PowerShell/Invoke-PowerShell.ps1

# Copyright 2012 Aaron Jensen
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

function Invoke-PowerShell
{
    <#
    .SYNOPSIS
    Invokes a script block in a separate powershell.exe process.
     
    .DESCRIPTION
    If using PowerShell v2.0, the invoked PowerShell process can run under the .NET 4.0 CLR (using `v4.0` as the value to the Runtime parameter).
 
    If using PowerShell v3.0, you can *only* run script blocks under a `v4.0` CLR. PowerShell converts script blocks to an encoded command, and when running encoded commands, PowerShell doesn't allow the `-Version` parameter for running PowerShell under a different version. To run code under a .NET 2.0 CLR from PowerShell 3, use the `FilePath` parameter to run a specfic script.
     
    This function launches a PowerShell process that matches the architecture of the *operating system*. On 64-bit operating systems, you can run under 32-bit PowerShell by specifying the `x86` switch).
 
    PowerShell's execution policy has to be set seperately in all architectures (i.e. x86 and x64), so you may get an error message about script being disabled. Use the `-ExecutionPolicy` parameter to set a temporary execution policy when running a script.
     
    .EXAMPLE
    Invoke-PowerShell -Command { $PSVersionTable }
     
    Runs a separate PowerShell process which matches the architecture of the operating system, returning the $PSVersionTable from that process. This will fail under 32-bit PowerShell on a 64-bit operating system.
     
    .EXAMPLE
    Invoke-PowerShell -Command { $PSVersionTable } -x86
     
    Runs a 32-bit PowerShell process, return the $PSVersionTable from that process.
     
    .EXAMPLE
    Invoke-PowerShell -Command { $PSVersionTable } -Runtime v4.0
     
    Runs a separate PowerShell process under the v4.0 .NET CLR, returning the $PSVersionTable from that process. Should return a CLRVersion of `4.0`.
     
    .EXAMPLE
    Invoke-PowerShell -FilePath C:\Projects\Carbon\bin\Set-DotNetConnectionString.ps1 -ArgumentList '-Name','myConn','-Value',"'data source=.\DevDB;Integrated Security=SSPI;'"
     
    Runs the `Set-DotNetConnectionString.ps1` script with `ArgumentList` as arguments/parameters.
     
    Note that you have to double-quote any arguments with spaces. Otherwise, the argument gets interpreted as multiple arguments.
 
    .EXAMPLE
    Invoke-PowerShell -FilePath Get-PsVersionTable.ps1 -x86 -ExecutionPolicy RemoteSigned
 
    Shows how to run powershell.exe with a custom executin policy, in case the running of scripts is disabled.
    #>

    [CmdletBinding(DefaultParameterSetName='ScriptBlock')]
    param(
        [Parameter(Mandatory=$true,ParameterSetName='ScriptBlock')]
        [Alias('Command')]
        [ScriptBlock]
        # The command to run.
        $ScriptBlock,
        
        [Parameter(Mandatory=$true,ParameterSetName='FilePath')]
        [string]
        # The script to run.
        $FilePath,
        
        [object[]]
        [Alias('Args')]
        # Any arguments to pass to the command/scripts.
        $ArgumentList,
        
        [string]
        # Determines how output from the PowerShel command is formatted
        $OutputFormat,

        [Parameter(ParameterSetName='FilePath')]
        [Microsoft.PowerShell.ExecutionPolicy]
        # The execution policy to use when running a script. By default, execution policies are set to `Restricted`. If running an architecture of PowerShell whose execution policy isn't set, `Invoke-PowerShell` will fail.
        $ExecutionPolicy,
        
        [Switch]
        # Run the x86 (32-bit) version of PowerShell, otherwise the version which matches the OS architecture is run, *regardless of the architecture of the currently running process*.
        $x86,
        
        [string]
        [ValidateSet('v2.0','v4.0')]
        # The CLR to use. Must be one of `v2.0` or `v4.0`. Default is the current PowerShell runtime.
        $Runtime
    )
    
    $powerShellv3Installed = Test-Path -Path HKLM:\SOFTWARE\Microsoft\PowerShell\3
    $currentRuntime = 'v{0}.0' -f $PSVersionTable.CLRVersion.Major
    if( $powerShellv3Installed )
    {
        $currentRuntime = 'v4.0'
    }

    # Check that the selected runtime is installed.
    if( $PSBoundParameters.ContainsKey('Runtime') )
    {
        $runtimeInstalled = switch( $Runtime )
        {
            'v2.0' { Test-DotNet -V2 }
            'v4.0' { Test-DotNet -V4 -Full }
            default { Write-Error ('Unknown runtime value ''{0}''.' -f $Runtime) }
        }

        if( -not $runtimeInstalled )
        {
            Write-Error ('.NET {0} not found.' -f $Runtime)
            return
        }
    }


    if( -not $Runtime )
    {
        $Runtime = $currentRuntime
    }

    if(  $PSCmdlet.ParameterSetName -eq 'ScriptBlock' -and `
         $Host.Name -eq 'Windows PowerShell ISE Host' -and `
         $Runtime -eq 'v2.0' -and `
         $powerShellv3Installed )
    {
        Write-Error ('The PowerShell ISE v{0} can''t run script blocks under .NET {1}. Please run from the PowerShell console, or save your script block into a file and re-run Invoke-PowerShell using the `FilePath` parameter.' -f `
                        $PSVersionTable.PSVersion,$Runtime)
        return
    }

    $comPlusAppConfigEnvVarName = 'COMPLUS_ApplicationMigrationRuntimeActivationConfigPath'
    $activationConfigDir = Join-Path $env:TEMP ([IO.Path]::GetRandomFileName())
    $activationConfigPath = Join-Path $activationConfigDir powershell.exe.activation_config
    $originalCOMAppConfigEnvVar = [Environment]::GetEnvironmentVariable( $comPlusAppConfigEnvVarName )
    if( -not $powerShellv3Installed -and $currentRuntime -ne $Runtime )
    {
        $null = New-Item -Path $activationConfigDir -ItemType Directory
        @"
<?xml version="1.0" encoding="utf-8" ?>
<configuration>
  <startup useLegacyV2RuntimeActivationPolicy="true">
    <supportedRuntime version="{0}" />
  </startup>
</configuration>
"@
 -f $Runtime | Out-File -FilePath $activationConfigPath -Encoding OEM
        Set-EnvironmentVariable -Name $comPlusAppConfigEnvVarName -Value $activationConfigDir -ForProcess
    }
    
    $params = @{ }
    if( $x86 )
    {
        $params.x86 = $true
    }
    
    try
    {
        $psPath = Get-PowerShellPath @params
        if( $ArgumentList -eq $null )
        {
            $ArgumentList = @()
        }
        $powerShellArgs = @( )
        if( $powerShellv3Installed -and $Runtime -eq 'v2.0' )
        {
            $powerShellArgs += '-Version'
            $powerShellArgs += '2.0'
        }

        $powerShellArgs += '-NoProfile'

        if( $OutputFormat )
        {
            $powerShellArgs += '-OutputFormat'
            $powerShellArgs += $OutputFormat
        }

        if( $PSCmdlet.ParameterSetName -eq 'ScriptBlock' )
        {
            & $psPath $powerShellArgs -Command $ScriptBlock -Args $ArgumentList
        }
        else
        {
            if( $ExecutionPolicy )
            {
                $powerShellArgs += '-ExecutionPolicy'
                $powerShellArgs += $ExecutionPolicy
            }
            Write-Verbose ('{0} {1} -Command {2} {3}' -f $psPath,($powerShellArgs -join " "),$FilePath,($ArgumentList -join ' '))
            & $psPath $powerShellArgs -File $FilePath $ArgumentList
            Write-Verbose ('LASTEXITCODE: {0}' -f $LASTEXITCODE)
        }
    }
    finally
    {
        if( Test-Path -Path $activationConfigDir -PathType Leaf )
        {
            Remove-Item -Path $activationConfigDir -Recurse -Force
        }

        if( Test-Path -Path env:$comPlusAppConfigEnvVarName )
        {
            if( $originalCOMAppConfigEnvVar )
            {
                Set-EnvironmentVariable -Name $comPlusAppConfigEnvVarName -Value $originalCOMAppConfigEnvVar -ForProcess
            }
            else
            {
                Remove-EnvironmentVariable -Name $comPlusAppConfigEnvVarName -ForProcess
            }
        }
    }
}