIn $PSBoundParameters -Verbose:$VerbosePreference)) { $testResults = $false } if (!(Test-ExchangeSetting -Name 'TlsCertificateName' -Type 'String' -ExpectedValue $TlsCertificateName -ActualValue $connector.TlsCertificateName -PSBoundParametersIn $PSBoundParameters -Verbose:$VerbosePreference)) { $testResults = $false } } } return $testResults } |