ContinuousAssurance/ContinuousAssurance.ps1
|
Set-StrictMode -Version Latest function Install-AzSKContinuousAssurance { <# .SYNOPSIS This command would help in installing Automation Account in your subscription to setup Continuous Assurance feature of AzSK .DESCRIPTION This command will install an Automation Account (Name: AzSKContinuousAssurance) which runs security scan on subscription and resource groups which are specified during installation. Security scan results will be populated in Log Analytics workspace which is configured during installation. Also, detailed logs will be stored in storage account (Name: azskyyyyMMddHHmmss format). .PARAMETER SubscriptionId Subscription id in which Automation Account needs to be installed. .PARAMETER AutomationAccountLocation Location of resource group which contains Automation Account. This is optional. Default location is EastUS2. .PARAMETER AutomationAccountRGName Name of ResourceGroup where AutomationAccount will be installed. .PARAMETER AutomationAccountName Name of AutomationAccount. Default value is AzSKContinuousAssurance. .PARAMETER ResourceGroupNames Comma separated Application resource group names on which security scan should be performed by Automation Account. .PARAMETER LAWSId Workspace ID of Log Analytics workspace where security scan results will be sent .PARAMETER LAWSSharedKey Shared key of Log Analytics workspace which is used to monitor security scan results. .PARAMETER LoggingOption Gives the flexibility for the users to choose from central sub reports storage mode vs individual sub reports storage in CA Scaling scenario. .PARAMETER AzureADAppName Name for the Azure Active Directory (AD) Application that will be created in the subscription for running the runbook. .PARAMETER AltLAWSId Workspace ID of alternate Log Analytics workspace to monitor security scan results. .PARAMETER AltLAWSSharedKey Shared key of alternate Log Analytics workspace which is used to monitor security scan results. .PARAMETER WebhookUrl All the scan results shall be posted to this configured webhook. .PARAMETER WebhookAuthZHeaderName Name of the AuthZ header. (typically 'Authorization') .PARAMETER WebhookAuthZHeaderValue Value of the AuthZ header. .PARAMETER ScanIntervalInHours Overrides the default scan interval (24hrs) with the custom provided value. .PARAMETER LoggingOption This provides the capability to users to store the CA scan logs on central subscription or on individual subscriptions. .PARAMETER SkipTargetSubscriptionConfig It would skip all the required central scanning configuration on the targets subs. It is owners responsibility to get the target subs configured correctly. .PARAMETER TargetSubscriptionIds Comma separated values of target subscriptionIds that will be monitored through CA from a central subscription. .PARAMETER CentralScanMode This enables AzSK CA in central scanning mode. Use this switch along with TargetSubscriptionIds param to register target subscriptions in the central CA. .PARAMETER DoNotOpenOutputFolder Switch to specify whether to open output folder. .NOTES .LINK https://aka.ms/azskossdocs #> Param( [Parameter(Position = 0, Mandatory = $true, ParameterSetName = "Default", HelpMessage="Id of the subscription in which Automation Account needs to be installed.")] [Parameter(Position = 0, Mandatory = $true, ParameterSetName = "CentralScanMode", HelpMessage="Id of the subscription in which Automation Account needs to be installed.")] [string] [Alias("sid", "HostSubscriptionId", "hsid")] $SubscriptionId , [Parameter(Mandatory = $true, ParameterSetName = "CentralScanMode", HelpMessage="Comma separated values of target subscriptionIds that will be monitored through CA from a central subscription.")] [string] [Alias("tsids")] $TargetSubscriptionIds, [Parameter(Mandatory = $false, ParameterSetName = "CentralScanMode")] [Parameter(Mandatory = $false, ParameterSetName = "Default")] [string] [Alias("loc")] $AutomationAccountLocation, [Parameter(Mandatory = $false, ParameterSetName = "CentralScanMode")] [Parameter(Mandatory = $false, ParameterSetName = "Default")] [string] [Alias("aargn")] $AutomationAccountRGName, [Parameter(Mandatory = $false, ParameterSetName = "CentralScanMode")] [Parameter(Mandatory = $false, ParameterSetName = "Default")] [string] [Alias("aan")] $AutomationAccountName, [Parameter(Position = 1, Mandatory = $true, ParameterSetName = "CentralScanMode")] [Parameter(Position = 1, Mandatory = $true, ParameterSetName = "Default")] [string] [ValidateNotNullOrEmpty()] [Alias("rgns")] $ResourceGroupNames , [Parameter(Position = 2, Mandatory = $true, ParameterSetName = "CentralScanMode", HelpMessage="Workspace ID of Log Analytics workspace where security scan results will be populated.")] [Parameter(Position = 2, Mandatory = $true, ParameterSetName = "Default", HelpMessage="Workspace ID of Log Analytics workspace where security scan results will be populated.")] [string] [ValidateNotNullOrEmpty()] [Alias("lwid","wid","OMSWorkspaceId")] $LAWSId, [Parameter(Position = 3, Mandatory = $true, ParameterSetName = "CentralScanMode", HelpMessage="Shared key of Log Analytics workspace which is used to monitor security scan results.")] [Parameter(Position = 3, Mandatory = $true, ParameterSetName = "Default", HelpMessage="Shared key of Log Analytics workspace which is used to monitor security scan results.")] [string] [ValidateNotNullOrEmpty()] [Alias("lwkey","wkey","OMSSharedKey")] $LAWSSharedKey, [Parameter(Mandatory = $false, ParameterSetName = "Default")] [Parameter(Mandatory = $false, ParameterSetName = "CentralScanMode")] [ValidateNotNullOrEmpty()] [string] [Alias("alwid","awid","AltOMSWorkspaceId")] $AltLAWSId, [Parameter(Mandatory = $false, ParameterSetName = "Default")] [Parameter(Mandatory = $false, ParameterSetName = "CentralScanMode")] [ValidateNotNullOrEmpty()] [string] [Alias("alkey","awkey","AltOMSSharedKey")] $AltLAWSSharedKey, [Parameter(Mandatory = $false, ParameterSetName = "Default")] [Parameter(Mandatory = $false, ParameterSetName = "CentralScanMode")] [ValidateNotNullOrEmpty()] [string] [Alias("wurl")] $WebhookUrl, [Parameter(Mandatory = $false, ParameterSetName = "Default")] [Parameter(Mandatory = $false, ParameterSetName = "CentralScanMode")] [ValidateNotNullOrEmpty()] [string] [Alias("whn")] $WebhookAuthZHeaderName, [Parameter(Mandatory = $false, ParameterSetName = "Default")] [Parameter(Mandatory = $false, ParameterSetName = "CentralScanMode")] [ValidateNotNullOrEmpty()] [string] [Alias("whv")] $WebhookAuthZHeaderValue, [Parameter(Mandatory = $false, ParameterSetName = "CentralScanMode")] [Parameter(Mandatory = $false, ParameterSetName = "Default")] [string] [ValidateNotNullOrEmpty()] [Alias("spn")] $AzureADAppName, [Parameter(Mandatory = $false, ParameterSetName = "CentralScanMode")] [CAReportsLocation] [Alias("lo")] $LoggingOption, [Parameter(Mandatory = $false, ParameterSetName = "CentralScanMode")] [Parameter(Mandatory = $false, ParameterSetName = "Default")] [int] [Alias("si")] $ScanIntervalInHours, [Parameter(Mandatory = $false, ParameterSetName = "CentralScanMode")] [switch] [Alias("stsc")] $SkipTargetSubscriptionConfig, [Parameter(Mandatory = $true, ParameterSetName = "CentralScanMode", HelpMessage="This enables AzSK CA in central scanning mode. Use this switch along with TargetSubscriptionIds param to register target subscriptions in the central CA.")] [switch] [Alias("csm")] $CentralScanMode, [switch] [Parameter(Mandatory = $false, HelpMessage = "Switch to specify whether to open output folder or not.")] [Alias("dnof")] $DoNotOpenOutputFolder, [switch] [Parameter(Mandatory = $false, ParameterSetName = "Default", HelpMessage = "Trigger scan on resource addition.")] [Alias("sod")] $ScanOnDeployment ) Begin { [CommandHelper]::BeginCommand($PSCmdlet.MyInvocation); [AzListenerHelper]::RegisterListeners(); } Process { try { $isDefaultRGNameUsed = ![string]::IsNullOrWhiteSpace($AutomationAccountRGName) -and $AutomationAccountRGName -eq [UserSubscriptionDataHelper]::GetUserSubscriptionRGName() $isDefaultCANameUsed = ![string]::IsNullOrWhiteSpace($AutomationAccountName) -and $AutomationAccountName -eq [UserSubscriptionDataHelper]::GetCAName() $errMsg = "" if($isDefaultRGNameUsed) { $errMsg = "The specified 'AutomationAccountRGName' parameter value is reserved for toolkit use." } if($isDefaultCANameUsed) { $errMsg += "`r`nThe specified 'AutomationAccountName' parameter value is reserved for toolkit use." } if(![string]::IsNullOrWhiteSpace($errMsg)) { $errMsg += "`r`nPlease use different (unique) names for CA account and/or resource group." throw ([SuppressedException]::new(($errMsg), [SuppressedExceptionType]::InvalidOperation)) } $ccAccount = [CCAutomation]::new($SubscriptionId, $PSCmdlet.MyInvocation,` $AutomationAccountLocation, $AutomationAccountRGName, $AutomationAccountName, $ResourceGroupNames,` $AzureADAppName, $ScanIntervalInHours); #set the Log Analytics workspace settings $ccAccount.SetLAWSSettings($LAWSId, $LAWSSharedKey, $AltLAWSId, $AltLAWSSharedKey); #set the Webhook settings $ccAccount.SetWebhookSettings($WebhookUrl, $WebhookAuthZHeaderName, $WebhookAuthZHeaderValue); if ($ccAccount) { $ccAccount.ScanOnDeployment = $ScanOnDeployment; if($PSCmdlet.ParameterSetName -eq "CentralScanMode") { $ccAccount.IsCentralScanModeOn = $true; $ccAccount.TargetSubscriptionIds = $TargetSubscriptionIds; $ccAccount.SkipTargetSubscriptionConfig = $SkipTargetSubscriptionConfig; if($null -eq $LoggingOption) { $ccAccount.LoggingOption = [CAReportsLocation]::CentralSub; } else { $ccAccount.LoggingOption = $LoggingOption; } } return $ccAccount.InvokeFunction($ccAccount.InstallAzSKContinuousAssurance); } } catch { [EventBase]::PublishGenericException($_); } } End { [AzListenerHelper]::UnregisterListeners(); } } function Update-AzSKContinuousAssurance { <# .SYNOPSIS This command would help in updating user configurable properties of Continuous Assurance Automation Account in your subscription .DESCRIPTION This command is helpful if you want to update any of the following properties. 1. App Resource Groups 2. Log Analytics Workspace ID 3. Log Analytics Shared Key 4. Connection in Run as Account 5. Update/Renew Certificate in Run as Account .PARAMETER SubscriptionId Subscription id in which Automation Account exists .PARAMETER ResourceGroupNames Comma separated Application resource group names on which security scan should be performed by Automation Account .PARAMETER AutomationAccountRGName Name of ResourceGroup where AutomationAccount will be installed. .PARAMETER AutomationAccountName Name of AutomationAccount. Default value is AzSKContinuousAssurance. .PARAMETER LAWSId Workspace ID of Log Analytics workspace where security scan results will be populated .PARAMETER LAWSSharedKey Shared key of Log Analytics workspace which is used to monitor security scan results .PARAMETER AzureADAppName Name for the Azure Active Directory (AD) Application that will be created to update automation account Connection in Run As Account for running the runbook .PARAMETER UpdateCertificate Switch to update certificate credential for AzureADApp SPN and upload the certificate to automation account. .PARAMETER TargetSubscriptionIds Comma separated values of targetsubscriptionIds that will get monitored from the central subscription through CA. Use this switch along with CentralScanMode switch. .PARAMETER AltLAWSId Workspace ID of alternate Log Analytics workspace to monitor security scan results .PARAMETER AltLAWSSharedKey Shared key of alternate Log Analytics workspace which is used to monitor security scan results .PARAMETER WebhookUrl All the scan results shall be posted to this configured webhook .PARAMETER WebhookAuthZHeaderName Name of the AuthZ header (typically 'Authorization') .PARAMETER WebhookAuthZHeaderValue Value of the AuthZ header .PARAMETER ScanIntervalInHours Overrides the default scan interval (24hrs) with the custom provided value .PARAMETER SkipTargetSubscriptionConfig It would skip all the required central scanning configuration on the targets subs. It is owners responsibility to get the target subs configured correctly .PARAMETER LoggingOption This provides the capability to users to store the CA scan logs on central subscription or on individual subscriptions .PARAMETER CentralScanMode This switch is required to update AzSK CA running in central scanning mode. .PARAMETER FixRuntimeAccount Use this switch to fix CA runtime account in case of below issues. 1. Runtime account deleted (Permissions required: Subscription owner) 2. Runtime account permissions missing (Permissions required: Subscription owner and AD App owner) 3. Certificate deleted/expired (Permissions required: Subscription owner and AD App owner) .PARAMETER NewRuntimeAccount Use this switch to create new CA runtime account. .PARAMETER RenewCertificate Renews certificate credential of CA SPN if the caller is Owner of the AAD Application (SPN). If the caller is not Owner, a new application is created with a corresponding SPN and a certificate owned by the caller. CA uses the updated credential going forward. .PARAMETER FixModules Use this switch in case 'Az.Automation' module extraction fails in CA Automation Account. .PARAMETER DoNotOpenOutputFolder Switch to specify whether to open output folder. .NOTES .LINK https://aka.ms/azskossdocs #> Param( [Parameter(Position = 0, Mandatory = $true, ParameterSetName = "Default", HelpMessage="Subscription id in which Automation Account exists")] [Parameter(Position = 0, Mandatory = $true, ParameterSetName = "CentralScanMode", HelpMessage="Subscription id in which Automation Account exists")] [Parameter(Position = 0, Mandatory = $true, ParameterSetName = "RemoveSettings", HelpMessage="Subscription id in which Automation Account exists")] [string] [Alias("sid", "HostSubscriptionId", "hsid")] $SubscriptionId, [Parameter(Mandatory = $true, ParameterSetName = "CentralScanMode", HelpMessage="Comma separated values of targetsubscriptionIds that will get monitored from the central subscription through CA. Use this switch along with CentralScanMode switch.")] [string] [Alias("tsids")] $TargetSubscriptionIds, [Parameter(Mandatory = $false, ParameterSetName = "Default")] [Parameter(Mandatory = $false, ParameterSetName = "CentralScanMode")] [ValidateNotNullOrEmpty()] [string] [Alias("rgns")] $ResourceGroupNames, [Parameter(Mandatory = $false, ParameterSetName = "CentralScanMode")] [Parameter(Mandatory = $false, ParameterSetName = "Default")] [string] [Alias("aargn")] $AutomationAccountRGName, [Parameter(Mandatory = $false, ParameterSetName = "CentralScanMode")] [Parameter(Mandatory = $false, ParameterSetName = "Default")] [string] [Alias("aan")] $AutomationAccountName, [Parameter(Mandatory = $false, ParameterSetName = "Default")] [Parameter(Mandatory = $false, ParameterSetName = "CentralScanMode")] [ValidateNotNullOrEmpty()] [string] [Alias("lwid","wid","OMSWorkspaceId")] $LAWSId, [Parameter(Mandatory = $false, ParameterSetName = "Default")] [Parameter(Mandatory = $false, ParameterSetName = "CentralScanMode")] [ValidateNotNullOrEmpty()] [string] [Alias("lwkey","wkey","OMSSharedKey")] $LAWSSharedKey, [Parameter(Mandatory = $false, ParameterSetName = "Default")] [Parameter(Mandatory = $false, ParameterSetName = "CentralScanMode")] [ValidateNotNullOrEmpty()] [string] [Alias("alwid","awid","AltOMSWorkspaceId")] $AltLAWSId, [Parameter(Mandatory = $false, ParameterSetName = "Default")] [Parameter(Mandatory = $false, ParameterSetName = "CentralScanMode")] [ValidateNotNullOrEmpty()] [string] [Alias("alkey","awkey","AltOMSSharedKey")] $AltLAWSSharedKey, [Parameter(Mandatory = $false, ParameterSetName = "Default")] [Parameter(Mandatory = $false, ParameterSetName = "CentralScanMode")] [ValidateNotNullOrEmpty()] [string] [Alias("wurl")] $WebhookUrl, [Parameter(Mandatory = $false, ParameterSetName = "Default")] [Parameter(Mandatory = $false, ParameterSetName = "CentralScanMode")] [ValidateNotNullOrEmpty()] [string] [Alias("whn")] $WebhookAuthZHeaderName, [Parameter(Mandatory = $false, ParameterSetName = "Default")] [Parameter(Mandatory = $false, ParameterSetName = "CentralScanMode")] [ValidateNotNullOrEmpty()] [string] [Alias("whv")] $WebhookAuthZHeaderValue, [Parameter(Mandatory = $false, ParameterSetName = "Default")] [Parameter(Mandatory = $false, ParameterSetName = "CentralScanMode")] [ValidateNotNullOrEmpty()] [Alias("spn")] $AzureADAppName, [Parameter(Mandatory = $false, ParameterSetName = "Default")] [Parameter(Mandatory = $false, ParameterSetName = "CentralScanMode")] [switch] [Alias("fra","ConfigureRuntimeAccount", "cra")] $FixRuntimeAccount, [Parameter(Mandatory = $false, ParameterSetName = "Default")] [Parameter(Mandatory = $false, ParameterSetName = "CentralScanMode")] [switch] [Alias("nra")] $NewRuntimeAccount, [Parameter(Mandatory = $false, ParameterSetName = "Default")] [Parameter(Mandatory = $false, ParameterSetName = "CentralScanMode")] [switch] [Alias("rc")] $RenewCertificate, [Parameter(Mandatory = $false, ParameterSetName = "Default")] [Parameter(Mandatory = $false, ParameterSetName = "CentralScanMode")] [switch] [Alias("fm")] $FixModules, [Parameter(Mandatory = $false, ParameterSetName = "CentralScanMode")] [CAReportsLocation] [Alias("lo")] $LoggingOption, [Parameter(Mandatory = $false, ParameterSetName = "CentralScanMode")] [Parameter(Mandatory = $false, ParameterSetName = "Default")] [int] [Alias("si")] $ScanIntervalInHours, [Parameter(Mandatory = $false, ParameterSetName = "CentralScanMode")] [switch] [Alias("stsc")] $SkipTargetSubscriptionConfig, [Parameter(Mandatory = $true, ParameterSetName = "CentralScanMode", HelpMessage="This switch is required to update AzSK CA running in central scanning mode.")] [switch] [Alias("csm")] $CentralScanMode, [switch] [Parameter(Mandatory = $false, HelpMessage = "Switch to specify whether to open output folder or not.")] [Alias("dnof")] $DoNotOpenOutputFolder, [Parameter(Mandatory = $true, ParameterSetName = "RemoveSettings", HelpMessage="This switch is used to clear setting for Log Analytics workspace,Alt Log Analytics workspace or Webhook.")] [ValidateSet("LAWSSettings","AltLAWSSettings","WebhookSettings","ScanOnDeployment")] [Alias("rmv")] $Remove, [switch] [Parameter(Mandatory = $false, ParameterSetName = "Default", HelpMessage = "Trigger scan on resource addition.")] [Alias("sod")] $ScanOnDeployment ) Begin { [CommandHelper]::BeginCommand($PSCmdlet.MyInvocation); [AzListenerHelper]::RegisterListeners(); } Process { try { $ccAccount = [CCAutomation]::new($SubscriptionId, $PSCmdlet.MyInvocation, $null, $AutomationAccountRGName, $AutomationAccountName, ` $ResourceGroupNames, $AzureADAppName, $ScanIntervalInHours); if($PSCmdlet.ParameterSetName -eq "RemoveSettings") { switch($Remove) { "LAWSSettings" { return $ccAccount.InvokeFunction($ccAccount.RemoveLAWSSettings); } "AltLAWSSettings" { return $ccAccount.InvokeFunction($ccAccount.RemoveAltLAWSSettings); } "WebhookSettings" { return $ccAccount.InvokeFunction($ccAccount.RemoveWebhookSettings); } "ScanOnDeployment" { return $ccAccount.InvokeFunction($ccAccount.ClearResourceofDeploymentScan); } } } else { #set the Log Analytics workspace settings $ccAccount.SetLAWSSettings($LAWSId, $LAWSSharedKey, $AltLAWSId, $AltLAWSSharedKey); #set the Webhook settings $ccAccount.SetWebhookSettings($WebhookUrl, $WebhookAuthZHeaderName, $WebhookAuthZHeaderValue); if ($ccAccount) { $ccAccount.ScanOnDeployment = $ScanOnDeployment; if($PSCmdlet.ParameterSetName -eq "CentralScanMode") { $ccAccount.IsCentralScanModeOn = $true; $ccAccount.TargetSubscriptionIds = $TargetSubscriptionIds; $ccAccount.SkipTargetSubscriptionConfig = $SkipTargetSubscriptionConfig; if($null -eq $LoggingOption) { $ccAccount.LoggingOption = [CAReportsLocation]::CentralSub; } else { $ccAccount.LoggingOption = $LoggingOption; } } return $ccAccount.InvokeFunction($ccAccount.UpdateAzSKContinuousAssurance,@($FixRuntimeAccount,$NewRuntimeAccount,$RenewCertificate,$FixModules)); } } } catch { [EventBase]::PublishGenericException($_); } } End { [AzListenerHelper]::UnregisterListeners(); } } function Get-AzSKContinuousAssurance { <# .SYNOPSIS This command would help in getting details of Continuous Assurance Automation Account in your subscription .DESCRIPTION .PARAMETER SubscriptionId Subscription id in which Automation Account exists .PARAMETER AutomationAccountRGName Name of ResourceGroup where AutomationAccount will be installed. .PARAMETER AutomationAccountName Name of AutomationAccount. Default value is AzSKContinuousAssurance. .PARAMETER ExhaustiveCheck By appending this switch it would check whether all the modules installed in central automation account are up to date. Only include if default diagnosis is not resulting in any issue. .PARAMETER DoNotOpenOutputFolder Switch to specify whether to open output folder. .LINK https://aka.ms/azskossdocs #> Param( [Parameter(Position = 0, Mandatory = $true, HelpMessage="Subscription id for which the security evaluation has to be performed.")] [string] [Alias("sid","s","HostSubscriptionId", "hsid")] $SubscriptionId, [Parameter(Mandatory = $false)] [string] [Alias("aargn")] $AutomationAccountRGName, [Parameter(Mandatory = $false)] [string] [Alias("aan")] $AutomationAccountName, [Parameter(Mandatory = $false)] [switch] [Alias("ec")] $ExhaustiveCheck, [switch] [Parameter(Mandatory = $false, HelpMessage = "Switch to specify whether to open output folder or not.")] [Alias("dnof")] $DoNotOpenOutputFolder ) Begin { [CommandHelper]::BeginCommand($PSCmdlet.MyInvocation); [AzListenerHelper]::RegisterListeners(); } Process { try { $ccAccount = [CCAutomation]::new($SubscriptionId, $AutomationAccountRGName, $AutomationAccountName, $PSCmdlet.MyInvocation); if ($ccAccount) { $ccAccount.ExhaustiveCheck = $ExhaustiveCheck; return $ccAccount.InvokeFunction($ccAccount.GetAzSKContinuousAssurance); } } catch { [EventBase]::PublishGenericException($_); } } End { [AzListenerHelper]::UnregisterListeners(); } } function Remove-AzSKContinuousAssurance { <# .SYNOPSIS This command would help in removing resources created by Continuous Assurance installation in your subscription .DESCRIPTION .PARAMETER SubscriptionId Subscription id in which Automation Account exists .PARAMETER AutomationAccountRGName Name of ResourceGroup where AutomationAccount will be installed. .PARAMETER AutomationAccountName Name of AutomationAccount. Default value is AzSKContinuousAssurance. .PARAMETER DeleteStorageReports Switch to specify whether security scan logs/reports stored in storage account also should be removed permanently. .PARAMETER TargetSubscriptionIds Comma separated values of subscriptionIds which would de-registered from the central scanning mode. Use this switch along with CentralScanMode switch. .PARAMETER Force Switch to force this cmdlet to remove CA resources .PARAMETER CentralScanMode This switch is required if AzSK CA is running in central scanning mode. .PARAMETER DoNotOpenOutputFolder Switch to specify whether to open output folder. .LINK https://aka.ms/azskossdocs #> Param( [Parameter(Position = 0, Mandatory = $true, ParameterSetName = "Default", HelpMessage="Subscription id in which Automation Account exists")] [Parameter(Position = 0, Mandatory = $true, ParameterSetName = "CentralScanMode", HelpMessage="Subscription id in which Automation Account exists")] [string] [Alias("sid", "HostSubscriptionId", "hsid")] $SubscriptionId, [Parameter(Mandatory = $false, ParameterSetName = "CentralScanMode")] [Parameter(Mandatory = $false, ParameterSetName = "Default")] [string] [Alias("aargn")] $AutomationAccountRGName, [Parameter(Mandatory = $false, ParameterSetName = "CentralScanMode")] [Parameter(Mandatory = $false, ParameterSetName = "Default")] [string] [Alias("aan")] $AutomationAccountName, [Parameter(Mandatory = $false, ParameterSetName = "CentralScanMode")] [string] [Alias("tsids")] $TargetSubscriptionIds, [Parameter(Mandatory = $false, ParameterSetName = "Default")] [Parameter(Mandatory = $false, ParameterSetName = "CentralScanMode")] [switch] [Alias("dsr")] $DeleteStorageReports, [Parameter(Mandatory = $true, ParameterSetName = "CentralScanMode", HelpMessage="This switch is required if AzSK CA is running in central scanning mode.")] [switch] [Alias("csm")] $CentralScanMode, [Parameter(Mandatory = $false, ParameterSetName = "Default")] [Parameter(Mandatory = $false, ParameterSetName = "CentralScanMode")] [switch] [Alias("f")] $Force, [switch] [Parameter(Mandatory = $false, HelpMessage = "Switch to specify whether to open output folder or not.")] [Alias("dnof")] $DoNotOpenOutputFolder ) Begin { [CommandHelper]::BeginCommand($PSCmdlet.MyInvocation); [AzListenerHelper]::RegisterListeners(); } Process { try { $ccAccount = [CCAutomation]::new($SubscriptionId, $AutomationAccountRGName, $AutomationAccountName, $PSCmdlet.MyInvocation); if ($ccAccount) { if($PSCmdlet.ParameterSetName -eq "CentralScanMode") { $ccAccount.IsCentralScanModeOn = $true; $ccAccount.TargetSubscriptionIds = $TargetSubscriptionIds; } return $ccAccount.InvokeFunction($ccAccount.RemoveAzSKContinuousAssurance,@($DeleteStorageReports, $Force)); } } catch { [EventBase]::PublishGenericException($_); } } End { [AzListenerHelper]::UnregisterListeners(); } } function Set-AzSKAlertMonitoring { <# .SYNOPSIS This command would help in enabling real time alerts monitoring in your subscription .DESCRIPTION .PARAMETER SubscriptionId Subscription id in which Automation Account exists .PARAMETER AutomationAccountRGName Name of ResourceGroup where AutomationAccount will be installed. .PARAMETER AutomationAccountName Name of AutomationAccount. Default value is AzSKContinuousAssurance. .PARAMETER Force Switch to force this cmdlet to publish alert runbook .LINK https://aka.ms/azskossdocs #> Param( [string] [Parameter(HelpMessage="Subscription id in which Automation Account exists")] [Alias("sid","HostSubscriptionId","hsid","s")] $SubscriptionId, [Parameter(Mandatory = $false)] [string] [Alias("aargn")] $AutomationAccountRGName, [Parameter(Mandatory = $false)] [string] [Alias("aan")] $AutomationAccountName, [switch] [Alias("f")] $Force ) Begin { [CommandHelper]::BeginCommand($PSCmdlet.MyInvocation); [AzListenerHelper]::RegisterListeners(); } Process { try { $ccAccount = [CCAutomation]::new($SubscriptionId, $AutomationAccountRGName, $AutomationAccountName, $PSCmdlet.MyInvocation); if ($ccAccount) { return $ccAccount.InvokeFunction($ccAccount.SetAzSKAlertMonitoringRunbook,@($Force)); } } catch { [EventBase]::PublishGenericException($_); } } End { [AzListenerHelper]::UnregisterListeners(); } } function Remove-AzSKAlertMonitoring { <# .SYNOPSIS This command would help in disabling real time alerts monitoring in your subscription .DESCRIPTION .PARAMETER SubscriptionId Subscription id in which Automation Account exists .PARAMETER AutomationAccountRGName Name of ResourceGroup where AutomationAccount will be installed. .PARAMETER AutomationAccountName Name of AutomationAccount. Default value is AzSKContinuousAssurance. .PARAMETER Force Switch to force this cmdlet to remove alert runbook .LINK https://aka.ms/azskossdocs #> Param( [string] [Parameter(HelpMessage="Subscription id in which Automation Account exists")] [Alias("sid","HostSubscriptionId","hsid","s")] $SubscriptionId, [Parameter(Mandatory = $false)] [string] [Alias("aargn")] $AutomationAccountRGName, [Parameter(Mandatory = $false)] [string] [Alias("aan")] $AutomationAccountName, [switch] [Alias("f")] $Force ) Begin { [CommandHelper]::BeginCommand($PSCmdlet.MyInvocation); [AzListenerHelper]::RegisterListeners(); } Process { try { $ccAccount = [CCAutomation]::new($SubscriptionId, $AutomationAccountRGName, $AutomationAccountName, $PSCmdlet.MyInvocation); if ($ccAccount) { return $ccAccount.InvokeFunction($ccAccount.RemoveAzSKAlertMonitoringWebhook,@($Force)); } } catch { [EventBase]::PublishGenericException($_); } } End { [AzListenerHelper]::UnregisterListeners(); } } |