VaporShell.SSM.psm1
|
# PSM1 Contents function Format-Json { [CmdletBinding()] Param ( [Parameter(Mandatory = $true, Position = 0, ValueFromPipeline = $true)] [String] $Json ) Begin { $cleaner = { param([String]$Line) Process{ [Regex]::Replace( $Line, "\\u(?<Value>[a-zA-Z0-9]{4})", { param($m)([char]([int]::Parse( $m.Groups['Value'].Value, [System.Globalization.NumberStyles]::HexNumber ))).ToString() } ) } } } Process { if ($PSVersionTable.PSVersion.Major -lt 6) { try { $indent = 0; $res = $Json -split '\n' | ForEach-Object { if ($_ -match '[\}\]]') { # This line contains ] or }, decrement the indentation level $indent-- } $line = (' ' * $indent * 2) + $_.TrimStart().Replace(': ', ': ') if ($_ -match '[\{\[]') { # This line contains [ or {, increment the indentation level $indent++ } $cleaner.Invoke($line) } $res -join "`n" } catch { ($Json -split '\n' | ForEach-Object {$cleaner.Invoke($_)}) -join "`n" } } else { ($Json -split '\n' | ForEach-Object {$cleaner.Invoke($_)}) -join "`n" } } } function Get-TrueCount { Param ( [parameter(Mandatory = $false,Position = 0,ValueFromPipeline = $true)] $Array ) Process { if ($array) { if ($array.Count) { $count = $array.Count } else { $count = 1 } } else { $count = 0 } } End { return $count } } function New-VSError { <# .SYNOPSIS Error generator function to use in tandem with $PSCmdlet.ThrowTerminatingError() .PARAMETER Result Allows input of an error from AWS SDK, resulting in the Exception message being parsed out. .PARAMETER String Used to create basic String message errors in the same wrapper #> [cmdletbinding(DefaultParameterSetName="Result")] param( [parameter(Position=0,ParameterSetName="Result")] $Result, [parameter(Position=0,ParameterSetName="String")] $String ) switch ($PSCmdlet.ParameterSetName) { Result { $Exception = "$($result.Exception.InnerException.Message)" } String { $Exception = "$String" } } $e = New-Object "System.Exception" $Exception $errorRecord = New-Object 'System.Management.Automation.ErrorRecord' $e, $null, ([System.Management.Automation.ErrorCategory]::InvalidOperation), $null return $errorRecord } function ResolveS3Endpoint { <# .SYNOPSIS Resolves the S3 endpoint most appropriate for each region. #> Param ( [parameter(Mandatory=$true,Position=0)] [ValidateSet("eu-west-2","ap-south-1","us-east-2","sa-east-1","us-west-1","us-west-2","eu-west-1","ap-southeast-2","ca-central-1","ap-northeast-2","us-east-1","eu-central-1","ap-southeast-1","ap-northeast-1")] [String] $Region ) $endpointMap = @{ "us-east-2" = "s3.us-east-2.amazonaws.com" "us-east-1" = "s3.amazonaws.com" "us-west-1" = "s3-us-west-1.amazonaws.com" "us-west-2" = "s3-us-west-2.amazonaws.com" "ca-central-1" = "s3.ca-central-1.amazonaws.com" "ap-south-1" = "s3.ap-south-1.amazonaws.com" "ap-northeast-2" = "s3.ap-northeast-2.amazonaws.com" "ap-southeast-1" = "s3-ap-southeast-1.amazonaws.com" "ap-southeast-2" = "s3-ap-southeast-2.amazonaws.com" "ap-northeast-1" = "s3-ap-northeast-1.amazonaws.com" "eu-central-1" = "s3.eu-central-1.amazonaws.com" "eu-west-1" = "s3-eu-west-1.amazonaws.com" "eu-west-2" = "s3.eu-west-2.amazonaws.com" "sa-east-1" = "s3-sa-east-1.amazonaws.com" } return $endpointMap[$Region] } function Add-VSSSMAssociationInstanceAssociationOutputLocation { <# .SYNOPSIS Adds an AWS::SSM::Association.InstanceAssociationOutputLocation resource property to the template. InstanceAssociationOutputLocation is a property of the AWS::SSM::Association: https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ssm-association.html resource that specifies an Amazon S3 bucket where you want to store the results of this association request. .DESCRIPTION Adds an AWS::SSM::Association.InstanceAssociationOutputLocation resource property to the template. InstanceAssociationOutputLocation is a property of the AWS::SSM::Association: https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ssm-association.html resource that specifies an Amazon S3 bucket where you want to store the results of this association request. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ssm-association-instanceassociationoutputlocation.html .PARAMETER S3Location S3OutputLocation is a property of the InstanceAssociationOutputLocation: https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ssm-association-instanceassociationoutputlocation.html property that specifies an Amazon S3 bucket where you want to store the results of this request. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ssm-association-instanceassociationoutputlocation.html#cfn-ssm-association-instanceassociationoutputlocation-s3location UpdateType: Mutable Type: S3OutputLocation .FUNCTIONALITY Vaporshell #> [OutputType([SSMAssociationInstanceAssociationOutputLocation])] [cmdletbinding()] Param( [parameter(Mandatory = $false)] $S3Location ) Process { $obj = [SSMAssociationInstanceAssociationOutputLocation]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSSSMAssociationInstanceAssociationOutputLocation' function Add-VSSSMAssociationParameterValues { <# .SYNOPSIS Adds an AWS::SSM::Association.ParameterValues resource property to the template. ParameterValues is a property of the AWS::SSM::Association: https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ssm-association.html resource that specifies the parameters for the runtime configuration of the document. .DESCRIPTION Adds an AWS::SSM::Association.ParameterValues resource property to the template. ParameterValues is a property of the AWS::SSM::Association: https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ssm-association.html resource that specifies the parameters for the runtime configuration of the document. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ssm-association-parametervalues.html .PARAMETER ParameterValues The parameters for the runtime configuration of the document. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ssm-association-parametervalues.html#cfn-ssm-association-parametervalues-parametervalues UpdateType: Mutable Type: List PrimitiveItemType: String .FUNCTIONALITY Vaporshell #> [OutputType([SSMAssociationParameterValues])] [cmdletbinding()] Param( [parameter(Mandatory = $false)] $ParameterValues ) Process { $obj = [SSMAssociationParameterValues]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSSSMAssociationParameterValues' function Add-VSSSMAssociationS3OutputLocation { <# .SYNOPSIS Adds an AWS::SSM::Association.S3OutputLocation resource property to the template. S3OutputLocation is a property of the AWS::SSM::Association: https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ssm-association.html resource that specifies an Amazon S3 bucket where you want to store the results of this association request. .DESCRIPTION Adds an AWS::SSM::Association.S3OutputLocation resource property to the template. S3OutputLocation is a property of the AWS::SSM::Association: https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ssm-association.html resource that specifies an Amazon S3 bucket where you want to store the results of this association request. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ssm-association-s3outputlocation.html .PARAMETER OutputS3Region *Update requires*: No interruption: https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/using-cfn-updating-stacks-update-behaviors.html#update-no-interrupt Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ssm-association-s3outputlocation.html#cfn-ssm-association-s3outputlocation-outputs3region UpdateType: Mutable PrimitiveType: String .PARAMETER OutputS3BucketName The name of the S3 bucket. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ssm-association-s3outputlocation.html#cfn-ssm-association-s3outputlocation-outputs3bucketname UpdateType: Mutable PrimitiveType: String .PARAMETER OutputS3KeyPrefix The S3 bucket subfolder. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ssm-association-s3outputlocation.html#cfn-ssm-association-s3outputlocation-outputs3keyprefix UpdateType: Mutable PrimitiveType: String .FUNCTIONALITY Vaporshell #> [OutputType([SSMAssociationS3OutputLocation])] [cmdletbinding()] Param( [parameter(Mandatory = $false)] [object] $OutputS3Region, [parameter(Mandatory = $false)] [object] $OutputS3BucketName, [parameter(Mandatory = $false)] [object] $OutputS3KeyPrefix ) Process { $obj = [SSMAssociationS3OutputLocation]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSSSMAssociationS3OutputLocation' function Add-VSSSMAssociationTarget { <# .SYNOPSIS Adds an AWS::SSM::Association.Target resource property to the template. Target is a property of the AWS::SSM::Association: https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ssm-association.html resource that specifies the targets for an SSM document in Systems Manager. .DESCRIPTION Adds an AWS::SSM::Association.Target resource property to the template. Target is a property of the AWS::SSM::Association: https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ssm-association.html resource that specifies the targets for an SSM document in Systems Manager. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ssm-association-target.html .PARAMETER Key User-defined criteria for sending commands that target instances that meet the criteria. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ssm-association-target.html#cfn-ssm-association-target-key UpdateType: Mutable PrimitiveType: String .PARAMETER Values User-defined criteria that maps to Key. For example, if you specified tag:ServerRole, you could specify value:WebServer to run a command on instances that include EC2 tags of ServerRole,WebServer. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ssm-association-target.html#cfn-ssm-association-target-values UpdateType: Mutable Type: List PrimitiveItemType: String .FUNCTIONALITY Vaporshell #> [OutputType([SSMAssociationTarget])] [cmdletbinding()] Param( [parameter(Mandatory = $true)] [object] $Key, [parameter(Mandatory = $true)] $Values ) Process { $obj = [SSMAssociationTarget]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSSSMAssociationTarget' function Add-VSSSMMaintenanceWindowTargetTargets { <# .SYNOPSIS Adds an AWS::SSM::MaintenanceWindowTarget.Targets resource property to the template. The Targets property type specifies adding a target to a maintenance window target in AWS Systems Manager. .DESCRIPTION Adds an AWS::SSM::MaintenanceWindowTarget.Targets resource property to the template. The Targets property type specifies adding a target to a maintenance window target in AWS Systems Manager. Targets is a property of the AWS::SSM::MaintenanceWindowTarget: https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ssm-maintenancewindowtarget.html resource. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ssm-maintenancewindowtarget-targets.html .PARAMETER Values User-defined criteria that maps to Key. For example, if you specified tag:ServerRole, you could specify value:WebServer to run a command on instances that include EC2 tags of ServerRole,WebServer. PrimitiveItemType: String Type: List Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ssm-maintenancewindowtarget-targets.html#cfn-ssm-maintenancewindowtarget-targets-values UpdateType: Mutable .PARAMETER Key User-defined criteria for sending commands that target instances that meet the criteria. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ssm-maintenancewindowtarget-targets.html#cfn-ssm-maintenancewindowtarget-targets-key PrimitiveType: String UpdateType: Mutable .FUNCTIONALITY Vaporshell #> [OutputType([SSMMaintenanceWindowTargetTargets])] [cmdletbinding()] Param( [parameter(Mandatory = $false)] $Values, [parameter(Mandatory = $true)] [object] $Key ) Process { $obj = [SSMMaintenanceWindowTargetTargets]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSSSMMaintenanceWindowTargetTargets' function Add-VSSSMMaintenanceWindowTaskLoggingInfo { <# .SYNOPSIS Adds an AWS::SSM::MaintenanceWindowTask.LoggingInfo resource property to the template. The LoggingInfo property type specifies information about the Amazon S3 bucket to write instance-level logs to. .DESCRIPTION Adds an AWS::SSM::MaintenanceWindowTask.LoggingInfo resource property to the template. The LoggingInfo property type specifies information about the Amazon S3 bucket to write instance-level logs to. LoggingInfo is a property of the AWS::SSM::MaintenanceWindowTask: https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ssm-maintenancewindowtask.html resource. **Note** LoggingInfo has been deprecated. To specify an S3 bucket to contain logs, instead use the OutputS3BucketName and OutputS3KeyPrefix options in the TaskInvocationParameters structure. For information about how Systems Manager handles these options for the supported maintenance window task types, see AWS Systems Manager MaintenanceWindowTask TaskInvocationParameters: https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ssm-maintenancewindowtask-taskinvocationparameters.html. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ssm-maintenancewindowtask-logginginfo.html .PARAMETER S3Bucket The name of an S3 bucket where execution logs are stored . Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ssm-maintenancewindowtask-logginginfo.html#cfn-ssm-maintenancewindowtask-logginginfo-s3bucket PrimitiveType: String UpdateType: Mutable .PARAMETER Region The Region where the S3 bucket is located. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ssm-maintenancewindowtask-logginginfo.html#cfn-ssm-maintenancewindowtask-logginginfo-region PrimitiveType: String UpdateType: Mutable .PARAMETER S3Prefix The Amazon S3 bucket subfolder. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ssm-maintenancewindowtask-logginginfo.html#cfn-ssm-maintenancewindowtask-logginginfo-s3prefix PrimitiveType: String UpdateType: Mutable .FUNCTIONALITY Vaporshell #> [OutputType([SSMMaintenanceWindowTaskLoggingInfo])] [cmdletbinding()] Param( [parameter(Mandatory = $true)] [object] $S3Bucket, [parameter(Mandatory = $true)] [object] $Region, [parameter(Mandatory = $false)] [object] $S3Prefix ) Process { $obj = [SSMMaintenanceWindowTaskLoggingInfo]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSSSMMaintenanceWindowTaskLoggingInfo' function Add-VSSSMMaintenanceWindowTaskMaintenanceWindowAutomationParameters { <# .SYNOPSIS Adds an AWS::SSM::MaintenanceWindowTask.MaintenanceWindowAutomationParameters resource property to the template. The MaintenanceWindowAutomationParameters property type specifies the parameters for an AUTOMATION task type for a maintenance window task in AWS Systems Manager. .DESCRIPTION Adds an AWS::SSM::MaintenanceWindowTask.MaintenanceWindowAutomationParameters resource property to the template. The MaintenanceWindowAutomationParameters property type specifies the parameters for an AUTOMATION task type for a maintenance window task in AWS Systems Manager. MaintenanceWindowAutomationParameters is a property of the TaskInvocationParameters: https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ssm-maintenancewindowtask-taskinvocationparameters.html property type. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ssm-maintenancewindowtask-maintenancewindowautomationparameters.html .PARAMETER Parameters The parameters for the AUTOMATION task. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ssm-maintenancewindowtask-maintenancewindowautomationparameters.html#cfn-ssm-maintenancewindowtask-maintenancewindowautomationparameters-parameters PrimitiveType: Json UpdateType: Mutable .PARAMETER DocumentVersion The version of an Automation document to use during task execution. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ssm-maintenancewindowtask-maintenancewindowautomationparameters.html#cfn-ssm-maintenancewindowtask-maintenancewindowautomationparameters-documentversion PrimitiveType: String UpdateType: Mutable .FUNCTIONALITY Vaporshell #> [OutputType([SSMMaintenanceWindowTaskMaintenanceWindowAutomationParameters])] [cmdletbinding()] Param( [parameter(Mandatory = $false)] [VSJson] $Parameters, [parameter(Mandatory = $false)] [object] $DocumentVersion ) Process { $obj = [SSMMaintenanceWindowTaskMaintenanceWindowAutomationParameters]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSSSMMaintenanceWindowTaskMaintenanceWindowAutomationParameters' function Add-VSSSMMaintenanceWindowTaskMaintenanceWindowLambdaParameters { <# .SYNOPSIS Adds an AWS::SSM::MaintenanceWindowTask.MaintenanceWindowLambdaParameters resource property to the template. The MaintenanceWindowLambdaParameters property type specifies the parameters for a LAMBDA task type for a maintenance window task in AWS Systems Manager. .DESCRIPTION Adds an AWS::SSM::MaintenanceWindowTask.MaintenanceWindowLambdaParameters resource property to the template. The MaintenanceWindowLambdaParameters property type specifies the parameters for a LAMBDA task type for a maintenance window task in AWS Systems Manager. MaintenanceWindowLambdaParameters is a property of the TaskInvocationParameters: https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ssm-maintenancewindowtask-taskinvocationparameters.html property type. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ssm-maintenancewindowtask-maintenancewindowlambdaparameters.html .PARAMETER ClientContext Client-specific information to pass to the Lambda function that you're invoking. You can then use the context variable to process the client information in your Lambda function. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ssm-maintenancewindowtask-maintenancewindowlambdaparameters.html#cfn-ssm-maintenancewindowtask-maintenancewindowlambdaparameters-clientcontext PrimitiveType: String UpdateType: Mutable .PARAMETER Qualifier A Lambda function version or alias name. If you specify a function version, the action uses the qualified function Amazon Resource Name ARN to invoke a specific Lambda function. If you specify an alias name, the action uses the alias ARN to invoke the Lambda function version that the alias points to. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ssm-maintenancewindowtask-maintenancewindowlambdaparameters.html#cfn-ssm-maintenancewindowtask-maintenancewindowlambdaparameters-qualifier PrimitiveType: String UpdateType: Mutable .PARAMETER Payload JSON to provide to your Lambda function as input. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ssm-maintenancewindowtask-maintenancewindowlambdaparameters.html#cfn-ssm-maintenancewindowtask-maintenancewindowlambdaparameters-payload PrimitiveType: String UpdateType: Mutable .FUNCTIONALITY Vaporshell #> [OutputType([SSMMaintenanceWindowTaskMaintenanceWindowLambdaParameters])] [cmdletbinding()] Param( [parameter(Mandatory = $false)] [object] $ClientContext, [parameter(Mandatory = $false)] [object] $Qualifier, [parameter(Mandatory = $false)] [object] $Payload ) Process { $obj = [SSMMaintenanceWindowTaskMaintenanceWindowLambdaParameters]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSSSMMaintenanceWindowTaskMaintenanceWindowLambdaParameters' function Add-VSSSMMaintenanceWindowTaskMaintenanceWindowRunCommandParameters { <# .SYNOPSIS Adds an AWS::SSM::MaintenanceWindowTask.MaintenanceWindowRunCommandParameters resource property to the template. The MaintenanceWindowRunCommandParameters property type specifies the parameters for a RUN_COMMAND task type for a maintenance window task in AWS Systems Manager. .DESCRIPTION Adds an AWS::SSM::MaintenanceWindowTask.MaintenanceWindowRunCommandParameters resource property to the template. The MaintenanceWindowRunCommandParameters property type specifies the parameters for a RUN_COMMAND task type for a maintenance window task in AWS Systems Manager. MaintenanceWindowRunCommandParameters is a property of the TaskInvocationParameters: https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ssm-maintenancewindowtask-taskinvocationparameters.html property type. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ssm-maintenancewindowtask-maintenancewindowruncommandparameters.html .PARAMETER TimeoutSeconds If this time is reached and the command has not already started running, it doesn't run. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ssm-maintenancewindowtask-maintenancewindowruncommandparameters.html#cfn-ssm-maintenancewindowtask-maintenancewindowruncommandparameters-timeoutseconds PrimitiveType: Integer UpdateType: Mutable .PARAMETER Comment Information about the command or commands to run. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ssm-maintenancewindowtask-maintenancewindowruncommandparameters.html#cfn-ssm-maintenancewindowtask-maintenancewindowruncommandparameters-comment PrimitiveType: String UpdateType: Mutable .PARAMETER OutputS3KeyPrefix The S3 bucket subfolder. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ssm-maintenancewindowtask-maintenancewindowruncommandparameters.html#cfn-ssm-maintenancewindowtask-maintenancewindowruncommandparameters-outputs3keyprefix PrimitiveType: String UpdateType: Mutable .PARAMETER Parameters The parameters for the RUN_COMMAND task execution. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ssm-maintenancewindowtask-maintenancewindowruncommandparameters.html#cfn-ssm-maintenancewindowtask-maintenancewindowruncommandparameters-parameters PrimitiveType: Json UpdateType: Mutable .PARAMETER DocumentHashType The SHA-256 or SHA-1 hash type. SHA-1 hashes are deprecated. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ssm-maintenancewindowtask-maintenancewindowruncommandparameters.html#cfn-ssm-maintenancewindowtask-maintenancewindowruncommandparameters-documenthashtype PrimitiveType: String UpdateType: Mutable .PARAMETER ServiceRoleArn The ARN of the IAM service role to use to publish Amazon Simple Notification Service Amazon SNS notifications for maintenance window Run Command tasks. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ssm-maintenancewindowtask-maintenancewindowruncommandparameters.html#cfn-ssm-maintenancewindowtask-maintenancewindowruncommandparameters-servicerolearn PrimitiveType: String UpdateType: Mutable .PARAMETER NotificationConfig Configurations for sending notifications about command status changes on a per-instance basis. Type: NotificationConfig Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ssm-maintenancewindowtask-maintenancewindowruncommandparameters.html#cfn-ssm-maintenancewindowtask-maintenancewindowruncommandparameters-notificationconfig UpdateType: Mutable .PARAMETER OutputS3BucketName The name of the S3 bucket. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ssm-maintenancewindowtask-maintenancewindowruncommandparameters.html#cfn-ssm-maintenancewindowtask-maintenancewindowruncommandparameters-outputs3bucketname PrimitiveType: String UpdateType: Mutable .PARAMETER DocumentHash The SHA-256 or SHA-1 hash created by the system when the document was created. SHA-1 hashes have been deprecated. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ssm-maintenancewindowtask-maintenancewindowruncommandparameters.html#cfn-ssm-maintenancewindowtask-maintenancewindowruncommandparameters-documenthash PrimitiveType: String UpdateType: Mutable .FUNCTIONALITY Vaporshell #> [OutputType([SSMMaintenanceWindowTaskMaintenanceWindowRunCommandParameters])] [cmdletbinding()] Param( [parameter(Mandatory = $false)] [object] $TimeoutSeconds, [parameter(Mandatory = $false)] [object] $Comment, [parameter(Mandatory = $false)] [object] $OutputS3KeyPrefix, [parameter(Mandatory = $false)] [VSJson] $Parameters, [parameter(Mandatory = $false)] [object] $DocumentHashType, [parameter(Mandatory = $false)] [object] $ServiceRoleArn, [parameter(Mandatory = $false)] $NotificationConfig, [parameter(Mandatory = $false)] [object] $OutputS3BucketName, [parameter(Mandatory = $false)] [object] $DocumentHash ) Process { $obj = [SSMMaintenanceWindowTaskMaintenanceWindowRunCommandParameters]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSSSMMaintenanceWindowTaskMaintenanceWindowRunCommandParameters' function Add-VSSSMMaintenanceWindowTaskMaintenanceWindowStepFunctionsParameters { <# .SYNOPSIS Adds an AWS::SSM::MaintenanceWindowTask.MaintenanceWindowStepFunctionsParameters resource property to the template. The MaintenanceWindowStepFunctionsParameters property type specifies the parameters for the execution of a STEP_FUNCTIONS task in a Systems Manager maintenance window. .DESCRIPTION Adds an AWS::SSM::MaintenanceWindowTask.MaintenanceWindowStepFunctionsParameters resource property to the template. The MaintenanceWindowStepFunctionsParameters property type specifies the parameters for the execution of a STEP_FUNCTIONS task in a Systems Manager maintenance window. MaintenanceWindowStepFunctionsParameters is a property of the TaskInvocationParameters: https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ssm-maintenancewindowtask-taskinvocationparameters.html property type. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ssm-maintenancewindowtask-maintenancewindowstepfunctionsparameters.html .PARAMETER Input The inputs for the STEP_FUNCTIONS task. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ssm-maintenancewindowtask-maintenancewindowstepfunctionsparameters.html#cfn-ssm-maintenancewindowtask-maintenancewindowstepfunctionsparameters-input PrimitiveType: String UpdateType: Mutable .PARAMETER Name The name of the STEP_FUNCTIONS task. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ssm-maintenancewindowtask-maintenancewindowstepfunctionsparameters.html#cfn-ssm-maintenancewindowtask-maintenancewindowstepfunctionsparameters-name PrimitiveType: String UpdateType: Mutable .FUNCTIONALITY Vaporshell #> [OutputType([SSMMaintenanceWindowTaskMaintenanceWindowStepFunctionsParameters])] [cmdletbinding()] Param( [parameter(Mandatory = $false)] [object] $Input, [parameter(Mandatory = $false)] [object] $Name ) Process { $obj = [SSMMaintenanceWindowTaskMaintenanceWindowStepFunctionsParameters]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSSSMMaintenanceWindowTaskMaintenanceWindowStepFunctionsParameters' function Add-VSSSMMaintenanceWindowTaskNotificationConfig { <# .SYNOPSIS Adds an AWS::SSM::MaintenanceWindowTask.NotificationConfig resource property to the template. The NotificationConfig property type specifies configurations for sending notifications for a maintenance window task in AWS Systems Manager. .DESCRIPTION Adds an AWS::SSM::MaintenanceWindowTask.NotificationConfig resource property to the template. The NotificationConfig property type specifies configurations for sending notifications for a maintenance window task in AWS Systems Manager. NotificationConfig is a property of the MaintenanceWindowRunCommandParameters: https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ssm-maintenancewindowtask-maintenancewindowruncommandparameters.html property type. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ssm-maintenancewindowtask-notificationconfig.html .PARAMETER NotificationArn An Amazon Resource Name ARN for an Amazon Simple Notification Service Amazon SNS topic. Run Command pushes notifications about command status changes to this topic. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ssm-maintenancewindowtask-notificationconfig.html#cfn-ssm-maintenancewindowtask-notificationconfig-notificationarn PrimitiveType: String UpdateType: Mutable .PARAMETER NotificationType The notification type. + Command: Receive notification when the status of a command changes. + Invocation: For commands sent to multiple instances, receive notification on a per-instance basis when the status of a command changes. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ssm-maintenancewindowtask-notificationconfig.html#cfn-ssm-maintenancewindowtask-notificationconfig-notificationtype PrimitiveType: String UpdateType: Mutable .PARAMETER NotificationEvents The different events that you can receive notifications for. These events include the following: All events, InProgress, Success, TimedOut, Cancelled, Failed. To learn more about these events, see Configuring Amazon SNS Notifications for AWS Systems Manager: https://docs.aws.amazon.com/systems-manager/latest/userguide/monitoring-sns-notifications.html in the *AWS Systems Manager User Guide*. PrimitiveItemType: String Type: List Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ssm-maintenancewindowtask-notificationconfig.html#cfn-ssm-maintenancewindowtask-notificationconfig-notificationevents UpdateType: Mutable .FUNCTIONALITY Vaporshell #> [OutputType([SSMMaintenanceWindowTaskNotificationConfig])] [cmdletbinding()] Param( [parameter(Mandatory = $true)] [object] $NotificationArn, [parameter(Mandatory = $false)] [object] $NotificationType, [parameter(Mandatory = $false)] $NotificationEvents ) Process { $obj = [SSMMaintenanceWindowTaskNotificationConfig]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSSSMMaintenanceWindowTaskNotificationConfig' function Add-VSSSMMaintenanceWindowTaskTarget { <# .SYNOPSIS Adds an AWS::SSM::MaintenanceWindowTask.Target resource property to the template. The Target property type specifies targets (either instances or window target IDs. You specify instances by using Key=InstanceIds,Values=<instanceid1>,<instanceid2>. You specify window target IDs using Key=WindowTargetIds,Values=<window-target-id-1>,<window-target-id-2> for a maintenance window task in AWS Systems Manager. .DESCRIPTION Adds an AWS::SSM::MaintenanceWindowTask.Target resource property to the template. The Target property type specifies targets (either instances or window target IDs. You specify instances by using Key=InstanceIds,Values=<instanceid1>,<instanceid2>. You specify window target IDs using Key=WindowTargetIds,Values=<window-target-id-1>,<window-target-id-2> for a maintenance window task in AWS Systems Manager. Target is a property of the AWS::SSM::MaintenanceWindowTask: https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ssm-maintenancewindowtask.html property type. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ssm-maintenancewindowtask-target.html .PARAMETER Values User-defined criteria that maps to Key. For example, if you specify InstanceIds, you can specify i-1234567890abcdef0,i-9876543210abcdef0 to run a command on two EC2 instances. For more information about how to target instances within a maintenance window task, see About 'register-task-with-maintenance-window' Options and Values: https://docs.aws.amazon.com/systems-manager/latest/userguide/register-tasks-options.html in the *AWS Systems Manager User Guide*. PrimitiveItemType: String Type: List Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ssm-maintenancewindowtask-target.html#cfn-ssm-maintenancewindowtask-target-values UpdateType: Mutable .PARAMETER Key User-defined criteria for sending commands that target instances that meet the criteria. Key can be InstanceIds or WindowTargetIds. For more information about how to target instances within a maintenance window task, see About 'register-task-with-maintenance-window' Options and Values: https://docs.aws.amazon.com/systems-manager/latest/userguide/register-tasks-options.html in the *AWS Systems Manager User Guide*. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ssm-maintenancewindowtask-target.html#cfn-ssm-maintenancewindowtask-target-key PrimitiveType: String UpdateType: Mutable .FUNCTIONALITY Vaporshell #> [OutputType([SSMMaintenanceWindowTaskTarget])] [cmdletbinding()] Param( [parameter(Mandatory = $false)] $Values, [parameter(Mandatory = $true)] [object] $Key ) Process { $obj = [SSMMaintenanceWindowTaskTarget]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSSSMMaintenanceWindowTaskTarget' function Add-VSSSMMaintenanceWindowTaskTaskInvocationParameters { <# .SYNOPSIS Adds an AWS::SSM::MaintenanceWindowTask.TaskInvocationParameters resource property to the template. The TaskInvocationParameters property type specifies the task execution parameters for a maintenance window task in AWS Systems Manager. .DESCRIPTION Adds an AWS::SSM::MaintenanceWindowTask.TaskInvocationParameters resource property to the template. The TaskInvocationParameters property type specifies the task execution parameters for a maintenance window task in AWS Systems Manager. TaskInvocationParameters is a property of the AWS::SSM::MaintenanceWindowTask: https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ssm-maintenancewindowtask.html property type. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ssm-maintenancewindowtask-taskinvocationparameters.html .PARAMETER MaintenanceWindowRunCommandParameters The parameters for a RUN_COMMAND task type. Type: MaintenanceWindowRunCommandParameters Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ssm-maintenancewindowtask-taskinvocationparameters.html#cfn-ssm-maintenancewindowtask-taskinvocationparameters-maintenancewindowruncommandparameters UpdateType: Mutable .PARAMETER MaintenanceWindowAutomationParameters The parameters for an AUTOMATION task type. Type: MaintenanceWindowAutomationParameters Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ssm-maintenancewindowtask-taskinvocationparameters.html#cfn-ssm-maintenancewindowtask-taskinvocationparameters-maintenancewindowautomationparameters UpdateType: Mutable .PARAMETER MaintenanceWindowStepFunctionsParameters The parameters for a STEP_FUNCTIONS task type. Type: MaintenanceWindowStepFunctionsParameters Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ssm-maintenancewindowtask-taskinvocationparameters.html#cfn-ssm-maintenancewindowtask-taskinvocationparameters-maintenancewindowstepfunctionsparameters UpdateType: Mutable .PARAMETER MaintenanceWindowLambdaParameters The parameters for a LAMBDA task type. Type: MaintenanceWindowLambdaParameters Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ssm-maintenancewindowtask-taskinvocationparameters.html#cfn-ssm-maintenancewindowtask-taskinvocationparameters-maintenancewindowlambdaparameters UpdateType: Mutable .FUNCTIONALITY Vaporshell #> [OutputType([SSMMaintenanceWindowTaskTaskInvocationParameters])] [cmdletbinding()] Param( [parameter(Mandatory = $false)] $MaintenanceWindowRunCommandParameters, [parameter(Mandatory = $false)] $MaintenanceWindowAutomationParameters, [parameter(Mandatory = $false)] $MaintenanceWindowStepFunctionsParameters, [parameter(Mandatory = $false)] $MaintenanceWindowLambdaParameters ) Process { $obj = [SSMMaintenanceWindowTaskTaskInvocationParameters]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSSSMMaintenanceWindowTaskTaskInvocationParameters' function Add-VSSSMPatchBaselinePatchFilter { <# .SYNOPSIS Adds an AWS::SSM::PatchBaseline.PatchFilter resource property to the template. The PatchFilter property type defines a patch filter for an AWS Systems Manager patch baseline. .DESCRIPTION Adds an AWS::SSM::PatchBaseline.PatchFilter resource property to the template. The PatchFilter property type defines a patch filter for an AWS Systems Manager patch baseline. The PatchFilters property of the PatchFilterGroup: https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ssm-patchbaseline-patchfiltergroup.html property type contains a list of PatchFilter property types. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ssm-patchbaseline-patchfilter.html .PARAMETER Values The value for the filter key. For information about valid values for each key based on operating system type, see PatchFilter: https://docs.aws.amazon.com/systems-manager/latest/APIReference/API_PatchFilter.html in the *AWS Systems Manager API Reference*. PrimitiveItemType: String Type: List Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ssm-patchbaseline-patchfilter.html#cfn-ssm-patchbaseline-patchfilter-values UpdateType: Mutable .PARAMETER Key The key for the filter. For information about valid keys, see PatchFilter: https://docs.aws.amazon.com/systems-manager/latest/APIReference/API_PatchFilter.html in the *AWS Systems Manager API Reference*. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ssm-patchbaseline-patchfilter.html#cfn-ssm-patchbaseline-patchfilter-key PrimitiveType: String UpdateType: Mutable .FUNCTIONALITY Vaporshell #> [OutputType([SSMPatchBaselinePatchFilter])] [cmdletbinding()] Param( [parameter(Mandatory = $false)] $Values, [parameter(Mandatory = $false)] [object] $Key ) Process { $obj = [SSMPatchBaselinePatchFilter]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSSSMPatchBaselinePatchFilter' function Add-VSSSMPatchBaselinePatchFilterGroup { <# .SYNOPSIS Adds an AWS::SSM::PatchBaseline.PatchFilterGroup resource property to the template. The PatchFilterGroup property type specifies a set of patch filters for an AWS Systems Manager patch baseline, typically used for approval rules for a Systems Manager patch baseline. .DESCRIPTION Adds an AWS::SSM::PatchBaseline.PatchFilterGroup resource property to the template. The PatchFilterGroup property type specifies a set of patch filters for an AWS Systems Manager patch baseline, typically used for approval rules for a Systems Manager patch baseline. PatchFilterGroup is the property type for the GlobalFilters property of the AWS::SSM::PatchBaseline: https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ssm-patchbaseline.html resource and the PatchFilterGroup property of the Rule: https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ssm-patchbaseline-rule.html property type. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ssm-patchbaseline-patchfiltergroup.html .PARAMETER PatchFilters The set of patch filters that make up the group. Type: List Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ssm-patchbaseline-patchfiltergroup.html#cfn-ssm-patchbaseline-patchfiltergroup-patchfilters ItemType: PatchFilter UpdateType: Mutable .FUNCTIONALITY Vaporshell #> [OutputType([SSMPatchBaselinePatchFilterGroup])] [cmdletbinding()] Param( [parameter(Mandatory = $false)] [object] $PatchFilters ) Process { $obj = [SSMPatchBaselinePatchFilterGroup]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSSSMPatchBaselinePatchFilterGroup' function Add-VSSSMPatchBaselinePatchSource { <# .SYNOPSIS Adds an AWS::SSM::PatchBaseline.PatchSource resource property to the template. PatchSource is the property type for the Sources resource of the AWS::SSM::PatchBaseline: https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ssm-patchbaseline.html resource. .DESCRIPTION Adds an AWS::SSM::PatchBaseline.PatchSource resource property to the template. PatchSource is the property type for the Sources resource of the AWS::SSM::PatchBaseline: https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ssm-patchbaseline.html resource. The AWS CloudFormation AWS::SSM::PatchSource resource is used to provide information about the patches to use to update target instances, including target operating systems and source repository. Applies to Linux instances only. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ssm-patchbaseline-patchsource.html .PARAMETER Products The specific operating system versions a patch repository applies to, such as "Ubuntu16.04", "AmazonLinux2016.09", "RedhatEnterpriseLinux7.2" or "Suse12.7". For lists of supported product values, see PatchFilter: https://docs.aws.amazon.com/systems-manager/latest/APIReference/API_PatchFilter.html in the *AWS Systems Manager API Reference*. PrimitiveItemType: String Type: List Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ssm-patchbaseline-patchsource.html#cfn-ssm-patchbaseline-patchsource-products UpdateType: Mutable .PARAMETER Configuration The value of the yum repo configuration. For example: main] cachedir=/var/cache/yum/$basesearch$releasever keepcache=0 debuglevel=2 Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ssm-patchbaseline-patchsource.html#cfn-ssm-patchbaseline-patchsource-configuration PrimitiveType: String UpdateType: Mutable .PARAMETER Name The name specified to identify the patch source. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ssm-patchbaseline-patchsource.html#cfn-ssm-patchbaseline-patchsource-name PrimitiveType: String UpdateType: Mutable .FUNCTIONALITY Vaporshell #> [OutputType([SSMPatchBaselinePatchSource])] [cmdletbinding()] Param( [parameter(Mandatory = $false)] $Products, [parameter(Mandatory = $false)] [object] $Configuration, [parameter(Mandatory = $false)] [object] $Name ) Process { $obj = [SSMPatchBaselinePatchSource]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSSSMPatchBaselinePatchSource' function Add-VSSSMPatchBaselinePatchStringDate { <# .SYNOPSIS Adds an AWS::SSM::PatchBaseline.PatchStringDate resource property to the template. .DESCRIPTION Adds an AWS::SSM::PatchBaseline.PatchStringDate resource property to the template. .LINK .FUNCTIONALITY Vaporshell #> [OutputType([SSMPatchBaselinePatchStringDate])] [cmdletbinding()] Param( ) Process { $obj = [SSMPatchBaselinePatchStringDate]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSSSMPatchBaselinePatchStringDate' function Add-VSSSMPatchBaselineRule { <# .SYNOPSIS Adds an AWS::SSM::PatchBaseline.Rule resource property to the template. The Rule property type specifies an approval rule for a Systems Manager patch baseline. .DESCRIPTION Adds an AWS::SSM::PatchBaseline.Rule resource property to the template. The Rule property type specifies an approval rule for a Systems Manager patch baseline. The PatchRules property of the RuleGroup: https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ssm-patchbaseline-rulegroup.html property type contains a list of Rule property types. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ssm-patchbaseline-rule.html .PARAMETER ApproveUntilDate Not currently supported by AWS CloudFormation. Type: PatchStringDate Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ssm-patchbaseline-rule.html#cfn-ssm-patchbaseline-rule-approveuntildate UpdateType: Mutable .PARAMETER EnableNonSecurity For instances identified by the approval rule filters, enables a patch baseline to apply non-security updates available in the specified repository. The default value is 'false'. Applies to Linux instances only. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ssm-patchbaseline-rule.html#cfn-ssm-patchbaseline-rule-enablenonsecurity PrimitiveType: Boolean UpdateType: Mutable .PARAMETER PatchFilterGroup The patch filter group that defines the criteria for the rule. Type: PatchFilterGroup Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ssm-patchbaseline-rule.html#cfn-ssm-patchbaseline-rule-patchfiltergroup UpdateType: Mutable .PARAMETER ApproveAfterDays The number of days after the release date of each patch matched by the rule that the patch is marked as approved in the patch baseline. For example, a value of 7 means that patches are approved seven days after they are released. You must specify a value for ApproveAfterDays. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ssm-patchbaseline-rule.html#cfn-ssm-patchbaseline-rule-approveafterdays PrimitiveType: Integer UpdateType: Mutable .PARAMETER ComplianceLevel A compliance severity level for all approved patches in a patch baseline. Valid compliance severity levels include the following: UNSPECIFIED, CRITICAL, HIGH, MEDIUM, LOW, and INFORMATIONAL. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ssm-patchbaseline-rule.html#cfn-ssm-patchbaseline-rule-compliancelevel PrimitiveType: String UpdateType: Mutable .FUNCTIONALITY Vaporshell #> [OutputType([SSMPatchBaselineRule])] [cmdletbinding()] Param( [parameter(Mandatory = $false)] $ApproveUntilDate, [parameter(Mandatory = $false)] [object] $EnableNonSecurity, [parameter(Mandatory = $false)] $PatchFilterGroup, [parameter(Mandatory = $false)] [object] $ApproveAfterDays, [parameter(Mandatory = $false)] [object] $ComplianceLevel ) Process { $obj = [SSMPatchBaselineRule]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSSSMPatchBaselineRule' function Add-VSSSMPatchBaselineRuleGroup { <# .SYNOPSIS Adds an AWS::SSM::PatchBaseline.RuleGroup resource property to the template. The RuleGroup property type specifies a set of rules that define the approval rules for an AWS Systems Manager patch baseline. .DESCRIPTION Adds an AWS::SSM::PatchBaseline.RuleGroup resource property to the template. The RuleGroup property type specifies a set of rules that define the approval rules for an AWS Systems Manager patch baseline. RuleGroup is the property type for the ApprovalRules property of the AWS::SSM::PatchBaseline: https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ssm-patchbaseline.html resource. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ssm-patchbaseline-rulegroup.html .PARAMETER PatchRules The rules that make up the rule group. Type: List Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ssm-patchbaseline-rulegroup.html#cfn-ssm-patchbaseline-rulegroup-patchrules ItemType: Rule UpdateType: Mutable .FUNCTIONALITY Vaporshell #> [OutputType([SSMPatchBaselineRuleGroup])] [cmdletbinding()] Param( [parameter(Mandatory = $false)] [object] $PatchRules ) Process { $obj = [SSMPatchBaselineRuleGroup]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSSSMPatchBaselineRuleGroup' function Add-VSSSMResourceDataSyncAwsOrganizationsSource { <# .SYNOPSIS Adds an AWS::SSM::ResourceDataSync.AwsOrganizationsSource resource property to the template. Information about the AwsOrganizationsSource resource data sync source. A sync source of this type can synchronize data from AWS Organizations or, if an AWS Organization is not present, from multiple AWS Regions. .DESCRIPTION Adds an AWS::SSM::ResourceDataSync.AwsOrganizationsSource resource property to the template. Information about the AwsOrganizationsSource resource data sync source. A sync source of this type can synchronize data from AWS Organizations or, if an AWS Organization is not present, from multiple AWS Regions. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ssm-resourcedatasync-awsorganizationssource.html .PARAMETER OrganizationSourceType If an AWS Organization is present, this is either OrganizationalUnits or EntireOrganization. For OrganizationalUnits, the data is aggregated from a set of organization units. For EntireOrganization, the data is aggregated from the entire AWS Organization. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ssm-resourcedatasync-awsorganizationssource.html#cfn-ssm-resourcedatasync-awsorganizationssource-organizationsourcetype PrimitiveType: String UpdateType: Immutable .PARAMETER OrganizationalUnits The AWS Organizations organization units included in the sync. PrimitiveItemType: String Type: List Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ssm-resourcedatasync-awsorganizationssource.html#cfn-ssm-resourcedatasync-awsorganizationssource-organizationalunits UpdateType: Mutable .FUNCTIONALITY Vaporshell #> [OutputType([SSMResourceDataSyncAwsOrganizationsSource])] [cmdletbinding()] Param( [parameter(Mandatory = $true)] [object] $OrganizationSourceType, [parameter(Mandatory = $false)] $OrganizationalUnits ) Process { $obj = [SSMResourceDataSyncAwsOrganizationsSource]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSSSMResourceDataSyncAwsOrganizationsSource' function Add-VSSSMResourceDataSyncS3Destination { <# .SYNOPSIS Adds an AWS::SSM::ResourceDataSync.S3Destination resource property to the template. Information about the target S3 bucket for the Resource Data Sync. .DESCRIPTION Adds an AWS::SSM::ResourceDataSync.S3Destination resource property to the template. Information about the target S3 bucket for the Resource Data Sync. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ssm-resourcedatasync-s3destination.html .PARAMETER KMSKeyArn The ARN of an encryption key for a destination in Amazon S3. Must belong to the same Region as the destination S3 bucket. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ssm-resourcedatasync-s3destination.html#cfn-ssm-resourcedatasync-s3destination-kmskeyarn PrimitiveType: String UpdateType: Immutable .PARAMETER BucketName The name of the S3 bucket where the aggregated data is stored. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ssm-resourcedatasync-s3destination.html#cfn-ssm-resourcedatasync-s3destination-bucketname PrimitiveType: String UpdateType: Immutable .PARAMETER BucketRegion The AWS Region with the S3 bucket targeted by the Resource Data Sync. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ssm-resourcedatasync-s3destination.html#cfn-ssm-resourcedatasync-s3destination-bucketregion PrimitiveType: String UpdateType: Immutable .PARAMETER SyncFormat A supported sync format. The following format is currently supported: JsonSerDe Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ssm-resourcedatasync-s3destination.html#cfn-ssm-resourcedatasync-s3destination-syncformat PrimitiveType: String UpdateType: Immutable .PARAMETER BucketPrefix An Amazon S3 prefix for the bucket. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ssm-resourcedatasync-s3destination.html#cfn-ssm-resourcedatasync-s3destination-bucketprefix PrimitiveType: String UpdateType: Immutable .FUNCTIONALITY Vaporshell #> [OutputType([SSMResourceDataSyncS3Destination])] [cmdletbinding()] Param( [parameter(Mandatory = $false)] [object] $KMSKeyArn, [parameter(Mandatory = $true)] [object] $BucketName, [parameter(Mandatory = $true)] [object] $BucketRegion, [parameter(Mandatory = $true)] [object] $SyncFormat, [parameter(Mandatory = $false)] [object] $BucketPrefix ) Process { $obj = [SSMResourceDataSyncS3Destination]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSSSMResourceDataSyncS3Destination' function Add-VSSSMResourceDataSyncSyncSource { <# .SYNOPSIS Adds an AWS::SSM::ResourceDataSync.SyncSource resource property to the template. Information about the source of the data included in the resource data sync. .DESCRIPTION Adds an AWS::SSM::ResourceDataSync.SyncSource resource property to the template. Information about the source of the data included in the resource data sync. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ssm-resourcedatasync-syncsource.html .PARAMETER SourceType The type of data source for the resource data sync. SourceType is either AwsOrganizations if an organization is present in AWS Organizations or singleAccountMultiRegions. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ssm-resourcedatasync-syncsource.html#cfn-ssm-resourcedatasync-syncsource-sourcetype PrimitiveType: String UpdateType: Immutable .PARAMETER AwsOrganizationsSource Information about the AwsOrganizationsSource resource data sync source. A sync source of this type can synchronize data from AWS Organizations. Type: AwsOrganizationsSource Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ssm-resourcedatasync-syncsource.html#cfn-ssm-resourcedatasync-syncsource-awsorganizationssource UpdateType: Mutable .PARAMETER IncludeFutureRegions Whether to automatically synchronize and aggregate data from new AWS Regions when those Regions come online. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ssm-resourcedatasync-syncsource.html#cfn-ssm-resourcedatasync-syncsource-includefutureregions PrimitiveType: Boolean UpdateType: Mutable .PARAMETER SourceRegions The SyncSource AWS Regions included in the resource data sync. PrimitiveItemType: String Type: List Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ssm-resourcedatasync-syncsource.html#cfn-ssm-resourcedatasync-syncsource-sourceregions UpdateType: Mutable .FUNCTIONALITY Vaporshell #> [OutputType([SSMResourceDataSyncSyncSource])] [cmdletbinding()] Param( [parameter(Mandatory = $true)] [object] $SourceType, [parameter(Mandatory = $false)] $AwsOrganizationsSource, [parameter(Mandatory = $false)] [object] $IncludeFutureRegions, [parameter(Mandatory = $true)] $SourceRegions ) Process { $obj = [SSMResourceDataSyncSyncSource]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSSSMResourceDataSyncSyncSource' function New-VSSSMAssociation { <# .SYNOPSIS Adds an AWS::SSM::Association resource to the template. The AWS::SSM::Association resource associates an SSM document in AWS Systems Manager with managed instances that contain a configuration agent to process the document. .DESCRIPTION Adds an AWS::SSM::Association resource to the template. The AWS::SSM::Association resource associates an SSM document in AWS Systems Manager with managed instances that contain a configuration agent to process the document. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ssm-association.html .PARAMETER LogicalId The logical ID must be alphanumeric (A-Za-z0-9) and unique within the template. Use the logical name to reference the resource in other parts of the template. For example, if you want to map an Amazon Elastic Block Store volume to an Amazon EC2 instance, you reference the logical IDs to associate the block stores with the instance. .PARAMETER AssociationName The name of the association. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ssm-association.html#cfn-ssm-association-associationname UpdateType: Mutable PrimitiveType: String .PARAMETER DocumentVersion The version of the SSM document to associate with the target. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ssm-association.html#cfn-ssm-association-documentversion UpdateType: Mutable PrimitiveType: String .PARAMETER InstanceId The ID of the instance that the SSM document is associated with. You must specify the InstanceId or Targets property. InstanceId has been deprecated. To specify an instance ID for an association, use the Targets parameter. If you use the parameter InstanceId, you cannot use the parameters AssociationName, DocumentVersion, MaxErrors, MaxConcurrency, OutputLocation, or ScheduleExpression. To use these parameters, you must use the Targets parameter. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ssm-association.html#cfn-ssm-association-instanceid UpdateType: Mutable PrimitiveType: String .PARAMETER Name The name of the Systems Manager document. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ssm-association.html#cfn-ssm-association-name UpdateType: Mutable PrimitiveType: String .PARAMETER Parameters The parameters for the runtime configuration of the document. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ssm-association.html#cfn-ssm-association-parameters UpdateType: Mutable Type: Map ItemType: ParameterValues .PARAMETER ScheduleExpression A cron expression that specifies a schedule when the association runs. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ssm-association.html#cfn-ssm-association-scheduleexpression UpdateType: Mutable PrimitiveType: String .PARAMETER Targets The targets for the association. You must specify the InstanceId or Targets property. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ssm-association.html#cfn-ssm-association-targets UpdateType: Mutable Type: List ItemType: Target .PARAMETER OutputLocation An S3 bucket where you want to store the output details of the request. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ssm-association.html#cfn-ssm-association-outputlocation UpdateType: Mutable Type: InstanceAssociationOutputLocation .PARAMETER AutomationTargetParameterName + Reference: Cron and Rate Expressions for Systems Manager: https://docs.aws.amazon.com/systems-manager/latest/userguide/reference-cron-and-rate-expressions.html Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ssm-association.html#cfn-ssm-association-automationtargetparametername UpdateType: Mutable PrimitiveType: String .PARAMETER MaxErrors + Reference: Cron and Rate Expressions for Systems Manager: https://docs.aws.amazon.com/systems-manager/latest/userguide/reference-cron-and-rate-expressions.html Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ssm-association.html#cfn-ssm-association-maxerrors UpdateType: Mutable PrimitiveType: String .PARAMETER MaxConcurrency + Reference: Cron and Rate Expressions for Systems Manager: https://docs.aws.amazon.com/systems-manager/latest/userguide/reference-cron-and-rate-expressions.html Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ssm-association.html#cfn-ssm-association-maxconcurrency UpdateType: Mutable PrimitiveType: String .PARAMETER ComplianceSeverity + Reference: Cron and Rate Expressions for Systems Manager: https://docs.aws.amazon.com/systems-manager/latest/userguide/reference-cron-and-rate-expressions.html Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ssm-association.html#cfn-ssm-association-complianceseverity UpdateType: Mutable PrimitiveType: String .PARAMETER SyncCompliance + Reference: Cron and Rate Expressions for Systems Manager: https://docs.aws.amazon.com/systems-manager/latest/userguide/reference-cron-and-rate-expressions.html Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ssm-association.html#cfn-ssm-association-synccompliance UpdateType: Mutable PrimitiveType: String .PARAMETER WaitForSuccessTimeoutSeconds + Reference: Cron and Rate Expressions for Systems Manager: https://docs.aws.amazon.com/systems-manager/latest/userguide/reference-cron-and-rate-expressions.html Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ssm-association.html#cfn-ssm-association-waitforsuccesstimeoutseconds UpdateType: Mutable PrimitiveType: Integer .PARAMETER ApplyOnlyAtCronInterval + Reference: Cron and Rate Expressions for Systems Manager: https://docs.aws.amazon.com/systems-manager/latest/userguide/reference-cron-and-rate-expressions.html Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ssm-association.html#cfn-ssm-association-applyonlyatcroninterval UpdateType: Mutable PrimitiveType: Boolean .PARAMETER DeletionPolicy With the DeletionPolicy attribute you can preserve or (in some cases) backup a resource when its stack is deleted. You specify a DeletionPolicy attribute for each resource that you want to control. If a resource has no DeletionPolicy attribute, AWS CloudFormation deletes the resource by default. To keep a resource when its stack is deleted, specify Retain for that resource. You can use retain for any resource. For example, you can retain a nested stack, S3 bucket, or EC2 instance so that you can continue to use or modify those resources after you delete their stacks. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER UpdateReplacePolicy Use the UpdateReplacePolicy attribute to retain or (in some cases) backup the existing physical instance of a resource when it is replaced during a stack update operation. When you initiate a stack update, AWS CloudFormation updates resources based on differences between what you submit and the stack's current template and parameters. If you update a resource property that requires that the resource be replaced, AWS CloudFormation recreates the resource during the update. Recreating the resource generates a new physical ID. AWS CloudFormation creates the replacement resource first, and then changes references from other dependent resources to point to the replacement resource. By default, AWS CloudFormation then deletes the old resource. Using the UpdateReplacePolicy, you can specify that AWS CloudFormation retain or (in some cases) create a snapshot of the old resource. For resources that support snapshots, such as AWS::EC2::Volume, specify Snapshot to have AWS CloudFormation create a snapshot before deleting the old resource instance. You can apply the UpdateReplacePolicy attribute to any resource. UpdateReplacePolicy is only executed if you update a resource property whose update behavior is specified as Replacement, thereby causing AWS CloudFormation to replace the old resource with a new one with a new physical ID. For example, if you update the Engine property of an AWS::RDS::DBInstance resource type, AWS CloudFormation creates a new resource and replaces the current DB instance resource with the new one. The UpdateReplacePolicy attribute would then dictate whether AWS CloudFormation deleted, retained, or created a snapshot of the old DB instance. The update behavior for each property of a resource is specified in the reference topic for that resource in the AWS Resource and Property Types Reference. For more information on resource update behavior, see Update Behaviors of Stack Resources. The UpdateReplacePolicy attribute applies to stack updates you perform directly, as well as stack updates performed using change sets. Note Resources that are retained continue to exist and continue to incur applicable charges until you delete those resources. Snapshots that are created with this policy continue to exist and continue to incur applicable charges until you delete those snapshots. UpdateReplacePolicy retains the old physical resource or snapshot, but removes it from AWS CloudFormation's scope. UpdateReplacePolicy differs from the DeletionPolicy attribute in that it only applies to resources replaced during stack updates. Use DeletionPolicy for resources deleted when a stack is deleted, or when the resource definition itself is deleted from the template as part of a stack update. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER DependsOn With the DependsOn attribute you can specify that the creation of a specific resource follows another. When you add a DependsOn attribute to a resource, that resource is created only after the creation of the resource specified in the DependsOn attribute. This parameter takes a string or list of strings representing Logical IDs of resources that must be created prior to this resource being created. .PARAMETER Metadata The Metadata attribute enables you to associate structured data with a resource. By adding a Metadata attribute to a resource, you can add data in JSON or YAML to the resource declaration. In addition, you can use intrinsic functions (such as GetAtt and Ref), parameters, and pseudo parameters within the Metadata attribute to add those interpreted values. This will be returned when describing the resource using AWS CLI. .PARAMETER UpdatePolicy Use the UpdatePolicy attribute to specify how AWS CloudFormation handles updates to the AWS::AutoScaling::AutoScalingGroup resource. AWS CloudFormation invokes one of three update policies depending on the type of change you make or whether a scheduled action is associated with the Auto Scaling group. You must use the "Add-UpdatePolicy" function or the [UpdatePolicy] class here. .PARAMETER Condition Logical ID of the condition that this resource needs to be true in order for this resource to be provisioned. .FUNCTIONALITY Vaporshell #> [OutputType([SSMAssociation])] [cmdletbinding()] Param( [parameter(Mandatory = $true,Position = 0)] [ValidateLogicalId()] [string] $LogicalId, [parameter(Mandatory = $false)] [object] $AssociationName, [parameter(Mandatory = $false)] [object] $DocumentVersion, [parameter(Mandatory = $false)] [object] $InstanceId, [parameter(Mandatory = $true)] [object] $Name, [parameter(Mandatory = $false)] [object] $Parameters, [parameter(Mandatory = $false)] [object] $ScheduleExpression, [parameter(Mandatory = $false)] [object] $Targets, [parameter(Mandatory = $false)] $OutputLocation, [parameter(Mandatory = $false)] [object] $AutomationTargetParameterName, [parameter(Mandatory = $false)] [object] $MaxErrors, [parameter(Mandatory = $false)] [object] $MaxConcurrency, [parameter(Mandatory = $false)] [object] $ComplianceSeverity, [parameter(Mandatory = $false)] [object] $SyncCompliance, [parameter(Mandatory = $false)] [object] $WaitForSuccessTimeoutSeconds, [parameter(Mandatory = $false)] [object] $ApplyOnlyAtCronInterval, [parameter()] [DeletionPolicy] $DeletionPolicy, [parameter()] [UpdateReplacePolicy] $UpdateReplacePolicy, [parameter(Mandatory = $false)] [string[]] $DependsOn, [parameter(Mandatory = $false)] [VSJson] $Metadata, [parameter(Mandatory = $false)] [UpdatePolicy] $UpdatePolicy, [parameter(Mandatory = $false)] [string] $Condition ) Process { $obj = [SSMAssociation]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'New-VSSSMAssociation' function New-VSSSMDocument { <# .SYNOPSIS Adds an AWS::SSM::Document resource to the template. The AWS::SSM::Document resource creates an SSM document in AWS Systems Manager that defines the actions that Systems Manager performs, which you can use to set up and run commands on your instances. .DESCRIPTION Adds an AWS::SSM::Document resource to the template. The AWS::SSM::Document resource creates an SSM document in AWS Systems Manager that defines the actions that Systems Manager performs, which you can use to set up and run commands on your instances. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ssm-document.html .PARAMETER LogicalId The logical ID must be alphanumeric (A-Za-z0-9) and unique within the template. Use the logical name to reference the resource in other parts of the template. For example, if you want to map an Amazon Elastic Block Store volume to an Amazon EC2 instance, you reference the logical IDs to associate the block stores with the instance. .PARAMETER Content The content for the new SSM document in JSON or YAML format. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ssm-document.html#cfn-ssm-document-content PrimitiveType: Json UpdateType: Immutable .PARAMETER DocumentType The type of document to create. *Allowed Values*: ApplicationConfigurationSchema | Automation | ChangeCalendar | Command | DeploymentStrategy | Package | Policy | Session Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ssm-document.html#cfn-ssm-document-documenttype PrimitiveType: String UpdateType: Immutable .PARAMETER Name A name for the Systems Manager document. You can't use the following strings as document name prefixes. These are reserved by AWS for use as document name prefixes: + aws + amazon + amzn Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ssm-document.html#cfn-ssm-document-name PrimitiveType: String UpdateType: Immutable .PARAMETER Tags AWS CloudFormation resource tags to apply to the document. Use tags to help you identify and categorize resources. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ssm-document.html#cfn-ssm-document-tags DuplicatesAllowed: True ItemType: Tag Type: List UpdateType: Mutable .PARAMETER DeletionPolicy With the DeletionPolicy attribute you can preserve or (in some cases) backup a resource when its stack is deleted. You specify a DeletionPolicy attribute for each resource that you want to control. If a resource has no DeletionPolicy attribute, AWS CloudFormation deletes the resource by default. To keep a resource when its stack is deleted, specify Retain for that resource. You can use retain for any resource. For example, you can retain a nested stack, S3 bucket, or EC2 instance so that you can continue to use or modify those resources after you delete their stacks. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER UpdateReplacePolicy Use the UpdateReplacePolicy attribute to retain or (in some cases) backup the existing physical instance of a resource when it is replaced during a stack update operation. When you initiate a stack update, AWS CloudFormation updates resources based on differences between what you submit and the stack's current template and parameters. If you update a resource property that requires that the resource be replaced, AWS CloudFormation recreates the resource during the update. Recreating the resource generates a new physical ID. AWS CloudFormation creates the replacement resource first, and then changes references from other dependent resources to point to the replacement resource. By default, AWS CloudFormation then deletes the old resource. Using the UpdateReplacePolicy, you can specify that AWS CloudFormation retain or (in some cases) create a snapshot of the old resource. For resources that support snapshots, such as AWS::EC2::Volume, specify Snapshot to have AWS CloudFormation create a snapshot before deleting the old resource instance. You can apply the UpdateReplacePolicy attribute to any resource. UpdateReplacePolicy is only executed if you update a resource property whose update behavior is specified as Replacement, thereby causing AWS CloudFormation to replace the old resource with a new one with a new physical ID. For example, if you update the Engine property of an AWS::RDS::DBInstance resource type, AWS CloudFormation creates a new resource and replaces the current DB instance resource with the new one. The UpdateReplacePolicy attribute would then dictate whether AWS CloudFormation deleted, retained, or created a snapshot of the old DB instance. The update behavior for each property of a resource is specified in the reference topic for that resource in the AWS Resource and Property Types Reference. For more information on resource update behavior, see Update Behaviors of Stack Resources. The UpdateReplacePolicy attribute applies to stack updates you perform directly, as well as stack updates performed using change sets. Note Resources that are retained continue to exist and continue to incur applicable charges until you delete those resources. Snapshots that are created with this policy continue to exist and continue to incur applicable charges until you delete those snapshots. UpdateReplacePolicy retains the old physical resource or snapshot, but removes it from AWS CloudFormation's scope. UpdateReplacePolicy differs from the DeletionPolicy attribute in that it only applies to resources replaced during stack updates. Use DeletionPolicy for resources deleted when a stack is deleted, or when the resource definition itself is deleted from the template as part of a stack update. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER DependsOn With the DependsOn attribute you can specify that the creation of a specific resource follows another. When you add a DependsOn attribute to a resource, that resource is created only after the creation of the resource specified in the DependsOn attribute. This parameter takes a string or list of strings representing Logical IDs of resources that must be created prior to this resource being created. .PARAMETER Metadata The Metadata attribute enables you to associate structured data with a resource. By adding a Metadata attribute to a resource, you can add data in JSON or YAML to the resource declaration. In addition, you can use intrinsic functions (such as GetAtt and Ref), parameters, and pseudo parameters within the Metadata attribute to add those interpreted values. This will be returned when describing the resource using AWS CLI. .PARAMETER UpdatePolicy Use the UpdatePolicy attribute to specify how AWS CloudFormation handles updates to the AWS::AutoScaling::AutoScalingGroup resource. AWS CloudFormation invokes one of three update policies depending on the type of change you make or whether a scheduled action is associated with the Auto Scaling group. You must use the "Add-UpdatePolicy" function or the [UpdatePolicy] class here. .PARAMETER Condition Logical ID of the condition that this resource needs to be true in order for this resource to be provisioned. .FUNCTIONALITY Vaporshell #> [OutputType([SSMDocument])] [cmdletbinding()] Param( [parameter(Mandatory = $true,Position = 0)] [ValidateLogicalId()] [string] $LogicalId, [parameter(Mandatory = $true)] [VSJson] $Content, [parameter(Mandatory = $false)] [object] $DocumentType, [parameter(Mandatory = $false)] [object] $Name, [TransformTag()] [object] [parameter(Mandatory = $false)] $Tags, [parameter()] [DeletionPolicy] $DeletionPolicy, [parameter()] [UpdateReplacePolicy] $UpdateReplacePolicy, [parameter(Mandatory = $false)] [string[]] $DependsOn, [parameter(Mandatory = $false)] [VSJson] $Metadata, [parameter(Mandatory = $false)] [UpdatePolicy] $UpdatePolicy, [parameter(Mandatory = $false)] [string] $Condition ) Process { $obj = [SSMDocument]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'New-VSSSMDocument' function New-VSSSMMaintenanceWindow { <# .SYNOPSIS Adds an AWS::SSM::MaintenanceWindow resource to the template. The AWS::SSM::MaintenanceWindow resource represents general information about a maintenance window for AWS Systems Manager. Maintenance Windows let you define a schedule for when to perform potentially disruptive actions on your instances, such as patching an operating system (OS, updating drivers, or installing software. Each maintenance window has a schedule, a duration, a set of registered targets, and a set of registered tasks. .DESCRIPTION Adds an AWS::SSM::MaintenanceWindow resource to the template. The AWS::SSM::MaintenanceWindow resource represents general information about a maintenance window for AWS Systems Manager. Maintenance Windows let you define a schedule for when to perform potentially disruptive actions on your instances, such as patching an operating system (OS, updating drivers, or installing software. Each maintenance window has a schedule, a duration, a set of registered targets, and a set of registered tasks. For more information, see Systems Manager Maintenance Windows: https://docs.aws.amazon.com/systems-manager/latest/userguide/systems-manager-maintenance.html in the *AWS Systems Manager User Guide* and CreateMaintenanceWindow: https://docs.aws.amazon.com/systems-manager/latest/APIReference/API_CreateMaintenanceWindow.html in the *AWS Systems Manager API Reference*. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ssm-maintenancewindow.html .PARAMETER LogicalId The logical ID must be alphanumeric (A-Za-z0-9) and unique within the template. Use the logical name to reference the resource in other parts of the template. For example, if you want to map an Amazon Elastic Block Store volume to an Amazon EC2 instance, you reference the logical IDs to associate the block stores with the instance. .PARAMETER StartDate The date and time, in ISO-8601 Extended format, for when the maintenance window is scheduled to become active. StartDate allows you to delay activation of the Maintenance Window until the specified future date. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ssm-maintenancewindow.html#cfn-ssm-maintenancewindow-startdate PrimitiveType: String UpdateType: Mutable .PARAMETER Description A description of the maintenance window. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ssm-maintenancewindow.html#cfn-ssm-maintenancewindow-description PrimitiveType: String UpdateType: Mutable .PARAMETER AllowUnassociatedTargets Enables a maintenance window task to run on managed instances, even if you have not registered those instances as targets. If enabled, then you must specify the unregistered instances by instance ID when you register a task with the maintenance window. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ssm-maintenancewindow.html#cfn-ssm-maintenancewindow-allowunassociatedtargets PrimitiveType: Boolean UpdateType: Mutable .PARAMETER Cutoff The number of hours before the end of the maintenance window that Systems Manager stops scheduling new tasks for execution. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ssm-maintenancewindow.html#cfn-ssm-maintenancewindow-cutoff PrimitiveType: Integer UpdateType: Mutable .PARAMETER Schedule The schedule of the maintenance window in the form of a cron or rate expression. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ssm-maintenancewindow.html#cfn-ssm-maintenancewindow-schedule PrimitiveType: String UpdateType: Mutable .PARAMETER Duration The duration of the maintenance window in hours. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ssm-maintenancewindow.html#cfn-ssm-maintenancewindow-duration PrimitiveType: Integer UpdateType: Mutable .PARAMETER ScheduleOffset + Reference: Cron and Rate Expressions for Systems Manager: https://docs.aws.amazon.com/systems-manager/latest/userguide/reference-cron-and-rate-expressions.html Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ssm-maintenancewindow.html#cfn-ssm-maintenancewindow-scheduleoffset PrimitiveType: Integer UpdateType: Mutable .PARAMETER EndDate The date and time, in ISO-8601 Extended format, for when the maintenance window is scheduled to become inactive. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ssm-maintenancewindow.html#cfn-ssm-maintenancewindow-enddate PrimitiveType: String UpdateType: Mutable .PARAMETER Tags Optional metadata that you assign to a resource in the form of an arbitrary set of tags key-value pairs. Tags enable you to categorize a resource in different ways, such as by purpose, owner, or environment. For example, you might want to tag a maintenance window to identify the type of tasks it will run, the types of targets, and the environment it will run in. Type: List Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ssm-maintenancewindow.html#cfn-ssm-maintenancewindow-tags ItemType: Tag UpdateType: Mutable .PARAMETER Name The name of the maintenance window. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ssm-maintenancewindow.html#cfn-ssm-maintenancewindow-name PrimitiveType: String UpdateType: Mutable .PARAMETER ScheduleTimezone The time zone that the scheduled maintenance window executions are based on, in Internet Assigned Numbers Authority IANA format. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ssm-maintenancewindow.html#cfn-ssm-maintenancewindow-scheduletimezone PrimitiveType: String UpdateType: Mutable .PARAMETER DeletionPolicy With the DeletionPolicy attribute you can preserve or (in some cases) backup a resource when its stack is deleted. You specify a DeletionPolicy attribute for each resource that you want to control. If a resource has no DeletionPolicy attribute, AWS CloudFormation deletes the resource by default. To keep a resource when its stack is deleted, specify Retain for that resource. You can use retain for any resource. For example, you can retain a nested stack, S3 bucket, or EC2 instance so that you can continue to use or modify those resources after you delete their stacks. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER UpdateReplacePolicy Use the UpdateReplacePolicy attribute to retain or (in some cases) backup the existing physical instance of a resource when it is replaced during a stack update operation. When you initiate a stack update, AWS CloudFormation updates resources based on differences between what you submit and the stack's current template and parameters. If you update a resource property that requires that the resource be replaced, AWS CloudFormation recreates the resource during the update. Recreating the resource generates a new physical ID. AWS CloudFormation creates the replacement resource first, and then changes references from other dependent resources to point to the replacement resource. By default, AWS CloudFormation then deletes the old resource. Using the UpdateReplacePolicy, you can specify that AWS CloudFormation retain or (in some cases) create a snapshot of the old resource. For resources that support snapshots, such as AWS::EC2::Volume, specify Snapshot to have AWS CloudFormation create a snapshot before deleting the old resource instance. You can apply the UpdateReplacePolicy attribute to any resource. UpdateReplacePolicy is only executed if you update a resource property whose update behavior is specified as Replacement, thereby causing AWS CloudFormation to replace the old resource with a new one with a new physical ID. For example, if you update the Engine property of an AWS::RDS::DBInstance resource type, AWS CloudFormation creates a new resource and replaces the current DB instance resource with the new one. The UpdateReplacePolicy attribute would then dictate whether AWS CloudFormation deleted, retained, or created a snapshot of the old DB instance. The update behavior for each property of a resource is specified in the reference topic for that resource in the AWS Resource and Property Types Reference. For more information on resource update behavior, see Update Behaviors of Stack Resources. The UpdateReplacePolicy attribute applies to stack updates you perform directly, as well as stack updates performed using change sets. Note Resources that are retained continue to exist and continue to incur applicable charges until you delete those resources. Snapshots that are created with this policy continue to exist and continue to incur applicable charges until you delete those snapshots. UpdateReplacePolicy retains the old physical resource or snapshot, but removes it from AWS CloudFormation's scope. UpdateReplacePolicy differs from the DeletionPolicy attribute in that it only applies to resources replaced during stack updates. Use DeletionPolicy for resources deleted when a stack is deleted, or when the resource definition itself is deleted from the template as part of a stack update. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER DependsOn With the DependsOn attribute you can specify that the creation of a specific resource follows another. When you add a DependsOn attribute to a resource, that resource is created only after the creation of the resource specified in the DependsOn attribute. This parameter takes a string or list of strings representing Logical IDs of resources that must be created prior to this resource being created. .PARAMETER Metadata The Metadata attribute enables you to associate structured data with a resource. By adding a Metadata attribute to a resource, you can add data in JSON or YAML to the resource declaration. In addition, you can use intrinsic functions (such as GetAtt and Ref), parameters, and pseudo parameters within the Metadata attribute to add those interpreted values. This will be returned when describing the resource using AWS CLI. .PARAMETER UpdatePolicy Use the UpdatePolicy attribute to specify how AWS CloudFormation handles updates to the AWS::AutoScaling::AutoScalingGroup resource. AWS CloudFormation invokes one of three update policies depending on the type of change you make or whether a scheduled action is associated with the Auto Scaling group. You must use the "Add-UpdatePolicy" function or the [UpdatePolicy] class here. .PARAMETER Condition Logical ID of the condition that this resource needs to be true in order for this resource to be provisioned. .FUNCTIONALITY Vaporshell #> [OutputType([SSMMaintenanceWindow])] [cmdletbinding()] Param( [parameter(Mandatory = $true,Position = 0)] [ValidateLogicalId()] [string] $LogicalId, [parameter(Mandatory = $false)] [object] $StartDate, [parameter(Mandatory = $false)] [object] $Description, [parameter(Mandatory = $true)] [object] $AllowUnassociatedTargets, [parameter(Mandatory = $true)] [object] $Cutoff, [parameter(Mandatory = $true)] [object] $Schedule, [parameter(Mandatory = $true)] [object] $Duration, [parameter(Mandatory = $false)] [object] $ScheduleOffset, [parameter(Mandatory = $false)] [object] $EndDate, [TransformTag()] [object] [parameter(Mandatory = $false)] $Tags, [parameter(Mandatory = $true)] [object] $Name, [parameter(Mandatory = $false)] [object] $ScheduleTimezone, [parameter()] [DeletionPolicy] $DeletionPolicy, [parameter()] [UpdateReplacePolicy] $UpdateReplacePolicy, [parameter(Mandatory = $false)] [string[]] $DependsOn, [parameter(Mandatory = $false)] [VSJson] $Metadata, [parameter(Mandatory = $false)] [UpdatePolicy] $UpdatePolicy, [parameter(Mandatory = $false)] [string] $Condition ) Process { $obj = [SSMMaintenanceWindow]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'New-VSSSMMaintenanceWindow' function New-VSSSMMaintenanceWindowTarget { <# .SYNOPSIS Adds an AWS::SSM::MaintenanceWindowTarget resource to the template. The AWS::SSM::MaintenanceWindowTarget resource registers a target with a maintenance window for AWS Systems Manager. For more information, see RegisterTargetWithMaintenanceWindow: https://docs.aws.amazon.com/systems-manager/latest/APIReference/API_RegisterTargetWithMaintenanceWindow.html in the *AWS Systems Manager API Reference*. .DESCRIPTION Adds an AWS::SSM::MaintenanceWindowTarget resource to the template. The AWS::SSM::MaintenanceWindowTarget resource registers a target with a maintenance window for AWS Systems Manager. For more information, see RegisterTargetWithMaintenanceWindow: https://docs.aws.amazon.com/systems-manager/latest/APIReference/API_RegisterTargetWithMaintenanceWindow.html in the *AWS Systems Manager API Reference*. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ssm-maintenancewindowtarget.html .PARAMETER LogicalId The logical ID must be alphanumeric (A-Za-z0-9) and unique within the template. Use the logical name to reference the resource in other parts of the template. For example, if you want to map an Amazon Elastic Block Store volume to an Amazon EC2 instance, you reference the logical IDs to associate the block stores with the instance. .PARAMETER OwnerInformation A user-provided value that will be included in any CloudWatch events that are raised while running tasks for these targets in this maintenance window. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ssm-maintenancewindowtarget.html#cfn-ssm-maintenancewindowtarget-ownerinformation PrimitiveType: String UpdateType: Mutable .PARAMETER Description A description for the target. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ssm-maintenancewindowtarget.html#cfn-ssm-maintenancewindowtarget-description PrimitiveType: String UpdateType: Mutable .PARAMETER WindowId The ID of the maintenance window to register the target with. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ssm-maintenancewindowtarget.html#cfn-ssm-maintenancewindowtarget-windowid PrimitiveType: String UpdateType: Immutable .PARAMETER ResourceType The type of target that is being registered with the maintenance window. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ssm-maintenancewindowtarget.html#cfn-ssm-maintenancewindowtarget-resourcetype PrimitiveType: String UpdateType: Mutable .PARAMETER Targets The targets to register with the maintenance window. In other words, the instances to run commands on when the maintenance window runs. You must specify targets by using the WindowTargetIds parameter. Type: List Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ssm-maintenancewindowtarget.html#cfn-ssm-maintenancewindowtarget-targets ItemType: Targets UpdateType: Mutable .PARAMETER Name The name for the maintenance window target. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ssm-maintenancewindowtarget.html#cfn-ssm-maintenancewindowtarget-name PrimitiveType: String UpdateType: Mutable .PARAMETER DeletionPolicy With the DeletionPolicy attribute you can preserve or (in some cases) backup a resource when its stack is deleted. You specify a DeletionPolicy attribute for each resource that you want to control. If a resource has no DeletionPolicy attribute, AWS CloudFormation deletes the resource by default. To keep a resource when its stack is deleted, specify Retain for that resource. You can use retain for any resource. For example, you can retain a nested stack, S3 bucket, or EC2 instance so that you can continue to use or modify those resources after you delete their stacks. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER UpdateReplacePolicy Use the UpdateReplacePolicy attribute to retain or (in some cases) backup the existing physical instance of a resource when it is replaced during a stack update operation. When you initiate a stack update, AWS CloudFormation updates resources based on differences between what you submit and the stack's current template and parameters. If you update a resource property that requires that the resource be replaced, AWS CloudFormation recreates the resource during the update. Recreating the resource generates a new physical ID. AWS CloudFormation creates the replacement resource first, and then changes references from other dependent resources to point to the replacement resource. By default, AWS CloudFormation then deletes the old resource. Using the UpdateReplacePolicy, you can specify that AWS CloudFormation retain or (in some cases) create a snapshot of the old resource. For resources that support snapshots, such as AWS::EC2::Volume, specify Snapshot to have AWS CloudFormation create a snapshot before deleting the old resource instance. You can apply the UpdateReplacePolicy attribute to any resource. UpdateReplacePolicy is only executed if you update a resource property whose update behavior is specified as Replacement, thereby causing AWS CloudFormation to replace the old resource with a new one with a new physical ID. For example, if you update the Engine property of an AWS::RDS::DBInstance resource type, AWS CloudFormation creates a new resource and replaces the current DB instance resource with the new one. The UpdateReplacePolicy attribute would then dictate whether AWS CloudFormation deleted, retained, or created a snapshot of the old DB instance. The update behavior for each property of a resource is specified in the reference topic for that resource in the AWS Resource and Property Types Reference. For more information on resource update behavior, see Update Behaviors of Stack Resources. The UpdateReplacePolicy attribute applies to stack updates you perform directly, as well as stack updates performed using change sets. Note Resources that are retained continue to exist and continue to incur applicable charges until you delete those resources. Snapshots that are created with this policy continue to exist and continue to incur applicable charges until you delete those snapshots. UpdateReplacePolicy retains the old physical resource or snapshot, but removes it from AWS CloudFormation's scope. UpdateReplacePolicy differs from the DeletionPolicy attribute in that it only applies to resources replaced during stack updates. Use DeletionPolicy for resources deleted when a stack is deleted, or when the resource definition itself is deleted from the template as part of a stack update. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER DependsOn With the DependsOn attribute you can specify that the creation of a specific resource follows another. When you add a DependsOn attribute to a resource, that resource is created only after the creation of the resource specified in the DependsOn attribute. This parameter takes a string or list of strings representing Logical IDs of resources that must be created prior to this resource being created. .PARAMETER Metadata The Metadata attribute enables you to associate structured data with a resource. By adding a Metadata attribute to a resource, you can add data in JSON or YAML to the resource declaration. In addition, you can use intrinsic functions (such as GetAtt and Ref), parameters, and pseudo parameters within the Metadata attribute to add those interpreted values. This will be returned when describing the resource using AWS CLI. .PARAMETER UpdatePolicy Use the UpdatePolicy attribute to specify how AWS CloudFormation handles updates to the AWS::AutoScaling::AutoScalingGroup resource. AWS CloudFormation invokes one of three update policies depending on the type of change you make or whether a scheduled action is associated with the Auto Scaling group. You must use the "Add-UpdatePolicy" function or the [UpdatePolicy] class here. .PARAMETER Condition Logical ID of the condition that this resource needs to be true in order for this resource to be provisioned. .FUNCTIONALITY Vaporshell #> [OutputType([SSMMaintenanceWindowTarget])] [cmdletbinding()] Param( [parameter(Mandatory = $true,Position = 0)] [ValidateLogicalId()] [string] $LogicalId, [parameter(Mandatory = $false)] [object] $OwnerInformation, [parameter(Mandatory = $false)] [object] $Description, [parameter(Mandatory = $true)] [object] $WindowId, [parameter(Mandatory = $true)] [object] $ResourceType, [parameter(Mandatory = $true)] [object] $Targets, [parameter(Mandatory = $false)] [object] $Name, [parameter()] [DeletionPolicy] $DeletionPolicy, [parameter()] [UpdateReplacePolicy] $UpdateReplacePolicy, [parameter(Mandatory = $false)] [string[]] $DependsOn, [parameter(Mandatory = $false)] [VSJson] $Metadata, [parameter(Mandatory = $false)] [UpdatePolicy] $UpdatePolicy, [parameter(Mandatory = $false)] [string] $Condition ) Process { $obj = [SSMMaintenanceWindowTarget]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'New-VSSSMMaintenanceWindowTarget' function New-VSSSMMaintenanceWindowTask { <# .SYNOPSIS Adds an AWS::SSM::MaintenanceWindowTask resource to the template. The AWS::SSM::MaintenanceWindowTask resource defines information about a task for an AWS Systems Manager maintenance window. For more information, see RegisterTaskWithMaintenanceWindow: https://docs.aws.amazon.com/systems-manager/latest/APIReference/API_RegisterTaskWithMaintenanceWindow.html in the *AWS Systems Manager API Reference*. .DESCRIPTION Adds an AWS::SSM::MaintenanceWindowTask resource to the template. The AWS::SSM::MaintenanceWindowTask resource defines information about a task for an AWS Systems Manager maintenance window. For more information, see RegisterTaskWithMaintenanceWindow: https://docs.aws.amazon.com/systems-manager/latest/APIReference/API_RegisterTaskWithMaintenanceWindow.html in the *AWS Systems Manager API Reference*. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ssm-maintenancewindowtask.html .PARAMETER LogicalId The logical ID must be alphanumeric (A-Za-z0-9) and unique within the template. Use the logical name to reference the resource in other parts of the template. For example, if you want to map an Amazon Elastic Block Store volume to an Amazon EC2 instance, you reference the logical IDs to associate the block stores with the instance. .PARAMETER MaxErrors The maximum number of errors allowed before this task stops being scheduled. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ssm-maintenancewindowtask.html#cfn-ssm-maintenancewindowtask-maxerrors PrimitiveType: String UpdateType: Mutable .PARAMETER Description A description of the task. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ssm-maintenancewindowtask.html#cfn-ssm-maintenancewindowtask-description PrimitiveType: String UpdateType: Mutable .PARAMETER ServiceRoleArn The ARN of the IAM service role to use to publish Amazon Simple Notification Service Amazon SNS notifications for maintenance window Run Command tasks. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ssm-maintenancewindowtask.html#cfn-ssm-maintenancewindowtask-servicerolearn PrimitiveType: String UpdateType: Mutable .PARAMETER Priority The priority of the task in the maintenance window. The lower the number, the higher the priority. Tasks that have the same priority are scheduled in parallel. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ssm-maintenancewindowtask.html#cfn-ssm-maintenancewindowtask-priority PrimitiveType: Integer UpdateType: Mutable .PARAMETER MaxConcurrency The maximum number of targets this task can be run for, in parallel. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ssm-maintenancewindowtask.html#cfn-ssm-maintenancewindowtask-maxconcurrency PrimitiveType: String UpdateType: Mutable .PARAMETER Targets The targets, either instances or window target IDs. + Specify instances using Key=InstanceIds,Values=instanceid1,instanceid2 . + Specify window target IDs using Key=WindowTargetIds,Values=window-target-id-1,window-target-id-2. Type: List Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ssm-maintenancewindowtask.html#cfn-ssm-maintenancewindowtask-targets ItemType: Target UpdateType: Mutable .PARAMETER Name The task name. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ssm-maintenancewindowtask.html#cfn-ssm-maintenancewindowtask-name PrimitiveType: String UpdateType: Mutable .PARAMETER TaskArn The resource that the task uses during execution. For RUN_COMMAND and AUTOMATION task types, TaskArn is the SSM document name or Amazon Resource Name ARN. For LAMBDA tasks, TaskArn is the function name or ARN. For STEP_FUNCTIONS tasks, TaskArn is the state machine ARN. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ssm-maintenancewindowtask.html#cfn-ssm-maintenancewindowtask-taskarn PrimitiveType: String UpdateType: Mutable .PARAMETER TaskInvocationParameters The parameters to pass to the task when it runs. Populate only the fields that match the task type. All other fields should be empty. Type: TaskInvocationParameters Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ssm-maintenancewindowtask.html#cfn-ssm-maintenancewindowtask-taskinvocationparameters UpdateType: Mutable .PARAMETER WindowId The ID of the maintenance window where the task is registered. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ssm-maintenancewindowtask.html#cfn-ssm-maintenancewindowtask-windowid PrimitiveType: String UpdateType: Immutable .PARAMETER TaskParameters The parameters to pass to the task when it runs. TaskParameters has been deprecated. To specify parameters to pass to a task when it runs, instead use the Parameters option in the TaskInvocationParameters structure. For information about how Systems Manager handles these options for the supported maintenance window task types, see MaintenanceWindowTaskInvocationParameters: https://docs.aws.amazon.com/systems-manager/latest/APIReference/API_MaintenanceWindowTaskInvocationParameters.html. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ssm-maintenancewindowtask.html#cfn-ssm-maintenancewindowtask-taskparameters PrimitiveType: Json UpdateType: Mutable .PARAMETER TaskType The type of task. Valid values: RUN_COMMAND, AUTOMATION, LAMBDA, STEP_FUNCTIONS. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ssm-maintenancewindowtask.html#cfn-ssm-maintenancewindowtask-tasktype PrimitiveType: String UpdateType: Immutable .PARAMETER LoggingInfo Information about an Amazon S3 bucket to write task-level logs to. LoggingInfo has been deprecated. To specify an S3 bucket to contain logs, instead use the OutputS3BucketName and OutputS3KeyPrefix options in the TaskInvocationParameters structure. For information about how Systems Manager handles these options for the supported maintenance window task types, see AWS Systems Manager MaintenanceWindowTask TaskInvocationParameters: https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ssm-maintenancewindowtask-taskinvocationparameters.html. Type: LoggingInfo Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ssm-maintenancewindowtask.html#cfn-ssm-maintenancewindowtask-logginginfo UpdateType: Mutable .PARAMETER DeletionPolicy With the DeletionPolicy attribute you can preserve or (in some cases) backup a resource when its stack is deleted. You specify a DeletionPolicy attribute for each resource that you want to control. If a resource has no DeletionPolicy attribute, AWS CloudFormation deletes the resource by default. To keep a resource when its stack is deleted, specify Retain for that resource. You can use retain for any resource. For example, you can retain a nested stack, S3 bucket, or EC2 instance so that you can continue to use or modify those resources after you delete their stacks. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER UpdateReplacePolicy Use the UpdateReplacePolicy attribute to retain or (in some cases) backup the existing physical instance of a resource when it is replaced during a stack update operation. When you initiate a stack update, AWS CloudFormation updates resources based on differences between what you submit and the stack's current template and parameters. If you update a resource property that requires that the resource be replaced, AWS CloudFormation recreates the resource during the update. Recreating the resource generates a new physical ID. AWS CloudFormation creates the replacement resource first, and then changes references from other dependent resources to point to the replacement resource. By default, AWS CloudFormation then deletes the old resource. Using the UpdateReplacePolicy, you can specify that AWS CloudFormation retain or (in some cases) create a snapshot of the old resource. For resources that support snapshots, such as AWS::EC2::Volume, specify Snapshot to have AWS CloudFormation create a snapshot before deleting the old resource instance. You can apply the UpdateReplacePolicy attribute to any resource. UpdateReplacePolicy is only executed if you update a resource property whose update behavior is specified as Replacement, thereby causing AWS CloudFormation to replace the old resource with a new one with a new physical ID. For example, if you update the Engine property of an AWS::RDS::DBInstance resource type, AWS CloudFormation creates a new resource and replaces the current DB instance resource with the new one. The UpdateReplacePolicy attribute would then dictate whether AWS CloudFormation deleted, retained, or created a snapshot of the old DB instance. The update behavior for each property of a resource is specified in the reference topic for that resource in the AWS Resource and Property Types Reference. For more information on resource update behavior, see Update Behaviors of Stack Resources. The UpdateReplacePolicy attribute applies to stack updates you perform directly, as well as stack updates performed using change sets. Note Resources that are retained continue to exist and continue to incur applicable charges until you delete those resources. Snapshots that are created with this policy continue to exist and continue to incur applicable charges until you delete those snapshots. UpdateReplacePolicy retains the old physical resource or snapshot, but removes it from AWS CloudFormation's scope. UpdateReplacePolicy differs from the DeletionPolicy attribute in that it only applies to resources replaced during stack updates. Use DeletionPolicy for resources deleted when a stack is deleted, or when the resource definition itself is deleted from the template as part of a stack update. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER DependsOn With the DependsOn attribute you can specify that the creation of a specific resource follows another. When you add a DependsOn attribute to a resource, that resource is created only after the creation of the resource specified in the DependsOn attribute. This parameter takes a string or list of strings representing Logical IDs of resources that must be created prior to this resource being created. .PARAMETER Metadata The Metadata attribute enables you to associate structured data with a resource. By adding a Metadata attribute to a resource, you can add data in JSON or YAML to the resource declaration. In addition, you can use intrinsic functions (such as GetAtt and Ref), parameters, and pseudo parameters within the Metadata attribute to add those interpreted values. This will be returned when describing the resource using AWS CLI. .PARAMETER UpdatePolicy Use the UpdatePolicy attribute to specify how AWS CloudFormation handles updates to the AWS::AutoScaling::AutoScalingGroup resource. AWS CloudFormation invokes one of three update policies depending on the type of change you make or whether a scheduled action is associated with the Auto Scaling group. You must use the "Add-UpdatePolicy" function or the [UpdatePolicy] class here. .PARAMETER Condition Logical ID of the condition that this resource needs to be true in order for this resource to be provisioned. .FUNCTIONALITY Vaporshell #> [OutputType([SSMMaintenanceWindowTask])] [cmdletbinding()] Param( [parameter(Mandatory = $true,Position = 0)] [ValidateLogicalId()] [string] $LogicalId, [parameter(Mandatory = $false)] [object] $MaxErrors, [parameter(Mandatory = $false)] [object] $Description, [parameter(Mandatory = $false)] [object] $ServiceRoleArn, [parameter(Mandatory = $true)] [object] $Priority, [parameter(Mandatory = $false)] [object] $MaxConcurrency, [parameter(Mandatory = $false)] [object] $Targets, [parameter(Mandatory = $false)] [object] $Name, [parameter(Mandatory = $true)] [object] $TaskArn, [parameter(Mandatory = $false)] $TaskInvocationParameters, [parameter(Mandatory = $true)] [object] $WindowId, [parameter(Mandatory = $false)] [VSJson] $TaskParameters, [parameter(Mandatory = $true)] [object] $TaskType, [parameter(Mandatory = $false)] $LoggingInfo, [parameter()] [DeletionPolicy] $DeletionPolicy, [parameter()] [UpdateReplacePolicy] $UpdateReplacePolicy, [parameter(Mandatory = $false)] [string[]] $DependsOn, [parameter(Mandatory = $false)] [VSJson] $Metadata, [parameter(Mandatory = $false)] [UpdatePolicy] $UpdatePolicy, [parameter(Mandatory = $false)] [string] $Condition ) Process { $obj = [SSMMaintenanceWindowTask]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'New-VSSSMMaintenanceWindowTask' function New-VSSSMParameter { <# .SYNOPSIS Adds an AWS::SSM::Parameter resource to the template. The AWS::SSM::Parameter resource creates an SSM parameter in AWS Systems Manager Parameter Store. .DESCRIPTION Adds an AWS::SSM::Parameter resource to the template. The AWS::SSM::Parameter resource creates an SSM parameter in AWS Systems Manager Parameter Store. **Important** To create an SSM parameter, you must have the AWS Identity and Access Management (IAM permissions ssm:PutParameter and ssm:AddTagsToResource. On stack creation, AWS CloudFormation adds the following three tags to the parameter: aws:cloudformation:stack-name, aws:cloudformation:logical-id, and aws:cloudformation:stack-id, in addition to any custom tags you specify. To add, update, or remove tags during stack update, you must have IAM permissions for both ssm:AddTagsToResource and ssm:RemoveTagsFromResource. For more information, see Managing Access Using Policies: https://docs.aws.amazon.com/systems-manager/latest/userguide/security-iam.html#security_iam_access-manage in the *AWS Systems Manager User Guide*. For information about valid values for parameters, see Requirements and Constraints for Parameter Names: https://docs.aws.amazon.com/systems-manager/latest/userguide/sysman-parameter-name-constraints.html in the *AWS Systems Manager User Guide* and PutParameter: https://docs.aws.amazon.com/systems-manager/latest/APIReference/API_PutParameter.html in the *AWS Systems Manager API Reference*. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ssm-parameter.html .PARAMETER LogicalId The logical ID must be alphanumeric (A-Za-z0-9) and unique within the template. Use the logical name to reference the resource in other parts of the template. For example, if you want to map an Amazon Elastic Block Store volume to an Amazon EC2 instance, you reference the logical IDs to associate the block stores with the instance. .PARAMETER Type The type of parameter. AWS CloudFormation doesn't support creating a SecureString parameter type. *Allowed Values*: String | StringList Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ssm-parameter.html#cfn-ssm-parameter-type PrimitiveType: String UpdateType: Mutable .PARAMETER Description Information about the parameter. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ssm-parameter.html#cfn-ssm-parameter-description PrimitiveType: String UpdateType: Mutable .PARAMETER Policies Information about the policies assigned to a parameter. Assigning parameter policies: https://docs.aws.amazon.com/systems-manager/latest/userguide/parameter-store-policies.html in the *AWS Systems Manager User Guide*. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ssm-parameter.html#cfn-ssm-parameter-policies PrimitiveType: String UpdateType: Mutable .PARAMETER AllowedPattern A regular expression used to validate the parameter value. For example, for String types with values restricted to numbers, you can specify the following: AllowedPattern=^d+$ Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ssm-parameter.html#cfn-ssm-parameter-allowedpattern PrimitiveType: String UpdateType: Mutable .PARAMETER Tier The parameter tier. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ssm-parameter.html#cfn-ssm-parameter-tier PrimitiveType: String UpdateType: Mutable .PARAMETER Value The parameter value. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ssm-parameter.html#cfn-ssm-parameter-value PrimitiveType: String UpdateType: Mutable .PARAMETER DataType + Working with Parameter Policies: https://docs.aws.amazon.com/systems-manager/latest/userguide/parameter-store-policies.html Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ssm-parameter.html#cfn-ssm-parameter-datatype PrimitiveType: String UpdateType: Mutable .PARAMETER Tags Optional metadata that you assign to a resource in the form of an arbitrary set of tags key-value pairs. Tags enable you to categorize a resource in different ways, such as by purpose, owner, or environment. For example, you might want to tag a Systems Manager parameter to identify the type of resource to which it applies, the environment, or the type of configuration data referenced by the parameter. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ssm-parameter.html#cfn-ssm-parameter-tags PrimitiveType: Json UpdateType: Mutable .PARAMETER Name The name of the parameter. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ssm-parameter.html#cfn-ssm-parameter-name PrimitiveType: String UpdateType: Immutable .PARAMETER DeletionPolicy With the DeletionPolicy attribute you can preserve or (in some cases) backup a resource when its stack is deleted. You specify a DeletionPolicy attribute for each resource that you want to control. If a resource has no DeletionPolicy attribute, AWS CloudFormation deletes the resource by default. To keep a resource when its stack is deleted, specify Retain for that resource. You can use retain for any resource. For example, you can retain a nested stack, S3 bucket, or EC2 instance so that you can continue to use or modify those resources after you delete their stacks. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER UpdateReplacePolicy Use the UpdateReplacePolicy attribute to retain or (in some cases) backup the existing physical instance of a resource when it is replaced during a stack update operation. When you initiate a stack update, AWS CloudFormation updates resources based on differences between what you submit and the stack's current template and parameters. If you update a resource property that requires that the resource be replaced, AWS CloudFormation recreates the resource during the update. Recreating the resource generates a new physical ID. AWS CloudFormation creates the replacement resource first, and then changes references from other dependent resources to point to the replacement resource. By default, AWS CloudFormation then deletes the old resource. Using the UpdateReplacePolicy, you can specify that AWS CloudFormation retain or (in some cases) create a snapshot of the old resource. For resources that support snapshots, such as AWS::EC2::Volume, specify Snapshot to have AWS CloudFormation create a snapshot before deleting the old resource instance. You can apply the UpdateReplacePolicy attribute to any resource. UpdateReplacePolicy is only executed if you update a resource property whose update behavior is specified as Replacement, thereby causing AWS CloudFormation to replace the old resource with a new one with a new physical ID. For example, if you update the Engine property of an AWS::RDS::DBInstance resource type, AWS CloudFormation creates a new resource and replaces the current DB instance resource with the new one. The UpdateReplacePolicy attribute would then dictate whether AWS CloudFormation deleted, retained, or created a snapshot of the old DB instance. The update behavior for each property of a resource is specified in the reference topic for that resource in the AWS Resource and Property Types Reference. For more information on resource update behavior, see Update Behaviors of Stack Resources. The UpdateReplacePolicy attribute applies to stack updates you perform directly, as well as stack updates performed using change sets. Note Resources that are retained continue to exist and continue to incur applicable charges until you delete those resources. Snapshots that are created with this policy continue to exist and continue to incur applicable charges until you delete those snapshots. UpdateReplacePolicy retains the old physical resource or snapshot, but removes it from AWS CloudFormation's scope. UpdateReplacePolicy differs from the DeletionPolicy attribute in that it only applies to resources replaced during stack updates. Use DeletionPolicy for resources deleted when a stack is deleted, or when the resource definition itself is deleted from the template as part of a stack update. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER DependsOn With the DependsOn attribute you can specify that the creation of a specific resource follows another. When you add a DependsOn attribute to a resource, that resource is created only after the creation of the resource specified in the DependsOn attribute. This parameter takes a string or list of strings representing Logical IDs of resources that must be created prior to this resource being created. .PARAMETER Metadata The Metadata attribute enables you to associate structured data with a resource. By adding a Metadata attribute to a resource, you can add data in JSON or YAML to the resource declaration. In addition, you can use intrinsic functions (such as GetAtt and Ref), parameters, and pseudo parameters within the Metadata attribute to add those interpreted values. This will be returned when describing the resource using AWS CLI. .PARAMETER UpdatePolicy Use the UpdatePolicy attribute to specify how AWS CloudFormation handles updates to the AWS::AutoScaling::AutoScalingGroup resource. AWS CloudFormation invokes one of three update policies depending on the type of change you make or whether a scheduled action is associated with the Auto Scaling group. You must use the "Add-UpdatePolicy" function or the [UpdatePolicy] class here. .PARAMETER Condition Logical ID of the condition that this resource needs to be true in order for this resource to be provisioned. .FUNCTIONALITY Vaporshell #> [OutputType([SSMParameter])] [cmdletbinding()] Param( [parameter(Mandatory = $true,Position = 0)] [ValidateLogicalId()] [string] $LogicalId, [parameter(Mandatory = $true)] [object] $Type, [parameter(Mandatory = $false)] [object] $Description, [parameter(Mandatory = $false)] [object] $Policies, [parameter(Mandatory = $false)] [object] $AllowedPattern, [parameter(Mandatory = $false)] [object] $Tier, [parameter(Mandatory = $true)] [object] $Value, [parameter(Mandatory = $false)] [object] $DataType, [parameter(Mandatory = $false)] [VSJson] $Tags, [parameter(Mandatory = $false)] [object] $Name, [parameter()] [DeletionPolicy] $DeletionPolicy, [parameter()] [UpdateReplacePolicy] $UpdateReplacePolicy, [parameter(Mandatory = $false)] [string[]] $DependsOn, [parameter(Mandatory = $false)] [VSJson] $Metadata, [parameter(Mandatory = $false)] [UpdatePolicy] $UpdatePolicy, [parameter(Mandatory = $false)] [string] $Condition ) Process { $obj = [SSMParameter]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'New-VSSSMParameter' function New-VSSSMPatchBaseline { <# .SYNOPSIS Adds an AWS::SSM::PatchBaseline resource to the template. The AWS::SSM::PatchBaseline resource defines the basic information for an AWS Systems Manager patch baseline. A patch baseline defines which patches are approved for installation on your instances. .DESCRIPTION Adds an AWS::SSM::PatchBaseline resource to the template. The AWS::SSM::PatchBaseline resource defines the basic information for an AWS Systems Manager patch baseline. A patch baseline defines which patches are approved for installation on your instances. For more information, see CreatePatchBaseline: https://docs.aws.amazon.com/systems-manager/latest/APIReference/API_CreatePatchBaseline.html in the *AWS Systems Manager API Reference*. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ssm-patchbaseline.html .PARAMETER LogicalId The logical ID must be alphanumeric (A-Za-z0-9) and unique within the template. Use the logical name to reference the resource in other parts of the template. For example, if you want to map an Amazon Elastic Block Store volume to an Amazon EC2 instance, you reference the logical IDs to associate the block stores with the instance. .PARAMETER OperatingSystem Defines the operating system the patch baseline applies to. The Default value is WINDOWS. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ssm-patchbaseline.html#cfn-ssm-patchbaseline-operatingsystem PrimitiveType: String UpdateType: Immutable .PARAMETER Description A description of the patch baseline. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ssm-patchbaseline.html#cfn-ssm-patchbaseline-description PrimitiveType: String UpdateType: Mutable .PARAMETER ApprovalRules A set of rules used to include patches in the baseline. Type: RuleGroup Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ssm-patchbaseline.html#cfn-ssm-patchbaseline-approvalrules UpdateType: Mutable .PARAMETER Sources Information about the patches to use to update the instances, including target operating systems and source repositories. Applies to Linux instances only. Type: List Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ssm-patchbaseline.html#cfn-ssm-patchbaseline-sources ItemType: PatchSource UpdateType: Mutable .PARAMETER Name The name of the patch baseline. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ssm-patchbaseline.html#cfn-ssm-patchbaseline-name PrimitiveType: String UpdateType: Mutable .PARAMETER RejectedPatches A list of explicitly rejected patches for the baseline. For information about accepted formats for lists of approved patches and rejected patches, see About package name formats for approved and rejected patch lists: https://docs.aws.amazon.com/systems-manager/latest/userguide/patch-manager-approved-rejected-package-name-formats.html in the *AWS Systems Manager User Guide*. PrimitiveItemType: String Type: List Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ssm-patchbaseline.html#cfn-ssm-patchbaseline-rejectedpatches UpdateType: Mutable .PARAMETER ApprovedPatches A list of explicitly approved patches for the baseline. For information about accepted formats for lists of approved patches and rejected patches, see About package name formats for approved and rejected patch lists: https://docs.aws.amazon.com/systems-manager/latest/userguide/patch-manager-approved-rejected-package-name-formats.html in the *AWS Systems Manager User Guide*. PrimitiveItemType: String Type: List Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ssm-patchbaseline.html#cfn-ssm-patchbaseline-approvedpatches UpdateType: Mutable .PARAMETER RejectedPatchesAction The action for Patch Manager to take on patches included in the RejectedPackages list. + **ALLOW_AS_DEPENDENCY**: A package in the Rejected patches list is installed only if it is a dependency of another package. It is considered compliant with the patch baseline, and its status is reported as *InstalledOther*. This is the default action if no option is specified. + **BLOCK**: Packages in the RejectedPatches list, and packages that include them as dependencies, are not installed under any circumstances. If a package was installed before it was added to the Rejected patches list, it is considered non-compliant with the patch baseline, and its status is reported as *InstalledRejected*. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ssm-patchbaseline.html#cfn-ssm-patchbaseline-rejectedpatchesaction PrimitiveType: String UpdateType: Mutable .PARAMETER PatchGroups The name of the patch group that should be registered with the patch baseline. PrimitiveItemType: String Type: List Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ssm-patchbaseline.html#cfn-ssm-patchbaseline-patchgroups UpdateType: Mutable .PARAMETER ApprovedPatchesComplianceLevel Defines the compliance level for approved patches. This means that if an approved patch is reported as missing, this is the severity of the compliance violation. The default value is UNSPECIFIED. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ssm-patchbaseline.html#cfn-ssm-patchbaseline-approvedpatchescompliancelevel PrimitiveType: String UpdateType: Mutable .PARAMETER ApprovedPatchesEnableNonSecurity Indicates whether the list of approved patches includes non-security updates that should be applied to the instances. The default value is 'false'. Applies to Linux instances only. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ssm-patchbaseline.html#cfn-ssm-patchbaseline-approvedpatchesenablenonsecurity PrimitiveType: Boolean UpdateType: Mutable .PARAMETER GlobalFilters A set of global filters used to include patches in the baseline. Type: PatchFilterGroup Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ssm-patchbaseline.html#cfn-ssm-patchbaseline-globalfilters UpdateType: Mutable .PARAMETER Tags Optional metadata that you assign to a resource. Tags enable you to categorize a resource in different ways, such as by purpose, owner, or environment. For example, you might want to tag a patch baseline to identify the severity level of patches it specifies and the operating system family it applies to. Type: List Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ssm-patchbaseline.html#cfn-ssm-patchbaseline-tags ItemType: Tag UpdateType: Mutable .PARAMETER DeletionPolicy With the DeletionPolicy attribute you can preserve or (in some cases) backup a resource when its stack is deleted. You specify a DeletionPolicy attribute for each resource that you want to control. If a resource has no DeletionPolicy attribute, AWS CloudFormation deletes the resource by default. To keep a resource when its stack is deleted, specify Retain for that resource. You can use retain for any resource. For example, you can retain a nested stack, S3 bucket, or EC2 instance so that you can continue to use or modify those resources after you delete their stacks. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER UpdateReplacePolicy Use the UpdateReplacePolicy attribute to retain or (in some cases) backup the existing physical instance of a resource when it is replaced during a stack update operation. When you initiate a stack update, AWS CloudFormation updates resources based on differences between what you submit and the stack's current template and parameters. If you update a resource property that requires that the resource be replaced, AWS CloudFormation recreates the resource during the update. Recreating the resource generates a new physical ID. AWS CloudFormation creates the replacement resource first, and then changes references from other dependent resources to point to the replacement resource. By default, AWS CloudFormation then deletes the old resource. Using the UpdateReplacePolicy, you can specify that AWS CloudFormation retain or (in some cases) create a snapshot of the old resource. For resources that support snapshots, such as AWS::EC2::Volume, specify Snapshot to have AWS CloudFormation create a snapshot before deleting the old resource instance. You can apply the UpdateReplacePolicy attribute to any resource. UpdateReplacePolicy is only executed if you update a resource property whose update behavior is specified as Replacement, thereby causing AWS CloudFormation to replace the old resource with a new one with a new physical ID. For example, if you update the Engine property of an AWS::RDS::DBInstance resource type, AWS CloudFormation creates a new resource and replaces the current DB instance resource with the new one. The UpdateReplacePolicy attribute would then dictate whether AWS CloudFormation deleted, retained, or created a snapshot of the old DB instance. The update behavior for each property of a resource is specified in the reference topic for that resource in the AWS Resource and Property Types Reference. For more information on resource update behavior, see Update Behaviors of Stack Resources. The UpdateReplacePolicy attribute applies to stack updates you perform directly, as well as stack updates performed using change sets. Note Resources that are retained continue to exist and continue to incur applicable charges until you delete those resources. Snapshots that are created with this policy continue to exist and continue to incur applicable charges until you delete those snapshots. UpdateReplacePolicy retains the old physical resource or snapshot, but removes it from AWS CloudFormation's scope. UpdateReplacePolicy differs from the DeletionPolicy attribute in that it only applies to resources replaced during stack updates. Use DeletionPolicy for resources deleted when a stack is deleted, or when the resource definition itself is deleted from the template as part of a stack update. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER DependsOn With the DependsOn attribute you can specify that the creation of a specific resource follows another. When you add a DependsOn attribute to a resource, that resource is created only after the creation of the resource specified in the DependsOn attribute. This parameter takes a string or list of strings representing Logical IDs of resources that must be created prior to this resource being created. .PARAMETER Metadata The Metadata attribute enables you to associate structured data with a resource. By adding a Metadata attribute to a resource, you can add data in JSON or YAML to the resource declaration. In addition, you can use intrinsic functions (such as GetAtt and Ref), parameters, and pseudo parameters within the Metadata attribute to add those interpreted values. This will be returned when describing the resource using AWS CLI. .PARAMETER UpdatePolicy Use the UpdatePolicy attribute to specify how AWS CloudFormation handles updates to the AWS::AutoScaling::AutoScalingGroup resource. AWS CloudFormation invokes one of three update policies depending on the type of change you make or whether a scheduled action is associated with the Auto Scaling group. You must use the "Add-UpdatePolicy" function or the [UpdatePolicy] class here. .PARAMETER Condition Logical ID of the condition that this resource needs to be true in order for this resource to be provisioned. .FUNCTIONALITY Vaporshell #> [OutputType([SSMPatchBaseline])] [cmdletbinding()] Param( [parameter(Mandatory = $true,Position = 0)] [ValidateLogicalId()] [string] $LogicalId, [parameter(Mandatory = $false)] [object] $OperatingSystem, [parameter(Mandatory = $false)] [object] $Description, [parameter(Mandatory = $false)] $ApprovalRules, [parameter(Mandatory = $false)] [object] $Sources, [parameter(Mandatory = $true)] [object] $Name, [parameter(Mandatory = $false)] $RejectedPatches, [parameter(Mandatory = $false)] $ApprovedPatches, [parameter(Mandatory = $false)] [object] $RejectedPatchesAction, [parameter(Mandatory = $false)] $PatchGroups, [parameter(Mandatory = $false)] [object] $ApprovedPatchesComplianceLevel, [parameter(Mandatory = $false)] [object] $ApprovedPatchesEnableNonSecurity, [parameter(Mandatory = $false)] $GlobalFilters, [TransformTag()] [object] [parameter(Mandatory = $false)] $Tags, [parameter()] [DeletionPolicy] $DeletionPolicy, [parameter()] [UpdateReplacePolicy] $UpdateReplacePolicy, [parameter(Mandatory = $false)] [string[]] $DependsOn, [parameter(Mandatory = $false)] [VSJson] $Metadata, [parameter(Mandatory = $false)] [UpdatePolicy] $UpdatePolicy, [parameter(Mandatory = $false)] [string] $Condition ) Process { $obj = [SSMPatchBaseline]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'New-VSSSMPatchBaseline' function New-VSSSMResourceDataSync { <# .SYNOPSIS Adds an AWS::SSM::ResourceDataSync resource to the template. The AWS::SSM::ResourceDataSync resource creates, updates, or deletes a Resource Data Sync for AWS Systems Manager. A resource data sync helps you view data from multiple sources in a single location. Systems Manager offers two types of resource data sync: SyncToDestination and SyncFromSource. .DESCRIPTION Adds an AWS::SSM::ResourceDataSync resource to the template. The AWS::SSM::ResourceDataSync resource creates, updates, or deletes a Resource Data Sync for AWS Systems Manager. A resource data sync helps you view data from multiple sources in a single location. Systems Manager offers two types of resource data sync: SyncToDestination and SyncFromSource. You can configure Systems Manager Inventory to use the SyncToDestination type to synchronize Inventory data from multiple AWS Regions to a single Amazon S3 bucket. You can configure Systems Manager Explorer to use the SyncFromSource type to synchronize operational work items (OpsItems and operational data (OpsData from multiple AWS Regions. This type can synchronize OpsItems and OpsData from multiple AWS accounts and Regions or from an EntireOrganization by using AWS Organizations. A resource data sync is an asynchronous operation that returns immediately. After a successful initial sync is completed, the system continuously syncs data. By default, data is not encrypted in Amazon S3. We strongly recommend that you enable encryption in Amazon S3 to ensure secure data storage. We also recommend that you secure access to the Amazon S3 bucket by creating a restrictive bucket policy. For more information, see Configuring Inventory Collection: https://docs.aws.amazon.com/systems-manager/latest/userguide/sysman-inventory-configuring.html#sysman-inventory-datasync and Setting Up Systems Manager Explorer to Display Data from Multiple Accounts and Regions: https://docs.aws.amazon.com/systems-manager/latest/userguide/Explorer-resource-data-sync.html in the *AWS Systems Manager User Guide*. Important: The following *Syntax* section shows all fields that are supported for a resource data sync. The *Examples* section below shows the recommended way to specify configurations for each sync type. Please see the *Examples* section when you create your resource data sync. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ssm-resourcedatasync.html .PARAMETER LogicalId The logical ID must be alphanumeric (A-Za-z0-9) and unique within the template. Use the logical name to reference the resource in other parts of the template. For example, if you want to map an Amazon Elastic Block Store volume to an Amazon EC2 instance, you reference the logical IDs to associate the block stores with the instance. .PARAMETER S3Destination Configuration information for the target S3 bucket. Type: S3Destination Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ssm-resourcedatasync.html#cfn-ssm-resourcedatasync-s3destination UpdateType: Immutable .PARAMETER KMSKeyArn The ARN of an encryption key for a destination in Amazon S3. You can use a KMS key to encrypt inventory data in Amazon S3. You must specify a key that exist in the same region as the destination Amazon S3 bucket. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ssm-resourcedatasync.html#cfn-ssm-resourcedatasync-kmskeyarn PrimitiveType: String UpdateType: Immutable .PARAMETER SyncSource Information about the source where the data was synchronized. Type: SyncSource Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ssm-resourcedatasync.html#cfn-ssm-resourcedatasync-syncsource UpdateType: Mutable .PARAMETER BucketName The name of the S3 bucket where the aggregated data is stored. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ssm-resourcedatasync.html#cfn-ssm-resourcedatasync-bucketname PrimitiveType: String UpdateType: Immutable .PARAMETER BucketRegion The AWS Region with the S3 bucket targeted by the Resource Data Sync. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ssm-resourcedatasync.html#cfn-ssm-resourcedatasync-bucketregion PrimitiveType: String UpdateType: Immutable .PARAMETER SyncFormat A supported sync format. The following format is currently supported: JsonSerDe Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ssm-resourcedatasync.html#cfn-ssm-resourcedatasync-syncformat PrimitiveType: String UpdateType: Immutable .PARAMETER SyncName A name for the Resource Data Sync. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ssm-resourcedatasync.html#cfn-ssm-resourcedatasync-syncname PrimitiveType: String UpdateType: Immutable .PARAMETER SyncType The type of resource data sync. If SyncType is SyncToDestination, then the resource data sync synchronizes data to an S3 bucket. If the SyncType is SyncFromSource then the resource data sync synchronizes data from AWS Organizations or from multiple AWS Regions. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ssm-resourcedatasync.html#cfn-ssm-resourcedatasync-synctype PrimitiveType: String UpdateType: Immutable .PARAMETER BucketPrefix An Amazon S3 prefix for the bucket. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ssm-resourcedatasync.html#cfn-ssm-resourcedatasync-bucketprefix PrimitiveType: String UpdateType: Immutable .PARAMETER DeletionPolicy With the DeletionPolicy attribute you can preserve or (in some cases) backup a resource when its stack is deleted. You specify a DeletionPolicy attribute for each resource that you want to control. If a resource has no DeletionPolicy attribute, AWS CloudFormation deletes the resource by default. To keep a resource when its stack is deleted, specify Retain for that resource. You can use retain for any resource. For example, you can retain a nested stack, S3 bucket, or EC2 instance so that you can continue to use or modify those resources after you delete their stacks. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER UpdateReplacePolicy Use the UpdateReplacePolicy attribute to retain or (in some cases) backup the existing physical instance of a resource when it is replaced during a stack update operation. When you initiate a stack update, AWS CloudFormation updates resources based on differences between what you submit and the stack's current template and parameters. If you update a resource property that requires that the resource be replaced, AWS CloudFormation recreates the resource during the update. Recreating the resource generates a new physical ID. AWS CloudFormation creates the replacement resource first, and then changes references from other dependent resources to point to the replacement resource. By default, AWS CloudFormation then deletes the old resource. Using the UpdateReplacePolicy, you can specify that AWS CloudFormation retain or (in some cases) create a snapshot of the old resource. For resources that support snapshots, such as AWS::EC2::Volume, specify Snapshot to have AWS CloudFormation create a snapshot before deleting the old resource instance. You can apply the UpdateReplacePolicy attribute to any resource. UpdateReplacePolicy is only executed if you update a resource property whose update behavior is specified as Replacement, thereby causing AWS CloudFormation to replace the old resource with a new one with a new physical ID. For example, if you update the Engine property of an AWS::RDS::DBInstance resource type, AWS CloudFormation creates a new resource and replaces the current DB instance resource with the new one. The UpdateReplacePolicy attribute would then dictate whether AWS CloudFormation deleted, retained, or created a snapshot of the old DB instance. The update behavior for each property of a resource is specified in the reference topic for that resource in the AWS Resource and Property Types Reference. For more information on resource update behavior, see Update Behaviors of Stack Resources. The UpdateReplacePolicy attribute applies to stack updates you perform directly, as well as stack updates performed using change sets. Note Resources that are retained continue to exist and continue to incur applicable charges until you delete those resources. Snapshots that are created with this policy continue to exist and continue to incur applicable charges until you delete those snapshots. UpdateReplacePolicy retains the old physical resource or snapshot, but removes it from AWS CloudFormation's scope. UpdateReplacePolicy differs from the DeletionPolicy attribute in that it only applies to resources replaced during stack updates. Use DeletionPolicy for resources deleted when a stack is deleted, or when the resource definition itself is deleted from the template as part of a stack update. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER DependsOn With the DependsOn attribute you can specify that the creation of a specific resource follows another. When you add a DependsOn attribute to a resource, that resource is created only after the creation of the resource specified in the DependsOn attribute. This parameter takes a string or list of strings representing Logical IDs of resources that must be created prior to this resource being created. .PARAMETER Metadata The Metadata attribute enables you to associate structured data with a resource. By adding a Metadata attribute to a resource, you can add data in JSON or YAML to the resource declaration. In addition, you can use intrinsic functions (such as GetAtt and Ref), parameters, and pseudo parameters within the Metadata attribute to add those interpreted values. This will be returned when describing the resource using AWS CLI. .PARAMETER UpdatePolicy Use the UpdatePolicy attribute to specify how AWS CloudFormation handles updates to the AWS::AutoScaling::AutoScalingGroup resource. AWS CloudFormation invokes one of three update policies depending on the type of change you make or whether a scheduled action is associated with the Auto Scaling group. You must use the "Add-UpdatePolicy" function or the [UpdatePolicy] class here. .PARAMETER Condition Logical ID of the condition that this resource needs to be true in order for this resource to be provisioned. .FUNCTIONALITY Vaporshell #> [OutputType([SSMResourceDataSync])] [cmdletbinding()] Param( [parameter(Mandatory = $true,Position = 0)] [ValidateLogicalId()] [string] $LogicalId, [parameter(Mandatory = $false)] $S3Destination, [parameter(Mandatory = $false)] [object] $KMSKeyArn, [parameter(Mandatory = $false)] $SyncSource, [parameter(Mandatory = $false)] [object] $BucketName, [parameter(Mandatory = $false)] [object] $BucketRegion, [parameter(Mandatory = $false)] [object] $SyncFormat, [parameter(Mandatory = $true)] [object] $SyncName, [parameter(Mandatory = $false)] [object] $SyncType, [parameter(Mandatory = $false)] [object] $BucketPrefix, [parameter()] [DeletionPolicy] $DeletionPolicy, [parameter()] [UpdateReplacePolicy] $UpdateReplacePolicy, [parameter(Mandatory = $false)] [string[]] $DependsOn, [parameter(Mandatory = $false)] [VSJson] $Metadata, [parameter(Mandatory = $false)] [UpdatePolicy] $UpdatePolicy, [parameter(Mandatory = $false)] [string] $Condition ) Process { $obj = [SSMResourceDataSync]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'New-VSSSMResourceDataSync' |