VaporShell.IoTWireless.psm1
|
# PSM1 Contents function Format-Json { [CmdletBinding()] Param ( [Parameter(Mandatory = $true, Position = 0, ValueFromPipeline = $true)] [String] $Json ) Begin { $cleaner = { param([String]$Line) Process{ [Regex]::Replace( $Line, "\\u(?<Value>[a-zA-Z0-9]{4})", { param($m)([char]([int]::Parse( $m.Groups['Value'].Value, [System.Globalization.NumberStyles]::HexNumber ))).ToString() } ) } } } Process { if ($PSVersionTable.PSVersion.Major -lt 6) { try { $indent = 0; $res = $Json -split '\n' | ForEach-Object { if ($_ -match '[\}\]]') { # This line contains ] or }, decrement the indentation level $indent-- } $line = (' ' * $indent * 2) + $_.TrimStart().Replace(': ', ': ') if ($_ -match '[\{\[]') { # This line contains [ or {, increment the indentation level $indent++ } $cleaner.Invoke($line) } $res -join "`n" } catch { ($Json -split '\n' | ForEach-Object {$cleaner.Invoke($_)}) -join "`n" } } else { ($Json -split '\n' | ForEach-Object {$cleaner.Invoke($_)}) -join "`n" } } } function Get-TrueCount { Param ( [parameter(Mandatory = $false,Position = 0,ValueFromPipeline = $true)] $Array ) Process { if ($array) { if ($array.Count) { $count = $array.Count } else { $count = 1 } } else { $count = 0 } } End { return $count } } function New-VSError { <# .SYNOPSIS Error generator function to use in tandem with $PSCmdlet.ThrowTerminatingError() .PARAMETER Result Allows input of an error from AWS SDK, resulting in the Exception message being parsed out. .PARAMETER String Used to create basic String message errors in the same wrapper #> [cmdletbinding(DefaultParameterSetName="Result")] param( [parameter(Position=0,ParameterSetName="Result")] $Result, [parameter(Position=0,ParameterSetName="String")] $String ) switch ($PSCmdlet.ParameterSetName) { Result { $Exception = "$($result.Exception.InnerException.Message)" } String { $Exception = "$String" } } $e = New-Object "System.Exception" $Exception $errorRecord = New-Object 'System.Management.Automation.ErrorRecord' $e, $null, ([System.Management.Automation.ErrorCategory]::InvalidOperation), $null return $errorRecord } function ResolveS3Endpoint { <# .SYNOPSIS Resolves the S3 endpoint most appropriate for each region. #> Param ( [parameter(Mandatory=$true,Position=0)] [ValidateSet("eu-west-2","ap-south-1","us-east-2","sa-east-1","us-west-1","us-west-2","eu-west-1","ap-southeast-2","ca-central-1","ap-northeast-2","us-east-1","eu-central-1","ap-southeast-1","ap-northeast-1")] [String] $Region ) $endpointMap = @{ "us-east-2" = "s3.us-east-2.amazonaws.com" "us-east-1" = "s3.amazonaws.com" "us-west-1" = "s3-us-west-1.amazonaws.com" "us-west-2" = "s3-us-west-2.amazonaws.com" "ca-central-1" = "s3.ca-central-1.amazonaws.com" "ap-south-1" = "s3.ap-south-1.amazonaws.com" "ap-northeast-2" = "s3.ap-northeast-2.amazonaws.com" "ap-southeast-1" = "s3-ap-southeast-1.amazonaws.com" "ap-southeast-2" = "s3-ap-southeast-2.amazonaws.com" "ap-northeast-1" = "s3-ap-northeast-1.amazonaws.com" "eu-central-1" = "s3.eu-central-1.amazonaws.com" "eu-west-1" = "s3-eu-west-1.amazonaws.com" "eu-west-2" = "s3.eu-west-2.amazonaws.com" "sa-east-1" = "s3-sa-east-1.amazonaws.com" } return $endpointMap[$Region] } function Add-VSIoTWirelessDeviceProfileLoRaWANDeviceProfile { <# .SYNOPSIS Adds an AWS::IoTWireless::DeviceProfile.LoRaWANDeviceProfile resource property to the template. .DESCRIPTION Adds an AWS::IoTWireless::DeviceProfile.LoRaWANDeviceProfile resource property to the template. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-iotwireless-deviceprofile-lorawandeviceprofile.html .PARAMETER SupportsClassB Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-iotwireless-deviceprofile-lorawandeviceprofile.html#cfn-iotwireless-deviceprofile-lorawandeviceprofile-supportsclassb UpdateType: Mutable PrimitiveType: Boolean .PARAMETER ClassBTimeout Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-iotwireless-deviceprofile-lorawandeviceprofile.html#cfn-iotwireless-deviceprofile-lorawandeviceprofile-classbtimeout UpdateType: Mutable PrimitiveType: Integer .PARAMETER PingSlotPeriod Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-iotwireless-deviceprofile-lorawandeviceprofile.html#cfn-iotwireless-deviceprofile-lorawandeviceprofile-pingslotperiod UpdateType: Mutable PrimitiveType: Integer .PARAMETER PingSlotDr Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-iotwireless-deviceprofile-lorawandeviceprofile.html#cfn-iotwireless-deviceprofile-lorawandeviceprofile-pingslotdr UpdateType: Mutable PrimitiveType: Integer .PARAMETER PingSlotFreq Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-iotwireless-deviceprofile-lorawandeviceprofile.html#cfn-iotwireless-deviceprofile-lorawandeviceprofile-pingslotfreq UpdateType: Mutable PrimitiveType: Integer .PARAMETER SupportsClassC Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-iotwireless-deviceprofile-lorawandeviceprofile.html#cfn-iotwireless-deviceprofile-lorawandeviceprofile-supportsclassc UpdateType: Mutable PrimitiveType: Boolean .PARAMETER ClassCTimeout Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-iotwireless-deviceprofile-lorawandeviceprofile.html#cfn-iotwireless-deviceprofile-lorawandeviceprofile-classctimeout UpdateType: Mutable PrimitiveType: Integer .PARAMETER MacVersion Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-iotwireless-deviceprofile-lorawandeviceprofile.html#cfn-iotwireless-deviceprofile-lorawandeviceprofile-macversion UpdateType: Mutable PrimitiveType: String .PARAMETER RegParamsRevision Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-iotwireless-deviceprofile-lorawandeviceprofile.html#cfn-iotwireless-deviceprofile-lorawandeviceprofile-regparamsrevision UpdateType: Mutable PrimitiveType: String .PARAMETER MaxEirp Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-iotwireless-deviceprofile-lorawandeviceprofile.html#cfn-iotwireless-deviceprofile-lorawandeviceprofile-maxeirp UpdateType: Mutable PrimitiveType: Integer .PARAMETER MaxDutyCycle Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-iotwireless-deviceprofile-lorawandeviceprofile.html#cfn-iotwireless-deviceprofile-lorawandeviceprofile-maxdutycycle UpdateType: Mutable PrimitiveType: Integer .PARAMETER SupportsJoin Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-iotwireless-deviceprofile-lorawandeviceprofile.html#cfn-iotwireless-deviceprofile-lorawandeviceprofile-supportsjoin UpdateType: Mutable PrimitiveType: Boolean .PARAMETER RfRegion Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-iotwireless-deviceprofile-lorawandeviceprofile.html#cfn-iotwireless-deviceprofile-lorawandeviceprofile-rfregion UpdateType: Mutable PrimitiveType: String .PARAMETER Supports32BitFCnt Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-iotwireless-deviceprofile-lorawandeviceprofile.html#cfn-iotwireless-deviceprofile-lorawandeviceprofile-supports32bitfcnt UpdateType: Mutable PrimitiveType: Boolean .FUNCTIONALITY Vaporshell #> [OutputType([IoTWirelessDeviceProfileLoRaWANDeviceProfile])] [cmdletbinding()] Param( [parameter(Mandatory = $false)] [object] $SupportsClassB, [parameter(Mandatory = $false)] [object] $ClassBTimeout, [parameter(Mandatory = $false)] [object] $PingSlotPeriod, [parameter(Mandatory = $false)] [object] $PingSlotDr, [parameter(Mandatory = $false)] [object] $PingSlotFreq, [parameter(Mandatory = $false)] [object] $SupportsClassC, [parameter(Mandatory = $false)] [object] $ClassCTimeout, [parameter(Mandatory = $false)] [object] $MacVersion, [parameter(Mandatory = $false)] [object] $RegParamsRevision, [parameter(Mandatory = $false)] [object] $MaxEirp, [parameter(Mandatory = $false)] [object] $MaxDutyCycle, [parameter(Mandatory = $false)] [object] $SupportsJoin, [parameter(Mandatory = $false)] [object] $RfRegion, [parameter(Mandatory = $false)] [object] $Supports32BitFCnt ) Process { $obj = [IoTWirelessDeviceProfileLoRaWANDeviceProfile]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSIoTWirelessDeviceProfileLoRaWANDeviceProfile' function Add-VSIoTWirelessServiceProfileLoRaWANServiceProfile { <# .SYNOPSIS Adds an AWS::IoTWireless::ServiceProfile.LoRaWANServiceProfile resource property to the template. .DESCRIPTION Adds an AWS::IoTWireless::ServiceProfile.LoRaWANServiceProfile resource property to the template. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-iotwireless-serviceprofile-lorawanserviceprofile.html .PARAMETER UlRate Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-iotwireless-serviceprofile-lorawanserviceprofile.html#cfn-iotwireless-serviceprofile-lorawanserviceprofile-ulrate UpdateType: Mutable PrimitiveType: Integer .PARAMETER UlBucketSize Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-iotwireless-serviceprofile-lorawanserviceprofile.html#cfn-iotwireless-serviceprofile-lorawanserviceprofile-ulbucketsize UpdateType: Mutable PrimitiveType: Integer .PARAMETER UlRatePolicy Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-iotwireless-serviceprofile-lorawanserviceprofile.html#cfn-iotwireless-serviceprofile-lorawanserviceprofile-ulratepolicy UpdateType: Mutable PrimitiveType: String .PARAMETER DlRate Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-iotwireless-serviceprofile-lorawanserviceprofile.html#cfn-iotwireless-serviceprofile-lorawanserviceprofile-dlrate UpdateType: Mutable PrimitiveType: Integer .PARAMETER DlBucketSize Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-iotwireless-serviceprofile-lorawanserviceprofile.html#cfn-iotwireless-serviceprofile-lorawanserviceprofile-dlbucketsize UpdateType: Mutable PrimitiveType: Integer .PARAMETER DlRatePolicy Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-iotwireless-serviceprofile-lorawanserviceprofile.html#cfn-iotwireless-serviceprofile-lorawanserviceprofile-dlratepolicy UpdateType: Mutable PrimitiveType: String .PARAMETER AddGwMetadata Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-iotwireless-serviceprofile-lorawanserviceprofile.html#cfn-iotwireless-serviceprofile-lorawanserviceprofile-addgwmetadata UpdateType: Mutable PrimitiveType: Boolean .PARAMETER DevStatusReqFreq Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-iotwireless-serviceprofile-lorawanserviceprofile.html#cfn-iotwireless-serviceprofile-lorawanserviceprofile-devstatusreqfreq UpdateType: Mutable PrimitiveType: Integer .PARAMETER ReportDevStatusBattery Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-iotwireless-serviceprofile-lorawanserviceprofile.html#cfn-iotwireless-serviceprofile-lorawanserviceprofile-reportdevstatusbattery UpdateType: Mutable PrimitiveType: Boolean .PARAMETER ReportDevStatusMargin Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-iotwireless-serviceprofile-lorawanserviceprofile.html#cfn-iotwireless-serviceprofile-lorawanserviceprofile-reportdevstatusmargin UpdateType: Mutable PrimitiveType: Boolean .PARAMETER DrMin Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-iotwireless-serviceprofile-lorawanserviceprofile.html#cfn-iotwireless-serviceprofile-lorawanserviceprofile-drmin UpdateType: Mutable PrimitiveType: Integer .PARAMETER DrMax Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-iotwireless-serviceprofile-lorawanserviceprofile.html#cfn-iotwireless-serviceprofile-lorawanserviceprofile-drmax UpdateType: Mutable PrimitiveType: Integer .PARAMETER ChannelMask Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-iotwireless-serviceprofile-lorawanserviceprofile.html#cfn-iotwireless-serviceprofile-lorawanserviceprofile-channelmask UpdateType: Mutable PrimitiveType: String .PARAMETER PrAllowed Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-iotwireless-serviceprofile-lorawanserviceprofile.html#cfn-iotwireless-serviceprofile-lorawanserviceprofile-prallowed UpdateType: Mutable PrimitiveType: Boolean .PARAMETER HrAllowed Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-iotwireless-serviceprofile-lorawanserviceprofile.html#cfn-iotwireless-serviceprofile-lorawanserviceprofile-hrallowed UpdateType: Mutable PrimitiveType: Boolean .PARAMETER RaAllowed Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-iotwireless-serviceprofile-lorawanserviceprofile.html#cfn-iotwireless-serviceprofile-lorawanserviceprofile-raallowed UpdateType: Mutable PrimitiveType: Boolean .PARAMETER NwkGeoLoc Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-iotwireless-serviceprofile-lorawanserviceprofile.html#cfn-iotwireless-serviceprofile-lorawanserviceprofile-nwkgeoloc UpdateType: Mutable PrimitiveType: Boolean .PARAMETER TargetPer Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-iotwireless-serviceprofile-lorawanserviceprofile.html#cfn-iotwireless-serviceprofile-lorawanserviceprofile-targetper UpdateType: Mutable PrimitiveType: Integer .PARAMETER MinGwDiversity Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-iotwireless-serviceprofile-lorawanserviceprofile.html#cfn-iotwireless-serviceprofile-lorawanserviceprofile-mingwdiversity UpdateType: Mutable PrimitiveType: Integer .FUNCTIONALITY Vaporshell #> [OutputType([IoTWirelessServiceProfileLoRaWANServiceProfile])] [cmdletbinding()] Param( [parameter(Mandatory = $false)] [object] $UlRate, [parameter(Mandatory = $false)] [object] $UlBucketSize, [parameter(Mandatory = $false)] [object] $UlRatePolicy, [parameter(Mandatory = $false)] [object] $DlRate, [parameter(Mandatory = $false)] [object] $DlBucketSize, [parameter(Mandatory = $false)] [object] $DlRatePolicy, [parameter(Mandatory = $false)] [object] $AddGwMetadata, [parameter(Mandatory = $false)] [object] $DevStatusReqFreq, [parameter(Mandatory = $false)] [object] $ReportDevStatusBattery, [parameter(Mandatory = $false)] [object] $ReportDevStatusMargin, [parameter(Mandatory = $false)] [object] $DrMin, [parameter(Mandatory = $false)] [object] $DrMax, [parameter(Mandatory = $false)] [object] $ChannelMask, [parameter(Mandatory = $false)] [object] $PrAllowed, [parameter(Mandatory = $false)] [object] $HrAllowed, [parameter(Mandatory = $false)] [object] $RaAllowed, [parameter(Mandatory = $false)] [object] $NwkGeoLoc, [parameter(Mandatory = $false)] [object] $TargetPer, [parameter(Mandatory = $false)] [object] $MinGwDiversity ) Process { $obj = [IoTWirelessServiceProfileLoRaWANServiceProfile]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSIoTWirelessServiceProfileLoRaWANServiceProfile' function Add-VSIoTWirelessWirelessDeviceAbpV10x { <# .SYNOPSIS Adds an AWS::IoTWireless::WirelessDevice.AbpV10x resource property to the template. .DESCRIPTION Adds an AWS::IoTWireless::WirelessDevice.AbpV10x resource property to the template. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-iotwireless-wirelessdevice-abpv10x.html .PARAMETER DevAddr Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-iotwireless-wirelessdevice-abpv10x.html#cfn-iotwireless-wirelessdevice-abpv10x-devaddr UpdateType: Mutable PrimitiveType: String .PARAMETER SessionKeys Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-iotwireless-wirelessdevice-abpv10x.html#cfn-iotwireless-wirelessdevice-abpv10x-sessionkeys UpdateType: Mutable Type: SessionKeysAbpV10x .FUNCTIONALITY Vaporshell #> [OutputType([IoTWirelessWirelessDeviceAbpV10x])] [cmdletbinding()] Param( [parameter(Mandatory = $true)] [object] $DevAddr, [parameter(Mandatory = $true)] $SessionKeys ) Process { $obj = [IoTWirelessWirelessDeviceAbpV10x]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSIoTWirelessWirelessDeviceAbpV10x' function Add-VSIoTWirelessWirelessDeviceAbpV11 { <# .SYNOPSIS Adds an AWS::IoTWireless::WirelessDevice.AbpV11 resource property to the template. .DESCRIPTION Adds an AWS::IoTWireless::WirelessDevice.AbpV11 resource property to the template. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-iotwireless-wirelessdevice-abpv11.html .PARAMETER DevAddr Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-iotwireless-wirelessdevice-abpv11.html#cfn-iotwireless-wirelessdevice-abpv11-devaddr UpdateType: Mutable PrimitiveType: String .PARAMETER SessionKeys Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-iotwireless-wirelessdevice-abpv11.html#cfn-iotwireless-wirelessdevice-abpv11-sessionkeys UpdateType: Mutable Type: SessionKeysAbpV11 .FUNCTIONALITY Vaporshell #> [OutputType([IoTWirelessWirelessDeviceAbpV11])] [cmdletbinding()] Param( [parameter(Mandatory = $true)] [object] $DevAddr, [parameter(Mandatory = $true)] $SessionKeys ) Process { $obj = [IoTWirelessWirelessDeviceAbpV11]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSIoTWirelessWirelessDeviceAbpV11' function Add-VSIoTWirelessWirelessDeviceLoRaWANDevice { <# .SYNOPSIS Adds an AWS::IoTWireless::WirelessDevice.LoRaWANDevice resource property to the template. .DESCRIPTION Adds an AWS::IoTWireless::WirelessDevice.LoRaWANDevice resource property to the template. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-iotwireless-wirelessdevice-lorawandevice.html .PARAMETER DevEui Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-iotwireless-wirelessdevice-lorawandevice.html#cfn-iotwireless-wirelessdevice-lorawandevice-deveui UpdateType: Mutable PrimitiveType: String .PARAMETER DeviceProfileId Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-iotwireless-wirelessdevice-lorawandevice.html#cfn-iotwireless-wirelessdevice-lorawandevice-deviceprofileid UpdateType: Mutable PrimitiveType: String .PARAMETER ServiceProfileId Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-iotwireless-wirelessdevice-lorawandevice.html#cfn-iotwireless-wirelessdevice-lorawandevice-serviceprofileid UpdateType: Mutable PrimitiveType: String .PARAMETER OtaaV11 Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-iotwireless-wirelessdevice-lorawandevice.html#cfn-iotwireless-wirelessdevice-lorawandevice-otaav11 UpdateType: Mutable Type: OtaaV11 .PARAMETER OtaaV10x Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-iotwireless-wirelessdevice-lorawandevice.html#cfn-iotwireless-wirelessdevice-lorawandevice-otaav10x UpdateType: Mutable Type: OtaaV10x .PARAMETER AbpV11 Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-iotwireless-wirelessdevice-lorawandevice.html#cfn-iotwireless-wirelessdevice-lorawandevice-abpv11 UpdateType: Mutable Type: AbpV11 .PARAMETER AbpV10x Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-iotwireless-wirelessdevice-lorawandevice.html#cfn-iotwireless-wirelessdevice-lorawandevice-abpv10x UpdateType: Mutable Type: AbpV10x .FUNCTIONALITY Vaporshell #> [OutputType([IoTWirelessWirelessDeviceLoRaWANDevice])] [cmdletbinding()] Param( [parameter(Mandatory = $false)] [object] $DevEui, [parameter(Mandatory = $false)] [object] $DeviceProfileId, [parameter(Mandatory = $false)] [object] $ServiceProfileId, [parameter(Mandatory = $false)] $OtaaV11, [parameter(Mandatory = $false)] $OtaaV10x, [parameter(Mandatory = $false)] $AbpV11, [parameter(Mandatory = $false)] $AbpV10x ) Process { $obj = [IoTWirelessWirelessDeviceLoRaWANDevice]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSIoTWirelessWirelessDeviceLoRaWANDevice' function Add-VSIoTWirelessWirelessDeviceOtaaV10x { <# .SYNOPSIS Adds an AWS::IoTWireless::WirelessDevice.OtaaV10x resource property to the template. .DESCRIPTION Adds an AWS::IoTWireless::WirelessDevice.OtaaV10x resource property to the template. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-iotwireless-wirelessdevice-otaav10x.html .PARAMETER AppKey Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-iotwireless-wirelessdevice-otaav10x.html#cfn-iotwireless-wirelessdevice-otaav10x-appkey UpdateType: Mutable PrimitiveType: String .PARAMETER AppEui Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-iotwireless-wirelessdevice-otaav10x.html#cfn-iotwireless-wirelessdevice-otaav10x-appeui UpdateType: Mutable PrimitiveType: String .FUNCTIONALITY Vaporshell #> [OutputType([IoTWirelessWirelessDeviceOtaaV10x])] [cmdletbinding()] Param( [parameter(Mandatory = $true)] [object] $AppKey, [parameter(Mandatory = $true)] [object] $AppEui ) Process { $obj = [IoTWirelessWirelessDeviceOtaaV10x]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSIoTWirelessWirelessDeviceOtaaV10x' function Add-VSIoTWirelessWirelessDeviceOtaaV11 { <# .SYNOPSIS Adds an AWS::IoTWireless::WirelessDevice.OtaaV11 resource property to the template. .DESCRIPTION Adds an AWS::IoTWireless::WirelessDevice.OtaaV11 resource property to the template. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-iotwireless-wirelessdevice-otaav11.html .PARAMETER AppKey Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-iotwireless-wirelessdevice-otaav11.html#cfn-iotwireless-wirelessdevice-otaav11-appkey UpdateType: Mutable PrimitiveType: String .PARAMETER NwkKey Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-iotwireless-wirelessdevice-otaav11.html#cfn-iotwireless-wirelessdevice-otaav11-nwkkey UpdateType: Mutable PrimitiveType: String .PARAMETER JoinEui Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-iotwireless-wirelessdevice-otaav11.html#cfn-iotwireless-wirelessdevice-otaav11-joineui UpdateType: Mutable PrimitiveType: String .FUNCTIONALITY Vaporshell #> [OutputType([IoTWirelessWirelessDeviceOtaaV11])] [cmdletbinding()] Param( [parameter(Mandatory = $true)] [object] $AppKey, [parameter(Mandatory = $true)] [object] $NwkKey, [parameter(Mandatory = $true)] [object] $JoinEui ) Process { $obj = [IoTWirelessWirelessDeviceOtaaV11]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSIoTWirelessWirelessDeviceOtaaV11' function Add-VSIoTWirelessWirelessDeviceSessionKeysAbpV10x { <# .SYNOPSIS Adds an AWS::IoTWireless::WirelessDevice.SessionKeysAbpV10x resource property to the template. .DESCRIPTION Adds an AWS::IoTWireless::WirelessDevice.SessionKeysAbpV10x resource property to the template. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-iotwireless-wirelessdevice-sessionkeysabpv10x.html .PARAMETER NwkSKey Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-iotwireless-wirelessdevice-sessionkeysabpv10x.html#cfn-iotwireless-wirelessdevice-sessionkeysabpv10x-nwkskey UpdateType: Mutable PrimitiveType: String .PARAMETER AppSKey Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-iotwireless-wirelessdevice-sessionkeysabpv10x.html#cfn-iotwireless-wirelessdevice-sessionkeysabpv10x-appskey UpdateType: Mutable PrimitiveType: String .FUNCTIONALITY Vaporshell #> [OutputType([IoTWirelessWirelessDeviceSessionKeysAbpV10x])] [cmdletbinding()] Param( [parameter(Mandatory = $true)] [object] $NwkSKey, [parameter(Mandatory = $true)] [object] $AppSKey ) Process { $obj = [IoTWirelessWirelessDeviceSessionKeysAbpV10x]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSIoTWirelessWirelessDeviceSessionKeysAbpV10x' function Add-VSIoTWirelessWirelessDeviceSessionKeysAbpV11 { <# .SYNOPSIS Adds an AWS::IoTWireless::WirelessDevice.SessionKeysAbpV11 resource property to the template. .DESCRIPTION Adds an AWS::IoTWireless::WirelessDevice.SessionKeysAbpV11 resource property to the template. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-iotwireless-wirelessdevice-sessionkeysabpv11.html .PARAMETER FNwkSIntKey Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-iotwireless-wirelessdevice-sessionkeysabpv11.html#cfn-iotwireless-wirelessdevice-sessionkeysabpv11-fnwksintkey UpdateType: Mutable PrimitiveType: String .PARAMETER SNwkSIntKey Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-iotwireless-wirelessdevice-sessionkeysabpv11.html#cfn-iotwireless-wirelessdevice-sessionkeysabpv11-snwksintkey UpdateType: Mutable PrimitiveType: String .PARAMETER NwkSEncKey Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-iotwireless-wirelessdevice-sessionkeysabpv11.html#cfn-iotwireless-wirelessdevice-sessionkeysabpv11-nwksenckey UpdateType: Mutable PrimitiveType: String .PARAMETER AppSKey Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-iotwireless-wirelessdevice-sessionkeysabpv11.html#cfn-iotwireless-wirelessdevice-sessionkeysabpv11-appskey UpdateType: Mutable PrimitiveType: String .FUNCTIONALITY Vaporshell #> [OutputType([IoTWirelessWirelessDeviceSessionKeysAbpV11])] [cmdletbinding()] Param( [parameter(Mandatory = $true)] [object] $FNwkSIntKey, [parameter(Mandatory = $true)] [object] $SNwkSIntKey, [parameter(Mandatory = $true)] [object] $NwkSEncKey, [parameter(Mandatory = $true)] [object] $AppSKey ) Process { $obj = [IoTWirelessWirelessDeviceSessionKeysAbpV11]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSIoTWirelessWirelessDeviceSessionKeysAbpV11' function Add-VSIoTWirelessWirelessGatewayLoRaWANGateway { <# .SYNOPSIS Adds an AWS::IoTWireless::WirelessGateway.LoRaWANGateway resource property to the template. .DESCRIPTION Adds an AWS::IoTWireless::WirelessGateway.LoRaWANGateway resource property to the template. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-iotwireless-wirelessgateway-lorawangateway.html .PARAMETER GatewayEui Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-iotwireless-wirelessgateway-lorawangateway.html#cfn-iotwireless-wirelessgateway-lorawangateway-gatewayeui UpdateType: Mutable PrimitiveType: String .PARAMETER RfRegion Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-iotwireless-wirelessgateway-lorawangateway.html#cfn-iotwireless-wirelessgateway-lorawangateway-rfregion UpdateType: Mutable PrimitiveType: String .FUNCTIONALITY Vaporshell #> [OutputType([IoTWirelessWirelessGatewayLoRaWANGateway])] [cmdletbinding()] Param( [parameter(Mandatory = $true)] [object] $GatewayEui, [parameter(Mandatory = $true)] [object] $RfRegion ) Process { $obj = [IoTWirelessWirelessGatewayLoRaWANGateway]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSIoTWirelessWirelessGatewayLoRaWANGateway' function New-VSIoTWirelessDestination { <# .SYNOPSIS Adds an AWS::IoTWireless::Destination resource to the template. .DESCRIPTION Adds an AWS::IoTWireless::Destination resource to the template. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-iotwireless-destination.html .PARAMETER LogicalId The logical ID must be alphanumeric (A-Za-z0-9) and unique within the template. Use the logical name to reference the resource in other parts of the template. For example, if you want to map an Amazon Elastic Block Store volume to an Amazon EC2 instance, you reference the logical IDs to associate the block stores with the instance. .PARAMETER Name Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-iotwireless-destination.html#cfn-iotwireless-destination-name UpdateType: Immutable PrimitiveType: String .PARAMETER Expression Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-iotwireless-destination.html#cfn-iotwireless-destination-expression UpdateType: Mutable PrimitiveType: String .PARAMETER ExpressionType Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-iotwireless-destination.html#cfn-iotwireless-destination-expressiontype UpdateType: Mutable PrimitiveType: String .PARAMETER Description Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-iotwireless-destination.html#cfn-iotwireless-destination-description UpdateType: Mutable PrimitiveType: String .PARAMETER Tags Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-iotwireless-destination.html#cfn-iotwireless-destination-tags UpdateType: Mutable Type: List ItemType: Tag DuplicatesAllowed: False .PARAMETER RoleArn Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-iotwireless-destination.html#cfn-iotwireless-destination-rolearn UpdateType: Mutable PrimitiveType: String .PARAMETER DeletionPolicy With the DeletionPolicy attribute you can preserve or (in some cases) backup a resource when its stack is deleted. You specify a DeletionPolicy attribute for each resource that you want to control. If a resource has no DeletionPolicy attribute, AWS CloudFormation deletes the resource by default. To keep a resource when its stack is deleted, specify Retain for that resource. You can use retain for any resource. For example, you can retain a nested stack, S3 bucket, or EC2 instance so that you can continue to use or modify those resources after you delete their stacks. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER UpdateReplacePolicy Use the UpdateReplacePolicy attribute to retain or (in some cases) backup the existing physical instance of a resource when it is replaced during a stack update operation. When you initiate a stack update, AWS CloudFormation updates resources based on differences between what you submit and the stack's current template and parameters. If you update a resource property that requires that the resource be replaced, AWS CloudFormation recreates the resource during the update. Recreating the resource generates a new physical ID. AWS CloudFormation creates the replacement resource first, and then changes references from other dependent resources to point to the replacement resource. By default, AWS CloudFormation then deletes the old resource. Using the UpdateReplacePolicy, you can specify that AWS CloudFormation retain or (in some cases) create a snapshot of the old resource. For resources that support snapshots, such as AWS::EC2::Volume, specify Snapshot to have AWS CloudFormation create a snapshot before deleting the old resource instance. You can apply the UpdateReplacePolicy attribute to any resource. UpdateReplacePolicy is only executed if you update a resource property whose update behavior is specified as Replacement, thereby causing AWS CloudFormation to replace the old resource with a new one with a new physical ID. For example, if you update the Engine property of an AWS::RDS::DBInstance resource type, AWS CloudFormation creates a new resource and replaces the current DB instance resource with the new one. The UpdateReplacePolicy attribute would then dictate whether AWS CloudFormation deleted, retained, or created a snapshot of the old DB instance. The update behavior for each property of a resource is specified in the reference topic for that resource in the AWS Resource and Property Types Reference. For more information on resource update behavior, see Update Behaviors of Stack Resources. The UpdateReplacePolicy attribute applies to stack updates you perform directly, as well as stack updates performed using change sets. Note Resources that are retained continue to exist and continue to incur applicable charges until you delete those resources. Snapshots that are created with this policy continue to exist and continue to incur applicable charges until you delete those snapshots. UpdateReplacePolicy retains the old physical resource or snapshot, but removes it from AWS CloudFormation's scope. UpdateReplacePolicy differs from the DeletionPolicy attribute in that it only applies to resources replaced during stack updates. Use DeletionPolicy for resources deleted when a stack is deleted, or when the resource definition itself is deleted from the template as part of a stack update. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER DependsOn With the DependsOn attribute you can specify that the creation of a specific resource follows another. When you add a DependsOn attribute to a resource, that resource is created only after the creation of the resource specified in the DependsOn attribute. This parameter takes a string or list of strings representing Logical IDs of resources that must be created prior to this resource being created. .PARAMETER Metadata The Metadata attribute enables you to associate structured data with a resource. By adding a Metadata attribute to a resource, you can add data in JSON or YAML to the resource declaration. In addition, you can use intrinsic functions (such as GetAtt and Ref), parameters, and pseudo parameters within the Metadata attribute to add those interpreted values. This will be returned when describing the resource using AWS CLI. .PARAMETER UpdatePolicy Use the UpdatePolicy attribute to specify how AWS CloudFormation handles updates to the AWS::AutoScaling::AutoScalingGroup resource. AWS CloudFormation invokes one of three update policies depending on the type of change you make or whether a scheduled action is associated with the Auto Scaling group. You must use the "Add-UpdatePolicy" function or the [UpdatePolicy] class here. .PARAMETER Condition Logical ID of the condition that this resource needs to be true in order for this resource to be provisioned. .FUNCTIONALITY Vaporshell #> [OutputType([IoTWirelessDestination])] [cmdletbinding()] Param( [parameter(Mandatory = $true,Position = 0)] [ValidateLogicalId()] [string] $LogicalId, [parameter(Mandatory = $true)] [object] $Name, [parameter(Mandatory = $true)] [object] $Expression, [parameter(Mandatory = $true)] [object] $ExpressionType, [parameter(Mandatory = $false)] [object] $Description, [TransformTag()] [object] [parameter(Mandatory = $false)] $Tags, [parameter(Mandatory = $true)] [object] $RoleArn, [parameter()] [DeletionPolicy] $DeletionPolicy, [parameter()] [UpdateReplacePolicy] $UpdateReplacePolicy, [parameter(Mandatory = $false)] [string[]] $DependsOn, [parameter(Mandatory = $false)] [VSJson] $Metadata, [parameter(Mandatory = $false)] [UpdatePolicy] $UpdatePolicy, [parameter(Mandatory = $false)] [string] $Condition ) Process { $obj = [IoTWirelessDestination]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'New-VSIoTWirelessDestination' function New-VSIoTWirelessDeviceProfile { <# .SYNOPSIS Adds an AWS::IoTWireless::DeviceProfile resource to the template. .DESCRIPTION Adds an AWS::IoTWireless::DeviceProfile resource to the template. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-iotwireless-deviceprofile.html .PARAMETER LogicalId The logical ID must be alphanumeric (A-Za-z0-9) and unique within the template. Use the logical name to reference the resource in other parts of the template. For example, if you want to map an Amazon Elastic Block Store volume to an Amazon EC2 instance, you reference the logical IDs to associate the block stores with the instance. .PARAMETER Name Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-iotwireless-deviceprofile.html#cfn-iotwireless-deviceprofile-name UpdateType: Mutable PrimitiveType: String .PARAMETER LoRaWAN Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-iotwireless-deviceprofile.html#cfn-iotwireless-deviceprofile-lorawan UpdateType: Mutable Type: LoRaWANDeviceProfile .PARAMETER Tags Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-iotwireless-deviceprofile.html#cfn-iotwireless-deviceprofile-tags UpdateType: Mutable Type: List ItemType: Tag DuplicatesAllowed: False .PARAMETER DeletionPolicy With the DeletionPolicy attribute you can preserve or (in some cases) backup a resource when its stack is deleted. You specify a DeletionPolicy attribute for each resource that you want to control. If a resource has no DeletionPolicy attribute, AWS CloudFormation deletes the resource by default. To keep a resource when its stack is deleted, specify Retain for that resource. You can use retain for any resource. For example, you can retain a nested stack, S3 bucket, or EC2 instance so that you can continue to use or modify those resources after you delete their stacks. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER UpdateReplacePolicy Use the UpdateReplacePolicy attribute to retain or (in some cases) backup the existing physical instance of a resource when it is replaced during a stack update operation. When you initiate a stack update, AWS CloudFormation updates resources based on differences between what you submit and the stack's current template and parameters. If you update a resource property that requires that the resource be replaced, AWS CloudFormation recreates the resource during the update. Recreating the resource generates a new physical ID. AWS CloudFormation creates the replacement resource first, and then changes references from other dependent resources to point to the replacement resource. By default, AWS CloudFormation then deletes the old resource. Using the UpdateReplacePolicy, you can specify that AWS CloudFormation retain or (in some cases) create a snapshot of the old resource. For resources that support snapshots, such as AWS::EC2::Volume, specify Snapshot to have AWS CloudFormation create a snapshot before deleting the old resource instance. You can apply the UpdateReplacePolicy attribute to any resource. UpdateReplacePolicy is only executed if you update a resource property whose update behavior is specified as Replacement, thereby causing AWS CloudFormation to replace the old resource with a new one with a new physical ID. For example, if you update the Engine property of an AWS::RDS::DBInstance resource type, AWS CloudFormation creates a new resource and replaces the current DB instance resource with the new one. The UpdateReplacePolicy attribute would then dictate whether AWS CloudFormation deleted, retained, or created a snapshot of the old DB instance. The update behavior for each property of a resource is specified in the reference topic for that resource in the AWS Resource and Property Types Reference. For more information on resource update behavior, see Update Behaviors of Stack Resources. The UpdateReplacePolicy attribute applies to stack updates you perform directly, as well as stack updates performed using change sets. Note Resources that are retained continue to exist and continue to incur applicable charges until you delete those resources. Snapshots that are created with this policy continue to exist and continue to incur applicable charges until you delete those snapshots. UpdateReplacePolicy retains the old physical resource or snapshot, but removes it from AWS CloudFormation's scope. UpdateReplacePolicy differs from the DeletionPolicy attribute in that it only applies to resources replaced during stack updates. Use DeletionPolicy for resources deleted when a stack is deleted, or when the resource definition itself is deleted from the template as part of a stack update. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER DependsOn With the DependsOn attribute you can specify that the creation of a specific resource follows another. When you add a DependsOn attribute to a resource, that resource is created only after the creation of the resource specified in the DependsOn attribute. This parameter takes a string or list of strings representing Logical IDs of resources that must be created prior to this resource being created. .PARAMETER Metadata The Metadata attribute enables you to associate structured data with a resource. By adding a Metadata attribute to a resource, you can add data in JSON or YAML to the resource declaration. In addition, you can use intrinsic functions (such as GetAtt and Ref), parameters, and pseudo parameters within the Metadata attribute to add those interpreted values. This will be returned when describing the resource using AWS CLI. .PARAMETER UpdatePolicy Use the UpdatePolicy attribute to specify how AWS CloudFormation handles updates to the AWS::AutoScaling::AutoScalingGroup resource. AWS CloudFormation invokes one of three update policies depending on the type of change you make or whether a scheduled action is associated with the Auto Scaling group. You must use the "Add-UpdatePolicy" function or the [UpdatePolicy] class here. .PARAMETER Condition Logical ID of the condition that this resource needs to be true in order for this resource to be provisioned. .FUNCTIONALITY Vaporshell #> [OutputType([IoTWirelessDeviceProfile])] [cmdletbinding()] Param( [parameter(Mandatory = $true,Position = 0)] [ValidateLogicalId()] [string] $LogicalId, [parameter(Mandatory = $false)] [object] $Name, [parameter(Mandatory = $false)] $LoRaWAN, [TransformTag()] [object] [parameter(Mandatory = $false)] $Tags, [parameter()] [DeletionPolicy] $DeletionPolicy, [parameter()] [UpdateReplacePolicy] $UpdateReplacePolicy, [parameter(Mandatory = $false)] [string[]] $DependsOn, [parameter(Mandatory = $false)] [VSJson] $Metadata, [parameter(Mandatory = $false)] [UpdatePolicy] $UpdatePolicy, [parameter(Mandatory = $false)] [string] $Condition ) Process { $obj = [IoTWirelessDeviceProfile]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'New-VSIoTWirelessDeviceProfile' function New-VSIoTWirelessServiceProfile { <# .SYNOPSIS Adds an AWS::IoTWireless::ServiceProfile resource to the template. .DESCRIPTION Adds an AWS::IoTWireless::ServiceProfile resource to the template. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-iotwireless-serviceprofile.html .PARAMETER LogicalId The logical ID must be alphanumeric (A-Za-z0-9) and unique within the template. Use the logical name to reference the resource in other parts of the template. For example, if you want to map an Amazon Elastic Block Store volume to an Amazon EC2 instance, you reference the logical IDs to associate the block stores with the instance. .PARAMETER Name Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-iotwireless-serviceprofile.html#cfn-iotwireless-serviceprofile-name UpdateType: Mutable PrimitiveType: String .PARAMETER LoRaWAN Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-iotwireless-serviceprofile.html#cfn-iotwireless-serviceprofile-lorawan UpdateType: Mutable Type: LoRaWANServiceProfile .PARAMETER Tags Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-iotwireless-serviceprofile.html#cfn-iotwireless-serviceprofile-tags UpdateType: Mutable Type: List ItemType: Tag DuplicatesAllowed: False .PARAMETER DeletionPolicy With the DeletionPolicy attribute you can preserve or (in some cases) backup a resource when its stack is deleted. You specify a DeletionPolicy attribute for each resource that you want to control. If a resource has no DeletionPolicy attribute, AWS CloudFormation deletes the resource by default. To keep a resource when its stack is deleted, specify Retain for that resource. You can use retain for any resource. For example, you can retain a nested stack, S3 bucket, or EC2 instance so that you can continue to use or modify those resources after you delete their stacks. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER UpdateReplacePolicy Use the UpdateReplacePolicy attribute to retain or (in some cases) backup the existing physical instance of a resource when it is replaced during a stack update operation. When you initiate a stack update, AWS CloudFormation updates resources based on differences between what you submit and the stack's current template and parameters. If you update a resource property that requires that the resource be replaced, AWS CloudFormation recreates the resource during the update. Recreating the resource generates a new physical ID. AWS CloudFormation creates the replacement resource first, and then changes references from other dependent resources to point to the replacement resource. By default, AWS CloudFormation then deletes the old resource. Using the UpdateReplacePolicy, you can specify that AWS CloudFormation retain or (in some cases) create a snapshot of the old resource. For resources that support snapshots, such as AWS::EC2::Volume, specify Snapshot to have AWS CloudFormation create a snapshot before deleting the old resource instance. You can apply the UpdateReplacePolicy attribute to any resource. UpdateReplacePolicy is only executed if you update a resource property whose update behavior is specified as Replacement, thereby causing AWS CloudFormation to replace the old resource with a new one with a new physical ID. For example, if you update the Engine property of an AWS::RDS::DBInstance resource type, AWS CloudFormation creates a new resource and replaces the current DB instance resource with the new one. The UpdateReplacePolicy attribute would then dictate whether AWS CloudFormation deleted, retained, or created a snapshot of the old DB instance. The update behavior for each property of a resource is specified in the reference topic for that resource in the AWS Resource and Property Types Reference. For more information on resource update behavior, see Update Behaviors of Stack Resources. The UpdateReplacePolicy attribute applies to stack updates you perform directly, as well as stack updates performed using change sets. Note Resources that are retained continue to exist and continue to incur applicable charges until you delete those resources. Snapshots that are created with this policy continue to exist and continue to incur applicable charges until you delete those snapshots. UpdateReplacePolicy retains the old physical resource or snapshot, but removes it from AWS CloudFormation's scope. UpdateReplacePolicy differs from the DeletionPolicy attribute in that it only applies to resources replaced during stack updates. Use DeletionPolicy for resources deleted when a stack is deleted, or when the resource definition itself is deleted from the template as part of a stack update. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER DependsOn With the DependsOn attribute you can specify that the creation of a specific resource follows another. When you add a DependsOn attribute to a resource, that resource is created only after the creation of the resource specified in the DependsOn attribute. This parameter takes a string or list of strings representing Logical IDs of resources that must be created prior to this resource being created. .PARAMETER Metadata The Metadata attribute enables you to associate structured data with a resource. By adding a Metadata attribute to a resource, you can add data in JSON or YAML to the resource declaration. In addition, you can use intrinsic functions (such as GetAtt and Ref), parameters, and pseudo parameters within the Metadata attribute to add those interpreted values. This will be returned when describing the resource using AWS CLI. .PARAMETER UpdatePolicy Use the UpdatePolicy attribute to specify how AWS CloudFormation handles updates to the AWS::AutoScaling::AutoScalingGroup resource. AWS CloudFormation invokes one of three update policies depending on the type of change you make or whether a scheduled action is associated with the Auto Scaling group. You must use the "Add-UpdatePolicy" function or the [UpdatePolicy] class here. .PARAMETER Condition Logical ID of the condition that this resource needs to be true in order for this resource to be provisioned. .FUNCTIONALITY Vaporshell #> [OutputType([IoTWirelessServiceProfile])] [cmdletbinding()] Param( [parameter(Mandatory = $true,Position = 0)] [ValidateLogicalId()] [string] $LogicalId, [parameter(Mandatory = $false)] [object] $Name, [parameter(Mandatory = $false)] $LoRaWAN, [TransformTag()] [object] [parameter(Mandatory = $false)] $Tags, [parameter()] [DeletionPolicy] $DeletionPolicy, [parameter()] [UpdateReplacePolicy] $UpdateReplacePolicy, [parameter(Mandatory = $false)] [string[]] $DependsOn, [parameter(Mandatory = $false)] [VSJson] $Metadata, [parameter(Mandatory = $false)] [UpdatePolicy] $UpdatePolicy, [parameter(Mandatory = $false)] [string] $Condition ) Process { $obj = [IoTWirelessServiceProfile]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'New-VSIoTWirelessServiceProfile' function New-VSIoTWirelessWirelessDevice { <# .SYNOPSIS Adds an AWS::IoTWireless::WirelessDevice resource to the template. .DESCRIPTION Adds an AWS::IoTWireless::WirelessDevice resource to the template. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-iotwireless-wirelessdevice.html .PARAMETER LogicalId The logical ID must be alphanumeric (A-Za-z0-9) and unique within the template. Use the logical name to reference the resource in other parts of the template. For example, if you want to map an Amazon Elastic Block Store volume to an Amazon EC2 instance, you reference the logical IDs to associate the block stores with the instance. .PARAMETER Type Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-iotwireless-wirelessdevice.html#cfn-iotwireless-wirelessdevice-type UpdateType: Mutable PrimitiveType: String .PARAMETER Name Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-iotwireless-wirelessdevice.html#cfn-iotwireless-wirelessdevice-name UpdateType: Mutable PrimitiveType: String .PARAMETER Description Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-iotwireless-wirelessdevice.html#cfn-iotwireless-wirelessdevice-description UpdateType: Mutable PrimitiveType: String .PARAMETER DestinationName Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-iotwireless-wirelessdevice.html#cfn-iotwireless-wirelessdevice-destinationname UpdateType: Mutable PrimitiveType: String .PARAMETER LoRaWAN Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-iotwireless-wirelessdevice.html#cfn-iotwireless-wirelessdevice-lorawan UpdateType: Mutable Type: LoRaWANDevice .PARAMETER Tags Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-iotwireless-wirelessdevice.html#cfn-iotwireless-wirelessdevice-tags UpdateType: Mutable Type: List ItemType: Tag DuplicatesAllowed: False .PARAMETER ThingArn Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-iotwireless-wirelessdevice.html#cfn-iotwireless-wirelessdevice-thingarn UpdateType: Mutable PrimitiveType: String .PARAMETER LastUplinkReceivedAt Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-iotwireless-wirelessdevice.html#cfn-iotwireless-wirelessdevice-lastuplinkreceivedat UpdateType: Mutable PrimitiveType: String .PARAMETER DeletionPolicy With the DeletionPolicy attribute you can preserve or (in some cases) backup a resource when its stack is deleted. You specify a DeletionPolicy attribute for each resource that you want to control. If a resource has no DeletionPolicy attribute, AWS CloudFormation deletes the resource by default. To keep a resource when its stack is deleted, specify Retain for that resource. You can use retain for any resource. For example, you can retain a nested stack, S3 bucket, or EC2 instance so that you can continue to use or modify those resources after you delete their stacks. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER UpdateReplacePolicy Use the UpdateReplacePolicy attribute to retain or (in some cases) backup the existing physical instance of a resource when it is replaced during a stack update operation. When you initiate a stack update, AWS CloudFormation updates resources based on differences between what you submit and the stack's current template and parameters. If you update a resource property that requires that the resource be replaced, AWS CloudFormation recreates the resource during the update. Recreating the resource generates a new physical ID. AWS CloudFormation creates the replacement resource first, and then changes references from other dependent resources to point to the replacement resource. By default, AWS CloudFormation then deletes the old resource. Using the UpdateReplacePolicy, you can specify that AWS CloudFormation retain or (in some cases) create a snapshot of the old resource. For resources that support snapshots, such as AWS::EC2::Volume, specify Snapshot to have AWS CloudFormation create a snapshot before deleting the old resource instance. You can apply the UpdateReplacePolicy attribute to any resource. UpdateReplacePolicy is only executed if you update a resource property whose update behavior is specified as Replacement, thereby causing AWS CloudFormation to replace the old resource with a new one with a new physical ID. For example, if you update the Engine property of an AWS::RDS::DBInstance resource type, AWS CloudFormation creates a new resource and replaces the current DB instance resource with the new one. The UpdateReplacePolicy attribute would then dictate whether AWS CloudFormation deleted, retained, or created a snapshot of the old DB instance. The update behavior for each property of a resource is specified in the reference topic for that resource in the AWS Resource and Property Types Reference. For more information on resource update behavior, see Update Behaviors of Stack Resources. The UpdateReplacePolicy attribute applies to stack updates you perform directly, as well as stack updates performed using change sets. Note Resources that are retained continue to exist and continue to incur applicable charges until you delete those resources. Snapshots that are created with this policy continue to exist and continue to incur applicable charges until you delete those snapshots. UpdateReplacePolicy retains the old physical resource or snapshot, but removes it from AWS CloudFormation's scope. UpdateReplacePolicy differs from the DeletionPolicy attribute in that it only applies to resources replaced during stack updates. Use DeletionPolicy for resources deleted when a stack is deleted, or when the resource definition itself is deleted from the template as part of a stack update. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER DependsOn With the DependsOn attribute you can specify that the creation of a specific resource follows another. When you add a DependsOn attribute to a resource, that resource is created only after the creation of the resource specified in the DependsOn attribute. This parameter takes a string or list of strings representing Logical IDs of resources that must be created prior to this resource being created. .PARAMETER Metadata The Metadata attribute enables you to associate structured data with a resource. By adding a Metadata attribute to a resource, you can add data in JSON or YAML to the resource declaration. In addition, you can use intrinsic functions (such as GetAtt and Ref), parameters, and pseudo parameters within the Metadata attribute to add those interpreted values. This will be returned when describing the resource using AWS CLI. .PARAMETER UpdatePolicy Use the UpdatePolicy attribute to specify how AWS CloudFormation handles updates to the AWS::AutoScaling::AutoScalingGroup resource. AWS CloudFormation invokes one of three update policies depending on the type of change you make or whether a scheduled action is associated with the Auto Scaling group. You must use the "Add-UpdatePolicy" function or the [UpdatePolicy] class here. .PARAMETER Condition Logical ID of the condition that this resource needs to be true in order for this resource to be provisioned. .FUNCTIONALITY Vaporshell #> [OutputType([IoTWirelessWirelessDevice])] [cmdletbinding()] Param( [parameter(Mandatory = $true,Position = 0)] [ValidateLogicalId()] [string] $LogicalId, [parameter(Mandatory = $true)] [object] $Type, [parameter(Mandatory = $false)] [object] $Name, [parameter(Mandatory = $false)] [object] $Description, [parameter(Mandatory = $true)] [object] $DestinationName, [parameter(Mandatory = $false)] $LoRaWAN, [TransformTag()] [object] [parameter(Mandatory = $false)] $Tags, [parameter(Mandatory = $false)] [object] $ThingArn, [parameter(Mandatory = $false)] [object] $LastUplinkReceivedAt, [parameter()] [DeletionPolicy] $DeletionPolicy, [parameter()] [UpdateReplacePolicy] $UpdateReplacePolicy, [parameter(Mandatory = $false)] [string[]] $DependsOn, [parameter(Mandatory = $false)] [VSJson] $Metadata, [parameter(Mandatory = $false)] [UpdatePolicy] $UpdatePolicy, [parameter(Mandatory = $false)] [string] $Condition ) Process { $obj = [IoTWirelessWirelessDevice]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'New-VSIoTWirelessWirelessDevice' function New-VSIoTWirelessWirelessGateway { <# .SYNOPSIS Adds an AWS::IoTWireless::WirelessGateway resource to the template. .DESCRIPTION Adds an AWS::IoTWireless::WirelessGateway resource to the template. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-iotwireless-wirelessgateway.html .PARAMETER LogicalId The logical ID must be alphanumeric (A-Za-z0-9) and unique within the template. Use the logical name to reference the resource in other parts of the template. For example, if you want to map an Amazon Elastic Block Store volume to an Amazon EC2 instance, you reference the logical IDs to associate the block stores with the instance. .PARAMETER Name Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-iotwireless-wirelessgateway.html#cfn-iotwireless-wirelessgateway-name UpdateType: Mutable PrimitiveType: String .PARAMETER Description Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-iotwireless-wirelessgateway.html#cfn-iotwireless-wirelessgateway-description UpdateType: Mutable PrimitiveType: String .PARAMETER Tags Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-iotwireless-wirelessgateway.html#cfn-iotwireless-wirelessgateway-tags UpdateType: Mutable Type: List ItemType: Tag DuplicatesAllowed: False .PARAMETER LoRaWAN Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-iotwireless-wirelessgateway.html#cfn-iotwireless-wirelessgateway-lorawan UpdateType: Mutable Type: LoRaWANGateway .PARAMETER ThingArn Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-iotwireless-wirelessgateway.html#cfn-iotwireless-wirelessgateway-thingarn UpdateType: Mutable PrimitiveType: String .PARAMETER LastUplinkReceivedAt Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-iotwireless-wirelessgateway.html#cfn-iotwireless-wirelessgateway-lastuplinkreceivedat UpdateType: Mutable PrimitiveType: String .PARAMETER DeletionPolicy With the DeletionPolicy attribute you can preserve or (in some cases) backup a resource when its stack is deleted. You specify a DeletionPolicy attribute for each resource that you want to control. If a resource has no DeletionPolicy attribute, AWS CloudFormation deletes the resource by default. To keep a resource when its stack is deleted, specify Retain for that resource. You can use retain for any resource. For example, you can retain a nested stack, S3 bucket, or EC2 instance so that you can continue to use or modify those resources after you delete their stacks. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER UpdateReplacePolicy Use the UpdateReplacePolicy attribute to retain or (in some cases) backup the existing physical instance of a resource when it is replaced during a stack update operation. When you initiate a stack update, AWS CloudFormation updates resources based on differences between what you submit and the stack's current template and parameters. If you update a resource property that requires that the resource be replaced, AWS CloudFormation recreates the resource during the update. Recreating the resource generates a new physical ID. AWS CloudFormation creates the replacement resource first, and then changes references from other dependent resources to point to the replacement resource. By default, AWS CloudFormation then deletes the old resource. Using the UpdateReplacePolicy, you can specify that AWS CloudFormation retain or (in some cases) create a snapshot of the old resource. For resources that support snapshots, such as AWS::EC2::Volume, specify Snapshot to have AWS CloudFormation create a snapshot before deleting the old resource instance. You can apply the UpdateReplacePolicy attribute to any resource. UpdateReplacePolicy is only executed if you update a resource property whose update behavior is specified as Replacement, thereby causing AWS CloudFormation to replace the old resource with a new one with a new physical ID. For example, if you update the Engine property of an AWS::RDS::DBInstance resource type, AWS CloudFormation creates a new resource and replaces the current DB instance resource with the new one. The UpdateReplacePolicy attribute would then dictate whether AWS CloudFormation deleted, retained, or created a snapshot of the old DB instance. The update behavior for each property of a resource is specified in the reference topic for that resource in the AWS Resource and Property Types Reference. For more information on resource update behavior, see Update Behaviors of Stack Resources. The UpdateReplacePolicy attribute applies to stack updates you perform directly, as well as stack updates performed using change sets. Note Resources that are retained continue to exist and continue to incur applicable charges until you delete those resources. Snapshots that are created with this policy continue to exist and continue to incur applicable charges until you delete those snapshots. UpdateReplacePolicy retains the old physical resource or snapshot, but removes it from AWS CloudFormation's scope. UpdateReplacePolicy differs from the DeletionPolicy attribute in that it only applies to resources replaced during stack updates. Use DeletionPolicy for resources deleted when a stack is deleted, or when the resource definition itself is deleted from the template as part of a stack update. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER DependsOn With the DependsOn attribute you can specify that the creation of a specific resource follows another. When you add a DependsOn attribute to a resource, that resource is created only after the creation of the resource specified in the DependsOn attribute. This parameter takes a string or list of strings representing Logical IDs of resources that must be created prior to this resource being created. .PARAMETER Metadata The Metadata attribute enables you to associate structured data with a resource. By adding a Metadata attribute to a resource, you can add data in JSON or YAML to the resource declaration. In addition, you can use intrinsic functions (such as GetAtt and Ref), parameters, and pseudo parameters within the Metadata attribute to add those interpreted values. This will be returned when describing the resource using AWS CLI. .PARAMETER UpdatePolicy Use the UpdatePolicy attribute to specify how AWS CloudFormation handles updates to the AWS::AutoScaling::AutoScalingGroup resource. AWS CloudFormation invokes one of three update policies depending on the type of change you make or whether a scheduled action is associated with the Auto Scaling group. You must use the "Add-UpdatePolicy" function or the [UpdatePolicy] class here. .PARAMETER Condition Logical ID of the condition that this resource needs to be true in order for this resource to be provisioned. .FUNCTIONALITY Vaporshell #> [OutputType([IoTWirelessWirelessGateway])] [cmdletbinding()] Param( [parameter(Mandatory = $true,Position = 0)] [ValidateLogicalId()] [string] $LogicalId, [parameter(Mandatory = $false)] [object] $Name, [parameter(Mandatory = $false)] [object] $Description, [TransformTag()] [object] [parameter(Mandatory = $false)] $Tags, [parameter(Mandatory = $true)] $LoRaWAN, [parameter(Mandatory = $false)] [object] $ThingArn, [parameter(Mandatory = $false)] [object] $LastUplinkReceivedAt, [parameter()] [DeletionPolicy] $DeletionPolicy, [parameter()] [UpdateReplacePolicy] $UpdateReplacePolicy, [parameter(Mandatory = $false)] [string[]] $DependsOn, [parameter(Mandatory = $false)] [VSJson] $Metadata, [parameter(Mandatory = $false)] [UpdatePolicy] $UpdatePolicy, [parameter(Mandatory = $false)] [string] $Condition ) Process { $obj = [IoTWirelessWirelessGateway]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'New-VSIoTWirelessWirelessGateway' |