Microsoft.Data.Sqlite.xml
|
<?xml version="1.0"?>
<doc> <assembly> <name>Microsoft.Data.Sqlite</name> </assembly> <members> <member name="T:Microsoft.Data.Sqlite.SqliteCacheMode"> <summary> Represents the caching modes that can be used when creating a new <see cref="T:Microsoft.Data.Sqlite.SqliteConnection" />. </summary> <seealso href="http://sqlite.org/sharedcache.html">SQLite Shared-Cache Mode</seealso> </member> <member name="F:Microsoft.Data.Sqlite.SqliteCacheMode.Default"> <summary> Default mode. </summary> </member> <member name="F:Microsoft.Data.Sqlite.SqliteCacheMode.Private"> <summary> Private-cache mode. Each connection uses a private cache. </summary> </member> <member name="F:Microsoft.Data.Sqlite.SqliteCacheMode.Shared"> <summary> Shared-cache mode. Connections share a cache. This mode can change the behavior of transaction and table locking. </summary> </member> <member name="T:Microsoft.Data.Sqlite.SqliteCommand"> <summary> Represents a SQL statement to be executed against a SQLite database. </summary> </member> <member name="M:Microsoft.Data.Sqlite.SqliteCommand.#ctor"> <summary> Initializes a new instance of the <see cref="T:Microsoft.Data.Sqlite.SqliteCommand" /> class. </summary> </member> <member name="M:Microsoft.Data.Sqlite.SqliteCommand.#ctor(System.String)"> <summary> Initializes a new instance of the <see cref="T:Microsoft.Data.Sqlite.SqliteCommand" /> class. </summary> <param name="commandText">The SQL to execute against the database.</param> </member> <member name="M:Microsoft.Data.Sqlite.SqliteCommand.#ctor(System.String,Microsoft.Data.Sqlite.SqliteConnection)"> <summary> Initializes a new instance of the <see cref="T:Microsoft.Data.Sqlite.SqliteCommand" /> class. </summary> <param name="commandText">The SQL to execute against the database.</param> <param name="connection">The connection used by the command.</param> </member> <member name="M:Microsoft.Data.Sqlite.SqliteCommand.#ctor(System.String,Microsoft.Data.Sqlite.SqliteConnection,Microsoft.Data.Sqlite.SqliteTransaction)"> <summary> Initializes a new instance of the <see cref="T:Microsoft.Data.Sqlite.SqliteCommand" /> class. </summary> <param name="commandText">The SQL to execute against the database.</param> <param name="connection">The connection used by the command.</param> <param name="transaction">The transaction within which the command executes.</param> </member> <member name="P:Microsoft.Data.Sqlite.SqliteCommand.CommandType"> <summary> Gets or sets a value indicating how <see cref="P:Microsoft.Data.Sqlite.SqliteCommand.CommandText" /> is interpreted. Only <see cref="F:System.Data.CommandType.Text" /> is supported. </summary> <value>A value indicating how <see cref="P:Microsoft.Data.Sqlite.SqliteCommand.CommandText" /> is interpreted.</value> </member> <member name="P:Microsoft.Data.Sqlite.SqliteCommand.CommandText"> <summary> Gets or sets the SQL to execute against the database. </summary> <value>The SQL to execute against the database.</value> </member> <member name="P:Microsoft.Data.Sqlite.SqliteCommand.Connection"> <summary> Gets or sets the connection used by the command. </summary> <value>The connection used by the command.</value> </member> <member name="P:Microsoft.Data.Sqlite.SqliteCommand.DbConnection"> <summary> Gets or sets the connection used by the command. Must be a <see cref="T:Microsoft.Data.Sqlite.SqliteConnection" />. </summary> <value>The connection used by the command.</value> </member> <member name="P:Microsoft.Data.Sqlite.SqliteCommand.Transaction"> <summary> Gets or sets the transaction within which the command executes. </summary> <value>The transaction within which the command executes.</value> </member> <member name="P:Microsoft.Data.Sqlite.SqliteCommand.DbTransaction"> <summary> Gets or sets the transaction within which the command executes. Must be a <see cref="T:Microsoft.Data.Sqlite.SqliteTransaction" />. </summary> <value>The transaction within which the command executes.</value> </member> <member name="P:Microsoft.Data.Sqlite.SqliteCommand.Parameters"> <summary> Gets the collection of parameters used by the command. </summary> <value>The collection of parameters used by the command.</value> </member> <member name="P:Microsoft.Data.Sqlite.SqliteCommand.DbParameterCollection"> <summary> Gets the collection of parameters used by the command. </summary> <value>The collection of parameters used by the command.</value> </member> <member name="P:Microsoft.Data.Sqlite.SqliteCommand.CommandTimeout"> <summary> Gets or sets the wait time before terminating the attempt to execute the command. </summary> <value>The wait time before terminating the attempt to execute the command.</value> <remarks> The timeout is used when the command is waiting to obtain a lock on the table. </remarks> </member> <member name="P:Microsoft.Data.Sqlite.SqliteCommand.DesignTimeVisible"> <summary> Gets or sets a value indicating whether the command should be visible in an interface control. </summary> <value>A value indicating whether the command should be visible in an interface control.</value> </member> <member name="P:Microsoft.Data.Sqlite.SqliteCommand.UpdatedRowSource"> <summary> Gets or sets a value indicating how the results are applied to the row being updated. </summary> <value>A value indicating how the results are applied to the row being updated.</value> </member> <member name="M:Microsoft.Data.Sqlite.SqliteCommand.CreateParameter"> <summary> Creates a new parameter. </summary> <returns>The new parameter.</returns> </member> <member name="M:Microsoft.Data.Sqlite.SqliteCommand.CreateDbParameter"> <summary> Creates a new parameter. </summary> <returns>The new parameter.</returns> </member> <member name="M:Microsoft.Data.Sqlite.SqliteCommand.Prepare"> <summary> Creates a prepared version of the command on the database. This has no effect. </summary> </member> <member name="M:Microsoft.Data.Sqlite.SqliteCommand.ExecuteReader"> <summary> Executes the <see cref="P:Microsoft.Data.Sqlite.SqliteCommand.CommandText" /> against the database and returns a data reader. </summary> <returns>The data reader.</returns> <exception cref="T:Microsoft.Data.Sqlite.SqliteException">A SQLite error occurs during execution.</exception> </member> <member name="M:Microsoft.Data.Sqlite.SqliteCommand.ExecuteReader(System.Data.CommandBehavior)"> <summary> Executes the <see cref="P:Microsoft.Data.Sqlite.SqliteCommand.CommandText" /> against the database and returns a data reader. </summary> <param name="behavior"> A description of the results of the query and its effect on the database. <para>Only <see cref="F:System.Data.CommandBehavior.Default" />, <see cref="F:System.Data.CommandBehavior.SequentialAccess" />, <see cref="F:System.Data.CommandBehavior.SingleResult" />, <see cref="F:System.Data.CommandBehavior.SingleRow" />, and <see cref="F:System.Data.CommandBehavior.CloseConnection" /> are supported.</para> </param> <returns>The data reader.</returns> <exception cref="T:Microsoft.Data.Sqlite.SqliteException">A SQLite error occurs during execution.</exception> </member> <member name="M:Microsoft.Data.Sqlite.SqliteCommand.ExecuteDbDataReader(System.Data.CommandBehavior)"> <summary> Executes the <see cref="P:Microsoft.Data.Sqlite.SqliteCommand.CommandText" /> against the database and returns a data reader. </summary> <param name="behavior">A description of query's results and its effect on the database.</param> <returns>The data reader.</returns> </member> <member name="M:Microsoft.Data.Sqlite.SqliteCommand.ExecuteReaderAsync"> <summary> Executes the <see cref="P:Microsoft.Data.Sqlite.SqliteCommand.CommandText" /> asynchronously against the database and returns a data reader. </summary> <returns>A task representing the asynchronous operation.</returns> <remarks> SQLite does not support asynchronous execution. Use write-ahead logging instead. </remarks> <seealso href="http://sqlite.org/wal.html">Write-Ahead Logging</seealso> </member> <member name="M:Microsoft.Data.Sqlite.SqliteCommand.ExecuteReaderAsync(System.Threading.CancellationToken)"> <summary> Executes the <see cref="P:Microsoft.Data.Sqlite.SqliteCommand.CommandText" /> asynchronously against the database and returns a data reader. </summary> <param name="cancellationToken">The token to monitor for cancellation requests.</param> <returns>A task representing the asynchronous operation.</returns> <remarks> SQLite does not support asynchronous execution. Use write-ahead logging instead. </remarks> <seealso href="http://sqlite.org/wal.html">Write-Ahead Logging</seealso> </member> <member name="M:Microsoft.Data.Sqlite.SqliteCommand.ExecuteReaderAsync(System.Data.CommandBehavior)"> <summary> Executes the <see cref="P:Microsoft.Data.Sqlite.SqliteCommand.CommandText" /> asynchronously against the database and returns a data reader. </summary> <param name="behavior">A description of query's results and its effect on the database.</param> <returns>A task representing the asynchronous operation.</returns> <remarks> SQLite does not support asynchronous execution. Use write-ahead logging instead. </remarks> <seealso href="http://sqlite.org/wal.html">Write-Ahead Logging</seealso> </member> <member name="M:Microsoft.Data.Sqlite.SqliteCommand.ExecuteReaderAsync(System.Data.CommandBehavior,System.Threading.CancellationToken)"> <summary> Executes the <see cref="P:Microsoft.Data.Sqlite.SqliteCommand.CommandText" /> asynchronously against the database and returns a data reader. </summary> <param name="behavior">A description of query's results and its effect on the database.</param> <param name="cancellationToken">The token to monitor for cancellation requests.</param> <returns>A task representing the asynchronous operation.</returns> <remarks> SQLite does not support asynchronous execution. Use write-ahead logging instead. </remarks> <seealso href="http://sqlite.org/wal.html">Write-Ahead Logging</seealso> </member> <member name="M:Microsoft.Data.Sqlite.SqliteCommand.ExecuteDbDataReaderAsync(System.Data.CommandBehavior,System.Threading.CancellationToken)"> <summary> Executes the <see cref="P:Microsoft.Data.Sqlite.SqliteCommand.CommandText" /> asynchronously against the database and returns a data reader. </summary> <param name="behavior">A description of query's results and its effect on the database.</param> <param name="cancellationToken">The token to monitor for cancellation requests.</param> <returns>A task representing the asynchronous operation.</returns> </member> <member name="M:Microsoft.Data.Sqlite.SqliteCommand.ExecuteNonQuery"> <summary> Executes the <see cref="P:Microsoft.Data.Sqlite.SqliteCommand.CommandText" /> against the database. </summary> <returns>The number of rows inserted, updated, or deleted. -1 for SELECT statements.</returns> <exception cref="T:Microsoft.Data.Sqlite.SqliteException">A SQLite error occurs during execution.</exception> </member> <member name="M:Microsoft.Data.Sqlite.SqliteCommand.ExecuteScalar"> <summary> Executes the <see cref="P:Microsoft.Data.Sqlite.SqliteCommand.CommandText" /> against the database and returns the result. </summary> <returns>The first column of the first row of the results, or null if no results.</returns> <exception cref="T:Microsoft.Data.Sqlite.SqliteException">A SQLite error occurs during execution.</exception> </member> <member name="M:Microsoft.Data.Sqlite.SqliteCommand.Cancel"> <summary> Attempts to cancel the execution of the command. Does nothing. </summary> </member> <member name="T:Microsoft.Data.Sqlite.SqliteConnection"> <summary> Represents a connection to a SQLite database. </summary> </member> <member name="M:Microsoft.Data.Sqlite.SqliteConnection.#ctor"> <summary> Initializes a new instance of the <see cref="T:Microsoft.Data.Sqlite.SqliteConnection" /> class. </summary> </member> <member name="M:Microsoft.Data.Sqlite.SqliteConnection.#ctor(System.String)"> <summary> Initializes a new instance of the <see cref="T:Microsoft.Data.Sqlite.SqliteConnection" /> class. </summary> <param name="connectionString">The string used to open the connection.</param> <seealso cref="T:Microsoft.Data.Sqlite.SqliteConnectionStringBuilder" /> </member> <member name="P:Microsoft.Data.Sqlite.SqliteConnection.Handle"> <summary> Gets a handle to underlying database connection. </summary> <value>A handle to underlying database connection.</value> <seealso href="http://sqlite.org/c3ref/sqlite3.html">Database Connection Handle</seealso> </member> <member name="P:Microsoft.Data.Sqlite.SqliteConnection.ConnectionString"> <summary> Gets or sets a string used to open the connection. </summary> <value>A string used to open the connection.</value> <seealso cref="T:Microsoft.Data.Sqlite.SqliteConnectionStringBuilder" /> </member> <member name="P:Microsoft.Data.Sqlite.SqliteConnection.Database"> <summary> Gets the name of the current database. Always 'main'. </summary> <value>The name of the current database.</value> </member> <member name="P:Microsoft.Data.Sqlite.SqliteConnection.DataSource"> <summary> Gets the path to the database file. Will be absolute for open connections. </summary> <value>The path to the database file.</value> </member> <member name="P:Microsoft.Data.Sqlite.SqliteConnection.ServerVersion"> <summary> Gets the version of SQLite used by the connection. </summary> <value>The version of SQLite used by the connection.</value> </member> <member name="P:Microsoft.Data.Sqlite.SqliteConnection.State"> <summary> Gets the current state of the connection. </summary> <value>The current state of the connection.</value> </member> <member name="P:Microsoft.Data.Sqlite.SqliteConnection.Transaction"> <summary> Gets or sets the transaction currently being used by the connection, or null if none. </summary> <value>The transaction currently being used by the connection.</value> </member> <member name="M:Microsoft.Data.Sqlite.SqliteConnection.Open"> <summary> Opens a connection to the database using the value of <see cref="P:Microsoft.Data.Sqlite.SqliteConnection.ConnectionString" />. </summary> <exception cref="T:Microsoft.Data.Sqlite.SqliteException">A SQLite error occurs while opening the connection.</exception> </member> <member name="M:Microsoft.Data.Sqlite.SqliteConnection.Close"> <summary> Closes the connection to the database. Open transactions are rolled back. </summary> </member> <member name="M:Microsoft.Data.Sqlite.SqliteConnection.Dispose(System.Boolean)"> <summary> Releases any resources used by the connection and closes it. </summary> <param name="disposing"> true to release managed and unmanaged resources; false to release only unmanaged resources. </param> </member> <member name="M:Microsoft.Data.Sqlite.SqliteConnection.CreateCommand"> <summary> Creates a new command associated with the connection. </summary> <returns>The new command.</returns> <remarks> The command's <seealso cref="P:Microsoft.Data.Sqlite.SqliteCommand.Transaction" /> property will also be set to the current transaction. </remarks> </member> <member name="M:Microsoft.Data.Sqlite.SqliteConnection.CreateDbCommand"> <summary> Creates a new command associated with the connection. </summary> <returns>The new command.</returns> </member> <member name="M:Microsoft.Data.Sqlite.SqliteConnection.BeginTransaction"> <summary> Begins a transaction on the connection. </summary> <returns>The transaction.</returns> </member> <member name="M:Microsoft.Data.Sqlite.SqliteConnection.BeginDbTransaction(System.Data.IsolationLevel)"> <summary> Begins a transaction on the connection. </summary> <param name="isolationLevel">The isolation level of the transaction.</param> <returns>The transaction.</returns> </member> <member name="M:Microsoft.Data.Sqlite.SqliteConnection.BeginTransaction(System.Data.IsolationLevel)"> <summary> Begins a transaction on the connection. </summary> <param name="isolationLevel"> The isolation level of the transaction. <para>Only <see cref="F:System.Data.IsolationLevel.ReadUncommitted" /> and <see cref="F:System.Data.IsolationLevel.Serializable" /> are supported.</para> </param> <returns>The transaction.</returns> </member> <member name="M:Microsoft.Data.Sqlite.SqliteConnection.ChangeDatabase(System.String)"> <summary> Changes the current database. Not supported. </summary> <param name="databaseName">The name of the database to use.</param> <exception cref="T:System.NotSupportedException">Always.</exception> </member> <member name="M:Microsoft.Data.Sqlite.SqliteConnection.EnableExtensions(System.Boolean)"> <summary> Enables extension loading on the connection. </summary> <param name="enable">true to enable; false to disable</param> <seealso href="http://sqlite.org/loadext.html">Run-Time Loadable Extensions</seealso> </member> <member name="T:Microsoft.Data.Sqlite.SqliteConnectionStringBuilder"> <summary> Provides a simple way to create and manage the contents of connection strings used by <see cref="T:Microsoft.Data.Sqlite.SqliteConnection" />. </summary> </member> <member name="M:Microsoft.Data.Sqlite.SqliteConnectionStringBuilder.#ctor"> <summary> Initializes a new instance of the <see cref="T:Microsoft.Data.Sqlite.SqliteConnectionStringBuilder" /> class. </summary> </member> <member name="M:Microsoft.Data.Sqlite.SqliteConnectionStringBuilder.#ctor(System.String)"> <summary> Initializes a new instance of the <see cref="T:Microsoft.Data.Sqlite.SqliteConnectionStringBuilder" /> class. </summary> <param name="connectionString"> The initial connection string the builder will represent. Can be null. </param> </member> <member name="P:Microsoft.Data.Sqlite.SqliteConnectionStringBuilder.DataSource"> <summary> Gets or sets the database file. </summary> <value>The database file.</value> </member> <member name="P:Microsoft.Data.Sqlite.SqliteConnectionStringBuilder.Mode"> <summary> Gets or sets the connection mode. </summary> <value>The connection mode.</value> </member> <member name="P:Microsoft.Data.Sqlite.SqliteConnectionStringBuilder.Keys"> <summary> Gets a collection containing the keys used by the connection string. </summary> <value>A collection containing the keys used by the connection string.</value> </member> <member name="P:Microsoft.Data.Sqlite.SqliteConnectionStringBuilder.Values"> <summary> Gets a collection containing the values used by the connection string. </summary> <value>A collection containing the values used by the connection string.</value> </member> <member name="P:Microsoft.Data.Sqlite.SqliteConnectionStringBuilder.Cache"> <summary> Gets or sets the caching mode used by the connection. </summary> <value>The caching mode used by the connection.</value> <seealso href="http://sqlite.org/sharedcache.html">SQLite Shared-Cache Mode</seealso> </member> <member name="P:Microsoft.Data.Sqlite.SqliteConnectionStringBuilder.Item(System.String)"> <summary> Gets or sets the value associated with the specified key. </summary> <param name="keyword">The key.</param> <returns>The value.</returns> </member> <member name="M:Microsoft.Data.Sqlite.SqliteConnectionStringBuilder.Clear"> <summary> Clears the contents of the builder. </summary> </member> <member name="M:Microsoft.Data.Sqlite.SqliteConnectionStringBuilder.ContainsKey(System.String)"> <summary> Determines whether the specified key is used by the connection string. </summary> <param name="keyword">The key to look for.</param> <returns>true if it is use; otherwise, false.</returns> </member> <member name="M:Microsoft.Data.Sqlite.SqliteConnectionStringBuilder.Remove(System.String)"> <summary> Removes the specified key and its value from the connection string. </summary> <param name="keyword">The key to remove.</param> <returns>true if the key was used; otherwise, false.</returns> </member> <member name="M:Microsoft.Data.Sqlite.SqliteConnectionStringBuilder.ShouldSerialize(System.String)"> <summary> Determines whether the specified key should be serialized into the connection string. </summary> <param name="keyword">The key to check.</param> <returns>true if it should be serialized; otherwise, false.</returns> </member> <member name="M:Microsoft.Data.Sqlite.SqliteConnectionStringBuilder.TryGetValue(System.String,System.Object@)"> <summary> Gets the value of the specified key if it is used. </summary> <param name="keyword">The key.</param> <param name="value">The value.</param> <returns>true if the key was used; otherwise, false.</returns> </member> <member name="T:Microsoft.Data.Sqlite.SqliteDataReader"> <summary> Provides methods for reading the result of a command executed against a SQLite database. </summary> </member> <member name="P:Microsoft.Data.Sqlite.SqliteDataReader.Depth"> <summary> Gets the depth of nesting for the current row. Always zero. </summary> <value>The depth of nesting for the current row.</value> </member> <member name="P:Microsoft.Data.Sqlite.SqliteDataReader.FieldCount"> <summary> Gets the number of columns in the current row. </summary> <value>The number of columns in the current row.</value> </member> <member name="P:Microsoft.Data.Sqlite.SqliteDataReader.Handle"> <summary> Gets a handle to underlying prepared statement. </summary> <value>A handle to underlying prepared statement.</value> <seealso href="http://sqlite.org/c3ref/stmt.html">Prepared Statement Object</seealso> </member> <member name="P:Microsoft.Data.Sqlite.SqliteDataReader.HasRows"> <summary> Gets a value indicating whether the data reader contains any rows. </summary> <value>A value indicating whether the data reader contains any rows.</value> </member> <member name="P:Microsoft.Data.Sqlite.SqliteDataReader.IsClosed"> <summary> Gets a value indicating whether the data reader is closed. </summary> <value>A value indicating whether the data reader is closed.</value> </member> <member name="P:Microsoft.Data.Sqlite.SqliteDataReader.RecordsAffected"> <summary> Gets the number of rows inserted, updated, or deleted. -1 for SELECT statements. </summary> <value>The number of rows inserted, updated, or deleted.</value> </member> <member name="P:Microsoft.Data.Sqlite.SqliteDataReader.Item(System.String)"> <summary> Gets the value of the specified column. </summary> <param name="name">The name of the column. The value is case-sensitive.</param> <returns>The value.</returns> </member> <member name="P:Microsoft.Data.Sqlite.SqliteDataReader.Item(System.Int32)"> <summary> Gets the value of the specified column. </summary> <param name="ordinal">The zero-based column ordinal.</param> <returns>The value.</returns> </member> <member name="M:Microsoft.Data.Sqlite.SqliteDataReader.GetEnumerator"> <summary> Gets an enumerator that can be used to iterate through the rows in the data reader. </summary> <returns>The enumerator.</returns> </member> <member name="M:Microsoft.Data.Sqlite.SqliteDataReader.Read"> <summary> Advances to the next row in the result set. </summary> <returns>true if there are more rows; otherwise, false.</returns> </member> <member name="M:Microsoft.Data.Sqlite.SqliteDataReader.NextResult"> <summary> Advances to the next result set for batched statements. </summary> <returns>true if there are more result sets; otherwise, false.</returns> </member> <member name="M:Microsoft.Data.Sqlite.SqliteDataReader.Close"> <summary> Closes the data reader. </summary> </member> <member name="M:Microsoft.Data.Sqlite.SqliteDataReader.GetSchemaTable"> <summary> Returns a data table that describes the column metadata. </summary> <returns>The data table.</returns> </member> <member name="M:Microsoft.Data.Sqlite.SqliteDataReader.Dispose(System.Boolean)"> <summary> Releases any resources used by the data reader and closes it. </summary> <param name="disposing"> true to release managed and unmanaged resources; false to release only unmanaged resources. </param> </member> <member name="M:Microsoft.Data.Sqlite.SqliteDataReader.GetName(System.Int32)"> <summary> Gets the name of the specified column. </summary> <param name="ordinal">The zero-based column ordinal.</param> <returns>The name of the column.</returns> </member> <member name="M:Microsoft.Data.Sqlite.SqliteDataReader.GetOrdinal(System.String)"> <summary> Gets the ordinal of the specified column. </summary> <param name="name">The name of the column.</param> <returns>The zero-based column ordinal.</returns> </member> <member name="M:Microsoft.Data.Sqlite.SqliteDataReader.GetDataTypeName(System.Int32)"> <summary> Gets the declared data type name of the specified column. The storage class is returned for computed columns. </summary> <param name="ordinal">The zero-based column ordinal.</param> <returns>The data type name of the column.</returns> <remarks>Due to SQLite's dynamic type system, this may not reflect the actual type of the value.</remarks> <seealso href="http://sqlite.org/datatype3.html">Datatypes In SQLite Version 3</seealso> </member> <member name="M:Microsoft.Data.Sqlite.SqliteDataReader.GetFieldType(System.Int32)"> <summary> Gets the data type of the specified column. </summary> <param name="ordinal">The zero-based column ordinal.</param> <returns>The data type of the column.</returns> </member> <member name="M:Microsoft.Data.Sqlite.SqliteDataReader.IsDBNull(System.Int32)"> <summary> Gets a value indicating whether the specified column is <see cref="T:System.DBNull" />. </summary> <param name="ordinal">The zero-based column ordinal.</param> <returns>true if the specified column is <see cref="T:System.DBNull" />; otherwise, false.</returns> </member> <member name="M:Microsoft.Data.Sqlite.SqliteDataReader.GetBoolean(System.Int32)"> <summary> Gets the value of the specified column as a <see cref="T:System.Boolean" />. </summary> <param name="ordinal">The zero-based column ordinal.</param> <returns>The value of the column.</returns> </member> <member name="M:Microsoft.Data.Sqlite.SqliteDataReader.GetByte(System.Int32)"> <summary> Gets the value of the specified column as a <see cref="T:System.Byte" />. </summary> <param name="ordinal">The zero-based column ordinal.</param> <returns>The value of the column.</returns> </member> <member name="M:Microsoft.Data.Sqlite.SqliteDataReader.GetChar(System.Int32)"> <summary> Gets the value of the specified column as a <see cref="T:System.Char" />. </summary> <param name="ordinal">The zero-based column ordinal.</param> <returns>The value of the column.</returns> </member> <member name="M:Microsoft.Data.Sqlite.SqliteDataReader.GetDateTime(System.Int32)"> <summary> Gets the value of the specified column as a <see cref="T:System.DateTime" />. </summary> <param name="ordinal">The zero-based column ordinal.</param> <returns>The value of the column.</returns> </member> <member name="M:Microsoft.Data.Sqlite.SqliteDataReader.GetDecimal(System.Int32)"> <summary> Gets the value of the specified column as a <see cref="T:System.Decimal" />. </summary> <param name="ordinal">The zero-based column ordinal.</param> <returns>The value of the column.</returns> </member> <member name="M:Microsoft.Data.Sqlite.SqliteDataReader.GetDouble(System.Int32)"> <summary> Gets the value of the specified column as a <see cref="T:System.Double" />. </summary> <param name="ordinal">The zero-based column ordinal.</param> <returns>The value of the column.</returns> </member> <member name="M:Microsoft.Data.Sqlite.SqliteDataReader.GetFloat(System.Int32)"> <summary> Gets the value of the specified column as a <see cref="T:System.Single" />. </summary> <param name="ordinal">The zero-based column ordinal.</param> <returns>The value of the column.</returns> </member> <member name="M:Microsoft.Data.Sqlite.SqliteDataReader.GetGuid(System.Int32)"> <summary> Gets the value of the specified column as a <see cref="T:System.Guid" />. </summary> <param name="ordinal">The zero-based column ordinal.</param> <returns>The value of the column.</returns> </member> <member name="M:Microsoft.Data.Sqlite.SqliteDataReader.GetInt16(System.Int32)"> <summary> Gets the value of the specified column as a <see cref="T:System.Int16" />. </summary> <param name="ordinal">The zero-based column ordinal.</param> <returns>The value of the column.</returns> </member> <member name="M:Microsoft.Data.Sqlite.SqliteDataReader.GetInt32(System.Int32)"> <summary> Gets the value of the specified column as a <see cref="T:System.Int32" />. </summary> <param name="ordinal">The zero-based column ordinal.</param> <returns>The value of the column.</returns> </member> <member name="M:Microsoft.Data.Sqlite.SqliteDataReader.GetInt64(System.Int32)"> <summary> Gets the value of the specified column as a <see cref="T:System.Int64" />. </summary> <param name="ordinal">The zero-based column ordinal.</param> <returns>The value of the column.</returns> </member> <member name="M:Microsoft.Data.Sqlite.SqliteDataReader.GetString(System.Int32)"> <summary> Gets the value of the specified column as a <see cref="T:System.String" />. </summary> <param name="ordinal">The zero-based column ordinal.</param> <returns>The value of the column.</returns> </member> <member name="M:Microsoft.Data.Sqlite.SqliteDataReader.GetBytes(System.Int32,System.Int64,System.Byte[],System.Int32,System.Int32)"> <summary> Reads a stream of bytes from the specified column. Not supported. </summary> <param name="ordinal">The zero-based column ordinal.</param> <param name="dataOffset">The index from which to begin the read operation.</param> <param name="buffer">The buffer into which the data is copied.</param> <param name="bufferOffset">The index to which the data will be copied.</param> <param name="length">The maximum number of bytes to read.</param> <returns>The actual number of bytes read.</returns> </member> <member name="M:Microsoft.Data.Sqlite.SqliteDataReader.GetChars(System.Int32,System.Int64,System.Char[],System.Int32,System.Int32)"> <summary> Reads a stream of characters from the specified column. Not supported. </summary> <param name="ordinal">The zero-based column ordinal.</param> <param name="dataOffset">The index from which to begin the read operation.</param> <param name="buffer">The buffer into which the data is copied.</param> <param name="bufferOffset">The index to which the data will be copied.</param> <param name="length">The maximum number of characters to read.</param> <returns>The actual number of characters read.</returns> </member> <member name="M:Microsoft.Data.Sqlite.SqliteDataReader.GetFieldValue``1(System.Int32)"> <summary> Gets the value of the specified column. </summary> <typeparam name="T">The type of the value.</typeparam> <param name="ordinal">The zero-based column ordinal.</param> <returns>The value of the column.</returns> </member> <member name="M:Microsoft.Data.Sqlite.SqliteDataReader.GetValue(System.Int32)"> <summary> Gets the value of the specified column. </summary> <param name="ordinal">The zero-based column ordinal.</param> <returns>The value of the column.</returns> </member> <member name="M:Microsoft.Data.Sqlite.SqliteDataReader.GetValues(System.Object[])"> <summary> Gets the column values of the current row. </summary> <param name="values">An array into which the values are copied.</param> <returns>The number of values copied into the array.</returns> </member> <member name="T:Microsoft.Data.Sqlite.SqliteException"> <summary> Represents a SQLite error. </summary> </member> <member name="M:Microsoft.Data.Sqlite.SqliteException.#ctor(System.String,System.Int32)"> <summary> Initializes a new instance of the <see cref="T:Microsoft.Data.Sqlite.SqliteException" /> class. </summary> <param name="message">The message to display for the exception. Can be null.</param> <param name="errorCode">The SQLite error code.</param> </member> <member name="P:Microsoft.Data.Sqlite.SqliteException.SqliteErrorCode"> <summary> Gets the SQLite error code. </summary> <value>The SQLite error code.</value> <seealso href="http://sqlite.org/rescode.html">SQLite Result Codes</seealso> </member> <member name="T:Microsoft.Data.Sqlite.SqliteFactory"> <summary> Creates instances of various Microsoft.Data.Sqlite classes. </summary> </member> <member name="F:Microsoft.Data.Sqlite.SqliteFactory.Instance"> <summary> The singleton instance. </summary> </member> <member name="M:Microsoft.Data.Sqlite.SqliteFactory.CreateCommand"> <summary> Creates a new command. </summary> <returns>The new command.</returns> </member> <member name="M:Microsoft.Data.Sqlite.SqliteFactory.CreateConnection"> <summary> Creates a new connection. </summary> <returns>The new connection.</returns> </member> <member name="M:Microsoft.Data.Sqlite.SqliteFactory.CreateConnectionStringBuilder"> <summary> Creates a new connection string builder. </summary> <returns>The new connection string builder.</returns> </member> <member name="M:Microsoft.Data.Sqlite.SqliteFactory.CreateParameter"> <summary> Creates a new parameter. </summary> <returns>The new parameter.</returns> </member> <member name="T:Microsoft.Data.Sqlite.SqliteOpenMode"> <summary> Represents the connection modes that can be used when opening a connection. </summary> </member> <member name="F:Microsoft.Data.Sqlite.SqliteOpenMode.ReadWriteCreate"> <summary> Opens the database for reading and writing, and creates it if it doesn't exist. </summary> </member> <member name="F:Microsoft.Data.Sqlite.SqliteOpenMode.ReadWrite"> <summary> Opens the database for reading and writing. </summary> </member> <member name="F:Microsoft.Data.Sqlite.SqliteOpenMode.ReadOnly"> <summary> Opens the database in read-only mode. </summary> </member> <member name="F:Microsoft.Data.Sqlite.SqliteOpenMode.Memory"> <summary> Opens an in-memory database. </summary> </member> <member name="T:Microsoft.Data.Sqlite.SqliteParameter"> <summary> Represents a parameter and its value in a <see cref="T:Microsoft.Data.Sqlite.SqliteCommand" />. </summary> <remarks>Due to SQLite's dynamic type system, parameter values are not converted.</remarks> <seealso href="http://sqlite.org/datatype3.html">Datatypes In SQLite Version 3</seealso> </member> <member name="M:Microsoft.Data.Sqlite.SqliteParameter.#ctor"> <summary> Initializes a new instance of the <see cref="T:Microsoft.Data.Sqlite.SqliteParameter" /> class. </summary> </member> <member name="M:Microsoft.Data.Sqlite.SqliteParameter.#ctor(System.String,System.Object)"> <summary> Initializes a new instance of the <see cref="T:Microsoft.Data.Sqlite.SqliteParameter" /> class. </summary> <param name="name">The name of the parameter.</param> <param name="value">The value of the parameter. Can be null.</param> </member> <member name="M:Microsoft.Data.Sqlite.SqliteParameter.#ctor(System.String,Microsoft.Data.Sqlite.SqliteType)"> <summary> Initializes a new instance of the <see cref="T:Microsoft.Data.Sqlite.SqliteParameter" /> class. </summary> <param name="name">The name of the parameter.</param> <param name="type">The type of the parameter.</param> </member> <member name="M:Microsoft.Data.Sqlite.SqliteParameter.#ctor(System.String,Microsoft.Data.Sqlite.SqliteType,System.Int32)"> <summary> Initializes a new instance of the <see cref="T:Microsoft.Data.Sqlite.SqliteParameter" /> class. </summary> <param name="name">The name of the parameter.</param> <param name="type">The type of the parameter.</param> <param name="size">The maximum size, in bytes, of the parameter.</param> </member> <member name="M:Microsoft.Data.Sqlite.SqliteParameter.#ctor(System.String,Microsoft.Data.Sqlite.SqliteType,System.Int32,System.String)"> <summary> Initializes a new instance of the <see cref="T:Microsoft.Data.Sqlite.SqliteParameter" /> class. </summary> <param name="name">The name of the parameter.</param> <param name="type">The type of the parameter.</param> <param name="size">The maximum size, in bytes, of the parameter.</param> <param name="sourceColumn">The source column used for loading the value. Can be null.</param> </member> <member name="P:Microsoft.Data.Sqlite.SqliteParameter.DbType"> <summary> Gets or sets the type of the parameter. </summary> <value>The type of the parameter.</value> <remarks>Due to SQLite's dynamic type system, parameter values are not converted.</remarks> <seealso href="http://sqlite.org/datatype3.html">Datatypes In SQLite Version 3</seealso> </member> <member name="P:Microsoft.Data.Sqlite.SqliteParameter.SqliteType"> <summary> Gets or sets the SQLite type of the parameter. </summary> <value>The SQLite type of the parameter.</value> <remarks>Due to SQLite's dynamic type system, parameter values are not converted.</remarks> <seealso href="http://sqlite.org/datatype3.html">Datatypes In SQLite Version 3</seealso> </member> <member name="P:Microsoft.Data.Sqlite.SqliteParameter.Direction"> <summary> Gets or sets the direction of the parameter. Only <see cref="F:System.Data.ParameterDirection.Input" /> is supported. </summary> <value>The direction of the parameter.</value> </member> <member name="P:Microsoft.Data.Sqlite.SqliteParameter.IsNullable"> <summary> Gets or sets a value indicating whether the parameter is nullable. </summary> <value>A value indicating whether the parameter is nullable.</value> </member> <member name="P:Microsoft.Data.Sqlite.SqliteParameter.ParameterName"> <summary> Gets or sets the name of the parameter. </summary> <value>The name of the parameter.</value> </member> <member name="P:Microsoft.Data.Sqlite.SqliteParameter.Size"> <summary> Gets or sets the maximum size, in bytes, of the parameter. </summary> <value>The maximum size, in bytes, of the parameter.</value> </member> <member name="P:Microsoft.Data.Sqlite.SqliteParameter.SourceColumn"> <summary> Gets or sets the source column used for loading the value. </summary> <value>The source column used for loading the value.</value> </member> <member name="P:Microsoft.Data.Sqlite.SqliteParameter.SourceColumnNullMapping"> <summary> Gets or sets a value indicating whether the source column is nullable. </summary> <value>A value indicating whether the source column is nullable.</value> </member> <member name="P:Microsoft.Data.Sqlite.SqliteParameter.SourceVersion"> <summary> Gets or sets the version to use when loading the value. </summary> <value>The version to use when loading the value.</value> </member> <member name="P:Microsoft.Data.Sqlite.SqliteParameter.Value"> <summary> Gets or sets the value of the parameter. </summary> <value>The value of the parameter.</value> <remarks>Due to SQLite's dynamic type system, parameter values are not converted.</remarks> <seealso href="http://sqlite.org/datatype3.html">Datatypes In SQLite Version 3</seealso> </member> <member name="M:Microsoft.Data.Sqlite.SqliteParameter.ResetDbType"> <summary> Resets the <see cref="P:Microsoft.Data.Sqlite.SqliteParameter.DbType" /> property to its original value. </summary> </member> <member name="M:Microsoft.Data.Sqlite.SqliteParameter.ResetSqliteType"> <summary> Resets the <see cref="P:Microsoft.Data.Sqlite.SqliteParameter.SqliteType" /> property to its original value. </summary> </member> <member name="T:Microsoft.Data.Sqlite.SqliteParameterCollection"> <summary> Represents a collection of SQLite parameters. </summary> </member> <member name="M:Microsoft.Data.Sqlite.SqliteParameterCollection.#ctor"> <summary> Initializes a new instance of the <see cref="T:Microsoft.Data.Sqlite.SqliteParameterCollection" /> class. </summary> </member> <member name="P:Microsoft.Data.Sqlite.SqliteParameterCollection.Count"> <summary> Gets the number of items in the collection. </summary> <value>The number of items in the collection.</value> </member> <member name="P:Microsoft.Data.Sqlite.SqliteParameterCollection.SyncRoot"> <summary> Gets the object used to synchronize access to the collection. </summary> <value>The object used to synchronize access to the collection.</value> </member> <member name="P:Microsoft.Data.Sqlite.SqliteParameterCollection.IsFixedSize"> <summary> Gets a value indicating whether the collection is a fixed size. </summary> <value>A value indicating whether the collection is a fixed size.</value> </member> <member name="P:Microsoft.Data.Sqlite.SqliteParameterCollection.IsReadOnly"> <summary> Gets a value indicating whether the collection is read-only. </summary> <value>A value indicating whether the collection is read-only.</value> </member> <member name="P:Microsoft.Data.Sqlite.SqliteParameterCollection.IsSynchronized"> <summary> Gets a value indicating whether the collection is synchronized. </summary> <value>A value indicating whether the collection is synchronized.</value> </member> <member name="P:Microsoft.Data.Sqlite.SqliteParameterCollection.Item(System.Int32)"> <summary> Gets or sets the parameter at the specified index. </summary> <param name="index">The zero-based index of the parameter.</param> <returns>The parameter.</returns> </member> <member name="P:Microsoft.Data.Sqlite.SqliteParameterCollection.Item(System.String)"> <summary> Gets or sets the parameter with the specified name. </summary> <param name="parameterName">The name of the parameter.</param> <returns>The parameter.</returns> </member> <member name="M:Microsoft.Data.Sqlite.SqliteParameterCollection.Add(System.Object)"> <summary> Adds a parameter to the collection. </summary> <param name="value">The parameter to add. Must be a <see cref="T:Microsoft.Data.Sqlite.SqliteParameter" />.</param> <returns>The zero-based index of the parameter that was added.</returns> </member> <member name="M:Microsoft.Data.Sqlite.SqliteParameterCollection.Add(Microsoft.Data.Sqlite.SqliteParameter)"> <summary> Adds a parameter to the collection. </summary> <param name="value">The parameter to add.</param> <returns>The parameter that was added.</returns> </member> <member name="M:Microsoft.Data.Sqlite.SqliteParameterCollection.Add(System.String,Microsoft.Data.Sqlite.SqliteType)"> <summary> Adds a parameter to the collection. </summary> <param name="parameterName">The name of the parameter.</param> <param name="type">The SQLite type of the parameter.</param> <returns>The parameter that was added.</returns> </member> <member name="M:Microsoft.Data.Sqlite.SqliteParameterCollection.Add(System.String,Microsoft.Data.Sqlite.SqliteType,System.Int32)"> <summary> Adds a parameter to the collection. </summary> <param name="parameterName">The name of the parameter.</param> <param name="type">The SQLite type of the parameter.</param> <param name="size">The maximum size, in bytes, of the parameter.</param> <returns>The parameter that was added.</returns> </member> <member name="M:Microsoft.Data.Sqlite.SqliteParameterCollection.Add(System.String,Microsoft.Data.Sqlite.SqliteType,System.Int32,System.String)"> <summary> Adds a parameter to the collection. </summary> <param name="parameterName">The name of the parameter.</param> <param name="type">The SQLite type of the parameter.</param> <param name="size">The maximum size, in bytes, of the parameter.</param> <param name="sourceColumn"> The source column used for loading the value of the parameter. Can be null. </param> <returns>The parameter that was added.</returns> </member> <member name="M:Microsoft.Data.Sqlite.SqliteParameterCollection.AddRange(System.Array)"> <summary> Adds multiple parameters to the collection. </summary> <param name="values"> An array of parameters to add. They must be <see cref="T:Microsoft.Data.Sqlite.SqliteParameter" /> objects. </param> </member> <member name="M:Microsoft.Data.Sqlite.SqliteParameterCollection.AddRange(System.Collections.Generic.IEnumerable{Microsoft.Data.Sqlite.SqliteParameter})"> <summary> Adds multiple parameters to the collection. </summary> <param name="values">The parameters to add.</param> </member> <member name="M:Microsoft.Data.Sqlite.SqliteParameterCollection.AddWithValue(System.String,System.Object)"> <summary> Adds a parameter to the collection. </summary> <param name="parameterName">The name of the parameter.</param> <param name="value">The value of the parameter. Can be null.</param> <returns>The parameter that was added.</returns> </member> <member name="M:Microsoft.Data.Sqlite.SqliteParameterCollection.Clear"> <summary> Removes all parameters from the collection. </summary> </member> <member name="M:Microsoft.Data.Sqlite.SqliteParameterCollection.Contains(System.Object)"> <summary> Gets a value indicating whether the collection contains the specified parameter. </summary> <param name="value">The parameter to look for. Must be a <see cref="T:Microsoft.Data.Sqlite.SqliteParameter" />.</param> <returns>true if the collection contains the parameter; otherwise, false.</returns> </member> <member name="M:Microsoft.Data.Sqlite.SqliteParameterCollection.Contains(Microsoft.Data.Sqlite.SqliteParameter)"> <summary> Gets a value indicating whether the collection contains the specified parameter. </summary> <param name="value">The parameter to look for.</param> <returns>true if the collection contains the parameter; otherwise, false.</returns> </member> <member name="M:Microsoft.Data.Sqlite.SqliteParameterCollection.Contains(System.String)"> <summary> Gets a value indicating whether the collection contains a parameter with the specified name. </summary> <param name="value">The name of the parameter.</param> <returns>true if the collection contains the parameter; otherwise, false.</returns> </member> <member name="M:Microsoft.Data.Sqlite.SqliteParameterCollection.CopyTo(System.Array,System.Int32)"> <summary> Copies the collection to an array of parameters. </summary> <param name="array"> The array into which the parameters are copied. Must be an array of <see cref="T:Microsoft.Data.Sqlite.SqliteParameter" /> objects. </param> <param name="index">The zero-based index to which the parameters are copied.</param> </member> <member name="M:Microsoft.Data.Sqlite.SqliteParameterCollection.CopyTo(Microsoft.Data.Sqlite.SqliteParameter[],System.Int32)"> <summary> Copies the collection to an array of parameters. </summary> <param name="array">The array into which the parameters are copied.</param> <param name="index">The zero-based index to which the parameters are copied.</param> </member> <member name="M:Microsoft.Data.Sqlite.SqliteParameterCollection.GetEnumerator"> <summary> Gets an enumerator that iterates through the collection. </summary> <returns>The enumerator.</returns> </member> <member name="M:Microsoft.Data.Sqlite.SqliteParameterCollection.GetParameter(System.Int32)"> <summary> Gets a parameter at the specified index. </summary> <param name="index">The zero-based index of the parameter.</param> <returns>The parameter.</returns> </member> <member name="M:Microsoft.Data.Sqlite.SqliteParameterCollection.GetParameter(System.String)"> <summary> Gets a parameter with the specified name. </summary> <param name="parameterName">The name of the parameter.</param> <returns>The parameter.</returns> </member> <member name="M:Microsoft.Data.Sqlite.SqliteParameterCollection.IndexOf(System.Object)"> <summary> Gets the index of the specified parameter. </summary> <param name="value">The parameter. Must be a <see cref="T:Microsoft.Data.Sqlite.SqliteParameter" />.</param> <returns>The zero-based index of the parameter.</returns> </member> <member name="M:Microsoft.Data.Sqlite.SqliteParameterCollection.IndexOf(Microsoft.Data.Sqlite.SqliteParameter)"> <summary> Gets the index of the specified parameter. </summary> <param name="value">The parameter.</param> <returns>The zero-based index of the parameter.</returns> </member> <member name="M:Microsoft.Data.Sqlite.SqliteParameterCollection.IndexOf(System.String)"> <summary> Gets the index of the parameter with the specified name. </summary> <param name="parameterName">The name of the parameter.</param> <returns>The zero-based index of the parameter or -1 if not found.</returns> </member> <member name="M:Microsoft.Data.Sqlite.SqliteParameterCollection.Insert(System.Int32,System.Object)"> <summary> Inserts a parameter into the collection at the specified index. </summary> <param name="index">The zero-based index at which the parameter should be inserted.</param> <param name="value">The parameter to insert. Must be a <see cref="T:Microsoft.Data.Sqlite.SqliteParameter" />.</param> </member> <member name="M:Microsoft.Data.Sqlite.SqliteParameterCollection.Insert(System.Int32,Microsoft.Data.Sqlite.SqliteParameter)"> <summary> Inserts a parameter into the collection at the specified index. </summary> <param name="index">The zero-based index at which the parameter should be inserted.</param> <param name="value">The parameter to insert.</param> </member> <member name="M:Microsoft.Data.Sqlite.SqliteParameterCollection.Remove(System.Object)"> <summary> Removes a parameter from the collection. </summary> <param name="value">The parameter to remove. Must be a <see cref="T:Microsoft.Data.Sqlite.SqliteParameter" />.</param> </member> <member name="M:Microsoft.Data.Sqlite.SqliteParameterCollection.Remove(Microsoft.Data.Sqlite.SqliteParameter)"> <summary> Removes a parameter from the collection. </summary> <param name="value">The parameter to remove.</param> </member> <member name="M:Microsoft.Data.Sqlite.SqliteParameterCollection.RemoveAt(System.Int32)"> <summary> Removes a parameter from the collection at the specified index. </summary> <param name="index">The zero-based index of the parameter to remove.</param> </member> <member name="M:Microsoft.Data.Sqlite.SqliteParameterCollection.RemoveAt(System.String)"> <summary> Removes a parameter with the specified name from the collection. </summary> <param name="parameterName">The name of the parameter to remove.</param> </member> <member name="M:Microsoft.Data.Sqlite.SqliteParameterCollection.SetParameter(System.Int32,System.Data.Common.DbParameter)"> <summary> Sets the parameter at the specified index. </summary> <param name="index">The zero-based index of the parameter to set.</param> <param name="value">The parameter. Must be a <see cref="T:Microsoft.Data.Sqlite.SqliteParameter" />.</param> </member> <member name="M:Microsoft.Data.Sqlite.SqliteParameterCollection.SetParameter(System.String,System.Data.Common.DbParameter)"> <summary> Sets the parameter with the specified name. </summary> <param name="parameterName">The name of the parameter to set.</param> <param name="value">The parameter. Must be a <see cref="T:Microsoft.Data.Sqlite.SqliteParameter" />.</param> </member> <member name="T:Microsoft.Data.Sqlite.SqliteTransaction"> <summary> Represents a transaction made against a SQLite database. </summary> </member> <member name="P:Microsoft.Data.Sqlite.SqliteTransaction.Connection"> <summary> Gets the connection associated with the transaction. </summary> <value>The connection associated with the transaction.</value> </member> <member name="P:Microsoft.Data.Sqlite.SqliteTransaction.DbConnection"> <summary> Gets the connection associated with the transaction. </summary> <value>The connection associated with the transaction.</value> </member> <member name="P:Microsoft.Data.Sqlite.SqliteTransaction.IsolationLevel"> <summary> Gets the isolation level for the transaction. This cannot be changed if the transaction is completed or closed. </summary> <value>The isolation level for the transaction.</value> </member> <member name="M:Microsoft.Data.Sqlite.SqliteTransaction.Commit"> <summary> Applies the changes made in the transaction. </summary> </member> <member name="M:Microsoft.Data.Sqlite.SqliteTransaction.Rollback"> <summary> Reverts the changes made in the transaction. </summary> </member> <member name="M:Microsoft.Data.Sqlite.SqliteTransaction.Dispose(System.Boolean)"> <summary> Releases any resources used by the transaction and rolls it back. </summary> <param name="disposing"> true to release managed and unmanaged resources; false to release only unmanaged resources. </param> </member> <member name="T:Microsoft.Data.Sqlite.SqliteType"> <summary> Represents the type affinities used by columns in SQLite tables. </summary> <seealso href="http://sqlite.org/datatype3.html">Datatypes In SQLite Version 3</seealso> </member> <member name="F:Microsoft.Data.Sqlite.SqliteType.Integer"> <summary> A signed integer. </summary> </member> <member name="F:Microsoft.Data.Sqlite.SqliteType.Real"> <summary> A floating point value. </summary> </member> <member name="F:Microsoft.Data.Sqlite.SqliteType.Text"> <summary> A text string. </summary> </member> <member name="F:Microsoft.Data.Sqlite.SqliteType.Blob"> <summary> A blob of data. </summary> </member> <member name="T:Microsoft.Data.Sqlite.Internal.SqliteEngine"> <summary> Enables configuration of global SQLite settings. This API may change or be removed in future releases. </summary> </member> <member name="M:Microsoft.Data.Sqlite.Internal.SqliteEngine.UseWinSqlite3"> <summary> Configures Microsoft.Data.Sqlite to use winsqlite3.dll. This is a version of SQLite that ships in Windows 10. This method must be called before any other interaction with SQLite. This API may change or be removed in future releases. </summary> </member> <member name="M:Microsoft.Data.Sqlite.Strings.CallRequiresOpenConnection(System.Object)"> <summary> {methodName} can only be called when the connection is open. </summary> </member> <member name="M:Microsoft.Data.Sqlite.Strings.CallRequiresSetCommandText(System.Object)"> <summary> CommandText must be set before {methodName} can be called. </summary> </member> <member name="P:Microsoft.Data.Sqlite.Strings.ConnectionStringRequiresClosedConnection"> <summary> ConnectionString cannot be set when the connection is open. </summary> </member> <member name="M:Microsoft.Data.Sqlite.Strings.DataReaderClosed(System.Object)"> <summary> Invalid attempt to call {operation} when reader is closed. </summary> </member> <member name="M:Microsoft.Data.Sqlite.Strings.InvalidCacheMode(System.Object)"> <summary> The cache mode '{mode}' is invalid. </summary> </member> <member name="M:Microsoft.Data.Sqlite.Strings.InvalidCommandBehavior(System.Object)"> <summary> The CommandBehavior '{behavior}' is invalid. </summary> </member> <member name="M:Microsoft.Data.Sqlite.Strings.InvalidCommandType(System.Object)"> <summary> The CommandType '{commandType}' is invalid. </summary> </member> <member name="M:Microsoft.Data.Sqlite.Strings.InvalidIsolationLevel(System.Object)"> <summary> The IsolationLevel '{isolationLevel}' is invalid. </summary> </member> <member name="M:Microsoft.Data.Sqlite.Strings.InvalidIsolationLevelForUnsharedCache(System.Object)"> <summary> The IsolationLevel '{isolationLevel}' can only be used with a shared cache. Set 'Cache=Shared' in the connection string. </summary> </member> <member name="M:Microsoft.Data.Sqlite.Strings.InvalidParameterDirection(System.Object)"> <summary> The ParameterDirection '{direction}' is invalid. </summary> </member> <member name="M:Microsoft.Data.Sqlite.Strings.KeywordNotSupported(System.Object)"> <summary> Keyword not supported: '{keyword}'. </summary> </member> <member name="M:Microsoft.Data.Sqlite.Strings.MissingParameters(System.Object)"> <summary> Must add values for the following parameters: {parameters} </summary> </member> <member name="P:Microsoft.Data.Sqlite.Strings.NoData"> <summary> No data exists for the row/column. </summary> </member> <member name="P:Microsoft.Data.Sqlite.Strings.OpenRequiresSetConnectionString"> <summary> ConnectionString must be set before Open can be called. </summary> </member> <member name="P:Microsoft.Data.Sqlite.Strings.ParallelTransactionsNotSupported"> <summary> SqliteConnection does not support nested transactions. </summary> </member> <member name="M:Microsoft.Data.Sqlite.Strings.ParameterNotFound(System.Object)"> <summary> A SqliteParameter with ParameterName '{parameterName}' is not contained by this SqliteParameterCollection. </summary> </member> <member name="M:Microsoft.Data.Sqlite.Strings.RequiresSet(System.Object)"> <summary> {propertyName} must be set. </summary> </member> <member name="P:Microsoft.Data.Sqlite.Strings.TransactionCompleted"> <summary> This SqliteTransaction has completed; it is no longer usable. </summary> </member> <member name="P:Microsoft.Data.Sqlite.Strings.TransactionConnectionMismatch"> <summary> The transaction object is not associated with the connection object. </summary> </member> <member name="P:Microsoft.Data.Sqlite.Strings.TransactionRequired"> <summary> Execute requires the command to have a transaction object when the connection assigned to the command is in a pending local transaction. The Transaction property of the command has not been initialized. </summary> </member> <member name="M:Microsoft.Data.Sqlite.Strings.UnknownDataType(System.Object)"> <summary> No mapping exists from object type {typeName} to a known managed provider native type. </summary> </member> <member name="M:Microsoft.Data.Sqlite.Strings.SqliteNativeError(System.Object,System.Object)"> <summary> SQLite Error {errorCode}: '{message}'. </summary> </member> <member name="P:Microsoft.Data.Sqlite.Strings.DefaultNativeError"> <summary> For more information on this error code see http://sqlite.org/rescode.html </summary> </member> <member name="M:Microsoft.Data.Sqlite.Strings.AmbiguousParameterName(System.Object)"> <summary> Cannot bind the value for parameter '{parameterName}' because multiple matching parameters were found in the command text. Specify the parameter name with the symbol prefix, e.g. '@{parameterName}'. </summary> </member> <member name="P:Microsoft.Data.Sqlite.Strings.AlreadyLoaded"> <summary> The SQLite library is already loaded. UseWinSqlite3 must be called before using SQLite. </summary> </member> <member name="M:Microsoft.Data.Sqlite.Strings.InvalidEnumValue(System.Object,System.Object)"> <summary> The {enumType} enumeration value, {value}, is invalid. </summary> </member> <member name="M:Microsoft.Data.Sqlite.Strings.ConvertFailed(System.Object,System.Object)"> <summary> Cannot convert object of type '{sourceType}' to object of type '{targetType}'. </summary> </member> <member name="P:Microsoft.Data.Sqlite.Strings.CannotStoreNaN"> <summary> Cannot store 'NaN' values. </summary> </member> </members> </doc> |