VaporShell.Lightsail.psm1
|
# PSM1 Contents function Format-Json { [CmdletBinding()] Param ( [Parameter(Mandatory = $true, Position = 0, ValueFromPipeline = $true)] [String] $Json ) Begin { $cleaner = { param([String]$Line) Process{ [Regex]::Replace( $Line, "\\u(?<Value>[a-zA-Z0-9]{4})", { param($m)([char]([int]::Parse( $m.Groups['Value'].Value, [System.Globalization.NumberStyles]::HexNumber ))).ToString() } ) } } } Process { if ($PSVersionTable.PSVersion.Major -lt 6) { try { $indent = 0; $res = $Json -split '\n' | ForEach-Object { if ($_ -match '[\}\]]') { # This line contains ] or }, decrement the indentation level $indent-- } $line = (' ' * $indent * 2) + $_.TrimStart().Replace(': ', ': ') if ($_ -match '[\{\[]') { # This line contains [ or {, increment the indentation level $indent++ } $cleaner.Invoke($line) } $res -join "`n" } catch { ($Json -split '\n' | ForEach-Object {$cleaner.Invoke($_)}) -join "`n" } } else { ($Json -split '\n' | ForEach-Object {$cleaner.Invoke($_)}) -join "`n" } } } function Get-TrueCount { Param ( [parameter(Mandatory = $false,Position = 0,ValueFromPipeline = $true)] $Array ) Process { if ($array) { if ($array.Count) { $count = $array.Count } else { $count = 1 } } else { $count = 0 } } End { return $count } } function New-VSError { <# .SYNOPSIS Error generator function to use in tandem with $PSCmdlet.ThrowTerminatingError() .PARAMETER Result Allows input of an error from AWS SDK, resulting in the Exception message being parsed out. .PARAMETER String Used to create basic String message errors in the same wrapper #> [cmdletbinding(DefaultParameterSetName="Result")] param( [parameter(Position=0,ParameterSetName="Result")] $Result, [parameter(Position=0,ParameterSetName="String")] $String ) switch ($PSCmdlet.ParameterSetName) { Result { $Exception = "$($result.Exception.InnerException.Message)" } String { $Exception = "$String" } } $e = New-Object "System.Exception" $Exception $errorRecord = New-Object 'System.Management.Automation.ErrorRecord' $e, $null, ([System.Management.Automation.ErrorCategory]::InvalidOperation), $null return $errorRecord } function ResolveS3Endpoint { <# .SYNOPSIS Resolves the S3 endpoint most appropriate for each region. #> Param ( [parameter(Mandatory=$true,Position=0)] [ValidateSet("eu-west-2","ap-south-1","us-east-2","sa-east-1","us-west-1","us-west-2","eu-west-1","ap-southeast-2","ca-central-1","ap-northeast-2","us-east-1","eu-central-1","ap-southeast-1","ap-northeast-1")] [String] $Region ) $endpointMap = @{ "us-east-2" = "s3.us-east-2.amazonaws.com" "us-east-1" = "s3.amazonaws.com" "us-west-1" = "s3-us-west-1.amazonaws.com" "us-west-2" = "s3-us-west-2.amazonaws.com" "ca-central-1" = "s3.ca-central-1.amazonaws.com" "ap-south-1" = "s3.ap-south-1.amazonaws.com" "ap-northeast-2" = "s3.ap-northeast-2.amazonaws.com" "ap-southeast-1" = "s3-ap-southeast-1.amazonaws.com" "ap-southeast-2" = "s3-ap-southeast-2.amazonaws.com" "ap-northeast-1" = "s3-ap-northeast-1.amazonaws.com" "eu-central-1" = "s3.eu-central-1.amazonaws.com" "eu-west-1" = "s3-eu-west-1.amazonaws.com" "eu-west-2" = "s3.eu-west-2.amazonaws.com" "sa-east-1" = "s3-sa-east-1.amazonaws.com" } return $endpointMap[$Region] } function Add-VSLightsailBucketAccessRules { <# .SYNOPSIS Adds an AWS::Lightsail::Bucket.AccessRules resource property to the template. .DESCRIPTION Adds an AWS::Lightsail::Bucket.AccessRules resource property to the template. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lightsail-bucket-accessrules.html .PARAMETER GetObject Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lightsail-bucket-accessrules.html#cfn-lightsail-bucket-accessrules-getobject UpdateType: Mutable PrimitiveType: String .PARAMETER AllowPublicOverrides Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lightsail-bucket-accessrules.html#cfn-lightsail-bucket-accessrules-allowpublicoverrides UpdateType: Mutable PrimitiveType: Boolean .FUNCTIONALITY Vaporshell #> [OutputType([LightsailBucketAccessRules])] [cmdletbinding()] Param( [parameter(Mandatory = $false)] [object] $GetObject, [parameter(Mandatory = $false)] [object] $AllowPublicOverrides ) Process { $obj = [LightsailBucketAccessRules]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSLightsailBucketAccessRules' function Add-VSLightsailContainerContainer { <# .SYNOPSIS Adds an AWS::Lightsail::Container.Container resource property to the template. .DESCRIPTION Adds an AWS::Lightsail::Container.Container resource property to the template. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lightsail-container-container.html .PARAMETER ContainerName Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lightsail-container-container.html#cfn-lightsail-container-container-containername UpdateType: Mutable PrimitiveType: String .PARAMETER Command Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lightsail-container-container.html#cfn-lightsail-container-container-command UpdateType: Mutable Type: List PrimitiveItemType: String DuplicatesAllowed: False .PARAMETER Environment Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lightsail-container-container.html#cfn-lightsail-container-container-environment UpdateType: Mutable Type: List ItemType: EnvironmentVariable DuplicatesAllowed: False .PARAMETER Image Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lightsail-container-container.html#cfn-lightsail-container-container-image UpdateType: Mutable PrimitiveType: String .PARAMETER Ports Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lightsail-container-container.html#cfn-lightsail-container-container-ports UpdateType: Mutable Type: List ItemType: PortInfo DuplicatesAllowed: False .FUNCTIONALITY Vaporshell #> [OutputType([LightsailContainerContainer])] [cmdletbinding()] Param( [parameter(Mandatory = $false)] [object] $ContainerName, [parameter(Mandatory = $false)] $Command, [parameter(Mandatory = $false)] [object] $Environment, [parameter(Mandatory = $false)] [object] $Image, [parameter(Mandatory = $false)] [object] $Ports ) Process { $obj = [LightsailContainerContainer]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSLightsailContainerContainer' function Add-VSLightsailContainerContainerServiceDeployment { <# .SYNOPSIS Adds an AWS::Lightsail::Container.ContainerServiceDeployment resource property to the template. .DESCRIPTION Adds an AWS::Lightsail::Container.ContainerServiceDeployment resource property to the template. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lightsail-container-containerservicedeployment.html .PARAMETER Containers Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lightsail-container-containerservicedeployment.html#cfn-lightsail-container-containerservicedeployment-containers UpdateType: Mutable Type: List ItemType: Container DuplicatesAllowed: False .PARAMETER PublicEndpoint Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lightsail-container-containerservicedeployment.html#cfn-lightsail-container-containerservicedeployment-publicendpoint UpdateType: Mutable Type: PublicEndpoint .FUNCTIONALITY Vaporshell #> [OutputType([LightsailContainerContainerServiceDeployment])] [cmdletbinding()] Param( [parameter(Mandatory = $false)] [object] $Containers, [parameter(Mandatory = $false)] $PublicEndpoint ) Process { $obj = [LightsailContainerContainerServiceDeployment]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSLightsailContainerContainerServiceDeployment' function Add-VSLightsailContainerEnvironmentVariable { <# .SYNOPSIS Adds an AWS::Lightsail::Container.EnvironmentVariable resource property to the template. .DESCRIPTION Adds an AWS::Lightsail::Container.EnvironmentVariable resource property to the template. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lightsail-container-environmentvariable.html .PARAMETER Variable Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lightsail-container-environmentvariable.html#cfn-lightsail-container-environmentvariable-variable UpdateType: Mutable PrimitiveType: String .PARAMETER Value Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lightsail-container-environmentvariable.html#cfn-lightsail-container-environmentvariable-value UpdateType: Mutable PrimitiveType: String .FUNCTIONALITY Vaporshell #> [OutputType([LightsailContainerEnvironmentVariable])] [cmdletbinding()] Param( [parameter(Mandatory = $false)] [object] $Variable, [parameter(Mandatory = $false)] [object] $Value ) Process { $obj = [LightsailContainerEnvironmentVariable]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSLightsailContainerEnvironmentVariable' function Add-VSLightsailContainerHealthCheckConfig { <# .SYNOPSIS Adds an AWS::Lightsail::Container.HealthCheckConfig resource property to the template. .DESCRIPTION Adds an AWS::Lightsail::Container.HealthCheckConfig resource property to the template. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lightsail-container-healthcheckconfig.html .PARAMETER HealthyThreshold Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lightsail-container-healthcheckconfig.html#cfn-lightsail-container-healthcheckconfig-healthythreshold UpdateType: Mutable PrimitiveType: Integer .PARAMETER IntervalSeconds Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lightsail-container-healthcheckconfig.html#cfn-lightsail-container-healthcheckconfig-intervalseconds UpdateType: Mutable PrimitiveType: Integer .PARAMETER Path Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lightsail-container-healthcheckconfig.html#cfn-lightsail-container-healthcheckconfig-path UpdateType: Mutable PrimitiveType: String .PARAMETER SuccessCodes Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lightsail-container-healthcheckconfig.html#cfn-lightsail-container-healthcheckconfig-successcodes UpdateType: Mutable PrimitiveType: String .PARAMETER TimeoutSeconds Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lightsail-container-healthcheckconfig.html#cfn-lightsail-container-healthcheckconfig-timeoutseconds UpdateType: Mutable PrimitiveType: Integer .PARAMETER UnhealthyThreshold Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lightsail-container-healthcheckconfig.html#cfn-lightsail-container-healthcheckconfig-unhealthythreshold UpdateType: Mutable PrimitiveType: Integer .FUNCTIONALITY Vaporshell #> [OutputType([LightsailContainerHealthCheckConfig])] [cmdletbinding()] Param( [parameter(Mandatory = $false)] [object] $HealthyThreshold, [parameter(Mandatory = $false)] [object] $IntervalSeconds, [parameter(Mandatory = $false)] [object] $Path, [parameter(Mandatory = $false)] [object] $SuccessCodes, [parameter(Mandatory = $false)] [object] $TimeoutSeconds, [parameter(Mandatory = $false)] [object] $UnhealthyThreshold ) Process { $obj = [LightsailContainerHealthCheckConfig]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSLightsailContainerHealthCheckConfig' function Add-VSLightsailContainerPortInfo { <# .SYNOPSIS Adds an AWS::Lightsail::Container.PortInfo resource property to the template. .DESCRIPTION Adds an AWS::Lightsail::Container.PortInfo resource property to the template. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lightsail-container-portinfo.html .PARAMETER Port Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lightsail-container-portinfo.html#cfn-lightsail-container-portinfo-port UpdateType: Mutable PrimitiveType: String .PARAMETER Protocol Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lightsail-container-portinfo.html#cfn-lightsail-container-portinfo-protocol UpdateType: Mutable PrimitiveType: String .FUNCTIONALITY Vaporshell #> [OutputType([LightsailContainerPortInfo])] [cmdletbinding()] Param( [parameter(Mandatory = $false)] [object] $Port, [parameter(Mandatory = $false)] [object] $Protocol ) Process { $obj = [LightsailContainerPortInfo]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSLightsailContainerPortInfo' function Add-VSLightsailContainerPublicDomainName { <# .SYNOPSIS Adds an AWS::Lightsail::Container.PublicDomainName resource property to the template. .DESCRIPTION Adds an AWS::Lightsail::Container.PublicDomainName resource property to the template. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lightsail-container-publicdomainname.html .PARAMETER CertificateName Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lightsail-container-publicdomainname.html#cfn-lightsail-container-publicdomainname-certificatename UpdateType: Mutable PrimitiveType: String .PARAMETER DomainNames Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lightsail-container-publicdomainname.html#cfn-lightsail-container-publicdomainname-domainnames UpdateType: Mutable Type: List PrimitiveItemType: String DuplicatesAllowed: False .FUNCTIONALITY Vaporshell #> [OutputType([LightsailContainerPublicDomainName])] [cmdletbinding()] Param( [parameter(Mandatory = $false)] [object] $CertificateName, [parameter(Mandatory = $false)] $DomainNames ) Process { $obj = [LightsailContainerPublicDomainName]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSLightsailContainerPublicDomainName' function Add-VSLightsailContainerPublicEndpoint { <# .SYNOPSIS Adds an AWS::Lightsail::Container.PublicEndpoint resource property to the template. .DESCRIPTION Adds an AWS::Lightsail::Container.PublicEndpoint resource property to the template. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lightsail-container-publicendpoint.html .PARAMETER ContainerName Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lightsail-container-publicendpoint.html#cfn-lightsail-container-publicendpoint-containername UpdateType: Mutable PrimitiveType: String .PARAMETER ContainerPort Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lightsail-container-publicendpoint.html#cfn-lightsail-container-publicendpoint-containerport UpdateType: Mutable PrimitiveType: Integer .PARAMETER HealthCheckConfig Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lightsail-container-publicendpoint.html#cfn-lightsail-container-publicendpoint-healthcheckconfig UpdateType: Mutable Type: HealthCheckConfig .FUNCTIONALITY Vaporshell #> [OutputType([LightsailContainerPublicEndpoint])] [cmdletbinding()] Param( [parameter(Mandatory = $false)] [object] $ContainerName, [parameter(Mandatory = $false)] [object] $ContainerPort, [parameter(Mandatory = $false)] $HealthCheckConfig ) Process { $obj = [LightsailContainerPublicEndpoint]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSLightsailContainerPublicEndpoint' function Add-VSLightsailDatabaseRelationalDatabaseParameter { <# .SYNOPSIS Adds an AWS::Lightsail::Database.RelationalDatabaseParameter resource property to the template. .DESCRIPTION Adds an AWS::Lightsail::Database.RelationalDatabaseParameter resource property to the template. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lightsail-database-relationaldatabaseparameter.html .PARAMETER AllowedValues Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lightsail-database-relationaldatabaseparameter.html#cfn-lightsail-database-relationaldatabaseparameter-allowedvalues UpdateType: Mutable PrimitiveType: String .PARAMETER ApplyMethod Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lightsail-database-relationaldatabaseparameter.html#cfn-lightsail-database-relationaldatabaseparameter-applymethod UpdateType: Mutable PrimitiveType: String .PARAMETER ApplyType Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lightsail-database-relationaldatabaseparameter.html#cfn-lightsail-database-relationaldatabaseparameter-applytype UpdateType: Mutable PrimitiveType: String .PARAMETER DataType Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lightsail-database-relationaldatabaseparameter.html#cfn-lightsail-database-relationaldatabaseparameter-datatype UpdateType: Mutable PrimitiveType: String .PARAMETER Description Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lightsail-database-relationaldatabaseparameter.html#cfn-lightsail-database-relationaldatabaseparameter-description UpdateType: Mutable PrimitiveType: String .PARAMETER IsModifiable Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lightsail-database-relationaldatabaseparameter.html#cfn-lightsail-database-relationaldatabaseparameter-ismodifiable UpdateType: Mutable PrimitiveType: Boolean .PARAMETER ParameterName Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lightsail-database-relationaldatabaseparameter.html#cfn-lightsail-database-relationaldatabaseparameter-parametername UpdateType: Mutable PrimitiveType: String .PARAMETER ParameterValue Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lightsail-database-relationaldatabaseparameter.html#cfn-lightsail-database-relationaldatabaseparameter-parametervalue UpdateType: Mutable PrimitiveType: String .FUNCTIONALITY Vaporshell #> [OutputType([LightsailDatabaseRelationalDatabaseParameter])] [cmdletbinding()] Param( [parameter(Mandatory = $false)] [object] $AllowedValues, [parameter(Mandatory = $false)] [object] $ApplyMethod, [parameter(Mandatory = $false)] [object] $ApplyType, [parameter(Mandatory = $false)] [object] $DataType, [parameter(Mandatory = $false)] [object] $Description, [parameter(Mandatory = $false)] [object] $IsModifiable, [parameter(Mandatory = $false)] [object] $ParameterName, [parameter(Mandatory = $false)] [object] $ParameterValue ) Process { $obj = [LightsailDatabaseRelationalDatabaseParameter]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSLightsailDatabaseRelationalDatabaseParameter' function Add-VSLightsailDiskAddOn { <# .SYNOPSIS Adds an AWS::Lightsail::Disk.AddOn resource property to the template. .DESCRIPTION Adds an AWS::Lightsail::Disk.AddOn resource property to the template. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lightsail-disk-addon.html .PARAMETER AddOnType Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lightsail-disk-addon.html#cfn-lightsail-disk-addon-addontype UpdateType: Mutable PrimitiveType: String .PARAMETER Status Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lightsail-disk-addon.html#cfn-lightsail-disk-addon-status UpdateType: Mutable PrimitiveType: String .PARAMETER AutoSnapshotAddOnRequest Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lightsail-disk-addon.html#cfn-lightsail-disk-addon-autosnapshotaddonrequest UpdateType: Mutable Type: AutoSnapshotAddOn .FUNCTIONALITY Vaporshell #> [OutputType([LightsailDiskAddOn])] [cmdletbinding()] Param( [parameter(Mandatory = $true)] [object] $AddOnType, [parameter(Mandatory = $false)] [object] $Status, [parameter(Mandatory = $false)] $AutoSnapshotAddOnRequest ) Process { $obj = [LightsailDiskAddOn]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSLightsailDiskAddOn' function Add-VSLightsailDiskAutoSnapshotAddOn { <# .SYNOPSIS Adds an AWS::Lightsail::Disk.AutoSnapshotAddOn resource property to the template. .DESCRIPTION Adds an AWS::Lightsail::Disk.AutoSnapshotAddOn resource property to the template. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lightsail-disk-autosnapshotaddon.html .PARAMETER SnapshotTimeOfDay Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lightsail-disk-autosnapshotaddon.html#cfn-lightsail-disk-autosnapshotaddon-snapshottimeofday UpdateType: Mutable PrimitiveType: String .FUNCTIONALITY Vaporshell #> [OutputType([LightsailDiskAutoSnapshotAddOn])] [cmdletbinding()] Param( [parameter(Mandatory = $false)] [object] $SnapshotTimeOfDay ) Process { $obj = [LightsailDiskAutoSnapshotAddOn]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSLightsailDiskAutoSnapshotAddOn' function Add-VSLightsailDistributionCacheBehavior { <# .SYNOPSIS Adds an AWS::Lightsail::Distribution.CacheBehavior resource property to the template. .DESCRIPTION Adds an AWS::Lightsail::Distribution.CacheBehavior resource property to the template. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lightsail-distribution-cachebehavior.html .PARAMETER Behavior Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lightsail-distribution-cachebehavior.html#cfn-lightsail-distribution-cachebehavior-behavior UpdateType: Mutable PrimitiveType: String .FUNCTIONALITY Vaporshell #> [OutputType([LightsailDistributionCacheBehavior])] [cmdletbinding()] Param( [parameter(Mandatory = $false)] [object] $Behavior ) Process { $obj = [LightsailDistributionCacheBehavior]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSLightsailDistributionCacheBehavior' function Add-VSLightsailDistributionCacheBehaviorPerPath { <# .SYNOPSIS Adds an AWS::Lightsail::Distribution.CacheBehaviorPerPath resource property to the template. .DESCRIPTION Adds an AWS::Lightsail::Distribution.CacheBehaviorPerPath resource property to the template. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lightsail-distribution-cachebehaviorperpath.html .PARAMETER Behavior Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lightsail-distribution-cachebehaviorperpath.html#cfn-lightsail-distribution-cachebehaviorperpath-behavior UpdateType: Mutable PrimitiveType: String .PARAMETER Path Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lightsail-distribution-cachebehaviorperpath.html#cfn-lightsail-distribution-cachebehaviorperpath-path UpdateType: Mutable PrimitiveType: String .FUNCTIONALITY Vaporshell #> [OutputType([LightsailDistributionCacheBehaviorPerPath])] [cmdletbinding()] Param( [parameter(Mandatory = $false)] [object] $Behavior, [parameter(Mandatory = $false)] [object] $Path ) Process { $obj = [LightsailDistributionCacheBehaviorPerPath]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSLightsailDistributionCacheBehaviorPerPath' function Add-VSLightsailDistributionCacheSettings { <# .SYNOPSIS Adds an AWS::Lightsail::Distribution.CacheSettings resource property to the template. .DESCRIPTION Adds an AWS::Lightsail::Distribution.CacheSettings resource property to the template. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lightsail-distribution-cachesettings.html .PARAMETER AllowedHTTPMethods Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lightsail-distribution-cachesettings.html#cfn-lightsail-distribution-cachesettings-allowedhttpmethods UpdateType: Mutable PrimitiveType: String .PARAMETER CachedHTTPMethods Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lightsail-distribution-cachesettings.html#cfn-lightsail-distribution-cachesettings-cachedhttpmethods UpdateType: Mutable PrimitiveType: String .PARAMETER DefaultTTL Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lightsail-distribution-cachesettings.html#cfn-lightsail-distribution-cachesettings-defaultttl UpdateType: Mutable PrimitiveType: Integer .PARAMETER MaximumTTL Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lightsail-distribution-cachesettings.html#cfn-lightsail-distribution-cachesettings-maximumttl UpdateType: Mutable PrimitiveType: Integer .PARAMETER MinimumTTL Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lightsail-distribution-cachesettings.html#cfn-lightsail-distribution-cachesettings-minimumttl UpdateType: Mutable PrimitiveType: Integer .PARAMETER ForwardedCookies Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lightsail-distribution-cachesettings.html#cfn-lightsail-distribution-cachesettings-forwardedcookies UpdateType: Mutable Type: CookieObject .PARAMETER ForwardedHeaders Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lightsail-distribution-cachesettings.html#cfn-lightsail-distribution-cachesettings-forwardedheaders UpdateType: Mutable Type: HeaderObject .PARAMETER ForwardedQueryStrings Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lightsail-distribution-cachesettings.html#cfn-lightsail-distribution-cachesettings-forwardedquerystrings UpdateType: Mutable Type: QueryStringObject .FUNCTIONALITY Vaporshell #> [OutputType([LightsailDistributionCacheSettings])] [cmdletbinding()] Param( [parameter(Mandatory = $false)] [object] $AllowedHTTPMethods, [parameter(Mandatory = $false)] [object] $CachedHTTPMethods, [parameter(Mandatory = $false)] [object] $DefaultTTL, [parameter(Mandatory = $false)] [object] $MaximumTTL, [parameter(Mandatory = $false)] [object] $MinimumTTL, [parameter(Mandatory = $false)] $ForwardedCookies, [parameter(Mandatory = $false)] $ForwardedHeaders, [parameter(Mandatory = $false)] $ForwardedQueryStrings ) Process { $obj = [LightsailDistributionCacheSettings]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSLightsailDistributionCacheSettings' function Add-VSLightsailDistributionCookieObject { <# .SYNOPSIS Adds an AWS::Lightsail::Distribution.CookieObject resource property to the template. .DESCRIPTION Adds an AWS::Lightsail::Distribution.CookieObject resource property to the template. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lightsail-distribution-cookieobject.html .PARAMETER CookiesAllowList Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lightsail-distribution-cookieobject.html#cfn-lightsail-distribution-cookieobject-cookiesallowlist UpdateType: Mutable Type: List PrimitiveItemType: String DuplicatesAllowed: False .PARAMETER Option Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lightsail-distribution-cookieobject.html#cfn-lightsail-distribution-cookieobject-option UpdateType: Mutable PrimitiveType: String .FUNCTIONALITY Vaporshell #> [OutputType([LightsailDistributionCookieObject])] [cmdletbinding()] Param( [parameter(Mandatory = $false)] $CookiesAllowList, [parameter(Mandatory = $false)] [object] $Option ) Process { $obj = [LightsailDistributionCookieObject]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSLightsailDistributionCookieObject' function Add-VSLightsailDistributionHeaderObject { <# .SYNOPSIS Adds an AWS::Lightsail::Distribution.HeaderObject resource property to the template. .DESCRIPTION Adds an AWS::Lightsail::Distribution.HeaderObject resource property to the template. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lightsail-distribution-headerobject.html .PARAMETER HeadersAllowList Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lightsail-distribution-headerobject.html#cfn-lightsail-distribution-headerobject-headersallowlist UpdateType: Mutable Type: List PrimitiveItemType: String DuplicatesAllowed: False .PARAMETER Option Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lightsail-distribution-headerobject.html#cfn-lightsail-distribution-headerobject-option UpdateType: Mutable PrimitiveType: String .FUNCTIONALITY Vaporshell #> [OutputType([LightsailDistributionHeaderObject])] [cmdletbinding()] Param( [parameter(Mandatory = $false)] $HeadersAllowList, [parameter(Mandatory = $false)] [object] $Option ) Process { $obj = [LightsailDistributionHeaderObject]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSLightsailDistributionHeaderObject' function Add-VSLightsailDistributionInputOrigin { <# .SYNOPSIS Adds an AWS::Lightsail::Distribution.InputOrigin resource property to the template. .DESCRIPTION Adds an AWS::Lightsail::Distribution.InputOrigin resource property to the template. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lightsail-distribution-inputorigin.html .PARAMETER Name Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lightsail-distribution-inputorigin.html#cfn-lightsail-distribution-inputorigin-name UpdateType: Mutable PrimitiveType: String .PARAMETER ProtocolPolicy Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lightsail-distribution-inputorigin.html#cfn-lightsail-distribution-inputorigin-protocolpolicy UpdateType: Mutable PrimitiveType: String .PARAMETER RegionName Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lightsail-distribution-inputorigin.html#cfn-lightsail-distribution-inputorigin-regionname UpdateType: Mutable PrimitiveType: String .FUNCTIONALITY Vaporshell #> [OutputType([LightsailDistributionInputOrigin])] [cmdletbinding()] Param( [parameter(Mandatory = $false)] [object] $Name, [parameter(Mandatory = $false)] [object] $ProtocolPolicy, [parameter(Mandatory = $false)] [object] $RegionName ) Process { $obj = [LightsailDistributionInputOrigin]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSLightsailDistributionInputOrigin' function Add-VSLightsailDistributionQueryStringObject { <# .SYNOPSIS Adds an AWS::Lightsail::Distribution.QueryStringObject resource property to the template. .DESCRIPTION Adds an AWS::Lightsail::Distribution.QueryStringObject resource property to the template. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lightsail-distribution-querystringobject.html .PARAMETER QueryStringsAllowList Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lightsail-distribution-querystringobject.html#cfn-lightsail-distribution-querystringobject-querystringsallowlist UpdateType: Mutable Type: List PrimitiveItemType: String DuplicatesAllowed: False .PARAMETER Option Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lightsail-distribution-querystringobject.html#cfn-lightsail-distribution-querystringobject-option UpdateType: Mutable PrimitiveType: Boolean .FUNCTIONALITY Vaporshell #> [OutputType([LightsailDistributionQueryStringObject])] [cmdletbinding()] Param( [parameter(Mandatory = $false)] $QueryStringsAllowList, [parameter(Mandatory = $false)] [object] $Option ) Process { $obj = [LightsailDistributionQueryStringObject]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSLightsailDistributionQueryStringObject' function Add-VSLightsailInstanceAddOn { <# .SYNOPSIS Adds an AWS::Lightsail::Instance.AddOn resource property to the template. .DESCRIPTION Adds an AWS::Lightsail::Instance.AddOn resource property to the template. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lightsail-instance-addon.html .PARAMETER AddOnType Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lightsail-instance-addon.html#cfn-lightsail-instance-addon-addontype UpdateType: Mutable PrimitiveType: String .PARAMETER Status Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lightsail-instance-addon.html#cfn-lightsail-instance-addon-status UpdateType: Mutable PrimitiveType: String .PARAMETER AutoSnapshotAddOnRequest Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lightsail-instance-addon.html#cfn-lightsail-instance-addon-autosnapshotaddonrequest UpdateType: Mutable Type: AutoSnapshotAddOn .FUNCTIONALITY Vaporshell #> [OutputType([LightsailInstanceAddOn])] [cmdletbinding()] Param( [parameter(Mandatory = $true)] [object] $AddOnType, [parameter(Mandatory = $false)] [object] $Status, [parameter(Mandatory = $false)] $AutoSnapshotAddOnRequest ) Process { $obj = [LightsailInstanceAddOn]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSLightsailInstanceAddOn' function Add-VSLightsailInstanceAutoSnapshotAddOn { <# .SYNOPSIS Adds an AWS::Lightsail::Instance.AutoSnapshotAddOn resource property to the template. .DESCRIPTION Adds an AWS::Lightsail::Instance.AutoSnapshotAddOn resource property to the template. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lightsail-instance-autosnapshotaddon.html .PARAMETER SnapshotTimeOfDay Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lightsail-instance-autosnapshotaddon.html#cfn-lightsail-instance-autosnapshotaddon-snapshottimeofday UpdateType: Mutable PrimitiveType: String .FUNCTIONALITY Vaporshell #> [OutputType([LightsailInstanceAutoSnapshotAddOn])] [cmdletbinding()] Param( [parameter(Mandatory = $false)] [object] $SnapshotTimeOfDay ) Process { $obj = [LightsailInstanceAutoSnapshotAddOn]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSLightsailInstanceAutoSnapshotAddOn' function Add-VSLightsailInstanceDisk { <# .SYNOPSIS Adds an AWS::Lightsail::Instance.Disk resource property to the template. .DESCRIPTION Adds an AWS::Lightsail::Instance.Disk resource property to the template. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lightsail-instance-disk.html .PARAMETER DiskName Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lightsail-instance-disk.html#cfn-lightsail-instance-disk-diskname UpdateType: Mutable PrimitiveType: String .PARAMETER SizeInGb Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lightsail-instance-disk.html#cfn-lightsail-instance-disk-sizeingb UpdateType: Mutable PrimitiveType: String .PARAMETER IsSystemDisk Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lightsail-instance-disk.html#cfn-lightsail-instance-disk-issystemdisk UpdateType: Mutable PrimitiveType: Boolean .PARAMETER IOPS Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lightsail-instance-disk.html#cfn-lightsail-instance-disk-iops UpdateType: Mutable PrimitiveType: Integer .PARAMETER Path Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lightsail-instance-disk.html#cfn-lightsail-instance-disk-path UpdateType: Mutable PrimitiveType: String .PARAMETER AttachedTo Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lightsail-instance-disk.html#cfn-lightsail-instance-disk-attachedto UpdateType: Mutable PrimitiveType: String .PARAMETER AttachmentState Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lightsail-instance-disk.html#cfn-lightsail-instance-disk-attachmentstate UpdateType: Mutable PrimitiveType: String .FUNCTIONALITY Vaporshell #> [OutputType([LightsailInstanceDisk])] [cmdletbinding()] Param( [parameter(Mandatory = $true)] [object] $DiskName, [parameter(Mandatory = $false)] [object] $SizeInGb, [parameter(Mandatory = $false)] [object] $IsSystemDisk, [parameter(Mandatory = $false)] [object] $IOPS, [parameter(Mandatory = $true)] [object] $Path, [parameter(Mandatory = $false)] [object] $AttachedTo, [parameter(Mandatory = $false)] [object] $AttachmentState ) Process { $obj = [LightsailInstanceDisk]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSLightsailInstanceDisk' function Add-VSLightsailInstanceHardware { <# .SYNOPSIS Adds an AWS::Lightsail::Instance.Hardware resource property to the template. .DESCRIPTION Adds an AWS::Lightsail::Instance.Hardware resource property to the template. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lightsail-instance-hardware.html .PARAMETER CpuCount Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lightsail-instance-hardware.html#cfn-lightsail-instance-hardware-cpucount UpdateType: Mutable PrimitiveType: Integer .PARAMETER RamSizeInGb Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lightsail-instance-hardware.html#cfn-lightsail-instance-hardware-ramsizeingb UpdateType: Mutable PrimitiveType: Integer .PARAMETER Disks Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lightsail-instance-hardware.html#cfn-lightsail-instance-hardware-disks UpdateType: Mutable Type: List ItemType: Disk DuplicatesAllowed: False .FUNCTIONALITY Vaporshell #> [OutputType([LightsailInstanceHardware])] [cmdletbinding()] Param( [parameter(Mandatory = $false)] [object] $CpuCount, [parameter(Mandatory = $false)] [object] $RamSizeInGb, [parameter(Mandatory = $false)] [object] $Disks ) Process { $obj = [LightsailInstanceHardware]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSLightsailInstanceHardware' function Add-VSLightsailInstanceLocation { <# .SYNOPSIS Adds an AWS::Lightsail::Instance.Location resource property to the template. .DESCRIPTION Adds an AWS::Lightsail::Instance.Location resource property to the template. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lightsail-instance-location.html .PARAMETER AvailabilityZone Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lightsail-instance-location.html#cfn-lightsail-instance-location-availabilityzone UpdateType: Mutable PrimitiveType: String .PARAMETER RegionName Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lightsail-instance-location.html#cfn-lightsail-instance-location-regionname UpdateType: Mutable PrimitiveType: String .FUNCTIONALITY Vaporshell #> [OutputType([LightsailInstanceLocation])] [cmdletbinding()] Param( [parameter(Mandatory = $false)] [object] $AvailabilityZone, [parameter(Mandatory = $false)] [object] $RegionName ) Process { $obj = [LightsailInstanceLocation]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSLightsailInstanceLocation' function Add-VSLightsailInstanceMonthlyTransfer { <# .SYNOPSIS Adds an AWS::Lightsail::Instance.MonthlyTransfer resource property to the template. .DESCRIPTION Adds an AWS::Lightsail::Instance.MonthlyTransfer resource property to the template. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lightsail-instance-monthlytransfer.html .PARAMETER GbPerMonthAllocated Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lightsail-instance-monthlytransfer.html#cfn-lightsail-instance-monthlytransfer-gbpermonthallocated UpdateType: Mutable PrimitiveType: String .FUNCTIONALITY Vaporshell #> [OutputType([LightsailInstanceMonthlyTransfer])] [cmdletbinding()] Param( [parameter(Mandatory = $false)] [object] $GbPerMonthAllocated ) Process { $obj = [LightsailInstanceMonthlyTransfer]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSLightsailInstanceMonthlyTransfer' function Add-VSLightsailInstanceNetworking { <# .SYNOPSIS Adds an AWS::Lightsail::Instance.Networking resource property to the template. .DESCRIPTION Adds an AWS::Lightsail::Instance.Networking resource property to the template. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lightsail-instance-networking.html .PARAMETER Ports Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lightsail-instance-networking.html#cfn-lightsail-instance-networking-ports UpdateType: Mutable Type: List ItemType: Port DuplicatesAllowed: False .PARAMETER MonthlyTransfer Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lightsail-instance-networking.html#cfn-lightsail-instance-networking-monthlytransfer UpdateType: Mutable Type: MonthlyTransfer .FUNCTIONALITY Vaporshell #> [OutputType([LightsailInstanceNetworking])] [cmdletbinding()] Param( [parameter(Mandatory = $true)] [object] $Ports, [parameter(Mandatory = $false)] $MonthlyTransfer ) Process { $obj = [LightsailInstanceNetworking]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSLightsailInstanceNetworking' function Add-VSLightsailInstancePort { <# .SYNOPSIS Adds an AWS::Lightsail::Instance.Port resource property to the template. .DESCRIPTION Adds an AWS::Lightsail::Instance.Port resource property to the template. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lightsail-instance-port.html .PARAMETER FromPort Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lightsail-instance-port.html#cfn-lightsail-instance-port-fromport UpdateType: Mutable PrimitiveType: Integer .PARAMETER ToPort Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lightsail-instance-port.html#cfn-lightsail-instance-port-toport UpdateType: Mutable PrimitiveType: Integer .PARAMETER Protocol Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lightsail-instance-port.html#cfn-lightsail-instance-port-protocol UpdateType: Mutable PrimitiveType: String .PARAMETER AccessFrom Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lightsail-instance-port.html#cfn-lightsail-instance-port-accessfrom UpdateType: Mutable PrimitiveType: String .PARAMETER AccessType Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lightsail-instance-port.html#cfn-lightsail-instance-port-accesstype UpdateType: Mutable PrimitiveType: String .PARAMETER CommonName Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lightsail-instance-port.html#cfn-lightsail-instance-port-commonname UpdateType: Mutable PrimitiveType: String .PARAMETER AccessDirection Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lightsail-instance-port.html#cfn-lightsail-instance-port-accessdirection UpdateType: Mutable PrimitiveType: String .PARAMETER Ipv6Cidrs Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lightsail-instance-port.html#cfn-lightsail-instance-port-ipv6cidrs UpdateType: Mutable Type: List PrimitiveItemType: String .PARAMETER CidrListAliases Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lightsail-instance-port.html#cfn-lightsail-instance-port-cidrlistaliases UpdateType: Mutable Type: List PrimitiveItemType: String .PARAMETER Cidrs Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lightsail-instance-port.html#cfn-lightsail-instance-port-cidrs UpdateType: Mutable Type: List PrimitiveItemType: String .FUNCTIONALITY Vaporshell #> [OutputType([LightsailInstancePort])] [cmdletbinding()] Param( [parameter(Mandatory = $false)] [object] $FromPort, [parameter(Mandatory = $false)] [object] $ToPort, [parameter(Mandatory = $false)] [object] $Protocol, [parameter(Mandatory = $false)] [object] $AccessFrom, [parameter(Mandatory = $false)] [object] $AccessType, [parameter(Mandatory = $false)] [object] $CommonName, [parameter(Mandatory = $false)] [object] $AccessDirection, [parameter(Mandatory = $false)] $Ipv6Cidrs, [parameter(Mandatory = $false)] $CidrListAliases, [parameter(Mandatory = $false)] $Cidrs ) Process { $obj = [LightsailInstancePort]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSLightsailInstancePort' function Add-VSLightsailInstanceState { <# .SYNOPSIS Adds an AWS::Lightsail::Instance.State resource property to the template. .DESCRIPTION Adds an AWS::Lightsail::Instance.State resource property to the template. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lightsail-instance-state.html .PARAMETER Code Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lightsail-instance-state.html#cfn-lightsail-instance-state-code UpdateType: Mutable PrimitiveType: Integer .PARAMETER Name Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lightsail-instance-state.html#cfn-lightsail-instance-state-name UpdateType: Mutable PrimitiveType: String .FUNCTIONALITY Vaporshell #> [OutputType([LightsailInstanceState])] [cmdletbinding()] Param( [parameter(Mandatory = $false)] [object] $Code, [parameter(Mandatory = $false)] [object] $Name ) Process { $obj = [LightsailInstanceState]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSLightsailInstanceState' function New-VSLightsailAlarm { <# .SYNOPSIS Adds an AWS::Lightsail::Alarm resource to the template. .DESCRIPTION Adds an AWS::Lightsail::Alarm resource to the template. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-lightsail-alarm.html .PARAMETER LogicalId The logical ID must be alphanumeric (A-Za-z0-9) and unique within the template. Use the logical name to reference the resource in other parts of the template. For example, if you want to map an Amazon Elastic Block Store volume to an Amazon EC2 instance, you reference the logical IDs to associate the block stores with the instance. .PARAMETER AlarmName Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-lightsail-alarm.html#cfn-lightsail-alarm-alarmname UpdateType: Immutable PrimitiveType: String .PARAMETER MonitoredResourceName Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-lightsail-alarm.html#cfn-lightsail-alarm-monitoredresourcename UpdateType: Immutable PrimitiveType: String .PARAMETER MetricName Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-lightsail-alarm.html#cfn-lightsail-alarm-metricname UpdateType: Immutable PrimitiveType: String .PARAMETER ComparisonOperator Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-lightsail-alarm.html#cfn-lightsail-alarm-comparisonoperator UpdateType: Mutable PrimitiveType: String .PARAMETER ContactProtocols Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-lightsail-alarm.html#cfn-lightsail-alarm-contactprotocols UpdateType: Mutable Type: List PrimitiveItemType: String DuplicatesAllowed: False .PARAMETER DatapointsToAlarm Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-lightsail-alarm.html#cfn-lightsail-alarm-datapointstoalarm UpdateType: Mutable PrimitiveType: Integer .PARAMETER EvaluationPeriods Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-lightsail-alarm.html#cfn-lightsail-alarm-evaluationperiods UpdateType: Mutable PrimitiveType: Integer .PARAMETER NotificationEnabled Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-lightsail-alarm.html#cfn-lightsail-alarm-notificationenabled UpdateType: Mutable PrimitiveType: Boolean .PARAMETER NotificationTriggers Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-lightsail-alarm.html#cfn-lightsail-alarm-notificationtriggers UpdateType: Mutable Type: List PrimitiveItemType: String DuplicatesAllowed: False .PARAMETER Threshold Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-lightsail-alarm.html#cfn-lightsail-alarm-threshold UpdateType: Mutable PrimitiveType: Double .PARAMETER TreatMissingData Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-lightsail-alarm.html#cfn-lightsail-alarm-treatmissingdata UpdateType: Mutable PrimitiveType: String .PARAMETER DeletionPolicy With the DeletionPolicy attribute you can preserve or (in some cases) backup a resource when its stack is deleted. You specify a DeletionPolicy attribute for each resource that you want to control. If a resource has no DeletionPolicy attribute, AWS CloudFormation deletes the resource by default. To keep a resource when its stack is deleted, specify Retain for that resource. You can use retain for any resource. For example, you can retain a nested stack, S3 bucket, or EC2 instance so that you can continue to use or modify those resources after you delete their stacks. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER UpdateReplacePolicy Use the UpdateReplacePolicy attribute to retain or (in some cases) backup the existing physical instance of a resource when it is replaced during a stack update operation. When you initiate a stack update, AWS CloudFormation updates resources based on differences between what you submit and the stack's current template and parameters. If you update a resource property that requires that the resource be replaced, AWS CloudFormation recreates the resource during the update. Recreating the resource generates a new physical ID. AWS CloudFormation creates the replacement resource first, and then changes references from other dependent resources to point to the replacement resource. By default, AWS CloudFormation then deletes the old resource. Using the UpdateReplacePolicy, you can specify that AWS CloudFormation retain or (in some cases) create a snapshot of the old resource. For resources that support snapshots, such as AWS::EC2::Volume, specify Snapshot to have AWS CloudFormation create a snapshot before deleting the old resource instance. You can apply the UpdateReplacePolicy attribute to any resource. UpdateReplacePolicy is only executed if you update a resource property whose update behavior is specified as Replacement, thereby causing AWS CloudFormation to replace the old resource with a new one with a new physical ID. For example, if you update the Engine property of an AWS::RDS::DBInstance resource type, AWS CloudFormation creates a new resource and replaces the current DB instance resource with the new one. The UpdateReplacePolicy attribute would then dictate whether AWS CloudFormation deleted, retained, or created a snapshot of the old DB instance. The update behavior for each property of a resource is specified in the reference topic for that resource in the AWS Resource and Property Types Reference. For more information on resource update behavior, see Update Behaviors of Stack Resources. The UpdateReplacePolicy attribute applies to stack updates you perform directly, as well as stack updates performed using change sets. Note Resources that are retained continue to exist and continue to incur applicable charges until you delete those resources. Snapshots that are created with this policy continue to exist and continue to incur applicable charges until you delete those snapshots. UpdateReplacePolicy retains the old physical resource or snapshot, but removes it from AWS CloudFormation's scope. UpdateReplacePolicy differs from the DeletionPolicy attribute in that it only applies to resources replaced during stack updates. Use DeletionPolicy for resources deleted when a stack is deleted, or when the resource definition itself is deleted from the template as part of a stack update. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER DependsOn With the DependsOn attribute you can specify that the creation of a specific resource follows another. When you add a DependsOn attribute to a resource, that resource is created only after the creation of the resource specified in the DependsOn attribute. This parameter takes a string or list of strings representing Logical IDs of resources that must be created prior to this resource being created. .PARAMETER Metadata The Metadata attribute enables you to associate structured data with a resource. By adding a Metadata attribute to a resource, you can add data in JSON or YAML to the resource declaration. In addition, you can use intrinsic functions (such as GetAtt and Ref), parameters, and pseudo parameters within the Metadata attribute to add those interpreted values. This will be returned when describing the resource using AWS CLI. .PARAMETER UpdatePolicy Use the UpdatePolicy attribute to specify how AWS CloudFormation handles updates to the AWS::AutoScaling::AutoScalingGroup resource. AWS CloudFormation invokes one of three update policies depending on the type of change you make or whether a scheduled action is associated with the Auto Scaling group. You must use the "Add-UpdatePolicy" function or the [UpdatePolicy] class here. .PARAMETER Condition Logical ID of the condition that this resource needs to be true in order for this resource to be provisioned. .FUNCTIONALITY Vaporshell #> [OutputType([LightsailAlarm])] [cmdletbinding()] Param( [parameter(Mandatory = $true,Position = 0)] [ValidateLogicalId()] [string] $LogicalId, [parameter(Mandatory = $true)] [object] $AlarmName, [parameter(Mandatory = $true)] [object] $MonitoredResourceName, [parameter(Mandatory = $true)] [object] $MetricName, [parameter(Mandatory = $true)] [object] $ComparisonOperator, [parameter(Mandatory = $false)] $ContactProtocols, [parameter(Mandatory = $false)] [object] $DatapointsToAlarm, [parameter(Mandatory = $true)] [object] $EvaluationPeriods, [parameter(Mandatory = $false)] [object] $NotificationEnabled, [parameter(Mandatory = $false)] $NotificationTriggers, [parameter(Mandatory = $true)] [object] $Threshold, [parameter(Mandatory = $false)] [object] $TreatMissingData, [parameter()] [DeletionPolicy] $DeletionPolicy, [parameter()] [UpdateReplacePolicy] $UpdateReplacePolicy, [parameter(Mandatory = $false)] [string[]] $DependsOn, [parameter(Mandatory = $false)] [VSJson] $Metadata, [parameter(Mandatory = $false)] [UpdatePolicy] $UpdatePolicy, [parameter(Mandatory = $false)] [string] $Condition ) Process { $obj = [LightsailAlarm]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'New-VSLightsailAlarm' function New-VSLightsailBucket { <# .SYNOPSIS Adds an AWS::Lightsail::Bucket resource to the template. .DESCRIPTION Adds an AWS::Lightsail::Bucket resource to the template. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-lightsail-bucket.html .PARAMETER LogicalId The logical ID must be alphanumeric (A-Za-z0-9) and unique within the template. Use the logical name to reference the resource in other parts of the template. For example, if you want to map an Amazon Elastic Block Store volume to an Amazon EC2 instance, you reference the logical IDs to associate the block stores with the instance. .PARAMETER BucketName Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-lightsail-bucket.html#cfn-lightsail-bucket-bucketname UpdateType: Immutable PrimitiveType: String .PARAMETER BundleId Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-lightsail-bucket.html#cfn-lightsail-bucket-bundleid UpdateType: Mutable PrimitiveType: String .PARAMETER ObjectVersioning Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-lightsail-bucket.html#cfn-lightsail-bucket-objectversioning UpdateType: Mutable PrimitiveType: Boolean .PARAMETER AccessRules Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-lightsail-bucket.html#cfn-lightsail-bucket-accessrules UpdateType: Mutable Type: AccessRules .PARAMETER ResourcesReceivingAccess Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-lightsail-bucket.html#cfn-lightsail-bucket-resourcesreceivingaccess UpdateType: Mutable Type: List PrimitiveItemType: String DuplicatesAllowed: False .PARAMETER ReadOnlyAccessAccounts Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-lightsail-bucket.html#cfn-lightsail-bucket-readonlyaccessaccounts UpdateType: Mutable Type: List PrimitiveItemType: String DuplicatesAllowed: False .PARAMETER Tags Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-lightsail-bucket.html#cfn-lightsail-bucket-tags UpdateType: Mutable Type: List ItemType: Tag DuplicatesAllowed: False .PARAMETER DeletionPolicy With the DeletionPolicy attribute you can preserve or (in some cases) backup a resource when its stack is deleted. You specify a DeletionPolicy attribute for each resource that you want to control. If a resource has no DeletionPolicy attribute, AWS CloudFormation deletes the resource by default. To keep a resource when its stack is deleted, specify Retain for that resource. You can use retain for any resource. For example, you can retain a nested stack, S3 bucket, or EC2 instance so that you can continue to use or modify those resources after you delete their stacks. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER UpdateReplacePolicy Use the UpdateReplacePolicy attribute to retain or (in some cases) backup the existing physical instance of a resource when it is replaced during a stack update operation. When you initiate a stack update, AWS CloudFormation updates resources based on differences between what you submit and the stack's current template and parameters. If you update a resource property that requires that the resource be replaced, AWS CloudFormation recreates the resource during the update. Recreating the resource generates a new physical ID. AWS CloudFormation creates the replacement resource first, and then changes references from other dependent resources to point to the replacement resource. By default, AWS CloudFormation then deletes the old resource. Using the UpdateReplacePolicy, you can specify that AWS CloudFormation retain or (in some cases) create a snapshot of the old resource. For resources that support snapshots, such as AWS::EC2::Volume, specify Snapshot to have AWS CloudFormation create a snapshot before deleting the old resource instance. You can apply the UpdateReplacePolicy attribute to any resource. UpdateReplacePolicy is only executed if you update a resource property whose update behavior is specified as Replacement, thereby causing AWS CloudFormation to replace the old resource with a new one with a new physical ID. For example, if you update the Engine property of an AWS::RDS::DBInstance resource type, AWS CloudFormation creates a new resource and replaces the current DB instance resource with the new one. The UpdateReplacePolicy attribute would then dictate whether AWS CloudFormation deleted, retained, or created a snapshot of the old DB instance. The update behavior for each property of a resource is specified in the reference topic for that resource in the AWS Resource and Property Types Reference. For more information on resource update behavior, see Update Behaviors of Stack Resources. The UpdateReplacePolicy attribute applies to stack updates you perform directly, as well as stack updates performed using change sets. Note Resources that are retained continue to exist and continue to incur applicable charges until you delete those resources. Snapshots that are created with this policy continue to exist and continue to incur applicable charges until you delete those snapshots. UpdateReplacePolicy retains the old physical resource or snapshot, but removes it from AWS CloudFormation's scope. UpdateReplacePolicy differs from the DeletionPolicy attribute in that it only applies to resources replaced during stack updates. Use DeletionPolicy for resources deleted when a stack is deleted, or when the resource definition itself is deleted from the template as part of a stack update. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER DependsOn With the DependsOn attribute you can specify that the creation of a specific resource follows another. When you add a DependsOn attribute to a resource, that resource is created only after the creation of the resource specified in the DependsOn attribute. This parameter takes a string or list of strings representing Logical IDs of resources that must be created prior to this resource being created. .PARAMETER Metadata The Metadata attribute enables you to associate structured data with a resource. By adding a Metadata attribute to a resource, you can add data in JSON or YAML to the resource declaration. In addition, you can use intrinsic functions (such as GetAtt and Ref), parameters, and pseudo parameters within the Metadata attribute to add those interpreted values. This will be returned when describing the resource using AWS CLI. .PARAMETER UpdatePolicy Use the UpdatePolicy attribute to specify how AWS CloudFormation handles updates to the AWS::AutoScaling::AutoScalingGroup resource. AWS CloudFormation invokes one of three update policies depending on the type of change you make or whether a scheduled action is associated with the Auto Scaling group. You must use the "Add-UpdatePolicy" function or the [UpdatePolicy] class here. .PARAMETER Condition Logical ID of the condition that this resource needs to be true in order for this resource to be provisioned. .FUNCTIONALITY Vaporshell #> [OutputType([LightsailBucket])] [cmdletbinding()] Param( [parameter(Mandatory = $true,Position = 0)] [ValidateLogicalId()] [string] $LogicalId, [parameter(Mandatory = $true)] [object] $BucketName, [parameter(Mandatory = $true)] [object] $BundleId, [parameter(Mandatory = $false)] [object] $ObjectVersioning, [parameter(Mandatory = $false)] $AccessRules, [parameter(Mandatory = $false)] $ResourcesReceivingAccess, [parameter(Mandatory = $false)] $ReadOnlyAccessAccounts, [TransformTag()] [object] [parameter(Mandatory = $false)] $Tags, [parameter()] [DeletionPolicy] $DeletionPolicy, [parameter()] [UpdateReplacePolicy] $UpdateReplacePolicy, [parameter(Mandatory = $false)] [string[]] $DependsOn, [parameter(Mandatory = $false)] [VSJson] $Metadata, [parameter(Mandatory = $false)] [UpdatePolicy] $UpdatePolicy, [parameter(Mandatory = $false)] [string] $Condition ) Process { $obj = [LightsailBucket]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'New-VSLightsailBucket' function New-VSLightsailCertificate { <# .SYNOPSIS Adds an AWS::Lightsail::Certificate resource to the template. .DESCRIPTION Adds an AWS::Lightsail::Certificate resource to the template. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-lightsail-certificate.html .PARAMETER LogicalId The logical ID must be alphanumeric (A-Za-z0-9) and unique within the template. Use the logical name to reference the resource in other parts of the template. For example, if you want to map an Amazon Elastic Block Store volume to an Amazon EC2 instance, you reference the logical IDs to associate the block stores with the instance. .PARAMETER CertificateName Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-lightsail-certificate.html#cfn-lightsail-certificate-certificatename UpdateType: Immutable PrimitiveType: String .PARAMETER DomainName Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-lightsail-certificate.html#cfn-lightsail-certificate-domainname UpdateType: Immutable PrimitiveType: String .PARAMETER SubjectAlternativeNames Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-lightsail-certificate.html#cfn-lightsail-certificate-subjectalternativenames UpdateType: Immutable Type: List PrimitiveItemType: String DuplicatesAllowed: False .PARAMETER Tags Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-lightsail-certificate.html#cfn-lightsail-certificate-tags UpdateType: Mutable Type: List ItemType: Tag DuplicatesAllowed: False .PARAMETER DeletionPolicy With the DeletionPolicy attribute you can preserve or (in some cases) backup a resource when its stack is deleted. You specify a DeletionPolicy attribute for each resource that you want to control. If a resource has no DeletionPolicy attribute, AWS CloudFormation deletes the resource by default. To keep a resource when its stack is deleted, specify Retain for that resource. You can use retain for any resource. For example, you can retain a nested stack, S3 bucket, or EC2 instance so that you can continue to use or modify those resources after you delete their stacks. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER UpdateReplacePolicy Use the UpdateReplacePolicy attribute to retain or (in some cases) backup the existing physical instance of a resource when it is replaced during a stack update operation. When you initiate a stack update, AWS CloudFormation updates resources based on differences between what you submit and the stack's current template and parameters. If you update a resource property that requires that the resource be replaced, AWS CloudFormation recreates the resource during the update. Recreating the resource generates a new physical ID. AWS CloudFormation creates the replacement resource first, and then changes references from other dependent resources to point to the replacement resource. By default, AWS CloudFormation then deletes the old resource. Using the UpdateReplacePolicy, you can specify that AWS CloudFormation retain or (in some cases) create a snapshot of the old resource. For resources that support snapshots, such as AWS::EC2::Volume, specify Snapshot to have AWS CloudFormation create a snapshot before deleting the old resource instance. You can apply the UpdateReplacePolicy attribute to any resource. UpdateReplacePolicy is only executed if you update a resource property whose update behavior is specified as Replacement, thereby causing AWS CloudFormation to replace the old resource with a new one with a new physical ID. For example, if you update the Engine property of an AWS::RDS::DBInstance resource type, AWS CloudFormation creates a new resource and replaces the current DB instance resource with the new one. The UpdateReplacePolicy attribute would then dictate whether AWS CloudFormation deleted, retained, or created a snapshot of the old DB instance. The update behavior for each property of a resource is specified in the reference topic for that resource in the AWS Resource and Property Types Reference. For more information on resource update behavior, see Update Behaviors of Stack Resources. The UpdateReplacePolicy attribute applies to stack updates you perform directly, as well as stack updates performed using change sets. Note Resources that are retained continue to exist and continue to incur applicable charges until you delete those resources. Snapshots that are created with this policy continue to exist and continue to incur applicable charges until you delete those snapshots. UpdateReplacePolicy retains the old physical resource or snapshot, but removes it from AWS CloudFormation's scope. UpdateReplacePolicy differs from the DeletionPolicy attribute in that it only applies to resources replaced during stack updates. Use DeletionPolicy for resources deleted when a stack is deleted, or when the resource definition itself is deleted from the template as part of a stack update. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER DependsOn With the DependsOn attribute you can specify that the creation of a specific resource follows another. When you add a DependsOn attribute to a resource, that resource is created only after the creation of the resource specified in the DependsOn attribute. This parameter takes a string or list of strings representing Logical IDs of resources that must be created prior to this resource being created. .PARAMETER Metadata The Metadata attribute enables you to associate structured data with a resource. By adding a Metadata attribute to a resource, you can add data in JSON or YAML to the resource declaration. In addition, you can use intrinsic functions (such as GetAtt and Ref), parameters, and pseudo parameters within the Metadata attribute to add those interpreted values. This will be returned when describing the resource using AWS CLI. .PARAMETER UpdatePolicy Use the UpdatePolicy attribute to specify how AWS CloudFormation handles updates to the AWS::AutoScaling::AutoScalingGroup resource. AWS CloudFormation invokes one of three update policies depending on the type of change you make or whether a scheduled action is associated with the Auto Scaling group. You must use the "Add-UpdatePolicy" function or the [UpdatePolicy] class here. .PARAMETER Condition Logical ID of the condition that this resource needs to be true in order for this resource to be provisioned. .FUNCTIONALITY Vaporshell #> [OutputType([LightsailCertificate])] [cmdletbinding()] Param( [parameter(Mandatory = $true,Position = 0)] [ValidateLogicalId()] [string] $LogicalId, [parameter(Mandatory = $true)] [object] $CertificateName, [parameter(Mandatory = $true)] [object] $DomainName, [parameter(Mandatory = $false)] $SubjectAlternativeNames, [TransformTag()] [object] [parameter(Mandatory = $false)] $Tags, [parameter()] [DeletionPolicy] $DeletionPolicy, [parameter()] [UpdateReplacePolicy] $UpdateReplacePolicy, [parameter(Mandatory = $false)] [string[]] $DependsOn, [parameter(Mandatory = $false)] [VSJson] $Metadata, [parameter(Mandatory = $false)] [UpdatePolicy] $UpdatePolicy, [parameter(Mandatory = $false)] [string] $Condition ) Process { $obj = [LightsailCertificate]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'New-VSLightsailCertificate' function New-VSLightsailContainer { <# .SYNOPSIS Adds an AWS::Lightsail::Container resource to the template. .DESCRIPTION Adds an AWS::Lightsail::Container resource to the template. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-lightsail-container.html .PARAMETER LogicalId The logical ID must be alphanumeric (A-Za-z0-9) and unique within the template. Use the logical name to reference the resource in other parts of the template. For example, if you want to map an Amazon Elastic Block Store volume to an Amazon EC2 instance, you reference the logical IDs to associate the block stores with the instance. .PARAMETER ServiceName Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-lightsail-container.html#cfn-lightsail-container-servicename UpdateType: Immutable PrimitiveType: String .PARAMETER Power Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-lightsail-container.html#cfn-lightsail-container-power UpdateType: Mutable PrimitiveType: String .PARAMETER Scale Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-lightsail-container.html#cfn-lightsail-container-scale UpdateType: Mutable PrimitiveType: Integer .PARAMETER PublicDomainNames Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-lightsail-container.html#cfn-lightsail-container-publicdomainnames UpdateType: Mutable Type: List ItemType: PublicDomainName DuplicatesAllowed: False .PARAMETER ContainerServiceDeployment Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-lightsail-container.html#cfn-lightsail-container-containerservicedeployment UpdateType: Mutable Type: ContainerServiceDeployment .PARAMETER IsDisabled Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-lightsail-container.html#cfn-lightsail-container-isdisabled UpdateType: Mutable PrimitiveType: Boolean .PARAMETER Tags Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-lightsail-container.html#cfn-lightsail-container-tags UpdateType: Mutable Type: List ItemType: Tag DuplicatesAllowed: False .PARAMETER DeletionPolicy With the DeletionPolicy attribute you can preserve or (in some cases) backup a resource when its stack is deleted. You specify a DeletionPolicy attribute for each resource that you want to control. If a resource has no DeletionPolicy attribute, AWS CloudFormation deletes the resource by default. To keep a resource when its stack is deleted, specify Retain for that resource. You can use retain for any resource. For example, you can retain a nested stack, S3 bucket, or EC2 instance so that you can continue to use or modify those resources after you delete their stacks. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER UpdateReplacePolicy Use the UpdateReplacePolicy attribute to retain or (in some cases) backup the existing physical instance of a resource when it is replaced during a stack update operation. When you initiate a stack update, AWS CloudFormation updates resources based on differences between what you submit and the stack's current template and parameters. If you update a resource property that requires that the resource be replaced, AWS CloudFormation recreates the resource during the update. Recreating the resource generates a new physical ID. AWS CloudFormation creates the replacement resource first, and then changes references from other dependent resources to point to the replacement resource. By default, AWS CloudFormation then deletes the old resource. Using the UpdateReplacePolicy, you can specify that AWS CloudFormation retain or (in some cases) create a snapshot of the old resource. For resources that support snapshots, such as AWS::EC2::Volume, specify Snapshot to have AWS CloudFormation create a snapshot before deleting the old resource instance. You can apply the UpdateReplacePolicy attribute to any resource. UpdateReplacePolicy is only executed if you update a resource property whose update behavior is specified as Replacement, thereby causing AWS CloudFormation to replace the old resource with a new one with a new physical ID. For example, if you update the Engine property of an AWS::RDS::DBInstance resource type, AWS CloudFormation creates a new resource and replaces the current DB instance resource with the new one. The UpdateReplacePolicy attribute would then dictate whether AWS CloudFormation deleted, retained, or created a snapshot of the old DB instance. The update behavior for each property of a resource is specified in the reference topic for that resource in the AWS Resource and Property Types Reference. For more information on resource update behavior, see Update Behaviors of Stack Resources. The UpdateReplacePolicy attribute applies to stack updates you perform directly, as well as stack updates performed using change sets. Note Resources that are retained continue to exist and continue to incur applicable charges until you delete those resources. Snapshots that are created with this policy continue to exist and continue to incur applicable charges until you delete those snapshots. UpdateReplacePolicy retains the old physical resource or snapshot, but removes it from AWS CloudFormation's scope. UpdateReplacePolicy differs from the DeletionPolicy attribute in that it only applies to resources replaced during stack updates. Use DeletionPolicy for resources deleted when a stack is deleted, or when the resource definition itself is deleted from the template as part of a stack update. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER DependsOn With the DependsOn attribute you can specify that the creation of a specific resource follows another. When you add a DependsOn attribute to a resource, that resource is created only after the creation of the resource specified in the DependsOn attribute. This parameter takes a string or list of strings representing Logical IDs of resources that must be created prior to this resource being created. .PARAMETER Metadata The Metadata attribute enables you to associate structured data with a resource. By adding a Metadata attribute to a resource, you can add data in JSON or YAML to the resource declaration. In addition, you can use intrinsic functions (such as GetAtt and Ref), parameters, and pseudo parameters within the Metadata attribute to add those interpreted values. This will be returned when describing the resource using AWS CLI. .PARAMETER UpdatePolicy Use the UpdatePolicy attribute to specify how AWS CloudFormation handles updates to the AWS::AutoScaling::AutoScalingGroup resource. AWS CloudFormation invokes one of three update policies depending on the type of change you make or whether a scheduled action is associated with the Auto Scaling group. You must use the "Add-UpdatePolicy" function or the [UpdatePolicy] class here. .PARAMETER Condition Logical ID of the condition that this resource needs to be true in order for this resource to be provisioned. .FUNCTIONALITY Vaporshell #> [OutputType([LightsailContainer])] [cmdletbinding()] Param( [parameter(Mandatory = $true,Position = 0)] [ValidateLogicalId()] [string] $LogicalId, [parameter(Mandatory = $true)] [object] $ServiceName, [parameter(Mandatory = $true)] [object] $Power, [parameter(Mandatory = $true)] [object] $Scale, [parameter(Mandatory = $false)] [object] $PublicDomainNames, [parameter(Mandatory = $false)] $ContainerServiceDeployment, [parameter(Mandatory = $false)] [object] $IsDisabled, [TransformTag()] [object] [parameter(Mandatory = $false)] $Tags, [parameter()] [DeletionPolicy] $DeletionPolicy, [parameter()] [UpdateReplacePolicy] $UpdateReplacePolicy, [parameter(Mandatory = $false)] [string[]] $DependsOn, [parameter(Mandatory = $false)] [VSJson] $Metadata, [parameter(Mandatory = $false)] [UpdatePolicy] $UpdatePolicy, [parameter(Mandatory = $false)] [string] $Condition ) Process { $obj = [LightsailContainer]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'New-VSLightsailContainer' function New-VSLightsailDatabase { <# .SYNOPSIS Adds an AWS::Lightsail::Database resource to the template. .DESCRIPTION Adds an AWS::Lightsail::Database resource to the template. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-lightsail-database.html .PARAMETER LogicalId The logical ID must be alphanumeric (A-Za-z0-9) and unique within the template. Use the logical name to reference the resource in other parts of the template. For example, if you want to map an Amazon Elastic Block Store volume to an Amazon EC2 instance, you reference the logical IDs to associate the block stores with the instance. .PARAMETER RelationalDatabaseName Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-lightsail-database.html#cfn-lightsail-database-relationaldatabasename UpdateType: Immutable PrimitiveType: String .PARAMETER AvailabilityZone Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-lightsail-database.html#cfn-lightsail-database-availabilityzone UpdateType: Immutable PrimitiveType: String .PARAMETER RelationalDatabaseBlueprintId Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-lightsail-database.html#cfn-lightsail-database-relationaldatabaseblueprintid UpdateType: Immutable PrimitiveType: String .PARAMETER RelationalDatabaseBundleId Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-lightsail-database.html#cfn-lightsail-database-relationaldatabasebundleid UpdateType: Immutable PrimitiveType: String .PARAMETER MasterDatabaseName Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-lightsail-database.html#cfn-lightsail-database-masterdatabasename UpdateType: Immutable PrimitiveType: String .PARAMETER MasterUsername Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-lightsail-database.html#cfn-lightsail-database-masterusername UpdateType: Immutable PrimitiveType: String .PARAMETER MasterUserPassword Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-lightsail-database.html#cfn-lightsail-database-masteruserpassword UpdateType: Mutable PrimitiveType: String .PARAMETER PreferredBackupWindow Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-lightsail-database.html#cfn-lightsail-database-preferredbackupwindow UpdateType: Mutable PrimitiveType: String .PARAMETER PreferredMaintenanceWindow Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-lightsail-database.html#cfn-lightsail-database-preferredmaintenancewindow UpdateType: Mutable PrimitiveType: String .PARAMETER PubliclyAccessible Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-lightsail-database.html#cfn-lightsail-database-publiclyaccessible UpdateType: Mutable PrimitiveType: Boolean .PARAMETER CaCertificateIdentifier Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-lightsail-database.html#cfn-lightsail-database-cacertificateidentifier UpdateType: Mutable PrimitiveType: String .PARAMETER BackupRetention Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-lightsail-database.html#cfn-lightsail-database-backupretention UpdateType: Mutable PrimitiveType: Boolean .PARAMETER RotateMasterUserPassword Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-lightsail-database.html#cfn-lightsail-database-rotatemasteruserpassword UpdateType: Mutable PrimitiveType: Boolean .PARAMETER RelationalDatabaseParameters Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-lightsail-database.html#cfn-lightsail-database-relationaldatabaseparameters UpdateType: Mutable Type: List ItemType: RelationalDatabaseParameter DuplicatesAllowed: False .PARAMETER Tags Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-lightsail-database.html#cfn-lightsail-database-tags UpdateType: Mutable Type: List ItemType: Tag DuplicatesAllowed: False .PARAMETER DeletionPolicy With the DeletionPolicy attribute you can preserve or (in some cases) backup a resource when its stack is deleted. You specify a DeletionPolicy attribute for each resource that you want to control. If a resource has no DeletionPolicy attribute, AWS CloudFormation deletes the resource by default. To keep a resource when its stack is deleted, specify Retain for that resource. You can use retain for any resource. For example, you can retain a nested stack, S3 bucket, or EC2 instance so that you can continue to use or modify those resources after you delete their stacks. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER UpdateReplacePolicy Use the UpdateReplacePolicy attribute to retain or (in some cases) backup the existing physical instance of a resource when it is replaced during a stack update operation. When you initiate a stack update, AWS CloudFormation updates resources based on differences between what you submit and the stack's current template and parameters. If you update a resource property that requires that the resource be replaced, AWS CloudFormation recreates the resource during the update. Recreating the resource generates a new physical ID. AWS CloudFormation creates the replacement resource first, and then changes references from other dependent resources to point to the replacement resource. By default, AWS CloudFormation then deletes the old resource. Using the UpdateReplacePolicy, you can specify that AWS CloudFormation retain or (in some cases) create a snapshot of the old resource. For resources that support snapshots, such as AWS::EC2::Volume, specify Snapshot to have AWS CloudFormation create a snapshot before deleting the old resource instance. You can apply the UpdateReplacePolicy attribute to any resource. UpdateReplacePolicy is only executed if you update a resource property whose update behavior is specified as Replacement, thereby causing AWS CloudFormation to replace the old resource with a new one with a new physical ID. For example, if you update the Engine property of an AWS::RDS::DBInstance resource type, AWS CloudFormation creates a new resource and replaces the current DB instance resource with the new one. The UpdateReplacePolicy attribute would then dictate whether AWS CloudFormation deleted, retained, or created a snapshot of the old DB instance. The update behavior for each property of a resource is specified in the reference topic for that resource in the AWS Resource and Property Types Reference. For more information on resource update behavior, see Update Behaviors of Stack Resources. The UpdateReplacePolicy attribute applies to stack updates you perform directly, as well as stack updates performed using change sets. Note Resources that are retained continue to exist and continue to incur applicable charges until you delete those resources. Snapshots that are created with this policy continue to exist and continue to incur applicable charges until you delete those snapshots. UpdateReplacePolicy retains the old physical resource or snapshot, but removes it from AWS CloudFormation's scope. UpdateReplacePolicy differs from the DeletionPolicy attribute in that it only applies to resources replaced during stack updates. Use DeletionPolicy for resources deleted when a stack is deleted, or when the resource definition itself is deleted from the template as part of a stack update. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER DependsOn With the DependsOn attribute you can specify that the creation of a specific resource follows another. When you add a DependsOn attribute to a resource, that resource is created only after the creation of the resource specified in the DependsOn attribute. This parameter takes a string or list of strings representing Logical IDs of resources that must be created prior to this resource being created. .PARAMETER Metadata The Metadata attribute enables you to associate structured data with a resource. By adding a Metadata attribute to a resource, you can add data in JSON or YAML to the resource declaration. In addition, you can use intrinsic functions (such as GetAtt and Ref), parameters, and pseudo parameters within the Metadata attribute to add those interpreted values. This will be returned when describing the resource using AWS CLI. .PARAMETER UpdatePolicy Use the UpdatePolicy attribute to specify how AWS CloudFormation handles updates to the AWS::AutoScaling::AutoScalingGroup resource. AWS CloudFormation invokes one of three update policies depending on the type of change you make or whether a scheduled action is associated with the Auto Scaling group. You must use the "Add-UpdatePolicy" function or the [UpdatePolicy] class here. .PARAMETER Condition Logical ID of the condition that this resource needs to be true in order for this resource to be provisioned. .FUNCTIONALITY Vaporshell #> [OutputType([LightsailDatabase])] [cmdletbinding()] [Diagnostics.CodeAnalysis.SuppressMessageAttribute("PSAvoidUsingPlainTextForPassword","MasterUserPassword")] [Diagnostics.CodeAnalysis.SuppressMessageAttribute("PSAvoidUsingUserNameAndPasswordParams","MasterUserPassword")] [Diagnostics.CodeAnalysis.SuppressMessageAttribute("PSAvoidUsingPlainTextForPassword","RotateMasterUserPassword")] [Diagnostics.CodeAnalysis.SuppressMessageAttribute("PSAvoidUsingUserNameAndPasswordParams","RotateMasterUserPassword")] Param( [parameter(Mandatory = $true,Position = 0)] [ValidateLogicalId()] [string] $LogicalId, [parameter(Mandatory = $true)] [object] $RelationalDatabaseName, [parameter(Mandatory = $false)] [object] $AvailabilityZone, [parameter(Mandatory = $true)] [object] $RelationalDatabaseBlueprintId, [parameter(Mandatory = $true)] [object] $RelationalDatabaseBundleId, [parameter(Mandatory = $true)] [object] $MasterDatabaseName, [parameter(Mandatory = $true)] [object] $MasterUsername, [parameter(Mandatory = $false)] [object] $MasterUserPassword, [parameter(Mandatory = $false)] [object] $PreferredBackupWindow, [parameter(Mandatory = $false)] [object] $PreferredMaintenanceWindow, [parameter(Mandatory = $false)] [object] $PubliclyAccessible, [parameter(Mandatory = $false)] [object] $CaCertificateIdentifier, [parameter(Mandatory = $false)] [object] $BackupRetention, [parameter(Mandatory = $false)] [object] $RotateMasterUserPassword, [parameter(Mandatory = $false)] [object] $RelationalDatabaseParameters, [TransformTag()] [object] [parameter(Mandatory = $false)] $Tags, [parameter()] [DeletionPolicy] $DeletionPolicy, [parameter()] [UpdateReplacePolicy] $UpdateReplacePolicy, [parameter(Mandatory = $false)] [string[]] $DependsOn, [parameter(Mandatory = $false)] [VSJson] $Metadata, [parameter(Mandatory = $false)] [UpdatePolicy] $UpdatePolicy, [parameter(Mandatory = $false)] [string] $Condition ) Process { $obj = [LightsailDatabase]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'New-VSLightsailDatabase' function New-VSLightsailDisk { <# .SYNOPSIS Adds an AWS::Lightsail::Disk resource to the template. .DESCRIPTION Adds an AWS::Lightsail::Disk resource to the template. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-lightsail-disk.html .PARAMETER LogicalId The logical ID must be alphanumeric (A-Za-z0-9) and unique within the template. Use the logical name to reference the resource in other parts of the template. For example, if you want to map an Amazon Elastic Block Store volume to an Amazon EC2 instance, you reference the logical IDs to associate the block stores with the instance. .PARAMETER DiskName Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-lightsail-disk.html#cfn-lightsail-disk-diskname UpdateType: Immutable PrimitiveType: String .PARAMETER AvailabilityZone Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-lightsail-disk.html#cfn-lightsail-disk-availabilityzone UpdateType: Immutable PrimitiveType: String .PARAMETER Tags Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-lightsail-disk.html#cfn-lightsail-disk-tags UpdateType: Mutable Type: List ItemType: Tag DuplicatesAllowed: False .PARAMETER AddOns Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-lightsail-disk.html#cfn-lightsail-disk-addons UpdateType: Mutable Type: List ItemType: AddOn .PARAMETER SizeInGb Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-lightsail-disk.html#cfn-lightsail-disk-sizeingb UpdateType: Immutable PrimitiveType: Integer .PARAMETER DeletionPolicy With the DeletionPolicy attribute you can preserve or (in some cases) backup a resource when its stack is deleted. You specify a DeletionPolicy attribute for each resource that you want to control. If a resource has no DeletionPolicy attribute, AWS CloudFormation deletes the resource by default. To keep a resource when its stack is deleted, specify Retain for that resource. You can use retain for any resource. For example, you can retain a nested stack, S3 bucket, or EC2 instance so that you can continue to use or modify those resources after you delete their stacks. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER UpdateReplacePolicy Use the UpdateReplacePolicy attribute to retain or (in some cases) backup the existing physical instance of a resource when it is replaced during a stack update operation. When you initiate a stack update, AWS CloudFormation updates resources based on differences between what you submit and the stack's current template and parameters. If you update a resource property that requires that the resource be replaced, AWS CloudFormation recreates the resource during the update. Recreating the resource generates a new physical ID. AWS CloudFormation creates the replacement resource first, and then changes references from other dependent resources to point to the replacement resource. By default, AWS CloudFormation then deletes the old resource. Using the UpdateReplacePolicy, you can specify that AWS CloudFormation retain or (in some cases) create a snapshot of the old resource. For resources that support snapshots, such as AWS::EC2::Volume, specify Snapshot to have AWS CloudFormation create a snapshot before deleting the old resource instance. You can apply the UpdateReplacePolicy attribute to any resource. UpdateReplacePolicy is only executed if you update a resource property whose update behavior is specified as Replacement, thereby causing AWS CloudFormation to replace the old resource with a new one with a new physical ID. For example, if you update the Engine property of an AWS::RDS::DBInstance resource type, AWS CloudFormation creates a new resource and replaces the current DB instance resource with the new one. The UpdateReplacePolicy attribute would then dictate whether AWS CloudFormation deleted, retained, or created a snapshot of the old DB instance. The update behavior for each property of a resource is specified in the reference topic for that resource in the AWS Resource and Property Types Reference. For more information on resource update behavior, see Update Behaviors of Stack Resources. The UpdateReplacePolicy attribute applies to stack updates you perform directly, as well as stack updates performed using change sets. Note Resources that are retained continue to exist and continue to incur applicable charges until you delete those resources. Snapshots that are created with this policy continue to exist and continue to incur applicable charges until you delete those snapshots. UpdateReplacePolicy retains the old physical resource or snapshot, but removes it from AWS CloudFormation's scope. UpdateReplacePolicy differs from the DeletionPolicy attribute in that it only applies to resources replaced during stack updates. Use DeletionPolicy for resources deleted when a stack is deleted, or when the resource definition itself is deleted from the template as part of a stack update. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER DependsOn With the DependsOn attribute you can specify that the creation of a specific resource follows another. When you add a DependsOn attribute to a resource, that resource is created only after the creation of the resource specified in the DependsOn attribute. This parameter takes a string or list of strings representing Logical IDs of resources that must be created prior to this resource being created. .PARAMETER Metadata The Metadata attribute enables you to associate structured data with a resource. By adding a Metadata attribute to a resource, you can add data in JSON or YAML to the resource declaration. In addition, you can use intrinsic functions (such as GetAtt and Ref), parameters, and pseudo parameters within the Metadata attribute to add those interpreted values. This will be returned when describing the resource using AWS CLI. .PARAMETER UpdatePolicy Use the UpdatePolicy attribute to specify how AWS CloudFormation handles updates to the AWS::AutoScaling::AutoScalingGroup resource. AWS CloudFormation invokes one of three update policies depending on the type of change you make or whether a scheduled action is associated with the Auto Scaling group. You must use the "Add-UpdatePolicy" function or the [UpdatePolicy] class here. .PARAMETER Condition Logical ID of the condition that this resource needs to be true in order for this resource to be provisioned. .FUNCTIONALITY Vaporshell #> [OutputType([LightsailDisk])] [cmdletbinding()] Param( [parameter(Mandatory = $true,Position = 0)] [ValidateLogicalId()] [string] $LogicalId, [parameter(Mandatory = $true)] [object] $DiskName, [parameter(Mandatory = $false)] [object] $AvailabilityZone, [TransformTag()] [object] [parameter(Mandatory = $false)] $Tags, [parameter(Mandatory = $false)] [object] $AddOns, [parameter(Mandatory = $true)] [object] $SizeInGb, [parameter()] [DeletionPolicy] $DeletionPolicy, [parameter()] [UpdateReplacePolicy] $UpdateReplacePolicy, [parameter(Mandatory = $false)] [string[]] $DependsOn, [parameter(Mandatory = $false)] [VSJson] $Metadata, [parameter(Mandatory = $false)] [UpdatePolicy] $UpdatePolicy, [parameter(Mandatory = $false)] [string] $Condition ) Process { $obj = [LightsailDisk]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'New-VSLightsailDisk' function New-VSLightsailDistribution { <# .SYNOPSIS Adds an AWS::Lightsail::Distribution resource to the template. .DESCRIPTION Adds an AWS::Lightsail::Distribution resource to the template. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-lightsail-distribution.html .PARAMETER LogicalId The logical ID must be alphanumeric (A-Za-z0-9) and unique within the template. Use the logical name to reference the resource in other parts of the template. For example, if you want to map an Amazon Elastic Block Store volume to an Amazon EC2 instance, you reference the logical IDs to associate the block stores with the instance. .PARAMETER DistributionName Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-lightsail-distribution.html#cfn-lightsail-distribution-distributionname UpdateType: Immutable PrimitiveType: String .PARAMETER BundleId Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-lightsail-distribution.html#cfn-lightsail-distribution-bundleid UpdateType: Mutable PrimitiveType: String .PARAMETER IpAddressType Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-lightsail-distribution.html#cfn-lightsail-distribution-ipaddresstype UpdateType: Immutable PrimitiveType: String .PARAMETER CacheBehaviors Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-lightsail-distribution.html#cfn-lightsail-distribution-cachebehaviors UpdateType: Mutable Type: List ItemType: CacheBehaviorPerPath DuplicatesAllowed: False .PARAMETER CacheBehaviorSettings Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-lightsail-distribution.html#cfn-lightsail-distribution-cachebehaviorsettings UpdateType: Mutable Type: CacheSettings .PARAMETER DefaultCacheBehavior Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-lightsail-distribution.html#cfn-lightsail-distribution-defaultcachebehavior UpdateType: Mutable Type: CacheBehavior .PARAMETER Origin Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-lightsail-distribution.html#cfn-lightsail-distribution-origin UpdateType: Mutable Type: InputOrigin .PARAMETER IsEnabled Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-lightsail-distribution.html#cfn-lightsail-distribution-isenabled UpdateType: Mutable PrimitiveType: Boolean .PARAMETER CertificateName Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-lightsail-distribution.html#cfn-lightsail-distribution-certificatename UpdateType: Mutable PrimitiveType: String .PARAMETER Tags Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-lightsail-distribution.html#cfn-lightsail-distribution-tags UpdateType: Mutable Type: List ItemType: Tag DuplicatesAllowed: False .PARAMETER DeletionPolicy With the DeletionPolicy attribute you can preserve or (in some cases) backup a resource when its stack is deleted. You specify a DeletionPolicy attribute for each resource that you want to control. If a resource has no DeletionPolicy attribute, AWS CloudFormation deletes the resource by default. To keep a resource when its stack is deleted, specify Retain for that resource. You can use retain for any resource. For example, you can retain a nested stack, S3 bucket, or EC2 instance so that you can continue to use or modify those resources after you delete their stacks. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER UpdateReplacePolicy Use the UpdateReplacePolicy attribute to retain or (in some cases) backup the existing physical instance of a resource when it is replaced during a stack update operation. When you initiate a stack update, AWS CloudFormation updates resources based on differences between what you submit and the stack's current template and parameters. If you update a resource property that requires that the resource be replaced, AWS CloudFormation recreates the resource during the update. Recreating the resource generates a new physical ID. AWS CloudFormation creates the replacement resource first, and then changes references from other dependent resources to point to the replacement resource. By default, AWS CloudFormation then deletes the old resource. Using the UpdateReplacePolicy, you can specify that AWS CloudFormation retain or (in some cases) create a snapshot of the old resource. For resources that support snapshots, such as AWS::EC2::Volume, specify Snapshot to have AWS CloudFormation create a snapshot before deleting the old resource instance. You can apply the UpdateReplacePolicy attribute to any resource. UpdateReplacePolicy is only executed if you update a resource property whose update behavior is specified as Replacement, thereby causing AWS CloudFormation to replace the old resource with a new one with a new physical ID. For example, if you update the Engine property of an AWS::RDS::DBInstance resource type, AWS CloudFormation creates a new resource and replaces the current DB instance resource with the new one. The UpdateReplacePolicy attribute would then dictate whether AWS CloudFormation deleted, retained, or created a snapshot of the old DB instance. The update behavior for each property of a resource is specified in the reference topic for that resource in the AWS Resource and Property Types Reference. For more information on resource update behavior, see Update Behaviors of Stack Resources. The UpdateReplacePolicy attribute applies to stack updates you perform directly, as well as stack updates performed using change sets. Note Resources that are retained continue to exist and continue to incur applicable charges until you delete those resources. Snapshots that are created with this policy continue to exist and continue to incur applicable charges until you delete those snapshots. UpdateReplacePolicy retains the old physical resource or snapshot, but removes it from AWS CloudFormation's scope. UpdateReplacePolicy differs from the DeletionPolicy attribute in that it only applies to resources replaced during stack updates. Use DeletionPolicy for resources deleted when a stack is deleted, or when the resource definition itself is deleted from the template as part of a stack update. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER DependsOn With the DependsOn attribute you can specify that the creation of a specific resource follows another. When you add a DependsOn attribute to a resource, that resource is created only after the creation of the resource specified in the DependsOn attribute. This parameter takes a string or list of strings representing Logical IDs of resources that must be created prior to this resource being created. .PARAMETER Metadata The Metadata attribute enables you to associate structured data with a resource. By adding a Metadata attribute to a resource, you can add data in JSON or YAML to the resource declaration. In addition, you can use intrinsic functions (such as GetAtt and Ref), parameters, and pseudo parameters within the Metadata attribute to add those interpreted values. This will be returned when describing the resource using AWS CLI. .PARAMETER UpdatePolicy Use the UpdatePolicy attribute to specify how AWS CloudFormation handles updates to the AWS::AutoScaling::AutoScalingGroup resource. AWS CloudFormation invokes one of three update policies depending on the type of change you make or whether a scheduled action is associated with the Auto Scaling group. You must use the "Add-UpdatePolicy" function or the [UpdatePolicy] class here. .PARAMETER Condition Logical ID of the condition that this resource needs to be true in order for this resource to be provisioned. .FUNCTIONALITY Vaporshell #> [OutputType([LightsailDistribution])] [cmdletbinding()] Param( [parameter(Mandatory = $true,Position = 0)] [ValidateLogicalId()] [string] $LogicalId, [parameter(Mandatory = $true)] [object] $DistributionName, [parameter(Mandatory = $true)] [object] $BundleId, [parameter(Mandatory = $false)] [object] $IpAddressType, [parameter(Mandatory = $false)] [object] $CacheBehaviors, [parameter(Mandatory = $false)] $CacheBehaviorSettings, [parameter(Mandatory = $true)] $DefaultCacheBehavior, [parameter(Mandatory = $true)] $Origin, [parameter(Mandatory = $false)] [object] $IsEnabled, [parameter(Mandatory = $false)] [object] $CertificateName, [TransformTag()] [object] [parameter(Mandatory = $false)] $Tags, [parameter()] [DeletionPolicy] $DeletionPolicy, [parameter()] [UpdateReplacePolicy] $UpdateReplacePolicy, [parameter(Mandatory = $false)] [string[]] $DependsOn, [parameter(Mandatory = $false)] [VSJson] $Metadata, [parameter(Mandatory = $false)] [UpdatePolicy] $UpdatePolicy, [parameter(Mandatory = $false)] [string] $Condition ) Process { $obj = [LightsailDistribution]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'New-VSLightsailDistribution' function New-VSLightsailInstance { <# .SYNOPSIS Adds an AWS::Lightsail::Instance resource to the template. .DESCRIPTION Adds an AWS::Lightsail::Instance resource to the template. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-lightsail-instance.html .PARAMETER LogicalId The logical ID must be alphanumeric (A-Za-z0-9) and unique within the template. Use the logical name to reference the resource in other parts of the template. For example, if you want to map an Amazon Elastic Block Store volume to an Amazon EC2 instance, you reference the logical IDs to associate the block stores with the instance. .PARAMETER Hardware Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-lightsail-instance.html#cfn-lightsail-instance-hardware UpdateType: Mutable Type: Hardware .PARAMETER Networking Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-lightsail-instance.html#cfn-lightsail-instance-networking UpdateType: Mutable Type: Networking .PARAMETER InstanceName Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-lightsail-instance.html#cfn-lightsail-instance-instancename UpdateType: Immutable PrimitiveType: String .PARAMETER AvailabilityZone Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-lightsail-instance.html#cfn-lightsail-instance-availabilityzone UpdateType: Immutable PrimitiveType: String .PARAMETER BundleId Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-lightsail-instance.html#cfn-lightsail-instance-bundleid UpdateType: Immutable PrimitiveType: String .PARAMETER BlueprintId Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-lightsail-instance.html#cfn-lightsail-instance-blueprintid UpdateType: Immutable PrimitiveType: String .PARAMETER AddOns Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-lightsail-instance.html#cfn-lightsail-instance-addons UpdateType: Mutable Type: List ItemType: AddOn .PARAMETER UserData Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-lightsail-instance.html#cfn-lightsail-instance-userdata UpdateType: Mutable PrimitiveType: String .PARAMETER KeyPairName Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-lightsail-instance.html#cfn-lightsail-instance-keypairname UpdateType: Mutable PrimitiveType: String .PARAMETER Tags Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-lightsail-instance.html#cfn-lightsail-instance-tags UpdateType: Mutable Type: List ItemType: Tag DuplicatesAllowed: False .PARAMETER DeletionPolicy With the DeletionPolicy attribute you can preserve or (in some cases) backup a resource when its stack is deleted. You specify a DeletionPolicy attribute for each resource that you want to control. If a resource has no DeletionPolicy attribute, AWS CloudFormation deletes the resource by default. To keep a resource when its stack is deleted, specify Retain for that resource. You can use retain for any resource. For example, you can retain a nested stack, S3 bucket, or EC2 instance so that you can continue to use or modify those resources after you delete their stacks. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER UpdateReplacePolicy Use the UpdateReplacePolicy attribute to retain or (in some cases) backup the existing physical instance of a resource when it is replaced during a stack update operation. When you initiate a stack update, AWS CloudFormation updates resources based on differences between what you submit and the stack's current template and parameters. If you update a resource property that requires that the resource be replaced, AWS CloudFormation recreates the resource during the update. Recreating the resource generates a new physical ID. AWS CloudFormation creates the replacement resource first, and then changes references from other dependent resources to point to the replacement resource. By default, AWS CloudFormation then deletes the old resource. Using the UpdateReplacePolicy, you can specify that AWS CloudFormation retain or (in some cases) create a snapshot of the old resource. For resources that support snapshots, such as AWS::EC2::Volume, specify Snapshot to have AWS CloudFormation create a snapshot before deleting the old resource instance. You can apply the UpdateReplacePolicy attribute to any resource. UpdateReplacePolicy is only executed if you update a resource property whose update behavior is specified as Replacement, thereby causing AWS CloudFormation to replace the old resource with a new one with a new physical ID. For example, if you update the Engine property of an AWS::RDS::DBInstance resource type, AWS CloudFormation creates a new resource and replaces the current DB instance resource with the new one. The UpdateReplacePolicy attribute would then dictate whether AWS CloudFormation deleted, retained, or created a snapshot of the old DB instance. The update behavior for each property of a resource is specified in the reference topic for that resource in the AWS Resource and Property Types Reference. For more information on resource update behavior, see Update Behaviors of Stack Resources. The UpdateReplacePolicy attribute applies to stack updates you perform directly, as well as stack updates performed using change sets. Note Resources that are retained continue to exist and continue to incur applicable charges until you delete those resources. Snapshots that are created with this policy continue to exist and continue to incur applicable charges until you delete those snapshots. UpdateReplacePolicy retains the old physical resource or snapshot, but removes it from AWS CloudFormation's scope. UpdateReplacePolicy differs from the DeletionPolicy attribute in that it only applies to resources replaced during stack updates. Use DeletionPolicy for resources deleted when a stack is deleted, or when the resource definition itself is deleted from the template as part of a stack update. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER DependsOn With the DependsOn attribute you can specify that the creation of a specific resource follows another. When you add a DependsOn attribute to a resource, that resource is created only after the creation of the resource specified in the DependsOn attribute. This parameter takes a string or list of strings representing Logical IDs of resources that must be created prior to this resource being created. .PARAMETER Metadata The Metadata attribute enables you to associate structured data with a resource. By adding a Metadata attribute to a resource, you can add data in JSON or YAML to the resource declaration. In addition, you can use intrinsic functions (such as GetAtt and Ref), parameters, and pseudo parameters within the Metadata attribute to add those interpreted values. This will be returned when describing the resource using AWS CLI. .PARAMETER UpdatePolicy Use the UpdatePolicy attribute to specify how AWS CloudFormation handles updates to the AWS::AutoScaling::AutoScalingGroup resource. AWS CloudFormation invokes one of three update policies depending on the type of change you make or whether a scheduled action is associated with the Auto Scaling group. You must use the "Add-UpdatePolicy" function or the [UpdatePolicy] class here. .PARAMETER Condition Logical ID of the condition that this resource needs to be true in order for this resource to be provisioned. .FUNCTIONALITY Vaporshell #> [OutputType([LightsailInstance])] [cmdletbinding()] Param( [parameter(Mandatory = $true,Position = 0)] [ValidateLogicalId()] [string] $LogicalId, [parameter(Mandatory = $false)] $Hardware, [parameter(Mandatory = $false)] $Networking, [parameter(Mandatory = $true)] [object] $InstanceName, [parameter(Mandatory = $false)] [object] $AvailabilityZone, [parameter(Mandatory = $true)] [object] $BundleId, [parameter(Mandatory = $true)] [object] $BlueprintId, [parameter(Mandatory = $false)] [object] $AddOns, [parameter(Mandatory = $false)] [TransformUserData()] [UserData] $UserData, [parameter(Mandatory = $false)] [object] $KeyPairName, [TransformTag()] [object] [parameter(Mandatory = $false)] $Tags, [parameter()] [DeletionPolicy] $DeletionPolicy, [parameter()] [UpdateReplacePolicy] $UpdateReplacePolicy, [parameter(Mandatory = $false)] [string[]] $DependsOn, [parameter(Mandatory = $false)] [VSJson] $Metadata, [parameter(Mandatory = $false)] [UpdatePolicy] $UpdatePolicy, [parameter(Mandatory = $false)] [string] $Condition ) Process { $obj = [LightsailInstance]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'New-VSLightsailInstance' function New-VSLightsailLoadBalancer { <# .SYNOPSIS Adds an AWS::Lightsail::LoadBalancer resource to the template. .DESCRIPTION Adds an AWS::Lightsail::LoadBalancer resource to the template. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-lightsail-loadbalancer.html .PARAMETER LogicalId The logical ID must be alphanumeric (A-Za-z0-9) and unique within the template. Use the logical name to reference the resource in other parts of the template. For example, if you want to map an Amazon Elastic Block Store volume to an Amazon EC2 instance, you reference the logical IDs to associate the block stores with the instance. .PARAMETER LoadBalancerName Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-lightsail-loadbalancer.html#cfn-lightsail-loadbalancer-loadbalancername UpdateType: Immutable PrimitiveType: String .PARAMETER InstancePort Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-lightsail-loadbalancer.html#cfn-lightsail-loadbalancer-instanceport UpdateType: Immutable PrimitiveType: Integer .PARAMETER IpAddressType Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-lightsail-loadbalancer.html#cfn-lightsail-loadbalancer-ipaddresstype UpdateType: Immutable PrimitiveType: String .PARAMETER AttachedInstances Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-lightsail-loadbalancer.html#cfn-lightsail-loadbalancer-attachedinstances UpdateType: Mutable Type: List PrimitiveItemType: String DuplicatesAllowed: False .PARAMETER HealthCheckPath Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-lightsail-loadbalancer.html#cfn-lightsail-loadbalancer-healthcheckpath UpdateType: Mutable PrimitiveType: String .PARAMETER SessionStickinessEnabled Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-lightsail-loadbalancer.html#cfn-lightsail-loadbalancer-sessionstickinessenabled UpdateType: Mutable PrimitiveType: Boolean .PARAMETER SessionStickinessLBCookieDurationSeconds Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-lightsail-loadbalancer.html#cfn-lightsail-loadbalancer-sessionstickinesslbcookiedurationseconds UpdateType: Mutable PrimitiveType: String .PARAMETER Tags Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-lightsail-loadbalancer.html#cfn-lightsail-loadbalancer-tags UpdateType: Mutable Type: List ItemType: Tag DuplicatesAllowed: False .PARAMETER DeletionPolicy With the DeletionPolicy attribute you can preserve or (in some cases) backup a resource when its stack is deleted. You specify a DeletionPolicy attribute for each resource that you want to control. If a resource has no DeletionPolicy attribute, AWS CloudFormation deletes the resource by default. To keep a resource when its stack is deleted, specify Retain for that resource. You can use retain for any resource. For example, you can retain a nested stack, S3 bucket, or EC2 instance so that you can continue to use or modify those resources after you delete their stacks. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER UpdateReplacePolicy Use the UpdateReplacePolicy attribute to retain or (in some cases) backup the existing physical instance of a resource when it is replaced during a stack update operation. When you initiate a stack update, AWS CloudFormation updates resources based on differences between what you submit and the stack's current template and parameters. If you update a resource property that requires that the resource be replaced, AWS CloudFormation recreates the resource during the update. Recreating the resource generates a new physical ID. AWS CloudFormation creates the replacement resource first, and then changes references from other dependent resources to point to the replacement resource. By default, AWS CloudFormation then deletes the old resource. Using the UpdateReplacePolicy, you can specify that AWS CloudFormation retain or (in some cases) create a snapshot of the old resource. For resources that support snapshots, such as AWS::EC2::Volume, specify Snapshot to have AWS CloudFormation create a snapshot before deleting the old resource instance. You can apply the UpdateReplacePolicy attribute to any resource. UpdateReplacePolicy is only executed if you update a resource property whose update behavior is specified as Replacement, thereby causing AWS CloudFormation to replace the old resource with a new one with a new physical ID. For example, if you update the Engine property of an AWS::RDS::DBInstance resource type, AWS CloudFormation creates a new resource and replaces the current DB instance resource with the new one. The UpdateReplacePolicy attribute would then dictate whether AWS CloudFormation deleted, retained, or created a snapshot of the old DB instance. The update behavior for each property of a resource is specified in the reference topic for that resource in the AWS Resource and Property Types Reference. For more information on resource update behavior, see Update Behaviors of Stack Resources. The UpdateReplacePolicy attribute applies to stack updates you perform directly, as well as stack updates performed using change sets. Note Resources that are retained continue to exist and continue to incur applicable charges until you delete those resources. Snapshots that are created with this policy continue to exist and continue to incur applicable charges until you delete those snapshots. UpdateReplacePolicy retains the old physical resource or snapshot, but removes it from AWS CloudFormation's scope. UpdateReplacePolicy differs from the DeletionPolicy attribute in that it only applies to resources replaced during stack updates. Use DeletionPolicy for resources deleted when a stack is deleted, or when the resource definition itself is deleted from the template as part of a stack update. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER DependsOn With the DependsOn attribute you can specify that the creation of a specific resource follows another. When you add a DependsOn attribute to a resource, that resource is created only after the creation of the resource specified in the DependsOn attribute. This parameter takes a string or list of strings representing Logical IDs of resources that must be created prior to this resource being created. .PARAMETER Metadata The Metadata attribute enables you to associate structured data with a resource. By adding a Metadata attribute to a resource, you can add data in JSON or YAML to the resource declaration. In addition, you can use intrinsic functions (such as GetAtt and Ref), parameters, and pseudo parameters within the Metadata attribute to add those interpreted values. This will be returned when describing the resource using AWS CLI. .PARAMETER UpdatePolicy Use the UpdatePolicy attribute to specify how AWS CloudFormation handles updates to the AWS::AutoScaling::AutoScalingGroup resource. AWS CloudFormation invokes one of three update policies depending on the type of change you make or whether a scheduled action is associated with the Auto Scaling group. You must use the "Add-UpdatePolicy" function or the [UpdatePolicy] class here. .PARAMETER Condition Logical ID of the condition that this resource needs to be true in order for this resource to be provisioned. .FUNCTIONALITY Vaporshell #> [OutputType([LightsailLoadBalancer])] [cmdletbinding()] Param( [parameter(Mandatory = $true,Position = 0)] [ValidateLogicalId()] [string] $LogicalId, [parameter(Mandatory = $true)] [object] $LoadBalancerName, [parameter(Mandatory = $true)] [object] $InstancePort, [parameter(Mandatory = $false)] [object] $IpAddressType, [parameter(Mandatory = $false)] $AttachedInstances, [parameter(Mandatory = $false)] [object] $HealthCheckPath, [parameter(Mandatory = $false)] [object] $SessionStickinessEnabled, [parameter(Mandatory = $false)] [object] $SessionStickinessLBCookieDurationSeconds, [TransformTag()] [object] [parameter(Mandatory = $false)] $Tags, [parameter()] [DeletionPolicy] $DeletionPolicy, [parameter()] [UpdateReplacePolicy] $UpdateReplacePolicy, [parameter(Mandatory = $false)] [string[]] $DependsOn, [parameter(Mandatory = $false)] [VSJson] $Metadata, [parameter(Mandatory = $false)] [UpdatePolicy] $UpdatePolicy, [parameter(Mandatory = $false)] [string] $Condition ) Process { $obj = [LightsailLoadBalancer]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'New-VSLightsailLoadBalancer' function New-VSLightsailLoadBalancerTlsCertificate { <# .SYNOPSIS Adds an AWS::Lightsail::LoadBalancerTlsCertificate resource to the template. .DESCRIPTION Adds an AWS::Lightsail::LoadBalancerTlsCertificate resource to the template. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-lightsail-loadbalancertlscertificate.html .PARAMETER LogicalId The logical ID must be alphanumeric (A-Za-z0-9) and unique within the template. Use the logical name to reference the resource in other parts of the template. For example, if you want to map an Amazon Elastic Block Store volume to an Amazon EC2 instance, you reference the logical IDs to associate the block stores with the instance. .PARAMETER LoadBalancerName Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-lightsail-loadbalancertlscertificate.html#cfn-lightsail-loadbalancertlscertificate-loadbalancername UpdateType: Immutable PrimitiveType: String .PARAMETER CertificateName Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-lightsail-loadbalancertlscertificate.html#cfn-lightsail-loadbalancertlscertificate-certificatename UpdateType: Immutable PrimitiveType: String .PARAMETER CertificateDomainName Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-lightsail-loadbalancertlscertificate.html#cfn-lightsail-loadbalancertlscertificate-certificatedomainname UpdateType: Immutable PrimitiveType: String .PARAMETER CertificateAlternativeNames Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-lightsail-loadbalancertlscertificate.html#cfn-lightsail-loadbalancertlscertificate-certificatealternativenames UpdateType: Immutable Type: List PrimitiveItemType: String DuplicatesAllowed: False .PARAMETER IsAttached Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-lightsail-loadbalancertlscertificate.html#cfn-lightsail-loadbalancertlscertificate-isattached UpdateType: Mutable PrimitiveType: Boolean .PARAMETER DeletionPolicy With the DeletionPolicy attribute you can preserve or (in some cases) backup a resource when its stack is deleted. You specify a DeletionPolicy attribute for each resource that you want to control. If a resource has no DeletionPolicy attribute, AWS CloudFormation deletes the resource by default. To keep a resource when its stack is deleted, specify Retain for that resource. You can use retain for any resource. For example, you can retain a nested stack, S3 bucket, or EC2 instance so that you can continue to use or modify those resources after you delete their stacks. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER UpdateReplacePolicy Use the UpdateReplacePolicy attribute to retain or (in some cases) backup the existing physical instance of a resource when it is replaced during a stack update operation. When you initiate a stack update, AWS CloudFormation updates resources based on differences between what you submit and the stack's current template and parameters. If you update a resource property that requires that the resource be replaced, AWS CloudFormation recreates the resource during the update. Recreating the resource generates a new physical ID. AWS CloudFormation creates the replacement resource first, and then changes references from other dependent resources to point to the replacement resource. By default, AWS CloudFormation then deletes the old resource. Using the UpdateReplacePolicy, you can specify that AWS CloudFormation retain or (in some cases) create a snapshot of the old resource. For resources that support snapshots, such as AWS::EC2::Volume, specify Snapshot to have AWS CloudFormation create a snapshot before deleting the old resource instance. You can apply the UpdateReplacePolicy attribute to any resource. UpdateReplacePolicy is only executed if you update a resource property whose update behavior is specified as Replacement, thereby causing AWS CloudFormation to replace the old resource with a new one with a new physical ID. For example, if you update the Engine property of an AWS::RDS::DBInstance resource type, AWS CloudFormation creates a new resource and replaces the current DB instance resource with the new one. The UpdateReplacePolicy attribute would then dictate whether AWS CloudFormation deleted, retained, or created a snapshot of the old DB instance. The update behavior for each property of a resource is specified in the reference topic for that resource in the AWS Resource and Property Types Reference. For more information on resource update behavior, see Update Behaviors of Stack Resources. The UpdateReplacePolicy attribute applies to stack updates you perform directly, as well as stack updates performed using change sets. Note Resources that are retained continue to exist and continue to incur applicable charges until you delete those resources. Snapshots that are created with this policy continue to exist and continue to incur applicable charges until you delete those snapshots. UpdateReplacePolicy retains the old physical resource or snapshot, but removes it from AWS CloudFormation's scope. UpdateReplacePolicy differs from the DeletionPolicy attribute in that it only applies to resources replaced during stack updates. Use DeletionPolicy for resources deleted when a stack is deleted, or when the resource definition itself is deleted from the template as part of a stack update. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER DependsOn With the DependsOn attribute you can specify that the creation of a specific resource follows another. When you add a DependsOn attribute to a resource, that resource is created only after the creation of the resource specified in the DependsOn attribute. This parameter takes a string or list of strings representing Logical IDs of resources that must be created prior to this resource being created. .PARAMETER Metadata The Metadata attribute enables you to associate structured data with a resource. By adding a Metadata attribute to a resource, you can add data in JSON or YAML to the resource declaration. In addition, you can use intrinsic functions (such as GetAtt and Ref), parameters, and pseudo parameters within the Metadata attribute to add those interpreted values. This will be returned when describing the resource using AWS CLI. .PARAMETER UpdatePolicy Use the UpdatePolicy attribute to specify how AWS CloudFormation handles updates to the AWS::AutoScaling::AutoScalingGroup resource. AWS CloudFormation invokes one of three update policies depending on the type of change you make or whether a scheduled action is associated with the Auto Scaling group. You must use the "Add-UpdatePolicy" function or the [UpdatePolicy] class here. .PARAMETER Condition Logical ID of the condition that this resource needs to be true in order for this resource to be provisioned. .FUNCTIONALITY Vaporshell #> [OutputType([LightsailLoadBalancerTlsCertificate])] [cmdletbinding()] Param( [parameter(Mandatory = $true,Position = 0)] [ValidateLogicalId()] [string] $LogicalId, [parameter(Mandatory = $true)] [object] $LoadBalancerName, [parameter(Mandatory = $true)] [object] $CertificateName, [parameter(Mandatory = $true)] [object] $CertificateDomainName, [parameter(Mandatory = $false)] $CertificateAlternativeNames, [parameter(Mandatory = $false)] [object] $IsAttached, [parameter()] [DeletionPolicy] $DeletionPolicy, [parameter()] [UpdateReplacePolicy] $UpdateReplacePolicy, [parameter(Mandatory = $false)] [string[]] $DependsOn, [parameter(Mandatory = $false)] [VSJson] $Metadata, [parameter(Mandatory = $false)] [UpdatePolicy] $UpdatePolicy, [parameter(Mandatory = $false)] [string] $Condition ) Process { $obj = [LightsailLoadBalancerTlsCertificate]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'New-VSLightsailLoadBalancerTlsCertificate' function New-VSLightsailStaticIp { <# .SYNOPSIS Adds an AWS::Lightsail::StaticIp resource to the template. .DESCRIPTION Adds an AWS::Lightsail::StaticIp resource to the template. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-lightsail-staticip.html .PARAMETER LogicalId The logical ID must be alphanumeric (A-Za-z0-9) and unique within the template. Use the logical name to reference the resource in other parts of the template. For example, if you want to map an Amazon Elastic Block Store volume to an Amazon EC2 instance, you reference the logical IDs to associate the block stores with the instance. .PARAMETER StaticIpName Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-lightsail-staticip.html#cfn-lightsail-staticip-staticipname UpdateType: Immutable PrimitiveType: String .PARAMETER AttachedTo Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-lightsail-staticip.html#cfn-lightsail-staticip-attachedto UpdateType: Mutable PrimitiveType: String .PARAMETER DeletionPolicy With the DeletionPolicy attribute you can preserve or (in some cases) backup a resource when its stack is deleted. You specify a DeletionPolicy attribute for each resource that you want to control. If a resource has no DeletionPolicy attribute, AWS CloudFormation deletes the resource by default. To keep a resource when its stack is deleted, specify Retain for that resource. You can use retain for any resource. For example, you can retain a nested stack, S3 bucket, or EC2 instance so that you can continue to use or modify those resources after you delete their stacks. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER UpdateReplacePolicy Use the UpdateReplacePolicy attribute to retain or (in some cases) backup the existing physical instance of a resource when it is replaced during a stack update operation. When you initiate a stack update, AWS CloudFormation updates resources based on differences between what you submit and the stack's current template and parameters. If you update a resource property that requires that the resource be replaced, AWS CloudFormation recreates the resource during the update. Recreating the resource generates a new physical ID. AWS CloudFormation creates the replacement resource first, and then changes references from other dependent resources to point to the replacement resource. By default, AWS CloudFormation then deletes the old resource. Using the UpdateReplacePolicy, you can specify that AWS CloudFormation retain or (in some cases) create a snapshot of the old resource. For resources that support snapshots, such as AWS::EC2::Volume, specify Snapshot to have AWS CloudFormation create a snapshot before deleting the old resource instance. You can apply the UpdateReplacePolicy attribute to any resource. UpdateReplacePolicy is only executed if you update a resource property whose update behavior is specified as Replacement, thereby causing AWS CloudFormation to replace the old resource with a new one with a new physical ID. For example, if you update the Engine property of an AWS::RDS::DBInstance resource type, AWS CloudFormation creates a new resource and replaces the current DB instance resource with the new one. The UpdateReplacePolicy attribute would then dictate whether AWS CloudFormation deleted, retained, or created a snapshot of the old DB instance. The update behavior for each property of a resource is specified in the reference topic for that resource in the AWS Resource and Property Types Reference. For more information on resource update behavior, see Update Behaviors of Stack Resources. The UpdateReplacePolicy attribute applies to stack updates you perform directly, as well as stack updates performed using change sets. Note Resources that are retained continue to exist and continue to incur applicable charges until you delete those resources. Snapshots that are created with this policy continue to exist and continue to incur applicable charges until you delete those snapshots. UpdateReplacePolicy retains the old physical resource or snapshot, but removes it from AWS CloudFormation's scope. UpdateReplacePolicy differs from the DeletionPolicy attribute in that it only applies to resources replaced during stack updates. Use DeletionPolicy for resources deleted when a stack is deleted, or when the resource definition itself is deleted from the template as part of a stack update. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER DependsOn With the DependsOn attribute you can specify that the creation of a specific resource follows another. When you add a DependsOn attribute to a resource, that resource is created only after the creation of the resource specified in the DependsOn attribute. This parameter takes a string or list of strings representing Logical IDs of resources that must be created prior to this resource being created. .PARAMETER Metadata The Metadata attribute enables you to associate structured data with a resource. By adding a Metadata attribute to a resource, you can add data in JSON or YAML to the resource declaration. In addition, you can use intrinsic functions (such as GetAtt and Ref), parameters, and pseudo parameters within the Metadata attribute to add those interpreted values. This will be returned when describing the resource using AWS CLI. .PARAMETER UpdatePolicy Use the UpdatePolicy attribute to specify how AWS CloudFormation handles updates to the AWS::AutoScaling::AutoScalingGroup resource. AWS CloudFormation invokes one of three update policies depending on the type of change you make or whether a scheduled action is associated with the Auto Scaling group. You must use the "Add-UpdatePolicy" function or the [UpdatePolicy] class here. .PARAMETER Condition Logical ID of the condition that this resource needs to be true in order for this resource to be provisioned. .FUNCTIONALITY Vaporshell #> [OutputType([LightsailStaticIp])] [cmdletbinding()] Param( [parameter(Mandatory = $true,Position = 0)] [ValidateLogicalId()] [string] $LogicalId, [parameter(Mandatory = $true)] [object] $StaticIpName, [parameter(Mandatory = $false)] [object] $AttachedTo, [parameter()] [DeletionPolicy] $DeletionPolicy, [parameter()] [UpdateReplacePolicy] $UpdateReplacePolicy, [parameter(Mandatory = $false)] [string[]] $DependsOn, [parameter(Mandatory = $false)] [VSJson] $Metadata, [parameter(Mandatory = $false)] [UpdatePolicy] $UpdatePolicy, [parameter(Mandatory = $false)] [string] $Condition ) Process { $obj = [LightsailStaticIp]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'New-VSLightsailStaticIp' |