netcoreapp2.0/VMware.VimAutomation.Vds.Commands.dll-Help.xml
|
<?xml version="1.0" encoding="utf-8"?>
<helpItems xmlns="http://msh" schema="maml"> <command:command xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10"> <command:details> <command:name>Add-VDSwitchPhysicalNetworkAdapter</command:name> <maml:description> <maml:para>This cmdlet adds host physical network adapters to a vSphere distributed switch.</maml:para> </maml:description> <maml:copyright> <maml:para /> <!--Add copy right info here.--> </maml:copyright> <command:verb>Add</command:verb> <command:noun>VDSwitchPhysicalNetworkAdapter</command:noun> <!--Add Dev version info here.--> <dev:version /> </command:details> <maml:description> <!--This is the Description section--> <maml:para>This cmdlet adds host physical network adapters to a vSphere distributed switch.</maml:para> </maml:description> <command:syntax> <command:syntaxItem> <maml:name>Add-VDSwitchPhysicalNetworkAdapter</maml:name> <command:parameter required = "true" variableLength = "true" globbing = "true" pipelineInput = "false" position = "1" > <maml:name>VMHostPhysicalNic</maml:name> <maml:description> <maml:para>Specifies the host physical network adapters that you want to add or migrate to the vSphere distributed switch.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "true" >PhysicalNic[]</command:parameterValue> </command:parameter> <command:parameter required = "true" variableLength = "false" globbing = "false" pipelineInput = "true (ByValue)" position = "2" > <maml:name>DistributedSwitch</maml:name> <maml:description> <maml:para>Specifies the vSphere distributed switch to which you want to add the host physical network adapter.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "false" >DistributedSwitch</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "true" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>VirtualNicPortgroup</maml:name> <maml:description> <maml:para>Specifies the port groups to which to attach the host virtual network adapters. Accepts either one port group, or the same number of port groups as the number of virtual network adapters specified. If one port group is specified, all adapters are attached to that port group. If the same number of port groups as the number of virtual network adapters are specified, the first adapter is attached to the first port group, the second adapter - to the second port group, and so on.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "true" >VDPortgroup[]</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "true" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>VMHostVirtualNic</maml:name> <maml:description> <maml:para>Specifies the host virtual network adapters to be migrated along with the physical adapter, so that their connectivity is preserved.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "true" >HostVirtualNic[]</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "true" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>Server</maml:name> <maml:description> <maml:para>Specifies the vCenter Server systems on which you want to run the cmdlet. If no value is given to this parameter, the command runs on the default servers. For more information about default servers, see the description of Connect-VIServer.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "true" >VIServer[]</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>WhatIf</maml:name> <maml:description> <maml:para>Indicates that the cmdlet is run only to display the changes that would be made and actually no objects are modified.</maml:para> </maml:description> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>Confirm</maml:name> <maml:description> <maml:para>If the value is $true, indicates that the cmdlet asks for confirmation before running. If the value is $false, the cmdlet runs without asking for user confirmation.</maml:para> </maml:description> </command:parameter> </command:syntaxItem> </command:syntax> <command:parameters> <command:parameter required="true" variableLength="true" globbing="true" pipelineInput="false" position="1"> <maml:name>VMHostPhysicalNic</maml:name> <maml:description> <maml:para>Specifies the host physical network adapters that you want to add or migrate to the vSphere distributed switch.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="true">PhysicalNic[]</command:parameterValue> <dev:type> <maml:name>PhysicalNic[]</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="true" variableLength="false" globbing="false" pipelineInput="true (ByValue)" position="2"> <maml:name>DistributedSwitch</maml:name> <maml:description> <maml:para>Specifies the vSphere distributed switch to which you want to add the host physical network adapter.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">DistributedSwitch</command:parameterValue> <dev:type> <maml:name>DistributedSwitch</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="false" position="named"> <maml:name>VirtualNicPortgroup</maml:name> <maml:description> <maml:para>Specifies the port groups to which to attach the host virtual network adapters. Accepts either one port group, or the same number of port groups as the number of virtual network adapters specified. If one port group is specified, all adapters are attached to that port group. If the same number of port groups as the number of virtual network adapters are specified, the first adapter is attached to the first port group, the second adapter - to the second port group, and so on.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="true">VDPortgroup[]</command:parameterValue> <dev:type> <maml:name>VDPortgroup[]</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="false" position="named"> <maml:name>VMHostVirtualNic</maml:name> <maml:description> <maml:para>Specifies the host virtual network adapters to be migrated along with the physical adapter, so that their connectivity is preserved.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="true">HostVirtualNic[]</command:parameterValue> <dev:type> <maml:name>HostVirtualNic[]</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="false" position="named"> <maml:name>Server</maml:name> <maml:description> <maml:para>Specifies the vCenter Server systems on which you want to run the cmdlet. If no value is given to this parameter, the command runs on the default servers. For more information about default servers, see the description of Connect-VIServer.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="true">VIServer[]</command:parameterValue> <dev:type> <maml:name>VIServer[]</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>WhatIf</maml:name> <maml:description> <maml:para>Indicates that the cmdlet is run only to display the changes that would be made and actually no objects are modified.</maml:para> </maml:description> <dev:type> <maml:name>SwitchParameter</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>Confirm</maml:name> <maml:description> <maml:para>If the value is $true, indicates that the cmdlet asks for confirmation before running. If the value is $false, the cmdlet runs without asking for user confirmation.</maml:para> </maml:description> <dev:type> <maml:name>SwitchParameter</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> </command:parameters> <command:inputTypes> <command:inputType> <dev:type> <maml:name></maml:name> <maml:uri/> <maml:description> <maml:para></maml:para> </maml:description> </dev:type> <maml:description></maml:description> </command:inputType> </command:inputTypes> <command:returnValues> <command:returnValue> <dev:type> <maml:name>None</maml:name> <maml:uri /> <maml:description> <maml:para></maml:para> </maml:description> </dev:type> <maml:description></maml:description> </command:returnValue> </command:returnValues> <command:terminatingErrors> </command:terminatingErrors> <command:nonTerminatingErrors> </command:nonTerminatingErrors> <maml:alertSet> <maml:title></maml:title> <maml:alert> <maml:para></maml:para> </maml:alert> </maml:alertSet> <command:examples> <command:example> <maml:title> -------------- Example 1 -------------- </maml:title> <maml:introduction> <maml:para>C:\PS></maml:para> C:\PS> </maml:introduction> <dev:code>$vmhostNetworkAdapter = Get-VMHost "MyVMHost" | Get-VMHostNetworkAdapter -Physical -Name vmnic2 Get-VDSwitch "MyVDSwitch" | Add-VDSwitchPhysicalNetworkAdapter -VMHostPhysicalNic $vmhostNetworkAdapter</dev:code> <dev:remarks> <maml:para>Retrieves the specified physical network adapter from the specified host and adds it to the specified vSphere distributed switch.</maml:para> <maml:para></maml:para> <maml:para></maml:para> <maml:para> </maml:para> <maml:para></maml:para> </dev:remarks> <command:commandLines> <command:commandLine> <command:commandText> </command:commandText> </command:commandLine> </command:commandLines> </command:example> <command:example> <maml:title> -------------- Example 2 -------------- </maml:title> <maml:introduction> <maml:para>C:\PS></maml:para> C:\PS> </maml:introduction> <dev:code>$myVMHost = Get-VMHost "MyVMHost" $physicalNic = Get-VMHostNetworkAdapter -VMHost $myVMHost -Name "vmnic0" $virtualNic = Get-VMHostNetworkAdapter -VMHost $myVMHost -Name "vmk0" Get-VDSwitch -Name "MyVDSwitch" | Add-VDSwitchPhysicalNetworkAdapter -VMHostPhysicalNic $physicalNic -VMHostVirtualNic $virtualNic -VirtualNicPortgroup 'MyVDPortGroup'</dev:code> <dev:remarks> <maml:para>Migrates a host physical network adapter and a virtual network adapter to a vSphere distributed switch.</maml:para> <maml:para></maml:para> <maml:para></maml:para> <maml:para> </maml:para> <maml:para></maml:para> </dev:remarks> <command:commandLines> <command:commandLine> <command:commandText> </command:commandText> </command:commandLine> </command:commandLines> </command:example> </command:examples> <maml:relatedLinks> <maml:navigationLink> <maml:linkText>Online version:</maml:linkText> <maml:uri>https://code.vmware.com/doc/preview?id=6330#/doc/Add-VDSwitchPhysicalNetworkAdapter.html</maml:uri> </maml:navigationLink> <maml:navigationLink> <maml:linkText>Remove-VDSwitchPhysicalNetworkAdapter</maml:linkText> <maml:uri></maml:uri> </maml:navigationLink> </maml:relatedLinks> </command:command> <command:command xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10"> <command:details> <command:name>Add-VDSwitchVMHost</command:name> <maml:description> <maml:para>This cmdlet adds hosts to the specified vSphere distributed switch.</maml:para> </maml:description> <maml:copyright> <maml:para /> <!--Add copy right info here.--> </maml:copyright> <command:verb>Add</command:verb> <command:noun>VDSwitchVMHost</command:noun> <!--Add Dev version info here.--> <dev:version /> </command:details> <maml:description> <!--This is the Description section--> <maml:para>This cmdlet adds hosts to the specified vSphere distributed switch. The physical network adapters of the hosts are not connected to the vSphere distributed switch.</maml:para> </maml:description> <command:syntax> <command:syntaxItem> <maml:name>Add-VDSwitchVMHost</maml:name> <command:parameter required = "true" variableLength = "false" globbing = "true" pipelineInput = "true (ByValue)" position = "named" > <maml:name>VDSwitch</maml:name> <maml:description> <maml:para>Specifies the vSphere distributed switch to which you want to add one or more hosts.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "false" >VDSwitch</command:parameterValue> </command:parameter> <command:parameter required = "true" variableLength = "true" globbing = "true" pipelineInput = "false" position = "named" > <maml:name>VMHost</maml:name> <maml:description> <maml:para>Specifies the hosts that you want to add to the vSphere distributed switch.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "true" >VMHost[]</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "true" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>Server</maml:name> <maml:description> <maml:para>Specifies the vCenter Server systems on which you want to run the cmdlet. If no value is given to this parameter, the command runs on the default servers. For more information about default servers, see the description of Connect-VIServer.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "true" >VIServer[]</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>RunAsync</maml:name> <maml:description> <maml:para>Indicates that the command returns immediately without waiting for the task to complete. In this mode, the output of the cmdlet is a Task object. For more information about the RunAsync parameter run "help About_RunAsync" in the VMware PowerCLI console.</maml:para> </maml:description> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>WhatIf</maml:name> <maml:description> <maml:para>Indicates that the cmdlet is run only to display the changes that would be made and actually no objects are modified.</maml:para> </maml:description> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>Confirm</maml:name> <maml:description> <maml:para>If the value is $true, indicates that the cmdlet asks for confirmation before running. If the value is $false, the cmdlet runs without asking for user confirmation.</maml:para> </maml:description> </command:parameter> </command:syntaxItem> </command:syntax> <command:parameters> <command:parameter required="true" variableLength="false" globbing="true" pipelineInput="true (ByValue)" position="named"> <maml:name>VDSwitch</maml:name> <maml:description> <maml:para>Specifies the vSphere distributed switch to which you want to add one or more hosts.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">VDSwitch</command:parameterValue> <dev:type> <maml:name>VDSwitch</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="true" variableLength="true" globbing="true" pipelineInput="false" position="named"> <maml:name>VMHost</maml:name> <maml:description> <maml:para>Specifies the hosts that you want to add to the vSphere distributed switch.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="true">VMHost[]</command:parameterValue> <dev:type> <maml:name>VMHost[]</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="false" position="named"> <maml:name>Server</maml:name> <maml:description> <maml:para>Specifies the vCenter Server systems on which you want to run the cmdlet. If no value is given to this parameter, the command runs on the default servers. For more information about default servers, see the description of Connect-VIServer.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="true">VIServer[]</command:parameterValue> <dev:type> <maml:name>VIServer[]</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>RunAsync</maml:name> <maml:description> <maml:para>Indicates that the command returns immediately without waiting for the task to complete. In this mode, the output of the cmdlet is a Task object. For more information about the RunAsync parameter run "help About_RunAsync" in the VMware PowerCLI console.</maml:para> </maml:description> <dev:type> <maml:name>SwitchParameter</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>WhatIf</maml:name> <maml:description> <maml:para>Indicates that the cmdlet is run only to display the changes that would be made and actually no objects are modified.</maml:para> </maml:description> <dev:type> <maml:name>SwitchParameter</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>Confirm</maml:name> <maml:description> <maml:para>If the value is $true, indicates that the cmdlet asks for confirmation before running. If the value is $false, the cmdlet runs without asking for user confirmation.</maml:para> </maml:description> <dev:type> <maml:name>SwitchParameter</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> </command:parameters> <command:inputTypes> <command:inputType> <dev:type> <maml:name></maml:name> <maml:uri/> <maml:description> <maml:para></maml:para> </maml:description> </dev:type> <maml:description></maml:description> </command:inputType> </command:inputTypes> <command:returnValues> <command:returnValue> <dev:type> <maml:name>None</maml:name> <maml:uri /> <maml:description> <maml:para></maml:para> </maml:description> </dev:type> <maml:description></maml:description> </command:returnValue> </command:returnValues> <command:terminatingErrors> </command:terminatingErrors> <command:nonTerminatingErrors> </command:nonTerminatingErrors> <maml:alertSet> <maml:title></maml:title> <maml:alert> <maml:para></maml:para> </maml:alert> </maml:alertSet> <command:examples> <command:example> <maml:title> -------------- Example 1 -------------- </maml:title> <maml:introduction> <maml:para>C:\PS></maml:para> C:\PS> </maml:introduction> <dev:code>Get-VDSwitch -Name "MyDistributedSwitch" | Add-VDSwitchVMHost -VMHost "VMHost1", "VMHost2"</dev:code> <dev:remarks> <maml:para>Adds two hosts to the specified vSphere distributed switch.</maml:para> <maml:para></maml:para> <maml:para></maml:para> <maml:para> </maml:para> <maml:para></maml:para> </dev:remarks> <command:commandLines> <command:commandLine> <command:commandText> </command:commandText> </command:commandLine> </command:commandLines> </command:example> </command:examples> <maml:relatedLinks> <maml:navigationLink> <maml:linkText>Online version:</maml:linkText> <maml:uri>https://code.vmware.com/doc/preview?id=6330#/doc/Add-VDSwitchVMHost.html</maml:uri> </maml:navigationLink> <maml:navigationLink> <maml:linkText>Remove-VDSwitchVMHost</maml:linkText> <maml:uri></maml:uri> </maml:navigationLink> </maml:relatedLinks> </command:command> <command:command xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10"> <command:details> <command:name>Export-VDPortGroup</command:name> <maml:description> <maml:para>This cmdlet exports the configuration of a specified distributed port group to a specified .zip file.</maml:para> </maml:description> <maml:copyright> <maml:para /> <!--Add copy right info here.--> </maml:copyright> <command:verb>Export</command:verb> <command:noun>VDPortGroup</command:noun> <!--Add Dev version info here.--> <dev:version /> </command:details> <maml:description> <!--This is the Description section--> <maml:para>This cmdlet exports the configuration of a specified distributed port group to a specified .zip file. You can export only vSphere distributed port groups. Note: This cmdlet is supported only on vSphere 5.1 or later.</maml:para> </maml:description> <command:syntax> <command:syntaxItem> <maml:name>Export-VDPortGroup</maml:name> <command:parameter required = "true" variableLength = "true" globbing = "false" pipelineInput = "true (ByValue)" position = "1" > <maml:name>VDPortGroup</maml:name> <maml:description> <maml:para>Specifies the distributed port group whose configuration you want to export.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "true" >VDPortgroup[]</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>Description</maml:name> <maml:description> <maml:para>Specifies a description for the exported distributed port group configuration.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "false" >String</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>Destination</maml:name> <maml:description> <maml:para>Specifies an absolute or a relative file path to the location where you want to export the configuration of the distributed port group.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "false" >String</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>Force</maml:name> <maml:description> <maml:para>Indicates that if the specified destination file already exists, the existing file will be overwritten. Any directories required to complete the specified file path will also be created.</maml:para> </maml:description> </command:parameter> <command:parameter required = "false" variableLength = "true" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>Server</maml:name> <maml:description> <maml:para>Specifies the vCenter Server systems on which you want to run the cmdlet. If no value is given to this parameter, the command runs on the default servers. For more information about default servers, see the description of Connect-VIServer.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "true" >VIServer[]</command:parameterValue> </command:parameter> </command:syntaxItem> </command:syntax> <command:parameters> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="true (ByValue)" position="1"> <maml:name>VDPortGroup</maml:name> <maml:description> <maml:para>Specifies the distributed port group whose configuration you want to export.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="true">VDPortgroup[]</command:parameterValue> <dev:type> <maml:name>VDPortgroup[]</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>Description</maml:name> <maml:description> <maml:para>Specifies a description for the exported distributed port group configuration.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">String</command:parameterValue> <dev:type> <maml:name>String</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>Destination</maml:name> <maml:description> <maml:para>Specifies an absolute or a relative file path to the location where you want to export the configuration of the distributed port group.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">String</command:parameterValue> <dev:type> <maml:name>String</maml:name> <maml:uri/> </dev:type> <dev:defaultValue>[file system provider location]\[port group name]-[timestamp].backup.zip</dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>Force</maml:name> <maml:description> <maml:para>Indicates that if the specified destination file already exists, the existing file will be overwritten. Any directories required to complete the specified file path will also be created.</maml:para> </maml:description> <dev:type> <maml:name>SwitchParameter</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="false" position="named"> <maml:name>Server</maml:name> <maml:description> <maml:para>Specifies the vCenter Server systems on which you want to run the cmdlet. If no value is given to this parameter, the command runs on the default servers. For more information about default servers, see the description of Connect-VIServer.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="true">VIServer[]</command:parameterValue> <dev:type> <maml:name>VIServer[]</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> </command:parameters> <command:inputTypes> <command:inputType> <dev:type> <maml:name></maml:name> <maml:uri/> <maml:description> <maml:para></maml:para> </maml:description> </dev:type> <maml:description></maml:description> </command:inputType> </command:inputTypes> <command:returnValues> <command:returnValue> <dev:type> <maml:name>One FileInfo object that contains information about the exported .zip file</maml:name> <maml:uri /> <maml:description> <maml:para></maml:para> </maml:description> </dev:type> <maml:description></maml:description> </command:returnValue> </command:returnValues> <command:terminatingErrors> </command:terminatingErrors> <command:nonTerminatingErrors> </command:nonTerminatingErrors> <maml:alertSet> <maml:title></maml:title> <maml:alert> <maml:para></maml:para> </maml:alert> </maml:alertSet> <command:examples> <command:example> <maml:title> -------------- Example 1 -------------- </maml:title> <maml:introduction> <maml:para>C:\PS></maml:para> C:\PS> </maml:introduction> <dev:code>Get-VDPortGroup -Name 'MyVDPortGroup' | Export-VDPortGroup -Destination 'C:\MyVDSwitchesBackup\MyVDPortGroup_21122012.zip'</dev:code> <dev:remarks> <maml:para>Exports the configuration of the specified port group to the specified file.</maml:para> <maml:para></maml:para> <maml:para></maml:para> <maml:para> </maml:para> <maml:para></maml:para> </dev:remarks> <command:commandLines> <command:commandLine> <command:commandText> </command:commandText> </command:commandLine> </command:commandLines> </command:example> <command:example> <maml:title> -------------- Example 2 -------------- </maml:title> <maml:introduction> <maml:para>C:\PS></maml:para> C:\PS> </maml:introduction> <dev:code>$myPortGroup = Get-VDPortGroup -Name 'MyVDPortGroup' Export-VDPortGroup -VDPortGroup $myPortGroup -Destination 'C:\MyVDSwitchesBackup\MyVDPortGroupBackup.zip' -Force</dev:code> <dev:remarks> <maml:para>Exports the configuration of the specified port group to the specified file. If the MyVDSwitchesBackup directory does not exist, it is created. If the MyVDPortGroupBackup.zip file already exists in the specified location, it is overwritten.</maml:para> <maml:para></maml:para> <maml:para></maml:para> <maml:para> </maml:para> <maml:para></maml:para> </dev:remarks> <command:commandLines> <command:commandLine> <command:commandText> </command:commandText> </command:commandLine> </command:commandLines> </command:example> </command:examples> <maml:relatedLinks> <maml:navigationLink> <maml:linkText>Online version:</maml:linkText> <maml:uri>https://code.vmware.com/doc/preview?id=6330#/doc/Export-VDPortgroup.html</maml:uri> </maml:navigationLink> <maml:navigationLink> <maml:linkText>Get-VDPortgroup</maml:linkText> <maml:uri></maml:uri> </maml:navigationLink> <maml:navigationLink> <maml:linkText>New-VDPortgroup</maml:linkText> <maml:uri></maml:uri> </maml:navigationLink> <maml:navigationLink> <maml:linkText>Remove-VDPortgroup</maml:linkText> <maml:uri></maml:uri> </maml:navigationLink> <maml:navigationLink> <maml:linkText>Set-VDPortgroup</maml:linkText> <maml:uri></maml:uri> </maml:navigationLink> </maml:relatedLinks> </command:command> <command:command xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10"> <command:details> <command:name>Export-VDSwitch</command:name> <maml:description> <maml:para>This cmdlet exports the configuration of a specified vSphere distributed switch to a .zip file.</maml:para> </maml:description> <maml:copyright> <maml:para /> <!--Add copy right info here.--> </maml:copyright> <command:verb>Export</command:verb> <command:noun>VDSwitch</command:noun> <!--Add Dev version info here.--> <dev:version /> </command:details> <maml:description> <!--This is the Description section--> <maml:para>This cmdlet exports the configuration of a specified vSphere distributed switch to a .zip file. Note: This cmdlet is supported only on vCenter Server 5.1 or later.</maml:para> </maml:description> <command:syntax> <command:syntaxItem> <maml:name>Export-VDSwitch</maml:name> <command:parameter required = "true" variableLength = "true" globbing = "false" pipelineInput = "true (ByValue)" position = "1" > <maml:name>VDSwitch</maml:name> <maml:description> <maml:para>Specifies the vSphere distributed switch whose configuration you want to export.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "true" >VDSwitch[]</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>WithoutPortGroups</maml:name> <maml:description> <maml:para>Indicates that the configuration of the vSphere distributed switch is exported without its port group configuration.</maml:para> </maml:description> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>Description</maml:name> <maml:description> <maml:para>Specifies a description for the exported vSphere distributed switch configuration.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "false" >String</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>Destination</maml:name> <maml:description> <maml:para>Specifies an absolute or a relative file path to the location where you want to export the vSphere distributed switch configuration.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "false" >String</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>Force</maml:name> <maml:description> <maml:para>Indicates that if the specified destination file already exists, the existing file is overwritten. Any directories required to complete the specified file path are also created.</maml:para> </maml:description> </command:parameter> <command:parameter required = "false" variableLength = "true" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>Server</maml:name> <maml:description> <maml:para>Specifies the vCenter Server systems on which you want to run the cmdlet. If no value is given to this parameter, the command runs on the default servers. For more information about default servers, see the description of Connect-VIServer.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "true" >VIServer[]</command:parameterValue> </command:parameter> </command:syntaxItem> </command:syntax> <command:parameters> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="true (ByValue)" position="1"> <maml:name>VDSwitch</maml:name> <maml:description> <maml:para>Specifies the vSphere distributed switch whose configuration you want to export.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="true">VDSwitch[]</command:parameterValue> <dev:type> <maml:name>VDSwitch[]</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>WithoutPortGroups</maml:name> <maml:description> <maml:para>Indicates that the configuration of the vSphere distributed switch is exported without its port group configuration.</maml:para> </maml:description> <dev:type> <maml:name>SwitchParameter</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>Description</maml:name> <maml:description> <maml:para>Specifies a description for the exported vSphere distributed switch configuration.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">String</command:parameterValue> <dev:type> <maml:name>String</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>Destination</maml:name> <maml:description> <maml:para>Specifies an absolute or a relative file path to the location where you want to export the vSphere distributed switch configuration.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">String</command:parameterValue> <dev:type> <maml:name>String</maml:name> <maml:uri/> </dev:type> <dev:defaultValue>[file system provider location]\[port group name]-[timestamp].backup.zip</dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>Force</maml:name> <maml:description> <maml:para>Indicates that if the specified destination file already exists, the existing file is overwritten. Any directories required to complete the specified file path are also created.</maml:para> </maml:description> <dev:type> <maml:name>SwitchParameter</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="false" position="named"> <maml:name>Server</maml:name> <maml:description> <maml:para>Specifies the vCenter Server systems on which you want to run the cmdlet. If no value is given to this parameter, the command runs on the default servers. For more information about default servers, see the description of Connect-VIServer.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="true">VIServer[]</command:parameterValue> <dev:type> <maml:name>VIServer[]</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> </command:parameters> <command:inputTypes> <command:inputType> <dev:type> <maml:name></maml:name> <maml:uri/> <maml:description> <maml:para></maml:para> </maml:description> </dev:type> <maml:description></maml:description> </command:inputType> </command:inputTypes> <command:returnValues> <command:returnValue> <dev:type> <maml:name>One FileInfo object that contains information about the exported .zip file</maml:name> <maml:uri /> <maml:description> <maml:para></maml:para> </maml:description> </dev:type> <maml:description></maml:description> </command:returnValue> </command:returnValues> <command:terminatingErrors> </command:terminatingErrors> <command:nonTerminatingErrors> </command:nonTerminatingErrors> <maml:alertSet> <maml:title></maml:title> <maml:alert> <maml:para></maml:para> </maml:alert> </maml:alertSet> <command:examples> <command:example> <maml:title> -------------- Example 1 -------------- </maml:title> <maml:introduction> <maml:para>C:\PS></maml:para> C:\PS> </maml:introduction> <dev:code>Get-VDSwitch -Name 'MyVDSwitch' | Export-VDSwitch -Description "My VDSwitch configuration" -Destination "c:\myVDSwitchConfig.zip"</dev:code> <dev:remarks> <maml:para>Exports the configuration of the specified vSphere distributed switch and its port groups to the specified file.</maml:para> <maml:para></maml:para> <maml:para></maml:para> <maml:para> </maml:para> <maml:para></maml:para> </dev:remarks> <command:commandLines> <command:commandLine> <command:commandText> </command:commandText> </command:commandLine> </command:commandLines> </command:example> <command:example> <maml:title> -------------- Example 2 -------------- </maml:title> <maml:introduction> <maml:para>C:\PS></maml:para> C:\PS> </maml:introduction> <dev:code>Get-VDSwitch -Name 'MyVDSwitch' | Export-VDSwitch -Description "My VDSwitch configuration" -Destination "c:\myVDSwitchConfig.zip" -WithoutPortGroups -Force</dev:code> <dev:remarks> <maml:para>Exports the configuration of the specified vSphere distributed switch and its port groups to the specified file. If the myVDSwitchConfig.zip file already exists, it is overwritten.</maml:para> <maml:para></maml:para> <maml:para></maml:para> <maml:para> </maml:para> <maml:para></maml:para> </dev:remarks> <command:commandLines> <command:commandLine> <command:commandText> </command:commandText> </command:commandLine> </command:commandLines> </command:example> </command:examples> <maml:relatedLinks> <maml:navigationLink> <maml:linkText>Online version:</maml:linkText> <maml:uri>https://code.vmware.com/doc/preview?id=6330#/doc/Export-VDSwitch.html</maml:uri> </maml:navigationLink> <maml:navigationLink> <maml:linkText>Get-VDSwitch</maml:linkText> <maml:uri></maml:uri> </maml:navigationLink> <maml:navigationLink> <maml:linkText>New-VDSwitch</maml:linkText> <maml:uri></maml:uri> </maml:navigationLink> <maml:navigationLink> <maml:linkText>Remove-VDSwitch</maml:linkText> <maml:uri></maml:uri> </maml:navigationLink> <maml:navigationLink> <maml:linkText>Set-VDSwitch</maml:linkText> <maml:uri></maml:uri> </maml:navigationLink> </maml:relatedLinks> </command:command> <command:command xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10"> <command:details> <command:name>Get-VDBlockedPolicy</command:name> <maml:description> <maml:para>This cmdlet retrieves the blocking policy for distributed ports.</maml:para> </maml:description> <maml:copyright> <maml:para /> <!--Add copy right info here.--> </maml:copyright> <command:verb>Get</command:verb> <command:noun>VDBlockedPolicy</command:noun> <!--Add Dev version info here.--> <dev:version /> </command:details> <maml:description> <!--This is the Description section--> <maml:para>This cmdlet retrieves the blocking policy for distributed ports. For distributed port group and vSphere distributed switch parameter sets, the default port policy at the distributed port group or switch level is retrieved.</maml:para> </maml:description> <command:syntax> <command:syntaxItem> <maml:name>Get-VDBlockedPolicy</maml:name> <command:parameter required = "true" variableLength = "true" globbing = "false" pipelineInput = "true (ByValue)" position = "named" > <maml:name>VDPortgroup</maml:name> <maml:description> <maml:para>Specifies a distributed port group for which you want to retrieve the default blocking policy.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "true" >VDPortgroup[]</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "true" globbing = "true" pipelineInput = "false" position = "named" > <maml:name>Server</maml:name> <maml:description> <maml:para>Specifies the vCenter Server systems on which you want to run the cmdlet. If no value is given to this parameter, the command runs on the default servers. For more information about default servers, see the description of Connect-VIServer.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "true" >VIServer[]</command:parameterValue> </command:parameter> </command:syntaxItem> <command:syntaxItem> <maml:name>Get-VDBlockedPolicy</maml:name> <command:parameter required = "true" variableLength = "true" globbing = "false" pipelineInput = "true (ByValue)" position = "named" > <maml:name>VDSwitch</maml:name> <maml:description> <maml:para>Specifies a vSphere distributed switch for which you want to retrieve the default blocking policy.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "true" >VDSwitch[]</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "true" globbing = "true" pipelineInput = "false" position = "named" > <maml:name>Server</maml:name> <maml:description> <maml:para>Specifies the vCenter Server systems on which you want to run the cmdlet. If no value is given to this parameter, the command runs on the default servers. For more information about default servers, see the description of Connect-VIServer.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "true" >VIServer[]</command:parameterValue> </command:parameter> </command:syntaxItem> <command:syntaxItem> <maml:name>Get-VDBlockedPolicy</maml:name> <command:parameter required = "true" variableLength = "true" globbing = "false" pipelineInput = "true (ByValue)" position = "named" > <maml:name>VDPort</maml:name> <maml:description> <maml:para>Specifies the distributed ports for which you want to retrieve the blocking policy.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "true" >VDPort[]</command:parameterValue> </command:parameter> </command:syntaxItem> </command:syntax> <command:parameters> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="true (ByValue)" position="named"> <maml:name>VDPortgroup</maml:name> <maml:description> <maml:para>Specifies a distributed port group for which you want to retrieve the default blocking policy.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="true">VDPortgroup[]</command:parameterValue> <dev:type> <maml:name>VDPortgroup[]</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="true" pipelineInput="false" position="named"> <maml:name>Server</maml:name> <maml:description> <maml:para>Specifies the vCenter Server systems on which you want to run the cmdlet. If no value is given to this parameter, the command runs on the default servers. For more information about default servers, see the description of Connect-VIServer.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="true">VIServer[]</command:parameterValue> <dev:type> <maml:name>VIServer[]</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="true (ByValue)" position="named"> <maml:name>VDSwitch</maml:name> <maml:description> <maml:para>Specifies a vSphere distributed switch for which you want to retrieve the default blocking policy.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="true">VDSwitch[]</command:parameterValue> <dev:type> <maml:name>VDSwitch[]</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="true (ByValue)" position="named"> <maml:name>VDPort</maml:name> <maml:description> <maml:para>Specifies the distributed ports for which you want to retrieve the blocking policy.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="true">VDPort[]</command:parameterValue> <dev:type> <maml:name>VDPort[]</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> </command:parameters> <command:inputTypes> <command:inputType> <dev:type> <maml:name></maml:name> <maml:uri/> <maml:description> <maml:para></maml:para> </maml:description> </dev:type> <maml:description></maml:description> </command:inputType> </command:inputTypes> <command:returnValues> <command:returnValue> <dev:type> <maml:name>One or more BlockedPolicy objects</maml:name> <maml:uri /> <maml:description> <maml:para></maml:para> </maml:description> </dev:type> <maml:description></maml:description> </command:returnValue> </command:returnValues> <command:terminatingErrors> </command:terminatingErrors> <command:nonTerminatingErrors> </command:nonTerminatingErrors> <maml:alertSet> <maml:title></maml:title> <maml:alert> <maml:para></maml:para> </maml:alert> </maml:alertSet> <command:examples> <command:example> <maml:title> -------------- Example 1 -------------- </maml:title> <maml:introduction> <maml:para>C:\PS></maml:para> C:\PS> </maml:introduction> <dev:code>Get-VDSwitch "MyVDSwitch" | Get-VDBlockedPolicy</dev:code> <dev:remarks> <maml:para>Retrieves the blocking policy of a vSphere distributed switch named "MyVDSwitch".</maml:para> <maml:para></maml:para> <maml:para></maml:para> <maml:para> </maml:para> <maml:para></maml:para> </dev:remarks> <command:commandLines> <command:commandLine> <command:commandText> </command:commandText> </command:commandLine> </command:commandLines> </command:example> <command:example> <maml:title> -------------- Example 2 -------------- </maml:title> <maml:introduction> <maml:para>C:\PS></maml:para> C:\PS> </maml:introduction> <dev:code>Get-VDPortgroup "MyVDPortgroup" | Get-VDPort | Get-VDBlockedPolicy</dev:code> <dev:remarks> <maml:para>Retrieves the blocking policies of all ports inside a distributed port group named "MyVDPortgroup".</maml:para> <maml:para></maml:para> <maml:para></maml:para> <maml:para> </maml:para> <maml:para></maml:para> </dev:remarks> <command:commandLines> <command:commandLine> <command:commandText> </command:commandText> </command:commandLine> </command:commandLines> </command:example> </command:examples> <maml:relatedLinks> <maml:navigationLink> <maml:linkText>Online version:</maml:linkText> <maml:uri>https://code.vmware.com/doc/preview?id=6330#/doc/Get-VDBlockedPolicy.html</maml:uri> </maml:navigationLink> <maml:navigationLink> <maml:linkText>Set-VDBlockedPolicy</maml:linkText> <maml:uri></maml:uri> </maml:navigationLink> </maml:relatedLinks> </command:command> <command:command xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10"> <command:details> <command:name>Get-VDPort</command:name> <maml:description> <maml:para>This cmdlet retrieves virtual distributed ports.</maml:para> </maml:description> <maml:copyright> <maml:para /> <!--Add copy right info here.--> </maml:copyright> <command:verb>Get</command:verb> <command:noun>VDPort</command:noun> <!--Add Dev version info here.--> <dev:version /> </command:details> <maml:description> <!--This is the Description section--> <maml:para>This cmdlet retrieves virtual distributed ports. At least one of the VDSwitch or VDPortgroup parameters must be specified.</maml:para> </maml:description> <command:syntax> <command:syntaxItem> <maml:name>Get-VDPort</maml:name> <command:parameter required = "false" variableLength = "true" globbing = "false" pipelineInput = "true (ByValue)" position = "named" > <maml:name>VDPortgroup</maml:name> <maml:description> <maml:para>Specifies the distributed virtual port group whose ports you want to retrieve.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "true" >VDPortgroup[]</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "true" globbing = "false" pipelineInput = "true (ByValue)" position = "named" > <maml:name>VDSwitch</maml:name> <maml:description> <maml:para>Specifies the vSphere distributed switch whose ports you want to retrieve.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "true" >VDSwitch[]</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "true" globbing = "false" pipelineInput = "false" position = "1" > <maml:name>Key</maml:name> <maml:description> <maml:para>Specifies the key of the port which you want to retrieve.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "true" >String[]</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>ActiveOnly</maml:name> <maml:description> <maml:para>If set, only the active ports are returned.</maml:para> </maml:description> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>ConnectedOnly</maml:name> <maml:description> <maml:para>If set, only the connected ports are returned.</maml:para> </maml:description> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>Uplink</maml:name> <maml:description> <maml:para>If set, only uplink ports are returned. If not set, both uplink and non-uplink ports are returned. This parameter, like every SwitchParameter, can also be set to false (-Uplink:$false), in which case only non-uplink ports are returned.</maml:para> </maml:description> </command:parameter> <command:parameter required = "false" variableLength = "true" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>Server</maml:name> <maml:description> <maml:para>Specifies the vCenter Server systems on which you want to run the cmdlet. If no value is given to this parameter, the command runs on the default servers. For more information about default servers, see the description of Connect-VIServer.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "true" >VIServer[]</command:parameterValue> </command:parameter> </command:syntaxItem> </command:syntax> <command:parameters> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="true (ByValue)" position="named"> <maml:name>VDPortgroup</maml:name> <maml:description> <maml:para>Specifies the distributed virtual port group whose ports you want to retrieve.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="true">VDPortgroup[]</command:parameterValue> <dev:type> <maml:name>VDPortgroup[]</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="true (ByValue)" position="named"> <maml:name>VDSwitch</maml:name> <maml:description> <maml:para>Specifies the vSphere distributed switch whose ports you want to retrieve.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="true">VDSwitch[]</command:parameterValue> <dev:type> <maml:name>VDSwitch[]</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="false" position="1"> <maml:name>Key</maml:name> <maml:description> <maml:para>Specifies the key of the port which you want to retrieve.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="true">String[]</command:parameterValue> <dev:type> <maml:name>String[]</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>ActiveOnly</maml:name> <maml:description> <maml:para>If set, only the active ports are returned.</maml:para> </maml:description> <dev:type> <maml:name>SwitchParameter</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>ConnectedOnly</maml:name> <maml:description> <maml:para>If set, only the connected ports are returned.</maml:para> </maml:description> <dev:type> <maml:name>SwitchParameter</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>Uplink</maml:name> <maml:description> <maml:para>If set, only uplink ports are returned. If not set, both uplink and non-uplink ports are returned. This parameter, like every SwitchParameter, can also be set to false (-Uplink:$false), in which case only non-uplink ports are returned.</maml:para> </maml:description> <dev:type> <maml:name>SwitchParameter</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="false" position="named"> <maml:name>Server</maml:name> <maml:description> <maml:para>Specifies the vCenter Server systems on which you want to run the cmdlet. If no value is given to this parameter, the command runs on the default servers. For more information about default servers, see the description of Connect-VIServer.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="true">VIServer[]</command:parameterValue> <dev:type> <maml:name>VIServer[]</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> </command:parameters> <command:inputTypes> <command:inputType> <dev:type> <maml:name></maml:name> <maml:uri/> <maml:description> <maml:para></maml:para> </maml:description> </dev:type> <maml:description></maml:description> </command:inputType> </command:inputTypes> <command:returnValues> <command:returnValue> <dev:type> <maml:name>Zero or more VDPort objects</maml:name> <maml:uri /> <maml:description> <maml:para></maml:para> </maml:description> </dev:type> <maml:description></maml:description> </command:returnValue> </command:returnValues> <command:terminatingErrors> </command:terminatingErrors> <command:nonTerminatingErrors> </command:nonTerminatingErrors> <maml:alertSet> <maml:title></maml:title> <maml:alert> <maml:para>Requires vSphere API 4.0 or later.</maml:para> </maml:alert> </maml:alertSet> <command:examples> <command:example> <maml:title> -------------- Example 1 -------------- </maml:title> <maml:introduction> <maml:para>C:\PS></maml:para> C:\PS> </maml:introduction> <dev:code>Get-VDPortGroup "MyVDPortgroup" | Get-VDPort -Key "MyPortgroupKey"</dev:code> <dev:remarks> <maml:para>Retrieves a virtual distributed port assigned with a key named "MyPortgroupKey" from a virtual distributed port group named "MyVDPortgroup".</maml:para> <maml:para></maml:para> <maml:para></maml:para> <maml:para> </maml:para> <maml:para></maml:para> </dev:remarks> <command:commandLines> <command:commandLine> <command:commandText> </command:commandText> </command:commandLine> </command:commandLines> </command:example> <command:example> <maml:title> -------------- Example 2 -------------- </maml:title> <maml:introduction> <maml:para>C:\PS></maml:para> C:\PS> </maml:introduction> <dev:code>Get-VDSwitch "MyVDSwitch" | Get-VDPort -Uplink</dev:code> <dev:remarks> <maml:para>Retrieves all uplink virtual distributed ports of a vSphere distributed switch named "MyVDSwitch".</maml:para> <maml:para></maml:para> <maml:para></maml:para> <maml:para> </maml:para> <maml:para></maml:para> </dev:remarks> <command:commandLines> <command:commandLine> <command:commandText> </command:commandText> </command:commandLine> </command:commandLines> </command:example> <command:example> <maml:title> -------------- Example 3 -------------- </maml:title> <maml:introduction> <maml:para>C:\PS></maml:para> C:\PS> </maml:introduction> <dev:code>Get-VDSwitch "MyVDSwitch" | Get-VDPort -ConnectedOnly</dev:code> <dev:remarks> <maml:para>Retrieves all connected virtual distributed ports of a vSphere distributed switch named "MyVDSwitch".</maml:para> <maml:para></maml:para> <maml:para></maml:para> <maml:para> </maml:para> <maml:para></maml:para> </dev:remarks> <command:commandLines> <command:commandLine> <command:commandText> </command:commandText> </command:commandLine> </command:commandLines> </command:example> </command:examples> <maml:relatedLinks> <maml:navigationLink> <maml:linkText>Online version:</maml:linkText> <maml:uri>https://code.vmware.com/doc/preview?id=6330#/doc/Get-VDPort.html</maml:uri> </maml:navigationLink> <maml:navigationLink> <maml:linkText>Set-VDPort</maml:linkText> <maml:uri></maml:uri> </maml:navigationLink> </maml:relatedLinks> </command:command> <command:command xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10"> <command:details> <command:name>Get-VDPortgroup</command:name> <maml:description> <maml:para>This cmdlet retrieves distributed port groups.</maml:para> </maml:description> <maml:copyright> <maml:para /> <!--Add copy right info here.--> </maml:copyright> <command:verb>Get</command:verb> <command:noun>VDPortgroup</command:noun> <!--Add Dev version info here.--> <dev:version /> </command:details> <maml:description> <!--This is the Description section--> <maml:para>This cmdlet retrieves distributed port groups.</maml:para> </maml:description> <command:syntax> <command:syntaxItem> <maml:name>Get-VDPortgroup</maml:name> <command:parameter required = "false" variableLength = "true" globbing = "true" pipelineInput = "false" position = "1" > <maml:name>Name</maml:name> <maml:description> <maml:para>Specifies the names of the distributed port groups that you want to retrieve.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "true" >String[]</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "true" globbing = "false" pipelineInput = "true (ByValue)" position = "named" > <maml:name>NetworkAdapter</maml:name> <maml:description> <maml:para>Specifies a virtual machine network adapter to retrieve the distributed port group to which the network adapter is connected.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "true" >NetworkAdapter[]</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "true" globbing = "true" pipelineInput = "true (ByValue)" position = "named" > <maml:name>VDSwitch</maml:name> <maml:description> <maml:para>Specifies a vSphere distributed switch to retrieve the distributed port groups that belong to the switch.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "true" >VDSwitch[]</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "true" globbing = "false" pipelineInput = "true (ByValue)" position = "named" > <maml:name>VMHostNetworkAdapter</maml:name> <maml:description> <maml:para>Specifies a host virtual network adapter to retrieve the distributed port groups to which the network adapter is connected.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "true" >HostVirtualNic[]</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "true" globbing = "true" pipelineInput = "false" position = "named" > <maml:name>Server</maml:name> <maml:description> <maml:para>Specifies the vCenter Server systems on which you want to run the cmdlet. If no value is given to this parameter, the command runs on the default servers. For more information about default servers, see the description of Connect-VIServer.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "true" >VIServer[]</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "true" globbing = "true" pipelineInput = "false" position = "named" > <maml:name>Tag</maml:name> <maml:description> <maml:para>Returns only the distributed port groups that are associated with any of the specified tags.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "true" >Tag[]</command:parameterValue> </command:parameter> </command:syntaxItem> <command:syntaxItem> <maml:name>Get-VDPortgroup</maml:name> <command:parameter required = "true" variableLength = "true" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>Id</maml:name> <maml:description> <maml:para>Specifies the IDs of the distributed port groups that you want to retrieve. Note: When a list of values is specified for the Id parameter, the returned objects would have an ID that matches exactly one of the string values in that list.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "true" >String[]</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "true" globbing = "true" pipelineInput = "false" position = "named" > <maml:name>Server</maml:name> <maml:description> <maml:para>Specifies the vCenter Server systems on which you want to run the cmdlet. If no value is given to this parameter, the command runs on the default servers. For more information about default servers, see the description of Connect-VIServer.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "true" >VIServer[]</command:parameterValue> </command:parameter> </command:syntaxItem> <command:syntaxItem> <maml:name>Get-VDPortgroup</maml:name> <command:parameter required = "true" variableLength = "true" globbing = "false" pipelineInput = "true (ByValue)" position = "named" > <maml:name>RelatedObject</maml:name> <maml:description> <maml:para>Specifies an object to retrieve one or more distributed port groups that are related to the object. This parameter accepts ExternalNetwork, OrgNetwork, NetworkPool, and OMResource objects.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "true" >VDPortgroupRelatedObjectBase[]</command:parameterValue> </command:parameter> </command:syntaxItem> </command:syntax> <command:parameters> <command:parameter required="false" variableLength="true" globbing="true" pipelineInput="false" position="1"> <maml:name>Name</maml:name> <maml:description> <maml:para>Specifies the names of the distributed port groups that you want to retrieve.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="true">String[]</command:parameterValue> <dev:type> <maml:name>String[]</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="true (ByValue)" position="named"> <maml:name>NetworkAdapter</maml:name> <maml:description> <maml:para>Specifies a virtual machine network adapter to retrieve the distributed port group to which the network adapter is connected.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="true">NetworkAdapter[]</command:parameterValue> <dev:type> <maml:name>NetworkAdapter[]</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="true" pipelineInput="true (ByValue)" position="named"> <maml:name>VDSwitch</maml:name> <maml:description> <maml:para>Specifies a vSphere distributed switch to retrieve the distributed port groups that belong to the switch.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="true">VDSwitch[]</command:parameterValue> <dev:type> <maml:name>VDSwitch[]</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="true (ByValue)" position="named"> <maml:name>VMHostNetworkAdapter</maml:name> <maml:description> <maml:para>Specifies a host virtual network adapter to retrieve the distributed port groups to which the network adapter is connected.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="true">HostVirtualNic[]</command:parameterValue> <dev:type> <maml:name>HostVirtualNic[]</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="true" pipelineInput="false" position="named"> <maml:name>Server</maml:name> <maml:description> <maml:para>Specifies the vCenter Server systems on which you want to run the cmdlet. If no value is given to this parameter, the command runs on the default servers. For more information about default servers, see the description of Connect-VIServer.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="true">VIServer[]</command:parameterValue> <dev:type> <maml:name>VIServer[]</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="true" pipelineInput="false" position="named"> <maml:name>Tag</maml:name> <maml:description> <maml:para>Returns only the distributed port groups that are associated with any of the specified tags.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="true">Tag[]</command:parameterValue> <dev:type> <maml:name>Tag[]</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="false" position="named"> <maml:name>Id</maml:name> <maml:description> <maml:para>Specifies the IDs of the distributed port groups that you want to retrieve. Note: When a list of values is specified for the Id parameter, the returned objects would have an ID that matches exactly one of the string values in that list.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="true">String[]</command:parameterValue> <dev:type> <maml:name>String[]</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="true (ByValue)" position="named"> <maml:name>RelatedObject</maml:name> <maml:description> <maml:para>Specifies an object to retrieve one or more distributed port groups that are related to the object. This parameter accepts ExternalNetwork, OrgNetwork, NetworkPool, and OMResource objects.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="true">VDPortgroupRelatedObjectBase[]</command:parameterValue> <dev:type> <maml:name>VDPortgroupRelatedObjectBase[]</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> </command:parameters> <command:inputTypes> <command:inputType> <dev:type> <maml:name></maml:name> <maml:uri/> <maml:description> <maml:para></maml:para> </maml:description> </dev:type> <maml:description></maml:description> </command:inputType> </command:inputTypes> <command:returnValues> <command:returnValue> <dev:type> <maml:name>Zero or more VDPortgroup objects</maml:name> <maml:uri /> <maml:description> <maml:para></maml:para> </maml:description> </dev:type> <maml:description></maml:description> </command:returnValue> </command:returnValues> <command:terminatingErrors> </command:terminatingErrors> <command:nonTerminatingErrors> </command:nonTerminatingErrors> <maml:alertSet> <maml:title></maml:title> <maml:alert> <maml:para></maml:para> </maml:alert> </maml:alertSet> <command:examples> <command:example> <maml:title> -------------- Example 1 -------------- </maml:title> <maml:introduction> <maml:para>C:\PS></maml:para> C:\PS> </maml:introduction> <dev:code>Get-VDPortGroup -Name "MyVDPortGroup" -VDSwitch "MyVDSwitch"</dev:code> <dev:remarks> <maml:para>Retrieves the distributed port group named "MyVDPortGroup" on the specified vSphere distributed switch.</maml:para> <maml:para></maml:para> <maml:para></maml:para> <maml:para> </maml:para> <maml:para></maml:para> </dev:remarks> <command:commandLines> <command:commandLine> <command:commandText> </command:commandText> </command:commandLine> </command:commandLines> </command:example> <command:example> <maml:title> -------------- Example 2 -------------- </maml:title> <maml:introduction> <maml:para>C:\PS></maml:para> C:\PS> </maml:introduction> <dev:code>Get-OrgNetwork -Name "MyOrgNetwork" | Get-VDPortGroup</dev:code> <dev:remarks> <maml:para>Retrieves the distributed port groups that are related to the specified organization network in the cloud.</maml:para> <maml:para></maml:para> <maml:para></maml:para> <maml:para> </maml:para> <maml:para></maml:para> </dev:remarks> <command:commandLines> <command:commandLine> <command:commandText> </command:commandText> </command:commandLine> </command:commandLines> </command:example> <command:example> <maml:title> -------------- Example 3 -------------- </maml:title> <maml:introduction> <maml:para>C:\PS></maml:para> C:\PS> </maml:introduction> <dev:code>Get-NetworkAdapter -Name "MyVMNetworkAdapter" | Get-VDPortGroup</dev:code> <dev:remarks> <maml:para>Retrieves the distributed port group to which the specified virtual machine network adapter is connected.</maml:para> <maml:para></maml:para> <maml:para></maml:para> <maml:para> </maml:para> <maml:para></maml:para> </dev:remarks> <command:commandLines> <command:commandLine> <command:commandText> </command:commandText> </command:commandLine> </command:commandLines> </command:example> </command:examples> <maml:relatedLinks> <maml:navigationLink> <maml:linkText>Online version:</maml:linkText> <maml:uri>https://code.vmware.com/doc/preview?id=6330#/doc/Get-VDportgroup.html</maml:uri> </maml:navigationLink> <maml:navigationLink> <maml:linkText>New-VDPortgroup</maml:linkText> <maml:uri></maml:uri> </maml:navigationLink> <maml:navigationLink> <maml:linkText>Remove-VDPortgroup</maml:linkText> <maml:uri></maml:uri> </maml:navigationLink> <maml:navigationLink> <maml:linkText>Set-VDPortgroup</maml:linkText> <maml:uri></maml:uri> </maml:navigationLink> <maml:navigationLink> <maml:linkText>Export-VDPortgroup</maml:linkText> <maml:uri></maml:uri> </maml:navigationLink> </maml:relatedLinks> </command:command> <command:command xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10"> <command:details> <command:name>Get-VDPortgroupOverridePolicy</command:name> <maml:description> <maml:para>This cmdlet retrieves the policy for overriding port group settings at port level.</maml:para> </maml:description> <maml:copyright> <maml:para /> <!--Add copy right info here.--> </maml:copyright> <command:verb>Get</command:verb> <command:noun>VDPortgroupOverridePolicy</command:noun> <!--Add Dev version info here.--> <dev:version /> </command:details> <maml:description> <!--This is the Description section--> <maml:para>This cmdlet retrieves the policy for overriding port group settings at port level.</maml:para> </maml:description> <command:syntax> <command:syntaxItem> <maml:name>Get-VDPortgroupOverridePolicy</maml:name> <command:parameter required = "true" variableLength = "true" globbing = "false" pipelineInput = "true (ByValue)" position = "1" > <maml:name>VDPortgroup</maml:name> <maml:description> <maml:para>Specifies a distributed port group for which you want to retrieve the default port group overriding policy.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "true" >VDPortgroup[]</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "true" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>Server</maml:name> <maml:description> <maml:para>Specifies the vCenter Server systems on which you want to run the cmdlet. If no value is given to this parameter, the command runs on the default servers. For more information about default servers, see the description of Connect-VIServer.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "true" >VIServer[]</command:parameterValue> </command:parameter> </command:syntaxItem> </command:syntax> <command:parameters> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="true (ByValue)" position="1"> <maml:name>VDPortgroup</maml:name> <maml:description> <maml:para>Specifies a distributed port group for which you want to retrieve the default port group overriding policy.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="true">VDPortgroup[]</command:parameterValue> <dev:type> <maml:name>VDPortgroup[]</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="false" position="named"> <maml:name>Server</maml:name> <maml:description> <maml:para>Specifies the vCenter Server systems on which you want to run the cmdlet. If no value is given to this parameter, the command runs on the default servers. For more information about default servers, see the description of Connect-VIServer.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="true">VIServer[]</command:parameterValue> <dev:type> <maml:name>VIServer[]</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> </command:parameters> <command:inputTypes> <command:inputType> <dev:type> <maml:name></maml:name> <maml:uri/> <maml:description> <maml:para></maml:para> </maml:description> </dev:type> <maml:description></maml:description> </command:inputType> </command:inputTypes> <command:returnValues> <command:returnValue> <dev:type> <maml:name>One or more VDPortgroupOverridePolicy objects</maml:name> <maml:uri /> <maml:description> <maml:para></maml:para> </maml:description> </dev:type> <maml:description></maml:description> </command:returnValue> </command:returnValues> <command:terminatingErrors> </command:terminatingErrors> <command:nonTerminatingErrors> </command:nonTerminatingErrors> <maml:alertSet> <maml:title></maml:title> <maml:alert> <maml:para></maml:para> </maml:alert> </maml:alertSet> <command:examples> <command:example> <maml:title> -------------- Example 1 -------------- </maml:title> <maml:introduction> <maml:para>C:\PS></maml:para> C:\PS> </maml:introduction> <dev:code>Get-VDPortgroup "MyVDPortgroup" | Get-VDPortgroupOverridePolicy</dev:code> <dev:remarks> <maml:para>Retrieves the overriding policy settings of a distributed port group named "MyVDPortgroup".</maml:para> <maml:para></maml:para> <maml:para></maml:para> <maml:para> </maml:para> <maml:para></maml:para> </dev:remarks> <command:commandLines> <command:commandLine> <command:commandText> </command:commandText> </command:commandLine> </command:commandLines> </command:example> </command:examples> <maml:relatedLinks> <maml:navigationLink> <maml:linkText>Online version:</maml:linkText> <maml:uri>https://code.vmware.com/doc/preview?id=6330#/doc/Get-VDPortgroupOverridePolicy.html</maml:uri> </maml:navigationLink> <maml:navigationLink> <maml:linkText>Set-VDPortgroupOverridePolicy</maml:linkText> <maml:uri></maml:uri> </maml:navigationLink> </maml:relatedLinks> </command:command> <command:command xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10"> <command:details> <command:name>Get-VDSecurityPolicy</command:name> <maml:description> <maml:para>This cmdlet retrieves the security policy for distributed ports.</maml:para> </maml:description> <maml:copyright> <maml:para /> <!--Add copy right info here.--> </maml:copyright> <command:verb>Get</command:verb> <command:noun>VDSecurityPolicy</command:noun> <!--Add Dev version info here.--> <dev:version /> </command:details> <maml:description> <!--This is the Description section--> <maml:para>This cmdlet retrieves the security policy for distributed ports. For distributed port group and vSphere distributed switch parameter sets, the default port policy at the distributed port group or switch level is retrieved.</maml:para> </maml:description> <command:syntax> <command:syntaxItem> <maml:name>Get-VDSecurityPolicy</maml:name> <command:parameter required = "true" variableLength = "true" globbing = "false" pipelineInput = "true (ByValue)" position = "named" > <maml:name>VDPortgroup</maml:name> <maml:description> <maml:para>Specifies a distributed port group for which you want to retrieve the default security policy.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "true" >VDPortgroup[]</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "true" globbing = "true" pipelineInput = "false" position = "named" > <maml:name>Server</maml:name> <maml:description> <maml:para>Specifies the vCenter Server systems on which you want to run the cmdlet. If no value is given to this parameter, the command runs on the default servers. For more information about default servers, see the description of Connect-VIServer.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "true" >VIServer[]</command:parameterValue> </command:parameter> </command:syntaxItem> <command:syntaxItem> <maml:name>Get-VDSecurityPolicy</maml:name> <command:parameter required = "true" variableLength = "true" globbing = "false" pipelineInput = "true (ByValue)" position = "named" > <maml:name>VDSwitch</maml:name> <maml:description> <maml:para>Specifies a vSphere distributed switch for which you want to retrieve the default security policy.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "true" >VDSwitch[]</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "true" globbing = "true" pipelineInput = "false" position = "named" > <maml:name>Server</maml:name> <maml:description> <maml:para>Specifies the vCenter Server systems on which you want to run the cmdlet. If no value is given to this parameter, the command runs on the default servers. For more information about default servers, see the description of Connect-VIServer.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "true" >VIServer[]</command:parameterValue> </command:parameter> </command:syntaxItem> <command:syntaxItem> <maml:name>Get-VDSecurityPolicy</maml:name> <command:parameter required = "true" variableLength = "true" globbing = "false" pipelineInput = "true (ByValue)" position = "named" > <maml:name>VDPort</maml:name> <maml:description> <maml:para>Specifies the distributed ports for which you want to retrieve the security policy.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "true" >VDPort[]</command:parameterValue> </command:parameter> </command:syntaxItem> </command:syntax> <command:parameters> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="true (ByValue)" position="named"> <maml:name>VDPortgroup</maml:name> <maml:description> <maml:para>Specifies a distributed port group for which you want to retrieve the default security policy.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="true">VDPortgroup[]</command:parameterValue> <dev:type> <maml:name>VDPortgroup[]</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="true" pipelineInput="false" position="named"> <maml:name>Server</maml:name> <maml:description> <maml:para>Specifies the vCenter Server systems on which you want to run the cmdlet. If no value is given to this parameter, the command runs on the default servers. For more information about default servers, see the description of Connect-VIServer.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="true">VIServer[]</command:parameterValue> <dev:type> <maml:name>VIServer[]</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="true (ByValue)" position="named"> <maml:name>VDSwitch</maml:name> <maml:description> <maml:para>Specifies a vSphere distributed switch for which you want to retrieve the default security policy.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="true">VDSwitch[]</command:parameterValue> <dev:type> <maml:name>VDSwitch[]</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="true (ByValue)" position="named"> <maml:name>VDPort</maml:name> <maml:description> <maml:para>Specifies the distributed ports for which you want to retrieve the security policy.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="true">VDPort[]</command:parameterValue> <dev:type> <maml:name>VDPort[]</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> </command:parameters> <command:inputTypes> <command:inputType> <dev:type> <maml:name></maml:name> <maml:uri/> <maml:description> <maml:para></maml:para> </maml:description> </dev:type> <maml:description></maml:description> </command:inputType> </command:inputTypes> <command:returnValues> <command:returnValue> <dev:type> <maml:name>One or more SecurityPolicy objects</maml:name> <maml:uri /> <maml:description> <maml:para></maml:para> </maml:description> </dev:type> <maml:description></maml:description> </command:returnValue> </command:returnValues> <command:terminatingErrors> </command:terminatingErrors> <command:nonTerminatingErrors> </command:nonTerminatingErrors> <maml:alertSet> <maml:title></maml:title> <maml:alert> <maml:para></maml:para> </maml:alert> </maml:alertSet> <command:examples> <command:example> <maml:title> -------------- Example 1 -------------- </maml:title> <maml:introduction> <maml:para>C:\PS></maml:para> C:\PS> </maml:introduction> <dev:code>Get-VDSwitch "MyVDSwitch" | Get-VDSecurityPolicy</dev:code> <dev:remarks> <maml:para>Retrieves the security policy of a vSphere distributed switch named "MyVDSwitch".</maml:para> <maml:para></maml:para> <maml:para></maml:para> <maml:para> </maml:para> <maml:para></maml:para> </dev:remarks> <command:commandLines> <command:commandLine> <command:commandText> </command:commandText> </command:commandLine> </command:commandLines> </command:example> <command:example> <maml:title> -------------- Example 2 -------------- </maml:title> <maml:introduction> <maml:para>C:\PS></maml:para> C:\PS> </maml:introduction> <dev:code>Get-VDPortgroup "MyVDPortgroup" | Get-VDPort -Key 4 | Get-VDSecurityPolicy</dev:code> <dev:remarks> <maml:para>Retrieves the security policies of a specific port inside a distributed port group named "MyVDPortgroup".</maml:para> <maml:para></maml:para> <maml:para></maml:para> <maml:para> </maml:para> <maml:para></maml:para> </dev:remarks> <command:commandLines> <command:commandLine> <command:commandText> </command:commandText> </command:commandLine> </command:commandLines> </command:example> </command:examples> <maml:relatedLinks> <maml:navigationLink> <maml:linkText>Online version:</maml:linkText> <maml:uri>https://code.vmware.com/doc/preview?id=6330#/doc/Get-VDSecurityPolicy.html</maml:uri> </maml:navigationLink> <maml:navigationLink> <maml:linkText>Set-VDSecurityPolicy</maml:linkText> <maml:uri></maml:uri> </maml:navigationLink> </maml:relatedLinks> </command:command> <command:command xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10"> <command:details> <command:name>Get-VDSwitch</command:name> <maml:description> <maml:para>This cmdlet retrieves vSphere distributed switches.</maml:para> </maml:description> <maml:copyright> <maml:para /> <!--Add copy right info here.--> </maml:copyright> <command:verb>Get</command:verb> <command:noun>VDSwitch</command:noun> <!--Add Dev version info here.--> <dev:version /> </command:details> <maml:description> <!--This is the Description section--> <maml:para>This cmdlet retrieves vSphere distributed switches.</maml:para> </maml:description> <command:syntax> <command:syntaxItem> <maml:name>Get-VDSwitch</maml:name> <command:parameter required = "false" variableLength = "true" globbing = "true" pipelineInput = "false" position = "1" > <maml:name>Name</maml:name> <maml:description> <maml:para>Specifies the names of the vSphere distributed switches that you want to retrieve.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "true" >String[]</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "true" globbing = "true" pipelineInput = "true (ByValue)" position = "named" > <maml:name>Location</maml:name> <maml:description> <maml:para>Specifies vCenter Server container objects that you want to search for vSphere distributed switches. This parameter accepts Datacenter and Folder objects.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "true" >FolderContainer[]</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "true" globbing = "true" pipelineInput = "true (ByValue)" position = "named" > <maml:name>VMHost</maml:name> <maml:description> <maml:para>Specifies hosts to retrieve vSphere distributed switches to which the hosts are added.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "true" >VMHost[]</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "true" globbing = "true" pipelineInput = "true (ByValue)" position = "named" > <maml:name>VM</maml:name> <maml:description> <maml:para>Specifies virtual machines to retrieve vSphere distributed switches they are connected to.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "true" >VirtualMachine[]</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "true" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>Tag</maml:name> <maml:description> <maml:para>Returns only the vSphere distributed switches that are associated with any of the specified tags.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "true" >Tag[]</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "true" globbing = "true" pipelineInput = "false" position = "named" > <maml:name>Server</maml:name> <maml:description> <maml:para>Specify the cloud servers on which you want to run the cmdlet. If no value is given to this parameter, the command runs on the default servers. For more information about default servers, see the description of Connect-CIServer.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "true" >VIServer[]</command:parameterValue> </command:parameter> </command:syntaxItem> <command:syntaxItem> <maml:name>Get-VDSwitch</maml:name> <command:parameter required = "true" variableLength = "true" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>Id</maml:name> <maml:description> <maml:para>Specifies the IDs of the vSphere distributed switches that you want to retrieve. Note: When a list of values is specified for the Id parameter, the returned objects would have an ID that matches exactly one of the string values in that list.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "true" >String[]</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "true" globbing = "true" pipelineInput = "false" position = "named" > <maml:name>Server</maml:name> <maml:description> <maml:para>Specify the cloud servers on which you want to run the cmdlet. If no value is given to this parameter, the command runs on the default servers. For more information about default servers, see the description of Connect-CIServer.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "true" >VIServer[]</command:parameterValue> </command:parameter> </command:syntaxItem> <command:syntaxItem> <maml:name>Get-VDSwitch</maml:name> <command:parameter required = "true" variableLength = "true" globbing = "false" pipelineInput = "true (ByValue)" position = "named" > <maml:name>RelatedObject</maml:name> <maml:description> <maml:para>Specifies an object to retrieve one or more vSphere distributed switches that are related to the object. This parameter accepts NetworkPool and OMResource objects.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "true" >VDSwitchRelatedObjectBase[]</command:parameterValue> </command:parameter> </command:syntaxItem> </command:syntax> <command:parameters> <command:parameter required="false" variableLength="true" globbing="true" pipelineInput="false" position="1"> <maml:name>Name</maml:name> <maml:description> <maml:para>Specifies the names of the vSphere distributed switches that you want to retrieve.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="true">String[]</command:parameterValue> <dev:type> <maml:name>String[]</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="true" pipelineInput="true (ByValue)" position="named"> <maml:name>Location</maml:name> <maml:description> <maml:para>Specifies vCenter Server container objects that you want to search for vSphere distributed switches. This parameter accepts Datacenter and Folder objects.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="true">FolderContainer[]</command:parameterValue> <dev:type> <maml:name>FolderContainer[]</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="true" pipelineInput="true (ByValue)" position="named"> <maml:name>VMHost</maml:name> <maml:description> <maml:para>Specifies hosts to retrieve vSphere distributed switches to which the hosts are added.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="true">VMHost[]</command:parameterValue> <dev:type> <maml:name>VMHost[]</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="true" pipelineInput="true (ByValue)" position="named"> <maml:name>VM</maml:name> <maml:description> <maml:para>Specifies virtual machines to retrieve vSphere distributed switches they are connected to.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="true">VirtualMachine[]</command:parameterValue> <dev:type> <maml:name>VirtualMachine[]</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="false" position="named"> <maml:name>Tag</maml:name> <maml:description> <maml:para>Returns only the vSphere distributed switches that are associated with any of the specified tags.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="true">Tag[]</command:parameterValue> <dev:type> <maml:name>Tag[]</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="true" pipelineInput="false" position="named"> <maml:name>Server</maml:name> <maml:description> <maml:para>Specify the cloud servers on which you want to run the cmdlet. If no value is given to this parameter, the command runs on the default servers. For more information about default servers, see the description of Connect-CIServer.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="true">VIServer[]</command:parameterValue> <dev:type> <maml:name>VIServer[]</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="false" position="named"> <maml:name>Id</maml:name> <maml:description> <maml:para>Specifies the IDs of the vSphere distributed switches that you want to retrieve. Note: When a list of values is specified for the Id parameter, the returned objects would have an ID that matches exactly one of the string values in that list.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="true">String[]</command:parameterValue> <dev:type> <maml:name>String[]</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="true (ByValue)" position="named"> <maml:name>RelatedObject</maml:name> <maml:description> <maml:para>Specifies an object to retrieve one or more vSphere distributed switches that are related to the object. This parameter accepts NetworkPool and OMResource objects.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="true">VDSwitchRelatedObjectBase[]</command:parameterValue> <dev:type> <maml:name>VDSwitchRelatedObjectBase[]</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> </command:parameters> <command:inputTypes> <command:inputType> <dev:type> <maml:name></maml:name> <maml:uri/> <maml:description> <maml:para></maml:para> </maml:description> </dev:type> <maml:description></maml:description> </command:inputType> </command:inputTypes> <command:returnValues> <command:returnValue> <dev:type> <maml:name>Zero or more VDSwitch objects</maml:name> <maml:uri /> <maml:description> <maml:para></maml:para> </maml:description> </dev:type> <maml:description></maml:description> </command:returnValue> </command:returnValues> <command:terminatingErrors> </command:terminatingErrors> <command:nonTerminatingErrors> </command:nonTerminatingErrors> <maml:alertSet> <maml:title></maml:title> <maml:alert> <maml:para></maml:para> </maml:alert> </maml:alertSet> <command:examples> <command:example> <maml:title> -------------- Example 1 -------------- </maml:title> <maml:introduction> <maml:para>C:\PS></maml:para> C:\PS> </maml:introduction> <dev:code>Get-Datacenter -Name MyDatacenter | Get-VDSwitch</dev:code> <dev:remarks> <maml:para>Retrieves all vSphere distributed switches in the specified datacenter.</maml:para> <maml:para></maml:para> <maml:para></maml:para> <maml:para> </maml:para> <maml:para></maml:para> </dev:remarks> <command:commandLines> <command:commandLine> <command:commandText> </command:commandText> </command:commandLine> </command:commandLines> </command:example> <command:example> <maml:title> -------------- Example 2 -------------- </maml:title> <maml:introduction> <maml:para>C:\PS></maml:para> C:\PS> </maml:introduction> <dev:code>Get-VMHost -Name MyVMHost | Get-VDSwitch</dev:code> <dev:remarks> <maml:para>Retrieves all vSphere distributed switches to which the specified host is added.</maml:para> <maml:para></maml:para> <maml:para></maml:para> <maml:para> </maml:para> <maml:para></maml:para> </dev:remarks> <command:commandLines> <command:commandLine> <command:commandText> </command:commandText> </command:commandLine> </command:commandLines> </command:example> <command:example> <maml:title> -------------- Example 3 -------------- </maml:title> <maml:introduction> <maml:para>C:\PS></maml:para> C:\PS> </maml:introduction> <dev:code>Get-VM -Name MyVM | Get-VDSwitch</dev:code> <dev:remarks> <maml:para>Retrieves all vSphere distributed switches to which the specified virtual machine is connected.</maml:para> <maml:para></maml:para> <maml:para></maml:para> <maml:para> </maml:para> <maml:para></maml:para> </dev:remarks> <command:commandLines> <command:commandLine> <command:commandText> </command:commandText> </command:commandLine> </command:commandLines> </command:example> </command:examples> <maml:relatedLinks> <maml:navigationLink> <maml:linkText>Online version:</maml:linkText> <maml:uri>https://code.vmware.com/doc/preview?id=6330#/doc/Get-VDSwitch.html</maml:uri> </maml:navigationLink> <maml:navigationLink> <maml:linkText>Remove-VDSwitch</maml:linkText> <maml:uri></maml:uri> </maml:navigationLink> <maml:navigationLink> <maml:linkText>New-VDSwitch</maml:linkText> <maml:uri></maml:uri> </maml:navigationLink> <maml:navigationLink> <maml:linkText>Set-VDSwitch</maml:linkText> <maml:uri></maml:uri> </maml:navigationLink> <maml:navigationLink> <maml:linkText>Export-VDSwitch</maml:linkText> <maml:uri></maml:uri> </maml:navigationLink> </maml:relatedLinks> </command:command> <command:command xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10"> <command:details> <command:name>Get-VDSwitchPrivateVlan</command:name> <maml:description> <maml:para>This cmdlet retrieves the private VLAN configuration entries of a vSphere distributed switch.</maml:para> </maml:description> <maml:copyright> <maml:para /> <!--Add copy right info here.--> </maml:copyright> <command:verb>Get</command:verb> <command:noun>VDSwitchPrivateVlan</command:noun> <!--Add Dev version info here.--> <dev:version /> </command:details> <maml:description> <!--This is the Description section--> <maml:para>This cmdlet retrieves the private VLAN configuration entries of a vSphere distributed switch.</maml:para> </maml:description> <command:syntax> <command:syntaxItem> <maml:name>Get-VDSwitchPrivateVlan</maml:name> <command:parameter required = "true" variableLength = "true" globbing = "true" pipelineInput = "true (ByValue)" position = "1" > <maml:name>VDSwitch</maml:name> <maml:description> <maml:para>Specifies the vSphere distributed switch whose private VLAN configuration entries to retrieve.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "true" >VDSwitch[]</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "true" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>PrimaryVlanId</maml:name> <maml:description> <maml:para>Specifies the primary VLAN ID of the private VLAN configuration entries that you want to retrieve.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "true" >Int32[]</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "true" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>SecondaryVlanId</maml:name> <maml:description> <maml:para>Specifies the secondary VLAN ID of the private VLAN configuration entries that you want to retrieve.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "true" >Int32[]</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "true" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>PrivateVlanType</maml:name> <maml:description> <maml:para>Specifies the private VLAN type of the VLAN configuration entries that you want to retrieve.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "true" >PrivateVlanType[]</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "true" globbing = "true" pipelineInput = "false" position = "named" > <maml:name>Server</maml:name> <maml:description> <maml:para>Specifies the vCenter Server systems on which you want to run the cmdlet. If no value is given to this parameter, the command runs on the default servers. For more information about default servers, see the description of Connect-VIServer.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "true" >VIServer[]</command:parameterValue> </command:parameter> </command:syntaxItem> </command:syntax> <command:parameters> <command:parameter required="true" variableLength="true" globbing="true" pipelineInput="true (ByValue)" position="1"> <maml:name>VDSwitch</maml:name> <maml:description> <maml:para>Specifies the vSphere distributed switch whose private VLAN configuration entries to retrieve.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="true">VDSwitch[]</command:parameterValue> <dev:type> <maml:name>VDSwitch[]</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="false" position="named"> <maml:name>PrimaryVlanId</maml:name> <maml:description> <maml:para>Specifies the primary VLAN ID of the private VLAN configuration entries that you want to retrieve.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="true">Int32[]</command:parameterValue> <dev:type> <maml:name>Int32[]</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="false" position="named"> <maml:name>SecondaryVlanId</maml:name> <maml:description> <maml:para>Specifies the secondary VLAN ID of the private VLAN configuration entries that you want to retrieve.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="true">Int32[]</command:parameterValue> <dev:type> <maml:name>Int32[]</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="false" position="named"> <maml:name>PrivateVlanType</maml:name> <maml:description> <maml:para>Specifies the private VLAN type of the VLAN configuration entries that you want to retrieve.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="true">PrivateVlanType[]</command:parameterValue> <dev:type> <maml:name>PrivateVlanType[]</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="true" pipelineInput="false" position="named"> <maml:name>Server</maml:name> <maml:description> <maml:para>Specifies the vCenter Server systems on which you want to run the cmdlet. If no value is given to this parameter, the command runs on the default servers. For more information about default servers, see the description of Connect-VIServer.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="true">VIServer[]</command:parameterValue> <dev:type> <maml:name>VIServer[]</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> </command:parameters> <command:inputTypes> <command:inputType> <dev:type> <maml:name></maml:name> <maml:uri/> <maml:description> <maml:para></maml:para> </maml:description> </dev:type> <maml:description></maml:description> </command:inputType> </command:inputTypes> <command:returnValues> <command:returnValue> <dev:type> <maml:name>Zero or more VDSwitchPrivateVlan objects</maml:name> <maml:uri /> <maml:description> <maml:para></maml:para> </maml:description> </dev:type> <maml:description></maml:description> </command:returnValue> </command:returnValues> <command:terminatingErrors> </command:terminatingErrors> <command:nonTerminatingErrors> </command:nonTerminatingErrors> <maml:alertSet> <maml:title></maml:title> <maml:alert> <maml:para></maml:para> </maml:alert> </maml:alertSet> <command:examples> <command:example> <maml:title> -------------- Example 1 -------------- </maml:title> <maml:introduction> <maml:para>C:\PS></maml:para> C:\PS> </maml:introduction> <dev:code>Get-VDSwitch "MyVDSwitch" | Get-VDSwitchPrivateVlan -PrivateVlanType Isolated</dev:code> <dev:remarks> <maml:para>Retrieves all private VLAN entries of a vSphere distributed switch named "MyVDSwitch" with specified 'isolated' VLAN port type.</maml:para> <maml:para></maml:para> <maml:para></maml:para> <maml:para> </maml:para> <maml:para></maml:para> </dev:remarks> <command:commandLines> <command:commandLine> <command:commandText> </command:commandText> </command:commandLine> </command:commandLines> </command:example> <command:example> <maml:title> -------------- Example 2 -------------- </maml:title> <maml:introduction> <maml:para>C:\PS></maml:para> C:\PS> </maml:introduction> <dev:code>Get-VDSwitch "MyVDSwitch" | Get-VDSwitchPrivateVlan -PrimaryVlanId 1,3</dev:code> <dev:remarks> <maml:para>Retrieves the private VLAN entries of a vSphere distributed switch named "MyVDSwitch" with primary VLAN identifiers 1 and 3.</maml:para> <maml:para></maml:para> <maml:para></maml:para> <maml:para> </maml:para> <maml:para></maml:para> </dev:remarks> <command:commandLines> <command:commandLine> <command:commandText> </command:commandText> </command:commandLine> </command:commandLines> </command:example> </command:examples> <maml:relatedLinks> <maml:navigationLink> <maml:linkText>Online version:</maml:linkText> <maml:uri>https://code.vmware.com/doc/preview?id=6330#/doc/Get-VDSwitchPrivateVlan.html</maml:uri> </maml:navigationLink> <maml:navigationLink> <maml:linkText>New-VDSwitchPrivateVlan</maml:linkText> <maml:uri></maml:uri> </maml:navigationLink> <maml:navigationLink> <maml:linkText>Remove-VDSwitchPrivateVlan</maml:linkText> <maml:uri></maml:uri> </maml:navigationLink> </maml:relatedLinks> </command:command> <command:command xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10"> <command:details> <command:name>Get-VDTrafficShapingPolicy</command:name> <maml:description> <maml:para>This cmdlet retrieves the traffic shaping policy for distributed ports.</maml:para> </maml:description> <maml:copyright> <maml:para /> <!--Add copy right info here.--> </maml:copyright> <command:verb>Get</command:verb> <command:noun>VDTrafficShapingPolicy</command:noun> <!--Add Dev version info here.--> <dev:version /> </command:details> <maml:description> <!--This is the Description section--> <maml:para>This cmdlet retrieves the traffic shaping policy for distributed ports. For distributed port group and vSphere distributed switch parameter sets, the default port policy at the distributed port group or switch level is retrieved.</maml:para> </maml:description> <command:syntax> <command:syntaxItem> <maml:name>Get-VDTrafficShapingPolicy</maml:name> <command:parameter required = "true" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>Direction</maml:name> <maml:description> <maml:para>Specifies the direction of the traffic shaping policy.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "false" >TrafficDirection</command:parameterValue> </command:parameter> <command:parameter required = "true" variableLength = "true" globbing = "false" pipelineInput = "true (ByValue)" position = "named" > <maml:name>VDPortgroup</maml:name> <maml:description> <maml:para>Specifies a distributed port group for which you want to retrieve the default traffic shaping policy.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "true" >VDPortgroup[]</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "true" globbing = "true" pipelineInput = "false" position = "named" > <maml:name>Server</maml:name> <maml:description> <maml:para>Specifies the vCenter Server systems on which you want to run the cmdlet. If no value is given to this parameter, the command runs on the default servers. For more information about default servers, see the description of Connect-VIServer.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "true" >VIServer[]</command:parameterValue> </command:parameter> </command:syntaxItem> <command:syntaxItem> <maml:name>Get-VDTrafficShapingPolicy</maml:name> <command:parameter required = "true" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>Direction</maml:name> <maml:description> <maml:para>Specifies the direction of the traffic shaping policy.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "false" >TrafficDirection</command:parameterValue> </command:parameter> <command:parameter required = "true" variableLength = "true" globbing = "false" pipelineInput = "true (ByValue)" position = "named" > <maml:name>VDSwitch</maml:name> <maml:description> <maml:para>Specifies a vSphere distributed switch for which you want to retrieve the default traffic shaping policy.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "true" >VDSwitch[]</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "true" globbing = "true" pipelineInput = "false" position = "named" > <maml:name>Server</maml:name> <maml:description> <maml:para>Specifies the vCenter Server systems on which you want to run the cmdlet. If no value is given to this parameter, the command runs on the default servers. For more information about default servers, see the description of Connect-VIServer.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "true" >VIServer[]</command:parameterValue> </command:parameter> </command:syntaxItem> <command:syntaxItem> <maml:name>Get-VDTrafficShapingPolicy</maml:name> <command:parameter required = "true" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>Direction</maml:name> <maml:description> <maml:para>Specifies the direction of the traffic shaping policy.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "false" >TrafficDirection</command:parameterValue> </command:parameter> <command:parameter required = "true" variableLength = "true" globbing = "false" pipelineInput = "true (ByValue)" position = "named" > <maml:name>VDPort</maml:name> <maml:description> <maml:para>Specifies the distributed ports for which you want to retrieve the traffic shaping policy.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "true" >VDPort[]</command:parameterValue> </command:parameter> </command:syntaxItem> </command:syntax> <command:parameters> <command:parameter required="true" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>Direction</maml:name> <maml:description> <maml:para>Specifies the direction of the traffic shaping policy.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">TrafficDirection</command:parameterValue> <dev:type> <maml:name>TrafficDirection</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="true (ByValue)" position="named"> <maml:name>VDPortgroup</maml:name> <maml:description> <maml:para>Specifies a distributed port group for which you want to retrieve the default traffic shaping policy.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="true">VDPortgroup[]</command:parameterValue> <dev:type> <maml:name>VDPortgroup[]</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="true" pipelineInput="false" position="named"> <maml:name>Server</maml:name> <maml:description> <maml:para>Specifies the vCenter Server systems on which you want to run the cmdlet. If no value is given to this parameter, the command runs on the default servers. For more information about default servers, see the description of Connect-VIServer.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="true">VIServer[]</command:parameterValue> <dev:type> <maml:name>VIServer[]</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="true (ByValue)" position="named"> <maml:name>VDSwitch</maml:name> <maml:description> <maml:para>Specifies a vSphere distributed switch for which you want to retrieve the default traffic shaping policy.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="true">VDSwitch[]</command:parameterValue> <dev:type> <maml:name>VDSwitch[]</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="true (ByValue)" position="named"> <maml:name>VDPort</maml:name> <maml:description> <maml:para>Specifies the distributed ports for which you want to retrieve the traffic shaping policy.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="true">VDPort[]</command:parameterValue> <dev:type> <maml:name>VDPort[]</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> </command:parameters> <command:inputTypes> <command:inputType> <dev:type> <maml:name></maml:name> <maml:uri/> <maml:description> <maml:para></maml:para> </maml:description> </dev:type> <maml:description></maml:description> </command:inputType> </command:inputTypes> <command:returnValues> <command:returnValue> <dev:type> <maml:name>One or more TrafficShapingPolicy objects</maml:name> <maml:uri /> <maml:description> <maml:para></maml:para> </maml:description> </dev:type> <maml:description></maml:description> </command:returnValue> </command:returnValues> <command:terminatingErrors> </command:terminatingErrors> <command:nonTerminatingErrors> </command:nonTerminatingErrors> <maml:alertSet> <maml:title></maml:title> <maml:alert> <maml:para></maml:para> </maml:alert> </maml:alertSet> <command:examples> <command:example> <maml:title> -------------- Example 1 -------------- </maml:title> <maml:introduction> <maml:para>C:\PS></maml:para> C:\PS> </maml:introduction> <dev:code>Get-VDSwitch "MyVDSwitch" | Get-VDTrafficShapingPolicy -Direction In</dev:code> <dev:remarks> <maml:para>Retrieves the ingress traffic shaping policy of a vSphere distributed switch named "MyVDSwitch".</maml:para> <maml:para></maml:para> <maml:para></maml:para> <maml:para> </maml:para> <maml:para></maml:para> </dev:remarks> <command:commandLines> <command:commandLine> <command:commandText> </command:commandText> </command:commandLine> </command:commandLines> </command:example> <command:example> <maml:title> -------------- Example 2 -------------- </maml:title> <maml:introduction> <maml:para>C:\PS></maml:para> C:\PS> </maml:introduction> <dev:code>Get-VDPortgroup "MyVDPortgroup" | Get-VDPort | Get-VDTrafficShapingPolicy -Direction Out</dev:code> <dev:remarks> <maml:para>Retrieves the engress traffic shaping policies of all ports inside a distributed port group named "MyVDPortgroup".</maml:para> <maml:para></maml:para> <maml:para></maml:para> <maml:para> </maml:para> <maml:para></maml:para> </dev:remarks> <command:commandLines> <command:commandLine> <command:commandText> </command:commandText> </command:commandLine> </command:commandLines> </command:example> </command:examples> <maml:relatedLinks> <maml:navigationLink> <maml:linkText>Online version:</maml:linkText> <maml:uri>https://code.vmware.com/doc/preview?id=6330#/doc/Get-VDTrafficShapingPolicy.html</maml:uri> </maml:navigationLink> <maml:navigationLink> <maml:linkText>Set-VDTrafficShapingPolicy</maml:linkText> <maml:uri></maml:uri> </maml:navigationLink> </maml:relatedLinks> </command:command> <command:command xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10"> <command:details> <command:name>Get-VDUplinkLacpPolicy</command:name> <maml:description> <maml:para>This cmdlet retrieves the Link Aggregation Control Protocol policy for uplink ports.</maml:para> </maml:description> <maml:copyright> <maml:para /> <!--Add copy right info here.--> </maml:copyright> <command:verb>Get</command:verb> <command:noun>VDUplinkLacpPolicy</command:noun> <!--Add Dev version info here.--> <dev:version /> </command:details> <maml:description> <!--This is the Description section--> <maml:para>This cmdlet retrieves the Link Aggregation Control Protocol policy for uplink ports. For uplink port group and vSphere distributed switch parameter sets, the default port policy at the uplink port group or switch level is retrieved.</maml:para> </maml:description> <command:syntax> <command:syntaxItem> <maml:name>Get-VDUplinkLacpPolicy</maml:name> <command:parameter required = "true" variableLength = "true" globbing = "false" pipelineInput = "true (ByValue)" position = "named" > <maml:name>VDPortgroup</maml:name> <maml:description> <maml:para>Specifies an uplink port group for which you want to retrieve the default Link Aggregation Control Protocol policy.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "true" >VDPortgroup[]</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "true" globbing = "true" pipelineInput = "false" position = "named" > <maml:name>Server</maml:name> <maml:description> <maml:para>Specifies the vCenter Server systems on which you want to run the cmdlet. If no value is given to this parameter, the command runs on the default servers. For more information about default servers, see the description of Connect-VIServer.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "true" >VIServer[]</command:parameterValue> </command:parameter> </command:syntaxItem> <command:syntaxItem> <maml:name>Get-VDUplinkLacpPolicy</maml:name> <command:parameter required = "true" variableLength = "true" globbing = "false" pipelineInput = "true (ByValue)" position = "named" > <maml:name>VDSwitch</maml:name> <maml:description> <maml:para>Specifies a vSphere distributed switch for which you want to retrieve the default Link Aggregation Control Protocol policy.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "true" >VDSwitch[]</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "true" globbing = "true" pipelineInput = "false" position = "named" > <maml:name>Server</maml:name> <maml:description> <maml:para>Specifies the vCenter Server systems on which you want to run the cmdlet. If no value is given to this parameter, the command runs on the default servers. For more information about default servers, see the description of Connect-VIServer.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "true" >VIServer[]</command:parameterValue> </command:parameter> </command:syntaxItem> <command:syntaxItem> <maml:name>Get-VDUplinkLacpPolicy</maml:name> <command:parameter required = "true" variableLength = "true" globbing = "false" pipelineInput = "true (ByValue)" position = "named" > <maml:name>VDPort</maml:name> <maml:description> <maml:para>Specifies the uplink port for which you want to retrieve the Link Aggregation Control Protocol policy.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "true" >VDPort[]</command:parameterValue> </command:parameter> </command:syntaxItem> </command:syntax> <command:parameters> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="true (ByValue)" position="named"> <maml:name>VDPortgroup</maml:name> <maml:description> <maml:para>Specifies an uplink port group for which you want to retrieve the default Link Aggregation Control Protocol policy.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="true">VDPortgroup[]</command:parameterValue> <dev:type> <maml:name>VDPortgroup[]</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="true" pipelineInput="false" position="named"> <maml:name>Server</maml:name> <maml:description> <maml:para>Specifies the vCenter Server systems on which you want to run the cmdlet. If no value is given to this parameter, the command runs on the default servers. For more information about default servers, see the description of Connect-VIServer.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="true">VIServer[]</command:parameterValue> <dev:type> <maml:name>VIServer[]</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="true (ByValue)" position="named"> <maml:name>VDSwitch</maml:name> <maml:description> <maml:para>Specifies a vSphere distributed switch for which you want to retrieve the default Link Aggregation Control Protocol policy.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="true">VDSwitch[]</command:parameterValue> <dev:type> <maml:name>VDSwitch[]</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="true (ByValue)" position="named"> <maml:name>VDPort</maml:name> <maml:description> <maml:para>Specifies the uplink port for which you want to retrieve the Link Aggregation Control Protocol policy.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="true">VDPort[]</command:parameterValue> <dev:type> <maml:name>VDPort[]</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> </command:parameters> <command:inputTypes> <command:inputType> <dev:type> <maml:name></maml:name> <maml:uri/> <maml:description> <maml:para></maml:para> </maml:description> </dev:type> <maml:description></maml:description> </command:inputType> </command:inputTypes> <command:returnValues> <command:returnValue> <dev:type> <maml:name>One or more UplinkLacpPolicy objects</maml:name> <maml:uri /> <maml:description> <maml:para></maml:para> </maml:description> </dev:type> <maml:description></maml:description> </command:returnValue> </command:returnValues> <command:terminatingErrors> </command:terminatingErrors> <command:nonTerminatingErrors> </command:nonTerminatingErrors> <maml:alertSet> <maml:title></maml:title> <maml:alert> <maml:para></maml:para> </maml:alert> </maml:alertSet> <command:examples> <command:example> <maml:title> -------------- Example 1 -------------- </maml:title> <maml:introduction> <maml:para>C:\PS></maml:para> C:\PS> </maml:introduction> <dev:code>Get-VDSwitch "MyVDSwitch" | Get-VDUplinkLacpPolicy</dev:code> <dev:remarks> <maml:para>Retrieves the Link Aggregation Control Protocol policy of a vSphere distributed switch named "MyVDSwitch".</maml:para> <maml:para></maml:para> <maml:para></maml:para> <maml:para> </maml:para> <maml:para></maml:para> </dev:remarks> <command:commandLines> <command:commandLine> <command:commandText> </command:commandText> </command:commandLine> </command:commandLines> </command:example> <command:example> <maml:title> -------------- Example 2 -------------- </maml:title> <maml:introduction> <maml:para>C:\PS></maml:para> C:\PS> </maml:introduction> <dev:code>Get-VDSwitch "MyVDSwitch" | Get-UplinkPortgroup "MyVDPortgroup" | Get-VDUplinkLacpPolicy</dev:code> <dev:remarks> <maml:para>Retrieves the Link Aggregation Control Protocol policy of an uplink port group named "MyUplinkPortgroup" inside a vSphere distributed switch named "MyVDSwitch".</maml:para> <maml:para></maml:para> <maml:para></maml:para> <maml:para> </maml:para> <maml:para></maml:para> </dev:remarks> <command:commandLines> <command:commandLine> <command:commandText> </command:commandText> </command:commandLine> </command:commandLines> </command:example> </command:examples> <maml:relatedLinks> <maml:navigationLink> <maml:linkText>Online version:</maml:linkText> <maml:uri>https://code.vmware.com/doc/preview?id=6330#/doc/Get-VDUplinkLacpPolicy.html</maml:uri> </maml:navigationLink> <maml:navigationLink> <maml:linkText>Set-VDUplinkLacpPolicy</maml:linkText> <maml:uri></maml:uri> </maml:navigationLink> </maml:relatedLinks> </command:command> <command:command xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10"> <command:details> <command:name>Get-VDUplinkTeamingPolicy</command:name> <maml:description> <maml:para>This cmdlet retrieves the uplink teaming policy for distributed ports.</maml:para> </maml:description> <maml:copyright> <maml:para /> <!--Add copy right info here.--> </maml:copyright> <command:verb>Get</command:verb> <command:noun>VDUplinkTeamingPolicy</command:noun> <!--Add Dev version info here.--> <dev:version /> </command:details> <maml:description> <!--This is the Description section--> <maml:para>This cmdlet retrieves the uplink teaming policy for distributed ports. For distributed port group and vSphere distributed switch parameter sets, the default port policy at the distributed port group or switch level is retrieved.</maml:para> </maml:description> <command:syntax> <command:syntaxItem> <maml:name>Get-VDUplinkTeamingPolicy</maml:name> <command:parameter required = "true" variableLength = "true" globbing = "false" pipelineInput = "true (ByValue)" position = "named" > <maml:name>VDPortgroup</maml:name> <maml:description> <maml:para>Specifies a distributed port group for which you want to retrieve the default uplink teaming policy.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "true" >VDPortgroup[]</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "true" globbing = "true" pipelineInput = "false" position = "named" > <maml:name>Server</maml:name> <maml:description> <maml:para>Specifies the vCenter Server systems on which you want to run the cmdlet. If no value is given to this parameter, the command runs on the default servers. For more information about default servers, see the description of Connect-VIServer.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "true" >VIServer[]</command:parameterValue> </command:parameter> </command:syntaxItem> <command:syntaxItem> <maml:name>Get-VDUplinkTeamingPolicy</maml:name> <command:parameter required = "true" variableLength = "true" globbing = "false" pipelineInput = "true (ByValue)" position = "named" > <maml:name>VDSwitch</maml:name> <maml:description> <maml:para>Specifies a vSphere distributed switch for which you want to retrieve the default uplink teaming policy.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "true" >VDSwitch[]</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "true" globbing = "true" pipelineInput = "false" position = "named" > <maml:name>Server</maml:name> <maml:description> <maml:para>Specifies the vCenter Server systems on which you want to run the cmdlet. If no value is given to this parameter, the command runs on the default servers. For more information about default servers, see the description of Connect-VIServer.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "true" >VIServer[]</command:parameterValue> </command:parameter> </command:syntaxItem> <command:syntaxItem> <maml:name>Get-VDUplinkTeamingPolicy</maml:name> <command:parameter required = "true" variableLength = "true" globbing = "false" pipelineInput = "true (ByValue)" position = "named" > <maml:name>VDPort</maml:name> <maml:description> <maml:para>Specifies the distributed port for which you want to retrieve the uplink teaming policy.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "true" >VDPort[]</command:parameterValue> </command:parameter> </command:syntaxItem> </command:syntax> <command:parameters> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="true (ByValue)" position="named"> <maml:name>VDPortgroup</maml:name> <maml:description> <maml:para>Specifies a distributed port group for which you want to retrieve the default uplink teaming policy.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="true">VDPortgroup[]</command:parameterValue> <dev:type> <maml:name>VDPortgroup[]</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="true" pipelineInput="false" position="named"> <maml:name>Server</maml:name> <maml:description> <maml:para>Specifies the vCenter Server systems on which you want to run the cmdlet. If no value is given to this parameter, the command runs on the default servers. For more information about default servers, see the description of Connect-VIServer.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="true">VIServer[]</command:parameterValue> <dev:type> <maml:name>VIServer[]</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="true (ByValue)" position="named"> <maml:name>VDSwitch</maml:name> <maml:description> <maml:para>Specifies a vSphere distributed switch for which you want to retrieve the default uplink teaming policy.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="true">VDSwitch[]</command:parameterValue> <dev:type> <maml:name>VDSwitch[]</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="true (ByValue)" position="named"> <maml:name>VDPort</maml:name> <maml:description> <maml:para>Specifies the distributed port for which you want to retrieve the uplink teaming policy.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="true">VDPort[]</command:parameterValue> <dev:type> <maml:name>VDPort[]</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> </command:parameters> <command:inputTypes> <command:inputType> <dev:type> <maml:name></maml:name> <maml:uri/> <maml:description> <maml:para></maml:para> </maml:description> </dev:type> <maml:description></maml:description> </command:inputType> </command:inputTypes> <command:returnValues> <command:returnValue> <dev:type> <maml:name>One or more UplinkTeamingPolicy objects</maml:name> <maml:uri /> <maml:description> <maml:para></maml:para> </maml:description> </dev:type> <maml:description></maml:description> </command:returnValue> </command:returnValues> <command:terminatingErrors> </command:terminatingErrors> <command:nonTerminatingErrors> </command:nonTerminatingErrors> <maml:alertSet> <maml:title></maml:title> <maml:alert> <maml:para></maml:para> </maml:alert> </maml:alertSet> <command:examples> <command:example> <maml:title> -------------- Example 1 -------------- </maml:title> <maml:introduction> <maml:para>C:\PS></maml:para> C:\PS> </maml:introduction> <dev:code>Get-VDSwitch "MyVDSwitch" | Get-VDUplinkTeamingPolicy</dev:code> <dev:remarks> <maml:para>Retrieves the uplink teaming policy of a vSphere distributed switch named "MyVDSwitch".</maml:para> <maml:para></maml:para> <maml:para></maml:para> <maml:para> </maml:para> <maml:para></maml:para> </dev:remarks> <command:commandLines> <command:commandLine> <command:commandText> </command:commandText> </command:commandLine> </command:commandLines> </command:example> <command:example> <maml:title> -------------- Example 2 -------------- </maml:title> <maml:introduction> <maml:para>C:\PS></maml:para> C:\PS> </maml:introduction> <dev:code>Get-VDPortgroup "MyVDPortgroup" | Get-VDPort | Get-VDUplinkTeamingPolicy</dev:code> <dev:remarks> <maml:para>Retrieves the uplink teaming policy of all ports inside a distributed port group named "MyVDPortgroup".</maml:para> <maml:para></maml:para> <maml:para></maml:para> <maml:para> </maml:para> <maml:para></maml:para> </dev:remarks> <command:commandLines> <command:commandLine> <command:commandText> </command:commandText> </command:commandLine> </command:commandLines> </command:example> </command:examples> <maml:relatedLinks> <maml:navigationLink> <maml:linkText>Online version:</maml:linkText> <maml:uri>https://code.vmware.com/doc/preview?id=6330#/doc/Get-VDUplinkTeamingPolicy.html</maml:uri> </maml:navigationLink> <maml:navigationLink> <maml:linkText>Set-VDUplinkTeamingPolicy</maml:linkText> <maml:uri></maml:uri> </maml:navigationLink> </maml:relatedLinks> </command:command> <command:command xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10"> <command:details> <command:name>New-VDPortgroup</command:name> <maml:description> <maml:para>This cmdlet creates distributed port groups.</maml:para> </maml:description> <maml:copyright> <maml:para /> <!--Add copy right info here.--> </maml:copyright> <command:verb>New</command:verb> <command:noun>VDPortgroup</command:noun> <!--Add Dev version info here.--> <dev:version /> </command:details> <maml:description> <!--This is the Description section--> <maml:para>This cmdlet creates distributed port groups. You can create a new distributed port group with custom properties, specify a reference port group to clone its properties, or provide a backup profile to import the port group configuration.</maml:para> </maml:description> <command:syntax> <command:syntaxItem> <maml:name>New-VDPortgroup</maml:name> <command:parameter required = "true" variableLength = "false" globbing = "true" pipelineInput = "true (ByValue)" position = "1" > <maml:name>VDSwitch</maml:name> <maml:description> <maml:para>Specifies the vSphere distributed switch on which you want to create the new distributed port group.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "false" >VDSwitch</command:parameterValue> </command:parameter> <command:parameter required = "true" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>Name</maml:name> <maml:description> <maml:para>Specifies the name of the new distributed port group that you want to create.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "false" >String</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>Notes</maml:name> <maml:description> <maml:para>Specifies a description for the new distributed port group that you want to create.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "false" >String</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>NumPorts</maml:name> <maml:description> <maml:para>Specifies the number of ports that the distributed port group will have. If you do not set this parameter, the number of ports for the new distributed port group is set to 128 ports.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "false" >Int32</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>VlanId</maml:name> <maml:description> <maml:para>Specifies the VLAN ID of the distributed port group that you want to create. Valid values are integers in the range of 1 to 4094.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "false" >Int32</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>VlanTrunkRange</maml:name> <maml:description> <maml:para>Specifies the VLAN trunk range for the distributed port group that you want to create. Valid values are strings representing ranges of IDs. For example, "1-4, 6, 8-9".</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "false" >VlanRangeList</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>PortBinding</maml:name> <maml:description> <maml:para>Specifies the port binding setting for the distributed port group that you want to create. This parameter accepts Static, Dynamic, and Ephemeral values. Note: Dynamic port binding is deprecated. For better performance, static port binding is recommended.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "false" >DistributedPortGroupPortBinding</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>RunAsync</maml:name> <maml:description> <maml:para>Indicates that the command returns immediately without waiting for the task to complete. In this mode, the output of the cmdlet is a Task object. For more information about the RunAsync parameter run "help About_RunAsync" in the VMware PowerCLI console.</maml:para> </maml:description> </command:parameter> <command:parameter required = "false" variableLength = "true" globbing = "true" pipelineInput = "false" position = "named" > <maml:name>Server</maml:name> <maml:description> <maml:para>Specifies the vCenter Server systems on which you want to run the cmdlet. If no value is given to this parameter, the command runs on the default servers. For more information about default servers, see the description of Connect-VIServer.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "true" >VIServer[]</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>WhatIf</maml:name> <maml:description> <maml:para>Indicates that the cmdlet is run only to display the changes that would be made and actually no objects are modified.</maml:para> </maml:description> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>Confirm</maml:name> <maml:description> <maml:para>If the value is $true, indicates that the cmdlet asks for confirmation before running. If the value is $false, the cmdlet runs without asking for user confirmation.</maml:para> </maml:description> </command:parameter> </command:syntaxItem> <command:syntaxItem> <maml:name>New-VDPortgroup</maml:name> <command:parameter required = "true" variableLength = "false" globbing = "true" pipelineInput = "true (ByValue)" position = "1" > <maml:name>VDSwitch</maml:name> <maml:description> <maml:para>Specifies the vSphere distributed switch on which you want to create the new distributed port group.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "false" >VDSwitch</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>Name</maml:name> <maml:description> <maml:para>Specifies the name of the new distributed port group that you want to create.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "false" >String</command:parameterValue> </command:parameter> <command:parameter required = "true" variableLength = "false" globbing = "true" pipelineInput = "true (ByValue)" position = "named" > <maml:name>ReferencePortgroup</maml:name> <maml:description> <maml:para>Specifies a reference distributed port group. The properties of the new distributed port group will be cloned from the reference distributed port group. Note: This parameter is supported only on vSphere 5.1 and later.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "false" >VDPortgroup</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>RunAsync</maml:name> <maml:description> <maml:para>Indicates that the command returns immediately without waiting for the task to complete. In this mode, the output of the cmdlet is a Task object. For more information about the RunAsync parameter run "help About_RunAsync" in the VMware PowerCLI console.</maml:para> </maml:description> </command:parameter> <command:parameter required = "false" variableLength = "true" globbing = "true" pipelineInput = "false" position = "named" > <maml:name>Server</maml:name> <maml:description> <maml:para>Specifies the vCenter Server systems on which you want to run the cmdlet. If no value is given to this parameter, the command runs on the default servers. For more information about default servers, see the description of Connect-VIServer.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "true" >VIServer[]</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>WhatIf</maml:name> <maml:description> <maml:para>Indicates that the cmdlet is run only to display the changes that would be made and actually no objects are modified.</maml:para> </maml:description> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>Confirm</maml:name> <maml:description> <maml:para>If the value is $true, indicates that the cmdlet asks for confirmation before running. If the value is $false, the cmdlet runs without asking for user confirmation.</maml:para> </maml:description> </command:parameter> </command:syntaxItem> <command:syntaxItem> <maml:name>New-VDPortgroup</maml:name> <command:parameter required = "true" variableLength = "false" globbing = "true" pipelineInput = "true (ByValue)" position = "1" > <maml:name>VDSwitch</maml:name> <maml:description> <maml:para>Specifies the vSphere distributed switch on which you want to create the new distributed port group.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "false" >VDSwitch</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>Name</maml:name> <maml:description> <maml:para>Specifies the name of the new distributed port group that you want to create.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "false" >String</command:parameterValue> </command:parameter> <command:parameter required = "true" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>BackupPath</maml:name> <maml:description> <maml:para>Specifies the full file path to the .zip file containing the backup configuration that you want to import. Only .zip files created with the Export-VDPortgroup cmdlet are supported. Note: This parameter is supported only on vSphere 5.1 and later.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "false" >String</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>KeepIdentifiers</maml:name> <maml:description> <maml:para>Indicates that the original vSphere distributed port group identifiers will be preserved. Note: This parameter is supported only on vSphere 5.1 and later.</maml:para> </maml:description> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>RunAsync</maml:name> <maml:description> <maml:para>Indicates that the command returns immediately without waiting for the task to complete. In this mode, the output of the cmdlet is a Task object. For more information about the RunAsync parameter run "help About_RunAsync" in the VMware PowerCLI console.</maml:para> </maml:description> </command:parameter> <command:parameter required = "false" variableLength = "true" globbing = "true" pipelineInput = "false" position = "named" > <maml:name>Server</maml:name> <maml:description> <maml:para>Specifies the vCenter Server systems on which you want to run the cmdlet. If no value is given to this parameter, the command runs on the default servers. For more information about default servers, see the description of Connect-VIServer.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "true" >VIServer[]</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>WhatIf</maml:name> <maml:description> <maml:para>Indicates that the cmdlet is run only to display the changes that would be made and actually no objects are modified.</maml:para> </maml:description> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>Confirm</maml:name> <maml:description> <maml:para>If the value is $true, indicates that the cmdlet asks for confirmation before running. If the value is $false, the cmdlet runs without asking for user confirmation.</maml:para> </maml:description> </command:parameter> </command:syntaxItem> </command:syntax> <command:parameters> <command:parameter required="true" variableLength="false" globbing="true" pipelineInput="true (ByValue)" position="1"> <maml:name>VDSwitch</maml:name> <maml:description> <maml:para>Specifies the vSphere distributed switch on which you want to create the new distributed port group.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">VDSwitch</command:parameterValue> <dev:type> <maml:name>VDSwitch</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="true" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>Name</maml:name> <maml:description> <maml:para>Specifies the name of the new distributed port group that you want to create.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">String</command:parameterValue> <dev:type> <maml:name>String</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>Notes</maml:name> <maml:description> <maml:para>Specifies a description for the new distributed port group that you want to create.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">String</command:parameterValue> <dev:type> <maml:name>String</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>NumPorts</maml:name> <maml:description> <maml:para>Specifies the number of ports that the distributed port group will have. If you do not set this parameter, the number of ports for the new distributed port group is set to 128 ports.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">Int32</command:parameterValue> <dev:type> <maml:name>Int32</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>VlanId</maml:name> <maml:description> <maml:para>Specifies the VLAN ID of the distributed port group that you want to create. Valid values are integers in the range of 1 to 4094.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">Int32</command:parameterValue> <dev:type> <maml:name>Int32</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>VlanTrunkRange</maml:name> <maml:description> <maml:para>Specifies the VLAN trunk range for the distributed port group that you want to create. Valid values are strings representing ranges of IDs. For example, "1-4, 6, 8-9".</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">VlanRangeList</command:parameterValue> <dev:type> <maml:name>VlanRangeList</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>PortBinding</maml:name> <maml:description> <maml:para>Specifies the port binding setting for the distributed port group that you want to create. This parameter accepts Static, Dynamic, and Ephemeral values. Note: Dynamic port binding is deprecated. For better performance, static port binding is recommended.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">DistributedPortGroupPortBinding</command:parameterValue> <dev:type> <maml:name>DistributedPortGroupPortBinding</maml:name> <maml:uri/> </dev:type> <dev:defaultValue>Static</dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>RunAsync</maml:name> <maml:description> <maml:para>Indicates that the command returns immediately without waiting for the task to complete. In this mode, the output of the cmdlet is a Task object. For more information about the RunAsync parameter run "help About_RunAsync" in the VMware PowerCLI console.</maml:para> </maml:description> <dev:type> <maml:name>SwitchParameter</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="true" pipelineInput="false" position="named"> <maml:name>Server</maml:name> <maml:description> <maml:para>Specifies the vCenter Server systems on which you want to run the cmdlet. If no value is given to this parameter, the command runs on the default servers. For more information about default servers, see the description of Connect-VIServer.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="true">VIServer[]</command:parameterValue> <dev:type> <maml:name>VIServer[]</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>WhatIf</maml:name> <maml:description> <maml:para>Indicates that the cmdlet is run only to display the changes that would be made and actually no objects are modified.</maml:para> </maml:description> <dev:type> <maml:name>SwitchParameter</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>Confirm</maml:name> <maml:description> <maml:para>If the value is $true, indicates that the cmdlet asks for confirmation before running. If the value is $false, the cmdlet runs without asking for user confirmation.</maml:para> </maml:description> <dev:type> <maml:name>SwitchParameter</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="true" variableLength="false" globbing="true" pipelineInput="true (ByValue)" position="named"> <maml:name>ReferencePortgroup</maml:name> <maml:description> <maml:para>Specifies a reference distributed port group. The properties of the new distributed port group will be cloned from the reference distributed port group. Note: This parameter is supported only on vSphere 5.1 and later.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">VDPortgroup</command:parameterValue> <dev:type> <maml:name>VDPortgroup</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="true" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>BackupPath</maml:name> <maml:description> <maml:para>Specifies the full file path to the .zip file containing the backup configuration that you want to import. Only .zip files created with the Export-VDPortgroup cmdlet are supported. Note: This parameter is supported only on vSphere 5.1 and later.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">String</command:parameterValue> <dev:type> <maml:name>String</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>KeepIdentifiers</maml:name> <maml:description> <maml:para>Indicates that the original vSphere distributed port group identifiers will be preserved. Note: This parameter is supported only on vSphere 5.1 and later.</maml:para> </maml:description> <dev:type> <maml:name>SwitchParameter</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> </command:parameters> <command:inputTypes> <command:inputType> <dev:type> <maml:name></maml:name> <maml:uri/> <maml:description> <maml:para></maml:para> </maml:description> </dev:type> <maml:description></maml:description> </command:inputType> </command:inputTypes> <command:returnValues> <command:returnValue> <dev:type> <maml:name>The newly created VDPortgroup object</maml:name> <maml:uri /> <maml:description> <maml:para></maml:para> </maml:description> </dev:type> <maml:description></maml:description> </command:returnValue> </command:returnValues> <command:terminatingErrors> </command:terminatingErrors> <command:nonTerminatingErrors> </command:nonTerminatingErrors> <maml:alertSet> <maml:title></maml:title> <maml:alert> <maml:para></maml:para> </maml:alert> </maml:alertSet> <command:examples> <command:example> <maml:title> -------------- Example 1 -------------- </maml:title> <maml:introduction> <maml:para>C:\PS></maml:para> C:\PS> </maml:introduction> <dev:code>Get-VDSwitch -Name "MyVDSwitch" | New-VDPortgroup -Name "MyVDPortGroup" -NumPorts 8 -VLanId 4</dev:code> <dev:remarks> <maml:para>Creates a new distributed port group on the specified vSphere distributed switch with the specified number of ports and VLAN ID.</maml:para> <maml:para></maml:para> <maml:para></maml:para> <maml:para> </maml:para> <maml:para></maml:para> </dev:remarks> <command:commandLines> <command:commandLine> <command:commandText> </command:commandText> </command:commandLine> </command:commandLines> </command:example> <command:example> <maml:title> -------------- Example 2 -------------- </maml:title> <maml:introduction> <maml:para>C:\PS></maml:para> C:\PS> </maml:introduction> <dev:code>$myReferncePortroup = Get-VDPortgroup -Name "MyReferencePortGroup" Get-VDSwitch -Name "MyVDSwitch" | New-VDPortgroup -Name "MyVDPortGroup" -ReferencePortgroup $myReferncePortroup</dev:code> <dev:remarks> <maml:para>Creates a new distributed port group on the specified vSphere distributed switch by cloning the configuration of the distributed port group named "MyReferencePortGroup".</maml:para> <maml:para></maml:para> <maml:para></maml:para> <maml:para> </maml:para> <maml:para></maml:para> </dev:remarks> <command:commandLines> <command:commandLine> <command:commandText> </command:commandText> </command:commandLine> </command:commandLines> </command:example> <command:example> <maml:title> -------------- Example 3 -------------- </maml:title> <maml:introduction> <maml:para>C:\PS></maml:para> C:\PS> </maml:introduction> <dev:code>Get-VDSwitch -Name "MyVDSwitch" | New-VDPortgroup -Name "MyVDPortGroup" -RunAsync</dev:code> <dev:remarks> <maml:para>Creates asynchronously a new distributed port group on the specified vSphere distributed switch.</maml:para> <maml:para></maml:para> <maml:para></maml:para> <maml:para> </maml:para> <maml:para></maml:para> </dev:remarks> <command:commandLines> <command:commandLine> <command:commandText> </command:commandText> </command:commandLine> </command:commandLines> </command:example> <command:example> <maml:title> -------------- Example 4 -------------- </maml:title> <maml:introduction> <maml:para>C:\PS></maml:para> C:\PS> </maml:introduction> <dev:code>$myBackupFilePath = 'c:\Backup.zip' Get-VDSwitch -Name "MyVDSwitch" | New-VDPortgroup -Name "MyVDPortgroup" -BakupPath $myBackupFilePath</dev:code> <dev:remarks> <maml:para>Creates a new distributed port group on the specified vSphere distributed switch by importing the specified backup profile.</maml:para> <maml:para></maml:para> <maml:para></maml:para> <maml:para> </maml:para> <maml:para></maml:para> </dev:remarks> <command:commandLines> <command:commandLine> <command:commandText> </command:commandText> </command:commandLine> </command:commandLines> </command:example> <command:example> <maml:title> -------------- Example 5 -------------- </maml:title> <maml:introduction> <maml:para>C:\PS></maml:para> C:\PS> </maml:introduction> <dev:code>Get-VDSwitch -Name "MyVDSwitch" | New-VDPortgroup -Name "MyVDPortGroup" -VlanTrunkRange "1-5, 10-20"</dev:code> <dev:remarks> <maml:para>Creates a new distributed port group on the specified vSphere distributed switch with the specified name and VLAN trunk range settings.</maml:para> <maml:para></maml:para> <maml:para></maml:para> <maml:para> </maml:para> <maml:para></maml:para> </dev:remarks> <command:commandLines> <command:commandLine> <command:commandText> </command:commandText> </command:commandLine> </command:commandLines> </command:example> </command:examples> <maml:relatedLinks> <maml:navigationLink> <maml:linkText>Online version:</maml:linkText> <maml:uri>https://code.vmware.com/doc/preview?id=6330#/doc/New-VDPortgroup.html</maml:uri> </maml:navigationLink> <maml:navigationLink> <maml:linkText>Get-VDPortgroup</maml:linkText> <maml:uri></maml:uri> </maml:navigationLink> <maml:navigationLink> <maml:linkText>Set-VDPortgroup</maml:linkText> <maml:uri></maml:uri> </maml:navigationLink> <maml:navigationLink> <maml:linkText>Remove-VDPortgroup</maml:linkText> <maml:uri></maml:uri> </maml:navigationLink> <maml:navigationLink> <maml:linkText>Export-VDPortgroup</maml:linkText> <maml:uri></maml:uri> </maml:navigationLink> </maml:relatedLinks> </command:command> <command:command xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10"> <command:details> <command:name>New-VDSwitch</command:name> <maml:description> <maml:para>This cmdlet creates vSphere distributed switches.</maml:para> </maml:description> <maml:copyright> <maml:para /> <!--Add copy right info here.--> </maml:copyright> <command:verb>New</command:verb> <command:noun>VDSwitch</command:noun> <!--Add Dev version info here.--> <dev:version /> </command:details> <maml:description> <!--This is the Description section--> <maml:para>This cmdlet creates vSphere distributed switches. You can create a new vSphere distributed switch with custom properties, specify a reference vSphere distributed switch to clone its configuration, or provide a backup profile to import the switch configuration. Note: Creating vSphere distributed switches from a reference switch or a backup profile requires vCenter Server 5.1 or later.</maml:para> </maml:description> <command:syntax> <command:syntaxItem> <maml:name>New-VDSwitch</maml:name> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>ContactDetails</maml:name> <maml:description> <maml:para>Specifies the contact details of the vSphere distributed switch administrator.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "false" >String</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>ContactName</maml:name> <maml:description> <maml:para>Specifies the name of the vSphere distributed switch administrator.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "false" >String</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>LinkDiscoveryProtocol</maml:name> <maml:description> <maml:para>Specifies the discovery protocol type of the vSphere distributed switch that you want to create. This parameter accepts CDP and LLDP values. If you do not set a value for this parameter, the default server setting is used.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "false" >LinkDiscoveryProtocol</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>LinkDiscoveryProtocolOperation</maml:name> <maml:description> <maml:para>Specifies the link discovery protocol operation for the vSphere distributed switch that you want to create. This parameter accepts Advertise, Listen, Both, and Disabled values. If you do not set a value for this parameter, the default server setting is used.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "false" >LinkDiscoveryOperation</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>MaxPorts</maml:name> <maml:description> <maml:para>Specifies the maximum number of ports allowed on the vSphere distributed switch that you want to create.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "false" >Int32</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>Mtu</maml:name> <maml:description> <maml:para>Specifies the maximum MTU size for the vSphere distributed switch that you want to create. Valid values are positive integers only.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "false" >Int32</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>Notes</maml:name> <maml:description> <maml:para>Specifies a description for the vSphere distributed switch that you want to create.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "false" >String</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>NumUplinkPorts</maml:name> <maml:description> <maml:para>Specifies the number of uplink ports on the vSphere distributed switch that you want to create.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "false" >Int32</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>Version</maml:name> <maml:description> <maml:para>Specifies the version of the vSphere distributed switch that you want to create. This parameter accepts 4.0, 4.1.0, 5.0.0, 5.1.0, 5.5.0, 6.0.0, and 6.5.0 values. You cannot specify a version that is incompatible with the version of the vCenter Server system you are connected to.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "false" >String</command:parameterValue> </command:parameter> <command:parameter required = "true" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>Name</maml:name> <maml:description> <maml:para>Specifies a name for the new vSphere distributed switch that you want to create. You cannot specify this parameter, when the KeepIdentifiers parameter is specified.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "false" >String</command:parameterValue> </command:parameter> <command:parameter required = "true" variableLength = "false" globbing = "true" pipelineInput = "false" position = "named" > <maml:name>Location</maml:name> <maml:description> <maml:para>Specifies the location where you want to create the vSphere distributed switch. This parameter accepts Datacenter and Folder objects. Note: You cannot create distributed port groups with identical names in the same location. If you want to import or clone a vSphere distributed switch with its distributed port groups, you need to specify a location that does not contain identically named distributed port groups.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "false" >VIContainer</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>RunAsync</maml:name> <maml:description> <maml:para>Indicates that the command returns immediately without waiting for the task to complete. In this mode, the output of the cmdlet is a Task object. For more information about the RunAsync parameter run "help About_RunAsync" in the VMware PowerCLI console.</maml:para> </maml:description> </command:parameter> <command:parameter required = "false" variableLength = "true" globbing = "true" pipelineInput = "false" position = "named" > <maml:name>Server</maml:name> <maml:description> <maml:para>Specifies the vCenter Server systems on which you want to run the cmdlet. If no value is given to this parameter, the command runs on the default servers. For more information about default servers, see the description of Connect-VIServer.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "true" >VIServer[]</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>WhatIf</maml:name> <maml:description> <maml:para>Indicates that the cmdlet is run only to display the changes that would be made and actually no objects are modified.</maml:para> </maml:description> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>Confirm</maml:name> <maml:description> <maml:para>If the value is $true, indicates that the cmdlet asks for confirmation before running. If the value is $false, the cmdlet runs without asking for user confirmation.</maml:para> </maml:description> </command:parameter> </command:syntaxItem> <command:syntaxItem> <maml:name>New-VDSwitch</maml:name> <command:parameter required = "true" variableLength = "false" globbing = "true" pipelineInput = "true (ByValue)" position = "named" > <maml:name>ReferenceVDSwitch</maml:name> <maml:description> <maml:para>Specifies a reference vSphere distributed switch. The properties of the new vSphere distributed switch will be cloned from the reference vSphere distributed switch. Note: This parameter is supported only on vSphere 5.1 and later.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "false" >VDSwitch</command:parameterValue> </command:parameter> <command:parameter required = "true" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>Name</maml:name> <maml:description> <maml:para>Specifies a name for the new vSphere distributed switch that you want to create. You cannot specify this parameter, when the KeepIdentifiers parameter is specified.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "false" >String</command:parameterValue> </command:parameter> <command:parameter required = "true" variableLength = "false" globbing = "true" pipelineInput = "false" position = "named" > <maml:name>Location</maml:name> <maml:description> <maml:para>Specifies the location where you want to create the vSphere distributed switch. This parameter accepts Datacenter and Folder objects. Note: You cannot create distributed port groups with identical names in the same location. If you want to import or clone a vSphere distributed switch with its distributed port groups, you need to specify a location that does not contain identically named distributed port groups.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "false" >VIContainer</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>WithoutPortGroups</maml:name> <maml:description> <maml:para>Indicates that the new vSphere distributed switch will be created without importing the port groups from the specified backup file or reference vSphere distributed switch.</maml:para> </maml:description> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>RunAsync</maml:name> <maml:description> <maml:para>Indicates that the command returns immediately without waiting for the task to complete. In this mode, the output of the cmdlet is a Task object. For more information about the RunAsync parameter run "help About_RunAsync" in the VMware PowerCLI console.</maml:para> </maml:description> </command:parameter> <command:parameter required = "false" variableLength = "true" globbing = "true" pipelineInput = "false" position = "named" > <maml:name>Server</maml:name> <maml:description> <maml:para>Specifies the vCenter Server systems on which you want to run the cmdlet. If no value is given to this parameter, the command runs on the default servers. For more information about default servers, see the description of Connect-VIServer.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "true" >VIServer[]</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>WhatIf</maml:name> <maml:description> <maml:para>Indicates that the cmdlet is run only to display the changes that would be made and actually no objects are modified.</maml:para> </maml:description> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>Confirm</maml:name> <maml:description> <maml:para>If the value is $true, indicates that the cmdlet asks for confirmation before running. If the value is $false, the cmdlet runs without asking for user confirmation.</maml:para> </maml:description> </command:parameter> </command:syntaxItem> <command:syntaxItem> <maml:name>New-VDSwitch</maml:name> <command:parameter required = "true" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>BackupPath</maml:name> <maml:description> <maml:para>Specifies the full file path to the .zip file containing the backup configuration that you want to import. Only .zip files created with the Export-VDSwitch cmdlet are supported. Note: This parameter is supported only on vSphere 5.1 and later.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "false" >String</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>KeepIdentifiers</maml:name> <maml:description> <maml:para>Indicates that the original vSphere distributed switch and port group identifiers will be preserved. You cannot specify this parameter, when the Name parameter is specified. Note: This parameter is supported only on vSphere 5.1 and later.</maml:para> </maml:description> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>Name</maml:name> <maml:description> <maml:para>Specifies a name for the new vSphere distributed switch that you want to create. You cannot specify this parameter, when the KeepIdentifiers parameter is specified.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "false" >String</command:parameterValue> </command:parameter> <command:parameter required = "true" variableLength = "false" globbing = "true" pipelineInput = "false" position = "named" > <maml:name>Location</maml:name> <maml:description> <maml:para>Specifies the location where you want to create the vSphere distributed switch. This parameter accepts Datacenter and Folder objects. Note: You cannot create distributed port groups with identical names in the same location. If you want to import or clone a vSphere distributed switch with its distributed port groups, you need to specify a location that does not contain identically named distributed port groups.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "false" >VIContainer</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>WithoutPortGroups</maml:name> <maml:description> <maml:para>Indicates that the new vSphere distributed switch will be created without importing the port groups from the specified backup file or reference vSphere distributed switch.</maml:para> </maml:description> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>RunAsync</maml:name> <maml:description> <maml:para>Indicates that the command returns immediately without waiting for the task to complete. In this mode, the output of the cmdlet is a Task object. For more information about the RunAsync parameter run "help About_RunAsync" in the VMware PowerCLI console.</maml:para> </maml:description> </command:parameter> <command:parameter required = "false" variableLength = "true" globbing = "true" pipelineInput = "false" position = "named" > <maml:name>Server</maml:name> <maml:description> <maml:para>Specifies the vCenter Server systems on which you want to run the cmdlet. If no value is given to this parameter, the command runs on the default servers. For more information about default servers, see the description of Connect-VIServer.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "true" >VIServer[]</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>WhatIf</maml:name> <maml:description> <maml:para>Indicates that the cmdlet is run only to display the changes that would be made and actually no objects are modified.</maml:para> </maml:description> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>Confirm</maml:name> <maml:description> <maml:para>If the value is $true, indicates that the cmdlet asks for confirmation before running. If the value is $false, the cmdlet runs without asking for user confirmation.</maml:para> </maml:description> </command:parameter> </command:syntaxItem> </command:syntax> <command:parameters> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>ContactDetails</maml:name> <maml:description> <maml:para>Specifies the contact details of the vSphere distributed switch administrator.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">String</command:parameterValue> <dev:type> <maml:name>String</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>ContactName</maml:name> <maml:description> <maml:para>Specifies the name of the vSphere distributed switch administrator.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">String</command:parameterValue> <dev:type> <maml:name>String</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>LinkDiscoveryProtocol</maml:name> <maml:description> <maml:para>Specifies the discovery protocol type of the vSphere distributed switch that you want to create. This parameter accepts CDP and LLDP values. If you do not set a value for this parameter, the default server setting is used.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">LinkDiscoveryProtocol</command:parameterValue> <dev:type> <maml:name>LinkDiscoveryProtocol</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>LinkDiscoveryProtocolOperation</maml:name> <maml:description> <maml:para>Specifies the link discovery protocol operation for the vSphere distributed switch that you want to create. This parameter accepts Advertise, Listen, Both, and Disabled values. If you do not set a value for this parameter, the default server setting is used.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">LinkDiscoveryOperation</command:parameterValue> <dev:type> <maml:name>LinkDiscoveryOperation</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>MaxPorts</maml:name> <maml:description> <maml:para>Specifies the maximum number of ports allowed on the vSphere distributed switch that you want to create.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">Int32</command:parameterValue> <dev:type> <maml:name>Int32</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>Mtu</maml:name> <maml:description> <maml:para>Specifies the maximum MTU size for the vSphere distributed switch that you want to create. Valid values are positive integers only.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">Int32</command:parameterValue> <dev:type> <maml:name>Int32</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>Notes</maml:name> <maml:description> <maml:para>Specifies a description for the vSphere distributed switch that you want to create.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">String</command:parameterValue> <dev:type> <maml:name>String</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>NumUplinkPorts</maml:name> <maml:description> <maml:para>Specifies the number of uplink ports on the vSphere distributed switch that you want to create.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">Int32</command:parameterValue> <dev:type> <maml:name>Int32</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>Version</maml:name> <maml:description> <maml:para>Specifies the version of the vSphere distributed switch that you want to create. This parameter accepts 4.0, 4.1.0, 5.0.0, 5.1.0, 5.5.0, 6.0.0, and 6.5.0 values. You cannot specify a version that is incompatible with the version of the vCenter Server system you are connected to.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">String</command:parameterValue> <dev:type> <maml:name>String</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="true" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>Name</maml:name> <maml:description> <maml:para>Specifies a name for the new vSphere distributed switch that you want to create. You cannot specify this parameter, when the KeepIdentifiers parameter is specified.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">String</command:parameterValue> <dev:type> <maml:name>String</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="true" variableLength="false" globbing="true" pipelineInput="false" position="named"> <maml:name>Location</maml:name> <maml:description> <maml:para>Specifies the location where you want to create the vSphere distributed switch. This parameter accepts Datacenter and Folder objects. Note: You cannot create distributed port groups with identical names in the same location. If you want to import or clone a vSphere distributed switch with its distributed port groups, you need to specify a location that does not contain identically named distributed port groups.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">VIContainer</command:parameterValue> <dev:type> <maml:name>VIContainer</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>RunAsync</maml:name> <maml:description> <maml:para>Indicates that the command returns immediately without waiting for the task to complete. In this mode, the output of the cmdlet is a Task object. For more information about the RunAsync parameter run "help About_RunAsync" in the VMware PowerCLI console.</maml:para> </maml:description> <dev:type> <maml:name>SwitchParameter</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="true" pipelineInput="false" position="named"> <maml:name>Server</maml:name> <maml:description> <maml:para>Specifies the vCenter Server systems on which you want to run the cmdlet. If no value is given to this parameter, the command runs on the default servers. For more information about default servers, see the description of Connect-VIServer.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="true">VIServer[]</command:parameterValue> <dev:type> <maml:name>VIServer[]</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>WhatIf</maml:name> <maml:description> <maml:para>Indicates that the cmdlet is run only to display the changes that would be made and actually no objects are modified.</maml:para> </maml:description> <dev:type> <maml:name>SwitchParameter</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>Confirm</maml:name> <maml:description> <maml:para>If the value is $true, indicates that the cmdlet asks for confirmation before running. If the value is $false, the cmdlet runs without asking for user confirmation.</maml:para> </maml:description> <dev:type> <maml:name>SwitchParameter</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="true" variableLength="false" globbing="true" pipelineInput="true (ByValue)" position="named"> <maml:name>ReferenceVDSwitch</maml:name> <maml:description> <maml:para>Specifies a reference vSphere distributed switch. The properties of the new vSphere distributed switch will be cloned from the reference vSphere distributed switch. Note: This parameter is supported only on vSphere 5.1 and later.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">VDSwitch</command:parameterValue> <dev:type> <maml:name>VDSwitch</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>WithoutPortGroups</maml:name> <maml:description> <maml:para>Indicates that the new vSphere distributed switch will be created without importing the port groups from the specified backup file or reference vSphere distributed switch.</maml:para> </maml:description> <dev:type> <maml:name>SwitchParameter</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="true" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>BackupPath</maml:name> <maml:description> <maml:para>Specifies the full file path to the .zip file containing the backup configuration that you want to import. Only .zip files created with the Export-VDSwitch cmdlet are supported. Note: This parameter is supported only on vSphere 5.1 and later.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">String</command:parameterValue> <dev:type> <maml:name>String</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>KeepIdentifiers</maml:name> <maml:description> <maml:para>Indicates that the original vSphere distributed switch and port group identifiers will be preserved. You cannot specify this parameter, when the Name parameter is specified. Note: This parameter is supported only on vSphere 5.1 and later.</maml:para> </maml:description> <dev:type> <maml:name>SwitchParameter</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> </command:parameters> <command:inputTypes> <command:inputType> <dev:type> <maml:name></maml:name> <maml:uri/> <maml:description> <maml:para></maml:para> </maml:description> </dev:type> <maml:description></maml:description> </command:inputType> </command:inputTypes> <command:returnValues> <command:returnValue> <dev:type> <maml:name>The newly created VDSwitch object</maml:name> <maml:uri /> <maml:description> <maml:para></maml:para> </maml:description> </dev:type> <maml:description></maml:description> </command:returnValue> </command:returnValues> <command:terminatingErrors> </command:terminatingErrors> <command:nonTerminatingErrors> </command:nonTerminatingErrors> <maml:alertSet> <maml:title></maml:title> <maml:alert> <maml:para></maml:para> </maml:alert> </maml:alertSet> <command:examples> <command:example> <maml:title> -------------- Example 1 -------------- </maml:title> <maml:introduction> <maml:para>C:\PS></maml:para> C:\PS> </maml:introduction> <dev:code>$myDatacenter = Get-Datacenter -Name "MyDatacenter" New-VDSwitch -Name "MyVDSwitch" -Location $myDatacenter -LinkDiscoveryProtocol "LLDP" -LinkDiscoveryProtocolOperation "Listen" -MaxPorts 256 -Version "5.0.0"</dev:code> <dev:remarks> <maml:para>Creates a new vSphere distributed switch with the specified name, version, maximum number of ports, and link discovery protocol settings in the specified datacenter.</maml:para> <maml:para></maml:para> <maml:para></maml:para> <maml:para> </maml:para> <maml:para></maml:para> </dev:remarks> <command:commandLines> <command:commandLine> <command:commandText> </command:commandText> </command:commandLine> </command:commandLines> </command:example> <command:example> <maml:title> -------------- Example 2 -------------- </maml:title> <maml:introduction> <maml:para>C:\PS></maml:para> C:\PS> </maml:introduction> <dev:code>$myFolder = Get-Folder -Name "MyFolder" Get-VDSwitch -Name "MyReferenceSwitch" | New-VDSwitch -Name "MyVDSwitch" -Location $myFolder -WithoutPortGroups</dev:code> <dev:remarks> <maml:para>Creates a new vSphere distributed switch by cloning the configuration of the existing vSphere distributed switch named "MyReferenceSwitch". The new vSphere distributed switch is created without cloning the existing port groups and is stored in the specified folder.</maml:para> <maml:para></maml:para> <maml:para></maml:para> <maml:para> </maml:para> <maml:para></maml:para> </dev:remarks> <command:commandLines> <command:commandLine> <command:commandText> </command:commandText> </command:commandLine> </command:commandLines> </command:example> <command:example> <maml:title> -------------- Example 3 -------------- </maml:title> <maml:introduction> <maml:para>C:\PS></maml:para> C:\PS> </maml:introduction> <dev:code>$myFolder = Get-Folder -Name "MyFolder" New-VDSwitch -Name "MyVDSwitch" -Location $myFolder -WithoutPortGroups -BackupPath "c:\MyDistributedSwitchProfile.zip"</dev:code> <dev:remarks> <maml:para>Creates a new vSphere distributed switch by importing the specified backup profile.</maml:para> <maml:para></maml:para> <maml:para></maml:para> <maml:para> </maml:para> <maml:para></maml:para> </dev:remarks> <command:commandLines> <command:commandLine> <command:commandText> </command:commandText> </command:commandLine> </command:commandLines> </command:example> </command:examples> <maml:relatedLinks> <maml:navigationLink> <maml:linkText>Online version:</maml:linkText> <maml:uri>https://code.vmware.com/doc/preview?id=6330#/doc/New-VDSwitch.html</maml:uri> </maml:navigationLink> <maml:navigationLink> <maml:linkText>Get-VDSwitch</maml:linkText> <maml:uri></maml:uri> </maml:navigationLink> <maml:navigationLink> <maml:linkText>Remove-VDSwitch</maml:linkText> <maml:uri></maml:uri> </maml:navigationLink> <maml:navigationLink> <maml:linkText>Set-VDSwitch</maml:linkText> <maml:uri></maml:uri> </maml:navigationLink> <maml:navigationLink> <maml:linkText>Export-VDSwitch</maml:linkText> <maml:uri></maml:uri> </maml:navigationLink> </maml:relatedLinks> </command:command> <command:command xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10"> <command:details> <command:name>New-VDSwitchPrivateVlan</command:name> <maml:description> <maml:para>This cmdlet creates private VLAN configuration entries on a vSphere distributed switch.</maml:para> </maml:description> <maml:copyright> <maml:para /> <!--Add copy right info here.--> </maml:copyright> <command:verb>New</command:verb> <command:noun>VDSwitchPrivateVlan</command:noun> <!--Add Dev version info here.--> <dev:version /> </command:details> <maml:description> <!--This is the Description section--> <maml:para>This cmdlet creates private VLAN configuration entries on a vSphere distributed switch.</maml:para> </maml:description> <command:syntax> <command:syntaxItem> <maml:name>New-VDSwitchPrivateVlan</maml:name> <command:parameter required = "true" variableLength = "false" globbing = "true" pipelineInput = "true (ByValue)" position = "1" > <maml:name>VDSwitch</maml:name> <maml:description> <maml:para>Specifies the vSphere distributed switch on which to create a private VLAN configuration.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "false" >VDSwitch</command:parameterValue> </command:parameter> <command:parameter required = "true" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>PrimaryVlanId</maml:name> <maml:description> <maml:para>Specifies the primary VLAN ID. The VLAN IDs of 0 and 4095 are reserved and cannot be used.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "false" >Int32</command:parameterValue> </command:parameter> <command:parameter required = "true" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>SecondaryVlanId</maml:name> <maml:description> <maml:para>Specifies the secondary VLAN ID. The VLAN IDs of 0 and 4095 are reserved and cannot be used.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "false" >Int32</command:parameterValue> </command:parameter> <command:parameter required = "true" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>PrivateVlanType</maml:name> <maml:description> <maml:para>Specifies the private VLAN port type: community, isolated, or promiscuous.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "false" >PrivateVlanType</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "true" globbing = "true" pipelineInput = "false" position = "named" > <maml:name>Server</maml:name> <maml:description> <maml:para>Specifies the vCenter Server systems on which you want to run the cmdlet. If no value is given to this parameter, the command runs on the default servers. For more information about default servers, see the description of Connect-VIServer.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "true" >VIServer[]</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>WhatIf</maml:name> <maml:description> <maml:para>Indicates that the cmdlet is run only to display the changes that would be made and actually no objects are modified.</maml:para> </maml:description> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>Confirm</maml:name> <maml:description> <maml:para>If the value is $true, indicates that the cmdlet asks for confirmation before running. If the value is $false, the cmdlet runs without asking for user confirmation.</maml:para> </maml:description> </command:parameter> </command:syntaxItem> </command:syntax> <command:parameters> <command:parameter required="true" variableLength="false" globbing="true" pipelineInput="true (ByValue)" position="1"> <maml:name>VDSwitch</maml:name> <maml:description> <maml:para>Specifies the vSphere distributed switch on which to create a private VLAN configuration.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">VDSwitch</command:parameterValue> <dev:type> <maml:name>VDSwitch</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="true" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>PrimaryVlanId</maml:name> <maml:description> <maml:para>Specifies the primary VLAN ID. The VLAN IDs of 0 and 4095 are reserved and cannot be used.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">Int32</command:parameterValue> <dev:type> <maml:name>Int32</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="true" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>SecondaryVlanId</maml:name> <maml:description> <maml:para>Specifies the secondary VLAN ID. The VLAN IDs of 0 and 4095 are reserved and cannot be used.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">Int32</command:parameterValue> <dev:type> <maml:name>Int32</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="true" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>PrivateVlanType</maml:name> <maml:description> <maml:para>Specifies the private VLAN port type: community, isolated, or promiscuous.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">PrivateVlanType</command:parameterValue> <dev:type> <maml:name>PrivateVlanType</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="true" pipelineInput="false" position="named"> <maml:name>Server</maml:name> <maml:description> <maml:para>Specifies the vCenter Server systems on which you want to run the cmdlet. If no value is given to this parameter, the command runs on the default servers. For more information about default servers, see the description of Connect-VIServer.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="true">VIServer[]</command:parameterValue> <dev:type> <maml:name>VIServer[]</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>WhatIf</maml:name> <maml:description> <maml:para>Indicates that the cmdlet is run only to display the changes that would be made and actually no objects are modified.</maml:para> </maml:description> <dev:type> <maml:name>SwitchParameter</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>Confirm</maml:name> <maml:description> <maml:para>If the value is $true, indicates that the cmdlet asks for confirmation before running. If the value is $false, the cmdlet runs without asking for user confirmation.</maml:para> </maml:description> <dev:type> <maml:name>SwitchParameter</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> </command:parameters> <command:inputTypes> <command:inputType> <dev:type> <maml:name></maml:name> <maml:uri/> <maml:description> <maml:para></maml:para> </maml:description> </dev:type> <maml:description></maml:description> </command:inputType> </command:inputTypes> <command:returnValues> <command:returnValue> <dev:type> <maml:name>The newly created VDSwitchPrivateVlan object</maml:name> <maml:uri /> <maml:description> <maml:para></maml:para> </maml:description> </dev:type> <maml:description></maml:description> </command:returnValue> </command:returnValues> <command:terminatingErrors> </command:terminatingErrors> <command:nonTerminatingErrors> </command:nonTerminatingErrors> <maml:alertSet> <maml:title></maml:title> <maml:alert> <maml:para></maml:para> </maml:alert> </maml:alertSet> <command:examples> <command:example> <maml:title> -------------- Example 1 -------------- </maml:title> <maml:introduction> <maml:para>C:\PS></maml:para> C:\PS> </maml:introduction> <dev:code>Get-VDSwitch "MyVDSwitch" | New-VDSwitchPrivateVlan -PrimaryVlanId 1 -SecondaryVlanId 1 -PrivateVlanType Promiscuous</dev:code> <dev:remarks> <maml:para>Creates a private VLAN inside a specific vSphere distributed switch with a promiscuous VLAN port type.</maml:para> <maml:para></maml:para> <maml:para></maml:para> <maml:para> </maml:para> <maml:para></maml:para> </dev:remarks> <command:commandLines> <command:commandLine> <command:commandText> </command:commandText> </command:commandLine> </command:commandLines> </command:example> </command:examples> <maml:relatedLinks> <maml:navigationLink> <maml:linkText>Online version:</maml:linkText> <maml:uri>https://code.vmware.com/doc/preview?id=6330#/doc/New-VDSwitchPrivateVlan.html</maml:uri> </maml:navigationLink> <maml:navigationLink> <maml:linkText>Get-VDSwitchPrivateVlan</maml:linkText> <maml:uri></maml:uri> </maml:navigationLink> <maml:navigationLink> <maml:linkText>Remove-VDSwitchPrivateVlan</maml:linkText> <maml:uri></maml:uri> </maml:navigationLink> </maml:relatedLinks> </command:command> <command:command xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10"> <command:details> <command:name>Remove-VDPortGroup</command:name> <maml:description> <maml:para>This cmdlet removes distributed port groups.</maml:para> </maml:description> <maml:copyright> <maml:para /> <!--Add copy right info here.--> </maml:copyright> <command:verb>Remove</command:verb> <command:noun>VDPortGroup</command:noun> <!--Add Dev version info here.--> <dev:version /> </command:details> <maml:description> <!--This is the Description section--> <maml:para>This cmdlet removes distributed port groups.</maml:para> </maml:description> <command:syntax> <command:syntaxItem> <maml:name>Remove-VDPortGroup</maml:name> <command:parameter required = "true" variableLength = "true" globbing = "true" pipelineInput = "true (ByValue)" position = "1" > <maml:name>VDPortGroup</maml:name> <maml:description> <maml:para>Specifies the distributed port group that you want to remove.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "true" >VDPortgroup[]</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>RunAsync</maml:name> <maml:description> <maml:para>Indicates that the command returns immediately without waiting for the task to complete. In this mode, the output of the cmdlet is a Task object. For more information about the RunAsync parameter run "help About_RunAsync" in the VMware PowerCLI console.</maml:para> </maml:description> </command:parameter> <command:parameter required = "false" variableLength = "true" globbing = "true" pipelineInput = "false" position = "named" > <maml:name>Server</maml:name> <maml:description> <maml:para>Specifies the vCenter Server systems on which you want to run the cmdlet. If no value is given to this parameter, the command runs on the default servers. For more information about default servers, see the description of Connect-VIServer.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "true" >VIServer[]</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>WhatIf</maml:name> <maml:description> <maml:para>Indicates that the cmdlet is run only to display the changes that would be made and actually no objects are modified.</maml:para> </maml:description> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>Confirm</maml:name> <maml:description> <maml:para>If the value is $true, indicates that the cmdlet asks for confirmation before running. If the value is $false, the cmdlet runs without asking for user confirmation.</maml:para> </maml:description> </command:parameter> </command:syntaxItem> </command:syntax> <command:parameters> <command:parameter required="true" variableLength="true" globbing="true" pipelineInput="true (ByValue)" position="1"> <maml:name>VDPortGroup</maml:name> <maml:description> <maml:para>Specifies the distributed port group that you want to remove.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="true">VDPortgroup[]</command:parameterValue> <dev:type> <maml:name>VDPortgroup[]</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>RunAsync</maml:name> <maml:description> <maml:para>Indicates that the command returns immediately without waiting for the task to complete. In this mode, the output of the cmdlet is a Task object. For more information about the RunAsync parameter run "help About_RunAsync" in the VMware PowerCLI console.</maml:para> </maml:description> <dev:type> <maml:name>SwitchParameter</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="true" pipelineInput="false" position="named"> <maml:name>Server</maml:name> <maml:description> <maml:para>Specifies the vCenter Server systems on which you want to run the cmdlet. If no value is given to this parameter, the command runs on the default servers. For more information about default servers, see the description of Connect-VIServer.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="true">VIServer[]</command:parameterValue> <dev:type> <maml:name>VIServer[]</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>WhatIf</maml:name> <maml:description> <maml:para>Indicates that the cmdlet is run only to display the changes that would be made and actually no objects are modified.</maml:para> </maml:description> <dev:type> <maml:name>SwitchParameter</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>Confirm</maml:name> <maml:description> <maml:para>If the value is $true, indicates that the cmdlet asks for confirmation before running. If the value is $false, the cmdlet runs without asking for user confirmation.</maml:para> </maml:description> <dev:type> <maml:name>SwitchParameter</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> </command:parameters> <command:inputTypes> <command:inputType> <dev:type> <maml:name></maml:name> <maml:uri/> <maml:description> <maml:para></maml:para> </maml:description> </dev:type> <maml:description></maml:description> </command:inputType> </command:inputTypes> <command:returnValues> <command:returnValue> <dev:type> <maml:name>None</maml:name> <maml:uri /> <maml:description> <maml:para></maml:para> </maml:description> </dev:type> <maml:description></maml:description> </command:returnValue> </command:returnValues> <command:terminatingErrors> </command:terminatingErrors> <command:nonTerminatingErrors> </command:nonTerminatingErrors> <maml:alertSet> <maml:title></maml:title> <maml:alert> <maml:para></maml:para> </maml:alert> </maml:alertSet> <command:examples> <command:example> <maml:title> -------------- Example 1 -------------- </maml:title> <maml:introduction> <maml:para>C:\PS></maml:para> C:\PS> </maml:introduction> <dev:code>Get-VDPortGroup -Name "MyVDPortGroup" | Remove-VDPortGroup</dev:code> <dev:remarks> <maml:para>Removes the specified distributed port group from the vSphere distributed switch that it belongs to.</maml:para> <maml:para></maml:para> <maml:para></maml:para> <maml:para> </maml:para> <maml:para></maml:para> </dev:remarks> <command:commandLines> <command:commandLine> <command:commandText> </command:commandText> </command:commandLine> </command:commandLines> </command:example> </command:examples> <maml:relatedLinks> <maml:navigationLink> <maml:linkText>Online version:</maml:linkText> <maml:uri>https://code.vmware.com/doc/preview?id=6330#/doc/Remove-VDPortgroup.html</maml:uri> </maml:navigationLink> <maml:navigationLink> <maml:linkText>New-VDPortgroup</maml:linkText> <maml:uri></maml:uri> </maml:navigationLink> <maml:navigationLink> <maml:linkText>Get-VDPortgroup</maml:linkText> <maml:uri></maml:uri> </maml:navigationLink> <maml:navigationLink> <maml:linkText>Set-VDPortgroup</maml:linkText> <maml:uri></maml:uri> </maml:navigationLink> <maml:navigationLink> <maml:linkText>Export-VDPortgroup</maml:linkText> <maml:uri></maml:uri> </maml:navigationLink> </maml:relatedLinks> </command:command> <command:command xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10"> <command:details> <command:name>Remove-VDSwitch</command:name> <maml:description> <maml:para>This cmdlet removes vSphere distributed switches.</maml:para> </maml:description> <maml:copyright> <maml:para /> <!--Add copy right info here.--> </maml:copyright> <command:verb>Remove</command:verb> <command:noun>VDSwitch</command:noun> <!--Add Dev version info here.--> <dev:version /> </command:details> <maml:description> <!--This is the Description section--> <maml:para>This cmdlet removes vSphere distributed switches.</maml:para> </maml:description> <command:syntax> <command:syntaxItem> <maml:name>Remove-VDSwitch</maml:name> <command:parameter required = "true" variableLength = "true" globbing = "true" pipelineInput = "true (ByValue)" position = "1" > <maml:name>VDSwitch</maml:name> <maml:description> <maml:para>Specifies the vSphere distributed switches that you want to remove.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "true" >VDSwitch[]</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>RunAsync</maml:name> <maml:description> <maml:para>Indicates that the command returns immediately without waiting for the task to complete. In this mode, the output of the cmdlet is a Task object. For more information about the RunAsync parameter run "help About_RunAsync" in the VMware PowerCLI console.</maml:para> </maml:description> </command:parameter> <command:parameter required = "false" variableLength = "true" globbing = "true" pipelineInput = "false" position = "named" > <maml:name>Server</maml:name> <maml:description> <maml:para>Specifies the vCenter Server systems on which you want to run the cmdlet. If no value is given to this parameter, the command runs on the default servers. For more information about default servers, see the description of Connect-VIServer.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "true" >VIServer[]</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>WhatIf</maml:name> <maml:description> <maml:para>Indicates that the cmdlet is run only to display the changes that would be made and actually no objects are modified.</maml:para> </maml:description> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>Confirm</maml:name> <maml:description> <maml:para>If the value is $true, indicates that the cmdlet asks for confirmation before running. If the value is $false, the cmdlet runs without asking for user confirmation.</maml:para> </maml:description> </command:parameter> </command:syntaxItem> </command:syntax> <command:parameters> <command:parameter required="true" variableLength="true" globbing="true" pipelineInput="true (ByValue)" position="1"> <maml:name>VDSwitch</maml:name> <maml:description> <maml:para>Specifies the vSphere distributed switches that you want to remove.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="true">VDSwitch[]</command:parameterValue> <dev:type> <maml:name>VDSwitch[]</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>RunAsync</maml:name> <maml:description> <maml:para>Indicates that the command returns immediately without waiting for the task to complete. In this mode, the output of the cmdlet is a Task object. For more information about the RunAsync parameter run "help About_RunAsync" in the VMware PowerCLI console.</maml:para> </maml:description> <dev:type> <maml:name>SwitchParameter</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="true" pipelineInput="false" position="named"> <maml:name>Server</maml:name> <maml:description> <maml:para>Specifies the vCenter Server systems on which you want to run the cmdlet. If no value is given to this parameter, the command runs on the default servers. For more information about default servers, see the description of Connect-VIServer.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="true">VIServer[]</command:parameterValue> <dev:type> <maml:name>VIServer[]</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>WhatIf</maml:name> <maml:description> <maml:para>Indicates that the cmdlet is run only to display the changes that would be made and actually no objects are modified.</maml:para> </maml:description> <dev:type> <maml:name>SwitchParameter</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>Confirm</maml:name> <maml:description> <maml:para>If the value is $true, indicates that the cmdlet asks for confirmation before running. If the value is $false, the cmdlet runs without asking for user confirmation.</maml:para> </maml:description> <dev:type> <maml:name>SwitchParameter</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> </command:parameters> <command:inputTypes> <command:inputType> <dev:type> <maml:name></maml:name> <maml:uri/> <maml:description> <maml:para></maml:para> </maml:description> </dev:type> <maml:description></maml:description> </command:inputType> </command:inputTypes> <command:returnValues> <command:returnValue> <dev:type> <maml:name>None</maml:name> <maml:uri /> <maml:description> <maml:para></maml:para> </maml:description> </dev:type> <maml:description></maml:description> </command:returnValue> </command:returnValues> <command:terminatingErrors> </command:terminatingErrors> <command:nonTerminatingErrors> </command:nonTerminatingErrors> <maml:alertSet> <maml:title></maml:title> <maml:alert> <maml:para></maml:para> </maml:alert> </maml:alertSet> <command:examples> <command:example> <maml:title> -------------- Example 1 -------------- </maml:title> <maml:introduction> <maml:para>C:\PS></maml:para> C:\PS> </maml:introduction> <dev:code>Get-VDSwitch -Name MyVDSwitch | Remove-VDSwitch</dev:code> <dev:remarks> <maml:para>Removes the specified vSphere distributed switch.</maml:para> <maml:para></maml:para> <maml:para></maml:para> <maml:para> </maml:para> <maml:para></maml:para> </dev:remarks> <command:commandLines> <command:commandLine> <command:commandText> </command:commandText> </command:commandLine> </command:commandLines> </command:example> </command:examples> <maml:relatedLinks> <maml:navigationLink> <maml:linkText>Online version:</maml:linkText> <maml:uri>https://code.vmware.com/doc/preview?id=6330#/doc/Remove-VDSwitch.html</maml:uri> </maml:navigationLink> <maml:navigationLink> <maml:linkText>Get-VDSwitch</maml:linkText> <maml:uri></maml:uri> </maml:navigationLink> <maml:navigationLink> <maml:linkText>New-VDSwitch</maml:linkText> <maml:uri></maml:uri> </maml:navigationLink> <maml:navigationLink> <maml:linkText>Export-VDSwitch</maml:linkText> <maml:uri></maml:uri> </maml:navigationLink> <maml:navigationLink> <maml:linkText>Set-VDSwitch</maml:linkText> <maml:uri></maml:uri> </maml:navigationLink> </maml:relatedLinks> </command:command> <command:command xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10"> <command:details> <command:name>Remove-VDSwitchPhysicalNetworkAdapter</command:name> <maml:description> <maml:para>This cmdlet removes host physical network adapters from the vSphere distributed switches they are connected to.</maml:para> </maml:description> <maml:copyright> <maml:para /> <!--Add copy right info here.--> </maml:copyright> <command:verb>Remove</command:verb> <command:noun>VDSwitchPhysicalNetworkAdapter</command:noun> <!--Add Dev version info here.--> <dev:version /> </command:details> <maml:description> <!--This is the Description section--> <maml:para>This cmdlet removes host physical network adapters from the vSphere distributed switches they are connected to.</maml:para> </maml:description> <command:syntax> <command:syntaxItem> <maml:name>Remove-VDSwitchPhysicalNetworkAdapter</maml:name> <command:parameter required = "true" variableLength = "true" globbing = "false" pipelineInput = "true (ByValue)" position = "1" > <maml:name>VMHostNetworkAdapter</maml:name> <maml:description> <maml:para>Specifies the host physical network adapters that you want to remove from the vSphere distributed switch it is connected to.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "true" >PhysicalNic[]</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>WhatIf</maml:name> <maml:description> <maml:para>Indicates that the cmdlet is run only to display the changes that would be made and actually no objects are modified.</maml:para> </maml:description> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>Confirm</maml:name> <maml:description> <maml:para>If the value is $true, indicates that the cmdlet asks for confirmation before running. If the value is $false, the cmdlet runs without asking for user confirmation.</maml:para> </maml:description> </command:parameter> </command:syntaxItem> </command:syntax> <command:parameters> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="true (ByValue)" position="1"> <maml:name>VMHostNetworkAdapter</maml:name> <maml:description> <maml:para>Specifies the host physical network adapters that you want to remove from the vSphere distributed switch it is connected to.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="true">PhysicalNic[]</command:parameterValue> <dev:type> <maml:name>PhysicalNic[]</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>WhatIf</maml:name> <maml:description> <maml:para>Indicates that the cmdlet is run only to display the changes that would be made and actually no objects are modified.</maml:para> </maml:description> <dev:type> <maml:name>SwitchParameter</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>Confirm</maml:name> <maml:description> <maml:para>If the value is $true, indicates that the cmdlet asks for confirmation before running. If the value is $false, the cmdlet runs without asking for user confirmation.</maml:para> </maml:description> <dev:type> <maml:name>SwitchParameter</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> </command:parameters> <command:inputTypes> <command:inputType> <dev:type> <maml:name></maml:name> <maml:uri/> <maml:description> <maml:para></maml:para> </maml:description> </dev:type> <maml:description></maml:description> </command:inputType> </command:inputTypes> <command:returnValues> <command:returnValue> <dev:type> <maml:name>None</maml:name> <maml:uri /> <maml:description> <maml:para></maml:para> </maml:description> </dev:type> <maml:description></maml:description> </command:returnValue> </command:returnValues> <command:terminatingErrors> </command:terminatingErrors> <command:nonTerminatingErrors> </command:nonTerminatingErrors> <maml:alertSet> <maml:title></maml:title> <maml:alert> <maml:para></maml:para> </maml:alert> </maml:alertSet> <command:examples> <command:example> <maml:title> -------------- Example 1 -------------- </maml:title> <maml:introduction> <maml:para>C:\PS></maml:para> C:\PS> </maml:introduction> <dev:code>Get-VMhost -Name "MyVMhost" | Get-VMHostNetworkAdapter -Physical -Name vmnic0 | Remove-VDSwitchPhysicalNetworkAdapter</dev:code> <dev:remarks> <maml:para>Removes the specified host physical network adapter from the vSphere distributed switch that it is connected to.</maml:para> <maml:para></maml:para> <maml:para></maml:para> <maml:para> </maml:para> <maml:para></maml:para> </dev:remarks> <command:commandLines> <command:commandLine> <command:commandText> </command:commandText> </command:commandLine> </command:commandLines> </command:example> </command:examples> <maml:relatedLinks> <maml:navigationLink> <maml:linkText>Online version:</maml:linkText> <maml:uri>https://code.vmware.com/doc/preview?id=6330#/doc/Remove-VDSwitchPhysicalNetworkAdapter.html</maml:uri> </maml:navigationLink> <maml:navigationLink> <maml:linkText>Add-VDSwitchPhysicalNetworkAdapter</maml:linkText> <maml:uri></maml:uri> </maml:navigationLink> </maml:relatedLinks> </command:command> <command:command xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10"> <command:details> <command:name>Remove-VDSwitchPrivateVlan</command:name> <maml:description> <maml:para>This cmdlet removes private VLAN configuration entries from vSphere distributed switches.</maml:para> </maml:description> <maml:copyright> <maml:para /> <!--Add copy right info here.--> </maml:copyright> <command:verb>Remove</command:verb> <command:noun>VDSwitchPrivateVlan</command:noun> <!--Add Dev version info here.--> <dev:version /> </command:details> <maml:description> <!--This is the Description section--> <maml:para>This cmdlet removes private VLAN configuration entries from vSphere distributed switches.</maml:para> </maml:description> <command:syntax> <command:syntaxItem> <maml:name>Remove-VDSwitchPrivateVlan</maml:name> <command:parameter required = "true" variableLength = "true" globbing = "false" pipelineInput = "true (ByValue)" position = "1" > <maml:name>VDSwitchPrivateVlan</maml:name> <maml:description> <maml:para>Specifies the private VLAN configuration entry that you want to remove.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "true" >VDSwitchPrivateVlan[]</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>WhatIf</maml:name> <maml:description> <maml:para>Indicates that the cmdlet is run only to display the changes that would be made and actually no objects are modified.</maml:para> </maml:description> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>Confirm</maml:name> <maml:description> <maml:para>If the value is $true, indicates that the cmdlet asks for confirmation before running. If the value is $false, the cmdlet runs without asking for user confirmation.</maml:para> </maml:description> </command:parameter> </command:syntaxItem> </command:syntax> <command:parameters> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="true (ByValue)" position="1"> <maml:name>VDSwitchPrivateVlan</maml:name> <maml:description> <maml:para>Specifies the private VLAN configuration entry that you want to remove.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="true">VDSwitchPrivateVlan[]</command:parameterValue> <dev:type> <maml:name>VDSwitchPrivateVlan[]</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>WhatIf</maml:name> <maml:description> <maml:para>Indicates that the cmdlet is run only to display the changes that would be made and actually no objects are modified.</maml:para> </maml:description> <dev:type> <maml:name>SwitchParameter</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>Confirm</maml:name> <maml:description> <maml:para>If the value is $true, indicates that the cmdlet asks for confirmation before running. If the value is $false, the cmdlet runs without asking for user confirmation.</maml:para> </maml:description> <dev:type> <maml:name>SwitchParameter</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> </command:parameters> <command:inputTypes> <command:inputType> <dev:type> <maml:name></maml:name> <maml:uri/> <maml:description> <maml:para></maml:para> </maml:description> </dev:type> <maml:description></maml:description> </command:inputType> </command:inputTypes> <command:returnValues> <command:returnValue> <dev:type> <maml:name>None</maml:name> <maml:uri /> <maml:description> <maml:para></maml:para> </maml:description> </dev:type> <maml:description></maml:description> </command:returnValue> </command:returnValues> <command:terminatingErrors> </command:terminatingErrors> <command:nonTerminatingErrors> </command:nonTerminatingErrors> <maml:alertSet> <maml:title></maml:title> <maml:alert> <maml:para></maml:para> </maml:alert> </maml:alertSet> <command:examples> <command:example> <maml:title> -------------- Example 1 -------------- </maml:title> <maml:introduction> <maml:para>C:\PS></maml:para> C:\PS> </maml:introduction> <dev:code>Get-VDSwitchPrivateVlan -VDSwitch "MyVDSwitch" -PrimaryVlanId 1,3,5 | Remove-VDSwitchPrivateVlan</dev:code> <dev:remarks> <maml:para>Removes the private VLAN configuration entries with specified primary identities from a vSphere distributed switch named "MyVDSwitch".</maml:para> <maml:para></maml:para> <maml:para></maml:para> <maml:para> </maml:para> <maml:para></maml:para> </dev:remarks> <command:commandLines> <command:commandLine> <command:commandText> </command:commandText> </command:commandLine> </command:commandLines> </command:example> </command:examples> <maml:relatedLinks> <maml:navigationLink> <maml:linkText>Online version:</maml:linkText> <maml:uri>https://code.vmware.com/doc/preview?id=6330#/doc/Remove-VDSwitchPrivateVlan.html</maml:uri> </maml:navigationLink> <maml:navigationLink> <maml:linkText>Get-VDSwitchPrivateVlan</maml:linkText> <maml:uri></maml:uri> </maml:navigationLink> <maml:navigationLink> <maml:linkText>New-VDSwitchPrivateVlan</maml:linkText> <maml:uri></maml:uri> </maml:navigationLink> </maml:relatedLinks> </command:command> <command:command xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10"> <command:details> <command:name>Remove-VDSwitchVMHost</command:name> <maml:description> <maml:para>This cmdlet removes hosts from the specified vSphere distributed switches.</maml:para> </maml:description> <maml:copyright> <maml:para /> <!--Add copy right info here.--> </maml:copyright> <command:verb>Remove</command:verb> <command:noun>VDSwitchVMHost</command:noun> <!--Add Dev version info here.--> <dev:version /> </command:details> <maml:description> <!--This is the Description section--> <maml:para>This cmdlet removes hosts from the specified vSphere distributed switches.</maml:para> </maml:description> <command:syntax> <command:syntaxItem> <maml:name>Remove-VDSwitchVMHost</maml:name> <command:parameter required = "true" variableLength = "false" globbing = "true" pipelineInput = "true (ByValue)" position = "named" > <maml:name>VDSwitch</maml:name> <maml:description> <maml:para>Specifies the vSphere distributed switch from which you want to remove hosts.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "false" >VDSwitch</command:parameterValue> </command:parameter> <command:parameter required = "true" variableLength = "true" globbing = "true" pipelineInput = "false" position = "named" > <maml:name>VMHost</maml:name> <maml:description> <maml:para>Specifies the hosts that you want to remove.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "true" >VMHost[]</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "true" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>Server</maml:name> <maml:description> <maml:para>Specifies the vCenter Server systems on which you want to run the cmdlet. If no value is given to this parameter, the command runs on the default servers. For more information about default servers, see the description of Connect-VIServer.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "true" >VIServer[]</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>RunAsync</maml:name> <maml:description> <maml:para>Indicates that the command returns immediately without waiting for the task to complete. In this mode, the output of the cmdlet is a Task object. For more information about the RunAsync parameter run "help About_RunAsync" in the VMware PowerCLI console.</maml:para> </maml:description> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>WhatIf</maml:name> <maml:description> <maml:para>Indicates that the cmdlet is run only to display the changes that would be made and actually no objects are modified.</maml:para> </maml:description> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>Confirm</maml:name> <maml:description> <maml:para>If the value is $true, indicates that the cmdlet asks for confirmation before running. If the value is $false, the cmdlet runs without asking for user confirmation.</maml:para> </maml:description> </command:parameter> </command:syntaxItem> </command:syntax> <command:parameters> <command:parameter required="true" variableLength="false" globbing="true" pipelineInput="true (ByValue)" position="named"> <maml:name>VDSwitch</maml:name> <maml:description> <maml:para>Specifies the vSphere distributed switch from which you want to remove hosts.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">VDSwitch</command:parameterValue> <dev:type> <maml:name>VDSwitch</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="true" variableLength="true" globbing="true" pipelineInput="false" position="named"> <maml:name>VMHost</maml:name> <maml:description> <maml:para>Specifies the hosts that you want to remove.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="true">VMHost[]</command:parameterValue> <dev:type> <maml:name>VMHost[]</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="false" position="named"> <maml:name>Server</maml:name> <maml:description> <maml:para>Specifies the vCenter Server systems on which you want to run the cmdlet. If no value is given to this parameter, the command runs on the default servers. For more information about default servers, see the description of Connect-VIServer.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="true">VIServer[]</command:parameterValue> <dev:type> <maml:name>VIServer[]</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>RunAsync</maml:name> <maml:description> <maml:para>Indicates that the command returns immediately without waiting for the task to complete. In this mode, the output of the cmdlet is a Task object. For more information about the RunAsync parameter run "help About_RunAsync" in the VMware PowerCLI console.</maml:para> </maml:description> <dev:type> <maml:name>SwitchParameter</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>WhatIf</maml:name> <maml:description> <maml:para>Indicates that the cmdlet is run only to display the changes that would be made and actually no objects are modified.</maml:para> </maml:description> <dev:type> <maml:name>SwitchParameter</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>Confirm</maml:name> <maml:description> <maml:para>If the value is $true, indicates that the cmdlet asks for confirmation before running. If the value is $false, the cmdlet runs without asking for user confirmation.</maml:para> </maml:description> <dev:type> <maml:name>SwitchParameter</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> </command:parameters> <command:inputTypes> <command:inputType> <dev:type> <maml:name></maml:name> <maml:uri/> <maml:description> <maml:para></maml:para> </maml:description> </dev:type> <maml:description></maml:description> </command:inputType> </command:inputTypes> <command:returnValues> <command:returnValue> <dev:type> <maml:name>None</maml:name> <maml:uri /> <maml:description> <maml:para></maml:para> </maml:description> </dev:type> <maml:description></maml:description> </command:returnValue> </command:returnValues> <command:terminatingErrors> </command:terminatingErrors> <command:nonTerminatingErrors> </command:nonTerminatingErrors> <maml:alertSet> <maml:title></maml:title> <maml:alert> <maml:para></maml:para> </maml:alert> </maml:alertSet> <command:examples> <command:example> <maml:title> -------------- Example 1 -------------- </maml:title> <maml:introduction> <maml:para>C:\PS></maml:para> C:\PS> </maml:introduction> <dev:code>Get-VDSwitch -Name "MySwitch" | Remove-VDSwitchVMHost -VMHost "VMHost1", "VMHost2"</dev:code> <dev:remarks> <maml:para>Removes two hosts from the specified vSphere distributed switch.</maml:para> <maml:para></maml:para> <maml:para></maml:para> <maml:para> </maml:para> <maml:para></maml:para> </dev:remarks> <command:commandLines> <command:commandLine> <command:commandText> </command:commandText> </command:commandLine> </command:commandLines> </command:example> </command:examples> <maml:relatedLinks> <maml:navigationLink> <maml:linkText>Online version:</maml:linkText> <maml:uri>https://code.vmware.com/doc/preview?id=6330#/doc/Remove-VDSwitchVMHost.html</maml:uri> </maml:navigationLink> <maml:navigationLink> <maml:linkText>Add-VDSwitchVMHost</maml:linkText> <maml:uri></maml:uri> </maml:navigationLink> </maml:relatedLinks> </command:command> <command:command xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10"> <command:details> <command:name>Set-VDBlockedPolicy</command:name> <maml:description> <maml:para>This cmdlet modifies the blocking policy for distributed ports.</maml:para> </maml:description> <maml:copyright> <maml:para /> <!--Add copy right info here.--> </maml:copyright> <command:verb>Set</command:verb> <command:noun>VDBlockedPolicy</command:noun> <!--Add Dev version info here.--> <dev:version /> </command:details> <maml:description> <!--This is the Description section--> <maml:para>This cmdlet modifies the blocking policy for distributed ports at switch, port group, or port level (depending on the input policy).</maml:para> </maml:description> <command:syntax> <command:syntaxItem> <maml:name>Set-VDBlockedPolicy</maml:name> <command:parameter required = "true" variableLength = "true" globbing = "false" pipelineInput = "true (ByValue)" position = "2" > <maml:name>Policy</maml:name> <maml:description> <maml:para>Specifies the blocking policy that you want to configure.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "true" >BlockedPolicy[]</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>Blocked</maml:name> <maml:description> <maml:para>Specifies whether packet forwarding is stopped for the corresponding distributed port, port group, or switch.</maml:para> </maml:description> <command:parameterValue required="false" variableLength = "false" >Boolean</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>BlockedInherited</maml:name> <maml:description> <maml:para>Specifies whether the Blocked setting is inherited from a parent object, such as a distributed port group or switch.</maml:para> </maml:description> <command:parameterValue required="false" variableLength = "false" >Boolean</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>WhatIf</maml:name> <maml:description> <maml:para>Indicates that the cmdlet is run only to display the changes that would be made and actually no objects are modified.</maml:para> </maml:description> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>Confirm</maml:name> <maml:description> <maml:para>If the value is $true, indicates that the cmdlet asks for confirmation before running. If the value is $false, the cmdlet runs without asking for user confirmation.</maml:para> </maml:description> </command:parameter> </command:syntaxItem> </command:syntax> <command:parameters> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="true (ByValue)" position="2"> <maml:name>Policy</maml:name> <maml:description> <maml:para>Specifies the blocking policy that you want to configure.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="true">BlockedPolicy[]</command:parameterValue> <dev:type> <maml:name>BlockedPolicy[]</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>Blocked</maml:name> <maml:description> <maml:para>Specifies whether packet forwarding is stopped for the corresponding distributed port, port group, or switch.</maml:para> </maml:description> <command:parameterValue required="false" variableLength="false">Boolean</command:parameterValue> <dev:type> <maml:name>Boolean</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>BlockedInherited</maml:name> <maml:description> <maml:para>Specifies whether the Blocked setting is inherited from a parent object, such as a distributed port group or switch.</maml:para> </maml:description> <command:parameterValue required="false" variableLength="false">Boolean</command:parameterValue> <dev:type> <maml:name>Boolean</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>WhatIf</maml:name> <maml:description> <maml:para>Indicates that the cmdlet is run only to display the changes that would be made and actually no objects are modified.</maml:para> </maml:description> <dev:type> <maml:name>SwitchParameter</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>Confirm</maml:name> <maml:description> <maml:para>If the value is $true, indicates that the cmdlet asks for confirmation before running. If the value is $false, the cmdlet runs without asking for user confirmation.</maml:para> </maml:description> <dev:type> <maml:name>SwitchParameter</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> </command:parameters> <command:inputTypes> <command:inputType> <dev:type> <maml:name></maml:name> <maml:uri/> <maml:description> <maml:para></maml:para> </maml:description> </dev:type> <maml:description></maml:description> </command:inputType> </command:inputTypes> <command:returnValues> <command:returnValue> <dev:type> <maml:name>The modified BlockedPolicy objects</maml:name> <maml:uri /> <maml:description> <maml:para></maml:para> </maml:description> </dev:type> <maml:description></maml:description> </command:returnValue> </command:returnValues> <command:terminatingErrors> </command:terminatingErrors> <command:nonTerminatingErrors> </command:nonTerminatingErrors> <maml:alertSet> <maml:title></maml:title> <maml:alert> <maml:para></maml:para> </maml:alert> </maml:alertSet> <command:examples> <command:example> <maml:title> -------------- Example 1 -------------- </maml:title> <maml:introduction> <maml:para>C:\PS></maml:para> C:\PS> </maml:introduction> <dev:code>Get-VDPort -VDSwitch "MyVDSwitch" -ActiveOnly | Get-VDBlockedPolicy | Set-VDBlockedPolicy -Blocked</dev:code> <dev:remarks> <maml:para>Retrieves all active distributed ports and updates their blocking policy to stop packet forwarding through them.</maml:para> <maml:para></maml:para> <maml:para></maml:para> <maml:para> </maml:para> <maml:para></maml:para> </dev:remarks> <command:commandLines> <command:commandLine> <command:commandText> </command:commandText> </command:commandLine> </command:commandLines> </command:example> <command:example> <maml:title> -------------- Example 2 -------------- </maml:title> <maml:introduction> <maml:para>C:\PS></maml:para> C:\PS> </maml:introduction> <dev:code>Get-VDportgroup "MyVDPortgroup" | Get-VDPort | Get-VDBlockedPolicy | Set-VDBlockedPolicy -BlockedInherited</dev:code> <dev:remarks> <maml:para>Retrieves the specified "MyVDPortgroup" distributed port group and updates the blocking policy of all ports inside the group to inherit the setting for packet forwarding from the one set on the distributed port group level.</maml:para> <maml:para></maml:para> <maml:para></maml:para> <maml:para> </maml:para> <maml:para></maml:para> </dev:remarks> <command:commandLines> <command:commandLine> <command:commandText> </command:commandText> </command:commandLine> </command:commandLines> </command:example> </command:examples> <maml:relatedLinks> <maml:navigationLink> <maml:linkText>Online version:</maml:linkText> <maml:uri>https://code.vmware.com/doc/preview?id=6330#/doc/Set-VDBlockedPolicy.html</maml:uri> </maml:navigationLink> <maml:navigationLink> <maml:linkText>Get-VDBlockedPolicy</maml:linkText> <maml:uri></maml:uri> </maml:navigationLink> </maml:relatedLinks> </command:command> <command:command xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10"> <command:details> <command:name>Set-VDPort</command:name> <maml:description> <maml:para>This cmdlet modifies the configuration of virtual distributed ports.</maml:para> </maml:description> <maml:copyright> <maml:para /> <!--Add copy right info here.--> </maml:copyright> <command:verb>Set</command:verb> <command:noun>VDPort</command:noun> <!--Add Dev version info here.--> <dev:version /> </command:details> <maml:description> <!--This is the Description section--> <maml:para>This cmdlet modifies the configuration of virtual distributed ports.</maml:para> </maml:description> <command:syntax> <command:syntaxItem> <maml:name>Set-VDPort</maml:name> <command:parameter required = "true" variableLength = "true" globbing = "false" pipelineInput = "true (ByValue)" position = "2" > <maml:name>VDPort</maml:name> <maml:description> <maml:para>Specifies the virtual distributed port that you want to configure.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "true" >VDPort[]</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>Name</maml:name> <maml:description> <maml:para>Specifies a new name for the virtual distributed port that you want to configure.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "false" >String</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>Description</maml:name> <maml:description> <maml:para>Specifies a description for the virtual distributed port that you want to configure.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "false" >String</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>WhatIf</maml:name> <maml:description> <maml:para>Indicates that the cmdlet is run only to display the changes that would be made and actually no objects are modified.</maml:para> </maml:description> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>Confirm</maml:name> <maml:description> <maml:para>If the value is $true, indicates that the cmdlet asks for confirmation before running. If the value is $false, the cmdlet runs without asking for user confirmation.</maml:para> </maml:description> </command:parameter> </command:syntaxItem> </command:syntax> <command:parameters> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="true (ByValue)" position="2"> <maml:name>VDPort</maml:name> <maml:description> <maml:para>Specifies the virtual distributed port that you want to configure.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="true">VDPort[]</command:parameterValue> <dev:type> <maml:name>VDPort[]</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>Name</maml:name> <maml:description> <maml:para>Specifies a new name for the virtual distributed port that you want to configure.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">String</command:parameterValue> <dev:type> <maml:name>String</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>Description</maml:name> <maml:description> <maml:para>Specifies a description for the virtual distributed port that you want to configure.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">String</command:parameterValue> <dev:type> <maml:name>String</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>WhatIf</maml:name> <maml:description> <maml:para>Indicates that the cmdlet is run only to display the changes that would be made and actually no objects are modified.</maml:para> </maml:description> <dev:type> <maml:name>SwitchParameter</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>Confirm</maml:name> <maml:description> <maml:para>If the value is $true, indicates that the cmdlet asks for confirmation before running. If the value is $false, the cmdlet runs without asking for user confirmation.</maml:para> </maml:description> <dev:type> <maml:name>SwitchParameter</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> </command:parameters> <command:inputTypes> <command:inputType> <dev:type> <maml:name></maml:name> <maml:uri/> <maml:description> <maml:para></maml:para> </maml:description> </dev:type> <maml:description></maml:description> </command:inputType> </command:inputTypes> <command:returnValues> <command:returnValue> <dev:type> <maml:name>The modified VDPort objects</maml:name> <maml:uri /> <maml:description> <maml:para></maml:para> </maml:description> </dev:type> <maml:description></maml:description> </command:returnValue> </command:returnValues> <command:terminatingErrors> </command:terminatingErrors> <command:nonTerminatingErrors> </command:nonTerminatingErrors> <maml:alertSet> <maml:title></maml:title> <maml:alert> <maml:para></maml:para> </maml:alert> </maml:alertSet> <command:examples> <command:example> <maml:title> -------------- Example 1 -------------- </maml:title> <maml:introduction> <maml:para>C:\PS></maml:para> C:\PS> </maml:introduction> <dev:code>$myVDPort = Get-VDPort -Key "Port0" -VDSwtich "MyVDSwitch" Set-VDPort -VDPort $myVDPort -Name "MyUpdatedPortName" -Description "MyUpdatedVDPortDescription"</dev:code> <dev:remarks> <maml:para>Updates the name and the description of a specified virtual distributed port inside a vSphere distributed switch named "MyVDSwitch".</maml:para> <maml:para></maml:para> <maml:para></maml:para> <maml:para> </maml:para> <maml:para></maml:para> </dev:remarks> <command:commandLines> <command:commandLine> <command:commandText> </command:commandText> </command:commandLine> </command:commandLines> </command:example> </command:examples> <maml:relatedLinks> <maml:navigationLink> <maml:linkText>Online version:</maml:linkText> <maml:uri>https://code.vmware.com/doc/preview?id=6330#/doc/Set-VDPort.html</maml:uri> </maml:navigationLink> <maml:navigationLink> <maml:linkText>Get-VDPort</maml:linkText> <maml:uri></maml:uri> </maml:navigationLink> </maml:relatedLinks> </command:command> <command:command xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10"> <command:details> <command:name>Set-VDPortgroup</command:name> <maml:description> <maml:para>This cmdlet modifies the configuration of distributed port groups.</maml:para> </maml:description> <maml:copyright> <maml:para /> <!--Add copy right info here.--> </maml:copyright> <command:verb>Set</command:verb> <command:noun>VDPortgroup</command:noun> <!--Add Dev version info here.--> <dev:version /> </command:details> <maml:description> <!--This is the Description section--> <maml:para>This cmdlet modifies the configuration of distributed port groups. You can set the properties of the distributed port group manually, provide a backup profile to import the port group configuration, or rollback to the last valid configuration. Note: You can import or rollback a configuration only on vSphere 5.1 and later.</maml:para> </maml:description> <command:syntax> <command:syntaxItem> <maml:name>Set-VDPortgroup</maml:name> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>Name</maml:name> <maml:description> <maml:para>Specifies a new name for the distributed port group that you want to configure.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "false" >String</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "true" pipelineInput = "false" position = "named" > <maml:name>Notes</maml:name> <maml:description> <maml:para>Specifies a new description for the distributed port group that you want to configure.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "false" >String</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>NumPorts</maml:name> <maml:description> <maml:para>Specifies a new number of ports on the distributed port group that you want to configure.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "false" >Int32</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>VlanId</maml:name> <maml:description> <maml:para>Specifies a new VLAN ID for the distributed port group that you want to configure. The VLAN IDs of 0 and 4095 are reserved and cannot be used. This parameter is obsolete. Use the corresponding parameter from the Set-VDVlanConfiguration cmdlet instead.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "false" >Int32</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>VlanTrunkRange</maml:name> <maml:description> <maml:para>Specifies a new VLAN trunk range for the distributed port group that you want to configure. Valid values are strings representing ranges of IDs. For example, "1-4, 6, 8-9". This parameter is obsolete. Use the corresponding parameter from the Set-VDVlanConfiguration cmdlet instead.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "false" >VlanRangeList</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>PrivateVlanId</maml:name> <maml:description> <maml:para>Specifies the secondary VLAN ID of a vSphere distributed switch's private VLAN configuration entry. This parameter is obsolete. Use the corresponding parameter from the Set-VDVlanConfiguration cmdlet instead.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "false" >Int32</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>PortBinding</maml:name> <maml:description> <maml:para>Specifies a new port binding setting for the distributed port group that you want to configure. This parameter accepts Static, Dynamic, and Ephemeral values. Note: Dynamic port binding is deprecated. For better performance, static port binding is recommended.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "false" >DistributedPortGroupPortBinding</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>DisableVlan</maml:name> <maml:description> <maml:para>Sets the VLAN type of the distributed port group to None. This parameter is obsolete. Use the corresponding parameter from the Set-VDVlanConfiguration cmdlet instead.</maml:para> </maml:description> </command:parameter> <command:parameter required = "true" variableLength = "true" globbing = "true" pipelineInput = "true (ByValue)" position = "1" > <maml:name>VDPortgroup</maml:name> <maml:description> <maml:para>Specifies the distributed port group that you want to configure.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "true" >VDPortgroup[]</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>RunAsync</maml:name> <maml:description> <maml:para>Indicates that the command returns immediately without waiting for the task to complete. In this mode, the output of the cmdlet is a Task object. For more information about the RunAsync parameter run "help About_RunAsync" in the VMware PowerCLI console.</maml:para> </maml:description> </command:parameter> <command:parameter required = "false" variableLength = "true" globbing = "true" pipelineInput = "false" position = "named" > <maml:name>Server</maml:name> <maml:description> <maml:para>Specifies the vCenter Server systems on which you want to run the cmdlet. If no value is given to this parameter, the command runs on the default servers. For more information about default servers, see the description of Connect-VIServer.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "true" >VIServer[]</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>WhatIf</maml:name> <maml:description> <maml:para>Indicates that the cmdlet is run only to display the changes that would be made and actually no objects are modified.</maml:para> </maml:description> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>Confirm</maml:name> <maml:description> <maml:para>If the value is $true, indicates that the cmdlet asks for confirmation before running. If the value is $false, the cmdlet runs without asking for user confirmation.</maml:para> </maml:description> </command:parameter> </command:syntaxItem> <command:syntaxItem> <maml:name>Set-VDPortgroup</maml:name> <command:parameter required = "true" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>RollbackConfiguration</maml:name> <maml:description> <maml:para>Indicates that you want to rollback the distributed port group to its last valid configuration. Note: Rollback is available only on vSphere 5.1 and later.</maml:para> </maml:description> </command:parameter> <command:parameter required = "true" variableLength = "true" globbing = "true" pipelineInput = "true (ByValue)" position = "1" > <maml:name>VDPortgroup</maml:name> <maml:description> <maml:para>Specifies the distributed port group that you want to configure.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "true" >VDPortgroup[]</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>RunAsync</maml:name> <maml:description> <maml:para>Indicates that the command returns immediately without waiting for the task to complete. In this mode, the output of the cmdlet is a Task object. For more information about the RunAsync parameter run "help About_RunAsync" in the VMware PowerCLI console.</maml:para> </maml:description> </command:parameter> <command:parameter required = "false" variableLength = "true" globbing = "true" pipelineInput = "false" position = "named" > <maml:name>Server</maml:name> <maml:description> <maml:para>Specifies the vCenter Server systems on which you want to run the cmdlet. If no value is given to this parameter, the command runs on the default servers. For more information about default servers, see the description of Connect-VIServer.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "true" >VIServer[]</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>WhatIf</maml:name> <maml:description> <maml:para>Indicates that the cmdlet is run only to display the changes that would be made and actually no objects are modified.</maml:para> </maml:description> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>Confirm</maml:name> <maml:description> <maml:para>If the value is $true, indicates that the cmdlet asks for confirmation before running. If the value is $false, the cmdlet runs without asking for user confirmation.</maml:para> </maml:description> </command:parameter> </command:syntaxItem> <command:syntaxItem> <maml:name>Set-VDPortgroup</maml:name> <command:parameter required = "true" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>BackupPath</maml:name> <maml:description> <maml:para>Specifies the full file path to the .zip file containing the backup configuration that you want to import. You can import only .zip files created with the Export-VDPortgroup cmdlet. Note: This parameter is only supported on vSphere 5.1 and later.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "false" >String</command:parameterValue> </command:parameter> <command:parameter required = "true" variableLength = "true" globbing = "true" pipelineInput = "true (ByValue)" position = "1" > <maml:name>VDPortgroup</maml:name> <maml:description> <maml:para>Specifies the distributed port group that you want to configure.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "true" >VDPortgroup[]</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>RunAsync</maml:name> <maml:description> <maml:para>Indicates that the command returns immediately without waiting for the task to complete. In this mode, the output of the cmdlet is a Task object. For more information about the RunAsync parameter run "help About_RunAsync" in the VMware PowerCLI console.</maml:para> </maml:description> </command:parameter> <command:parameter required = "false" variableLength = "true" globbing = "true" pipelineInput = "false" position = "named" > <maml:name>Server</maml:name> <maml:description> <maml:para>Specifies the vCenter Server systems on which you want to run the cmdlet. If no value is given to this parameter, the command runs on the default servers. For more information about default servers, see the description of Connect-VIServer.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "true" >VIServer[]</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>WhatIf</maml:name> <maml:description> <maml:para>Indicates that the cmdlet is run only to display the changes that would be made and actually no objects are modified.</maml:para> </maml:description> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>Confirm</maml:name> <maml:description> <maml:para>If the value is $true, indicates that the cmdlet asks for confirmation before running. If the value is $false, the cmdlet runs without asking for user confirmation.</maml:para> </maml:description> </command:parameter> </command:syntaxItem> </command:syntax> <command:parameters> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>Name</maml:name> <maml:description> <maml:para>Specifies a new name for the distributed port group that you want to configure.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">String</command:parameterValue> <dev:type> <maml:name>String</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="true" pipelineInput="false" position="named"> <maml:name>Notes</maml:name> <maml:description> <maml:para>Specifies a new description for the distributed port group that you want to configure.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">String</command:parameterValue> <dev:type> <maml:name>String</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>NumPorts</maml:name> <maml:description> <maml:para>Specifies a new number of ports on the distributed port group that you want to configure.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">Int32</command:parameterValue> <dev:type> <maml:name>Int32</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>VlanId</maml:name> <maml:description> <maml:para>Specifies a new VLAN ID for the distributed port group that you want to configure. The VLAN IDs of 0 and 4095 are reserved and cannot be used. This parameter is obsolete. Use the corresponding parameter from the Set-VDVlanConfiguration cmdlet instead.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">Int32</command:parameterValue> <dev:type> <maml:name>Int32</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>VlanTrunkRange</maml:name> <maml:description> <maml:para>Specifies a new VLAN trunk range for the distributed port group that you want to configure. Valid values are strings representing ranges of IDs. For example, "1-4, 6, 8-9". This parameter is obsolete. Use the corresponding parameter from the Set-VDVlanConfiguration cmdlet instead.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">VlanRangeList</command:parameterValue> <dev:type> <maml:name>VlanRangeList</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>PrivateVlanId</maml:name> <maml:description> <maml:para>Specifies the secondary VLAN ID of a vSphere distributed switch's private VLAN configuration entry. This parameter is obsolete. Use the corresponding parameter from the Set-VDVlanConfiguration cmdlet instead.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">Int32</command:parameterValue> <dev:type> <maml:name>Int32</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>PortBinding</maml:name> <maml:description> <maml:para>Specifies a new port binding setting for the distributed port group that you want to configure. This parameter accepts Static, Dynamic, and Ephemeral values. Note: Dynamic port binding is deprecated. For better performance, static port binding is recommended.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">DistributedPortGroupPortBinding</command:parameterValue> <dev:type> <maml:name>DistributedPortGroupPortBinding</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>DisableVlan</maml:name> <maml:description> <maml:para>Sets the VLAN type of the distributed port group to None. This parameter is obsolete. Use the corresponding parameter from the Set-VDVlanConfiguration cmdlet instead.</maml:para> </maml:description> <dev:type> <maml:name>SwitchParameter</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="true" variableLength="true" globbing="true" pipelineInput="true (ByValue)" position="1"> <maml:name>VDPortgroup</maml:name> <maml:description> <maml:para>Specifies the distributed port group that you want to configure.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="true">VDPortgroup[]</command:parameterValue> <dev:type> <maml:name>VDPortgroup[]</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>RunAsync</maml:name> <maml:description> <maml:para>Indicates that the command returns immediately without waiting for the task to complete. In this mode, the output of the cmdlet is a Task object. For more information about the RunAsync parameter run "help About_RunAsync" in the VMware PowerCLI console.</maml:para> </maml:description> <dev:type> <maml:name>SwitchParameter</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="true" pipelineInput="false" position="named"> <maml:name>Server</maml:name> <maml:description> <maml:para>Specifies the vCenter Server systems on which you want to run the cmdlet. If no value is given to this parameter, the command runs on the default servers. For more information about default servers, see the description of Connect-VIServer.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="true">VIServer[]</command:parameterValue> <dev:type> <maml:name>VIServer[]</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>WhatIf</maml:name> <maml:description> <maml:para>Indicates that the cmdlet is run only to display the changes that would be made and actually no objects are modified.</maml:para> </maml:description> <dev:type> <maml:name>SwitchParameter</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>Confirm</maml:name> <maml:description> <maml:para>If the value is $true, indicates that the cmdlet asks for confirmation before running. If the value is $false, the cmdlet runs without asking for user confirmation.</maml:para> </maml:description> <dev:type> <maml:name>SwitchParameter</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="true" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>RollbackConfiguration</maml:name> <maml:description> <maml:para>Indicates that you want to rollback the distributed port group to its last valid configuration. Note: Rollback is available only on vSphere 5.1 and later.</maml:para> </maml:description> <dev:type> <maml:name>SwitchParameter</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="true" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>BackupPath</maml:name> <maml:description> <maml:para>Specifies the full file path to the .zip file containing the backup configuration that you want to import. You can import only .zip files created with the Export-VDPortgroup cmdlet. Note: This parameter is only supported on vSphere 5.1 and later.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">String</command:parameterValue> <dev:type> <maml:name>String</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> </command:parameters> <command:inputTypes> <command:inputType> <dev:type> <maml:name></maml:name> <maml:uri/> <maml:description> <maml:para></maml:para> </maml:description> </dev:type> <maml:description></maml:description> </command:inputType> </command:inputTypes> <command:returnValues> <command:returnValue> <dev:type> <maml:name>The modified VDPortgroup objects</maml:name> <maml:uri /> <maml:description> <maml:para></maml:para> </maml:description> </dev:type> <maml:description></maml:description> </command:returnValue> </command:returnValues> <command:terminatingErrors> </command:terminatingErrors> <command:nonTerminatingErrors> </command:nonTerminatingErrors> <maml:alertSet> <maml:title></maml:title> <maml:alert> <maml:para></maml:para> </maml:alert> </maml:alertSet> <command:examples> <command:example> <maml:title> -------------- Example 1 -------------- </maml:title> <maml:introduction> <maml:para>C:\PS></maml:para> C:\PS> </maml:introduction> <dev:code>Get-VDPortgroup -Name "MyVDPortGroup" | Set-VDPortgroup -Name "MyNewVDPortGroupName" -NumPorts 5 -VlanId 4</dev:code> <dev:remarks> <maml:para>Changes the name, number of ports and the VLAN ID of all distributed port groups named "MyVDPortGroup".</maml:para> <maml:para></maml:para> <maml:para></maml:para> <maml:para> </maml:para> <maml:para></maml:para> </dev:remarks> <command:commandLines> <command:commandLine> <command:commandText> </command:commandText> </command:commandLine> </command:commandLines> </command:example> <command:example> <maml:title> -------------- Example 2 -------------- </maml:title> <maml:introduction> <maml:para>C:\PS></maml:para> C:\PS> </maml:introduction> <dev:code>Get-VDPortgroup -Name "MyVDPortGroup" | Set-VDPortgroup -VlanTrunkRange "1-5, 8-10"</dev:code> <dev:remarks> <maml:para>Changes the VLAN trunk range of all distributed port groups named "MyVDPortGroup".</maml:para> <maml:para></maml:para> <maml:para></maml:para> <maml:para> </maml:para> <maml:para></maml:para> </dev:remarks> <command:commandLines> <command:commandLine> <command:commandText> </command:commandText> </command:commandLine> </command:commandLines> </command:example> <command:example> <maml:title> -------------- Example 3 -------------- </maml:title> <maml:introduction> <maml:para>C:\PS></maml:para> C:\PS> </maml:introduction> <dev:code>$myVDPortgroup = Get-VDPortgroup -Name "MyVDPortGroup" -VDSwitch "MyVDSwitch" Set-VDPortgroup -VDPortgroup $myVDPortgroup -DisableVlan</dev:code> <dev:remarks> <maml:para>Sets the VLAN type of the specified distributed port group to None.</maml:para> <maml:para></maml:para> <maml:para></maml:para> <maml:para> </maml:para> <maml:para></maml:para> </dev:remarks> <command:commandLines> <command:commandLine> <command:commandText> </command:commandText> </command:commandLine> </command:commandLines> </command:example> <command:example> <maml:title> -------------- Example 4 -------------- </maml:title> <maml:introduction> <maml:para>C:\PS></maml:para> C:\PS> </maml:introduction> <dev:code>Get-VDPortgroup -Name "MyVDPortGroup" | Set-VDPortgroup -RollbackConfiguration</dev:code> <dev:remarks> <maml:para>Rollbacks the configuration of all distributed port groups named "MyVDPortGroup".</maml:para> <maml:para></maml:para> <maml:para></maml:para> <maml:para> </maml:para> <maml:para></maml:para> </dev:remarks> <command:commandLines> <command:commandLine> <command:commandText> </command:commandText> </command:commandLine> </command:commandLines> </command:example> <command:example> <maml:title> -------------- Example 5 -------------- </maml:title> <maml:introduction> <maml:para>C:\PS></maml:para> C:\PS> </maml:introduction> <dev:code>Get-VDPortgroup -Name "MyVDPortGroup" | Set-VDPortgroup -BackupPath 'c:\backup.zip'</dev:code> <dev:remarks> <maml:para>Reconfigures all distributed port groups named "MyVDPortGroup" by importing the configuration from the specified backup profile.</maml:para> <maml:para></maml:para> <maml:para></maml:para> <maml:para> </maml:para> <maml:para></maml:para> </dev:remarks> <command:commandLines> <command:commandLine> <command:commandText> </command:commandText> </command:commandLine> </command:commandLines> </command:example> </command:examples> <maml:relatedLinks> <maml:navigationLink> <maml:linkText>Online version:</maml:linkText> <maml:uri>https://code.vmware.com/doc/preview?id=6330#/doc/Export-VDPortgroup.html</maml:uri> </maml:navigationLink> <maml:navigationLink> <maml:linkText>Get-VDPortgroup</maml:linkText> <maml:uri></maml:uri> </maml:navigationLink> <maml:navigationLink> <maml:linkText>New-VDPortgroup</maml:linkText> <maml:uri></maml:uri> </maml:navigationLink> <maml:navigationLink> <maml:linkText>Remove-VDPortgroup</maml:linkText> <maml:uri></maml:uri> </maml:navigationLink> <maml:navigationLink> <maml:linkText>Export-VDPortgroup</maml:linkText> <maml:uri></maml:uri> </maml:navigationLink> </maml:relatedLinks> </command:command> <command:command xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10"> <command:details> <command:name>Set-VDPortgroupOverridePolicy</command:name> <maml:description> <maml:para>This cmdlet modifies the policy for overriding port group settings at port level.</maml:para> </maml:description> <maml:copyright> <maml:para /> <!--Add copy right info here.--> </maml:copyright> <command:verb>Set</command:verb> <command:noun>VDPortgroupOverridePolicy</command:noun> <!--Add Dev version info here.--> <dev:version /> </command:details> <maml:description> <!--This is the Description section--> <maml:para>This cmdlet modifies the policy for overriding port group settings at port level. At least one of the Bool parameters must be specified.</maml:para> </maml:description> <command:syntax> <command:syntaxItem> <maml:name>Set-VDPortgroupOverridePolicy</maml:name> <command:parameter required = "true" variableLength = "true" globbing = "false" pipelineInput = "true (ByValue)" position = "2" > <maml:name>Policy</maml:name> <maml:description> <maml:para>Specifies the port group overriding policy that you want to configure.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "true" >VDPortgroupOverridePolicy[]</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>BlockOverrideAllowed</maml:name> <maml:description> <maml:para>Specifies whether overriding port blocking settings is allowed.</maml:para> </maml:description> <command:parameterValue required="false" variableLength = "false" >Boolean</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>ResetPortConfigAtDisconnect</maml:name> <maml:description> <maml:para>Specifies whether the port configuration is reset when the port is disconnected.</maml:para> </maml:description> <command:parameterValue required="false" variableLength = "false" >Boolean</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>SecurityOverrideAllowed</maml:name> <maml:description> <maml:para>Specifies whether overriding security settings is allowed.</maml:para> </maml:description> <command:parameterValue required="false" variableLength = "false" >Boolean</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>TrafficShapingOverrideAllowed</maml:name> <maml:description> <maml:para>Specifies whether overriding traffic shaping settings is allowed.</maml:para> </maml:description> <command:parameterValue required="false" variableLength = "false" >Boolean</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>UplinkTeamingOverrideAllowed</maml:name> <maml:description> <maml:para>Specifies whether overriding uplink teaming settings is allowed.</maml:para> </maml:description> <command:parameterValue required="false" variableLength = "false" >Boolean</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>VlanOverrideAllowed</maml:name> <maml:description> <maml:para>Specifies whether overriding VLAN settings is allowed.</maml:para> </maml:description> <command:parameterValue required="false" variableLength = "false" >Boolean</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>WhatIf</maml:name> <maml:description> <maml:para>Indicates that the cmdlet is run only to display the changes that would be made and actually no objects are modified.</maml:para> </maml:description> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>Confirm</maml:name> <maml:description> <maml:para>If the value is $true, indicates that the cmdlet asks for confirmation before running. If the value is $false, the cmdlet runs without asking for user confirmation.</maml:para> </maml:description> </command:parameter> </command:syntaxItem> </command:syntax> <command:parameters> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="true (ByValue)" position="2"> <maml:name>Policy</maml:name> <maml:description> <maml:para>Specifies the port group overriding policy that you want to configure.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="true">VDPortgroupOverridePolicy[]</command:parameterValue> <dev:type> <maml:name>VDPortgroupOverridePolicy[]</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>BlockOverrideAllowed</maml:name> <maml:description> <maml:para>Specifies whether overriding port blocking settings is allowed.</maml:para> </maml:description> <command:parameterValue required="false" variableLength="false">Boolean</command:parameterValue> <dev:type> <maml:name>Boolean</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>ResetPortConfigAtDisconnect</maml:name> <maml:description> <maml:para>Specifies whether the port configuration is reset when the port is disconnected.</maml:para> </maml:description> <command:parameterValue required="false" variableLength="false">Boolean</command:parameterValue> <dev:type> <maml:name>Boolean</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>SecurityOverrideAllowed</maml:name> <maml:description> <maml:para>Specifies whether overriding security settings is allowed.</maml:para> </maml:description> <command:parameterValue required="false" variableLength="false">Boolean</command:parameterValue> <dev:type> <maml:name>Boolean</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>TrafficShapingOverrideAllowed</maml:name> <maml:description> <maml:para>Specifies whether overriding traffic shaping settings is allowed.</maml:para> </maml:description> <command:parameterValue required="false" variableLength="false">Boolean</command:parameterValue> <dev:type> <maml:name>Boolean</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>UplinkTeamingOverrideAllowed</maml:name> <maml:description> <maml:para>Specifies whether overriding uplink teaming settings is allowed.</maml:para> </maml:description> <command:parameterValue required="false" variableLength="false">Boolean</command:parameterValue> <dev:type> <maml:name>Boolean</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>VlanOverrideAllowed</maml:name> <maml:description> <maml:para>Specifies whether overriding VLAN settings is allowed.</maml:para> </maml:description> <command:parameterValue required="false" variableLength="false">Boolean</command:parameterValue> <dev:type> <maml:name>Boolean</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>WhatIf</maml:name> <maml:description> <maml:para>Indicates that the cmdlet is run only to display the changes that would be made and actually no objects are modified.</maml:para> </maml:description> <dev:type> <maml:name>SwitchParameter</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>Confirm</maml:name> <maml:description> <maml:para>If the value is $true, indicates that the cmdlet asks for confirmation before running. If the value is $false, the cmdlet runs without asking for user confirmation.</maml:para> </maml:description> <dev:type> <maml:name>SwitchParameter</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> </command:parameters> <command:inputTypes> <command:inputType> <dev:type> <maml:name></maml:name> <maml:uri/> <maml:description> <maml:para></maml:para> </maml:description> </dev:type> <maml:description></maml:description> </command:inputType> </command:inputTypes> <command:returnValues> <command:returnValue> <dev:type> <maml:name>The modified VDPortgroupOverridePolicy objects</maml:name> <maml:uri /> <maml:description> <maml:para></maml:para> </maml:description> </dev:type> <maml:description></maml:description> </command:returnValue> </command:returnValues> <command:terminatingErrors> </command:terminatingErrors> <command:nonTerminatingErrors> </command:nonTerminatingErrors> <maml:alertSet> <maml:title></maml:title> <maml:alert> <maml:para></maml:para> </maml:alert> </maml:alertSet> <command:examples> <command:example> <maml:title> -------------- Example 1 -------------- </maml:title> <maml:introduction> <maml:para>C:\PS></maml:para> C:\PS> </maml:introduction> <dev:code>Get-VDPortgroup "MyVDPortgroup" | Get-VDPortgroupOverridePolicy | Set-VDPortgroupOverridePolicy -BlockOverrideAllowed $true</dev:code> <dev:remarks> <maml:para>Retrieves a distributed port group named "MyVDPortgroup" and updates its overriding policy to allow the port blocking settings to override the default settings at port group level.</maml:para> <maml:para></maml:para> <maml:para></maml:para> <maml:para> </maml:para> <maml:para></maml:para> </dev:remarks> <command:commandLines> <command:commandLine> <command:commandText> </command:commandText> </command:commandLine> </command:commandLines> </command:example> <command:example> <maml:title> -------------- Example 2 -------------- </maml:title> <maml:introduction> <maml:para>C:\PS></maml:para> C:\PS> </maml:introduction> <dev:code>Get-VDSwitch "MyVDSwitch" | Get-VDPortgroup | Get-VDPortgroupOverridePolicy | Set-VDPortgroupOverridePolicy -ResetPortConfigAtDisconnect $true -TrafficShapingOverrideAllowed $true</dev:code> <dev:remarks> <maml:para>Retrieves all port groups inside a distributed switch named "MyVDSwitch" and updates their overriding policies with the options to override the traffic shaping setting at port level, and to reset the distributed port network settings back to the port group settings.</maml:para> <maml:para></maml:para> <maml:para></maml:para> <maml:para> </maml:para> <maml:para></maml:para> </dev:remarks> <command:commandLines> <command:commandLine> <command:commandText> </command:commandText> </command:commandLine> </command:commandLines> </command:example> </command:examples> <maml:relatedLinks> <maml:navigationLink> <maml:linkText>Online version:</maml:linkText> <maml:uri>https://code.vmware.com/doc/preview?id=6330#/doc/Set-VDPortgroupOverridePolicy.html</maml:uri> </maml:navigationLink> <maml:navigationLink> <maml:linkText>Get-VDPortgroupOverridePolicy</maml:linkText> <maml:uri></maml:uri> </maml:navigationLink> </maml:relatedLinks> </command:command> <command:command xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10"> <command:details> <command:name>Set-VDSecurityPolicy</command:name> <maml:description> <maml:para>This cmdlet modifies the security policy for distributed ports.</maml:para> </maml:description> <maml:copyright> <maml:para /> <!--Add copy right info here.--> </maml:copyright> <command:verb>Set</command:verb> <command:noun>VDSecurityPolicy</command:noun> <!--Add Dev version info here.--> <dev:version /> </command:details> <maml:description> <!--This is the Description section--> <maml:para>This cmdlet modifies the security policy for distributed ports or the default port policy at port group or switch level (depending on the input policy).</maml:para> </maml:description> <command:syntax> <command:syntaxItem> <maml:name>Set-VDSecurityPolicy</maml:name> <command:parameter required = "true" variableLength = "true" globbing = "false" pipelineInput = "true (ByValue)" position = "1" > <maml:name>Policy</maml:name> <maml:description> <maml:para>Specifies the security policy that you want to configure.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "true" >SecurityPolicy[]</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>AllowPromiscuous</maml:name> <maml:description> <maml:para>Specifies whether promiscuous mode is enabled for the corresponding distributed port, port group, or switch.</maml:para> </maml:description> <command:parameterValue required="false" variableLength = "false" >Boolean</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>AllowPromiscuousInherited</maml:name> <maml:description> <maml:para>Specifies whether the AllowPromiscuous setting is inherited from a parent object, such as a distributed port group or switch.</maml:para> </maml:description> <command:parameterValue required="false" variableLength = "false" >Boolean</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>ForgedTransmits</maml:name> <maml:description> <maml:para>Specifies whether forged transmits are enabled for the corresponding distributed port, port group, or switch.</maml:para> </maml:description> <command:parameterValue required="false" variableLength = "false" >Boolean</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>ForgedTransmitsInherited</maml:name> <maml:description> <maml:para>Specifies whether the ForgedTransmits setting is inherited from a parent object, such as a distributed port group or switch.</maml:para> </maml:description> <command:parameterValue required="false" variableLength = "false" >Boolean</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>MacChanges</maml:name> <maml:description> <maml:para>Specifies whether MAC address changes are enabled for the corresponding distributed port, port group, or switch.</maml:para> </maml:description> <command:parameterValue required="false" variableLength = "false" >Boolean</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>MacChangesInherited</maml:name> <maml:description> <maml:para>Specifies whether the MacChanges setting is inherited from a parent object, such as a distributed port group or switch.</maml:para> </maml:description> <command:parameterValue required="false" variableLength = "false" >Boolean</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>WhatIf</maml:name> <maml:description> <maml:para>Indicates that the cmdlet is run only to display the changes that would be made and actually no objects are modified.</maml:para> </maml:description> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>Confirm</maml:name> <maml:description> <maml:para>If the value is $true, indicates that the cmdlet asks for confirmation before running. If the value is $false, the cmdlet runs without asking for user confirmation.</maml:para> </maml:description> </command:parameter> </command:syntaxItem> </command:syntax> <command:parameters> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="true (ByValue)" position="1"> <maml:name>Policy</maml:name> <maml:description> <maml:para>Specifies the security policy that you want to configure.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="true">SecurityPolicy[]</command:parameterValue> <dev:type> <maml:name>SecurityPolicy[]</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>AllowPromiscuous</maml:name> <maml:description> <maml:para>Specifies whether promiscuous mode is enabled for the corresponding distributed port, port group, or switch.</maml:para> </maml:description> <command:parameterValue required="false" variableLength="false">Boolean</command:parameterValue> <dev:type> <maml:name>Boolean</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>AllowPromiscuousInherited</maml:name> <maml:description> <maml:para>Specifies whether the AllowPromiscuous setting is inherited from a parent object, such as a distributed port group or switch.</maml:para> </maml:description> <command:parameterValue required="false" variableLength="false">Boolean</command:parameterValue> <dev:type> <maml:name>Boolean</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>ForgedTransmits</maml:name> <maml:description> <maml:para>Specifies whether forged transmits are enabled for the corresponding distributed port, port group, or switch.</maml:para> </maml:description> <command:parameterValue required="false" variableLength="false">Boolean</command:parameterValue> <dev:type> <maml:name>Boolean</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>ForgedTransmitsInherited</maml:name> <maml:description> <maml:para>Specifies whether the ForgedTransmits setting is inherited from a parent object, such as a distributed port group or switch.</maml:para> </maml:description> <command:parameterValue required="false" variableLength="false">Boolean</command:parameterValue> <dev:type> <maml:name>Boolean</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>MacChanges</maml:name> <maml:description> <maml:para>Specifies whether MAC address changes are enabled for the corresponding distributed port, port group, or switch.</maml:para> </maml:description> <command:parameterValue required="false" variableLength="false">Boolean</command:parameterValue> <dev:type> <maml:name>Boolean</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>MacChangesInherited</maml:name> <maml:description> <maml:para>Specifies whether the MacChanges setting is inherited from a parent object, such as a distributed port group or switch.</maml:para> </maml:description> <command:parameterValue required="false" variableLength="false">Boolean</command:parameterValue> <dev:type> <maml:name>Boolean</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>WhatIf</maml:name> <maml:description> <maml:para>Indicates that the cmdlet is run only to display the changes that would be made and actually no objects are modified.</maml:para> </maml:description> <dev:type> <maml:name>SwitchParameter</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>Confirm</maml:name> <maml:description> <maml:para>If the value is $true, indicates that the cmdlet asks for confirmation before running. If the value is $false, the cmdlet runs without asking for user confirmation.</maml:para> </maml:description> <dev:type> <maml:name>SwitchParameter</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> </command:parameters> <command:inputTypes> <command:inputType> <dev:type> <maml:name></maml:name> <maml:uri/> <maml:description> <maml:para></maml:para> </maml:description> </dev:type> <maml:description></maml:description> </command:inputType> </command:inputTypes> <command:returnValues> <command:returnValue> <dev:type> <maml:name>The modified SecurityPolicy objects</maml:name> <maml:uri /> <maml:description> <maml:para></maml:para> </maml:description> </dev:type> <maml:description></maml:description> </command:returnValue> </command:returnValues> <command:terminatingErrors> </command:terminatingErrors> <command:nonTerminatingErrors> </command:nonTerminatingErrors> <maml:alertSet> <maml:title></maml:title> <maml:alert> <maml:para></maml:para> </maml:alert> </maml:alertSet> <command:examples> <command:example> <maml:title> -------------- Example 1 -------------- </maml:title> <maml:introduction> <maml:para>C:\PS></maml:para> C:\PS> </maml:introduction> <dev:code>Get-VDSwitch "MyVDSwitch" | Get-VDSecurityPolicy | Set-VDSecurityPolicy -MacChanges $true</dev:code> <dev:remarks> <maml:para>Retrieves a vSphere distributed switch named "MyVDSwitch" and updates its security policy to allow MAC address changes.</maml:para> <maml:para></maml:para> <maml:para></maml:para> <maml:para> </maml:para> <maml:para></maml:para> </dev:remarks> <command:commandLines> <command:commandLine> <command:commandText> </command:commandText> </command:commandLine> </command:commandLines> </command:example> <command:example> <maml:title> -------------- Example 2 -------------- </maml:title> <maml:introduction> <maml:para>C:\PS></maml:para> C:\PS> </maml:introduction> <dev:code>Get-VDPortgroup "MyVDPortgroup" | Get-VDSecurityPolicy | Set-VDSecurityPolicy -ForgedTransmitsInherited $true</dev:code> <dev:remarks> <maml:para>Retrieves a distributed port group named "MyVDPortgroup" and updates the security policy to inherit the setting value for controlling outbound frames filtering by MAC address from its parent.</maml:para> <maml:para></maml:para> <maml:para></maml:para> <maml:para> </maml:para> <maml:para></maml:para> </dev:remarks> <command:commandLines> <command:commandLine> <command:commandText> </command:commandText> </command:commandLine> </command:commandLines> </command:example> </command:examples> <maml:relatedLinks> <maml:navigationLink> <maml:linkText>Online version:</maml:linkText> <maml:uri>https://code.vmware.com/doc/preview?id=6330#/doc/Set-VDSecurityPolicy.html</maml:uri> </maml:navigationLink> <maml:navigationLink> <maml:linkText>Get-VDSecurityPolicy</maml:linkText> <maml:uri></maml:uri> </maml:navigationLink> </maml:relatedLinks> </command:command> <command:command xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10"> <command:details> <command:name>Set-VDSwitch</command:name> <maml:description> <maml:para>This cmdlet modifies the configuration of vSphere distributed switches.</maml:para> </maml:description> <maml:copyright> <maml:para /> <!--Add copy right info here.--> </maml:copyright> <command:verb>Set</command:verb> <command:noun>VDSwitch</command:noun> <!--Add Dev version info here.--> <dev:version /> </command:details> <maml:description> <!--This is the Description section--> <maml:para>This cmdlet modifies the configuration of vSphere distributed switches. You can set the properties of the vSphere distributed switch manually, rollback the configuration to its previous state, or import it from a backup profile. Note: Rollback and importing are available only on vSphere 5.1 and later.</maml:para> </maml:description> <command:syntax> <command:syntaxItem> <maml:name>Set-VDSwitch</maml:name> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>Name</maml:name> <maml:description> <maml:para>Specifies a new name for the vSphere distributed switch that you want to configure.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "false" >String</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>ContactDetails</maml:name> <maml:description> <maml:para>Specifies new contact details of the vSphere distributed switch administrator.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "false" >String</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>ContactName</maml:name> <maml:description> <maml:para>Specifies a new name for the vSphere distributed switch administrator.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "false" >String</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>LinkDiscoveryProtocol</maml:name> <maml:description> <maml:para>Specifies the link discovery protocol for the vSphere distributed switch that you want to configure. This parameter accepts CDP and LLDP values.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "false" >LinkDiscoveryProtocol</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>LinkDiscoveryProtocolOperation</maml:name> <maml:description> <maml:para>Specifies the link discovery protocol operation for the vSphere distributed switch that you want to configure. This parameter accepts Advertise, Listen, Both, and Disabled values.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "false" >LinkDiscoveryOperation</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>MaxPorts</maml:name> <maml:description> <maml:para>Specifies the maximum number of ports allowed on the vSphere distributed switch that you want to configure.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "false" >Int32</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>Mtu</maml:name> <maml:description> <maml:para>Specifies the maximum MTU size for the vSphere distributed switch that you want to configure. Valid values are positive integers only.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "false" >Int32</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>Notes</maml:name> <maml:description> <maml:para>Specifies a new description for the vSphere distributed switch that you want to configure.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "false" >String</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>NumUplinkPorts</maml:name> <maml:description> <maml:para>Specifies the number of uplink ports on the vSphere distributed switch that you want to configure.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "false" >Int32</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>Version</maml:name> <maml:description> <maml:para>Specifies a new version for the vSphere distributed switch that you want to configure. This parameter accepts 4.0, 4.1.0, 5.0.0, 5.1.0, 5.5.0, and 6.0.0 values. You cannot specify a version that is incompatible with the version of the vCenter Server system you are connected to.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "false" >String</command:parameterValue> </command:parameter> <command:parameter required = "true" variableLength = "true" globbing = "true" pipelineInput = "true (ByValue)" position = "2" > <maml:name>VDSwitch</maml:name> <maml:description> <maml:para>Specifies the vSphere distributed switch that you want to configure.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "true" >VDSwitch[]</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>RunAsync</maml:name> <maml:description> <maml:para>Indicates that the command returns immediately without waiting for the task to complete. In this mode, the output of the cmdlet is a Task object. For more information about the RunAsync parameter run "help About_RunAsync" in the VMware PowerCLI console.</maml:para> </maml:description> </command:parameter> <command:parameter required = "false" variableLength = "true" globbing = "true" pipelineInput = "false" position = "named" > <maml:name>Server</maml:name> <maml:description> <maml:para>Specifies the vCenter Server systems on which you want to run the cmdlet. If no value is given to this parameter, the command runs on the default servers. For more information about default servers, see the description of Connect-VIServer.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "true" >VIServer[]</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>WhatIf</maml:name> <maml:description> <maml:para>Indicates that the cmdlet is run only to display the changes that would be made and actually no objects are modified.</maml:para> </maml:description> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>Confirm</maml:name> <maml:description> <maml:para>If the value is $true, indicates that the cmdlet asks for confirmation before running. If the value is $false, the cmdlet runs without asking for user confirmation.</maml:para> </maml:description> </command:parameter> </command:syntaxItem> <command:syntaxItem> <maml:name>Set-VDSwitch</maml:name> <command:parameter required = "true" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>BackupPath</maml:name> <maml:description> <maml:para>Specifies the full file path to the .zip file containing the backup configuration that you want to import. You can import only .zip files created with the Export-VDSwitch cmdlet. Note: This parameter is supported only on vSphere 5.1 and later.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "false" >String</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>WithoutPortGroups</maml:name> <maml:description> <maml:para>Indicates that the specified backup configuration is imported without its port groups. Note: This parameter is supported only on vSphere 5.1 and later.</maml:para> </maml:description> </command:parameter> <command:parameter required = "true" variableLength = "true" globbing = "true" pipelineInput = "true (ByValue)" position = "2" > <maml:name>VDSwitch</maml:name> <maml:description> <maml:para>Specifies the vSphere distributed switch that you want to configure.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "true" >VDSwitch[]</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>RunAsync</maml:name> <maml:description> <maml:para>Indicates that the command returns immediately without waiting for the task to complete. In this mode, the output of the cmdlet is a Task object. For more information about the RunAsync parameter run "help About_RunAsync" in the VMware PowerCLI console.</maml:para> </maml:description> </command:parameter> <command:parameter required = "false" variableLength = "true" globbing = "true" pipelineInput = "false" position = "named" > <maml:name>Server</maml:name> <maml:description> <maml:para>Specifies the vCenter Server systems on which you want to run the cmdlet. If no value is given to this parameter, the command runs on the default servers. For more information about default servers, see the description of Connect-VIServer.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "true" >VIServer[]</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>WhatIf</maml:name> <maml:description> <maml:para>Indicates that the cmdlet is run only to display the changes that would be made and actually no objects are modified.</maml:para> </maml:description> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>Confirm</maml:name> <maml:description> <maml:para>If the value is $true, indicates that the cmdlet asks for confirmation before running. If the value is $false, the cmdlet runs without asking for user confirmation.</maml:para> </maml:description> </command:parameter> </command:syntaxItem> <command:syntaxItem> <maml:name>Set-VDSwitch</maml:name> <command:parameter required = "true" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>RollBackConfiguration</maml:name> <maml:description> <maml:para>Indicates that you want to rollback the configuration of the vSphere distributed switch to an earlier state. Note: This parameter is supported only on vSphere 5.1 and later.</maml:para> </maml:description> </command:parameter> <command:parameter required = "true" variableLength = "true" globbing = "true" pipelineInput = "true (ByValue)" position = "2" > <maml:name>VDSwitch</maml:name> <maml:description> <maml:para>Specifies the vSphere distributed switch that you want to configure.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "true" >VDSwitch[]</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>RunAsync</maml:name> <maml:description> <maml:para>Indicates that the command returns immediately without waiting for the task to complete. In this mode, the output of the cmdlet is a Task object. For more information about the RunAsync parameter run "help About_RunAsync" in the VMware PowerCLI console.</maml:para> </maml:description> </command:parameter> <command:parameter required = "false" variableLength = "true" globbing = "true" pipelineInput = "false" position = "named" > <maml:name>Server</maml:name> <maml:description> <maml:para>Specifies the vCenter Server systems on which you want to run the cmdlet. If no value is given to this parameter, the command runs on the default servers. For more information about default servers, see the description of Connect-VIServer.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "true" >VIServer[]</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>WhatIf</maml:name> <maml:description> <maml:para>Indicates that the cmdlet is run only to display the changes that would be made and actually no objects are modified.</maml:para> </maml:description> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>Confirm</maml:name> <maml:description> <maml:para>If the value is $true, indicates that the cmdlet asks for confirmation before running. If the value is $false, the cmdlet runs without asking for user confirmation.</maml:para> </maml:description> </command:parameter> </command:syntaxItem> </command:syntax> <command:parameters> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>Name</maml:name> <maml:description> <maml:para>Specifies a new name for the vSphere distributed switch that you want to configure.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">String</command:parameterValue> <dev:type> <maml:name>String</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>ContactDetails</maml:name> <maml:description> <maml:para>Specifies new contact details of the vSphere distributed switch administrator.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">String</command:parameterValue> <dev:type> <maml:name>String</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>ContactName</maml:name> <maml:description> <maml:para>Specifies a new name for the vSphere distributed switch administrator.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">String</command:parameterValue> <dev:type> <maml:name>String</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>LinkDiscoveryProtocol</maml:name> <maml:description> <maml:para>Specifies the link discovery protocol for the vSphere distributed switch that you want to configure. This parameter accepts CDP and LLDP values.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">LinkDiscoveryProtocol</command:parameterValue> <dev:type> <maml:name>LinkDiscoveryProtocol</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>LinkDiscoveryProtocolOperation</maml:name> <maml:description> <maml:para>Specifies the link discovery protocol operation for the vSphere distributed switch that you want to configure. This parameter accepts Advertise, Listen, Both, and Disabled values.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">LinkDiscoveryOperation</command:parameterValue> <dev:type> <maml:name>LinkDiscoveryOperation</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>MaxPorts</maml:name> <maml:description> <maml:para>Specifies the maximum number of ports allowed on the vSphere distributed switch that you want to configure.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">Int32</command:parameterValue> <dev:type> <maml:name>Int32</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>Mtu</maml:name> <maml:description> <maml:para>Specifies the maximum MTU size for the vSphere distributed switch that you want to configure. Valid values are positive integers only.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">Int32</command:parameterValue> <dev:type> <maml:name>Int32</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>Notes</maml:name> <maml:description> <maml:para>Specifies a new description for the vSphere distributed switch that you want to configure.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">String</command:parameterValue> <dev:type> <maml:name>String</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>NumUplinkPorts</maml:name> <maml:description> <maml:para>Specifies the number of uplink ports on the vSphere distributed switch that you want to configure.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">Int32</command:parameterValue> <dev:type> <maml:name>Int32</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>Version</maml:name> <maml:description> <maml:para>Specifies a new version for the vSphere distributed switch that you want to configure. This parameter accepts 4.0, 4.1.0, 5.0.0, 5.1.0, 5.5.0, and 6.0.0 values. You cannot specify a version that is incompatible with the version of the vCenter Server system you are connected to.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">String</command:parameterValue> <dev:type> <maml:name>String</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="true" variableLength="true" globbing="true" pipelineInput="true (ByValue)" position="2"> <maml:name>VDSwitch</maml:name> <maml:description> <maml:para>Specifies the vSphere distributed switch that you want to configure.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="true">VDSwitch[]</command:parameterValue> <dev:type> <maml:name>VDSwitch[]</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>RunAsync</maml:name> <maml:description> <maml:para>Indicates that the command returns immediately without waiting for the task to complete. In this mode, the output of the cmdlet is a Task object. For more information about the RunAsync parameter run "help About_RunAsync" in the VMware PowerCLI console.</maml:para> </maml:description> <dev:type> <maml:name>SwitchParameter</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="true" pipelineInput="false" position="named"> <maml:name>Server</maml:name> <maml:description> <maml:para>Specifies the vCenter Server systems on which you want to run the cmdlet. If no value is given to this parameter, the command runs on the default servers. For more information about default servers, see the description of Connect-VIServer.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="true">VIServer[]</command:parameterValue> <dev:type> <maml:name>VIServer[]</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>WhatIf</maml:name> <maml:description> <maml:para>Indicates that the cmdlet is run only to display the changes that would be made and actually no objects are modified.</maml:para> </maml:description> <dev:type> <maml:name>SwitchParameter</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>Confirm</maml:name> <maml:description> <maml:para>If the value is $true, indicates that the cmdlet asks for confirmation before running. If the value is $false, the cmdlet runs without asking for user confirmation.</maml:para> </maml:description> <dev:type> <maml:name>SwitchParameter</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="true" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>BackupPath</maml:name> <maml:description> <maml:para>Specifies the full file path to the .zip file containing the backup configuration that you want to import. You can import only .zip files created with the Export-VDSwitch cmdlet. Note: This parameter is supported only on vSphere 5.1 and later.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">String</command:parameterValue> <dev:type> <maml:name>String</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>WithoutPortGroups</maml:name> <maml:description> <maml:para>Indicates that the specified backup configuration is imported without its port groups. Note: This parameter is supported only on vSphere 5.1 and later.</maml:para> </maml:description> <dev:type> <maml:name>SwitchParameter</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="true" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>RollBackConfiguration</maml:name> <maml:description> <maml:para>Indicates that you want to rollback the configuration of the vSphere distributed switch to an earlier state. Note: This parameter is supported only on vSphere 5.1 and later.</maml:para> </maml:description> <dev:type> <maml:name>SwitchParameter</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> </command:parameters> <command:inputTypes> <command:inputType> <dev:type> <maml:name></maml:name> <maml:uri/> <maml:description> <maml:para></maml:para> </maml:description> </dev:type> <maml:description></maml:description> </command:inputType> </command:inputTypes> <command:returnValues> <command:returnValue> <dev:type> <maml:name>The modified VDSwitch objects</maml:name> <maml:uri /> <maml:description> <maml:para></maml:para> </maml:description> </dev:type> <maml:description></maml:description> </command:returnValue> </command:returnValues> <command:terminatingErrors> </command:terminatingErrors> <command:nonTerminatingErrors> </command:nonTerminatingErrors> <maml:alertSet> <maml:title></maml:title> <maml:alert> <maml:para></maml:para> </maml:alert> </maml:alertSet> <command:examples> <command:example> <maml:title> -------------- Example 1 -------------- </maml:title> <maml:introduction> <maml:para>C:\PS></maml:para> C:\PS> </maml:introduction> <dev:code>Get-VDSwitch -Name "MyVDSwitch" | Set-VDSwitch -MaxPorts 1000 -NumUplinkPorts 8 -Mtu 2000</dev:code> <dev:remarks> <maml:para>Modifies the maximum number of ports, the number of uplink ports, and the maximum MTU size of the specified vSphere distributed switch.</maml:para> <maml:para></maml:para> <maml:para></maml:para> <maml:para> </maml:para> <maml:para></maml:para> </dev:remarks> <command:commandLines> <command:commandLine> <command:commandText> </command:commandText> </command:commandLine> </command:commandLines> </command:example> <command:example> <maml:title> -------------- Example 2 -------------- </maml:title> <maml:introduction> <maml:para>C:\PS></maml:para> C:\PS> </maml:introduction> <dev:code>$myVDSwitches = Get-VDSwitch -Name MyVDSwitch* Set-VDSwitch -VDSwitch $myVDSwitches -Version '5.1.0'</dev:code> <dev:remarks> <maml:para>Changes the version of all vSphere distributed switches whose names start with "MyVDSwitch".</maml:para> <maml:para></maml:para> <maml:para></maml:para> <maml:para> </maml:para> <maml:para></maml:para> </dev:remarks> <command:commandLines> <command:commandLine> <command:commandText> </command:commandText> </command:commandLine> </command:commandLines> </command:example> <command:example> <maml:title> -------------- Example 3 -------------- </maml:title> <maml:introduction> <maml:para>C:\PS></maml:para> C:\PS> </maml:introduction> <dev:code>$myVDSwitch = Get-VDSwitch -Name "MyVDSwitch" Set-VDSwitch -VDSwitch $myVDSwitch -LinkDiscoveryProtocol LLDP -LinkDiscoveryProtocolOperation Listen</dev:code> <dev:remarks> <maml:para>Enables link discovery protocol on the specified vSphere distributed switch, sets it to LLDP and changes the link discovery protocol operation to listen.</maml:para> <maml:para></maml:para> <maml:para></maml:para> <maml:para> </maml:para> <maml:para></maml:para> </dev:remarks> <command:commandLines> <command:commandLine> <command:commandText> </command:commandText> </command:commandLine> </command:commandLines> </command:example> <command:example> <maml:title> -------------- Example 4 -------------- </maml:title> <maml:introduction> <maml:para>C:\PS></maml:para> C:\PS> </maml:introduction> <dev:code>Get-VDSwitch -Name "MyVDSwitch" | Set-VDSwitch -BackupPath 'c:\MyVDSwitchBackups\MyVDSwitch_12_12_2012.zip' -WithoutPortGroups</dev:code> <dev:remarks> <maml:para>Reconfigures the specified vSphere distributed switch by importing the specified backup profile. The original port groups are not recreated.</maml:para> <maml:para></maml:para> <maml:para></maml:para> <maml:para> </maml:para> <maml:para></maml:para> </dev:remarks> <command:commandLines> <command:commandLine> <command:commandText> </command:commandText> </command:commandLine> </command:commandLines> </command:example> <command:example> <maml:title> -------------- Example 5 -------------- </maml:title> <maml:introduction> <maml:para>C:\PS></maml:para> C:\PS> </maml:introduction> <dev:code>Get-VDSwitch -Name "MyVDSwitch" | Set-VDSwitch -RollbackConfiguration</dev:code> <dev:remarks> <maml:para>Rollbacks the configuration of the specified vSphere distributed switch to its previous state.</maml:para> <maml:para></maml:para> <maml:para></maml:para> <maml:para> </maml:para> <maml:para></maml:para> </dev:remarks> <command:commandLines> <command:commandLine> <command:commandText> </command:commandText> </command:commandLine> </command:commandLines> </command:example> </command:examples> <maml:relatedLinks> <maml:navigationLink> <maml:linkText>Online version:</maml:linkText> <maml:uri>https://code.vmware.com/doc/preview?id=6330#/doc/Set-VDSwitch.html</maml:uri> </maml:navigationLink> <maml:navigationLink> <maml:linkText>New-VDSwitch</maml:linkText> <maml:uri></maml:uri> </maml:navigationLink> <maml:navigationLink> <maml:linkText>Export-VDSwitch</maml:linkText> <maml:uri></maml:uri> </maml:navigationLink> <maml:navigationLink> <maml:linkText>Get-VDSwitch</maml:linkText> <maml:uri></maml:uri> </maml:navigationLink> <maml:navigationLink> <maml:linkText>Remove-VDSwitch</maml:linkText> <maml:uri></maml:uri> </maml:navigationLink> </maml:relatedLinks> </command:command> <command:command xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10"> <command:details> <command:name>Set-VDTrafficShapingPolicy</command:name> <maml:description> <maml:para>This cmdlet modifies the traffic shaping policy for distributed ports.</maml:para> </maml:description> <maml:copyright> <maml:para /> <!--Add copy right info here.--> </maml:copyright> <command:verb>Set</command:verb> <command:noun>VDTrafficShapingPolicy</command:noun> <!--Add Dev version info here.--> <dev:version /> </command:details> <maml:description> <!--This is the Description section--> <maml:para>This cmdlet modifies the traffic shaping policy for distributed ports or the default port policy at port group or switch level (depending on the input policy).</maml:para> </maml:description> <command:syntax> <command:syntaxItem> <maml:name>Set-VDTrafficShapingPolicy</maml:name> <command:parameter required = "true" variableLength = "true" globbing = "false" pipelineInput = "true (ByValue)" position = "1" > <maml:name>Policy</maml:name> <maml:description> <maml:para>Specifies the traffic shaping policy that you want to configure.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "true" >TrafficShapingPolicy[]</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>Enabled</maml:name> <maml:description> <maml:para>Specifies whether traffic shaping is enabled for the corresponding distributed port, port group, or switch.</maml:para> </maml:description> <command:parameterValue required="false" variableLength = "false" >Boolean</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>EnabledInherited</maml:name> <maml:description> <maml:para>Specifies whether the Enabled setting is inherited from a parent object, such as a distributed port group or switch.</maml:para> </maml:description> <command:parameterValue required="false" variableLength = "false" >Boolean</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>AverageBandwidth</maml:name> <maml:description> <maml:para>Specifies the average bandwidth of the traffic shaping policy for the corresponding distributed port, port group, or switch. The value is in bits per second.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "false" >Int64</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>AverageBandwidthInherited</maml:name> <maml:description> <maml:para>Specifies whether the AverageBandwidth setting is inherited from a parent object, such as a distributed port group or switch.</maml:para> </maml:description> <command:parameterValue required="false" variableLength = "false" >Boolean</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>BurstSize</maml:name> <maml:description> <maml:para>Specifies the burst size of the traffic shaping policy for the corresponding distributed port, port group, or switch. The value is in bits per second.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "false" >Int64</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>BurstSizeInherited</maml:name> <maml:description> <maml:para>Specifies whether the BurstSize setting is inherited from a parent object, such as a distributed port group or switch.</maml:para> </maml:description> <command:parameterValue required="false" variableLength = "false" >Boolean</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>PeakBandwidth</maml:name> <maml:description> <maml:para>Specifies the peak bandwidth of the traffic shaping policy for the corresponding distributed port, port group, or switch. The value is in bits per second.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "false" >Int64</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>PeakBandwidthInherited</maml:name> <maml:description> <maml:para>Specifies whether the PeakBandwidth setting is inherited from a parent object, such as a distributed port group or switch.</maml:para> </maml:description> <command:parameterValue required="false" variableLength = "false" >Boolean</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>WhatIf</maml:name> <maml:description> <maml:para>Indicates that the cmdlet is run only to display the changes that would be made and actually no objects are modified.</maml:para> </maml:description> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>Confirm</maml:name> <maml:description> <maml:para>If the value is $true, indicates that the cmdlet asks for confirmation before running. If the value is $false, the cmdlet runs without asking for user confirmation.</maml:para> </maml:description> </command:parameter> </command:syntaxItem> </command:syntax> <command:parameters> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="true (ByValue)" position="1"> <maml:name>Policy</maml:name> <maml:description> <maml:para>Specifies the traffic shaping policy that you want to configure.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="true">TrafficShapingPolicy[]</command:parameterValue> <dev:type> <maml:name>TrafficShapingPolicy[]</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>Enabled</maml:name> <maml:description> <maml:para>Specifies whether traffic shaping is enabled for the corresponding distributed port, port group, or switch.</maml:para> </maml:description> <command:parameterValue required="false" variableLength="false">Boolean</command:parameterValue> <dev:type> <maml:name>Boolean</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>EnabledInherited</maml:name> <maml:description> <maml:para>Specifies whether the Enabled setting is inherited from a parent object, such as a distributed port group or switch.</maml:para> </maml:description> <command:parameterValue required="false" variableLength="false">Boolean</command:parameterValue> <dev:type> <maml:name>Boolean</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>AverageBandwidth</maml:name> <maml:description> <maml:para>Specifies the average bandwidth of the traffic shaping policy for the corresponding distributed port, port group, or switch. The value is in bits per second.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">Int64</command:parameterValue> <dev:type> <maml:name>Int64</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>AverageBandwidthInherited</maml:name> <maml:description> <maml:para>Specifies whether the AverageBandwidth setting is inherited from a parent object, such as a distributed port group or switch.</maml:para> </maml:description> <command:parameterValue required="false" variableLength="false">Boolean</command:parameterValue> <dev:type> <maml:name>Boolean</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>BurstSize</maml:name> <maml:description> <maml:para>Specifies the burst size of the traffic shaping policy for the corresponding distributed port, port group, or switch. The value is in bits per second.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">Int64</command:parameterValue> <dev:type> <maml:name>Int64</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>BurstSizeInherited</maml:name> <maml:description> <maml:para>Specifies whether the BurstSize setting is inherited from a parent object, such as a distributed port group or switch.</maml:para> </maml:description> <command:parameterValue required="false" variableLength="false">Boolean</command:parameterValue> <dev:type> <maml:name>Boolean</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>PeakBandwidth</maml:name> <maml:description> <maml:para>Specifies the peak bandwidth of the traffic shaping policy for the corresponding distributed port, port group, or switch. The value is in bits per second.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">Int64</command:parameterValue> <dev:type> <maml:name>Int64</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>PeakBandwidthInherited</maml:name> <maml:description> <maml:para>Specifies whether the PeakBandwidth setting is inherited from a parent object, such as a distributed port group or switch.</maml:para> </maml:description> <command:parameterValue required="false" variableLength="false">Boolean</command:parameterValue> <dev:type> <maml:name>Boolean</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>WhatIf</maml:name> <maml:description> <maml:para>Indicates that the cmdlet is run only to display the changes that would be made and actually no objects are modified.</maml:para> </maml:description> <dev:type> <maml:name>SwitchParameter</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>Confirm</maml:name> <maml:description> <maml:para>If the value is $true, indicates that the cmdlet asks for confirmation before running. If the value is $false, the cmdlet runs without asking for user confirmation.</maml:para> </maml:description> <dev:type> <maml:name>SwitchParameter</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> </command:parameters> <command:inputTypes> <command:inputType> <dev:type> <maml:name></maml:name> <maml:uri/> <maml:description> <maml:para></maml:para> </maml:description> </dev:type> <maml:description></maml:description> </command:inputType> </command:inputTypes> <command:returnValues> <command:returnValue> <dev:type> <maml:name>The modified TrafficShapingPolicy objects</maml:name> <maml:uri /> <maml:description> <maml:para></maml:para> </maml:description> </dev:type> <maml:description></maml:description> </command:returnValue> </command:returnValues> <command:terminatingErrors> </command:terminatingErrors> <command:nonTerminatingErrors> </command:nonTerminatingErrors> <maml:alertSet> <maml:title></maml:title> <maml:alert> <maml:para></maml:para> </maml:alert> </maml:alertSet> <command:examples> <command:example> <maml:title> -------------- Example 1 -------------- </maml:title> <maml:introduction> <maml:para>C:\PS></maml:para> C:\PS> </maml:introduction> <dev:code>Get-VDSwitch "MyVDSwitch" | Get-VDPortgroup "MyVDPortgroup" | Get-VDPort -Key 4| Get-VDTrafficShapingPolicy -Direction In | Set-VDTrafficShapingPolicy -Enabled $true -AverageBandwidth 100000</dev:code> <dev:remarks> <maml:para>Enables traffic shaping for a specific port in a distributed port group named "MyVDPortgroup" and updates the average bandwidth settings in their traffic shaping policies.</maml:para> <maml:para></maml:para> <maml:para></maml:para> <maml:para> </maml:para> <maml:para></maml:para> </dev:remarks> <command:commandLines> <command:commandLine> <command:commandText> </command:commandText> </command:commandLine> </command:commandLines> </command:example> <command:example> <maml:title> -------------- Example 2 -------------- </maml:title> <maml:introduction> <maml:para>C:\PS></maml:para> C:\PS> </maml:introduction> <dev:code>Get-VDPortgroup "MyVDPortgroup" | Get-VDTrafficShapingPolicy | Set-VDTrafficShapingPolicy -BurstSizeInherited</dev:code> <dev:remarks> <maml:para>Retrieves a distributed port group named "MyVDPortgroup" and updates its traffic shaping policy by inheriting the burst size from its corresponding parent.</maml:para> <maml:para></maml:para> <maml:para></maml:para> <maml:para> </maml:para> <maml:para></maml:para> </dev:remarks> <command:commandLines> <command:commandLine> <command:commandText> </command:commandText> </command:commandLine> </command:commandLines> </command:example> </command:examples> <maml:relatedLinks> <maml:navigationLink> <maml:linkText>Online version:</maml:linkText> <maml:uri>https://code.vmware.com/doc/preview?id=6330#/doc/Set-VDTrafficShapingPolicy.html</maml:uri> </maml:navigationLink> <maml:navigationLink> <maml:linkText>Get-VDTrafficShapingPolicy</maml:linkText> <maml:uri></maml:uri> </maml:navigationLink> </maml:relatedLinks> </command:command> <command:command xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10"> <command:details> <command:name>Set-VDUplinkLacpPolicy</command:name> <maml:description> <maml:para>This cmdlet modifies the Link Aggregation Control Protocol policy for uplink ports.</maml:para> </maml:description> <maml:copyright> <maml:para /> <!--Add copy right info here.--> </maml:copyright> <command:verb>Set</command:verb> <command:noun>VDUplinkLacpPolicy</command:noun> <!--Add Dev version info here.--> <dev:version /> </command:details> <maml:description> <!--This is the Description section--> <maml:para>This cmdlet modifies the Link Aggregation Control Protocol policy for uplink ports at switch or uplink port group level.</maml:para> </maml:description> <command:syntax> <command:syntaxItem> <maml:name>Set-VDUplinkLacpPolicy</maml:name> <command:parameter required = "true" variableLength = "true" globbing = "false" pipelineInput = "true (ByValue)" position = "1" > <maml:name>Policy</maml:name> <maml:description> <maml:para>Specifies the Link Aggregation Control Protocol policy that you want to configure.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "true" >UplinkLacpPolicy[]</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>Enabled</maml:name> <maml:description> <maml:para>Specifies whether the Link Aggregation Control Protocol is enabled for the corresponding uplink port group or vSphere distributed switch.</maml:para> </maml:description> <command:parameterValue required="false" variableLength = "false" >Boolean</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>EnabledInherited</maml:name> <maml:description> <maml:para>Specifies whether the Enabled setting is inherited from a parent object, such as a vSphere distributed switch.</maml:para> </maml:description> <command:parameterValue required="false" variableLength = "false" >Boolean</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>Mode</maml:name> <maml:description> <maml:para>Specifies the mode of the Link Aggregation Control Protocol policy for the corresponding uplink port group or vSphere distributed switch. The value can be Active or Passive.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "false" >UplinkLacpMode</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>ModeInherited</maml:name> <maml:description> <maml:para>Specifies whether the Mode setting is inherited from a parent object, such as a vSphere distributed switch.</maml:para> </maml:description> <command:parameterValue required="false" variableLength = "false" >Boolean</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>WhatIf</maml:name> <maml:description> <maml:para>Indicates that the cmdlet is run only to display the changes that would be made and actually no objects are modified.</maml:para> </maml:description> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>Confirm</maml:name> <maml:description> <maml:para>If the value is $true, indicates that the cmdlet asks for confirmation before running. If the value is $false, the cmdlet runs without asking for user confirmation.</maml:para> </maml:description> </command:parameter> </command:syntaxItem> </command:syntax> <command:parameters> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="true (ByValue)" position="1"> <maml:name>Policy</maml:name> <maml:description> <maml:para>Specifies the Link Aggregation Control Protocol policy that you want to configure.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="true">UplinkLacpPolicy[]</command:parameterValue> <dev:type> <maml:name>UplinkLacpPolicy[]</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>Enabled</maml:name> <maml:description> <maml:para>Specifies whether the Link Aggregation Control Protocol is enabled for the corresponding uplink port group or vSphere distributed switch.</maml:para> </maml:description> <command:parameterValue required="false" variableLength="false">Boolean</command:parameterValue> <dev:type> <maml:name>Boolean</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>EnabledInherited</maml:name> <maml:description> <maml:para>Specifies whether the Enabled setting is inherited from a parent object, such as a vSphere distributed switch.</maml:para> </maml:description> <command:parameterValue required="false" variableLength="false">Boolean</command:parameterValue> <dev:type> <maml:name>Boolean</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>Mode</maml:name> <maml:description> <maml:para>Specifies the mode of the Link Aggregation Control Protocol policy for the corresponding uplink port group or vSphere distributed switch. The value can be Active or Passive.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">UplinkLacpMode</command:parameterValue> <dev:type> <maml:name>UplinkLacpMode</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>ModeInherited</maml:name> <maml:description> <maml:para>Specifies whether the Mode setting is inherited from a parent object, such as a vSphere distributed switch.</maml:para> </maml:description> <command:parameterValue required="false" variableLength="false">Boolean</command:parameterValue> <dev:type> <maml:name>Boolean</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>WhatIf</maml:name> <maml:description> <maml:para>Indicates that the cmdlet is run only to display the changes that would be made and actually no objects are modified.</maml:para> </maml:description> <dev:type> <maml:name>SwitchParameter</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>Confirm</maml:name> <maml:description> <maml:para>If the value is $true, indicates that the cmdlet asks for confirmation before running. If the value is $false, the cmdlet runs without asking for user confirmation.</maml:para> </maml:description> <dev:type> <maml:name>SwitchParameter</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> </command:parameters> <command:inputTypes> <command:inputType> <dev:type> <maml:name></maml:name> <maml:uri/> <maml:description> <maml:para></maml:para> </maml:description> </dev:type> <maml:description></maml:description> </command:inputType> </command:inputTypes> <command:returnValues> <command:returnValue> <dev:type> <maml:name>The modified VDUplinkLacpPolicy objects</maml:name> <maml:uri /> <maml:description> <maml:para></maml:para> </maml:description> </dev:type> <maml:description></maml:description> </command:returnValue> </command:returnValues> <command:terminatingErrors> </command:terminatingErrors> <command:nonTerminatingErrors> </command:nonTerminatingErrors> <maml:alertSet> <maml:title></maml:title> <maml:alert> <maml:para></maml:para> </maml:alert> </maml:alertSet> <command:examples> <command:example> <maml:title> -------------- Example 1 -------------- </maml:title> <maml:introduction> <maml:para>C:\PS></maml:para> C:\PS> </maml:introduction> <dev:code>Get-VDSwitch "MyVDSwitch" | Get-VDUplinkLacpPolicy | Set-VDUplinkLacpPolicy -Enabled $true -Mode Active</dev:code> <dev:remarks> <maml:para>Retrieves a vSphere distributed switch named "MyVDSwitch" and updates its policy to enable the Link Aggregation Control Protocol, and sets the corresponding policy mode to active.</maml:para> <maml:para></maml:para> <maml:para></maml:para> <maml:para> </maml:para> <maml:para></maml:para> </dev:remarks> <command:commandLines> <command:commandLine> <command:commandText> </command:commandText> </command:commandLine> </command:commandLines> </command:example> <command:example> <maml:title> -------------- Example 2 -------------- </maml:title> <maml:introduction> <maml:para>C:\PS></maml:para> C:\PS> </maml:introduction> <dev:code>Get-VDPortgroup "MyVDPortgroup" | Get-VDUplinkLacpPolicy | Set-VDUplinkLacpPolicy -ModeInherited $true</dev:code> <dev:remarks> <maml:para>Retrieves a distributed port group named "MyVDPortgroup" and updates its Link Aggregation Control Protocol mode based on its parent object's setting values.</maml:para> <maml:para></maml:para> <maml:para></maml:para> <maml:para> </maml:para> <maml:para></maml:para> </dev:remarks> <command:commandLines> <command:commandLine> <command:commandText> </command:commandText> </command:commandLine> </command:commandLines> </command:example> </command:examples> <maml:relatedLinks> <maml:navigationLink> <maml:linkText>Online version:</maml:linkText> <maml:uri>https://code.vmware.com/doc/preview?id=6330#/doc/Set-VDUplinkLacpPolicy.html</maml:uri> </maml:navigationLink> <maml:navigationLink> <maml:linkText>Get-VDUplinkLacpPolicy</maml:linkText> <maml:uri></maml:uri> </maml:navigationLink> </maml:relatedLinks> </command:command> <command:command xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10"> <command:details> <command:name>Set-VDUplinkTeamingPolicy</command:name> <maml:description> <maml:para>This cmdlet modifies the uplink teaming policy for distributed ports.</maml:para> </maml:description> <maml:copyright> <maml:para /> <!--Add copy right info here.--> </maml:copyright> <command:verb>Set</command:verb> <command:noun>VDUplinkTeamingPolicy</command:noun> <!--Add Dev version info here.--> <dev:version /> </command:details> <maml:description> <!--This is the Description section--> <maml:para>This cmdlet modifies the uplink teaming policy for distributed ports at switch, port group, or port level.</maml:para> </maml:description> <command:syntax> <command:syntaxItem> <maml:name>Set-VDUplinkTeamingPolicy</maml:name> <command:parameter required = "false" variableLength = "true" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>ActiveUplinkPort</maml:name> <maml:description> <maml:para>Specifies the active uplink ports used for load balancing for a corresponding vSphere distributed switch.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "true" >String[]</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>ObsoleteParameterDisableFailback</maml:name> <maml:description> <maml:para>This parameter and its alias, Failback, are obsolete and should not be used. They exist for compatibility with earlier PowerCLI versions. Use the EnableFailback parameter instead. Note that passing $false to the obsolete Failback parameter is equivalent to passing $true to the new EnableFailback parameter and the reverse.</maml:para> </maml:description> <command:parameterValue required="false" variableLength = "false" >Boolean</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>EnableFailback</maml:name> <maml:description> <maml:para>Specifies whether to use failback when restoring links. If, for example, the explicit link order is (vmnic9, vmnic0), and vmnic9 goes down, vmnic0 is activated. However, when vmnic9 comes back up, if EnableFailback is set to $true, vmnic9 is restored as specified in the explicit order. If EnableFailback is set to $false, vmnic0 continues to be used and vmnic9 remains on standby. This parameter replaces the obsolete ObsoleteParameterDisableFailback parameter, which is an alias fort the Failback parameter. Note that passing $false to the obsolete Failback parameter is equivalent to passing $true to the new EnableFailback parameter and the reverse.</maml:para> </maml:description> <command:parameterValue required="false" variableLength = "false" >Boolean</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>FailbackInherited</maml:name> <maml:description> <maml:para>Specifies whether the Failback setting is inherited from a parent object, such as a distributed port group or switch.</maml:para> </maml:description> <command:parameterValue required="false" variableLength = "false" >Boolean</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>FailoverDetectionPolicy</maml:name> <maml:description> <maml:para>Specifies the method to use for failover detection for the corresponding distributed port, port group, or switch. The value can be LinkStatus or BeaconProbing.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "false" >NetworkFailoverDetectionPolicy</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>FailoverDetectionPolicyInherited</maml:name> <maml:description> <maml:para>Specifies whether the FailoverDetectionPolicy setting is inherited from a parent object, such as a distributed port group or switch.</maml:para> </maml:description> <command:parameterValue required="false" variableLength = "false" >Boolean</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>LoadBalancingPolicy</maml:name> <maml:description> <maml:para>Specifies the load balancing policy for the corresponding distributed port, port group, or switch. The value can be LoadBalanceIP, LoadBalanceLoadBased, LoadBalanceSrcMac, LoadBalanceSrcId, or ExplicitFailover.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "false" >LoadBalancingPolicy</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>LoadBalancingPolicyInherited</maml:name> <maml:description> <maml:para>Specifies whether the LoadBalancingPolicy setting is inherited from a parent object, such as a distributed port group or switch.</maml:para> </maml:description> <command:parameterValue required="false" variableLength = "false" >Boolean</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>NotifySwitches</maml:name> <maml:description> <maml:para>Specifies whether to notify switches in the case of failover.</maml:para> </maml:description> <command:parameterValue required="false" variableLength = "false" >Boolean</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>NotifySwitchesInherited</maml:name> <maml:description> <maml:para>Specifies whether the NotifySwitches setting is inherited from a parent object, such as a distributed port group or switch.</maml:para> </maml:description> <command:parameterValue required="false" variableLength = "false" >Boolean</command:parameterValue> </command:parameter> <command:parameter required = "true" variableLength = "true" globbing = "false" pipelineInput = "true (ByValue)" position = "1" > <maml:name>Policy</maml:name> <maml:description> <maml:para>Specifies the uplink teaming policy that you want to configure.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "true" >UplinkTeamingPolicy[]</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "true" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>StandbyUplinkPort</maml:name> <maml:description> <maml:para>Specifies the standby uplink ports for the corresponding vSphere distributed switch.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "true" >String[]</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "true" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>UnusedUplinkPort</maml:name> <maml:description> <maml:para>Specifies the unused uplink ports for the corresponding vSphere distributed switch.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "true" >String[]</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>UplinkPortOrderInherited</maml:name> <maml:description> <maml:para>Specifies whether the UplinkPortOrder setting is inherited from a parent object, such as a distributed port group or switch.</maml:para> </maml:description> <command:parameterValue required="false" variableLength = "false" >Boolean</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>WhatIf</maml:name> <maml:description> <maml:para>Indicates that the cmdlet is run only to display the changes that would be made and actually no objects are modified.</maml:para> </maml:description> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>Confirm</maml:name> <maml:description> <maml:para>If the value is $true, indicates that the cmdlet asks for confirmation before running. If the value is $false, the cmdlet runs without asking for user confirmation.</maml:para> </maml:description> </command:parameter> </command:syntaxItem> </command:syntax> <command:parameters> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="false" position="named"> <maml:name>ActiveUplinkPort</maml:name> <maml:description> <maml:para>Specifies the active uplink ports used for load balancing for a corresponding vSphere distributed switch.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="true">String[]</command:parameterValue> <dev:type> <maml:name>String[]</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>ObsoleteParameterDisableFailback</maml:name> <maml:description> <maml:para>This parameter and its alias, Failback, are obsolete and should not be used. They exist for compatibility with earlier PowerCLI versions. Use the EnableFailback parameter instead. Note that passing $false to the obsolete Failback parameter is equivalent to passing $true to the new EnableFailback parameter and the reverse.</maml:para> </maml:description> <command:parameterValue required="false" variableLength="false">Boolean</command:parameterValue> <dev:type> <maml:name>Boolean</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>EnableFailback</maml:name> <maml:description> <maml:para>Specifies whether to use failback when restoring links. If, for example, the explicit link order is (vmnic9, vmnic0), and vmnic9 goes down, vmnic0 is activated. However, when vmnic9 comes back up, if EnableFailback is set to $true, vmnic9 is restored as specified in the explicit order. If EnableFailback is set to $false, vmnic0 continues to be used and vmnic9 remains on standby. This parameter replaces the obsolete ObsoleteParameterDisableFailback parameter, which is an alias fort the Failback parameter. Note that passing $false to the obsolete Failback parameter is equivalent to passing $true to the new EnableFailback parameter and the reverse.</maml:para> </maml:description> <command:parameterValue required="false" variableLength="false">Boolean</command:parameterValue> <dev:type> <maml:name>Boolean</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>FailbackInherited</maml:name> <maml:description> <maml:para>Specifies whether the Failback setting is inherited from a parent object, such as a distributed port group or switch.</maml:para> </maml:description> <command:parameterValue required="false" variableLength="false">Boolean</command:parameterValue> <dev:type> <maml:name>Boolean</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>FailoverDetectionPolicy</maml:name> <maml:description> <maml:para>Specifies the method to use for failover detection for the corresponding distributed port, port group, or switch. The value can be LinkStatus or BeaconProbing.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">NetworkFailoverDetectionPolicy</command:parameterValue> <dev:type> <maml:name>NetworkFailoverDetectionPolicy</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>FailoverDetectionPolicyInherited</maml:name> <maml:description> <maml:para>Specifies whether the FailoverDetectionPolicy setting is inherited from a parent object, such as a distributed port group or switch.</maml:para> </maml:description> <command:parameterValue required="false" variableLength="false">Boolean</command:parameterValue> <dev:type> <maml:name>Boolean</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>LoadBalancingPolicy</maml:name> <maml:description> <maml:para>Specifies the load balancing policy for the corresponding distributed port, port group, or switch. The value can be LoadBalanceIP, LoadBalanceLoadBased, LoadBalanceSrcMac, LoadBalanceSrcId, or ExplicitFailover.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">LoadBalancingPolicy</command:parameterValue> <dev:type> <maml:name>LoadBalancingPolicy</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>LoadBalancingPolicyInherited</maml:name> <maml:description> <maml:para>Specifies whether the LoadBalancingPolicy setting is inherited from a parent object, such as a distributed port group or switch.</maml:para> </maml:description> <command:parameterValue required="false" variableLength="false">Boolean</command:parameterValue> <dev:type> <maml:name>Boolean</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>NotifySwitches</maml:name> <maml:description> <maml:para>Specifies whether to notify switches in the case of failover.</maml:para> </maml:description> <command:parameterValue required="false" variableLength="false">Boolean</command:parameterValue> <dev:type> <maml:name>Boolean</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>NotifySwitchesInherited</maml:name> <maml:description> <maml:para>Specifies whether the NotifySwitches setting is inherited from a parent object, such as a distributed port group or switch.</maml:para> </maml:description> <command:parameterValue required="false" variableLength="false">Boolean</command:parameterValue> <dev:type> <maml:name>Boolean</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="true (ByValue)" position="1"> <maml:name>Policy</maml:name> <maml:description> <maml:para>Specifies the uplink teaming policy that you want to configure.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="true">UplinkTeamingPolicy[]</command:parameterValue> <dev:type> <maml:name>UplinkTeamingPolicy[]</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="false" position="named"> <maml:name>StandbyUplinkPort</maml:name> <maml:description> <maml:para>Specifies the standby uplink ports for the corresponding vSphere distributed switch.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="true">String[]</command:parameterValue> <dev:type> <maml:name>String[]</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="true" globbing="false" pipelineInput="false" position="named"> <maml:name>UnusedUplinkPort</maml:name> <maml:description> <maml:para>Specifies the unused uplink ports for the corresponding vSphere distributed switch.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="true">String[]</command:parameterValue> <dev:type> <maml:name>String[]</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>UplinkPortOrderInherited</maml:name> <maml:description> <maml:para>Specifies whether the UplinkPortOrder setting is inherited from a parent object, such as a distributed port group or switch.</maml:para> </maml:description> <command:parameterValue required="false" variableLength="false">Boolean</command:parameterValue> <dev:type> <maml:name>Boolean</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>WhatIf</maml:name> <maml:description> <maml:para>Indicates that the cmdlet is run only to display the changes that would be made and actually no objects are modified.</maml:para> </maml:description> <dev:type> <maml:name>SwitchParameter</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>Confirm</maml:name> <maml:description> <maml:para>If the value is $true, indicates that the cmdlet asks for confirmation before running. If the value is $false, the cmdlet runs without asking for user confirmation.</maml:para> </maml:description> <dev:type> <maml:name>SwitchParameter</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> </command:parameters> <command:inputTypes> <command:inputType> <dev:type> <maml:name></maml:name> <maml:uri/> <maml:description> <maml:para></maml:para> </maml:description> </dev:type> <maml:description></maml:description> </command:inputType> </command:inputTypes> <command:returnValues> <command:returnValue> <dev:type> <maml:name>The modified UplinkTeamingPolicy objects</maml:name> <maml:uri /> <maml:description> <maml:para></maml:para> </maml:description> </dev:type> <maml:description></maml:description> </command:returnValue> </command:returnValues> <command:terminatingErrors> </command:terminatingErrors> <command:nonTerminatingErrors> </command:nonTerminatingErrors> <maml:alertSet> <maml:title></maml:title> <maml:alert> <maml:para></maml:para> </maml:alert> </maml:alertSet> <command:examples> <command:example> <maml:title> -------------- Example 1 -------------- </maml:title> <maml:introduction> <maml:para>C:\PS></maml:para> C:\PS> </maml:introduction> <dev:code>$activePortsList = "Port0" $standbyPortsList = "Port1", "Port2" Get-VDSwitch "MyVDSwitch" | Get-VDPortgroup | Get-VDUplinkTeamingPolicy | Set-VDUplinkTeamingPolicy -ActiveUplinkPort $activePortsList -StandbyUplinkPort $standbyPortsList</dev:code> <dev:remarks> <maml:para>Retrieves all distributed port groups from a vSphere distributed switch named "MyVDSwitch" and updates their teaming policies with information about the active and standby uplinks that will be used when the adapter connectivity is up or down.</maml:para> <maml:para></maml:para> <maml:para></maml:para> <maml:para> </maml:para> <maml:para></maml:para> </dev:remarks> <command:commandLines> <command:commandLine> <command:commandText> </command:commandText> </command:commandLine> </command:commandLines> </command:example> <command:example> <maml:title> -------------- Example 2 -------------- </maml:title> <maml:introduction> <maml:para>C:\PS></maml:para> C:\PS> </maml:introduction> <dev:code>Get-VDPortgroup "MyVDPortgroup" | Get-VDUplinkTeamingPolicy | Set-VDUplinkTeamingPolicy -NotifySwitches $true -FailoverDetectionPolicy LinkStatus</dev:code> <dev:remarks> <maml:para>Updates the teaming policy of a distributed port group named "MyVDPortgroup" with a link status method for failover detection and with the ability to notify the corresponding distributed switch when any adapter failover occurs.</maml:para> <maml:para></maml:para> <maml:para></maml:para> <maml:para> </maml:para> <maml:para></maml:para> </dev:remarks> <command:commandLines> <command:commandLine> <command:commandText> </command:commandText> </command:commandLine> </command:commandLines> </command:example> <command:example> <maml:title> -------------- Example 3 -------------- </maml:title> <maml:introduction> <maml:para>C:\PS></maml:para> C:\PS> </maml:introduction> <dev:code>Get-VDSwitch "MyVDSwitch" | Get-VDPort "Port2" | Get-VDUplinkTeamingPolicy | Set-VDUplinkTeamingPolicy -LoadBalancingPolicy LoadBalanceSrcId -FailBack $true</dev:code> <dev:remarks> <maml:para>Updates the uplink teaming policy of a distributed port named "Port2" inside the "MyVDSwitch" vSphere distributed switch to enable failback and to choose an uplink based on the current loads of physical NICs.</maml:para> <maml:para></maml:para> <maml:para></maml:para> <maml:para> </maml:para> <maml:para></maml:para> </dev:remarks> <command:commandLines> <command:commandLine> <command:commandText> </command:commandText> </command:commandLine> </command:commandLines> </command:example> </command:examples> <maml:relatedLinks> <maml:navigationLink> <maml:linkText>Online version:</maml:linkText> <maml:uri>https://code.vmware.com/doc/preview?id=6330#/doc/Set-VDUplinkTeamingPolicy.html</maml:uri> </maml:navigationLink> <maml:navigationLink> <maml:linkText>Get-VDUplinkTeamingPolicy</maml:linkText> <maml:uri></maml:uri> </maml:navigationLink> </maml:relatedLinks> </command:command> <command:command xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10"> <command:details> <command:name>Set-VDVlanConfiguration</command:name> <maml:description> <maml:para>This cmdlet modifies the virtual distributed port's VLAN configuration.</maml:para> </maml:description> <maml:copyright> <maml:para /> <!--Add copy right info here.--> </maml:copyright> <command:verb>Set</command:verb> <command:noun>VDVlanConfiguration</command:noun> <!--Add Dev version info here.--> <dev:version /> </command:details> <maml:description> <!--This is the Description section--> <maml:para>This cmdlet modifies the virtual distributed port's VLAN configuration. For vSphere distributed switch and port group parameter sets, the cmdlet modifies the respective default port configuration.</maml:para> </maml:description> <command:syntax> <command:syntaxItem> <maml:name>Set-VDVlanConfiguration</maml:name> <command:parameter required = "true" variableLength = "true" globbing = "false" pipelineInput = "true (ByValue)" position = "named" > <maml:name>VDPortgroup</maml:name> <maml:description> <maml:para>Specifies the port group whose default VLAN port configuration you want to modify.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "true" >VDPortgroup[]</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>DisableVlan</maml:name> <maml:description> <maml:para>Sets the VLAN type to None.</maml:para> </maml:description> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>VlanId</maml:name> <maml:description> <maml:para>Specifies a new VLAN ID. The VLAN IDs of 0 and 4095 are reserved and cannot be used.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "false" >Int32</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>VlanTrunkRange</maml:name> <maml:description> <maml:para>Specifies a new VLAN trunk range. Valid values are strings representing ranges of IDs. For example, "1-4, 6, 8-9".</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "false" >VlanRangeList</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>PrivateVlanId</maml:name> <maml:description> <maml:para>Specifies the secondary VLAN ID of a vSphere distributed switch's private VLAN configuration entry. The VLAN IDs of 0 and 4095 are reserved and cannot be used.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "false" >Int32</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>WhatIf</maml:name> <maml:description> <maml:para>Indicates that the cmdlet is run only to display the changes that would be made and actually no objects are modified.</maml:para> </maml:description> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>Confirm</maml:name> <maml:description> <maml:para>If the value is $true, indicates that the cmdlet asks for confirmation before running. If the value is $false, the cmdlet runs without asking for user confirmation.</maml:para> </maml:description> </command:parameter> </command:syntaxItem> <command:syntaxItem> <maml:name>Set-VDVlanConfiguration</maml:name> <command:parameter required = "true" variableLength = "true" globbing = "false" pipelineInput = "true (ByValue)" position = "named" > <maml:name>VDSwitch</maml:name> <maml:description> <maml:para>Specifies the vSphere distributed switch whose default VLAN port configuration you want to modify.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "true" >VDSwitch[]</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>DisableVlan</maml:name> <maml:description> <maml:para>Sets the VLAN type to None.</maml:para> </maml:description> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>VlanId</maml:name> <maml:description> <maml:para>Specifies a new VLAN ID. The VLAN IDs of 0 and 4095 are reserved and cannot be used.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "false" >Int32</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>VlanTrunkRange</maml:name> <maml:description> <maml:para>Specifies a new VLAN trunk range. Valid values are strings representing ranges of IDs. For example, "1-4, 6, 8-9".</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "false" >VlanRangeList</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>PrivateVlanId</maml:name> <maml:description> <maml:para>Specifies the secondary VLAN ID of a vSphere distributed switch's private VLAN configuration entry. The VLAN IDs of 0 and 4095 are reserved and cannot be used.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "false" >Int32</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>WhatIf</maml:name> <maml:description> <maml:para>Indicates that the cmdlet is run only to display the changes that would be made and actually no objects are modified.</maml:para> </maml:description> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>Confirm</maml:name> <maml:description> <maml:para>If the value is $true, indicates that the cmdlet asks for confirmation before running. If the value is $false, the cmdlet runs without asking for user confirmation.</maml:para> </maml:description> </command:parameter> </command:syntaxItem> <command:syntaxItem> <maml:name>Set-VDVlanConfiguration</maml:name> <command:parameter required = "true" variableLength = "true" globbing = "false" pipelineInput = "true (ByValue)" position = "named" > <maml:name>VDPort</maml:name> <maml:description> <maml:para>Specifies the port whose VLAN configuration you want to modify.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "true" >VDPort[]</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>DisableVlan</maml:name> <maml:description> <maml:para>Sets the VLAN type to None.</maml:para> </maml:description> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>VlanId</maml:name> <maml:description> <maml:para>Specifies a new VLAN ID. The VLAN IDs of 0 and 4095 are reserved and cannot be used.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "false" >Int32</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>VlanTrunkRange</maml:name> <maml:description> <maml:para>Specifies a new VLAN trunk range. Valid values are strings representing ranges of IDs. For example, "1-4, 6, 8-9".</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "false" >VlanRangeList</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>PrivateVlanId</maml:name> <maml:description> <maml:para>Specifies the secondary VLAN ID of a vSphere distributed switch's private VLAN configuration entry. The VLAN IDs of 0 and 4095 are reserved and cannot be used.</maml:para> </maml:description> <command:parameterValue required="true" variableLength = "false" >Int32</command:parameterValue> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>WhatIf</maml:name> <maml:description> <maml:para>Indicates that the cmdlet is run only to display the changes that would be made and actually no objects are modified.</maml:para> </maml:description> </command:parameter> <command:parameter required = "false" variableLength = "false" globbing = "false" pipelineInput = "false" position = "named" > <maml:name>Confirm</maml:name> <maml:description> <maml:para>If the value is $true, indicates that the cmdlet asks for confirmation before running. If the value is $false, the cmdlet runs without asking for user confirmation.</maml:para> </maml:description> </command:parameter> </command:syntaxItem> </command:syntax> <command:parameters> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="true (ByValue)" position="named"> <maml:name>VDPortgroup</maml:name> <maml:description> <maml:para>Specifies the port group whose default VLAN port configuration you want to modify.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="true">VDPortgroup[]</command:parameterValue> <dev:type> <maml:name>VDPortgroup[]</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>DisableVlan</maml:name> <maml:description> <maml:para>Sets the VLAN type to None.</maml:para> </maml:description> <dev:type> <maml:name>SwitchParameter</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>VlanId</maml:name> <maml:description> <maml:para>Specifies a new VLAN ID. The VLAN IDs of 0 and 4095 are reserved and cannot be used.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">Int32</command:parameterValue> <dev:type> <maml:name>Int32</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>VlanTrunkRange</maml:name> <maml:description> <maml:para>Specifies a new VLAN trunk range. Valid values are strings representing ranges of IDs. For example, "1-4, 6, 8-9".</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">VlanRangeList</command:parameterValue> <dev:type> <maml:name>VlanRangeList</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>PrivateVlanId</maml:name> <maml:description> <maml:para>Specifies the secondary VLAN ID of a vSphere distributed switch's private VLAN configuration entry. The VLAN IDs of 0 and 4095 are reserved and cannot be used.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="false">Int32</command:parameterValue> <dev:type> <maml:name>Int32</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>WhatIf</maml:name> <maml:description> <maml:para>Indicates that the cmdlet is run only to display the changes that would be made and actually no objects are modified.</maml:para> </maml:description> <dev:type> <maml:name>SwitchParameter</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="false" variableLength="false" globbing="false" pipelineInput="false" position="named"> <maml:name>Confirm</maml:name> <maml:description> <maml:para>If the value is $true, indicates that the cmdlet asks for confirmation before running. If the value is $false, the cmdlet runs without asking for user confirmation.</maml:para> </maml:description> <dev:type> <maml:name>SwitchParameter</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="true (ByValue)" position="named"> <maml:name>VDSwitch</maml:name> <maml:description> <maml:para>Specifies the vSphere distributed switch whose default VLAN port configuration you want to modify.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="true">VDSwitch[]</command:parameterValue> <dev:type> <maml:name>VDSwitch[]</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> <command:parameter required="true" variableLength="true" globbing="false" pipelineInput="true (ByValue)" position="named"> <maml:name>VDPort</maml:name> <maml:description> <maml:para>Specifies the port whose VLAN configuration you want to modify.</maml:para> </maml:description> <command:parameterValue required="true" variableLength="true">VDPort[]</command:parameterValue> <dev:type> <maml:name>VDPort[]</maml:name> <maml:uri/> </dev:type> <dev:defaultValue></dev:defaultValue> </command:parameter> </command:parameters> <command:inputTypes> <command:inputType> <dev:type> <maml:name></maml:name> <maml:uri/> <maml:description> <maml:para></maml:para> </maml:description> </dev:type> <maml:description></maml:description> </command:inputType> </command:inputTypes> <command:returnValues> <command:returnValue> <dev:type> <maml:name>The updated entity - VDPort, VDPortgroup, or VDSwitch</maml:name> <maml:uri /> <maml:description> <maml:para></maml:para> </maml:description> </dev:type> <maml:description></maml:description> </command:returnValue> </command:returnValues> <command:terminatingErrors> </command:terminatingErrors> <command:nonTerminatingErrors> </command:nonTerminatingErrors> <maml:alertSet> <maml:title></maml:title> <maml:alert> <maml:para></maml:para> </maml:alert> </maml:alertSet> <command:examples> <command:example> <maml:title> -------------- Example 1 -------------- </maml:title> <maml:introduction> <maml:para>C:\PS></maml:para> C:\PS> </maml:introduction> <dev:code>Get-VDSwitch "MyVDSwitch" | Get-VDPort -ActiveOnly | Set-VDVlanConfiguration -PrivateVlanId 4</dev:code> <dev:remarks> <maml:para>Assigns all active ports of a specific vSphere distributed switch named "MyVDSwitch" to a private VLAN with ID "4".</maml:para> <maml:para></maml:para> <maml:para></maml:para> <maml:para> </maml:para> <maml:para></maml:para> </dev:remarks> <command:commandLines> <command:commandLine> <command:commandText> </command:commandText> </command:commandLine> </command:commandLines> </command:example> <command:example> <maml:title> -------------- Example 2 -------------- </maml:title> <maml:introduction> <maml:para>C:\PS></maml:para> C:\PS> </maml:introduction> <dev:code>Get-VDPortgroup "MyVDPorgroup" | Get-VDPort | Set-VDVlanConfiguration -VlanId 3</dev:code> <dev:remarks> <maml:para>Assigns all ports of a specific distributed port group named "MyVDPorgroup" to a VLAN with ID "3".</maml:para> <maml:para></maml:para> <maml:para></maml:para> <maml:para> </maml:para> <maml:para></maml:para> </dev:remarks> <command:commandLines> <command:commandLine> <command:commandText> </command:commandText> </command:commandLine> </command:commandLines> </command:example> </command:examples> <maml:relatedLinks> <maml:navigationLink> <maml:linkText>Online version:</maml:linkText> <maml:uri>https://code.vmware.com/doc/preview?id=6330#/doc/Set-VDVlanConfiguration.html</maml:uri> </maml:navigationLink> </maml:relatedLinks> </command:command> </helpItems> |