DSCResources/DSC_NetIPInterface/en-US/about_NetIPInterface.help.txt
.NAME
NetIPInterface .DESCRIPTION This resource is used to configure the IP interface settings for a network interface. ## Known Issues - If you define a value for InterfaceMetric, the AutomaticMetric setting is ignored. PowerShell ignores AutomaticMetric when you use both arguments with the Set-NetIPInterface cmdlet. .PARAMETER InterfaceAlias Key - String Alias of the network interface to configure. .PARAMETER AddressFamily Key - String Allowed values: IPv4, IPv6 IP address family on the interface to configure. .PARAMETER AdvertiseDefaultRoute Write - String Allowed values: Enabled, Disabled Specifies the default router advertisement for an interface. .PARAMETER Advertising Write - String Allowed values: Enabled, Disabled Specifies the router advertisement value for the IP interface. .PARAMETER AutomaticMetric Write - String Allowed values: Enabled, Disabled Specifies the value for automatic metric calculation. .PARAMETER Dhcp Write - String Allowed values: Enabled, Disabled Specifies the Dynamic Host Configuration Protocol (DHCP) value for an IP interface. .PARAMETER DirectedMacWolPattern Write - String Allowed values: Enabled, Disabled Specifies the wake-up packet value for an IP interface. .PARAMETER EcnMarking Write - String Allowed values: Disabled, UseEct1, UseEct0, AppDecide Specifies the value for Explicit Congestion Notification (ECN) marking. .PARAMETER ForceArpNdWolPattern Write - String Allowed values: Enabled, Disabled Specifies the Wake On LAN (WOL) value for the IP interface. .PARAMETER Forwarding Write - String Allowed values: Enabled, Disabled Specifies the packet forwarding value for the IP interface. .PARAMETER IgnoreDefaultRoutes Write - String Allowed values: Enabled, Disabled Specifies a value for Default Route advertisements. .PARAMETER ManagedAddressConfiguration Write - String Allowed values: Enabled, Disabled Specifies the value for managed address configuration. .PARAMETER NeighborUnreachabilityDetection Write - String Allowed values: Enabled, Disabled Specifies the value for Neighbor Unreachability Detection (NUD). .PARAMETER OtherStatefulConfiguration Write - String Allowed values: Enabled, Disabled Specifies the value for configuration other than addresses. .PARAMETER RouterDiscovery Write - String Allowed values: Enabled, Disabled, ControlledByDHCP Specifies the value for router discovery for an IP interface. .PARAMETER WeakHostReceive Write - String Allowed values: Enabled, Disabled Specifies the receive value for a weak host model. .PARAMETER WeakHostSend Write - String Allowed values: Enabled, Disabled Specifies the send value for a weak host model. .PARAMETER NlMtu Write - UInt32 Specifies the network layer Maximum Transmission Unit (MTU) value, in bytes, for an IP interface. .PARAMETER InterfaceMetric Write - UInt32 Specifies the metric for an IP interface. .EXAMPLE 1 This example enables the following settings on the IPv4 network interface with alias 'Ethernet': - AdvertiseDefaultRoute - Avertising - AutomaticMetric - DirectedMacWolPattern - ForceArpNdWolPattern - Forwarding - IgnoreDefaultRoute - ManagedAddressConfiguration - NeighborUnreachabilityDetection - OtherStatefulConfiguration - RouterDiscovery - NlMtu The EcnMarking parameter will be set to AppDecide. Configuration NetIPInterface_MultipleSettings_Config { Import-DscResource -Module NetworkingDsc Node localhost { NetIPInterface MultipleSettings { InterfaceAlias = 'Ethernet' AddressFamily = 'IPv4' AdvertiseDefaultRoute = 'Enabled' Advertising = 'Enabled' AutomaticMetric = 'Enabled' DirectedMacWolPattern = 'Enabled' EcnMarking = 'AppDecide' ForceArpNdWolPattern = 'Enabled' Forwarding = 'Enabled' IgnoreDefaultRoutes = 'Enabled' ManagedAddressConfiguration = 'Enabled' NeighborUnreachabilityDetection = 'Enabled' OtherStatefulConfiguration = 'Enabled' RouterDiscovery = 'Enabled' NlMtu = 1576 } } } .EXAMPLE 2 Enabling DHCP for the IPv4 Address and DNS on the adapter with alias 'Ethernet'. Configuration NetIPInterface_EnableDHCP_Config { Import-DscResource -Module NetworkingDsc Node localhost { NetIPInterface EnableDhcp { InterfaceAlias = 'Ethernet' AddressFamily = 'IPv4' Dhcp = 'Enabled' } DnsServerAddress EnableDhcpDNS { InterfaceAlias = 'Ethernet' AddressFamily = 'IPv4' } } } .EXAMPLE 3 Disable the weak host receive IPv4 setting for the network adapter with alias 'Ethernet'. Configuration NetIPInterface_DisableWeakHostReceive_Config { Import-DscResource -Module NetworkingDsc Node localhost { NetIPInterface DisableWeakHostReceiving { InterfaceAlias = 'Ethernet' AddressFamily = 'IPv4' WeakHostReceive = 'Disabled' } } } .EXAMPLE 4 Disable the weak host send IPv4 setting for the network adapter with alias 'Ethernet'. Configuration NetIPInterface_DisableWeakHostSend_Config { Import-DscResource -Module NetworkingDsc Node localhost { NetIPInterface DisableWeakHostSend { InterfaceAlias = 'Ethernet' AddressFamily = 'IPv4' WeakHostSend = 'Disabled' } } } .EXAMPLE 5 Set a specified interface metrics for the network adapters with alias 'Ethernet' and 'Ethernet 2'. Configuration NetIPInterface_SetInterfaceMetric { Import-DscResource -Module NetworkingDsc Node localhost { NetIPInterface EthernetMetric { InterfaceAlias = 'Ethernet' AddressFamily = 'IPv4' AutomaticMetric = 'Disabled' InterfaceMetric = 10 } NetIPInterface Ethernet2Metric { InterfaceAlias = 'Ethernet 2' AddressFamily = 'IPv4' AutomaticMetric = 'Disabled' InterfaceMetric = 20 } } } |