DSCResources/MSFT_xExchReceiveConnector/MSFT_xExchReceiveConnector.psm1
|
<# .SYNOPSIS Gets the resource .PARAMETER Identity Identity of the Receive Connector. Needs to be in format SERVERNAME\CONNECTORNAME (no quotes) .PARAMETER Credential Credentials used to establish a remote PowerShell session to Exchange. .PARAMETER Ensure Whether the connector should be present or not. #> function Get-TargetResource { [Diagnostics.CodeAnalysis.SuppressMessageAttribute("PSDSCUseVerboseMessageInDSCResource", "")] [CmdletBinding()] [OutputType([System.Collections.Hashtable])] param ( [Parameter(Mandatory = $true)] [System.String] $Identity, [Parameter(Mandatory = $true)] [System.Management.Automation.PSCredential] [System.Management.Automation.Credential()] $Credential, [Parameter(Mandatory = $true)] [ValidateSet('Present', 'Absent')] [System.String] $Ensure ) Assert-IdentityIsValid -Identity $Identity Write-FunctionEntry -Parameters @{ 'Identity' = $Identity } -Verbose:$VerbosePreference # Establish remote PowerShell session Get-RemoteExchangeSession -Credential $Credential -CommandsToLoad 'Get-ReceiveConnector', 'Get-ADPermission' -Verbose:$VerbosePreference $connector = Get-ReceiveConnector -Identity $Identity -ErrorAction SilentlyContinue if ($null -ne $connector) { $adPermissions = Get-ADExtendedPermissions -Identity $Identity.Split('\')[1] $returnValue = @{ Identity = [System.String] $Identity AdvertiseClientSettings = [System.Boolean] $connector.AdvertiseClientSettings AuthTarpitInterval = [System.String] $connector.AuthTarpitInterval AuthMechanism = [System.String[]] $connector.AuthMechanism.ToString().Split(',').Trim() Banner = [System.String] $connector.Banner BareLinefeedRejectionEnabled = [System.Boolean] $connector.BareLinefeedRejectionEnabled BinaryMimeEnabled = [System.Boolean] $connector.BinaryMimeEnabled Bindings = [System.String[]] $connector.Bindings ChunkingEnabled = [System.Boolean] $connector.ChunkingEnabled Comment = [System.String] $connector.Comment ConnectionInactivityTimeout = [System.String] $connector.ConnectionInactivityTimeout ConnectionTimeout = [System.String] $connector.ConnectionTimeout DefaultDomain = [System.String] $connector.DefaultDomain DeliveryStatusNotificationEnabled = [System.Boolean] $connector.DeliveryStatusNotificationEnabled DomainSecureEnabled = [System.Boolean] $connector.DomainSecureEnabled EightBitMimeEnabled = [System.Boolean] $connector.EightBitMimeEnabled EnableAuthGSSAPI = [System.Boolean] $connector.EnableAuthGSSAPI Enabled = [System.Boolean] $connector.Enabled EnhancedStatusCodesEnabled = [System.Boolean] $connector.EnhancedStatusCodesEnabled ExtendedProtectionPolicy = [System.String] $connector.ExtendedProtectionPolicy ExtendedRightAllowEntries = [Microsoft.Management.Infrastructure.CimInstance[]] $adPermissions['ExtendedRightAllowEntries'] ExtendedRightDenyEntries = [Microsoft.Management.Infrastructure.CimInstance[]] $adPermissions['ExtendedRightDenyEntries'] Fqdn = [System.String] $connector.Fqdn LongAddressesEnabled = [System.Boolean] $connector.LongAddressesEnabled MaxAcknowledgementDelay = [System.String] $connector.MaxAcknowledgementDelay MaxHeaderSize = [System.String] $connector.MaxHeaderSize MaxHopCount = [System.Int32] $connector.MaxHopCount MaxInboundConnection = [System.String] $connector.MaxInboundConnection MaxInboundConnectionPercentagePerSource = [System.Int32] $connector.MaxInboundConnectionPercentagePerSource MaxInboundConnectionPerSource = [System.String] $connector.MaxInboundConnectionPerSource MaxLocalHopCount = [System.Int32] $connector.MaxLocalHopCount MaxLogonFailures = [System.Int32] $connector.MaxLogonFailures MaxMessageSize = [System.String] $connector.MaxMessageSize MaxProtocolErrors = [System.String] $connector.MaxProtocolErrors MaxRecipientsPerMessage = [System.Int32] $connector.MaxRecipientsPerMessage MessageRateLimit = [System.String] $connector.MessageRateLimit MessageRateSource = [System.String] $connector.MessageRateSource OrarEnabled = [System.Boolean] $connector.OrarEnabled PermissionGroups = [System.String[]] $connector.PermissionGroups.ToString().Split(',').Trim() PipeliningEnabled = [System.Boolean] $connector.PipeliningEnabled ProtocolLoggingLevel = [System.String] $connector.ProtocolLoggingLevel RemoteIPRanges = [System.String[]] $connector.RemoteIPRanges RequireEHLODomain = [System.Boolean] $connector.RequireEHLODomain RequireTLS = [System.Boolean] $connector.RequireTLS ServiceDiscoveryFqdn = [System.String] $connector.ServiceDiscoveryFqdn SizeEnabled = [System.String] $connector.SizeEnabled SuppressXAnonymousTls = [System.Boolean] $connector.SuppressXAnonymousTls TarpitInterval = [System.String] $connector.TarpitInterval TlsCertificateName = [System.String] $connector.TlsCertificateName TlsDomainCapabilities = [System.String[]] $connector.TlsDomainCapabilities TransportRole = [System.String] $connector.TransportRole Usage = [System.String[]] $connector.Usage Ensure = 'Present' } } else { $returnValue = @{ Ensure = 'Absent' } } $returnValue } <# .SYNOPSIS Sets the resource .PARAMETER Identity Identity of the Receive Connector. Needs to be in format SERVERNAME\CONNECTORNAME (no quotes) .PARAMETER Credential Credentials used to establish a remote PowerShell session to Exchange. .PARAMETER Ensure Whether the connector should be present or not. .PARAMETER AdvertiseClientSettings Specifies whether the SMTP server name,port number, and authentication settings for the Receive connector are displayed to users in the options of Outlook on the web. .PARAMETER AuthMechanism Specifies the advertised and accepted authentication mechanisms for the Receive connector. .PARAMETER AuthTarpitInterval Specifies the period of time to delay responses to failed authentication attempts from remote servers. .PARAMETER Banner Specifies a custom SMTP 220 banner that's displayed to remote messaging servers. .PARAMETER BareLinefeedRejectionEnabled Specifies whether this Receive connector rejects messages that contain line feed .PARAMETER BinaryMimeEnabled Specifies whether the BINARYMIME Extended SMTP extension is enabled or disabled. .PARAMETER Bindings Specifies the local IP address and TCP port number that's used by the Receive connector. .PARAMETER ChunkingEnabled Specifies whether the CHUNKING Extended SMTP extension is enabled or disabled. .PARAMETER Comment Specifies an optional comment. .PARAMETER ConnectionInactivityTimeout Specifies the maximum amount of idle time before a connection to the Receive connector is closed. .PARAMETER ConnectionTimeout Specifies the maximum time that the connection to the Receive connector can remain open .PARAMETER DefaultDomain Specifies the default accepted domain to use for the Exchange organization. .PARAMETER DeliveryStatusNotificationEnabled Specifies whether the DSN .PARAMETER DomainController Specifies the domain controller that's used by this cmdlet to read data from or write data to Active Directory. .PARAMETER DomainSecureEnabled Specifies whether to enable or disable mutual Transport Layer Security .PARAMETER EightBitMimeEnabled Specifies whether the 8BITMIME Extended SMTP extension is enabled or disabled. .PARAMETER EnableAuthGSSAPI enables or disables Kerberos when Integrated Windows authentication is available on the Receive connector. .PARAMETER Enabled Specifies whether to enable or disable the Receive connector. .PARAMETER EnhancedStatusCodesEnabled Specifies whether the ENHANCEDSTATUSCODES Extended SMTP extension is enabled or disabled. .PARAMETER ExtendedRightAllowEntries Additional allow permissions. .PARAMETER ExtendedRightDenyEntries Additional denz permissions. .PARAMETER ExtendedProtectionPolicy Specifies how you want to use Extended Protection for Authentication on the Receive connector. .PARAMETER Fqdn Specifies the destination FQDN that's shown to connected messaging servers. .PARAMETER LongAddressesEnabled Specifies whether the Receive connector accepts long X.400 email addresses. .PARAMETER MaxAcknowledgementDelay Specifies the period the transport server delays acknowledgement when receiving messages from a host that doesn't support shadow redundancy. .PARAMETER MaxHeaderSize Specifies the maximum size of the SMTP message header before the Receive connector closes the connection. .PARAMETER MaxHopCount Specifies the maximum number of hops that a message can take before the message is rejected by the Receive connector. .PARAMETER MaxInboundConnection Specifies the maximum number of inbound connections that this Receive connector serves at the same time. .PARAMETER MaxInboundConnectionPercentagePerSource Specifies the maximum number of connections that this Receive connector serves at the same time from a single IP address. .PARAMETER MaxInboundConnectionPerSource Specifies the maximum number of connections that a Receive connector serves at the same time from a single IP address .PARAMETER MaxLocalHopCount Specifies the maximum number of local hops that a message can take before the message is rejected by the Receive connector. .PARAMETER MaxLogonFailures pecifies the number of logon failures that the Receive connector retries before it closes the connection. .PARAMETER MaxMessageSize Specifies the maximum size of a message that's allowed through the Receive connector. .PARAMETER MaxProtocolErrors Specifies the maximum number of SMTP protocol errors that the Receive connector accepts before closing the connection. .PARAMETER MaxRecipientsPerMessage Specifies the maximum number of recipients per message that the Receive connector accepts before closing the connection. .PARAMETER MessageRateLimit Specifies the maximum number of messages that can be sent by a single client IP address per minute. .PARAMETER MessageRateSource Specifies how the message submission rate is calculated. .PARAMETER OrarEnabled enables or disables Originator Requested Alternate Recipient .PARAMETER PermissionGroups Specifies the well .PARAMETER PipeliningEnabled Specifies whether the PIPELINING Extended SMTP extension is enabled or disabled. .PARAMETER ProtocolLoggingLevel pecifies whether to enable or disable protocol logging. .PARAMETER RemoteIPRanges Specifies the remote IP addresses that the Receive connector accepts messages from. .PARAMETER RequireEHLODomain Specifies whether the client must provide a domain name in the EHLO handshake after the SMTP connection is established. .PARAMETER RequireTLS Specifies whether to require TLS transmission for inbound messages. .PARAMETER SizeEnabled Specifies how the SIZE Extended SMTP extension is used on the Receive connector. .PARAMETER SuppressXAnonymousTls Specifies whether the X .PARAMETER TarpitInterval Specifies the period of time to delay an SMTP response to a remote server that may be abusing the connection. .PARAMETER TlsCertificateName Specifies the X.509 certificate to use for TLS encryption. .PARAMETER TlsDomainCapabilities Specifies the capabilities that the Receive connector makes available to specific hosts outside of the organization. .PARAMETER TransportRole Specifies the transport service on the Mailbox server where the Receive connector is created. .PARAMETER Usage Specifies the default permission groups and authentication methods that are assigned to the Receive connector. #> function Set-TargetResource { [Diagnostics.CodeAnalysis.SuppressMessageAttribute("PSDSCUseVerboseMessageInDSCResource", "")] [CmdletBinding()] param ( [Parameter(Mandatory = $true)] [System.String] $Identity, [Parameter(Mandatory = $true)] [System.Management.Automation.PSCredential] [System.Management.Automation.Credential()] $Credential, [Parameter(Mandatory = $true)] [ValidateSet('Present', 'Absent')] [System.String] $Ensure, [Parameter()] [Microsoft.Management.Infrastructure.CimInstance[]] $ExtendedRightAllowEntries = @(), [Parameter()] [Microsoft.Management.Infrastructure.CimInstance[]] $ExtendedRightDenyEntries = @(), [Parameter()] [System.Boolean] $AdvertiseClientSettings, [Parameter()] [System.String] $AuthTarpitInterval, [Parameter()] [System.String[]] [ValidateSet('None', 'Tls', 'Integrated', 'BasicAuth', 'BasicAuthRequireTLS', 'ExchangeServer', 'ExternalAuthoritative')] $AuthMechanism, [Parameter()] [System.String] $Banner, [Parameter()] [System.Boolean] $BareLinefeedRejectionEnabled, [Parameter()] [System.Boolean] $BinaryMimeEnabled, [Parameter()] [System.String[]] $Bindings, [Parameter()] [System.Boolean] $ChunkingEnabled, [Parameter()] [System.String] $Comment, [Parameter()] [System.String] $ConnectionInactivityTimeout, [Parameter()] [System.String] $ConnectionTimeout, [Parameter()] [System.String] $DefaultDomain, [Parameter()] [System.String] $DomainController, [Parameter()] [System.Boolean] $DeliveryStatusNotificationEnabled, [Parameter()] [System.Boolean] $DomainSecureEnabled, [Parameter()] [System.Boolean] $EightBitMimeEnabled, [Parameter()] [System.Boolean] $EnableAuthGSSAPI, [Parameter()] [System.Boolean] $Enabled, [Parameter()] [System.Boolean] $EnhancedStatusCodesEnabled, [Parameter()] [ValidateSet('None', 'Allow', 'Require')] [System.String] $ExtendedProtectionPolicy, [Parameter()] [System.String] $Fqdn, [Parameter()] [System.Boolean] $LongAddressesEnabled, [Parameter()] [System.String] $MaxAcknowledgementDelay, [Parameter()] [System.String] $MaxHeaderSize, [Parameter()] [System.Int32] $MaxHopCount, [Parameter()] [System.String] $MaxInboundConnection, [Parameter()] [System.Int32] $MaxInboundConnectionPercentagePerSource, [Parameter()] [System.String] $MaxInboundConnectionPerSource, [Parameter()] [System.Int32] $MaxLocalHopCount, [Parameter()] [System.Int32] $MaxLogonFailures, [Parameter()] [System.String] $MaxMessageSize, [Parameter()] [System.String] $MaxProtocolErrors, [Parameter()] [System.Int32] $MaxRecipientsPerMessage, [Parameter()] [System.String] $MessageRateLimit, [Parameter()] [ValidateSet('None', 'IPAddress', 'User', 'All')] [System.String] $MessageRateSource, [Parameter()] [System.Boolean] $OrarEnabled, [Parameter()] [ValidateSet('None', 'AnonymousUsers', 'ExchangeUsers', 'ExchangeServers', 'ExchangeLegacyServers', 'Partners', 'Custom')] [System.String[]] $PermissionGroups, [Parameter()] [System.Boolean] $PipeliningEnabled, [Parameter()] [ValidateSet('None', 'Verbose')] [System.String] $ProtocolLoggingLevel, [Parameter()] [System.String[]] $RemoteIPRanges, [Parameter()] [System.Boolean] $RequireEHLODomain, [Parameter()] [System.Boolean] $RequireTLS, [Parameter()] [System.String] $ServiceDiscoveryFqdn, [Parameter()] [ValidateSet('Enabled', 'Disabled', 'EnabledWithoutValue')] [System.String] $SizeEnabled, [Parameter()] [System.Boolean] $SuppressXAnonymousTls, [Parameter()] [System.String] $TarpitInterval, [Parameter()] [System.String] $TlsCertificateName, [Parameter()] [System.String[]] $TlsDomainCapabilities, [Parameter()] [ValidateSet('FrontendTransport', 'HubTransport')] [System.String] $TransportRole, [Parameter()] [ValidateSet('Client', 'Internal', 'Internet', 'Partner', 'Custom')] [System.String] $Usage ) Assert-IdentityIsValid -Identity $Identity Write-FunctionEntry -Parameters @{ 'Identity' = $Identity } -Verbose:$VerbosePreference $connector = Get-TargetResource -Identity $Identity -Credential $Credential -Ensure $Ensure # Establish remote PowerShell session Get-RemoteExchangeSession -Credential $Credential -CommandsToLoad '*ReceiveConnector', '*ADPermission' -Verbose:$VerbosePreference if ($Ensure -eq 'Absent') { if ($connector['Ensure'] -eq 'Present') { Remove-FromPSBoundParametersUsingHashtable -PSBoundParametersIn $PSBoundParameters -ParamsToKeep 'Identity', 'DomainController' Write-Verbose -Message 'Removing the receive connector.' Remove-ReceiveConnector @PSBoundParameters -Confirm:$false } } else { # Remove Credential and Ensure so we don't pass it into the next command Remove-FromPSBoundParametersUsingHashtable -PSBoundParametersIn $PSBoundParameters -ParamsToRemove 'Credential', 'Ensure', 'ExtendedRightAllowEntries', 'ExtendedRightDenyEntries' Set-EmptyStringParamsToNull -PSBoundParametersIn $PSBoundParameters # We need to create the new connector if ($connector['Ensure'] -eq 'Absent') { # Create a copy of the original parameters $originalPSBoundParameters = @{ } + $PSBoundParameters # The following aren't valid for New-ReceiveConnector Remove-FromPSBoundParametersUsingHashtable -PSBoundParametersIn $PSBoundParameters -ParamsToRemove 'Identity', 'BareLinefeedRejectionEnabled' # Parse out the server name and connector name from the given Identity $serverName, $connectorName = $Identity.Split('\') # Add in server and name parameters Add-ToPSBoundParametersFromHashtable -PSBoundParametersIn $PSBoundParameters -ParamsToAdd @{ 'Server' = $serverName 'Name' = $connectorName } Write-Verbose -Message 'Creating the receive connector.' # Create the connector New-ReceiveConnector @PSBoundParameters # Add original props back Add-ToPSBoundParametersFromHashtable -PSBoundParametersIn $PSBoundParameters -ParamsToAdd $originalPSBoundParameters # Remove the two props we added Remove-FromPSBoundParametersUsingHashtable -PSBoundParametersIn $PSBoundParameters -ParamsToRemove 'Server', 'Name', 'Usage' Write-Verbose -Message 'Setting the receive connector properties.' Set-ReceiveConnector @PSBoundParameters if ($ExtendedRightAllowEntries -or $ExtendedRightDenyEntries) { $splat = @{ ExtendedRightAllowEntries = $ExtendedRightAllowEntries ExtendedRightDenyEntries = $ExtendedRightDenyEntries DomainController = $DomainController Identity = $Identity.Split('\')[1] NewObject = $true } Set-ADExtendedPermissions @splat -Verbose:$VerbosePreference } } else { # Usage is not a valid command for Set-ReceiveConnector Remove-FromPSBoundParametersUsingHashtable -PSBoundParametersIn $PSBoundParameters -ParamsToRemove 'Usage', 'ExtendedRightAllowEntries', 'ExtendedRightDenyEntries' Set-ReceiveConnector @PSBoundParameters # set AD permissions if ($ExtendedRightAllowEntries -or $ExtendedRightDenyEntries) { $splat = @{ ExtendedRightAllowEntries = $ExtendedRightAllowEntries ExtendedRightDenyEntries = $ExtendedRightDenyEntries DomainController = $DomainController Identity = $Identity.Split('\')[1] NewObject = $false } Set-ADExtendedPermissions @splat -Verbose:$VerbosePreference } } } } <# .SYNOPSIS Tests the resource .PARAMETER Identity Identity of the Receive Connector. Needs to be in format SERVERNAME\CONNECTORNAME (no quotes) .PARAMETER Credential Credentials used to establish a remote PowerShell session to Exchange. .PARAMETER Ensure Whether the connector should be present or not. .PARAMETER AdvertiseClientSettings Specifies whether the SMTP server name,port number, and authentication settings for the Receive connector are displayed to users in the options of Outlook on the web. .PARAMETER AuthMechanism Specifies the advertised and accepted authentication mechanisms for the Receive connector. .PARAMETER AuthTarpitInterval Specifies the period of time to delay responses to failed authentication attempts from remote servers. .PARAMETER Banner Specifies a custom SMTP 220 banner that's displayed to remote messaging servers. .PARAMETER BareLinefeedRejectionEnabled Specifies whether this Receive connector rejects messages that contain line feed .PARAMETER BinaryMimeEnabled Specifies whether the BINARYMIME Extended SMTP extension is enabled or disabled. .PARAMETER Bindings Specifies the local IP address and TCP port number that's used by the Receive connector. .PARAMETER ChunkingEnabled Specifies whether the CHUNKING Extended SMTP extension is enabled or disabled. .PARAMETER Comment Specifies an optional comment. .PARAMETER ConnectionInactivityTimeout Specifies the maximum amount of idle time before a connection to the Receive connector is closed. .PARAMETER ConnectionTimeout Specifies the maximum time that the connection to the Receive connector can remain open .PARAMETER DefaultDomain Specifies the default accepted domain to use for the Exchange organization. .PARAMETER DeliveryStatusNotificationEnabled Specifies whether the DSN .PARAMETER DomainController Specifies the domain controller that's used by this cmdlet to read data from or write data to Active Directory. .PARAMETER DomainSecureEnabled Specifies whether to enable or disable mutual Transport Layer Security .PARAMETER EightBitMimeEnabled Specifies whether the 8BITMIME Extended SMTP extension is enabled or disabled. .PARAMETER EnableAuthGSSAPI enables or disables Kerberos when Integrated Windows authentication is available on the Receive connector. .PARAMETER Enabled Specifies whether to enable or disable the Receive connector. .PARAMETER EnhancedStatusCodesEnabled Specifies whether the ENHANCEDSTATUSCODES Extended SMTP extension is enabled or disabled. .PARAMETER ExtendedRightAllowEntries Additional allow permissions. .PARAMETER ExtendedRightDenyEntries Additional deny permissions. .PARAMETER ExtendedProtectionPolicy Specifies how you want to use Extended Protection for Authentication on the Receive connector. .PARAMETER Fqdn Specifies the destination FQDN that's shown to connected messaging servers. .PARAMETER LongAddressesEnabled Specifies whether the Receive connector accepts long X.400 email addresses. .PARAMETER MaxAcknowledgementDelay Specifies the period the transport server delays acknowledgement when receiving messages from a host that doesn't support shadow redundancy. .PARAMETER MaxHeaderSize Specifies the maximum size of the SMTP message header before the Receive connector closes the connection. .PARAMETER MaxHopCount Specifies the maximum number of hops that a message can take before the message is rejected by the Receive connector. .PARAMETER MaxInboundConnection Specifies the maximum number of inbound connections that this Receive connector serves at the same time. .PARAMETER MaxInboundConnectionPercentagePerSource Specifies the maximum number of connections that this Receive connector serves at the same time from a single IP address. .PARAMETER MaxInboundConnectionPerSource Specifies the maximum number of connections that a Receive connector serves at the same time from a single IP address .PARAMETER MaxLocalHopCount Specifies the maximum number of local hops that a message can take before the message is rejected by the Receive connector. .PARAMETER MaxLogonFailures pecifies the number of logon failures that the Receive connector retries before it closes the connection. .PARAMETER MaxMessageSize Specifies the maximum size of a message that's allowed through the Receive connector. .PARAMETER MaxProtocolErrors Specifies the maximum number of SMTP protocol errors that the Receive connector accepts before closing the connection. .PARAMETER MaxRecipientsPerMessage Specifies the maximum number of recipients per message that the Receive connector accepts before closing the connection. .PARAMETER MessageRateLimit Specifies the maximum number of messages that can be sent by a single client IP address per minute. .PARAMETER MessageRateSource Specifies how the message submission rate is calculated. .PARAMETER OrarEnabled enables or disables Originator Requested Alternate Recipient .PARAMETER PermissionGroups Specifies the well .PARAMETER PipeliningEnabled Specifies whether the PIPELINING Extended SMTP extension is enabled or disabled. .PARAMETER ProtocolLoggingLevel pecifies whether to enable or disable protocol logging. .PARAMETER RemoteIPRanges Specifies the remote IP addresses that the Receive connector accepts messages from. .PARAMETER RequireEHLODomain Specifies whether the client must provide a domain name in the EHLO handshake after the SMTP connection is established. .PARAMETER RequireTLS Specifies whether to require TLS transmission for inbound messages. .PARAMETER SizeEnabled Specifies how the SIZE Extended SMTP extension is used on the Receive connector. .PARAMETER SuppressXAnonymousTls Specifies whether the X .PARAMETER TarpitInterval Specifies the period of time to delay an SMTP response to a remote server that may be abusing the connection. .PARAMETER TlsCertificateName Specifies the X.509 certificate to use for TLS encryption. .PARAMETER TlsDomainCapabilities Specifies the capabilities that the Receive connector makes available to specific hosts outside of the organization. .PARAMETER TransportRole Specifies the transport service on the Mailbox server where the Receive connector is created. .PARAMETER Usage Specifies the default permission groups and authentication methods that are assigned to the Receive connector. #> function Test-TargetResource { [Diagnostics.CodeAnalysis.SuppressMessageAttribute("PSDSCUseVerboseMessageInDSCResource", "")] [CmdletBinding()] [OutputType([System.Boolean])] param ( [Parameter(Mandatory = $true)] [System.String] $Identity, [Parameter(Mandatory = $true)] [System.Management.Automation.PSCredential] [System.Management.Automation.Credential()] $Credential, [Parameter(Mandatory = $true)] [ValidateSet('Present', 'Absent')] [System.String] $Ensure, [Parameter()] [Microsoft.Management.Infrastructure.CimInstance[]] $ExtendedRightAllowEntries = @(), [Parameter()] [Microsoft.Management.Infrastructure.CimInstance[]] $ExtendedRightDenyEntries = @(), [Parameter()] [System.Boolean] $AdvertiseClientSettings, [Parameter()] [System.String] $AuthTarpitInterval, [Parameter()] [System.String[]] [ValidateSet('None', 'Tls', 'Integrated', 'BasicAuth', 'BasicAuthRequireTLS', 'ExchangeServer', 'ExternalAuthoritative')] $AuthMechanism, [Parameter()] [System.String] $Banner, [Parameter()] [System.Boolean] $BareLinefeedRejectionEnabled, [Parameter()] [System.Boolean] $BinaryMimeEnabled, [Parameter()] [System.String[]] $Bindings, [Parameter()] [System.Boolean] $ChunkingEnabled, [Parameter()] [System.String] $Comment, [Parameter()] [System.String] $ConnectionInactivityTimeout, [Parameter()] [System.String] $ConnectionTimeout, [Parameter()] [System.String] $DefaultDomain, [Parameter()] [System.String] $DomainController, [Parameter()] [System.Boolean] $DeliveryStatusNotificationEnabled, [Parameter()] [System.Boolean] $DomainSecureEnabled, [Parameter()] [System.Boolean] $EightBitMimeEnabled, [Parameter()] [System.Boolean] $EnableAuthGSSAPI, [Parameter()] [System.Boolean] $Enabled, [Parameter()] [System.Boolean] $EnhancedStatusCodesEnabled, [Parameter()] [ValidateSet('None', 'Allow', 'Require')] [System.String] $ExtendedProtectionPolicy, [Parameter()] [System.String] $Fqdn, [Parameter()] [System.Boolean] $LongAddressesEnabled, [Parameter()] [System.String] $MaxAcknowledgementDelay, [Parameter()] [System.String] $MaxHeaderSize, [Parameter()] [System.Int32] $MaxHopCount, [Parameter()] [System.String] $MaxInboundConnection, [Parameter()] [System.Int32] $MaxInboundConnectionPercentagePerSource, [Parameter()] [System.String] $MaxInboundConnectionPerSource, [Parameter()] [System.Int32] $MaxLocalHopCount, [Parameter()] [System.Int32] $MaxLogonFailures, [Parameter()] [System.String] $MaxMessageSize, [Parameter()] [System.String] $MaxProtocolErrors, [Parameter()] [System.Int32] $MaxRecipientsPerMessage, [Parameter()] [System.String] $MessageRateLimit, [Parameter()] [ValidateSet('None', 'IPAddress', 'User', 'All')] [System.String] $MessageRateSource, [Parameter()] [System.Boolean] $OrarEnabled, [Parameter()] [ValidateSet('None', 'AnonymousUsers', 'ExchangeUsers', 'ExchangeServers', 'ExchangeLegacyServers', 'Partners', 'Custom')] [System.String[]] $PermissionGroups, [Parameter()] [System.Boolean] $PipeliningEnabled, [Parameter()] [ValidateSet('None', 'Verbose')] [System.String] $ProtocolLoggingLevel, [Parameter()] [System.String[]] $RemoteIPRanges, [Parameter()] [System.Boolean] $RequireEHLODomain, [Parameter()] [System.Boolean] $RequireTLS, [Parameter()] [System.String] $ServiceDiscoveryFqdn, [Parameter()] [ValidateSet('Enabled', 'Disabled', 'EnabledWithoutValue')] [System.String] $SizeEnabled, [Parameter()] [System.Boolean] $SuppressXAnonymousTls, [Parameter()] [System.String] $TarpitInterval, [Parameter()] [System.String] $TlsCertificateName, [Parameter()] [System.String[]] $TlsDomainCapabilities, [Parameter()] [ValidateSet('FrontendTransport', 'HubTransport')] [System.String] $TransportRole, [Parameter()] [ValidateSet('Client', 'Internal', 'Internet', 'Partner', 'Custom')] [System.String] $Usage ) Assert-IdentityIsValid -Identity $Identity Write-FunctionEntry -Parameters @{ 'Identity' = $Identity } -Verbose:$VerbosePreference $connector = Get-TargetResource -Identity $Identity -Credential $Credential -Ensure $Ensure # Establish remote PowerShell session Get-RemoteExchangeSession -Credential $Credential -CommandsToLoad 'Get-ReceiveConnector', 'Get-ADPermission' -Verbose:$VerbosePreference $testResults = $true if ($connector['Ensure'] -eq 'Absent') { if ($Ensure -eq 'Present') { Write-Verbose -Message 'Receive Connector should exist, but does not.' $testResults = $false } } else { if ($Ensure -eq 'Absent') { Write-Verbose -Message 'Receive Connector should not exist, but does.' $testResults = $false } else { # Get AD permissions if necessary if (($ExtendedRightAllowEntries) -or ($ExtendedRightDenyEntries)) { if ($PSBoundParameters.ContainsKey('DomainController')) { $adPermissions = Get-ADPermission -Identity $Identity.Split('\')[1] -DomainController $DomainController | Where-Object { $_.IsInherited -eq $false } } else { $adPermissions = Get-ADPermission -Identity $Identity.Split('\')[1] | Where-Object { $_.IsInherited -eq $false } } $splat = @{ ExtendedRightAllowEntries = $ExtendedRightAllowEntries ExtendedRightDenyEntries = $ExtendedRightDenyEntries ADPermissions = $adPermissions } $testResults = Test-ExtendedRights @splat -Verbose:$VerbosePreference } # remove "Custom" from PermissionGroups $connector.PermissionGroups = ($connector.PermissionGroups -split ',' ) -notmatch 'Custom' -join ',' if (!(Test-ExchangeSetting -Name 'AdvertiseClientSettings' -Type 'Boolean' -ExpectedValue $AdvertiseClientSettings -ActualValue $connector.AdvertiseClientSettings -PSBoundParametersIn $PSBoundParameters -Verbose:$VerbosePreference)) { $testResults = $false } if (!(Test-ExchangeSetting -Name 'AuthMechanism' -Type 'Array' -ExpectedValue $AuthMechanism -ActualValue (Convert-StringToArray -StringIn "$($connector.AuthMechanism)" -Verbose:$VerbosePreference) -PSBoundParametersIn $PSBoundParameters -Verbose:$VerbosePreference)) { $testResults = $false } if (!(Test-ExchangeSetting -Name 'AuthTarpitInterval' -Type 'Timespan' -ExpectedValue $AuthTarpitInterval -ActualValue $connector.AuthTarpitInterval -PSBoundParametersIn $PSBoundParameters -Verbose:$VerbosePreference)) { $testResults = $false } if (!(Test-ExchangeSetting -Name 'Banner' -Type 'String' -ExpectedValue $Banner -ActualValue $connector.Banner -PSBoundParametersIn $PSBoundParameters -Verbose:$VerbosePreference)) { $testResults = $false } if (!(Test-ExchangeSetting -Name 'BareLinefeedRejectionEnabled' -Type 'Boolean' -ExpectedValue $BareLinefeedRejectionEnabled -ActualValue $connector.BareLinefeedRejectionEnabled -PSBoundParametersIn $PSBoundParameters -Verbose:$VerbosePreference)) { $testResults = $false } if (!(Test-ExchangeSetting -Name 'BinaryMimeEnabled' -Type 'Boolean' -ExpectedValue $BinaryMimeEnabled -ActualValue $connector.BinaryMimeEnabled -PSBoundParametersIn $PSBoundParameters -Verbose:$VerbosePreference)) { $testResults = $false } if (!(Test-ExchangeSetting -Name 'Bindings' -Type 'Array' -ExpectedValue $Bindings -ActualValue $connector.Bindings -PSBoundParametersIn $PSBoundParameters -Verbose:$VerbosePreference)) { $testResults = $false } if (!(Test-ExchangeSetting -Name 'ChunkingEnabled' -Type 'Boolean' -ExpectedValue $ChunkingEnabled -ActualValue $connector.ChunkingEnabled -PSBoundParametersIn $PSBoundParameters -Verbose:$VerbosePreference)) { $testResults = $false } if (!(Test-ExchangeSetting -Name 'Comment' -Type 'String' -ExpectedValue $Comment -ActualValue $connector.Comment -PSBoundParametersIn $PSBoundParameters -Verbose:$VerbosePreference)) { $testResults = $false } if (!(Test-ExchangeSetting -Name 'ConnectionInactivityTimeout' -Type 'Timespan' -ExpectedValue $ConnectionInactivityTimeout -ActualValue $connector.ConnectionInactivityTimeout -PSBoundParametersIn $PSBoundParameters -Verbose:$VerbosePreference)) { $testResults = $false } if (!(Test-ExchangeSetting -Name 'ConnectionTimeout' -Type 'Timespan' -ExpectedValue $ConnectionTimeout -ActualValue $connector.ConnectionTimeout -PSBoundParametersIn $PSBoundParameters -Verbose:$VerbosePreference)) { $testResults = $false } if (!(Test-ExchangeSetting -Name 'DefaultDomain' -Type 'String' -ExpectedValue $DefaultDomain -ActualValue $connector.DefaultDomain -PSBoundParametersIn $PSBoundParameters -Verbose:$VerbosePreference)) { $testResults = $false } if (!(Test-ExchangeSetting -Name 'DeliveryStatusNotificationEnabled' -Type 'Boolean' -ExpectedValue $DeliveryStatusNotificationEnabled -ActualValue $connector.DeliveryStatusNotificationEnabled -PSBoundParametersIn $PSBoundParameters -Verbose:$VerbosePreference)) { $testResults = $false } if (!(Test-ExchangeSetting -Name 'DomainSecureEnabled' -Type 'Boolean' -ExpectedValue $DomainSecureEnabled -ActualValue $connector.DomainSecureEnabled -PSBoundParametersIn $PSBoundParameters -Verbose:$VerbosePreference)) { $testResults = $false } if (!(Test-ExchangeSetting -Name 'EightBitMimeEnabled' -Type 'Boolean' -ExpectedValue $EightBitMimeEnabled -ActualValue $connector.EightBitMimeEnabled -PSBoundParametersIn $PSBoundParameters -Verbose:$VerbosePreference)) { $testResults = $false } if (!(Test-ExchangeSetting -Name 'EnableAuthGSSAPI' -Type 'Boolean' -ExpectedValue $EnableAuthGSSAPI -ActualValue $connector.EnableAuthGSSAPI -PSBoundParametersIn $PSBoundParameters -Verbose:$VerbosePreference)) { $testResults = $false } if (!(Test-ExchangeSetting -Name 'Enabled' -Type 'Boolean' -ExpectedValue $Enabled -ActualValue $connector.Enabled -PSBoundParametersIn $PSBoundParameters -Verbose:$VerbosePreference)) { $testResults = $false } if (!(Test-ExchangeSetting -Name 'EnhancedStatusCodesEnabled' -Type 'Boolean' -ExpectedValue $EnhancedStatusCodesEnabled -ActualValue $connector.EnhancedStatusCodesEnabled -PSBoundParametersIn $PSBoundParameters -Verbose:$VerbosePreference)) { $testResults = $false } if (!(Test-ExchangeSetting -Name 'ExtendedProtectionPolicy' -Type 'String' -ExpectedValue $ExtendedProtectionPolicy -ActualValue $connector.ExtendedProtectionPolicy -PSBoundParametersIn $PSBoundParameters -Verbose:$VerbosePreference)) { $testResults = $false } if (!(Test-ExchangeSetting -Name 'Fqdn' -Type 'String' -ExpectedValue $Fqdn -ActualValue $connector.Fqdn -PSBoundParametersIn $PSBoundParameters -Verbose:$VerbosePreference)) { $testResults = $false } if (!(Test-ExchangeSetting -Name 'LongAddressesEnabled' -Type 'Boolean' -ExpectedValue $LongAddressesEnabled -ActualValue $connector.LongAddressesEnabled -PSBoundParametersIn $PSBoundParameters -Verbose:$VerbosePreference)) { $testResults = $false } if (!(Test-ExchangeSetting -Name 'MaxHopCount' -Type 'Int' -ExpectedValue $MaxHopCount -ActualValue $connector.MaxHopCount -PSBoundParametersIn $PSBoundParameters -Verbose:$VerbosePreference)) { $testResults = $false } if (!(Test-ExchangeSetting -Name 'MaxAcknowledgementDelay' -Type 'Timespan' -ExpectedValue $MaxAcknowledgementDelay -ActualValue $connector.MaxAcknowledgementDelay -PSBoundParametersIn $PSBoundParameters -Verbose:$VerbosePreference)) { $testResults = $false } if (!(Test-ExchangeSetting -Name 'MaxInboundConnection' -Type 'String' -ExpectedValue $MaxInboundConnection -ActualValue $connector.MaxInboundConnection -PSBoundParametersIn $PSBoundParameters -Verbose:$VerbosePreference)) { $testResults = $false } if (!(Test-ExchangeSetting -Name 'MaxInboundConnectionPercentagePerSource' -Type 'Int' -ExpectedValue $MaxInboundConnectionPercentagePerSource -ActualValue $connector.MaxInboundConnectionPercentagePerSource -PSBoundParametersIn $PSBoundParameters -Verbose:$VerbosePreference)) { $testResults = $false } if (!(Test-ExchangeSetting -Name 'MaxInboundConnectionPerSource' -Type 'String' -ExpectedValue $MaxInboundConnectionPerSource -ActualValue $connector.MaxInboundConnectionPerSource -PSBoundParametersIn $PSBoundParameters -Verbose:$VerbosePreference)) { $testResults = $false } if (!(Test-ExchangeSetting -Name 'MaxHeaderSize' -Type 'ByteQuantifiedSize' -ExpectedValue $MaxHeaderSize -ActualValue $connector.MaxHeaderSize -PSBoundParametersIn $PSBoundParameters -Verbose:$VerbosePreference)) { $testResults = $false } if (!(Test-ExchangeSetting -Name 'MaxLocalHopCount' -Type 'Int' -ExpectedValue $MaxLocalHopCount -ActualValue $connector.MaxLocalHopCount -PSBoundParametersIn $PSBoundParameters -Verbose:$VerbosePreference)) { $testResults = $false } if (!(Test-ExchangeSetting -Name 'MaxLogonFailures' -Type 'Int' -ExpectedValue $MaxLogonFailures -ActualValue $connector.MaxLogonFailures -PSBoundParametersIn $PSBoundParameters -Verbose:$VerbosePreference)) { $testResults = $false } if (!(Test-ExchangeSetting -Name 'MaxMessageSize' -Type 'ByteQuantifiedSize' -ExpectedValue $MaxMessageSize -ActualValue $connector.MaxMessageSize -PSBoundParametersIn $PSBoundParameters -Verbose:$VerbosePreference)) { $testResults = $false } if (!(Test-ExchangeSetting -Name 'MaxProtocolErrors' -Type 'String' -ExpectedValue $MaxProtocolErrors -ActualValue $connector.MaxProtocolErrors -PSBoundParametersIn $PSBoundParameters -Verbose:$VerbosePreference)) { $testResults = $false } if (!(Test-ExchangeSetting -Name 'MaxRecipientsPerMessage' -Type 'Int' -ExpectedValue $MaxRecipientsPerMessage -ActualValue $connector.MaxRecipientsPerMessage -PSBoundParametersIn $PSBoundParameters -Verbose:$VerbosePreference)) { $testResults = $false } if (!(Test-ExchangeSetting -Name 'MessageRateLimit' -Type 'String' -ExpectedValue $MessageRateLimit -ActualValue $connector.MessageRateLimit -PSBoundParametersIn $PSBoundParameters -Verbose:$VerbosePreference)) { $testResults = $false } if (!(Test-ExchangeSetting -Name 'MessageRateSource' -Type 'String' -ExpectedValue $MessageRateSource -ActualValue $connector.MessageRateSource -PSBoundParametersIn $PSBoundParameters -Verbose:$VerbosePreference)) { $testResults = $false } if (!(Test-ExchangeSetting -Name 'OrarEnabled' -Type 'Boolean' -ExpectedValue $OrarEnabled -ActualValue $connector.OrarEnabled -PSBoundParametersIn $PSBoundParameters -Verbose:$VerbosePreference)) { $testResults = $false } if (!(Test-ExchangeSetting -Name 'PermissionGroups' -Type 'Array' -ExpectedValue $PermissionGroups -ActualValue (Convert-StringToArray -StringIn $connector.PermissionGroups -Separator ',') -PSBoundParametersIn $PSBoundParameters -Verbose:$VerbosePreference)) { $testResults = $false } if (!(Test-ExchangeSetting -Name 'PipeliningEnabled' -Type 'Boolean' -ExpectedValue $PipeliningEnabled -ActualValue $connector.PipeliningEnabled -PSBoundParametersIn $PSBoundParameters -Verbose:$VerbosePreference)) { $testResults = $false } if (!(Test-ExchangeSetting -Name 'ProtocolLoggingLevel' -Type 'String' -ExpectedValue $ProtocolLoggingLevel -ActualValue $connector.ProtocolLoggingLevel -PSBoundParametersIn $PSBoundParameters -Verbose:$VerbosePreference)) { $testResults = $false } if (!(Test-ExchangeSetting -Name 'RemoteIPRanges' -Type 'Array' -ExpectedValue $RemoteIPRanges -ActualValue $connector.RemoteIPRanges -PSBoundParametersIn $PSBoundParameters -Verbose:$VerbosePreference)) { $testResults = $false } if (!(Test-ExchangeSetting -Name 'RequireEHLODomain' -Type 'Boolean' -ExpectedValue $RequireEHLODomain -ActualValue $connector.RequireEHLODomain -PSBoundParametersIn $PSBoundParameters -Verbose:$VerbosePreference)) { $testResults = $false } if (!(Test-ExchangeSetting -Name 'RequireTLS' -Type 'Boolean' -ExpectedValue $RequireTLS -ActualValue $connector.RequireTLS -PSBoundParametersIn $PSBoundParameters -Verbose:$VerbosePreference)) { $testResults = $false } if (!(Test-ExchangeSetting -Name 'ServiceDiscoveryFqdn' -Type 'String' -ExpectedValue $ServiceDiscoveryFqdn -ActualValue $connector.ServiceDiscoveryFqdn -PSBoundParametersIn $PSBoundParameters -Verbose:$VerbosePreference)) { $testResults = $false } if (!(Test-ExchangeSetting -Name 'SizeEnabled' -Type 'String' -ExpectedValue $SizeEnabled -ActualValue $connector.SizeEnabled -PSBoundParametersIn $PSBoundParameters -Verbose:$VerbosePreference)) { $testResults = $false } if (!(Test-ExchangeSetting -Name 'SuppressXAnonymousTls' -Type 'Boolean' -ExpectedValue $SuppressXAnonymousTls -ActualValue $connector.SuppressXAnonymousTls -PSBoundParametersIn $PSBoundParameters -Verbose:$VerbosePreference)) { $testResults = $false } if (!(Test-ExchangeSetting -Name 'TarpitInterval' -Type 'Timespan' -ExpectedValue $TarpitInterval -ActualValue $connector.TarpitInterval -PSBoundParametersIn $PSBoundParameters -Verbose:$VerbosePreference)) { $testResults = $false } if (!(Test-ExchangeSetting -Name 'TlsCertificateName' -Type 'String' -ExpectedValue $TlsCertificateName -ActualValue $connector.TlsCertificateName -PSBoundParametersIn $PSBoundParameters -Verbose:$VerbosePreference)) { $testResults = $false } if (!(Test-ExchangeSetting -Name 'TlsDomainCapabilities' -Type 'Array' -ExpectedValue $TlsDomainCapabilities -ActualValue $connector.TlsDomainCapabilities -PSBoundParametersIn $PSBoundParameters -Verbose:$VerbosePreference)) { $testResults = $false } if (!(Test-ExchangeSetting -Name 'TransportRole' -Type 'String' -ExpectedValue $TransportRole -ActualValue $connector.TransportRole -PSBoundParametersIn $PSBoundParameters -Verbose:$VerbosePreference)) { $testResults = $false } } } return $testResults } # Ensure that a connector Identity is in the proper form function Assert-IdentityIsValid { param ( [Parameter()] [System.String] $Identity ) if ([System.String]::IsNullOrEmpty($Identity) -or !($Identity.Contains('\'))) { throw "Identity must be in the format: 'SERVERNAME\Connector Name' (No quotes)" } } Export-ModuleMember -Function *-TargetResource |