VaporShell.CodePipeline.psm1
|
# PSM1 Contents function Format-Json { [CmdletBinding()] Param ( [Parameter(Mandatory = $true, Position = 0, ValueFromPipeline = $true)] [String] $Json ) Begin { $cleaner = { param([String]$Line) Process{ [Regex]::Replace( $Line, "\\u(?<Value>[a-zA-Z0-9]{4})", { param($m)([char]([int]::Parse( $m.Groups['Value'].Value, [System.Globalization.NumberStyles]::HexNumber ))).ToString() } ) } } } Process { if ($PSVersionTable.PSVersion.Major -lt 6) { try { $indent = 0; $res = $Json -split '\n' | ForEach-Object { if ($_ -match '[\}\]]') { # This line contains ] or }, decrement the indentation level $indent-- } $line = (' ' * $indent * 2) + $_.TrimStart().Replace(': ', ': ') if ($_ -match '[\{\[]') { # This line contains [ or {, increment the indentation level $indent++ } $cleaner.Invoke($line) } $res -join "`n" } catch { ($Json -split '\n' | ForEach-Object {$cleaner.Invoke($_)}) -join "`n" } } else { ($Json -split '\n' | ForEach-Object {$cleaner.Invoke($_)}) -join "`n" } } } function Get-TrueCount { Param ( [parameter(Mandatory = $false,Position = 0,ValueFromPipeline = $true)] $Array ) Process { if ($array) { if ($array.Count) { $count = $array.Count } else { $count = 1 } } else { $count = 0 } } End { return $count } } function New-VSError { <# .SYNOPSIS Error generator function to use in tandem with $PSCmdlet.ThrowTerminatingError() .PARAMETER Result Allows input of an error from AWS SDK, resulting in the Exception message being parsed out. .PARAMETER String Used to create basic String message errors in the same wrapper #> [cmdletbinding(DefaultParameterSetName="Result")] param( [parameter(Position=0,ParameterSetName="Result")] $Result, [parameter(Position=0,ParameterSetName="String")] $String ) switch ($PSCmdlet.ParameterSetName) { Result { $Exception = "$($result.Exception.InnerException.Message)" } String { $Exception = "$String" } } $e = New-Object "System.Exception" $Exception $errorRecord = New-Object 'System.Management.Automation.ErrorRecord' $e, $null, ([System.Management.Automation.ErrorCategory]::InvalidOperation), $null return $errorRecord } function ResolveS3Endpoint { <# .SYNOPSIS Resolves the S3 endpoint most appropriate for each region. #> Param ( [parameter(Mandatory=$true,Position=0)] [ValidateSet("eu-west-2","ap-south-1","us-east-2","sa-east-1","us-west-1","us-west-2","eu-west-1","ap-southeast-2","ca-central-1","ap-northeast-2","us-east-1","eu-central-1","ap-southeast-1","ap-northeast-1")] [String] $Region ) $endpointMap = @{ "us-east-2" = "s3.us-east-2.amazonaws.com" "us-east-1" = "s3.amazonaws.com" "us-west-1" = "s3-us-west-1.amazonaws.com" "us-west-2" = "s3-us-west-2.amazonaws.com" "ca-central-1" = "s3.ca-central-1.amazonaws.com" "ap-south-1" = "s3.ap-south-1.amazonaws.com" "ap-northeast-2" = "s3.ap-northeast-2.amazonaws.com" "ap-southeast-1" = "s3-ap-southeast-1.amazonaws.com" "ap-southeast-2" = "s3-ap-southeast-2.amazonaws.com" "ap-northeast-1" = "s3-ap-northeast-1.amazonaws.com" "eu-central-1" = "s3.eu-central-1.amazonaws.com" "eu-west-1" = "s3-eu-west-1.amazonaws.com" "eu-west-2" = "s3.eu-west-2.amazonaws.com" "sa-east-1" = "s3-sa-east-1.amazonaws.com" } return $endpointMap[$Region] } function Add-VSCodePipelineCustomActionTypeArtifactDetails { <# .SYNOPSIS Adds an AWS::CodePipeline::CustomActionType.ArtifactDetails resource property to the template. Returns information about the details of an artifact. .DESCRIPTION Adds an AWS::CodePipeline::CustomActionType.ArtifactDetails resource property to the template. Returns information about the details of an artifact. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-codepipeline-customactiontype-artifactdetails.html .PARAMETER MaximumCount The maximum number of artifacts allowed for the action type. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-codepipeline-customactiontype-artifactdetails.html#cfn-codepipeline-customactiontype-artifactdetails-maximumcount PrimitiveType: Integer UpdateType: Mutable .PARAMETER MinimumCount The minimum number of artifacts allowed for the action type. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-codepipeline-customactiontype-artifactdetails.html#cfn-codepipeline-customactiontype-artifactdetails-minimumcount PrimitiveType: Integer UpdateType: Mutable .FUNCTIONALITY Vaporshell #> [OutputType([CodePipelineCustomActionTypeArtifactDetails])] [cmdletbinding()] Param( [parameter(Mandatory = $true)] [object] $MaximumCount, [parameter(Mandatory = $true)] [object] $MinimumCount ) Process { $obj = [CodePipelineCustomActionTypeArtifactDetails]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSCodePipelineCustomActionTypeArtifactDetails' function Add-VSCodePipelineCustomActionTypeConfigurationProperties { <# .SYNOPSIS Adds an AWS::CodePipeline::CustomActionType.ConfigurationProperties resource property to the template. The configuration properties for the custom action. .DESCRIPTION Adds an AWS::CodePipeline::CustomActionType.ConfigurationProperties resource property to the template. The configuration properties for the custom action. **Note** You can refer to a name in the configuration properties of the custom action within the URL templates by following the format of {Config:name}, as long as the configuration property is both required and not secret. For more information, see Create a Custom Action for a Pipeline: https://docs.aws.amazon.com/codepipeline/latest/userguide/how-to-create-custom-action.html. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-codepipeline-customactiontype-configurationproperties.html .PARAMETER Description The description of the action configuration property that is displayed to users. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-codepipeline-customactiontype-configurationproperties.html#cfn-codepipeline-customactiontype-configurationproperties-description PrimitiveType: String UpdateType: Mutable .PARAMETER Key Whether the configuration property is a key. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-codepipeline-customactiontype-configurationproperties.html#cfn-codepipeline-customactiontype-configurationproperties-key PrimitiveType: Boolean UpdateType: Mutable .PARAMETER Name The name of the action configuration property. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-codepipeline-customactiontype-configurationproperties.html#cfn-codepipeline-customactiontype-configurationproperties-name PrimitiveType: String UpdateType: Mutable .PARAMETER Queryable Indicates that the property is used with PollForJobs. When creating a custom action, an action can have up to one queryable property. If it has one, that property must be both required and not secret. If you create a pipeline with a custom action type, and that custom action contains a queryable property, the value for that configuration property is subject to other restrictions. The value must be less than or equal to twenty 20 characters. The value can contain only alphanumeric characters, underscores, and hyphens. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-codepipeline-customactiontype-configurationproperties.html#cfn-codepipeline-customactiontype-configurationproperties-queryable PrimitiveType: Boolean UpdateType: Mutable .PARAMETER Required Whether the configuration property is a required value. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-codepipeline-customactiontype-configurationproperties.html#cfn-codepipeline-customactiontype-configurationproperties-required PrimitiveType: Boolean UpdateType: Mutable .PARAMETER Secret Whether the configuration property is secret. Secrets are hidden from all calls except for GetJobDetails, GetThirdPartyJobDetails, PollForJobs, and PollForThirdPartyJobs. When updating a pipeline, passing * * * * * without changing any other values of the action preserves the previous value of the secret. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-codepipeline-customactiontype-configurationproperties.html#cfn-codepipeline-customactiontype-configurationproperties-secret PrimitiveType: Boolean UpdateType: Mutable .PARAMETER Type The type of the configuration property. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-codepipeline-customactiontype-configurationproperties.html#cfn-codepipeline-customactiontype-configurationproperties-type PrimitiveType: String UpdateType: Mutable .FUNCTIONALITY Vaporshell #> [OutputType([CodePipelineCustomActionTypeConfigurationProperties])] [cmdletbinding()] Param( [parameter(Mandatory = $false)] [object] $Description, [parameter(Mandatory = $true)] [object] $Key, [parameter(Mandatory = $true)] [object] $Name, [parameter(Mandatory = $false)] [object] $Queryable, [parameter(Mandatory = $true)] [object] $Required, [parameter(Mandatory = $true)] [object] $Secret, [parameter(Mandatory = $false)] [object] $Type ) Process { $obj = [CodePipelineCustomActionTypeConfigurationProperties]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSCodePipelineCustomActionTypeConfigurationProperties' function Add-VSCodePipelineCustomActionTypeSettings { <# .SYNOPSIS Adds an AWS::CodePipeline::CustomActionType.Settings resource property to the template. Settings is a property of the AWS::CodePipeline::CustomActionType resource that provides URLs that users can access to view information about the CodePipeline custom action. .DESCRIPTION Adds an AWS::CodePipeline::CustomActionType.Settings resource property to the template. Settings is a property of the AWS::CodePipeline::CustomActionType resource that provides URLs that users can access to view information about the CodePipeline custom action. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-codepipeline-customactiontype-settings.html .PARAMETER EntityUrlTemplate The URL returned to the AWS CodePipeline console that provides a deep link to the resources of the external system, such as the configuration page for an AWS CodeDeploy deployment group. This link is provided as part of the action display in the pipeline. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-codepipeline-customactiontype-settings.html#cfn-codepipeline-customactiontype-settings-entityurltemplate PrimitiveType: String UpdateType: Mutable .PARAMETER ExecutionUrlTemplate The URL returned to the AWS CodePipeline console that contains a link to the top-level landing page for the external system, such as the console page for AWS CodeDeploy. This link is shown on the pipeline view page in the AWS CodePipeline console and provides a link to the execution entity of the external action. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-codepipeline-customactiontype-settings.html#cfn-codepipeline-customactiontype-settings-executionurltemplate PrimitiveType: String UpdateType: Mutable .PARAMETER RevisionUrlTemplate The URL returned to the AWS CodePipeline console that contains a link to the page where customers can update or change the configuration of the external action. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-codepipeline-customactiontype-settings.html#cfn-codepipeline-customactiontype-settings-revisionurltemplate PrimitiveType: String UpdateType: Mutable .PARAMETER ThirdPartyConfigurationUrl The URL of a sign-up page where users can sign up for an external service and perform initial configuration of the action provided by that service. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-codepipeline-customactiontype-settings.html#cfn-codepipeline-customactiontype-settings-thirdpartyconfigurationurl PrimitiveType: String UpdateType: Mutable .FUNCTIONALITY Vaporshell #> [OutputType([CodePipelineCustomActionTypeSettings])] [cmdletbinding()] Param( [parameter(Mandatory = $false)] [object] $EntityUrlTemplate, [parameter(Mandatory = $false)] [object] $ExecutionUrlTemplate, [parameter(Mandatory = $false)] [object] $RevisionUrlTemplate, [parameter(Mandatory = $false)] [object] $ThirdPartyConfigurationUrl ) Process { $obj = [CodePipelineCustomActionTypeSettings]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSCodePipelineCustomActionTypeSettings' function Add-VSCodePipelinePipelineActionDeclaration { <# .SYNOPSIS Adds an AWS::CodePipeline::Pipeline.ActionDeclaration resource property to the template. Represents information about an action declaration. .DESCRIPTION Adds an AWS::CodePipeline::Pipeline.ActionDeclaration resource property to the template. Represents information about an action declaration. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-codepipeline-pipeline-stages-actions.html .PARAMETER ActionTypeId Specifies the action type and the provider of the action. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-codepipeline-pipeline-stages-actions.html#cfn-codepipeline-pipeline-stages-actions-actiontypeid Type: ActionTypeId UpdateType: Mutable .PARAMETER Configuration The action's configuration. These are key-value pairs that specify input values for an action. For more information, see Action Structure Requirements in CodePipeline: https://docs.aws.amazon.com/codepipeline/latest/userguide/reference-pipeline-structure.html#action-requirements. For the list of configuration properties for the AWS CloudFormation action type in CodePipeline, see Configuration Properties Reference: https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/continuous-delivery-codepipeline-action-reference.html in the *AWS CloudFormation User Guide*. For template snippets with examples, see Using Parameter Override Functions with CodePipeline Pipelines: https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/continuous-delivery-codepipeline-parameter-override-functions.html in the *AWS CloudFormation User Guide*. The values can be represented in either JSON or YAML format. For example, the JSON configuration item format is as follows: *JSON:* "Configuration" : { Key : Value }, Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-codepipeline-pipeline-stages-actions.html#cfn-codepipeline-pipeline-stages-actions-configuration PrimitiveType: Json UpdateType: Mutable .PARAMETER InputArtifacts The name or ID of the artifact consumed by the action, such as a test or build artifact. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-codepipeline-pipeline-stages-actions.html#cfn-codepipeline-pipeline-stages-actions-inputartifacts DuplicatesAllowed: False ItemType: InputArtifact Type: List UpdateType: Mutable .PARAMETER Name The action declaration's name. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-codepipeline-pipeline-stages-actions.html#cfn-codepipeline-pipeline-stages-actions-name PrimitiveType: String UpdateType: Mutable .PARAMETER Namespace The variable namespace associated with the action. All variables produced as output by this action fall under this namespace. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-codepipeline-pipeline-stages-actions.html#cfn-codepipeline-pipeline-actiondeclaration-namespace PrimitiveType: String UpdateType: Mutable .PARAMETER OutputArtifacts The name or ID of the result of the action declaration, such as a test or build artifact. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-codepipeline-pipeline-stages-actions.html#cfn-codepipeline-pipeline-stages-actions-outputartifacts DuplicatesAllowed: False ItemType: OutputArtifact Type: List UpdateType: Mutable .PARAMETER Region The action declaration's AWS Region, such as us-east-1. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-codepipeline-pipeline-stages-actions.html#cfn-codepipeline-pipeline-stages-actions-region PrimitiveType: String UpdateType: Mutable .PARAMETER RoleArn The ARN of the IAM service role that performs the declared action. This is assumed through the roleArn for the pipeline. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-codepipeline-pipeline-stages-actions.html#cfn-codepipeline-pipeline-stages-actions-rolearn PrimitiveType: String UpdateType: Mutable .PARAMETER RunOrder The order in which actions are run. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-codepipeline-pipeline-stages-actions.html#cfn-codepipeline-pipeline-stages-actions-runorder PrimitiveType: Integer UpdateType: Mutable .FUNCTIONALITY Vaporshell #> [OutputType([CodePipelinePipelineActionDeclaration])] [cmdletbinding()] Param( [parameter(Mandatory = $true)] $ActionTypeId, [parameter(Mandatory = $false)] [VSJson] $Configuration, [parameter(Mandatory = $false)] [object] $InputArtifacts, [parameter(Mandatory = $true)] [object] $Name, [parameter(Mandatory = $false)] [object] $Namespace, [parameter(Mandatory = $false)] [object] $OutputArtifacts, [parameter(Mandatory = $false)] [object] $Region, [parameter(Mandatory = $false)] [object] $RoleArn, [parameter(Mandatory = $false)] [object] $RunOrder ) Process { $obj = [CodePipelinePipelineActionDeclaration]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSCodePipelinePipelineActionDeclaration' function Add-VSCodePipelinePipelineActionTypeId { <# .SYNOPSIS Adds an AWS::CodePipeline::Pipeline.ActionTypeId resource property to the template. Represents information about an action type. .DESCRIPTION Adds an AWS::CodePipeline::Pipeline.ActionTypeId resource property to the template. Represents information about an action type. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-codepipeline-pipeline-stages-actions-actiontypeid.html .PARAMETER Category A category defines what kind of action can be taken in the stage, and constrains the provider type for the action. Valid categories are limited to one of the values below. + Source + Build + Test + Deploy + Invoke + Approval Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-codepipeline-pipeline-stages-actions-actiontypeid.html#cfn-codepipeline-pipeline-stages-actions-actiontypeid-category PrimitiveType: String UpdateType: Mutable .PARAMETER Owner The creator of the action being called. There are three valid values for the Owner field in the action category section within your pipeline structure: AWS, ThirdParty, and Custom. For more information, see Valid Action Types and Providers in CodePipeline: https://docs.aws.amazon.com/codepipeline/latest/userguide/reference-pipeline-structure.html#actions-valid-providers. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-codepipeline-pipeline-stages-actions-actiontypeid.html#cfn-codepipeline-pipeline-stages-actions-actiontypeid-owner PrimitiveType: String UpdateType: Mutable .PARAMETER Provider The provider of the service being called by the action. Valid providers are determined by the action category. For example, an action in the Deploy category type might have a provider of AWS CodeDeploy, which would be specified as CodeDeploy. For more information, see Valid Action Types and Providers in CodePipeline: https://docs.aws.amazon.com/codepipeline/latest/userguide/reference-pipeline-structure.html#actions-valid-providers. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-codepipeline-pipeline-stages-actions-actiontypeid.html#cfn-codepipeline-pipeline-stages-actions-actiontypeid-provider PrimitiveType: String UpdateType: Mutable .PARAMETER Version A string that describes the action version. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-codepipeline-pipeline-stages-actions-actiontypeid.html#cfn-codepipeline-pipeline-stages-actions-actiontypeid-version PrimitiveType: String UpdateType: Mutable .FUNCTIONALITY Vaporshell #> [OutputType([CodePipelinePipelineActionTypeId])] [cmdletbinding()] Param( [parameter(Mandatory = $true)] [object] $Category, [parameter(Mandatory = $true)] [object] $Owner, [parameter(Mandatory = $true)] [object] $Provider, [parameter(Mandatory = $true)] [object] $Version ) Process { $obj = [CodePipelinePipelineActionTypeId]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSCodePipelinePipelineActionTypeId' function Add-VSCodePipelinePipelineArtifactStore { <# .SYNOPSIS Adds an AWS::CodePipeline::Pipeline.ArtifactStore resource property to the template. The S3 bucket where artifacts for the pipeline are stored. .DESCRIPTION Adds an AWS::CodePipeline::Pipeline.ArtifactStore resource property to the template. The S3 bucket where artifacts for the pipeline are stored. **Note** You must include either artifactStore or artifactStores in your pipeline, but you cannot use both. If you create a cross-region action in your pipeline, you must use artifactStores. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-codepipeline-pipeline-artifactstore.html .PARAMETER EncryptionKey The encryption key used to encrypt the data in the artifact store, such as an AWS Key Management Service AWS KMS key. If this is undefined, the default key for Amazon S3 is used. To see an example artifact store encryption key field, see the example structure here: AWS::CodePipeline::Pipeline: https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-codepipeline-pipeline.html. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-codepipeline-pipeline-artifactstore.html#cfn-codepipeline-pipeline-artifactstore-encryptionkey Type: EncryptionKey UpdateType: Mutable .PARAMETER Location The S3 bucket used for storing the artifacts for a pipeline. You can specify the name of an S3 bucket but not a folder in the bucket. A folder to contain the pipeline artifacts is created for you based on the name of the pipeline. You can use any S3 bucket in the same AWS Region as the pipeline to store your pipeline artifacts. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-codepipeline-pipeline-artifactstore.html#cfn-codepipeline-pipeline-artifactstore-location PrimitiveType: String UpdateType: Mutable .PARAMETER Type The type of the artifact store, such as S3. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-codepipeline-pipeline-artifactstore.html#cfn-codepipeline-pipeline-artifactstore-type PrimitiveType: String UpdateType: Mutable .FUNCTIONALITY Vaporshell #> [OutputType([CodePipelinePipelineArtifactStore])] [cmdletbinding()] Param( [parameter(Mandatory = $false)] $EncryptionKey, [parameter(Mandatory = $true)] [object] $Location, [parameter(Mandatory = $true)] [object] $Type ) Process { $obj = [CodePipelinePipelineArtifactStore]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSCodePipelinePipelineArtifactStore' function Add-VSCodePipelinePipelineArtifactStoreMap { <# .SYNOPSIS Adds an AWS::CodePipeline::Pipeline.ArtifactStoreMap resource property to the template. A mapping of artifactStore objects and their corresponding AWS Regions. There must be an artifact store for the pipeline Region and for each cross-region action in the pipeline. .DESCRIPTION Adds an AWS::CodePipeline::Pipeline.ArtifactStoreMap resource property to the template. A mapping of artifactStore objects and their corresponding AWS Regions. There must be an artifact store for the pipeline Region and for each cross-region action in the pipeline. **Note** You must include either artifactStore or artifactStores in your pipeline, but you cannot use both. If you create a cross-region action in your pipeline, you must use artifactStores. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-codepipeline-pipeline-artifactstoremap.html .PARAMETER ArtifactStore Represents information about the S3 bucket where artifacts are stored for the pipeline. You must include either artifactStore or artifactStores in your pipeline, but you cannot use both. If you create a cross-region action in your pipeline, you must use artifactStores. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-codepipeline-pipeline-artifactstoremap.html#cfn-codepipeline-pipeline-artifactstoremap-artifactstore Type: ArtifactStore UpdateType: Mutable .PARAMETER Region The action declaration's AWS Region, such as us-east-1. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-codepipeline-pipeline-artifactstoremap.html#cfn-codepipeline-pipeline-artifactstoremap-region PrimitiveType: String UpdateType: Mutable .FUNCTIONALITY Vaporshell #> [OutputType([CodePipelinePipelineArtifactStoreMap])] [cmdletbinding()] Param( [parameter(Mandatory = $true)] $ArtifactStore, [parameter(Mandatory = $true)] [object] $Region ) Process { $obj = [CodePipelinePipelineArtifactStoreMap]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSCodePipelinePipelineArtifactStoreMap' function Add-VSCodePipelinePipelineBlockerDeclaration { <# .SYNOPSIS Adds an AWS::CodePipeline::Pipeline.BlockerDeclaration resource property to the template. Reserved for future use. .DESCRIPTION Adds an AWS::CodePipeline::Pipeline.BlockerDeclaration resource property to the template. Reserved for future use. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-codepipeline-pipeline-stages-blockers.html .PARAMETER Name Reserved for future use. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-codepipeline-pipeline-stages-blockers.html#cfn-codepipeline-pipeline-stages-blockers-name PrimitiveType: String UpdateType: Mutable .PARAMETER Type Reserved for future use. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-codepipeline-pipeline-stages-blockers.html#cfn-codepipeline-pipeline-stages-blockers-type PrimitiveType: String UpdateType: Mutable .FUNCTIONALITY Vaporshell #> [OutputType([CodePipelinePipelineBlockerDeclaration])] [cmdletbinding()] Param( [parameter(Mandatory = $true)] [object] $Name, [parameter(Mandatory = $true)] [object] $Type ) Process { $obj = [CodePipelinePipelineBlockerDeclaration]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSCodePipelinePipelineBlockerDeclaration' function Add-VSCodePipelinePipelineEncryptionKey { <# .SYNOPSIS Adds an AWS::CodePipeline::Pipeline.EncryptionKey resource property to the template. Represents information about the key used to encrypt data in the artifact store, such as an AWS Key Management Service (AWS KMS key. .DESCRIPTION Adds an AWS::CodePipeline::Pipeline.EncryptionKey resource property to the template. Represents information about the key used to encrypt data in the artifact store, such as an AWS Key Management Service (AWS KMS key. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-codepipeline-pipeline-artifactstore-encryptionkey.html .PARAMETER Id The ID used to identify the key. For an AWS KMS key, you can use the key ID, the key ARN, or the alias ARN. Aliases are recognized only in the account that created the customer master key CMK. For cross-account actions, you can only use the key ID or key ARN to identify the key. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-codepipeline-pipeline-artifactstore-encryptionkey.html#cfn-codepipeline-pipeline-artifactstore-encryptionkey-id PrimitiveType: String UpdateType: Mutable .PARAMETER Type The type of encryption key, such as an AWS Key Management Service AWS KMS key. When creating or updating a pipeline, the value must be set to 'KMS'. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-codepipeline-pipeline-artifactstore-encryptionkey.html#cfn-codepipeline-pipeline-artifactstore-encryptionkey-type PrimitiveType: String UpdateType: Mutable .FUNCTIONALITY Vaporshell #> [OutputType([CodePipelinePipelineEncryptionKey])] [cmdletbinding()] Param( [parameter(Mandatory = $true)] [object] $Id, [parameter(Mandatory = $true)] [object] $Type ) Process { $obj = [CodePipelinePipelineEncryptionKey]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSCodePipelinePipelineEncryptionKey' function Add-VSCodePipelinePipelineInputArtifact { <# .SYNOPSIS Adds an AWS::CodePipeline::Pipeline.InputArtifact resource property to the template. Represents information about an artifact to be worked on, such as a test or build artifact. .DESCRIPTION Adds an AWS::CodePipeline::Pipeline.InputArtifact resource property to the template. Represents information about an artifact to be worked on, such as a test or build artifact. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-codepipeline-pipeline-stages-actions-inputartifacts.html .PARAMETER Name The name of the artifact to be worked on for example, "My App". The input artifact of an action must exactly match the output artifact declared in a preceding action, but the input artifact does not have to be the next action in strict sequence from the action that provided the output artifact. Actions in parallel can declare different output artifacts, which are in turn consumed by different following actions. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-codepipeline-pipeline-stages-actions-inputartifacts.html#cfn-codepipeline-pipeline-stages-actions-inputartifacts-name PrimitiveType: String UpdateType: Mutable .FUNCTIONALITY Vaporshell #> [OutputType([CodePipelinePipelineInputArtifact])] [cmdletbinding()] Param( [parameter(Mandatory = $true)] [object] $Name ) Process { $obj = [CodePipelinePipelineInputArtifact]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSCodePipelinePipelineInputArtifact' function Add-VSCodePipelinePipelineOutputArtifact { <# .SYNOPSIS Adds an AWS::CodePipeline::Pipeline.OutputArtifact resource property to the template. Represents information about the output of an action. .DESCRIPTION Adds an AWS::CodePipeline::Pipeline.OutputArtifact resource property to the template. Represents information about the output of an action. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-codepipeline-pipeline-stages-actions-outputartifacts.html .PARAMETER Name The name of the output of an artifact, such as "My App". The input artifact of an action must exactly match the output artifact declared in a preceding action, but the input artifact does not have to be the next action in strict sequence from the action that provided the output artifact. Actions in parallel can declare different output artifacts, which are in turn consumed by different following actions. Output artifact names must be unique within a pipeline. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-codepipeline-pipeline-stages-actions-outputartifacts.html#cfn-codepipeline-pipeline-stages-actions-outputartifacts-name PrimitiveType: String UpdateType: Mutable .FUNCTIONALITY Vaporshell #> [OutputType([CodePipelinePipelineOutputArtifact])] [cmdletbinding()] Param( [parameter(Mandatory = $true)] [object] $Name ) Process { $obj = [CodePipelinePipelineOutputArtifact]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSCodePipelinePipelineOutputArtifact' function Add-VSCodePipelinePipelineStageDeclaration { <# .SYNOPSIS Adds an AWS::CodePipeline::Pipeline.StageDeclaration resource property to the template. Represents information about a stage and its definition. .DESCRIPTION Adds an AWS::CodePipeline::Pipeline.StageDeclaration resource property to the template. Represents information about a stage and its definition. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-codepipeline-pipeline-stages.html .PARAMETER Actions The actions included in a stage. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-codepipeline-pipeline-stages.html#cfn-codepipeline-pipeline-stages-actions DuplicatesAllowed: False ItemType: ActionDeclaration Type: List UpdateType: Mutable .PARAMETER Blockers Reserved for future use. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-codepipeline-pipeline-stages.html#cfn-codepipeline-pipeline-stages-blockers DuplicatesAllowed: False ItemType: BlockerDeclaration Type: List UpdateType: Mutable .PARAMETER Name The name of the stage. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-codepipeline-pipeline-stages.html#cfn-codepipeline-pipeline-stages-name PrimitiveType: String UpdateType: Mutable .FUNCTIONALITY Vaporshell #> [OutputType([CodePipelinePipelineStageDeclaration])] [cmdletbinding()] Param( [parameter(Mandatory = $true)] [object] $Actions, [parameter(Mandatory = $false)] [object] $Blockers, [parameter(Mandatory = $true)] [object] $Name ) Process { $obj = [CodePipelinePipelineStageDeclaration]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSCodePipelinePipelineStageDeclaration' function Add-VSCodePipelinePipelineStageTransition { <# .SYNOPSIS Adds an AWS::CodePipeline::Pipeline.StageTransition resource property to the template. The name of the pipeline in which you want to disable the flow of artifacts from one stage to another. .DESCRIPTION Adds an AWS::CodePipeline::Pipeline.StageTransition resource property to the template. The name of the pipeline in which you want to disable the flow of artifacts from one stage to another. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-codepipeline-pipeline-disableinboundstagetransitions.html .PARAMETER Reason The reason given to the user that a stage is disabled, such as waiting for manual approval or manual tests. This message is displayed in the pipeline console UI. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-codepipeline-pipeline-disableinboundstagetransitions.html#cfn-codepipeline-pipeline-disableinboundstagetransitions-reason PrimitiveType: String UpdateType: Mutable .PARAMETER StageName The name of the stage where you want to disable the inbound or outbound transition of artifacts. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-codepipeline-pipeline-disableinboundstagetransitions.html#cfn-codepipeline-pipeline-disableinboundstagetransitions-stagename PrimitiveType: String UpdateType: Mutable .FUNCTIONALITY Vaporshell #> [OutputType([CodePipelinePipelineStageTransition])] [cmdletbinding()] Param( [parameter(Mandatory = $true)] [object] $Reason, [parameter(Mandatory = $true)] [object] $StageName ) Process { $obj = [CodePipelinePipelineStageTransition]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSCodePipelinePipelineStageTransition' function Add-VSCodePipelineWebhookWebhookAuthConfiguration { <# .SYNOPSIS Adds an AWS::CodePipeline::Webhook.WebhookAuthConfiguration resource property to the template. The authentication applied to incoming webhook trigger requests. .DESCRIPTION Adds an AWS::CodePipeline::Webhook.WebhookAuthConfiguration resource property to the template. The authentication applied to incoming webhook trigger requests. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-codepipeline-webhook-webhookauthconfiguration.html .PARAMETER AllowedIPRange The property used to configure acceptance of webhooks in an IP address range. For IP, only the AllowedIPRange property must be set. This property must be set to a valid CIDR range. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-codepipeline-webhook-webhookauthconfiguration.html#cfn-codepipeline-webhook-webhookauthconfiguration-allowediprange PrimitiveType: String UpdateType: Mutable .PARAMETER SecretToken The property used to configure GitHub authentication. For GITHUB_HMAC, only the SecretToken property must be set. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-codepipeline-webhook-webhookauthconfiguration.html#cfn-codepipeline-webhook-webhookauthconfiguration-secrettoken PrimitiveType: String UpdateType: Mutable .FUNCTIONALITY Vaporshell #> [OutputType([CodePipelineWebhookWebhookAuthConfiguration])] [cmdletbinding()] Param( [parameter(Mandatory = $false)] [object] $AllowedIPRange, [parameter(Mandatory = $false)] [object] $SecretToken ) Process { $obj = [CodePipelineWebhookWebhookAuthConfiguration]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSCodePipelineWebhookWebhookAuthConfiguration' function Add-VSCodePipelineWebhookWebhookFilterRule { <# .SYNOPSIS Adds an AWS::CodePipeline::Webhook.WebhookFilterRule resource property to the template. The event criteria that specify when a webhook notification is sent to your URL. .DESCRIPTION Adds an AWS::CodePipeline::Webhook.WebhookFilterRule resource property to the template. The event criteria that specify when a webhook notification is sent to your URL. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-codepipeline-webhook-webhookfilterrule.html .PARAMETER JsonPath A JsonPath expression that is applied to the body/payload of the webhook. The value selected by the JsonPath expression must match the value specified in the MatchEquals field. Otherwise, the request is ignored. For more information, see Java JsonPath implementation: https://github.com/json-path/JsonPath in GitHub. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-codepipeline-webhook-webhookfilterrule.html#cfn-codepipeline-webhook-webhookfilterrule-jsonpath PrimitiveType: String UpdateType: Mutable .PARAMETER MatchEquals The value selected by the JsonPath expression must match what is supplied in the MatchEquals field. Otherwise, the request is ignored. Properties from the target action configuration can be included as placeholders in this value by surrounding the action configuration key with curly brackets. For example, if the value supplied here is "refs/heads/{Branch}" and the target action has an action configuration property called "Branch" with a value of "master", the MatchEquals value is evaluated as "refs/heads/master". For a list of action configuration properties for built-in action types, see Pipeline Structure Reference Action Requirements: https://docs.aws.amazon.com/codepipeline/latest/userguide/reference-pipeline-structure.html#action-requirements. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-codepipeline-webhook-webhookfilterrule.html#cfn-codepipeline-webhook-webhookfilterrule-matchequals PrimitiveType: String UpdateType: Mutable .FUNCTIONALITY Vaporshell #> [OutputType([CodePipelineWebhookWebhookFilterRule])] [cmdletbinding()] Param( [parameter(Mandatory = $true)] [object] $JsonPath, [parameter(Mandatory = $false)] [object] $MatchEquals ) Process { $obj = [CodePipelineWebhookWebhookFilterRule]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSCodePipelineWebhookWebhookFilterRule' function New-VSCodePipelineCustomActionType { <# .SYNOPSIS Adds an AWS::CodePipeline::CustomActionType resource to the template. The AWS::CodePipeline::CustomActionType resource creates a custom action for activities that aren't included in the CodePipeline default actions, such as running an internally developed build process or a test suite. You can use these custom actions in the stage of a pipeline. For more information, see Create and Add a Custom Action in AWS CodePipeline: https://docs.aws.amazon.com/codepipeline/latest/userguide/how-to-create-custom-action.html in the *AWS CodePipeline User Guide*. .DESCRIPTION Adds an AWS::CodePipeline::CustomActionType resource to the template. The AWS::CodePipeline::CustomActionType resource creates a custom action for activities that aren't included in the CodePipeline default actions, such as running an internally developed build process or a test suite. You can use these custom actions in the stage of a pipeline. For more information, see Create and Add a Custom Action in AWS CodePipeline: https://docs.aws.amazon.com/codepipeline/latest/userguide/how-to-create-custom-action.html in the *AWS CodePipeline User Guide*. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-codepipeline-customactiontype.html .PARAMETER LogicalId The logical ID must be alphanumeric (A-Za-z0-9) and unique within the template. Use the logical name to reference the resource in other parts of the template. For example, if you want to map an Amazon Elastic Block Store volume to an Amazon EC2 instance, you reference the logical IDs to associate the block stores with the instance. .PARAMETER Category The category of the custom action, such as a build action or a test action. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-codepipeline-customactiontype.html#cfn-codepipeline-customactiontype-category PrimitiveType: String UpdateType: Immutable .PARAMETER ConfigurationProperties The configuration properties for the custom action. You can refer to a name in the configuration properties of the custom action within the URL templates by following the format of {Config:name}, as long as the configuration property is both required and not secret. For more information, see Create a Custom Action for a Pipeline: https://docs.aws.amazon.com/codepipeline/latest/userguide/how-to-create-custom-action.html. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-codepipeline-customactiontype.html#cfn-codepipeline-customactiontype-configurationproperties DuplicatesAllowed: False ItemType: ConfigurationProperties Type: List UpdateType: Immutable .PARAMETER InputArtifactDetails The details of the input artifact for the action, such as its commit ID. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-codepipeline-customactiontype.html#cfn-codepipeline-customactiontype-inputartifactdetails Type: ArtifactDetails UpdateType: Immutable .PARAMETER OutputArtifactDetails The details of the output artifact of the action, such as its commit ID. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-codepipeline-customactiontype.html#cfn-codepipeline-customactiontype-outputartifactdetails Type: ArtifactDetails UpdateType: Immutable .PARAMETER Provider The provider of the service used in the custom action, such as AWS CodeDeploy. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-codepipeline-customactiontype.html#cfn-codepipeline-customactiontype-provider PrimitiveType: String UpdateType: Immutable .PARAMETER Settings URLs that provide users information about this custom action. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-codepipeline-customactiontype.html#cfn-codepipeline-customactiontype-settings Type: Settings UpdateType: Immutable .PARAMETER Tags The tags for the custom action. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-codepipeline-customactiontype.html#cfn-codepipeline-customactiontype-tags DuplicatesAllowed: True ItemType: Tag Type: List UpdateType: Mutable .PARAMETER Version The version identifier of the custom action. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-codepipeline-customactiontype.html#cfn-codepipeline-customactiontype-version PrimitiveType: String UpdateType: Immutable .PARAMETER DeletionPolicy With the DeletionPolicy attribute you can preserve or (in some cases) backup a resource when its stack is deleted. You specify a DeletionPolicy attribute for each resource that you want to control. If a resource has no DeletionPolicy attribute, AWS CloudFormation deletes the resource by default. To keep a resource when its stack is deleted, specify Retain for that resource. You can use retain for any resource. For example, you can retain a nested stack, S3 bucket, or EC2 instance so that you can continue to use or modify those resources after you delete their stacks. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER UpdateReplacePolicy Use the UpdateReplacePolicy attribute to retain or (in some cases) backup the existing physical instance of a resource when it is replaced during a stack update operation. When you initiate a stack update, AWS CloudFormation updates resources based on differences between what you submit and the stack's current template and parameters. If you update a resource property that requires that the resource be replaced, AWS CloudFormation recreates the resource during the update. Recreating the resource generates a new physical ID. AWS CloudFormation creates the replacement resource first, and then changes references from other dependent resources to point to the replacement resource. By default, AWS CloudFormation then deletes the old resource. Using the UpdateReplacePolicy, you can specify that AWS CloudFormation retain or (in some cases) create a snapshot of the old resource. For resources that support snapshots, such as AWS::EC2::Volume, specify Snapshot to have AWS CloudFormation create a snapshot before deleting the old resource instance. You can apply the UpdateReplacePolicy attribute to any resource. UpdateReplacePolicy is only executed if you update a resource property whose update behavior is specified as Replacement, thereby causing AWS CloudFormation to replace the old resource with a new one with a new physical ID. For example, if you update the Engine property of an AWS::RDS::DBInstance resource type, AWS CloudFormation creates a new resource and replaces the current DB instance resource with the new one. The UpdateReplacePolicy attribute would then dictate whether AWS CloudFormation deleted, retained, or created a snapshot of the old DB instance. The update behavior for each property of a resource is specified in the reference topic for that resource in the AWS Resource and Property Types Reference. For more information on resource update behavior, see Update Behaviors of Stack Resources. The UpdateReplacePolicy attribute applies to stack updates you perform directly, as well as stack updates performed using change sets. Note Resources that are retained continue to exist and continue to incur applicable charges until you delete those resources. Snapshots that are created with this policy continue to exist and continue to incur applicable charges until you delete those snapshots. UpdateReplacePolicy retains the old physical resource or snapshot, but removes it from AWS CloudFormation's scope. UpdateReplacePolicy differs from the DeletionPolicy attribute in that it only applies to resources replaced during stack updates. Use DeletionPolicy for resources deleted when a stack is deleted, or when the resource definition itself is deleted from the template as part of a stack update. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER DependsOn With the DependsOn attribute you can specify that the creation of a specific resource follows another. When you add a DependsOn attribute to a resource, that resource is created only after the creation of the resource specified in the DependsOn attribute. This parameter takes a string or list of strings representing Logical IDs of resources that must be created prior to this resource being created. .PARAMETER Metadata The Metadata attribute enables you to associate structured data with a resource. By adding a Metadata attribute to a resource, you can add data in JSON or YAML to the resource declaration. In addition, you can use intrinsic functions (such as GetAtt and Ref), parameters, and pseudo parameters within the Metadata attribute to add those interpreted values. This will be returned when describing the resource using AWS CLI. .PARAMETER UpdatePolicy Use the UpdatePolicy attribute to specify how AWS CloudFormation handles updates to the AWS::AutoScaling::AutoScalingGroup resource. AWS CloudFormation invokes one of three update policies depending on the type of change you make or whether a scheduled action is associated with the Auto Scaling group. You must use the "Add-UpdatePolicy" function or the [UpdatePolicy] class here. .PARAMETER Condition Logical ID of the condition that this resource needs to be true in order for this resource to be provisioned. .FUNCTIONALITY Vaporshell #> [OutputType([CodePipelineCustomActionType])] [cmdletbinding()] Param( [parameter(Mandatory = $true,Position = 0)] [ValidateLogicalId()] [string] $LogicalId, [parameter(Mandatory = $true)] [object] $Category, [parameter(Mandatory = $false)] [object] $ConfigurationProperties, [parameter(Mandatory = $true)] $InputArtifactDetails, [parameter(Mandatory = $true)] $OutputArtifactDetails, [parameter(Mandatory = $true)] [object] $Provider, [parameter(Mandatory = $false)] $Settings, [TransformTag()] [object] [parameter(Mandatory = $false)] $Tags, [parameter(Mandatory = $true)] [object] $Version, [parameter()] [DeletionPolicy] $DeletionPolicy, [parameter()] [UpdateReplacePolicy] $UpdateReplacePolicy, [parameter(Mandatory = $false)] [string[]] $DependsOn, [parameter(Mandatory = $false)] [VSJson] $Metadata, [parameter(Mandatory = $false)] [UpdatePolicy] $UpdatePolicy, [parameter(Mandatory = $false)] [string] $Condition ) Process { $obj = [CodePipelineCustomActionType]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'New-VSCodePipelineCustomActionType' function New-VSCodePipelinePipeline { <# .SYNOPSIS Adds an AWS::CodePipeline::Pipeline resource to the template. The AWS::CodePipeline::Pipeline resource creates a CodePipeline pipeline that describes how software changes go through a release process. For more information, see What Is CodePipeline?: https://docs.aws.amazon.com/codepipeline/latest/userguide/welcome.html in the *AWS CodePipeline User Guide*. .DESCRIPTION Adds an AWS::CodePipeline::Pipeline resource to the template. The AWS::CodePipeline::Pipeline resource creates a CodePipeline pipeline that describes how software changes go through a release process. For more information, see What Is CodePipeline?: https://docs.aws.amazon.com/codepipeline/latest/userguide/welcome.html in the *AWS CodePipeline User Guide*. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-codepipeline-pipeline.html .PARAMETER LogicalId The logical ID must be alphanumeric (A-Za-z0-9) and unique within the template. Use the logical name to reference the resource in other parts of the template. For example, if you want to map an Amazon Elastic Block Store volume to an Amazon EC2 instance, you reference the logical IDs to associate the block stores with the instance. .PARAMETER ArtifactStore The S3 bucket where artifacts for the pipeline are stored. You must include either artifactStore or artifactStores in your pipeline, but you cannot use both. If you create a cross-region action in your pipeline, you must use artifactStores. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-codepipeline-pipeline.html#cfn-codepipeline-pipeline-artifactstore Type: ArtifactStore UpdateType: Mutable .PARAMETER ArtifactStores A mapping of artifactStore objects and their corresponding AWS Regions. There must be an artifact store for the pipeline Region and for each cross-region action in the pipeline. You must include either artifactStore or artifactStores in your pipeline, but you cannot use both. If you create a cross-region action in your pipeline, you must use artifactStores. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-codepipeline-pipeline.html#cfn-codepipeline-pipeline-artifactstores DuplicatesAllowed: False ItemType: ArtifactStoreMap Type: List UpdateType: Mutable .PARAMETER DisableInboundStageTransitions Represents the input of a DisableStageTransition action. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-codepipeline-pipeline.html#cfn-codepipeline-pipeline-disableinboundstagetransitions DuplicatesAllowed: False ItemType: StageTransition Type: List UpdateType: Mutable .PARAMETER Name The name of the pipeline. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-codepipeline-pipeline.html#cfn-codepipeline-pipeline-name PrimitiveType: String UpdateType: Immutable .PARAMETER RestartExecutionOnUpdate Indicates whether to rerun the CodePipeline pipeline after you update it. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-codepipeline-pipeline.html#cfn-codepipeline-pipeline-restartexecutiononupdate PrimitiveType: Boolean UpdateType: Mutable .PARAMETER RoleArn The Amazon Resource Name ARN for AWS CodePipeline to use to either perform actions with no actionRoleArn, or to use to assume roles for actions with an actionRoleArn. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-codepipeline-pipeline.html#cfn-codepipeline-pipeline-rolearn PrimitiveType: String UpdateType: Mutable .PARAMETER Stages Represents information about a stage and its definition. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-codepipeline-pipeline.html#cfn-codepipeline-pipeline-stages DuplicatesAllowed: False ItemType: StageDeclaration Type: List UpdateType: Mutable .PARAMETER Tags Specifies the tags applied to the pipeline. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-codepipeline-pipeline.html#cfn-codepipeline-pipeline-tags DuplicatesAllowed: True ItemType: Tag Type: List UpdateType: Mutable .PARAMETER DeletionPolicy With the DeletionPolicy attribute you can preserve or (in some cases) backup a resource when its stack is deleted. You specify a DeletionPolicy attribute for each resource that you want to control. If a resource has no DeletionPolicy attribute, AWS CloudFormation deletes the resource by default. To keep a resource when its stack is deleted, specify Retain for that resource. You can use retain for any resource. For example, you can retain a nested stack, S3 bucket, or EC2 instance so that you can continue to use or modify those resources after you delete their stacks. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER UpdateReplacePolicy Use the UpdateReplacePolicy attribute to retain or (in some cases) backup the existing physical instance of a resource when it is replaced during a stack update operation. When you initiate a stack update, AWS CloudFormation updates resources based on differences between what you submit and the stack's current template and parameters. If you update a resource property that requires that the resource be replaced, AWS CloudFormation recreates the resource during the update. Recreating the resource generates a new physical ID. AWS CloudFormation creates the replacement resource first, and then changes references from other dependent resources to point to the replacement resource. By default, AWS CloudFormation then deletes the old resource. Using the UpdateReplacePolicy, you can specify that AWS CloudFormation retain or (in some cases) create a snapshot of the old resource. For resources that support snapshots, such as AWS::EC2::Volume, specify Snapshot to have AWS CloudFormation create a snapshot before deleting the old resource instance. You can apply the UpdateReplacePolicy attribute to any resource. UpdateReplacePolicy is only executed if you update a resource property whose update behavior is specified as Replacement, thereby causing AWS CloudFormation to replace the old resource with a new one with a new physical ID. For example, if you update the Engine property of an AWS::RDS::DBInstance resource type, AWS CloudFormation creates a new resource and replaces the current DB instance resource with the new one. The UpdateReplacePolicy attribute would then dictate whether AWS CloudFormation deleted, retained, or created a snapshot of the old DB instance. The update behavior for each property of a resource is specified in the reference topic for that resource in the AWS Resource and Property Types Reference. For more information on resource update behavior, see Update Behaviors of Stack Resources. The UpdateReplacePolicy attribute applies to stack updates you perform directly, as well as stack updates performed using change sets. Note Resources that are retained continue to exist and continue to incur applicable charges until you delete those resources. Snapshots that are created with this policy continue to exist and continue to incur applicable charges until you delete those snapshots. UpdateReplacePolicy retains the old physical resource or snapshot, but removes it from AWS CloudFormation's scope. UpdateReplacePolicy differs from the DeletionPolicy attribute in that it only applies to resources replaced during stack updates. Use DeletionPolicy for resources deleted when a stack is deleted, or when the resource definition itself is deleted from the template as part of a stack update. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER DependsOn With the DependsOn attribute you can specify that the creation of a specific resource follows another. When you add a DependsOn attribute to a resource, that resource is created only after the creation of the resource specified in the DependsOn attribute. This parameter takes a string or list of strings representing Logical IDs of resources that must be created prior to this resource being created. .PARAMETER Metadata The Metadata attribute enables you to associate structured data with a resource. By adding a Metadata attribute to a resource, you can add data in JSON or YAML to the resource declaration. In addition, you can use intrinsic functions (such as GetAtt and Ref), parameters, and pseudo parameters within the Metadata attribute to add those interpreted values. This will be returned when describing the resource using AWS CLI. .PARAMETER UpdatePolicy Use the UpdatePolicy attribute to specify how AWS CloudFormation handles updates to the AWS::AutoScaling::AutoScalingGroup resource. AWS CloudFormation invokes one of three update policies depending on the type of change you make or whether a scheduled action is associated with the Auto Scaling group. You must use the "Add-UpdatePolicy" function or the [UpdatePolicy] class here. .PARAMETER Condition Logical ID of the condition that this resource needs to be true in order for this resource to be provisioned. .FUNCTIONALITY Vaporshell #> [OutputType([CodePipelinePipeline])] [cmdletbinding()] Param( [parameter(Mandatory = $true,Position = 0)] [ValidateLogicalId()] [string] $LogicalId, [parameter(Mandatory = $false)] $ArtifactStore, [parameter(Mandatory = $false)] [object] $ArtifactStores, [parameter(Mandatory = $false)] [object] $DisableInboundStageTransitions, [parameter(Mandatory = $false)] [object] $Name, [parameter(Mandatory = $false)] [object] $RestartExecutionOnUpdate, [parameter(Mandatory = $true)] [object] $RoleArn, [parameter(Mandatory = $true)] [object] $Stages, [TransformTag()] [object] [parameter(Mandatory = $false)] $Tags, [parameter()] [DeletionPolicy] $DeletionPolicy, [parameter()] [UpdateReplacePolicy] $UpdateReplacePolicy, [parameter(Mandatory = $false)] [string[]] $DependsOn, [parameter(Mandatory = $false)] [VSJson] $Metadata, [parameter(Mandatory = $false)] [UpdatePolicy] $UpdatePolicy, [parameter(Mandatory = $false)] [string] $Condition ) Process { $obj = [CodePipelinePipeline]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'New-VSCodePipelinePipeline' function New-VSCodePipelineWebhook { <# .SYNOPSIS Adds an AWS::CodePipeline::Webhook resource to the template. The AWS::CodePipeline::Webhook resource creates and registers your webhook. After the webhook is created and registered, it triggers your pipeline to start every time an external event occurs. For more information, see Configure Your GitHub Pipelines to Use Webhooks for Change Detection: https://docs.aws.amazon.com/codepipeline/latest/userguide/pipelines-webhooks-migration.html in the *AWS CodePipeline User Guide*. .DESCRIPTION Adds an AWS::CodePipeline::Webhook resource to the template. The AWS::CodePipeline::Webhook resource creates and registers your webhook. After the webhook is created and registered, it triggers your pipeline to start every time an external event occurs. For more information, see Configure Your GitHub Pipelines to Use Webhooks for Change Detection: https://docs.aws.amazon.com/codepipeline/latest/userguide/pipelines-webhooks-migration.html in the *AWS CodePipeline User Guide*. We strongly recommend that you use AWS Secrets Manager to store your credentials. If you use Secrets Manager, you must have already configured and stored your secret parameters in Secrets Manager. For more information, see Using Dynamic References to Specify Template Values: https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/dynamic-references.html#dynamic-references-secretsmanager. **Important** When passing secret parameters, do not enter the value directly into the template. The value is rendered as plaintext and is therefore readable. For security reasons, do not use plaintext in your AWS CloudFormation template to store your credentials. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-codepipeline-webhook.html .PARAMETER LogicalId The logical ID must be alphanumeric (A-Za-z0-9) and unique within the template. Use the logical name to reference the resource in other parts of the template. For example, if you want to map an Amazon Elastic Block Store volume to an Amazon EC2 instance, you reference the logical IDs to associate the block stores with the instance. .PARAMETER AuthenticationConfiguration Properties that configure the authentication applied to incoming webhook trigger requests. The required properties depend on the authentication type. For GITHUB_HMAC, only the SecretToken property must be set. For IP, only the AllowedIPRange property must be set to a valid CIDR range. For UNAUTHENTICATED, no properties can be set. Type: WebhookAuthConfiguration Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-codepipeline-webhook.html#cfn-codepipeline-webhook-authenticationconfiguration UpdateType: Mutable .PARAMETER Filters A list of rules applied to the body/payload sent in the POST request to a webhook URL. All defined rules must pass for the request to be accepted and the pipeline started. Type: List Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-codepipeline-webhook.html#cfn-codepipeline-webhook-filters ItemType: WebhookFilterRule UpdateType: Mutable .PARAMETER Authentication Supported options are GITHUB_HMAC, IP, and UNAUTHENTICATED. + For information about the authentication scheme implemented by GITHUB_HMAC, see Securing your webhooks: https://developer.github.com/webhooks/securing/ on the GitHub Developer website. + IP rejects webhooks trigger requests unless they originate from an IP address in the IP range whitelisted in the authentication configuration. + UNAUTHENTICATED accepts all webhook trigger requests regardless of origin. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-codepipeline-webhook.html#cfn-codepipeline-webhook-authentication PrimitiveType: String UpdateType: Mutable .PARAMETER TargetPipeline The name of the pipeline you want to connect to the webhook. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-codepipeline-webhook.html#cfn-codepipeline-webhook-targetpipeline PrimitiveType: String UpdateType: Mutable .PARAMETER TargetAction The name of the action in a pipeline you want to connect to the webhook. The action must be from the source first stage of the pipeline. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-codepipeline-webhook.html#cfn-codepipeline-webhook-targetaction PrimitiveType: String UpdateType: Mutable .PARAMETER Name The name of the webhook. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-codepipeline-webhook.html#cfn-codepipeline-webhook-name PrimitiveType: String UpdateType: Immutable .PARAMETER TargetPipelineVersion The version number of the pipeline to be connected to the trigger request. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-codepipeline-webhook.html#cfn-codepipeline-webhook-targetpipelineversion PrimitiveType: Integer UpdateType: Mutable .PARAMETER RegisterWithThirdParty Configures a connection between the webhook that was created and the external tool with events to be detected. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-codepipeline-webhook.html#cfn-codepipeline-webhook-registerwiththirdparty PrimitiveType: Boolean UpdateType: Mutable .PARAMETER DeletionPolicy With the DeletionPolicy attribute you can preserve or (in some cases) backup a resource when its stack is deleted. You specify a DeletionPolicy attribute for each resource that you want to control. If a resource has no DeletionPolicy attribute, AWS CloudFormation deletes the resource by default. To keep a resource when its stack is deleted, specify Retain for that resource. You can use retain for any resource. For example, you can retain a nested stack, S3 bucket, or EC2 instance so that you can continue to use or modify those resources after you delete their stacks. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER UpdateReplacePolicy Use the UpdateReplacePolicy attribute to retain or (in some cases) backup the existing physical instance of a resource when it is replaced during a stack update operation. When you initiate a stack update, AWS CloudFormation updates resources based on differences between what you submit and the stack's current template and parameters. If you update a resource property that requires that the resource be replaced, AWS CloudFormation recreates the resource during the update. Recreating the resource generates a new physical ID. AWS CloudFormation creates the replacement resource first, and then changes references from other dependent resources to point to the replacement resource. By default, AWS CloudFormation then deletes the old resource. Using the UpdateReplacePolicy, you can specify that AWS CloudFormation retain or (in some cases) create a snapshot of the old resource. For resources that support snapshots, such as AWS::EC2::Volume, specify Snapshot to have AWS CloudFormation create a snapshot before deleting the old resource instance. You can apply the UpdateReplacePolicy attribute to any resource. UpdateReplacePolicy is only executed if you update a resource property whose update behavior is specified as Replacement, thereby causing AWS CloudFormation to replace the old resource with a new one with a new physical ID. For example, if you update the Engine property of an AWS::RDS::DBInstance resource type, AWS CloudFormation creates a new resource and replaces the current DB instance resource with the new one. The UpdateReplacePolicy attribute would then dictate whether AWS CloudFormation deleted, retained, or created a snapshot of the old DB instance. The update behavior for each property of a resource is specified in the reference topic for that resource in the AWS Resource and Property Types Reference. For more information on resource update behavior, see Update Behaviors of Stack Resources. The UpdateReplacePolicy attribute applies to stack updates you perform directly, as well as stack updates performed using change sets. Note Resources that are retained continue to exist and continue to incur applicable charges until you delete those resources. Snapshots that are created with this policy continue to exist and continue to incur applicable charges until you delete those snapshots. UpdateReplacePolicy retains the old physical resource or snapshot, but removes it from AWS CloudFormation's scope. UpdateReplacePolicy differs from the DeletionPolicy attribute in that it only applies to resources replaced during stack updates. Use DeletionPolicy for resources deleted when a stack is deleted, or when the resource definition itself is deleted from the template as part of a stack update. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER DependsOn With the DependsOn attribute you can specify that the creation of a specific resource follows another. When you add a DependsOn attribute to a resource, that resource is created only after the creation of the resource specified in the DependsOn attribute. This parameter takes a string or list of strings representing Logical IDs of resources that must be created prior to this resource being created. .PARAMETER Metadata The Metadata attribute enables you to associate structured data with a resource. By adding a Metadata attribute to a resource, you can add data in JSON or YAML to the resource declaration. In addition, you can use intrinsic functions (such as GetAtt and Ref), parameters, and pseudo parameters within the Metadata attribute to add those interpreted values. This will be returned when describing the resource using AWS CLI. .PARAMETER UpdatePolicy Use the UpdatePolicy attribute to specify how AWS CloudFormation handles updates to the AWS::AutoScaling::AutoScalingGroup resource. AWS CloudFormation invokes one of three update policies depending on the type of change you make or whether a scheduled action is associated with the Auto Scaling group. You must use the "Add-UpdatePolicy" function or the [UpdatePolicy] class here. .PARAMETER Condition Logical ID of the condition that this resource needs to be true in order for this resource to be provisioned. .FUNCTIONALITY Vaporshell #> [OutputType([CodePipelineWebhook])] [cmdletbinding()] Param( [parameter(Mandatory = $true,Position = 0)] [ValidateLogicalId()] [string] $LogicalId, [parameter(Mandatory = $true)] $AuthenticationConfiguration, [parameter(Mandatory = $true)] [object] $Filters, [parameter(Mandatory = $true)] [object] $Authentication, [parameter(Mandatory = $true)] [object] $TargetPipeline, [parameter(Mandatory = $true)] [object] $TargetAction, [parameter(Mandatory = $false)] [object] $Name, [parameter(Mandatory = $true)] [object] $TargetPipelineVersion, [parameter(Mandatory = $false)] [object] $RegisterWithThirdParty, [parameter()] [DeletionPolicy] $DeletionPolicy, [parameter()] [UpdateReplacePolicy] $UpdateReplacePolicy, [parameter(Mandatory = $false)] [string[]] $DependsOn, [parameter(Mandatory = $false)] [VSJson] $Metadata, [parameter(Mandatory = $false)] [UpdatePolicy] $UpdatePolicy, [parameter(Mandatory = $false)] [string] $Condition ) Process { $obj = [CodePipelineWebhook]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'New-VSCodePipelineWebhook' |