certificates.psm1
|
<#
.SYNOPSIS Upload trusted certificate to Safeguard via the Web API. .DESCRIPTION Upload a certificate to serve as a new trusted root certificate for Safeguard. You use this same method to upload an intermediate certificate that is part of the chain of trust. .PARAMETER Appliance IP address or hostname of a Safeguard appliance. .PARAMETER AccessToken A string containing the bearer token to be used with Safeguard Web API. .PARAMETER Insecure Ignore verification of Safeguard appliance SSL certificate. .PARAMETER CertificateFile A string containing the path to a certificate in DER or Base64 format. .INPUTS None. .OUTPUTS JSON response from Safeguard Web API. .EXAMPLE Install-SafeguardTrustedCertificate -AccessToken $token -Appliance 10.5.32.54 .EXAMPLE Install-SafeguardTrustedCertificate "\\someserver.corp\share\Cert Root CA.cer" #> function Install-SafeguardTrustedCertificate { [CmdletBinding()] Param( [Parameter(Mandatory=$false)] [string]$Appliance, [Parameter(Mandatory=$false)] [object]$AccessToken, [Parameter(Mandatory=$false)] [switch]$Insecure, [Parameter(Mandatory=$true,Position=0)] [string]$CertificateFile ) if (-not $PSBoundParameters.ContainsKey("ErrorAction")) { $ErrorActionPreference = "Stop" } if (-not $PSBoundParameters.ContainsKey("Verbose")) { $VerbosePreference = $PSCmdlet.GetVariableValue("VerbosePreference") } Import-Module -Name "$PSScriptRoot\ps-utilities.psm1" -Scope Local $local:CertificateContents = (Get-CertificateFileContents $CertificateFile) if (-not $CertificateContents) { throw "No valid certificate to upload" } Write-Host "Uploading Certificate..." Invoke-SafeguardMethod -AccessToken $AccessToken -Appliance $Appliance -Insecure:$Insecure Core ` POST TrustedCertificates -Body @{ Base64CertificateData = "$($local:CertificateContents)" } } <# .SYNOPSIS Remove trusted certificate from Safeguard via the Web API. .DESCRIPTION Remove a trusted certificate that was previously added to Safeguard via the Web API. .PARAMETER Appliance IP address or hostname of a Safeguard appliance. .PARAMETER AccessToken A string containing the bearer token to be used with Safeguard Web API. .PARAMETER Insecure Ignore verification of Safeguard appliance SSL certificate. .PARAMETER Thumbprint A string containing the thumbprint of the certificate. .INPUTS None. .OUTPUTS JSON response from Safeguard Web API. .EXAMPLE Uninstall-SafeguardTrustedCertificate -AccessToken $token -Appliance 10.5.32.54 .EXAMPLE Uninstall-SafeguardTrustedCertificate -Thumbprint 3E1A99AE7ACFB163DEE3CCAC00A437D675937FCA #> function Uninstall-SafeguardTrustedCertificate { [CmdletBinding()] Param( [Parameter(Mandatory=$false)] [string]$Appliance, [Parameter(Mandatory=$false)] [object]$AccessToken, [Parameter(Mandatory=$false)] [switch]$Insecure, [Parameter(Mandatory=$false,Position=0)] [string]$Thumbprint ) if (-not $PSBoundParameters.ContainsKey("ErrorAction")) { $ErrorActionPreference = "Stop" } if (-not $PSBoundParameters.ContainsKey("Verbose")) { $VerbosePreference = $PSCmdlet.GetVariableValue("VerbosePreference") } if (-not $Thumbprint) { $local:CurrentThumbprints = (Get-SafeguardTrustedCertificate -AccessToken $AccessToken -Appliance $Appliance -Insecure:$Insecure).Thumbprint -join ", " Write-Host "Currently Installed Trusted Certificates: [ $($local:CurrentThumbprints) ]" $Thumbprint = (Read-Host "Thumbprint") } Invoke-SafeguardMethod -AccessToken $AccessToken -Appliance $Appliance -Insecure:$Insecure Core DELETE "TrustedCertificates/$Thumbprint" } <# .SYNOPSIS Get trusted certificates from Safeguard via the Web API. .DESCRIPTION Retrieve trusted certificates that were previously added to Safeguard via the Web API. These will be only the user-added trusted certificates. .PARAMETER Appliance IP address or hostname of a Safeguard appliance. .PARAMETER AccessToken A string containing the bearer token to be used with Safeguard Web API. .PARAMETER Insecure Ignore verification of Safeguard appliance SSL certificate. .PARAMETER Thumbprint A string containing the thumbprint of the certificate. .PARAMETER Fields An array of the certificate property names to return. .INPUTS None. .OUTPUTS JSON response from Safeguard Web API. .EXAMPLE Get-SafeguardTrustedCertificate -AccessToken $token -Appliance 10.5.32.54 .EXAMPLE Get-SafeguardTrustedCertificate #> function Get-SafeguardTrustedCertificate { [CmdletBinding()] Param( [Parameter(Mandatory=$false)] [string]$Appliance, [Parameter(Mandatory=$false)] [object]$AccessToken, [Parameter(Mandatory=$false)] [switch]$Insecure, [Parameter(Mandatory=$false,Position=0)] [string]$Thumbprint, [Parameter(Mandatory=$false)] [string[]]$Fields ) if (-not $PSBoundParameters.ContainsKey("ErrorAction")) { $ErrorActionPreference = "Stop" } if (-not $PSBoundParameters.ContainsKey("Verbose")) { $VerbosePreference = $PSCmdlet.GetVariableValue("VerbosePreference") } $local:Parameters = $null if ($Fields) { $local:Parameters = @{ fields = ($Fields -join ",")} } if ($PSBoundParameters.ContainsKey("Thumbprint")) { Invoke-SafeguardMethod -AccessToken $AccessToken -Appliance $Appliance -Insecure:$Insecure Core ` GET "TrustedCertificates/$Thumbprint" -Parameters $local:Parameters } else { Invoke-SafeguardMethod -AccessToken $AccessToken -Appliance $Appliance -Insecure:$Insecure Core ` GET TrustedCertificates -Parameters $local:Parameters } } <# .SYNOPSIS Get the audit log signing certificate from Safeguard via the Web API. .DESCRIPTION Retrieve the certificate used for signing the audit log via the Web API. This certificate is used to sign the audit log when it is exported for long-term retention. .PARAMETER Appliance IP address or hostname of a Safeguard appliance. .PARAMETER AccessToken A string containing the bearer token to be used with Safeguard Web API. .PARAMETER Insecure Ignore verification of Safeguard appliance SSL certificate. .PARAMETER Fields An array of the certificate property names to return. .INPUTS None. .OUTPUTS JSON response from Safeguard Web API. .EXAMPLE Get-SafeguardAuditLogSigningCertificate -AccessToken $token -Appliance 10.5.32.54 .EXAMPLE Get-SafeguardAuditLogSigningCertificate #> function Get-SafeguardAuditLogSigningCertificate { [CmdletBinding()] Param( [Parameter(Mandatory=$false)] [string]$Appliance, [Parameter(Mandatory=$false)] [object]$AccessToken, [Parameter(Mandatory=$false)] [switch]$Insecure, [Parameter(Mandatory=$false)] [string[]]$Fields ) if (-not $PSBoundParameters.ContainsKey("ErrorAction")) { $ErrorActionPreference = "Stop" } if (-not $PSBoundParameters.ContainsKey("Verbose")) { $VerbosePreference = $PSCmdlet.GetVariableValue("VerbosePreference") } $local:Parameters = $null if ($Fields) { $local:Parameters = @{ fields = ($Fields -join ",")} } Invoke-SafeguardMethod -AccessToken $AccessToken -Appliance $Appliance -Insecure:$Insecure Core ` GET "AuditLog/Retention/SigningCertificate" -Parameters $local:Parameters } <# .SYNOPSIS Upload audit log signing certificate to Safeguard via the Web API. .DESCRIPTION Upload a certificate for signing the audit log when exported for long-term retention. .PARAMETER Appliance IP address or hostname of a Safeguard appliance. .PARAMETER AccessToken A string containing the bearer token to be used with Safeguard Web API. .PARAMETER Insecure Ignore verification of Safeguard appliance SSL certificate. .PARAMETER CertificateFile A string containing the path to a certificate PFX or P12 file. .PARAMETER Password A secure string to be used as a passphrase for the certificate PFX or P12 file. .INPUTS None. .OUTPUTS JSON response from Safeguard Web API. .EXAMPLE Install-SafeguardAuditLogSigningCertificate -AccessToken $token -Appliance 10.5.32.54 .EXAMPLE Install-SafeguardAuditLogSigningCertificate -CertificateFile C:\cert.pfx .EXAMPLE Install-SafeguardAuditLogSigningCertificate -CertificateFile C:\cert.pfx -Password (ConvertTo-SecureString -AsPlainText "TestPassword" -Force) #> function Install-SafeguardAuditLogSigningCertificate { [CmdletBinding()] Param( [Parameter(Mandatory=$false)] [string]$Appliance, [Parameter(Mandatory=$false)] [object]$AccessToken, [Parameter(Mandatory=$false)] [switch]$Insecure, [Parameter(Mandatory=$true,Position=0)] [string]$CertificateFile, [Parameter(Mandatory=$false,Position=1)] [SecureString]$Password ) if (-not $PSBoundParameters.ContainsKey("ErrorAction")) { $ErrorActionPreference = "Stop" } if (-not $PSBoundParameters.ContainsKey("Verbose")) { $VerbosePreference = $PSCmdlet.GetVariableValue("VerbosePreference") } Import-Module -Name "$PSScriptRoot\ps-utilities.psm1" -Scope Local $local:CertificateContents = (Get-CertificateFileContents $CertificateFile) if (-not $CertificateContents) { throw "No valid certificate to upload" } if (-not $Password) { Write-Host "For no password just press enter..." $Password = (Read-host "Password" -AsSecureString) } $local:PasswordPlainText = [System.Net.NetworkCredential]::new("", $Password).Password Write-Host "Uploading Certificate..." if ($local:PasswordPlainText) { $local:NewCertificate = (Invoke-SafeguardMethod -AccessToken $AccessToken -Appliance $Appliance -Insecure:$Insecure Core ` PUT "AuditLog/Retention/SigningCertificate" -Body @{ Base64CertificateData = "$($local:CertificateContents)"; Passphrase = "$($local:PasswordPlainText)" }) } else { $local:NewCertificate = (Invoke-SafeguardMethod -AccessToken $AccessToken -Appliance $Appliance -Insecure:$Insecure Core ` PUT "AuditLog/Retention/SigningCertificate" -Body @{ Base64CertificateData = "$($local:CertificateContents)" }) } $local:NewCertificate } <# .SYNOPSIS Remove audit log signing certificate from Safeguard via the Web API. .DESCRIPTION Remove the certificate for signing the audit log when exported for long-term retention. It will be replaced by the default. .PARAMETER Appliance IP address or hostname of a Safeguard appliance. .PARAMETER AccessToken A string containing the bearer token to be used with Safeguard Web API. .PARAMETER Insecure Ignore verification of Safeguard appliance SSL certificate. .INPUTS None. .OUTPUTS JSON response from Safeguard Web API. .EXAMPLE Uninstall-SafeguardAuditLogSigningCertificate -AccessToken $token -Appliance 10.5.32.54 .EXAMPLE Uninstall-SafeguardAuditLogSigningCertificate #> function Uninstall-SafeguardAuditLogSigningCertificate { [CmdletBinding()] Param( [Parameter(Mandatory=$false)] [string]$Appliance, [Parameter(Mandatory=$false)] [object]$AccessToken, [Parameter(Mandatory=$false)] [switch]$Insecure ) if (-not $PSBoundParameters.ContainsKey("ErrorAction")) { $ErrorActionPreference = "Stop" } if (-not $PSBoundParameters.ContainsKey("Verbose")) { $VerbosePreference = $PSCmdlet.GetVariableValue("VerbosePreference") } Invoke-SafeguardMethod -AccessToken $AccessToken -Appliance $Appliance -Insecure:$Insecure Core DELETE "AuditLog/Retention/SigningCertificate" } <# .SYNOPSIS Upload SSL certificate to Safeguard appliance via the Web API. .DESCRIPTION Upload a certificate for use with SSL server authentication. A separate action is required to assign an SSL certificate to a particular appliance if you do not use the -Assign parameter. A certificate can be assigned using the Set-SafeguardSslCertificateForAppliance cmdlet. .PARAMETER Appliance IP address or hostname of a Safeguard appliance. .PARAMETER AccessToken A string containing the bearer token to be used with Safeguard Web API. .PARAMETER Insecure Ignore verification of Safeguard appliance SSL certificate. .PARAMETER CertificateFile A string containing the path to a certificate PFX or P12 file. .PARAMETER Password A secure string to be used as a passphrase for the certificate PFX or P12 file. .PARAMETER Assign Install the certificate to this server immediately. .INPUTS None. .OUTPUTS JSON response from Safeguard Web API. .EXAMPLE Install-SafeguardSslCertificate -AccessToken $token -Appliance 10.5.32.54 .EXAMPLE Install-SafeguardSslCertificate -CertificateFile C:\cert.pfx #> function Install-SafeguardSslCertificate { [CmdletBinding()] Param( [Parameter(Mandatory=$false)] [string]$Appliance, [Parameter(Mandatory=$false)] [object]$AccessToken, [Parameter(Mandatory=$false)] [switch]$Insecure, [Parameter(Mandatory=$true,Position=0)] [string]$CertificateFile, [Parameter(Mandatory=$false,Position=1)] [SecureString]$Password, [Parameter(Mandatory=$false)] [switch]$Assign ) if (-not $PSBoundParameters.ContainsKey("ErrorAction")) { $ErrorActionPreference = "Stop" } if (-not $PSBoundParameters.ContainsKey("Verbose")) { $VerbosePreference = $PSCmdlet.GetVariableValue("VerbosePreference") } Import-Module -Name "$PSScriptRoot\ps-utilities.psm1" -Scope Local $local:CertificateContents = (Get-CertificateFileContents $CertificateFile) if (-not $CertificateContents) { throw "No valid certificate to upload" } if (-not $Password) { Write-Host "For no password just press enter..." $Password = (Read-host "Password" -AsSecureString) } $local:PasswordPlainText = [System.Net.NetworkCredential]::new("", $Password).Password Write-Host "Uploading Certificate..." if ($local:PasswordPlainText) { $local:NewCertificate = (Invoke-SafeguardMethod -AccessToken $AccessToken -Appliance $Appliance -Insecure:$Insecure Core ` POST SslCertificates -Body @{ Base64CertificateData = "$($local:CertificateContents)"; Passphrase = "$($local:PasswordPlainText)" }) } else { $local:NewCertificate = (Invoke-SafeguardMethod -AccessToken $AccessToken -Appliance $Appliance -Insecure:$Insecure Core ` POST SslCertificates -Body @{ Base64CertificateData = "$($local:CertificateContents)" }) } $local:NewCertificate if ($Assign -and $local:NewCertificate.Thumbprint) { Set-SafeguardSslCertificateForAppliance -AccessToken $AccessToken -Appliance $Appliance -Insecure:$Insecure $local:NewCertificate.Thumbprint } } <# .SYNOPSIS Remove SSL certificate from Safeguard via the Web API. .DESCRIPTION Remove an SSL certificate that was previously added to Safeguard via the Web API. .PARAMETER Appliance IP address or hostname of a Safeguard appliance. .PARAMETER AccessToken A string containing the bearer token to be used with Safeguard Web API. .PARAMETER Insecure Ignore verification of Safeguard appliance SSL certificate. .PARAMETER Thumbprint A string containing the thumbprint of the certificate. .INPUTS None. .OUTPUTS JSON response from Safeguard Web API. .EXAMPLE Uninstall-SafeguardSslCertificate -AccessToken $token -Appliance 10.5.32.54 .EXAMPLE Uninstall-SafeguardSslCertificate -Thumbprint 3E1A99AE7ACFB163DEE3CCAC00A437D675937FCA #> function Uninstall-SafeguardSslCertificate { [CmdletBinding()] Param( [Parameter(Mandatory=$false)] [string]$Appliance, [Parameter(Mandatory=$false)] [object]$AccessToken, [Parameter(Mandatory=$false)] [switch]$Insecure, [Parameter(Mandatory=$false,Position=0)] [string]$Thumbprint ) if (-not $PSBoundParameters.ContainsKey("ErrorAction")) { $ErrorActionPreference = "Stop" } if (-not $PSBoundParameters.ContainsKey("Verbose")) { $VerbosePreference = $PSCmdlet.GetVariableValue("VerbosePreference") } if (-not $Thumbprint) { $local:CurrentThumbprints = (Get-SafeguardSslCertificate -AccessToken $AccessToken -Appliance $Appliance -Insecure:$Insecure).Thumbprint -join ", " Write-Host "Currently Installed SSL Certificates: [ $($local:CurrentThumbprints) ]" $Thumbprint = (Read-Host "Thumbprint") } Invoke-SafeguardMethod -AccessToken $AccessToken -Appliance $Appliance -Insecure:$Insecure Core DELETE "SslCertificates/$Thumbprint" } <# .SYNOPSIS Get SSL certificates from Safeguard via the Web API. .DESCRIPTION Retrieve SSL certificates that were previously added to Safeguard via the Web API. These will also include the default SSL certificates. .PARAMETER Appliance IP address or hostname of a Safeguard appliance. .PARAMETER AccessToken A string containing the bearer token to be used with Safeguard Web API. .PARAMETER Insecure Ignore verification of Safeguard appliance SSL certificate. .PARAMETER Thumbprint A string containing the thumbprint of the certificate. .PARAMETER Fields An array of the certificate property names to return. .INPUTS None. .OUTPUTS JSON response from Safeguard Web API. .EXAMPLE Get-SafeguardSslCertificate -AccessToken $token -Appliance 10.5.32.54 .EXAMPLE Get-SafeguardSslCertificate #> function Get-SafeguardSslCertificate { [CmdletBinding()] Param( [Parameter(Mandatory=$false)] [string]$Appliance, [Parameter(Mandatory=$false)] [object]$AccessToken, [Parameter(Mandatory=$false)] [switch]$Insecure, [Parameter(Mandatory=$false,Position=0)] [string]$Thumbprint, [Parameter(Mandatory=$false)] [string[]]$Fields ) if (-not $PSBoundParameters.ContainsKey("ErrorAction")) { $ErrorActionPreference = "Stop" } if (-not $PSBoundParameters.ContainsKey("Verbose")) { $VerbosePreference = $PSCmdlet.GetVariableValue("VerbosePreference") } $local:Parameters = $null if ($Fields) { $local:Parameters = @{ fields = ($Fields -join ",")} } if ($PSBoundParameters.ContainsKey("Thumbprint")) { Invoke-SafeguardMethod -AccessToken $AccessToken -Appliance $Appliance -Insecure:$Insecure Core ` GET "SslCertificates/$Thumbprint" -Parameters $local:Parameters } else { Invoke-SafeguardMethod -AccessToken $AccessToken -Appliance $Appliance -Insecure:$Insecure Core ` GET SslCertificates -Parameters $local:Parameters } } <# .SYNOPSIS Assign an SSL certificate to a specific Safeguard appliance via the Web API. .DESCRIPTION Assign a previously added SSL certificate to a specific Safeguard appliance via the Web API. If an appliance ID is not specified this cmdlet will use the appliance that you are communicating with. .PARAMETER Appliance IP address or hostname of a Safeguard appliance. .PARAMETER AccessToken A string containing the bearer token to be used with Safeguard Web API. .PARAMETER Insecure Ignore verification of Safeguard appliance SSL certificate. .PARAMETER Thumbprint A string containing the thumbprint of the SSL certificate. .PARAMETER ApplianceId A string containing the ID of the appliance to assign the SSL certificate to. .INPUTS None. .OUTPUTS JSON response from Safeguard Web API. .EXAMPLE Set-SafeguardSslCertificateForAppliance -AccessToken $token -Appliance 10.5.32.54 .EXAMPLE Set-SafeguardSslCertificateForAppliance -Thumbprint 3E1A99AE7ACFB163DEE3CCAC00A437D675937FCA -ApplianceId 00155D26E342 #> function Set-SafeguardSslCertificateForAppliance { [CmdletBinding()] Param( [Parameter(Mandatory=$false)] [string]$Appliance, [Parameter(Mandatory=$false)] [object]$AccessToken, [Parameter(Mandatory=$false)] [switch]$Insecure, [Parameter(Mandatory=$false,Position=0)] [string]$Thumbprint, [Parameter(Mandatory=$false,Position=1)] [string]$ApplianceId ) if (-not $PSBoundParameters.ContainsKey("ErrorAction")) { $ErrorActionPreference = "Stop" } if (-not $PSBoundParameters.ContainsKey("Verbose")) { $VerbosePreference = $PSCmdlet.GetVariableValue("VerbosePreference") } if (-not $Thumbprint) { $local:CurrentThumbprints = (Get-SafeguardSslCertificate -AccessToken $AccessToken -Appliance $Appliance -Insecure:$Insecure).Thumbprint -join ", " Write-Host "Currently Installed SSL Certificates: [ $($local:CurrentThumbprints) ]" $Thumbprint = (Read-Host "Thumbprint") } if (-not $ApplianceId) { $ApplianceId = (Invoke-SafeguardMethod -Anonymous -Appliance $Appliance -Insecure:$Insecure Notification GET Status).ApplianceId } Write-Host "Setting $Thumbprint as current SSL Certificate for $ApplianceId..." $local:CurrentIds = (Invoke-SafeguardMethod -AccessToken $AccessToken -Appliance $Appliance -Insecure:$Insecure Core GET "SslCertificates/$Thumbprint/Appliances") if (-not $local:CurrentIds) { $local:CurrentIds = @() } $local:CurrentIds += @{ "Id" = "$ApplianceId" } Invoke-SafeguardMethod -AccessToken $AccessToken -Appliance $Appliance -Insecure:$Insecure Core PUT "SslCertificates/$Thumbprint/Appliances" -Body $local:CurrentIds } <# .SYNOPSIS Unassign SSL certificate from a Safeguard appliance via the Web API. .DESCRIPTION Unassign SSL certificate from a Safeguard appliance that was previously configured via the Web API. If an appliance ID is not specified to this cmdlet will use the appliance that you are communicating with. .PARAMETER Appliance IP address or hostname of a Safeguard appliance. .PARAMETER AccessToken A string containing the bearer token to be used with Safeguard Web API. .PARAMETER Insecure Ignore verification of Safeguard appliance SSL certificate. .PARAMETER Thumbprint A string containing the thumbprint of the SSL certificate. .PARAMETER ApplianceId A string containing the ID of the appliance to unassign the SSL certificate from. .INPUTS None. .OUTPUTS JSON response from Safeguard Web API. .EXAMPLE Clear-SafeguardSslCertificateForAppliance -AccessToken $token -Appliance 10.5.32.54 .EXAMPLE Clear-SafeguardSslCertificateForAppliance -Thumbprint 3E1A99AE7ACFB163DEE3CCAC00A437D675937FCA -ApplianceId 00155D26E342 #> function Clear-SafeguardSslCertificateForAppliance { [CmdletBinding()] Param( [Parameter(Mandatory=$false)] [string]$Appliance, [Parameter(Mandatory=$false)] [object]$AccessToken, [Parameter(Mandatory=$false)] [switch]$Insecure, [Parameter(Mandatory=$false,Position=0)] [string]$Thumbprint, [Parameter(Mandatory=$false,Position=1)] [string]$ApplianceId ) if (-not $PSBoundParameters.ContainsKey("ErrorAction")) { $ErrorActionPreference = "Stop" } if (-not $PSBoundParameters.ContainsKey("Verbose")) { $VerbosePreference = $PSCmdlet.GetVariableValue("VerbosePreference") } if (-not $Thumbprint) { $local:CurrentThumbprints = (Get-SafeguardSslCertificate -AccessToken $AccessToken -Appliance $Appliance -Insecure:$Insecure).Thumbprint -join ", " Write-Host "Currently Installed SSL Certificates: [ $($local:CurrentThumbprints) ]" $Thumbprint = (Read-Host "Thumbprint") } if (-not $ApplianceId) { $ApplianceId = (Invoke-SafeguardMethod -Anonymous -Appliance $Appliance -Insecure:$Insecure Notification GET Status).ApplianceId } Write-Host "Clearing $Thumbprint as current SSL Certificate for $ApplianceId..." $local:CurrentIds = (Invoke-SafeguardMethod -AccessToken $AccessToken -Appliance $Appliance -Insecure:$Insecure Core GET "SslCertificates/$Thumbprint/Appliances") $local:NewIds = $local:CurrentIds | Where-Object { $_.Id -ne $ApplianceId } if (-not $local:NewIds) { Invoke-SafeguardMethod -AccessToken $AccessToken -Appliance $Appliance -Insecure:$Insecure Core PUT "SslCertificates/$Thumbprint/Appliances" -JsonBody "[]" } else { Invoke-SafeguardMethod -AccessToken $AccessToken -Appliance $Appliance -Insecure:$Insecure Core PUT "SslCertificates/$Thumbprint/Appliances" -Body $local:NewIds } } <# .SYNOPSIS Get SSL certificate assigned to a specific Safeguard via the Web API. .DESCRIPTION Get the SSL certificate that has been previously assigned to a specific Safeguard appliance. If an appliance ID is not specified to this cmdlet will use the appliance that you are communicating with. .PARAMETER Appliance IP address or hostname of a Safeguard appliance. .PARAMETER AccessToken A string containing the bearer token to be used with Safeguard Web API. .PARAMETER Insecure Ignore verification of Safeguard appliance SSL certificate. .PARAMETER ApplianceId A string containing the ID of the appliance he SSL certificate is assigned to. .PARAMETER Fields An array of the certificate property names to return. .INPUTS None. .OUTPUTS JSON response from Safeguard Web API. .EXAMPLE Get-SafeguardSslCertificateForAppliance -AccessToken $token -Appliance 10.5.32.54 .EXAMPLE Get-SafeguardSslCertificateForAppliance -ApplianceId 00155D26E342 #> function Get-SafeguardSslCertificateForAppliance { [CmdletBinding()] Param( [Parameter(Mandatory=$false)] [string]$Appliance, [Parameter(Mandatory=$false)] [object]$AccessToken, [Parameter(Mandatory=$false)] [switch]$Insecure, [Parameter(Mandatory=$false,Position=1)] [string]$ApplianceId, [Parameter(Mandatory=$false)] [string[]]$Fields ) if (-not $PSBoundParameters.ContainsKey("ErrorAction")) { $ErrorActionPreference = "Stop" } if (-not $PSBoundParameters.ContainsKey("Verbose")) { $VerbosePreference = $PSCmdlet.GetVariableValue("VerbosePreference") } if (-not $ApplianceId) { $ApplianceId = (Invoke-SafeguardMethod -Anonymous -Appliance $Appliance -Insecure:$Insecure Notification GET Status).ApplianceId } $local:Certificates = (Get-SafeguardSslCertificate -AccessToken $AccessToken -Appliance $Appliance -Insecure:$Insecure -Fields Thumbprint) $local:Certificates | ForEach-Object { if (Invoke-SafeguardMethod -AccessToken $AccessToken -Appliance $Appliance -Insecure:$Insecure Core GET "SslCertificates/$($_.Thumbprint)/Appliances" | Where-Object { $_.Id -eq $ApplianceId }) { Get-SafeguardSslCertificate -AccessToken $AccessToken -Appliance $Appliance -Insecure:$Insecure -Thumbprint $_.Thumbprint -Fields $Fields } } } <# .SYNOPSIS Get certificate signing requests that have been generated for Safeguard via the Web API. .DESCRIPTION Safeguard can generate certificate signing requests (CSRs) so that private keys never leave the system. These CSRs can be created for 1) server-side SSL covering the web client and web API, 2) RDP connection signing for RDP session proxy, 3) Timestamping authority for adding trusted timestamps to session recordings, and 4) session recording signing for adding signatures to session recordings to prove they came from Safeguard. This cmdlet gets CSRs that are currently outstanding but that have not yet been signed and returned to Safeguard. Stale CSRs can be deleted via Delete-SafeguardCertificateSigningRequest. .PARAMETER Appliance IP address or hostname of a Safeguard appliance. .PARAMETER AccessToken A string containing the bearer token to be used with Safeguard Web API. .PARAMETER Insecure Ignore verification of Safeguard appliance SSL certificate. .PARAMETER Thumbprint A string containing the thumbprint of a specific CSR. .INPUTS None. .OUTPUTS JSON response from Safeguard Web API. .EXAMPLE Get-SafeguardCertificateSigningRequest -AccessToken $token -Appliance 10.5.32.54 .EXAMPLE Get-SafeguardCertificateSigningRequest D7B8FB86C277BB173E29E368532D8B00E30DBC67 #> function Get-SafeguardCertificateSigningRequest { [CmdletBinding(DefaultParameterSetName="None")] Param( [Parameter(Mandatory=$false)] [string]$Appliance, [Parameter(Mandatory=$false)] [object]$AccessToken, [Parameter(Mandatory=$false)] [switch]$Insecure, [Parameter(ParameterSetName="Single",Mandatory=$true,Position=0)] [string]$Thumbprint ) if (-not $PSBoundParameters.ContainsKey("ErrorAction")) { $ErrorActionPreference = "Stop" } if (-not $PSBoundParameters.ContainsKey("Verbose")) { $VerbosePreference = $PSCmdlet.GetVariableValue("VerbosePreference") } if ($PSBoundParameters.ContainsKey("Thumbprint")) { Invoke-SafeguardMethod -AccessToken $AccessToken -Appliance $Appliance -Insecure:$Insecure Core GET "ServerCertificateSignatureRequests/$Thumbprint" } else { Invoke-SafeguardMethod -AccessToken $AccessToken -Appliance $Appliance -Insecure:$Insecure Core GET "ServerCertificateSignatureRequests" } } New-Alias -Name Get-SafeguardCsr -Value Get-SafeguardCertificateSigningRequest <# .SYNOPSIS Create a certificate signing request in Safeguard via the Web API. .DESCRIPTION Safeguard can generate certificate signing requests (CSRs) so that private keys never leave the system. These CSRs can be created for 1) server-side SSL covering the web client and web API, 2) RDP connection signing for RDP session proxy, 3) Timestamping authority for adding trusted timestamps to session recordings, and 4) session recording signing for adding signatures to session recordings to prove they came from Safeguard. This cmdlet creates new CSRs that . Stale CSRs can be deleted via Delete-SafeguardCertificateSigningRequest. .PARAMETER Appliance IP address or hostname of a Safeguard appliance. .PARAMETER AccessToken A string containing the bearer token to be used with Safeguard Web API. .PARAMETER Insecure Ignore verification of Safeguard appliance SSL certificate. .PARAMETER CertificateType A string containing the type of CSR. .PARAMETER Subject A string containing the distinguished name of the subject of the CSR. .PARAMETER KeyLength An integer containing the key length (1024, 2048, 3072, 4096, default: 2048). .PARAMETER IpAddresses An array of strings containing IP addresses to use in subject alternative names. .PARAMETER DnsNames An array of strings containing DNS names to use in subject alternative names. .INPUTS None. .OUTPUTS JSON response from Safeguard Web API. .EXAMPLE New-SafeguardCertificateSigningRequest -AccessToken $token -Appliance 10.5.32.54 .EXAMPLE New-SafeguardCertificateSigningRequest Ssl "CN=Safeguard,O=OneIdentity" -DnsNames "safeguard.oneidentity.com" -IpAddresses "10.10.10.10" .EXAMPLE New-SafeguardCertificateSigningRequest SessionRecording "CN=SessionSign,O=OneIdentity" sessionsign.csr #> function New-SafeguardCertificateSigningRequest { [CmdletBinding()] Param( [Parameter(Mandatory=$false)] [string]$Appliance, [Parameter(Mandatory=$false)] [object]$AccessToken, [Parameter(Mandatory=$false)] [switch]$Insecure, [Parameter(Mandatory=$true,Position=0)] [ValidateSet('Ssl', 'TimeStamping', 'RdpSigning', 'SessionRecording', 'AuditLogSigning')] [string]$CertificateType, [Parameter(Mandatory=$true,Position=1)] [string]$Subject, [Parameter(Mandatory=$false)] [ValidateSet(1024, 2048, 3072, 4096)] [int]$KeyLength = 2048, [Parameter(Mandatory=$false)] [string[]]$IpAddresses = $null, [Parameter(Mandatory=$false)] [string[]]$DnsNames = $null, [Parameter(Mandatory=$true,Position=2)] [string]$OutFile ) if (-not $PSBoundParameters.ContainsKey("ErrorAction")) { $ErrorActionPreference = "Stop" } if (-not $PSBoundParameters.ContainsKey("Verbose")) { $VerbosePreference = $PSCmdlet.GetVariableValue("VerbosePreference") } $local:Body = @{ CertificateType = $CertificateType; Subject = $Subject; KeyLength = $KeyLength } if ($PSBoundParameters.ContainsKey("IpAddresses")) { Import-Module -Name "$PSScriptRoot\ps-utilities.psm1" -Scope Local $IpAddresses | ForEach-Object { if (-not (Test-IpAddress $_)) { throw "$_ is not an IP address" } } $local:Body.IpAddresses = $IpAddresses } if ($PSBoundParameters.ContainsKey("DnsNames")) { $local:Body.DnsNames = $DnsNames } $local:Csr = (Invoke-SafeguardMethod -AccessToken $AccessToken -Appliance $Appliance -Insecure:$Insecure Core POST "ServerCertificateSignatureRequests" -Body $local:Body) $local:Csr $local:Csr.Base64RequestData | Out-File -Encoding ASCII -FilePath $OutFile -NoNewline Write-Host "CSR saved to '$OutFile'" } New-Alias -Name New-SafeguardCsr -Value New-SafeguardCertificateSigningRequest <# .SYNOPSIS Delete a certificate signing request that has been generated for Safeguard via the Web API. .DESCRIPTION Safeguard can generate certificate signing requests (CSRs) so that private keys never leave the system. These CSRs can be created for 1) server-side SSL covering the web client and web API, 2) RDP connection signing for RDP session proxy, 3) Timestamping authority for adding trusted timestamps to session recordings, and 4) session recording signing for adding signatures to session recordings to prove they came from Safeguard. This cmdlet may be used to delete stale CSRs that have not yet been signed and will never be returned to Safeguard. You can find stale CSRs using Get-SafeguardCertificateSigningRequest. .PARAMETER Appliance IP address or hostname of a Safeguard appliance. .PARAMETER AccessToken A string containing the bearer token to be used with Safeguard Web API. .PARAMETER Insecure Ignore verification of Safeguard appliance SSL certificate. .PARAMETER Thumbprint A string containing the thumbprint of a specific CSR. .INPUTS None. .OUTPUTS JSON response from Safeguard Web API. .EXAMPLE Remove-SafeguardCertificateSigningRequest D7B8FB86C277BB173E29E368532D8B00E30DBC67 #> function Remove-SafeguardCertificateSigningRequest { [CmdletBinding()] Param( [Parameter(Mandatory=$false)] [string]$Appliance, [Parameter(Mandatory=$false)] [object]$AccessToken, [Parameter(Mandatory=$false)] [switch]$Insecure, [Parameter(Mandatory=$true,Position=0)] [string]$Thumbprint ) if (-not $PSBoundParameters.ContainsKey("ErrorAction")) { $ErrorActionPreference = "Stop" } if (-not $PSBoundParameters.ContainsKey("Verbose")) { $VerbosePreference = $PSCmdlet.GetVariableValue("VerbosePreference") } Invoke-SafeguardMethod -AccessToken $AccessToken -Appliance $Appliance -Insecure:$Insecure Core DELETE "ServerCertificateSignatureRequests/$Thumbprint" } New-Alias -Name Remove-SafeguardCsr -Value Remove-SafeguardCertificateSigningRequest <# .SYNOPSIS Create test certificates for use with Safeguard. .DESCRIPTION Creates test certificates for use with Safeguard. This cmdlet will create a new root CA, an intermediate CA, a user certificate, and a server SSL certificate. The user certificate can be used for login. The SSL certificate can be used to secure Safeguard. .PARAMETER SubjectBaseDn A string containing the subject base Dn (e.g. ""). .PARAMETER KeySize An integer with the RSA key size. .PARAMETER Insecure Ignore verification of Safeguard appliance SSL certificate--will be ignored for entire session. .INPUTS None. .OUTPUTS None. Just host messages describing what has been created. .EXAMPLE New-SafeguardTestCertificates -SubjectBaseDn "OU=petrsnd,O=OneIdentityInc,C=US" .EXAMPLE New-SafeguardTestCertificates #> function New-SafeguardTestCertificatePki { [CmdletBinding()] Param( [Parameter(Mandatory=$true)] [string]$SubjectBaseDn, [Parameter(Mandatory=$false)] [int]$KeySize = 2048, [Parameter(Mandatory=$false)] $OutputDirectory ) if (-not $PSBoundParameters.ContainsKey("ErrorAction")) { $ErrorActionPreference = "Stop" } if (-not $PSBoundParameters.ContainsKey("Verbose")) { $VerbosePreference = $PSCmdlet.GetVariableValue("VerbosePreference") } Import-Module -Name "$PSScriptRoot\ps-utilities.psm1" -Scope Local if (-not $OutputDirectory) { $OutputDirectory = (Join-Path (Get-Location) ("CERTS-{0}" -f (Get-Date -format s) -replace ':','-')) } else { $OutputDirectory = (Join-Path $OutputDirectory ("CERTS-{0}" -f (Get-Date -format s) -replace ':','-')) } Write-Host -ForegroundColor Yellow "Locating tools" $local:MakeCert = (Get-Tool @("C:\Program Files (x86)\Windows Kits", "C:\Program Files (x86)\Microsoft SDKs\Windows") "makecert.exe") $local:Pvk2Pfx = (Get-Tool @("C:\Program Files (x86)\Windows Kits", "C:\Program Files (x86)\Microsoft SDKs\Windows") "pvk2pfx.exe") $local:CertUtil = (Join-Path $env:windir "system32\certutil.exe") Write-Host "Creating Directory: $OutputDirectory" New-Item -ItemType Directory -Force -Path $OutputDirectory | Out-Null Write-Host -ForegroundColor Yellow "Generating Certificates" Write-Host "This cmdlet can be annoying because you have to type your password a lot... this is a limitation of the underlying tools" Write-Host -ForegroundColor Yellow "Just type the same password at all of the prompts!!! It can be as simple as one letter." $local:PasswordSecure = (Read-Host "Password" -AsSecureString) $local:Password = [System.Net.NetworkCredential]::new("", $local:PasswordSecure).Password $local:Name = "RootCA" $local:Subject = "CN=$($local:Name),$($local:SubjectBaseDn)" Write-Host "Creating Root CA Certificate as $($local:Subject)" Invoke-Expression ("& '$($local:MakeCert)' -n '$($local:Subject)' -r -a sha256 -len $($local:KeySize) -m 240 -cy authority -sky signature -sv '$OutputDirectory\$($local:Name).pvk' '$OutputDirectory\$($local:Name).cer'") Invoke-Expression ("& '$($local:CertUtil)' -encode '$OutputDirectory\$($local:Name).cer' '$OutputDirectory\$($local:Name).pem'") Invoke-Expression ("& '$($local:Pvk2Pfx)' -pvk '$OutputDirectory\$($local:Name).pvk' -spc '$OutputDirectory\$($local:Name).cer' -pfx '$OutputDirectory\$($local:Name).pfx' -pi $($local:Password)") $local:Issuer = "RootCA" $local:Name = "IntermediateCA" $local:Subject = "CN=$($local:Name),$SubjectBaseDn" Write-Host "Creating Intermediate CA Certificate as $($local:Subject)" Invoke-Expression ("& '$($local:MakeCert)' -n '$($local:Subject)' -a sha256 -len $KeySize -m 240 -cy authority -sky signature -iv '$OutputDirectory\$($local:Issuer).pvk' -ic '$OutputDirectory\$($local:Issuer).cer' -sv '$OutputDirectory\$($local:Name).pvk' '$OutputDirectory\$($local:Name).cer'") Invoke-Expression ("& '$($local:CertUtil)' -encode '$OutputDirectory\$($local:Name).cer' '$OutputDirectory\$($local:Name).pem'") Invoke-Expression ("& '$($local:Pvk2Pfx)' -pvk '$OutputDirectory\$($local:Name).pvk' -spc '$OutputDirectory\$($local:Name).cer' -pfx '$OutputDirectory\$($local:Name).pfx' -pi $($local:Password)") $local:Issuer = "IntermediateCA" $local:Name = "UserCert" $local:Subject = "CN=$($local:Name),$SubjectBaseDn" Write-Host "Creating User Certificate as $($local:Subject)" Invoke-Expression ("& '$($local:MakeCert)' -n '$($local:Subject)' -a sha256 -len $KeySize -m 120 -cy end -sky exchange -eku '1.3.6.1.4.1.311.10.3.4,1.3.6.1.5.5.7.3.4,1.3.6.1.5.5.7.3.2' -iv '$OutputDirectory\$($local:Issuer).pvk' -ic '$OutputDirectory\$($local:Issuer).cer' -sv '$OutputDirectory\$($local:Name).pvk' '$OutputDirectory\$($local:Name).cer'") Invoke-Expression ("& '$($local:CertUtil)' -encode '$OutputDirectory\$($local:Name).cer' '$OutputDirectory\$($local:Name).pem'") Invoke-Expression ("& '$($local:Pvk2Pfx)' -pvk '$OutputDirectory\$($local:Name).pvk' -spc '$OutputDirectory\$($local:Name).cer' -pfx '$OutputDirectory\$($local:Name).pfx' -pi $($local:Password)") $local:Issuer = "IntermediateCA" Write-Host "The IP address of your host is necessary to define the SSL Certificate subject name" $local:Name = Read-Host "IPAddress" $local:Subject = "CN=$($local:Name),$SubjectBaseDn" Write-Host "Creating User Certificate as $($local:Subject)" Invoke-Expression ("& '$($local:MakeCert)' -n '$($local:Subject)' -a sha256 -len $KeySize -m 120 -cy end -sky exchange -eku '1.3.6.1.5.5.7.3.1' -iv '$OutputDirectory\$($local:Issuer).pvk' -ic '$OutputDirectory\$($local:Issuer).cer' -sv '$OutputDirectory\$($local:Name).pvk' '$OutputDirectory\$($local:Name).cer'") Invoke-Expression ("& '$($local:CertUtil)' -encode '$OutputDirectory\$($local:Name).cer' '$OutputDirectory\$($local:Name).pem'") Invoke-Expression ("& '$($local:Pvk2Pfx)' -pvk '$OutputDirectory\$($local:Name).pvk' -spc '$OutputDirectory\$($local:Name).cer' -pfx '$OutputDirectory\$($local:Name).pfx' -pi $($local:Password)") Write-Host -ForegroundColor Yellow "You now have four certificates in $OutputDirectory." Write-Host -ForegroundColor Green "To setup Safeguard SSL:" Write-Host "- Upload both RootCA and IntermediateCA to Safeguard using Install-SafeguardTrustedCertificate cmdlet" Write-Host "- Upload the certificate with the IP address to Safeguard using Install-SafeguardSSlCertificate cmdlet" Write-Host "- Import RootCA into your trusted root store using 'Run -> certmgr.msc'" Write-Host "- Import IntermediateCA into your intermediate store using 'Run -> certmgr.msc'" Write-Host "- Then, open a browser to Safeguard... if the IP address matches the subject you gave it should work" Write-Host -ForegroundColor Green "To setup client certificate user login:" Write-Host "- Upload both RootCA and IntermediateCA if you haven't already using Install-SafeguardTrustedCertificate cmdlet" Write-Host "- Import UserCert into your personal user store" Write-Host "- Create a user with the PrimaryAuthenticationIdentity set to the thumbprint of UserCert" Write-Host " - You can see your installed certificate thumbprints with: gci Cert:\CurrentUser\My\" Write-Host " - The POST to create the user will need a body like this: -Body @{`n" ` " `"PrimaryAuthenticationProviderId`" = -2;`n" ` " `"UserName`" = `"CertBoy`";`n" ` " `"PrimaryAuthenticationIdentity`" = `"<thumbprint>`" }" Write-Host "- Test it by getting a token: Connect-Safeguard -Thumbprint `"<thumbprint>`"" } |