VaporShell.NimbleStudio.psm1
|
# PSM1 Contents function Format-Json { [CmdletBinding()] Param ( [Parameter(Mandatory = $true, Position = 0, ValueFromPipeline = $true)] [String] $Json ) Begin { $cleaner = { param([String]$Line) Process{ [Regex]::Replace( $Line, "\\u(?<Value>[a-zA-Z0-9]{4})", { param($m)([char]([int]::Parse( $m.Groups['Value'].Value, [System.Globalization.NumberStyles]::HexNumber ))).ToString() } ) } } } Process { if ($PSVersionTable.PSVersion.Major -lt 6) { try { $indent = 0; $res = $Json -split '\n' | ForEach-Object { if ($_ -match '[\}\]]') { # This line contains ] or }, decrement the indentation level $indent-- } $line = (' ' * $indent * 2) + $_.TrimStart().Replace(': ', ': ') if ($_ -match '[\{\[]') { # This line contains [ or {, increment the indentation level $indent++ } $cleaner.Invoke($line) } $res -join "`n" } catch { ($Json -split '\n' | ForEach-Object {$cleaner.Invoke($_)}) -join "`n" } } else { ($Json -split '\n' | ForEach-Object {$cleaner.Invoke($_)}) -join "`n" } } } function Get-TrueCount { Param ( [parameter(Mandatory = $false,Position = 0,ValueFromPipeline = $true)] $Array ) Process { if ($array) { if ($array.Count) { $count = $array.Count } else { $count = 1 } } else { $count = 0 } } End { return $count } } function New-VSError { <# .SYNOPSIS Error generator function to use in tandem with $PSCmdlet.ThrowTerminatingError() .PARAMETER Result Allows input of an error from AWS SDK, resulting in the Exception message being parsed out. .PARAMETER String Used to create basic String message errors in the same wrapper #> [cmdletbinding(DefaultParameterSetName="Result")] param( [parameter(Position=0,ParameterSetName="Result")] $Result, [parameter(Position=0,ParameterSetName="String")] $String ) switch ($PSCmdlet.ParameterSetName) { Result { $Exception = "$($result.Exception.InnerException.Message)" } String { $Exception = "$String" } } $e = New-Object "System.Exception" $Exception $errorRecord = New-Object 'System.Management.Automation.ErrorRecord' $e, $null, ([System.Management.Automation.ErrorCategory]::InvalidOperation), $null return $errorRecord } function ResolveS3Endpoint { <# .SYNOPSIS Resolves the S3 endpoint most appropriate for each region. #> Param ( [parameter(Mandatory=$true,Position=0)] [ValidateSet("eu-west-2","ap-south-1","us-east-2","sa-east-1","us-west-1","us-west-2","eu-west-1","ap-southeast-2","ca-central-1","ap-northeast-2","us-east-1","eu-central-1","ap-southeast-1","ap-northeast-1")] [String] $Region ) $endpointMap = @{ "us-east-2" = "s3.us-east-2.amazonaws.com" "us-east-1" = "s3.amazonaws.com" "us-west-1" = "s3-us-west-1.amazonaws.com" "us-west-2" = "s3-us-west-2.amazonaws.com" "ca-central-1" = "s3.ca-central-1.amazonaws.com" "ap-south-1" = "s3.ap-south-1.amazonaws.com" "ap-northeast-2" = "s3.ap-northeast-2.amazonaws.com" "ap-southeast-1" = "s3-ap-southeast-1.amazonaws.com" "ap-southeast-2" = "s3-ap-southeast-2.amazonaws.com" "ap-northeast-1" = "s3-ap-northeast-1.amazonaws.com" "eu-central-1" = "s3.eu-central-1.amazonaws.com" "eu-west-1" = "s3-eu-west-1.amazonaws.com" "eu-west-2" = "s3.eu-west-2.amazonaws.com" "sa-east-1" = "s3-sa-east-1.amazonaws.com" } return $endpointMap[$Region] } function Add-VSNimbleStudioLaunchProfileStreamConfiguration { <# .SYNOPSIS Adds an AWS::NimbleStudio::LaunchProfile.StreamConfiguration resource property to the template. .DESCRIPTION Adds an AWS::NimbleStudio::LaunchProfile.StreamConfiguration resource property to the template. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-nimblestudio-launchprofile-streamconfiguration.html .PARAMETER MaxSessionLengthInMinutes Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-nimblestudio-launchprofile-streamconfiguration.html#cfn-nimblestudio-launchprofile-streamconfiguration-maxsessionlengthinminutes UpdateType: Mutable PrimitiveType: Double .PARAMETER ClipboardMode Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-nimblestudio-launchprofile-streamconfiguration.html#cfn-nimblestudio-launchprofile-streamconfiguration-clipboardmode UpdateType: Mutable PrimitiveType: String .PARAMETER StreamingImageIds Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-nimblestudio-launchprofile-streamconfiguration.html#cfn-nimblestudio-launchprofile-streamconfiguration-streamingimageids UpdateType: Mutable Type: List PrimitiveItemType: String .PARAMETER Ec2InstanceTypes Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-nimblestudio-launchprofile-streamconfiguration.html#cfn-nimblestudio-launchprofile-streamconfiguration-ec2instancetypes UpdateType: Mutable Type: List PrimitiveItemType: String .FUNCTIONALITY Vaporshell #> [OutputType([NimbleStudioLaunchProfileStreamConfiguration])] [cmdletbinding()] Param( [parameter(Mandatory = $false)] [object] $MaxSessionLengthInMinutes, [parameter(Mandatory = $true)] [object] $ClipboardMode, [parameter(Mandatory = $true)] $StreamingImageIds, [parameter(Mandatory = $true)] $Ec2InstanceTypes ) Process { $obj = [NimbleStudioLaunchProfileStreamConfiguration]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSNimbleStudioLaunchProfileStreamConfiguration' function Add-VSNimbleStudioStudioComponentActiveDirectoryComputerAttribute { <# .SYNOPSIS Adds an AWS::NimbleStudio::StudioComponent.ActiveDirectoryComputerAttribute resource property to the template. .DESCRIPTION Adds an AWS::NimbleStudio::StudioComponent.ActiveDirectoryComputerAttribute resource property to the template. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-nimblestudio-studiocomponent-activedirectorycomputerattribute.html .PARAMETER Value Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-nimblestudio-studiocomponent-activedirectorycomputerattribute.html#cfn-nimblestudio-studiocomponent-activedirectorycomputerattribute-value UpdateType: Mutable PrimitiveType: String .PARAMETER Name Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-nimblestudio-studiocomponent-activedirectorycomputerattribute.html#cfn-nimblestudio-studiocomponent-activedirectorycomputerattribute-name UpdateType: Mutable PrimitiveType: String .FUNCTIONALITY Vaporshell #> [OutputType([NimbleStudioStudioComponentActiveDirectoryComputerAttribute])] [cmdletbinding()] Param( [parameter(Mandatory = $false)] [object] $Value, [parameter(Mandatory = $false)] [object] $Name ) Process { $obj = [NimbleStudioStudioComponentActiveDirectoryComputerAttribute]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSNimbleStudioStudioComponentActiveDirectoryComputerAttribute' function Add-VSNimbleStudioStudioComponentActiveDirectoryConfiguration { <# .SYNOPSIS Adds an AWS::NimbleStudio::StudioComponent.ActiveDirectoryConfiguration resource property to the template. .DESCRIPTION Adds an AWS::NimbleStudio::StudioComponent.ActiveDirectoryConfiguration resource property to the template. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-nimblestudio-studiocomponent-activedirectoryconfiguration.html .PARAMETER DirectoryId Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-nimblestudio-studiocomponent-activedirectoryconfiguration.html#cfn-nimblestudio-studiocomponent-activedirectoryconfiguration-directoryid UpdateType: Mutable PrimitiveType: String .PARAMETER OrganizationalUnitDistinguishedName Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-nimblestudio-studiocomponent-activedirectoryconfiguration.html#cfn-nimblestudio-studiocomponent-activedirectoryconfiguration-organizationalunitdistinguishedname UpdateType: Mutable PrimitiveType: String .PARAMETER ComputerAttributes Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-nimblestudio-studiocomponent-activedirectoryconfiguration.html#cfn-nimblestudio-studiocomponent-activedirectoryconfiguration-computerattributes UpdateType: Mutable Type: List ItemType: ActiveDirectoryComputerAttribute .FUNCTIONALITY Vaporshell #> [OutputType([NimbleStudioStudioComponentActiveDirectoryConfiguration])] [cmdletbinding()] Param( [parameter(Mandatory = $false)] [object] $DirectoryId, [parameter(Mandatory = $false)] [object] $OrganizationalUnitDistinguishedName, [parameter(Mandatory = $false)] [object] $ComputerAttributes ) Process { $obj = [NimbleStudioStudioComponentActiveDirectoryConfiguration]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSNimbleStudioStudioComponentActiveDirectoryConfiguration' function Add-VSNimbleStudioStudioComponentComputeFarmConfiguration { <# .SYNOPSIS Adds an AWS::NimbleStudio::StudioComponent.ComputeFarmConfiguration resource property to the template. .DESCRIPTION Adds an AWS::NimbleStudio::StudioComponent.ComputeFarmConfiguration resource property to the template. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-nimblestudio-studiocomponent-computefarmconfiguration.html .PARAMETER ActiveDirectoryUser Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-nimblestudio-studiocomponent-computefarmconfiguration.html#cfn-nimblestudio-studiocomponent-computefarmconfiguration-activedirectoryuser UpdateType: Mutable PrimitiveType: String .PARAMETER Endpoint Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-nimblestudio-studiocomponent-computefarmconfiguration.html#cfn-nimblestudio-studiocomponent-computefarmconfiguration-endpoint UpdateType: Mutable PrimitiveType: String .FUNCTIONALITY Vaporshell #> [OutputType([NimbleStudioStudioComponentComputeFarmConfiguration])] [cmdletbinding()] Param( [parameter(Mandatory = $false)] [object] $ActiveDirectoryUser, [parameter(Mandatory = $false)] [object] $Endpoint ) Process { $obj = [NimbleStudioStudioComponentComputeFarmConfiguration]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSNimbleStudioStudioComponentComputeFarmConfiguration' function Add-VSNimbleStudioStudioComponentLicenseServiceConfiguration { <# .SYNOPSIS Adds an AWS::NimbleStudio::StudioComponent.LicenseServiceConfiguration resource property to the template. .DESCRIPTION Adds an AWS::NimbleStudio::StudioComponent.LicenseServiceConfiguration resource property to the template. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-nimblestudio-studiocomponent-licenseserviceconfiguration.html .PARAMETER Endpoint Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-nimblestudio-studiocomponent-licenseserviceconfiguration.html#cfn-nimblestudio-studiocomponent-licenseserviceconfiguration-endpoint UpdateType: Mutable PrimitiveType: String .FUNCTIONALITY Vaporshell #> [OutputType([NimbleStudioStudioComponentLicenseServiceConfiguration])] [cmdletbinding()] Param( [parameter(Mandatory = $false)] [object] $Endpoint ) Process { $obj = [NimbleStudioStudioComponentLicenseServiceConfiguration]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSNimbleStudioStudioComponentLicenseServiceConfiguration' function Add-VSNimbleStudioStudioComponentScriptParameterKeyValue { <# .SYNOPSIS Adds an AWS::NimbleStudio::StudioComponent.ScriptParameterKeyValue resource property to the template. .DESCRIPTION Adds an AWS::NimbleStudio::StudioComponent.ScriptParameterKeyValue resource property to the template. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-nimblestudio-studiocomponent-scriptparameterkeyvalue.html .PARAMETER Value Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-nimblestudio-studiocomponent-scriptparameterkeyvalue.html#cfn-nimblestudio-studiocomponent-scriptparameterkeyvalue-value UpdateType: Mutable PrimitiveType: String .PARAMETER Key Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-nimblestudio-studiocomponent-scriptparameterkeyvalue.html#cfn-nimblestudio-studiocomponent-scriptparameterkeyvalue-key UpdateType: Mutable PrimitiveType: String .FUNCTIONALITY Vaporshell #> [OutputType([NimbleStudioStudioComponentScriptParameterKeyValue])] [cmdletbinding()] Param( [parameter(Mandatory = $false)] [object] $Value, [parameter(Mandatory = $false)] [object] $Key ) Process { $obj = [NimbleStudioStudioComponentScriptParameterKeyValue]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSNimbleStudioStudioComponentScriptParameterKeyValue' function Add-VSNimbleStudioStudioComponentSharedFileSystemConfiguration { <# .SYNOPSIS Adds an AWS::NimbleStudio::StudioComponent.SharedFileSystemConfiguration resource property to the template. .DESCRIPTION Adds an AWS::NimbleStudio::StudioComponent.SharedFileSystemConfiguration resource property to the template. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-nimblestudio-studiocomponent-sharedfilesystemconfiguration.html .PARAMETER Endpoint Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-nimblestudio-studiocomponent-sharedfilesystemconfiguration.html#cfn-nimblestudio-studiocomponent-sharedfilesystemconfiguration-endpoint UpdateType: Mutable PrimitiveType: String .PARAMETER FileSystemId Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-nimblestudio-studiocomponent-sharedfilesystemconfiguration.html#cfn-nimblestudio-studiocomponent-sharedfilesystemconfiguration-filesystemid UpdateType: Mutable PrimitiveType: String .PARAMETER ShareName Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-nimblestudio-studiocomponent-sharedfilesystemconfiguration.html#cfn-nimblestudio-studiocomponent-sharedfilesystemconfiguration-sharename UpdateType: Mutable PrimitiveType: String .PARAMETER WindowsMountDrive Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-nimblestudio-studiocomponent-sharedfilesystemconfiguration.html#cfn-nimblestudio-studiocomponent-sharedfilesystemconfiguration-windowsmountdrive UpdateType: Mutable PrimitiveType: String .PARAMETER LinuxMountPoint Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-nimblestudio-studiocomponent-sharedfilesystemconfiguration.html#cfn-nimblestudio-studiocomponent-sharedfilesystemconfiguration-linuxmountpoint UpdateType: Mutable PrimitiveType: String .FUNCTIONALITY Vaporshell #> [OutputType([NimbleStudioStudioComponentSharedFileSystemConfiguration])] [cmdletbinding()] Param( [parameter(Mandatory = $false)] [object] $Endpoint, [parameter(Mandatory = $false)] [object] $FileSystemId, [parameter(Mandatory = $false)] [object] $ShareName, [parameter(Mandatory = $false)] [object] $WindowsMountDrive, [parameter(Mandatory = $false)] [object] $LinuxMountPoint ) Process { $obj = [NimbleStudioStudioComponentSharedFileSystemConfiguration]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSNimbleStudioStudioComponentSharedFileSystemConfiguration' function Add-VSNimbleStudioStudioComponentStudioComponentConfiguration { <# .SYNOPSIS Adds an AWS::NimbleStudio::StudioComponent.StudioComponentConfiguration resource property to the template. .DESCRIPTION Adds an AWS::NimbleStudio::StudioComponent.StudioComponentConfiguration resource property to the template. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-nimblestudio-studiocomponent-studiocomponentconfiguration.html .PARAMETER LicenseServiceConfiguration Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-nimblestudio-studiocomponent-studiocomponentconfiguration.html#cfn-nimblestudio-studiocomponent-studiocomponentconfiguration-licenseserviceconfiguration UpdateType: Mutable Type: LicenseServiceConfiguration .PARAMETER ComputeFarmConfiguration Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-nimblestudio-studiocomponent-studiocomponentconfiguration.html#cfn-nimblestudio-studiocomponent-studiocomponentconfiguration-computefarmconfiguration UpdateType: Mutable Type: ComputeFarmConfiguration .PARAMETER ActiveDirectoryConfiguration Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-nimblestudio-studiocomponent-studiocomponentconfiguration.html#cfn-nimblestudio-studiocomponent-studiocomponentconfiguration-activedirectoryconfiguration UpdateType: Mutable Type: ActiveDirectoryConfiguration .PARAMETER SharedFileSystemConfiguration Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-nimblestudio-studiocomponent-studiocomponentconfiguration.html#cfn-nimblestudio-studiocomponent-studiocomponentconfiguration-sharedfilesystemconfiguration UpdateType: Mutable Type: SharedFileSystemConfiguration .FUNCTIONALITY Vaporshell #> [OutputType([NimbleStudioStudioComponentStudioComponentConfiguration])] [cmdletbinding()] Param( [parameter(Mandatory = $false)] $LicenseServiceConfiguration, [parameter(Mandatory = $false)] $ComputeFarmConfiguration, [parameter(Mandatory = $false)] $ActiveDirectoryConfiguration, [parameter(Mandatory = $false)] $SharedFileSystemConfiguration ) Process { $obj = [NimbleStudioStudioComponentStudioComponentConfiguration]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSNimbleStudioStudioComponentStudioComponentConfiguration' function Add-VSNimbleStudioStudioComponentStudioComponentInitializationScript { <# .SYNOPSIS Adds an AWS::NimbleStudio::StudioComponent.StudioComponentInitializationScript resource property to the template. .DESCRIPTION Adds an AWS::NimbleStudio::StudioComponent.StudioComponentInitializationScript resource property to the template. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-nimblestudio-studiocomponent-studiocomponentinitializationscript.html .PARAMETER Script Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-nimblestudio-studiocomponent-studiocomponentinitializationscript.html#cfn-nimblestudio-studiocomponent-studiocomponentinitializationscript-script UpdateType: Mutable PrimitiveType: String .PARAMETER LaunchProfileProtocolVersion Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-nimblestudio-studiocomponent-studiocomponentinitializationscript.html#cfn-nimblestudio-studiocomponent-studiocomponentinitializationscript-launchprofileprotocolversion UpdateType: Mutable PrimitiveType: String .PARAMETER Platform Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-nimblestudio-studiocomponent-studiocomponentinitializationscript.html#cfn-nimblestudio-studiocomponent-studiocomponentinitializationscript-platform UpdateType: Mutable PrimitiveType: String .PARAMETER RunContext Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-nimblestudio-studiocomponent-studiocomponentinitializationscript.html#cfn-nimblestudio-studiocomponent-studiocomponentinitializationscript-runcontext UpdateType: Mutable PrimitiveType: String .FUNCTIONALITY Vaporshell #> [OutputType([NimbleStudioStudioComponentStudioComponentInitializationScript])] [cmdletbinding()] Param( [parameter(Mandatory = $false)] [object] $Script, [parameter(Mandatory = $false)] [object] $LaunchProfileProtocolVersion, [parameter(Mandatory = $false)] [object] $Platform, [parameter(Mandatory = $false)] [object] $RunContext ) Process { $obj = [NimbleStudioStudioComponentStudioComponentInitializationScript]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSNimbleStudioStudioComponentStudioComponentInitializationScript' function Add-VSNimbleStudioStudioStudioEncryptionConfiguration { <# .SYNOPSIS Adds an AWS::NimbleStudio::Studio.StudioEncryptionConfiguration resource property to the template. .DESCRIPTION Adds an AWS::NimbleStudio::Studio.StudioEncryptionConfiguration resource property to the template. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-nimblestudio-studio-studioencryptionconfiguration.html .PARAMETER KeyType Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-nimblestudio-studio-studioencryptionconfiguration.html#cfn-nimblestudio-studio-studioencryptionconfiguration-keytype UpdateType: Mutable PrimitiveType: String .PARAMETER KeyArn Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-nimblestudio-studio-studioencryptionconfiguration.html#cfn-nimblestudio-studio-studioencryptionconfiguration-keyarn UpdateType: Mutable PrimitiveType: String .FUNCTIONALITY Vaporshell #> [OutputType([NimbleStudioStudioStudioEncryptionConfiguration])] [cmdletbinding()] Param( [parameter(Mandatory = $true)] [object] $KeyType, [parameter(Mandatory = $false)] [object] $KeyArn ) Process { $obj = [NimbleStudioStudioStudioEncryptionConfiguration]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSNimbleStudioStudioStudioEncryptionConfiguration' function New-VSNimbleStudioLaunchProfile { <# .SYNOPSIS Adds an AWS::NimbleStudio::LaunchProfile resource to the template. .DESCRIPTION Adds an AWS::NimbleStudio::LaunchProfile resource to the template. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-nimblestudio-launchprofile.html .PARAMETER LogicalId The logical ID must be alphanumeric (A-Za-z0-9) and unique within the template. Use the logical name to reference the resource in other parts of the template. For example, if you want to map an Amazon Elastic Block Store volume to an Amazon EC2 instance, you reference the logical IDs to associate the block stores with the instance. .PARAMETER Description Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-nimblestudio-launchprofile.html#cfn-nimblestudio-launchprofile-description UpdateType: Mutable PrimitiveType: String .PARAMETER Ec2SubnetIds Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-nimblestudio-launchprofile.html#cfn-nimblestudio-launchprofile-ec2subnetids UpdateType: Immutable Type: List PrimitiveItemType: String .PARAMETER LaunchProfileProtocolVersions Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-nimblestudio-launchprofile.html#cfn-nimblestudio-launchprofile-launchprofileprotocolversions UpdateType: Mutable Type: List PrimitiveItemType: String .PARAMETER Name Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-nimblestudio-launchprofile.html#cfn-nimblestudio-launchprofile-name UpdateType: Mutable PrimitiveType: String .PARAMETER StreamConfiguration Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-nimblestudio-launchprofile.html#cfn-nimblestudio-launchprofile-streamconfiguration UpdateType: Mutable Type: StreamConfiguration .PARAMETER StudioComponentIds Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-nimblestudio-launchprofile.html#cfn-nimblestudio-launchprofile-studiocomponentids UpdateType: Mutable Type: List PrimitiveItemType: String .PARAMETER StudioId Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-nimblestudio-launchprofile.html#cfn-nimblestudio-launchprofile-studioid UpdateType: Immutable PrimitiveType: String .PARAMETER Tags Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-nimblestudio-launchprofile.html#cfn-nimblestudio-launchprofile-tags UpdateType: Immutable Type: Map PrimitiveItemType: String .PARAMETER DeletionPolicy With the DeletionPolicy attribute you can preserve or (in some cases) backup a resource when its stack is deleted. You specify a DeletionPolicy attribute for each resource that you want to control. If a resource has no DeletionPolicy attribute, AWS CloudFormation deletes the resource by default. To keep a resource when its stack is deleted, specify Retain for that resource. You can use retain for any resource. For example, you can retain a nested stack, S3 bucket, or EC2 instance so that you can continue to use or modify those resources after you delete their stacks. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER UpdateReplacePolicy Use the UpdateReplacePolicy attribute to retain or (in some cases) backup the existing physical instance of a resource when it is replaced during a stack update operation. When you initiate a stack update, AWS CloudFormation updates resources based on differences between what you submit and the stack's current template and parameters. If you update a resource property that requires that the resource be replaced, AWS CloudFormation recreates the resource during the update. Recreating the resource generates a new physical ID. AWS CloudFormation creates the replacement resource first, and then changes references from other dependent resources to point to the replacement resource. By default, AWS CloudFormation then deletes the old resource. Using the UpdateReplacePolicy, you can specify that AWS CloudFormation retain or (in some cases) create a snapshot of the old resource. For resources that support snapshots, such as AWS::EC2::Volume, specify Snapshot to have AWS CloudFormation create a snapshot before deleting the old resource instance. You can apply the UpdateReplacePolicy attribute to any resource. UpdateReplacePolicy is only executed if you update a resource property whose update behavior is specified as Replacement, thereby causing AWS CloudFormation to replace the old resource with a new one with a new physical ID. For example, if you update the Engine property of an AWS::RDS::DBInstance resource type, AWS CloudFormation creates a new resource and replaces the current DB instance resource with the new one. The UpdateReplacePolicy attribute would then dictate whether AWS CloudFormation deleted, retained, or created a snapshot of the old DB instance. The update behavior for each property of a resource is specified in the reference topic for that resource in the AWS Resource and Property Types Reference. For more information on resource update behavior, see Update Behaviors of Stack Resources. The UpdateReplacePolicy attribute applies to stack updates you perform directly, as well as stack updates performed using change sets. Note Resources that are retained continue to exist and continue to incur applicable charges until you delete those resources. Snapshots that are created with this policy continue to exist and continue to incur applicable charges until you delete those snapshots. UpdateReplacePolicy retains the old physical resource or snapshot, but removes it from AWS CloudFormation's scope. UpdateReplacePolicy differs from the DeletionPolicy attribute in that it only applies to resources replaced during stack updates. Use DeletionPolicy for resources deleted when a stack is deleted, or when the resource definition itself is deleted from the template as part of a stack update. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER DependsOn With the DependsOn attribute you can specify that the creation of a specific resource follows another. When you add a DependsOn attribute to a resource, that resource is created only after the creation of the resource specified in the DependsOn attribute. This parameter takes a string or list of strings representing Logical IDs of resources that must be created prior to this resource being created. .PARAMETER Metadata The Metadata attribute enables you to associate structured data with a resource. By adding a Metadata attribute to a resource, you can add data in JSON or YAML to the resource declaration. In addition, you can use intrinsic functions (such as GetAtt and Ref), parameters, and pseudo parameters within the Metadata attribute to add those interpreted values. This will be returned when describing the resource using AWS CLI. .PARAMETER UpdatePolicy Use the UpdatePolicy attribute to specify how AWS CloudFormation handles updates to the AWS::AutoScaling::AutoScalingGroup resource. AWS CloudFormation invokes one of three update policies depending on the type of change you make or whether a scheduled action is associated with the Auto Scaling group. You must use the "Add-UpdatePolicy" function or the [UpdatePolicy] class here. .PARAMETER Condition Logical ID of the condition that this resource needs to be true in order for this resource to be provisioned. .FUNCTIONALITY Vaporshell #> [OutputType([NimbleStudioLaunchProfile])] [cmdletbinding()] Param( [parameter(Mandatory = $true,Position = 0)] [ValidateLogicalId()] [string] $LogicalId, [parameter(Mandatory = $false)] [object] $Description, [parameter(Mandatory = $true)] $Ec2SubnetIds, [parameter(Mandatory = $true)] $LaunchProfileProtocolVersions, [parameter(Mandatory = $true)] [object] $Name, [parameter(Mandatory = $true)] $StreamConfiguration, [parameter(Mandatory = $true)] $StudioComponentIds, [parameter(Mandatory = $true)] [object] $StudioId, [parameter(Mandatory = $false)] [IDictionary] $Tags, [parameter()] [DeletionPolicy] $DeletionPolicy, [parameter()] [UpdateReplacePolicy] $UpdateReplacePolicy, [parameter(Mandatory = $false)] [string[]] $DependsOn, [parameter(Mandatory = $false)] [VSJson] $Metadata, [parameter(Mandatory = $false)] [UpdatePolicy] $UpdatePolicy, [parameter(Mandatory = $false)] [string] $Condition ) Process { $obj = [NimbleStudioLaunchProfile]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'New-VSNimbleStudioLaunchProfile' function New-VSNimbleStudioStreamingImage { <# .SYNOPSIS Adds an AWS::NimbleStudio::StreamingImage resource to the template. .DESCRIPTION Adds an AWS::NimbleStudio::StreamingImage resource to the template. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-nimblestudio-streamingimage.html .PARAMETER LogicalId The logical ID must be alphanumeric (A-Za-z0-9) and unique within the template. Use the logical name to reference the resource in other parts of the template. For example, if you want to map an Amazon Elastic Block Store volume to an Amazon EC2 instance, you reference the logical IDs to associate the block stores with the instance. .PARAMETER Description Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-nimblestudio-streamingimage.html#cfn-nimblestudio-streamingimage-description UpdateType: Mutable PrimitiveType: String .PARAMETER Ec2ImageId Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-nimblestudio-streamingimage.html#cfn-nimblestudio-streamingimage-ec2imageid UpdateType: Immutable PrimitiveType: String .PARAMETER Name Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-nimblestudio-streamingimage.html#cfn-nimblestudio-streamingimage-name UpdateType: Mutable PrimitiveType: String .PARAMETER StudioId Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-nimblestudio-streamingimage.html#cfn-nimblestudio-streamingimage-studioid UpdateType: Immutable PrimitiveType: String .PARAMETER Tags Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-nimblestudio-streamingimage.html#cfn-nimblestudio-streamingimage-tags UpdateType: Immutable Type: Map PrimitiveItemType: String .PARAMETER DeletionPolicy With the DeletionPolicy attribute you can preserve or (in some cases) backup a resource when its stack is deleted. You specify a DeletionPolicy attribute for each resource that you want to control. If a resource has no DeletionPolicy attribute, AWS CloudFormation deletes the resource by default. To keep a resource when its stack is deleted, specify Retain for that resource. You can use retain for any resource. For example, you can retain a nested stack, S3 bucket, or EC2 instance so that you can continue to use or modify those resources after you delete their stacks. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER UpdateReplacePolicy Use the UpdateReplacePolicy attribute to retain or (in some cases) backup the existing physical instance of a resource when it is replaced during a stack update operation. When you initiate a stack update, AWS CloudFormation updates resources based on differences between what you submit and the stack's current template and parameters. If you update a resource property that requires that the resource be replaced, AWS CloudFormation recreates the resource during the update. Recreating the resource generates a new physical ID. AWS CloudFormation creates the replacement resource first, and then changes references from other dependent resources to point to the replacement resource. By default, AWS CloudFormation then deletes the old resource. Using the UpdateReplacePolicy, you can specify that AWS CloudFormation retain or (in some cases) create a snapshot of the old resource. For resources that support snapshots, such as AWS::EC2::Volume, specify Snapshot to have AWS CloudFormation create a snapshot before deleting the old resource instance. You can apply the UpdateReplacePolicy attribute to any resource. UpdateReplacePolicy is only executed if you update a resource property whose update behavior is specified as Replacement, thereby causing AWS CloudFormation to replace the old resource with a new one with a new physical ID. For example, if you update the Engine property of an AWS::RDS::DBInstance resource type, AWS CloudFormation creates a new resource and replaces the current DB instance resource with the new one. The UpdateReplacePolicy attribute would then dictate whether AWS CloudFormation deleted, retained, or created a snapshot of the old DB instance. The update behavior for each property of a resource is specified in the reference topic for that resource in the AWS Resource and Property Types Reference. For more information on resource update behavior, see Update Behaviors of Stack Resources. The UpdateReplacePolicy attribute applies to stack updates you perform directly, as well as stack updates performed using change sets. Note Resources that are retained continue to exist and continue to incur applicable charges until you delete those resources. Snapshots that are created with this policy continue to exist and continue to incur applicable charges until you delete those snapshots. UpdateReplacePolicy retains the old physical resource or snapshot, but removes it from AWS CloudFormation's scope. UpdateReplacePolicy differs from the DeletionPolicy attribute in that it only applies to resources replaced during stack updates. Use DeletionPolicy for resources deleted when a stack is deleted, or when the resource definition itself is deleted from the template as part of a stack update. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER DependsOn With the DependsOn attribute you can specify that the creation of a specific resource follows another. When you add a DependsOn attribute to a resource, that resource is created only after the creation of the resource specified in the DependsOn attribute. This parameter takes a string or list of strings representing Logical IDs of resources that must be created prior to this resource being created. .PARAMETER Metadata The Metadata attribute enables you to associate structured data with a resource. By adding a Metadata attribute to a resource, you can add data in JSON or YAML to the resource declaration. In addition, you can use intrinsic functions (such as GetAtt and Ref), parameters, and pseudo parameters within the Metadata attribute to add those interpreted values. This will be returned when describing the resource using AWS CLI. .PARAMETER UpdatePolicy Use the UpdatePolicy attribute to specify how AWS CloudFormation handles updates to the AWS::AutoScaling::AutoScalingGroup resource. AWS CloudFormation invokes one of three update policies depending on the type of change you make or whether a scheduled action is associated with the Auto Scaling group. You must use the "Add-UpdatePolicy" function or the [UpdatePolicy] class here. .PARAMETER Condition Logical ID of the condition that this resource needs to be true in order for this resource to be provisioned. .FUNCTIONALITY Vaporshell #> [OutputType([NimbleStudioStreamingImage])] [cmdletbinding()] Param( [parameter(Mandatory = $true,Position = 0)] [ValidateLogicalId()] [string] $LogicalId, [parameter(Mandatory = $false)] [object] $Description, [parameter(Mandatory = $true)] [object] $Ec2ImageId, [parameter(Mandatory = $true)] [object] $Name, [parameter(Mandatory = $true)] [object] $StudioId, [parameter(Mandatory = $false)] [IDictionary] $Tags, [parameter()] [DeletionPolicy] $DeletionPolicy, [parameter()] [UpdateReplacePolicy] $UpdateReplacePolicy, [parameter(Mandatory = $false)] [string[]] $DependsOn, [parameter(Mandatory = $false)] [VSJson] $Metadata, [parameter(Mandatory = $false)] [UpdatePolicy] $UpdatePolicy, [parameter(Mandatory = $false)] [string] $Condition ) Process { $obj = [NimbleStudioStreamingImage]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'New-VSNimbleStudioStreamingImage' function New-VSNimbleStudioStudio { <# .SYNOPSIS Adds an AWS::NimbleStudio::Studio resource to the template. .DESCRIPTION Adds an AWS::NimbleStudio::Studio resource to the template. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-nimblestudio-studio.html .PARAMETER LogicalId The logical ID must be alphanumeric (A-Za-z0-9) and unique within the template. Use the logical name to reference the resource in other parts of the template. For example, if you want to map an Amazon Elastic Block Store volume to an Amazon EC2 instance, you reference the logical IDs to associate the block stores with the instance. .PARAMETER AdminRoleArn Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-nimblestudio-studio.html#cfn-nimblestudio-studio-adminrolearn UpdateType: Mutable PrimitiveType: String .PARAMETER DisplayName Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-nimblestudio-studio.html#cfn-nimblestudio-studio-displayname UpdateType: Mutable PrimitiveType: String .PARAMETER StudioEncryptionConfiguration Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-nimblestudio-studio.html#cfn-nimblestudio-studio-studioencryptionconfiguration UpdateType: Mutable Type: StudioEncryptionConfiguration .PARAMETER StudioName Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-nimblestudio-studio.html#cfn-nimblestudio-studio-studioname UpdateType: Immutable PrimitiveType: String .PARAMETER Tags Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-nimblestudio-studio.html#cfn-nimblestudio-studio-tags UpdateType: Immutable Type: Map PrimitiveItemType: String .PARAMETER UserRoleArn Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-nimblestudio-studio.html#cfn-nimblestudio-studio-userrolearn UpdateType: Mutable PrimitiveType: String .PARAMETER DeletionPolicy With the DeletionPolicy attribute you can preserve or (in some cases) backup a resource when its stack is deleted. You specify a DeletionPolicy attribute for each resource that you want to control. If a resource has no DeletionPolicy attribute, AWS CloudFormation deletes the resource by default. To keep a resource when its stack is deleted, specify Retain for that resource. You can use retain for any resource. For example, you can retain a nested stack, S3 bucket, or EC2 instance so that you can continue to use or modify those resources after you delete their stacks. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER UpdateReplacePolicy Use the UpdateReplacePolicy attribute to retain or (in some cases) backup the existing physical instance of a resource when it is replaced during a stack update operation. When you initiate a stack update, AWS CloudFormation updates resources based on differences between what you submit and the stack's current template and parameters. If you update a resource property that requires that the resource be replaced, AWS CloudFormation recreates the resource during the update. Recreating the resource generates a new physical ID. AWS CloudFormation creates the replacement resource first, and then changes references from other dependent resources to point to the replacement resource. By default, AWS CloudFormation then deletes the old resource. Using the UpdateReplacePolicy, you can specify that AWS CloudFormation retain or (in some cases) create a snapshot of the old resource. For resources that support snapshots, such as AWS::EC2::Volume, specify Snapshot to have AWS CloudFormation create a snapshot before deleting the old resource instance. You can apply the UpdateReplacePolicy attribute to any resource. UpdateReplacePolicy is only executed if you update a resource property whose update behavior is specified as Replacement, thereby causing AWS CloudFormation to replace the old resource with a new one with a new physical ID. For example, if you update the Engine property of an AWS::RDS::DBInstance resource type, AWS CloudFormation creates a new resource and replaces the current DB instance resource with the new one. The UpdateReplacePolicy attribute would then dictate whether AWS CloudFormation deleted, retained, or created a snapshot of the old DB instance. The update behavior for each property of a resource is specified in the reference topic for that resource in the AWS Resource and Property Types Reference. For more information on resource update behavior, see Update Behaviors of Stack Resources. The UpdateReplacePolicy attribute applies to stack updates you perform directly, as well as stack updates performed using change sets. Note Resources that are retained continue to exist and continue to incur applicable charges until you delete those resources. Snapshots that are created with this policy continue to exist and continue to incur applicable charges until you delete those snapshots. UpdateReplacePolicy retains the old physical resource or snapshot, but removes it from AWS CloudFormation's scope. UpdateReplacePolicy differs from the DeletionPolicy attribute in that it only applies to resources replaced during stack updates. Use DeletionPolicy for resources deleted when a stack is deleted, or when the resource definition itself is deleted from the template as part of a stack update. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER DependsOn With the DependsOn attribute you can specify that the creation of a specific resource follows another. When you add a DependsOn attribute to a resource, that resource is created only after the creation of the resource specified in the DependsOn attribute. This parameter takes a string or list of strings representing Logical IDs of resources that must be created prior to this resource being created. .PARAMETER Metadata The Metadata attribute enables you to associate structured data with a resource. By adding a Metadata attribute to a resource, you can add data in JSON or YAML to the resource declaration. In addition, you can use intrinsic functions (such as GetAtt and Ref), parameters, and pseudo parameters within the Metadata attribute to add those interpreted values. This will be returned when describing the resource using AWS CLI. .PARAMETER UpdatePolicy Use the UpdatePolicy attribute to specify how AWS CloudFormation handles updates to the AWS::AutoScaling::AutoScalingGroup resource. AWS CloudFormation invokes one of three update policies depending on the type of change you make or whether a scheduled action is associated with the Auto Scaling group. You must use the "Add-UpdatePolicy" function or the [UpdatePolicy] class here. .PARAMETER Condition Logical ID of the condition that this resource needs to be true in order for this resource to be provisioned. .FUNCTIONALITY Vaporshell #> [OutputType([NimbleStudioStudio])] [cmdletbinding()] Param( [parameter(Mandatory = $true,Position = 0)] [ValidateLogicalId()] [string] $LogicalId, [parameter(Mandatory = $true)] [object] $AdminRoleArn, [parameter(Mandatory = $true)] [object] $DisplayName, [parameter(Mandatory = $false)] $StudioEncryptionConfiguration, [parameter(Mandatory = $true)] [object] $StudioName, [parameter(Mandatory = $false)] [IDictionary] $Tags, [parameter(Mandatory = $true)] [object] $UserRoleArn, [parameter()] [DeletionPolicy] $DeletionPolicy, [parameter()] [UpdateReplacePolicy] $UpdateReplacePolicy, [parameter(Mandatory = $false)] [string[]] $DependsOn, [parameter(Mandatory = $false)] [VSJson] $Metadata, [parameter(Mandatory = $false)] [UpdatePolicy] $UpdatePolicy, [parameter(Mandatory = $false)] [string] $Condition ) Process { $obj = [NimbleStudioStudio]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'New-VSNimbleStudioStudio' function New-VSNimbleStudioStudioComponent { <# .SYNOPSIS Adds an AWS::NimbleStudio::StudioComponent resource to the template. .DESCRIPTION Adds an AWS::NimbleStudio::StudioComponent resource to the template. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-nimblestudio-studiocomponent.html .PARAMETER LogicalId The logical ID must be alphanumeric (A-Za-z0-9) and unique within the template. Use the logical name to reference the resource in other parts of the template. For example, if you want to map an Amazon Elastic Block Store volume to an Amazon EC2 instance, you reference the logical IDs to associate the block stores with the instance. .PARAMETER Configuration Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-nimblestudio-studiocomponent.html#cfn-nimblestudio-studiocomponent-configuration UpdateType: Mutable Type: StudioComponentConfiguration .PARAMETER Description Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-nimblestudio-studiocomponent.html#cfn-nimblestudio-studiocomponent-description UpdateType: Mutable PrimitiveType: String .PARAMETER Ec2SecurityGroupIds Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-nimblestudio-studiocomponent.html#cfn-nimblestudio-studiocomponent-ec2securitygroupids UpdateType: Mutable Type: List PrimitiveItemType: String .PARAMETER InitializationScripts Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-nimblestudio-studiocomponent.html#cfn-nimblestudio-studiocomponent-initializationscripts UpdateType: Mutable Type: List ItemType: StudioComponentInitializationScript .PARAMETER Name Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-nimblestudio-studiocomponent.html#cfn-nimblestudio-studiocomponent-name UpdateType: Mutable PrimitiveType: String .PARAMETER ScriptParameters Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-nimblestudio-studiocomponent.html#cfn-nimblestudio-studiocomponent-scriptparameters UpdateType: Mutable Type: List ItemType: ScriptParameterKeyValue .PARAMETER StudioId Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-nimblestudio-studiocomponent.html#cfn-nimblestudio-studiocomponent-studioid UpdateType: Immutable PrimitiveType: String .PARAMETER Subtype Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-nimblestudio-studiocomponent.html#cfn-nimblestudio-studiocomponent-subtype UpdateType: Immutable PrimitiveType: String .PARAMETER Tags Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-nimblestudio-studiocomponent.html#cfn-nimblestudio-studiocomponent-tags UpdateType: Immutable Type: Map PrimitiveItemType: String .PARAMETER Type Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-nimblestudio-studiocomponent.html#cfn-nimblestudio-studiocomponent-type UpdateType: Mutable PrimitiveType: String .PARAMETER DeletionPolicy With the DeletionPolicy attribute you can preserve or (in some cases) backup a resource when its stack is deleted. You specify a DeletionPolicy attribute for each resource that you want to control. If a resource has no DeletionPolicy attribute, AWS CloudFormation deletes the resource by default. To keep a resource when its stack is deleted, specify Retain for that resource. You can use retain for any resource. For example, you can retain a nested stack, S3 bucket, or EC2 instance so that you can continue to use or modify those resources after you delete their stacks. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER UpdateReplacePolicy Use the UpdateReplacePolicy attribute to retain or (in some cases) backup the existing physical instance of a resource when it is replaced during a stack update operation. When you initiate a stack update, AWS CloudFormation updates resources based on differences between what you submit and the stack's current template and parameters. If you update a resource property that requires that the resource be replaced, AWS CloudFormation recreates the resource during the update. Recreating the resource generates a new physical ID. AWS CloudFormation creates the replacement resource first, and then changes references from other dependent resources to point to the replacement resource. By default, AWS CloudFormation then deletes the old resource. Using the UpdateReplacePolicy, you can specify that AWS CloudFormation retain or (in some cases) create a snapshot of the old resource. For resources that support snapshots, such as AWS::EC2::Volume, specify Snapshot to have AWS CloudFormation create a snapshot before deleting the old resource instance. You can apply the UpdateReplacePolicy attribute to any resource. UpdateReplacePolicy is only executed if you update a resource property whose update behavior is specified as Replacement, thereby causing AWS CloudFormation to replace the old resource with a new one with a new physical ID. For example, if you update the Engine property of an AWS::RDS::DBInstance resource type, AWS CloudFormation creates a new resource and replaces the current DB instance resource with the new one. The UpdateReplacePolicy attribute would then dictate whether AWS CloudFormation deleted, retained, or created a snapshot of the old DB instance. The update behavior for each property of a resource is specified in the reference topic for that resource in the AWS Resource and Property Types Reference. For more information on resource update behavior, see Update Behaviors of Stack Resources. The UpdateReplacePolicy attribute applies to stack updates you perform directly, as well as stack updates performed using change sets. Note Resources that are retained continue to exist and continue to incur applicable charges until you delete those resources. Snapshots that are created with this policy continue to exist and continue to incur applicable charges until you delete those snapshots. UpdateReplacePolicy retains the old physical resource or snapshot, but removes it from AWS CloudFormation's scope. UpdateReplacePolicy differs from the DeletionPolicy attribute in that it only applies to resources replaced during stack updates. Use DeletionPolicy for resources deleted when a stack is deleted, or when the resource definition itself is deleted from the template as part of a stack update. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER DependsOn With the DependsOn attribute you can specify that the creation of a specific resource follows another. When you add a DependsOn attribute to a resource, that resource is created only after the creation of the resource specified in the DependsOn attribute. This parameter takes a string or list of strings representing Logical IDs of resources that must be created prior to this resource being created. .PARAMETER Metadata The Metadata attribute enables you to associate structured data with a resource. By adding a Metadata attribute to a resource, you can add data in JSON or YAML to the resource declaration. In addition, you can use intrinsic functions (such as GetAtt and Ref), parameters, and pseudo parameters within the Metadata attribute to add those interpreted values. This will be returned when describing the resource using AWS CLI. .PARAMETER UpdatePolicy Use the UpdatePolicy attribute to specify how AWS CloudFormation handles updates to the AWS::AutoScaling::AutoScalingGroup resource. AWS CloudFormation invokes one of three update policies depending on the type of change you make or whether a scheduled action is associated with the Auto Scaling group. You must use the "Add-UpdatePolicy" function or the [UpdatePolicy] class here. .PARAMETER Condition Logical ID of the condition that this resource needs to be true in order for this resource to be provisioned. .FUNCTIONALITY Vaporshell #> [OutputType([NimbleStudioStudioComponent])] [cmdletbinding()] Param( [parameter(Mandatory = $true,Position = 0)] [ValidateLogicalId()] [string] $LogicalId, [parameter(Mandatory = $false)] $Configuration, [parameter(Mandatory = $false)] [object] $Description, [parameter(Mandatory = $false)] $Ec2SecurityGroupIds, [parameter(Mandatory = $false)] [object] $InitializationScripts, [parameter(Mandatory = $true)] [object] $Name, [parameter(Mandatory = $false)] [object] $ScriptParameters, [parameter(Mandatory = $true)] [object] $StudioId, [parameter(Mandatory = $false)] [object] $Subtype, [parameter(Mandatory = $false)] [IDictionary] $Tags, [parameter(Mandatory = $true)] [object] $Type, [parameter()] [DeletionPolicy] $DeletionPolicy, [parameter()] [UpdateReplacePolicy] $UpdateReplacePolicy, [parameter(Mandatory = $false)] [string[]] $DependsOn, [parameter(Mandatory = $false)] [VSJson] $Metadata, [parameter(Mandatory = $false)] [UpdatePolicy] $UpdatePolicy, [parameter(Mandatory = $false)] [string] $Condition ) Process { $obj = [NimbleStudioStudioComponent]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'New-VSNimbleStudioStudioComponent' |