VaporShell.Route53.psm1
|
# PSM1 Contents function Format-Json { [CmdletBinding()] Param ( [Parameter(Mandatory = $true, Position = 0, ValueFromPipeline = $true)] [String] $Json ) Begin { $cleaner = { param([String]$Line) Process{ [Regex]::Replace( $Line, "\\u(?<Value>[a-zA-Z0-9]{4})", { param($m)([char]([int]::Parse( $m.Groups['Value'].Value, [System.Globalization.NumberStyles]::HexNumber ))).ToString() } ) } } } Process { if ($PSVersionTable.PSVersion.Major -lt 6) { try { $indent = 0; $res = $Json -split '\n' | ForEach-Object { if ($_ -match '[\}\]]') { # This line contains ] or }, decrement the indentation level $indent-- } $line = (' ' * $indent * 2) + $_.TrimStart().Replace(': ', ': ') if ($_ -match '[\{\[]') { # This line contains [ or {, increment the indentation level $indent++ } $cleaner.Invoke($line) } $res -join "`n" } catch { ($Json -split '\n' | ForEach-Object {$cleaner.Invoke($_)}) -join "`n" } } else { ($Json -split '\n' | ForEach-Object {$cleaner.Invoke($_)}) -join "`n" } } } function Get-TrueCount { Param ( [parameter(Mandatory = $false,Position = 0,ValueFromPipeline = $true)] $Array ) Process { if ($array) { if ($array.Count) { $count = $array.Count } else { $count = 1 } } else { $count = 0 } } End { return $count } } function New-VSError { <# .SYNOPSIS Error generator function to use in tandem with $PSCmdlet.ThrowTerminatingError() .PARAMETER Result Allows input of an error from AWS SDK, resulting in the Exception message being parsed out. .PARAMETER String Used to create basic String message errors in the same wrapper #> [cmdletbinding(DefaultParameterSetName="Result")] param( [parameter(Position=0,ParameterSetName="Result")] $Result, [parameter(Position=0,ParameterSetName="String")] $String ) switch ($PSCmdlet.ParameterSetName) { Result { $Exception = "$($result.Exception.InnerException.Message)" } String { $Exception = "$String" } } $e = New-Object "System.Exception" $Exception $errorRecord = New-Object 'System.Management.Automation.ErrorRecord' $e, $null, ([System.Management.Automation.ErrorCategory]::InvalidOperation), $null return $errorRecord } function ResolveS3Endpoint { <# .SYNOPSIS Resolves the S3 endpoint most appropriate for each region. #> Param ( [parameter(Mandatory=$true,Position=0)] [ValidateSet("eu-west-2","ap-south-1","us-east-2","sa-east-1","us-west-1","us-west-2","eu-west-1","ap-southeast-2","ca-central-1","ap-northeast-2","us-east-1","eu-central-1","ap-southeast-1","ap-northeast-1")] [String] $Region ) $endpointMap = @{ "us-east-2" = "s3.us-east-2.amazonaws.com" "us-east-1" = "s3.amazonaws.com" "us-west-1" = "s3-us-west-1.amazonaws.com" "us-west-2" = "s3-us-west-2.amazonaws.com" "ca-central-1" = "s3.ca-central-1.amazonaws.com" "ap-south-1" = "s3.ap-south-1.amazonaws.com" "ap-northeast-2" = "s3.ap-northeast-2.amazonaws.com" "ap-southeast-1" = "s3-ap-southeast-1.amazonaws.com" "ap-southeast-2" = "s3-ap-southeast-2.amazonaws.com" "ap-northeast-1" = "s3-ap-northeast-1.amazonaws.com" "eu-central-1" = "s3.eu-central-1.amazonaws.com" "eu-west-1" = "s3-eu-west-1.amazonaws.com" "eu-west-2" = "s3.eu-west-2.amazonaws.com" "sa-east-1" = "s3-sa-east-1.amazonaws.com" } return $endpointMap[$Region] } function Add-VSRoute53HealthCheckAlarmIdentifier { <# .SYNOPSIS Adds an AWS::Route53::HealthCheck.AlarmIdentifier resource property to the template. A complex type that identifies the CloudWatch alarm that you want Amazon Route 53 health checkers to use to determine whether the specified health check is healthy. .DESCRIPTION Adds an AWS::Route53::HealthCheck.AlarmIdentifier resource property to the template. A complex type that identifies the CloudWatch alarm that you want Amazon Route 53 health checkers to use to determine whether the specified health check is healthy. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-route53-healthcheck-alarmidentifier.html .PARAMETER Name The name of the CloudWatch alarm that you want Amazon Route 53 health checkers to use to determine whether this health check is healthy. Route 53 supports CloudWatch alarms with the following features: + Standard-resolution metrics. High-resolution metrics aren't supported. For more information, see High-Resolution Metrics: https://docs.aws.amazon.com/AmazonCloudWatch/latest/DeveloperGuide/publishingMetrics.html#high-resolution-metrics in the *Amazon CloudWatch User Guide*. + Statistics: Average, Minimum, Maximum, Sum, and SampleCount. Extended statistics aren't supported. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-route53-healthcheck-alarmidentifier.html#cfn-route53-healthcheck-alarmidentifier-name PrimitiveType: String UpdateType: Mutable .PARAMETER Region For the CloudWatch alarm that you want Route 53 health checkers to use to determine whether this health check is healthy, the region that the alarm was created in. For the current list of CloudWatch regions, see Amazon CloudWatch: https://docs.aws.amazon.com/general/latest/gr/rande.html#cw_region in the *AWS Service Endpoints* chapter of the *Amazon Web Services General Reference*. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-route53-healthcheck-alarmidentifier.html#cfn-route53-healthcheck-alarmidentifier-region PrimitiveType: String UpdateType: Mutable .FUNCTIONALITY Vaporshell #> [OutputType([Route53HealthCheckAlarmIdentifier])] [cmdletbinding()] Param( [parameter(Mandatory = $true)] [object] $Name, [parameter(Mandatory = $true)] [object] $Region ) Process { $obj = [Route53HealthCheckAlarmIdentifier]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSRoute53HealthCheckAlarmIdentifier' function Add-VSRoute53HealthCheckHealthCheckConfig { <# .SYNOPSIS Adds an AWS::Route53::HealthCheck.HealthCheckConfig resource property to the template. A complex type that contains information about the health check. .DESCRIPTION Adds an AWS::Route53::HealthCheck.HealthCheckConfig resource property to the template. A complex type that contains information about the health check. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-route53-healthcheck-healthcheckconfig.html .PARAMETER AlarmIdentifier A complex type that identifies the CloudWatch alarm that you want Amazon Route 53 health checkers to use to determine whether the specified health check is healthy. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-route53-healthcheck-healthcheckconfig.html#cfn-route53-healthcheck-healthcheckconfig-alarmidentifier Type: AlarmIdentifier UpdateType: Mutable .PARAMETER ChildHealthChecks CALCULATED Health Checks Only A complex type that contains one ChildHealthCheck element for each health check that you want to associate with a CALCULATED health check. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-route53-healthcheck-healthcheckconfig.html#cfn-route53-healthcheck-healthcheckconfig-childhealthchecks DuplicatesAllowed: False PrimitiveItemType: String Type: List UpdateType: Mutable .PARAMETER EnableSNI Specify whether you want Amazon Route 53 to send the value of FullyQualifiedDomainName to the endpoint in the client_hello message during TLS negotiation. This allows the endpoint to respond to HTTPS health check requests with the applicable SSL/TLS certificate. Some endpoints require that HTTPS requests include the host name in the client_hello message. If you don't enable SNI, the status of the health check will be SSL alert handshake_failure. A health check can also have that status for other reasons. If SNI is enabled and you're still getting the error, check the SSL/TLS configuration on your endpoint and confirm that your certificate is valid. The SSL/TLS certificate on your endpoint includes a domain name in the Common Name field and possibly several more in the Subject Alternative Names field. One of the domain names in the certificate should match the value that you specify for FullyQualifiedDomainName. If the endpoint responds to the client_hello message with a certificate that does not include the domain name that you specified in FullyQualifiedDomainName, a health checker will retry the handshake. In the second attempt, the health checker will omit FullyQualifiedDomainName from the client_hello message. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-route53-healthcheck-healthcheckconfig.html#cfn-route53-healthcheck-healthcheckconfig-enablesni PrimitiveType: Boolean UpdateType: Mutable .PARAMETER FailureThreshold The number of consecutive health checks that an endpoint must pass or fail for Amazon Route 53 to change the current status of the endpoint from unhealthy to healthy or vice versa. For more information, see How Amazon Route 53 Determines Whether an Endpoint Is Healthy: https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/dns-failover-determining-health-of-endpoints.html in the *Amazon Route 53 Developer Guide*. If you don't specify a value for FailureThreshold, the default value is three health checks. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-route53-healthcheck-healthcheckconfig.html#cfn-route53-healthcheck-healthcheckconfig-failurethreshold PrimitiveType: Integer UpdateType: Mutable .PARAMETER FullyQualifiedDomainName Amazon Route 53 behavior depends on whether you specify a value for IPAddress. **If you specify a value for** IPAddress: Amazon Route 53 sends health check requests to the specified IPv4 or IPv6 address and passes the value of FullyQualifiedDomainName in the Host header for all health checks except TCP health checks. This is typically the fully qualified DNS name of the endpoint on which you want Route 53 to perform health checks. When Route 53 checks the health of an endpoint, here is how it constructs the Host header: + If you specify a value of 80 for Port and HTTP or HTTP_STR_MATCH for Type, Route 53 passes the value of FullyQualifiedDomainName to the endpoint in the Host header. + If you specify a value of 443 for Port and HTTPS or HTTPS_STR_MATCH for Type, Route 53 passes the value of FullyQualifiedDomainName to the endpoint in the Host header. + If you specify another value for Port and any value except TCP for Type, Route 53 passes FullyQualifiedDomainName:Port to the endpoint in the Host header. If you don't specify a value for FullyQualifiedDomainName, Route 53 substitutes the value of IPAddress in the Host header in each of the preceding cases. **If you don't specify a value for IPAddress **: Route 53 sends a DNS request to the domain that you specify for FullyQualifiedDomainName at the interval that you specify for RequestInterval. Using an IPv4 address that DNS returns, Route 53 then checks the health of the endpoint. If you don't specify a value for IPAddress, Route 53 uses only IPv4 to send health checks to the endpoint. If there's no record with a type of A for the name that you specify for FullyQualifiedDomainName, the health check fails with a "DNS resolution failed" error. If you want to check the health of multiple records that have the same name and type, such as multiple weighted records, and if you choose to specify the endpoint only by FullyQualifiedDomainName, we recommend that you create a separate health check for each endpoint. For example, create a health check for each HTTP server that is serving content for www.example.com. For the value of FullyQualifiedDomainName, specify the domain name of the server such as us-east-2-www.example.com, not the name of the records www.example.com. In this configuration, if you create a health check for which the value of FullyQualifiedDomainName matches the name of the records and you then associate the health check with those records, health check results will be unpredictable. In addition, if the value that you specify for Type is HTTP, HTTPS, HTTP_STR_MATCH, or HTTPS_STR_MATCH, Route 53 passes the value of FullyQualifiedDomainName in the Host header, as it does when you specify a value for IPAddress. If the value of Type is TCP, Route 53 doesn't pass a Host header. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-route53-healthcheck-healthcheckconfig.html#cfn-route53-healthcheck-healthcheckconfig-fullyqualifieddomainname PrimitiveType: String UpdateType: Mutable .PARAMETER HealthThreshold The number of child health checks that are associated with a CALCULATED health check that Amazon Route 53 must consider healthy for the CALCULATED health check to be considered healthy. To specify the child health checks that you want to associate with a CALCULATED health check, use the ChildHealthChecks: https://docs.aws.amazon.com/Route53/latest/APIReference/API_UpdateHealthCheck.html#Route53-UpdateHealthCheck-request-ChildHealthChecks element. Note the following: + If you specify a number greater than the number of child health checks, Route 53 always considers this health check to be unhealthy. + If you specify 0, Route 53 always considers this health check to be healthy. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-route53-healthcheck-healthcheckconfig.html#cfn-route53-healthcheck-healthcheckconfig-healththreshold PrimitiveType: Integer UpdateType: Mutable .PARAMETER IPAddress The IPv4 or IPv6 IP address of the endpoint that you want Amazon Route 53 to perform health checks on. If you don't specify a value for IPAddress, Route 53 sends a DNS request to resolve the domain name that you specify in FullyQualifiedDomainName at the interval that you specify in RequestInterval. Using an IP address returned by DNS, Route 53 then checks the health of the endpoint. Use one of the following formats for the value of IPAddress: + **IPv4 address**: four values between 0 and 255, separated by periods ., for example, 192.0.2.44. + **IPv6 address**: eight groups of four hexadecimal values, separated by colons :, for example, 2001:0db8:85a3:0000:0000:abcd:0001:2345. You can also shorten IPv6 addresses as described in RFC 5952, for example, 2001:db8:85a3::abcd:1:2345. If the endpoint is an EC2 instance, we recommend that you create an Elastic IP address, associate it with your EC2 instance, and specify the Elastic IP address for IPAddress. This ensures that the IP address of your instance will never change. For more information, see FullyQualifiedDomainName: https://docs.aws.amazon.com/Route53/latest/APIReference/API_UpdateHealthCheck.html#Route53-UpdateHealthCheck-request-FullyQualifiedDomainName. Constraints: Route 53 can't check the health of endpoints for which the IP address is in local, private, non-routable, or multicast ranges. For more information about IP addresses for which you can't create health checks, see the following documents: + RFC 5735, Special Use IPv4 Addresses: https://tools.ietf.org/html/rfc5735 + RFC 6598, IANA-Reserved IPv4 Prefix for Shared Address Space: https://tools.ietf.org/html/rfc6598 + RFC 5156, Special-Use IPv6 Addresses: https://tools.ietf.org/html/rfc5156 When the value of Type is CALCULATED or CLOUDWATCH_METRIC, omit IPAddress. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-route53-healthcheck-healthcheckconfig.html#cfn-route53-healthcheck-healthcheckconfig-ipaddress PrimitiveType: String UpdateType: Mutable .PARAMETER InsufficientDataHealthStatus When CloudWatch has insufficient data about the metric to determine the alarm state, the status that you want Amazon Route 53 to assign to the health check: + Healthy: Route 53 considers the health check to be healthy. + Unhealthy: Route 53 considers the health check to be unhealthy. + LastKnownStatus: Route 53 uses the status of the health check from the last time that CloudWatch had sufficient data to determine the alarm state. For new health checks that have no last known status, the default status for the health check is healthy. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-route53-healthcheck-healthcheckconfig.html#cfn-route53-healthcheck-healthcheckconfig-insufficientdatahealthstatus PrimitiveType: String UpdateType: Mutable .PARAMETER Inverted Specify whether you want Amazon Route 53 to invert the status of a health check, for example, to consider a health check unhealthy when it otherwise would be considered healthy. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-route53-healthcheck-healthcheckconfig.html#cfn-route53-healthcheck-healthcheckconfig-inverted PrimitiveType: Boolean UpdateType: Mutable .PARAMETER MeasureLatency Specify whether you want Amazon Route 53 to measure the latency between health checkers in multiple AWS regions and your endpoint, and to display CloudWatch latency graphs on the **Health Checks** page in the Route 53 console. You can't change the value of MeasureLatency after you create a health check. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-route53-healthcheck-healthcheckconfig.html#cfn-route53-healthcheck-healthcheckconfig-measurelatency PrimitiveType: Boolean UpdateType: Immutable .PARAMETER Port The port on the endpoint that you want Amazon Route 53 to perform health checks on. Don't specify a value for Port when you specify a value for Type: https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-route53-healthcheck-healthcheckconfig.html#cfn-route53-healthcheck-healthcheckconfig-type of CLOUDWATCH_METRIC or CALCULATED. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-route53-healthcheck-healthcheckconfig.html#cfn-route53-healthcheck-healthcheckconfig-port PrimitiveType: Integer UpdateType: Mutable .PARAMETER Regions A complex type that contains one Region element for each region from which you want Amazon Route 53 health checkers to check the specified endpoint. If you don't specify any regions, Route 53 health checkers automatically performs checks from all of the regions that are listed under **Valid Values**. If you update a health check to remove a region that has been performing health checks, Route 53 will briefly continue to perform checks from that region to ensure that some health checkers are always checking the endpoint for example, if you replace three regions with four different regions. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-route53-healthcheck-healthcheckconfig.html#cfn-route53-healthcheck-healthcheckconfig-regions DuplicatesAllowed: False PrimitiveItemType: String Type: List UpdateType: Mutable .PARAMETER RequestInterval The number of seconds between the time that Amazon Route 53 gets a response from your endpoint and the time that it sends the next health check request. Each Route 53 health checker makes requests at this interval. You can't change the value of RequestInterval after you create a health check. If you don't specify a value for RequestInterval, the default value is 30 seconds. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-route53-healthcheck-healthcheckconfig.html#cfn-route53-healthcheck-healthcheckconfig-requestinterval PrimitiveType: Integer UpdateType: Immutable .PARAMETER ResourcePath The path, if any, that you want Amazon Route 53 to request when performing health checks. The path can be any value for which your endpoint will return an HTTP status code of 2xx or 3xx when the endpoint is healthy, for example, the file /docs/route53-health-check.html. You can also include query string parameters, for example, /welcome.html?language=jp&login=y. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-route53-healthcheck-healthcheckconfig.html#cfn-route53-healthcheck-healthcheckconfig-resourcepath PrimitiveType: String UpdateType: Mutable .PARAMETER SearchString If the value of Type is HTTP_STR_MATCH or HTTPS_STR_MATCH, the string that you want Amazon Route 53 to search for in the response body from the specified resource. If the string appears in the response body, Route 53 considers the resource healthy. Route 53 considers case when searching for SearchString in the response body. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-route53-healthcheck-healthcheckconfig.html#cfn-route53-healthcheck-healthcheckconfig-searchstring PrimitiveType: String UpdateType: Mutable .PARAMETER Type The type of health check that you want to create, which indicates how Amazon Route 53 determines whether an endpoint is healthy. You can't change the value of Type after you create a health check. You can create the following types of health checks: + **HTTP**: Route 53 tries to establish a TCP connection. If successful, Route 53 submits an HTTP request and waits for an HTTP status code of 200 or greater and less than 400. + **HTTPS**: Route 53 tries to establish a TCP connection. If successful, Route 53 submits an HTTPS request and waits for an HTTP status code of 200 or greater and less than 400. **Important** If you specify HTTPS for the value of Type, the endpoint must support TLS v1.0 or later. + **HTTP_STR_MATCH**: Route 53 tries to establish a TCP connection. If successful, Route 53 submits an HTTP request and searches the first 5,120 bytes of the response body for the string that you specify in SearchString. + **HTTPS_STR_MATCH**: Route 53 tries to establish a TCP connection. If successful, Route 53 submits an HTTPS request and searches the first 5,120 bytes of the response body for the string that you specify in SearchString. + **TCP**: Route 53 tries to establish a TCP connection. + **CLOUDWATCH_METRIC**: The health check is associated with a CloudWatch alarm. If the state of the alarm is OK, the health check is considered healthy. If the state is ALARM, the health check is considered unhealthy. If CloudWatch doesn't have sufficient data to determine whether the state is OK or ALARM, the health check status depends on the setting for InsufficientDataHealthStatus: Healthy, Unhealthy, or LastKnownStatus. + **CALCULATED**: For health checks that monitor the status of other health checks, Route 53 adds up the number of health checks that Route 53 health checkers consider to be healthy and compares that number with the value of HealthThreshold. For more information, see How Route 53 Determines Whether an Endpoint Is Healthy: https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/dns-failover-determining-health-of-endpoints.html in the *Amazon Route 53 Developer Guide*. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-route53-healthcheck-healthcheckconfig.html#cfn-route53-healthcheck-healthcheckconfig-type PrimitiveType: String UpdateType: Immutable .FUNCTIONALITY Vaporshell #> [OutputType([Route53HealthCheckHealthCheckConfig])] [cmdletbinding()] Param( [parameter(Mandatory = $false)] $AlarmIdentifier, [parameter(Mandatory = $false)] $ChildHealthChecks, [parameter(Mandatory = $false)] [object] $EnableSNI, [parameter(Mandatory = $false)] [object] $FailureThreshold, [parameter(Mandatory = $false)] [object] $FullyQualifiedDomainName, [parameter(Mandatory = $false)] [object] $HealthThreshold, [parameter(Mandatory = $false)] [object] $IPAddress, [parameter(Mandatory = $false)] [object] $InsufficientDataHealthStatus, [parameter(Mandatory = $false)] [object] $Inverted, [parameter(Mandatory = $false)] [object] $MeasureLatency, [parameter(Mandatory = $false)] [object] $Port, [parameter(Mandatory = $false)] $Regions, [parameter(Mandatory = $false)] [object] $RequestInterval, [parameter(Mandatory = $false)] [object] $ResourcePath, [parameter(Mandatory = $false)] [object] $SearchString, [parameter(Mandatory = $true)] [object] $Type ) Process { $obj = [Route53HealthCheckHealthCheckConfig]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSRoute53HealthCheckHealthCheckConfig' function Add-VSRoute53HealthCheckHealthCheckTag { <# .SYNOPSIS Adds an AWS::Route53::HealthCheck.HealthCheckTag resource property to the template. The HealthCheckTag property describes one key-value pair that is associated with an AWS::Route53::HealthCheck resource. .DESCRIPTION Adds an AWS::Route53::HealthCheck.HealthCheckTag resource property to the template. The HealthCheckTag property describes one key-value pair that is associated with an AWS::Route53::HealthCheck resource. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-route53-healthcheck-healthchecktag.html .PARAMETER Key The value of Key depends on the operation that you want to perform: + **Add a tag to a health check or hosted zone**: Key is the name that you want to give the new tag. + **Edit a tag**: Key is the name of the tag that you want to change the Value for. + ** Delete a key**: Key is the name of the tag you want to remove. + **Give a name to a health check**: Edit the default Name tag. In the Amazon Route 53 console, the list of your health checks includes a **Name** column that lets you see the name that you've given to each health check. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-route53-healthcheck-healthchecktag.html#cfn-route53-healthcheck-healthchecktag-key UpdateType: Mutable PrimitiveType: String .PARAMETER Value The value of Value depends on the operation that you want to perform: + **Add a tag to a health check or hosted zone**: Value is the value that you want to give the new tag. + **Edit a tag**: Value is the new value that you want to assign the tag. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-route53-healthcheck-healthchecktag.html#cfn-route53-healthcheck-healthchecktag-value UpdateType: Mutable PrimitiveType: String .FUNCTIONALITY Vaporshell #> [OutputType([Route53HealthCheckHealthCheckTag])] [cmdletbinding()] Param( [parameter(Mandatory = $true)] [object] $Key, [parameter(Mandatory = $true)] [object] $Value ) Process { $obj = [Route53HealthCheckHealthCheckTag]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSRoute53HealthCheckHealthCheckTag' function Add-VSRoute53HostedZoneHostedZoneConfig { <# .SYNOPSIS Adds an AWS::Route53::HostedZone.HostedZoneConfig resource property to the template. A complex type that contains an optional comment about your hosted zone. If you don't want to specify a comment, omit both the HostedZoneConfig and Comment elements. .DESCRIPTION Adds an AWS::Route53::HostedZone.HostedZoneConfig resource property to the template. A complex type that contains an optional comment about your hosted zone. If you don't want to specify a comment, omit both the HostedZoneConfig and Comment elements. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-route53-hostedzone-hostedzoneconfig.html .PARAMETER Comment Any comments that you want to include about the hosted zone. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-route53-hostedzone-hostedzoneconfig.html#cfn-route53-hostedzone-hostedzoneconfig-comment UpdateType: Mutable PrimitiveType: String .FUNCTIONALITY Vaporshell #> [OutputType([Route53HostedZoneHostedZoneConfig])] [cmdletbinding()] Param( [parameter(Mandatory = $false)] [object] $Comment ) Process { $obj = [Route53HostedZoneHostedZoneConfig]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSRoute53HostedZoneHostedZoneConfig' function Add-VSRoute53HostedZoneHostedZoneTag { <# .SYNOPSIS Adds an AWS::Route53::HostedZone.HostedZoneTag resource property to the template. .DESCRIPTION Adds an AWS::Route53::HostedZone.HostedZoneTag resource property to the template. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-route53-hostedzone-hostedzonetag.html .PARAMETER Key Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-route53-hostedzone-hostedzonetag.html#cfn-route53-hostedzone-hostedzonetag-key UpdateType: Mutable PrimitiveType: String .PARAMETER Value Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-route53-hostedzone-hostedzonetag.html#cfn-route53-hostedzone-hostedzonetag-value UpdateType: Mutable PrimitiveType: String .FUNCTIONALITY Vaporshell #> [OutputType([Route53HostedZoneHostedZoneTag])] [cmdletbinding()] Param( [parameter(Mandatory = $true)] [object] $Key, [parameter(Mandatory = $true)] [object] $Value ) Process { $obj = [Route53HostedZoneHostedZoneTag]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSRoute53HostedZoneHostedZoneTag' function Add-VSRoute53HostedZoneQueryLoggingConfig { <# .SYNOPSIS Adds an AWS::Route53::HostedZone.QueryLoggingConfig resource property to the template. A complex type that contains information about a configuration for DNS query logging. .DESCRIPTION Adds an AWS::Route53::HostedZone.QueryLoggingConfig resource property to the template. A complex type that contains information about a configuration for DNS query logging. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-route53-hostedzone-queryloggingconfig.html .PARAMETER CloudWatchLogsLogGroupArn The Amazon Resource Name ARN of the CloudWatch Logs log group that Amazon Route 53 is publishing logs to. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-route53-hostedzone-queryloggingconfig.html#cfn-route53-hostedzone-queryloggingconfig-cloudwatchlogsloggrouparn UpdateType: Mutable PrimitiveType: String .FUNCTIONALITY Vaporshell #> [OutputType([Route53HostedZoneQueryLoggingConfig])] [cmdletbinding()] Param( [parameter(Mandatory = $true)] [object] $CloudWatchLogsLogGroupArn ) Process { $obj = [Route53HostedZoneQueryLoggingConfig]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSRoute53HostedZoneQueryLoggingConfig' function Add-VSRoute53HostedZoneVPC { <# .SYNOPSIS Adds an AWS::Route53::HostedZone.VPC resource property to the template. .DESCRIPTION Adds an AWS::Route53::HostedZone.VPC resource property to the template. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-route53-hostedzone-vpc.html .PARAMETER VPCId Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-route53-hostedzone-vpc.html#cfn-route53-hostedzone-vpc-vpcid UpdateType: Mutable PrimitiveType: String .PARAMETER VPCRegion Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-route53-hostedzone-vpc.html#cfn-route53-hostedzone-vpc-vpcregion UpdateType: Mutable PrimitiveType: String .FUNCTIONALITY Vaporshell #> [OutputType([Route53HostedZoneVPC])] [cmdletbinding()] Param( [parameter(Mandatory = $true)] [object] $VPCId, [parameter(Mandatory = $true)] [object] $VPCRegion ) Process { $obj = [Route53HostedZoneVPC]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSRoute53HostedZoneVPC' function Add-VSRoute53RecordSetAliasTarget { <# .SYNOPSIS Adds an AWS::Route53::RecordSet.AliasTarget resource property to the template. *Alias records only:* Information about the AWS resource, such as a CloudFront distribution or an Amazon S3 bucket, that you want to route traffic to. .DESCRIPTION Adds an AWS::Route53::RecordSet.AliasTarget resource property to the template. *Alias records only:* Information about the AWS resource, such as a CloudFront distribution or an Amazon S3 bucket, that you want to route traffic to. When creating records for a private hosted zone, note the following: + Creating geolocation alias and latency alias records in a private hosted zone is allowed but not supported. + For information about creating failover records in a private hosted zone, see Configuring Failover in a Private Hosted Zone: https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/dns-failover-private-hosted-zones.html. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-route53-aliastarget.html .PARAMETER DNSName *Alias records only:* The value that you specify depends on where you want to route queries: Amazon API Gateway custom regional APIs and edge-optimized APIs Specify the applicable domain name for your API. You can get the applicable value using the AWS CLI command get-domain-names: https://docs.aws.amazon.com/cli/latest/reference/apigateway/get-domain-names.html: + For regional APIs, specify the value of regionalDomainName. + For edge-optimized APIs, specify the value of distributionDomainName. This is the name of the associated CloudFront distribution, such as da1b2c3d4e5.cloudfront.net. The name of the record that you're creating must match a custom domain name for your API, such as api.example.com. Amazon Virtual Private Cloud interface VPC endpoint Enter the API endpoint for the interface endpoint, such as vpce-123456789abcdef01-example-us-east-1a.elasticloadbalancing.us-east-1.vpce.amazonaws.com. For edge-optimized APIs, this is the domain name for the corresponding CloudFront distribution. You can get the value of DnsName using the AWS CLI command describe-vpc-endpoints: https://docs.aws.amazon.com/cli/latest/reference/ec2/describe-vpc-endpoints.html. CloudFront distribution Specify the domain name that CloudFront assigned when you created your distribution. Your CloudFront distribution must include an alternate domain name that matches the name of the record. For example, if the name of the record is *acme.example.com*, your CloudFront distribution must include *acme.example.com* as one of the alternate domain names. For more information, see Using Alternate Domain Names CNAMEs: https://docs.aws.amazon.com/AmazonCloudFront/latest/DeveloperGuide/CNAMEs.html in the *Amazon CloudFront Developer Guide*. You can't create a record in a private hosted zone to route traffic to a CloudFront distribution. For failover alias records, you can't specify a CloudFront distribution for both the primary and secondary records. A distribution must include an alternate domain name that matches the name of the record. However, the primary and secondary records have the same name, and you can't include the same alternate domain name in more than one distribution. Elastic Beanstalk environment If the domain name for your Elastic Beanstalk environment includes the region that you deployed the environment in, you can create an alias record that routes traffic to the environment. For example, the domain name my-environment.us-west-2.elasticbeanstalk.com is a regionalized domain name. For environments that were created before early 2016, the domain name doesn't include the region. To route traffic to these environments, you must create a CNAME record instead of an alias record. Note that you can't create a CNAME record for the root domain name. For example, if your domain name is example.com, you can create a record that routes traffic for acme.example.com to your Elastic Beanstalk environment, but you can't create a record that routes traffic for example.com to your Elastic Beanstalk environment. For Elastic Beanstalk environments that have regionalized subdomains, specify the CNAME attribute for the environment. You can use the following methods to get the value of the CNAME attribute: + *AWS Management Console*: For information about how to get the value by using the console, see Using Custom Domains with AWS Elastic Beanstalk: https://docs.aws.amazon.com/elasticbeanstalk/latest/dg/customdomains.html in the *AWS Elastic Beanstalk Developer Guide*. + *Elastic Beanstalk API*: Use the DescribeEnvironments action to get the value of the CNAME attribute. For more information, see DescribeEnvironments: https://docs.aws.amazon.com/elasticbeanstalk/latest/api/API_DescribeEnvironments.html in the *AWS Elastic Beanstalk API Reference*. + *AWS CLI*: Use the describe-environments command to get the value of the CNAME attribute. For more information, see describe-environments: https://docs.aws.amazon.com/cli/latest/reference/elasticbeanstalk/describe-environments.html in the *AWS Command Line Interface Reference*. ELB load balancer Specify the DNS name that is associated with the load balancer. Get the DNS name by using the AWS Management Console, the ELB API, or the AWS CLI. + **AWS Management Console**: Go to the EC2 page, choose **Load Balancers** in the navigation pane, choose the load balancer, choose the **Description** tab, and get the value of the **DNS name** field. If you're routing traffic to a Classic Load Balancer, get the value that begins with **dualstack**. If you're routing traffic to another type of load balancer, get the value that applies to the record type, A or AAAA. + **Elastic Load Balancing API**: Use DescribeLoadBalancers to get the value of DNSName. For more information, see the applicable guide: + Classic Load Balancers: DescribeLoadBalancers: https://docs.aws.amazon.com/elasticloadbalancing/2012-06-01/APIReference/API_DescribeLoadBalancers.html + Application and Network Load Balancers: DescribeLoadBalancers: https://docs.aws.amazon.com/elasticloadbalancing/latest/APIReference/API_DescribeLoadBalancers.html + **CloudFormation Fn::GetAtt intrinsic function**: Use the Fn::GetAtt: https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/intrinsic-function-reference-getatt.html intrinsic function to get the value of DNSName: + Classic Load Balancers: https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ec2-elb.html#aws-properties-ec2-elb-return-values. + Application and Network Load Balancers: https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-elasticloadbalancingv2-loadbalancer.html#aws-resource-elasticloadbalancingv2-loadbalancer-return-values. + **AWS CLI**: Use describe-load-balancers to get the value of DNSName. For more information, see the applicable guide: + Classic Load Balancers: describe-load-balancers: https://docs.aws.amazon.com/cli/latest/reference/elb/describe-load-balancers.html + Application and Network Load Balancers: describe-load-balancers: https://docs.aws.amazon.com/cli/latest/reference/elbv2/describe-load-balancers.html AWS Global Accelerator accelerator Specify the DNS name for your accelerator: + **Global Accelerator API**: To get the DNS name, use DescribeAccelerator: https://docs.aws.amazon.com/global-accelerator/latest/api/API_DescribeAccelerator.html. + **AWS CLI**: To get the DNS name, use describe-accelerator: https://docs.aws.amazon.com/cli/latest/reference/globalaccelerator/describe-accelerator.html. Amazon S3 bucket that is configured as a static website Specify the domain name of the Amazon S3 website endpoint that you created the bucket in, for example, s3-website.us-east-2.amazonaws.com. For more information about valid values, see the table Amazon S3 Website Endpoints: https://docs.aws.amazon.com/general/latest/gr/s3.html#s3_website_region_endpoints in the *Amazon Web Services General Reference*. For more information about using S3 buckets for websites, see Getting Started with Amazon Route 53: https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/getting-started.html in the *Amazon Route 53 Developer Guide.* Another Route 53 record Specify the value of the Name element for a record in the current hosted zone. If you're creating an alias record that has the same name as the hosted zone known as the zone apex, you can't specify the domain name for a record for which the value of Type is CNAME. This is because the alias record must have the same type as the record that you're routing traffic to, and creating a CNAME record for the zone apex isn't supported even for an alias record. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-route53-aliastarget.html#cfn-route53-aliastarget-dnshostname PrimitiveType: String UpdateType: Mutable .PARAMETER EvaluateTargetHealth *Applies only to alias records with any routing policy:* When EvaluateTargetHealth is true, an alias record inherits the health of the referenced AWS resource, such as an ELB load balancer or another record in the hosted zone. Note the following: CloudFront distributions You can't set EvaluateTargetHealth to true when the alias target is a CloudFront distribution. Elastic Beanstalk environments that have regionalized subdomains If you specify an Elastic Beanstalk environment in DNSName and the environment contains an ELB load balancer, Elastic Load Balancing routes queries only to the healthy Amazon EC2 instances that are registered with the load balancer. An environment automatically contains an ELB load balancer if it includes more than one Amazon EC2 instance. If you set EvaluateTargetHealth to true and either no Amazon EC2 instances are healthy or the load balancer itself is unhealthy, Route 53 routes queries to other available resources that are healthy, if any. If the environment contains a single Amazon EC2 instance, there are no special requirements. ELB load balancers Health checking behavior depends on the type of load balancer: + **Classic Load Balancers**: If you specify an ELB Classic Load Balancer in DNSName, Elastic Load Balancing routes queries only to the healthy Amazon EC2 instances that are registered with the load balancer. If you set EvaluateTargetHealth to true and either no EC2 instances are healthy or the load balancer itself is unhealthy, Route 53 routes queries to other resources. + **Application and Network Load Balancers**: If you specify an ELB Application or Network Load Balancer and you set EvaluateTargetHealth to true, Route 53 routes queries to the load balancer based on the health of the target groups that are associated with the load balancer: + For an Application or Network Load Balancer to be considered healthy, every target group that contains targets must contain at least one healthy target. If any target group contains only unhealthy targets, the load balancer is considered unhealthy, and Route 53 routes queries to other resources. + A target group that has no registered targets is considered unhealthy. When you create a load balancer, you configure settings for Elastic Load Balancing health checks; they're not Route 53 health checks, but they perform a similar function. Do not create Route 53 health checks for the EC2 instances that you register with an ELB load balancer. S3 buckets There are no special requirements for setting EvaluateTargetHealth to true when the alias target is an S3 bucket. Other records in the same hosted zone If the AWS resource that you specify in DNSName is a record or a group of records for example, a group of weighted records but is not another alias record, we recommend that you associate a health check with all of the records in the alias target. For more information, see What Happens When You Omit Health Checks?: https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/dns-failover-complex-configs.html#dns-failover-complex-configs-hc-omitting in the *Amazon Route 53 Developer Guide*. For more information and examples, see Amazon Route 53 Health Checks and DNS Failover: https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/dns-failover.html in the *Amazon Route 53 Developer Guide*. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-route53-aliastarget.html#cfn-route53-aliastarget-evaluatetargethealth PrimitiveType: Boolean UpdateType: Mutable .PARAMETER HostedZoneId *Alias resource records sets only*: The value used depends on where you want to route traffic: Amazon API Gateway custom regional APIs and edge-optimized APIs Specify the hosted zone ID for your API. You can get the applicable value using the AWS CLI command get-domain-names: https://docs.aws.amazon.com/cli/latest/reference/apigateway/get-domain-names.html: + For regional APIs, specify the value of regionalHostedZoneId. + For edge-optimized APIs, specify the value of distributionHostedZoneId. Amazon Virtual Private Cloud interface VPC endpoint Specify the hosted zone ID for your interface endpoint. You can get the value of HostedZoneId using the AWS CLI command describe-vpc-endpoints: https://docs.aws.amazon.com/cli/latest/reference/ec2/describe-vpc-endpoints.html. CloudFront distribution Specify Z2FDTNDATAQYW2. This is always the hosted zone ID when you create an alias record that routes traffic to a CloudFront distribution. Alias records for CloudFront can't be created in a private zone. Elastic Beanstalk environment Specify the hosted zone ID for the region that you created the environment in. The environment must have a regionalized subdomain. For a list of regions and the corresponding hosted zone IDs, see AWS Elastic Beanstalk: https://docs.aws.amazon.com/general/latest/gr/rande.html#elasticbeanstalk_region in the "AWS Regions and Endpoints" chapter of the *Amazon Web Services General Reference*. ELB load balancer Specify the value of the hosted zone ID for the load balancer. Use the following methods to get the hosted zone ID: + Service Endpoints: https://docs.aws.amazon.com/general/latest/gr/elb.html table in the "Elastic Load Balancing Endpoints and Quotas" topic in the *Amazon Web Services General Reference*: Use the value that corresponds with the region that you created your load balancer in. Note that there are separate columns for Application and Classic Load Balancers and for Network Load Balancers. + **AWS Management Console**: Go to the Amazon EC2 page, choose **Load Balancers** in the navigation pane, select the load balancer, and get the value of the **Hosted zone** field on the **Description** tab. + **Elastic Load Balancing API**: Use DescribeLoadBalancers to get the applicable value. For more information, see the applicable guide: + Classic Load Balancers: Use DescribeLoadBalancers: https://docs.aws.amazon.com/elasticloadbalancing/2012-06-01/APIReference/API_DescribeLoadBalancers.html to get the value of CanonicalHostedZoneNameId. + Application and Network Load Balancers: Use DescribeLoadBalancers: https://docs.aws.amazon.com/elasticloadbalancing/latest/APIReference/API_DescribeLoadBalancers.html to get the value of CanonicalHostedZoneId. + **CloudFormation Fn::GetAtt intrinsic function**: Use the Fn::GetAtt: https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/intrinsic-function-reference-getatt.html intrinsic function to get the applicable value: + Classic Load Balancers: Get CanonicalHostedZoneNameID: https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ec2-elb.html#aws-properties-ec2-elb-return-values. + Application and Network Load Balancers: Get CanonicalHostedZoneID: https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-elasticloadbalancingv2-loadbalancer.html#aws-resource-elasticloadbalancingv2-loadbalancer-return-values. + **AWS CLI**: Use describe-load-balancers to get the applicable value. For more information, see the applicable guide: + Classic Load Balancers: Use describe-load-balancers: https://docs.aws.amazon.com/cli/latest/reference/elb/describe-load-balancers.html to get the value of CanonicalHostedZoneNameId. + Application and Network Load Balancers: Use describe-load-balancers: https://docs.aws.amazon.com/cli/latest/reference/elbv2/describe-load-balancers.html to get the value of CanonicalHostedZoneId. AWS Global Accelerator accelerator Specify Z2BJ6XQ5FK7U4H. An Amazon S3 bucket configured as a static website Specify the hosted zone ID for the region that you created the bucket in. For more information about valid values, see the table Amazon S3 Website Endpoints: https://docs.aws.amazon.com/general/latest/gr/s3.html#s3_website_region_endpoints in the *Amazon Web Services General Reference*. Another Route 53 record in your hosted zone Specify the hosted zone ID of your hosted zone. An alias record can't reference a record in a different hosted zone. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-route53-aliastarget.html#cfn-route53-aliastarget-hostedzoneid PrimitiveType: String UpdateType: Mutable .FUNCTIONALITY Vaporshell #> [OutputType([Route53RecordSetAliasTarget])] [cmdletbinding()] Param( [parameter(Mandatory = $true)] [object] $DNSName, [parameter(Mandatory = $false)] [object] $EvaluateTargetHealth, [parameter(Mandatory = $true)] [object] $HostedZoneId ) Process { $obj = [Route53RecordSetAliasTarget]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSRoute53RecordSetAliasTarget' function Add-VSRoute53RecordSetGeoLocation { <# .SYNOPSIS Adds an AWS::Route53::RecordSet.GeoLocation resource property to the template. A complex type that contains information about a geographic location. .DESCRIPTION Adds an AWS::Route53::RecordSet.GeoLocation resource property to the template. A complex type that contains information about a geographic location. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-route53-recordset-geolocation.html .PARAMETER ContinentCode For geolocation resource record sets, a two-letter abbreviation that identifies a continent. Route 53 supports the following continent codes: + **AF**: Africa + **AN**: Antarctica + **AS**: Asia + **EU**: Europe + **OC**: Oceania + **NA**: North America + **SA**: South America Constraint: Specifying ContinentCode with either CountryCode or SubdivisionCode returns an InvalidInput error. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-route53-recordset-geolocation.html#cfn-route53-recordset-geolocation-continentcode PrimitiveType: String UpdateType: Mutable .PARAMETER CountryCode For geolocation resource record sets, the two-letter code for a country. Route 53 uses the two-letter country codes that are specified in ISO standard 3166-1 alpha-2: https://en.wikipedia.org/wiki/ISO_3166-1_alpha-2. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-route53-recordset-geolocation.html#cfn-route53-recordset-geolocation-countrycode PrimitiveType: String UpdateType: Mutable .PARAMETER SubdivisionCode For geolocation resource record sets, the two-letter code for a state of the United States. Route 53 doesn't support any other values for SubdivisionCode. For a list of state abbreviations, see Appendix B: Two–Letter State and Possession Abbreviations: https://pe.usps.com/text/pub28/28apb.htm on the United States Postal Service website. If you specify subdivisioncode, you must also specify US for CountryCode. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-route53-recordset-geolocation.html#cfn-route53-recordset-geolocation-subdivisioncode PrimitiveType: String UpdateType: Mutable .FUNCTIONALITY Vaporshell #> [OutputType([Route53RecordSetGeoLocation])] [cmdletbinding()] Param( [parameter(Mandatory = $false)] [object] $ContinentCode, [parameter(Mandatory = $false)] [object] $CountryCode, [parameter(Mandatory = $false)] [object] $SubdivisionCode ) Process { $obj = [Route53RecordSetGeoLocation]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSRoute53RecordSetGeoLocation' function Add-VSRoute53RecordSetGroupAliasTarget { <# .SYNOPSIS Adds an AWS::Route53::RecordSetGroup.AliasTarget resource property to the template. *Alias records only:* Information about the AWS resource, such as a CloudFront distribution or an Amazon S3 bucket, that you want to route traffic to. .DESCRIPTION Adds an AWS::Route53::RecordSetGroup.AliasTarget resource property to the template. *Alias records only:* Information about the AWS resource, such as a CloudFront distribution or an Amazon S3 bucket, that you want to route traffic to. When creating records for a private hosted zone, note the following: + Creating geolocation alias and latency alias records in a private hosted zone is allowed but not supported. + For information about creating failover records in a private hosted zone, see Configuring Failover in a Private Hosted Zone: https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/dns-failover-private-hosted-zones.html. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-route53-aliastarget.html .PARAMETER DNSName *Alias records only:* The value that you specify depends on where you want to route queries: Amazon API Gateway custom regional APIs and edge-optimized APIs Specify the applicable domain name for your API. You can get the applicable value using the AWS CLI command get-domain-names: https://docs.aws.amazon.com/cli/latest/reference/apigateway/get-domain-names.html: + For regional APIs, specify the value of regionalDomainName. + For edge-optimized APIs, specify the value of distributionDomainName. This is the name of the associated CloudFront distribution, such as da1b2c3d4e5.cloudfront.net. The name of the record that you're creating must match a custom domain name for your API, such as api.example.com. Amazon Virtual Private Cloud interface VPC endpoint Enter the API endpoint for the interface endpoint, such as vpce-123456789abcdef01-example-us-east-1a.elasticloadbalancing.us-east-1.vpce.amazonaws.com. For edge-optimized APIs, this is the domain name for the corresponding CloudFront distribution. You can get the value of DnsName using the AWS CLI command describe-vpc-endpoints: https://docs.aws.amazon.com/cli/latest/reference/ec2/describe-vpc-endpoints.html. CloudFront distribution Specify the domain name that CloudFront assigned when you created your distribution. Your CloudFront distribution must include an alternate domain name that matches the name of the record. For example, if the name of the record is *acme.example.com*, your CloudFront distribution must include *acme.example.com* as one of the alternate domain names. For more information, see Using Alternate Domain Names CNAMEs: https://docs.aws.amazon.com/AmazonCloudFront/latest/DeveloperGuide/CNAMEs.html in the *Amazon CloudFront Developer Guide*. You can't create a record in a private hosted zone to route traffic to a CloudFront distribution. For failover alias records, you can't specify a CloudFront distribution for both the primary and secondary records. A distribution must include an alternate domain name that matches the name of the record. However, the primary and secondary records have the same name, and you can't include the same alternate domain name in more than one distribution. Elastic Beanstalk environment If the domain name for your Elastic Beanstalk environment includes the region that you deployed the environment in, you can create an alias record that routes traffic to the environment. For example, the domain name my-environment.us-west-2.elasticbeanstalk.com is a regionalized domain name. For environments that were created before early 2016, the domain name doesn't include the region. To route traffic to these environments, you must create a CNAME record instead of an alias record. Note that you can't create a CNAME record for the root domain name. For example, if your domain name is example.com, you can create a record that routes traffic for acme.example.com to your Elastic Beanstalk environment, but you can't create a record that routes traffic for example.com to your Elastic Beanstalk environment. For Elastic Beanstalk environments that have regionalized subdomains, specify the CNAME attribute for the environment. You can use the following methods to get the value of the CNAME attribute: + *AWS Management Console*: For information about how to get the value by using the console, see Using Custom Domains with AWS Elastic Beanstalk: https://docs.aws.amazon.com/elasticbeanstalk/latest/dg/customdomains.html in the *AWS Elastic Beanstalk Developer Guide*. + *Elastic Beanstalk API*: Use the DescribeEnvironments action to get the value of the CNAME attribute. For more information, see DescribeEnvironments: https://docs.aws.amazon.com/elasticbeanstalk/latest/api/API_DescribeEnvironments.html in the *AWS Elastic Beanstalk API Reference*. + *AWS CLI*: Use the describe-environments command to get the value of the CNAME attribute. For more information, see describe-environments: https://docs.aws.amazon.com/cli/latest/reference/elasticbeanstalk/describe-environments.html in the *AWS Command Line Interface Reference*. ELB load balancer Specify the DNS name that is associated with the load balancer. Get the DNS name by using the AWS Management Console, the ELB API, or the AWS CLI. + **AWS Management Console**: Go to the EC2 page, choose **Load Balancers** in the navigation pane, choose the load balancer, choose the **Description** tab, and get the value of the **DNS name** field. If you're routing traffic to a Classic Load Balancer, get the value that begins with **dualstack**. If you're routing traffic to another type of load balancer, get the value that applies to the record type, A or AAAA. + **Elastic Load Balancing API**: Use DescribeLoadBalancers to get the value of DNSName. For more information, see the applicable guide: + Classic Load Balancers: DescribeLoadBalancers: https://docs.aws.amazon.com/elasticloadbalancing/2012-06-01/APIReference/API_DescribeLoadBalancers.html + Application and Network Load Balancers: DescribeLoadBalancers: https://docs.aws.amazon.com/elasticloadbalancing/latest/APIReference/API_DescribeLoadBalancers.html + **CloudFormation Fn::GetAtt intrinsic function**: Use the Fn::GetAtt: https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/intrinsic-function-reference-getatt.html intrinsic function to get the value of DNSName: + Classic Load Balancers: https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ec2-elb.html#aws-properties-ec2-elb-return-values. + Application and Network Load Balancers: https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-elasticloadbalancingv2-loadbalancer.html#aws-resource-elasticloadbalancingv2-loadbalancer-return-values. + **AWS CLI**: Use describe-load-balancers to get the value of DNSName. For more information, see the applicable guide: + Classic Load Balancers: describe-load-balancers: https://docs.aws.amazon.com/cli/latest/reference/elb/describe-load-balancers.html + Application and Network Load Balancers: describe-load-balancers: https://docs.aws.amazon.com/cli/latest/reference/elbv2/describe-load-balancers.html AWS Global Accelerator accelerator Specify the DNS name for your accelerator: + **Global Accelerator API**: To get the DNS name, use DescribeAccelerator: https://docs.aws.amazon.com/global-accelerator/latest/api/API_DescribeAccelerator.html. + **AWS CLI**: To get the DNS name, use describe-accelerator: https://docs.aws.amazon.com/cli/latest/reference/globalaccelerator/describe-accelerator.html. Amazon S3 bucket that is configured as a static website Specify the domain name of the Amazon S3 website endpoint that you created the bucket in, for example, s3-website.us-east-2.amazonaws.com. For more information about valid values, see the table Amazon S3 Website Endpoints: https://docs.aws.amazon.com/general/latest/gr/s3.html#s3_website_region_endpoints in the *Amazon Web Services General Reference*. For more information about using S3 buckets for websites, see Getting Started with Amazon Route 53: https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/getting-started.html in the *Amazon Route 53 Developer Guide.* Another Route 53 record Specify the value of the Name element for a record in the current hosted zone. If you're creating an alias record that has the same name as the hosted zone known as the zone apex, you can't specify the domain name for a record for which the value of Type is CNAME. This is because the alias record must have the same type as the record that you're routing traffic to, and creating a CNAME record for the zone apex isn't supported even for an alias record. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-route53-aliastarget.html#cfn-route53-aliastarget-dnshostname PrimitiveType: String UpdateType: Mutable .PARAMETER EvaluateTargetHealth *Applies only to alias records with any routing policy:* When EvaluateTargetHealth is true, an alias record inherits the health of the referenced AWS resource, such as an ELB load balancer or another record in the hosted zone. Note the following: CloudFront distributions You can't set EvaluateTargetHealth to true when the alias target is a CloudFront distribution. Elastic Beanstalk environments that have regionalized subdomains If you specify an Elastic Beanstalk environment in DNSName and the environment contains an ELB load balancer, Elastic Load Balancing routes queries only to the healthy Amazon EC2 instances that are registered with the load balancer. An environment automatically contains an ELB load balancer if it includes more than one Amazon EC2 instance. If you set EvaluateTargetHealth to true and either no Amazon EC2 instances are healthy or the load balancer itself is unhealthy, Route 53 routes queries to other available resources that are healthy, if any. If the environment contains a single Amazon EC2 instance, there are no special requirements. ELB load balancers Health checking behavior depends on the type of load balancer: + **Classic Load Balancers**: If you specify an ELB Classic Load Balancer in DNSName, Elastic Load Balancing routes queries only to the healthy Amazon EC2 instances that are registered with the load balancer. If you set EvaluateTargetHealth to true and either no EC2 instances are healthy or the load balancer itself is unhealthy, Route 53 routes queries to other resources. + **Application and Network Load Balancers**: If you specify an ELB Application or Network Load Balancer and you set EvaluateTargetHealth to true, Route 53 routes queries to the load balancer based on the health of the target groups that are associated with the load balancer: + For an Application or Network Load Balancer to be considered healthy, every target group that contains targets must contain at least one healthy target. If any target group contains only unhealthy targets, the load balancer is considered unhealthy, and Route 53 routes queries to other resources. + A target group that has no registered targets is considered unhealthy. When you create a load balancer, you configure settings for Elastic Load Balancing health checks; they're not Route 53 health checks, but they perform a similar function. Do not create Route 53 health checks for the EC2 instances that you register with an ELB load balancer. S3 buckets There are no special requirements for setting EvaluateTargetHealth to true when the alias target is an S3 bucket. Other records in the same hosted zone If the AWS resource that you specify in DNSName is a record or a group of records for example, a group of weighted records but is not another alias record, we recommend that you associate a health check with all of the records in the alias target. For more information, see What Happens When You Omit Health Checks?: https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/dns-failover-complex-configs.html#dns-failover-complex-configs-hc-omitting in the *Amazon Route 53 Developer Guide*. For more information and examples, see Amazon Route 53 Health Checks and DNS Failover: https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/dns-failover.html in the *Amazon Route 53 Developer Guide*. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-route53-aliastarget.html#cfn-route53-aliastarget-evaluatetargethealth PrimitiveType: Boolean UpdateType: Mutable .PARAMETER HostedZoneId *Alias resource records sets only*: The value used depends on where you want to route traffic: Amazon API Gateway custom regional APIs and edge-optimized APIs Specify the hosted zone ID for your API. You can get the applicable value using the AWS CLI command get-domain-names: https://docs.aws.amazon.com/cli/latest/reference/apigateway/get-domain-names.html: + For regional APIs, specify the value of regionalHostedZoneId. + For edge-optimized APIs, specify the value of distributionHostedZoneId. Amazon Virtual Private Cloud interface VPC endpoint Specify the hosted zone ID for your interface endpoint. You can get the value of HostedZoneId using the AWS CLI command describe-vpc-endpoints: https://docs.aws.amazon.com/cli/latest/reference/ec2/describe-vpc-endpoints.html. CloudFront distribution Specify Z2FDTNDATAQYW2. This is always the hosted zone ID when you create an alias record that routes traffic to a CloudFront distribution. Alias records for CloudFront can't be created in a private zone. Elastic Beanstalk environment Specify the hosted zone ID for the region that you created the environment in. The environment must have a regionalized subdomain. For a list of regions and the corresponding hosted zone IDs, see AWS Elastic Beanstalk: https://docs.aws.amazon.com/general/latest/gr/rande.html#elasticbeanstalk_region in the "AWS Regions and Endpoints" chapter of the *Amazon Web Services General Reference*. ELB load balancer Specify the value of the hosted zone ID for the load balancer. Use the following methods to get the hosted zone ID: + Service Endpoints: https://docs.aws.amazon.com/general/latest/gr/elb.html table in the "Elastic Load Balancing Endpoints and Quotas" topic in the *Amazon Web Services General Reference*: Use the value that corresponds with the region that you created your load balancer in. Note that there are separate columns for Application and Classic Load Balancers and for Network Load Balancers. + **AWS Management Console**: Go to the Amazon EC2 page, choose **Load Balancers** in the navigation pane, select the load balancer, and get the value of the **Hosted zone** field on the **Description** tab. + **Elastic Load Balancing API**: Use DescribeLoadBalancers to get the applicable value. For more information, see the applicable guide: + Classic Load Balancers: Use DescribeLoadBalancers: https://docs.aws.amazon.com/elasticloadbalancing/2012-06-01/APIReference/API_DescribeLoadBalancers.html to get the value of CanonicalHostedZoneNameId. + Application and Network Load Balancers: Use DescribeLoadBalancers: https://docs.aws.amazon.com/elasticloadbalancing/latest/APIReference/API_DescribeLoadBalancers.html to get the value of CanonicalHostedZoneId. + **CloudFormation Fn::GetAtt intrinsic function**: Use the Fn::GetAtt: https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/intrinsic-function-reference-getatt.html intrinsic function to get the applicable value: + Classic Load Balancers: Get CanonicalHostedZoneNameID: https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ec2-elb.html#aws-properties-ec2-elb-return-values. + Application and Network Load Balancers: Get CanonicalHostedZoneID: https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-elasticloadbalancingv2-loadbalancer.html#aws-resource-elasticloadbalancingv2-loadbalancer-return-values. + **AWS CLI**: Use describe-load-balancers to get the applicable value. For more information, see the applicable guide: + Classic Load Balancers: Use describe-load-balancers: https://docs.aws.amazon.com/cli/latest/reference/elb/describe-load-balancers.html to get the value of CanonicalHostedZoneNameId. + Application and Network Load Balancers: Use describe-load-balancers: https://docs.aws.amazon.com/cli/latest/reference/elbv2/describe-load-balancers.html to get the value of CanonicalHostedZoneId. AWS Global Accelerator accelerator Specify Z2BJ6XQ5FK7U4H. An Amazon S3 bucket configured as a static website Specify the hosted zone ID for the region that you created the bucket in. For more information about valid values, see the table Amazon S3 Website Endpoints: https://docs.aws.amazon.com/general/latest/gr/s3.html#s3_website_region_endpoints in the *Amazon Web Services General Reference*. Another Route 53 record in your hosted zone Specify the hosted zone ID of your hosted zone. An alias record can't reference a record in a different hosted zone. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-route53-aliastarget.html#cfn-route53-aliastarget-hostedzoneid PrimitiveType: String UpdateType: Mutable .FUNCTIONALITY Vaporshell #> [OutputType([Route53RecordSetGroupAliasTarget])] [cmdletbinding()] Param( [parameter(Mandatory = $true)] [object] $DNSName, [parameter(Mandatory = $false)] [object] $EvaluateTargetHealth, [parameter(Mandatory = $true)] [object] $HostedZoneId ) Process { $obj = [Route53RecordSetGroupAliasTarget]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSRoute53RecordSetGroupAliasTarget' function Add-VSRoute53RecordSetGroupGeoLocation { <# .SYNOPSIS Adds an AWS::Route53::RecordSetGroup.GeoLocation resource property to the template. A complex type that contains information about a geographic location. .DESCRIPTION Adds an AWS::Route53::RecordSetGroup.GeoLocation resource property to the template. A complex type that contains information about a geographic location. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-route53-recordset-geolocation.html .PARAMETER ContinentCode For geolocation resource record sets, a two-letter abbreviation that identifies a continent. Route 53 supports the following continent codes: + **AF**: Africa + **AN**: Antarctica + **AS**: Asia + **EU**: Europe + **OC**: Oceania + **NA**: North America + **SA**: South America Constraint: Specifying ContinentCode with either CountryCode or SubdivisionCode returns an InvalidInput error. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-route53-recordset-geolocation.html#cfn-route53-recordsetgroup-geolocation-continentcode PrimitiveType: String UpdateType: Mutable .PARAMETER CountryCode For geolocation resource record sets, the two-letter code for a country. Route 53 uses the two-letter country codes that are specified in ISO standard 3166-1 alpha-2: https://en.wikipedia.org/wiki/ISO_3166-1_alpha-2. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-route53-recordset-geolocation.html#cfn-route53-recordset-geolocation-countrycode PrimitiveType: String UpdateType: Mutable .PARAMETER SubdivisionCode For geolocation resource record sets, the two-letter code for a state of the United States. Route 53 doesn't support any other values for SubdivisionCode. For a list of state abbreviations, see Appendix B: Two–Letter State and Possession Abbreviations: https://pe.usps.com/text/pub28/28apb.htm on the United States Postal Service website. If you specify subdivisioncode, you must also specify US for CountryCode. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-route53-recordset-geolocation.html#cfn-route53-recordset-geolocation-subdivisioncode PrimitiveType: String UpdateType: Mutable .FUNCTIONALITY Vaporshell #> [OutputType([Route53RecordSetGroupGeoLocation])] [cmdletbinding()] Param( [parameter(Mandatory = $false)] [object] $ContinentCode, [parameter(Mandatory = $false)] [object] $CountryCode, [parameter(Mandatory = $false)] [object] $SubdivisionCode ) Process { $obj = [Route53RecordSetGroupGeoLocation]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSRoute53RecordSetGroupGeoLocation' function Add-VSRoute53RecordSetGroupRecordSet { <# .SYNOPSIS Adds an AWS::Route53::RecordSetGroup.RecordSet resource property to the template. Information about the record that you want to create. .DESCRIPTION Adds an AWS::Route53::RecordSetGroup.RecordSet resource property to the template. Information about the record that you want to create. The AWS::Route53::RecordSet type can be used as a standalone resource or as an embedded property in the AWS::Route53::RecordSetGroup type. Note that some AWS::Route53::RecordSet properties are valid only when used within AWS::Route53::RecordSetGroup. For more information, see ChangeResourceRecordSets: https://docs.aws.amazon.com/Route53/latest/APIReference/API_ChangeResourceRecordSets.html in the *Amazon Route 53 API Reference*. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-route53-recordset.html .PARAMETER AliasTarget *Alias resource record sets only:* Information about the AWS resource, such as a CloudFront distribution or an Amazon S3 bucket, that you want to route traffic to. If you're creating resource records sets for a private hosted zone, note the following: + You can't create an alias resource record set in a private hosted zone to route traffic to a CloudFront distribution. + Creating geolocation alias resource record sets or latency alias resource record sets in a private hosted zone is unsupported. + For information about creating failover resource record sets in a private hosted zone, see Configuring Failover in a Private Hosted Zone: https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/dns-failover-private-hosted-zones.html in the *Amazon Route 53 Developer Guide*. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-route53-recordset.html#cfn-route53-recordset-aliastarget Type: AliasTarget UpdateType: Mutable .PARAMETER Comment *Optional:* Any comments you want to include about a change batch request. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-route53-recordset.html#cfn-route53-recordset-comment PrimitiveType: String UpdateType: Mutable .PARAMETER Failover *Failover resource record sets only:* To configure failover, you add the Failover element to two resource record sets. For one resource record set, you specify PRIMARY as the value for Failover; for the other resource record set, you specify SECONDARY. In addition, you include the HealthCheckId element and specify the health check that you want Amazon Route 53 to perform for each resource record set. Except where noted, the following failover behaviors assume that you have included the HealthCheckId element in both resource record sets: + When the primary resource record set is healthy, Route 53 responds to DNS queries with the applicable value from the primary resource record set regardless of the health of the secondary resource record set. + When the primary resource record set is unhealthy and the secondary resource record set is healthy, Route 53 responds to DNS queries with the applicable value from the secondary resource record set. + When the secondary resource record set is unhealthy, Route 53 responds to DNS queries with the applicable value from the primary resource record set regardless of the health of the primary resource record set. + If you omit the HealthCheckId element for the secondary resource record set, and if the primary resource record set is unhealthy, Route 53 always responds to DNS queries with the applicable value from the secondary resource record set. This is true regardless of the health of the associated endpoint. You can't create non-failover resource record sets that have the same values for the Name and Type elements as failover resource record sets. For failover alias resource record sets, you must also include the EvaluateTargetHealth element and set the value to true. For more information about configuring failover for Route 53, see the following topics in the *Amazon Route 53 Developer Guide*: + Route 53 Health Checks and DNS Failover: https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/dns-failover.html + Configuring Failover in a Private Hosted Zone: https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/dns-failover-private-hosted-zones.html Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-route53-recordset.html#cfn-route53-recordset-failover PrimitiveType: String UpdateType: Mutable .PARAMETER GeoLocation *Geolocation resource record sets only:* A complex type that lets you control how Amazon Route 53 responds to DNS queries based on the geographic origin of the query. For example, if you want all queries from Africa to be routed to a web server with an IP address of 192.0.2.111, create a resource record set with a Type of A and a ContinentCode of AF. Although creating geolocation and geolocation alias resource record sets in a private hosted zone is allowed, it's not supported. If you create separate resource record sets for overlapping geographic regions for example, one resource record set for a continent and one for a country on the same continent, priority goes to the smallest geographic region. This allows you to route most queries for a continent to one resource and to route queries for a country on that continent to a different resource. You can't create two geolocation resource record sets that specify the same geographic location. The value * in the CountryCode element matches all geographic locations that aren't specified in other geolocation resource record sets that have the same values for the Name and Type elements. Geolocation works by mapping IP addresses to locations. However, some IP addresses aren't mapped to geographic locations, so even if you create geolocation resource record sets that cover all seven continents, Route 53 will receive some DNS queries from locations that it can't identify. We recommend that you create a resource record set for which the value of CountryCode is *. Two groups of queries are routed to the resource that you specify in this record: queries that come from locations for which you haven't created geolocation resource record sets and queries from IP addresses that aren't mapped to a location. If you don't create a * resource record set, Route 53 returns a "no answer" response for queries from those locations. You can't create non-geolocation resource record sets that have the same values for the Name and Type elements as geolocation resource record sets. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-route53-recordset.html#cfn-route53-recordset-geolocation Type: GeoLocation UpdateType: Mutable .PARAMETER HealthCheckId If you want Amazon Route 53 to return this resource record set in response to a DNS query only when the status of a health check is healthy, include the HealthCheckId element and specify the ID of the applicable health check. Route 53 determines whether a resource record set is healthy based on one of the following: + By periodically sending a request to the endpoint that is specified in the health check + By aggregating the status of a specified group of health checks calculated health checks + By determining the current state of a CloudWatch alarm CloudWatch metric health checks Route 53 doesn't check the health of the endpoint that is specified in the resource record set, for example, the endpoint specified by the IP address in the Value element. When you add a HealthCheckId element to a resource record set, Route 53 checks the health of the endpoint that you specified in the health check. For more information, see the following topics in the *Amazon Route 53 Developer Guide*: + How Amazon Route 53 Determines Whether an Endpoint Is Healthy: https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/dns-failover-determining-health-of-endpoints.html + Route 53 Health Checks and DNS Failover: https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/dns-failover.html + Configuring Failover in a Private Hosted Zone: https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/dns-failover-private-hosted-zones.html **When to Specify HealthCheckId** Specifying a value for HealthCheckId is useful only when Route 53 is choosing between two or more resource record sets to respond to a DNS query, and you want Route 53 to base the choice in part on the status of a health check. Configuring health checks makes sense only in the following configurations: + **Non-alias resource record sets**: You're checking the health of a group of non-alias resource record sets that have the same routing policy, name, and type such as multiple weighted records named www.example.com with a type of A and you specify health check IDs for all the resource record sets. If the health check status for a resource record set is healthy, Route 53 includes the record among the records that it responds to DNS queries with. If the health check status for a resource record set is unhealthy, Route 53 stops responding to DNS queries using the value for that resource record set. If the health check status for all resource record sets in the group is unhealthy, Route 53 considers all resource record sets in the group healthy and responds to DNS queries accordingly. + **Alias resource record sets**: You specify the following settings: + You set EvaluateTargetHealth to true for an alias resource record set in a group of resource record sets that have the same routing policy, name, and type such as multiple weighted records named www.example.com with a type of A. + You configure the alias resource record set to route traffic to a non-alias resource record set in the same hosted zone. + You specify a health check ID for the non-alias resource record set. If the health check status is healthy, Route 53 considers the alias resource record set to be healthy and includes the alias record among the records that it responds to DNS queries with. If the health check status is unhealthy, Route 53 stops responding to DNS queries using the alias resource record set. **Note** The alias resource record set can also route traffic to a *group* of non-alias resource record sets that have the same routing policy, name, and type. In that configuration, associate health checks with all of the resource record sets in the group of non-alias resource record sets. **Geolocation Routing** For geolocation resource record sets, if an endpoint is unhealthy, Route 53 looks for a resource record set for the larger, associated geographic region. For example, suppose you have resource record sets for a state in the United States, for the entire United States, for North America, and a resource record set that has * for CountryCode is *, which applies to all locations. If the endpoint for the state resource record set is unhealthy, Route 53 checks for healthy resource record sets in the following order until it finds a resource record set for which the endpoint is healthy: + The United States + North America + The default resource record set **Specifying the Health Check Endpoint by Domain Name** If your health checks specify the endpoint only by domain name, we recommend that you create a separate health check for each endpoint. For example, create a health check for each HTTP server that is serving content for www.example.com. For the value of FullyQualifiedDomainName, specify the domain name of the server such as us-east-2-www.example.com, not the name of the resource record sets www.example.com. Health check results will be unpredictable if you do the following: + Create a health check that has the same value for FullyQualifiedDomainName as the name of a resource record set. + Associate that health check with the resource record set. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-route53-recordset.html#cfn-route53-recordset-healthcheckid PrimitiveType: String UpdateType: Mutable .PARAMETER HostedZoneId The ID of the hosted zone that you want to create records in. Specify either HostedZoneName or HostedZoneId, but not both. If you have multiple hosted zones with the same domain name, you must specify the hosted zone using HostedZoneId. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-route53-recordset.html#cfn-route53-recordset-hostedzoneid PrimitiveType: String UpdateType: Mutable .PARAMETER HostedZoneName The name of the hosted zone that you want to create records in. When you create a stack using an AWS::Route53::RecordSet that specifies HostedZoneName, AWS CloudFormation attempts to find a hosted zone whose name matches the HostedZoneName. If AWS CloudFormation cannot find a hosted zone with a matching domain name, or if there is more than one hosted zone with the specified domain name, AWS CloudFormation will not create the stack. Specify either HostedZoneName or HostedZoneId, but not both. If you have multiple hosted zones with the same domain name, you must specify the hosted zone using HostedZoneId. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-route53-recordset.html#cfn-route53-recordset-hostedzonename PrimitiveType: String UpdateType: Mutable .PARAMETER MultiValueAnswer *Multivalue answer resource record sets only*: To route traffic approximately randomly to multiple resources, such as web servers, create one multivalue answer record for each resource and specify true for MultiValueAnswer. Note the following: + If you associate a health check with a multivalue answer resource record set, Amazon Route 53 responds to DNS queries with the corresponding IP address only when the health check is healthy. + If you don't associate a health check with a multivalue answer record, Route 53 always considers the record to be healthy. + Route 53 responds to DNS queries with up to eight healthy records; if you have eight or fewer healthy records, Route 53 responds to all DNS queries with all the healthy records. + If you have more than eight healthy records, Route 53 responds to different DNS resolvers with different combinations of healthy records. + When all records are unhealthy, Route 53 responds to DNS queries with up to eight unhealthy records. + If a resource becomes unavailable after a resolver caches a response, client software typically tries another of the IP addresses in the response. You can't create multivalue answer alias records. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-route53-recordset.html#cfn-route53-recordset-multivalueanswer PrimitiveType: Boolean UpdateType: Mutable .PARAMETER Name For ChangeResourceRecordSets requests, the name of the record that you want to create, update, or delete. For ListResourceRecordSets responses, the name of a record in the specified hosted zone. **ChangeResourceRecordSets Only** Enter a fully qualified domain name, for example, www.example.com. You can optionally include a trailing dot. If you omit the trailing dot, Amazon Route 53 assumes that the domain name that you specify is fully qualified. This means that Route 53 treats www.example.com without a trailing dot and www.example.com. with a trailing dot as identical. For information about how to specify characters other than a-z, 0-9, and - hyphen and how to specify internationalized domain names, see DNS Domain Name Format: https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/DomainNameFormat.html in the *Amazon Route 53 Developer Guide*. You can use the asterisk * wildcard to replace the leftmost label in a domain name, for example, *.example.com. Note the following: + The * must replace the entire label. For example, you can't specify *prod.example.com or prod*.example.com. + The * can't replace any of the middle labels, for example, marketing.*.example.com. + If you include * in any position other than the leftmost label in a domain name, DNS treats it as an * character ASCII 42, not as a wildcard. **Important** You can't use the * wildcard for resource records sets that have a type of NS. You can use the * wildcard as the leftmost label in a domain name, for example, *.example.com. You can't use an * for one of the middle labels, for example, marketing.*.example.com. In addition, the * must replace the entire label; for example, you can't specify prod*.example.com. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-route53-recordset.html#cfn-route53-recordset-name PrimitiveType: String UpdateType: Mutable .PARAMETER Region *Latency-based resource record sets only:* The Amazon EC2 Region where you created the resource that this resource record set refers to. The resource typically is an AWS resource, such as an EC2 instance or an ELB load balancer, and is referred to by an IP address or a DNS domain name, depending on the record type. Although creating latency and latency alias resource record sets in a private hosted zone is allowed, it's not supported. When Amazon Route 53 receives a DNS query for a domain name and type for which you have created latency resource record sets, Route 53 selects the latency resource record set that has the lowest latency between the end user and the associated Amazon EC2 Region. Route 53 then returns the value that is associated with the selected resource record set. Note the following: + You can only specify one ResourceRecord per latency resource record set. + You can only create one latency resource record set for each Amazon EC2 Region. + You aren't required to create latency resource record sets for all Amazon EC2 Regions. Route 53 will choose the region with the best latency from among the regions that you create latency resource record sets for. + You can't create non-latency resource record sets that have the same values for the Name and Type elements as latency resource record sets. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-route53-recordset.html#cfn-route53-recordset-region PrimitiveType: String UpdateType: Mutable .PARAMETER ResourceRecords One or more values that correspond with the value that you specified for the Type property. For example, if you specified A for Type, you specify one or more IP addresses in IPv4 format for ResourceRecords. For information about the format of values for each record type, see Supported DNS Resource Record Types: https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/ResourceRecordTypes.html in the *Amazon Route 53 Developer Guide*. Note the following: + You can specify more than one value for all record types except CNAME and SOA. + The maximum length of a value is 4000 characters. + If you're creating an alias record, omit ResourceRecords. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-route53-recordset.html#cfn-route53-recordset-resourcerecords DuplicatesAllowed: False PrimitiveItemType: String Type: List UpdateType: Mutable .PARAMETER SetIdentifier *Resource record sets that have a routing policy other than simple:* An identifier that differentiates among multiple resource record sets that have the same combination of name and type, such as multiple weighted resource record sets named acme.example.com that have a type of A. In a group of resource record sets that have the same name and type, the value of SetIdentifier must be unique for each resource record set. For information about routing policies, see Choosing a Routing Policy: https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/routing-policy.html in the *Amazon Route 53 Developer Guide*. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-route53-recordset.html#cfn-route53-recordset-setidentifier PrimitiveType: String UpdateType: Mutable .PARAMETER TTL The resource record cache time to live TTL, in seconds. Note the following: + If you're creating or updating an alias resource record set, omit TTL. Amazon Route 53 uses the value of TTL for the alias target. + If you're associating this resource record set with a health check if you're adding a HealthCheckId element, we recommend that you specify a TTL of 60 seconds or less so clients respond quickly to changes in health status. + All of the resource record sets in a group of weighted resource record sets must have the same value for TTL. + If a group of weighted resource record sets includes one or more weighted alias resource record sets for which the alias target is an ELB load balancer, we recommend that you specify a TTL of 60 seconds for all of the non-alias weighted resource record sets that have the same name and type. Values other than 60 seconds the TTL for load balancers will change the effect of the values that you specify for Weight. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-route53-recordset.html#cfn-route53-recordset-ttl PrimitiveType: String UpdateType: Mutable .PARAMETER Type The DNS record type. For information about different record types and how data is encoded for them, see Supported DNS Resource Record Types: https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/ResourceRecordTypes.html in the *Amazon Route 53 Developer Guide*. Valid values for basic resource record sets: A | AAAA | CAA | CNAME | MX | NAPTR | NS | PTR | SOA | SPF | SRV | TXT Values for weighted, latency, geolocation, and failover resource record sets: A | AAAA | CAA | CNAME | MX | NAPTR | PTR | SPF | SRV | TXT. When creating a group of weighted, latency, geolocation, or failover resource record sets, specify the same value for all of the resource record sets in the group. Valid values for multivalue answer resource record sets: A | AAAA | MX | NAPTR | PTR | SPF | SRV | TXT SPF records were formerly used to verify the identity of the sender of email messages. However, we no longer recommend that you create resource record sets for which the value of Type is SPF. RFC 7208, *Sender Policy Framework SPF for Authorizing Use of Domains in Email, Version 1*, has been updated to say, "...I]ts existence and mechanism defined in RFC4408] have led to some interoperability issues. Accordingly, its use is no longer appropriate for SPF version 1; implementations are not to use it." In RFC 7208, see section 14.1, The SPF DNS Record Type: http://tools.ietf.org/html/rfc7208#section-14.1. Values for alias resource record sets: + **Amazon API Gateway custom regional APIs and edge-optimized APIs:** A + **CloudFront distributions:** A If IPv6 is enabled for the distribution, create two resource record sets to route traffic to your distribution, one with a value of A and one with a value of AAAA. + **Amazon API Gateway environment that has a regionalized subdomain**: A + **ELB load balancers:** A | AAAA + **Amazon S3 buckets:** A + **Amazon Virtual Private Cloud interface VPC endpoints** A + **Another resource record set in this hosted zone:** Specify the type of the resource record set that you're creating the alias for. All values are supported except NS and SOA. **Note** If you're creating an alias record that has the same name as the hosted zone known as the zone apex, you can't route traffic to a record for which the value of Type is CNAME. This is because the alias record must have the same type as the record you're routing traffic to, and creating a CNAME record for the zone apex isn't supported even for an alias record. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-route53-recordset.html#cfn-route53-recordset-type PrimitiveType: String UpdateType: Mutable .PARAMETER Weight *Weighted resource record sets only:* Among resource record sets that have the same combination of DNS name and type, a value that determines the proportion of DNS queries that Amazon Route 53 responds to using the current resource record set. Route 53 calculates the sum of the weights for the resource record sets that have the same combination of DNS name and type. Route 53 then responds to queries based on the ratio of a resource's weight to the total. Note the following: + You must specify a value for the Weight element for every weighted resource record set. + You can only specify one ResourceRecord per weighted resource record set. + You can't create latency, failover, or geolocation resource record sets that have the same values for the Name and Type elements as weighted resource record sets. + You can create a maximum of 100 weighted resource record sets that have the same values for the Name and Type elements. + For weighted but not weighted alias resource record sets, if you set Weight to 0 for a resource record set, Route 53 never responds to queries with the applicable value for that resource record set. However, if you set Weight to 0 for all resource record sets that have the same combination of DNS name and type, traffic is routed to all resources with equal probability. The effect of setting Weight to 0 is different when you associate health checks with weighted resource record sets. For more information, see Options for Configuring Route 53 Active-Active and Active-Passive Failover: https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/dns-failover-configuring-options.html in the *Amazon Route 53 Developer Guide*. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-route53-recordset.html#cfn-route53-recordset-weight PrimitiveType: Integer UpdateType: Mutable .FUNCTIONALITY Vaporshell #> [OutputType([Route53RecordSetGroupRecordSet])] [cmdletbinding()] Param( [parameter(Mandatory = $false)] $AliasTarget, [parameter(Mandatory = $false)] [object] $Comment, [parameter(Mandatory = $false)] [object] $Failover, [parameter(Mandatory = $false)] $GeoLocation, [parameter(Mandatory = $false)] [object] $HealthCheckId, [parameter(Mandatory = $false)] [object] $HostedZoneId, [parameter(Mandatory = $false)] [object] $HostedZoneName, [parameter(Mandatory = $false)] [object] $MultiValueAnswer, [parameter(Mandatory = $true)] [object] $Name, [parameter(Mandatory = $false)] [object] $Region, [parameter(Mandatory = $false)] $ResourceRecords, [parameter(Mandatory = $false)] [object] $SetIdentifier, [parameter(Mandatory = $false)] [object] $TTL, [parameter(Mandatory = $true)] [object] $Type, [parameter(Mandatory = $false)] [object] $Weight ) Process { $obj = [Route53RecordSetGroupRecordSet]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSRoute53RecordSetGroupRecordSet' function New-VSRoute53DNSSEC { <# .SYNOPSIS Adds an AWS::Route53::DNSSEC resource to the template. .DESCRIPTION Adds an AWS::Route53::DNSSEC resource to the template. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-route53-dnssec.html .PARAMETER LogicalId The logical ID must be alphanumeric (A-Za-z0-9) and unique within the template. Use the logical name to reference the resource in other parts of the template. For example, if you want to map an Amazon Elastic Block Store volume to an Amazon EC2 instance, you reference the logical IDs to associate the block stores with the instance. .PARAMETER HostedZoneId Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-route53-dnssec.html#cfn-route53-dnssec-hostedzoneid UpdateType: Immutable PrimitiveType: String .PARAMETER DeletionPolicy With the DeletionPolicy attribute you can preserve or (in some cases) backup a resource when its stack is deleted. You specify a DeletionPolicy attribute for each resource that you want to control. If a resource has no DeletionPolicy attribute, AWS CloudFormation deletes the resource by default. To keep a resource when its stack is deleted, specify Retain for that resource. You can use retain for any resource. For example, you can retain a nested stack, S3 bucket, or EC2 instance so that you can continue to use or modify those resources after you delete their stacks. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER UpdateReplacePolicy Use the UpdateReplacePolicy attribute to retain or (in some cases) backup the existing physical instance of a resource when it is replaced during a stack update operation. When you initiate a stack update, AWS CloudFormation updates resources based on differences between what you submit and the stack's current template and parameters. If you update a resource property that requires that the resource be replaced, AWS CloudFormation recreates the resource during the update. Recreating the resource generates a new physical ID. AWS CloudFormation creates the replacement resource first, and then changes references from other dependent resources to point to the replacement resource. By default, AWS CloudFormation then deletes the old resource. Using the UpdateReplacePolicy, you can specify that AWS CloudFormation retain or (in some cases) create a snapshot of the old resource. For resources that support snapshots, such as AWS::EC2::Volume, specify Snapshot to have AWS CloudFormation create a snapshot before deleting the old resource instance. You can apply the UpdateReplacePolicy attribute to any resource. UpdateReplacePolicy is only executed if you update a resource property whose update behavior is specified as Replacement, thereby causing AWS CloudFormation to replace the old resource with a new one with a new physical ID. For example, if you update the Engine property of an AWS::RDS::DBInstance resource type, AWS CloudFormation creates a new resource and replaces the current DB instance resource with the new one. The UpdateReplacePolicy attribute would then dictate whether AWS CloudFormation deleted, retained, or created a snapshot of the old DB instance. The update behavior for each property of a resource is specified in the reference topic for that resource in the AWS Resource and Property Types Reference. For more information on resource update behavior, see Update Behaviors of Stack Resources. The UpdateReplacePolicy attribute applies to stack updates you perform directly, as well as stack updates performed using change sets. Note Resources that are retained continue to exist and continue to incur applicable charges until you delete those resources. Snapshots that are created with this policy continue to exist and continue to incur applicable charges until you delete those snapshots. UpdateReplacePolicy retains the old physical resource or snapshot, but removes it from AWS CloudFormation's scope. UpdateReplacePolicy differs from the DeletionPolicy attribute in that it only applies to resources replaced during stack updates. Use DeletionPolicy for resources deleted when a stack is deleted, or when the resource definition itself is deleted from the template as part of a stack update. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER DependsOn With the DependsOn attribute you can specify that the creation of a specific resource follows another. When you add a DependsOn attribute to a resource, that resource is created only after the creation of the resource specified in the DependsOn attribute. This parameter takes a string or list of strings representing Logical IDs of resources that must be created prior to this resource being created. .PARAMETER Metadata The Metadata attribute enables you to associate structured data with a resource. By adding a Metadata attribute to a resource, you can add data in JSON or YAML to the resource declaration. In addition, you can use intrinsic functions (such as GetAtt and Ref), parameters, and pseudo parameters within the Metadata attribute to add those interpreted values. This will be returned when describing the resource using AWS CLI. .PARAMETER UpdatePolicy Use the UpdatePolicy attribute to specify how AWS CloudFormation handles updates to the AWS::AutoScaling::AutoScalingGroup resource. AWS CloudFormation invokes one of three update policies depending on the type of change you make or whether a scheduled action is associated with the Auto Scaling group. You must use the "Add-UpdatePolicy" function or the [UpdatePolicy] class here. .PARAMETER Condition Logical ID of the condition that this resource needs to be true in order for this resource to be provisioned. .FUNCTIONALITY Vaporshell #> [OutputType([Route53DNSSEC])] [cmdletbinding()] Param( [parameter(Mandatory = $true,Position = 0)] [ValidateLogicalId()] [string] $LogicalId, [parameter(Mandatory = $true)] [object] $HostedZoneId, [parameter()] [DeletionPolicy] $DeletionPolicy, [parameter()] [UpdateReplacePolicy] $UpdateReplacePolicy, [parameter(Mandatory = $false)] [string[]] $DependsOn, [parameter(Mandatory = $false)] [VSJson] $Metadata, [parameter(Mandatory = $false)] [UpdatePolicy] $UpdatePolicy, [parameter(Mandatory = $false)] [string] $Condition ) Process { $obj = [Route53DNSSEC]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'New-VSRoute53DNSSEC' function New-VSRoute53HealthCheck { <# .SYNOPSIS Adds an AWS::Route53::HealthCheck resource to the template. The AWS::Route53::HealthCheck resource is a Route 53 resource type that contains settings for a Route 53 health check. .DESCRIPTION Adds an AWS::Route53::HealthCheck resource to the template. The AWS::Route53::HealthCheck resource is a Route 53 resource type that contains settings for a Route 53 health check. For information about associating health checks with records, see HealthCheckId: https://docs.aws.amazon.com/Route53/latest/APIReference/API_ResourceRecordSet.html#Route53-Type-ResourceRecordSet-HealthCheckId in ChangeResourceRecordSets: https://docs.aws.amazon.com/Route53/latest/APIReference/API_ChangeResourceRecordSets.html. **ELB Load Balancers** If you're registering EC2 instances with an Elastic Load Balancing (ELB load balancer, do not create Amazon Route 53 health checks for the EC2 instances. When you register an EC2 instance with a load balancer, you configure settings for an ELB health check, which performs a similar function to a Route 53 health check. **Private Hosted Zones** You can associate health checks with failover records in a private hosted zone. Note the following: + Route 53 health checkers are outside the VPC. To check the health of an endpoint within a VPC by IP address, you must assign a public IP address to the instance in the VPC. + You can configure a health checker to check the health of an external resource that the instance relies on, such as a database server. + You can create a CloudWatch metric, associate an alarm with the metric, and then create a health check that is based on the state of the alarm. For example, you might create a CloudWatch metric that checks the status of the Amazon EC2 StatusCheckFailed metric, add an alarm to the metric, and then create a health check that is based on the state of the alarm. For information about creating CloudWatch metrics and alarms by using the CloudWatch console, see the Amazon CloudWatch User Guide: https://docs.aws.amazon.com/AmazonCloudWatch/latest/DeveloperGuide/WhatIsCloudWatch.html. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-route53-healthcheck.html .PARAMETER LogicalId The logical ID must be alphanumeric (A-Za-z0-9) and unique within the template. Use the logical name to reference the resource in other parts of the template. For example, if you want to map an Amazon Elastic Block Store volume to an Amazon EC2 instance, you reference the logical IDs to associate the block stores with the instance. .PARAMETER HealthCheckConfig A complex type that contains detailed information about one health check. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-route53-healthcheck.html#cfn-route53-healthcheck-healthcheckconfig UpdateType: Mutable PrimitiveType: Json .PARAMETER HealthCheckTags The HealthCheckTags property describes key-value pairs that are associated with an AWS::Route53::HealthCheck resource. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-route53-healthcheck.html#cfn-route53-healthcheck-healthchecktags UpdateType: Mutable Type: List ItemType: HealthCheckTag DuplicatesAllowed: False .PARAMETER DeletionPolicy With the DeletionPolicy attribute you can preserve or (in some cases) backup a resource when its stack is deleted. You specify a DeletionPolicy attribute for each resource that you want to control. If a resource has no DeletionPolicy attribute, AWS CloudFormation deletes the resource by default. To keep a resource when its stack is deleted, specify Retain for that resource. You can use retain for any resource. For example, you can retain a nested stack, S3 bucket, or EC2 instance so that you can continue to use or modify those resources after you delete their stacks. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER UpdateReplacePolicy Use the UpdateReplacePolicy attribute to retain or (in some cases) backup the existing physical instance of a resource when it is replaced during a stack update operation. When you initiate a stack update, AWS CloudFormation updates resources based on differences between what you submit and the stack's current template and parameters. If you update a resource property that requires that the resource be replaced, AWS CloudFormation recreates the resource during the update. Recreating the resource generates a new physical ID. AWS CloudFormation creates the replacement resource first, and then changes references from other dependent resources to point to the replacement resource. By default, AWS CloudFormation then deletes the old resource. Using the UpdateReplacePolicy, you can specify that AWS CloudFormation retain or (in some cases) create a snapshot of the old resource. For resources that support snapshots, such as AWS::EC2::Volume, specify Snapshot to have AWS CloudFormation create a snapshot before deleting the old resource instance. You can apply the UpdateReplacePolicy attribute to any resource. UpdateReplacePolicy is only executed if you update a resource property whose update behavior is specified as Replacement, thereby causing AWS CloudFormation to replace the old resource with a new one with a new physical ID. For example, if you update the Engine property of an AWS::RDS::DBInstance resource type, AWS CloudFormation creates a new resource and replaces the current DB instance resource with the new one. The UpdateReplacePolicy attribute would then dictate whether AWS CloudFormation deleted, retained, or created a snapshot of the old DB instance. The update behavior for each property of a resource is specified in the reference topic for that resource in the AWS Resource and Property Types Reference. For more information on resource update behavior, see Update Behaviors of Stack Resources. The UpdateReplacePolicy attribute applies to stack updates you perform directly, as well as stack updates performed using change sets. Note Resources that are retained continue to exist and continue to incur applicable charges until you delete those resources. Snapshots that are created with this policy continue to exist and continue to incur applicable charges until you delete those snapshots. UpdateReplacePolicy retains the old physical resource or snapshot, but removes it from AWS CloudFormation's scope. UpdateReplacePolicy differs from the DeletionPolicy attribute in that it only applies to resources replaced during stack updates. Use DeletionPolicy for resources deleted when a stack is deleted, or when the resource definition itself is deleted from the template as part of a stack update. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER DependsOn With the DependsOn attribute you can specify that the creation of a specific resource follows another. When you add a DependsOn attribute to a resource, that resource is created only after the creation of the resource specified in the DependsOn attribute. This parameter takes a string or list of strings representing Logical IDs of resources that must be created prior to this resource being created. .PARAMETER Metadata The Metadata attribute enables you to associate structured data with a resource. By adding a Metadata attribute to a resource, you can add data in JSON or YAML to the resource declaration. In addition, you can use intrinsic functions (such as GetAtt and Ref), parameters, and pseudo parameters within the Metadata attribute to add those interpreted values. This will be returned when describing the resource using AWS CLI. .PARAMETER UpdatePolicy Use the UpdatePolicy attribute to specify how AWS CloudFormation handles updates to the AWS::AutoScaling::AutoScalingGroup resource. AWS CloudFormation invokes one of three update policies depending on the type of change you make or whether a scheduled action is associated with the Auto Scaling group. You must use the "Add-UpdatePolicy" function or the [UpdatePolicy] class here. .PARAMETER Condition Logical ID of the condition that this resource needs to be true in order for this resource to be provisioned. .FUNCTIONALITY Vaporshell #> [OutputType([Route53HealthCheck])] [cmdletbinding()] Param( [parameter(Mandatory = $true,Position = 0)] [ValidateLogicalId()] [string] $LogicalId, [parameter(Mandatory = $true)] [VSJson] $HealthCheckConfig, [parameter(Mandatory = $false)] [object] $HealthCheckTags, [parameter()] [DeletionPolicy] $DeletionPolicy, [parameter()] [UpdateReplacePolicy] $UpdateReplacePolicy, [parameter(Mandatory = $false)] [string[]] $DependsOn, [parameter(Mandatory = $false)] [VSJson] $Metadata, [parameter(Mandatory = $false)] [UpdatePolicy] $UpdatePolicy, [parameter(Mandatory = $false)] [string] $Condition ) Process { $obj = [Route53HealthCheck]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'New-VSRoute53HealthCheck' function New-VSRoute53HostedZone { <# .SYNOPSIS Adds an AWS::Route53::HostedZone resource to the template. The AWS::Route53::HostedZone resource is a Route 53 resource type that contains information about how you want to route traffic for a domain (example.com and its subdomains (acme.example.com, zenith.example.com: .DESCRIPTION Adds an AWS::Route53::HostedZone resource to the template. The AWS::Route53::HostedZone resource is a Route 53 resource type that contains information about how you want to route traffic for a domain (example.com and its subdomains (acme.example.com, zenith.example.com: + Records in a public hosted zone define how you want to route traffic on the internet. + Records in a private hosted zone define how you want to route traffic within one or more Amazon Virtual Private Clouds (Amazon VPCs. **Important** You can't convert a public hosted zone to a private hosted zone or vice versa. Instead, you must create a new hosted zone with the same name and create new records. For more information about charges for hosted zones, see Amazon Route 53 Pricing: http://aws.amazon.com/route53/pricing/. Note the following: + You can't create a hosted zone for a top-level domain (TLD such as .com. + For public hosted zones, Amazon Route 53 automatically creates a default SOA record and four NS records for the zone. For more information about SOA and NS records, see NS and SOA Records that Route 53 Creates for a Hosted Zone: https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/SOA-NSrecords.html in the *Amazon Route 53 Developer Guide*. If you want to use the same name servers for multiple public hosted zones, you can optionally associate a reusable delegation set with the hosted zone. Using CloudFormation to create reusable delegation sets isn't supported, but you can create them programmatically using other methods, such as the Route 53 API: https://docs.aws.amazon.com/Route53/latest/APIReference/API_CreateReusableDelegationSet.html, the AWS CLI: https://docs.aws.amazon.com/cli/latest/reference/route53/create-reusable-delegation-set.html, or AWS SDKs: https://docs.aws.amazon.com/ (see the "SDKs & Toolkits" section. + To create a private hosted zone, specify the VPC ID and Region for one VPC in the VPCs: https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-route53-hostedzone.html#cfn-route53-hostedzone-vpcs object. **Note** You can specify only one Amazon VPC when you create a private hosted zone. To associate additional Amazon VPCs with the hosted zone, use AssociateVPCWithHostedZone: https://docs.aws.amazon.com/Route53/latest/APIReference/API_AssociateVPCWithHostedZone.html after you create the hosted zone. + If your domain is registered with a registrar other than Route 53, you must update the name servers with your registrar to make Route 53 the DNS service for the domain. For more information, see Making Amazon Route 53 the DNS Service for an Existing Domain: https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/MigratingDNS.html in the *Amazon Route 53 Developer Guide*. When you submit a CreateHostedZone request, the initial status of the hosted zone is PENDING. For public hosted zones, this means that the NS and SOA records are not yet available on all Route 53 DNS servers. When the NS and SOA records are available, the status of the zone changes to INSYNC. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-route53-hostedzone.html .PARAMETER LogicalId The logical ID must be alphanumeric (A-Za-z0-9) and unique within the template. Use the logical name to reference the resource in other parts of the template. For example, if you want to map an Amazon Elastic Block Store volume to an Amazon EC2 instance, you reference the logical IDs to associate the block stores with the instance. .PARAMETER HostedZoneConfig A complex type that contains an optional comment. If you don't want to specify a comment, omit the HostedZoneConfig and Comment elements. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-route53-hostedzone.html#cfn-route53-hostedzone-hostedzoneconfig UpdateType: Mutable Type: HostedZoneConfig .PARAMETER HostedZoneTags Adds, edits, or deletes tags for a health check or a hosted zone. For information about using tags for cost allocation, see Using Cost Allocation Tags: https://docs.aws.amazon.com/awsaccountbilling/latest/aboutv2/cost-alloc-tags.html in the *AWS Billing and Cost Management User Guide*. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-route53-hostedzone.html#cfn-route53-hostedzone-hostedzonetags UpdateType: Mutable Type: List ItemType: HostedZoneTag DuplicatesAllowed: False .PARAMETER Name The name of the domain. Specify a fully qualified domain name, for example, *www.example.com*. The trailing dot is optional; Amazon Route 53 assumes that the domain name is fully qualified. This means that Route 53 treats *www.example.com* without a trailing dot and *www.example.com.* with a trailing dot as identical. If you're creating a public hosted zone, this is the name you have registered with your DNS registrar. If your domain name is registered with a registrar other than Route 53, change the name servers for your domain to the set of NameServers that are returned by the Fn::GetAtt intrinsic function. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-route53-hostedzone.html#cfn-route53-hostedzone-name UpdateType: Immutable PrimitiveType: String .PARAMETER QueryLoggingConfig Creates a configuration for DNS query logging. After you create a query logging configuration, Amazon Route 53 begins to publish log data to an Amazon CloudWatch Logs log group. DNS query logs contain information about the queries that Route 53 receives for a specified public hosted zone, such as the following: + Route 53 edge location that responded to the DNS query + Domain or subdomain that was requested + DNS record type, such as A or AAAA + DNS response code, such as NoError or ServFail Log Group and Resource Policy Before you create a query logging configuration, perform the following operations. If you create a query logging configuration using the Route 53 console, Route 53 performs these operations automatically. 1. Create a CloudWatch Logs log group, and make note of the ARN, which you specify when you create a query logging configuration. Note the following: + You must create the log group in the us-east-1 region. + You must use the same AWS account to create the log group and the hosted zone that you want to configure query logging for. + When you create log groups for query logging, we recommend that you use a consistent prefix, for example: /aws/route53/hosted zone name In the next step, you'll create a resource policy, which controls access to one or more log groups and the associated AWS resources, such as Route 53 hosted zones. There's a limit on the number of resource policies that you can create, so we recommend that you use a consistent prefix so you can use the same resource policy for all the log groups that you create for query logging. 1. Create a CloudWatch Logs resource policy, and give it the permissions that Route 53 needs to create log streams and to send query logs to log streams. For the value of Resource, specify the ARN for the log group that you created in the previous step. To use the same resource policy for all the CloudWatch Logs log groups that you created for query logging configurations, replace the hosted zone name with *, for example: arn:aws:logs:us-east-1:123412341234:log-group:/aws/route53/* **Note** You can't use the CloudWatch console to create or edit a resource policy. You must use the CloudWatch API, one of the AWS SDKs, or the AWS CLI. Log Streams and Edge Locations When Route 53 finishes creating the configuration for DNS query logging, it does the following: + Creates a log stream for an edge location the first time that the edge location responds to DNS queries for the specified hosted zone. That log stream is used to log all queries that Route 53 responds to for that edge location. + Begins to send query logs to the applicable log stream. The name of each log stream is in the following format: hosted zone ID/edge location code The edge location code is a three-letter code and an arbitrarily assigned number, for example, DFW3. The three-letter code typically corresponds with the International Air Transport Association airport code for an airport near the edge location. These abbreviations might change in the future. For a list of edge locations, see "The Route 53 Global Network" on the Route 53 Product Details: http://aws.amazon.com/route53/details/ page. Queries That Are Logged Query logs contain only the queries that DNS resolvers forward to Route 53. If a DNS resolver has already cached the response to a query such as the IP address for a load balancer for example.com, the resolver will continue to return the cached response. It doesn't forward another query to Route 53 until the TTL for the corresponding resource record set expires. Depending on how many DNS queries are submitted for a resource record set, and depending on the TTL for that resource record set, query logs might contain information about only one query out of every several thousand queries that are submitted to DNS. For more information about how DNS works, see Routing Internet Traffic to Your Website or Web Application: https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/welcome-dns-service.html in the *Amazon Route 53 Developer Guide*. Log File Format For a list of the values in each query log and the format of each value, see Logging DNS Queries: https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/query-logs.html in the *Amazon Route 53 Developer Guide*. Pricing For information about charges for query logs, see Amazon CloudWatch Pricing: http://aws.amazon.com/cloudwatch/pricing/. How to Stop Logging If you want Route 53 to stop sending query logs to CloudWatch Logs, delete the query logging configuration. For more information, see DeleteQueryLoggingConfig: https://docs.aws.amazon.com/Route53/latest/APIReference/API_DeleteQueryLoggingConfig.html. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-route53-hostedzone.html#cfn-route53-hostedzone-queryloggingconfig UpdateType: Mutable Type: QueryLoggingConfig .PARAMETER VPCs *Private hosted zones:* A complex type that contains information about the VPCs that are associated with the specified hosted zone. For public hosted zones, omit VPCs, VPCId, and VPCRegion. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-route53-hostedzone.html#cfn-route53-hostedzone-vpcs UpdateType: Mutable Type: List ItemType: VPC DuplicatesAllowed: False .PARAMETER DeletionPolicy With the DeletionPolicy attribute you can preserve or (in some cases) backup a resource when its stack is deleted. You specify a DeletionPolicy attribute for each resource that you want to control. If a resource has no DeletionPolicy attribute, AWS CloudFormation deletes the resource by default. To keep a resource when its stack is deleted, specify Retain for that resource. You can use retain for any resource. For example, you can retain a nested stack, S3 bucket, or EC2 instance so that you can continue to use or modify those resources after you delete their stacks. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER UpdateReplacePolicy Use the UpdateReplacePolicy attribute to retain or (in some cases) backup the existing physical instance of a resource when it is replaced during a stack update operation. When you initiate a stack update, AWS CloudFormation updates resources based on differences between what you submit and the stack's current template and parameters. If you update a resource property that requires that the resource be replaced, AWS CloudFormation recreates the resource during the update. Recreating the resource generates a new physical ID. AWS CloudFormation creates the replacement resource first, and then changes references from other dependent resources to point to the replacement resource. By default, AWS CloudFormation then deletes the old resource. Using the UpdateReplacePolicy, you can specify that AWS CloudFormation retain or (in some cases) create a snapshot of the old resource. For resources that support snapshots, such as AWS::EC2::Volume, specify Snapshot to have AWS CloudFormation create a snapshot before deleting the old resource instance. You can apply the UpdateReplacePolicy attribute to any resource. UpdateReplacePolicy is only executed if you update a resource property whose update behavior is specified as Replacement, thereby causing AWS CloudFormation to replace the old resource with a new one with a new physical ID. For example, if you update the Engine property of an AWS::RDS::DBInstance resource type, AWS CloudFormation creates a new resource and replaces the current DB instance resource with the new one. The UpdateReplacePolicy attribute would then dictate whether AWS CloudFormation deleted, retained, or created a snapshot of the old DB instance. The update behavior for each property of a resource is specified in the reference topic for that resource in the AWS Resource and Property Types Reference. For more information on resource update behavior, see Update Behaviors of Stack Resources. The UpdateReplacePolicy attribute applies to stack updates you perform directly, as well as stack updates performed using change sets. Note Resources that are retained continue to exist and continue to incur applicable charges until you delete those resources. Snapshots that are created with this policy continue to exist and continue to incur applicable charges until you delete those snapshots. UpdateReplacePolicy retains the old physical resource or snapshot, but removes it from AWS CloudFormation's scope. UpdateReplacePolicy differs from the DeletionPolicy attribute in that it only applies to resources replaced during stack updates. Use DeletionPolicy for resources deleted when a stack is deleted, or when the resource definition itself is deleted from the template as part of a stack update. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER DependsOn With the DependsOn attribute you can specify that the creation of a specific resource follows another. When you add a DependsOn attribute to a resource, that resource is created only after the creation of the resource specified in the DependsOn attribute. This parameter takes a string or list of strings representing Logical IDs of resources that must be created prior to this resource being created. .PARAMETER Metadata The Metadata attribute enables you to associate structured data with a resource. By adding a Metadata attribute to a resource, you can add data in JSON or YAML to the resource declaration. In addition, you can use intrinsic functions (such as GetAtt and Ref), parameters, and pseudo parameters within the Metadata attribute to add those interpreted values. This will be returned when describing the resource using AWS CLI. .PARAMETER UpdatePolicy Use the UpdatePolicy attribute to specify how AWS CloudFormation handles updates to the AWS::AutoScaling::AutoScalingGroup resource. AWS CloudFormation invokes one of three update policies depending on the type of change you make or whether a scheduled action is associated with the Auto Scaling group. You must use the "Add-UpdatePolicy" function or the [UpdatePolicy] class here. .PARAMETER Condition Logical ID of the condition that this resource needs to be true in order for this resource to be provisioned. .FUNCTIONALITY Vaporshell #> [OutputType([Route53HostedZone])] [cmdletbinding()] Param( [parameter(Mandatory = $true,Position = 0)] [ValidateLogicalId()] [string] $LogicalId, [parameter(Mandatory = $false)] $HostedZoneConfig, [parameter(Mandatory = $false)] [object] $HostedZoneTags, [parameter(Mandatory = $false)] [object] $Name, [parameter(Mandatory = $false)] $QueryLoggingConfig, [parameter(Mandatory = $false)] [object] $VPCs, [parameter()] [DeletionPolicy] $DeletionPolicy, [parameter()] [UpdateReplacePolicy] $UpdateReplacePolicy, [parameter(Mandatory = $false)] [string[]] $DependsOn, [parameter(Mandatory = $false)] [VSJson] $Metadata, [parameter(Mandatory = $false)] [UpdatePolicy] $UpdatePolicy, [parameter(Mandatory = $false)] [string] $Condition ) Process { $obj = [Route53HostedZone]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'New-VSRoute53HostedZone' function New-VSRoute53KeySigningKey { <# .SYNOPSIS Adds an AWS::Route53::KeySigningKey resource to the template. .DESCRIPTION Adds an AWS::Route53::KeySigningKey resource to the template. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-route53-keysigningkey.html .PARAMETER LogicalId The logical ID must be alphanumeric (A-Za-z0-9) and unique within the template. Use the logical name to reference the resource in other parts of the template. For example, if you want to map an Amazon Elastic Block Store volume to an Amazon EC2 instance, you reference the logical IDs to associate the block stores with the instance. .PARAMETER HostedZoneId Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-route53-keysigningkey.html#cfn-route53-keysigningkey-hostedzoneid UpdateType: Immutable PrimitiveType: String .PARAMETER Status Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-route53-keysigningkey.html#cfn-route53-keysigningkey-status UpdateType: Mutable PrimitiveType: String .PARAMETER Name Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-route53-keysigningkey.html#cfn-route53-keysigningkey-name UpdateType: Immutable PrimitiveType: String .PARAMETER KeyManagementServiceArn Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-route53-keysigningkey.html#cfn-route53-keysigningkey-keymanagementservicearn UpdateType: Immutable PrimitiveType: String .PARAMETER DeletionPolicy With the DeletionPolicy attribute you can preserve or (in some cases) backup a resource when its stack is deleted. You specify a DeletionPolicy attribute for each resource that you want to control. If a resource has no DeletionPolicy attribute, AWS CloudFormation deletes the resource by default. To keep a resource when its stack is deleted, specify Retain for that resource. You can use retain for any resource. For example, you can retain a nested stack, S3 bucket, or EC2 instance so that you can continue to use or modify those resources after you delete their stacks. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER UpdateReplacePolicy Use the UpdateReplacePolicy attribute to retain or (in some cases) backup the existing physical instance of a resource when it is replaced during a stack update operation. When you initiate a stack update, AWS CloudFormation updates resources based on differences between what you submit and the stack's current template and parameters. If you update a resource property that requires that the resource be replaced, AWS CloudFormation recreates the resource during the update. Recreating the resource generates a new physical ID. AWS CloudFormation creates the replacement resource first, and then changes references from other dependent resources to point to the replacement resource. By default, AWS CloudFormation then deletes the old resource. Using the UpdateReplacePolicy, you can specify that AWS CloudFormation retain or (in some cases) create a snapshot of the old resource. For resources that support snapshots, such as AWS::EC2::Volume, specify Snapshot to have AWS CloudFormation create a snapshot before deleting the old resource instance. You can apply the UpdateReplacePolicy attribute to any resource. UpdateReplacePolicy is only executed if you update a resource property whose update behavior is specified as Replacement, thereby causing AWS CloudFormation to replace the old resource with a new one with a new physical ID. For example, if you update the Engine property of an AWS::RDS::DBInstance resource type, AWS CloudFormation creates a new resource and replaces the current DB instance resource with the new one. The UpdateReplacePolicy attribute would then dictate whether AWS CloudFormation deleted, retained, or created a snapshot of the old DB instance. The update behavior for each property of a resource is specified in the reference topic for that resource in the AWS Resource and Property Types Reference. For more information on resource update behavior, see Update Behaviors of Stack Resources. The UpdateReplacePolicy attribute applies to stack updates you perform directly, as well as stack updates performed using change sets. Note Resources that are retained continue to exist and continue to incur applicable charges until you delete those resources. Snapshots that are created with this policy continue to exist and continue to incur applicable charges until you delete those snapshots. UpdateReplacePolicy retains the old physical resource or snapshot, but removes it from AWS CloudFormation's scope. UpdateReplacePolicy differs from the DeletionPolicy attribute in that it only applies to resources replaced during stack updates. Use DeletionPolicy for resources deleted when a stack is deleted, or when the resource definition itself is deleted from the template as part of a stack update. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER DependsOn With the DependsOn attribute you can specify that the creation of a specific resource follows another. When you add a DependsOn attribute to a resource, that resource is created only after the creation of the resource specified in the DependsOn attribute. This parameter takes a string or list of strings representing Logical IDs of resources that must be created prior to this resource being created. .PARAMETER Metadata The Metadata attribute enables you to associate structured data with a resource. By adding a Metadata attribute to a resource, you can add data in JSON or YAML to the resource declaration. In addition, you can use intrinsic functions (such as GetAtt and Ref), parameters, and pseudo parameters within the Metadata attribute to add those interpreted values. This will be returned when describing the resource using AWS CLI. .PARAMETER UpdatePolicy Use the UpdatePolicy attribute to specify how AWS CloudFormation handles updates to the AWS::AutoScaling::AutoScalingGroup resource. AWS CloudFormation invokes one of three update policies depending on the type of change you make or whether a scheduled action is associated with the Auto Scaling group. You must use the "Add-UpdatePolicy" function or the [UpdatePolicy] class here. .PARAMETER Condition Logical ID of the condition that this resource needs to be true in order for this resource to be provisioned. .FUNCTIONALITY Vaporshell #> [OutputType([Route53KeySigningKey])] [cmdletbinding()] Param( [parameter(Mandatory = $true,Position = 0)] [ValidateLogicalId()] [string] $LogicalId, [parameter(Mandatory = $true)] [object] $HostedZoneId, [parameter(Mandatory = $true)] [object] $Status, [parameter(Mandatory = $true)] [object] $Name, [parameter(Mandatory = $true)] [object] $KeyManagementServiceArn, [parameter()] [DeletionPolicy] $DeletionPolicy, [parameter()] [UpdateReplacePolicy] $UpdateReplacePolicy, [parameter(Mandatory = $false)] [string[]] $DependsOn, [parameter(Mandatory = $false)] [VSJson] $Metadata, [parameter(Mandatory = $false)] [UpdatePolicy] $UpdatePolicy, [parameter(Mandatory = $false)] [string] $Condition ) Process { $obj = [Route53KeySigningKey]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'New-VSRoute53KeySigningKey' function New-VSRoute53RecordSet { <# .SYNOPSIS Adds an AWS::Route53::RecordSet resource to the template. Information about the record that you want to create. .DESCRIPTION Adds an AWS::Route53::RecordSet resource to the template. Information about the record that you want to create. The AWS::Route53::RecordSet type can be used as a standalone resource or as an embedded property in the AWS::Route53::RecordSetGroup type. Note that some AWS::Route53::RecordSet properties are valid only when used within AWS::Route53::RecordSetGroup. For more information, see ChangeResourceRecordSets: https://docs.aws.amazon.com/Route53/latest/APIReference/API_ChangeResourceRecordSets.html in the *Amazon Route 53 API Reference*. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-route53-recordset.html .PARAMETER LogicalId The logical ID must be alphanumeric (A-Za-z0-9) and unique within the template. Use the logical name to reference the resource in other parts of the template. For example, if you want to map an Amazon Elastic Block Store volume to an Amazon EC2 instance, you reference the logical IDs to associate the block stores with the instance. .PARAMETER AliasTarget *Alias resource record sets only:* Information about the AWS resource, such as a CloudFront distribution or an Amazon S3 bucket, that you want to route traffic to. If you're creating resource records sets for a private hosted zone, note the following: + You can't create an alias resource record set in a private hosted zone to route traffic to a CloudFront distribution. + Creating geolocation alias resource record sets or latency alias resource record sets in a private hosted zone is unsupported. + For information about creating failover resource record sets in a private hosted zone, see Configuring Failover in a Private Hosted Zone: https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/dns-failover-private-hosted-zones.html in the *Amazon Route 53 Developer Guide*. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-route53-recordset.html#cfn-route53-recordset-aliastarget Type: AliasTarget UpdateType: Mutable .PARAMETER Comment *Optional:* Any comments you want to include about a change batch request. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-route53-recordset.html#cfn-route53-recordset-comment PrimitiveType: String UpdateType: Mutable .PARAMETER Failover *Failover resource record sets only:* To configure failover, you add the Failover element to two resource record sets. For one resource record set, you specify PRIMARY as the value for Failover; for the other resource record set, you specify SECONDARY. In addition, you include the HealthCheckId element and specify the health check that you want Amazon Route 53 to perform for each resource record set. Except where noted, the following failover behaviors assume that you have included the HealthCheckId element in both resource record sets: + When the primary resource record set is healthy, Route 53 responds to DNS queries with the applicable value from the primary resource record set regardless of the health of the secondary resource record set. + When the primary resource record set is unhealthy and the secondary resource record set is healthy, Route 53 responds to DNS queries with the applicable value from the secondary resource record set. + When the secondary resource record set is unhealthy, Route 53 responds to DNS queries with the applicable value from the primary resource record set regardless of the health of the primary resource record set. + If you omit the HealthCheckId element for the secondary resource record set, and if the primary resource record set is unhealthy, Route 53 always responds to DNS queries with the applicable value from the secondary resource record set. This is true regardless of the health of the associated endpoint. You can't create non-failover resource record sets that have the same values for the Name and Type elements as failover resource record sets. For failover alias resource record sets, you must also include the EvaluateTargetHealth element and set the value to true. For more information about configuring failover for Route 53, see the following topics in the *Amazon Route 53 Developer Guide*: + Route 53 Health Checks and DNS Failover: https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/dns-failover.html + Configuring Failover in a Private Hosted Zone: https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/dns-failover-private-hosted-zones.html Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-route53-recordset.html#cfn-route53-recordset-failover PrimitiveType: String UpdateType: Mutable .PARAMETER GeoLocation *Geolocation resource record sets only:* A complex type that lets you control how Amazon Route 53 responds to DNS queries based on the geographic origin of the query. For example, if you want all queries from Africa to be routed to a web server with an IP address of 192.0.2.111, create a resource record set with a Type of A and a ContinentCode of AF. Although creating geolocation and geolocation alias resource record sets in a private hosted zone is allowed, it's not supported. If you create separate resource record sets for overlapping geographic regions for example, one resource record set for a continent and one for a country on the same continent, priority goes to the smallest geographic region. This allows you to route most queries for a continent to one resource and to route queries for a country on that continent to a different resource. You can't create two geolocation resource record sets that specify the same geographic location. The value * in the CountryCode element matches all geographic locations that aren't specified in other geolocation resource record sets that have the same values for the Name and Type elements. Geolocation works by mapping IP addresses to locations. However, some IP addresses aren't mapped to geographic locations, so even if you create geolocation resource record sets that cover all seven continents, Route 53 will receive some DNS queries from locations that it can't identify. We recommend that you create a resource record set for which the value of CountryCode is *. Two groups of queries are routed to the resource that you specify in this record: queries that come from locations for which you haven't created geolocation resource record sets and queries from IP addresses that aren't mapped to a location. If you don't create a * resource record set, Route 53 returns a "no answer" response for queries from those locations. You can't create non-geolocation resource record sets that have the same values for the Name and Type elements as geolocation resource record sets. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-route53-recordset.html#cfn-route53-recordset-geolocation Type: GeoLocation UpdateType: Mutable .PARAMETER HealthCheckId If you want Amazon Route 53 to return this resource record set in response to a DNS query only when the status of a health check is healthy, include the HealthCheckId element and specify the ID of the applicable health check. Route 53 determines whether a resource record set is healthy based on one of the following: + By periodically sending a request to the endpoint that is specified in the health check + By aggregating the status of a specified group of health checks calculated health checks + By determining the current state of a CloudWatch alarm CloudWatch metric health checks Route 53 doesn't check the health of the endpoint that is specified in the resource record set, for example, the endpoint specified by the IP address in the Value element. When you add a HealthCheckId element to a resource record set, Route 53 checks the health of the endpoint that you specified in the health check. For more information, see the following topics in the *Amazon Route 53 Developer Guide*: + How Amazon Route 53 Determines Whether an Endpoint Is Healthy: https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/dns-failover-determining-health-of-endpoints.html + Route 53 Health Checks and DNS Failover: https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/dns-failover.html + Configuring Failover in a Private Hosted Zone: https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/dns-failover-private-hosted-zones.html **When to Specify HealthCheckId** Specifying a value for HealthCheckId is useful only when Route 53 is choosing between two or more resource record sets to respond to a DNS query, and you want Route 53 to base the choice in part on the status of a health check. Configuring health checks makes sense only in the following configurations: + **Non-alias resource record sets**: You're checking the health of a group of non-alias resource record sets that have the same routing policy, name, and type such as multiple weighted records named www.example.com with a type of A and you specify health check IDs for all the resource record sets. If the health check status for a resource record set is healthy, Route 53 includes the record among the records that it responds to DNS queries with. If the health check status for a resource record set is unhealthy, Route 53 stops responding to DNS queries using the value for that resource record set. If the health check status for all resource record sets in the group is unhealthy, Route 53 considers all resource record sets in the group healthy and responds to DNS queries accordingly. + **Alias resource record sets**: You specify the following settings: + You set EvaluateTargetHealth to true for an alias resource record set in a group of resource record sets that have the same routing policy, name, and type such as multiple weighted records named www.example.com with a type of A. + You configure the alias resource record set to route traffic to a non-alias resource record set in the same hosted zone. + You specify a health check ID for the non-alias resource record set. If the health check status is healthy, Route 53 considers the alias resource record set to be healthy and includes the alias record among the records that it responds to DNS queries with. If the health check status is unhealthy, Route 53 stops responding to DNS queries using the alias resource record set. **Note** The alias resource record set can also route traffic to a *group* of non-alias resource record sets that have the same routing policy, name, and type. In that configuration, associate health checks with all of the resource record sets in the group of non-alias resource record sets. **Geolocation Routing** For geolocation resource record sets, if an endpoint is unhealthy, Route 53 looks for a resource record set for the larger, associated geographic region. For example, suppose you have resource record sets for a state in the United States, for the entire United States, for North America, and a resource record set that has * for CountryCode is *, which applies to all locations. If the endpoint for the state resource record set is unhealthy, Route 53 checks for healthy resource record sets in the following order until it finds a resource record set for which the endpoint is healthy: + The United States + North America + The default resource record set **Specifying the Health Check Endpoint by Domain Name** If your health checks specify the endpoint only by domain name, we recommend that you create a separate health check for each endpoint. For example, create a health check for each HTTP server that is serving content for www.example.com. For the value of FullyQualifiedDomainName, specify the domain name of the server such as us-east-2-www.example.com, not the name of the resource record sets www.example.com. Health check results will be unpredictable if you do the following: + Create a health check that has the same value for FullyQualifiedDomainName as the name of a resource record set. + Associate that health check with the resource record set. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-route53-recordset.html#cfn-route53-recordset-healthcheckid PrimitiveType: String UpdateType: Mutable .PARAMETER HostedZoneId The ID of the hosted zone that you want to create records in. Specify either HostedZoneName or HostedZoneId, but not both. If you have multiple hosted zones with the same domain name, you must specify the hosted zone using HostedZoneId. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-route53-recordset.html#cfn-route53-recordset-hostedzoneid PrimitiveType: String UpdateType: Immutable .PARAMETER HostedZoneName The name of the hosted zone that you want to create records in. When you create a stack using an AWS::Route53::RecordSet that specifies HostedZoneName, AWS CloudFormation attempts to find a hosted zone whose name matches the HostedZoneName. If AWS CloudFormation cannot find a hosted zone with a matching domain name, or if there is more than one hosted zone with the specified domain name, AWS CloudFormation will not create the stack. Specify either HostedZoneName or HostedZoneId, but not both. If you have multiple hosted zones with the same domain name, you must specify the hosted zone using HostedZoneId. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-route53-recordset.html#cfn-route53-recordset-hostedzonename PrimitiveType: String UpdateType: Immutable .PARAMETER MultiValueAnswer *Multivalue answer resource record sets only*: To route traffic approximately randomly to multiple resources, such as web servers, create one multivalue answer record for each resource and specify true for MultiValueAnswer. Note the following: + If you associate a health check with a multivalue answer resource record set, Amazon Route 53 responds to DNS queries with the corresponding IP address only when the health check is healthy. + If you don't associate a health check with a multivalue answer record, Route 53 always considers the record to be healthy. + Route 53 responds to DNS queries with up to eight healthy records; if you have eight or fewer healthy records, Route 53 responds to all DNS queries with all the healthy records. + If you have more than eight healthy records, Route 53 responds to different DNS resolvers with different combinations of healthy records. + When all records are unhealthy, Route 53 responds to DNS queries with up to eight unhealthy records. + If a resource becomes unavailable after a resolver caches a response, client software typically tries another of the IP addresses in the response. You can't create multivalue answer alias records. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-route53-recordset.html#cfn-route53-recordset-multivalueanswer PrimitiveType: Boolean UpdateType: Mutable .PARAMETER Name For ChangeResourceRecordSets requests, the name of the record that you want to create, update, or delete. For ListResourceRecordSets responses, the name of a record in the specified hosted zone. **ChangeResourceRecordSets Only** Enter a fully qualified domain name, for example, www.example.com. You can optionally include a trailing dot. If you omit the trailing dot, Amazon Route 53 assumes that the domain name that you specify is fully qualified. This means that Route 53 treats www.example.com without a trailing dot and www.example.com. with a trailing dot as identical. For information about how to specify characters other than a-z, 0-9, and - hyphen and how to specify internationalized domain names, see DNS Domain Name Format: https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/DomainNameFormat.html in the *Amazon Route 53 Developer Guide*. You can use the asterisk * wildcard to replace the leftmost label in a domain name, for example, *.example.com. Note the following: + The * must replace the entire label. For example, you can't specify *prod.example.com or prod*.example.com. + The * can't replace any of the middle labels, for example, marketing.*.example.com. + If you include * in any position other than the leftmost label in a domain name, DNS treats it as an * character ASCII 42, not as a wildcard. **Important** You can't use the * wildcard for resource records sets that have a type of NS. You can use the * wildcard as the leftmost label in a domain name, for example, *.example.com. You can't use an * for one of the middle labels, for example, marketing.*.example.com. In addition, the * must replace the entire label; for example, you can't specify prod*.example.com. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-route53-recordset.html#cfn-route53-recordset-name PrimitiveType: String UpdateType: Immutable .PARAMETER Region *Latency-based resource record sets only:* The Amazon EC2 Region where you created the resource that this resource record set refers to. The resource typically is an AWS resource, such as an EC2 instance or an ELB load balancer, and is referred to by an IP address or a DNS domain name, depending on the record type. Although creating latency and latency alias resource record sets in a private hosted zone is allowed, it's not supported. When Amazon Route 53 receives a DNS query for a domain name and type for which you have created latency resource record sets, Route 53 selects the latency resource record set that has the lowest latency between the end user and the associated Amazon EC2 Region. Route 53 then returns the value that is associated with the selected resource record set. Note the following: + You can only specify one ResourceRecord per latency resource record set. + You can only create one latency resource record set for each Amazon EC2 Region. + You aren't required to create latency resource record sets for all Amazon EC2 Regions. Route 53 will choose the region with the best latency from among the regions that you create latency resource record sets for. + You can't create non-latency resource record sets that have the same values for the Name and Type elements as latency resource record sets. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-route53-recordset.html#cfn-route53-recordset-region PrimitiveType: String UpdateType: Mutable .PARAMETER ResourceRecords One or more values that correspond with the value that you specified for the Type property. For example, if you specified A for Type, you specify one or more IP addresses in IPv4 format for ResourceRecords. For information about the format of values for each record type, see Supported DNS Resource Record Types: https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/ResourceRecordTypes.html in the *Amazon Route 53 Developer Guide*. Note the following: + You can specify more than one value for all record types except CNAME and SOA. + The maximum length of a value is 4000 characters. + If you're creating an alias record, omit ResourceRecords. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-route53-recordset.html#cfn-route53-recordset-resourcerecords DuplicatesAllowed: True PrimitiveItemType: String Type: List UpdateType: Mutable .PARAMETER SetIdentifier *Resource record sets that have a routing policy other than simple:* An identifier that differentiates among multiple resource record sets that have the same combination of name and type, such as multiple weighted resource record sets named acme.example.com that have a type of A. In a group of resource record sets that have the same name and type, the value of SetIdentifier must be unique for each resource record set. For information about routing policies, see Choosing a Routing Policy: https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/routing-policy.html in the *Amazon Route 53 Developer Guide*. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-route53-recordset.html#cfn-route53-recordset-setidentifier PrimitiveType: String UpdateType: Mutable .PARAMETER TTL The resource record cache time to live TTL, in seconds. Note the following: + If you're creating or updating an alias resource record set, omit TTL. Amazon Route 53 uses the value of TTL for the alias target. + If you're associating this resource record set with a health check if you're adding a HealthCheckId element, we recommend that you specify a TTL of 60 seconds or less so clients respond quickly to changes in health status. + All of the resource record sets in a group of weighted resource record sets must have the same value for TTL. + If a group of weighted resource record sets includes one or more weighted alias resource record sets for which the alias target is an ELB load balancer, we recommend that you specify a TTL of 60 seconds for all of the non-alias weighted resource record sets that have the same name and type. Values other than 60 seconds the TTL for load balancers will change the effect of the values that you specify for Weight. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-route53-recordset.html#cfn-route53-recordset-ttl PrimitiveType: String UpdateType: Mutable .PARAMETER Type The DNS record type. For information about different record types and how data is encoded for them, see Supported DNS Resource Record Types: https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/ResourceRecordTypes.html in the *Amazon Route 53 Developer Guide*. Valid values for basic resource record sets: A | AAAA | CAA | CNAME | MX | NAPTR | NS | PTR | SOA | SPF | SRV | TXT Values for weighted, latency, geolocation, and failover resource record sets: A | AAAA | CAA | CNAME | MX | NAPTR | PTR | SPF | SRV | TXT. When creating a group of weighted, latency, geolocation, or failover resource record sets, specify the same value for all of the resource record sets in the group. Valid values for multivalue answer resource record sets: A | AAAA | MX | NAPTR | PTR | SPF | SRV | TXT SPF records were formerly used to verify the identity of the sender of email messages. However, we no longer recommend that you create resource record sets for which the value of Type is SPF. RFC 7208, *Sender Policy Framework SPF for Authorizing Use of Domains in Email, Version 1*, has been updated to say, "...I]ts existence and mechanism defined in RFC4408] have led to some interoperability issues. Accordingly, its use is no longer appropriate for SPF version 1; implementations are not to use it." In RFC 7208, see section 14.1, The SPF DNS Record Type: http://tools.ietf.org/html/rfc7208#section-14.1. Values for alias resource record sets: + **Amazon API Gateway custom regional APIs and edge-optimized APIs:** A + **CloudFront distributions:** A If IPv6 is enabled for the distribution, create two resource record sets to route traffic to your distribution, one with a value of A and one with a value of AAAA. + **Amazon API Gateway environment that has a regionalized subdomain**: A + **ELB load balancers:** A | AAAA + **Amazon S3 buckets:** A + **Amazon Virtual Private Cloud interface VPC endpoints** A + **Another resource record set in this hosted zone:** Specify the type of the resource record set that you're creating the alias for. All values are supported except NS and SOA. **Note** If you're creating an alias record that has the same name as the hosted zone known as the zone apex, you can't route traffic to a record for which the value of Type is CNAME. This is because the alias record must have the same type as the record you're routing traffic to, and creating a CNAME record for the zone apex isn't supported even for an alias record. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-route53-recordset.html#cfn-route53-recordset-type PrimitiveType: String UpdateType: Mutable .PARAMETER Weight *Weighted resource record sets only:* Among resource record sets that have the same combination of DNS name and type, a value that determines the proportion of DNS queries that Amazon Route 53 responds to using the current resource record set. Route 53 calculates the sum of the weights for the resource record sets that have the same combination of DNS name and type. Route 53 then responds to queries based on the ratio of a resource's weight to the total. Note the following: + You must specify a value for the Weight element for every weighted resource record set. + You can only specify one ResourceRecord per weighted resource record set. + You can't create latency, failover, or geolocation resource record sets that have the same values for the Name and Type elements as weighted resource record sets. + You can create a maximum of 100 weighted resource record sets that have the same values for the Name and Type elements. + For weighted but not weighted alias resource record sets, if you set Weight to 0 for a resource record set, Route 53 never responds to queries with the applicable value for that resource record set. However, if you set Weight to 0 for all resource record sets that have the same combination of DNS name and type, traffic is routed to all resources with equal probability. The effect of setting Weight to 0 is different when you associate health checks with weighted resource record sets. For more information, see Options for Configuring Route 53 Active-Active and Active-Passive Failover: https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/dns-failover-configuring-options.html in the *Amazon Route 53 Developer Guide*. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-route53-recordset.html#cfn-route53-recordset-weight PrimitiveType: Integer UpdateType: Mutable .PARAMETER DeletionPolicy With the DeletionPolicy attribute you can preserve or (in some cases) backup a resource when its stack is deleted. You specify a DeletionPolicy attribute for each resource that you want to control. If a resource has no DeletionPolicy attribute, AWS CloudFormation deletes the resource by default. To keep a resource when its stack is deleted, specify Retain for that resource. You can use retain for any resource. For example, you can retain a nested stack, S3 bucket, or EC2 instance so that you can continue to use or modify those resources after you delete their stacks. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER UpdateReplacePolicy Use the UpdateReplacePolicy attribute to retain or (in some cases) backup the existing physical instance of a resource when it is replaced during a stack update operation. When you initiate a stack update, AWS CloudFormation updates resources based on differences between what you submit and the stack's current template and parameters. If you update a resource property that requires that the resource be replaced, AWS CloudFormation recreates the resource during the update. Recreating the resource generates a new physical ID. AWS CloudFormation creates the replacement resource first, and then changes references from other dependent resources to point to the replacement resource. By default, AWS CloudFormation then deletes the old resource. Using the UpdateReplacePolicy, you can specify that AWS CloudFormation retain or (in some cases) create a snapshot of the old resource. For resources that support snapshots, such as AWS::EC2::Volume, specify Snapshot to have AWS CloudFormation create a snapshot before deleting the old resource instance. You can apply the UpdateReplacePolicy attribute to any resource. UpdateReplacePolicy is only executed if you update a resource property whose update behavior is specified as Replacement, thereby causing AWS CloudFormation to replace the old resource with a new one with a new physical ID. For example, if you update the Engine property of an AWS::RDS::DBInstance resource type, AWS CloudFormation creates a new resource and replaces the current DB instance resource with the new one. The UpdateReplacePolicy attribute would then dictate whether AWS CloudFormation deleted, retained, or created a snapshot of the old DB instance. The update behavior for each property of a resource is specified in the reference topic for that resource in the AWS Resource and Property Types Reference. For more information on resource update behavior, see Update Behaviors of Stack Resources. The UpdateReplacePolicy attribute applies to stack updates you perform directly, as well as stack updates performed using change sets. Note Resources that are retained continue to exist and continue to incur applicable charges until you delete those resources. Snapshots that are created with this policy continue to exist and continue to incur applicable charges until you delete those snapshots. UpdateReplacePolicy retains the old physical resource or snapshot, but removes it from AWS CloudFormation's scope. UpdateReplacePolicy differs from the DeletionPolicy attribute in that it only applies to resources replaced during stack updates. Use DeletionPolicy for resources deleted when a stack is deleted, or when the resource definition itself is deleted from the template as part of a stack update. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER DependsOn With the DependsOn attribute you can specify that the creation of a specific resource follows another. When you add a DependsOn attribute to a resource, that resource is created only after the creation of the resource specified in the DependsOn attribute. This parameter takes a string or list of strings representing Logical IDs of resources that must be created prior to this resource being created. .PARAMETER Metadata The Metadata attribute enables you to associate structured data with a resource. By adding a Metadata attribute to a resource, you can add data in JSON or YAML to the resource declaration. In addition, you can use intrinsic functions (such as GetAtt and Ref), parameters, and pseudo parameters within the Metadata attribute to add those interpreted values. This will be returned when describing the resource using AWS CLI. .PARAMETER UpdatePolicy Use the UpdatePolicy attribute to specify how AWS CloudFormation handles updates to the AWS::AutoScaling::AutoScalingGroup resource. AWS CloudFormation invokes one of three update policies depending on the type of change you make or whether a scheduled action is associated with the Auto Scaling group. You must use the "Add-UpdatePolicy" function or the [UpdatePolicy] class here. .PARAMETER Condition Logical ID of the condition that this resource needs to be true in order for this resource to be provisioned. .FUNCTIONALITY Vaporshell #> [OutputType([Route53RecordSet])] [cmdletbinding()] Param( [parameter(Mandatory = $true,Position = 0)] [ValidateLogicalId()] [string] $LogicalId, [parameter(Mandatory = $false)] $AliasTarget, [parameter(Mandatory = $false)] [object] $Comment, [parameter(Mandatory = $false)] [object] $Failover, [parameter(Mandatory = $false)] $GeoLocation, [parameter(Mandatory = $false)] [object] $HealthCheckId, [parameter(Mandatory = $false)] [object] $HostedZoneId, [parameter(Mandatory = $false)] [object] $HostedZoneName, [parameter(Mandatory = $false)] [object] $MultiValueAnswer, [parameter(Mandatory = $true)] [object] $Name, [parameter(Mandatory = $false)] [object] $Region, [parameter(Mandatory = $false)] $ResourceRecords, [parameter(Mandatory = $false)] [object] $SetIdentifier, [parameter(Mandatory = $false)] [object] $TTL, [parameter(Mandatory = $true)] [object] $Type, [parameter(Mandatory = $false)] [object] $Weight, [parameter()] [DeletionPolicy] $DeletionPolicy, [parameter()] [UpdateReplacePolicy] $UpdateReplacePolicy, [parameter(Mandatory = $false)] [string[]] $DependsOn, [parameter(Mandatory = $false)] [VSJson] $Metadata, [parameter(Mandatory = $false)] [UpdatePolicy] $UpdatePolicy, [parameter(Mandatory = $false)] [string] $Condition ) Process { $obj = [Route53RecordSet]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'New-VSRoute53RecordSet' function New-VSRoute53RecordSetGroup { <# .SYNOPSIS Adds an AWS::Route53::RecordSetGroup resource to the template. A complex type that contains an optional comment, the name and ID of the hosted zone that you want to make changes in, and values for the records that you want to create. .DESCRIPTION Adds an AWS::Route53::RecordSetGroup resource to the template. A complex type that contains an optional comment, the name and ID of the hosted zone that you want to make changes in, and values for the records that you want to create. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-route53-recordsetgroup.html .PARAMETER LogicalId The logical ID must be alphanumeric (A-Za-z0-9) and unique within the template. Use the logical name to reference the resource in other parts of the template. For example, if you want to map an Amazon Elastic Block Store volume to an Amazon EC2 instance, you reference the logical IDs to associate the block stores with the instance. .PARAMETER Comment *Optional:* Any comments you want to include about a change batch request. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-route53-recordsetgroup.html#cfn-route53-recordsetgroup-comment PrimitiveType: String UpdateType: Mutable .PARAMETER HostedZoneId The ID of the hosted zone that you want to create records in. Specify either HostedZoneName or HostedZoneId, but not both. If you have multiple hosted zones with the same domain name, you must specify the hosted zone using HostedZoneId. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-route53-recordsetgroup.html#cfn-route53-recordsetgroup-hostedzoneid PrimitiveType: String UpdateType: Immutable .PARAMETER HostedZoneName The name of the hosted zone that you want to create records in. When you create a stack using an AWS::Route53::RecordSet that specifies HostedZoneName, AWS CloudFormation attempts to find a hosted zone whose name matches the HostedZoneName. If AWS CloudFormation can't find a hosted zone with a matching domain name, or if there is more than one hosted zone with the specified domain name, AWS CloudFormation will not create the stack. Specify either HostedZoneName or HostedZoneId, but not both. If you have multiple hosted zones with the same domain name, you must specify the hosted zone using HostedZoneId. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-route53-recordsetgroup.html#cfn-route53-recordsetgroup-hostedzonename PrimitiveType: String UpdateType: Immutable .PARAMETER RecordSets A complex type that contains one RecordSet element for each record that you want to create. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-route53-recordsetgroup.html#cfn-route53-recordsetgroup-recordsets DuplicatesAllowed: False ItemType: RecordSet Type: List UpdateType: Mutable .PARAMETER DeletionPolicy With the DeletionPolicy attribute you can preserve or (in some cases) backup a resource when its stack is deleted. You specify a DeletionPolicy attribute for each resource that you want to control. If a resource has no DeletionPolicy attribute, AWS CloudFormation deletes the resource by default. To keep a resource when its stack is deleted, specify Retain for that resource. You can use retain for any resource. For example, you can retain a nested stack, S3 bucket, or EC2 instance so that you can continue to use or modify those resources after you delete their stacks. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER UpdateReplacePolicy Use the UpdateReplacePolicy attribute to retain or (in some cases) backup the existing physical instance of a resource when it is replaced during a stack update operation. When you initiate a stack update, AWS CloudFormation updates resources based on differences between what you submit and the stack's current template and parameters. If you update a resource property that requires that the resource be replaced, AWS CloudFormation recreates the resource during the update. Recreating the resource generates a new physical ID. AWS CloudFormation creates the replacement resource first, and then changes references from other dependent resources to point to the replacement resource. By default, AWS CloudFormation then deletes the old resource. Using the UpdateReplacePolicy, you can specify that AWS CloudFormation retain or (in some cases) create a snapshot of the old resource. For resources that support snapshots, such as AWS::EC2::Volume, specify Snapshot to have AWS CloudFormation create a snapshot before deleting the old resource instance. You can apply the UpdateReplacePolicy attribute to any resource. UpdateReplacePolicy is only executed if you update a resource property whose update behavior is specified as Replacement, thereby causing AWS CloudFormation to replace the old resource with a new one with a new physical ID. For example, if you update the Engine property of an AWS::RDS::DBInstance resource type, AWS CloudFormation creates a new resource and replaces the current DB instance resource with the new one. The UpdateReplacePolicy attribute would then dictate whether AWS CloudFormation deleted, retained, or created a snapshot of the old DB instance. The update behavior for each property of a resource is specified in the reference topic for that resource in the AWS Resource and Property Types Reference. For more information on resource update behavior, see Update Behaviors of Stack Resources. The UpdateReplacePolicy attribute applies to stack updates you perform directly, as well as stack updates performed using change sets. Note Resources that are retained continue to exist and continue to incur applicable charges until you delete those resources. Snapshots that are created with this policy continue to exist and continue to incur applicable charges until you delete those snapshots. UpdateReplacePolicy retains the old physical resource or snapshot, but removes it from AWS CloudFormation's scope. UpdateReplacePolicy differs from the DeletionPolicy attribute in that it only applies to resources replaced during stack updates. Use DeletionPolicy for resources deleted when a stack is deleted, or when the resource definition itself is deleted from the template as part of a stack update. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER DependsOn With the DependsOn attribute you can specify that the creation of a specific resource follows another. When you add a DependsOn attribute to a resource, that resource is created only after the creation of the resource specified in the DependsOn attribute. This parameter takes a string or list of strings representing Logical IDs of resources that must be created prior to this resource being created. .PARAMETER Metadata The Metadata attribute enables you to associate structured data with a resource. By adding a Metadata attribute to a resource, you can add data in JSON or YAML to the resource declaration. In addition, you can use intrinsic functions (such as GetAtt and Ref), parameters, and pseudo parameters within the Metadata attribute to add those interpreted values. This will be returned when describing the resource using AWS CLI. .PARAMETER UpdatePolicy Use the UpdatePolicy attribute to specify how AWS CloudFormation handles updates to the AWS::AutoScaling::AutoScalingGroup resource. AWS CloudFormation invokes one of three update policies depending on the type of change you make or whether a scheduled action is associated with the Auto Scaling group. You must use the "Add-UpdatePolicy" function or the [UpdatePolicy] class here. .PARAMETER Condition Logical ID of the condition that this resource needs to be true in order for this resource to be provisioned. .FUNCTIONALITY Vaporshell #> [OutputType([Route53RecordSetGroup])] [cmdletbinding()] Param( [parameter(Mandatory = $true,Position = 0)] [ValidateLogicalId()] [string] $LogicalId, [parameter(Mandatory = $false)] [object] $Comment, [parameter(Mandatory = $false)] [object] $HostedZoneId, [parameter(Mandatory = $false)] [object] $HostedZoneName, [parameter(Mandatory = $false)] [object] $RecordSets, [parameter()] [DeletionPolicy] $DeletionPolicy, [parameter()] [UpdateReplacePolicy] $UpdateReplacePolicy, [parameter(Mandatory = $false)] [string[]] $DependsOn, [parameter(Mandatory = $false)] [VSJson] $Metadata, [parameter(Mandatory = $false)] [UpdatePolicy] $UpdatePolicy, [parameter(Mandatory = $false)] [string] $Condition ) Process { $obj = [Route53RecordSetGroup]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'New-VSRoute53RecordSetGroup' |