DSCResources/MSFT_xExchMaintenanceMode/MSFT_xExchMaintenanceMode.psm1
|
function Get-TargetResource { [Diagnostics.CodeAnalysis.SuppressMessageAttribute("PSDSCUseVerboseMessageInDSCResource", "")] [CmdletBinding()] [OutputType([System.Collections.Hashtable])] param ( [Parameter(Mandatory = $true)] [System.Boolean] $Enabled, [Parameter(Mandatory = $true)] [System.Management.Automation.PSCredential] [System.Management.Automation.Credential()] $Credential, [Parameter()] [System.String[]] $AdditionalComponentsToActivate, [Parameter()] [System.String] $DomainController, [Parameter()] [ValidateSet('None', 'Lossless', 'GoodAvailability', 'BestAvailability', 'BestEffort')] [System.String] $MountDialOverride = 'None', [Parameter()] [System.Boolean] $MovePreferredDatabasesBack = $false, [Parameter()] [System.Boolean] $SetInactiveComponentsFromAnyRequesterToActive = $false, [Parameter()] [System.Boolean] $SkipActiveCopyChecks = $false, [Parameter()] [System.Boolean] $SkipAllChecks = $false, [Parameter()] [System.Boolean] $SkipClientExperienceChecks = $false, [Parameter()] [System.Boolean] $SkipCpuChecks = $false, [Parameter()] [System.Boolean] $SkipHealthChecks = $false, [Parameter()] [System.Boolean] $SkipLagChecks = $false, [Parameter()] [System.Boolean] $SkipMaximumActiveDatabasesChecks = $false, [Parameter()] [System.Boolean] $SkipMoveSuppressionChecks = $false, [Parameter()] [System.String] $UpgradedServerVersion ) Write-FunctionEntry -Parameters @{ 'Enabled' = $Enabled } -Verbose:$VerbosePreference # Load TransportMaintenanceMode Helper Import-Module "$((Get-Item -LiteralPath "$($PSScriptRoot)"))\TransportMaintenance.psm1" -Verbose:0 # Establish remote PowerShell session Get-RemoteExchangeSession -Credential $Credential -CommandsToLoad 'Get-*' -Verbose:$VerbosePreference $maintenanceModeStatus = Get-MaintenanceModeStatus -EnteringMaintenanceMode $Enabled -DomainController $DomainController $atDesiredVersion = Test-ExchangeAtDesiredVersion -DomainController $DomainController -UpgradedServerVersion $UpgradedServerVersion if ($null -ne $maintenanceModeStatus) { # Determine which components are Active $activeComponents = $maintenanceModeStatus.ServerComponentState | Where-Object -FilterScript { $_.State -eq "Active" } [System.String[]] $activeComponentsList = @() if ($null -ne $activeComponents) { foreach ($activeComponent in $activeComponents) { $activeComponentsList += $activeComponent.Component } } $activeComponentCount = $activeComponentsList.Count # Figure out what our Enabled state should really be in case UpgradedServerVersion was passed $isEnabled = $Enabled if ($Enabled -eq $true -and $atDesiredVersion -eq $true) { $isEnabled = $false } $returnValue = @{ Enabled = [System.Boolean] $isEnabled ActiveComponentCount = [System.Int32] $activeComponentCount ActiveComponentsList = [System.String[]] $activeComponentsList ActiveDBCount = [System.Int32] (Get-ActiveDBCount -MaintenanceModeStatus $maintenanceModeStatus -DomainController $DomainController) ActiveUMCallCount = [System.Int32] (Get-UMCallCount -MaintenanceModeStatus $maintenanceModeStatus -DomainController $DomainController) ClusterState = [System.String] $maintenanceModeStatus.ClusterNode.State QueuedMessageCount = [System.Int32] (Get-QueueMessageCount -MaintenanceModeStatus $maintenanceModeStatus) } } $returnValue } function Set-TargetResource { [Diagnostics.CodeAnalysis.SuppressMessageAttribute("PSUseShouldProcessForStateChangingFunctions", "")] [CmdletBinding()] param ( [Parameter(Mandatory = $true)] [System.Boolean] $Enabled, [Parameter(Mandatory = $true)] [System.Management.Automation.PSCredential] [System.Management.Automation.Credential()] $Credential, [Parameter()] [System.String[]] $AdditionalComponentsToActivate, [Parameter()] [System.String] $DomainController, [Parameter()] [ValidateSet('None', 'Lossless', 'GoodAvailability', 'BestAvailability', 'BestEffort')] [System.String] $MountDialOverride = 'None', [Parameter()] [System.Boolean] $MovePreferredDatabasesBack = $false, [Parameter()] [System.Boolean] $SetInactiveComponentsFromAnyRequesterToActive = $false, [Parameter()] [System.Boolean] $SkipActiveCopyChecks = $false, [Parameter()] [System.Boolean] $SkipAllChecks = $false, [Parameter()] [System.Boolean] $SkipClientExperienceChecks = $false, [Parameter()] [System.Boolean] $SkipCpuChecks = $false, [Parameter()] [System.Boolean] $SkipHealthChecks = $false, [Parameter()] [System.Boolean] $SkipLagChecks = $false, [Parameter()] [System.Boolean] $SkipMaximumActiveDatabasesChecks = $false, [Parameter()] [System.Boolean] $SkipMoveSuppressionChecks = $false, [Parameter()] [System.String] $UpgradedServerVersion ) Write-FunctionEntry -Parameters @{ 'Enabled' = $Enabled } -Verbose:$VerbosePreference # Load TransportMaintenanceMode Helper Import-Module "$((Get-Item -LiteralPath "$($PSScriptRoot)"))\TransportMaintenance.psm1" -Verbose:0 # Get ready for calling DAG maintenance scripts later $scriptsFolder = Join-Path -Path ((Get-ItemProperty HKLM:\SOFTWARE\Microsoft\ExchangeServer\v15\Setup).MsiInstallPath) -ChildPath "Scripts" $startDagServerMaintenanceScript = Join-Path -Path "$($scriptsFolder)" -ChildPath "StartDagServerMaintenance.ps1" $stopDagServerMaintenanceScript = Join-Path -Path "$($scriptsFolder)" -ChildPath "StopDagServerMaintenance.ps1" # Override Write-Host, as it is used by the target scripts, and causes a DSC error since the session is not interactive New-Alias Write-Host Write-Verbose # Check if setup is running. $setupRunning = Test-ExchangeSetupRunning if ($setupRunning -eq $true) { Write-Verbose -Message 'Exchange Setup is currently running. Skipping maintenance mode checks.' return } # Establish remote PowerShell session Get-RemoteExchangeSession -Credential $Credential -CommandsToLoad '*' -Verbose:$VerbosePreference # If the request is to put the server in maintenance mode, make sure we aren't already at the (optional) requested Exchange Server version $atDesiredVersion = Test-ExchangeAtDesiredVersion -DomainController $DomainController -UpgradedServerVersion $UpgradedServerVersion if ($Enabled -eq $true -and $atDesiredVersion -eq $true) { Write-Verbose -Message "Server is already at or above the desired upgrade version of '$UpgradedServerVersion'. Skipping putting server into maintenance mode." return } # Continue on with setting the maintenance mode state $maintenanceModeStatus = Get-MaintenanceModeStatus -EnteringMaintenanceMode $Enabled -DomainController $DomainController if ($null -ne $maintenanceModeStatus) { # Set vars relevant to both 'Enabled' code paths $htStatus = $MaintenanceModeStatus.ServerComponentState | Where-Object -FilterScript { $_.Component -eq "HubTransport" } $haStatus = $MaintenanceModeStatus.ServerComponentState | Where-Object -FilterScript { $_.Component -eq "HubTransport" } # Put the server into maintenance mode if ($Enabled -eq $true) { # Block DB activation on this server if ($maintenanceModeStatus.MailboxServer.DatabaseCopyAutoActivationPolicy -ne "Blocked") { Write-Verbose -Message 'Setting DatabaseCopyAutoActivationPolicy to Blocked' Set-MailboxServerInternal -Identity $env:COMPUTERNAME -DomainController $DomainController -AdditionalParams @{ "DatabaseCopyAutoActivationPolicy" = "Blocked" } } # Set UM to draining before anything else $changedUM = Update-ComponentState -Component "UMCallRouter" -Requester "Maintenance" -ServerComponentState $maintenanceModeStatus.ServerComponentState -State "Draining" -SetInactiveComponentsFromAnyRequesterToActive $SetInactiveComponentsFromAnyRequesterToActive -DomainController $DomainController # Start HT maintenance if required if ($htStatus.State -ne "Inactive") { Write-Verbose -Message 'Entering Transport Maintenance' [System.String[]] $transportExclusions = Get-ExclusionsForMessageRedirection -DomainController $DomainController Start-TransportMaintenance -LoadLocalShell $false -MessageRedirectExclusions $transportExclusions -Verbose } # Wait for remaining UM calls to drain if ($changedUM) { Wait-ForUMToDrain -DomainController $DomainController } # Run StartDagServerMaintenance script to put cluster offline and failover DB's if ($maintenanceModeStatus.ClusterNode.State -eq "Up" -or $maintenanceModeStatus.MailboxServer.DatabaseCopyAutoActivationPolicy -ne "Blocked" -or (Get-ActiveDBCount -MaintenanceModeStatus $maintenanceModeStatus -DomainController $DomainController) -ne 0) { Write-Verbose -Message 'Running StartDagServerMaintenance.ps1' $dagMemberCount = Get-DAGMemberCount # Setup parameters for StartDagServerMaintenance.ps1 $startDagScriptParams = @{ serverName = $env:COMPUTERNAME Verbose = $true } if ((Get-ExchangeVersionYear) -in '2016', '2019') { $startDagScriptParams.Add('pauseClusterNode', $true) } if ($dagMemberCount -ne 0 -and $dagMemberCount -le 2) { $startDagScriptParams.Add('overrideMinimumTwoCopies', $true) } if ($SkipAllChecks -or $SkipMoveSuppressionChecks) { $startDagScriptParams.Add("Force", 'true') } # Execute StartDagServerMaintenance.ps1 Invoke-DotSourcedScript ` -ScriptPath $startDagServerMaintenanceScript ` -ScriptParams $startDagScriptParams ` -SnapinsToRemove 'Microsoft.Exchange.Management.Powershell.E2010' ` -Verbose:$VerbosePreference } # Set remaining components to offline Update-ComponentState -Component "ServerWideOffline" -Requester "Maintenance" -ServerComponentState $maintenanceModeStatus.ServerComponentState -State "Inactive" -SetInactiveComponentsFromAnyRequesterToActive $SetInactiveComponentsFromAnyRequesterToActive -DomainController $DomainController | Out-Null # Check whether we are actually in maintenance mode $testResults = Test-TargetResource @PSBoundParameters if ($testResults -eq $false) { throw "Server is not fully in maintenance mode after running through steps to enable maintenance mode." } } # Take the server out of maintenance mode else { # Bring ServerWideOffline and UMCallRouter back online Update-ComponentState -Component "ServerWideOffline" -Requester "Maintenance" -ServerComponentState $maintenanceModeStatus.ServerComponentState -State "Active" -SetInactiveComponentsFromAnyRequesterToActive $SetInactiveComponentsFromAnyRequesterToActive -DomainController $DomainController | Out-Null Update-ComponentState -Component "UMCallRouter" -Requester "Maintenance" -ServerComponentState $maintenanceModeStatus.ServerComponentState -State "Active" -SetInactiveComponentsFromAnyRequesterToActive $SetInactiveComponentsFromAnyRequesterToActive -DomainController $DomainController | Out-Null # Run StopDagServerMaintenance.ps1 if required if ($maintenanceModeStatus.ClusterNode.State -ne "Up" -or ` $maintenanceModeStatus.MailboxServer.DatabaseCopyAutoActivationPolicy -ne "Unrestricted" -or ` $haStatus.State -ne "Active") { Write-Verbose -Message 'Running StopDagServerMaintenance.ps1' # Run StopDagServerMaintenance.ps1 in try/catch, so if an exception occurs, we can at least finish # doing the rest of the steps to take the server out of maintenance mode try { $stopScriptParams = @{ serverName = $env:COMPUTERNAME Verbose = $true } Invoke-DotSourcedScript ` -ScriptPath $stopDagServerMaintenanceScript ` -ScriptParams $stopScriptParams ` -SnapinsToRemove 'Microsoft.Exchange.Management.Powershell.E2010' ` -Verbose:$VerbosePreference } catch { Write-Error "Caught exception running StopDagServerMaintenance.ps1: $($_.Exception.Message)" } } # End Transport Maintenance if ($htStatus.State -ne "Active") { Write-Verbose -Message 'Ending Transport Maintenance' Stop-TransportMaintenance -LoadLocalShell $false -Verbose } # Bring components online that may have been taken offline by a failed setup run Update-ComponentState -Component "Monitoring" -Requester "Functional" -ServerComponentState $maintenanceModeStatus.ServerComponentState -State "Active" -SetInactiveComponentsFromAnyRequesterToActive $SetInactiveComponentsFromAnyRequesterToActive -DomainController $DomainController | Out-Null Update-ComponentState -Component "RecoveryActionsEnabled" -Requester "Functional" -ServerComponentState $maintenanceModeStatus.ServerComponentState -State "Active" -SetInactiveComponentsFromAnyRequesterToActive $SetInactiveComponentsFromAnyRequesterToActive -DomainController $DomainController | Out-Null # Bring online any specifically requested components if ($null -ne $AdditionalComponentsToActivate) { foreach ($component in $AdditionalComponentsToActivate) { if ((Test-ComponentCheckedByDefault -ComponentName $component) -eq $false) { $status = $null $status = $MaintenanceModeStatus.ServerComponentState | Where-Object -FilterScript { $_.Component -like "$($component)" } if ($null -ne $status -and $status.State -ne 'Active') { Update-ComponentState -Component $component -Requester "Functional" -ServerComponentState $maintenanceModeStatus.ServerComponentState -State "Active" -SetInactiveComponentsFromAnyRequesterToActive $SetInactiveComponentsFromAnyRequesterToActive -DomainController $DomainController | Out-Null } } } } if ($MovePreferredDatabasesBack -eq $true) { Move-PrimaryDatabasesBack -DomainController $DomainController -MountDialOverride $MountDialOverride -SkipActiveCopyChecks $SkipActiveCopyChecks -SkipAllChecks $SkipAllChecks -SkipClientExperienceChecks $SkipClientExperienceChecks -SkipCpuChecks $SkipCpuChecks -SkipHealthChecks $SkipHealthChecks -SkipLagChecks $SkipLagChecks -SkipMaximumActiveDatabasesChecks $SkipMaximumActiveDatabasesChecks -SkipMoveSuppressionChecks $SkipMoveSuppressionChecks } } } else { throw "Failed to retrieve maintenance mode status of server." } Remove-Item Alias:Write-Host -ErrorAction SilentlyContinue } function Test-TargetResource { [CmdletBinding()] [OutputType([System.Boolean])] param ( [Parameter(Mandatory = $true)] [System.Boolean] $Enabled, [Parameter(Mandatory = $true)] [System.Management.Automation.PSCredential] [System.Management.Automation.Credential()] $Credential, [Parameter()] [System.String[]] $AdditionalComponentsToActivate, [Parameter()] [System.String] $DomainController, [Parameter()] [ValidateSet('None', 'Lossless', 'GoodAvailability', 'BestAvailability', 'BestEffort')] [System.String] $MountDialOverride = 'None', [Parameter()] [System.Boolean] $MovePreferredDatabasesBack = $false, [Parameter()] [System.Boolean] $SetInactiveComponentsFromAnyRequesterToActive = $false, [Parameter()] [System.Boolean] $SkipActiveCopyChecks = $false, [Parameter()] [System.Boolean] $SkipAllChecks = $false, [Parameter()] [System.Boolean] $SkipClientExperienceChecks = $false, [Parameter()] [System.Boolean] $SkipCpuChecks = $false, [Parameter()] [System.Boolean] $SkipHealthChecks = $false, [Parameter()] [System.Boolean] $SkipLagChecks = $false, [Parameter()] [System.Boolean] $SkipMaximumActiveDatabasesChecks = $false, [Parameter()] [System.Boolean] $SkipMoveSuppressionChecks = $false, [Parameter()] [System.String] $UpgradedServerVersion ) Write-FunctionEntry -Parameters @{ 'Enabled' = $Enabled } -Verbose:$VerbosePreference # Load TransportMaintenanceMode Helper Import-Module "$((Get-Item -LiteralPath "$($PSScriptRoot)"))\TransportMaintenance.psm1" -Verbose:0 $setupRunning = Test-ExchangeSetupRunning if ($setupRunning -eq $true) { Write-Verbose -Message 'Exchange Setup is currently running. Skipping maintenance mode checks.' return $true } # Establish remote PowerShell session Get-RemoteExchangeSession -Credential $Credential -CommandsToLoad 'Get-*' -Verbose:$VerbosePreference $serverVersion = Get-ExchangeVersionYear $maintenanceModeStatus = Get-MaintenanceModeStatus -EnteringMaintenanceMode $Enabled -DomainController $DomainController $testResults = $true if ($null -eq $maintenanceModeStatus) { Write-Error -Message "Failed to retrieve maintenance mode status for server." $testResults = $false } else { # Make sure server is fully in maintenance mode if ($Enabled -eq $true) { $atDesiredVersion = Test-ExchangeAtDesiredVersion -DomainController $DomainController -UpgradedServerVersion $UpgradedServerVersion if ($atDesiredVersion -eq $true) { Write-Verbose -Message "Server is already at or above the desired upgrade version of '$UpgradedServerVersion'. Skipping putting server into maintenance mode." return $true } else { if ($maintenanceModeStatus.MailboxServer.DatabaseCopyAutoActivationPolicy -ne "Blocked") { Write-Verbose -Message 'DatabaseCopyAutoActivationPolicy is not set to Blocked' $testResults = $false } if ($null -ne ($MaintenanceModeStatus.ServerComponentState | Where-Object -FilterScript { $_.State -ne "Inactive" -and $_.Component -ne "Monitoring" -and $_.Component -ne "RecoveryActionsEnabled" })) { Write-Verbose -Message 'One or more components have a status other than Inactive' $testResults = $false } if ($maintenanceModeStatus.ClusterNode.State -eq "Up") { Write-Verbose -Message 'Cluster node has a status of Up' $testResults = $false } if ((Test-ServerIsPAM -DomainController $DomainController) -eq $true) { Write-Verbose -Message 'Server still has the Primary Active Manager role' $testResults = $false } [int] $messagesQueued = Get-QueueMessageCount -MaintenanceModeStatus $maintenanceModeStatus if ($messagesQueued -gt 0) { Write-Verbose -Message "Found $messagesQueued messages still in queue" $testResults = $false } [int] $activeDBCount = Get-ActiveDBCount -MaintenanceModeStatus $maintenanceModeStatus -DomainController $DomainController if ($activeDBCount -gt 0) { Write-Verbose -Message "Found $activeDBCount replicated databases still activated on this server" $testResults = $false } [int] $umCallCount = Get-UMCallCount -MaintenanceModeStatus $maintenanceModeStatus -DomainController $DomainController if ($umCallCount -gt 0) { Write-Verbose -Message "Found $umCallCount active UM calls on this server" $testResults = $false } } } # Make sure the server is fully out of maintenance mode else { $activeComponents = $MaintenanceModeStatus.ServerComponentState | Where-Object -FilterScript { $_.State -eq "Active" } if ($null -eq $activeComponents) { Write-Verbose -Message 'No Components found with a status of Active' $testResults = $false } if ($null -eq ($activeComponents | Where-Object -FilterScript { $_.Component -eq "ServerWideOffline" })) { Write-Verbose -Message 'Component ServerWideOffline is not Active' $testResults = $false } if ($serverVersion -in '2013', '2016') { if ($null -eq ($activeComponents | Where-Object -FilterScript { $_.Component -eq "UMCallRouter" })) { Write-Verbose -Message 'Component UMCallRouter is not Active' $testResults = $false } } if ($null -eq ($activeComponents | Where-Object -FilterScript { $_.Component -eq "HubTransport" })) { Write-Verbose -Message 'Component HubTransport is not Active' $testResults = $false } if ($maintenanceModeStatus.ClusterNode.State -ne "Up") { Write-Verbose -Message "Cluster node has a status of $($maintenanceModeStatus.ClusterNode.State)" $testResults = $false } if ($maintenanceModeStatus.MailboxServer.DatabaseCopyAutoActivationPolicy -ne "Unrestricted") { Write-Verbose -Message "DatabaseCopyAutoActivationPolicy is set to $($maintenanceModeStatus.MailboxServer.DatabaseCopyAutoActivationPolicy)" $testResults = $false } if ($null -eq ($activeComponents | Where-Object -FilterScript { $_.Component -eq "Monitoring" })) { Write-Verbose -Message 'Component Monitoring is not Active' $testResults = $false } if ($null -eq ($activeComponents | Where-Object -FilterScript { $_.Component -eq "RecoveryActionsEnabled" })) { Write-Verbose -Message 'Component RecoveryActionsEnabled is not Active' $testResults = $false } if ($null -ne $AdditionalComponentsToActivate) { foreach ($component in $AdditionalComponentsToActivate) { if ((Test-ComponentCheckedByDefault -ComponentName $component) -eq $false) { $status = $null $status = $MaintenanceModeStatus.ServerComponentState | Where-Object -FilterScript { $_.Component -like "$($component)" } if ($null -ne $status -and $Status.State -ne "Active") { Write-Verbose -Message "Component $component is not set to Active" $testResults = $false } } } } } } return $testResults } # Gets a Hashtable containing various objects from Exchange that will be used to determine maintenance mode status function Get-MaintenanceModeStatus { [CmdletBinding()] [OutputType([System.Collections.Hashtable])] param ( [Parameter()] [System.String] $DomainController, [Parameter()] [System.Boolean] $EnteringMaintenanceMode = $true ) Remove-FromPSBoundParametersUsingHashtable -PSBoundParametersIn $PSBoundParameters -ParamsToKeep 'DomainController' $serverComponentState = Get-ServerComponentStateInternal -Identity $env:COMPUTERNAME -DomainController $DomainController $clusterNode = Get-ClusterNode -Name $env:COMPUTERNAME $dbCopyStatus = Get-MailboxDatabaseCopyStatusInternal -Server $env:COMPUTERNAME -DomainController $DomainController $umCalls = Get-UMActiveCallsInternal -Server $env:COMPUTERNAME -DomainController $DomainController $mailboxServer = Get-MailboxServerInternal -Identity $env:COMPUTERNAME -DomainController $DomainController $queues = Get-Queue -Server $env:COMPUTERNAME -ErrorAction SilentlyContinue # If we're checking queues too soon after restarting Transport, Get-Queue may fail. Wait for bootloader to be active and try again. if ($null -eq $queues -and $EnteringMaintenanceMode -eq $true) { $endTime = [DateTime]::Now.AddMinutes(5) Write-Verbose -Message "Waiting up to 5 minutes for the Transport Bootloader to be ready before running Get-Queue. Wait started at $([DateTime]::Now)." while ($null -eq $queues -and [DateTime]::Now -lt $endTime) { Wait-BootLoaderReady -Server $env:COMPUTERNAME -TimeOut (New-TimeSpan -Seconds 15) -PollingFrequency (New-TimeSpan -Seconds 1) | Out-Null $queues = Get-Queue -Server $env:COMPUTERNAME -ErrorAction SilentlyContinue } } [System.Collections.Hashtable] $returnValue = @{ ServerComponentState = $serverComponentState ClusterNode = $clusterNode Queues = $queues DBCopyStatus = $dbCopyStatus UMActiveCalls = $umCalls MailboxServer = $mailboxServer } return $returnValue } # Gets a count of messages in queues on the local server function Get-QueueMessageCount { [CmdletBinding()] [OutputType([System.UInt32])] param ( [Parameter(Mandatory = $true)] [System.Collections.Hashtable] $MaintenanceModeStatus ) [UInt32] $messageCount = 0 if ($null -ne $MaintenanceModeStatus.Queues) { foreach ($queue in $MaintenanceModeStatus.Queues | Where-Object -FilterScript { $_.Identity -notlike "*\Shadow\*" }) { Write-Verbose -Message "Found queue '$($queue.Identity)' with a message count of '$($queue.MessageCount)'." $messageCount += $queue.MessageCount } } else { Write-Warning "No Transport Queues were detected on this server. This can occur if the MSExchangeTransport service is not started, or if Get-Queue was run too quickly after restarting the service." } return [System.UInt32] $messageCount } # Gets a count of database that are replication enabled, and are still activated on the local server (even if they are dismounted) function Get-ActiveDBCount { [CmdletBinding()] [OutputType([System.UInt32])] param ( [Parameter(Mandatory = $true)] [System.Collections.Hashtable] $MaintenanceModeStatus, [Parameter()] [System.String] $DomainController ) [UInt32] $activeDBCount = 0 # Get DB's with a status of Mounted, Mounting, Dismounted, or Dismounting $localDBs = $MaintenanceModeStatus.DBCopyStatus | Where-Object -FilterScript { $_.Status -like "Mount*" -or $_.Status -like "Dismount*" } # Ensure that any DB's we found actually have copies foreach ($db in $localDBs) { $dbProps = Get-MailboxDatabaseInternal -Identity "$($db.DatabaseName)" -DomainController $DomainController if ($dbProps.ReplicationType -ne "None") { Write-Verbose -Message "Found database '$($db.DatabaseName)' with a replication type of '$($dbProps.ReplicationType)' and a status of '$($db.Status)'." $activeDBCount++ } } return [System.UInt32] $activeDBCount } # Gets a count of active UM calls on the local server function Get-UMCallCount { [CmdletBinding()] [OutputType([System.UInt32])] param ( [Parameter(Mandatory = $true)] [System.Collections.Hashtable] $MaintenanceModeStatus, [Parameter()] [System.String] $DomainController ) [Uint32] $umCallCount = 0 $umCalls = Get-UMActiveCallsInternal -Server $env:COMPUTERNAME -DomainController $DomainController if ($null -ne $umCalls) { if ($null -eq $umCalls.Count) { $umCallCount = 1 } else { $umCallCount = $umCalls.Count } } return [System.UInt32] $umCallCount } # Gets a list of servers in the DAG with HubTransport not set to Active, or DatabaseCopyAutoActivationPolicy set to Blocked function Get-ExclusionsForMessageRedirection { [CmdletBinding()] [OutputType([System.String[]])] param ( [Parameter()] [System.String] $DomainController ) [System.String[]] $exclusions = @() $mbxServer = Get-MailboxServerInternal -Identity $env:COMPUTERNAME -DomainController $DomainController if ($null -ne $mbxServer) { $dag = Get-DatabaseAvailabilityGroupInternal -Identity $($mbxServer.DatabaseAvailabilityGroup) -DomainController $DomainController if ($null -ne $dag) { foreach ($server in $dag.Servers) { if ($server.Name -notlike $env:COMPUTERNAME) { $serverName = $server.Name.ToLower() # Check whether HubTransport is active on the specified server $htState = $null $htState = Get-ServerComponentStateInternal -Identity $server.Name -Component "HubTransport" -DomainController $DomainController if ($null -ne $htState -and $htState.State -notlike "Active") { if (($exclusions.Contains($serverName) -eq $false)) { $exclusions += $serverName continue } } # Check whether the server is already blocked from database activation $currentMbxServer = $null $currentMbxServer = Get-MailboxServerInternal -Identity $server.Name -DomainController $DomainController if ($null -ne $currentMbxServer -and $currentMbxServer.DatabaseCopyAutoActivationPolicy -like "Blocked") { if (($exclusions.Contains($serverName) -eq $false)) { $exclusions += $serverName continue } } } } } } return [System.String[]] $exclusions } # If UpgradedServerVersion was specified, checks to see whether the server is already at the desired version function Test-ExchangeAtDesiredVersion { [CmdletBinding()] [OutputType([System.Boolean])] param ( [Parameter()] [System.String] $DomainController, [Parameter()] [System.String] $UpgradedServerVersion ) $atDesiredVersion = $false if (!([System.String]::IsNullOrEmpty($UpgradedServerVersion))) { Remove-FromPSBoundParametersUsingHashtable -PSBoundParametersIn $PSBoundParameters -ParamsToKeep 'DomainController' $server = Get-ExchangeServerInternal -Identity $env:COMPUTERNAME -DomainController $DomainController if ($null -ne $server) { [System.String[]] $versionParts = $UpgradedServerVersion.Split('.') if ($null -ne $versionParts -and $versionParts.Length -eq 4) { if (([int]::Parse($server.AdminDisplayVersion.Major) -ge [int]::Parse($versionParts[0])) -and ([int]::Parse($server.AdminDisplayVersion.Minor) -ge [int]::Parse($versionParts[1])) -and ([int]::Parse($server.AdminDisplayVersion.Build) -ge [int]::Parse($versionParts[2])) -and ([int]::Parse($server.AdminDisplayVersion.Revision) -ge [int]::Parse($versionParts[3]))) { $atDesiredVersion = $true } else { Write-Verbose -Message "Desired server version '$UpgradedServerVersion' is greater than the actual server version '$($server.AdminDisplayVersion)'" } } else { throw "Invalid version format for `$UpgradedServerVersion. Should be in the format ##.#.####.#" } } } return $atDesiredVersion } # Checks to see whether the specified component is one that is already checked by default function Test-ComponentCheckedByDefault { [CmdletBinding()] [OutputType([System.Boolean])] param ( [Parameter(Mandatory = $true)] [System.String] $ComponentName ) [System.Boolean] $checkedByDefault = $false if ($ComponentName -like "ServerWideOffline" -or $ComponentName -like "UMCallRouter" -or $ComponentName -like "HubTransport" -or $ComponentName -like "Monitoring" -or $ComponentName -like "RecoveryActionsEnabled") { $checkedByDefault = $true } return $checkedByDefault } # Gets a count of members in this servers DAG function Get-DAGMemberCount { [CmdletBinding()] [OutputType([System.Int32])] param ( [Parameter()] [System.String] $DomainController ) [System.Int32] $count = 0 $server = Get-MailboxServerInternal -Identity $env:COMPUTERNAME -DomainController $DomainController if ($null -ne $server -and ![System.String]::IsNullOrEmpty($server.DatabaseAvailabilityGroup)) { $dag = Get-DatabaseAvailabilityGroupInternal -Identity "$($server.DatabaseAvailabilityGroup)" -DomainController $DomainController if ($null -ne $dag) { $count = $dag.Servers.Count } } return $count } function Test-ServerIsPAM { [CmdletBinding()] [OutputType([System.Boolean])] param ( [Parameter()] [System.String] $DomainController ) $isPAM = $false $server = Get-MailboxServerInternal -Identity $env:COMPUTERNAME -DomainController $DomainController if ($null -ne $server -and ![System.String]::IsNullOrEmpty($server.DatabaseAvailabilityGroup)) { $dag = Get-DatabaseAvailabilityGroupInternal -Identity "$($server.DatabaseAvailabilityGroup)" -DomainController $DomainController if ($null -ne $dag -and $dag.PrimaryActiveManager -like $env:COMPUTERNAME) { $isPAM = $true } } return $isPAM } # Waits up the the specified WaitMinutes for existing UM calls to finish. Returns True if no more UM calls are active. function Wait-ForUMToDrain { [CmdletBinding()] [OutputType([System.Boolean])] param ( [Parameter()] [System.String] $DomainController, [Parameter()] [System.UInt32] $SleepSeconds = 15, [Parameter()] [System.UInt32] $WaitMinutes = 5 ) [System.Boolean] $umDrained = $false $endTime = [DateTime]::Now.AddMinutes($WaitMinutes) Write-Verbose -Message "Waiting up to $WaitMinutes minutes for active UM calls to finish" while ($fullyInMaintenanceMode -eq $false -and [DateTime]::Now -lt $endTime) { Write-Verbose -Message "Checking whether all UM calls are finished at $([DateTime]::Now)." $umCalls = $null Get-UMActiveCallsInternal -Server $env:COMPUTERNAME -DomainController $DomainController if ($null -eq $umCalls -or $umCalls.Count -eq 0) { $umDrained = $true } else { Write-Verbose -Message "There are still active UM calls as of $([DateTime]::Now). Sleeping for $SleepSeconds seconds. Will continue checking until $endTime." Start-Sleep -Seconds $SleepSeconds } } return $umDrained } <# Checks whether a Component is at the specified State, if not, changes the component to the state. Returns whether a change was made to the component state #> function Update-ComponentState { [CmdletBinding()] [OutputType([System.Boolean])] param ( [Parameter(Mandatory = $true)] [System.String] $Component, [Parameter(Mandatory = $true)] [System.String] $Requester, [Parameter(Mandatory = $true)] $ServerComponentState, [Parameter(Mandatory = $true)] [System.String] $State, [Parameter()] [System.String] $DomainController, [Parameter()] [System.Boolean] $SetInactiveComponentsFromAnyRequesterToActive = $false ) [System.Boolean] $madeChange = $false $componentState = $MaintenanceModeStatus.ServerComponentState | Where-Object -FilterScript { $_.Component -like "$($Component)" } if ($null -ne $componentState) { # If we're already Inactive don't bother setting to Draining. if ($State -like "Draining" -and $componentState.State -like "Inactive") { return $false } elseif ($componentState.State -notlike "$($State)") { Write-Verbose -Message "Setting $($componentState.Component) component to $State for requester $Requester" Set-ServerComponentStateInternal -Component $componentState.Component -State $State -Requester $Requester -DomainController $DomainController $madeChange = $true if ($State -eq "Active" -and $SetInactiveComponentsFromAnyRequesterToActive -eq $true) { $additionalRequesters = $null $additionalRequesters = $componentState.LocalStates | Where-Object -FilterScript { $_.Requester -notlike "$($Requester)" -and $_.State -notlike "Active" } if ($null -ne $additionalRequesters) { foreach ($additionalRequester in $additionalRequesters) { Write-Verbose -Message "Setting $($componentState.Component) component to Active for requester $($additionalRequester.Requester)" Set-ServerComponentStateInternal -Component $componentState.Component -State Active -Requester $additionalRequester.Requester -DomainController $DomainController } } } } } return $madeChange } # Finds all databases which have an Activation Preference of 1 for this server, which are not currently hosted on this server, and moves them back function Move-PrimaryDatabasesBack { [CmdletBinding()] param ( [Parameter()] [System.String] $DomainController, [Parameter()] [ValidateSet('None', 'Lossless', 'GoodAvailability', 'BestAvailability', 'BestEffort')] [System.String] $MountDialOverride, [Parameter()] [System.Boolean] $SkipActiveCopyChecks, [Parameter()] [System.Boolean] $SkipAllChecks, [Parameter()] [System.Boolean] $SkipClientExperienceChecks, [Parameter()] [System.Boolean] $SkipCpuChecks, [Parameter()] [System.Boolean] $SkipHealthChecks, [Parameter()] [System.Boolean] $SkipLagChecks, [Parameter()] [System.Boolean] $SkipMaximumActiveDatabasesChecks, [Parameter()] [System.Boolean] $SkipMoveSuppressionChecks ) $databases = Get-MailboxDatabaseInternal -Server $env:COMPUTERNAME -Status -DomainController $DomainController [System.String[]] $databasesWithActivationPrefOneNotOnThisServer = @() if ($null -ne $databases) { foreach ($database in $databases) { if ($null -ne $database.ActivationPreference) { foreach ($ap in $database.ActivationPreference) { if ($ap.Key.Name -like $env:COMPUTERNAME -and $ap.Value -eq 1) { $copyStatus = $null $copyStatus = Get-MailboxDatabaseCopyStatusInternal -Identity "$($database.Name)\$($env:COMPUTERNAME)" -DomainController $DomainController if ($null -ne $copyStatus -and $copyStatus.Status -eq "Healthy") { $databasesWithActivationPrefOneNotOnThisServer += $database.Name } } } } } } if ($databasesWithActivationPrefOneNotOnThisServer.Count -gt 0) { Write-Verbose -Message "Found $($databasesWithActivationPrefOneNotOnThisServer.Count) Healthy databases with Activation Preference 1 that should be moved to this server." foreach ($database in $databasesWithActivationPrefOneNotOnThisServer) { Write-Verbose -Message "Attempting to move database '$database' back to this server." # Do the move in a try/catch block so we can log the error, but not have it prevent other databases from attempting to move try { Move-ActiveMailboxDatabaseInternal -Identity $database -ActivateOnServer $env:COMPUTERNAME -DomainController $DomainController -MountDialOverride $MountDialOverride -SkipActiveCopyChecks $SkipActiveCopyChecks -SkipAllChecks $SkipAllChecks -SkipClientExperienceChecks $SkipClientExperienceChecks -SkipCpuChecks $SkipCpuChecks -SkipHealthChecks $SkipHealthChecks -SkipLagChecks $SkipLagChecks -SkipMaximumActiveDatabasesChecks $SkipMaximumActiveDatabasesChecks -SkipMoveSuppressionChecks $SkipMoveSuppressionChecks } catch { Write-Error "$($_.Exception.Message)" } } } else { Write-Verbose -Message 'Found 0 Healthy databases with Activation Preference 1 for this server that are currently not hosted on this server' } } #region Exchange Cmdlet Wrappers function Get-ExchangeServerInternal { [CmdletBinding()] param ( [Parameter(Mandatory = $true)] [System.String] $Identity, [Parameter()] [System.String] $DomainController ) if ([System.String]::IsNullOrEmpty($DomainController)) { Remove-FromPSBoundParametersUsingHashtable -PSBoundParametersIn $PSBoundParameters -ParamsToRemove 'DomainController' } return (Get-ExchangeServer @PSBoundParameters) } function Get-DatabaseAvailabilityGroupInternal { [CmdletBinding()] param ( [Parameter(Mandatory = $true)] [System.String] $Identity, [Parameter()] [System.String] $DomainController ) if ([System.String]::IsNullOrEmpty($DomainController)) { Remove-FromPSBoundParametersUsingHashtable -PSBoundParametersIn $PSBoundParameters -ParamsToRemove 'DomainController' } return (Get-DatabaseAvailabilityGroup @PSBoundParameters -Status) } function Get-ServerComponentStateInternal { [CmdletBinding()] param ( [Parameter(Mandatory = $true)] [System.String] $Identity, [Parameter()] [System.String] $Component, [Parameter()] [System.String] $DomainController ) if ([System.String]::IsNullOrEmpty($Component)) { Remove-FromPSBoundParametersUsingHashtable -PSBoundParametersIn $PSBoundParameters -ParamsToRemove 'Component' } if ([System.String]::IsNullOrEmpty($DomainController)) { Remove-FromPSBoundParametersUsingHashtable -PSBoundParametersIn $PSBoundParameters -ParamsToRemove 'DomainController' } return (Get-ServerComponentState @PSBoundParameters) } function Set-ServerComponentStateInternal { [CmdletBinding()] param ( [Parameter(Mandatory = $true)] [System.String] $Component, [Parameter(Mandatory = $true)] [System.String] $Requester, [Parameter(Mandatory = $true)] [System.String] $State, [Parameter()] [System.String] $DomainController ) if ([System.String]::IsNullOrEmpty($DomainController)) { Remove-FromPSBoundParametersUsingHashtable -PSBoundParametersIn $PSBoundParameters -ParamsToRemove 'DomainController' } Set-ServerComponentState -Identity $env:COMPUTERNAME @PSBoundParameters } function Get-MailboxDatabaseInternal { [CmdletBinding()] param ( [Parameter()] [System.String] $Identity, [Parameter()] [System.String] $DomainController, [Parameter()] [System.String] $Server, [Parameter()] [switch] $Status ) if ([System.String]::IsNullOrEmpty($Identity)) { Remove-FromPSBoundParametersUsingHashtable -PSBoundParametersIn $PSBoundParameters -ParamsToRemove 'Identity' } if ([System.String]::IsNullOrEmpty($DomainController)) { Remove-FromPSBoundParametersUsingHashtable -PSBoundParametersIn $PSBoundParameters -ParamsToRemove 'DomainController' } if ([System.String]::IsNullOrEmpty($Server)) { Remove-FromPSBoundParametersUsingHashtable -PSBoundParametersIn $PSBoundParameters -ParamsToRemove 'Server' } return (Get-MailboxDatabase @PSBoundParameters) } function Get-MailboxDatabaseCopyStatusInternal { [CmdletBinding()] param ( [Parameter()] [System.String] $Identity, [Parameter()] [System.String] $DomainController, [Parameter()] [System.String] $Server ) if ([System.String]::IsNullOrEmpty($Identity)) { Remove-FromPSBoundParametersUsingHashtable -PSBoundParametersIn $PSBoundParameters -ParamsToRemove 'Identity' } if ([System.String]::IsNullOrEmpty($DomainController)) { Remove-FromPSBoundParametersUsingHashtable -PSBoundParametersIn $PSBoundParameters -ParamsToRemove 'DomainController' } if ([System.String]::IsNullOrEmpty($Server)) { Remove-FromPSBoundParametersUsingHashtable -PSBoundParametersIn $PSBoundParameters -ParamsToRemove 'Server' } return (Get-MailboxDatabaseCopyStatus @PSBoundParameters) } function Get-MailboxServerInternal { [CmdletBinding()] param ( [Parameter(Mandatory = $true)] [System.String] $Identity, [Parameter()] [System.String] $DomainController ) if ([System.String]::IsNullOrEmpty($DomainController)) { Remove-FromPSBoundParametersUsingHashtable -PSBoundParametersIn $PSBoundParameters -ParamsToRemove 'DomainController' } return (Get-MailboxServer @PSBoundParameters) } function Set-MailboxServerInternal { [CmdletBinding()] param ( [Parameter(Mandatory = $true)] [System.String] $Identity, [Parameter()] [System.String] $DomainController, [Parameter()] [System.Collections.Hashtable] $AdditionalParams ) if ([System.String]::IsNullOrEmpty($DomainController)) { Remove-FromPSBoundParametersUsingHashtable -PSBoundParametersIn $PSBoundParameters -ParamsToRemove 'DomainController' } Add-ToPSBoundParametersFromHashtable -PSBoundParametersIn $PSBoundParameters -ParamsToAdd $AdditionalParams Remove-FromPSBoundParametersUsingHashtable -PSBoundParametersIn $PSBoundParameters -ParamsToRemove 'AdditionalParams' Set-MailboxServer @PSBoundParameters } function Get-UMActiveCallsInternal { [CmdletBinding()] param ( [Parameter(Mandatory = $true)] [System.String] $Server, [Parameter()] [System.String] $DomainController ) $umActiveCalls = $null $serverVersion = Get-ExchangeVersionYear if ($serverVersion -in '2013', '2016') { if ([System.String]::IsNullOrEmpty($DomainController)) { Remove-FromPSBoundParametersUsingHashtable -PSBoundParametersIn $PSBoundParameters -ParamsToRemove 'DomainController' } $umActiveCalls = Get-UMActiveCalls @PSBoundParameters } return $umActiveCalls } function Move-ActiveMailboxDatabaseInternal { [CmdletBinding()] param ( [Parameter()] [System.String] $ActivateOnServer, [Parameter()] [System.String] $Identity, [Parameter()] [System.String] $DomainController, [Parameter()] [ValidateSet('None', 'Lossless', 'GoodAvailability', 'BestAvailability', 'BestEffort')] [System.String] $MountDialOverride, [Parameter()] [System.String] $MoveComment, [Parameter()] [System.String] $Server = $env:COMPUTERNAME, [Parameter()] [System.Boolean] $SkipActiveCopyChecks, [Parameter()] [System.Boolean] $SkipAllChecks, [Parameter()] [System.Boolean] $SkipClientExperienceChecks, [Parameter()] [System.Boolean] $SkipCpuChecks, [Parameter()] [System.Boolean] $SkipHealthChecks, [Parameter()] [System.Boolean] $SkipLagChecks, [Parameter()] [System.Boolean] $SkipMaximumActiveDatabasesChecks, [Parameter()] [System.Boolean] $SkipMoveSuppressionChecks ) if ([System.String]::IsNullOrEmpty($ActivateOnServer)) { Remove-FromPSBoundParametersUsingHashtable -PSBoundParametersIn $PSBoundParameters -ParamsToRemove 'ActivateOnServer' } if ([System.String]::IsNullOrEmpty($DomainController)) { Remove-FromPSBoundParametersUsingHashtable -PSBoundParametersIn $PSBoundParameters -ParamsToRemove 'DomainController' } if ([System.String]::IsNullOrEmpty($Identity)) { Remove-FromPSBoundParametersUsingHashtable -PSBoundParametersIn $PSBoundParameters -ParamsToRemove 'Identity' } if ([System.String]::IsNullOrEmpty($MoveComment)) { Remove-FromPSBoundParametersUsingHashtable -PSBoundParametersIn $PSBoundParameters -ParamsToRemove 'MoveComment' } if ([System.String]::IsNullOrEmpty($Server)) { Remove-FromPSBoundParametersUsingHashtable -PSBoundParametersIn $PSBoundParameters -ParamsToRemove 'Server' } # Setup parameters in a format Move-ActiveMailboxDatabase expects $moveDBParams = @{ Confirm = $false Erroraction = 'Stop' } if ($SkipActiveCopyChecks) { $moveDBParams.Add("SkipActiveCopyChecks", $true) } if ($SkipClientExperienceChecks) { $moveDBParams.Add("SkipClientExperienceChecks", $true) } if ($SkipHealthChecks) { $moveDBParams.Add("SkipHealthChecks", $true) } if ($SkipLagChecks) { $moveDBParams.Add("SkipLagChecks", $true) } if ($SkipMaximumActiveDatabasesChecks) { $moveDBParams.Add("SkipMaximumActiveDatabasesChecks", $true) } if ((Get-ExchangeVersionYear) -in '2016', '2019') { if ($SkipAllChecks) { $moveDBParams.Add("SkipAllChecks", $true) } if ($SkipCpuChecks) { $moveDBParams.Add("SkipCpuChecks", $true) } if ($SkipMoveSuppressionChecks) { $moveDBParams.Add("SkipMoveSuppressionChecks", $true) } } # Remove the PSBoundParameters we just re-formatted Remove-FromPSBoundParametersUsingHashtable -PSBoundParametersIn $PSBoundParameters -ParamsToRemove 'SkipActiveCopyChecks', 'SkipClientExperienceChecks', 'SkipLagChecks', 'SkipMaximumActiveDatabasesChecks', 'SkipMoveSuppressionChecks', 'SkipHealthChecks', 'SkipCpuChecks', 'SkipAllChecks' # Execute mailbox DB move Move-ActiveMailboxDatabase @PSBoundParameters @moveDBParams } #endregion Export-ModuleMember -Function *-TargetResource |