VaporShell.ServiceCatalog.psm1
|
# PSM1 Contents function Format-Json { [CmdletBinding()] Param ( [Parameter(Mandatory = $true, Position = 0, ValueFromPipeline = $true)] [String] $Json ) Begin { $cleaner = { param([String]$Line) Process{ [Regex]::Replace( $Line, "\\u(?<Value>[a-zA-Z0-9]{4})", { param($m)([char]([int]::Parse( $m.Groups['Value'].Value, [System.Globalization.NumberStyles]::HexNumber ))).ToString() } ) } } } Process { if ($PSVersionTable.PSVersion.Major -lt 6) { try { $indent = 0; $res = $Json -split '\n' | ForEach-Object { if ($_ -match '[\}\]]') { # This line contains ] or }, decrement the indentation level $indent-- } $line = (' ' * $indent * 2) + $_.TrimStart().Replace(': ', ': ') if ($_ -match '[\{\[]') { # This line contains [ or {, increment the indentation level $indent++ } $cleaner.Invoke($line) } $res -join "`n" } catch { ($Json -split '\n' | ForEach-Object {$cleaner.Invoke($_)}) -join "`n" } } else { ($Json -split '\n' | ForEach-Object {$cleaner.Invoke($_)}) -join "`n" } } } function Get-TrueCount { Param ( [parameter(Mandatory = $false,Position = 0,ValueFromPipeline = $true)] $Array ) Process { if ($array) { if ($array.Count) { $count = $array.Count } else { $count = 1 } } else { $count = 0 } } End { return $count } } function New-VSError { <# .SYNOPSIS Error generator function to use in tandem with $PSCmdlet.ThrowTerminatingError() .PARAMETER Result Allows input of an error from AWS SDK, resulting in the Exception message being parsed out. .PARAMETER String Used to create basic String message errors in the same wrapper #> [cmdletbinding(DefaultParameterSetName="Result")] param( [parameter(Position=0,ParameterSetName="Result")] $Result, [parameter(Position=0,ParameterSetName="String")] $String ) switch ($PSCmdlet.ParameterSetName) { Result { $Exception = "$($result.Exception.InnerException.Message)" } String { $Exception = "$String" } } $e = New-Object "System.Exception" $Exception $errorRecord = New-Object 'System.Management.Automation.ErrorRecord' $e, $null, ([System.Management.Automation.ErrorCategory]::InvalidOperation), $null return $errorRecord } function ResolveS3Endpoint { <# .SYNOPSIS Resolves the S3 endpoint most appropriate for each region. #> Param ( [parameter(Mandatory=$true,Position=0)] [ValidateSet("eu-west-2","ap-south-1","us-east-2","sa-east-1","us-west-1","us-west-2","eu-west-1","ap-southeast-2","ca-central-1","ap-northeast-2","us-east-1","eu-central-1","ap-southeast-1","ap-northeast-1")] [String] $Region ) $endpointMap = @{ "us-east-2" = "s3.us-east-2.amazonaws.com" "us-east-1" = "s3.amazonaws.com" "us-west-1" = "s3-us-west-1.amazonaws.com" "us-west-2" = "s3-us-west-2.amazonaws.com" "ca-central-1" = "s3.ca-central-1.amazonaws.com" "ap-south-1" = "s3.ap-south-1.amazonaws.com" "ap-northeast-2" = "s3.ap-northeast-2.amazonaws.com" "ap-southeast-1" = "s3-ap-southeast-1.amazonaws.com" "ap-southeast-2" = "s3-ap-southeast-2.amazonaws.com" "ap-northeast-1" = "s3-ap-northeast-1.amazonaws.com" "eu-central-1" = "s3.eu-central-1.amazonaws.com" "eu-west-1" = "s3-eu-west-1.amazonaws.com" "eu-west-2" = "s3.eu-west-2.amazonaws.com" "sa-east-1" = "s3-sa-east-1.amazonaws.com" } return $endpointMap[$Region] } function Add-VSServiceCatalogCloudFormationProductProvisioningArtifactProperties { <# .SYNOPSIS Adds an AWS::ServiceCatalog::CloudFormationProduct.ProvisioningArtifactProperties resource property to the template. Information about a provisioning artifact (also known as a version for a product. .DESCRIPTION Adds an AWS::ServiceCatalog::CloudFormationProduct.ProvisioningArtifactProperties resource property to the template. Information about a provisioning artifact (also known as a version for a product. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-servicecatalog-cloudformationproduct-provisioningartifactproperties.html .PARAMETER Description The description of the provisioning artifact, including how it differs from the previous provisioning artifact. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-servicecatalog-cloudformationproduct-provisioningartifactproperties.html#cfn-servicecatalog-cloudformationproduct-provisioningartifactproperties-description PrimitiveType: String UpdateType: Mutable .PARAMETER DisableTemplateValidation If set to true, AWS Service Catalog stops validating the specified provisioning artifact even if it is invalid. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-servicecatalog-cloudformationproduct-provisioningartifactproperties.html#cfn-servicecatalog-cloudformationproduct-provisioningartifactproperties-disabletemplatevalidation PrimitiveType: Boolean UpdateType: Mutable .PARAMETER Info The URL of the CloudFormation template in Amazon S3. Specify the URL in JSON format as follows: "LoadTemplateFromURL": "https://s3.amazonaws.com/cf-templates-ozkq9d3hgiq2-us-east-1/..." Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-servicecatalog-cloudformationproduct-provisioningartifactproperties.html#cfn-servicecatalog-cloudformationproduct-provisioningartifactproperties-info PrimitiveType: Json UpdateType: Mutable .PARAMETER Name The name of the provisioning artifact for example, v1 v2beta. No spaces are allowed. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-servicecatalog-cloudformationproduct-provisioningartifactproperties.html#cfn-servicecatalog-cloudformationproduct-provisioningartifactproperties-name PrimitiveType: String UpdateType: Mutable .FUNCTIONALITY Vaporshell #> [OutputType([ServiceCatalogCloudFormationProductProvisioningArtifactProperties])] [cmdletbinding()] Param( [parameter(Mandatory = $false)] [object] $Description, [parameter(Mandatory = $false)] [object] $DisableTemplateValidation, [parameter(Mandatory = $true)] [VSJson] $Info, [parameter(Mandatory = $false)] [object] $Name ) Process { $obj = [ServiceCatalogCloudFormationProductProvisioningArtifactProperties]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSServiceCatalogCloudFormationProductProvisioningArtifactProperties' function Add-VSServiceCatalogCloudFormationProvisionedProductProvisioningParameter { <# .SYNOPSIS Adds an AWS::ServiceCatalog::CloudFormationProvisionedProduct.ProvisioningParameter resource property to the template. Information about a parameter used to provision a product. .DESCRIPTION Adds an AWS::ServiceCatalog::CloudFormationProvisionedProduct.ProvisioningParameter resource property to the template. Information about a parameter used to provision a product. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-servicecatalog-cloudformationprovisionedproduct-provisioningparameter.html .PARAMETER Key The parameter key. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-servicecatalog-cloudformationprovisionedproduct-provisioningparameter.html#cfn-servicecatalog-cloudformationprovisionedproduct-provisioningparameter-key UpdateType: Mutable PrimitiveType: String .PARAMETER Value The parameter value. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-servicecatalog-cloudformationprovisionedproduct-provisioningparameter.html#cfn-servicecatalog-cloudformationprovisionedproduct-provisioningparameter-value UpdateType: Mutable PrimitiveType: String .FUNCTIONALITY Vaporshell #> [OutputType([ServiceCatalogCloudFormationProvisionedProductProvisioningParameter])] [cmdletbinding()] Param( [parameter(Mandatory = $true)] [object] $Key, [parameter(Mandatory = $true)] [object] $Value ) Process { $obj = [ServiceCatalogCloudFormationProvisionedProductProvisioningParameter]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSServiceCatalogCloudFormationProvisionedProductProvisioningParameter' function Add-VSServiceCatalogCloudFormationProvisionedProductProvisioningPreferences { <# .SYNOPSIS Adds an AWS::ServiceCatalog::CloudFormationProvisionedProduct.ProvisioningPreferences resource property to the template. The user-defined preferences that will be applied when updating a provisioned product. Not all preferences are applicable to all provisioned product types. .DESCRIPTION Adds an AWS::ServiceCatalog::CloudFormationProvisionedProduct.ProvisioningPreferences resource property to the template. The user-defined preferences that will be applied when updating a provisioned product. Not all preferences are applicable to all provisioned product types. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-servicecatalog-cloudformationprovisionedproduct-provisioningpreferences.html .PARAMETER StackSetAccounts One or more AWS accounts that will have access to the provisioned product. Applicable only to a CFN_STACKSET provisioned product type. The AWS accounts specified should be within the list of accounts in the STACKSET constraint. To get the list of accounts in the STACKSET constraint, use the DescribeProvisioningParameters operation. If no values are specified, the default value is all accounts from the STACKSET constraint. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-servicecatalog-cloudformationprovisionedproduct-provisioningpreferences.html#cfn-servicecatalog-cloudformationprovisionedproduct-provisioningpreferences-stacksetaccounts UpdateType: Mutable Type: List PrimitiveItemType: String DuplicatesAllowed: False .PARAMETER StackSetFailureToleranceCount The number of accounts, per region, for which this operation can fail before AWS Service Catalog stops the operation in that region. If the operation is stopped in a region, AWS Service Catalog doesn't attempt the operation in any subsequent regions. Applicable only to a CFN_STACKSET provisioned product type. Conditional: You must specify either StackSetFailureToleranceCount or StackSetFailureTolerancePercentage, but not both. The default value is 0 if no value is specified. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-servicecatalog-cloudformationprovisionedproduct-provisioningpreferences.html#cfn-servicecatalog-cloudformationprovisionedproduct-provisioningpreferences-stacksetfailuretolerancecount UpdateType: Mutable PrimitiveType: Integer .PARAMETER StackSetFailureTolerancePercentage The percentage of accounts, per region, for which this stack operation can fail before AWS Service Catalog stops the operation in that region. If the operation is stopped in a region, AWS Service Catalog doesn't attempt the operation in any subsequent regions. When calculating the number of accounts based on the specified percentage, AWS Service Catalog rounds down to the next whole number. Applicable only to a CFN_STACKSET provisioned product type. Conditional: You must specify either StackSetFailureToleranceCount or StackSetFailureTolerancePercentage, but not both. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-servicecatalog-cloudformationprovisionedproduct-provisioningpreferences.html#cfn-servicecatalog-cloudformationprovisionedproduct-provisioningpreferences-stacksetfailuretolerancepercentage UpdateType: Mutable PrimitiveType: Integer .PARAMETER StackSetMaxConcurrencyCount The maximum number of accounts in which to perform this operation at one time. This is dependent on the value of StackSetFailureToleranceCount. StackSetMaxConcurrentCount is at most one more than the StackSetFailureToleranceCount. Note that this setting lets you specify the maximum for operations. For large deployments, under certain circumstances the actual number of accounts acted upon concurrently may be lower due to service throttling. Applicable only to a CFN_STACKSET provisioned product type. Conditional: You must specify either StackSetMaxConcurrentCount or StackSetMaxConcurrentPercentage, but not both. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-servicecatalog-cloudformationprovisionedproduct-provisioningpreferences.html#cfn-servicecatalog-cloudformationprovisionedproduct-provisioningpreferences-stacksetmaxconcurrencycount UpdateType: Mutable PrimitiveType: Integer .PARAMETER StackSetMaxConcurrencyPercentage The maximum percentage of accounts in which to perform this operation at one time. When calculating the number of accounts based on the specified percentage, AWS Service Catalog rounds down to the next whole number. This is true except in cases where rounding down would result is zero. In this case, AWS Service Catalog sets the number as 1 instead. Note that this setting lets you specify the maximum for operations. For large deployments, under certain circumstances the actual number of accounts acted upon concurrently may be lower due to service throttling. Applicable only to a CFN_STACKSET provisioned product type. Conditional: You must specify either StackSetMaxConcurrentCount or StackSetMaxConcurrentPercentage, but not both. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-servicecatalog-cloudformationprovisionedproduct-provisioningpreferences.html#cfn-servicecatalog-cloudformationprovisionedproduct-provisioningpreferences-stacksetmaxconcurrencypercentage UpdateType: Mutable PrimitiveType: Integer .PARAMETER StackSetOperationType Determines what action AWS Service Catalog performs to a stack set or a stack instance represented by the provisioned product. The default value is UPDATE if nothing is specified. Applicable only to a CFN_STACKSET provisioned product type. CREATE Creates a new stack instance in the stack set represented by the provisioned product. In this case, only new stack instances are created based on accounts and regions; if new ProductId or ProvisioningArtifactID are passed, they will be ignored. UPDATE Updates the stack set represented by the provisioned product and also its stack instances. DELETE Deletes a stack instance in the stack set represented by the provisioned product. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-servicecatalog-cloudformationprovisionedproduct-provisioningpreferences.html#cfn-servicecatalog-cloudformationprovisionedproduct-provisioningpreferences-stacksetoperationtype UpdateType: Mutable PrimitiveType: String .PARAMETER StackSetRegions One or more AWS Regions where the provisioned product will be available. Applicable only to a CFN_STACKSET provisioned product type. The specified regions should be within the list of regions from the STACKSET constraint. To get the list of regions in the STACKSET constraint, use the DescribeProvisioningParameters operation. If no values are specified, the default value is all regions from the STACKSET constraint. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-servicecatalog-cloudformationprovisionedproduct-provisioningpreferences.html#cfn-servicecatalog-cloudformationprovisionedproduct-provisioningpreferences-stacksetregions UpdateType: Mutable Type: List PrimitiveItemType: String DuplicatesAllowed: False .FUNCTIONALITY Vaporshell #> [OutputType([ServiceCatalogCloudFormationProvisionedProductProvisioningPreferences])] [cmdletbinding()] Param( [parameter(Mandatory = $false)] $StackSetAccounts, [parameter(Mandatory = $false)] [object] $StackSetFailureToleranceCount, [parameter(Mandatory = $false)] [object] $StackSetFailureTolerancePercentage, [parameter(Mandatory = $false)] [object] $StackSetMaxConcurrencyCount, [parameter(Mandatory = $false)] [object] $StackSetMaxConcurrencyPercentage, [parameter(Mandatory = $false)] [object] $StackSetOperationType, [parameter(Mandatory = $false)] $StackSetRegions ) Process { $obj = [ServiceCatalogCloudFormationProvisionedProductProvisioningPreferences]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSServiceCatalogCloudFormationProvisionedProductProvisioningPreferences' function New-VSServiceCatalogAcceptedPortfolioShare { <# .SYNOPSIS Adds an AWS::ServiceCatalog::AcceptedPortfolioShare resource to the template. Accepts an offer to share the specified portfolio. .DESCRIPTION Adds an AWS::ServiceCatalog::AcceptedPortfolioShare resource to the template. Accepts an offer to share the specified portfolio. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-servicecatalog-acceptedportfolioshare.html .PARAMETER LogicalId The logical ID must be alphanumeric (A-Za-z0-9) and unique within the template. Use the logical name to reference the resource in other parts of the template. For example, if you want to map an Amazon Elastic Block Store volume to an Amazon EC2 instance, you reference the logical IDs to associate the block stores with the instance. .PARAMETER AcceptLanguage The language code. + en - English default + jp - Japanese + zh - Chinese Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-servicecatalog-acceptedportfolioshare.html#cfn-servicecatalog-acceptedportfolioshare-acceptlanguage PrimitiveType: String UpdateType: Immutable .PARAMETER PortfolioId The portfolio identifier. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-servicecatalog-acceptedportfolioshare.html#cfn-servicecatalog-acceptedportfolioshare-portfolioid PrimitiveType: String UpdateType: Immutable .PARAMETER DeletionPolicy With the DeletionPolicy attribute you can preserve or (in some cases) backup a resource when its stack is deleted. You specify a DeletionPolicy attribute for each resource that you want to control. If a resource has no DeletionPolicy attribute, AWS CloudFormation deletes the resource by default. To keep a resource when its stack is deleted, specify Retain for that resource. You can use retain for any resource. For example, you can retain a nested stack, S3 bucket, or EC2 instance so that you can continue to use or modify those resources after you delete their stacks. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER UpdateReplacePolicy Use the UpdateReplacePolicy attribute to retain or (in some cases) backup the existing physical instance of a resource when it is replaced during a stack update operation. When you initiate a stack update, AWS CloudFormation updates resources based on differences between what you submit and the stack's current template and parameters. If you update a resource property that requires that the resource be replaced, AWS CloudFormation recreates the resource during the update. Recreating the resource generates a new physical ID. AWS CloudFormation creates the replacement resource first, and then changes references from other dependent resources to point to the replacement resource. By default, AWS CloudFormation then deletes the old resource. Using the UpdateReplacePolicy, you can specify that AWS CloudFormation retain or (in some cases) create a snapshot of the old resource. For resources that support snapshots, such as AWS::EC2::Volume, specify Snapshot to have AWS CloudFormation create a snapshot before deleting the old resource instance. You can apply the UpdateReplacePolicy attribute to any resource. UpdateReplacePolicy is only executed if you update a resource property whose update behavior is specified as Replacement, thereby causing AWS CloudFormation to replace the old resource with a new one with a new physical ID. For example, if you update the Engine property of an AWS::RDS::DBInstance resource type, AWS CloudFormation creates a new resource and replaces the current DB instance resource with the new one. The UpdateReplacePolicy attribute would then dictate whether AWS CloudFormation deleted, retained, or created a snapshot of the old DB instance. The update behavior for each property of a resource is specified in the reference topic for that resource in the AWS Resource and Property Types Reference. For more information on resource update behavior, see Update Behaviors of Stack Resources. The UpdateReplacePolicy attribute applies to stack updates you perform directly, as well as stack updates performed using change sets. Note Resources that are retained continue to exist and continue to incur applicable charges until you delete those resources. Snapshots that are created with this policy continue to exist and continue to incur applicable charges until you delete those snapshots. UpdateReplacePolicy retains the old physical resource or snapshot, but removes it from AWS CloudFormation's scope. UpdateReplacePolicy differs from the DeletionPolicy attribute in that it only applies to resources replaced during stack updates. Use DeletionPolicy for resources deleted when a stack is deleted, or when the resource definition itself is deleted from the template as part of a stack update. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER DependsOn With the DependsOn attribute you can specify that the creation of a specific resource follows another. When you add a DependsOn attribute to a resource, that resource is created only after the creation of the resource specified in the DependsOn attribute. This parameter takes a string or list of strings representing Logical IDs of resources that must be created prior to this resource being created. .PARAMETER Metadata The Metadata attribute enables you to associate structured data with a resource. By adding a Metadata attribute to a resource, you can add data in JSON or YAML to the resource declaration. In addition, you can use intrinsic functions (such as GetAtt and Ref), parameters, and pseudo parameters within the Metadata attribute to add those interpreted values. This will be returned when describing the resource using AWS CLI. .PARAMETER UpdatePolicy Use the UpdatePolicy attribute to specify how AWS CloudFormation handles updates to the AWS::AutoScaling::AutoScalingGroup resource. AWS CloudFormation invokes one of three update policies depending on the type of change you make or whether a scheduled action is associated with the Auto Scaling group. You must use the "Add-UpdatePolicy" function or the [UpdatePolicy] class here. .PARAMETER Condition Logical ID of the condition that this resource needs to be true in order for this resource to be provisioned. .FUNCTIONALITY Vaporshell #> [OutputType([ServiceCatalogAcceptedPortfolioShare])] [cmdletbinding()] Param( [parameter(Mandatory = $true,Position = 0)] [ValidateLogicalId()] [string] $LogicalId, [parameter(Mandatory = $false)] [object] $AcceptLanguage, [parameter(Mandatory = $true)] [object] $PortfolioId, [parameter()] [DeletionPolicy] $DeletionPolicy, [parameter()] [UpdateReplacePolicy] $UpdateReplacePolicy, [parameter(Mandatory = $false)] [string[]] $DependsOn, [parameter(Mandatory = $false)] [VSJson] $Metadata, [parameter(Mandatory = $false)] [UpdatePolicy] $UpdatePolicy, [parameter(Mandatory = $false)] [string] $Condition ) Process { $obj = [ServiceCatalogAcceptedPortfolioShare]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'New-VSServiceCatalogAcceptedPortfolioShare' function New-VSServiceCatalogCloudFormationProduct { <# .SYNOPSIS Adds an AWS::ServiceCatalog::CloudFormationProduct resource to the template. Specifies a product. .DESCRIPTION Adds an AWS::ServiceCatalog::CloudFormationProduct resource to the template. Specifies a product. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-servicecatalog-cloudformationproduct.html .PARAMETER LogicalId The logical ID must be alphanumeric (A-Za-z0-9) and unique within the template. Use the logical name to reference the resource in other parts of the template. For example, if you want to map an Amazon Elastic Block Store volume to an Amazon EC2 instance, you reference the logical IDs to associate the block stores with the instance. .PARAMETER ReplaceProvisioningArtifacts + CreateProduct: https://docs.aws.amazon.com/servicecatalog/latest/dg/API_CreateProduct.html in the *AWS Service Catalog API Reference* Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-servicecatalog-cloudformationproduct.html#cfn-servicecatalog-cloudformationproduct-replaceprovisioningartifacts PrimitiveType: Boolean UpdateType: Mutable .PARAMETER Owner The owner of the product. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-servicecatalog-cloudformationproduct.html#cfn-servicecatalog-cloudformationproduct-owner PrimitiveType: String UpdateType: Mutable .PARAMETER SupportDescription The support information about the product. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-servicecatalog-cloudformationproduct.html#cfn-servicecatalog-cloudformationproduct-supportdescription PrimitiveType: String UpdateType: Mutable .PARAMETER Description The description of the product. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-servicecatalog-cloudformationproduct.html#cfn-servicecatalog-cloudformationproduct-description PrimitiveType: String UpdateType: Mutable .PARAMETER Distributor The distributor of the product. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-servicecatalog-cloudformationproduct.html#cfn-servicecatalog-cloudformationproduct-distributor PrimitiveType: String UpdateType: Mutable .PARAMETER SupportEmail The contact email for product support. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-servicecatalog-cloudformationproduct.html#cfn-servicecatalog-cloudformationproduct-supportemail PrimitiveType: String UpdateType: Mutable .PARAMETER AcceptLanguage The language code. + en - English default + jp - Japanese + zh - Chinese Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-servicecatalog-cloudformationproduct.html#cfn-servicecatalog-cloudformationproduct-acceptlanguage PrimitiveType: String UpdateType: Mutable .PARAMETER SupportUrl The contact URL for product support. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-servicecatalog-cloudformationproduct.html#cfn-servicecatalog-cloudformationproduct-supporturl PrimitiveType: String UpdateType: Mutable .PARAMETER Tags One or more tags. Type: List Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-servicecatalog-cloudformationproduct.html#cfn-servicecatalog-cloudformationproduct-tags ItemType: Tag UpdateType: Mutable .PARAMETER Name The name of the product. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-servicecatalog-cloudformationproduct.html#cfn-servicecatalog-cloudformationproduct-name PrimitiveType: String UpdateType: Mutable .PARAMETER ProvisioningArtifactParameters The configuration of the provisioning artifact also known as a version. Type: List Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-servicecatalog-cloudformationproduct.html#cfn-servicecatalog-cloudformationproduct-provisioningartifactparameters ItemType: ProvisioningArtifactProperties UpdateType: Mutable .PARAMETER DeletionPolicy With the DeletionPolicy attribute you can preserve or (in some cases) backup a resource when its stack is deleted. You specify a DeletionPolicy attribute for each resource that you want to control. If a resource has no DeletionPolicy attribute, AWS CloudFormation deletes the resource by default. To keep a resource when its stack is deleted, specify Retain for that resource. You can use retain for any resource. For example, you can retain a nested stack, S3 bucket, or EC2 instance so that you can continue to use or modify those resources after you delete their stacks. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER UpdateReplacePolicy Use the UpdateReplacePolicy attribute to retain or (in some cases) backup the existing physical instance of a resource when it is replaced during a stack update operation. When you initiate a stack update, AWS CloudFormation updates resources based on differences between what you submit and the stack's current template and parameters. If you update a resource property that requires that the resource be replaced, AWS CloudFormation recreates the resource during the update. Recreating the resource generates a new physical ID. AWS CloudFormation creates the replacement resource first, and then changes references from other dependent resources to point to the replacement resource. By default, AWS CloudFormation then deletes the old resource. Using the UpdateReplacePolicy, you can specify that AWS CloudFormation retain or (in some cases) create a snapshot of the old resource. For resources that support snapshots, such as AWS::EC2::Volume, specify Snapshot to have AWS CloudFormation create a snapshot before deleting the old resource instance. You can apply the UpdateReplacePolicy attribute to any resource. UpdateReplacePolicy is only executed if you update a resource property whose update behavior is specified as Replacement, thereby causing AWS CloudFormation to replace the old resource with a new one with a new physical ID. For example, if you update the Engine property of an AWS::RDS::DBInstance resource type, AWS CloudFormation creates a new resource and replaces the current DB instance resource with the new one. The UpdateReplacePolicy attribute would then dictate whether AWS CloudFormation deleted, retained, or created a snapshot of the old DB instance. The update behavior for each property of a resource is specified in the reference topic for that resource in the AWS Resource and Property Types Reference. For more information on resource update behavior, see Update Behaviors of Stack Resources. The UpdateReplacePolicy attribute applies to stack updates you perform directly, as well as stack updates performed using change sets. Note Resources that are retained continue to exist and continue to incur applicable charges until you delete those resources. Snapshots that are created with this policy continue to exist and continue to incur applicable charges until you delete those snapshots. UpdateReplacePolicy retains the old physical resource or snapshot, but removes it from AWS CloudFormation's scope. UpdateReplacePolicy differs from the DeletionPolicy attribute in that it only applies to resources replaced during stack updates. Use DeletionPolicy for resources deleted when a stack is deleted, or when the resource definition itself is deleted from the template as part of a stack update. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER DependsOn With the DependsOn attribute you can specify that the creation of a specific resource follows another. When you add a DependsOn attribute to a resource, that resource is created only after the creation of the resource specified in the DependsOn attribute. This parameter takes a string or list of strings representing Logical IDs of resources that must be created prior to this resource being created. .PARAMETER Metadata The Metadata attribute enables you to associate structured data with a resource. By adding a Metadata attribute to a resource, you can add data in JSON or YAML to the resource declaration. In addition, you can use intrinsic functions (such as GetAtt and Ref), parameters, and pseudo parameters within the Metadata attribute to add those interpreted values. This will be returned when describing the resource using AWS CLI. .PARAMETER UpdatePolicy Use the UpdatePolicy attribute to specify how AWS CloudFormation handles updates to the AWS::AutoScaling::AutoScalingGroup resource. AWS CloudFormation invokes one of three update policies depending on the type of change you make or whether a scheduled action is associated with the Auto Scaling group. You must use the "Add-UpdatePolicy" function or the [UpdatePolicy] class here. .PARAMETER Condition Logical ID of the condition that this resource needs to be true in order for this resource to be provisioned. .FUNCTIONALITY Vaporshell #> [OutputType([ServiceCatalogCloudFormationProduct])] [cmdletbinding()] Param( [parameter(Mandatory = $true,Position = 0)] [ValidateLogicalId()] [string] $LogicalId, [parameter(Mandatory = $false)] [object] $ReplaceProvisioningArtifacts, [parameter(Mandatory = $true)] [object] $Owner, [parameter(Mandatory = $false)] [object] $SupportDescription, [parameter(Mandatory = $false)] [object] $Description, [parameter(Mandatory = $false)] [object] $Distributor, [parameter(Mandatory = $false)] [object] $SupportEmail, [parameter(Mandatory = $false)] [object] $AcceptLanguage, [parameter(Mandatory = $false)] [object] $SupportUrl, [TransformTag()] [object] [parameter(Mandatory = $false)] $Tags, [parameter(Mandatory = $true)] [object] $Name, [parameter(Mandatory = $true)] [object] $ProvisioningArtifactParameters, [parameter()] [DeletionPolicy] $DeletionPolicy, [parameter()] [UpdateReplacePolicy] $UpdateReplacePolicy, [parameter(Mandatory = $false)] [string[]] $DependsOn, [parameter(Mandatory = $false)] [VSJson] $Metadata, [parameter(Mandatory = $false)] [UpdatePolicy] $UpdatePolicy, [parameter(Mandatory = $false)] [string] $Condition ) Process { $obj = [ServiceCatalogCloudFormationProduct]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'New-VSServiceCatalogCloudFormationProduct' function New-VSServiceCatalogCloudFormationProvisionedProduct { <# .SYNOPSIS Adds an AWS::ServiceCatalog::CloudFormationProvisionedProduct resource to the template. Provisions the specified product. .DESCRIPTION Adds an AWS::ServiceCatalog::CloudFormationProvisionedProduct resource to the template. Provisions the specified product. A provisioned product is a resourced instance of a product. For example, provisioning a product based on a CloudFormation template launches a CloudFormation stack and its underlying resources. You can check the status of this request using DescribeRecord: https://docs.aws.amazon.com/servicecatalog/latest/dg/API_DescribeRecord.html. If the request contains a tag key with an empty list of values, there is a tag conflict for that key. Do not include conflicted keys as tags, or this causes the error "Parameter validation failed: Missing required parameter in Tags*N*]:*Value*". .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-servicecatalog-cloudformationprovisionedproduct.html .PARAMETER LogicalId The logical ID must be alphanumeric (A-Za-z0-9) and unique within the template. Use the logical name to reference the resource in other parts of the template. For example, if you want to map an Amazon Elastic Block Store volume to an Amazon EC2 instance, you reference the logical IDs to associate the block stores with the instance. .PARAMETER AcceptLanguage The language code. + en - English default + jp - Japanese + zh - Chinese Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-servicecatalog-cloudformationprovisionedproduct.html#cfn-servicecatalog-cloudformationprovisionedproduct-acceptlanguage UpdateType: Mutable PrimitiveType: String .PARAMETER NotificationArns Passed to CloudFormation. The SNS topic ARNs to which to publish stack-related events. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-servicecatalog-cloudformationprovisionedproduct.html#cfn-servicecatalog-cloudformationprovisionedproduct-notificationarns UpdateType: Immutable Type: List PrimitiveItemType: String DuplicatesAllowed: False .PARAMETER PathId The path identifier of the product. This value is optional if the product has a default path, and required if the product has more than one path. To list the paths for a product, use ListLaunchPaths: https://docs.aws.amazon.com/servicecatalog/latest/dg/API_ListLaunchPaths.html. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-servicecatalog-cloudformationprovisionedproduct.html#cfn-servicecatalog-cloudformationprovisionedproduct-pathid UpdateType: Mutable PrimitiveType: String .PARAMETER PathName + ProvisionProduct: https://docs.aws.amazon.com/servicecatalog/latest/dg/API_ProvisionProduct.html in the *AWS Service Catalog API Reference* Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-servicecatalog-cloudformationprovisionedproduct.html#cfn-servicecatalog-cloudformationprovisionedproduct-pathname UpdateType: Mutable PrimitiveType: String .PARAMETER ProductId The product identifier. You must specify either the ID or the name of the product, but not both. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-servicecatalog-cloudformationprovisionedproduct.html#cfn-servicecatalog-cloudformationprovisionedproduct-productid UpdateType: Mutable PrimitiveType: String .PARAMETER ProductName A user-friendly name for the provisioned product. This value must be unique for the AWS account and cannot be updated after the product is provisioned. Each time a stack is created or updated, if ProductName is provided it will successfully resolve to ProductId as long as only one product exists in the account/region with that ProductName. You must specify either the name or the ID of the product, but not both. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-servicecatalog-cloudformationprovisionedproduct.html#cfn-servicecatalog-cloudformationprovisionedproduct-productname UpdateType: Mutable PrimitiveType: String .PARAMETER ProvisionedProductName A user-friendly name for the provisioned product. This value must be unique for the AWS account and cannot be updated after the product is provisioned. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-servicecatalog-cloudformationprovisionedproduct.html#cfn-servicecatalog-cloudformationprovisionedproduct-provisionedproductname UpdateType: Immutable PrimitiveType: String .PARAMETER ProvisioningArtifactId The identifier of the provisioning artifact also known as a version. You must specify either the ID or the name of the provisioning artifact, but not both. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-servicecatalog-cloudformationprovisionedproduct.html#cfn-servicecatalog-cloudformationprovisionedproduct-provisioningartifactid UpdateType: Mutable PrimitiveType: String .PARAMETER ProvisioningArtifactName The name of the provisioning artifact also known as a version for the product. This name must be unique for the product. You must specify either the name or the ID of the provisioning artifact, but not both. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-servicecatalog-cloudformationprovisionedproduct.html#cfn-servicecatalog-cloudformationprovisionedproduct-provisioningartifactname UpdateType: Mutable PrimitiveType: String .PARAMETER ProvisioningParameters Parameters specified by the administrator that are required for provisioning the product. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-servicecatalog-cloudformationprovisionedproduct.html#cfn-servicecatalog-cloudformationprovisionedproduct-provisioningparameters UpdateType: Mutable Type: List ItemType: ProvisioningParameter .PARAMETER ProvisioningPreferences StackSet preferences that are required for provisioning the product or updating a provisioned product. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-servicecatalog-cloudformationprovisionedproduct.html#cfn-servicecatalog-cloudformationprovisionedproduct-provisioningpreferences UpdateType: Mutable Type: ProvisioningPreferences .PARAMETER Tags One or more tags. Requires the provisioned product to have an ResourceUpdateConstraint: https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-servicecatalog-resourceupdateconstraint.html resource with TagUpdatesOnProvisionedProduct set to ALLOWED to allow tag updates. If RESOURCE_UPDATE constraint is not present, tags updates are ignored. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-servicecatalog-cloudformationprovisionedproduct.html#cfn-servicecatalog-cloudformationprovisionedproduct-tags UpdateType: Mutable Type: List ItemType: Tag .PARAMETER DeletionPolicy With the DeletionPolicy attribute you can preserve or (in some cases) backup a resource when its stack is deleted. You specify a DeletionPolicy attribute for each resource that you want to control. If a resource has no DeletionPolicy attribute, AWS CloudFormation deletes the resource by default. To keep a resource when its stack is deleted, specify Retain for that resource. You can use retain for any resource. For example, you can retain a nested stack, S3 bucket, or EC2 instance so that you can continue to use or modify those resources after you delete their stacks. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER UpdateReplacePolicy Use the UpdateReplacePolicy attribute to retain or (in some cases) backup the existing physical instance of a resource when it is replaced during a stack update operation. When you initiate a stack update, AWS CloudFormation updates resources based on differences between what you submit and the stack's current template and parameters. If you update a resource property that requires that the resource be replaced, AWS CloudFormation recreates the resource during the update. Recreating the resource generates a new physical ID. AWS CloudFormation creates the replacement resource first, and then changes references from other dependent resources to point to the replacement resource. By default, AWS CloudFormation then deletes the old resource. Using the UpdateReplacePolicy, you can specify that AWS CloudFormation retain or (in some cases) create a snapshot of the old resource. For resources that support snapshots, such as AWS::EC2::Volume, specify Snapshot to have AWS CloudFormation create a snapshot before deleting the old resource instance. You can apply the UpdateReplacePolicy attribute to any resource. UpdateReplacePolicy is only executed if you update a resource property whose update behavior is specified as Replacement, thereby causing AWS CloudFormation to replace the old resource with a new one with a new physical ID. For example, if you update the Engine property of an AWS::RDS::DBInstance resource type, AWS CloudFormation creates a new resource and replaces the current DB instance resource with the new one. The UpdateReplacePolicy attribute would then dictate whether AWS CloudFormation deleted, retained, or created a snapshot of the old DB instance. The update behavior for each property of a resource is specified in the reference topic for that resource in the AWS Resource and Property Types Reference. For more information on resource update behavior, see Update Behaviors of Stack Resources. The UpdateReplacePolicy attribute applies to stack updates you perform directly, as well as stack updates performed using change sets. Note Resources that are retained continue to exist and continue to incur applicable charges until you delete those resources. Snapshots that are created with this policy continue to exist and continue to incur applicable charges until you delete those snapshots. UpdateReplacePolicy retains the old physical resource or snapshot, but removes it from AWS CloudFormation's scope. UpdateReplacePolicy differs from the DeletionPolicy attribute in that it only applies to resources replaced during stack updates. Use DeletionPolicy for resources deleted when a stack is deleted, or when the resource definition itself is deleted from the template as part of a stack update. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER DependsOn With the DependsOn attribute you can specify that the creation of a specific resource follows another. When you add a DependsOn attribute to a resource, that resource is created only after the creation of the resource specified in the DependsOn attribute. This parameter takes a string or list of strings representing Logical IDs of resources that must be created prior to this resource being created. .PARAMETER Metadata The Metadata attribute enables you to associate structured data with a resource. By adding a Metadata attribute to a resource, you can add data in JSON or YAML to the resource declaration. In addition, you can use intrinsic functions (such as GetAtt and Ref), parameters, and pseudo parameters within the Metadata attribute to add those interpreted values. This will be returned when describing the resource using AWS CLI. .PARAMETER UpdatePolicy Use the UpdatePolicy attribute to specify how AWS CloudFormation handles updates to the AWS::AutoScaling::AutoScalingGroup resource. AWS CloudFormation invokes one of three update policies depending on the type of change you make or whether a scheduled action is associated with the Auto Scaling group. You must use the "Add-UpdatePolicy" function or the [UpdatePolicy] class here. .PARAMETER Condition Logical ID of the condition that this resource needs to be true in order for this resource to be provisioned. .FUNCTIONALITY Vaporshell #> [OutputType([ServiceCatalogCloudFormationProvisionedProduct])] [cmdletbinding()] Param( [parameter(Mandatory = $true,Position = 0)] [ValidateLogicalId()] [string] $LogicalId, [parameter(Mandatory = $false)] [object] $AcceptLanguage, [parameter(Mandatory = $false)] $NotificationArns, [parameter(Mandatory = $false)] [object] $PathId, [parameter(Mandatory = $false)] [object] $PathName, [parameter(Mandatory = $false)] [object] $ProductId, [parameter(Mandatory = $false)] [object] $ProductName, [parameter(Mandatory = $false)] [object] $ProvisionedProductName, [parameter(Mandatory = $false)] [object] $ProvisioningArtifactId, [parameter(Mandatory = $false)] [object] $ProvisioningArtifactName, [parameter(Mandatory = $false)] [object] $ProvisioningParameters, [parameter(Mandatory = $false)] $ProvisioningPreferences, [TransformTag()] [object] [parameter(Mandatory = $false)] $Tags, [parameter()] [DeletionPolicy] $DeletionPolicy, [parameter()] [UpdateReplacePolicy] $UpdateReplacePolicy, [parameter(Mandatory = $false)] [string[]] $DependsOn, [parameter(Mandatory = $false)] [VSJson] $Metadata, [parameter(Mandatory = $false)] [UpdatePolicy] $UpdatePolicy, [parameter(Mandatory = $false)] [string] $Condition ) Process { $obj = [ServiceCatalogCloudFormationProvisionedProduct]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'New-VSServiceCatalogCloudFormationProvisionedProduct' function New-VSServiceCatalogLaunchNotificationConstraint { <# .SYNOPSIS Adds an AWS::ServiceCatalog::LaunchNotificationConstraint resource to the template. Specifies a notification constraint. .DESCRIPTION Adds an AWS::ServiceCatalog::LaunchNotificationConstraint resource to the template. Specifies a notification constraint. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-servicecatalog-launchnotificationconstraint.html .PARAMETER LogicalId The logical ID must be alphanumeric (A-Za-z0-9) and unique within the template. Use the logical name to reference the resource in other parts of the template. For example, if you want to map an Amazon Elastic Block Store volume to an Amazon EC2 instance, you reference the logical IDs to associate the block stores with the instance. .PARAMETER Description The description of the constraint. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-servicecatalog-launchnotificationconstraint.html#cfn-servicecatalog-launchnotificationconstraint-description PrimitiveType: String UpdateType: Mutable .PARAMETER NotificationArns The notification ARNs. PrimitiveItemType: String Type: List Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-servicecatalog-launchnotificationconstraint.html#cfn-servicecatalog-launchnotificationconstraint-notificationarns UpdateType: Mutable .PARAMETER AcceptLanguage The language code. + en - English default + jp - Japanese + zh - Chinese Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-servicecatalog-launchnotificationconstraint.html#cfn-servicecatalog-launchnotificationconstraint-acceptlanguage PrimitiveType: String UpdateType: Mutable .PARAMETER PortfolioId The portfolio identifier. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-servicecatalog-launchnotificationconstraint.html#cfn-servicecatalog-launchnotificationconstraint-portfolioid PrimitiveType: String UpdateType: Immutable .PARAMETER ProductId The product identifier. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-servicecatalog-launchnotificationconstraint.html#cfn-servicecatalog-launchnotificationconstraint-productid PrimitiveType: String UpdateType: Immutable .PARAMETER DeletionPolicy With the DeletionPolicy attribute you can preserve or (in some cases) backup a resource when its stack is deleted. You specify a DeletionPolicy attribute for each resource that you want to control. If a resource has no DeletionPolicy attribute, AWS CloudFormation deletes the resource by default. To keep a resource when its stack is deleted, specify Retain for that resource. You can use retain for any resource. For example, you can retain a nested stack, S3 bucket, or EC2 instance so that you can continue to use or modify those resources after you delete their stacks. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER UpdateReplacePolicy Use the UpdateReplacePolicy attribute to retain or (in some cases) backup the existing physical instance of a resource when it is replaced during a stack update operation. When you initiate a stack update, AWS CloudFormation updates resources based on differences between what you submit and the stack's current template and parameters. If you update a resource property that requires that the resource be replaced, AWS CloudFormation recreates the resource during the update. Recreating the resource generates a new physical ID. AWS CloudFormation creates the replacement resource first, and then changes references from other dependent resources to point to the replacement resource. By default, AWS CloudFormation then deletes the old resource. Using the UpdateReplacePolicy, you can specify that AWS CloudFormation retain or (in some cases) create a snapshot of the old resource. For resources that support snapshots, such as AWS::EC2::Volume, specify Snapshot to have AWS CloudFormation create a snapshot before deleting the old resource instance. You can apply the UpdateReplacePolicy attribute to any resource. UpdateReplacePolicy is only executed if you update a resource property whose update behavior is specified as Replacement, thereby causing AWS CloudFormation to replace the old resource with a new one with a new physical ID. For example, if you update the Engine property of an AWS::RDS::DBInstance resource type, AWS CloudFormation creates a new resource and replaces the current DB instance resource with the new one. The UpdateReplacePolicy attribute would then dictate whether AWS CloudFormation deleted, retained, or created a snapshot of the old DB instance. The update behavior for each property of a resource is specified in the reference topic for that resource in the AWS Resource and Property Types Reference. For more information on resource update behavior, see Update Behaviors of Stack Resources. The UpdateReplacePolicy attribute applies to stack updates you perform directly, as well as stack updates performed using change sets. Note Resources that are retained continue to exist and continue to incur applicable charges until you delete those resources. Snapshots that are created with this policy continue to exist and continue to incur applicable charges until you delete those snapshots. UpdateReplacePolicy retains the old physical resource or snapshot, but removes it from AWS CloudFormation's scope. UpdateReplacePolicy differs from the DeletionPolicy attribute in that it only applies to resources replaced during stack updates. Use DeletionPolicy for resources deleted when a stack is deleted, or when the resource definition itself is deleted from the template as part of a stack update. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER DependsOn With the DependsOn attribute you can specify that the creation of a specific resource follows another. When you add a DependsOn attribute to a resource, that resource is created only after the creation of the resource specified in the DependsOn attribute. This parameter takes a string or list of strings representing Logical IDs of resources that must be created prior to this resource being created. .PARAMETER Metadata The Metadata attribute enables you to associate structured data with a resource. By adding a Metadata attribute to a resource, you can add data in JSON or YAML to the resource declaration. In addition, you can use intrinsic functions (such as GetAtt and Ref), parameters, and pseudo parameters within the Metadata attribute to add those interpreted values. This will be returned when describing the resource using AWS CLI. .PARAMETER UpdatePolicy Use the UpdatePolicy attribute to specify how AWS CloudFormation handles updates to the AWS::AutoScaling::AutoScalingGroup resource. AWS CloudFormation invokes one of three update policies depending on the type of change you make or whether a scheduled action is associated with the Auto Scaling group. You must use the "Add-UpdatePolicy" function or the [UpdatePolicy] class here. .PARAMETER Condition Logical ID of the condition that this resource needs to be true in order for this resource to be provisioned. .FUNCTIONALITY Vaporshell #> [OutputType([ServiceCatalogLaunchNotificationConstraint])] [cmdletbinding()] Param( [parameter(Mandatory = $true,Position = 0)] [ValidateLogicalId()] [string] $LogicalId, [parameter(Mandatory = $false)] [object] $Description, [parameter(Mandatory = $true)] $NotificationArns, [parameter(Mandatory = $false)] [object] $AcceptLanguage, [parameter(Mandatory = $true)] [object] $PortfolioId, [parameter(Mandatory = $true)] [object] $ProductId, [parameter()] [DeletionPolicy] $DeletionPolicy, [parameter()] [UpdateReplacePolicy] $UpdateReplacePolicy, [parameter(Mandatory = $false)] [string[]] $DependsOn, [parameter(Mandatory = $false)] [VSJson] $Metadata, [parameter(Mandatory = $false)] [UpdatePolicy] $UpdatePolicy, [parameter(Mandatory = $false)] [string] $Condition ) Process { $obj = [ServiceCatalogLaunchNotificationConstraint]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'New-VSServiceCatalogLaunchNotificationConstraint' function New-VSServiceCatalogLaunchRoleConstraint { <# .SYNOPSIS Adds an AWS::ServiceCatalog::LaunchRoleConstraint resource to the template. Specifies a launch constraint. .DESCRIPTION Adds an AWS::ServiceCatalog::LaunchRoleConstraint resource to the template. Specifies a launch constraint. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-servicecatalog-launchroleconstraint.html .PARAMETER LogicalId The logical ID must be alphanumeric (A-Za-z0-9) and unique within the template. Use the logical name to reference the resource in other parts of the template. For example, if you want to map an Amazon Elastic Block Store volume to an Amazon EC2 instance, you reference the logical IDs to associate the block stores with the instance. .PARAMETER Description The description of the constraint. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-servicecatalog-launchroleconstraint.html#cfn-servicecatalog-launchroleconstraint-description PrimitiveType: String UpdateType: Mutable .PARAMETER LocalRoleName You are required to specify either the RoleArn or the LocalRoleName but can't use both. If you specify the LocalRoleName property, when an account uses the launch constraint, the IAM role with that name in the account will be used. This allows launch-role constraints to be account-agnostic so the administrator can create fewer resources per shared account. The given role name must exist in the account used to create the launch constraint and the account of the user who launches a product with this launch constraint. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-servicecatalog-launchroleconstraint.html#cfn-servicecatalog-launchroleconstraint-localrolename PrimitiveType: String UpdateType: Mutable .PARAMETER AcceptLanguage The language code. + en - English default + jp - Japanese + zh - Chinese Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-servicecatalog-launchroleconstraint.html#cfn-servicecatalog-launchroleconstraint-acceptlanguage PrimitiveType: String UpdateType: Mutable .PARAMETER PortfolioId The portfolio identifier. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-servicecatalog-launchroleconstraint.html#cfn-servicecatalog-launchroleconstraint-portfolioid PrimitiveType: String UpdateType: Immutable .PARAMETER ProductId The product identifier. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-servicecatalog-launchroleconstraint.html#cfn-servicecatalog-launchroleconstraint-productid PrimitiveType: String UpdateType: Immutable .PARAMETER RoleArn The ARN of the launch role. You are required to specify RoleArn or LocalRoleName but can't use both. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-servicecatalog-launchroleconstraint.html#cfn-servicecatalog-launchroleconstraint-rolearn PrimitiveType: String UpdateType: Mutable .PARAMETER DeletionPolicy With the DeletionPolicy attribute you can preserve or (in some cases) backup a resource when its stack is deleted. You specify a DeletionPolicy attribute for each resource that you want to control. If a resource has no DeletionPolicy attribute, AWS CloudFormation deletes the resource by default. To keep a resource when its stack is deleted, specify Retain for that resource. You can use retain for any resource. For example, you can retain a nested stack, S3 bucket, or EC2 instance so that you can continue to use or modify those resources after you delete their stacks. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER UpdateReplacePolicy Use the UpdateReplacePolicy attribute to retain or (in some cases) backup the existing physical instance of a resource when it is replaced during a stack update operation. When you initiate a stack update, AWS CloudFormation updates resources based on differences between what you submit and the stack's current template and parameters. If you update a resource property that requires that the resource be replaced, AWS CloudFormation recreates the resource during the update. Recreating the resource generates a new physical ID. AWS CloudFormation creates the replacement resource first, and then changes references from other dependent resources to point to the replacement resource. By default, AWS CloudFormation then deletes the old resource. Using the UpdateReplacePolicy, you can specify that AWS CloudFormation retain or (in some cases) create a snapshot of the old resource. For resources that support snapshots, such as AWS::EC2::Volume, specify Snapshot to have AWS CloudFormation create a snapshot before deleting the old resource instance. You can apply the UpdateReplacePolicy attribute to any resource. UpdateReplacePolicy is only executed if you update a resource property whose update behavior is specified as Replacement, thereby causing AWS CloudFormation to replace the old resource with a new one with a new physical ID. For example, if you update the Engine property of an AWS::RDS::DBInstance resource type, AWS CloudFormation creates a new resource and replaces the current DB instance resource with the new one. The UpdateReplacePolicy attribute would then dictate whether AWS CloudFormation deleted, retained, or created a snapshot of the old DB instance. The update behavior for each property of a resource is specified in the reference topic for that resource in the AWS Resource and Property Types Reference. For more information on resource update behavior, see Update Behaviors of Stack Resources. The UpdateReplacePolicy attribute applies to stack updates you perform directly, as well as stack updates performed using change sets. Note Resources that are retained continue to exist and continue to incur applicable charges until you delete those resources. Snapshots that are created with this policy continue to exist and continue to incur applicable charges until you delete those snapshots. UpdateReplacePolicy retains the old physical resource or snapshot, but removes it from AWS CloudFormation's scope. UpdateReplacePolicy differs from the DeletionPolicy attribute in that it only applies to resources replaced during stack updates. Use DeletionPolicy for resources deleted when a stack is deleted, or when the resource definition itself is deleted from the template as part of a stack update. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER DependsOn With the DependsOn attribute you can specify that the creation of a specific resource follows another. When you add a DependsOn attribute to a resource, that resource is created only after the creation of the resource specified in the DependsOn attribute. This parameter takes a string or list of strings representing Logical IDs of resources that must be created prior to this resource being created. .PARAMETER Metadata The Metadata attribute enables you to associate structured data with a resource. By adding a Metadata attribute to a resource, you can add data in JSON or YAML to the resource declaration. In addition, you can use intrinsic functions (such as GetAtt and Ref), parameters, and pseudo parameters within the Metadata attribute to add those interpreted values. This will be returned when describing the resource using AWS CLI. .PARAMETER UpdatePolicy Use the UpdatePolicy attribute to specify how AWS CloudFormation handles updates to the AWS::AutoScaling::AutoScalingGroup resource. AWS CloudFormation invokes one of three update policies depending on the type of change you make or whether a scheduled action is associated with the Auto Scaling group. You must use the "Add-UpdatePolicy" function or the [UpdatePolicy] class here. .PARAMETER Condition Logical ID of the condition that this resource needs to be true in order for this resource to be provisioned. .FUNCTIONALITY Vaporshell #> [OutputType([ServiceCatalogLaunchRoleConstraint])] [cmdletbinding()] Param( [parameter(Mandatory = $true,Position = 0)] [ValidateLogicalId()] [string] $LogicalId, [parameter(Mandatory = $false)] [object] $Description, [parameter(Mandatory = $false)] [object] $LocalRoleName, [parameter(Mandatory = $false)] [object] $AcceptLanguage, [parameter(Mandatory = $true)] [object] $PortfolioId, [parameter(Mandatory = $true)] [object] $ProductId, [parameter(Mandatory = $false)] [object] $RoleArn, [parameter()] [DeletionPolicy] $DeletionPolicy, [parameter()] [UpdateReplacePolicy] $UpdateReplacePolicy, [parameter(Mandatory = $false)] [string[]] $DependsOn, [parameter(Mandatory = $false)] [VSJson] $Metadata, [parameter(Mandatory = $false)] [UpdatePolicy] $UpdatePolicy, [parameter(Mandatory = $false)] [string] $Condition ) Process { $obj = [ServiceCatalogLaunchRoleConstraint]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'New-VSServiceCatalogLaunchRoleConstraint' function New-VSServiceCatalogLaunchTemplateConstraint { <# .SYNOPSIS Adds an AWS::ServiceCatalog::LaunchTemplateConstraint resource to the template. Specifies a template constraint. .DESCRIPTION Adds an AWS::ServiceCatalog::LaunchTemplateConstraint resource to the template. Specifies a template constraint. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-servicecatalog-launchtemplateconstraint.html .PARAMETER LogicalId The logical ID must be alphanumeric (A-Za-z0-9) and unique within the template. Use the logical name to reference the resource in other parts of the template. For example, if you want to map an Amazon Elastic Block Store volume to an Amazon EC2 instance, you reference the logical IDs to associate the block stores with the instance. .PARAMETER Description The description of the constraint. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-servicecatalog-launchtemplateconstraint.html#cfn-servicecatalog-launchtemplateconstraint-description PrimitiveType: String UpdateType: Mutable .PARAMETER AcceptLanguage The language code. + en - English default + jp - Japanese + zh - Chinese Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-servicecatalog-launchtemplateconstraint.html#cfn-servicecatalog-launchtemplateconstraint-acceptlanguage PrimitiveType: String UpdateType: Mutable .PARAMETER PortfolioId The portfolio identifier. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-servicecatalog-launchtemplateconstraint.html#cfn-servicecatalog-launchtemplateconstraint-portfolioid PrimitiveType: String UpdateType: Immutable .PARAMETER ProductId The product identifier. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-servicecatalog-launchtemplateconstraint.html#cfn-servicecatalog-launchtemplateconstraint-productid PrimitiveType: String UpdateType: Immutable .PARAMETER Rules The constraint rules. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-servicecatalog-launchtemplateconstraint.html#cfn-servicecatalog-launchtemplateconstraint-rules PrimitiveType: String UpdateType: Mutable .PARAMETER DeletionPolicy With the DeletionPolicy attribute you can preserve or (in some cases) backup a resource when its stack is deleted. You specify a DeletionPolicy attribute for each resource that you want to control. If a resource has no DeletionPolicy attribute, AWS CloudFormation deletes the resource by default. To keep a resource when its stack is deleted, specify Retain for that resource. You can use retain for any resource. For example, you can retain a nested stack, S3 bucket, or EC2 instance so that you can continue to use or modify those resources after you delete their stacks. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER UpdateReplacePolicy Use the UpdateReplacePolicy attribute to retain or (in some cases) backup the existing physical instance of a resource when it is replaced during a stack update operation. When you initiate a stack update, AWS CloudFormation updates resources based on differences between what you submit and the stack's current template and parameters. If you update a resource property that requires that the resource be replaced, AWS CloudFormation recreates the resource during the update. Recreating the resource generates a new physical ID. AWS CloudFormation creates the replacement resource first, and then changes references from other dependent resources to point to the replacement resource. By default, AWS CloudFormation then deletes the old resource. Using the UpdateReplacePolicy, you can specify that AWS CloudFormation retain or (in some cases) create a snapshot of the old resource. For resources that support snapshots, such as AWS::EC2::Volume, specify Snapshot to have AWS CloudFormation create a snapshot before deleting the old resource instance. You can apply the UpdateReplacePolicy attribute to any resource. UpdateReplacePolicy is only executed if you update a resource property whose update behavior is specified as Replacement, thereby causing AWS CloudFormation to replace the old resource with a new one with a new physical ID. For example, if you update the Engine property of an AWS::RDS::DBInstance resource type, AWS CloudFormation creates a new resource and replaces the current DB instance resource with the new one. The UpdateReplacePolicy attribute would then dictate whether AWS CloudFormation deleted, retained, or created a snapshot of the old DB instance. The update behavior for each property of a resource is specified in the reference topic for that resource in the AWS Resource and Property Types Reference. For more information on resource update behavior, see Update Behaviors of Stack Resources. The UpdateReplacePolicy attribute applies to stack updates you perform directly, as well as stack updates performed using change sets. Note Resources that are retained continue to exist and continue to incur applicable charges until you delete those resources. Snapshots that are created with this policy continue to exist and continue to incur applicable charges until you delete those snapshots. UpdateReplacePolicy retains the old physical resource or snapshot, but removes it from AWS CloudFormation's scope. UpdateReplacePolicy differs from the DeletionPolicy attribute in that it only applies to resources replaced during stack updates. Use DeletionPolicy for resources deleted when a stack is deleted, or when the resource definition itself is deleted from the template as part of a stack update. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER DependsOn With the DependsOn attribute you can specify that the creation of a specific resource follows another. When you add a DependsOn attribute to a resource, that resource is created only after the creation of the resource specified in the DependsOn attribute. This parameter takes a string or list of strings representing Logical IDs of resources that must be created prior to this resource being created. .PARAMETER Metadata The Metadata attribute enables you to associate structured data with a resource. By adding a Metadata attribute to a resource, you can add data in JSON or YAML to the resource declaration. In addition, you can use intrinsic functions (such as GetAtt and Ref), parameters, and pseudo parameters within the Metadata attribute to add those interpreted values. This will be returned when describing the resource using AWS CLI. .PARAMETER UpdatePolicy Use the UpdatePolicy attribute to specify how AWS CloudFormation handles updates to the AWS::AutoScaling::AutoScalingGroup resource. AWS CloudFormation invokes one of three update policies depending on the type of change you make or whether a scheduled action is associated with the Auto Scaling group. You must use the "Add-UpdatePolicy" function or the [UpdatePolicy] class here. .PARAMETER Condition Logical ID of the condition that this resource needs to be true in order for this resource to be provisioned. .FUNCTIONALITY Vaporshell #> [OutputType([ServiceCatalogLaunchTemplateConstraint])] [cmdletbinding()] Param( [parameter(Mandatory = $true,Position = 0)] [ValidateLogicalId()] [string] $LogicalId, [parameter(Mandatory = $false)] [object] $Description, [parameter(Mandatory = $false)] [object] $AcceptLanguage, [parameter(Mandatory = $true)] [object] $PortfolioId, [parameter(Mandatory = $true)] [object] $ProductId, [parameter(Mandatory = $true)] [object] $Rules, [parameter()] [DeletionPolicy] $DeletionPolicy, [parameter()] [UpdateReplacePolicy] $UpdateReplacePolicy, [parameter(Mandatory = $false)] [string[]] $DependsOn, [parameter(Mandatory = $false)] [VSJson] $Metadata, [parameter(Mandatory = $false)] [UpdatePolicy] $UpdatePolicy, [parameter(Mandatory = $false)] [string] $Condition ) Process { $obj = [ServiceCatalogLaunchTemplateConstraint]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'New-VSServiceCatalogLaunchTemplateConstraint' function New-VSServiceCatalogPortfolio { <# .SYNOPSIS Adds an AWS::ServiceCatalog::Portfolio resource to the template. Specifies a portfolio. .DESCRIPTION Adds an AWS::ServiceCatalog::Portfolio resource to the template. Specifies a portfolio. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-servicecatalog-portfolio.html .PARAMETER LogicalId The logical ID must be alphanumeric (A-Za-z0-9) and unique within the template. Use the logical name to reference the resource in other parts of the template. For example, if you want to map an Amazon Elastic Block Store volume to an Amazon EC2 instance, you reference the logical IDs to associate the block stores with the instance. .PARAMETER ProviderName The name of the portfolio provider. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-servicecatalog-portfolio.html#cfn-servicecatalog-portfolio-providername PrimitiveType: String UpdateType: Mutable .PARAMETER Description The description of the portfolio. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-servicecatalog-portfolio.html#cfn-servicecatalog-portfolio-description PrimitiveType: String UpdateType: Mutable .PARAMETER DisplayName The name to use for display purposes. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-servicecatalog-portfolio.html#cfn-servicecatalog-portfolio-displayname PrimitiveType: String UpdateType: Mutable .PARAMETER AcceptLanguage The language code. + en - English default + jp - Japanese + zh - Chinese Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-servicecatalog-portfolio.html#cfn-servicecatalog-portfolio-acceptlanguage PrimitiveType: String UpdateType: Mutable .PARAMETER Tags One or more tags. Type: List Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-servicecatalog-portfolio.html#cfn-servicecatalog-portfolio-tags ItemType: Tag UpdateType: Mutable .PARAMETER DeletionPolicy With the DeletionPolicy attribute you can preserve or (in some cases) backup a resource when its stack is deleted. You specify a DeletionPolicy attribute for each resource that you want to control. If a resource has no DeletionPolicy attribute, AWS CloudFormation deletes the resource by default. To keep a resource when its stack is deleted, specify Retain for that resource. You can use retain for any resource. For example, you can retain a nested stack, S3 bucket, or EC2 instance so that you can continue to use or modify those resources after you delete their stacks. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER UpdateReplacePolicy Use the UpdateReplacePolicy attribute to retain or (in some cases) backup the existing physical instance of a resource when it is replaced during a stack update operation. When you initiate a stack update, AWS CloudFormation updates resources based on differences between what you submit and the stack's current template and parameters. If you update a resource property that requires that the resource be replaced, AWS CloudFormation recreates the resource during the update. Recreating the resource generates a new physical ID. AWS CloudFormation creates the replacement resource first, and then changes references from other dependent resources to point to the replacement resource. By default, AWS CloudFormation then deletes the old resource. Using the UpdateReplacePolicy, you can specify that AWS CloudFormation retain or (in some cases) create a snapshot of the old resource. For resources that support snapshots, such as AWS::EC2::Volume, specify Snapshot to have AWS CloudFormation create a snapshot before deleting the old resource instance. You can apply the UpdateReplacePolicy attribute to any resource. UpdateReplacePolicy is only executed if you update a resource property whose update behavior is specified as Replacement, thereby causing AWS CloudFormation to replace the old resource with a new one with a new physical ID. For example, if you update the Engine property of an AWS::RDS::DBInstance resource type, AWS CloudFormation creates a new resource and replaces the current DB instance resource with the new one. The UpdateReplacePolicy attribute would then dictate whether AWS CloudFormation deleted, retained, or created a snapshot of the old DB instance. The update behavior for each property of a resource is specified in the reference topic for that resource in the AWS Resource and Property Types Reference. For more information on resource update behavior, see Update Behaviors of Stack Resources. The UpdateReplacePolicy attribute applies to stack updates you perform directly, as well as stack updates performed using change sets. Note Resources that are retained continue to exist and continue to incur applicable charges until you delete those resources. Snapshots that are created with this policy continue to exist and continue to incur applicable charges until you delete those snapshots. UpdateReplacePolicy retains the old physical resource or snapshot, but removes it from AWS CloudFormation's scope. UpdateReplacePolicy differs from the DeletionPolicy attribute in that it only applies to resources replaced during stack updates. Use DeletionPolicy for resources deleted when a stack is deleted, or when the resource definition itself is deleted from the template as part of a stack update. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER DependsOn With the DependsOn attribute you can specify that the creation of a specific resource follows another. When you add a DependsOn attribute to a resource, that resource is created only after the creation of the resource specified in the DependsOn attribute. This parameter takes a string or list of strings representing Logical IDs of resources that must be created prior to this resource being created. .PARAMETER Metadata The Metadata attribute enables you to associate structured data with a resource. By adding a Metadata attribute to a resource, you can add data in JSON or YAML to the resource declaration. In addition, you can use intrinsic functions (such as GetAtt and Ref), parameters, and pseudo parameters within the Metadata attribute to add those interpreted values. This will be returned when describing the resource using AWS CLI. .PARAMETER UpdatePolicy Use the UpdatePolicy attribute to specify how AWS CloudFormation handles updates to the AWS::AutoScaling::AutoScalingGroup resource. AWS CloudFormation invokes one of three update policies depending on the type of change you make or whether a scheduled action is associated with the Auto Scaling group. You must use the "Add-UpdatePolicy" function or the [UpdatePolicy] class here. .PARAMETER Condition Logical ID of the condition that this resource needs to be true in order for this resource to be provisioned. .FUNCTIONALITY Vaporshell #> [OutputType([ServiceCatalogPortfolio])] [cmdletbinding()] Param( [parameter(Mandatory = $true,Position = 0)] [ValidateLogicalId()] [string] $LogicalId, [parameter(Mandatory = $true)] [object] $ProviderName, [parameter(Mandatory = $false)] [object] $Description, [parameter(Mandatory = $true)] [object] $DisplayName, [parameter(Mandatory = $false)] [object] $AcceptLanguage, [TransformTag()] [object] [parameter(Mandatory = $false)] $Tags, [parameter()] [DeletionPolicy] $DeletionPolicy, [parameter()] [UpdateReplacePolicy] $UpdateReplacePolicy, [parameter(Mandatory = $false)] [string[]] $DependsOn, [parameter(Mandatory = $false)] [VSJson] $Metadata, [parameter(Mandatory = $false)] [UpdatePolicy] $UpdatePolicy, [parameter(Mandatory = $false)] [string] $Condition ) Process { $obj = [ServiceCatalogPortfolio]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'New-VSServiceCatalogPortfolio' function New-VSServiceCatalogPortfolioPrincipalAssociation { <# .SYNOPSIS Adds an AWS::ServiceCatalog::PortfolioPrincipalAssociation resource to the template. Associates the specified principal ARN with the specified portfolio. .DESCRIPTION Adds an AWS::ServiceCatalog::PortfolioPrincipalAssociation resource to the template. Associates the specified principal ARN with the specified portfolio. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-servicecatalog-portfolioprincipalassociation.html .PARAMETER LogicalId The logical ID must be alphanumeric (A-Za-z0-9) and unique within the template. Use the logical name to reference the resource in other parts of the template. For example, if you want to map an Amazon Elastic Block Store volume to an Amazon EC2 instance, you reference the logical IDs to associate the block stores with the instance. .PARAMETER PrincipalARN The ARN of the principal IAM user, role, or group. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-servicecatalog-portfolioprincipalassociation.html#cfn-servicecatalog-portfolioprincipalassociation-principalarn PrimitiveType: String UpdateType: Immutable .PARAMETER AcceptLanguage The language code. + en - English default + jp - Japanese + zh - Chinese Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-servicecatalog-portfolioprincipalassociation.html#cfn-servicecatalog-portfolioprincipalassociation-acceptlanguage PrimitiveType: String UpdateType: Immutable .PARAMETER PortfolioId The portfolio identifier. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-servicecatalog-portfolioprincipalassociation.html#cfn-servicecatalog-portfolioprincipalassociation-portfolioid PrimitiveType: String UpdateType: Immutable .PARAMETER PrincipalType The principal type. The supported value is IAM. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-servicecatalog-portfolioprincipalassociation.html#cfn-servicecatalog-portfolioprincipalassociation-principaltype PrimitiveType: String UpdateType: Immutable .PARAMETER DeletionPolicy With the DeletionPolicy attribute you can preserve or (in some cases) backup a resource when its stack is deleted. You specify a DeletionPolicy attribute for each resource that you want to control. If a resource has no DeletionPolicy attribute, AWS CloudFormation deletes the resource by default. To keep a resource when its stack is deleted, specify Retain for that resource. You can use retain for any resource. For example, you can retain a nested stack, S3 bucket, or EC2 instance so that you can continue to use or modify those resources after you delete their stacks. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER UpdateReplacePolicy Use the UpdateReplacePolicy attribute to retain or (in some cases) backup the existing physical instance of a resource when it is replaced during a stack update operation. When you initiate a stack update, AWS CloudFormation updates resources based on differences between what you submit and the stack's current template and parameters. If you update a resource property that requires that the resource be replaced, AWS CloudFormation recreates the resource during the update. Recreating the resource generates a new physical ID. AWS CloudFormation creates the replacement resource first, and then changes references from other dependent resources to point to the replacement resource. By default, AWS CloudFormation then deletes the old resource. Using the UpdateReplacePolicy, you can specify that AWS CloudFormation retain or (in some cases) create a snapshot of the old resource. For resources that support snapshots, such as AWS::EC2::Volume, specify Snapshot to have AWS CloudFormation create a snapshot before deleting the old resource instance. You can apply the UpdateReplacePolicy attribute to any resource. UpdateReplacePolicy is only executed if you update a resource property whose update behavior is specified as Replacement, thereby causing AWS CloudFormation to replace the old resource with a new one with a new physical ID. For example, if you update the Engine property of an AWS::RDS::DBInstance resource type, AWS CloudFormation creates a new resource and replaces the current DB instance resource with the new one. The UpdateReplacePolicy attribute would then dictate whether AWS CloudFormation deleted, retained, or created a snapshot of the old DB instance. The update behavior for each property of a resource is specified in the reference topic for that resource in the AWS Resource and Property Types Reference. For more information on resource update behavior, see Update Behaviors of Stack Resources. The UpdateReplacePolicy attribute applies to stack updates you perform directly, as well as stack updates performed using change sets. Note Resources that are retained continue to exist and continue to incur applicable charges until you delete those resources. Snapshots that are created with this policy continue to exist and continue to incur applicable charges until you delete those snapshots. UpdateReplacePolicy retains the old physical resource or snapshot, but removes it from AWS CloudFormation's scope. UpdateReplacePolicy differs from the DeletionPolicy attribute in that it only applies to resources replaced during stack updates. Use DeletionPolicy for resources deleted when a stack is deleted, or when the resource definition itself is deleted from the template as part of a stack update. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER DependsOn With the DependsOn attribute you can specify that the creation of a specific resource follows another. When you add a DependsOn attribute to a resource, that resource is created only after the creation of the resource specified in the DependsOn attribute. This parameter takes a string or list of strings representing Logical IDs of resources that must be created prior to this resource being created. .PARAMETER Metadata The Metadata attribute enables you to associate structured data with a resource. By adding a Metadata attribute to a resource, you can add data in JSON or YAML to the resource declaration. In addition, you can use intrinsic functions (such as GetAtt and Ref), parameters, and pseudo parameters within the Metadata attribute to add those interpreted values. This will be returned when describing the resource using AWS CLI. .PARAMETER UpdatePolicy Use the UpdatePolicy attribute to specify how AWS CloudFormation handles updates to the AWS::AutoScaling::AutoScalingGroup resource. AWS CloudFormation invokes one of three update policies depending on the type of change you make or whether a scheduled action is associated with the Auto Scaling group. You must use the "Add-UpdatePolicy" function or the [UpdatePolicy] class here. .PARAMETER Condition Logical ID of the condition that this resource needs to be true in order for this resource to be provisioned. .FUNCTIONALITY Vaporshell #> [OutputType([ServiceCatalogPortfolioPrincipalAssociation])] [cmdletbinding()] Param( [parameter(Mandatory = $true,Position = 0)] [ValidateLogicalId()] [string] $LogicalId, [parameter(Mandatory = $true)] [object] $PrincipalARN, [parameter(Mandatory = $false)] [object] $AcceptLanguage, [parameter(Mandatory = $true)] [object] $PortfolioId, [parameter(Mandatory = $true)] [object] $PrincipalType, [parameter()] [DeletionPolicy] $DeletionPolicy, [parameter()] [UpdateReplacePolicy] $UpdateReplacePolicy, [parameter(Mandatory = $false)] [string[]] $DependsOn, [parameter(Mandatory = $false)] [VSJson] $Metadata, [parameter(Mandatory = $false)] [UpdatePolicy] $UpdatePolicy, [parameter(Mandatory = $false)] [string] $Condition ) Process { $obj = [ServiceCatalogPortfolioPrincipalAssociation]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'New-VSServiceCatalogPortfolioPrincipalAssociation' function New-VSServiceCatalogPortfolioProductAssociation { <# .SYNOPSIS Adds an AWS::ServiceCatalog::PortfolioProductAssociation resource to the template. Associates the specified product with the specified portfolio. .DESCRIPTION Adds an AWS::ServiceCatalog::PortfolioProductAssociation resource to the template. Associates the specified product with the specified portfolio. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-servicecatalog-portfolioproductassociation.html .PARAMETER LogicalId The logical ID must be alphanumeric (A-Za-z0-9) and unique within the template. Use the logical name to reference the resource in other parts of the template. For example, if you want to map an Amazon Elastic Block Store volume to an Amazon EC2 instance, you reference the logical IDs to associate the block stores with the instance. .PARAMETER SourcePortfolioId The identifier of the source portfolio. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-servicecatalog-portfolioproductassociation.html#cfn-servicecatalog-portfolioproductassociation-sourceportfolioid PrimitiveType: String UpdateType: Immutable .PARAMETER AcceptLanguage The language code. + en - English default + jp - Japanese + zh - Chinese Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-servicecatalog-portfolioproductassociation.html#cfn-servicecatalog-portfolioproductassociation-acceptlanguage PrimitiveType: String UpdateType: Immutable .PARAMETER PortfolioId The portfolio identifier. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-servicecatalog-portfolioproductassociation.html#cfn-servicecatalog-portfolioproductassociation-portfolioid PrimitiveType: String UpdateType: Immutable .PARAMETER ProductId The product identifier. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-servicecatalog-portfolioproductassociation.html#cfn-servicecatalog-portfolioproductassociation-productid PrimitiveType: String UpdateType: Immutable .PARAMETER DeletionPolicy With the DeletionPolicy attribute you can preserve or (in some cases) backup a resource when its stack is deleted. You specify a DeletionPolicy attribute for each resource that you want to control. If a resource has no DeletionPolicy attribute, AWS CloudFormation deletes the resource by default. To keep a resource when its stack is deleted, specify Retain for that resource. You can use retain for any resource. For example, you can retain a nested stack, S3 bucket, or EC2 instance so that you can continue to use or modify those resources after you delete their stacks. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER UpdateReplacePolicy Use the UpdateReplacePolicy attribute to retain or (in some cases) backup the existing physical instance of a resource when it is replaced during a stack update operation. When you initiate a stack update, AWS CloudFormation updates resources based on differences between what you submit and the stack's current template and parameters. If you update a resource property that requires that the resource be replaced, AWS CloudFormation recreates the resource during the update. Recreating the resource generates a new physical ID. AWS CloudFormation creates the replacement resource first, and then changes references from other dependent resources to point to the replacement resource. By default, AWS CloudFormation then deletes the old resource. Using the UpdateReplacePolicy, you can specify that AWS CloudFormation retain or (in some cases) create a snapshot of the old resource. For resources that support snapshots, such as AWS::EC2::Volume, specify Snapshot to have AWS CloudFormation create a snapshot before deleting the old resource instance. You can apply the UpdateReplacePolicy attribute to any resource. UpdateReplacePolicy is only executed if you update a resource property whose update behavior is specified as Replacement, thereby causing AWS CloudFormation to replace the old resource with a new one with a new physical ID. For example, if you update the Engine property of an AWS::RDS::DBInstance resource type, AWS CloudFormation creates a new resource and replaces the current DB instance resource with the new one. The UpdateReplacePolicy attribute would then dictate whether AWS CloudFormation deleted, retained, or created a snapshot of the old DB instance. The update behavior for each property of a resource is specified in the reference topic for that resource in the AWS Resource and Property Types Reference. For more information on resource update behavior, see Update Behaviors of Stack Resources. The UpdateReplacePolicy attribute applies to stack updates you perform directly, as well as stack updates performed using change sets. Note Resources that are retained continue to exist and continue to incur applicable charges until you delete those resources. Snapshots that are created with this policy continue to exist and continue to incur applicable charges until you delete those snapshots. UpdateReplacePolicy retains the old physical resource or snapshot, but removes it from AWS CloudFormation's scope. UpdateReplacePolicy differs from the DeletionPolicy attribute in that it only applies to resources replaced during stack updates. Use DeletionPolicy for resources deleted when a stack is deleted, or when the resource definition itself is deleted from the template as part of a stack update. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER DependsOn With the DependsOn attribute you can specify that the creation of a specific resource follows another. When you add a DependsOn attribute to a resource, that resource is created only after the creation of the resource specified in the DependsOn attribute. This parameter takes a string or list of strings representing Logical IDs of resources that must be created prior to this resource being created. .PARAMETER Metadata The Metadata attribute enables you to associate structured data with a resource. By adding a Metadata attribute to a resource, you can add data in JSON or YAML to the resource declaration. In addition, you can use intrinsic functions (such as GetAtt and Ref), parameters, and pseudo parameters within the Metadata attribute to add those interpreted values. This will be returned when describing the resource using AWS CLI. .PARAMETER UpdatePolicy Use the UpdatePolicy attribute to specify how AWS CloudFormation handles updates to the AWS::AutoScaling::AutoScalingGroup resource. AWS CloudFormation invokes one of three update policies depending on the type of change you make or whether a scheduled action is associated with the Auto Scaling group. You must use the "Add-UpdatePolicy" function or the [UpdatePolicy] class here. .PARAMETER Condition Logical ID of the condition that this resource needs to be true in order for this resource to be provisioned. .FUNCTIONALITY Vaporshell #> [OutputType([ServiceCatalogPortfolioProductAssociation])] [cmdletbinding()] Param( [parameter(Mandatory = $true,Position = 0)] [ValidateLogicalId()] [string] $LogicalId, [parameter(Mandatory = $false)] [object] $SourcePortfolioId, [parameter(Mandatory = $false)] [object] $AcceptLanguage, [parameter(Mandatory = $true)] [object] $PortfolioId, [parameter(Mandatory = $true)] [object] $ProductId, [parameter()] [DeletionPolicy] $DeletionPolicy, [parameter()] [UpdateReplacePolicy] $UpdateReplacePolicy, [parameter(Mandatory = $false)] [string[]] $DependsOn, [parameter(Mandatory = $false)] [VSJson] $Metadata, [parameter(Mandatory = $false)] [UpdatePolicy] $UpdatePolicy, [parameter(Mandatory = $false)] [string] $Condition ) Process { $obj = [ServiceCatalogPortfolioProductAssociation]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'New-VSServiceCatalogPortfolioProductAssociation' function New-VSServiceCatalogPortfolioShare { <# .SYNOPSIS Adds an AWS::ServiceCatalog::PortfolioShare resource to the template. Shares the specified portfolio with the specified account. .DESCRIPTION Adds an AWS::ServiceCatalog::PortfolioShare resource to the template. Shares the specified portfolio with the specified account. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-servicecatalog-portfolioshare.html .PARAMETER LogicalId The logical ID must be alphanumeric (A-Za-z0-9) and unique within the template. Use the logical name to reference the resource in other parts of the template. For example, if you want to map an Amazon Elastic Block Store volume to an Amazon EC2 instance, you reference the logical IDs to associate the block stores with the instance. .PARAMETER AccountId The AWS account ID. For example, 123456789012. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-servicecatalog-portfolioshare.html#cfn-servicecatalog-portfolioshare-accountid PrimitiveType: String UpdateType: Immutable .PARAMETER AcceptLanguage The language code. + en - English default + jp - Japanese + zh - Chinese Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-servicecatalog-portfolioshare.html#cfn-servicecatalog-portfolioshare-acceptlanguage PrimitiveType: String UpdateType: Immutable .PARAMETER PortfolioId The portfolio identifier. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-servicecatalog-portfolioshare.html#cfn-servicecatalog-portfolioshare-portfolioid PrimitiveType: String UpdateType: Immutable .PARAMETER DeletionPolicy With the DeletionPolicy attribute you can preserve or (in some cases) backup a resource when its stack is deleted. You specify a DeletionPolicy attribute for each resource that you want to control. If a resource has no DeletionPolicy attribute, AWS CloudFormation deletes the resource by default. To keep a resource when its stack is deleted, specify Retain for that resource. You can use retain for any resource. For example, you can retain a nested stack, S3 bucket, or EC2 instance so that you can continue to use or modify those resources after you delete their stacks. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER UpdateReplacePolicy Use the UpdateReplacePolicy attribute to retain or (in some cases) backup the existing physical instance of a resource when it is replaced during a stack update operation. When you initiate a stack update, AWS CloudFormation updates resources based on differences between what you submit and the stack's current template and parameters. If you update a resource property that requires that the resource be replaced, AWS CloudFormation recreates the resource during the update. Recreating the resource generates a new physical ID. AWS CloudFormation creates the replacement resource first, and then changes references from other dependent resources to point to the replacement resource. By default, AWS CloudFormation then deletes the old resource. Using the UpdateReplacePolicy, you can specify that AWS CloudFormation retain or (in some cases) create a snapshot of the old resource. For resources that support snapshots, such as AWS::EC2::Volume, specify Snapshot to have AWS CloudFormation create a snapshot before deleting the old resource instance. You can apply the UpdateReplacePolicy attribute to any resource. UpdateReplacePolicy is only executed if you update a resource property whose update behavior is specified as Replacement, thereby causing AWS CloudFormation to replace the old resource with a new one with a new physical ID. For example, if you update the Engine property of an AWS::RDS::DBInstance resource type, AWS CloudFormation creates a new resource and replaces the current DB instance resource with the new one. The UpdateReplacePolicy attribute would then dictate whether AWS CloudFormation deleted, retained, or created a snapshot of the old DB instance. The update behavior for each property of a resource is specified in the reference topic for that resource in the AWS Resource and Property Types Reference. For more information on resource update behavior, see Update Behaviors of Stack Resources. The UpdateReplacePolicy attribute applies to stack updates you perform directly, as well as stack updates performed using change sets. Note Resources that are retained continue to exist and continue to incur applicable charges until you delete those resources. Snapshots that are created with this policy continue to exist and continue to incur applicable charges until you delete those snapshots. UpdateReplacePolicy retains the old physical resource or snapshot, but removes it from AWS CloudFormation's scope. UpdateReplacePolicy differs from the DeletionPolicy attribute in that it only applies to resources replaced during stack updates. Use DeletionPolicy for resources deleted when a stack is deleted, or when the resource definition itself is deleted from the template as part of a stack update. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER DependsOn With the DependsOn attribute you can specify that the creation of a specific resource follows another. When you add a DependsOn attribute to a resource, that resource is created only after the creation of the resource specified in the DependsOn attribute. This parameter takes a string or list of strings representing Logical IDs of resources that must be created prior to this resource being created. .PARAMETER Metadata The Metadata attribute enables you to associate structured data with a resource. By adding a Metadata attribute to a resource, you can add data in JSON or YAML to the resource declaration. In addition, you can use intrinsic functions (such as GetAtt and Ref), parameters, and pseudo parameters within the Metadata attribute to add those interpreted values. This will be returned when describing the resource using AWS CLI. .PARAMETER UpdatePolicy Use the UpdatePolicy attribute to specify how AWS CloudFormation handles updates to the AWS::AutoScaling::AutoScalingGroup resource. AWS CloudFormation invokes one of three update policies depending on the type of change you make or whether a scheduled action is associated with the Auto Scaling group. You must use the "Add-UpdatePolicy" function or the [UpdatePolicy] class here. .PARAMETER Condition Logical ID of the condition that this resource needs to be true in order for this resource to be provisioned. .FUNCTIONALITY Vaporshell #> [OutputType([ServiceCatalogPortfolioShare])] [cmdletbinding()] Param( [parameter(Mandatory = $true,Position = 0)] [ValidateLogicalId()] [string] $LogicalId, [parameter(Mandatory = $true)] [object] $AccountId, [parameter(Mandatory = $false)] [object] $AcceptLanguage, [parameter(Mandatory = $true)] [object] $PortfolioId, [parameter()] [DeletionPolicy] $DeletionPolicy, [parameter()] [UpdateReplacePolicy] $UpdateReplacePolicy, [parameter(Mandatory = $false)] [string[]] $DependsOn, [parameter(Mandatory = $false)] [VSJson] $Metadata, [parameter(Mandatory = $false)] [UpdatePolicy] $UpdatePolicy, [parameter(Mandatory = $false)] [string] $Condition ) Process { $obj = [ServiceCatalogPortfolioShare]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'New-VSServiceCatalogPortfolioShare' function New-VSServiceCatalogResourceUpdateConstraint { <# .SYNOPSIS Adds an AWS::ServiceCatalog::ResourceUpdateConstraint resource to the template. Specifies a RESOURCE_UPDATE constraint. .DESCRIPTION Adds an AWS::ServiceCatalog::ResourceUpdateConstraint resource to the template. Specifies a RESOURCE_UPDATE constraint. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-servicecatalog-resourceupdateconstraint.html .PARAMETER LogicalId The logical ID must be alphanumeric (A-Za-z0-9) and unique within the template. Use the logical name to reference the resource in other parts of the template. For example, if you want to map an Amazon Elastic Block Store volume to an Amazon EC2 instance, you reference the logical IDs to associate the block stores with the instance. .PARAMETER Description The description of the constraint. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-servicecatalog-resourceupdateconstraint.html#cfn-servicecatalog-resourceupdateconstraint-description PrimitiveType: String UpdateType: Mutable .PARAMETER AcceptLanguage The language code. + en - English default + jp - Japanese + zh - Chinese Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-servicecatalog-resourceupdateconstraint.html#cfn-servicecatalog-resourceupdateconstraint-acceptlanguage PrimitiveType: String UpdateType: Mutable .PARAMETER TagUpdateOnProvisionedProduct If set to ALLOWED, lets users change tags in a CloudFormationProvisionedProduct: https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-servicecatalog-cloudformationprovisionedproduct.html resource. If set to NOT_ALLOWED, prevents users from changing tags in a CloudFormationProvisionedProduct: https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-servicecatalog-cloudformationprovisionedproduct.html resource. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-servicecatalog-resourceupdateconstraint.html#cfn-servicecatalog-resourceupdateconstraint-tagupdateonprovisionedproduct PrimitiveType: String UpdateType: Mutable .PARAMETER PortfolioId The portfolio identifier. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-servicecatalog-resourceupdateconstraint.html#cfn-servicecatalog-resourceupdateconstraint-portfolioid PrimitiveType: String UpdateType: Immutable .PARAMETER ProductId The product identifier. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-servicecatalog-resourceupdateconstraint.html#cfn-servicecatalog-resourceupdateconstraint-productid PrimitiveType: String UpdateType: Immutable .PARAMETER DeletionPolicy With the DeletionPolicy attribute you can preserve or (in some cases) backup a resource when its stack is deleted. You specify a DeletionPolicy attribute for each resource that you want to control. If a resource has no DeletionPolicy attribute, AWS CloudFormation deletes the resource by default. To keep a resource when its stack is deleted, specify Retain for that resource. You can use retain for any resource. For example, you can retain a nested stack, S3 bucket, or EC2 instance so that you can continue to use or modify those resources after you delete their stacks. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER UpdateReplacePolicy Use the UpdateReplacePolicy attribute to retain or (in some cases) backup the existing physical instance of a resource when it is replaced during a stack update operation. When you initiate a stack update, AWS CloudFormation updates resources based on differences between what you submit and the stack's current template and parameters. If you update a resource property that requires that the resource be replaced, AWS CloudFormation recreates the resource during the update. Recreating the resource generates a new physical ID. AWS CloudFormation creates the replacement resource first, and then changes references from other dependent resources to point to the replacement resource. By default, AWS CloudFormation then deletes the old resource. Using the UpdateReplacePolicy, you can specify that AWS CloudFormation retain or (in some cases) create a snapshot of the old resource. For resources that support snapshots, such as AWS::EC2::Volume, specify Snapshot to have AWS CloudFormation create a snapshot before deleting the old resource instance. You can apply the UpdateReplacePolicy attribute to any resource. UpdateReplacePolicy is only executed if you update a resource property whose update behavior is specified as Replacement, thereby causing AWS CloudFormation to replace the old resource with a new one with a new physical ID. For example, if you update the Engine property of an AWS::RDS::DBInstance resource type, AWS CloudFormation creates a new resource and replaces the current DB instance resource with the new one. The UpdateReplacePolicy attribute would then dictate whether AWS CloudFormation deleted, retained, or created a snapshot of the old DB instance. The update behavior for each property of a resource is specified in the reference topic for that resource in the AWS Resource and Property Types Reference. For more information on resource update behavior, see Update Behaviors of Stack Resources. The UpdateReplacePolicy attribute applies to stack updates you perform directly, as well as stack updates performed using change sets. Note Resources that are retained continue to exist and continue to incur applicable charges until you delete those resources. Snapshots that are created with this policy continue to exist and continue to incur applicable charges until you delete those snapshots. UpdateReplacePolicy retains the old physical resource or snapshot, but removes it from AWS CloudFormation's scope. UpdateReplacePolicy differs from the DeletionPolicy attribute in that it only applies to resources replaced during stack updates. Use DeletionPolicy for resources deleted when a stack is deleted, or when the resource definition itself is deleted from the template as part of a stack update. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER DependsOn With the DependsOn attribute you can specify that the creation of a specific resource follows another. When you add a DependsOn attribute to a resource, that resource is created only after the creation of the resource specified in the DependsOn attribute. This parameter takes a string or list of strings representing Logical IDs of resources that must be created prior to this resource being created. .PARAMETER Metadata The Metadata attribute enables you to associate structured data with a resource. By adding a Metadata attribute to a resource, you can add data in JSON or YAML to the resource declaration. In addition, you can use intrinsic functions (such as GetAtt and Ref), parameters, and pseudo parameters within the Metadata attribute to add those interpreted values. This will be returned when describing the resource using AWS CLI. .PARAMETER UpdatePolicy Use the UpdatePolicy attribute to specify how AWS CloudFormation handles updates to the AWS::AutoScaling::AutoScalingGroup resource. AWS CloudFormation invokes one of three update policies depending on the type of change you make or whether a scheduled action is associated with the Auto Scaling group. You must use the "Add-UpdatePolicy" function or the [UpdatePolicy] class here. .PARAMETER Condition Logical ID of the condition that this resource needs to be true in order for this resource to be provisioned. .FUNCTIONALITY Vaporshell #> [OutputType([ServiceCatalogResourceUpdateConstraint])] [cmdletbinding()] Param( [parameter(Mandatory = $true,Position = 0)] [ValidateLogicalId()] [string] $LogicalId, [parameter(Mandatory = $false)] [object] $Description, [parameter(Mandatory = $false)] [object] $AcceptLanguage, [parameter(Mandatory = $true)] [object] $TagUpdateOnProvisionedProduct, [parameter(Mandatory = $true)] [object] $PortfolioId, [parameter(Mandatory = $true)] [object] $ProductId, [parameter()] [DeletionPolicy] $DeletionPolicy, [parameter()] [UpdateReplacePolicy] $UpdateReplacePolicy, [parameter(Mandatory = $false)] [string[]] $DependsOn, [parameter(Mandatory = $false)] [VSJson] $Metadata, [parameter(Mandatory = $false)] [UpdatePolicy] $UpdatePolicy, [parameter(Mandatory = $false)] [string] $Condition ) Process { $obj = [ServiceCatalogResourceUpdateConstraint]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'New-VSServiceCatalogResourceUpdateConstraint' function New-VSServiceCatalogStackSetConstraint { <# .SYNOPSIS Adds an AWS::ServiceCatalog::StackSetConstraint resource to the template. Specifies a StackSet constraint. .DESCRIPTION Adds an AWS::ServiceCatalog::StackSetConstraint resource to the template. Specifies a StackSet constraint. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-servicecatalog-stacksetconstraint.html .PARAMETER LogicalId The logical ID must be alphanumeric (A-Za-z0-9) and unique within the template. Use the logical name to reference the resource in other parts of the template. For example, if you want to map an Amazon Elastic Block Store volume to an Amazon EC2 instance, you reference the logical IDs to associate the block stores with the instance. .PARAMETER Description The description of the constraint. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-servicecatalog-stacksetconstraint.html#cfn-servicecatalog-stacksetconstraint-description PrimitiveType: String UpdateType: Mutable .PARAMETER StackInstanceControl Permission to create, update, and delete stack instances. Choose from ALLOWED and NOT_ALLOWED. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-servicecatalog-stacksetconstraint.html#cfn-servicecatalog-stacksetconstraint-stackinstancecontrol PrimitiveType: String UpdateType: Mutable .PARAMETER AcceptLanguage The language code. + en - English default + jp - Japanese + zh - Chinese Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-servicecatalog-stacksetconstraint.html#cfn-servicecatalog-stacksetconstraint-acceptlanguage PrimitiveType: String UpdateType: Mutable .PARAMETER PortfolioId The portfolio identifier. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-servicecatalog-stacksetconstraint.html#cfn-servicecatalog-stacksetconstraint-portfolioid PrimitiveType: String UpdateType: Immutable .PARAMETER ProductId The product identifier. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-servicecatalog-stacksetconstraint.html#cfn-servicecatalog-stacksetconstraint-productid PrimitiveType: String UpdateType: Immutable .PARAMETER RegionList One or more AWS Regions where the provisioned product will be available. Applicable only to a CFN_STACKSET provisioned product type. The specified regions should be within the list of regions from the STACKSET constraint. To get the list of regions in the STACKSET constraint, use the DescribeProvisioningParameters operation. If no values are specified, the default value is all regions from the STACKSET constraint. PrimitiveItemType: String Type: List Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-servicecatalog-stacksetconstraint.html#cfn-servicecatalog-stacksetconstraint-regionlist UpdateType: Mutable .PARAMETER AdminRole AdminRole ARN Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-servicecatalog-stacksetconstraint.html#cfn-servicecatalog-stacksetconstraint-adminrole PrimitiveType: String UpdateType: Mutable .PARAMETER AccountList One or more AWS accounts that will have access to the provisioned product. PrimitiveItemType: String Type: List Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-servicecatalog-stacksetconstraint.html#cfn-servicecatalog-stacksetconstraint-accountlist UpdateType: Mutable .PARAMETER ExecutionRole ExecutionRole name Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-servicecatalog-stacksetconstraint.html#cfn-servicecatalog-stacksetconstraint-executionrole PrimitiveType: String UpdateType: Mutable .PARAMETER DeletionPolicy With the DeletionPolicy attribute you can preserve or (in some cases) backup a resource when its stack is deleted. You specify a DeletionPolicy attribute for each resource that you want to control. If a resource has no DeletionPolicy attribute, AWS CloudFormation deletes the resource by default. To keep a resource when its stack is deleted, specify Retain for that resource. You can use retain for any resource. For example, you can retain a nested stack, S3 bucket, or EC2 instance so that you can continue to use or modify those resources after you delete their stacks. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER UpdateReplacePolicy Use the UpdateReplacePolicy attribute to retain or (in some cases) backup the existing physical instance of a resource when it is replaced during a stack update operation. When you initiate a stack update, AWS CloudFormation updates resources based on differences between what you submit and the stack's current template and parameters. If you update a resource property that requires that the resource be replaced, AWS CloudFormation recreates the resource during the update. Recreating the resource generates a new physical ID. AWS CloudFormation creates the replacement resource first, and then changes references from other dependent resources to point to the replacement resource. By default, AWS CloudFormation then deletes the old resource. Using the UpdateReplacePolicy, you can specify that AWS CloudFormation retain or (in some cases) create a snapshot of the old resource. For resources that support snapshots, such as AWS::EC2::Volume, specify Snapshot to have AWS CloudFormation create a snapshot before deleting the old resource instance. You can apply the UpdateReplacePolicy attribute to any resource. UpdateReplacePolicy is only executed if you update a resource property whose update behavior is specified as Replacement, thereby causing AWS CloudFormation to replace the old resource with a new one with a new physical ID. For example, if you update the Engine property of an AWS::RDS::DBInstance resource type, AWS CloudFormation creates a new resource and replaces the current DB instance resource with the new one. The UpdateReplacePolicy attribute would then dictate whether AWS CloudFormation deleted, retained, or created a snapshot of the old DB instance. The update behavior for each property of a resource is specified in the reference topic for that resource in the AWS Resource and Property Types Reference. For more information on resource update behavior, see Update Behaviors of Stack Resources. The UpdateReplacePolicy attribute applies to stack updates you perform directly, as well as stack updates performed using change sets. Note Resources that are retained continue to exist and continue to incur applicable charges until you delete those resources. Snapshots that are created with this policy continue to exist and continue to incur applicable charges until you delete those snapshots. UpdateReplacePolicy retains the old physical resource or snapshot, but removes it from AWS CloudFormation's scope. UpdateReplacePolicy differs from the DeletionPolicy attribute in that it only applies to resources replaced during stack updates. Use DeletionPolicy for resources deleted when a stack is deleted, or when the resource definition itself is deleted from the template as part of a stack update. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER DependsOn With the DependsOn attribute you can specify that the creation of a specific resource follows another. When you add a DependsOn attribute to a resource, that resource is created only after the creation of the resource specified in the DependsOn attribute. This parameter takes a string or list of strings representing Logical IDs of resources that must be created prior to this resource being created. .PARAMETER Metadata The Metadata attribute enables you to associate structured data with a resource. By adding a Metadata attribute to a resource, you can add data in JSON or YAML to the resource declaration. In addition, you can use intrinsic functions (such as GetAtt and Ref), parameters, and pseudo parameters within the Metadata attribute to add those interpreted values. This will be returned when describing the resource using AWS CLI. .PARAMETER UpdatePolicy Use the UpdatePolicy attribute to specify how AWS CloudFormation handles updates to the AWS::AutoScaling::AutoScalingGroup resource. AWS CloudFormation invokes one of three update policies depending on the type of change you make or whether a scheduled action is associated with the Auto Scaling group. You must use the "Add-UpdatePolicy" function or the [UpdatePolicy] class here. .PARAMETER Condition Logical ID of the condition that this resource needs to be true in order for this resource to be provisioned. .FUNCTIONALITY Vaporshell #> [OutputType([ServiceCatalogStackSetConstraint])] [cmdletbinding()] Param( [parameter(Mandatory = $true,Position = 0)] [ValidateLogicalId()] [string] $LogicalId, [parameter(Mandatory = $true)] [object] $Description, [parameter(Mandatory = $true)] [object] $StackInstanceControl, [parameter(Mandatory = $false)] [object] $AcceptLanguage, [parameter(Mandatory = $true)] [object] $PortfolioId, [parameter(Mandatory = $true)] [object] $ProductId, [parameter(Mandatory = $true)] $RegionList, [parameter(Mandatory = $true)] [object] $AdminRole, [parameter(Mandatory = $true)] $AccountList, [parameter(Mandatory = $true)] [object] $ExecutionRole, [parameter()] [DeletionPolicy] $DeletionPolicy, [parameter()] [UpdateReplacePolicy] $UpdateReplacePolicy, [parameter(Mandatory = $false)] [string[]] $DependsOn, [parameter(Mandatory = $false)] [VSJson] $Metadata, [parameter(Mandatory = $false)] [UpdatePolicy] $UpdatePolicy, [parameter(Mandatory = $false)] [string] $Condition ) Process { $obj = [ServiceCatalogStackSetConstraint]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'New-VSServiceCatalogStackSetConstraint' function New-VSServiceCatalogTagOption { <# .SYNOPSIS Adds an AWS::ServiceCatalog::TagOption resource to the template. Specifies a TagOption. A TagOption is a key-value pair managed by AWS Service Catalog that serves as a template for creating an AWS tag. .DESCRIPTION Adds an AWS::ServiceCatalog::TagOption resource to the template. Specifies a TagOption. A TagOption is a key-value pair managed by AWS Service Catalog that serves as a template for creating an AWS tag. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-servicecatalog-tagoption.html .PARAMETER LogicalId The logical ID must be alphanumeric (A-Za-z0-9) and unique within the template. Use the logical name to reference the resource in other parts of the template. For example, if you want to map an Amazon Elastic Block Store volume to an Amazon EC2 instance, you reference the logical IDs to associate the block stores with the instance. .PARAMETER Active The TagOption active state. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-servicecatalog-tagoption.html#cfn-servicecatalog-tagoption-active PrimitiveType: Boolean UpdateType: Mutable .PARAMETER Value The TagOption value. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-servicecatalog-tagoption.html#cfn-servicecatalog-tagoption-value PrimitiveType: String UpdateType: Immutable .PARAMETER Key The TagOption key. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-servicecatalog-tagoption.html#cfn-servicecatalog-tagoption-key PrimitiveType: String UpdateType: Immutable .PARAMETER DeletionPolicy With the DeletionPolicy attribute you can preserve or (in some cases) backup a resource when its stack is deleted. You specify a DeletionPolicy attribute for each resource that you want to control. If a resource has no DeletionPolicy attribute, AWS CloudFormation deletes the resource by default. To keep a resource when its stack is deleted, specify Retain for that resource. You can use retain for any resource. For example, you can retain a nested stack, S3 bucket, or EC2 instance so that you can continue to use or modify those resources after you delete their stacks. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER UpdateReplacePolicy Use the UpdateReplacePolicy attribute to retain or (in some cases) backup the existing physical instance of a resource when it is replaced during a stack update operation. When you initiate a stack update, AWS CloudFormation updates resources based on differences between what you submit and the stack's current template and parameters. If you update a resource property that requires that the resource be replaced, AWS CloudFormation recreates the resource during the update. Recreating the resource generates a new physical ID. AWS CloudFormation creates the replacement resource first, and then changes references from other dependent resources to point to the replacement resource. By default, AWS CloudFormation then deletes the old resource. Using the UpdateReplacePolicy, you can specify that AWS CloudFormation retain or (in some cases) create a snapshot of the old resource. For resources that support snapshots, such as AWS::EC2::Volume, specify Snapshot to have AWS CloudFormation create a snapshot before deleting the old resource instance. You can apply the UpdateReplacePolicy attribute to any resource. UpdateReplacePolicy is only executed if you update a resource property whose update behavior is specified as Replacement, thereby causing AWS CloudFormation to replace the old resource with a new one with a new physical ID. For example, if you update the Engine property of an AWS::RDS::DBInstance resource type, AWS CloudFormation creates a new resource and replaces the current DB instance resource with the new one. The UpdateReplacePolicy attribute would then dictate whether AWS CloudFormation deleted, retained, or created a snapshot of the old DB instance. The update behavior for each property of a resource is specified in the reference topic for that resource in the AWS Resource and Property Types Reference. For more information on resource update behavior, see Update Behaviors of Stack Resources. The UpdateReplacePolicy attribute applies to stack updates you perform directly, as well as stack updates performed using change sets. Note Resources that are retained continue to exist and continue to incur applicable charges until you delete those resources. Snapshots that are created with this policy continue to exist and continue to incur applicable charges until you delete those snapshots. UpdateReplacePolicy retains the old physical resource or snapshot, but removes it from AWS CloudFormation's scope. UpdateReplacePolicy differs from the DeletionPolicy attribute in that it only applies to resources replaced during stack updates. Use DeletionPolicy for resources deleted when a stack is deleted, or when the resource definition itself is deleted from the template as part of a stack update. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER DependsOn With the DependsOn attribute you can specify that the creation of a specific resource follows another. When you add a DependsOn attribute to a resource, that resource is created only after the creation of the resource specified in the DependsOn attribute. This parameter takes a string or list of strings representing Logical IDs of resources that must be created prior to this resource being created. .PARAMETER Metadata The Metadata attribute enables you to associate structured data with a resource. By adding a Metadata attribute to a resource, you can add data in JSON or YAML to the resource declaration. In addition, you can use intrinsic functions (such as GetAtt and Ref), parameters, and pseudo parameters within the Metadata attribute to add those interpreted values. This will be returned when describing the resource using AWS CLI. .PARAMETER UpdatePolicy Use the UpdatePolicy attribute to specify how AWS CloudFormation handles updates to the AWS::AutoScaling::AutoScalingGroup resource. AWS CloudFormation invokes one of three update policies depending on the type of change you make or whether a scheduled action is associated with the Auto Scaling group. You must use the "Add-UpdatePolicy" function or the [UpdatePolicy] class here. .PARAMETER Condition Logical ID of the condition that this resource needs to be true in order for this resource to be provisioned. .FUNCTIONALITY Vaporshell #> [OutputType([ServiceCatalogTagOption])] [cmdletbinding()] Param( [parameter(Mandatory = $true,Position = 0)] [ValidateLogicalId()] [string] $LogicalId, [parameter(Mandatory = $false)] [object] $Active, [parameter(Mandatory = $true)] [object] $Value, [parameter(Mandatory = $true)] [object] $Key, [parameter()] [DeletionPolicy] $DeletionPolicy, [parameter()] [UpdateReplacePolicy] $UpdateReplacePolicy, [parameter(Mandatory = $false)] [string[]] $DependsOn, [parameter(Mandatory = $false)] [VSJson] $Metadata, [parameter(Mandatory = $false)] [UpdatePolicy] $UpdatePolicy, [parameter(Mandatory = $false)] [string] $Condition ) Process { $obj = [ServiceCatalogTagOption]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'New-VSServiceCatalogTagOption' function New-VSServiceCatalogTagOptionAssociation { <# .SYNOPSIS Adds an AWS::ServiceCatalog::TagOptionAssociation resource to the template. Associate the specified TagOption with the specified portfolio or product. .DESCRIPTION Adds an AWS::ServiceCatalog::TagOptionAssociation resource to the template. Associate the specified TagOption with the specified portfolio or product. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-servicecatalog-tagoptionassociation.html .PARAMETER LogicalId The logical ID must be alphanumeric (A-Za-z0-9) and unique within the template. Use the logical name to reference the resource in other parts of the template. For example, if you want to map an Amazon Elastic Block Store volume to an Amazon EC2 instance, you reference the logical IDs to associate the block stores with the instance. .PARAMETER TagOptionId The TagOption identifier. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-servicecatalog-tagoptionassociation.html#cfn-servicecatalog-tagoptionassociation-tagoptionid PrimitiveType: String UpdateType: Immutable .PARAMETER ResourceId The resource identifier. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-servicecatalog-tagoptionassociation.html#cfn-servicecatalog-tagoptionassociation-resourceid PrimitiveType: String UpdateType: Immutable .PARAMETER DeletionPolicy With the DeletionPolicy attribute you can preserve or (in some cases) backup a resource when its stack is deleted. You specify a DeletionPolicy attribute for each resource that you want to control. If a resource has no DeletionPolicy attribute, AWS CloudFormation deletes the resource by default. To keep a resource when its stack is deleted, specify Retain for that resource. You can use retain for any resource. For example, you can retain a nested stack, S3 bucket, or EC2 instance so that you can continue to use or modify those resources after you delete their stacks. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER UpdateReplacePolicy Use the UpdateReplacePolicy attribute to retain or (in some cases) backup the existing physical instance of a resource when it is replaced during a stack update operation. When you initiate a stack update, AWS CloudFormation updates resources based on differences between what you submit and the stack's current template and parameters. If you update a resource property that requires that the resource be replaced, AWS CloudFormation recreates the resource during the update. Recreating the resource generates a new physical ID. AWS CloudFormation creates the replacement resource first, and then changes references from other dependent resources to point to the replacement resource. By default, AWS CloudFormation then deletes the old resource. Using the UpdateReplacePolicy, you can specify that AWS CloudFormation retain or (in some cases) create a snapshot of the old resource. For resources that support snapshots, such as AWS::EC2::Volume, specify Snapshot to have AWS CloudFormation create a snapshot before deleting the old resource instance. You can apply the UpdateReplacePolicy attribute to any resource. UpdateReplacePolicy is only executed if you update a resource property whose update behavior is specified as Replacement, thereby causing AWS CloudFormation to replace the old resource with a new one with a new physical ID. For example, if you update the Engine property of an AWS::RDS::DBInstance resource type, AWS CloudFormation creates a new resource and replaces the current DB instance resource with the new one. The UpdateReplacePolicy attribute would then dictate whether AWS CloudFormation deleted, retained, or created a snapshot of the old DB instance. The update behavior for each property of a resource is specified in the reference topic for that resource in the AWS Resource and Property Types Reference. For more information on resource update behavior, see Update Behaviors of Stack Resources. The UpdateReplacePolicy attribute applies to stack updates you perform directly, as well as stack updates performed using change sets. Note Resources that are retained continue to exist and continue to incur applicable charges until you delete those resources. Snapshots that are created with this policy continue to exist and continue to incur applicable charges until you delete those snapshots. UpdateReplacePolicy retains the old physical resource or snapshot, but removes it from AWS CloudFormation's scope. UpdateReplacePolicy differs from the DeletionPolicy attribute in that it only applies to resources replaced during stack updates. Use DeletionPolicy for resources deleted when a stack is deleted, or when the resource definition itself is deleted from the template as part of a stack update. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER DependsOn With the DependsOn attribute you can specify that the creation of a specific resource follows another. When you add a DependsOn attribute to a resource, that resource is created only after the creation of the resource specified in the DependsOn attribute. This parameter takes a string or list of strings representing Logical IDs of resources that must be created prior to this resource being created. .PARAMETER Metadata The Metadata attribute enables you to associate structured data with a resource. By adding a Metadata attribute to a resource, you can add data in JSON or YAML to the resource declaration. In addition, you can use intrinsic functions (such as GetAtt and Ref), parameters, and pseudo parameters within the Metadata attribute to add those interpreted values. This will be returned when describing the resource using AWS CLI. .PARAMETER UpdatePolicy Use the UpdatePolicy attribute to specify how AWS CloudFormation handles updates to the AWS::AutoScaling::AutoScalingGroup resource. AWS CloudFormation invokes one of three update policies depending on the type of change you make or whether a scheduled action is associated with the Auto Scaling group. You must use the "Add-UpdatePolicy" function or the [UpdatePolicy] class here. .PARAMETER Condition Logical ID of the condition that this resource needs to be true in order for this resource to be provisioned. .FUNCTIONALITY Vaporshell #> [OutputType([ServiceCatalogTagOptionAssociation])] [cmdletbinding()] Param( [parameter(Mandatory = $true,Position = 0)] [ValidateLogicalId()] [string] $LogicalId, [parameter(Mandatory = $true)] [object] $TagOptionId, [parameter(Mandatory = $true)] [object] $ResourceId, [parameter()] [DeletionPolicy] $DeletionPolicy, [parameter()] [UpdateReplacePolicy] $UpdateReplacePolicy, [parameter(Mandatory = $false)] [string[]] $DependsOn, [parameter(Mandatory = $false)] [VSJson] $Metadata, [parameter(Mandatory = $false)] [UpdatePolicy] $UpdatePolicy, [parameter(Mandatory = $false)] [string] $Condition ) Process { $obj = [ServiceCatalogTagOptionAssociation]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'New-VSServiceCatalogTagOptionAssociation' |