VaporShell.EventSchemas.psm1
|
# PSM1 Contents function Format-Json { [CmdletBinding()] Param ( [Parameter(Mandatory = $true, Position = 0, ValueFromPipeline = $true)] [String] $Json ) Begin { $cleaner = { param([String]$Line) Process{ [Regex]::Replace( $Line, "\\u(?<Value>[a-zA-Z0-9]{4})", { param($m)([char]([int]::Parse( $m.Groups['Value'].Value, [System.Globalization.NumberStyles]::HexNumber ))).ToString() } ) } } } Process { if ($PSVersionTable.PSVersion.Major -lt 6) { try { $indent = 0; $res = $Json -split '\n' | ForEach-Object { if ($_ -match '[\}\]]') { # This line contains ] or }, decrement the indentation level $indent-- } $line = (' ' * $indent * 2) + $_.TrimStart().Replace(': ', ': ') if ($_ -match '[\{\[]') { # This line contains [ or {, increment the indentation level $indent++ } $cleaner.Invoke($line) } $res -join "`n" } catch { ($Json -split '\n' | ForEach-Object {$cleaner.Invoke($_)}) -join "`n" } } else { ($Json -split '\n' | ForEach-Object {$cleaner.Invoke($_)}) -join "`n" } } } function Get-TrueCount { Param ( [parameter(Mandatory = $false,Position = 0,ValueFromPipeline = $true)] $Array ) Process { if ($array) { if ($array.Count) { $count = $array.Count } else { $count = 1 } } else { $count = 0 } } End { return $count } } function New-VSError { <# .SYNOPSIS Error generator function to use in tandem with $PSCmdlet.ThrowTerminatingError() .PARAMETER Result Allows input of an error from AWS SDK, resulting in the Exception message being parsed out. .PARAMETER String Used to create basic String message errors in the same wrapper #> [cmdletbinding(DefaultParameterSetName="Result")] param( [parameter(Position=0,ParameterSetName="Result")] $Result, [parameter(Position=0,ParameterSetName="String")] $String ) switch ($PSCmdlet.ParameterSetName) { Result { $Exception = "$($result.Exception.InnerException.Message)" } String { $Exception = "$String" } } $e = New-Object "System.Exception" $Exception $errorRecord = New-Object 'System.Management.Automation.ErrorRecord' $e, $null, ([System.Management.Automation.ErrorCategory]::InvalidOperation), $null return $errorRecord } function ResolveS3Endpoint { <# .SYNOPSIS Resolves the S3 endpoint most appropriate for each region. #> Param ( [parameter(Mandatory=$true,Position=0)] [ValidateSet("eu-west-2","ap-south-1","us-east-2","sa-east-1","us-west-1","us-west-2","eu-west-1","ap-southeast-2","ca-central-1","ap-northeast-2","us-east-1","eu-central-1","ap-southeast-1","ap-northeast-1")] [String] $Region ) $endpointMap = @{ "us-east-2" = "s3.us-east-2.amazonaws.com" "us-east-1" = "s3.amazonaws.com" "us-west-1" = "s3-us-west-1.amazonaws.com" "us-west-2" = "s3-us-west-2.amazonaws.com" "ca-central-1" = "s3.ca-central-1.amazonaws.com" "ap-south-1" = "s3.ap-south-1.amazonaws.com" "ap-northeast-2" = "s3.ap-northeast-2.amazonaws.com" "ap-southeast-1" = "s3-ap-southeast-1.amazonaws.com" "ap-southeast-2" = "s3-ap-southeast-2.amazonaws.com" "ap-northeast-1" = "s3-ap-northeast-1.amazonaws.com" "eu-central-1" = "s3.eu-central-1.amazonaws.com" "eu-west-1" = "s3-eu-west-1.amazonaws.com" "eu-west-2" = "s3.eu-west-2.amazonaws.com" "sa-east-1" = "s3-sa-east-1.amazonaws.com" } return $endpointMap[$Region] } function Add-VSEventSchemasDiscovererTagsEntry { <# .SYNOPSIS Adds an AWS::EventSchemas::Discoverer.TagsEntry resource property to the template. Tags to associate with the discoverer. .DESCRIPTION Adds an AWS::EventSchemas::Discoverer.TagsEntry resource property to the template. Tags to associate with the discoverer. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-eventschemas-discoverer-tagsentry.html .PARAMETER Value They value of a key-value pair. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-eventschemas-discoverer-tagsentry.html#cfn-eventschemas-discoverer-tagsentry-value PrimitiveType: String UpdateType: Mutable .PARAMETER Key They key of a key-value pair. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-eventschemas-discoverer-tagsentry.html#cfn-eventschemas-discoverer-tagsentry-key PrimitiveType: String UpdateType: Mutable .FUNCTIONALITY Vaporshell #> [OutputType([EventSchemasDiscovererTagsEntry])] [cmdletbinding()] Param( [parameter(Mandatory = $true)] [object] $Value, [parameter(Mandatory = $true)] [object] $Key ) Process { $obj = [EventSchemasDiscovererTagsEntry]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSEventSchemasDiscovererTagsEntry' function Add-VSEventSchemasRegistryTagsEntry { <# .SYNOPSIS Adds an AWS::EventSchemas::Registry.TagsEntry resource property to the template. Tags to associate with the schema registry. .DESCRIPTION Adds an AWS::EventSchemas::Registry.TagsEntry resource property to the template. Tags to associate with the schema registry. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-eventschemas-registry-tagsentry.html .PARAMETER Value They value of a key-value pair. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-eventschemas-registry-tagsentry.html#cfn-eventschemas-registry-tagsentry-value PrimitiveType: String UpdateType: Mutable .PARAMETER Key They key of a key-value pair. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-eventschemas-registry-tagsentry.html#cfn-eventschemas-registry-tagsentry-key PrimitiveType: String UpdateType: Mutable .FUNCTIONALITY Vaporshell #> [OutputType([EventSchemasRegistryTagsEntry])] [cmdletbinding()] Param( [parameter(Mandatory = $true)] [object] $Value, [parameter(Mandatory = $true)] [object] $Key ) Process { $obj = [EventSchemasRegistryTagsEntry]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSEventSchemasRegistryTagsEntry' function Add-VSEventSchemasSchemaTagsEntry { <# .SYNOPSIS Adds an AWS::EventSchemas::Schema.TagsEntry resource property to the template. Tags to associate with the schema. .DESCRIPTION Adds an AWS::EventSchemas::Schema.TagsEntry resource property to the template. Tags to associate with the schema. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-eventschemas-schema-tagsentry.html .PARAMETER Value They value of a key-value pair. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-eventschemas-schema-tagsentry.html#cfn-eventschemas-schema-tagsentry-value PrimitiveType: String UpdateType: Mutable .PARAMETER Key They key of a key-value pair. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-eventschemas-schema-tagsentry.html#cfn-eventschemas-schema-tagsentry-key PrimitiveType: String UpdateType: Mutable .FUNCTIONALITY Vaporshell #> [OutputType([EventSchemasSchemaTagsEntry])] [cmdletbinding()] Param( [parameter(Mandatory = $true)] [object] $Value, [parameter(Mandatory = $true)] [object] $Key ) Process { $obj = [EventSchemasSchemaTagsEntry]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSEventSchemasSchemaTagsEntry' function New-VSEventSchemasDiscoverer { <# .SYNOPSIS Adds an AWS::EventSchemas::Discoverer resource to the template. Use the AWS::EventSchemas::Discoverer resource to specify a *discoverer* that is associated with an event bus. A discoverer allows the Amazon EventBridge Schema Registry to automatically generate schemas based on events on an event bus. .DESCRIPTION Adds an AWS::EventSchemas::Discoverer resource to the template. Use the AWS::EventSchemas::Discoverer resource to specify a *discoverer* that is associated with an event bus. A discoverer allows the Amazon EventBridge Schema Registry to automatically generate schemas based on events on an event bus. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-eventschemas-discoverer.html .PARAMETER LogicalId The logical ID must be alphanumeric (A-Za-z0-9) and unique within the template. Use the logical name to reference the resource in other parts of the template. For example, if you want to map an Amazon Elastic Block Store volume to an Amazon EC2 instance, you reference the logical IDs to associate the block stores with the instance. .PARAMETER Description A description for the discoverer. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-eventschemas-discoverer.html#cfn-eventschemas-discoverer-description PrimitiveType: String UpdateType: Mutable .PARAMETER SourceArn The ARN of the event bus. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-eventschemas-discoverer.html#cfn-eventschemas-discoverer-sourcearn PrimitiveType: String UpdateType: Immutable .PARAMETER Tags Tags associated with the resource. Type: List Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-eventschemas-discoverer.html#cfn-eventschemas-discoverer-tags ItemType: TagsEntry UpdateType: Mutable .PARAMETER DeletionPolicy With the DeletionPolicy attribute you can preserve or (in some cases) backup a resource when its stack is deleted. You specify a DeletionPolicy attribute for each resource that you want to control. If a resource has no DeletionPolicy attribute, AWS CloudFormation deletes the resource by default. To keep a resource when its stack is deleted, specify Retain for that resource. You can use retain for any resource. For example, you can retain a nested stack, S3 bucket, or EC2 instance so that you can continue to use or modify those resources after you delete their stacks. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER UpdateReplacePolicy Use the UpdateReplacePolicy attribute to retain or (in some cases) backup the existing physical instance of a resource when it is replaced during a stack update operation. When you initiate a stack update, AWS CloudFormation updates resources based on differences between what you submit and the stack's current template and parameters. If you update a resource property that requires that the resource be replaced, AWS CloudFormation recreates the resource during the update. Recreating the resource generates a new physical ID. AWS CloudFormation creates the replacement resource first, and then changes references from other dependent resources to point to the replacement resource. By default, AWS CloudFormation then deletes the old resource. Using the UpdateReplacePolicy, you can specify that AWS CloudFormation retain or (in some cases) create a snapshot of the old resource. For resources that support snapshots, such as AWS::EC2::Volume, specify Snapshot to have AWS CloudFormation create a snapshot before deleting the old resource instance. You can apply the UpdateReplacePolicy attribute to any resource. UpdateReplacePolicy is only executed if you update a resource property whose update behavior is specified as Replacement, thereby causing AWS CloudFormation to replace the old resource with a new one with a new physical ID. For example, if you update the Engine property of an AWS::RDS::DBInstance resource type, AWS CloudFormation creates a new resource and replaces the current DB instance resource with the new one. The UpdateReplacePolicy attribute would then dictate whether AWS CloudFormation deleted, retained, or created a snapshot of the old DB instance. The update behavior for each property of a resource is specified in the reference topic for that resource in the AWS Resource and Property Types Reference. For more information on resource update behavior, see Update Behaviors of Stack Resources. The UpdateReplacePolicy attribute applies to stack updates you perform directly, as well as stack updates performed using change sets. Note Resources that are retained continue to exist and continue to incur applicable charges until you delete those resources. Snapshots that are created with this policy continue to exist and continue to incur applicable charges until you delete those snapshots. UpdateReplacePolicy retains the old physical resource or snapshot, but removes it from AWS CloudFormation's scope. UpdateReplacePolicy differs from the DeletionPolicy attribute in that it only applies to resources replaced during stack updates. Use DeletionPolicy for resources deleted when a stack is deleted, or when the resource definition itself is deleted from the template as part of a stack update. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER DependsOn With the DependsOn attribute you can specify that the creation of a specific resource follows another. When you add a DependsOn attribute to a resource, that resource is created only after the creation of the resource specified in the DependsOn attribute. This parameter takes a string or list of strings representing Logical IDs of resources that must be created prior to this resource being created. .PARAMETER Metadata The Metadata attribute enables you to associate structured data with a resource. By adding a Metadata attribute to a resource, you can add data in JSON or YAML to the resource declaration. In addition, you can use intrinsic functions (such as GetAtt and Ref), parameters, and pseudo parameters within the Metadata attribute to add those interpreted values. This will be returned when describing the resource using AWS CLI. .PARAMETER UpdatePolicy Use the UpdatePolicy attribute to specify how AWS CloudFormation handles updates to the AWS::AutoScaling::AutoScalingGroup resource. AWS CloudFormation invokes one of three update policies depending on the type of change you make or whether a scheduled action is associated with the Auto Scaling group. You must use the "Add-UpdatePolicy" function or the [UpdatePolicy] class here. .PARAMETER Condition Logical ID of the condition that this resource needs to be true in order for this resource to be provisioned. .FUNCTIONALITY Vaporshell #> [OutputType([EventSchemasDiscoverer])] [cmdletbinding()] Param( [parameter(Mandatory = $true,Position = 0)] [ValidateLogicalId()] [string] $LogicalId, [parameter(Mandatory = $false)] [object] $Description, [parameter(Mandatory = $true)] [object] $SourceArn, [parameter(Mandatory = $false)] [object] $Tags, [parameter()] [DeletionPolicy] $DeletionPolicy, [parameter()] [UpdateReplacePolicy] $UpdateReplacePolicy, [parameter(Mandatory = $false)] [string[]] $DependsOn, [parameter(Mandatory = $false)] [VSJson] $Metadata, [parameter(Mandatory = $false)] [UpdatePolicy] $UpdatePolicy, [parameter(Mandatory = $false)] [string] $Condition ) Process { $obj = [EventSchemasDiscoverer]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'New-VSEventSchemasDiscoverer' function New-VSEventSchemasRegistry { <# .SYNOPSIS Adds an AWS::EventSchemas::Registry resource to the template. Use the AWS::EventSchemas::Registry to specify a schema registry. Schema registries are containers for Schemas. Registries collect and organize schemas so that your schemas are in logical groups. .DESCRIPTION Adds an AWS::EventSchemas::Registry resource to the template. Use the AWS::EventSchemas::Registry to specify a schema registry. Schema registries are containers for Schemas. Registries collect and organize schemas so that your schemas are in logical groups. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-eventschemas-registry.html .PARAMETER LogicalId The logical ID must be alphanumeric (A-Za-z0-9) and unique within the template. Use the logical name to reference the resource in other parts of the template. For example, if you want to map an Amazon Elastic Block Store volume to an Amazon EC2 instance, you reference the logical IDs to associate the block stores with the instance. .PARAMETER Description A description of the registry to be created. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-eventschemas-registry.html#cfn-eventschemas-registry-description PrimitiveType: String UpdateType: Mutable .PARAMETER RegistryName The name of the schema registry. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-eventschemas-registry.html#cfn-eventschemas-registry-registryname PrimitiveType: String UpdateType: Immutable .PARAMETER Tags Tags to associate with the registry. Type: List Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-eventschemas-registry.html#cfn-eventschemas-registry-tags ItemType: TagsEntry UpdateType: Mutable .PARAMETER DeletionPolicy With the DeletionPolicy attribute you can preserve or (in some cases) backup a resource when its stack is deleted. You specify a DeletionPolicy attribute for each resource that you want to control. If a resource has no DeletionPolicy attribute, AWS CloudFormation deletes the resource by default. To keep a resource when its stack is deleted, specify Retain for that resource. You can use retain for any resource. For example, you can retain a nested stack, S3 bucket, or EC2 instance so that you can continue to use or modify those resources after you delete their stacks. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER UpdateReplacePolicy Use the UpdateReplacePolicy attribute to retain or (in some cases) backup the existing physical instance of a resource when it is replaced during a stack update operation. When you initiate a stack update, AWS CloudFormation updates resources based on differences between what you submit and the stack's current template and parameters. If you update a resource property that requires that the resource be replaced, AWS CloudFormation recreates the resource during the update. Recreating the resource generates a new physical ID. AWS CloudFormation creates the replacement resource first, and then changes references from other dependent resources to point to the replacement resource. By default, AWS CloudFormation then deletes the old resource. Using the UpdateReplacePolicy, you can specify that AWS CloudFormation retain or (in some cases) create a snapshot of the old resource. For resources that support snapshots, such as AWS::EC2::Volume, specify Snapshot to have AWS CloudFormation create a snapshot before deleting the old resource instance. You can apply the UpdateReplacePolicy attribute to any resource. UpdateReplacePolicy is only executed if you update a resource property whose update behavior is specified as Replacement, thereby causing AWS CloudFormation to replace the old resource with a new one with a new physical ID. For example, if you update the Engine property of an AWS::RDS::DBInstance resource type, AWS CloudFormation creates a new resource and replaces the current DB instance resource with the new one. The UpdateReplacePolicy attribute would then dictate whether AWS CloudFormation deleted, retained, or created a snapshot of the old DB instance. The update behavior for each property of a resource is specified in the reference topic for that resource in the AWS Resource and Property Types Reference. For more information on resource update behavior, see Update Behaviors of Stack Resources. The UpdateReplacePolicy attribute applies to stack updates you perform directly, as well as stack updates performed using change sets. Note Resources that are retained continue to exist and continue to incur applicable charges until you delete those resources. Snapshots that are created with this policy continue to exist and continue to incur applicable charges until you delete those snapshots. UpdateReplacePolicy retains the old physical resource or snapshot, but removes it from AWS CloudFormation's scope. UpdateReplacePolicy differs from the DeletionPolicy attribute in that it only applies to resources replaced during stack updates. Use DeletionPolicy for resources deleted when a stack is deleted, or when the resource definition itself is deleted from the template as part of a stack update. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER DependsOn With the DependsOn attribute you can specify that the creation of a specific resource follows another. When you add a DependsOn attribute to a resource, that resource is created only after the creation of the resource specified in the DependsOn attribute. This parameter takes a string or list of strings representing Logical IDs of resources that must be created prior to this resource being created. .PARAMETER Metadata The Metadata attribute enables you to associate structured data with a resource. By adding a Metadata attribute to a resource, you can add data in JSON or YAML to the resource declaration. In addition, you can use intrinsic functions (such as GetAtt and Ref), parameters, and pseudo parameters within the Metadata attribute to add those interpreted values. This will be returned when describing the resource using AWS CLI. .PARAMETER UpdatePolicy Use the UpdatePolicy attribute to specify how AWS CloudFormation handles updates to the AWS::AutoScaling::AutoScalingGroup resource. AWS CloudFormation invokes one of three update policies depending on the type of change you make or whether a scheduled action is associated with the Auto Scaling group. You must use the "Add-UpdatePolicy" function or the [UpdatePolicy] class here. .PARAMETER Condition Logical ID of the condition that this resource needs to be true in order for this resource to be provisioned. .FUNCTIONALITY Vaporshell #> [OutputType([EventSchemasRegistry])] [cmdletbinding()] Param( [parameter(Mandatory = $true,Position = 0)] [ValidateLogicalId()] [string] $LogicalId, [parameter(Mandatory = $false)] [object] $Description, [parameter(Mandatory = $false)] [object] $RegistryName, [parameter(Mandatory = $false)] [object] $Tags, [parameter()] [DeletionPolicy] $DeletionPolicy, [parameter()] [UpdateReplacePolicy] $UpdateReplacePolicy, [parameter(Mandatory = $false)] [string[]] $DependsOn, [parameter(Mandatory = $false)] [VSJson] $Metadata, [parameter(Mandatory = $false)] [UpdatePolicy] $UpdatePolicy, [parameter(Mandatory = $false)] [string] $Condition ) Process { $obj = [EventSchemasRegistry]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'New-VSEventSchemasRegistry' function New-VSEventSchemasRegistryPolicy { <# .SYNOPSIS Adds an AWS::EventSchemas::RegistryPolicy resource to the template. .DESCRIPTION Adds an AWS::EventSchemas::RegistryPolicy resource to the template. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-eventschemas-registrypolicy.html .PARAMETER LogicalId The logical ID must be alphanumeric (A-Za-z0-9) and unique within the template. Use the logical name to reference the resource in other parts of the template. For example, if you want to map an Amazon Elastic Block Store volume to an Amazon EC2 instance, you reference the logical IDs to associate the block stores with the instance. .PARAMETER Policy Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-eventschemas-registrypolicy.html#cfn-eventschemas-registrypolicy-policy UpdateType: Mutable PrimitiveType: Json .PARAMETER RegistryName Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-eventschemas-registrypolicy.html#cfn-eventschemas-registrypolicy-registryname UpdateType: Mutable PrimitiveType: String .PARAMETER RevisionId Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-eventschemas-registrypolicy.html#cfn-eventschemas-registrypolicy-revisionid UpdateType: Mutable PrimitiveType: String .PARAMETER DeletionPolicy With the DeletionPolicy attribute you can preserve or (in some cases) backup a resource when its stack is deleted. You specify a DeletionPolicy attribute for each resource that you want to control. If a resource has no DeletionPolicy attribute, AWS CloudFormation deletes the resource by default. To keep a resource when its stack is deleted, specify Retain for that resource. You can use retain for any resource. For example, you can retain a nested stack, S3 bucket, or EC2 instance so that you can continue to use or modify those resources after you delete their stacks. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER UpdateReplacePolicy Use the UpdateReplacePolicy attribute to retain or (in some cases) backup the existing physical instance of a resource when it is replaced during a stack update operation. When you initiate a stack update, AWS CloudFormation updates resources based on differences between what you submit and the stack's current template and parameters. If you update a resource property that requires that the resource be replaced, AWS CloudFormation recreates the resource during the update. Recreating the resource generates a new physical ID. AWS CloudFormation creates the replacement resource first, and then changes references from other dependent resources to point to the replacement resource. By default, AWS CloudFormation then deletes the old resource. Using the UpdateReplacePolicy, you can specify that AWS CloudFormation retain or (in some cases) create a snapshot of the old resource. For resources that support snapshots, such as AWS::EC2::Volume, specify Snapshot to have AWS CloudFormation create a snapshot before deleting the old resource instance. You can apply the UpdateReplacePolicy attribute to any resource. UpdateReplacePolicy is only executed if you update a resource property whose update behavior is specified as Replacement, thereby causing AWS CloudFormation to replace the old resource with a new one with a new physical ID. For example, if you update the Engine property of an AWS::RDS::DBInstance resource type, AWS CloudFormation creates a new resource and replaces the current DB instance resource with the new one. The UpdateReplacePolicy attribute would then dictate whether AWS CloudFormation deleted, retained, or created a snapshot of the old DB instance. The update behavior for each property of a resource is specified in the reference topic for that resource in the AWS Resource and Property Types Reference. For more information on resource update behavior, see Update Behaviors of Stack Resources. The UpdateReplacePolicy attribute applies to stack updates you perform directly, as well as stack updates performed using change sets. Note Resources that are retained continue to exist and continue to incur applicable charges until you delete those resources. Snapshots that are created with this policy continue to exist and continue to incur applicable charges until you delete those snapshots. UpdateReplacePolicy retains the old physical resource or snapshot, but removes it from AWS CloudFormation's scope. UpdateReplacePolicy differs from the DeletionPolicy attribute in that it only applies to resources replaced during stack updates. Use DeletionPolicy for resources deleted when a stack is deleted, or when the resource definition itself is deleted from the template as part of a stack update. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER DependsOn With the DependsOn attribute you can specify that the creation of a specific resource follows another. When you add a DependsOn attribute to a resource, that resource is created only after the creation of the resource specified in the DependsOn attribute. This parameter takes a string or list of strings representing Logical IDs of resources that must be created prior to this resource being created. .PARAMETER Metadata The Metadata attribute enables you to associate structured data with a resource. By adding a Metadata attribute to a resource, you can add data in JSON or YAML to the resource declaration. In addition, you can use intrinsic functions (such as GetAtt and Ref), parameters, and pseudo parameters within the Metadata attribute to add those interpreted values. This will be returned when describing the resource using AWS CLI. .PARAMETER UpdatePolicy Use the UpdatePolicy attribute to specify how AWS CloudFormation handles updates to the AWS::AutoScaling::AutoScalingGroup resource. AWS CloudFormation invokes one of three update policies depending on the type of change you make or whether a scheduled action is associated with the Auto Scaling group. You must use the "Add-UpdatePolicy" function or the [UpdatePolicy] class here. .PARAMETER Condition Logical ID of the condition that this resource needs to be true in order for this resource to be provisioned. .FUNCTIONALITY Vaporshell #> [OutputType([EventSchemasRegistryPolicy])] [cmdletbinding()] Param( [parameter(Mandatory = $true,Position = 0)] [ValidateLogicalId()] [string] $LogicalId, [parameter(Mandatory = $true)] [VSJson] $Policy, [parameter(Mandatory = $true)] [object] $RegistryName, [parameter(Mandatory = $false)] [object] $RevisionId, [parameter()] [DeletionPolicy] $DeletionPolicy, [parameter()] [UpdateReplacePolicy] $UpdateReplacePolicy, [parameter(Mandatory = $false)] [string[]] $DependsOn, [parameter(Mandatory = $false)] [VSJson] $Metadata, [parameter(Mandatory = $false)] [UpdatePolicy] $UpdatePolicy, [parameter(Mandatory = $false)] [string] $Condition ) Process { $obj = [EventSchemasRegistryPolicy]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'New-VSEventSchemasRegistryPolicy' function New-VSEventSchemasSchema { <# .SYNOPSIS Adds an AWS::EventSchemas::Schema resource to the template. Use the AWS::EventSchemas::Schema resource to specify an event schema. .DESCRIPTION Adds an AWS::EventSchemas::Schema resource to the template. Use the AWS::EventSchemas::Schema resource to specify an event schema. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-eventschemas-schema.html .PARAMETER LogicalId The logical ID must be alphanumeric (A-Za-z0-9) and unique within the template. Use the logical name to reference the resource in other parts of the template. For example, if you want to map an Amazon Elastic Block Store volume to an Amazon EC2 instance, you reference the logical IDs to associate the block stores with the instance. .PARAMETER Type The type of schema. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-eventschemas-schema.html#cfn-eventschemas-schema-type PrimitiveType: String UpdateType: Mutable .PARAMETER Description A description of the schema. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-eventschemas-schema.html#cfn-eventschemas-schema-description PrimitiveType: String UpdateType: Mutable .PARAMETER Content The source of the schema definition. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-eventschemas-schema.html#cfn-eventschemas-schema-content PrimitiveType: String UpdateType: Mutable .PARAMETER RegistryName The name of the schema registry. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-eventschemas-schema.html#cfn-eventschemas-schema-registryname PrimitiveType: String UpdateType: Immutable .PARAMETER SchemaName The name of the schema. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-eventschemas-schema.html#cfn-eventschemas-schema-schemaname PrimitiveType: String UpdateType: Immutable .PARAMETER Tags Tags associated with the schema. Type: List Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-eventschemas-schema.html#cfn-eventschemas-schema-tags ItemType: TagsEntry UpdateType: Mutable .PARAMETER DeletionPolicy With the DeletionPolicy attribute you can preserve or (in some cases) backup a resource when its stack is deleted. You specify a DeletionPolicy attribute for each resource that you want to control. If a resource has no DeletionPolicy attribute, AWS CloudFormation deletes the resource by default. To keep a resource when its stack is deleted, specify Retain for that resource. You can use retain for any resource. For example, you can retain a nested stack, S3 bucket, or EC2 instance so that you can continue to use or modify those resources after you delete their stacks. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER UpdateReplacePolicy Use the UpdateReplacePolicy attribute to retain or (in some cases) backup the existing physical instance of a resource when it is replaced during a stack update operation. When you initiate a stack update, AWS CloudFormation updates resources based on differences between what you submit and the stack's current template and parameters. If you update a resource property that requires that the resource be replaced, AWS CloudFormation recreates the resource during the update. Recreating the resource generates a new physical ID. AWS CloudFormation creates the replacement resource first, and then changes references from other dependent resources to point to the replacement resource. By default, AWS CloudFormation then deletes the old resource. Using the UpdateReplacePolicy, you can specify that AWS CloudFormation retain or (in some cases) create a snapshot of the old resource. For resources that support snapshots, such as AWS::EC2::Volume, specify Snapshot to have AWS CloudFormation create a snapshot before deleting the old resource instance. You can apply the UpdateReplacePolicy attribute to any resource. UpdateReplacePolicy is only executed if you update a resource property whose update behavior is specified as Replacement, thereby causing AWS CloudFormation to replace the old resource with a new one with a new physical ID. For example, if you update the Engine property of an AWS::RDS::DBInstance resource type, AWS CloudFormation creates a new resource and replaces the current DB instance resource with the new one. The UpdateReplacePolicy attribute would then dictate whether AWS CloudFormation deleted, retained, or created a snapshot of the old DB instance. The update behavior for each property of a resource is specified in the reference topic for that resource in the AWS Resource and Property Types Reference. For more information on resource update behavior, see Update Behaviors of Stack Resources. The UpdateReplacePolicy attribute applies to stack updates you perform directly, as well as stack updates performed using change sets. Note Resources that are retained continue to exist and continue to incur applicable charges until you delete those resources. Snapshots that are created with this policy continue to exist and continue to incur applicable charges until you delete those snapshots. UpdateReplacePolicy retains the old physical resource or snapshot, but removes it from AWS CloudFormation's scope. UpdateReplacePolicy differs from the DeletionPolicy attribute in that it only applies to resources replaced during stack updates. Use DeletionPolicy for resources deleted when a stack is deleted, or when the resource definition itself is deleted from the template as part of a stack update. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER DependsOn With the DependsOn attribute you can specify that the creation of a specific resource follows another. When you add a DependsOn attribute to a resource, that resource is created only after the creation of the resource specified in the DependsOn attribute. This parameter takes a string or list of strings representing Logical IDs of resources that must be created prior to this resource being created. .PARAMETER Metadata The Metadata attribute enables you to associate structured data with a resource. By adding a Metadata attribute to a resource, you can add data in JSON or YAML to the resource declaration. In addition, you can use intrinsic functions (such as GetAtt and Ref), parameters, and pseudo parameters within the Metadata attribute to add those interpreted values. This will be returned when describing the resource using AWS CLI. .PARAMETER UpdatePolicy Use the UpdatePolicy attribute to specify how AWS CloudFormation handles updates to the AWS::AutoScaling::AutoScalingGroup resource. AWS CloudFormation invokes one of three update policies depending on the type of change you make or whether a scheduled action is associated with the Auto Scaling group. You must use the "Add-UpdatePolicy" function or the [UpdatePolicy] class here. .PARAMETER Condition Logical ID of the condition that this resource needs to be true in order for this resource to be provisioned. .FUNCTIONALITY Vaporshell #> [OutputType([EventSchemasSchema])] [cmdletbinding()] Param( [parameter(Mandatory = $true,Position = 0)] [ValidateLogicalId()] [string] $LogicalId, [parameter(Mandatory = $true)] [object] $Type, [parameter(Mandatory = $false)] [object] $Description, [parameter(Mandatory = $true)] [object] $Content, [parameter(Mandatory = $true)] [object] $RegistryName, [parameter(Mandatory = $false)] [object] $SchemaName, [parameter(Mandatory = $false)] [object] $Tags, [parameter()] [DeletionPolicy] $DeletionPolicy, [parameter()] [UpdateReplacePolicy] $UpdateReplacePolicy, [parameter(Mandatory = $false)] [string[]] $DependsOn, [parameter(Mandatory = $false)] [VSJson] $Metadata, [parameter(Mandatory = $false)] [UpdatePolicy] $UpdatePolicy, [parameter(Mandatory = $false)] [string] $Condition ) Process { $obj = [EventSchemasSchema]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'New-VSEventSchemasSchema' |