DevCenter.AutoRest/internal/ProxyCmdletDefinitions.ps1


# ----------------------------------------------------------------------------------
# Copyright (c) Microsoft Corporation. All rights reserved.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
# http://www.apache.org/licenses/LICENSE-2.0
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# Code generated by Microsoft (R) AutoRest Code Generator.Changes may cause incorrect behavior and will be lost if the code
# is regenerated.
# ----------------------------------------------------------------------------------

<#
.Synopsis
Gets a devcenter encryption set.
.Description
Gets a devcenter encryption set.
.Example
{{ Add code here }}
.Example
{{ Add code here }}
 
.Inputs
Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.IDevCenterIdentity
.Outputs
Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.Api20240501Preview.IDevCenterEncryptionSet
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
INPUTOBJECT <IDevCenterIdentity>: Identity Parameter
  [AttachedNetworkConnectionName <String>]: The name of the attached NetworkConnection.
  [CatalogName <String>]: The name of the Catalog.
  [DevBoxDefinitionName <String>]: The name of the Dev Box definition.
  [DevCenterName <String>]: The name of the devcenter.
  [EncryptionSetName <String>]: The name of the devcenter encryption set.
  [EnvironmentDefinitionName <String>]: The name of the Environment Definition.
  [EnvironmentTypeName <String>]: The name of the environment type.
  [GalleryName <String>]: The name of the gallery.
  [Id <String>]: Resource identity path
  [ImageName <String>]: The name of the image.
  [Location <String>]: The Azure region
  [MemberName <String>]: The name of a devcenter plan member.
  [NetworkConnectionName <String>]: Name of the Network Connection that can be applied to a Pool.
  [OperationId <String>]: The ID of an ongoing async operation
  [PlanName <String>]: The name of the devcenter plan.
  [PoolName <String>]: Name of the pool.
  [ProjectName <String>]: The name of the project.
  [ResourceGroupName <String>]: The name of the resource group. The name is case insensitive.
  [ScheduleName <String>]: The name of the schedule that uniquely identifies it.
  [SubscriptionId <String>]: The ID of the target subscription.
  [TaskName <String>]: The name of the Task.
  [VersionName <String>]: The version of the image.
.Link
https://learn.microsoft.com/powershell/module/az.devcenter/get-azdevcenteradminencryptionset
#>

function Get-AzDevCenterAdminEncryptionSet {
[OutputType([Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.Api20240501Preview.IDevCenterEncryptionSet])]
[CmdletBinding(DefaultParameterSetName='List', PositionalBinding=$false)]
param(
    [Parameter(ParameterSetName='Get', Mandatory)]
    [Parameter(ParameterSetName='List', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [System.String]
    # The name of the devcenter.
    ${DevCenterName},

    [Parameter(ParameterSetName='Get', Mandatory)]
    [Alias('EncryptionSetName')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [System.String]
    # The name of the devcenter encryption set.
    ${Name},

    [Parameter(ParameterSetName='Get', Mandatory)]
    [Parameter(ParameterSetName='List', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [System.String]
    # The name of the resource group.
    # The name is case insensitive.
    ${ResourceGroupName},

    [Parameter(ParameterSetName='Get')]
    [Parameter(ParameterSetName='List')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.DefaultInfo(Script='(Get-AzContext).Subscription.Id')]
    [System.String[]]
    # The ID of the target subscription.
    ${SubscriptionId},

    [Parameter(ParameterSetName='GetViaIdentity', Mandatory, ValueFromPipeline)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.IDevCenterIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter()]
    [Alias('AzureRMContext', 'AzureCredential')]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Azure')]
    [System.Management.Automation.PSObject]
    # The DefaultProfile parameter is not functional.
    # Use the SubscriptionId parameter when available if executing the cmdlet against a different subscription.
    ${DefaultProfile},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        $mapping = @{
            Get = 'Az.DevCenter.private\Get-AzDevCenterAdminEncryptionSet_Get';
            GetViaIdentity = 'Az.DevCenter.private\Get-AzDevCenterAdminEncryptionSet_GetViaIdentity';
            List = 'Az.DevCenter.private\Get-AzDevCenterAdminEncryptionSet_List';
        }
        if (('Get', 'List') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('SubscriptionId')) {
            $testPlayback = $false
            $PSBoundParameters['HttpPipelinePrepend'] | Foreach-Object { if ($_) { $testPlayback = $testPlayback -or ('Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.PipelineMock' -eq $_.Target.GetType().FullName -and 'Playback' -eq $_.Target.Mode) } }
            if ($testPlayback) {
                $PSBoundParameters['SubscriptionId'] = . (Join-Path $PSScriptRoot '..' 'utils' 'Get-SubscriptionIdTestSafe.ps1')
            } else {
                $PSBoundParameters['SubscriptionId'] = (Get-AzContext).Subscription.Id
            }
        }

        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {

        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {

        throw
    }

}
end {
    try {
        $steppablePipeline.End()

    } catch {

        throw
    }
} 
}

<#
.Synopsis
Lists all of the available resource provider operations.
.Description
Lists all of the available resource provider operations.
.Example
{{ Add code here }}
.Example
{{ Add code here }}
 
.Outputs
Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.Api30.IOperation
.Link
https://learn.microsoft.com/powershell/module/az.devcenter/get-azdevcenteradminoperation
#>

function Get-AzDevCenterAdminOperation {
[OutputType([Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.Api30.IOperation])]
[CmdletBinding(DefaultParameterSetName='List', PositionalBinding=$false)]
param(
    [Parameter()]
    [Alias('AzureRMContext', 'AzureCredential')]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Azure')]
    [System.Management.Automation.PSObject]
    # The DefaultProfile parameter is not functional.
    # Use the SubscriptionId parameter when available if executing the cmdlet against a different subscription.
    ${DefaultProfile},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        $mapping = @{
            List = 'Az.DevCenter.private\Get-AzDevCenterAdminOperation_List';
        }

        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {

        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {

        throw
    }

}
end {
    try {
        $steppablePipeline.End()

    } catch {

        throw
    }
} 
}

<#
.Synopsis
Gets a schedule resource.
.Description
Gets a schedule resource.
.Example
Get-AzDevCenterAdminSchedule -PoolName DevPool -ProjectName DevProject -ResourceGroupName testRg
.Example
$schedule = @{"ResourceGroupName" = "testRg"; "ProjectName" = "DevProject"; "PoolName" = "DevPool"; "SubscriptionId" = "0ac520ee-14c0-480f-b6c9-0a90c58ffff"}
Get-AzDevCenterAdminSchedule -InputObject $schedule
 
.Inputs
Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.IDevCenterIdentity
.Outputs
Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.Api20240501Preview.ISchedule
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
INPUTOBJECT <IDevCenterIdentity>: Identity Parameter
  [AttachedNetworkConnectionName <String>]: The name of the attached NetworkConnection.
  [CatalogName <String>]: The name of the Catalog.
  [DevBoxDefinitionName <String>]: The name of the Dev Box definition.
  [DevCenterName <String>]: The name of the devcenter.
  [EncryptionSetName <String>]: The name of the devcenter encryption set.
  [EnvironmentDefinitionName <String>]: The name of the Environment Definition.
  [EnvironmentTypeName <String>]: The name of the environment type.
  [GalleryName <String>]: The name of the gallery.
  [Id <String>]: Resource identity path
  [ImageName <String>]: The name of the image.
  [Location <String>]: The Azure region
  [MemberName <String>]: The name of a devcenter plan member.
  [NetworkConnectionName <String>]: Name of the Network Connection that can be applied to a Pool.
  [OperationId <String>]: The ID of an ongoing async operation
  [PlanName <String>]: The name of the devcenter plan.
  [PoolName <String>]: Name of the pool.
  [ProjectName <String>]: The name of the project.
  [ResourceGroupName <String>]: The name of the resource group. The name is case insensitive.
  [ScheduleName <String>]: The name of the schedule that uniquely identifies it.
  [SubscriptionId <String>]: The ID of the target subscription.
  [TaskName <String>]: The name of the Task.
  [VersionName <String>]: The version of the image.
.Link
https://learn.microsoft.com/powershell/module/az.devcenter/get-azdevcenteradminschedule
#>

function Get-AzDevCenterAdminSchedule {
[OutputType([Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.Api20240501Preview.ISchedule])]
[CmdletBinding(DefaultParameterSetName='Get', PositionalBinding=$false)]
param(
    [Parameter(ParameterSetName='Get', Mandatory)]
    [Parameter(ParameterSetName='List', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [System.String]
    # Name of the pool.
    ${PoolName},

    [Parameter(ParameterSetName='Get', Mandatory)]
    [Parameter(ParameterSetName='List', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [System.String]
    # The name of the project.
    ${ProjectName},

    [Parameter(ParameterSetName='Get', Mandatory)]
    [Parameter(ParameterSetName='List', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [System.String]
    # The name of the resource group.
    # The name is case insensitive.
    ${ResourceGroupName},

    [Parameter(ParameterSetName='Get')]
    [Parameter(ParameterSetName='List')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.DefaultInfo(Script='(Get-AzContext).Subscription.Id')]
    [System.String[]]
    # The ID of the target subscription.
    ${SubscriptionId},

    [Parameter(ParameterSetName='GetViaIdentity', Mandatory, ValueFromPipeline)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.IDevCenterIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter()]
    [Alias('AzureRMContext', 'AzureCredential')]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Azure')]
    [System.Management.Automation.PSObject]
    # The DefaultProfile parameter is not functional.
    # Use the SubscriptionId parameter when available if executing the cmdlet against a different subscription.
    ${DefaultProfile},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        $mapping = @{
            Get = 'Az.DevCenter.private\Get-AzDevCenterAdminSchedule_Get';
            GetViaIdentity = 'Az.DevCenter.private\Get-AzDevCenterAdminSchedule_GetViaIdentity';
            List = 'Az.DevCenter.private\Get-AzDevCenterAdminSchedule_List';
        }
        if (('Get') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('Name')) {
            $PSBoundParameters['Name'] = "default"
        }
        if (('Get', 'List') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('SubscriptionId')) {
            $testPlayback = $false
            $PSBoundParameters['HttpPipelinePrepend'] | Foreach-Object { if ($_) { $testPlayback = $testPlayback -or ('Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.PipelineMock' -eq $_.Target.GetType().FullName -and 'Playback' -eq $_.Target.Mode) } }
            if ($testPlayback) {
                $PSBoundParameters['SubscriptionId'] = . (Join-Path $PSScriptRoot '..' 'utils' 'Get-SubscriptionIdTestSafe.ps1')
            } else {
                $PSBoundParameters['SubscriptionId'] = (Get-AzContext).Subscription.Id
            }
        }

        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {

        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {

        throw
    }

}
end {
    try {
        $steppablePipeline.End()

    } catch {

        throw
    }
} 
}

<#
.Synopsis
Creates or updates an attached NetworkConnection.
.Description
Creates or updates an attached NetworkConnection.
.Example
New-AzDevCenterAdminAttachedNetwork -ConnectionName network-uswest3 -DevCenterName Contoso -ResourceGroupName testRg -NetworkConnectionId /subscriptions/0ac520ee-14c0-480f-b6c9-0a90c58ffff/resourceGroups/testRg/providers/Microsoft.DevCenter/NetworkConnections/network-uswest3
.Example
$attachedNetwork = @{"ResourceGroupName" = "testRg"; "DevCenterName" = "Contoso"; "AttachedNetworkConnectionName" = "network-uswest3"; "SubscriptionId" = "0ac520ee-14c0-480f-b6c9-0a90c58ffff"}
New-AzDevCenterAdminAttachedNetwork -InputObject $attachedNetwork -NetworkConnectionId /subscriptions/0ac520ee-14c0-480f-b6c9-0a90c58ffff/resourceGroups/testRg/providers/Microsoft.DevCenter/NetworkConnections/network-uswest3
 
.Inputs
Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.IDevCenterIdentity
.Outputs
Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.Api20240501Preview.IAttachedNetworkConnection
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
INPUTOBJECT <IDevCenterIdentity>: Identity Parameter
  [AttachedNetworkConnectionName <String>]: The name of the attached NetworkConnection.
  [CatalogName <String>]: The name of the Catalog.
  [DevBoxDefinitionName <String>]: The name of the Dev Box definition.
  [DevCenterName <String>]: The name of the devcenter.
  [EncryptionSetName <String>]: The name of the devcenter encryption set.
  [EnvironmentDefinitionName <String>]: The name of the Environment Definition.
  [EnvironmentTypeName <String>]: The name of the environment type.
  [GalleryName <String>]: The name of the gallery.
  [Id <String>]: Resource identity path
  [ImageName <String>]: The name of the image.
  [Location <String>]: The Azure region
  [MemberName <String>]: The name of a devcenter plan member.
  [NetworkConnectionName <String>]: Name of the Network Connection that can be applied to a Pool.
  [OperationId <String>]: The ID of an ongoing async operation
  [PlanName <String>]: The name of the devcenter plan.
  [PoolName <String>]: Name of the pool.
  [ProjectName <String>]: The name of the project.
  [ResourceGroupName <String>]: The name of the resource group. The name is case insensitive.
  [ScheduleName <String>]: The name of the schedule that uniquely identifies it.
  [SubscriptionId <String>]: The ID of the target subscription.
  [TaskName <String>]: The name of the Task.
  [VersionName <String>]: The version of the image.
.Link
https://learn.microsoft.com/powershell/module/az.devcenter/new-azdevcenteradminattachednetwork
#>

function New-AzDevCenterAdminAttachedNetwork {
[OutputType([Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.Api20240501Preview.IAttachedNetworkConnection])]
[CmdletBinding(DefaultParameterSetName='CreateExpanded', PositionalBinding=$false, SupportsShouldProcess, ConfirmImpact='Medium')]
param(
    [Parameter(ParameterSetName='CreateExpanded', Mandatory)]
    [Alias('AttachedNetworkConnectionName')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [System.String]
    # The name of the attached NetworkConnection.
    ${ConnectionName},

    [Parameter(ParameterSetName='CreateExpanded', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [System.String]
    # The name of the devcenter.
    ${DevCenterName},

    [Parameter(ParameterSetName='CreateExpanded', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [System.String]
    # The name of the resource group.
    # The name is case insensitive.
    ${ResourceGroupName},

    [Parameter(ParameterSetName='CreateExpanded')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.DefaultInfo(Script='(Get-AzContext).Subscription.Id')]
    [System.String]
    # The ID of the target subscription.
    ${SubscriptionId},

    [Parameter(ParameterSetName='CreateViaIdentityExpanded', Mandatory, ValueFromPipeline)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.IDevCenterIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [System.String]
    # The resource ID of the NetworkConnection you want to attach.
    ${NetworkConnectionId},

    [Parameter()]
    [Alias('AzureRMContext', 'AzureCredential')]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Azure')]
    [System.Management.Automation.PSObject]
    # The DefaultProfile parameter is not functional.
    # Use the SubscriptionId parameter when available if executing the cmdlet against a different subscription.
    ${DefaultProfile},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Run the command as a job
    ${AsJob},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Run the command asynchronously
    ${NoWait},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        $mapping = @{
            CreateExpanded = 'Az.DevCenter.private\New-AzDevCenterAdminAttachedNetwork_CreateExpanded';
            CreateViaIdentityExpanded = 'Az.DevCenter.private\New-AzDevCenterAdminAttachedNetwork_CreateViaIdentityExpanded';
        }
        if (('CreateExpanded') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('SubscriptionId')) {
            $testPlayback = $false
            $PSBoundParameters['HttpPipelinePrepend'] | Foreach-Object { if ($_) { $testPlayback = $testPlayback -or ('Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.PipelineMock' -eq $_.Target.GetType().FullName -and 'Playback' -eq $_.Target.Mode) } }
            if ($testPlayback) {
                $PSBoundParameters['SubscriptionId'] = . (Join-Path $PSScriptRoot '..' 'utils' 'Get-SubscriptionIdTestSafe.ps1')
            } else {
                $PSBoundParameters['SubscriptionId'] = (Get-AzContext).Subscription.Id
            }
        }

        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {

        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {

        throw
    }

}
end {
    try {
        $steppablePipeline.End()

    } catch {

        throw
    }
} 
}

<#
.Synopsis
Creates or updates a catalog.
.Description
Creates or updates a catalog.
.Example
New-AzDevCenterAdminCatalog -DevCenterName Contoso -Name CentralCatalog -ResourceGroupName testRg -AdoGitBranch main -AdoGitPath "/templates" -AdoGitSecretIdentifier "https://contosokv.vault.azure.net/secrets/CentralRepoPat" -AdoGitUri "https://contoso@dev.azure.com/contoso/contosoOrg/_git/centralrepo-fakecontoso"
.Example
New-AzDevCenterAdminCatalog -DevCenterName Contoso -Name CentralCatalog -ResourceGroupName testRg -GitHubBranch main -GitHubPath "/templates" -GitHubSecretIdentifier "https://contosokv.vault.azure.net/secrets/CentralRepoPat" -GitHubUri "https://github.com/Contoso/centralrepo-fake.git"
.Example
$catalog = @{"ResourceGroupName" = "testRg"; "DevCenterName" = "Contoso"; "CatalogName" = "CentralCatalog"; "SubscriptionId" = "0ac520ee-14c0-480f-b6c9-0a90c58ffff"}
New-AzDevCenterAdminCatalog -InputObject $catalog -AdoGitBranch main -AdoGitPath "/templates" -AdoGitSecretIdentifier "https://contosokv.vault.azure.net/secrets/CentralRepoPat" -AdoGitUri "https://contoso@dev.azure.com/contoso/contosoOrg/_git/centralrepo-fakecontoso"
.Example
$catalog = @{"ResourceGroupName" = "testRg"; "DevCenterName" = "Contoso"; "CatalogName" = "CentralCatalog"; "SubscriptionId" = "0ac520ee-14c0-480f-b6c9-0a90c58ffff"}
New-AzDevCenterAdminCatalog -InputObject $catalog -GitHubBranch main -GitHubPath "/templates" -GitHubSecretIdentifier "https://contosokv.vault.azure.net/secrets/CentralRepoPat" -GitHubUri "https://github.com/Contoso/centralrepo-fake.git"
 
.Inputs
Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.IDevCenterIdentity
.Outputs
Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.Api20240501Preview.ICatalog
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
INPUTOBJECT <IDevCenterIdentity>: Identity Parameter
  [AttachedNetworkConnectionName <String>]: The name of the attached NetworkConnection.
  [CatalogName <String>]: The name of the Catalog.
  [DevBoxDefinitionName <String>]: The name of the Dev Box definition.
  [DevCenterName <String>]: The name of the devcenter.
  [EncryptionSetName <String>]: The name of the devcenter encryption set.
  [EnvironmentDefinitionName <String>]: The name of the Environment Definition.
  [EnvironmentTypeName <String>]: The name of the environment type.
  [GalleryName <String>]: The name of the gallery.
  [Id <String>]: Resource identity path
  [ImageName <String>]: The name of the image.
  [Location <String>]: The Azure region
  [MemberName <String>]: The name of a devcenter plan member.
  [NetworkConnectionName <String>]: Name of the Network Connection that can be applied to a Pool.
  [OperationId <String>]: The ID of an ongoing async operation
  [PlanName <String>]: The name of the devcenter plan.
  [PoolName <String>]: Name of the pool.
  [ProjectName <String>]: The name of the project.
  [ResourceGroupName <String>]: The name of the resource group. The name is case insensitive.
  [ScheduleName <String>]: The name of the schedule that uniquely identifies it.
  [SubscriptionId <String>]: The ID of the target subscription.
  [TaskName <String>]: The name of the Task.
  [VersionName <String>]: The version of the image.
.Link
https://learn.microsoft.com/powershell/module/az.devcenter/new-azdevcenteradmincatalog
#>

function New-AzDevCenterAdminCatalog {
[OutputType([Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.Api20240501Preview.ICatalog])]
[CmdletBinding(DefaultParameterSetName='CreateExpanded', PositionalBinding=$false, SupportsShouldProcess, ConfirmImpact='Medium')]
param(
    [Parameter(ParameterSetName='CreateExpanded', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [System.String]
    # The name of the devcenter.
    ${DevCenterName},

    [Parameter(ParameterSetName='CreateExpanded', Mandatory)]
    [Alias('CatalogName')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [System.String]
    # The name of the Catalog.
    ${Name},

    [Parameter(ParameterSetName='CreateExpanded', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [System.String]
    # The name of the resource group.
    # The name is case insensitive.
    ${ResourceGroupName},

    [Parameter(ParameterSetName='CreateExpanded')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.DefaultInfo(Script='(Get-AzContext).Subscription.Id')]
    [System.String]
    # The ID of the target subscription.
    ${SubscriptionId},

    [Parameter(ParameterSetName='CreateViaIdentityExpanded', Mandatory, ValueFromPipeline)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.IDevCenterIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [System.String]
    # Git branch.
    ${AdoGitBranch},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [System.String]
    # The folder where the catalog items can be found inside the repository.
    ${AdoGitPath},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [System.String]
    # A reference to the Key Vault secret containing a security token to authenticate to a Git repository.
    ${AdoGitSecretIdentifier},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [System.String]
    # Git URI.
    ${AdoGitUri},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [System.String]
    # Git branch.
    ${GitHubBranch},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [System.String]
    # The folder where the catalog items can be found inside the repository.
    ${GitHubPath},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [System.String]
    # A reference to the Key Vault secret containing a security token to authenticate to a Git repository.
    ${GitHubSecretIdentifier},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [System.String]
    # Git URI.
    ${GitHubUri},

    [Parameter()]
    [ArgumentCompleter([Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Support.CatalogSyncType])]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Support.CatalogSyncType]
    # Indicates the type of sync that is configured for the catalog.
    ${SyncType},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.Info(PossibleTypes=([Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.Api20240501Preview.ICatalogUpdatePropertiesTags]))]
    [System.Collections.Hashtable]
    # Resource tags.
    ${Tag},

    [Parameter()]
    [Alias('AzureRMContext', 'AzureCredential')]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Azure')]
    [System.Management.Automation.PSObject]
    # The DefaultProfile parameter is not functional.
    # Use the SubscriptionId parameter when available if executing the cmdlet against a different subscription.
    ${DefaultProfile},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Run the command as a job
    ${AsJob},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Run the command asynchronously
    ${NoWait},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        $mapping = @{
            CreateExpanded = 'Az.DevCenter.private\New-AzDevCenterAdminCatalog_CreateExpanded';
            CreateViaIdentityExpanded = 'Az.DevCenter.private\New-AzDevCenterAdminCatalog_CreateViaIdentityExpanded';
        }
        if (('CreateExpanded') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('SubscriptionId')) {
            $testPlayback = $false
            $PSBoundParameters['HttpPipelinePrepend'] | Foreach-Object { if ($_) { $testPlayback = $testPlayback -or ('Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.PipelineMock' -eq $_.Target.GetType().FullName -and 'Playback' -eq $_.Target.Mode) } }
            if ($testPlayback) {
                $PSBoundParameters['SubscriptionId'] = . (Join-Path $PSScriptRoot '..' 'utils' 'Get-SubscriptionIdTestSafe.ps1')
            } else {
                $PSBoundParameters['SubscriptionId'] = (Get-AzContext).Subscription.Id
            }
        }

        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {

        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {

        throw
    }

}
end {
    try {
        $steppablePipeline.End()

    } catch {

        throw
    }
} 
}

<#
.Synopsis
Creates or updates a Dev Box definition.
.Description
Creates or updates a Dev Box definition.
.Example
New-AzDevCenterAdminDevBoxDefinition -Name "WebDevBox" -DevCenterName Contoso -ResourceGroupName testRg -Location "westus3" -HibernateSupport "Enabled" -ImageReferenceId "/subscriptions/0ac520ee-14c0-480f-b6c9-0a90c58ffff/resourceGroups/testRg/providers/Microsoft.DevCenter/devcenters/Contoso/galleries/contosogallery/images/exampleImage/version/1.0.0" -OSStorageType "ssd_1024gb" -SkuName "general_a_8c32gb_v1"
.Example
$devBoxDefinition = @{"ResourceGroupName" = "testRg"; "DevCenterName" = "Contoso"; "DevBoxDefinitionName" = "WebDevBox"; "SubscriptionId" = "0ac520ee-14c0-480f-b6c9-0a90c58ffff"}
New-AzDevCenterAdminDevBoxDefinition -InputObject $devBoxDefinition -Location "westus3" -HibernateSupport "Enabled" -ImageReferenceId "/subscriptions/0ac520ee-14c0-480f-b6c9-0a90c58ffff/resourceGroups/testRg/providers/Microsoft.DevCenter/devcenters/Contoso/galleries/contosogallery/images/exampleImage/version/1.0.0" -OSStorageType "ssd_1024gb" -SkuName "general_a_8c32gb_v1"
 
.Inputs
Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.IDevCenterIdentity
.Outputs
Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.Api20240501Preview.IDevBoxDefinition
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
INPUTOBJECT <IDevCenterIdentity>: Identity Parameter
  [AttachedNetworkConnectionName <String>]: The name of the attached NetworkConnection.
  [CatalogName <String>]: The name of the Catalog.
  [DevBoxDefinitionName <String>]: The name of the Dev Box definition.
  [DevCenterName <String>]: The name of the devcenter.
  [EncryptionSetName <String>]: The name of the devcenter encryption set.
  [EnvironmentDefinitionName <String>]: The name of the Environment Definition.
  [EnvironmentTypeName <String>]: The name of the environment type.
  [GalleryName <String>]: The name of the gallery.
  [Id <String>]: Resource identity path
  [ImageName <String>]: The name of the image.
  [Location <String>]: The Azure region
  [MemberName <String>]: The name of a devcenter plan member.
  [NetworkConnectionName <String>]: Name of the Network Connection that can be applied to a Pool.
  [OperationId <String>]: The ID of an ongoing async operation
  [PlanName <String>]: The name of the devcenter plan.
  [PoolName <String>]: Name of the pool.
  [ProjectName <String>]: The name of the project.
  [ResourceGroupName <String>]: The name of the resource group. The name is case insensitive.
  [ScheduleName <String>]: The name of the schedule that uniquely identifies it.
  [SubscriptionId <String>]: The ID of the target subscription.
  [TaskName <String>]: The name of the Task.
  [VersionName <String>]: The version of the image.
.Link
https://learn.microsoft.com/powershell/module/az.devcenter/new-azdevcenteradmindevboxdefinition
#>

function New-AzDevCenterAdminDevBoxDefinition {
[OutputType([Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.Api20240501Preview.IDevBoxDefinition])]
[CmdletBinding(DefaultParameterSetName='CreateExpanded', PositionalBinding=$false, SupportsShouldProcess, ConfirmImpact='Medium')]
param(
    [Parameter(ParameterSetName='CreateExpanded', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [System.String]
    # The name of the devcenter.
    ${DevCenterName},

    [Parameter(ParameterSetName='CreateExpanded', Mandatory)]
    [Alias('DevBoxDefinitionName')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [System.String]
    # The name of the Dev Box definition.
    ${Name},

    [Parameter(ParameterSetName='CreateExpanded', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [System.String]
    # The name of the resource group.
    # The name is case insensitive.
    ${ResourceGroupName},

    [Parameter(ParameterSetName='CreateExpanded')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.DefaultInfo(Script='(Get-AzContext).Subscription.Id')]
    [System.String]
    # The ID of the target subscription.
    ${SubscriptionId},

    [Parameter(ParameterSetName='CreateViaIdentityExpanded', Mandatory, ValueFromPipeline)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.IDevCenterIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter(Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [System.String]
    # The geo-location where the resource lives
    ${Location},

    [Parameter()]
    [ArgumentCompleter([Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Support.HibernateSupport])]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Support.HibernateSupport]
    # Indicates whether Dev Boxes created with this definition are capable of hibernation.
    # Not all images are capable of supporting hibernation.
    # To find out more see https://aka.ms/devbox/hibernate
    ${HibernateSupport},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [System.String]
    # Image ID, or Image version ID.
    # When Image ID is provided, its latest version will be used.
    ${ImageReferenceId},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [System.String]
    # The storage type used for the Operating System disk of Dev Boxes created using this definition.
    ${OSStorageType},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [System.Int32]
    # If the SKU supports scale out/in then the capacity integer should be included.
    # If scale out/in is not possible for the resource this may be omitted.
    ${SkuCapacity},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [System.String]
    # If the service has different generations of hardware, for the same SKU, then that can be captured here.
    ${SkuFamily},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [System.String]
    # The name of the SKU.
    # E.g.
    # P3.
    # It is typically a letter+number code
    ${SkuName},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [System.String]
    # The SKU size.
    # When the name field is the combination of tier and some other value, this would be the standalone code.
    ${SkuSize},

    [Parameter()]
    [ArgumentCompleter([Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Support.SkuTier])]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Support.SkuTier]
    # This field is required to be implemented by the Resource Provider if the service has more than one tier, but is not required on a PUT.
    ${SkuTier},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.Info(PossibleTypes=([Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.Api40.ITrackedResourceTags]))]
    [System.Collections.Hashtable]
    # Resource tags.
    ${Tag},

    [Parameter()]
    [Alias('AzureRMContext', 'AzureCredential')]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Azure')]
    [System.Management.Automation.PSObject]
    # The DefaultProfile parameter is not functional.
    # Use the SubscriptionId parameter when available if executing the cmdlet against a different subscription.
    ${DefaultProfile},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Run the command as a job
    ${AsJob},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Run the command asynchronously
    ${NoWait},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        $mapping = @{
            CreateExpanded = 'Az.DevCenter.private\New-AzDevCenterAdminDevBoxDefinition_CreateExpanded';
            CreateViaIdentityExpanded = 'Az.DevCenter.private\New-AzDevCenterAdminDevBoxDefinition_CreateViaIdentityExpanded';
        }
        if (('CreateExpanded') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('SubscriptionId')) {
            $testPlayback = $false
            $PSBoundParameters['HttpPipelinePrepend'] | Foreach-Object { if ($_) { $testPlayback = $testPlayback -or ('Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.PipelineMock' -eq $_.Target.GetType().FullName -and 'Playback' -eq $_.Target.Mode) } }
            if ($testPlayback) {
                $PSBoundParameters['SubscriptionId'] = . (Join-Path $PSScriptRoot '..' 'utils' 'Get-SubscriptionIdTestSafe.ps1')
            } else {
                $PSBoundParameters['SubscriptionId'] = (Get-AzContext).Subscription.Id
            }
        }

        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {

        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {

        throw
    }

}
end {
    try {
        $steppablePipeline.End()

    } catch {

        throw
    }
} 
}

<#
.Synopsis
Creates or updates a devcenter encryption set resource
.Description
Creates or updates a devcenter encryption set resource
.Example
{{ Add code here }}
.Example
{{ Add code here }}
 
.Inputs
Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.IDevCenterIdentity
.Outputs
Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.Api20240501Preview.IDevCenterEncryptionSet
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
INPUTOBJECT <IDevCenterIdentity>: Identity Parameter
  [AttachedNetworkConnectionName <String>]: The name of the attached NetworkConnection.
  [CatalogName <String>]: The name of the Catalog.
  [DevBoxDefinitionName <String>]: The name of the Dev Box definition.
  [DevCenterName <String>]: The name of the devcenter.
  [EncryptionSetName <String>]: The name of the devcenter encryption set.
  [EnvironmentDefinitionName <String>]: The name of the Environment Definition.
  [EnvironmentTypeName <String>]: The name of the environment type.
  [GalleryName <String>]: The name of the gallery.
  [Id <String>]: Resource identity path
  [ImageName <String>]: The name of the image.
  [Location <String>]: The Azure region
  [MemberName <String>]: The name of a devcenter plan member.
  [NetworkConnectionName <String>]: Name of the Network Connection that can be applied to a Pool.
  [OperationId <String>]: The ID of an ongoing async operation
  [PlanName <String>]: The name of the devcenter plan.
  [PoolName <String>]: Name of the pool.
  [ProjectName <String>]: The name of the project.
  [ResourceGroupName <String>]: The name of the resource group. The name is case insensitive.
  [ScheduleName <String>]: The name of the schedule that uniquely identifies it.
  [SubscriptionId <String>]: The ID of the target subscription.
  [TaskName <String>]: The name of the Task.
  [VersionName <String>]: The version of the image.
.Link
https://learn.microsoft.com/powershell/module/az.devcenter/new-azdevcenteradminencryptionset
#>

function New-AzDevCenterAdminEncryptionSet {
[OutputType([Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.Api20240501Preview.IDevCenterEncryptionSet])]
[CmdletBinding(DefaultParameterSetName='CreateExpanded', PositionalBinding=$false, SupportsShouldProcess, ConfirmImpact='Medium')]
param(
    [Parameter(ParameterSetName='CreateExpanded', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [System.String]
    # The name of the devcenter.
    ${DevCenterName},

    [Parameter(ParameterSetName='CreateExpanded', Mandatory)]
    [Alias('EncryptionSetName')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [System.String]
    # The name of the devcenter encryption set.
    ${Name},

    [Parameter(ParameterSetName='CreateExpanded', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [System.String]
    # The name of the resource group.
    # The name is case insensitive.
    ${ResourceGroupName},

    [Parameter(ParameterSetName='CreateExpanded')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.DefaultInfo(Script='(Get-AzContext).Subscription.Id')]
    [System.String]
    # The ID of the target subscription.
    ${SubscriptionId},

    [Parameter(ParameterSetName='CreateViaIdentityExpanded', Mandatory, ValueFromPipeline)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.IDevCenterIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter(Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [System.String]
    # The geo-location where the resource lives
    ${Location},

    [Parameter()]
    [ArgumentCompleter([Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Support.DevboxDisksEncryptionEnableStatus])]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Support.DevboxDisksEncryptionEnableStatus]
    # Devbox disk encryption enable or disable status.
    # Indicates if Devbox disks encryption using DevCenter CMK is enabled or not.
    ${DevboxDisksEncryptionEnableStatus},

    [Parameter()]
    [ArgumentCompleter([Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Support.ManagedServiceIdentityType])]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Support.ManagedServiceIdentityType]
    # Type of managed service identity (where both SystemAssigned and UserAssigned types are allowed).
    ${IdentityType},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.Info(PossibleTypes=([Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.Api40.IUserAssignedIdentities]))]
    [System.Collections.Hashtable]
    # The set of user assigned identities associated with the resource.
    # The userAssignedIdentities dictionary keys will be ARM resource ids in the form: '/subscriptions/{subscriptionId}/resourceGroups/{resourceGroupName}/providers/Microsoft.ManagedIdentity/userAssignedIdentities/{identityName}.
    # The dictionary values can be empty objects ({}) in requests.
    ${IdentityUserAssignedIdentity},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [System.String]
    # Key encryption key Url, versioned or non-versioned.
    # Ex: https://contosovault.vault.azure.net/keys/contosokek/562a4bb76b524a1493a6afe8e536ee78 or https://contosovault.vault.azure.net/keys/contosokek.
    ${KeyEncryptionKeyUrl},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.Info(PossibleTypes=([Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.Api40.ITrackedResourceTags]))]
    [System.Collections.Hashtable]
    # Resource tags.
    ${Tag},

    [Parameter()]
    [Alias('AzureRMContext', 'AzureCredential')]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Azure')]
    [System.Management.Automation.PSObject]
    # The DefaultProfile parameter is not functional.
    # Use the SubscriptionId parameter when available if executing the cmdlet against a different subscription.
    ${DefaultProfile},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Run the command as a job
    ${AsJob},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Run the command asynchronously
    ${NoWait},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        $mapping = @{
            CreateExpanded = 'Az.DevCenter.private\New-AzDevCenterAdminEncryptionSet_CreateExpanded';
            CreateViaIdentityExpanded = 'Az.DevCenter.private\New-AzDevCenterAdminEncryptionSet_CreateViaIdentityExpanded';
        }
        if (('CreateExpanded') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('SubscriptionId')) {
            $testPlayback = $false
            $PSBoundParameters['HttpPipelinePrepend'] | Foreach-Object { if ($_) { $testPlayback = $testPlayback -or ('Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.PipelineMock' -eq $_.Target.GetType().FullName -and 'Playback' -eq $_.Target.Mode) } }
            if ($testPlayback) {
                $PSBoundParameters['SubscriptionId'] = . (Join-Path $PSScriptRoot '..' 'utils' 'Get-SubscriptionIdTestSafe.ps1')
            } else {
                $PSBoundParameters['SubscriptionId'] = (Get-AzContext).Subscription.Id
            }
        }

        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {

        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {

        throw
    }

}
end {
    try {
        $steppablePipeline.End()

    } catch {

        throw
    }
} 
}

<#
.Synopsis
Creates or updates a gallery.
.Description
Creates or updates a gallery.
.Example
New-AzDevCenterAdminGallery -DevCenterName Contoso -Name StandardGallery -ResourceGroupName testRg -GalleryResourceId "/subscriptions/0ac520ee-14c0-480f-b6c9-0a90c58ffff/resourceGroups/rg1/providers/Microsoft.Compute/galleries/StandardGallery"
.Example
$gallery = @{"ResourceGroupName" = "testRg"; "DevCenterName" = "Contoso"; "GalleryName" = "StandardGallery"; "SubscriptionId" = "0ac520ee-14c0-480f-b6c9-0a90c58ffff"}
New-AzDevCenterAdminGallery -InputObject $gallery -GalleryResourceId "/subscriptions/0ac520ee-14c0-480f-b6c9-0a90c58ffff/resourceGroups/rg1/providers/Microsoft.Compute/galleries/StandardGallery"
 
.Inputs
Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.IDevCenterIdentity
.Outputs
Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.Api20240501Preview.IGallery
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
INPUTOBJECT <IDevCenterIdentity>: Identity Parameter
  [AttachedNetworkConnectionName <String>]: The name of the attached NetworkConnection.
  [CatalogName <String>]: The name of the Catalog.
  [DevBoxDefinitionName <String>]: The name of the Dev Box definition.
  [DevCenterName <String>]: The name of the devcenter.
  [EncryptionSetName <String>]: The name of the devcenter encryption set.
  [EnvironmentDefinitionName <String>]: The name of the Environment Definition.
  [EnvironmentTypeName <String>]: The name of the environment type.
  [GalleryName <String>]: The name of the gallery.
  [Id <String>]: Resource identity path
  [ImageName <String>]: The name of the image.
  [Location <String>]: The Azure region
  [MemberName <String>]: The name of a devcenter plan member.
  [NetworkConnectionName <String>]: Name of the Network Connection that can be applied to a Pool.
  [OperationId <String>]: The ID of an ongoing async operation
  [PlanName <String>]: The name of the devcenter plan.
  [PoolName <String>]: Name of the pool.
  [ProjectName <String>]: The name of the project.
  [ResourceGroupName <String>]: The name of the resource group. The name is case insensitive.
  [ScheduleName <String>]: The name of the schedule that uniquely identifies it.
  [SubscriptionId <String>]: The ID of the target subscription.
  [TaskName <String>]: The name of the Task.
  [VersionName <String>]: The version of the image.
.Link
https://learn.microsoft.com/powershell/module/az.devcenter/new-azdevcenteradmingallery
#>

function New-AzDevCenterAdminGallery {
[OutputType([Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.Api20240501Preview.IGallery])]
[CmdletBinding(DefaultParameterSetName='CreateExpanded', PositionalBinding=$false, SupportsShouldProcess, ConfirmImpact='Medium')]
param(
    [Parameter(ParameterSetName='CreateExpanded', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [System.String]
    # The name of the devcenter.
    ${DevCenterName},

    [Parameter(ParameterSetName='CreateExpanded', Mandatory)]
    [Alias('GalleryName')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [System.String]
    # The name of the gallery.
    ${Name},

    [Parameter(ParameterSetName='CreateExpanded', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [System.String]
    # The name of the resource group.
    # The name is case insensitive.
    ${ResourceGroupName},

    [Parameter(ParameterSetName='CreateExpanded')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.DefaultInfo(Script='(Get-AzContext).Subscription.Id')]
    [System.String]
    # The ID of the target subscription.
    ${SubscriptionId},

    [Parameter(ParameterSetName='CreateViaIdentityExpanded', Mandatory, ValueFromPipeline)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.IDevCenterIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [System.String]
    # The resource ID of the backing Azure Compute Gallery.
    ${GalleryResourceId},

    [Parameter()]
    [Alias('AzureRMContext', 'AzureCredential')]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Azure')]
    [System.Management.Automation.PSObject]
    # The DefaultProfile parameter is not functional.
    # Use the SubscriptionId parameter when available if executing the cmdlet against a different subscription.
    ${DefaultProfile},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Run the command as a job
    ${AsJob},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Run the command asynchronously
    ${NoWait},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        $mapping = @{
            CreateExpanded = 'Az.DevCenter.private\New-AzDevCenterAdminGallery_CreateExpanded';
            CreateViaIdentityExpanded = 'Az.DevCenter.private\New-AzDevCenterAdminGallery_CreateViaIdentityExpanded';
        }
        if (('CreateExpanded') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('SubscriptionId')) {
            $testPlayback = $false
            $PSBoundParameters['HttpPipelinePrepend'] | Foreach-Object { if ($_) { $testPlayback = $testPlayback -or ('Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.PipelineMock' -eq $_.Target.GetType().FullName -and 'Playback' -eq $_.Target.Mode) } }
            if ($testPlayback) {
                $PSBoundParameters['SubscriptionId'] = . (Join-Path $PSScriptRoot '..' 'utils' 'Get-SubscriptionIdTestSafe.ps1')
            } else {
                $PSBoundParameters['SubscriptionId'] = (Get-AzContext).Subscription.Id
            }
        }

        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {

        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {

        throw
    }

}
end {
    try {
        $steppablePipeline.End()

    } catch {

        throw
    }
} 
}

<#
.Synopsis
Creates or updates a Network Connections resource
.Description
Creates or updates a Network Connections resource
.Example
New-AzDevCenterAdminNetworkConnection -Name eastusNetwork -ResourceGroupName testRg -Location westus3 -DomainJoinType AzureADJoin -NetworkingResourceGroupName NetworkInterfaces -SubnetId "/subscriptions/00000000-0000-0000-0000-000000000000/resourceGroups/ExampleRG/providers/Microsoft.Network/virtualNetworks/ExampleVNet/subnets/default"
 
.Example
New-AzDevCenterAdminNetworkConnection -Name eastusNetwork -ResourceGroupName testRg -Location westus3 -DomainJoinType HybridAzureADJoin -DomainName mydomaincontroller.local -DomainPassword $password -DomainUsername testuser@mydomaincontroller.local -NetworkingResourceGroupName NetworkInterfaces -SubnetId "/subscriptions/00000000-0000-0000-0000-000000000000/resourceGroups/ExampleRG/providers/Microsoft.Network/virtualNetworks/ExampleVNet/subnets/default"
.Example
$networkConnection = @{"ResourceGroupName" = "testRg"; "NetworkConnectionName" = "eastusNetwork"; "SubscriptionId" = "0ac520ee-14c0-480f-b6c9-0a90c58ffff"}
New-AzDevCenterAdminNetworkConnection -InputObject $networkConnection -Location westus3 -DomainJoinType AzureADJoin -NetworkingResourceGroupName NetworkInterfaces -SubnetId "/subscriptions/00000000-0000-0000-0000-000000000000/resourceGroups/ExampleRG/providers/Microsoft.Network/virtualNetworks/ExampleVNet/subnets/default"
.Example
$networkConnection = @{"ResourceGroupName" = "testRg"; "NetworkConnectionName" = "eastusNetwork"; "SubscriptionId" = "0ac520ee-14c0-480f-b6c9-0a90c58ffff"}
New-AzDevCenterAdminNetworkConnection -InputObject $networkConnection -Location westus3 -DomainJoinType HybridAzureADJoin -DomainName mydomaincontroller.local -DomainPassword $password -DomainUsername testuser@mydomaincontroller.local -NetworkingResourceGroupName NetworkInterfaces -SubnetId "/subscriptions/00000000-0000-0000-0000-000000000000/resourceGroups/ExampleRG/providers/Microsoft.Network/virtualNetworks/ExampleVNet/subnets/default"
 
.Inputs
Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.IDevCenterIdentity
.Outputs
Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.Api20240501Preview.INetworkConnection
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
INPUTOBJECT <IDevCenterIdentity>: Identity Parameter
  [AttachedNetworkConnectionName <String>]: The name of the attached NetworkConnection.
  [CatalogName <String>]: The name of the Catalog.
  [DevBoxDefinitionName <String>]: The name of the Dev Box definition.
  [DevCenterName <String>]: The name of the devcenter.
  [EncryptionSetName <String>]: The name of the devcenter encryption set.
  [EnvironmentDefinitionName <String>]: The name of the Environment Definition.
  [EnvironmentTypeName <String>]: The name of the environment type.
  [GalleryName <String>]: The name of the gallery.
  [Id <String>]: Resource identity path
  [ImageName <String>]: The name of the image.
  [Location <String>]: The Azure region
  [MemberName <String>]: The name of a devcenter plan member.
  [NetworkConnectionName <String>]: Name of the Network Connection that can be applied to a Pool.
  [OperationId <String>]: The ID of an ongoing async operation
  [PlanName <String>]: The name of the devcenter plan.
  [PoolName <String>]: Name of the pool.
  [ProjectName <String>]: The name of the project.
  [ResourceGroupName <String>]: The name of the resource group. The name is case insensitive.
  [ScheduleName <String>]: The name of the schedule that uniquely identifies it.
  [SubscriptionId <String>]: The ID of the target subscription.
  [TaskName <String>]: The name of the Task.
  [VersionName <String>]: The version of the image.
.Link
https://learn.microsoft.com/powershell/module/az.devcenter/new-azdevcenteradminnetworkconnection
#>

function New-AzDevCenterAdminNetworkConnection {
[OutputType([Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.Api20240501Preview.INetworkConnection])]
[CmdletBinding(DefaultParameterSetName='CreateExpanded', PositionalBinding=$false, SupportsShouldProcess, ConfirmImpact='Medium')]
param(
    [Parameter(ParameterSetName='CreateExpanded', Mandatory)]
    [Alias('NetworkConnectionName')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [System.String]
    # Name of the Network Connection that can be applied to a Pool.
    ${Name},

    [Parameter(ParameterSetName='CreateExpanded', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [System.String]
    # The name of the resource group.
    # The name is case insensitive.
    ${ResourceGroupName},

    [Parameter(ParameterSetName='CreateExpanded')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.DefaultInfo(Script='(Get-AzContext).Subscription.Id')]
    [System.String]
    # The ID of the target subscription.
    ${SubscriptionId},

    [Parameter(ParameterSetName='CreateViaIdentityExpanded', Mandatory, ValueFromPipeline)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.IDevCenterIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter(Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [System.String]
    # The geo-location where the resource lives
    ${Location},

    [Parameter()]
    [ArgumentCompleter([Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Support.DomainJoinType])]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Support.DomainJoinType]
    # AAD Join type.
    ${DomainJoinType},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [System.String]
    # Active Directory domain name
    ${DomainName},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [System.String]
    # The password for the account used to join domain
    ${DomainPassword},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [System.String]
    # The username of an Active Directory account (user or service account) that has permissions to create computer objects in Active Directory.
    # Required format: admin@contoso.com.
    ${DomainUsername},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [System.String]
    # The name for resource group where NICs will be placed.
    ${NetworkingResourceGroupName},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [System.String]
    # Active Directory domain Organization Unit (OU)
    ${OrganizationUnit},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [System.String]
    # The subnet to attach Virtual Machines to
    ${SubnetId},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.Info(PossibleTypes=([Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.Api40.ITrackedResourceTags]))]
    [System.Collections.Hashtable]
    # Resource tags.
    ${Tag},

    [Parameter()]
    [Alias('AzureRMContext', 'AzureCredential')]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Azure')]
    [System.Management.Automation.PSObject]
    # The DefaultProfile parameter is not functional.
    # Use the SubscriptionId parameter when available if executing the cmdlet against a different subscription.
    ${DefaultProfile},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Run the command as a job
    ${AsJob},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Run the command asynchronously
    ${NoWait},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        $mapping = @{
            CreateExpanded = 'Az.DevCenter.private\New-AzDevCenterAdminNetworkConnection_CreateExpanded';
            CreateViaIdentityExpanded = 'Az.DevCenter.private\New-AzDevCenterAdminNetworkConnection_CreateViaIdentityExpanded';
        }
        if (('CreateExpanded') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('SubscriptionId')) {
            $testPlayback = $false
            $PSBoundParameters['HttpPipelinePrepend'] | Foreach-Object { if ($_) { $testPlayback = $testPlayback -or ('Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.PipelineMock' -eq $_.Target.GetType().FullName -and 'Playback' -eq $_.Target.Mode) } }
            if ($testPlayback) {
                $PSBoundParameters['SubscriptionId'] = . (Join-Path $PSScriptRoot '..' 'utils' 'Get-SubscriptionIdTestSafe.ps1')
            } else {
                $PSBoundParameters['SubscriptionId'] = (Get-AzContext).Subscription.Id
            }
        }

        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {

        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {

        throw
    }

}
end {
    try {
        $steppablePipeline.End()

    } catch {

        throw
    }
} 
}

<#
.Synopsis
Creates or updates a devcenter plan member resource
.Description
Creates or updates a devcenter plan member resource
.Example
$tags = @{"dev" ="test"}
New-AzDevCenterAdminPlanMember -PlanName ContosoPlan -MemberName d702f662-b3f2-4796-9e8c-13c22378ced3 -ResourceGroupName testRg -Tag $tags -MemberId d702f662-b3f2-4796-9e8c-13c22378ced3 -MemberType User
.Example
$tags = @{"dev" ="test"}
$planMember = @{"ResourceGroupName" = "testRg"; "PlanName" = "ContosoPlan"; "MemberName" = "d702f662-b3f2-4796-9e8c-13c22378ced3"; "SubscriptionId" = "0ac520ee-14c0-480f-b6c9-0a90c58ffff"}
New-AzDevCenterAdminPlanMember -InputObject $planMember -Tag $tags -MemberId d702f662-b3f2-4796-9e8c-13c22378ced3 -MemberType User
 
.Inputs
Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.IDevCenterIdentity
.Outputs
Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.Api20240501Preview.IDevCenterPlanMember
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
INPUTOBJECT <IDevCenterIdentity>: Identity Parameter
  [AttachedNetworkConnectionName <String>]: The name of the attached NetworkConnection.
  [CatalogName <String>]: The name of the Catalog.
  [DevBoxDefinitionName <String>]: The name of the Dev Box definition.
  [DevCenterName <String>]: The name of the devcenter.
  [EncryptionSetName <String>]: The name of the devcenter encryption set.
  [EnvironmentDefinitionName <String>]: The name of the Environment Definition.
  [EnvironmentTypeName <String>]: The name of the environment type.
  [GalleryName <String>]: The name of the gallery.
  [Id <String>]: Resource identity path
  [ImageName <String>]: The name of the image.
  [Location <String>]: The Azure region
  [MemberName <String>]: The name of a devcenter plan member.
  [NetworkConnectionName <String>]: Name of the Network Connection that can be applied to a Pool.
  [OperationId <String>]: The ID of an ongoing async operation
  [PlanName <String>]: The name of the devcenter plan.
  [PoolName <String>]: Name of the pool.
  [ProjectName <String>]: The name of the project.
  [ResourceGroupName <String>]: The name of the resource group. The name is case insensitive.
  [ScheduleName <String>]: The name of the schedule that uniquely identifies it.
  [SubscriptionId <String>]: The ID of the target subscription.
  [TaskName <String>]: The name of the Task.
  [VersionName <String>]: The version of the image.
.Link
https://learn.microsoft.com/powershell/module/az.devcenter/new-azdevcenteradminplanmember
#>

function New-AzDevCenterAdminPlanMember {
[OutputType([Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.Api20240501Preview.IDevCenterPlanMember])]
[CmdletBinding(DefaultParameterSetName='CreateExpanded', PositionalBinding=$false, SupportsShouldProcess, ConfirmImpact='Medium')]
param(
    [Parameter(ParameterSetName='CreateExpanded', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [System.String]
    # The name of a devcenter plan member.
    ${MemberName},

    [Parameter(ParameterSetName='CreateExpanded', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [System.String]
    # The name of the devcenter plan.
    ${PlanName},

    [Parameter(ParameterSetName='CreateExpanded', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [System.String]
    # The name of the resource group.
    # The name is case insensitive.
    ${ResourceGroupName},

    [Parameter(ParameterSetName='CreateExpanded')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.DefaultInfo(Script='(Get-AzContext).Subscription.Id')]
    [System.String]
    # The ID of the target subscription.
    ${SubscriptionId},

    [Parameter(ParameterSetName='CreateViaIdentityExpanded', Mandatory, ValueFromPipeline)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.IDevCenterIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [System.String]
    # The unique id of the member.
    ${MemberId},

    [Parameter()]
    [ArgumentCompleter([Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Support.PlanMemberType])]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Support.PlanMemberType]
    # The type of the member (user, group)
    ${MemberType},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.Info(PossibleTypes=([Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.Api20240501Preview.ITags]))]
    [System.Collections.Hashtable]
    # Resource tags.
    ${PropertiesTag},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.Info(PossibleTypes=([Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.Api20240501Preview.ITags]))]
    [System.Collections.Hashtable]
    # Resource tags.
    ${Tag},

    [Parameter()]
    [Alias('AzureRMContext', 'AzureCredential')]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Azure')]
    [System.Management.Automation.PSObject]
    # The DefaultProfile parameter is not functional.
    # Use the SubscriptionId parameter when available if executing the cmdlet against a different subscription.
    ${DefaultProfile},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Run the command as a job
    ${AsJob},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Run the command asynchronously
    ${NoWait},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        $mapping = @{
            CreateExpanded = 'Az.DevCenter.private\New-AzDevCenterAdminPlanMember_CreateExpanded';
            CreateViaIdentityExpanded = 'Az.DevCenter.private\New-AzDevCenterAdminPlanMember_CreateViaIdentityExpanded';
        }
        if (('CreateExpanded') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('SubscriptionId')) {
            $testPlayback = $false
            $PSBoundParameters['HttpPipelinePrepend'] | Foreach-Object { if ($_) { $testPlayback = $testPlayback -or ('Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.PipelineMock' -eq $_.Target.GetType().FullName -and 'Playback' -eq $_.Target.Mode) } }
            if ($testPlayback) {
                $PSBoundParameters['SubscriptionId'] = . (Join-Path $PSScriptRoot '..' 'utils' 'Get-SubscriptionIdTestSafe.ps1')
            } else {
                $PSBoundParameters['SubscriptionId'] = (Get-AzContext).Subscription.Id
            }
        }

        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {

        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {

        throw
    }

}
end {
    try {
        $steppablePipeline.End()

    } catch {

        throw
    }
} 
}

<#
.Synopsis
Creates or updates a devcenter plan resource
.Description
Creates or updates a devcenter plan resource
.Example
New-AzDevCenterAdminPlan -Name ContosoPlan -ResourceGroupName testRg -Location eastus -SkuName CCOG_Standard
.Example
$plan = @{"ResourceGroupName" = "testRg"; "PlanName" = "ContosoPlan"; "SubscriptionId" = "0ac520ee-14c0-480f-b6c9-0a90c58ffff"}
New-AzDevCenterAdminPlan -InputObject $plan -Location eastus -SkuName CCOG_Standard
 
.Inputs
Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.IDevCenterIdentity
.Outputs
Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.Api20240501Preview.IDevCenterPlan
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
INPUTOBJECT <IDevCenterIdentity>: Identity Parameter
  [AttachedNetworkConnectionName <String>]: The name of the attached NetworkConnection.
  [CatalogName <String>]: The name of the Catalog.
  [DevBoxDefinitionName <String>]: The name of the Dev Box definition.
  [DevCenterName <String>]: The name of the devcenter.
  [EncryptionSetName <String>]: The name of the devcenter encryption set.
  [EnvironmentDefinitionName <String>]: The name of the Environment Definition.
  [EnvironmentTypeName <String>]: The name of the environment type.
  [GalleryName <String>]: The name of the gallery.
  [Id <String>]: Resource identity path
  [ImageName <String>]: The name of the image.
  [Location <String>]: The Azure region
  [MemberName <String>]: The name of a devcenter plan member.
  [NetworkConnectionName <String>]: Name of the Network Connection that can be applied to a Pool.
  [OperationId <String>]: The ID of an ongoing async operation
  [PlanName <String>]: The name of the devcenter plan.
  [PoolName <String>]: Name of the pool.
  [ProjectName <String>]: The name of the project.
  [ResourceGroupName <String>]: The name of the resource group. The name is case insensitive.
  [ScheduleName <String>]: The name of the schedule that uniquely identifies it.
  [SubscriptionId <String>]: The ID of the target subscription.
  [TaskName <String>]: The name of the Task.
  [VersionName <String>]: The version of the image.
.Link
https://learn.microsoft.com/powershell/module/az.devcenter/new-azdevcenteradminplan
#>

function New-AzDevCenterAdminPlan {
[OutputType([Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.Api20240501Preview.IDevCenterPlan])]
[CmdletBinding(DefaultParameterSetName='CreateExpanded', PositionalBinding=$false, SupportsShouldProcess, ConfirmImpact='Medium')]
param(
    [Parameter(ParameterSetName='CreateExpanded', Mandatory)]
    [Alias('PlanName')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [System.String]
    # The name of the devcenter plan.
    ${Name},

    [Parameter(ParameterSetName='CreateExpanded', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [System.String]
    # The name of the resource group.
    # The name is case insensitive.
    ${ResourceGroupName},

    [Parameter(ParameterSetName='CreateExpanded')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.DefaultInfo(Script='(Get-AzContext).Subscription.Id')]
    [System.String]
    # The ID of the target subscription.
    ${SubscriptionId},

    [Parameter(ParameterSetName='CreateViaIdentityExpanded', Mandatory, ValueFromPipeline)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.IDevCenterIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter(Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [System.String]
    # The geo-location where the resource lives
    ${Location},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [System.Int32]
    # If the SKU supports scale out/in then the capacity integer should be included.
    # If scale out/in is not possible for the resource this may be omitted.
    ${SkuCapacity},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [System.String]
    # If the service has different generations of hardware, for the same SKU, then that can be captured here.
    ${SkuFamily},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [System.String]
    # The name of the SKU.
    # E.g.
    # P3.
    # It is typically a letter+number code
    ${SkuName},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [System.String]
    # The SKU size.
    # When the name field is the combination of tier and some other value, this would be the standalone code.
    ${SkuSize},

    [Parameter()]
    [ArgumentCompleter([Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Support.SkuTier])]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Support.SkuTier]
    # This field is required to be implemented by the Resource Provider if the service has more than one tier, but is not required on a PUT.
    ${SkuTier},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.Info(PossibleTypes=([Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.Api40.ITrackedResourceTags]))]
    [System.Collections.Hashtable]
    # Resource tags.
    ${Tag},

    [Parameter()]
    [Alias('AzureRMContext', 'AzureCredential')]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Azure')]
    [System.Management.Automation.PSObject]
    # The DefaultProfile parameter is not functional.
    # Use the SubscriptionId parameter when available if executing the cmdlet against a different subscription.
    ${DefaultProfile},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Run the command as a job
    ${AsJob},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Run the command asynchronously
    ${NoWait},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        $mapping = @{
            CreateExpanded = 'Az.DevCenter.private\New-AzDevCenterAdminPlan_CreateExpanded';
            CreateViaIdentityExpanded = 'Az.DevCenter.private\New-AzDevCenterAdminPlan_CreateViaIdentityExpanded';
        }
        if (('CreateExpanded') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('SubscriptionId')) {
            $testPlayback = $false
            $PSBoundParameters['HttpPipelinePrepend'] | Foreach-Object { if ($_) { $testPlayback = $testPlayback -or ('Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.PipelineMock' -eq $_.Target.GetType().FullName -and 'Playback' -eq $_.Target.Mode) } }
            if ($testPlayback) {
                $PSBoundParameters['SubscriptionId'] = . (Join-Path $PSScriptRoot '..' 'utils' 'Get-SubscriptionIdTestSafe.ps1')
            } else {
                $PSBoundParameters['SubscriptionId'] = (Get-AzContext).Subscription.Id
            }
        }

        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {

        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {

        throw
    }

}
end {
    try {
        $steppablePipeline.End()

    } catch {

        throw
    }
} 
}

<#
.Synopsis
Creates or updates a machine pool
.Description
Creates or updates a machine pool
.Example
New-AzDevCenterAdminPool -Name DevPool -ProjectName DevProject -ResourceGroupName testRg -Location westus2 -DevBoxDefinitionName WebDevBox -LocalAdministrator "Enabled" -NetworkConnectionName Network1westus2
.Example
$pool = @{"ResourceGroupName" = "testRg"; "ProjectName" = "DevProject"; "PoolName" = "DevPool"; "SubscriptionId" = "0ac520ee-14c0-480f-b6c9-0a90c58ffff"}
New-AzDevCenterAdminPool -InputObject $pool -Location westus2 -DevBoxDefinitionName WebDevBox -LocalAdministrator "Enabled" -NetworkConnectionName Network1westus2
 
.Inputs
Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.IDevCenterIdentity
.Outputs
Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.Api20240501Preview.IPool
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
INPUTOBJECT <IDevCenterIdentity>: Identity Parameter
  [AttachedNetworkConnectionName <String>]: The name of the attached NetworkConnection.
  [CatalogName <String>]: The name of the Catalog.
  [DevBoxDefinitionName <String>]: The name of the Dev Box definition.
  [DevCenterName <String>]: The name of the devcenter.
  [EncryptionSetName <String>]: The name of the devcenter encryption set.
  [EnvironmentDefinitionName <String>]: The name of the Environment Definition.
  [EnvironmentTypeName <String>]: The name of the environment type.
  [GalleryName <String>]: The name of the gallery.
  [Id <String>]: Resource identity path
  [ImageName <String>]: The name of the image.
  [Location <String>]: The Azure region
  [MemberName <String>]: The name of a devcenter plan member.
  [NetworkConnectionName <String>]: Name of the Network Connection that can be applied to a Pool.
  [OperationId <String>]: The ID of an ongoing async operation
  [PlanName <String>]: The name of the devcenter plan.
  [PoolName <String>]: Name of the pool.
  [ProjectName <String>]: The name of the project.
  [ResourceGroupName <String>]: The name of the resource group. The name is case insensitive.
  [ScheduleName <String>]: The name of the schedule that uniquely identifies it.
  [SubscriptionId <String>]: The ID of the target subscription.
  [TaskName <String>]: The name of the Task.
  [VersionName <String>]: The version of the image.
.Link
https://learn.microsoft.com/powershell/module/az.devcenter/new-azdevcenteradminpool
#>

function New-AzDevCenterAdminPool {
[OutputType([Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.Api20240501Preview.IPool])]
[CmdletBinding(DefaultParameterSetName='CreateExpanded', PositionalBinding=$false, SupportsShouldProcess, ConfirmImpact='Medium')]
param(
    [Parameter(ParameterSetName='CreateExpanded', Mandatory)]
    [Alias('PoolName')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [System.String]
    # Name of the pool.
    ${Name},

    [Parameter(ParameterSetName='CreateExpanded', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [System.String]
    # The name of the project.
    ${ProjectName},

    [Parameter(ParameterSetName='CreateExpanded', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [System.String]
    # The name of the resource group.
    # The name is case insensitive.
    ${ResourceGroupName},

    [Parameter(ParameterSetName='CreateExpanded')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.DefaultInfo(Script='(Get-AzContext).Subscription.Id')]
    [System.String]
    # The ID of the target subscription.
    ${SubscriptionId},

    [Parameter(ParameterSetName='CreateViaIdentityExpanded', Mandatory, ValueFromPipeline)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.IDevCenterIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter(Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [System.String]
    # The geo-location where the resource lives
    ${Location},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [System.String]
    # Name of a Dev Box definition in parent Project of this Pool
    ${DevBoxDefinitionName},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [System.String]
    # The display name of the pool.
    ${DisplayName},

    [Parameter()]
    [ArgumentCompleter([Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Support.LocalAdminStatus])]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Support.LocalAdminStatus]
    # Indicates whether owners of Dev Boxes in this pool are added as local administrators on the Dev Box.
    ${LocalAdministrator},

    [Parameter()]
    [AllowEmptyCollection()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [System.String[]]
    # The regions of the managed virtual network (required when managedNetworkType is Managed).
    ${ManagedVirtualNetworkRegion},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [System.String]
    # Name of a Network Connection in parent Project of this Pool
    ${NetworkConnectionName},

    [Parameter()]
    [ArgumentCompleter([Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Support.SingleSignOnStatus])]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Support.SingleSignOnStatus]
    # Indicates whether Dev Boxes in this pool are created with single sign on enabled.
    # The also requires that single sign on be enabled on the tenant.
    ${SingleSignOnStatus},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [System.Int32]
    # The specified time in minutes to wait before stopping a Dev Box once disconnect is detected.
    ${StopOnDisconnectGracePeriodMinute},

    [Parameter()]
    [ArgumentCompleter([Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Support.StopOnDisconnectEnableStatus])]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Support.StopOnDisconnectEnableStatus]
    # Whether the feature to stop the Dev Box on disconnect once the grace period has lapsed is enabled.
    ${StopOnDisconnectStatus},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.Info(PossibleTypes=([Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.Api40.ITrackedResourceTags]))]
    [System.Collections.Hashtable]
    # Resource tags.
    ${Tag},

    [Parameter()]
    [ArgumentCompleter([Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Support.VirtualNetworkType])]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Support.VirtualNetworkType]
    # Indicates whether the pool uses a Virtual Network managed by Microsoft or a customer provided network.
    ${VirtualNetworkType},

    [Parameter()]
    [Alias('AzureRMContext', 'AzureCredential')]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Azure')]
    [System.Management.Automation.PSObject]
    # The DefaultProfile parameter is not functional.
    # Use the SubscriptionId parameter when available if executing the cmdlet against a different subscription.
    ${DefaultProfile},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Run the command as a job
    ${AsJob},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Run the command asynchronously
    ${NoWait},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        $mapping = @{
            CreateExpanded = 'Az.DevCenter.private\New-AzDevCenterAdminPool_CreateExpanded';
            CreateViaIdentityExpanded = 'Az.DevCenter.private\New-AzDevCenterAdminPool_CreateViaIdentityExpanded';
        }
        if (('CreateExpanded') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('SubscriptionId')) {
            $testPlayback = $false
            $PSBoundParameters['HttpPipelinePrepend'] | Foreach-Object { if ($_) { $testPlayback = $testPlayback -or ('Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.PipelineMock' -eq $_.Target.GetType().FullName -and 'Playback' -eq $_.Target.Mode) } }
            if ($testPlayback) {
                $PSBoundParameters['SubscriptionId'] = . (Join-Path $PSScriptRoot '..' 'utils' 'Get-SubscriptionIdTestSafe.ps1')
            } else {
                $PSBoundParameters['SubscriptionId'] = (Get-AzContext).Subscription.Id
            }
        }
        if (('CreateExpanded', 'CreateViaIdentityExpanded') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('LicenseType')) {
            $PSBoundParameters['LicenseType'] = "Windows_Client"
        }

        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {

        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {

        throw
    }

}
end {
    try {
        $steppablePipeline.End()

    } catch {

        throw
    }
} 
}

<#
.Synopsis
Creates or updates a project catalog.
.Description
Creates or updates a project catalog.
.Example
New-AzDevCenterAdminProjectCatalog -ProjectName DevProject -Name CentralCatalog -ResourceGroupName testRg -AdoGitBranch main -AdoGitPath "/templates" -AdoGitSecretIdentifier "https://contosokv.vault.azure.net/secrets/CentralRepoPat" -AdoGitUri "https://contoso@dev.azure.com/contoso/contosoOrg/_git/centralrepo-fakecontoso"
.Example
New-AzDevCenterAdminProjectCatalog -ProjectName DevProject -Name CentralCatalog -ResourceGroupName testRg -GitHubBranch main -GitHubPath "/templates" -GitHubSecretIdentifier "https://contosokv.vault.azure.net/secrets/CentralRepoPat" -GitHubUri "https://github.com/DevProject/centralrepo-fake.git"
.Example
$catalog = @{"ResourceGroupName" = "testRg"; "ProjectName" = "DevProject"; "CatalogName" = "CentralCatalog"; "SubscriptionId" = "0ac520ee-14c0-480f-b6c9-0a90c58ffff"}
New-AzDevCenterAdminProjectCatalog -InputObject $catalog -AdoGitBranch main -AdoGitPath "/templates" -AdoGitSecretIdentifier "https://contosokv.vault.azure.net/secrets/CentralRepoPat" -AdoGitUri "https://contoso@dev.azure.com/contoso/contosoOrg/_git/centralrepo-fakecontoso"
.Example
$catalog = @{"ResourceGroupName" = "testRg"; "ProjectName" = "DevProject"; "CatalogName" = "CentralCatalog"; "SubscriptionId" = "0ac520ee-14c0-480f-b6c9-0a90c58ffff"}
New-AzDevCenterAdminProjectCatalog -InputObject $catalog -GitHubBranch main -GitHubPath "/templates" -GitHubSecretIdentifier "https://contosokv.vault.azure.net/secrets/CentralRepoPat" -GitHubUri "https://github.com/DevProject/centralrepo-fake.git"
 
.Inputs
Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.IDevCenterIdentity
.Outputs
Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.Api20240501Preview.ICatalog
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
INPUTOBJECT <IDevCenterIdentity>: Identity Parameter
  [AttachedNetworkConnectionName <String>]: The name of the attached NetworkConnection.
  [CatalogName <String>]: The name of the Catalog.
  [DevBoxDefinitionName <String>]: The name of the Dev Box definition.
  [DevCenterName <String>]: The name of the devcenter.
  [EncryptionSetName <String>]: The name of the devcenter encryption set.
  [EnvironmentDefinitionName <String>]: The name of the Environment Definition.
  [EnvironmentTypeName <String>]: The name of the environment type.
  [GalleryName <String>]: The name of the gallery.
  [Id <String>]: Resource identity path
  [ImageName <String>]: The name of the image.
  [Location <String>]: The Azure region
  [MemberName <String>]: The name of a devcenter plan member.
  [NetworkConnectionName <String>]: Name of the Network Connection that can be applied to a Pool.
  [OperationId <String>]: The ID of an ongoing async operation
  [PlanName <String>]: The name of the devcenter plan.
  [PoolName <String>]: Name of the pool.
  [ProjectName <String>]: The name of the project.
  [ResourceGroupName <String>]: The name of the resource group. The name is case insensitive.
  [ScheduleName <String>]: The name of the schedule that uniquely identifies it.
  [SubscriptionId <String>]: The ID of the target subscription.
  [TaskName <String>]: The name of the Task.
  [VersionName <String>]: The version of the image.
.Link
https://learn.microsoft.com/powershell/module/az.devcenter/new-azdevcenteradminprojectcatalog
#>

function New-AzDevCenterAdminProjectCatalog {
[OutputType([Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.Api20240501Preview.ICatalog])]
[CmdletBinding(DefaultParameterSetName='CreateExpanded', PositionalBinding=$false, SupportsShouldProcess, ConfirmImpact='Medium')]
param(
    [Parameter(ParameterSetName='CreateExpanded', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [System.String]
    # The name of the Catalog.
    ${CatalogName},

    [Parameter(ParameterSetName='CreateExpanded', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [System.String]
    # The name of the project.
    ${ProjectName},

    [Parameter(ParameterSetName='CreateExpanded', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [System.String]
    # The name of the resource group.
    # The name is case insensitive.
    ${ResourceGroupName},

    [Parameter(ParameterSetName='CreateExpanded')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.DefaultInfo(Script='(Get-AzContext).Subscription.Id')]
    [System.String]
    # The ID of the target subscription.
    ${SubscriptionId},

    [Parameter(ParameterSetName='CreateViaIdentityExpanded', Mandatory, ValueFromPipeline)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.IDevCenterIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [System.String]
    # Git branch.
    ${AdoGitBranch},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [System.String]
    # The folder where the catalog items can be found inside the repository.
    ${AdoGitPath},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [System.String]
    # A reference to the Key Vault secret containing a security token to authenticate to a Git repository.
    ${AdoGitSecretIdentifier},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [System.String]
    # Git URI.
    ${AdoGitUri},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [System.String]
    # Git branch.
    ${GitHubBranch},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [System.String]
    # The folder where the catalog items can be found inside the repository.
    ${GitHubPath},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [System.String]
    # A reference to the Key Vault secret containing a security token to authenticate to a Git repository.
    ${GitHubSecretIdentifier},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [System.String]
    # Git URI.
    ${GitHubUri},

    [Parameter()]
    [ArgumentCompleter([Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Support.CatalogSyncType])]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Support.CatalogSyncType]
    # Indicates the type of sync that is configured for the catalog.
    ${SyncType},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.Info(PossibleTypes=([Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.Api20240501Preview.ICatalogUpdatePropertiesTags]))]
    [System.Collections.Hashtable]
    # Resource tags.
    ${Tag},

    [Parameter()]
    [Alias('AzureRMContext', 'AzureCredential')]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Azure')]
    [System.Management.Automation.PSObject]
    # The DefaultProfile parameter is not functional.
    # Use the SubscriptionId parameter when available if executing the cmdlet against a different subscription.
    ${DefaultProfile},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Run the command as a job
    ${AsJob},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Run the command asynchronously
    ${NoWait},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        $mapping = @{
            CreateExpanded = 'Az.DevCenter.private\New-AzDevCenterAdminProjectCatalog_CreateExpanded';
            CreateViaIdentityExpanded = 'Az.DevCenter.private\New-AzDevCenterAdminProjectCatalog_CreateViaIdentityExpanded';
        }
        if (('CreateExpanded') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('SubscriptionId')) {
            $testPlayback = $false
            $PSBoundParameters['HttpPipelinePrepend'] | Foreach-Object { if ($_) { $testPlayback = $testPlayback -or ('Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.PipelineMock' -eq $_.Target.GetType().FullName -and 'Playback' -eq $_.Target.Mode) } }
            if ($testPlayback) {
                $PSBoundParameters['SubscriptionId'] = . (Join-Path $PSScriptRoot '..' 'utils' 'Get-SubscriptionIdTestSafe.ps1')
            } else {
                $PSBoundParameters['SubscriptionId'] = (Get-AzContext).Subscription.Id
            }
        }

        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {

        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {

        throw
    }

}
end {
    try {
        $steppablePipeline.End()

    } catch {

        throw
    }
} 
}

<#
.Synopsis
Creates or updates a project environment type.
.Description
Creates or updates a project environment type.
.Example
$identity = @{"/subscriptions/00000000-0000-0000-0000-000000000000/resourceGroups/identityGroup/providers/Microsoft.ManagedIdentity/userAssignedIdentities/testidentity1" = @{} }
$deploymentTargetId = '/subscriptions/0ac520ee-14c0-480f-b6c9-0a90c58ffff'
$creatorRoleAssignmentRole = @{"8e3af657-a8ff-443c-a75c-2fe8c4bcb635" = @{} }
$userRoleAssignment = @{
    "e45e3m7c-176e-416a-b466-0c5ec8298f8a" = @{
        "roles" = @{
            "4cbf0b6c-e750-441c-98a7-10da8387e4d6" = @{}
        }
    }
}
 
New-AzDevCenterAdminProjectEnvironmentType -EnvironmentTypeName DevTest -ProjectName DevProject -ResourceGroupName testRg -CreatorRoleAssignmentRole $creatorRoleAssignmentRole -DeploymentTargetId $deploymentTargetId -IdentityType "SystemAssigned,UserAssigned" -IdentityUserAssignedIdentity $identity -Location "westus3" -Status "Enabled" -UserRoleAssignment $userRoleAssignment
.Example
$identity = @{"/subscriptions/00000000-0000-0000-0000-000000000000/resourceGroups/identityGroup/providers/Microsoft.ManagedIdentity/userAssignedIdentities/testidentity1" = @{} }
$deploymentTargetId = '/subscriptions/0ac520ee-14c0-480f-b6c9-0a90c58ffff'
$creatorRoleAssignmentRole = @{"8e3af657-a8ff-443c-a75c-2fe8c4bcb635" = @{} }
$userRoleAssignment = @{
    "e45e3m7c-176e-416a-b466-0c5ec8298f8a" = @{
        "roles" = @{
            "4cbf0b6c-e750-441c-98a7-10da8387e4d6" = @{}
        }
    }
}
 
$envType = @{"ResourceGroupName" = "testRg"; "ProjectName" = "DevProject"; "EnvironmentTypeName" = "DevTest"; "SubscriptionId" = "0ac520ee-14c0-480f-b6c9-0a90c58ffff"}
New-AzDevCenterAdminProjectEnvironmentType -InputObject $envType -CreatorRoleAssignmentRole $creatorRoleAssignmentRole -DeploymentTargetId $deploymentTargetId -IdentityType "SystemAssigned,UserAssigned" -IdentityUserAssignedIdentity $identity -Location "westus3" -Status "Enabled" -UserRoleAssignment $userRoleAssignment
 
.Inputs
Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.IDevCenterIdentity
.Outputs
Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.Api20240501Preview.IProjectEnvironmentType
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
INPUTOBJECT <IDevCenterIdentity>: Identity Parameter
  [AttachedNetworkConnectionName <String>]: The name of the attached NetworkConnection.
  [CatalogName <String>]: The name of the Catalog.
  [DevBoxDefinitionName <String>]: The name of the Dev Box definition.
  [DevCenterName <String>]: The name of the devcenter.
  [EncryptionSetName <String>]: The name of the devcenter encryption set.
  [EnvironmentDefinitionName <String>]: The name of the Environment Definition.
  [EnvironmentTypeName <String>]: The name of the environment type.
  [GalleryName <String>]: The name of the gallery.
  [Id <String>]: Resource identity path
  [ImageName <String>]: The name of the image.
  [Location <String>]: The Azure region
  [MemberName <String>]: The name of a devcenter plan member.
  [NetworkConnectionName <String>]: Name of the Network Connection that can be applied to a Pool.
  [OperationId <String>]: The ID of an ongoing async operation
  [PlanName <String>]: The name of the devcenter plan.
  [PoolName <String>]: Name of the pool.
  [ProjectName <String>]: The name of the project.
  [ResourceGroupName <String>]: The name of the resource group. The name is case insensitive.
  [ScheduleName <String>]: The name of the schedule that uniquely identifies it.
  [SubscriptionId <String>]: The ID of the target subscription.
  [TaskName <String>]: The name of the Task.
  [VersionName <String>]: The version of the image.
.Link
https://learn.microsoft.com/powershell/module/az.devcenter/new-azdevcenteradminprojectenvironmenttype
#>

function New-AzDevCenterAdminProjectEnvironmentType {
[OutputType([Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.Api20240501Preview.IProjectEnvironmentType])]
[CmdletBinding(DefaultParameterSetName='CreateExpanded', PositionalBinding=$false, SupportsShouldProcess, ConfirmImpact='Medium')]
param(
    [Parameter(ParameterSetName='CreateExpanded', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [System.String]
    # The name of the environment type.
    ${EnvironmentTypeName},

    [Parameter(ParameterSetName='CreateExpanded', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [System.String]
    # The name of the project.
    ${ProjectName},

    [Parameter(ParameterSetName='CreateExpanded', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [System.String]
    # The name of the resource group.
    # The name is case insensitive.
    ${ResourceGroupName},

    [Parameter(ParameterSetName='CreateExpanded')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.DefaultInfo(Script='(Get-AzContext).Subscription.Id')]
    [System.String]
    # The ID of the target subscription.
    ${SubscriptionId},

    [Parameter(ParameterSetName='CreateViaIdentityExpanded', Mandatory, ValueFromPipeline)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.IDevCenterIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.Info(PossibleTypes=([Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.Api20240501Preview.IProjectEnvironmentTypeUpdatePropertiesCreatorRoleAssignmentRoles]))]
    [System.Collections.Hashtable]
    # A map of roles to assign to the environment creator.
    ${CreatorRoleAssignmentRole},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [System.String]
    # Id of a subscription that the environment type will be mapped to.
    # The environment's resources will be deployed into this subscription.
    ${DeploymentTargetId},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [System.String]
    # The display name of the project environment type.
    ${DisplayName},

    [Parameter()]
    [ArgumentCompleter([Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Support.ManagedServiceIdentityType])]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Support.ManagedServiceIdentityType]
    # Type of managed service identity (where both SystemAssigned and UserAssigned types are allowed).
    ${IdentityType},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.Info(PossibleTypes=([Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.Api40.IUserAssignedIdentities]))]
    [System.Collections.Hashtable]
    # The set of user assigned identities associated with the resource.
    # The userAssignedIdentities dictionary keys will be ARM resource ids in the form: '/subscriptions/{subscriptionId}/resourceGroups/{resourceGroupName}/providers/Microsoft.ManagedIdentity/userAssignedIdentities/{identityName}.
    # The dictionary values can be empty objects ({}) in requests.
    ${IdentityUserAssignedIdentity},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [System.String]
    # The geo-location for the environment type
    ${Location},

    [Parameter()]
    [ArgumentCompleter([Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Support.EnvironmentTypeEnableStatus])]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Support.EnvironmentTypeEnableStatus]
    # Defines whether this Environment Type can be used in this Project.
    ${Status},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.Info(PossibleTypes=([Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.Api20240501Preview.ITags]))]
    [System.Collections.Hashtable]
    # Resource tags.
    ${Tag},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.Info(PossibleTypes=([Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.Api20240501Preview.IProjectEnvironmentTypeUpdatePropertiesUserRoleAssignments]))]
    [System.Collections.Hashtable]
    # Role Assignments created on environment backing resources.
    # This is a mapping from a user object ID to an object of role definition IDs.
    ${UserRoleAssignment},

    [Parameter()]
    [Alias('AzureRMContext', 'AzureCredential')]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Azure')]
    [System.Management.Automation.PSObject]
    # The DefaultProfile parameter is not functional.
    # Use the SubscriptionId parameter when available if executing the cmdlet against a different subscription.
    ${DefaultProfile},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        $mapping = @{
            CreateExpanded = 'Az.DevCenter.private\New-AzDevCenterAdminProjectEnvironmentType_CreateExpanded';
            CreateViaIdentityExpanded = 'Az.DevCenter.private\New-AzDevCenterAdminProjectEnvironmentType_CreateViaIdentityExpanded';
        }
        if (('CreateExpanded') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('SubscriptionId')) {
            $testPlayback = $false
            $PSBoundParameters['HttpPipelinePrepend'] | Foreach-Object { if ($_) { $testPlayback = $testPlayback -or ('Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.PipelineMock' -eq $_.Target.GetType().FullName -and 'Playback' -eq $_.Target.Mode) } }
            if ($testPlayback) {
                $PSBoundParameters['SubscriptionId'] = . (Join-Path $PSScriptRoot '..' 'utils' 'Get-SubscriptionIdTestSafe.ps1')
            } else {
                $PSBoundParameters['SubscriptionId'] = (Get-AzContext).Subscription.Id
            }
        }

        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {

        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {

        throw
    }

}
end {
    try {
        $steppablePipeline.End()

    } catch {

        throw
    }
} 
}

<#
.Synopsis
Creates or updates a project.
.Description
Creates or updates a project.
.Example
New-AzDevCenterAdminProject -Name DevProject -ResourceGroupName testRg -Location eastus -DevCenterId "/subscriptions/0ac520ee-14c0-480f-b6c9-0a90c58ffff/resourceGroups/testRg/providers/Microsoft.DevCenter/devcenters/Contoso" -MaxDevBoxesPerUser 3
.Example
$project = @{"ResourceGroupName" = "testRg"; "ProjectName" = "DevProject"; "SubscriptionId" = "0ac520ee-14c0-480f-b6c9-0a90c58ffff"}
New-AzDevCenterAdminProject -InputObject $project -Location eastus -DevCenterId "/subscriptions/0ac520ee-14c0-480f-b6c9-0a90c58ffff/resourceGroups/testRg/providers/Microsoft.DevCenter/devcenters/Contoso" -MaxDevBoxesPerUser 3
 
.Inputs
Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.IDevCenterIdentity
.Outputs
Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.Api20240501Preview.IProject
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
INPUTOBJECT <IDevCenterIdentity>: Identity Parameter
  [AttachedNetworkConnectionName <String>]: The name of the attached NetworkConnection.
  [CatalogName <String>]: The name of the Catalog.
  [DevBoxDefinitionName <String>]: The name of the Dev Box definition.
  [DevCenterName <String>]: The name of the devcenter.
  [EncryptionSetName <String>]: The name of the devcenter encryption set.
  [EnvironmentDefinitionName <String>]: The name of the Environment Definition.
  [EnvironmentTypeName <String>]: The name of the environment type.
  [GalleryName <String>]: The name of the gallery.
  [Id <String>]: Resource identity path
  [ImageName <String>]: The name of the image.
  [Location <String>]: The Azure region
  [MemberName <String>]: The name of a devcenter plan member.
  [NetworkConnectionName <String>]: Name of the Network Connection that can be applied to a Pool.
  [OperationId <String>]: The ID of an ongoing async operation
  [PlanName <String>]: The name of the devcenter plan.
  [PoolName <String>]: Name of the pool.
  [ProjectName <String>]: The name of the project.
  [ResourceGroupName <String>]: The name of the resource group. The name is case insensitive.
  [ScheduleName <String>]: The name of the schedule that uniquely identifies it.
  [SubscriptionId <String>]: The ID of the target subscription.
  [TaskName <String>]: The name of the Task.
  [VersionName <String>]: The version of the image.
.Link
https://learn.microsoft.com/powershell/module/az.devcenter/new-azdevcenteradminproject
#>

function New-AzDevCenterAdminProject {
[OutputType([Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.Api20240501Preview.IProject])]
[CmdletBinding(DefaultParameterSetName='CreateExpanded', PositionalBinding=$false, SupportsShouldProcess, ConfirmImpact='Medium')]
param(
    [Parameter(ParameterSetName='CreateExpanded', Mandatory)]
    [Alias('ProjectName')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [System.String]
    # The name of the project.
    ${Name},

    [Parameter(ParameterSetName='CreateExpanded', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [System.String]
    # The name of the resource group.
    # The name is case insensitive.
    ${ResourceGroupName},

    [Parameter(ParameterSetName='CreateExpanded')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.DefaultInfo(Script='(Get-AzContext).Subscription.Id')]
    [System.String]
    # The ID of the target subscription.
    ${SubscriptionId},

    [Parameter(ParameterSetName='CreateViaIdentityExpanded', Mandatory, ValueFromPipeline)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.IDevCenterIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter(Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [System.String]
    # The geo-location where the resource lives
    ${Location},

    [Parameter()]
    [AllowEmptyCollection()]
    [ArgumentCompleter([Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Support.CatalogItemType])]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Support.CatalogItemType[]]
    # Indicates catalog item types that can be synced.
    ${CatalogSettingCatalogItemSyncType},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [System.String]
    # Description of the project.
    ${Description},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [System.String]
    # Resource Id of an associated DevCenter
    ${DevCenterId},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [System.String]
    # The display name of the project.
    ${DisplayName},

    [Parameter()]
    [ArgumentCompleter([Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Support.ManagedServiceIdentityType])]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Support.ManagedServiceIdentityType]
    # Type of managed service identity (where both SystemAssigned and UserAssigned types are allowed).
    ${IdentityType},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.Info(PossibleTypes=([Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.Api40.IUserAssignedIdentities]))]
    [System.Collections.Hashtable]
    # The set of user assigned identities associated with the resource.
    # The userAssignedIdentities dictionary keys will be ARM resource ids in the form: '/subscriptions/{subscriptionId}/resourceGroups/{resourceGroupName}/providers/Microsoft.ManagedIdentity/userAssignedIdentities/{identityName}.
    # The dictionary values can be empty objects ({}) in requests.
    ${IdentityUserAssignedIdentity},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [System.Int32]
    # When specified, limits the maximum number of Dev Boxes a single user can create across all pools in the project.
    # This will have no effect on existing Dev Boxes when reduced.
    ${MaxDevBoxesPerUser},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.Info(PossibleTypes=([Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.Api40.ITrackedResourceTags]))]
    [System.Collections.Hashtable]
    # Resource tags.
    ${Tag},

    [Parameter()]
    [Alias('AzureRMContext', 'AzureCredential')]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Azure')]
    [System.Management.Automation.PSObject]
    # The DefaultProfile parameter is not functional.
    # Use the SubscriptionId parameter when available if executing the cmdlet against a different subscription.
    ${DefaultProfile},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Run the command as a job
    ${AsJob},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Run the command asynchronously
    ${NoWait},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        $mapping = @{
            CreateExpanded = 'Az.DevCenter.private\New-AzDevCenterAdminProject_CreateExpanded';
            CreateViaIdentityExpanded = 'Az.DevCenter.private\New-AzDevCenterAdminProject_CreateViaIdentityExpanded';
        }
        if (('CreateExpanded') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('SubscriptionId')) {
            $testPlayback = $false
            $PSBoundParameters['HttpPipelinePrepend'] | Foreach-Object { if ($_) { $testPlayback = $testPlayback -or ('Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.PipelineMock' -eq $_.Target.GetType().FullName -and 'Playback' -eq $_.Target.Mode) } }
            if ($testPlayback) {
                $PSBoundParameters['SubscriptionId'] = . (Join-Path $PSScriptRoot '..' 'utils' 'Get-SubscriptionIdTestSafe.ps1')
            } else {
                $PSBoundParameters['SubscriptionId'] = (Get-AzContext).Subscription.Id
            }
        }

        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {

        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {

        throw
    }

}
end {
    try {
        $steppablePipeline.End()

    } catch {

        throw
    }
} 
}

<#
.Synopsis
Creates or updates a Schedule.
.Description
Creates or updates a Schedule.
.Example
New-AzDevCenterAdminSchedule -PoolName DevPool -ProjectName DevProject -ResourceGroupName testRg -State "Enabled" -Time "18:30" -TimeZone "America/Los_Angeles"
.Example
$schedule = @{"ResourceGroupName" = "testRg"; "ProjectName" = "DevProject"; "PoolName" = "DevPool"; "SubscriptionId" = "0ac520ee-14c0-480f-b6c9-0a90c58ffff"}
New-AzDevCenterAdminSchedule -InputObject $schedule
 
.Inputs
Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.IDevCenterIdentity
.Outputs
Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.Api20240501Preview.ISchedule
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
INPUTOBJECT <IDevCenterIdentity>: Identity Parameter
  [AttachedNetworkConnectionName <String>]: The name of the attached NetworkConnection.
  [CatalogName <String>]: The name of the Catalog.
  [DevBoxDefinitionName <String>]: The name of the Dev Box definition.
  [DevCenterName <String>]: The name of the devcenter.
  [EncryptionSetName <String>]: The name of the devcenter encryption set.
  [EnvironmentDefinitionName <String>]: The name of the Environment Definition.
  [EnvironmentTypeName <String>]: The name of the environment type.
  [GalleryName <String>]: The name of the gallery.
  [Id <String>]: Resource identity path
  [ImageName <String>]: The name of the image.
  [Location <String>]: The Azure region
  [MemberName <String>]: The name of a devcenter plan member.
  [NetworkConnectionName <String>]: Name of the Network Connection that can be applied to a Pool.
  [OperationId <String>]: The ID of an ongoing async operation
  [PlanName <String>]: The name of the devcenter plan.
  [PoolName <String>]: Name of the pool.
  [ProjectName <String>]: The name of the project.
  [ResourceGroupName <String>]: The name of the resource group. The name is case insensitive.
  [ScheduleName <String>]: The name of the schedule that uniquely identifies it.
  [SubscriptionId <String>]: The ID of the target subscription.
  [TaskName <String>]: The name of the Task.
  [VersionName <String>]: The version of the image.
.Link
https://learn.microsoft.com/powershell/module/az.devcenter/new-azdevcenteradminschedule
#>

function New-AzDevCenterAdminSchedule {
[OutputType([Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.Api20240501Preview.ISchedule])]
[CmdletBinding(DefaultParameterSetName='CreateExpanded', PositionalBinding=$false, SupportsShouldProcess, ConfirmImpact='Medium')]
param(
    [Parameter(ParameterSetName='CreateExpanded', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [System.String]
    # Name of the pool.
    ${PoolName},

    [Parameter(ParameterSetName='CreateExpanded', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [System.String]
    # The name of the project.
    ${ProjectName},

    [Parameter(ParameterSetName='CreateExpanded', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [System.String]
    # The name of the resource group.
    # The name is case insensitive.
    ${ResourceGroupName},

    [Parameter(ParameterSetName='CreateExpanded')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.DefaultInfo(Script='(Get-AzContext).Subscription.Id')]
    [System.String]
    # The ID of the target subscription.
    ${SubscriptionId},

    [Parameter(ParameterSetName='CreateViaIdentityExpanded', Mandatory, ValueFromPipeline)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.IDevCenterIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [System.String]
    # The geo-location where the resource lives
    ${Location},

    [Parameter()]
    [ArgumentCompleter([Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Support.ScheduleEnableStatus])]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Support.ScheduleEnableStatus]
    # Indicates whether or not this scheduled task is enabled.
    ${State},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.Info(PossibleTypes=([Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.Api20240501Preview.ITags]))]
    [System.Collections.Hashtable]
    # Resource tags.
    ${Tag},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [System.String]
    # The target time to trigger the action.
    # The format is HH:MM.
    ${Time},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [System.String]
    # The IANA timezone id at which the schedule should execute.
    ${TimeZone},

    [Parameter()]
    [Alias('AzureRMContext', 'AzureCredential')]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Azure')]
    [System.Management.Automation.PSObject]
    # The DefaultProfile parameter is not functional.
    # Use the SubscriptionId parameter when available if executing the cmdlet against a different subscription.
    ${DefaultProfile},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Run the command as a job
    ${AsJob},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Run the command asynchronously
    ${NoWait},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        $mapping = @{
            CreateExpanded = 'Az.DevCenter.private\New-AzDevCenterAdminSchedule_CreateExpanded';
            CreateViaIdentityExpanded = 'Az.DevCenter.private\New-AzDevCenterAdminSchedule_CreateViaIdentityExpanded';
        }
        if (('CreateExpanded') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('Name')) {
            $PSBoundParameters['Name'] = "default"
        }
        if (('CreateExpanded') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('SubscriptionId')) {
            $testPlayback = $false
            $PSBoundParameters['HttpPipelinePrepend'] | Foreach-Object { if ($_) { $testPlayback = $testPlayback -or ('Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.PipelineMock' -eq $_.Target.GetType().FullName -and 'Playback' -eq $_.Target.Mode) } }
            if ($testPlayback) {
                $PSBoundParameters['SubscriptionId'] = . (Join-Path $PSScriptRoot '..' 'utils' 'Get-SubscriptionIdTestSafe.ps1')
            } else {
                $PSBoundParameters['SubscriptionId'] = (Get-AzContext).Subscription.Id
            }
        }
        if (('CreateExpanded', 'CreateViaIdentityExpanded') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('Frequency')) {
            $PSBoundParameters['Frequency'] = "Daily"
        }
        if (('CreateExpanded', 'CreateViaIdentityExpanded') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('PropertiesType')) {
            $PSBoundParameters['PropertiesType'] = "StopDevBox"
        }

        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {

        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {

        throw
    }

}
end {
    try {
        $steppablePipeline.End()

    } catch {

        throw
    }
} 
}

<#
.Synopsis
Deletes a devcenter encryption set
.Description
Deletes a devcenter encryption set
.Example
{{ Add code here }}
.Example
{{ Add code here }}
 
.Inputs
Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.IDevCenterIdentity
.Outputs
System.Boolean
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
INPUTOBJECT <IDevCenterIdentity>: Identity Parameter
  [AttachedNetworkConnectionName <String>]: The name of the attached NetworkConnection.
  [CatalogName <String>]: The name of the Catalog.
  [DevBoxDefinitionName <String>]: The name of the Dev Box definition.
  [DevCenterName <String>]: The name of the devcenter.
  [EncryptionSetName <String>]: The name of the devcenter encryption set.
  [EnvironmentDefinitionName <String>]: The name of the Environment Definition.
  [EnvironmentTypeName <String>]: The name of the environment type.
  [GalleryName <String>]: The name of the gallery.
  [Id <String>]: Resource identity path
  [ImageName <String>]: The name of the image.
  [Location <String>]: The Azure region
  [MemberName <String>]: The name of a devcenter plan member.
  [NetworkConnectionName <String>]: Name of the Network Connection that can be applied to a Pool.
  [OperationId <String>]: The ID of an ongoing async operation
  [PlanName <String>]: The name of the devcenter plan.
  [PoolName <String>]: Name of the pool.
  [ProjectName <String>]: The name of the project.
  [ResourceGroupName <String>]: The name of the resource group. The name is case insensitive.
  [ScheduleName <String>]: The name of the schedule that uniquely identifies it.
  [SubscriptionId <String>]: The ID of the target subscription.
  [TaskName <String>]: The name of the Task.
  [VersionName <String>]: The version of the image.
.Link
https://learn.microsoft.com/powershell/module/az.devcenter/remove-azdevcenteradminencryptionset
#>

function Remove-AzDevCenterAdminEncryptionSet {
[OutputType([System.Boolean])]
[CmdletBinding(DefaultParameterSetName='Delete', PositionalBinding=$false, SupportsShouldProcess, ConfirmImpact='Medium')]
param(
    [Parameter(ParameterSetName='Delete', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [System.String]
    # The name of the devcenter.
    ${DevCenterName},

    [Parameter(ParameterSetName='Delete', Mandatory)]
    [Alias('EncryptionSetName')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [System.String]
    # The name of the devcenter encryption set.
    ${Name},

    [Parameter(ParameterSetName='Delete', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [System.String]
    # The name of the resource group.
    # The name is case insensitive.
    ${ResourceGroupName},

    [Parameter(ParameterSetName='Delete')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.DefaultInfo(Script='(Get-AzContext).Subscription.Id')]
    [System.String]
    # The ID of the target subscription.
    ${SubscriptionId},

    [Parameter(ParameterSetName='DeleteViaIdentity', Mandatory, ValueFromPipeline)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.IDevCenterIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter()]
    [Alias('AzureRMContext', 'AzureCredential')]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Azure')]
    [System.Management.Automation.PSObject]
    # The DefaultProfile parameter is not functional.
    # Use the SubscriptionId parameter when available if executing the cmdlet against a different subscription.
    ${DefaultProfile},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Run the command as a job
    ${AsJob},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Run the command asynchronously
    ${NoWait},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Returns true when the command succeeds
    ${PassThru},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        $mapping = @{
            Delete = 'Az.DevCenter.private\Remove-AzDevCenterAdminEncryptionSet_Delete';
            DeleteViaIdentity = 'Az.DevCenter.private\Remove-AzDevCenterAdminEncryptionSet_DeleteViaIdentity';
        }
        if (('Delete') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('SubscriptionId')) {
            $testPlayback = $false
            $PSBoundParameters['HttpPipelinePrepend'] | Foreach-Object { if ($_) { $testPlayback = $testPlayback -or ('Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.PipelineMock' -eq $_.Target.GetType().FullName -and 'Playback' -eq $_.Target.Mode) } }
            if ($testPlayback) {
                $PSBoundParameters['SubscriptionId'] = . (Join-Path $PSScriptRoot '..' 'utils' 'Get-SubscriptionIdTestSafe.ps1')
            } else {
                $PSBoundParameters['SubscriptionId'] = (Get-AzContext).Subscription.Id
            }
        }

        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {

        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {

        throw
    }

}
end {
    try {
        $steppablePipeline.End()

    } catch {

        throw
    }
} 
}

<#
.Synopsis
Deletes a Scheduled.
.Description
Deletes a Scheduled.
.Example
Remove-AzDevCenterAdminSchedule -PoolName DevPool -ProjectName DevProject -ResourceGroupName testRg
.Example
$schedule = Get-AzDevCenterAdminSchedule -PoolName DevPool -ProjectName DevProject -ResourceGroupName testRg
Remove-AzDevCenterAdminSchedule -InputObject $schedule
 
.Inputs
Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.IDevCenterIdentity
.Outputs
System.Boolean
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
INPUTOBJECT <IDevCenterIdentity>: Identity Parameter
  [AttachedNetworkConnectionName <String>]: The name of the attached NetworkConnection.
  [CatalogName <String>]: The name of the Catalog.
  [DevBoxDefinitionName <String>]: The name of the Dev Box definition.
  [DevCenterName <String>]: The name of the devcenter.
  [EncryptionSetName <String>]: The name of the devcenter encryption set.
  [EnvironmentDefinitionName <String>]: The name of the Environment Definition.
  [EnvironmentTypeName <String>]: The name of the environment type.
  [GalleryName <String>]: The name of the gallery.
  [Id <String>]: Resource identity path
  [ImageName <String>]: The name of the image.
  [Location <String>]: The Azure region
  [MemberName <String>]: The name of a devcenter plan member.
  [NetworkConnectionName <String>]: Name of the Network Connection that can be applied to a Pool.
  [OperationId <String>]: The ID of an ongoing async operation
  [PlanName <String>]: The name of the devcenter plan.
  [PoolName <String>]: Name of the pool.
  [ProjectName <String>]: The name of the project.
  [ResourceGroupName <String>]: The name of the resource group. The name is case insensitive.
  [ScheduleName <String>]: The name of the schedule that uniquely identifies it.
  [SubscriptionId <String>]: The ID of the target subscription.
  [TaskName <String>]: The name of the Task.
  [VersionName <String>]: The version of the image.
.Link
https://learn.microsoft.com/powershell/module/az.devcenter/remove-azdevcenteradminschedule
#>

function Remove-AzDevCenterAdminSchedule {
[OutputType([System.Boolean])]
[CmdletBinding(DefaultParameterSetName='Delete', PositionalBinding=$false, SupportsShouldProcess, ConfirmImpact='Medium')]
param(
    [Parameter(ParameterSetName='Delete', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [System.String]
    # Name of the pool.
    ${PoolName},

    [Parameter(ParameterSetName='Delete', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [System.String]
    # The name of the project.
    ${ProjectName},

    [Parameter(ParameterSetName='Delete', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [System.String]
    # The name of the resource group.
    # The name is case insensitive.
    ${ResourceGroupName},

    [Parameter(ParameterSetName='Delete')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.DefaultInfo(Script='(Get-AzContext).Subscription.Id')]
    [System.String]
    # The ID of the target subscription.
    ${SubscriptionId},

    [Parameter(ParameterSetName='DeleteViaIdentity', Mandatory, ValueFromPipeline)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.IDevCenterIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter()]
    [Alias('AzureRMContext', 'AzureCredential')]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Azure')]
    [System.Management.Automation.PSObject]
    # The DefaultProfile parameter is not functional.
    # Use the SubscriptionId parameter when available if executing the cmdlet against a different subscription.
    ${DefaultProfile},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Run the command as a job
    ${AsJob},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Run the command asynchronously
    ${NoWait},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Returns true when the command succeeds
    ${PassThru},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        $mapping = @{
            Delete = 'Az.DevCenter.private\Remove-AzDevCenterAdminSchedule_Delete';
            DeleteViaIdentity = 'Az.DevCenter.private\Remove-AzDevCenterAdminSchedule_DeleteViaIdentity';
        }
        if (('Delete') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('Name')) {
            $PSBoundParameters['Name'] = "default"
        }
        if (('Delete') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('SubscriptionId')) {
            $testPlayback = $false
            $PSBoundParameters['HttpPipelinePrepend'] | Foreach-Object { if ($_) { $testPlayback = $testPlayback -or ('Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.PipelineMock' -eq $_.Target.GetType().FullName -and 'Playback' -eq $_.Target.Mode) } }
            if ($testPlayback) {
                $PSBoundParameters['SubscriptionId'] = . (Join-Path $PSScriptRoot '..' 'utils' 'Get-SubscriptionIdTestSafe.ps1')
            } else {
                $PSBoundParameters['SubscriptionId'] = (Get-AzContext).Subscription.Id
            }
        }

        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {

        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {

        throw
    }

}
end {
    try {
        $steppablePipeline.End()

    } catch {

        throw
    }
} 
}

<#
.Synopsis
Partially updates a devcenter encryption set.
.Description
Partially updates a devcenter encryption set.
.Example
{{ Add code here }}
.Example
{{ Add code here }}
 
.Inputs
Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.IDevCenterIdentity
.Outputs
Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.Api20240501Preview.IDevCenterEncryptionSet
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
INPUTOBJECT <IDevCenterIdentity>: Identity Parameter
  [AttachedNetworkConnectionName <String>]: The name of the attached NetworkConnection.
  [CatalogName <String>]: The name of the Catalog.
  [DevBoxDefinitionName <String>]: The name of the Dev Box definition.
  [DevCenterName <String>]: The name of the devcenter.
  [EncryptionSetName <String>]: The name of the devcenter encryption set.
  [EnvironmentDefinitionName <String>]: The name of the Environment Definition.
  [EnvironmentTypeName <String>]: The name of the environment type.
  [GalleryName <String>]: The name of the gallery.
  [Id <String>]: Resource identity path
  [ImageName <String>]: The name of the image.
  [Location <String>]: The Azure region
  [MemberName <String>]: The name of a devcenter plan member.
  [NetworkConnectionName <String>]: Name of the Network Connection that can be applied to a Pool.
  [OperationId <String>]: The ID of an ongoing async operation
  [PlanName <String>]: The name of the devcenter plan.
  [PoolName <String>]: Name of the pool.
  [ProjectName <String>]: The name of the project.
  [ResourceGroupName <String>]: The name of the resource group. The name is case insensitive.
  [ScheduleName <String>]: The name of the schedule that uniquely identifies it.
  [SubscriptionId <String>]: The ID of the target subscription.
  [TaskName <String>]: The name of the Task.
  [VersionName <String>]: The version of the image.
.Link
https://learn.microsoft.com/powershell/module/az.devcenter/update-azdevcenteradminencryptionset
#>

function Update-AzDevCenterAdminEncryptionSet {
[OutputType([Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.Api20240501Preview.IDevCenterEncryptionSet])]
[CmdletBinding(DefaultParameterSetName='UpdateExpanded', PositionalBinding=$false, SupportsShouldProcess, ConfirmImpact='Medium')]
param(
    [Parameter(ParameterSetName='UpdateExpanded', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [System.String]
    # The name of the devcenter.
    ${DevCenterName},

    [Parameter(ParameterSetName='UpdateExpanded', Mandatory)]
    [Alias('EncryptionSetName')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [System.String]
    # The name of the devcenter encryption set.
    ${Name},

    [Parameter(ParameterSetName='UpdateExpanded', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [System.String]
    # The name of the resource group.
    # The name is case insensitive.
    ${ResourceGroupName},

    [Parameter(ParameterSetName='UpdateExpanded')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.DefaultInfo(Script='(Get-AzContext).Subscription.Id')]
    [System.String]
    # The ID of the target subscription.
    ${SubscriptionId},

    [Parameter(ParameterSetName='UpdateViaIdentityExpanded', Mandatory, ValueFromPipeline)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.IDevCenterIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter()]
    [ArgumentCompleter([Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Support.DevboxDisksEncryptionEnableStatus])]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Support.DevboxDisksEncryptionEnableStatus]
    # Devbox disk encryption enable or disable status.
    # Indicates if Devbox disks encryption using DevCenter CMK is enabled or not.
    ${DevboxDisksEncryptionEnableStatus},

    [Parameter()]
    [ArgumentCompleter([Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Support.ManagedServiceIdentityType])]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Support.ManagedServiceIdentityType]
    # Type of managed service identity (where both SystemAssigned and UserAssigned types are allowed).
    ${IdentityType},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.Info(PossibleTypes=([Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.Api40.IUserAssignedIdentities]))]
    [System.Collections.Hashtable]
    # The set of user assigned identities associated with the resource.
    # The userAssignedIdentities dictionary keys will be ARM resource ids in the form: '/subscriptions/{subscriptionId}/resourceGroups/{resourceGroupName}/providers/Microsoft.ManagedIdentity/userAssignedIdentities/{identityName}.
    # The dictionary values can be empty objects ({}) in requests.
    ${IdentityUserAssignedIdentity},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [System.String]
    # Key encryption key Url, versioned or non-versioned.
    # Ex: https://contosovault.vault.azure.net/keys/contosokek/562a4bb76b524a1493a6afe8e536ee78 or https://contosovault.vault.azure.net/keys/contosokek.
    ${KeyEncryptionKeyUrl},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.Info(PossibleTypes=([Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.Api20240501Preview.ITags]))]
    [System.Collections.Hashtable]
    # Resource tags.
    ${Tag},

    [Parameter()]
    [Alias('AzureRMContext', 'AzureCredential')]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Azure')]
    [System.Management.Automation.PSObject]
    # The DefaultProfile parameter is not functional.
    # Use the SubscriptionId parameter when available if executing the cmdlet against a different subscription.
    ${DefaultProfile},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Run the command as a job
    ${AsJob},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Run the command asynchronously
    ${NoWait},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        $mapping = @{
            UpdateExpanded = 'Az.DevCenter.private\Update-AzDevCenterAdminEncryptionSet_UpdateExpanded';
            UpdateViaIdentityExpanded = 'Az.DevCenter.private\Update-AzDevCenterAdminEncryptionSet_UpdateViaIdentityExpanded';
        }
        if (('UpdateExpanded') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('SubscriptionId')) {
            $testPlayback = $false
            $PSBoundParameters['HttpPipelinePrepend'] | Foreach-Object { if ($_) { $testPlayback = $testPlayback -or ('Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.PipelineMock' -eq $_.Target.GetType().FullName -and 'Playback' -eq $_.Target.Mode) } }
            if ($testPlayback) {
                $PSBoundParameters['SubscriptionId'] = . (Join-Path $PSScriptRoot '..' 'utils' 'Get-SubscriptionIdTestSafe.ps1')
            } else {
                $PSBoundParameters['SubscriptionId'] = (Get-AzContext).Subscription.Id
            }
        }

        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {

        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {

        throw
    }

}
end {
    try {
        $steppablePipeline.End()

    } catch {

        throw
    }
} 
}

<#
.Synopsis
Partially updates a Scheduled.
.Description
Partially updates a Scheduled.
.Example
New-AzDevCenterAdminSchedule -PoolName DevPool -ProjectName DevProject -ResourceGroupName testRg -State "Disabled" -Time "17:30" -TimeZone "America/New_York"
.Example
$scheduleInput = Get-AzDevCenterAdminSchedule -PoolName DevPool -ProjectName DevProject -ResourceGroupName testRg
 
New-AzDevCenterAdminSchedule -InputObject $scheduleInput -State "Disabled" -Time "17:30" -TimeZone "America/New_York"
 
.Inputs
Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.IDevCenterIdentity
.Outputs
Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.Api20240501Preview.ISchedule
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
INPUTOBJECT <IDevCenterIdentity>: Identity Parameter
  [AttachedNetworkConnectionName <String>]: The name of the attached NetworkConnection.
  [CatalogName <String>]: The name of the Catalog.
  [DevBoxDefinitionName <String>]: The name of the Dev Box definition.
  [DevCenterName <String>]: The name of the devcenter.
  [EncryptionSetName <String>]: The name of the devcenter encryption set.
  [EnvironmentDefinitionName <String>]: The name of the Environment Definition.
  [EnvironmentTypeName <String>]: The name of the environment type.
  [GalleryName <String>]: The name of the gallery.
  [Id <String>]: Resource identity path
  [ImageName <String>]: The name of the image.
  [Location <String>]: The Azure region
  [MemberName <String>]: The name of a devcenter plan member.
  [NetworkConnectionName <String>]: Name of the Network Connection that can be applied to a Pool.
  [OperationId <String>]: The ID of an ongoing async operation
  [PlanName <String>]: The name of the devcenter plan.
  [PoolName <String>]: Name of the pool.
  [ProjectName <String>]: The name of the project.
  [ResourceGroupName <String>]: The name of the resource group. The name is case insensitive.
  [ScheduleName <String>]: The name of the schedule that uniquely identifies it.
  [SubscriptionId <String>]: The ID of the target subscription.
  [TaskName <String>]: The name of the Task.
  [VersionName <String>]: The version of the image.
.Link
https://learn.microsoft.com/powershell/module/az.devcenter/update-azdevcenteradminschedule
#>

function Update-AzDevCenterAdminSchedule {
[OutputType([Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.Api20240501Preview.ISchedule])]
[CmdletBinding(DefaultParameterSetName='UpdateExpanded', PositionalBinding=$false, SupportsShouldProcess, ConfirmImpact='Medium')]
param(
    [Parameter(ParameterSetName='UpdateExpanded', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [System.String]
    # Name of the pool.
    ${PoolName},

    [Parameter(ParameterSetName='UpdateExpanded', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [System.String]
    # The name of the project.
    ${ProjectName},

    [Parameter(ParameterSetName='UpdateExpanded', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [System.String]
    # The name of the resource group.
    # The name is case insensitive.
    ${ResourceGroupName},

    [Parameter(ParameterSetName='UpdateExpanded')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.DefaultInfo(Script='(Get-AzContext).Subscription.Id')]
    [System.String]
    # The ID of the target subscription.
    ${SubscriptionId},

    [Parameter(ParameterSetName='UpdateViaIdentityExpanded', Mandatory, ValueFromPipeline)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.IDevCenterIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter()]
    [ArgumentCompleter([Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Support.ScheduleEnableStatus])]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Support.ScheduleEnableStatus]
    # Indicates whether or not this scheduled task is enabled.
    ${State},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.Info(PossibleTypes=([Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.Api20240501Preview.ITags]))]
    [System.Collections.Hashtable]
    # Resource tags.
    ${Tag},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [System.String]
    # The target time to trigger the action.
    # The format is HH:MM.
    ${Time},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [System.String]
    # The IANA timezone id at which the schedule should execute.
    ${TimeZone},

    [Parameter()]
    [ArgumentCompleter([Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Support.ScheduledType])]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Support.ScheduledType]
    # Supported type this scheduled task represents.
    ${Type},

    [Parameter()]
    [Alias('AzureRMContext', 'AzureCredential')]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Azure')]
    [System.Management.Automation.PSObject]
    # The DefaultProfile parameter is not functional.
    # Use the SubscriptionId parameter when available if executing the cmdlet against a different subscription.
    ${DefaultProfile},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Run the command as a job
    ${AsJob},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Run the command asynchronously
    ${NoWait},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        $mapping = @{
            UpdateExpanded = 'Az.DevCenter.private\Update-AzDevCenterAdminSchedule_UpdateExpanded';
            UpdateViaIdentityExpanded = 'Az.DevCenter.private\Update-AzDevCenterAdminSchedule_UpdateViaIdentityExpanded';
        }
        if (('UpdateExpanded') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('Name')) {
            $PSBoundParameters['Name'] = "default"
        }
        if (('UpdateExpanded') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('SubscriptionId')) {
            $testPlayback = $false
            $PSBoundParameters['HttpPipelinePrepend'] | Foreach-Object { if ($_) { $testPlayback = $testPlayback -or ('Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.PipelineMock' -eq $_.Target.GetType().FullName -and 'Playback' -eq $_.Target.Mode) } }
            if ($testPlayback) {
                $PSBoundParameters['SubscriptionId'] = . (Join-Path $PSScriptRoot '..' 'utils' 'Get-SubscriptionIdTestSafe.ps1')
            } else {
                $PSBoundParameters['SubscriptionId'] = (Get-AzContext).Subscription.Id
            }
        }
        if (('UpdateExpanded', 'UpdateViaIdentityExpanded') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('Frequency')) {
            $PSBoundParameters['Frequency'] = "Daily"
        }

        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {

        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {

        throw
    }

}
end {
    try {
        $steppablePipeline.End()

    } catch {

        throw
    }
} 
}

# SIG # Begin signature block
# MIIoKQYJKoZIhvcNAQcCoIIoGjCCKBYCAQExDzANBglghkgBZQMEAgEFADB5Bgor
# BgEEAYI3AgEEoGswaTA0BgorBgEEAYI3AgEeMCYCAwEAAAQQH8w7YFlLCE63JNLG
# KX7zUQIBAAIBAAIBAAIBAAIBADAxMA0GCWCGSAFlAwQCAQUABCCi7C/1gCn6rhBU
# 6kRH8OoUGiiytNe6egt9kVTzDmp+fKCCDXYwggX0MIID3KADAgECAhMzAAAEBGx0
# Bv9XKydyAAAAAAQEMA0GCSqGSIb3DQEBCwUAMH4xCzAJBgNVBAYTAlVTMRMwEQYD
# VQQIEwpXYXNoaW5ndG9uMRAwDgYDVQQHEwdSZWRtb25kMR4wHAYDVQQKExVNaWNy
# b3NvZnQgQ29ycG9yYXRpb24xKDAmBgNVBAMTH01pY3Jvc29mdCBDb2RlIFNpZ25p
# bmcgUENBIDIwMTEwHhcNMjQwOTEyMjAxMTE0WhcNMjUwOTExMjAxMTE0WjB0MQsw
# CQYDVQQGEwJVUzETMBEGA1UECBMKV2FzaGluZ3RvbjEQMA4GA1UEBxMHUmVkbW9u
# ZDEeMBwGA1UEChMVTWljcm9zb2Z0IENvcnBvcmF0aW9uMR4wHAYDVQQDExVNaWNy
# b3NvZnQgQ29ycG9yYXRpb24wggEiMA0GCSqGSIb3DQEBAQUAA4IBDwAwggEKAoIB
# AQC0KDfaY50MDqsEGdlIzDHBd6CqIMRQWW9Af1LHDDTuFjfDsvna0nEuDSYJmNyz
# NB10jpbg0lhvkT1AzfX2TLITSXwS8D+mBzGCWMM/wTpciWBV/pbjSazbzoKvRrNo
# DV/u9omOM2Eawyo5JJJdNkM2d8qzkQ0bRuRd4HarmGunSouyb9NY7egWN5E5lUc3
# a2AROzAdHdYpObpCOdeAY2P5XqtJkk79aROpzw16wCjdSn8qMzCBzR7rvH2WVkvF
# HLIxZQET1yhPb6lRmpgBQNnzidHV2Ocxjc8wNiIDzgbDkmlx54QPfw7RwQi8p1fy
# 4byhBrTjv568x8NGv3gwb0RbAgMBAAGjggFzMIIBbzAfBgNVHSUEGDAWBgorBgEE
# AYI3TAgBBggrBgEFBQcDAzAdBgNVHQ4EFgQU8huhNbETDU+ZWllL4DNMPCijEU4w
# RQYDVR0RBD4wPKQ6MDgxHjAcBgNVBAsTFU1pY3Jvc29mdCBDb3Jwb3JhdGlvbjEW
# MBQGA1UEBRMNMjMwMDEyKzUwMjkyMzAfBgNVHSMEGDAWgBRIbmTlUAXTgqoXNzci
# tW2oynUClTBUBgNVHR8ETTBLMEmgR6BFhkNodHRwOi8vd3d3Lm1pY3Jvc29mdC5j
# b20vcGtpb3BzL2NybC9NaWNDb2RTaWdQQ0EyMDExXzIwMTEtMDctMDguY3JsMGEG
# CCsGAQUFBwEBBFUwUzBRBggrBgEFBQcwAoZFaHR0cDovL3d3dy5taWNyb3NvZnQu
# Y29tL3BraW9wcy9jZXJ0cy9NaWNDb2RTaWdQQ0EyMDExXzIwMTEtMDctMDguY3J0
# MAwGA1UdEwEB/wQCMAAwDQYJKoZIhvcNAQELBQADggIBAIjmD9IpQVvfB1QehvpC
# Ge7QeTQkKQ7j3bmDMjwSqFL4ri6ae9IFTdpywn5smmtSIyKYDn3/nHtaEn0X1NBj
# L5oP0BjAy1sqxD+uy35B+V8wv5GrxhMDJP8l2QjLtH/UglSTIhLqyt8bUAqVfyfp
# h4COMRvwwjTvChtCnUXXACuCXYHWalOoc0OU2oGN+mPJIJJxaNQc1sjBsMbGIWv3
# cmgSHkCEmrMv7yaidpePt6V+yPMik+eXw3IfZ5eNOiNgL1rZzgSJfTnvUqiaEQ0X
# dG1HbkDv9fv6CTq6m4Ty3IzLiwGSXYxRIXTxT4TYs5VxHy2uFjFXWVSL0J2ARTYL
# E4Oyl1wXDF1PX4bxg1yDMfKPHcE1Ijic5lx1KdK1SkaEJdto4hd++05J9Bf9TAmi
# u6EK6C9Oe5vRadroJCK26uCUI4zIjL/qG7mswW+qT0CW0gnR9JHkXCWNbo8ccMk1
# sJatmRoSAifbgzaYbUz8+lv+IXy5GFuAmLnNbGjacB3IMGpa+lbFgih57/fIhamq
# 5VhxgaEmn/UjWyr+cPiAFWuTVIpfsOjbEAww75wURNM1Imp9NJKye1O24EspEHmb
# DmqCUcq7NqkOKIG4PVm3hDDED/WQpzJDkvu4FrIbvyTGVU01vKsg4UfcdiZ0fQ+/
# V0hf8yrtq9CkB8iIuk5bBxuPMIIHejCCBWKgAwIBAgIKYQ6Q0gAAAAAAAzANBgkq
# hkiG9w0BAQsFADCBiDELMAkGA1UEBhMCVVMxEzARBgNVBAgTCldhc2hpbmd0b24x
# EDAOBgNVBAcTB1JlZG1vbmQxHjAcBgNVBAoTFU1pY3Jvc29mdCBDb3Jwb3JhdGlv
# bjEyMDAGA1UEAxMpTWljcm9zb2Z0IFJvb3QgQ2VydGlmaWNhdGUgQXV0aG9yaXR5
# IDIwMTEwHhcNMTEwNzA4MjA1OTA5WhcNMjYwNzA4MjEwOTA5WjB+MQswCQYDVQQG
# EwJVUzETMBEGA1UECBMKV2FzaGluZ3RvbjEQMA4GA1UEBxMHUmVkbW9uZDEeMBwG
# A1UEChMVTWljcm9zb2Z0IENvcnBvcmF0aW9uMSgwJgYDVQQDEx9NaWNyb3NvZnQg
# Q29kZSBTaWduaW5nIFBDQSAyMDExMIICIjANBgkqhkiG9w0BAQEFAAOCAg8AMIIC
# CgKCAgEAq/D6chAcLq3YbqqCEE00uvK2WCGfQhsqa+laUKq4BjgaBEm6f8MMHt03
# a8YS2AvwOMKZBrDIOdUBFDFC04kNeWSHfpRgJGyvnkmc6Whe0t+bU7IKLMOv2akr
# rnoJr9eWWcpgGgXpZnboMlImEi/nqwhQz7NEt13YxC4Ddato88tt8zpcoRb0Rrrg
# OGSsbmQ1eKagYw8t00CT+OPeBw3VXHmlSSnnDb6gE3e+lD3v++MrWhAfTVYoonpy
# 4BI6t0le2O3tQ5GD2Xuye4Yb2T6xjF3oiU+EGvKhL1nkkDstrjNYxbc+/jLTswM9
# sbKvkjh+0p2ALPVOVpEhNSXDOW5kf1O6nA+tGSOEy/S6A4aN91/w0FK/jJSHvMAh
# dCVfGCi2zCcoOCWYOUo2z3yxkq4cI6epZuxhH2rhKEmdX4jiJV3TIUs+UsS1Vz8k
# A/DRelsv1SPjcF0PUUZ3s/gA4bysAoJf28AVs70b1FVL5zmhD+kjSbwYuER8ReTB
# w3J64HLnJN+/RpnF78IcV9uDjexNSTCnq47f7Fufr/zdsGbiwZeBe+3W7UvnSSmn
# Eyimp31ngOaKYnhfsi+E11ecXL93KCjx7W3DKI8sj0A3T8HhhUSJxAlMxdSlQy90
# lfdu+HggWCwTXWCVmj5PM4TasIgX3p5O9JawvEagbJjS4NaIjAsCAwEAAaOCAe0w
# ggHpMBAGCSsGAQQBgjcVAQQDAgEAMB0GA1UdDgQWBBRIbmTlUAXTgqoXNzcitW2o
# ynUClTAZBgkrBgEEAYI3FAIEDB4KAFMAdQBiAEMAQTALBgNVHQ8EBAMCAYYwDwYD
# VR0TAQH/BAUwAwEB/zAfBgNVHSMEGDAWgBRyLToCMZBDuRQFTuHqp8cx0SOJNDBa
# BgNVHR8EUzBRME+gTaBLhklodHRwOi8vY3JsLm1pY3Jvc29mdC5jb20vcGtpL2Ny
# bC9wcm9kdWN0cy9NaWNSb29DZXJBdXQyMDExXzIwMTFfMDNfMjIuY3JsMF4GCCsG
# AQUFBwEBBFIwUDBOBggrBgEFBQcwAoZCaHR0cDovL3d3dy5taWNyb3NvZnQuY29t
# L3BraS9jZXJ0cy9NaWNSb29DZXJBdXQyMDExXzIwMTFfMDNfMjIuY3J0MIGfBgNV
# HSAEgZcwgZQwgZEGCSsGAQQBgjcuAzCBgzA/BggrBgEFBQcCARYzaHR0cDovL3d3
# dy5taWNyb3NvZnQuY29tL3BraW9wcy9kb2NzL3ByaW1hcnljcHMuaHRtMEAGCCsG
# AQUFBwICMDQeMiAdAEwAZQBnAGEAbABfAHAAbwBsAGkAYwB5AF8AcwB0AGEAdABl
# AG0AZQBuAHQALiAdMA0GCSqGSIb3DQEBCwUAA4ICAQBn8oalmOBUeRou09h0ZyKb
# C5YR4WOSmUKWfdJ5DJDBZV8uLD74w3LRbYP+vj/oCso7v0epo/Np22O/IjWll11l
# hJB9i0ZQVdgMknzSGksc8zxCi1LQsP1r4z4HLimb5j0bpdS1HXeUOeLpZMlEPXh6
# I/MTfaaQdION9MsmAkYqwooQu6SpBQyb7Wj6aC6VoCo/KmtYSWMfCWluWpiW5IP0
# wI/zRive/DvQvTXvbiWu5a8n7dDd8w6vmSiXmE0OPQvyCInWH8MyGOLwxS3OW560
# STkKxgrCxq2u5bLZ2xWIUUVYODJxJxp/sfQn+N4sOiBpmLJZiWhub6e3dMNABQam
# ASooPoI/E01mC8CzTfXhj38cbxV9Rad25UAqZaPDXVJihsMdYzaXht/a8/jyFqGa
# J+HNpZfQ7l1jQeNbB5yHPgZ3BtEGsXUfFL5hYbXw3MYbBL7fQccOKO7eZS/sl/ah
# XJbYANahRr1Z85elCUtIEJmAH9AAKcWxm6U/RXceNcbSoqKfenoi+kiVH6v7RyOA
# 9Z74v2u3S5fi63V4GuzqN5l5GEv/1rMjaHXmr/r8i+sLgOppO6/8MO0ETI7f33Vt
# Y5E90Z1WTk+/gFcioXgRMiF670EKsT/7qMykXcGhiJtXcVZOSEXAQsmbdlsKgEhr
# /Xmfwb1tbWrJUnMTDXpQzTGCGgkwghoFAgEBMIGVMH4xCzAJBgNVBAYTAlVTMRMw
# EQYDVQQIEwpXYXNoaW5ndG9uMRAwDgYDVQQHEwdSZWRtb25kMR4wHAYDVQQKExVN
# aWNyb3NvZnQgQ29ycG9yYXRpb24xKDAmBgNVBAMTH01pY3Jvc29mdCBDb2RlIFNp
# Z25pbmcgUENBIDIwMTECEzMAAAQEbHQG/1crJ3IAAAAABAQwDQYJYIZIAWUDBAIB
# BQCgga4wGQYJKoZIhvcNAQkDMQwGCisGAQQBgjcCAQQwHAYKKwYBBAGCNwIBCzEO
# MAwGCisGAQQBgjcCARUwLwYJKoZIhvcNAQkEMSIEIEAzBl5vM1ypEdCiHvv+RCFf
# XzLFqKflVWzzd+FD8ZDmMEIGCisGAQQBgjcCAQwxNDAyoBSAEgBNAGkAYwByAG8A
# cwBvAGYAdKEagBhodHRwOi8vd3d3Lm1pY3Jvc29mdC5jb20wDQYJKoZIhvcNAQEB
# BQAEggEAJfz8NdKB9UD2NNtjYxCKLjTtCJBRCCBmuNI1zIYCSwMF0qIagN5QuD6k
# gDrf+eqCqlhjho+1dEhf5ExnKQhHJe2ZSJ1PQ5SzeUL03Nfc7jq9JuKPJKDcZa6R
# AJWys5fPdZyvIXos5NtAIzshabH8Ba5nBzQAOgy4tWqN5+S6xqT9XEp5zAzu8QNQ
# cUKbpQKiADDB+zc61bSRyQTeiwVuWJQ+cnGf1UMo7ysufQKbo1IZh+KjoDcV2ccE
# 28k54TOU6dnIKSHs9LDiWcg0Jrs/a4LNEOVdLznRNtvIsehpoqY65OR+Onytu2Uy
# X2o4ThcGc2qcc+7RLsIhumVoID6GVKGCF5MwghePBgorBgEEAYI3AwMBMYIXfzCC
# F3sGCSqGSIb3DQEHAqCCF2wwghdoAgEDMQ8wDQYJYIZIAWUDBAIBBQAwggFRBgsq
# hkiG9w0BCRABBKCCAUAEggE8MIIBOAIBAQYKKwYBBAGEWQoDATAxMA0GCWCGSAFl
# AwQCAQUABCCEDw6xUeacLnpr3JmYTtVQn91CNHCvYuEIG2WVC/sqeQIGZzXhnp3Q
# GBIyMDI0MTExNTA1NTg0MS45MlowBIACAfSggdGkgc4wgcsxCzAJBgNVBAYTAlVT
# MRMwEQYDVQQIEwpXYXNoaW5ndG9uMRAwDgYDVQQHEwdSZWRtb25kMR4wHAYDVQQK
# ExVNaWNyb3NvZnQgQ29ycG9yYXRpb24xJTAjBgNVBAsTHE1pY3Jvc29mdCBBbWVy
# aWNhIE9wZXJhdGlvbnMxJzAlBgNVBAsTHm5TaGllbGQgVFNTIEVTTjpBNDAwLTA1
# RTAtRDk0NzElMCMGA1UEAxMcTWljcm9zb2Z0IFRpbWUtU3RhbXAgU2VydmljZaCC
# EeowggcgMIIFCKADAgECAhMzAAAB7OArpILQkVKAAAEAAAHsMA0GCSqGSIb3DQEB
# CwUAMHwxCzAJBgNVBAYTAlVTMRMwEQYDVQQIEwpXYXNoaW5ndG9uMRAwDgYDVQQH
# EwdSZWRtb25kMR4wHAYDVQQKExVNaWNyb3NvZnQgQ29ycG9yYXRpb24xJjAkBgNV
# BAMTHU1pY3Jvc29mdCBUaW1lLVN0YW1wIFBDQSAyMDEwMB4XDTIzMTIwNjE4NDUz
# OFoXDTI1MDMwNTE4NDUzOFowgcsxCzAJBgNVBAYTAlVTMRMwEQYDVQQIEwpXYXNo
# aW5ndG9uMRAwDgYDVQQHEwdSZWRtb25kMR4wHAYDVQQKExVNaWNyb3NvZnQgQ29y
# cG9yYXRpb24xJTAjBgNVBAsTHE1pY3Jvc29mdCBBbWVyaWNhIE9wZXJhdGlvbnMx
# JzAlBgNVBAsTHm5TaGllbGQgVFNTIEVTTjpBNDAwLTA1RTAtRDk0NzElMCMGA1UE
# AxMcTWljcm9zb2Z0IFRpbWUtU3RhbXAgU2VydmljZTCCAiIwDQYJKoZIhvcNAQEB
# BQADggIPADCCAgoCggIBALBH9G4JNuDFRZWb9V26Xba7B0RmbQigAWzqgivf1Ur8
# i0/zRyf7xOa0/ruJpsHgOYAon0Yfp0kaEQ8mlji9MpFI7CtE3FUgqg895QXd/hXI
# cRyj+7VBRp2XAPXfY25kLFueHoyLaUsbukO+zNmowbtLcwKLZuTae+0Yp14Agv4f
# vuAvivTVNJZvuuwTYlvU/83pj9bUKoOLX8hvf/NGpZe3jPG90gZw+NLhkrJAQXdI
# RkCrhciOLKjA8dqo1tnF1/aRY79qN19NTzm33fgJcCKdvSj65D0q1oo0tVVw1/lC
# lLh/r8yxc68gW4JgxF0oOOma+jAB4v7WPbtsLEIGkNAetaR8/Nmn9f5u30LsTmE8
# /odVGioFhHu7WBR/kYSr7mvUcDSNqOfRDo699hyQTQd06/opZr6wCYkbs8O9Nlp7
# vuGibPHog+qCBWk1m4KTv1J9Wacq70XnxQCdTnxOoMcTMaxCcxRAqy1LfOOfpJTQ
# 0sQU0J62W5oqSpYNFUsRZu7fb0gSHe2pc9d/LpGH/AJvB71IIkiiq0F7EGs/JBgD
# ZdrPV8r3KxOzHSQD1XUnBVXjghr1z4zC0BHqyop0CBGj9uz9e7yC5rwsN7opbK73
# vh72YZbtk7ydqsMWsBPURcYcO57KBIq+/YrvAHyUCAwYmPvcJC+v6OqhbDHpd3J5
# AgMBAAGjggFJMIIBRTAdBgNVHQ4EFgQU9FrQR2T+K/XCFhCxXxSAR/hMhYYwHwYD
# VR0jBBgwFoAUn6cVXQBeYl2D9OXSZacbUzUZ6XIwXwYDVR0fBFgwVjBUoFKgUIZO
# aHR0cDovL3d3dy5taWNyb3NvZnQuY29tL3BraW9wcy9jcmwvTWljcm9zb2Z0JTIw
# VGltZS1TdGFtcCUyMFBDQSUyMDIwMTAoMSkuY3JsMGwGCCsGAQUFBwEBBGAwXjBc
# BggrBgEFBQcwAoZQaHR0cDovL3d3dy5taWNyb3NvZnQuY29tL3BraW9wcy9jZXJ0
# cy9NaWNyb3NvZnQlMjBUaW1lLVN0YW1wJTIwUENBJTIwMjAxMCgxKS5jcnQwDAYD
# VR0TAQH/BAIwADAWBgNVHSUBAf8EDDAKBggrBgEFBQcDCDAOBgNVHQ8BAf8EBAMC
# B4AwDQYJKoZIhvcNAQELBQADggIBAJK8xKQxKu+OUM9qDwBFvQ4WsBC1IswOk3RR
# jcWO8+HAYoOuuLGae4x+OuZWNGrW7wiGQO8YX9t99sVOv4gCcNJ6DxMH3N8b/jJu
# Se6imSVt4aNu3swvGl+GiUIRHIRzbQ8xkonP1K/N+47WfnGuss4vybSea/mQFy/7
# LUBcnlBwuJyaF7Yinf8PrsR3qg+pAjTeYONhpLU1CEE227nvA8pdnUSg1OgGTxsD
# rzf3DXX1v5r1ZOioiyR1Eag/nGMMi/6ZzS8EeFkaQlW98iGbgCnzOm0LvFUCXLSN
# 46/l1QYwJiBmO+hOaB3jluoDC6d2Y+Ua6vt6V5Zh50tB/uzcvn6p9pj/ESH/26jX
# tKcz+AdVIYDO+et4aE6sHYu10qhVJ7kttimKFdy0N7vqJi0v6aHFc8SnN1rdsmWE
# 9M5Dco4RkClUREGjnKW1aM8JaVfHIKmXmOP2djSd93TvVt6aei7wDetRmt2Aohq6
# 2wftIc6I55tkao277rba8m1rd4BiwIBrEBwH0GIk+Vrtdp32qtNh1PjlWUJhO0FJ
# jihVGx51IAO/32O/+JggAbLVsLK25rSj9Cq/16sqbNAJNUxdoNzbkNMtwwYmtG5r
# crTGK922egF7HNUmvrJeoz4FrbCEhVG8ZyuIGQpfQUkV5buvb1df6TR7gOcbqIEc
# pCN5zpU3MIIHcTCCBVmgAwIBAgITMwAAABXF52ueAptJmQAAAAAAFTANBgkqhkiG
# 9w0BAQsFADCBiDELMAkGA1UEBhMCVVMxEzARBgNVBAgTCldhc2hpbmd0b24xEDAO
# BgNVBAcTB1JlZG1vbmQxHjAcBgNVBAoTFU1pY3Jvc29mdCBDb3Jwb3JhdGlvbjEy
# MDAGA1UEAxMpTWljcm9zb2Z0IFJvb3QgQ2VydGlmaWNhdGUgQXV0aG9yaXR5IDIw
# MTAwHhcNMjEwOTMwMTgyMjI1WhcNMzAwOTMwMTgzMjI1WjB8MQswCQYDVQQGEwJV
# UzETMBEGA1UECBMKV2FzaGluZ3RvbjEQMA4GA1UEBxMHUmVkbW9uZDEeMBwGA1UE
# ChMVTWljcm9zb2Z0IENvcnBvcmF0aW9uMSYwJAYDVQQDEx1NaWNyb3NvZnQgVGlt
# ZS1TdGFtcCBQQ0EgMjAxMDCCAiIwDQYJKoZIhvcNAQEBBQADggIPADCCAgoCggIB
# AOThpkzntHIhC3miy9ckeb0O1YLT/e6cBwfSqWxOdcjKNVf2AX9sSuDivbk+F2Az
# /1xPx2b3lVNxWuJ+Slr+uDZnhUYjDLWNE893MsAQGOhgfWpSg0S3po5GawcU88V2
# 9YZQ3MFEyHFcUTE3oAo4bo3t1w/YJlN8OWECesSq/XJprx2rrPY2vjUmZNqYO7oa
# ezOtgFt+jBAcnVL+tuhiJdxqD89d9P6OU8/W7IVWTe/dvI2k45GPsjksUZzpcGkN
# yjYtcI4xyDUoveO0hyTD4MmPfrVUj9z6BVWYbWg7mka97aSueik3rMvrg0XnRm7K
# MtXAhjBcTyziYrLNueKNiOSWrAFKu75xqRdbZ2De+JKRHh09/SDPc31BmkZ1zcRf
# NN0Sidb9pSB9fvzZnkXftnIv231fgLrbqn427DZM9ituqBJR6L8FA6PRc6ZNN3SU
# HDSCD/AQ8rdHGO2n6Jl8P0zbr17C89XYcz1DTsEzOUyOArxCaC4Q6oRRRuLRvWoY
# WmEBc8pnol7XKHYC4jMYctenIPDC+hIK12NvDMk2ZItboKaDIV1fMHSRlJTYuVD5
# C4lh8zYGNRiER9vcG9H9stQcxWv2XFJRXRLbJbqvUAV6bMURHXLvjflSxIUXk8A8
# FdsaN8cIFRg/eKtFtvUeh17aj54WcmnGrnu3tz5q4i6tAgMBAAGjggHdMIIB2TAS
# BgkrBgEEAYI3FQEEBQIDAQABMCMGCSsGAQQBgjcVAgQWBBQqp1L+ZMSavoKRPEY1
# Kc8Q/y8E7jAdBgNVHQ4EFgQUn6cVXQBeYl2D9OXSZacbUzUZ6XIwXAYDVR0gBFUw
# UzBRBgwrBgEEAYI3TIN9AQEwQTA/BggrBgEFBQcCARYzaHR0cDovL3d3dy5taWNy
# b3NvZnQuY29tL3BraW9wcy9Eb2NzL1JlcG9zaXRvcnkuaHRtMBMGA1UdJQQMMAoG
# CCsGAQUFBwMIMBkGCSsGAQQBgjcUAgQMHgoAUwB1AGIAQwBBMAsGA1UdDwQEAwIB
# hjAPBgNVHRMBAf8EBTADAQH/MB8GA1UdIwQYMBaAFNX2VsuP6KJcYmjRPZSQW9fO
# mhjEMFYGA1UdHwRPME0wS6BJoEeGRWh0dHA6Ly9jcmwubWljcm9zb2Z0LmNvbS9w
# a2kvY3JsL3Byb2R1Y3RzL01pY1Jvb0NlckF1dF8yMDEwLTA2LTIzLmNybDBaBggr
# BgEFBQcBAQROMEwwSgYIKwYBBQUHMAKGPmh0dHA6Ly93d3cubWljcm9zb2Z0LmNv
# bS9wa2kvY2VydHMvTWljUm9vQ2VyQXV0XzIwMTAtMDYtMjMuY3J0MA0GCSqGSIb3
# DQEBCwUAA4ICAQCdVX38Kq3hLB9nATEkW+Geckv8qW/qXBS2Pk5HZHixBpOXPTEz
# tTnXwnE2P9pkbHzQdTltuw8x5MKP+2zRoZQYIu7pZmc6U03dmLq2HnjYNi6cqYJW
# AAOwBb6J6Gngugnue99qb74py27YP0h1AdkY3m2CDPVtI1TkeFN1JFe53Z/zjj3G
# 82jfZfakVqr3lbYoVSfQJL1AoL8ZthISEV09J+BAljis9/kpicO8F7BUhUKz/Aye
# ixmJ5/ALaoHCgRlCGVJ1ijbCHcNhcy4sa3tuPywJeBTpkbKpW99Jo3QMvOyRgNI9
# 5ko+ZjtPu4b6MhrZlvSP9pEB9s7GdP32THJvEKt1MMU0sHrYUP4KWN1APMdUbZ1j
# dEgssU5HLcEUBHG/ZPkkvnNtyo4JvbMBV0lUZNlz138eW0QBjloZkWsNn6Qo3GcZ
# KCS6OEuabvshVGtqRRFHqfG3rsjoiV5PndLQTHa1V1QJsWkBRH58oWFsc/4Ku+xB
# Zj1p/cvBQUl+fpO+y/g75LcVv7TOPqUxUYS8vwLBgqJ7Fx0ViY1w/ue10CgaiQuP
# Ntq6TPmb/wrpNPgkNWcr4A245oyZ1uEi6vAnQj0llOZ0dFtq0Z4+7X6gMTN9vMvp
# e784cETRkPHIqzqKOghif9lwY1NNje6CbaUFEMFxBmoQtB1VM1izoXBm8qGCA00w
# ggI1AgEBMIH5oYHRpIHOMIHLMQswCQYDVQQGEwJVUzETMBEGA1UECBMKV2FzaGlu
# Z3RvbjEQMA4GA1UEBxMHUmVkbW9uZDEeMBwGA1UEChMVTWljcm9zb2Z0IENvcnBv
# cmF0aW9uMSUwIwYDVQQLExxNaWNyb3NvZnQgQW1lcmljYSBPcGVyYXRpb25zMScw
# JQYDVQQLEx5uU2hpZWxkIFRTUyBFU046QTQwMC0wNUUwLUQ5NDcxJTAjBgNVBAMT
# HE1pY3Jvc29mdCBUaW1lLVN0YW1wIFNlcnZpY2WiIwoBATAHBgUrDgMCGgMVAI4c
# +2BV3P0RbSI80v8FeomipUx/oIGDMIGApH4wfDELMAkGA1UEBhMCVVMxEzARBgNV
# BAgTCldhc2hpbmd0b24xEDAOBgNVBAcTB1JlZG1vbmQxHjAcBgNVBAoTFU1pY3Jv
# c29mdCBDb3Jwb3JhdGlvbjEmMCQGA1UEAxMdTWljcm9zb2Z0IFRpbWUtU3RhbXAg
# UENBIDIwMTAwDQYJKoZIhvcNAQELBQACBQDq4QjDMCIYDzIwMjQxMTE0MjMzOTQ3
# WhgPMjAyNDExMTUyMzM5NDdaMHQwOgYKKwYBBAGEWQoEATEsMCowCgIFAOrhCMMC
# AQAwBwIBAAICDPwwBwIBAAICEkMwCgIFAOriWkMCAQAwNgYKKwYBBAGEWQoEAjEo
# MCYwDAYKKwYBBAGEWQoDAqAKMAgCAQACAwehIKEKMAgCAQACAwGGoDANBgkqhkiG
# 9w0BAQsFAAOCAQEAlcQWYciKf35ZB4KbIr/EkYtGWmkeKYXf551Wzvh70E10ZPpA
# ddcE4GJc0f6OZuGyrHLiA3Y8caTtxqIzH+IBmtCRNtIyT/zlkSudRZ6uoEJ4TAh8
# kHRSDAQclspd3VRbDlJ6ydM3FV2GNRFtxlmirm80BorKLJNSUW2I87cJ/OvLW4sT
# HYwEJFccKzyI5mP0WsLiQWejj/YdZ7cLHURsEBU/QsEVZDPlQ/GJaDuaDbd8c8Nj
# ALghrdzn7anp37vuI+fZh3NosmB4/+IkUVQpBM/KeLWvNNDODwsE/ReRVEpVVZrM
# 7spXEB8epzjATskPo2HJITP4LijXJbhQS+df7zGCBA0wggQJAgEBMIGTMHwxCzAJ
# BgNVBAYTAlVTMRMwEQYDVQQIEwpXYXNoaW5ndG9uMRAwDgYDVQQHEwdSZWRtb25k
# MR4wHAYDVQQKExVNaWNyb3NvZnQgQ29ycG9yYXRpb24xJjAkBgNVBAMTHU1pY3Jv
# c29mdCBUaW1lLVN0YW1wIFBDQSAyMDEwAhMzAAAB7OArpILQkVKAAAEAAAHsMA0G
# CWCGSAFlAwQCAQUAoIIBSjAaBgkqhkiG9w0BCQMxDQYLKoZIhvcNAQkQAQQwLwYJ
# KoZIhvcNAQkEMSIEIHfVfYyaa/sKr3AQ4kQpv7ddOZSFuoDJKxiXODrECDzxMIH6
# BgsqhkiG9w0BCRACLzGB6jCB5zCB5DCBvQQgJwnm9Wp9N8iHHbVAEFsrKj/FyJAh
# dqgxZQt6MATVCoMwgZgwgYCkfjB8MQswCQYDVQQGEwJVUzETMBEGA1UECBMKV2Fz
# aGluZ3RvbjEQMA4GA1UEBxMHUmVkbW9uZDEeMBwGA1UEChMVTWljcm9zb2Z0IENv
# cnBvcmF0aW9uMSYwJAYDVQQDEx1NaWNyb3NvZnQgVGltZS1TdGFtcCBQQ0EgMjAx
# MAITMwAAAezgK6SC0JFSgAABAAAB7DAiBCBqaFK9X1j2wPM+0CU1+509DTFUESpW
# 69j5XCbn5O9SlDANBgkqhkiG9w0BAQsFAASCAgB4dgMaVBfve2YFQst6JqiFVG6X
# RjDkcqId3NF9+QRq8nRwfs3opuZzOgHAMusLKnMBg8OxvFLjntRJv76bkTFU2AgN
# SKmfuXA+6IBlaS77l0Y9Nhay1xmcdOCPDFSO2PuHmG2AaAHI15H+6PBib4Pg1kN3
# NyYKGVlwDQQFf56wfwkLYbyFETOGnHD+JmWFNxvdOfa6uzWPq9XIMc67YHDQyI65
# +Tl7qQI4/ltzDggjGpU/BoBs+4giyqQvb43OJY0YCglVx01fCrnTOkEmmq9BntO4
# AkMwl4nFjrZGs+aH9XVXNUG5MU3CR1z6V2dHTaK2wD9bTz2Hm/bQj+DNl4bnaKrp
# D5DMLwlUjh2wUb5g6uGDZGsOQl0+w7XjzPGJ6aSqoEQyYnD9vd8vzSouxUmEOM3b
# VNS8BzUooIo8fsdOY9UpFm7oyeXr7PnocGsHh0F/z6Kq63K34h+Zjs/mhdoVDaSJ
# S8vhe+L5qR5m4yas2MsYCqir97YmI5FX6HrUczwX3gtrh1u8YYEGQxt4wjoEAfW8
# yiqILCNGO1EX8sueRiVFlVy9AXBHfLsWfPeLpcBEcYBYbG3uAKYBHSbuVnmkIbLJ
# c2moz6xhdD2wRFtTTnonmVvptdB+iGl1vNwg8eALPxRFSt8JYdZ/UK2HCrbqhrId
# MvOGAVLONmbfTuqBqw==
# SIG # End signature block