Test-NetStack.psm1
|
using module .\helpers\prerequisites.psm1 using module .\helpers\internal.psm1 using module .\helpers\icmp.psm1 using module .\helpers\tcp.psm1 using module .\helpers\ndk.psm1 Function Test-NetStack { <# .SYNOPSIS Test-NetStack performs ICMP, TCP, and RDMA traffic testing of networks. Test-NetStack can help you identify misconfigured networks, hotspots, asymmetry across cluster nodes, and more. .DESCRIPTION Test-NetStack performs ICMP, TCP, and RDMA traffic testing of networks. Test-NetStack can help you identify misconfigured networks, hotspots, asymmetry across cluster nodes, and more. Specifically, Test-NetStack: - Performs connectivity mapping across a cluster, specific nodes, or IP targets - Stage1: ICMP Connectivity, Reliability, and PMTUD - Stage2: TCP Stress 1:1 - Stage3: RDMA Connectivity - Stage4: RDMA Stress 1:1 - Stage5: RDMA Stress N:1 - Stage6: RDMA Stress N:N .PARAMETER Nodes - Specifies the machines by DNS Name to test. - PowerShell remoting without credentials is required; no credentials are stored or entered into Test-NetStack. - Minimum 2 nodes, maximum of 16 nodes. If part of a failover cluster, and neither the IPTarget or Node parameters are specified, get-clusternode will be run to attempt to gather nodenames. .PARAMETER Stage List of stages that specifies the tests to be run by Test-NetStack. By default, all stages will be run. Tests will always occur in order of lowest stage first. It is highly recommended that you always run the preceeding tests. Currently included stages for Test-NetStack: - Stage1: ICMP Connectivity, Reliability, and PMTUD - Stage2: TCP Stress 1:1 - Stage3: RDMA Connectivity - Stage4: RDMA Stress 1:1 - Stage5: RDMA Stress N:1 - Stage6: RDMA Stress N:N .PARAMETER EnableFirewallRules * This command is best-effort and may fail for a variety of reasons * Works with: - The Windows Firewall - The built-in firewall rules for ICMP, WinRM, and iWARP - CTSTraffic rules (by application path) needed for Stage 2 Note: if you upgrade the module version, firewall rules should be revoked, then re-enabled. .PARAMETER RevokeFirewallRules * This command is best-effort and may fail for a variety of reasons * Works with: - The Windows Firewall - The built-in firewall rules for ICMP and iWARP - CTSTraffic rules defined by the EnableFirewallRules parameter - Will not disable WinRM .PARAMETER OnlyPrerequisites Use if you want to review the connectivity map detection. This is useful if you're troubleshooting why some networks are or are not included in testing. .PARAMETER OnlyConnectivityMap Use if you want to review the connectivity map detection. This is useful if you're troubleshooting why some networks are or are not included in testing. .PARAMETER LogPath Defines the path for the logfile. By default, this will be in the path of the module under the results folder .PARAMETER ContinueOnFailure By default, Test-NetStack will stop processing later stages if a failure is incurred during an earlier stage. This switch will continue testing later stages. The following lists the dependent stages: - Stage 1 -> Stage 2 - Stage 3 -> Stage 4 -> Stage 5 -> Stage 6 .EXAMPLE Run all tests in the local node's failover cluster. Review results from Stage2 and Stage6 $Results = Test-NetStack $Results.Stage2 $Results.Stage6 .EXAMPLE 4-domain joined nodes; all tests run $Results = Test-NetStack -Nodes 'AzStackHCI01', 'AzStackHCI02', 'AzStackHCI03', AzStackHCI04' .EXAMPLE 2-node tests; ICMP and TCP tests only. Review results from Stage1 and Stage2 $Results = Test-NetStack -MachineList 'AzStackHCI01', 'AzStackHCI02' -Stage 1, 2 $Results.Stage1 $Results.Stage2 .NOTES Author: Windows Core Networking team @ Microsoft Please file issues on GitHub @ GitHub.com/Microsoft/Test-NetStack .LINK Networking Blog : https://aka.ms/MSFTNetworkBlog HCI Host Guidance : https://docs.microsoft.com/en-us/azure-stack/hci/deploy/network-atc #> [CmdletBinding(DefaultParameterSetName = 'FullNodeMap')] param ( [Parameter(Mandatory = $false, ParameterSetName = 'FullNodeMap' , position = 0)] [Parameter(Mandatory = $false, ParameterSetName = 'OnlyPrereqNodes' , position = 0)] [Parameter(Mandatory = $false, ParameterSetName = 'OnlyConMapNodes' , position = 0)] [Parameter(Mandatory = $false, ParameterSetName = 'RevokeFWRulesNodes', position = 0)] [ValidateScript({[System.Uri]::CheckHostName($_) -eq 'DNS'})] [ValidateCount(2, 16)] [String[]] $Nodes, [Parameter(Mandatory = $true, ParameterSetName = 'IPAddress' , position = 0)] [Parameter(Mandatory = $true, ParameterSetName = 'OnlyPrereqIPTarget' , position = 0)] [Parameter(Mandatory = $true, ParameterSetName = 'OnlyConMapIPTarget' , position = 0)] [Parameter(Mandatory = $true, ParameterSetName = 'RevokeFWRulesIPTarget', position = 0)] [ValidateCount(2, 16)] [IPAddress[]] $IPTarget, [Parameter(Mandatory = $false, ParameterSetName = 'FullNodeMap' , position = 1)] [Parameter(Mandatory = $false, ParameterSetName = 'IPAddress' , position = 1)] [Parameter(Mandatory = $false, ParameterSetName = 'OnlyPrereqNodes' , position = 1)] [Parameter(Mandatory = $false, ParameterSetName = 'OnlyPrereqIPTarget' , position = 1)] [Parameter(Mandatory = $false, ParameterSetName = 'RevokeFWRulesNodes' , position = 1)] [Parameter(Mandatory = $false, ParameterSetName = 'RevokeFWRulesIPTarget', position = 1)] [ValidateSet('1', '2', '3', '4', '5', '6')] [Int32[]] $Stage = @('1', '2', '3', '4', '5', '6'), [Parameter(Mandatory = $false, ParameterSetName = 'FullNodeMap', position = 2)] [Parameter(Mandatory = $false, ParameterSetName = 'IPAddress' , position = 2)] [Switch] $EnableFirewallRules = $false, [Parameter(Mandatory = $true, ParameterSetName = 'RevokeFWRulesNodes' , position = 2)] [Parameter(Mandatory = $true, ParameterSetName = 'RevokeFWRulesIPTarget', position = 2)] [Switch] $RevokeFirewallRules = $false, [Parameter(Mandatory = $true, ParameterSetName = 'OnlyPrereqNodes' , position = 2)] [Parameter(Mandatory = $true, ParameterSetName = 'OnlyPrereqIPTarget', position = 2)] [Switch] $OnlyPrerequisites = $false, [Parameter(Mandatory = $true, ParameterSetName = 'OnlyConMapNodes' , position = 2)] [Parameter(Mandatory = $true, ParameterSetName = 'OnlyConMapIPTarget', position = 2)] [Switch] $OnlyConnectivityMap = $false, [Parameter(Mandatory = $false, ParameterSetName = 'FullNodeMap', position = 3)] [Parameter(Mandatory = $false, ParameterSetName = 'IPAddress' , position = 3)] [Parameter(Mandatory = $false)] [switch] $ContinueOnFailure = $false, [Parameter(Mandatory = $false)] [String] $LogPath = "$(Join-Path -Path $((Get-Module -Name Test-Netstack -ListAvailable | Select-Object -First 1).ModuleBase) -ChildPath "Results\NetStackResults-$(Get-Date -f yyyy-MM-dd-HHmmss).txt")" ) $Global:ProgressPreference = 'SilentlyContinue' $LogFileParentPath = Split-Path -Path $LogPath -Parent -ErrorAction SilentlyContinue if (-not (Test-Path $LogFileParentPath -ErrorAction SilentlyContinue)) { $null = New-Item -Path $LogFileParentPath -ItemType Directory -Force -ErrorAction SilentlyContinue } $LogFile = New-Item -Path $LogPath -ItemType File -Force -ErrorAction SilentlyContinue "Starting Test-NetStack - $([System.DateTime]::Now)`r`n" | Out-File $LogFile -Append -Encoding utf8 -Width 2000 # Each stages adds their results to this and is eventually returned by this function $NetStackResults = New-Object -TypeName psobject # Since FullNodeMap is the default, we can check if the customer entered Nodes or IPTarget. If neither, check for cluster membership, and use that for the nodes. if ( $PsCmdlet.ParameterSetName -eq 'FullNodeMap' -or $PsCmdlet.ParameterSetName -eq 'OnlyPrereqNodes' -or $PsCmdlet.ParameterSetName -eq 'OnlyConMapNodes' -or $PsCmdlet.ParameterSetName -eq 'RevokeFWRulesNodes' ) { if (-not($PSBoundParameters.ContainsKey('Nodes'))) { try { $Nodes = (Get-ClusterNode -ErrorAction SilentlyContinue -WarningAction SilentlyContinue).Name } catch { Write-Host 'To run this cmdlet without parameters, join a cluster then try again. Otherwise, specify the Nodes or IPTarget parameters' -ForegroundColor Red "To run this cmdlet without parameters, join a cluster then try again. Otherwise, specify the Nodes or IPTarget parameters." | Out-File $LogFile -Append -Encoding utf8 -Width 2000 break } } If ($EnableFirewallRules) { $TargetInfo, $PrereqStatus = Test-NetStackPrerequisites -Nodes $Nodes -Stage $Stage -EnableFirewallRules } else { $TargetInfo, $PrereqStatus = Test-NetStackPrerequisites -Nodes $Nodes -Stage $Stage } } else { # Function returns both the target information and the results of the prerequisite testing If ($EnableFirewallRules) { $TargetInfo, $PrereqStatus = Test-NetStackPrerequisites -IPTarget $IPTarget -Stage $Stage -EnableFirewallRules } else { $TargetInfo, $PrereqStatus = Test-NetStackPrerequisites -IPTarget $IPTarget -Stage $Stage } } if ( $RevokeFirewallRules ) { if ($IPTarget) { $Targets = $IPTarget } else { $Targets = $Nodes } Revoke-FirewallRules -Stage $Stage -Targets $Targets Return } $NetStackResults | Add-Member -MemberType NoteProperty -Name Prerequisites -Value $TargetInfo Remove-Variable TargetInfo -ErrorAction SilentlyContinue "Prerequisite Test Results" | Out-File $LogFile -Append -Encoding utf8 -Width 2000 $NetStackResults.Prerequisites | ft * | Out-File $LogFile -Append -Encoding utf8 -Width 2000 "####################################`r`n" | Out-File $LogFile -Append -Encoding utf8 -Width 2000 if ($OnlyPrerequisites) { return $NetStackResults } elseif ($false -in $PrereqStatus) { "Prerequsite tests have failed. Review the NetStack results below for more details." | Out-File $LogFile -Append -Encoding utf8 -Width 2000 $NetStackResults.Prerequisites | ft * | Out-File $LogFile -Append -Encoding utf8 -Width 2000 throw "Prerequsite tests have failed. Review the NetStack results for more details." } #region Connectivity Maps if ($Nodes) { $Mapping = Get-ConnectivityMapping -Nodes $Nodes } else { $Mapping = Get-ConnectivityMapping -IPTarget $IPTarget } $TestableNetworks = Get-TestableNetworksFromMapping -Mapping $Mapping $DisqualifiedNetworks = Get-DisqualifiedNetworksFromMapping -Mapping $Mapping # If at least one note property doesn't exist, then no disqualified networks were identified if (($DisqualifiedNetworks | Get-Member -MemberType NoteProperty).Count) { "Disqualified Networks" | Out-File $LogFile -Append -Encoding utf8 -Width 2000 $DisqualifiedNetworks.PSObject.Properties | ForEach-Object { $DisqualificationCategory = $_ "`r`nDisqualification Category: $($DisqualificationCategory.Name)" | Out-File $LogFile -Append -Encoding utf8 -Width 2000 $DisqualificationCategory.Value | ForEach-Object { $_.Name | Out-File $LogFile -Append -Encoding utf8 -Width 2000 $_.Group | ft * | Out-File $LogFile -Append -Encoding utf8 -Width 2000 } } "####################################`r`n" | Out-File $LogFile -Append -Encoding utf8 -Width 2000 $NetStackResults | Add-Member -MemberType NoteProperty -Name DisqualifiedNetworks -Value $DisqualifiedNetworks } else { Remove-Variable -Name DisqualifiedNetworks -ErrorAction SilentlyContinue } $NetStackResults | Add-Member -MemberType NoteProperty -Name TestableNetworks -Value $TestableNetworks if ($TestableNetworks -eq 'None Available' -and (-not($OnlyConnectivityMap))) { Write-Error 'No Testable Networks Found. Aborting Test-NetStack.' "No Testable Networks Found. Aborting Test-NetStack." | Out-File $LogFile -Append -Encoding utf8 -Width 2000 return $NetStackResults } "Testable Networks`r`n" | Out-File $LogFile -Append -Encoding utf8 -Width 2000 $TestableNetworks | ForEach-Object { $_.Values | Out-File $LogFile -Append -Encoding utf8 -Width 2000 $_.Group | ft * | Out-File $LogFile -Append -Encoding utf8 -Width 2000 } "####################################`r`n" | Out-File $LogFile -Append -Encoding utf8 -Width 2000 if ($OnlyConnectivityMap) { return $NetStackResults } #endregion Connectivity Maps $runspaceGroups = Get-RunspaceGroups -TestableNetworks $TestableNetworks # Defines the stage requirements - internal.psm1 $Definitions = [Analyzer]::new() $ResultsSummary = New-Object -TypeName psobject $StageFailures = 0 $MaxRunspaces = [int]$env:NUMBER_OF_PROCESSORS * 2 Switch ( $Stage | Sort-Object ) { '1' { # ICMP Connectivity, Reliability, and PMTUD $thisStage = $_ Write-Host "Beginning Stage: $thisStage - Connectivity and PMTUD - $([System.DateTime]::Now)" "Stage 1`r`n" | Out-File $LogFile -Append -Encoding utf8 -Width 2000 "Console Output" | Out-File $LogFile -Append -Encoding utf8 -Width 2000 "Beginning Stage: $thisStage - Connectivity and PMTUD - $([System.DateTime]::Now)" | Out-File $LogFile -Append -Encoding utf8 -Width 2000 $ISS = [System.Management.Automation.Runspaces.InitialSessionState]::CreateDefault() $NetStackHelperModules = Get-ChildItem (Join-Path -Path $PSScriptRoot -ChildPath 'Helpers\*') -Include '*.psm1' $NetStackHelperModules | ForEach-Object { $ISS.ImportPSModule($_.FullName) } $RunspacePool = [runspacefactory]::CreateRunspacePool(1, $MaxRunspaces, $ISS, $host) $RunspacePool.Open() $AllJobs = @() $StageResults = @() $TestableNetworks | ForEach-Object { $thisTestableNet = $_ $thisTestableNet.Group | ForEach-Object { $thisSource = $_ $thisSourceResult = @() $thisTestableNet.Group | Where-Object NodeName -ne $thisSource.NodeName | ForEach-Object { $thisTarget = $_ $PowerShell = [powershell]::Create() $PowerShell.RunspacePool = $RunspacePool [void] $PowerShell.AddScript({ param ( $thisComputerName, $thisSource, $thisTarget, $Definitions, $LogFile ) if ($thisSource.NodeName -eq $Env:COMPUTERNAME) { $thisSourceResult = Invoke-ICMPPMTUD -Source $thisSource.IPAddress -Destination $thisTarget.IPAddress } else { $thisSourceResult = Invoke-Command -ComputerName $thisComputerName ` -ArgumentList $thisSource.IPAddress, $thisTarget.IPAddress ` -ScriptBlock ${Function:\Invoke-ICMPPMTUD} } $Result = New-Object -TypeName psobject $Result | Add-Member -MemberType NoteProperty -Name SourceHostName -Value $thisComputerName $Result | Add-Member -MemberType NoteProperty -Name Source -Value $thisSource.IPAddress $Result | Add-Member -MemberType NoteProperty -Name Destination -Value $thisTarget.IPAddress $Result | Add-Member -MemberType NoteProperty -Name Connectivity -Value $thisSourceResult.Connectivity $Result | Add-Member -MemberType NoteProperty -Name MTU -Value $thisSourceResult.MTU $Result | Add-Member -MemberType NoteProperty -Name MSS -Value $thisSourceResult.MSS if ($thisSource.NodeName -eq $Env:COMPUTERNAME) { $thisSourceResult = Invoke-ICMPPMTUD -Source $thisSource.IPAddress -Destination $thisTarget.IPAddress -StartBytes $thisSourceMSS -Reliability } else { $thisSourceResult = Invoke-Command -ComputerName $thisComputerName ` -ArgumentList $thisSource.IPAddress, $thisTarget.IPAddress, $thisSourceResult.MSS , $null, $true ` -ScriptBlock ${Function:\Invoke-ICMPPMTUD} } $TotalSent = $thisSourceResult.Count $TotalFailed = ($thisSourceResult -eq '-1').Count $SuccessPercentage = ([Math]::Round((100 - (($TotalFailed / $TotalSent) * 100)), 2)) $Result | Add-Member -MemberType NoteProperty -Name TotalSent -Value $TotalSent $Result | Add-Member -MemberType NoteProperty -Name TotalFailed -Value $TotalFailed $Result | Add-Member -MemberType NoteProperty -Name Reliability -Value $SuccessPercentage # -1 (no response) will be ignored for LAT and JIT $Latency = Get-Latency -RoundTripTime ($thisSourceResult -ne -1) $Jitter = Get-Jitter -RoundTripTime ($thisSourceResult -ne -1) $Result | Add-Member -MemberType NoteProperty -Name Latency -Value $Latency $Result | Add-Member -MemberType NoteProperty -Name Jitter -Value $Jitter if ($TotalSent -and $SuccessPercentage -and $Latency -and $Jitter -and $Definitions.Reliability.ICMPSent -and $Definitions.Reliability.ICMPReliability -and $Definitions.Reliability.ICMPLatency -and $Definitions.Reliability.ICMPJitter) { if ($TotalSent -ge $Definitions.Reliability.ICMPSent -and $SuccessPercentage -ge $Definitions.Reliability.ICMPReliability -and $Latency -le $Definitions.Reliability.ICMPLatency -and $Jitter -le $Definitions.Reliability.ICMPJitter ) { $Result | Add-Member -MemberType NoteProperty -Name PathStatus -Value 'Pass' } else { $Result | Add-Member -MemberType NoteProperty -Name PathStatus -Value 'Fail' } } else { $Result | Add-Member -MemberType NoteProperty -Name PathStatus -Value 'Fail' "ERROR: Data failed to be collected for path ($($thisComputerName)) $($thisSource.IPAddress) -> $($thisTarget.IPAddress)" | Out-File $LogFile -Append -Encoding utf8 -Width 2000 } return $Result }) $param = @{ thisComputerName = $thisSource.NodeName thisSource = $thisSource thisTarget = $thisTarget Definitions = $Definitions LogFile = $LogFile } [void] $PowerShell.AddParameters($param) Write-Host ":: Stage $thisStage : $([System.DateTime]::Now) :: [Started] ($($thisSource.NodeName)) $($thisSource.IPAddress) -> $($thisTarget.IPAddress)" ":: Stage $thisStage : $([System.DateTime]::Now) :: [Started] ($($thisSource.NodeName)) $($thisSource.IPAddress) -> $($thisTarget.IPAddress)" | Out-File $LogFile -Append -Encoding utf8 -Width 2000 $asyncJobObj = @{ JobHandle = $PowerShell; AsyncHandle = $PowerShell.BeginInvoke() } $AllJobs += $asyncJobObj Remove-Variable Result -ErrorAction SilentlyContinue } } } While ($AllJobs -ne $null) { $AllJobs | Where-Object { $_.AsyncHandle.IsCompleted } | ForEach-Object { $thisJob = $_ $StageResults += $thisJob.JobHandle.EndInvoke($thisJob.AsyncHandle) $thisSourceHostName = ($thisJob.JobHandle.EndInvoke($thisJob.AsyncHandle)).SourceHostName $thisSource = ($thisJob.JobHandle.EndInvoke($thisJob.AsyncHandle)).Source $thisTarget = ($thisJob.JobHandle.EndInvoke($thisJob.AsyncHandle)).Destination $AllJobs = $AllJobs -ne $thisJob Write-Host ":: Stage $thisStage : $([System.DateTime]::Now) :: [Completed] ($thisSourceHostName) $($thisSource) -> $($thisTarget)" ":: Stage $thisStage : $([System.DateTime]::Now) :: [Completed] ($thisSourceHostName) $($thisSource) -> $($thisTarget)" | Out-File $LogFile -Append -Encoding utf8 -Width 2000 } } $RunspacePool.Close() $RunspacePool.Dispose() if ('Fail' -in $StageResults.PathStatus) { $ResultsSummary | Add-Member -MemberType NoteProperty -Name Stage1 -Value 'Fail'; $StageFailures++ } else { $ResultsSummary | Add-Member -MemberType NoteProperty -Name Stage1 -Value 'Pass' } $NetStackResults | Add-Member -MemberType NoteProperty -Name Stage1 -Value $StageResults Write-Host "Completed Stage: $thisStage - Connectivity and PMTUD - $([System.DateTime]::Now)" "Completed Stage: $thisStage - Connectivity and PMTUD - $([System.DateTime]::Now)`r`n" | Out-File $LogFile -Append -Encoding utf8 -Width 2000 "Stage 1 Results" | Out-File $LogFile -Append -Encoding utf8 -Width 2000 $StageResults | ft * | Out-File $LogFile -Append -Encoding utf8 -Width 2000 "####################################`r`n" | Out-File $LogFile -Append -Encoding utf8 -Width 2000 } '2' { # TCP Stress 1:1 if ( $ContinueOnFailure -eq $false ) { if ('fail' -in $NetStackResults.Stage1.PathStatus) { $Stage -gt 1 | ForEach-Object { $AbortedStage = $_ $NetStackResults | Add-Member -MemberType NoteProperty -Name "Stage$AbortedStage" -Value 'Aborted'; $StageFailures++ } Write-Warning 'Aborted due to failures in earlier stage(s). To continue despite failures, use the ContinueOnFailure parameter.' "Aborted due to failures in earlier stage(s). To continue despite failures, use the ContinueOnFailure parameter." | Out-File $LogFile -Append -Encoding utf8 -Width 2000 return $NetStackResults } } $thisStage = $_ Write-Host "Beginning Stage: $thisStage - TCP - $([System.DateTime]::Now)" "Stage 2`r`n" | Out-File $LogFile -Append -Encoding utf8 -Width 2000 "Console Output" | Out-File $LogFile -Append -Encoding utf8 -Width 2000 "Beginning Stage: $thisStage - TCP - $([System.DateTime]::Now)" | Out-File $LogFile -Append -Encoding utf8 -Width 2000 $ISS = [System.Management.Automation.Runspaces.InitialSessionState]::CreateDefault() $NetStackHelperModules = Get-ChildItem (Join-Path -Path $PSScriptRoot -ChildPath 'Helpers\*') -Include '*.psm1' $NetStackHelperModules | ForEach-Object { $ISS.ImportPSModule($_.FullName) } $RunspacePool = [runspacefactory]::CreateRunspacePool(1, $MaxRunspaces, $ISS, $host) $RunspacePool.Open() $StageResults = @() foreach ($group in $runspaceGroups) { $GroupedJobs = @() foreach ($pair in $group) { $PowerShell = [powershell]::Create() $PowerShell.RunspacePool = $RunspacePool [void] $PowerShell.AddScript({ param ( $thisComputerName, $thisSource, $thisTarget, $Definitions, $LogFile ) $Result = New-Object -TypeName psobject $Result | Add-Member -MemberType NoteProperty -Name ReceiverHostName -Value $thisTarget.NodeName $Result | Add-Member -MemberType NoteProperty -Name Sender -Value $thisSource.IPaddress $Result | Add-Member -MemberType NoteProperty -Name Receiver -Value $thisTarget.IPAddress $thisTargetResult = Invoke-TCP -Receiver $thisTarget -Sender $thisSource $Result | Add-Member -MemberType NoteProperty -Name RxLinkSpeedGbps -Value $thisTargetResult.ReceiverLinkSpeedGbps $Result | Add-Member -MemberType NoteProperty -Name RxGbps -Value $thisTargetResult.ReceivedGbps $Result | Add-Member -MemberType NoteProperty -Name RxPctgOfLinkSpeed -Value $thisTargetResult.ReceivedPctgOfLinkSpeed $Result | Add-Member -MemberType NoteProperty -Name MinExpectedPctgOfLinkSpeed -Value $Definitions.TCPPerf.TPUT if ($thisTargetResult.ReceivedPctgOfLinkSpeed -and $Definitions.TCPPerf.TPUT) { if ($thisTargetResult.ReceivedPctgOfLinkSpeed -ge $Definitions.TCPPerf.TPUT) { $Result | Add-Member -MemberType NoteProperty -Name PathStatus -Value 'Pass' } else { $Result | Add-Member -MemberType NoteProperty -Name PathStatus -Value 'Fail' } } else { $Result | Add-Member -MemberType NoteProperty -Name PathStatus -Value 'Fail' "ERROR: Data failed to be collected for path $($thisSource.IPAddress) -> ($($thisTarget.NodeName)) $($thisTarget.IPAddress)" | Out-File $LogFile -Append -Encoding utf8 -Width 2000 } $Result | Add-Member -MemberType NoteProperty -Name RawData -Value $thisTargetResult.RawData Return $Result }) $param = @{ thisComputerName = $pair.Source.NodeName thisSource = $pair.Source thisTarget = $pair.Target Definitions = $Definitions LogFile = $LogFile } [void] $PowerShell.AddParameters($param) Write-Host ":: Stage $thisStage : $([System.DateTime]::Now) :: [Started] $($pair.Source.IPAddress) -> ($($pair.Target.NodeName)) $($pair.Target.IPAddress)" ":: Stage $thisStage : $([System.DateTime]::Now) :: [Started] $($pair.Source.IPAddress) -> ($($pair.Target.NodeName)) $($pair.Target.IPAddress)" | Out-File $LogFile -Append -Encoding utf8 -Width 2000 $asyncJobObj = @{ JobHandle = $PowerShell AsyncHandle = $PowerShell.BeginInvoke() } $GroupedJobs += $asyncJobObj } While ($GroupedJobs -ne $null) { $GroupedJobs | Where-Object { $_.AsyncHandle.IsCompleted } | ForEach-Object { $thisJob = $_ $StageResults += $thisJob.JobHandle.EndInvoke($thisJob.AsyncHandle) $thisReceiverHostName = ($thisJob.JobHandle.EndInvoke($thisJob.AsyncHandle)).ReceiverHostName $thisSource = ($thisJob.JobHandle.EndInvoke($thisJob.AsyncHandle)).Sender $thisTarget = ($thisJob.JobHandle.EndInvoke($thisJob.AsyncHandle)).Receiver $GroupedJobs = $GroupedJobs -ne $thisJob Write-Host ":: Stage $thisStage : $([System.DateTime]::Now) :: [Completed] $($thisSource) -> ($thisReceiverHostName) $($thisTarget)" ":: Stage $thisStage : $([System.DateTime]::Now) :: [Completed] $($thisSource) -> ($thisReceiverHostName) $($thisTarget)" | Out-File $LogFile -Append -Encoding utf8 -Width 2000 } } } $RunspacePool.Close() $RunspacePool.Dispose() if ('Fail' -in $StageResults.PathStatus) { $ResultsSummary | Add-Member -MemberType NoteProperty -Name Stage2 -Value 'Fail'; $StageFailures++ } else { $ResultsSummary | Add-Member -MemberType NoteProperty -Name Stage2 -Value 'Pass' } $NetStackResults | Add-Member -MemberType NoteProperty -Name Stage2 -Value $StageResults Write-Host "Completed Stage: $thisStage - TCP - $([System.DateTime]::Now)" "Completed Stage: $thisStage - TCP - $([System.DateTime]::Now)`r`n" | Out-File $LogFile -Append -Encoding utf8 -Width 2000 "Stage 2 Results" | Out-File $LogFile -Append -Encoding utf8 -Width 2000 $StageResults | Select-Object -Property * -ExcludeProperty RawData | ft * | Out-File $LogFile -Append -Encoding utf8 -Width 2000 "####################################`r`n" | Out-File $LogFile -Append -Encoding utf8 -Width 2000 } '3' { # RDMA Connectivity $thisStage = $_ Write-Host "Beginning Stage: $thisStage - RDMA Ping - $([System.DateTime]::Now)" "Stage 3`r`n" | Out-File $LogFile -Append -Encoding utf8 -Width 2000 "Console Output" | Out-File $LogFile -Append -Encoding utf8 -Width 2000 "Beginning Stage: $thisStage - RDMA Ping - $([System.DateTime]::Now)" | Out-File $LogFile -Append -Encoding utf8 -Width 2000 $ISS = [System.Management.Automation.Runspaces.InitialSessionState]::CreateDefault() $NetStackHelperModules = Get-ChildItem (Join-Path -Path $PSScriptRoot -ChildPath 'Helpers\*') -Include '*.psm1' $NetStackHelperModules | ForEach-Object { $ISS.ImportPSModule($_.FullName) } $RunspacePool = [runspacefactory]::CreateRunspacePool(1, $MaxRunspaces, $ISS, $host) $RunspacePool.Open() $AllJobs = @() $StageResults = @() $TestableNetworks | ForEach-Object { $thisTestableNet = $_ $thisTestableNet.Group | Where-Object -FilterScript { $_.RDMAEnabled } | ForEach-Object { $thisSource = $_ $thisSourceResult = @() $thisTestableNet.Group | Where-Object NodeName -ne $thisSource.NodeName | Where-Object -FilterScript { $_.RDMAEnabled } | ForEach-Object { $thisTarget = $_ $PowerShell = [powershell]::Create() $PowerShell.RunspacePool = $RunspacePool [void] $PowerShell.AddScript({ param ( $thisSource, $thisTarget, $Definitions ) $Result = New-Object -TypeName psobject $Result | Add-Member -MemberType NoteProperty -Name ReceiverHostName -Value $thisTarget.NodeName $Result | Add-Member -MemberType NoteProperty -Name Sender -Value $thisSource.IPaddress $Result | Add-Member -MemberType NoteProperty -Name Receiver -Value $thisTarget.IPAddress $thisSourceResult = Invoke-NDKPing -Server $thisTarget -Client $thisSource if ($thisSourceResult.ServerSuccess) { $Result | Add-Member -MemberType NoteProperty -Name Connectivity -Value $true $Result | Add-Member -MemberType NoteProperty -Name PathStatus -Value 'Pass' } else { $Result | Add-Member -MemberType NoteProperty -Name Connectivity -Value $false $Result | Add-Member -MemberType NoteProperty -Name PathStatus -Value 'Fail' } Return $Result }) $param = @{ thisSource = $thisSource thisTarget = $thisTarget Definitions = $Definitions } [void] $PowerShell.AddParameters($param) Write-Host ":: Stage $thisStage : $([System.DateTime]::Now) :: [Started] $($thisSource.IPAddress) -> $($thisTarget.IPAddress)" ":: Stage $thisStage : $([System.DateTime]::Now) :: [Started] $($thisSource.IPAddress) -> $($thisTarget.IPAddress)" | Out-File $LogFile -Append -Encoding utf8 -Width 2000 $asyncJobObj = @{ JobHandle = $PowerShell AsyncHandle = $PowerShell.BeginInvoke() } $AllJobs += $asyncJobObj } } } While ($AllJobs -ne $null) { $AllJobs | Where-Object { $_.AsyncHandle.IsCompleted } | ForEach-Object { $thisJob = $_ $StageResults += $thisJob.JobHandle.EndInvoke($thisJob.AsyncHandle) $thisReceiverHostName = ($thisJob.JobHandle.EndInvoke($thisJob.AsyncHandle)).ReceiverHostName $thisSource = ($thisJob.JobHandle.EndInvoke($thisJob.AsyncHandle)).Sender $thisTarget = ($thisJob.JobHandle.EndInvoke($thisJob.AsyncHandle)).Receiver $AllJobs = $AllJobs -ne $thisJob Write-Host ":: Stage $thisStage : $([System.DateTime]::Now) :: [Completed] $($thisSource) -> ($thisReceiverHostName) $($thisTarget)" ":: Stage $thisStage : $([System.DateTime]::Now) :: [Completed] $($thisSource) -> ($thisReceiverHostName) $($thisTarget)" | Out-File $LogFile -Append -Encoding utf8 -Width 2000 } } $RunspacePool.Close() $RunspacePool.Dispose() if ('Fail' -in $StageResults.PathStatus) { $ResultsSummary | Add-Member -MemberType NoteProperty -Name Stage3 -Value 'Fail'; $StageFailures++ } else { $ResultsSummary | Add-Member -MemberType NoteProperty -Name Stage3 -Value 'Pass' } $NetStackResults | Add-Member -MemberType NoteProperty -Name Stage3 -Value $StageResults Write-Host "Completed Stage: $thisStage - RDMA Ping - $([System.DateTime]::Now)" "Completed Stage: $thisStage - RDMA Ping - $([System.DateTime]::Now)`r`n" | Out-File $LogFile -Append -Encoding utf8 -Width 2000 "Stage 3 Results" | Out-File $LogFile -Append -Encoding utf8 -Width 2000 $StageResults | ft * | Out-File $LogFile -Append -Encoding utf8 -Width 2000 "####################################`r`n" | Out-File $LogFile -Append -Encoding utf8 -Width 2000 } '4' { # RDMA Stress 1:1 if ( $ContinueOnFailure -eq $false ) { if ('fail' -in $NetStackResults.Stage3.PathStatus) { $Stage -ge 4 | ForEach-Object { $AbortedStage = $_ $NetStackResults | Add-Member -MemberType NoteProperty -Name "Stage$AbortedStage" -Value 'Aborted'; $StageFailures++ } Write-Warning 'Aborted due to failures in earlier stage(s). To continue despite failures, use the ContinueOnFailure parameter.' "Aborted due to failures in earlier stage(s). To continue despite failures, use the ContinueOnFailure parameter." | Out-File $LogFile -Append -Encoding utf8 -Width 2000 return $NetStackResults } } $thisStage = $_ Write-Host "Beginning Stage: $thisStage - RDMA Perf 1:1 - $([System.DateTime]::Now)" "Stage 4`r`n" | Out-File $LogFile -Append -Encoding utf8 -Width 2000 "Console Output" | Out-File $LogFile -Append -Encoding utf8 -Width 2000 "Beginning Stage: $thisStage - RDMA Perf 1:1 - $([System.DateTime]::Now)" | Out-File $LogFile -Append -Encoding utf8 -Width 2000 $ISS = [System.Management.Automation.Runspaces.InitialSessionState]::CreateDefault() $NetStackHelperModules = Get-ChildItem (Join-Path -Path $PSScriptRoot -ChildPath 'Helpers\*') -Include '*.psm1' $NetStackHelperModules | ForEach-Object { $ISS.ImportPSModule($_.FullName) } $RunspacePool = [runspacefactory]::CreateRunspacePool(1, $MaxRunspaces, $ISS, $host) $RunspacePool.Open() $StageResults = @() foreach ($group in $runspaceGroups) { $GroupedJobs = @() foreach ($pair in $group) { $PowerShell = [powershell]::Create() $PowerShell.RunspacePool = $RunspacePool [void] $PowerShell.AddScript({ param ( $thisSource, $thisTarget, $Definitions ) $Result = New-Object -TypeName psobject $Result | Add-Member -MemberType NoteProperty -Name ReceiverHostName -Value $thisTarget.NodeName $Result | Add-Member -MemberType NoteProperty -Name Sender -Value $thisSource.IPaddress $Result | Add-Member -MemberType NoteProperty -Name Receiver -Value $thisTarget.IPAddress $thisSourceResult = Invoke-NDKPerf1to1 -Server $thisTarget -Client $thisSource -ExpectedTPUT $Definitions.NDKPerf.TPUT $Result | Add-Member -MemberType NoteProperty -Name RxLinkSpeedGbps -Value $thisSourceResult.ReceiverLinkSpeedGbps $Result | Add-Member -MemberType NoteProperty -Name RxGbps -Value $thisSourceResult.ReceivedGbps $Result | Add-Member -MemberType NoteProperty -Name RxPctgOfLinkSpeed -Value $thisSourceResult.ReceivedPctgOfLinkSpeed $Result | Add-Member -MemberType NoteProperty -Name MinExpectedPctgOfLinkSpeed -Value $Definitions.NDKPerf.TPUT if ($thisSourceResult.ReceivedPctgOfLinkSpeed -and $Definitions.NDKPerf.TPUT) { if ($thisSourceResult.ReceivedPctgOfLinkSpeed -ge $Definitions.NDKPerf.TPUT) { $Result | Add-Member -MemberType NoteProperty -Name PathStatus -Value 'Pass' } else { $Result | Add-Member -MemberType NoteProperty -Name PathStatus -Value 'Fail' } } else { $Result | Add-Member -MemberType NoteProperty -Name PathStatus -Value 'Fail' "ERROR: Data failed to be collected for path $($thisSource.IPAddress) -> ($($thisTarget.NodeName)) $($thisTarget.IPAddress)" | Out-File $LogFile -Append -Encoding utf8 -Width 2000 } $Result | Add-Member -MemberType NoteProperty -Name RawData -Value $thisSourceResult.RawData Return $Result }) $param = @{ thisSource = $pair.Source thisTarget = $pair.Target Definitions = $Definitions } [void] $PowerShell.AddParameters($param) Write-Host ":: Stage $thisStage : $([System.DateTime]::Now) :: [Started] $($pair.Source.IPAddress) -> ($($pair.Target.NodeName)) $($pair.Target.IPAddress)" ":: Stage $thisStage : $([System.DateTime]::Now) :: [Started] $($pair.Source.IPAddress) -> ($($pair.Target.NodeName)) $($pair.Target.IPAddress)" | Out-File $LogFile -Append -Encoding utf8 -Width 2000 $asyncJobObj = @{ JobHandle = $PowerShell AsyncHandle = $PowerShell.BeginInvoke() } $GroupedJobs += $asyncJobObj } While ($GroupedJobs -ne $null) { $GroupedJobs | Where-Object { $_.AsyncHandle.IsCompleted } | ForEach-Object { $thisJob = $_ $StageResults += $thisJob.JobHandle.EndInvoke($thisJob.AsyncHandle) $thisReceiverHostName = ($thisJob.JobHandle.EndInvoke($thisJob.AsyncHandle)).ReceiverHostName $thisSource = ($thisJob.JobHandle.EndInvoke($thisJob.AsyncHandle)).Sender $thisTarget = ($thisJob.JobHandle.EndInvoke($thisJob.AsyncHandle)).Receiver $GroupedJobs = $GroupedJobs -ne $thisJob Write-Host ":: Stage $thisStage : $([System.DateTime]::Now) :: [Completed] $($thisSource) -> ($thisReceiverHostName) $($thisTarget)" ":: Stage $thisStage : $([System.DateTime]::Now) :: [Completed] $($thisSource) -> ($thisReceiverHostName) $($thisTarget)" | Out-File $LogFile -Append -Encoding utf8 -Width 2000 } } } $RunspacePool.Close() $RunspacePool.Dispose() if ('Fail' -in $StageResults.PathStatus) { $ResultsSummary | Add-Member -MemberType NoteProperty -Name Stage4 -Value 'Fail'; $StageFailures++ } else { $ResultsSummary | Add-Member -MemberType NoteProperty -Name Stage4 -Value 'Pass' } $NetStackResults | Add-Member -MemberType NoteProperty -Name Stage4 -Value $StageResults Write-Host "Completed Stage: $thisStage - RDMA Perf 1:1 - $([System.DateTime]::Now)" "Completed Stage: $thisStage - RDMA Perf 1:1 - $([System.DateTime]::Now)`r`n" | Out-File $LogFile -Append -Encoding utf8 -Width 2000 "Stage 4 Results" | Out-File $LogFile -Append -Encoding utf8 -Width 2000 $StageResults | Select-Object -Property * -ExcludeProperty RawData | ft * | Out-File $LogFile -Append -Encoding utf8 -Width 2000 "####################################`r`n" | Out-File $LogFile -Append -Encoding utf8 -Width 2000 } '5' { # RDMA Stress N:1 if ( $ContinueOnFailure -eq $false ) { if ('fail' -in $NetStackResults.Stage3.PathStatus -or 'fail' -in $NetStackResults.Stage4.PathStatus) { $Stage -ge 5 | ForEach-Object { $AbortedStage = $_ $NetStackResults | Add-Member -MemberType NoteProperty -Name "Stage$AbortedStage" -Value 'Aborted'; $StageFailures++ } Write-Warning 'Aborted due to failures in earlier stage(s). To continue despite failures, use the ContinueOnFailure parameter.' "Aborted due to failures in earlier stage(s). To continue despite failures, use the ContinueOnFailure parameter." | Out-File $LogFile -Append -Encoding utf8 -Width 2000 return $NetStackResults } } $thisStage = $_ Write-Host "Beginning Stage: $thisStage - RDMA Perf N:1 - $([System.DateTime]::Now)" "Stage 5`r`n" | Out-File $LogFile -Append -Encoding utf8 -Width 2000 "Console Output" | Out-File $LogFile -Append -Encoding utf8 -Width 2000 "Beginning Stage: $thisStage - RDMA Perf N:1 - $([System.DateTime]::Now)" | Out-File $LogFile -Append -Encoding utf8 -Width 2000 $StageResults = @() $TestableNetworks | ForEach-Object { $thisTestableNet = $_ $thisTestableNet.Group | Where-Object -FilterScript { $_.RDMAEnabled } | ForEach-Object { $thisTarget = $_ $ClientNetwork = @($thisTestableNet.Group | Where-Object NodeName -ne $thisTarget.NodeName | Where-Object -FilterScript { $_.RDMAEnabled }) Write-Host ":: $([System.DateTime]::Now) :: [Started] N -> Interface $($thisTarget.InterfaceIndex) ($($thisTarget.IPAddress))" ":: $([System.DateTime]::Now) :: [Started] N -> Interface $($thisTarget.InterfaceIndex) ($($thisTarget.IPAddress))" | Out-File $LogFile -Append -Encoding utf8 -Width 2000 $thisTargetResult = Invoke-NDKPerfNto1 -Server $thisTarget -ClientNetwork $ClientNetwork -ExpectedTPUT $Definitions.NDKPerf.TPUT $Result = New-Object -TypeName psobject $Result | Add-Member -MemberType NoteProperty -Name ReceiverHostName -Value $thisTarget.NodeName $Result | Add-Member -MemberType NoteProperty -Name Receiver -Value $thisTarget.IPAddress $Result | Add-Member -MemberType NoteProperty -Name RxLinkSpeedGbps -Value $thisTargetResult.ReceiverLinkSpeedGbps $Result | Add-Member -MemberType NoteProperty -Name RxGbps -Value $thisTargetResult.RxGbps if ($thisTargetResult.ServerSuccess) { $Result | Add-Member -MemberType NoteProperty -Name ReceiverStatus -Value 'Pass' } else { $Result | Add-Member -MemberType NoteProperty -Name ReceiverStatus -Value 'Fail' } $Result | Add-Member -MemberType NoteProperty -Name ClientNetworkTested -Value $thisTargetResult.ClientNetworkTested $Result | Add-Member -MemberType NoteProperty -Name RawData -Value $thisTargetResult.RawData $StageResults += $Result Remove-Variable Result -ErrorAction SilentlyContinue Write-Host ":: $([System.DateTime]::Now) :: [Completed] N -> Interface $($thisTarget.InterfaceIndex) ($($thisTarget.IPAddress))" ":: $([System.DateTime]::Now) :: [Completed] N -> Interface $($thisTarget.InterfaceIndex) ($($thisTarget.IPAddress))" | Out-File $LogFile -Append -Encoding utf8 -Width 2000 } } if ('Fail' -in $StageResults.ReceiverStatus) { $ResultsSummary | Add-Member -MemberType NoteProperty -Name Stage5 -Value 'Fail'; $StageFailures++ } else { $ResultsSummary | Add-Member -MemberType NoteProperty -Name Stage5 -Value 'Pass' } $NetStackResults | Add-Member -MemberType NoteProperty -Name Stage5 -Value $StageResults Write-Host "Completed Stage: $thisStage - RDMA Perf N:1 - $([System.DateTime]::Now)" "Completed Stage: $thisStage - RDMA Perf N:1 - $([System.DateTime]::Now)`r`n" | Out-File $LogFile -Append -Encoding utf8 -Width 2000 "Stage 5 Results" | Out-File $LogFile -Append -Encoding utf8 -Width 2000 $StageResults | Select-Object -Property * -ExcludeProperty RawData | ft * | Out-File $LogFile -Append -Encoding utf8 -Width 2000 "####################################`r`n" | Out-File $LogFile -Append -Encoding utf8 -Width 2000 } '6' { # RDMA Stress N:N if ( $ContinueOnFailure -eq $false ) { if ('fail' -in $NetStackResults.Stage3.PathStatus -or 'fail' -in $NetStackResults.Stage4.PathStatus -or 'fail' -in $NetStackResults.Stage5.PathStatus) { $Stage -ge 6 | ForEach-Object { $AbortedStage = $_ $ResultsSummary | Add-Member -MemberType NoteProperty -Name "Stage$AbortedStage" -Value 'Aborted'; $StageFailures++ } Write-Warning 'Aborted due to failures in earlier stage(s). To continue despite failures, use the ContinueOnFailure parameter.' "Aborted due to failures in earlier stage(s). To continue despite failures, use the ContinueOnFailure parameter." | Out-File $LogFile -Append -Encoding utf8 -Width 2000 return $NetStackResults } } $thisStage = $_ Write-Host "Beginning Stage: $thisStage - RDMA Perf N:N - $([System.DateTime]::Now)" "Stage 6`r`n" | Out-File $LogFile -Append -Encoding utf8 -Width 2000 "Console Output" | Out-File $LogFile -Append -Encoding utf8 -Width 2000 "Beginning Stage: $thisStage - RDMA Perf N:N - $([System.DateTime]::Now)" | Out-File $LogFile -Append -Encoding utf8 -Width 2000 $StageResults = @() $TestableNetworks | ForEach-Object { $thisTestableNet = $_ $ServerList = $thisTestableNet.Group | Where-Object -FilterScript { $_.RDMAEnabled } $thisSubnet = ($ServerList | Select-Object -First 1).subnet $thisVLAN = ($ServerList | Select-Object -First 1).VLAN Write-Host ":: $([System.DateTime]::Now) :: [Started] N -> N on subnet $($thisSubnet) and VLAN $($thisVLAN)" ":: $([System.DateTime]::Now) :: [Started] N -> N on subnet $($thisSubnet) and VLAN $($thisVLAN)" | Out-File $LogFile -Append -Encoding utf8 -Width 2000 $thisSourceResult = Invoke-NDKPerfNtoN -ServerList $ServerList -ExpectedTPUT $Definitions.NDKPerf.TPUT $Result = New-Object -TypeName psobject $thisSubnet = $thisTestableNet.Name.Split(',')[0] $thisVLAN = $thisTestableNet.Name.Split(',')[1].Trim() $Result | Add-Member -MemberType NoteProperty -Name Subnet -Value $thisSubnet $Result | Add-Member -MemberType NoteProperty -Name VLAN -Value $thisVLAN $Result | Add-Member -MemberType NoteProperty -Name RxGbps -Value $thisSourceResult.RxGbps if ($thisSourceResult.ServerSuccess) { $Result | Add-Member -MemberType NoteProperty -Name NetworkStatus -Value 'Pass' } else { $Result | Add-Member -MemberType NoteProperty -Name NetworkStatus -Value 'Fail' } $Result | Add-Member -MemberType NoteProperty -Name RawData -Value $thisSourceResult.RawData Write-Host ":: $([System.DateTime]::Now) :: [Completed] N -> N on subnet $($thisSubnet) and VLAN $($thisVLAN)" ":: $([System.DateTime]::Now) :: [Completed] N -> N on subnet $($thisSubnet) and VLAN $($thisVLAN)" | Out-File $LogFile -Append -Encoding utf8 -Width 2000 $StageResults += $Result Remove-Variable Result -ErrorAction SilentlyContinue } if ('Fail' -in $StageResults.NetworkStatus) { $ResultsSummary | Add-Member -MemberType NoteProperty -Name Stage6 -Value 'Fail'; $StageFailures++ } else { $ResultsSummary | Add-Member -MemberType NoteProperty -Name Stage6 -Value 'Pass' } $NetStackResults | Add-Member -MemberType NoteProperty -Name Stage6 -Value $StageResults Write-Host "Completed Stage: $thisStage - RDMA Perf N:N - $([System.DateTime]::Now)" "Completed Stage: $thisStage - RDMA Perf N:N - $([System.DateTime]::Now)`r`n" | Out-File $LogFile -Append -Encoding utf8 -Width 2000 "Stage 6 Results" | Out-File $LogFile -Append -Encoding utf8 -Width 2000 $StageResults | Select-Object -Property * -ExcludeProperty RawData | ft * | Out-File $LogFile -Append -Encoding utf8 -Width 2000 "####################################`r`n" | Out-File $LogFile -Append -Encoding utf8 -Width 2000 } } if ($StageFailures -gt 0) { $ResultsSummary | Add-Member -MemberType NoteProperty -Name NetStack -Value 'Fail' } else { $ResultsSummary | Add-Member -MemberType NoteProperty -Name NetStack -Value 'Pass' } "Net Stack Results" | Out-File $LogFile -Append -Encoding utf8 -Width 2000 $ResultsSummary | ft * | Out-File $LogFile -Append -Encoding utf8 -Width 2000 "####################################`r`n" | Out-File $LogFile -Append -Encoding utf8 -Width 2000 $NetStackResults | Add-Member -MemberType NoteProperty -Name ResultsSummary -Value $ResultsSummary $Failures = Get-Failures -NetStackResults $NetStackResults if (@($Failures.PSObject.Properties).Count -gt 0) { $NetStackResults | Add-Member -MemberType NoteProperty -Name Failures -Value $Failures } Write-RecommendationsToLogFile -NetStackResults $NetStackResults -LogFile $LogFile Write-Verbose "Log file stored at: $LogPath" Return $NetStackResults } |