ContinuousAssurance/ContinuousAssurance.ps1
|
Set-StrictMode -Version Latest function Install-AzSKContinuousAssurance { <# .SYNOPSIS This command would help in installing Automation Account in your subscription to setup Continuous Assurance feature of AzSK .DESCRIPTION This command will install an Automation Account (Name: AzSKContinuousAssurance) which runs security scan on subscription and resource groups which are specified during installation. Security scan results will be populated in OMS which is configured during installation. Also, detailed logs will be stored in storage account (Name: azskyyyyMMddHHmmss format). .PARAMETER SubscriptionId Subscription id in which Automation Account needs to be installed. .PARAMETER AutomationAccountLocation Location of resource group which contains Automation Account. This is optional. Default location is EastUS2. .PARAMETER AutomationAccountRGName Name of ResourceGroup where AutomationAccount will be installed. .PARAMETER AutomationAccountName Name of AutomationAccount. Default value is AzSKContinuousAssurance. .PARAMETER ResourceGroupNames Comma separated Application resource group names on which security scan should be performed by Automation Account. .PARAMETER OMSWorkspaceId Workspace ID of OMS where security scan results will be sent .PARAMETER OMSSharedKey Shared key of OMS which is used to monitor security scan results. .PARAMETER LoggingOption Gives the flexibility for the users to choose from central sub reports storage mode vs individual sub reports storage in CA Scaling scenario. .PARAMETER AzureADAppName Name for the Azure Active Directory (AD) Application that will be created in the subscription for running the runbook. .PARAMETER AltOMSWorkspaceId Alternate Workspace ID of OMS to monitor security scan results. .PARAMETER AltOMSSharedKey Shared key of Alternate OMS which is used to monitor security scan results. .PARAMETER WebhookUrl All the scan results shall be posted to this configured webhook. .PARAMETER WebhookAuthZHeaderName Name of the AuthZ header. (typically 'Authorization') .PARAMETER WebhookAuthZHeaderValue Value of the AuthZ header. .PARAMETER ScanIntervalInHours Overrides the default scan interval (24hrs) with the custom provided value. .PARAMETER LoggingOption This provides the capability to users to store the CA scan logs on central subscription or on individual subscriptions. .PARAMETER SkipTargetSubscriptionConfig It would skip all the required central scanning configuration on the targets subs. It is owners responsibility to get the target subs configured correctly. .PARAMETER TargetSubscriptionIds Comma separated values of target subscriptionIds that will be monitored through CA from a central subscription. .PARAMETER CentralScanMode This enables AzSK CA in central scanning mode. Use this switch along with TargetSubscriptionIds param to register target subscriptions in the central CA. .NOTES .LINK https://aka.ms/azskossdocs #> Param( [Parameter(Position = 0, Mandatory = $true, ParameterSetName = "Default", HelpMessage="Id of the subscription in which Automation Account needs to be installed.")] [Parameter(Position = 0, Mandatory = $true, ParameterSetName = "CentralScanMode", HelpMessage="Id of the subscription in which Automation Account needs to be installed.")] [string] [Alias("sid")] $SubscriptionId , [Parameter(Mandatory = $true, ParameterSetName = "CentralScanMode", HelpMessage="Comma separated values of target subscriptionIds that will be monitored through CA from a central subscription.")] [string] [Alias("tsids")] $TargetSubscriptionIds, [Parameter(Mandatory = $false, ParameterSetName = "CentralScanMode")] [Parameter(Mandatory = $false, ParameterSetName = "Default")] [string] [Alias("loc")] $AutomationAccountLocation="EastUS2", [Parameter(Mandatory = $false, ParameterSetName = "CentralScanMode")] [Parameter(Mandatory = $false, ParameterSetName = "Default")] [string] [Alias("aargn")] $AutomationAccountRGName, [Parameter(Mandatory = $false, ParameterSetName = "CentralScanMode")] [Parameter(Mandatory = $false, ParameterSetName = "Default")] [string] [Alias("aan")] $AutomationAccountName, [Parameter(Position = 1, Mandatory = $true, ParameterSetName = "CentralScanMode")] [Parameter(Position = 1, Mandatory = $true, ParameterSetName = "Default")] [string] [ValidateNotNullOrEmpty()] [Alias("rgns")] $ResourceGroupNames , [Parameter(Position = 2, Mandatory = $true, ParameterSetName = "CentralScanMode", HelpMessage="Workspace ID of OMS where security scan results will be populated.")] [Parameter(Position = 2, Mandatory = $true, ParameterSetName = "Default", HelpMessage="Workspace ID of OMS where security scan results will be populated.")] [string] [ValidateNotNullOrEmpty()] [Alias("owid")] $OMSWorkspaceId, [Parameter(Position = 3, Mandatory = $true, ParameterSetName = "CentralScanMode", HelpMessage="Shared key of OMS which is used to monitor security scan results.")] [Parameter(Position = 3, Mandatory = $true, ParameterSetName = "Default", HelpMessage="Shared key of OMS which is used to monitor security scan results.")] [string] [ValidateNotNullOrEmpty()] [Alias("okey")] $OMSSharedKey, [Parameter(Mandatory = $false, ParameterSetName = "Default")] [Parameter(Mandatory = $false, ParameterSetName = "CentralScanMode")] [ValidateNotNullOrEmpty()] [string] [Alias("aowid")] $AltOMSWorkspaceId, [Parameter(Mandatory = $false, ParameterSetName = "Default")] [Parameter(Mandatory = $false, ParameterSetName = "CentralScanMode")] [ValidateNotNullOrEmpty()] [string] [Alias("aokey")] $AltOMSSharedKey, [Parameter(Mandatory = $false, ParameterSetName = "Default")] [Parameter(Mandatory = $false, ParameterSetName = "CentralScanMode")] [ValidateNotNullOrEmpty()] [string] [Alias("wurl")] $WebhookUrl, [Parameter(Mandatory = $false, ParameterSetName = "Default")] [Parameter(Mandatory = $false, ParameterSetName = "CentralScanMode")] [ValidateNotNullOrEmpty()] [string] [Alias("whn")] $WebhookAuthZHeaderName, [Parameter(Mandatory = $false, ParameterSetName = "Default")] [Parameter(Mandatory = $false, ParameterSetName = "CentralScanMode")] [ValidateNotNullOrEmpty()] [string] [Alias("whv")] $WebhookAuthZHeaderValue, [Parameter(Mandatory = $false, ParameterSetName = "CentralScanMode")] [Parameter(Mandatory = $false, ParameterSetName = "Default")] [string] [ValidateNotNullOrEmpty()] [Alias("spn")] $AzureADAppName, [Parameter(Mandatory = $false, ParameterSetName = "CentralScanMode")] [CAReportsLocation] [Alias("lo")] $LoggingOption, [Parameter(Mandatory = $false, ParameterSetName = "CentralScanMode")] [Parameter(Mandatory = $false, ParameterSetName = "Default")] [int] [Alias("si")] $ScanIntervalInHours, [Parameter(Mandatory = $false, ParameterSetName = "CentralScanMode")] [switch] $SkipTargetSubscriptionConfig, [Parameter(Mandatory = $true, ParameterSetName = "CentralScanMode", HelpMessage="This enables AzSK CA in central scanning mode. Use this switch along with TargetSubscriptionIds param to register target subscriptions in the central CA.")] [switch] [Alias("csm")] $CentralScanMode ) Begin { [CommandHelper]::BeginCommand($PSCmdlet.MyInvocation); [ListenerHelper]::RegisterListeners(); } Process { try { $ccAccount = [CCAutomation]::new($SubscriptionId, $PSCmdlet.MyInvocation,` $AutomationAccountLocation, $AutomationAccountRGName, $AutomationAccountName, $ResourceGroupNames,` $AzureADAppName, $ScanIntervalInHours); #set the OMS settings $ccAccount.SetOMSSettings($OMSWorkspaceId, $OMSSharedKey, $AltOMSWorkspaceId, $AltOMSSharedKey); #set the Webhook settings $ccAccount.SetWebhookSettings($WebhookUrl, $WebhookAuthZHeaderName, $WebhookAuthZHeaderValue); if ($ccAccount) { if($PSCmdlet.ParameterSetName -eq "CentralScanMode") { $ccAccount.IsCentralScanModeOn = $true; $ccAccount.TargetSubscriptionIds = $TargetSubscriptionIds; $ccAccount.SkipTargetSubscriptionConfig = $SkipTargetSubscriptionConfig; if($null -eq $LoggingOption) { $ccAccount.LoggingOption = [CAReportsLocation]::CentralSub; } else { $ccAccount.LoggingOption = $LoggingOption; } } return $ccAccount.InvokeFunction($ccAccount.InstallAzSKContinuousAssurance); } } catch { [EventBase]::PublishGenericException($_); } } End { [ListenerHelper]::UnregisterListeners(); } } function Update-AzSKContinuousAssurance { <# .SYNOPSIS This command would help in updating user configurable properties of Continuous Assurance Automation Account in your subscription .DESCRIPTION This command is helpful if you want to update any of the following properties. 1. App Resource Groups 2. OMS Workspace ID 3. OMS Shared Key 4. Connection in Run as Account 5. Update/Renew Certificate in Run as Account .PARAMETER SubscriptionId Subscription id in which Automation Account exists .PARAMETER ResourceGroupNames Comma separated Application resource group names on which security scan should be performed by Automation Account .PARAMETER AutomationAccountRGName Name of ResourceGroup where AutomationAccount will be installed. .PARAMETER AutomationAccountName Name of AutomationAccount. Default value is AzSKContinuousAssurance. .PARAMETER OMSWorkspaceId Workspace ID of OMS where security scan results will be populated .PARAMETER OMSSharedKey Shared key of OMS which is used to monitor security scan results .PARAMETER AzureADAppName Name for the Azure Active Directory (AD) Application that will be created to update automation account Connection in Run As Account for running the runbook .PARAMETER UpdateCertificate Switch to update certificate credential for AzureADApp SPN and upload the certificate to automation account. .PARAMETER TargetSubscriptionIds Comma separated values of targetsubscriptionIds that will get monitored from the central subscription through CA. Use this switch along with CentralScanMode switch. .PARAMETER AltOMSWorkspaceId Alternate Workspace ID of OMS to monitor security scan results .PARAMETER AltOMSSharedKey Shared key of Alternate OMS which is used to monitor security scan results .PARAMETER WebhookUrl All the scan results shall be posted to this configured webhook .PARAMETER WebhookAuthZHeaderName Name of the AuthZ header (typically 'Authorization') .PARAMETER WebhookAuthZHeaderValue Value of the AuthZ header .PARAMETER ScanIntervalInHours Overrides the default scan interval (24hrs) with the custom provided value .PARAMETER SkipTargetSubscriptionConfig It would skip all the required central scanning configuration on the targets subs. It is owners responsibility to get the target subs configured correctly .PARAMETER LoggingOption This provides the capability to users to store the CA scan logs on central subscription or on individual subscriptions .PARAMETER CentralScanMode This switch is required to update AzSK CA running in central scanning mode. .PARAMETER FixRuntimeAccount �Use this switch to fix CA runtime account in case of below issues. 1. Runtime account deleted (Permissions required: Subscription owner) 2. Runtime account permissions missing (Permissions required: Subscription owner and AD App owner) 3. Certificate deleted/expired (Permissions required: Subscription owner and AD App owner) .PARAMETER RenewCertificate Renews certificate credential of CA SPN if the caller is Owner of the AAD Application (SPN). If the caller is not Owner, a new application is created with a corresponding SPN and a certificate owned by the caller. CA uses the updated credential going forward. .PARAMETER FixModules Use this switch in case 'AzureRm.Automation' module extraction fails in CA Automation Account. .NOTES .LINK https://aka.ms/azskossdocs #> Param( [Parameter(Position = 0, Mandatory = $true, ParameterSetName = "Default", HelpMessage="Subscription id in which Automation Account exists")] [Parameter(Position = 0, Mandatory = $true, ParameterSetName = "CentralScanMode", HelpMessage="Subscription id in which Automation Account exists")] [string] [Alias("sid")] $SubscriptionId, [Parameter(Mandatory = $true, ParameterSetName = "CentralScanMode", HelpMessage="Comma separated values of targetsubscriptionIds that will get monitored from the central subscription through CA. Use this switch along with CentralScanMode switch.")] [string] [Alias("tsids")] $TargetSubscriptionIds, [Parameter(Mandatory = $false, ParameterSetName = "Default")] [Parameter(Mandatory = $false, ParameterSetName = "CentralScanMode")] [ValidateNotNullOrEmpty()] [string] [Alias("rgns")] $ResourceGroupNames, [Parameter(Mandatory = $false, ParameterSetName = "CentralScanMode")] [Parameter(Mandatory = $false, ParameterSetName = "Default")] [string] [Alias("aargn")] $AutomationAccountRGName, [Parameter(Mandatory = $false, ParameterSetName = "CentralScanMode")] [Parameter(Mandatory = $false, ParameterSetName = "Default")] [string] [Alias("aan")] $AutomationAccountName, [Parameter(Mandatory = $false, ParameterSetName = "Default")] [Parameter(Mandatory = $false, ParameterSetName = "CentralScanMode")] [ValidateNotNullOrEmpty()] [string] [Alias("owid")] $OMSWorkspaceId, [Parameter(Mandatory = $false, ParameterSetName = "Default")] [Parameter(Mandatory = $false, ParameterSetName = "CentralScanMode")] [ValidateNotNullOrEmpty()] [string] [Alias("okey")] $OMSSharedKey, [Parameter(Mandatory = $false, ParameterSetName = "Default")] [Parameter(Mandatory = $false, ParameterSetName = "CentralScanMode")] [ValidateNotNullOrEmpty()] [string] [Alias("aowid")] $AltOMSWorkspaceId, [Parameter(Mandatory = $false, ParameterSetName = "Default")] [Parameter(Mandatory = $false, ParameterSetName = "CentralScanMode")] [ValidateNotNullOrEmpty()] [string] [Alias("aokey")] $AltOMSSharedKey, [Parameter(Mandatory = $false, ParameterSetName = "Default")] [Parameter(Mandatory = $false, ParameterSetName = "CentralScanMode")] [ValidateNotNullOrEmpty()] [string] [Alias("wurl")] $WebhookUrl, [Parameter(Mandatory = $false, ParameterSetName = "Default")] [Parameter(Mandatory = $false, ParameterSetName = "CentralScanMode")] [ValidateNotNullOrEmpty()] [string] [Alias("whn")] $WebhookAuthZHeaderName, [Parameter(Mandatory = $false, ParameterSetName = "Default")] [Parameter(Mandatory = $false, ParameterSetName = "CentralScanMode")] [ValidateNotNullOrEmpty()] [string] [Alias("whv")] $WebhookAuthZHeaderValue, [Parameter(Mandatory = $false, ParameterSetName = "Default")] [Parameter(Mandatory = $false, ParameterSetName = "CentralScanMode")] [ValidateNotNullOrEmpty()] [Alias("spn")] $AzureADAppName, [Parameter(Mandatory = $false, ParameterSetName = "Default")] [Parameter(Mandatory = $false, ParameterSetName = "CentralScanMode")] [switch] [Alias("fra")] $FixRuntimeAccount, [Parameter(Mandatory = $false, ParameterSetName = "Default")] [Parameter(Mandatory = $false, ParameterSetName = "CentralScanMode")] [switch] [Alias("rc")] $RenewCertificate, [Parameter(Mandatory = $false, ParameterSetName = "Default")] [Parameter(Mandatory = $false, ParameterSetName = "CentralScanMode")] [switch] [Alias("fm")] $FixModules, [Parameter(Mandatory = $false, ParameterSetName = "CentralScanMode")] [CAReportsLocation] [Alias("lo")] $LoggingOption, [Parameter(Mandatory = $false, ParameterSetName = "CentralScanMode")] [Parameter(Mandatory = $false, ParameterSetName = "Default")] [int] [Alias("si")] $ScanIntervalInHours, [Parameter(Mandatory = $false, ParameterSetName = "CentralScanMode")] [switch] $SkipTargetSubscriptionConfig, [Parameter(Mandatory = $true, ParameterSetName = "CentralScanMode", HelpMessage="This switch is required to update AzSK CA running in central scanning mode.")] [switch] [Alias("csm")] $CentralScanMode ) Begin { [CommandHelper]::BeginCommand($PSCmdlet.MyInvocation); [ListenerHelper]::RegisterListeners(); } Process { try { $ccAccount = [CCAutomation]::new($SubscriptionId, $PSCmdlet.MyInvocation, $null, $AutomationAccountRGName, $AutomationAccountName, ` $ResourceGroupNames, $AzureADAppName, $ScanIntervalInHours); #set the OMS settings $ccAccount.SetOMSSettings($OMSWorkspaceId, $OMSSharedKey, $AltOMSWorkspaceId, $AltOMSSharedKey); #set the Webhook settings $ccAccount.SetWebhookSettings($WebhookUrl, $WebhookAuthZHeaderName, $WebhookAuthZHeaderValue); if ($ccAccount) { if($PSCmdlet.ParameterSetName -eq "CentralScanMode") { $ccAccount.IsCentralScanModeOn = $true; $ccAccount.TargetSubscriptionIds = $TargetSubscriptionIds; $ccAccount.SkipTargetSubscriptionConfig = $SkipTargetSubscriptionConfig; if($null -eq $LoggingOption) { $ccAccount.LoggingOption = [CAReportsLocation]::CentralSub; } else { $ccAccount.LoggingOption = $LoggingOption; } } return $ccAccount.InvokeFunction($ccAccount.UpdateAzSKContinuousAssurance,@($FixRuntimeAccount,$RenewCertificate,$FixModules)); } } catch { [EventBase]::PublishGenericException($_); } } End { [ListenerHelper]::UnregisterListeners(); } } function Get-AzSKContinuousAssurance { <# .SYNOPSIS This command would help in getting details of Continuous Assurance Automation Account in your subscription .DESCRIPTION .PARAMETER SubscriptionId Subscription id in which Automation Account exists .PARAMETER AutomationAccountRGName Name of ResourceGroup where AutomationAccount will be installed. .PARAMETER AutomationAccountName Name of AutomationAccount. Default value is AzSKContinuousAssurance. .PARAMETER ExhaustiveCheck By appending this switch it would check whether all the modules installed in central automation account are up to date. Only include if default diagnosis is not resulting in any issue. .LINK https://aka.ms/azskossdocs #> Param( [Parameter(Position = 0, Mandatory = $true, HelpMessage="Subscription id for which the security evaluation has to be performed.")] [string] [Alias("sid")] $SubscriptionId, [Parameter(Mandatory = $false)] [string] [Alias("aargn")] $AutomationAccountRGName, [Parameter(Mandatory = $false)] [string] [Alias("aan")] $AutomationAccountName, [Parameter(Mandatory = $false)] [switch] [Alias("ec")] $ExhaustiveCheck ) Begin { [CommandHelper]::BeginCommand($PSCmdlet.MyInvocation); [ListenerHelper]::RegisterListeners(); } Process { try { $ccAccount = [CCAutomation]::new($SubscriptionId, $AutomationAccountRGName, $AutomationAccountName, $PSCmdlet.MyInvocation); if ($ccAccount) { $ccAccount.ExhaustiveCheck = $ExhaustiveCheck; return $ccAccount.InvokeFunction($ccAccount.GetAzSKContinuousAssurance); } } catch { [EventBase]::PublishGenericException($_); } } End { [ListenerHelper]::UnregisterListeners(); } } function Remove-AzSKContinuousAssurance { <# .SYNOPSIS This command would help in removing resources created by Continuous Assurance installation in your subscription .DESCRIPTION .PARAMETER SubscriptionId Subscription id in which Automation Account exists .PARAMETER AutomationAccountRGName Name of ResourceGroup where AutomationAccount will be installed. .PARAMETER AutomationAccountName Name of AutomationAccount. Default value is AzSKContinuousAssurance. .PARAMETER DeleteStorageReports Switch to specify whether security scan logs/reports stored in storage account also should be removed permanently. .PARAMETER TargetSubscriptionIds Comma separated values of subscriptionIds which would de-registered from the central scanning mode. Use this switch along with CentralScanMode switch. .PARAMETER Force Switch to force this cmdlet to remove CA resources .PARAMETER CentralScanMode This switch is required if AzSK CA is running in central scanning mode. .LINK https://aka.ms/azskossdocs #> Param( [Parameter(Position = 0, Mandatory = $true, ParameterSetName = "Default", HelpMessage="Subscription id in which Automation Account exists")] [Parameter(Position = 0, Mandatory = $true, ParameterSetName = "CentralScanMode", HelpMessage="Subscription id in which Automation Account exists")] [string] [Alias("sid")] $SubscriptionId, [Parameter(Mandatory = $false, ParameterSetName = "CentralScanMode")] [Parameter(Mandatory = $false, ParameterSetName = "Default")] [string] [Alias("aargn")] $AutomationAccountRGName, [Parameter(Mandatory = $false, ParameterSetName = "CentralScanMode")] [Parameter(Mandatory = $false, ParameterSetName = "Default")] [string] [Alias("aan")] $AutomationAccountName, [Parameter(Mandatory = $false, ParameterSetName = "CentralScanMode")] [string] [Alias("tsids")] $TargetSubscriptionIds, [Parameter(Mandatory = $false, ParameterSetName = "Default")] [Parameter(Mandatory = $false, ParameterSetName = "CentralScanMode")] [switch] [Alias("dsr")] $DeleteStorageReports, [Parameter(Mandatory = $true, ParameterSetName = "CentralScanMode", HelpMessage="This switch is required if AzSK CA is running in central scanning mode.")] [switch] [Alias("csm")] $CentralScanMode, [Parameter(Mandatory = $false, ParameterSetName = "Default")] [Parameter(Mandatory = $false, ParameterSetName = "CentralScanMode")] [switch] [Alias("f")] $Force ) Begin { [CommandHelper]::BeginCommand($PSCmdlet.MyInvocation); [ListenerHelper]::RegisterListeners(); } Process { try { $ccAccount = [CCAutomation]::new($SubscriptionId, $AutomationAccountRGName, $AutomationAccountName, $PSCmdlet.MyInvocation); if ($ccAccount) { if($PSCmdlet.ParameterSetName -eq "CentralScanMode") { $ccAccount.IsCentralScanModeOn = $true; $ccAccount.TargetSubscriptionIds = $TargetSubscriptionIds; } return $ccAccount.InvokeFunction($ccAccount.RemoveAzSKContinuousAssurance,@($DeleteStorageReports, $Force)); } } catch { [EventBase]::PublishGenericException($_); } } End { [ListenerHelper]::UnregisterListeners(); } } function Set-AzSKAlertMonitoring { <# .SYNOPSIS This command would help in enabling real time alerts monitoring in your subscription .DESCRIPTION .PARAMETER SubscriptionId Subscription id in which Automation Account exists .PARAMETER AutomationAccountRGName Name of ResourceGroup where AutomationAccount will be installed. .PARAMETER AutomationAccountName Name of AutomationAccount. Default value is AzSKContinuousAssurance. .PARAMETER Force Switch to force this cmdlet to publish alert runbook .LINK https://aka.ms/azskossdocs #> Param( [string] [Parameter(HelpMessage="Subscription id in which Automation Account exists")] $SubscriptionId, [Parameter(Mandatory = $false)] [string] [Alias("aargn")] $AutomationAccountRGName, [Parameter(Mandatory = $false)] [string] [Alias("aan")] $AutomationAccountName, [switch] $Force ) Begin { [CommandHelper]::BeginCommand($PSCmdlet.MyInvocation); [ListenerHelper]::RegisterListeners(); } Process { try { $ccAccount = [CCAutomation]::new($SubscriptionId, $AutomationAccountRGName, $AutomationAccountName, $PSCmdlet.MyInvocation); if ($ccAccount) { return $ccAccount.InvokeFunction($ccAccount.SetAzSKAlertMonitoringRunbook,@($Force)); } } catch { [EventBase]::PublishGenericException($_); } } End { [ListenerHelper]::UnregisterListeners(); } } function Remove-AzSKAlertMonitoring { <# .SYNOPSIS This command would help in disabling real time alerts monitoring in your subscription .DESCRIPTION .PARAMETER SubscriptionId Subscription id in which Automation Account exists .PARAMETER AutomationAccountRGName Name of ResourceGroup where AutomationAccount will be installed. .PARAMETER AutomationAccountName Name of AutomationAccount. Default value is AzSKContinuousAssurance. .PARAMETER Force Switch to force this cmdlet to remove alert runbook .LINK https://aka.ms/azskossdocs #> Param( [string] [Parameter(HelpMessage="Subscription id in which Automation Account exists")] $SubscriptionId, [Parameter(Mandatory = $false)] [string] [Alias("aargn")] $AutomationAccountRGName, [Parameter(Mandatory = $false)] [string] [Alias("aan")] $AutomationAccountName, [switch] $Force ) Begin { [CommandHelper]::BeginCommand($PSCmdlet.MyInvocation); [ListenerHelper]::RegisterListeners(); } Process { try { $ccAccount = [CCAutomation]::new($SubscriptionId, $AutomationAccountRGName, $AutomationAccountName, $PSCmdlet.MyInvocation); if ($ccAccount) { return $ccAccount.InvokeFunction($ccAccount.RemoveAzSKAlertMonitoringWebhook,@($Force)); } } catch { [EventBase]::PublishGenericException($_); } } End { [ListenerHelper]::UnregisterListeners(); } } |