VaporShell.WAF.psm1
|
# PSM1 Contents function Format-Json { [CmdletBinding()] Param ( [Parameter(Mandatory = $true, Position = 0, ValueFromPipeline = $true)] [String] $Json ) Begin { $cleaner = { param([String]$Line) Process{ [Regex]::Replace( $Line, "\\u(?<Value>[a-zA-Z0-9]{4})", { param($m)([char]([int]::Parse( $m.Groups['Value'].Value, [System.Globalization.NumberStyles]::HexNumber ))).ToString() } ) } } } Process { if ($PSVersionTable.PSVersion.Major -lt 6) { try { $indent = 0; $res = $Json -split '\n' | ForEach-Object { if ($_ -match '[\}\]]') { # This line contains ] or }, decrement the indentation level $indent-- } $line = (' ' * $indent * 2) + $_.TrimStart().Replace(': ', ': ') if ($_ -match '[\{\[]') { # This line contains [ or {, increment the indentation level $indent++ } $cleaner.Invoke($line) } $res -join "`n" } catch { ($Json -split '\n' | ForEach-Object {$cleaner.Invoke($_)}) -join "`n" } } else { ($Json -split '\n' | ForEach-Object {$cleaner.Invoke($_)}) -join "`n" } } } function Get-TrueCount { Param ( [parameter(Mandatory = $false,Position = 0,ValueFromPipeline = $true)] $Array ) Process { if ($array) { if ($array.Count) { $count = $array.Count } else { $count = 1 } } else { $count = 0 } } End { return $count } } function New-VSError { <# .SYNOPSIS Error generator function to use in tandem with $PSCmdlet.ThrowTerminatingError() .PARAMETER Result Allows input of an error from AWS SDK, resulting in the Exception message being parsed out. .PARAMETER String Used to create basic String message errors in the same wrapper #> [cmdletbinding(DefaultParameterSetName="Result")] param( [parameter(Position=0,ParameterSetName="Result")] $Result, [parameter(Position=0,ParameterSetName="String")] $String ) switch ($PSCmdlet.ParameterSetName) { Result { $Exception = "$($result.Exception.InnerException.Message)" } String { $Exception = "$String" } } $e = New-Object "System.Exception" $Exception $errorRecord = New-Object 'System.Management.Automation.ErrorRecord' $e, $null, ([System.Management.Automation.ErrorCategory]::InvalidOperation), $null return $errorRecord } function ResolveS3Endpoint { <# .SYNOPSIS Resolves the S3 endpoint most appropriate for each region. #> Param ( [parameter(Mandatory=$true,Position=0)] [ValidateSet("eu-west-2","ap-south-1","us-east-2","sa-east-1","us-west-1","us-west-2","eu-west-1","ap-southeast-2","ca-central-1","ap-northeast-2","us-east-1","eu-central-1","ap-southeast-1","ap-northeast-1")] [String] $Region ) $endpointMap = @{ "us-east-2" = "s3.us-east-2.amazonaws.com" "us-east-1" = "s3.amazonaws.com" "us-west-1" = "s3-us-west-1.amazonaws.com" "us-west-2" = "s3-us-west-2.amazonaws.com" "ca-central-1" = "s3.ca-central-1.amazonaws.com" "ap-south-1" = "s3.ap-south-1.amazonaws.com" "ap-northeast-2" = "s3.ap-northeast-2.amazonaws.com" "ap-southeast-1" = "s3-ap-southeast-1.amazonaws.com" "ap-southeast-2" = "s3-ap-southeast-2.amazonaws.com" "ap-northeast-1" = "s3-ap-northeast-1.amazonaws.com" "eu-central-1" = "s3.eu-central-1.amazonaws.com" "eu-west-1" = "s3-eu-west-1.amazonaws.com" "eu-west-2" = "s3.eu-west-2.amazonaws.com" "sa-east-1" = "s3-sa-east-1.amazonaws.com" } return $endpointMap[$Region] } function Add-VSWAFByteMatchSetByteMatchTuple { <# .SYNOPSIS Adds an AWS::WAF::ByteMatchSet.ByteMatchTuple resource property to the template. **Note** .DESCRIPTION Adds an AWS::WAF::ByteMatchSet.ByteMatchTuple resource property to the template. **Note** This is **AWS WAF Classic** documentation. For more information, see AWS WAF Classic: https://docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html in the developer guide. **For the latest version of AWS WAF**, use the AWS WAFV2 API and see the AWS WAF Developer Guide: https://docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html. With the latest version, AWS WAF has a single set of endpoints for regional and global use. The bytes (typically a string that corresponds with ASCII characters that you want AWS WAF to search for in web requests, the location in requests that you want AWS WAF to search, and other settings. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-waf-bytematchset-bytematchtuples.html .PARAMETER FieldToMatch The part of a web request that you want AWS WAF to search, such as a specified header or a query string. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-waf-bytematchset-bytematchtuples.html#cfn-waf-bytematchset-bytematchtuples-fieldtomatch Type: FieldToMatch UpdateType: Mutable .PARAMETER PositionalConstraint Within the portion of a web request that you want to search for example, in the query string, if any, specify where you want AWS WAF to search. Valid values include the following: **CONTAINS** The specified part of the web request must include the value of TargetString, but the location doesn't matter. **CONTAINS_WORD** The specified part of the web request must include the value of TargetString, and TargetString must contain only alphanumeric characters or underscore A-Z, a-z, 0-9, or _. In addition, TargetString must be a word, which means one of the following: + TargetString exactly matches the value of the specified part of the web request, such as the value of a header. + TargetString is at the beginning of the specified part of the web request and is followed by a character other than an alphanumeric character or underscore _, for example, BadBot;. + TargetString is at the end of the specified part of the web request and is preceded by a character other than an alphanumeric character or underscore _, for example, ;BadBot. + TargetString is in the middle of the specified part of the web request and is preceded and followed by characters other than alphanumeric characters or underscore _, for example, -BadBot;. **EXACTLY** The value of the specified part of the web request must exactly match the value of TargetString. **STARTS_WITH** The value of TargetString must appear at the beginning of the specified part of the web request. **ENDS_WITH** The value of TargetString must appear at the end of the specified part of the web request. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-waf-bytematchset-bytematchtuples.html#cfn-waf-bytematchset-bytematchtuples-positionalconstraint PrimitiveType: String UpdateType: Mutable .PARAMETER TargetString The value that you want AWS WAF to search for. AWS WAF searches for the specified string in the part of web requests that you specified in FieldToMatch. The maximum length of the value is 50 bytes. You must specify this property or the TargetStringBase64 property. Valid values depend on the values that you specified for FieldToMatch: + HEADER: The value that you want AWS WAF to search for in the request header that you specified in FieldToMatch, for example, the value of the User-Agent or Referer header. + METHOD: The HTTP method, which indicates the type of operation specified in the request. CloudFront supports the following methods: DELETE, GET, HEAD, OPTIONS, PATCH, POST, and PUT. + QUERY_STRING: The value that you want AWS WAF to search for in the query string, which is the part of a URL that appears after a ? character. + URI: The value that you want AWS WAF to search for in the part of a URL that identifies a resource, for example, /images/daily-ad.jpg. + BODY: The part of a request that contains any additional data that you want to send to your web server as the HTTP request body, such as data from a form. The request body immediately follows the request headers. Note that only the first 8192 bytes of the request body are forwarded to AWS WAF for inspection. To allow or block requests based on the length of the body, you can create a size constraint set. + SINGLE_QUERY_ARG: The parameter in the query string that you will inspect, such as *UserName* or *SalesRegion*. The maximum length for SINGLE_QUERY_ARG is 30 characters. + ALL_QUERY_ARGS: Similar to SINGLE_QUERY_ARG, but instead of inspecting a single parameter, AWS WAF inspects all parameters within the query string for the value or regex pattern that you specify in TargetString. If TargetString includes alphabetic characters A-Z and a-z, note that the value is case sensitive. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-waf-bytematchset-bytematchtuples.html#cfn-waf-bytematchset-bytematchtuples-targetstring PrimitiveType: String UpdateType: Mutable .PARAMETER TargetStringBase64 The base64-encoded value that AWS WAF searches for. AWS CloudFormation sends this value to AWS WAF without encoding it. You must specify this property or the TargetString property. AWS WAF searches for this value in a specific part of web requests, which you define in the FieldToMatch property. Valid values depend on the Type value in the FieldToMatch property. For example, for a METHOD type, you must specify HTTP methods such as DELETE, GET, HEAD, OPTIONS, PATCH, POST, and PUT. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-waf-bytematchset-bytematchtuples.html#cfn-waf-bytematchset-bytematchtuples-targetstringbase64 PrimitiveType: String UpdateType: Mutable .PARAMETER TextTransformation Text transformations eliminate some of the unusual formatting that attackers use in web requests in an effort to bypass AWS WAF. If you specify a transformation, AWS WAF performs the transformation on FieldToMatch before inspecting it for a match. You can only specify a single type of TextTransformation. **CMD_LINE** When you're concerned that attackers are injecting an operating system command line command and using unusual formatting to disguise some or all of the command, use this option to perform the following transformations: + Delete the following characters: " ' ^ + Delete spaces before the following characters: / + Replace the following characters with a space: , ; + Replace multiple spaces with one space + Convert uppercase letters A-Z to lowercase a-z **COMPRESS_WHITE_SPACE** Use this option to replace the following characters with a space character decimal 32: + f, formfeed, decimal 12 + t, tab, decimal 9 + n, newline, decimal 10 + r, carriage return, decimal 13 + v, vertical tab, decimal 11 + non-breaking space, decimal 160 COMPRESS_WHITE_SPACE also replaces multiple spaces with one space. **HTML_ENTITY_DECODE** Use this option to replace HTML-encoded characters with unencoded characters. HTML_ENTITY_DECODE performs the following operations: + Replaces ampersandquot; with " + Replaces ampersandnbsp; with a non-breaking space, decimal 160 + Replaces ampersandlt; with a "less than" symbol + Replaces ampersandgt; with > + Replaces characters that are represented in hexadecimal format, ampersand#xhhhh;, with the corresponding characters + Replaces characters that are represented in decimal format, ampersand#nnnn;, with the corresponding characters **LOWERCASE** Use this option to convert uppercase letters A-Z to lowercase a-z. **URL_DECODE** Use this option to decode a URL-encoded value. **NONE** Specify NONE if you don't want to perform any text transformations. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-waf-bytematchset-bytematchtuples.html#cfn-waf-bytematchset-bytematchtuples-texttransformation PrimitiveType: String UpdateType: Mutable .FUNCTIONALITY Vaporshell #> [OutputType([WAFByteMatchSetByteMatchTuple])] [cmdletbinding()] Param( [parameter(Mandatory = $true)] $FieldToMatch, [parameter(Mandatory = $true)] [object] $PositionalConstraint, [parameter(Mandatory = $false)] [object] $TargetString, [parameter(Mandatory = $false)] [object] $TargetStringBase64, [parameter(Mandatory = $true)] [object] $TextTransformation ) Process { $obj = [WAFByteMatchSetByteMatchTuple]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSWAFByteMatchSetByteMatchTuple' function Add-VSWAFByteMatchSetFieldToMatch { <# .SYNOPSIS Adds an AWS::WAF::ByteMatchSet.FieldToMatch resource property to the template. **Note** .DESCRIPTION Adds an AWS::WAF::ByteMatchSet.FieldToMatch resource property to the template. **Note** This is **AWS WAF Classic** documentation. For more information, see AWS WAF Classic: https://docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html in the developer guide. **For the latest version of AWS WAF**, use the AWS WAFV2 API and see the AWS WAF Developer Guide: https://docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Specifies where in a web request to look for TargetString. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-waf-bytematchset-bytematchtuples-fieldtomatch.html .PARAMETER Data When the value of Type is HEADER, enter the name of the header that you want AWS WAF to search, for example, User-Agent or Referer. The name of the header is not case sensitive. When the value of Type is SINGLE_QUERY_ARG, enter the name of the parameter that you want AWS WAF to search, for example, UserName or SalesRegion. The parameter name is not case sensitive. If the value of Type is any other value, omit Data. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-waf-bytematchset-bytematchtuples-fieldtomatch.html#cfn-waf-bytematchset-bytematchtuples-fieldtomatch-data PrimitiveType: String UpdateType: Mutable .PARAMETER Type The part of the web request that you want AWS WAF to search for a specified string. Parts of a request that you can search include the following: + HEADER: A specified request header, for example, the value of the User-Agent or Referer header. If you choose HEADER for the type, specify the name of the header in Data. + METHOD: The HTTP method, which indicated the type of operation that the request is asking the origin to perform. Amazon CloudFront supports the following methods: DELETE, GET, HEAD, OPTIONS, PATCH, POST, and PUT. + QUERY_STRING: A query string, which is the part of a URL that appears after a ? character, if any. + URI: The part of a web request that identifies a resource, for example, /images/daily-ad.jpg. + BODY: The part of a request that contains any additional data that you want to send to your web server as the HTTP request body, such as data from a form. The request body immediately follows the request headers. Note that only the first 8192 bytes of the request body are forwarded to AWS WAF for inspection. To allow or block requests based on the length of the body, you can create a size constraint set. + SINGLE_QUERY_ARG: The parameter in the query string that you will inspect, such as *UserName* or *SalesRegion*. The maximum length for SINGLE_QUERY_ARG is 30 characters. + ALL_QUERY_ARGS: Similar to SINGLE_QUERY_ARG, but rather than inspecting a single parameter, AWS WAF will inspect all parameters within the query for the value or regex pattern that you specify in TargetString. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-waf-bytematchset-bytematchtuples-fieldtomatch.html#cfn-waf-bytematchset-bytematchtuples-fieldtomatch-type PrimitiveType: String UpdateType: Mutable .FUNCTIONALITY Vaporshell #> [OutputType([WAFByteMatchSetFieldToMatch])] [cmdletbinding()] Param( [parameter(Mandatory = $false)] [object] $Data, [parameter(Mandatory = $true)] [object] $Type ) Process { $obj = [WAFByteMatchSetFieldToMatch]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSWAFByteMatchSetFieldToMatch' function Add-VSWAFIPSetIPSetDescriptor { <# .SYNOPSIS Adds an AWS::WAF::IPSet.IPSetDescriptor resource property to the template. **Note** .DESCRIPTION Adds an AWS::WAF::IPSet.IPSetDescriptor resource property to the template. **Note** This is **AWS WAF Classic** documentation. For more information, see AWS WAF Classic: https://docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html in the developer guide. **For the latest version of AWS WAF**, use the AWS WAFV2 API and see the AWS WAF Developer Guide: https://docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Specifies the IP address type (IPV4 or IPV6 and the IP address range (in CIDR format that web requests originate from. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-waf-ipset-ipsetdescriptors.html .PARAMETER Type Specify IPV4 or IPV6. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-waf-ipset-ipsetdescriptors.html#cfn-waf-ipset-ipsetdescriptors-type PrimitiveType: String UpdateType: Mutable .PARAMETER Value Specify an IPv4 address by using CIDR notation. For example: + To configure AWS WAF to allow, block, or count requests that originated from the IP address 192.0.2.44, specify 192.0.2.44/32. + To configure AWS WAF to allow, block, or count requests that originated from IP addresses from 192.0.2.0 to 192.0.2.255, specify 192.0.2.0/24. For more information about CIDR notation, see the Wikipedia entry Classless Inter-Domain Routing: https://en.wikipedia.org/wiki/Classless_Inter-Domain_Routing. Specify an IPv6 address by using CIDR notation. For example: + To configure AWS WAF to allow, block, or count requests that originated from the IP address 1111:0000:0000:0000:0000:0000:0000:0111, specify 1111:0000:0000:0000:0000:0000:0000:0111/128. + To configure AWS WAF to allow, block, or count requests that originated from IP addresses 1111:0000:0000:0000:0000:0000:0000:0000 to 1111:0000:0000:0000:ffff:ffff:ffff:ffff, specify 1111:0000:0000:0000:0000:0000:0000:0000/64. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-waf-ipset-ipsetdescriptors.html#cfn-waf-ipset-ipsetdescriptors-value PrimitiveType: String UpdateType: Mutable .FUNCTIONALITY Vaporshell #> [OutputType([WAFIPSetIPSetDescriptor])] [cmdletbinding()] Param( [parameter(Mandatory = $true)] [object] $Type, [parameter(Mandatory = $true)] [object] $Value ) Process { $obj = [WAFIPSetIPSetDescriptor]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSWAFIPSetIPSetDescriptor' function Add-VSWAFRulePredicate { <# .SYNOPSIS Adds an AWS::WAF::Rule.Predicate resource property to the template. Specifies the ByteMatchSet, IPSet, SqlInjectionMatchSet, XssMatchSet, RegexMatchSet, GeoMatchSet, and SizeConstraintSet objects that you want to add to a Rule and, for each object, indicates whether you want to negate the settings, for example, requests that do NOT originate from the IP address 192.0.2.44. .DESCRIPTION Adds an AWS::WAF::Rule.Predicate resource property to the template. Specifies the ByteMatchSet, IPSet, SqlInjectionMatchSet, XssMatchSet, RegexMatchSet, GeoMatchSet, and SizeConstraintSet objects that you want to add to a Rule and, for each object, indicates whether you want to negate the settings, for example, requests that do NOT originate from the IP address 192.0.2.44. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-waf-rule-predicates.html .PARAMETER DataId A unique identifier for a predicate in a Rule, such as ByteMatchSetId or IPSetId. The ID is returned by the corresponding Create or List command. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-waf-rule-predicates.html#cfn-waf-rule-predicates-dataid PrimitiveType: String UpdateType: Mutable .PARAMETER Negated Set Negated to False if you want AWS WAF to allow, block, or count requests based on the settings in the specified ByteMatchSet, IPSet, SqlInjectionMatchSet, XssMatchSet, RegexMatchSet, GeoMatchSet, or SizeConstraintSet. For example, if an IPSet includes the IP address 192.0.2.44, AWS WAF will allow or block requests based on that IP address. Set Negated to True if you want AWS WAF to allow or block a request based on the negation of the settings in the ByteMatchSet, IPSet, SqlInjectionMatchSet, XssMatchSet, RegexMatchSet, GeoMatchSet, or SizeConstraintSet. For example, if an IPSet includes the IP address 192.0.2.44, AWS WAF will allow, block, or count requests based on all IP addresses *except* 192.0.2.44. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-waf-rule-predicates.html#cfn-waf-rule-predicates-negated PrimitiveType: Boolean UpdateType: Mutable .PARAMETER Type The type of predicate in a Rule, such as ByteMatch or IPSet. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-waf-rule-predicates.html#cfn-waf-rule-predicates-type PrimitiveType: String UpdateType: Mutable .FUNCTIONALITY Vaporshell #> [OutputType([WAFRulePredicate])] [cmdletbinding()] Param( [parameter(Mandatory = $true)] [object] $DataId, [parameter(Mandatory = $true)] [object] $Negated, [parameter(Mandatory = $true)] [object] $Type ) Process { $obj = [WAFRulePredicate]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSWAFRulePredicate' function Add-VSWAFSizeConstraintSetFieldToMatch { <# .SYNOPSIS Adds an AWS::WAF::SizeConstraintSet.FieldToMatch resource property to the template. Specifies the part of a web request that you want AWS WAF to check for a size constraint, such as a specific header or a query string. .DESCRIPTION Adds an AWS::WAF::SizeConstraintSet.FieldToMatch resource property to the template. Specifies the part of a web request that you want AWS WAF to check for a size constraint, such as a specific header or a query string. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-waf-sizeconstraintset-sizeconstraint-fieldtomatch.html .PARAMETER Data When the value of Type is HEADER, enter the name of the header that you want AWS WAF to search, for example, User-Agent or Referer. The name of the header is not case sensitive. When the value of Type is SINGLE_QUERY_ARG, enter the name of the parameter that you want AWS WAF to search, for example, UserName or SalesRegion. The parameter name is not case sensitive. If the value of Type is any other value, omit Data. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-waf-sizeconstraintset-sizeconstraint-fieldtomatch.html#cfn-waf-sizeconstraintset-sizeconstraint-fieldtomatch-data PrimitiveType: String UpdateType: Mutable .PARAMETER Type The part of the web request that you want AWS WAF to search for a specified string. Parts of a request that you can search include the following: + HEADER: A specified request header, for example, the value of the User-Agent or Referer header. If you choose HEADER for the type, specify the name of the header in Data. + METHOD: The HTTP method, which indicated the type of operation that the request is asking the origin to perform. Amazon CloudFront supports the following methods: DELETE, GET, HEAD, OPTIONS, PATCH, POST, and PUT. + QUERY_STRING: A query string, which is the part of a URL that appears after a ? character, if any. + URI: The part of a web request that identifies a resource, for example, /images/daily-ad.jpg. + BODY: The part of a request that contains any additional data that you want to send to your web server as the HTTP request body, such as data from a form. The request body immediately follows the request headers. Note that only the first 8192 bytes of the request body are forwarded to AWS WAF for inspection. To allow or block requests based on the length of the body, you can create a size constraint set. + SINGLE_QUERY_ARG: The parameter in the query string that you will inspect, such as *UserName* or *SalesRegion*. The maximum length for SINGLE_QUERY_ARG is 30 characters. + ALL_QUERY_ARGS: Similar to SINGLE_QUERY_ARG, but rather than inspecting a single parameter, AWS WAF will inspect all parameters within the query for the value or regex pattern that you specify in TargetString. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-waf-sizeconstraintset-sizeconstraint-fieldtomatch.html#cfn-waf-sizeconstraintset-sizeconstraint-fieldtomatch-type PrimitiveType: String UpdateType: Mutable .FUNCTIONALITY Vaporshell #> [OutputType([WAFSizeConstraintSetFieldToMatch])] [cmdletbinding()] Param( [parameter(Mandatory = $false)] [object] $Data, [parameter(Mandatory = $true)] [object] $Type ) Process { $obj = [WAFSizeConstraintSetFieldToMatch]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSWAFSizeConstraintSetFieldToMatch' function Add-VSWAFSizeConstraintSetSizeConstraint { <# .SYNOPSIS Adds an AWS::WAF::SizeConstraintSet.SizeConstraint resource property to the template. **Note** .DESCRIPTION Adds an AWS::WAF::SizeConstraintSet.SizeConstraint resource property to the template. **Note** This is **AWS WAF Classic** documentation. For more information, see AWS WAF Classic: https://docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html in the developer guide. **For the latest version of AWS WAF**, use the AWS WAFV2 API and see the AWS WAF Developer Guide: https://docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Specifies a constraint on the size of a part of the web request. AWS WAF uses the Size, ComparisonOperator, and FieldToMatch to build an expression in the form of "Size ComparisonOperator size in bytes of FieldToMatch". If that expression is true, the SizeConstraint is considered to match. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-waf-sizeconstraintset-sizeconstraint.html .PARAMETER ComparisonOperator The type of comparison you want AWS WAF to perform. AWS WAF uses this in combination with the provided Size and FieldToMatch to build an expression in the form of "Size ComparisonOperator size in bytes of FieldToMatch". If that expression is true, the SizeConstraint is considered to match. **EQ**: Used to test if the Size is equal to the size of the FieldToMatch **NE**: Used to test if the Size is not equal to the size of the FieldToMatch **LE**: Used to test if the Size is less than or equal to the size of the FieldToMatch **LT**: Used to test if the Size is strictly less than the size of the FieldToMatch **GE**: Used to test if the Size is greater than or equal to the size of the FieldToMatch **GT**: Used to test if the Size is strictly greater than the size of the FieldToMatch Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-waf-sizeconstraintset-sizeconstraint.html#cfn-waf-sizeconstraintset-sizeconstraint-comparisonoperator PrimitiveType: String UpdateType: Mutable .PARAMETER FieldToMatch Specifies where in a web request to look for the size constraint. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-waf-sizeconstraintset-sizeconstraint.html#cfn-waf-sizeconstraintset-sizeconstraint-fieldtomatch Type: FieldToMatch UpdateType: Mutable .PARAMETER Size The size in bytes that you want AWS WAF to compare against the size of the specified FieldToMatch. AWS WAF uses this in combination with ComparisonOperator and FieldToMatch to build an expression in the form of "Size ComparisonOperator size in bytes of FieldToMatch". If that expression is true, the SizeConstraint is considered to match. Valid values for size are 0 - 21474836480 bytes 0 - 20 GB. If you specify URI for the value of Type, the / in the URI counts as one character. For example, the URI /logo.jpg is nine characters long. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-waf-sizeconstraintset-sizeconstraint.html#cfn-waf-sizeconstraintset-sizeconstraint-size PrimitiveType: Integer UpdateType: Mutable .PARAMETER TextTransformation Text transformations eliminate some of the unusual formatting that attackers use in web requests in an effort to bypass AWS WAF. If you specify a transformation, AWS WAF performs the transformation on FieldToMatch before inspecting it for a match. You can only specify a single type of TextTransformation. Note that if you choose BODY for the value of Type, you must choose NONE for TextTransformation because CloudFront forwards only the first 8192 bytes for inspection. **NONE** Specify NONE if you don't want to perform any text transformations. **CMD_LINE** When you're concerned that attackers are injecting an operating system command line command and using unusual formatting to disguise some or all of the command, use this option to perform the following transformations: + Delete the following characters: " ' ^ + Delete spaces before the following characters: / + Replace the following characters with a space: , ; + Replace multiple spaces with one space + Convert uppercase letters A-Z to lowercase a-z **COMPRESS_WHITE_SPACE** Use this option to replace the following characters with a space character decimal 32: + f, formfeed, decimal 12 + t, tab, decimal 9 + n, newline, decimal 10 + r, carriage return, decimal 13 + v, vertical tab, decimal 11 + non-breaking space, decimal 160 COMPRESS_WHITE_SPACE also replaces multiple spaces with one space. **HTML_ENTITY_DECODE** Use this option to replace HTML-encoded characters with unencoded characters. HTML_ENTITY_DECODE performs the following operations: + Replaces ampersandquot; with " + Replaces ampersandnbsp; with a non-breaking space, decimal 160 + Replaces ampersandlt; with a "less than" symbol + Replaces ampersandgt; with > + Replaces characters that are represented in hexadecimal format, ampersand#xhhhh;, with the corresponding characters + Replaces characters that are represented in decimal format, ampersand#nnnn;, with the corresponding characters **LOWERCASE** Use this option to convert uppercase letters A-Z to lowercase a-z. **URL_DECODE** Use this option to decode a URL-encoded value. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-waf-sizeconstraintset-sizeconstraint.html#cfn-waf-sizeconstraintset-sizeconstraint-texttransformation PrimitiveType: String UpdateType: Mutable .FUNCTIONALITY Vaporshell #> [OutputType([WAFSizeConstraintSetSizeConstraint])] [cmdletbinding()] Param( [parameter(Mandatory = $true)] [object] $ComparisonOperator, [parameter(Mandatory = $true)] $FieldToMatch, [parameter(Mandatory = $true)] [object] $Size, [parameter(Mandatory = $true)] [object] $TextTransformation ) Process { $obj = [WAFSizeConstraintSetSizeConstraint]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSWAFSizeConstraintSetSizeConstraint' function Add-VSWAFSqlInjectionMatchSetFieldToMatch { <# .SYNOPSIS Adds an AWS::WAF::SqlInjectionMatchSet.FieldToMatch resource property to the template. **Note** .DESCRIPTION Adds an AWS::WAF::SqlInjectionMatchSet.FieldToMatch resource property to the template. **Note** This is **AWS WAF Classic** documentation. For more information, see AWS WAF Classic: https://docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html in the developer guide. **For the latest version of AWS WAF**, use the AWS WAFV2 API and see the AWS WAF Developer Guide: https://docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Specifies where in a web request to look for TargetString. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-waf-bytematchset-bytematchtuples-fieldtomatch.html .PARAMETER Data When the value of Type is HEADER, enter the name of the header that you want AWS WAF to search, for example, User-Agent or Referer. The name of the header is not case sensitive. When the value of Type is SINGLE_QUERY_ARG, enter the name of the parameter that you want AWS WAF to search, for example, UserName or SalesRegion. The parameter name is not case sensitive. If the value of Type is any other value, omit Data. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-waf-bytematchset-bytematchtuples-fieldtomatch.html#cfn-waf-sizeconstraintset-sizeconstraint-fieldtomatch-data PrimitiveType: String UpdateType: Mutable .PARAMETER Type The part of the web request that you want AWS WAF to search for a specified string. Parts of a request that you can search include the following: + HEADER: A specified request header, for example, the value of the User-Agent or Referer header. If you choose HEADER for the type, specify the name of the header in Data. + METHOD: The HTTP method, which indicated the type of operation that the request is asking the origin to perform. Amazon CloudFront supports the following methods: DELETE, GET, HEAD, OPTIONS, PATCH, POST, and PUT. + QUERY_STRING: A query string, which is the part of a URL that appears after a ? character, if any. + URI: The part of a web request that identifies a resource, for example, /images/daily-ad.jpg. + BODY: The part of a request that contains any additional data that you want to send to your web server as the HTTP request body, such as data from a form. The request body immediately follows the request headers. Note that only the first 8192 bytes of the request body are forwarded to AWS WAF for inspection. To allow or block requests based on the length of the body, you can create a size constraint set. + SINGLE_QUERY_ARG: The parameter in the query string that you will inspect, such as *UserName* or *SalesRegion*. The maximum length for SINGLE_QUERY_ARG is 30 characters. + ALL_QUERY_ARGS: Similar to SINGLE_QUERY_ARG, but rather than inspecting a single parameter, AWS WAF will inspect all parameters within the query for the value or regex pattern that you specify in TargetString. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-waf-bytematchset-bytematchtuples-fieldtomatch.html#cfn-waf-sizeconstraintset-sizeconstraint-fieldtomatch-type PrimitiveType: String UpdateType: Mutable .FUNCTIONALITY Vaporshell #> [OutputType([WAFSqlInjectionMatchSetFieldToMatch])] [cmdletbinding()] Param( [parameter(Mandatory = $false)] [object] $Data, [parameter(Mandatory = $true)] [object] $Type ) Process { $obj = [WAFSqlInjectionMatchSetFieldToMatch]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSWAFSqlInjectionMatchSetFieldToMatch' function Add-VSWAFSqlInjectionMatchSetSqlInjectionMatchTuple { <# .SYNOPSIS Adds an AWS::WAF::SqlInjectionMatchSet.SqlInjectionMatchTuple resource property to the template. **Note** .DESCRIPTION Adds an AWS::WAF::SqlInjectionMatchSet.SqlInjectionMatchTuple resource property to the template. **Note** This is **AWS WAF Classic** documentation. For more information, see AWS WAF Classic: https://docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html in the developer guide. **For the latest version of AWS WAF**, use the AWS WAFV2 API and see the AWS WAF Developer Guide: https://docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Specifies the part of a web request that you want AWS WAF to inspect for snippets of malicious SQL code and, if you want AWS WAF to inspect a header, the name of the header. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-waf-sqlinjectionmatchset-sqlinjectionmatchtuples.html .PARAMETER FieldToMatch Specifies where in a web request to look for snippets of malicious SQL code. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-waf-sqlinjectionmatchset-sqlinjectionmatchtuples.html#cfn-waf-sqlinjectionmatchset-sqlinjectionmatchtuples-fieldtomatch Type: FieldToMatch UpdateType: Mutable .PARAMETER TextTransformation Text transformations eliminate some of the unusual formatting that attackers use in web requests in an effort to bypass AWS WAF. If you specify a transformation, AWS WAF performs the transformation on FieldToMatch before inspecting it for a match. You can only specify a single type of TextTransformation. **CMD_LINE** When you're concerned that attackers are injecting an operating system command line command and using unusual formatting to disguise some or all of the command, use this option to perform the following transformations: + Delete the following characters: " ' ^ + Delete spaces before the following characters: / + Replace the following characters with a space: , ; + Replace multiple spaces with one space + Convert uppercase letters A-Z to lowercase a-z **COMPRESS_WHITE_SPACE** Use this option to replace the following characters with a space character decimal 32: + f, formfeed, decimal 12 + t, tab, decimal 9 + n, newline, decimal 10 + r, carriage return, decimal 13 + v, vertical tab, decimal 11 + non-breaking space, decimal 160 COMPRESS_WHITE_SPACE also replaces multiple spaces with one space. **HTML_ENTITY_DECODE** Use this option to replace HTML-encoded characters with unencoded characters. HTML_ENTITY_DECODE performs the following operations: + Replaces ampersandquot; with " + Replaces ampersandnbsp; with a non-breaking space, decimal 160 + Replaces ampersandlt; with a "less than" symbol + Replaces ampersandgt; with > + Replaces characters that are represented in hexadecimal format, ampersand#xhhhh;, with the corresponding characters + Replaces characters that are represented in decimal format, ampersand#nnnn;, with the corresponding characters **LOWERCASE** Use this option to convert uppercase letters A-Z to lowercase a-z. **URL_DECODE** Use this option to decode a URL-encoded value. **NONE** Specify NONE if you don't want to perform any text transformations. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-waf-sqlinjectionmatchset-sqlinjectionmatchtuples.html#cfn-waf-sqlinjectionmatchset-sqlinjectionmatchtuples-texttransformation PrimitiveType: String UpdateType: Mutable .FUNCTIONALITY Vaporshell #> [OutputType([WAFSqlInjectionMatchSetSqlInjectionMatchTuple])] [cmdletbinding()] Param( [parameter(Mandatory = $true)] $FieldToMatch, [parameter(Mandatory = $true)] [object] $TextTransformation ) Process { $obj = [WAFSqlInjectionMatchSetSqlInjectionMatchTuple]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSWAFSqlInjectionMatchSetSqlInjectionMatchTuple' function Add-VSWAFWebACLActivatedRule { <# .SYNOPSIS Adds an AWS::WAF::WebACL.ActivatedRule resource property to the template. The ActivatedRule object in an UpdateWebACL request specifies a Rule that you want to insert or delete, the priority of the Rule in the WebACL, and the action that you want AWS WAF to take when a web request matches the Rule (ALLOW, BLOCK, or COUNT. .DESCRIPTION Adds an AWS::WAF::WebACL.ActivatedRule resource property to the template. The ActivatedRule object in an UpdateWebACL request specifies a Rule that you want to insert or delete, the priority of the Rule in the WebACL, and the action that you want AWS WAF to take when a web request matches the Rule (ALLOW, BLOCK, or COUNT. To specify whether to insert or delete a Rule, use the Action parameter in the WebACLUpdate data type. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-waf-webacl-rules.html .PARAMETER Action Specifies the action that CloudFront or AWS WAF takes when a web request matches the conditions in the Rule. Valid values for Action include the following: + ALLOW: CloudFront responds with the requested object. + BLOCK: CloudFront responds with an HTTP 403 Forbidden status code. + COUNT: AWS WAF increments a counter of requests that match the conditions in the rule and then continues to inspect the web request based on the remaining rules in the web ACL. ActivatedRule|OverrideAction applies only when updating or adding a RuleGroup to a WebACL. In this case, you do not use ActivatedRule|Action. For all other update requests, ActivatedRule|Action is used instead of ActivatedRule|OverrideAction. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-waf-webacl-rules.html#cfn-waf-webacl-rules-action Type: WafAction UpdateType: Mutable .PARAMETER Priority Specifies the order in which the Rules in a WebACL are evaluated. Rules with a lower value for Priority are evaluated before Rules with a higher value. The value must be a unique integer. If you add multiple Rules to a WebACL, the values don't need to be consecutive. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-waf-webacl-rules.html#cfn-waf-webacl-rules-priority PrimitiveType: Integer UpdateType: Mutable .PARAMETER RuleId The RuleId for a Rule. You use RuleId to get more information about a Rule, update a Rule, insert a Rule into a WebACL or delete a one from a WebACL, or delete a Rule from AWS WAF. RuleId is returned by CreateRule and by ListRules. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-waf-webacl-rules.html#cfn-waf-webacl-rules-ruleid PrimitiveType: String UpdateType: Mutable .FUNCTIONALITY Vaporshell #> [OutputType([WAFWebACLActivatedRule])] [cmdletbinding()] Param( [parameter(Mandatory = $false)] $Action, [parameter(Mandatory = $true)] [object] $Priority, [parameter(Mandatory = $true)] [object] $RuleId ) Process { $obj = [WAFWebACLActivatedRule]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSWAFWebACLActivatedRule' function Add-VSWAFWebACLWafAction { <# .SYNOPSIS Adds an AWS::WAF::WebACL.WafAction resource property to the template. **Note** .DESCRIPTION Adds an AWS::WAF::WebACL.WafAction resource property to the template. **Note** This is **AWS WAF Classic** documentation. For more information, see AWS WAF Classic: https://docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html in the developer guide. **For the latest version of AWS WAF**, use the AWS WAFV2 API and see the AWS WAF Developer Guide: https://docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html. With the latest version, AWS WAF has a single set of endpoints for regional and global use. For the action that is associated with a rule in a WebACL, specifies the action that you want AWS WAF to perform when a web request matches all of the conditions in a rule. For the default action in a WebACL, specifies the action that you want AWS WAF to take when a web request doesn't match all of the conditions in any of the rules in a WebACL. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-waf-webacl-action.html .PARAMETER Type Specifies how you want AWS WAF to respond to requests that match the settings in a Rule. Valid settings include the following: + ALLOW: AWS WAF allows requests + BLOCK: AWS WAF blocks requests + COUNT: AWS WAF increments a counter of the requests that match all of the conditions in the rule. AWS WAF then continues to inspect the web request based on the remaining rules in the web ACL. You can't specify COUNT for the default action for a WebACL. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-waf-webacl-action.html#cfn-waf-webacl-action-type PrimitiveType: String UpdateType: Mutable .FUNCTIONALITY Vaporshell #> [OutputType([WAFWebACLWafAction])] [cmdletbinding()] Param( [parameter(Mandatory = $true)] [object] $Type ) Process { $obj = [WAFWebACLWafAction]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSWAFWebACLWafAction' function Add-VSWAFXssMatchSetFieldToMatch { <# .SYNOPSIS Adds an AWS::WAF::XssMatchSet.FieldToMatch resource property to the template. Specifies the part of a web request that you want AWS WAF to search, such as a specific header or a query string. .DESCRIPTION Adds an AWS::WAF::XssMatchSet.FieldToMatch resource property to the template. Specifies the part of a web request that you want AWS WAF to search, such as a specific header or a query string. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-waf-xssmatchset-xssmatchtuple-fieldtomatch.html .PARAMETER Data When the value of Type is HEADER, enter the name of the header that you want AWS WAF to search, for example, User-Agent or Referer. The name of the header is not case sensitive. When the value of Type is SINGLE_QUERY_ARG, enter the name of the parameter that you want AWS WAF to search, for example, UserName or SalesRegion. The parameter name is not case sensitive. If the value of Type is any other value, omit Data. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-waf-xssmatchset-xssmatchtuple-fieldtomatch.html#cfn-waf-xssmatchset-xssmatchtuple-fieldtomatch-data PrimitiveType: String UpdateType: Mutable .PARAMETER Type The part of the web request that you want AWS WAF to search for a specified string. Parts of a request that you can search include the following: + HEADER: A specified request header, for example, the value of the User-Agent or Referer header. If you choose HEADER for the type, specify the name of the header in Data. + METHOD: The HTTP method, which indicated the type of operation that the request is asking the origin to perform. Amazon CloudFront supports the following methods: DELETE, GET, HEAD, OPTIONS, PATCH, POST, and PUT. + QUERY_STRING: A query string, which is the part of a URL that appears after a ? character, if any. + URI: The part of a web request that identifies a resource, for example, /images/daily-ad.jpg. + BODY: The part of a request that contains any additional data that you want to send to your web server as the HTTP request body, such as data from a form. The request body immediately follows the request headers. Note that only the first 8192 bytes of the request body are forwarded to AWS WAF for inspection. To allow or block requests based on the length of the body, you can create a size constraint set. + SINGLE_QUERY_ARG: The parameter in the query string that you will inspect, such as *UserName* or *SalesRegion*. The maximum length for SINGLE_QUERY_ARG is 30 characters. + ALL_QUERY_ARGS: Similar to SINGLE_QUERY_ARG, but rather than inspecting a single parameter, AWS WAF will inspect all parameters within the query for the value or regex pattern that you specify in TargetString. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-waf-xssmatchset-xssmatchtuple-fieldtomatch.html#cfn-waf-xssmatchset-xssmatchtuple-fieldtomatch-type PrimitiveType: String UpdateType: Mutable .FUNCTIONALITY Vaporshell #> [OutputType([WAFXssMatchSetFieldToMatch])] [cmdletbinding()] Param( [parameter(Mandatory = $false)] [object] $Data, [parameter(Mandatory = $true)] [object] $Type ) Process { $obj = [WAFXssMatchSetFieldToMatch]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSWAFXssMatchSetFieldToMatch' function Add-VSWAFXssMatchSetXssMatchTuple { <# .SYNOPSIS Adds an AWS::WAF::XssMatchSet.XssMatchTuple resource property to the template. **Note** .DESCRIPTION Adds an AWS::WAF::XssMatchSet.XssMatchTuple resource property to the template. **Note** This is **AWS WAF Classic** documentation. For more information, see AWS WAF Classic: https://docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html in the developer guide. **For the latest version of AWS WAF**, use the AWS WAFV2 API and see the AWS WAF Developer Guide: https://docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Specifies the part of a web request that you want AWS WAF to inspect for cross-site scripting attacks and, if you want AWS WAF to inspect a header, the name of the header. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-waf-xssmatchset-xssmatchtuple.html .PARAMETER FieldToMatch Specifies where in a web request to look for cross-site scripting attacks. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-waf-xssmatchset-xssmatchtuple.html#cfn-waf-xssmatchset-xssmatchtuple-fieldtomatch Type: FieldToMatch UpdateType: Mutable .PARAMETER TextTransformation Text transformations eliminate some of the unusual formatting that attackers use in web requests in an effort to bypass AWS WAF. If you specify a transformation, AWS WAF performs the transformation on FieldToMatch before inspecting it for a match. You can only specify a single type of TextTransformation. **CMD_LINE** When you're concerned that attackers are injecting an operating system command line command and using unusual formatting to disguise some or all of the command, use this option to perform the following transformations: + Delete the following characters: " ' ^ + Delete spaces before the following characters: / + Replace the following characters with a space: , ; + Replace multiple spaces with one space + Convert uppercase letters A-Z to lowercase a-z **COMPRESS_WHITE_SPACE** Use this option to replace the following characters with a space character decimal 32: + f, formfeed, decimal 12 + t, tab, decimal 9 + n, newline, decimal 10 + r, carriage return, decimal 13 + v, vertical tab, decimal 11 + non-breaking space, decimal 160 COMPRESS_WHITE_SPACE also replaces multiple spaces with one space. **HTML_ENTITY_DECODE** Use this option to replace HTML-encoded characters with unencoded characters. HTML_ENTITY_DECODE performs the following operations: + Replaces ampersandquot; with " + Replaces ampersandnbsp; with a non-breaking space, decimal 160 + Replaces ampersandlt; with a "less than" symbol + Replaces ampersandgt; with > + Replaces characters that are represented in hexadecimal format, ampersand#xhhhh;, with the corresponding characters + Replaces characters that are represented in decimal format, ampersand#nnnn;, with the corresponding characters **LOWERCASE** Use this option to convert uppercase letters A-Z to lowercase a-z. **URL_DECODE** Use this option to decode a URL-encoded value. **NONE** Specify NONE if you don't want to perform any text transformations. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-waf-xssmatchset-xssmatchtuple.html#cfn-waf-xssmatchset-xssmatchtuple-texttransformation PrimitiveType: String UpdateType: Mutable .FUNCTIONALITY Vaporshell #> [OutputType([WAFXssMatchSetXssMatchTuple])] [cmdletbinding()] Param( [parameter(Mandatory = $true)] $FieldToMatch, [parameter(Mandatory = $true)] [object] $TextTransformation ) Process { $obj = [WAFXssMatchSetXssMatchTuple]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSWAFXssMatchSetXssMatchTuple' function New-VSWAFByteMatchSet { <# .SYNOPSIS Adds an AWS::WAF::ByteMatchSet resource to the template. The AWS::WAF::ByteMatchSet resource creates an AWS WAF ByteMatchSet that identifies a part of a web request that you want to inspect. .DESCRIPTION Adds an AWS::WAF::ByteMatchSet resource to the template. The AWS::WAF::ByteMatchSet resource creates an AWS WAF ByteMatchSet that identifies a part of a web request that you want to inspect. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-waf-bytematchset.html .PARAMETER LogicalId The logical ID must be alphanumeric (A-Za-z0-9) and unique within the template. Use the logical name to reference the resource in other parts of the template. For example, if you want to map an Amazon Elastic Block Store volume to an Amazon EC2 instance, you reference the logical IDs to associate the block stores with the instance. .PARAMETER ByteMatchTuples Specifies the bytes typically a string that corresponds with ASCII characters that you want AWS WAF to search for in web requests, the location in requests that you want AWS WAF to search, and other settings. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-waf-bytematchset.html#cfn-waf-bytematchset-bytematchtuples DuplicatesAllowed: False ItemType: ByteMatchTuple Type: List UpdateType: Mutable .PARAMETER Name A friendly name or description of the ByteMatchSet. You can't change Name after you create a ByteMatchSet. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-waf-bytematchset.html#cfn-waf-bytematchset-name PrimitiveType: String UpdateType: Immutable .PARAMETER DeletionPolicy With the DeletionPolicy attribute you can preserve or (in some cases) backup a resource when its stack is deleted. You specify a DeletionPolicy attribute for each resource that you want to control. If a resource has no DeletionPolicy attribute, AWS CloudFormation deletes the resource by default. To keep a resource when its stack is deleted, specify Retain for that resource. You can use retain for any resource. For example, you can retain a nested stack, S3 bucket, or EC2 instance so that you can continue to use or modify those resources after you delete their stacks. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER UpdateReplacePolicy Use the UpdateReplacePolicy attribute to retain or (in some cases) backup the existing physical instance of a resource when it is replaced during a stack update operation. When you initiate a stack update, AWS CloudFormation updates resources based on differences between what you submit and the stack's current template and parameters. If you update a resource property that requires that the resource be replaced, AWS CloudFormation recreates the resource during the update. Recreating the resource generates a new physical ID. AWS CloudFormation creates the replacement resource first, and then changes references from other dependent resources to point to the replacement resource. By default, AWS CloudFormation then deletes the old resource. Using the UpdateReplacePolicy, you can specify that AWS CloudFormation retain or (in some cases) create a snapshot of the old resource. For resources that support snapshots, such as AWS::EC2::Volume, specify Snapshot to have AWS CloudFormation create a snapshot before deleting the old resource instance. You can apply the UpdateReplacePolicy attribute to any resource. UpdateReplacePolicy is only executed if you update a resource property whose update behavior is specified as Replacement, thereby causing AWS CloudFormation to replace the old resource with a new one with a new physical ID. For example, if you update the Engine property of an AWS::RDS::DBInstance resource type, AWS CloudFormation creates a new resource and replaces the current DB instance resource with the new one. The UpdateReplacePolicy attribute would then dictate whether AWS CloudFormation deleted, retained, or created a snapshot of the old DB instance. The update behavior for each property of a resource is specified in the reference topic for that resource in the AWS Resource and Property Types Reference. For more information on resource update behavior, see Update Behaviors of Stack Resources. The UpdateReplacePolicy attribute applies to stack updates you perform directly, as well as stack updates performed using change sets. Note Resources that are retained continue to exist and continue to incur applicable charges until you delete those resources. Snapshots that are created with this policy continue to exist and continue to incur applicable charges until you delete those snapshots. UpdateReplacePolicy retains the old physical resource or snapshot, but removes it from AWS CloudFormation's scope. UpdateReplacePolicy differs from the DeletionPolicy attribute in that it only applies to resources replaced during stack updates. Use DeletionPolicy for resources deleted when a stack is deleted, or when the resource definition itself is deleted from the template as part of a stack update. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER DependsOn With the DependsOn attribute you can specify that the creation of a specific resource follows another. When you add a DependsOn attribute to a resource, that resource is created only after the creation of the resource specified in the DependsOn attribute. This parameter takes a string or list of strings representing Logical IDs of resources that must be created prior to this resource being created. .PARAMETER Metadata The Metadata attribute enables you to associate structured data with a resource. By adding a Metadata attribute to a resource, you can add data in JSON or YAML to the resource declaration. In addition, you can use intrinsic functions (such as GetAtt and Ref), parameters, and pseudo parameters within the Metadata attribute to add those interpreted values. This will be returned when describing the resource using AWS CLI. .PARAMETER UpdatePolicy Use the UpdatePolicy attribute to specify how AWS CloudFormation handles updates to the AWS::AutoScaling::AutoScalingGroup resource. AWS CloudFormation invokes one of three update policies depending on the type of change you make or whether a scheduled action is associated with the Auto Scaling group. You must use the "Add-UpdatePolicy" function or the [UpdatePolicy] class here. .PARAMETER Condition Logical ID of the condition that this resource needs to be true in order for this resource to be provisioned. .FUNCTIONALITY Vaporshell #> [OutputType([WAFByteMatchSet])] [cmdletbinding()] Param( [parameter(Mandatory = $true,Position = 0)] [ValidateLogicalId()] [string] $LogicalId, [parameter(Mandatory = $false)] [object] $ByteMatchTuples, [parameter(Mandatory = $true)] [object] $Name, [parameter()] [DeletionPolicy] $DeletionPolicy, [parameter()] [UpdateReplacePolicy] $UpdateReplacePolicy, [parameter(Mandatory = $false)] [string[]] $DependsOn, [parameter(Mandatory = $false)] [VSJson] $Metadata, [parameter(Mandatory = $false)] [UpdatePolicy] $UpdatePolicy, [parameter(Mandatory = $false)] [string] $Condition ) Process { $obj = [WAFByteMatchSet]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'New-VSWAFByteMatchSet' function New-VSWAFIPSet { <# .SYNOPSIS Adds an AWS::WAF::IPSet resource to the template. **Note** .DESCRIPTION Adds an AWS::WAF::IPSet resource to the template. **Note** This is **AWS WAF Classic** documentation. For more information, see AWS WAF Classic: https://docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html in the developer guide. **For the latest version of AWS WAF**, use the AWS WAFV2 API and see the AWS WAF Developer Guide: https://docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Contains one or more IP addresses or blocks of IP addresses specified in Classless Inter-Domain Routing (CIDR notation. AWS WAF supports IPv4 address ranges: /8 and any range between /16 through /32. AWS WAF supports IPv6 address ranges: /24, /32, /48, /56, /64, and /128. To specify an individual IP address, you specify the four-part IP address followed by a /32, for example, 192.0.2.0/32. To block a range of IP addresses, you can specify /8 or any range between /16 through /32 (for IPv4 or /24, /32, /48, /56, /64, or /128 (for IPv6. For more information about CIDR notation, see the Wikipedia entry Classless Inter-Domain Routing: https://en.wikipedia.org/wiki/Classless_Inter-Domain_Routing. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-waf-ipset.html .PARAMETER LogicalId The logical ID must be alphanumeric (A-Za-z0-9) and unique within the template. Use the logical name to reference the resource in other parts of the template. For example, if you want to map an Amazon Elastic Block Store volume to an Amazon EC2 instance, you reference the logical IDs to associate the block stores with the instance. .PARAMETER IPSetDescriptors The IP address type IPV4 or IPV6 and the IP address range in CIDR notation that web requests originate from. If the WebACL is associated with a CloudFront distribution and the viewer did not use an HTTP proxy or a load balancer to send the request, this is the value of the c-ip field in the CloudFront access logs. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-waf-ipset.html#cfn-waf-ipset-ipsetdescriptors DuplicatesAllowed: False ItemType: IPSetDescriptor Type: List UpdateType: Mutable .PARAMETER Name A friendly name or description of the IPSet. You can't change the name of an IPSet after you create it. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-waf-ipset.html#cfn-waf-ipset-name PrimitiveType: String UpdateType: Immutable .PARAMETER DeletionPolicy With the DeletionPolicy attribute you can preserve or (in some cases) backup a resource when its stack is deleted. You specify a DeletionPolicy attribute for each resource that you want to control. If a resource has no DeletionPolicy attribute, AWS CloudFormation deletes the resource by default. To keep a resource when its stack is deleted, specify Retain for that resource. You can use retain for any resource. For example, you can retain a nested stack, S3 bucket, or EC2 instance so that you can continue to use or modify those resources after you delete their stacks. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER UpdateReplacePolicy Use the UpdateReplacePolicy attribute to retain or (in some cases) backup the existing physical instance of a resource when it is replaced during a stack update operation. When you initiate a stack update, AWS CloudFormation updates resources based on differences between what you submit and the stack's current template and parameters. If you update a resource property that requires that the resource be replaced, AWS CloudFormation recreates the resource during the update. Recreating the resource generates a new physical ID. AWS CloudFormation creates the replacement resource first, and then changes references from other dependent resources to point to the replacement resource. By default, AWS CloudFormation then deletes the old resource. Using the UpdateReplacePolicy, you can specify that AWS CloudFormation retain or (in some cases) create a snapshot of the old resource. For resources that support snapshots, such as AWS::EC2::Volume, specify Snapshot to have AWS CloudFormation create a snapshot before deleting the old resource instance. You can apply the UpdateReplacePolicy attribute to any resource. UpdateReplacePolicy is only executed if you update a resource property whose update behavior is specified as Replacement, thereby causing AWS CloudFormation to replace the old resource with a new one with a new physical ID. For example, if you update the Engine property of an AWS::RDS::DBInstance resource type, AWS CloudFormation creates a new resource and replaces the current DB instance resource with the new one. The UpdateReplacePolicy attribute would then dictate whether AWS CloudFormation deleted, retained, or created a snapshot of the old DB instance. The update behavior for each property of a resource is specified in the reference topic for that resource in the AWS Resource and Property Types Reference. For more information on resource update behavior, see Update Behaviors of Stack Resources. The UpdateReplacePolicy attribute applies to stack updates you perform directly, as well as stack updates performed using change sets. Note Resources that are retained continue to exist and continue to incur applicable charges until you delete those resources. Snapshots that are created with this policy continue to exist and continue to incur applicable charges until you delete those snapshots. UpdateReplacePolicy retains the old physical resource or snapshot, but removes it from AWS CloudFormation's scope. UpdateReplacePolicy differs from the DeletionPolicy attribute in that it only applies to resources replaced during stack updates. Use DeletionPolicy for resources deleted when a stack is deleted, or when the resource definition itself is deleted from the template as part of a stack update. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER DependsOn With the DependsOn attribute you can specify that the creation of a specific resource follows another. When you add a DependsOn attribute to a resource, that resource is created only after the creation of the resource specified in the DependsOn attribute. This parameter takes a string or list of strings representing Logical IDs of resources that must be created prior to this resource being created. .PARAMETER Metadata The Metadata attribute enables you to associate structured data with a resource. By adding a Metadata attribute to a resource, you can add data in JSON or YAML to the resource declaration. In addition, you can use intrinsic functions (such as GetAtt and Ref), parameters, and pseudo parameters within the Metadata attribute to add those interpreted values. This will be returned when describing the resource using AWS CLI. .PARAMETER UpdatePolicy Use the UpdatePolicy attribute to specify how AWS CloudFormation handles updates to the AWS::AutoScaling::AutoScalingGroup resource. AWS CloudFormation invokes one of three update policies depending on the type of change you make or whether a scheduled action is associated with the Auto Scaling group. You must use the "Add-UpdatePolicy" function or the [UpdatePolicy] class here. .PARAMETER Condition Logical ID of the condition that this resource needs to be true in order for this resource to be provisioned. .FUNCTIONALITY Vaporshell #> [OutputType([WAFIPSet])] [cmdletbinding()] Param( [parameter(Mandatory = $true,Position = 0)] [ValidateLogicalId()] [string] $LogicalId, [parameter(Mandatory = $false)] [object] $IPSetDescriptors, [parameter(Mandatory = $true)] [object] $Name, [parameter()] [DeletionPolicy] $DeletionPolicy, [parameter()] [UpdateReplacePolicy] $UpdateReplacePolicy, [parameter(Mandatory = $false)] [string[]] $DependsOn, [parameter(Mandatory = $false)] [VSJson] $Metadata, [parameter(Mandatory = $false)] [UpdatePolicy] $UpdatePolicy, [parameter(Mandatory = $false)] [string] $Condition ) Process { $obj = [WAFIPSet]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'New-VSWAFIPSet' function New-VSWAFRule { <# .SYNOPSIS Adds an AWS::WAF::Rule resource to the template. A combination of ByteMatchSet, IPSet, and/or SqlInjectionMatchSet objects that identify the web requests that you want to allow, block, or count. For example, you might create a Rule that includes the following predicates: .DESCRIPTION Adds an AWS::WAF::Rule resource to the template. A combination of ByteMatchSet, IPSet, and/or SqlInjectionMatchSet objects that identify the web requests that you want to allow, block, or count. For example, you might create a Rule that includes the following predicates: + An IPSet that causes AWS WAF to search for web requests that originate from the IP address 192.0.2.44 + A ByteMatchSet that causes AWS WAF to search for web requests for which the value of the User-Agent header is BadBot. To match the settings in this Rule, a request must originate from 192.0.2.44 AND include a User-Agent header for which the value is BadBot. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-waf-rule.html .PARAMETER LogicalId The logical ID must be alphanumeric (A-Za-z0-9) and unique within the template. Use the logical name to reference the resource in other parts of the template. For example, if you want to map an Amazon Elastic Block Store volume to an Amazon EC2 instance, you reference the logical IDs to associate the block stores with the instance. .PARAMETER MetricName A friendly name or description for the metrics for this Rule. The name can contain only alphanumeric characters A-Z, a-z, 0-9, with maximum length 128 and minimum length one. It can't contain whitespace or metric names reserved for AWS WAF, including "All" and "Default_Action." You can't change MetricName after you create the Rule. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-waf-rule.html#cfn-waf-rule-metricname PrimitiveType: String UpdateType: Immutable .PARAMETER Name The friendly name or description for the Rule. You can't change the name of a Rule after you create it. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-waf-rule.html#cfn-waf-rule-name PrimitiveType: String UpdateType: Immutable .PARAMETER Predicates The Predicates object contains one Predicate element for each ByteMatchSet, IPSet, or SqlInjectionMatchSet object that you want to include in a Rule. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-waf-rule.html#cfn-waf-rule-predicates DuplicatesAllowed: False ItemType: Predicate Type: List UpdateType: Mutable .PARAMETER DeletionPolicy With the DeletionPolicy attribute you can preserve or (in some cases) backup a resource when its stack is deleted. You specify a DeletionPolicy attribute for each resource that you want to control. If a resource has no DeletionPolicy attribute, AWS CloudFormation deletes the resource by default. To keep a resource when its stack is deleted, specify Retain for that resource. You can use retain for any resource. For example, you can retain a nested stack, S3 bucket, or EC2 instance so that you can continue to use or modify those resources after you delete their stacks. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER UpdateReplacePolicy Use the UpdateReplacePolicy attribute to retain or (in some cases) backup the existing physical instance of a resource when it is replaced during a stack update operation. When you initiate a stack update, AWS CloudFormation updates resources based on differences between what you submit and the stack's current template and parameters. If you update a resource property that requires that the resource be replaced, AWS CloudFormation recreates the resource during the update. Recreating the resource generates a new physical ID. AWS CloudFormation creates the replacement resource first, and then changes references from other dependent resources to point to the replacement resource. By default, AWS CloudFormation then deletes the old resource. Using the UpdateReplacePolicy, you can specify that AWS CloudFormation retain or (in some cases) create a snapshot of the old resource. For resources that support snapshots, such as AWS::EC2::Volume, specify Snapshot to have AWS CloudFormation create a snapshot before deleting the old resource instance. You can apply the UpdateReplacePolicy attribute to any resource. UpdateReplacePolicy is only executed if you update a resource property whose update behavior is specified as Replacement, thereby causing AWS CloudFormation to replace the old resource with a new one with a new physical ID. For example, if you update the Engine property of an AWS::RDS::DBInstance resource type, AWS CloudFormation creates a new resource and replaces the current DB instance resource with the new one. The UpdateReplacePolicy attribute would then dictate whether AWS CloudFormation deleted, retained, or created a snapshot of the old DB instance. The update behavior for each property of a resource is specified in the reference topic for that resource in the AWS Resource and Property Types Reference. For more information on resource update behavior, see Update Behaviors of Stack Resources. The UpdateReplacePolicy attribute applies to stack updates you perform directly, as well as stack updates performed using change sets. Note Resources that are retained continue to exist and continue to incur applicable charges until you delete those resources. Snapshots that are created with this policy continue to exist and continue to incur applicable charges until you delete those snapshots. UpdateReplacePolicy retains the old physical resource or snapshot, but removes it from AWS CloudFormation's scope. UpdateReplacePolicy differs from the DeletionPolicy attribute in that it only applies to resources replaced during stack updates. Use DeletionPolicy for resources deleted when a stack is deleted, or when the resource definition itself is deleted from the template as part of a stack update. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER DependsOn With the DependsOn attribute you can specify that the creation of a specific resource follows another. When you add a DependsOn attribute to a resource, that resource is created only after the creation of the resource specified in the DependsOn attribute. This parameter takes a string or list of strings representing Logical IDs of resources that must be created prior to this resource being created. .PARAMETER Metadata The Metadata attribute enables you to associate structured data with a resource. By adding a Metadata attribute to a resource, you can add data in JSON or YAML to the resource declaration. In addition, you can use intrinsic functions (such as GetAtt and Ref), parameters, and pseudo parameters within the Metadata attribute to add those interpreted values. This will be returned when describing the resource using AWS CLI. .PARAMETER UpdatePolicy Use the UpdatePolicy attribute to specify how AWS CloudFormation handles updates to the AWS::AutoScaling::AutoScalingGroup resource. AWS CloudFormation invokes one of three update policies depending on the type of change you make or whether a scheduled action is associated with the Auto Scaling group. You must use the "Add-UpdatePolicy" function or the [UpdatePolicy] class here. .PARAMETER Condition Logical ID of the condition that this resource needs to be true in order for this resource to be provisioned. .FUNCTIONALITY Vaporshell #> [OutputType([WAFRule])] [cmdletbinding()] Param( [parameter(Mandatory = $true,Position = 0)] [ValidateLogicalId()] [string] $LogicalId, [parameter(Mandatory = $true)] [object] $MetricName, [parameter(Mandatory = $true)] [object] $Name, [parameter(Mandatory = $false)] [object] $Predicates, [parameter()] [DeletionPolicy] $DeletionPolicy, [parameter()] [UpdateReplacePolicy] $UpdateReplacePolicy, [parameter(Mandatory = $false)] [string[]] $DependsOn, [parameter(Mandatory = $false)] [VSJson] $Metadata, [parameter(Mandatory = $false)] [UpdatePolicy] $UpdatePolicy, [parameter(Mandatory = $false)] [string] $Condition ) Process { $obj = [WAFRule]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'New-VSWAFRule' function New-VSWAFSizeConstraintSet { <# .SYNOPSIS Adds an AWS::WAF::SizeConstraintSet resource to the template. **Note** .DESCRIPTION Adds an AWS::WAF::SizeConstraintSet resource to the template. **Note** This is **AWS WAF Classic** documentation. For more information, see AWS WAF Classic: https://docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html in the developer guide. **For the latest version of AWS WAF**, use the AWS WAFV2 API and see the AWS WAF Developer Guide: https://docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html. With the latest version, AWS WAF has a single set of endpoints for regional and global use. A complex type that contains SizeConstraint objects, which specify the parts of web requests that you want AWS WAF to inspect the size of. If a SizeConstraintSet contains more than one SizeConstraint object, a request only needs to match one constraint to be considered a match. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-waf-sizeconstraintset.html .PARAMETER LogicalId The logical ID must be alphanumeric (A-Za-z0-9) and unique within the template. Use the logical name to reference the resource in other parts of the template. For example, if you want to map an Amazon Elastic Block Store volume to an Amazon EC2 instance, you reference the logical IDs to associate the block stores with the instance. .PARAMETER Name The name, if any, of the SizeConstraintSet. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-waf-sizeconstraintset.html#cfn-waf-sizeconstraintset-name PrimitiveType: String UpdateType: Immutable .PARAMETER SizeConstraints The size constraint and the part of the web request to check. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-waf-sizeconstraintset.html#cfn-waf-sizeconstraintset-sizeconstraints DuplicatesAllowed: False ItemType: SizeConstraint Type: List UpdateType: Mutable .PARAMETER DeletionPolicy With the DeletionPolicy attribute you can preserve or (in some cases) backup a resource when its stack is deleted. You specify a DeletionPolicy attribute for each resource that you want to control. If a resource has no DeletionPolicy attribute, AWS CloudFormation deletes the resource by default. To keep a resource when its stack is deleted, specify Retain for that resource. You can use retain for any resource. For example, you can retain a nested stack, S3 bucket, or EC2 instance so that you can continue to use or modify those resources after you delete their stacks. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER UpdateReplacePolicy Use the UpdateReplacePolicy attribute to retain or (in some cases) backup the existing physical instance of a resource when it is replaced during a stack update operation. When you initiate a stack update, AWS CloudFormation updates resources based on differences between what you submit and the stack's current template and parameters. If you update a resource property that requires that the resource be replaced, AWS CloudFormation recreates the resource during the update. Recreating the resource generates a new physical ID. AWS CloudFormation creates the replacement resource first, and then changes references from other dependent resources to point to the replacement resource. By default, AWS CloudFormation then deletes the old resource. Using the UpdateReplacePolicy, you can specify that AWS CloudFormation retain or (in some cases) create a snapshot of the old resource. For resources that support snapshots, such as AWS::EC2::Volume, specify Snapshot to have AWS CloudFormation create a snapshot before deleting the old resource instance. You can apply the UpdateReplacePolicy attribute to any resource. UpdateReplacePolicy is only executed if you update a resource property whose update behavior is specified as Replacement, thereby causing AWS CloudFormation to replace the old resource with a new one with a new physical ID. For example, if you update the Engine property of an AWS::RDS::DBInstance resource type, AWS CloudFormation creates a new resource and replaces the current DB instance resource with the new one. The UpdateReplacePolicy attribute would then dictate whether AWS CloudFormation deleted, retained, or created a snapshot of the old DB instance. The update behavior for each property of a resource is specified in the reference topic for that resource in the AWS Resource and Property Types Reference. For more information on resource update behavior, see Update Behaviors of Stack Resources. The UpdateReplacePolicy attribute applies to stack updates you perform directly, as well as stack updates performed using change sets. Note Resources that are retained continue to exist and continue to incur applicable charges until you delete those resources. Snapshots that are created with this policy continue to exist and continue to incur applicable charges until you delete those snapshots. UpdateReplacePolicy retains the old physical resource or snapshot, but removes it from AWS CloudFormation's scope. UpdateReplacePolicy differs from the DeletionPolicy attribute in that it only applies to resources replaced during stack updates. Use DeletionPolicy for resources deleted when a stack is deleted, or when the resource definition itself is deleted from the template as part of a stack update. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER DependsOn With the DependsOn attribute you can specify that the creation of a specific resource follows another. When you add a DependsOn attribute to a resource, that resource is created only after the creation of the resource specified in the DependsOn attribute. This parameter takes a string or list of strings representing Logical IDs of resources that must be created prior to this resource being created. .PARAMETER Metadata The Metadata attribute enables you to associate structured data with a resource. By adding a Metadata attribute to a resource, you can add data in JSON or YAML to the resource declaration. In addition, you can use intrinsic functions (such as GetAtt and Ref), parameters, and pseudo parameters within the Metadata attribute to add those interpreted values. This will be returned when describing the resource using AWS CLI. .PARAMETER UpdatePolicy Use the UpdatePolicy attribute to specify how AWS CloudFormation handles updates to the AWS::AutoScaling::AutoScalingGroup resource. AWS CloudFormation invokes one of three update policies depending on the type of change you make or whether a scheduled action is associated with the Auto Scaling group. You must use the "Add-UpdatePolicy" function or the [UpdatePolicy] class here. .PARAMETER Condition Logical ID of the condition that this resource needs to be true in order for this resource to be provisioned. .FUNCTIONALITY Vaporshell #> [OutputType([WAFSizeConstraintSet])] [cmdletbinding()] Param( [parameter(Mandatory = $true,Position = 0)] [ValidateLogicalId()] [string] $LogicalId, [parameter(Mandatory = $true)] [object] $Name, [parameter(Mandatory = $true)] [object] $SizeConstraints, [parameter()] [DeletionPolicy] $DeletionPolicy, [parameter()] [UpdateReplacePolicy] $UpdateReplacePolicy, [parameter(Mandatory = $false)] [string[]] $DependsOn, [parameter(Mandatory = $false)] [VSJson] $Metadata, [parameter(Mandatory = $false)] [UpdatePolicy] $UpdatePolicy, [parameter(Mandatory = $false)] [string] $Condition ) Process { $obj = [WAFSizeConstraintSet]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'New-VSWAFSizeConstraintSet' function New-VSWAFSqlInjectionMatchSet { <# .SYNOPSIS Adds an AWS::WAF::SqlInjectionMatchSet resource to the template. **Note** .DESCRIPTION Adds an AWS::WAF::SqlInjectionMatchSet resource to the template. **Note** This is **AWS WAF Classic** documentation. For more information, see AWS WAF Classic: https://docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html in the developer guide. **For the latest version of AWS WAF**, use the AWS WAFV2 API and see the AWS WAF Developer Guide: https://docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html. With the latest version, AWS WAF has a single set of endpoints for regional and global use. A complex type that contains SqlInjectionMatchTuple objects, which specify the parts of web requests that you want AWS WAF to inspect for snippets of malicious SQL code and, if you want AWS WAF to inspect a header, the name of the header. If a SqlInjectionMatchSet contains more than one SqlInjectionMatchTuple object, a request needs to include snippets of SQL code in only one of the specified parts of the request to be considered a match. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-waf-sqlinjectionmatchset.html .PARAMETER LogicalId The logical ID must be alphanumeric (A-Za-z0-9) and unique within the template. Use the logical name to reference the resource in other parts of the template. For example, if you want to map an Amazon Elastic Block Store volume to an Amazon EC2 instance, you reference the logical IDs to associate the block stores with the instance. .PARAMETER Name The name, if any, of the SqlInjectionMatchSet. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-waf-sqlinjectionmatchset.html#cfn-waf-sqlinjectionmatchset-name PrimitiveType: String UpdateType: Immutable .PARAMETER SqlInjectionMatchTuples Specifies the parts of web requests that you want to inspect for snippets of malicious SQL code. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-waf-sqlinjectionmatchset.html#cfn-waf-sqlinjectionmatchset-sqlinjectionmatchtuples DuplicatesAllowed: False ItemType: SqlInjectionMatchTuple Type: List UpdateType: Mutable .PARAMETER DeletionPolicy With the DeletionPolicy attribute you can preserve or (in some cases) backup a resource when its stack is deleted. You specify a DeletionPolicy attribute for each resource that you want to control. If a resource has no DeletionPolicy attribute, AWS CloudFormation deletes the resource by default. To keep a resource when its stack is deleted, specify Retain for that resource. You can use retain for any resource. For example, you can retain a nested stack, S3 bucket, or EC2 instance so that you can continue to use or modify those resources after you delete their stacks. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER UpdateReplacePolicy Use the UpdateReplacePolicy attribute to retain or (in some cases) backup the existing physical instance of a resource when it is replaced during a stack update operation. When you initiate a stack update, AWS CloudFormation updates resources based on differences between what you submit and the stack's current template and parameters. If you update a resource property that requires that the resource be replaced, AWS CloudFormation recreates the resource during the update. Recreating the resource generates a new physical ID. AWS CloudFormation creates the replacement resource first, and then changes references from other dependent resources to point to the replacement resource. By default, AWS CloudFormation then deletes the old resource. Using the UpdateReplacePolicy, you can specify that AWS CloudFormation retain or (in some cases) create a snapshot of the old resource. For resources that support snapshots, such as AWS::EC2::Volume, specify Snapshot to have AWS CloudFormation create a snapshot before deleting the old resource instance. You can apply the UpdateReplacePolicy attribute to any resource. UpdateReplacePolicy is only executed if you update a resource property whose update behavior is specified as Replacement, thereby causing AWS CloudFormation to replace the old resource with a new one with a new physical ID. For example, if you update the Engine property of an AWS::RDS::DBInstance resource type, AWS CloudFormation creates a new resource and replaces the current DB instance resource with the new one. The UpdateReplacePolicy attribute would then dictate whether AWS CloudFormation deleted, retained, or created a snapshot of the old DB instance. The update behavior for each property of a resource is specified in the reference topic for that resource in the AWS Resource and Property Types Reference. For more information on resource update behavior, see Update Behaviors of Stack Resources. The UpdateReplacePolicy attribute applies to stack updates you perform directly, as well as stack updates performed using change sets. Note Resources that are retained continue to exist and continue to incur applicable charges until you delete those resources. Snapshots that are created with this policy continue to exist and continue to incur applicable charges until you delete those snapshots. UpdateReplacePolicy retains the old physical resource or snapshot, but removes it from AWS CloudFormation's scope. UpdateReplacePolicy differs from the DeletionPolicy attribute in that it only applies to resources replaced during stack updates. Use DeletionPolicy for resources deleted when a stack is deleted, or when the resource definition itself is deleted from the template as part of a stack update. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER DependsOn With the DependsOn attribute you can specify that the creation of a specific resource follows another. When you add a DependsOn attribute to a resource, that resource is created only after the creation of the resource specified in the DependsOn attribute. This parameter takes a string or list of strings representing Logical IDs of resources that must be created prior to this resource being created. .PARAMETER Metadata The Metadata attribute enables you to associate structured data with a resource. By adding a Metadata attribute to a resource, you can add data in JSON or YAML to the resource declaration. In addition, you can use intrinsic functions (such as GetAtt and Ref), parameters, and pseudo parameters within the Metadata attribute to add those interpreted values. This will be returned when describing the resource using AWS CLI. .PARAMETER UpdatePolicy Use the UpdatePolicy attribute to specify how AWS CloudFormation handles updates to the AWS::AutoScaling::AutoScalingGroup resource. AWS CloudFormation invokes one of three update policies depending on the type of change you make or whether a scheduled action is associated with the Auto Scaling group. You must use the "Add-UpdatePolicy" function or the [UpdatePolicy] class here. .PARAMETER Condition Logical ID of the condition that this resource needs to be true in order for this resource to be provisioned. .FUNCTIONALITY Vaporshell #> [OutputType([WAFSqlInjectionMatchSet])] [cmdletbinding()] Param( [parameter(Mandatory = $true,Position = 0)] [ValidateLogicalId()] [string] $LogicalId, [parameter(Mandatory = $true)] [object] $Name, [parameter(Mandatory = $false)] [object] $SqlInjectionMatchTuples, [parameter()] [DeletionPolicy] $DeletionPolicy, [parameter()] [UpdateReplacePolicy] $UpdateReplacePolicy, [parameter(Mandatory = $false)] [string[]] $DependsOn, [parameter(Mandatory = $false)] [VSJson] $Metadata, [parameter(Mandatory = $false)] [UpdatePolicy] $UpdatePolicy, [parameter(Mandatory = $false)] [string] $Condition ) Process { $obj = [WAFSqlInjectionMatchSet]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'New-VSWAFSqlInjectionMatchSet' function New-VSWAFWebACL { <# .SYNOPSIS Adds an AWS::WAF::WebACL resource to the template. Contains the Rules that identify the requests that you want to allow, block, or count. In a WebACL, you also specify a default action (ALLOW or BLOCK, and the action for each Rule that you add to a WebACL, for example, block requests from specified IP addresses or block requests from specified referrers. You also associate the WebACL with a CloudFront distribution to identify the requests that you want AWS WAF to filter. If you add more than one Rule to a WebACL, a request needs to match only one of the specifications to be allowed, blocked, or counted. .DESCRIPTION Adds an AWS::WAF::WebACL resource to the template. Contains the Rules that identify the requests that you want to allow, block, or count. In a WebACL, you also specify a default action (ALLOW or BLOCK, and the action for each Rule that you add to a WebACL, for example, block requests from specified IP addresses or block requests from specified referrers. You also associate the WebACL with a CloudFront distribution to identify the requests that you want AWS WAF to filter. If you add more than one Rule to a WebACL, a request needs to match only one of the specifications to be allowed, blocked, or counted. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-waf-webacl.html .PARAMETER LogicalId The logical ID must be alphanumeric (A-Za-z0-9) and unique within the template. Use the logical name to reference the resource in other parts of the template. For example, if you want to map an Amazon Elastic Block Store volume to an Amazon EC2 instance, you reference the logical IDs to associate the block stores with the instance. .PARAMETER DefaultAction The action to perform if none of the Rules contained in the WebACL match. The action is specified by the WafAction object. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-waf-webacl.html#cfn-waf-webacl-defaultaction Type: WafAction UpdateType: Mutable .PARAMETER MetricName A friendly name or description for the metrics for this WebACL. The name can contain only alphanumeric characters A-Z, a-z, 0-9, with maximum length 128 and minimum length one. It can't contain whitespace or metric names reserved for AWS WAF, including "All" and "Default_Action." You can't change MetricName after you create the WebACL. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-waf-webacl.html#cfn-waf-webacl-metricname PrimitiveType: String UpdateType: Immutable .PARAMETER Name A friendly name or description of the WebACL. You can't change the name of a WebACL after you create it. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-waf-webacl.html#cfn-waf-webacl-name PrimitiveType: String UpdateType: Immutable .PARAMETER Rules An array that contains the action for each Rule in a WebACL, the priority of the Rule, and the ID of the Rule. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-waf-webacl.html#cfn-waf-webacl-rules DuplicatesAllowed: False ItemType: ActivatedRule Type: List UpdateType: Mutable .PARAMETER DeletionPolicy With the DeletionPolicy attribute you can preserve or (in some cases) backup a resource when its stack is deleted. You specify a DeletionPolicy attribute for each resource that you want to control. If a resource has no DeletionPolicy attribute, AWS CloudFormation deletes the resource by default. To keep a resource when its stack is deleted, specify Retain for that resource. You can use retain for any resource. For example, you can retain a nested stack, S3 bucket, or EC2 instance so that you can continue to use or modify those resources after you delete their stacks. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER UpdateReplacePolicy Use the UpdateReplacePolicy attribute to retain or (in some cases) backup the existing physical instance of a resource when it is replaced during a stack update operation. When you initiate a stack update, AWS CloudFormation updates resources based on differences between what you submit and the stack's current template and parameters. If you update a resource property that requires that the resource be replaced, AWS CloudFormation recreates the resource during the update. Recreating the resource generates a new physical ID. AWS CloudFormation creates the replacement resource first, and then changes references from other dependent resources to point to the replacement resource. By default, AWS CloudFormation then deletes the old resource. Using the UpdateReplacePolicy, you can specify that AWS CloudFormation retain or (in some cases) create a snapshot of the old resource. For resources that support snapshots, such as AWS::EC2::Volume, specify Snapshot to have AWS CloudFormation create a snapshot before deleting the old resource instance. You can apply the UpdateReplacePolicy attribute to any resource. UpdateReplacePolicy is only executed if you update a resource property whose update behavior is specified as Replacement, thereby causing AWS CloudFormation to replace the old resource with a new one with a new physical ID. For example, if you update the Engine property of an AWS::RDS::DBInstance resource type, AWS CloudFormation creates a new resource and replaces the current DB instance resource with the new one. The UpdateReplacePolicy attribute would then dictate whether AWS CloudFormation deleted, retained, or created a snapshot of the old DB instance. The update behavior for each property of a resource is specified in the reference topic for that resource in the AWS Resource and Property Types Reference. For more information on resource update behavior, see Update Behaviors of Stack Resources. The UpdateReplacePolicy attribute applies to stack updates you perform directly, as well as stack updates performed using change sets. Note Resources that are retained continue to exist and continue to incur applicable charges until you delete those resources. Snapshots that are created with this policy continue to exist and continue to incur applicable charges until you delete those snapshots. UpdateReplacePolicy retains the old physical resource or snapshot, but removes it from AWS CloudFormation's scope. UpdateReplacePolicy differs from the DeletionPolicy attribute in that it only applies to resources replaced during stack updates. Use DeletionPolicy for resources deleted when a stack is deleted, or when the resource definition itself is deleted from the template as part of a stack update. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER DependsOn With the DependsOn attribute you can specify that the creation of a specific resource follows another. When you add a DependsOn attribute to a resource, that resource is created only after the creation of the resource specified in the DependsOn attribute. This parameter takes a string or list of strings representing Logical IDs of resources that must be created prior to this resource being created. .PARAMETER Metadata The Metadata attribute enables you to associate structured data with a resource. By adding a Metadata attribute to a resource, you can add data in JSON or YAML to the resource declaration. In addition, you can use intrinsic functions (such as GetAtt and Ref), parameters, and pseudo parameters within the Metadata attribute to add those interpreted values. This will be returned when describing the resource using AWS CLI. .PARAMETER UpdatePolicy Use the UpdatePolicy attribute to specify how AWS CloudFormation handles updates to the AWS::AutoScaling::AutoScalingGroup resource. AWS CloudFormation invokes one of three update policies depending on the type of change you make or whether a scheduled action is associated with the Auto Scaling group. You must use the "Add-UpdatePolicy" function or the [UpdatePolicy] class here. .PARAMETER Condition Logical ID of the condition that this resource needs to be true in order for this resource to be provisioned. .FUNCTIONALITY Vaporshell #> [OutputType([WAFWebACL])] [cmdletbinding()] Param( [parameter(Mandatory = $true,Position = 0)] [ValidateLogicalId()] [string] $LogicalId, [parameter(Mandatory = $true)] $DefaultAction, [parameter(Mandatory = $true)] [object] $MetricName, [parameter(Mandatory = $true)] [object] $Name, [parameter(Mandatory = $false)] [object] $Rules, [parameter()] [DeletionPolicy] $DeletionPolicy, [parameter()] [UpdateReplacePolicy] $UpdateReplacePolicy, [parameter(Mandatory = $false)] [string[]] $DependsOn, [parameter(Mandatory = $false)] [VSJson] $Metadata, [parameter(Mandatory = $false)] [UpdatePolicy] $UpdatePolicy, [parameter(Mandatory = $false)] [string] $Condition ) Process { $obj = [WAFWebACL]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'New-VSWAFWebACL' function New-VSWAFXssMatchSet { <# .SYNOPSIS Adds an AWS::WAF::XssMatchSet resource to the template. **Note** .DESCRIPTION Adds an AWS::WAF::XssMatchSet resource to the template. **Note** This is **AWS WAF Classic** documentation. For more information, see AWS WAF Classic: https://docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html in the developer guide. **For the latest version of AWS WAF**, use the AWS WAFV2 API and see the AWS WAF Developer Guide: https://docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html. With the latest version, AWS WAF has a single set of endpoints for regional and global use. A complex type that contains XssMatchTuple objects, which specify the parts of web requests that you want AWS WAF to inspect for cross-site scripting attacks and, if you want AWS WAF to inspect a header, the name of the header. If a XssMatchSet contains more than one XssMatchTuple object, a request needs to include cross-site scripting attacks in only one of the specified parts of the request to be considered a match. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-waf-xssmatchset.html .PARAMETER LogicalId The logical ID must be alphanumeric (A-Za-z0-9) and unique within the template. Use the logical name to reference the resource in other parts of the template. For example, if you want to map an Amazon Elastic Block Store volume to an Amazon EC2 instance, you reference the logical IDs to associate the block stores with the instance. .PARAMETER Name The name, if any, of the XssMatchSet. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-waf-xssmatchset.html#cfn-waf-xssmatchset-name PrimitiveType: String UpdateType: Immutable .PARAMETER XssMatchTuples Specifies the parts of web requests that you want to inspect for cross-site scripting attacks. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-waf-xssmatchset.html#cfn-waf-xssmatchset-xssmatchtuples DuplicatesAllowed: False ItemType: XssMatchTuple Type: List UpdateType: Mutable .PARAMETER DeletionPolicy With the DeletionPolicy attribute you can preserve or (in some cases) backup a resource when its stack is deleted. You specify a DeletionPolicy attribute for each resource that you want to control. If a resource has no DeletionPolicy attribute, AWS CloudFormation deletes the resource by default. To keep a resource when its stack is deleted, specify Retain for that resource. You can use retain for any resource. For example, you can retain a nested stack, S3 bucket, or EC2 instance so that you can continue to use or modify those resources after you delete their stacks. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER UpdateReplacePolicy Use the UpdateReplacePolicy attribute to retain or (in some cases) backup the existing physical instance of a resource when it is replaced during a stack update operation. When you initiate a stack update, AWS CloudFormation updates resources based on differences between what you submit and the stack's current template and parameters. If you update a resource property that requires that the resource be replaced, AWS CloudFormation recreates the resource during the update. Recreating the resource generates a new physical ID. AWS CloudFormation creates the replacement resource first, and then changes references from other dependent resources to point to the replacement resource. By default, AWS CloudFormation then deletes the old resource. Using the UpdateReplacePolicy, you can specify that AWS CloudFormation retain or (in some cases) create a snapshot of the old resource. For resources that support snapshots, such as AWS::EC2::Volume, specify Snapshot to have AWS CloudFormation create a snapshot before deleting the old resource instance. You can apply the UpdateReplacePolicy attribute to any resource. UpdateReplacePolicy is only executed if you update a resource property whose update behavior is specified as Replacement, thereby causing AWS CloudFormation to replace the old resource with a new one with a new physical ID. For example, if you update the Engine property of an AWS::RDS::DBInstance resource type, AWS CloudFormation creates a new resource and replaces the current DB instance resource with the new one. The UpdateReplacePolicy attribute would then dictate whether AWS CloudFormation deleted, retained, or created a snapshot of the old DB instance. The update behavior for each property of a resource is specified in the reference topic for that resource in the AWS Resource and Property Types Reference. For more information on resource update behavior, see Update Behaviors of Stack Resources. The UpdateReplacePolicy attribute applies to stack updates you perform directly, as well as stack updates performed using change sets. Note Resources that are retained continue to exist and continue to incur applicable charges until you delete those resources. Snapshots that are created with this policy continue to exist and continue to incur applicable charges until you delete those snapshots. UpdateReplacePolicy retains the old physical resource or snapshot, but removes it from AWS CloudFormation's scope. UpdateReplacePolicy differs from the DeletionPolicy attribute in that it only applies to resources replaced during stack updates. Use DeletionPolicy for resources deleted when a stack is deleted, or when the resource definition itself is deleted from the template as part of a stack update. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER DependsOn With the DependsOn attribute you can specify that the creation of a specific resource follows another. When you add a DependsOn attribute to a resource, that resource is created only after the creation of the resource specified in the DependsOn attribute. This parameter takes a string or list of strings representing Logical IDs of resources that must be created prior to this resource being created. .PARAMETER Metadata The Metadata attribute enables you to associate structured data with a resource. By adding a Metadata attribute to a resource, you can add data in JSON or YAML to the resource declaration. In addition, you can use intrinsic functions (such as GetAtt and Ref), parameters, and pseudo parameters within the Metadata attribute to add those interpreted values. This will be returned when describing the resource using AWS CLI. .PARAMETER UpdatePolicy Use the UpdatePolicy attribute to specify how AWS CloudFormation handles updates to the AWS::AutoScaling::AutoScalingGroup resource. AWS CloudFormation invokes one of three update policies depending on the type of change you make or whether a scheduled action is associated with the Auto Scaling group. You must use the "Add-UpdatePolicy" function or the [UpdatePolicy] class here. .PARAMETER Condition Logical ID of the condition that this resource needs to be true in order for this resource to be provisioned. .FUNCTIONALITY Vaporshell #> [OutputType([WAFXssMatchSet])] [cmdletbinding()] Param( [parameter(Mandatory = $true,Position = 0)] [ValidateLogicalId()] [string] $LogicalId, [parameter(Mandatory = $true)] [object] $Name, [parameter(Mandatory = $true)] [object] $XssMatchTuples, [parameter()] [DeletionPolicy] $DeletionPolicy, [parameter()] [UpdateReplacePolicy] $UpdateReplacePolicy, [parameter(Mandatory = $false)] [string[]] $DependsOn, [parameter(Mandatory = $false)] [VSJson] $Metadata, [parameter(Mandatory = $false)] [UpdatePolicy] $UpdatePolicy, [parameter(Mandatory = $false)] [string] $Condition ) Process { $obj = [WAFXssMatchSet]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'New-VSWAFXssMatchSet' |