Az.AksArc

0.1.2

AksArc.Autorest/exports/ProxyCmdletDefinitions.ps1


# ----------------------------------------------------------------------------------
# Copyright (c) Microsoft Corporation. All rights reserved.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
# http://www.apache.org/licenses/LICENSE-2.0
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# Code generated by Microsoft (R) AutoRest Code Generator.Changes may cause incorrect behavior and will be lost if the code
# is regenerated.
# ----------------------------------------------------------------------------------

<#
.Synopsis
Lists the virtual networks in the specified resource group
.Description
Lists the virtual networks in the specified resource group
.Example
Get-AzAksArcVirtualNetwork -Name "test-vnet-static" -ResourceGroupName "test-arcappliance-resgrp"
.Example
Get-AzAksArcVirtualNetwork -Name "test-vnet-static"
 
.Inputs
Microsoft.Azure.PowerShell.Cmdlets.AksArc.Models.IAksArcIdentity
.Outputs
Microsoft.Azure.PowerShell.Cmdlets.AksArc.Models.IVirtualNetwork
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
INPUTOBJECT <IAksArcIdentity>: Identity Parameter
  [AgentPoolName <String>]: Parameter for the name of the agent pool in the provisioned cluster.
  [ConnectedClusterResourceUri <String>]: The fully qualified Azure Resource Manager identifier of the connected cluster resource.
  [CustomLocationResourceUri <String>]: The fully qualified Azure Resource Manager identifier of the custom location resource.
  [Id <String>]: Resource identity path
  [ResourceGroupName <String>]: The name of the resource group. The name is case insensitive.
  [SubscriptionId <String>]: The ID of the target subscription. The value must be an UUID.
  [VirtualNetworkName <String>]: Parameter for the name of the virtual network
.Link
https://learn.microsoft.com/powershell/module/az.aksarc/get-azaksarcvirtualnetwork
#>
function Get-AzAksArcVirtualNetwork {
[OutputType([Microsoft.Azure.PowerShell.Cmdlets.AksArc.Models.IVirtualNetwork])]
[CmdletBinding(DefaultParameterSetName='List1', PositionalBinding=$false)]
param(
    [Parameter(ParameterSetName='List', Mandatory)]
    [Parameter(ParameterSetName='Retrieve', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Path')]
    [System.String]
    # The name of the resource group.
    # The name is case insensitive.
    ${ResourceGroupName},

    [Parameter(ParameterSetName='List')]
    [Parameter(ParameterSetName='List1')]
    [Parameter(ParameterSetName='Retrieve')]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.DefaultInfo(Script='(Get-AzContext).Subscription.Id')]
    [System.String[]]
    # The ID of the target subscription.
    # The value must be an UUID.
    ${SubscriptionId},

    [Parameter(ParameterSetName='Retrieve', Mandatory)]
    [Alias('VirtualNetworkName')]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Path')]
    [System.String]
    # Parameter for the name of the virtual network
    ${Name},

    [Parameter(ParameterSetName='RetrieveViaIdentity', Mandatory, ValueFromPipeline)]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Models.IAksArcIdentity]
    # Identity Parameter
    ${InputObject},

    [Parameter()]
    [Alias('AzureRMContext', 'AzureCredential')]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Azure')]
    [System.Management.Automation.PSObject]
    # The DefaultProfile parameter is not functional.
    # Use the SubscriptionId parameter when available if executing the cmdlet against a different subscription.
    ${DefaultProfile},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        if ($null -eq [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion) {
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion = $PSVersionTable.PSVersion.ToString()
        }         
        $preTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        if ($preTelemetryId -eq '') {
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId =(New-Guid).ToString()
            [Microsoft.Azure.PowerShell.Cmdlets.AksArc.module]::Instance.Telemetry.Invoke('Create', $MyInvocation, $parameterSet, $PSCmdlet)
        } else {
            $internalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
            if ($internalCalledCmdlets -eq '') {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $MyInvocation.MyCommand.Name
            } else {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets += ',' + $MyInvocation.MyCommand.Name
            }
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = 'internal'
        }

        $mapping = @{
            List = 'Az.AksArc.private\Get-AzAksArcVirtualNetwork_List';
            List1 = 'Az.AksArc.private\Get-AzAksArcVirtualNetwork_List1';
            Retrieve = 'Az.AksArc.private\Get-AzAksArcVirtualNetwork_Retrieve';
            RetrieveViaIdentity = 'Az.AksArc.private\Get-AzAksArcVirtualNetwork_RetrieveViaIdentity';
        }
        if (('List', 'List1', 'Retrieve') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('SubscriptionId') ) {
            $testPlayback = $false
            $PSBoundParameters['HttpPipelinePrepend'] | Foreach-Object { if ($_) { $testPlayback = $testPlayback -or ('Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.PipelineMock' -eq $_.Target.GetType().FullName -and 'Playback' -eq $_.Target.Mode) } }
            if ($testPlayback) {
                $PSBoundParameters['SubscriptionId'] = . (Join-Path $PSScriptRoot '..' 'utils' 'Get-SubscriptionIdTestSafe.ps1')
            } else {
                $PSBoundParameters['SubscriptionId'] = (Get-AzContext).Subscription.Id
            }
        }
        $cmdInfo = Get-Command -Name $mapping[$parameterSet]
        [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.MessageAttributeHelper]::ProcessCustomAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
        if ($null -ne $MyInvocation.MyCommand -and [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets -notcontains $MyInvocation.MyCommand.Name -and [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.MessageAttributeHelper]::ContainsPreviewAttribute($cmdInfo, $MyInvocation)){
            [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.MessageAttributeHelper]::ProcessPreviewMessageAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets.Enqueue($MyInvocation.MyCommand.Name)
        }
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }

    finally {
        $backupTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        $backupInternalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
    }

}
end {
    try {
        $steppablePipeline.End()

        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $backupTelemetryId
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $backupInternalCalledCmdlets
        if ($preTelemetryId -eq '') {
            [Microsoft.Azure.PowerShell.Cmdlets.AksArc.module]::Instance.Telemetry.Invoke('Send', $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        }
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $preTelemetryId

    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
} 
}

<#
.Synopsis
Deletes the specified virtual network resource
.Description
Deletes the specified virtual network resource
.Example
Remove-AzAksArcVirtualNetwork -Name "test-vnet-static" -ResourceGroupName "test-arcappliance-resgrp"
 
.Inputs
Microsoft.Azure.PowerShell.Cmdlets.AksArc.Models.IAksArcIdentity
.Outputs
System.Boolean
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
INPUTOBJECT <IAksArcIdentity>: Identity Parameter
  [AgentPoolName <String>]: Parameter for the name of the agent pool in the provisioned cluster.
  [ConnectedClusterResourceUri <String>]: The fully qualified Azure Resource Manager identifier of the connected cluster resource.
  [CustomLocationResourceUri <String>]: The fully qualified Azure Resource Manager identifier of the custom location resource.
  [Id <String>]: Resource identity path
  [ResourceGroupName <String>]: The name of the resource group. The name is case insensitive.
  [SubscriptionId <String>]: The ID of the target subscription. The value must be an UUID.
  [VirtualNetworkName <String>]: Parameter for the name of the virtual network
.Link
https://learn.microsoft.com/powershell/module/az.aksarc/remove-azaksarcvirtualnetwork
#>
function Remove-AzAksArcVirtualNetwork {
[OutputType([System.Boolean])]
[CmdletBinding(DefaultParameterSetName='Delete', PositionalBinding=$false, SupportsShouldProcess, ConfirmImpact='Medium')]
param(
    [Parameter(ParameterSetName='Delete', Mandatory)]
    [Alias('VirtualNetworkName')]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Path')]
    [System.String]
    # Parameter for the name of the virtual network
    ${Name},

    [Parameter(ParameterSetName='Delete', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Path')]
    [System.String]
    # The name of the resource group.
    # The name is case insensitive.
    ${ResourceGroupName},

    [Parameter(ParameterSetName='Delete')]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.DefaultInfo(Script='(Get-AzContext).Subscription.Id')]
    [System.String]
    # The ID of the target subscription.
    # The value must be an UUID.
    ${SubscriptionId},

    [Parameter(ParameterSetName='DeleteViaIdentity', Mandatory, ValueFromPipeline)]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Models.IAksArcIdentity]
    # Identity Parameter
    ${InputObject},

    [Parameter()]
    [Alias('AzureRMContext', 'AzureCredential')]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Azure')]
    [System.Management.Automation.PSObject]
    # The DefaultProfile parameter is not functional.
    # Use the SubscriptionId parameter when available if executing the cmdlet against a different subscription.
    ${DefaultProfile},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Run the command as a job
    ${AsJob},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Run the command asynchronously
    ${NoWait},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Returns true when the command succeeds
    ${PassThru},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        if ($null -eq [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion) {
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion = $PSVersionTable.PSVersion.ToString()
        }         
        $preTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        if ($preTelemetryId -eq '') {
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId =(New-Guid).ToString()
            [Microsoft.Azure.PowerShell.Cmdlets.AksArc.module]::Instance.Telemetry.Invoke('Create', $MyInvocation, $parameterSet, $PSCmdlet)
        } else {
            $internalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
            if ($internalCalledCmdlets -eq '') {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $MyInvocation.MyCommand.Name
            } else {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets += ',' + $MyInvocation.MyCommand.Name
            }
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = 'internal'
        }

        $mapping = @{
            Delete = 'Az.AksArc.private\Remove-AzAksArcVirtualNetwork_Delete';
            DeleteViaIdentity = 'Az.AksArc.private\Remove-AzAksArcVirtualNetwork_DeleteViaIdentity';
        }
        if (('Delete') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('SubscriptionId') ) {
            $testPlayback = $false
            $PSBoundParameters['HttpPipelinePrepend'] | Foreach-Object { if ($_) { $testPlayback = $testPlayback -or ('Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.PipelineMock' -eq $_.Target.GetType().FullName -and 'Playback' -eq $_.Target.Mode) } }
            if ($testPlayback) {
                $PSBoundParameters['SubscriptionId'] = . (Join-Path $PSScriptRoot '..' 'utils' 'Get-SubscriptionIdTestSafe.ps1')
            } else {
                $PSBoundParameters['SubscriptionId'] = (Get-AzContext).Subscription.Id
            }
        }
        $cmdInfo = Get-Command -Name $mapping[$parameterSet]
        [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.MessageAttributeHelper]::ProcessCustomAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
        if ($null -ne $MyInvocation.MyCommand -and [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets -notcontains $MyInvocation.MyCommand.Name -and [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.MessageAttributeHelper]::ContainsPreviewAttribute($cmdInfo, $MyInvocation)){
            [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.MessageAttributeHelper]::ProcessPreviewMessageAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets.Enqueue($MyInvocation.MyCommand.Name)
        }
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }

    finally {
        $backupTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        $backupInternalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
    }

}
end {
    try {
        $steppablePipeline.End()

        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $backupTelemetryId
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $backupInternalCalledCmdlets
        if ($preTelemetryId -eq '') {
            [Microsoft.Azure.PowerShell.Cmdlets.AksArc.module]::Instance.Telemetry.Invoke('Send', $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        }
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $preTelemetryId

    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
} 
}

<#
.Synopsis
Gets the provisioned cluster instance
.Description
Gets the provisioned cluster instance
.Example
Get-AzAksArcCluster -ClusterName azps_test_cluster -ResourceGroupName azps_test_group
 
.Outputs
Microsoft.Azure.PowerShell.Cmdlets.AksArc.Models.IProvisionedCluster
.Link
https://learn.microsoft.com/powershell/module/az.aksarc/get-azaksarccluster
#>
function Get-AzAksArcCluster {
[OutputType([Microsoft.Azure.PowerShell.Cmdlets.AksArc.Models.IProvisionedCluster])]
[CmdletBinding(DefaultParameterSetName='Get', PositionalBinding=$false)]
param(
    [Parameter(Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Path')]
    [System.String]
    # The name of the Kubernetes cluster on which get is called.
    ${ClusterName},

    [Parameter(Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Path')]
    [System.String]
    # The name of the resource group.
    # The name is case insensitive.
    ${ResourceGroupName},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.DefaultInfo(Script='(Get-AzContext).Subscription.Id')]
    [System.String]
    # The ID of the target subscription.
    ${SubscriptionId},

    [Parameter()]
    [Alias('AzureRMContext', 'AzureCredential')]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Azure')]
    [System.Management.Automation.PSObject]
    # The DefaultProfile parameter is not functional.
    # Use the SubscriptionId parameter when available if executing the cmdlet against a different subscription.
    ${DefaultProfile},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        if ($null -eq [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion) {
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion = $PSVersionTable.PSVersion.ToString()
        }         
        $preTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        if ($preTelemetryId -eq '') {
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId =(New-Guid).ToString()
            [Microsoft.Azure.PowerShell.Cmdlets.AksArc.module]::Instance.Telemetry.Invoke('Create', $MyInvocation, $parameterSet, $PSCmdlet)
        } else {
            $internalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
            if ($internalCalledCmdlets -eq '') {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $MyInvocation.MyCommand.Name
            } else {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets += ',' + $MyInvocation.MyCommand.Name
            }
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = 'internal'
        }

        $mapping = @{
            Get = 'Az.AksArc.custom\Get-AzAksArcCluster';
        }
        if (('Get') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('SubscriptionId') ) {
            $testPlayback = $false
            $PSBoundParameters['HttpPipelinePrepend'] | Foreach-Object { if ($_) { $testPlayback = $testPlayback -or ('Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.PipelineMock' -eq $_.Target.GetType().FullName -and 'Playback' -eq $_.Target.Mode) } }
            if ($testPlayback) {
                $PSBoundParameters['SubscriptionId'] = . (Join-Path $PSScriptRoot '..' 'utils' 'Get-SubscriptionIdTestSafe.ps1')
            } else {
                $PSBoundParameters['SubscriptionId'] = (Get-AzContext).Subscription.Id
            }
        }
        $cmdInfo = Get-Command -Name $mapping[$parameterSet]
        [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.MessageAttributeHelper]::ProcessCustomAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
        if ($null -ne $MyInvocation.MyCommand -and [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets -notcontains $MyInvocation.MyCommand.Name -and [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.MessageAttributeHelper]::ContainsPreviewAttribute($cmdInfo, $MyInvocation)){
            [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.MessageAttributeHelper]::ProcessPreviewMessageAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets.Enqueue($MyInvocation.MyCommand.Name)
        }
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }

    finally {
        $backupTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        $backupInternalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
    }

}
end {
    try {
        $steppablePipeline.End()

        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $backupTelemetryId
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $backupInternalCalledCmdlets
        if ($preTelemetryId -eq '') {
            [Microsoft.Azure.PowerShell.Cmdlets.AksArc.module]::Instance.Telemetry.Invoke('Send', $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        }
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $preTelemetryId

    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
} 
}

<#
.Synopsis
Lists the admin credentials of the provisioned cluster (can only be used within private network)
.Description
Lists the admin credentials of the provisioned cluster (can only be used within private network)
.Example
Get-AzAksArcClusterAdminKubeconfig -ClusterName azps_test_cluster -ResourceGroupName azps_test_group
.Example
Get-AzAksArcClusterAdminKubeconfig -ClusterName azps_test_cluster -ResourceGroupName azps_test_group -FilePath "C:\Users\sampleuser\samplekubeconfig"
 
.Outputs
Microsoft.Azure.PowerShell.Cmdlets.AksArc.Models.IListCredentialResponse
.Link
https://learn.microsoft.com/powershell/module/az.aksarc/get-azaksarcclusteradminkubeconfig
#>
function Get-AzAksArcClusterAdminKubeconfig {
[OutputType([Microsoft.Azure.PowerShell.Cmdlets.AksArc.Models.IListCredentialResponse])]
[CmdletBinding(DefaultParameterSetName='List', PositionalBinding=$false, SupportsShouldProcess, ConfirmImpact='Medium')]
param(
    [Parameter(Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Path')]
    [System.String]
    # The name of the Kubernetes cluster on which get is called.
    ${ClusterName},

    [Parameter(Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Path')]
    [System.String]
    # The name of the resource group.
    # The name is case insensitive.
    ${ResourceGroupName},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.DefaultInfo(Script='(Get-AzContext).Subscription.Id')]
    [System.String]
    # The ID of the target subscription.
    ${SubscriptionId},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Path')]
    [System.String]
    # The path to save the kubeconfig to.
    ${FilePath},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Run the command as a job
    ${AsJob},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Run the command asynchronously
    ${NoWait},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        if ($null -eq [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion) {
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion = $PSVersionTable.PSVersion.ToString()
        }         
        $preTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        if ($preTelemetryId -eq '') {
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId =(New-Guid).ToString()
            [Microsoft.Azure.PowerShell.Cmdlets.AksArc.module]::Instance.Telemetry.Invoke('Create', $MyInvocation, $parameterSet, $PSCmdlet)
        } else {
            $internalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
            if ($internalCalledCmdlets -eq '') {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $MyInvocation.MyCommand.Name
            } else {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets += ',' + $MyInvocation.MyCommand.Name
            }
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = 'internal'
        }

        $mapping = @{
            List = 'Az.AksArc.custom\Get-AzAksArcClusterAdminKubeconfig';
        }
        if (('List') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('SubscriptionId') ) {
            $testPlayback = $false
            $PSBoundParameters['HttpPipelinePrepend'] | Foreach-Object { if ($_) { $testPlayback = $testPlayback -or ('Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.PipelineMock' -eq $_.Target.GetType().FullName -and 'Playback' -eq $_.Target.Mode) } }
            if ($testPlayback) {
                $PSBoundParameters['SubscriptionId'] = . (Join-Path $PSScriptRoot '..' 'utils' 'Get-SubscriptionIdTestSafe.ps1')
            } else {
                $PSBoundParameters['SubscriptionId'] = (Get-AzContext).Subscription.Id
            }
        }
        $cmdInfo = Get-Command -Name $mapping[$parameterSet]
        [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.MessageAttributeHelper]::ProcessCustomAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
        if ($null -ne $MyInvocation.MyCommand -and [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets -notcontains $MyInvocation.MyCommand.Name -and [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.MessageAttributeHelper]::ContainsPreviewAttribute($cmdInfo, $MyInvocation)){
            [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.MessageAttributeHelper]::ProcessPreviewMessageAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets.Enqueue($MyInvocation.MyCommand.Name)
        }
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }

    finally {
        $backupTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        $backupInternalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
    }

}
end {
    try {
        $steppablePipeline.End()

        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $backupTelemetryId
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $backupInternalCalledCmdlets
        if ($preTelemetryId -eq '') {
            [Microsoft.Azure.PowerShell.Cmdlets.AksArc.module]::Instance.Telemetry.Invoke('Send', $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        }
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $preTelemetryId

    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
} 
}

<#
.Synopsis
Gets the upgrade profile of a provisioned cluster
.Description
Gets the upgrade profile of a provisioned cluster
.Example
Get-AzAksArcClusterUpgrade -ClusterName azps_test_cluster -ResourceGroupName azps_test_group
 
.Outputs
Microsoft.Azure.PowerShell.Cmdlets.AksArc.Models.IProvisionedClusterUpgradeProfile
.Link
https://learn.microsoft.com/powershell/module/az.aksarc/get-azaksarcclusterupgrade
#>
function Get-AzAksArcClusterUpgrade {
[OutputType([Microsoft.Azure.PowerShell.Cmdlets.AksArc.Models.IProvisionedClusterUpgradeProfile])]
[CmdletBinding(DefaultParameterSetName='Get', PositionalBinding=$false)]
param(
    [Parameter(Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Path')]
    [System.String]
    # The name of the Kubernetes cluster on which get is called.
    ${ClusterName},

    [Parameter(Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Path')]
    [System.String]
    # The name of the resource group.
    # The name is case insensitive.
    ${ResourceGroupName},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.DefaultInfo(Script='(Get-AzContext).Subscription.Id')]
    [System.String]
    # The ID of the target subscription.
    ${SubscriptionId},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        if ($null -eq [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion) {
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion = $PSVersionTable.PSVersion.ToString()
        }         
        $preTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        if ($preTelemetryId -eq '') {
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId =(New-Guid).ToString()
            [Microsoft.Azure.PowerShell.Cmdlets.AksArc.module]::Instance.Telemetry.Invoke('Create', $MyInvocation, $parameterSet, $PSCmdlet)
        } else {
            $internalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
            if ($internalCalledCmdlets -eq '') {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $MyInvocation.MyCommand.Name
            } else {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets += ',' + $MyInvocation.MyCommand.Name
            }
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = 'internal'
        }

        $mapping = @{
            Get = 'Az.AksArc.custom\Get-AzAksArcClusterUpgrade';
        }
        if (('Get') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('SubscriptionId') ) {
            $testPlayback = $false
            $PSBoundParameters['HttpPipelinePrepend'] | Foreach-Object { if ($_) { $testPlayback = $testPlayback -or ('Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.PipelineMock' -eq $_.Target.GetType().FullName -and 'Playback' -eq $_.Target.Mode) } }
            if ($testPlayback) {
                $PSBoundParameters['SubscriptionId'] = . (Join-Path $PSScriptRoot '..' 'utils' 'Get-SubscriptionIdTestSafe.ps1')
            } else {
                $PSBoundParameters['SubscriptionId'] = (Get-AzContext).Subscription.Id
            }
        }
        $cmdInfo = Get-Command -Name $mapping[$parameterSet]
        [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.MessageAttributeHelper]::ProcessCustomAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
        if ($null -ne $MyInvocation.MyCommand -and [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets -notcontains $MyInvocation.MyCommand.Name -and [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.MessageAttributeHelper]::ContainsPreviewAttribute($cmdInfo, $MyInvocation)){
            [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.MessageAttributeHelper]::ProcessPreviewMessageAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets.Enqueue($MyInvocation.MyCommand.Name)
        }
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }

    finally {
        $backupTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        $backupInternalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
    }

}
end {
    try {
        $steppablePipeline.End()

        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $backupTelemetryId
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $backupInternalCalledCmdlets
        if ($preTelemetryId -eq '') {
            [Microsoft.Azure.PowerShell.Cmdlets.AksArc.module]::Instance.Telemetry.Invoke('Send', $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        }
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $preTelemetryId

    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
} 
}

<#
.Synopsis
Lists the user credentials of the provisioned cluster (can only be used within private network)
.Description
Lists the user credentials of the provisioned cluster (can only be used within private network)
.Example
Get-AzAksArcClusterUserKubeconfig -ClusterName azps_test_cluster -ResourceGroupName azps_test_group
.Example
Get-AzAksArcClusterUserKubeconfig -ClusterName azps_test_cluster -ResourceGroupName azps_test_group -FilePath "C:\Users\sampleuser\samplekubeconfig"
 
.Outputs
Microsoft.Azure.PowerShell.Cmdlets.AksArc.Models.IListCredentialResponse
.Link
https://learn.microsoft.com/powershell/module/az.aksarc/get-azaksarcclusteruserkubeconfig
#>
function Get-AzAksArcClusterUserKubeconfig {
[OutputType([Microsoft.Azure.PowerShell.Cmdlets.AksArc.Models.IListCredentialResponse])]
[CmdletBinding(DefaultParameterSetName='List', PositionalBinding=$false, SupportsShouldProcess, ConfirmImpact='Medium')]
param(
    [Parameter(Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Path')]
    [System.String]
    # The name of the Kubernetes cluster on which get is called.
    ${ClusterName},

    [Parameter(Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Path')]
    [System.String]
    # The name of the resource group.
    # The name is case insensitive.
    ${ResourceGroupName},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.DefaultInfo(Script='(Get-AzContext).Subscription.Id')]
    [System.String]
    # The ID of the target subscription.
    ${SubscriptionId},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Path')]
    [System.String]
    # The path to save the kubeconfig to.
    ${FilePath},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Run the command as a job
    ${AsJob},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Run the command asynchronously
    ${NoWait},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        if ($null -eq [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion) {
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion = $PSVersionTable.PSVersion.ToString()
        }         
        $preTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        if ($preTelemetryId -eq '') {
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId =(New-Guid).ToString()
            [Microsoft.Azure.PowerShell.Cmdlets.AksArc.module]::Instance.Telemetry.Invoke('Create', $MyInvocation, $parameterSet, $PSCmdlet)
        } else {
            $internalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
            if ($internalCalledCmdlets -eq '') {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $MyInvocation.MyCommand.Name
            } else {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets += ',' + $MyInvocation.MyCommand.Name
            }
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = 'internal'
        }

        $mapping = @{
            List = 'Az.AksArc.custom\Get-AzAksArcClusterUserKubeconfig';
        }
        if (('List') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('SubscriptionId') ) {
            $testPlayback = $false
            $PSBoundParameters['HttpPipelinePrepend'] | Foreach-Object { if ($_) { $testPlayback = $testPlayback -or ('Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.PipelineMock' -eq $_.Target.GetType().FullName -and 'Playback' -eq $_.Target.Mode) } }
            if ($testPlayback) {
                $PSBoundParameters['SubscriptionId'] = . (Join-Path $PSScriptRoot '..' 'utils' 'Get-SubscriptionIdTestSafe.ps1')
            } else {
                $PSBoundParameters['SubscriptionId'] = (Get-AzContext).Subscription.Id
            }
        }
        $cmdInfo = Get-Command -Name $mapping[$parameterSet]
        [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.MessageAttributeHelper]::ProcessCustomAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
        if ($null -ne $MyInvocation.MyCommand -and [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets -notcontains $MyInvocation.MyCommand.Name -and [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.MessageAttributeHelper]::ContainsPreviewAttribute($cmdInfo, $MyInvocation)){
            [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.MessageAttributeHelper]::ProcessPreviewMessageAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets.Enqueue($MyInvocation.MyCommand.Name)
        }
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }

    finally {
        $backupTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        $backupInternalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
    }

}
end {
    try {
        $steppablePipeline.End()

        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $backupTelemetryId
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $backupInternalCalledCmdlets
        if ($preTelemetryId -eq '') {
            [Microsoft.Azure.PowerShell.Cmdlets.AksArc.module]::Instance.Telemetry.Invoke('Send', $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        }
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $preTelemetryId

    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
} 
}

<#
.Synopsis
Lists the supported kubernetes versions for the specified custom location
.Description
Lists the supported kubernetes versions for the specified custom location
.Example
Get-AzAksArcKubernetesVersion -CustomLocationName sample_cl
 
.Outputs
Microsoft.Azure.PowerShell.Cmdlets.AksArc.Models.IKubernetesVersionProfile
.Link
https://learn.microsoft.com/powershell/module/az.aksarc/get-azaksarckubernetesversion
#>
function Get-AzAksArcKubernetesVersion {
[OutputType([Microsoft.Azure.PowerShell.Cmdlets.AksArc.Models.IKubernetesVersionProfile])]
[CmdletBinding(DefaultParameterSetName='Get', PositionalBinding=$false)]
param(
    [Parameter(Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Path')]
    [System.String]
    # The name or id of the custom location.
    ${CustomLocationName},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Path')]
    [System.String]
    # The name of the resource group.
    # The name is case insensitive.
    ${ResourceGroupName},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.DefaultInfo(Script='(Get-AzContext).Subscription.Id')]
    [System.String]
    # The ID of the target subscription.
    ${SubscriptionId},

    [Parameter()]
    [Alias('AzureRMContext', 'AzureCredential')]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Azure')]
    [System.Management.Automation.PSObject]
    # The DefaultProfile parameter is not functional.
    # Use the SubscriptionId parameter when available if executing the cmdlet against a different subscription.
    ${DefaultProfile},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        if ($null -eq [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion) {
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion = $PSVersionTable.PSVersion.ToString()
        }         
        $preTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        if ($preTelemetryId -eq '') {
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId =(New-Guid).ToString()
            [Microsoft.Azure.PowerShell.Cmdlets.AksArc.module]::Instance.Telemetry.Invoke('Create', $MyInvocation, $parameterSet, $PSCmdlet)
        } else {
            $internalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
            if ($internalCalledCmdlets -eq '') {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $MyInvocation.MyCommand.Name
            } else {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets += ',' + $MyInvocation.MyCommand.Name
            }
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = 'internal'
        }

        $mapping = @{
            Get = 'Az.AksArc.custom\Get-AzAksArcKubernetesVersion';
        }
        if (('Get') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('SubscriptionId') ) {
            $testPlayback = $false
            $PSBoundParameters['HttpPipelinePrepend'] | Foreach-Object { if ($_) { $testPlayback = $testPlayback -or ('Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.PipelineMock' -eq $_.Target.GetType().FullName -and 'Playback' -eq $_.Target.Mode) } }
            if ($testPlayback) {
                $PSBoundParameters['SubscriptionId'] = . (Join-Path $PSScriptRoot '..' 'utils' 'Get-SubscriptionIdTestSafe.ps1')
            } else {
                $PSBoundParameters['SubscriptionId'] = (Get-AzContext).Subscription.Id
            }
        }
        $cmdInfo = Get-Command -Name $mapping[$parameterSet]
        [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.MessageAttributeHelper]::ProcessCustomAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
        if ($null -ne $MyInvocation.MyCommand -and [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets -notcontains $MyInvocation.MyCommand.Name -and [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.MessageAttributeHelper]::ContainsPreviewAttribute($cmdInfo, $MyInvocation)){
            [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.MessageAttributeHelper]::ProcessPreviewMessageAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets.Enqueue($MyInvocation.MyCommand.Name)
        }
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }

    finally {
        $backupTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        $backupInternalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
    }

}
end {
    try {
        $steppablePipeline.End()

        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $backupTelemetryId
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $backupInternalCalledCmdlets
        if ($preTelemetryId -eq '') {
            [Microsoft.Azure.PowerShell.Cmdlets.AksArc.module]::Instance.Telemetry.Invoke('Send', $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        }
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $preTelemetryId

    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
} 
}

<#
.Synopsis
Gets the provisioned cluster instance
.Description
Gets the provisioned cluster instance
.Example
Get-AzAksArcLog -ipAddress 1.1.1.1 -sshkeypath "" -outdir "/logs"
 
.Outputs
Microsoft.Azure.PowerShell.Cmdlets.AksArc.Models.IProvisionedCluster
.Link
https://learn.microsoft.com/powershell/module/az.aksarc/get-azaksarclog
#>
function Get-AzAksArcLog {
[OutputType([Microsoft.Azure.PowerShell.Cmdlets.AksArc.Models.IProvisionedCluster])]
[CmdletBinding(DefaultParameterSetName='Get', PositionalBinding=$false)]
param(
    [Parameter(Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Path')]
    [System.String]
    # IP Address of provisioned cluster
    ${ipAddress},

    [Parameter(Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Path')]
    [System.String]
    # Path to ssh key for provisioned cluster
    ${sshkeypath},

    [Parameter(Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Path')]
    [System.String]
    # Directory to output logs
    ${outdir},

    [Parameter()]
    [Alias('AzureRMContext', 'AzureCredential')]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Azure')]
    [System.Management.Automation.PSObject]
    # The DefaultProfile parameter is not functional.
    # Use the SubscriptionId parameter when available if executing the cmdlet against a different subscription.
    ${DefaultProfile},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        if ($null -eq [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion) {
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion = $PSVersionTable.PSVersion.ToString()
        }         
        $preTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        if ($preTelemetryId -eq '') {
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId =(New-Guid).ToString()
            [Microsoft.Azure.PowerShell.Cmdlets.AksArc.module]::Instance.Telemetry.Invoke('Create', $MyInvocation, $parameterSet, $PSCmdlet)
        } else {
            $internalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
            if ($internalCalledCmdlets -eq '') {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $MyInvocation.MyCommand.Name
            } else {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets += ',' + $MyInvocation.MyCommand.Name
            }
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = 'internal'
        }

        $mapping = @{
            Get = 'Az.AksArc.custom\Get-AzAksArcLog';
        }
        $cmdInfo = Get-Command -Name $mapping[$parameterSet]
        [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.MessageAttributeHelper]::ProcessCustomAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
        if ($null -ne $MyInvocation.MyCommand -and [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets -notcontains $MyInvocation.MyCommand.Name -and [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.MessageAttributeHelper]::ContainsPreviewAttribute($cmdInfo, $MyInvocation)){
            [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.MessageAttributeHelper]::ProcessPreviewMessageAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets.Enqueue($MyInvocation.MyCommand.Name)
        }
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }

    finally {
        $backupTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        $backupInternalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
    }

}
end {
    try {
        $steppablePipeline.End()

        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $backupTelemetryId
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $backupInternalCalledCmdlets
        if ($preTelemetryId -eq '') {
            [Microsoft.Azure.PowerShell.Cmdlets.AksArc.module]::Instance.Telemetry.Invoke('Send', $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        }
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $preTelemetryId

    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
} 
}

<#
.Synopsis
Gets the specified agent pool in the provisioned cluster
.Description
Gets the specified agent pool in the provisioned cluster
.Example
Get-AzAksArcNodepool -ClusterName azps_test_cluster -ResourceGroupName azps_test_group
.Example
Get-AzAksArcNodepool -ClusterName azps_test_cluster -ResourceGroupName azps_test_group -Name azps_test_nodepool1
 
.Inputs
Microsoft.Azure.PowerShell.Cmdlets.AksArc.Models.IAksArcIdentity
.Outputs
Microsoft.Azure.PowerShell.Cmdlets.AksArc.Models.IAgentPool
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
INPUTOBJECT <IAksArcIdentity>: Identity Parameter
  [AgentPoolName <String>]: Parameter for the name of the agent pool in the provisioned cluster.
  [ConnectedClusterResourceUri <String>]: The fully qualified Azure Resource Manager identifier of the connected cluster resource.
  [CustomLocationResourceUri <String>]: The fully qualified Azure Resource Manager identifier of the custom location resource.
  [Id <String>]: Resource identity path
  [ResourceGroupName <String>]: The name of the resource group. The name is case insensitive.
  [SubscriptionId <String>]: The ID of the target subscription. The value must be an UUID.
  [VirtualNetworkName <String>]: Parameter for the name of the virtual network
.Link
https://learn.microsoft.com/powershell/module/az.aksarc/get-azaksarcnodepool
#>
function Get-AzAksArcNodepool {
[OutputType([Microsoft.Azure.PowerShell.Cmdlets.AksArc.Models.IAgentPool])]
[CmdletBinding(DefaultParameterSetName='List', PositionalBinding=$false)]
param(
    [Parameter(Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Path')]
    [System.String]
    # The name of the Kubernetes cluster on which get is called.
    ${ClusterName},

    [Parameter(Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Path')]
    [System.String]
    # The name of the resource group.
    # The name is case insensitive.
    ${ResourceGroupName},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.DefaultInfo(Script='(Get-AzContext).Subscription.Id')]
    [System.String]
    # The ID of the target subscription.
    ${SubscriptionId},

    [Parameter(ParameterSetName='Get', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Path')]
    [System.String]
    # Parameter for the name of the agent pool in the provisioned cluster.
    ${Name},

    [Parameter(ParameterSetName='GetViaIdentity', Mandatory, ValueFromPipeline)]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Models.IAksArcIdentity]
    # Identity Parameter
    ${InputObject},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        if ($null -eq [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion) {
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion = $PSVersionTable.PSVersion.ToString()
        }         
        $preTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        if ($preTelemetryId -eq '') {
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId =(New-Guid).ToString()
            [Microsoft.Azure.PowerShell.Cmdlets.AksArc.module]::Instance.Telemetry.Invoke('Create', $MyInvocation, $parameterSet, $PSCmdlet)
        } else {
            $internalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
            if ($internalCalledCmdlets -eq '') {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $MyInvocation.MyCommand.Name
            } else {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets += ',' + $MyInvocation.MyCommand.Name
            }
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = 'internal'
        }

        $mapping = @{
            List = 'Az.AksArc.custom\Get-AzAksArcNodepool';
            Get = 'Az.AksArc.custom\Get-AzAksArcNodepool';
            GetViaIdentity = 'Az.AksArc.custom\Get-AzAksArcNodepool';
        }
        if (('List', 'Get', 'GetViaIdentity') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('SubscriptionId') ) {
            $testPlayback = $false
            $PSBoundParameters['HttpPipelinePrepend'] | Foreach-Object { if ($_) { $testPlayback = $testPlayback -or ('Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.PipelineMock' -eq $_.Target.GetType().FullName -and 'Playback' -eq $_.Target.Mode) } }
            if ($testPlayback) {
                $PSBoundParameters['SubscriptionId'] = . (Join-Path $PSScriptRoot '..' 'utils' 'Get-SubscriptionIdTestSafe.ps1')
            } else {
                $PSBoundParameters['SubscriptionId'] = (Get-AzContext).Subscription.Id
            }
        }
        $cmdInfo = Get-Command -Name $mapping[$parameterSet]
        [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.MessageAttributeHelper]::ProcessCustomAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
        if ($null -ne $MyInvocation.MyCommand -and [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets -notcontains $MyInvocation.MyCommand.Name -and [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.MessageAttributeHelper]::ContainsPreviewAttribute($cmdInfo, $MyInvocation)){
            [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.MessageAttributeHelper]::ProcessPreviewMessageAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets.Enqueue($MyInvocation.MyCommand.Name)
        }
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }

    finally {
        $backupTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        $backupInternalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
    }

}
end {
    try {
        $steppablePipeline.End()

        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $backupTelemetryId
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $backupInternalCalledCmdlets
        if ($preTelemetryId -eq '') {
            [Microsoft.Azure.PowerShell.Cmdlets.AksArc.module]::Instance.Telemetry.Invoke('Send', $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        }
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $preTelemetryId

    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
} 
}

<#
.Synopsis
Lists the supported VM skus for the specified custom location
.Description
Lists the supported VM skus for the specified custom location
.Example
Get-AzAksArcVMSku -CustomLocationName sample-cl-id
 
.Outputs
Microsoft.Azure.PowerShell.Cmdlets.AksArc.Models.IVMSkuProfile
.Link
https://learn.microsoft.com/powershell/module/az.aksarc/get-azaksarcvmsku
#>
function Get-AzAksArcVMSku {
[OutputType([Microsoft.Azure.PowerShell.Cmdlets.AksArc.Models.IVMSkuProfile])]
[CmdletBinding(DefaultParameterSetName='Get', PositionalBinding=$false)]
param(
    [Parameter(Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Path')]
    [System.String]
    # The name or id of the custom location.
    ${CustomLocationName},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Path')]
    [System.String]
    # The name of the resource group.
    # The name is case insensitive.
    ${ResourceGroupName},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.DefaultInfo(Script='(Get-AzContext).Subscription.Id')]
    [System.String]
    # The ID of the target subscription.
    ${SubscriptionId},

    [Parameter()]
    [Alias('AzureRMContext', 'AzureCredential')]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Azure')]
    [System.Management.Automation.PSObject]
    # The DefaultProfile parameter is not functional.
    # Use the SubscriptionId parameter when available if executing the cmdlet against a different subscription.
    ${DefaultProfile},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        if ($null -eq [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion) {
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion = $PSVersionTable.PSVersion.ToString()
        }         
        $preTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        if ($preTelemetryId -eq '') {
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId =(New-Guid).ToString()
            [Microsoft.Azure.PowerShell.Cmdlets.AksArc.module]::Instance.Telemetry.Invoke('Create', $MyInvocation, $parameterSet, $PSCmdlet)
        } else {
            $internalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
            if ($internalCalledCmdlets -eq '') {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $MyInvocation.MyCommand.Name
            } else {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets += ',' + $MyInvocation.MyCommand.Name
            }
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = 'internal'
        }

        $mapping = @{
            Get = 'Az.AksArc.custom\Get-AzAksArcVMSku';
        }
        if (('Get') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('SubscriptionId') ) {
            $testPlayback = $false
            $PSBoundParameters['HttpPipelinePrepend'] | Foreach-Object { if ($_) { $testPlayback = $testPlayback -or ('Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.PipelineMock' -eq $_.Target.GetType().FullName -and 'Playback' -eq $_.Target.Mode) } }
            if ($testPlayback) {
                $PSBoundParameters['SubscriptionId'] = . (Join-Path $PSScriptRoot '..' 'utils' 'Get-SubscriptionIdTestSafe.ps1')
            } else {
                $PSBoundParameters['SubscriptionId'] = (Get-AzContext).Subscription.Id
            }
        }
        $cmdInfo = Get-Command -Name $mapping[$parameterSet]
        [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.MessageAttributeHelper]::ProcessCustomAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
        if ($null -ne $MyInvocation.MyCommand -and [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets -notcontains $MyInvocation.MyCommand.Name -and [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.MessageAttributeHelper]::ContainsPreviewAttribute($cmdInfo, $MyInvocation)){
            [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.MessageAttributeHelper]::ProcessPreviewMessageAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets.Enqueue($MyInvocation.MyCommand.Name)
        }
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }

    finally {
        $backupTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        $backupInternalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
    }

}
end {
    try {
        $steppablePipeline.End()

        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $backupTelemetryId
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $backupInternalCalledCmdlets
        if ($preTelemetryId -eq '') {
            [Microsoft.Azure.PowerShell.Cmdlets.AksArc.module]::Instance.Telemetry.Invoke('Send', $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        }
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $preTelemetryId

    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
} 
}

<#
.Synopsis
Update the provisioned cluster instance
.Description
Update the provisioned cluster instance
.Example
Invoke-AzAksArcClusterUpgrade -ClusterName azps_test_cluster -ResourceGroupName azps_test_group
.Example
Invoke-AzAksArcClusterUpgrade -ClusterName azps_test_cluster -ResourceGroupName azps_test_group -KubernetesVersion "1.28.5"
 
.Outputs
Microsoft.Azure.PowerShell.Cmdlets.AksArc.Models.IProvisionedCluster
.Link
https://learn.microsoft.com/powershell/module/az.aksarc/invoke-azaksarcclusterupgrade
#>
function Invoke-AzAksArcClusterUpgrade {
[OutputType([Microsoft.Azure.PowerShell.Cmdlets.AksArc.Models.IProvisionedCluster])]
[CmdletBinding(DefaultParameterSetName='UpdateExpanded', PositionalBinding=$false, SupportsShouldProcess, ConfirmImpact='Medium')]
param(
    [Parameter(Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Path')]
    [System.String]
    # The name of the Kubernetes cluster on which get is called.
    ${ClusterName},

    [Parameter(Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Path')]
    [System.String]
    # The name of the resource group.
    # The name is case insensitive.
    ${ResourceGroupName},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.DefaultInfo(Script='(Get-AzContext).Subscription.Id')]
    [System.String]
    # The ID of the target subscription.
    ${SubscriptionId},

    [Parameter(ParameterSetName='Upgrade', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Body')]
    [System.String]
    # The version of Kubernetes in use by the provisioned cluster.
    ${KubernetesVersion},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Run the command as a job
    ${AsJob},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Run the command asynchronously
    ${NoWait},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        if ($null -eq [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion) {
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion = $PSVersionTable.PSVersion.ToString()
        }         
        $preTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        if ($preTelemetryId -eq '') {
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId =(New-Guid).ToString()
            [Microsoft.Azure.PowerShell.Cmdlets.AksArc.module]::Instance.Telemetry.Invoke('Create', $MyInvocation, $parameterSet, $PSCmdlet)
        } else {
            $internalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
            if ($internalCalledCmdlets -eq '') {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $MyInvocation.MyCommand.Name
            } else {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets += ',' + $MyInvocation.MyCommand.Name
            }
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = 'internal'
        }

        $mapping = @{
            UpdateExpanded = 'Az.AksArc.custom\Invoke-AzAksArcClusterUpgrade';
            Upgrade = 'Az.AksArc.custom\Invoke-AzAksArcClusterUpgrade';
        }
        if (('UpdateExpanded', 'Upgrade') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('SubscriptionId') ) {
            $testPlayback = $false
            $PSBoundParameters['HttpPipelinePrepend'] | Foreach-Object { if ($_) { $testPlayback = $testPlayback -or ('Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.PipelineMock' -eq $_.Target.GetType().FullName -and 'Playback' -eq $_.Target.Mode) } }
            if ($testPlayback) {
                $PSBoundParameters['SubscriptionId'] = . (Join-Path $PSScriptRoot '..' 'utils' 'Get-SubscriptionIdTestSafe.ps1')
            } else {
                $PSBoundParameters['SubscriptionId'] = (Get-AzContext).Subscription.Id
            }
        }
        $cmdInfo = Get-Command -Name $mapping[$parameterSet]
        [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.MessageAttributeHelper]::ProcessCustomAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
        if ($null -ne $MyInvocation.MyCommand -and [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets -notcontains $MyInvocation.MyCommand.Name -and [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.MessageAttributeHelper]::ContainsPreviewAttribute($cmdInfo, $MyInvocation)){
            [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.MessageAttributeHelper]::ProcessPreviewMessageAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets.Enqueue($MyInvocation.MyCommand.Name)
        }
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }

    finally {
        $backupTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        $backupInternalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
    }

}
end {
    try {
        $steppablePipeline.End()

        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $backupTelemetryId
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $backupInternalCalledCmdlets
        if ($preTelemetryId -eq '') {
            [Microsoft.Azure.PowerShell.Cmdlets.AksArc.module]::Instance.Telemetry.Invoke('Send', $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        }
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $preTelemetryId

    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
} 
}

<#
.Synopsis
Create the provisioned cluster instance
.Description
Create the provisioned cluster instance
.Example
New-AzAksArcCluster -ClusterName azps_test_cluster -ResourceGroupName azps_test_group -ControlPlaneCount 3
.Example
New-AzAksArcCluster -ClusterName azps_test_cluster -ResourceGroupName azps_test_group -EnableAutoScaling -MinCount 1 -MaxCount 5
.Example
New-AzAksArcCluster -ClusterName azps_test_cluster -ResourceGroupName azps_test_group -NfCsiDriverEnabled
.Example
New-AzAksArcCluster -ClusterName azps_test_cluster -ResourceGroupName azps_test_group -SmbCsiDriverEnabled
.Example
New-AzAksArcCluster -ClusterName azps_test_cluster -ResourceGroupName azps_test_group -EnableAzureHybridBenefit
.Example
New-AzAksArcCluster -ClusterName azps_test_cluster -ResourceGroupName azps_test_group -EnableAzureHybridBenefit:$false
.Example
New-AzAksArcCluster -ClusterName azps_test_cluster -ResourceGroupName azps_test_group -EnableAutoScaling:$false
.Example
New-AzAksArcCluster -ClusterName azps_test_cluster -ResourceGroupName azps_test_group -NfCsiDriverEnabled:$false
.Example
New-AzAksArcCluster -ClusterName azps_test_cluster -ResourceGroupName azps_test_group -SmbCsiDriverEnabled:$false
.Example
New-AzAksArcCluster -ClusterName azps_test_cluster -ResourceGroupName azps_test_group -AdminGroupObjectID @("2e00cb64-66d8-4c9c-92d8-6462caf99e33", "1b28ff4f-f7c5-4aaa-aa79-ba8b775ab443")
 
.Outputs
Microsoft.Azure.PowerShell.Cmdlets.AksArc.Models.IProvisionedCluster
.Link
https://learn.microsoft.com/powershell/module/az.aksarc/new-azaksarccluster
#>
function New-AzAksArcCluster {
[OutputType([Microsoft.Azure.PowerShell.Cmdlets.AksArc.Models.IProvisionedCluster])]
[CmdletBinding(DefaultParameterSetName='CreateExpanded', PositionalBinding=$false, SupportsShouldProcess, ConfirmImpact='Medium')]
param(
    [Parameter(Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Path')]
    [System.String]
    # The name of the Kubernetes cluster on which get is called.
    ${ClusterName},

    [Parameter(Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Path')]
    [System.String]
    # The name of the resource group.
    # The name is case insensitive.
    ${ResourceGroupName},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.DefaultInfo(Script='(Get-AzContext).Subscription.Id')]
    [System.String]
    # The ID of the target subscription.
    ${SubscriptionId},

    [Parameter(ParameterSetName='CreateExpanded')]
    [Parameter(ParameterSetName='AutoScaling', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Path')]
    [System.Int32]
    ${MinCount},

    [Parameter(ParameterSetName='CreateExpanded')]
    [Parameter(ParameterSetName='AutoScaling', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Path')]
    [System.Int32]
    ${MaxCount},

    [Parameter(ParameterSetName='CreateExpanded')]
    [Parameter(ParameterSetName='AutoScaling', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Path')]
    [System.Int32]
    ${MaxPod},

    [Parameter(Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Body')]
    [System.String]
    # ARM Id of the extended location.
    ${CustomLocationName},

    [Parameter(Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Body')]
    [System.String]
    # List of ARM resource Ids (maximum 1) for the infrastructure network object e.g.
    # /subscriptions/{subscriptionId}/resourceGroups/{resourceGroupName}/providers/Microsoft.AzureStackHCI/logicalNetworks/{logicalNetworkName}
    ${VnetId},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Body')]
    [System.String]
    # IP address of the Kubernetes API server
    ${ControlPlaneIP},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Body')]
    [System.String]
    # Location
    ${Location},

    [Parameter()]
    [AllowEmptyCollection()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Body')]
    [System.String[]]
    ${AdminGroupObjectID},

    [Parameter(ParameterSetName='CreateExpanded')]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Body')]
    [System.String]
    # IP Address or CIDR for SSH access to VMs in the provisioned cluster
    ${SshAuthIp},

    [Parameter(ParameterSetName='CreateExpanded')]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Body')]
    [System.Int32]
    # Number of control plane nodes.
    # The default value is 1, and the count should be an odd number
    ${ControlPlaneCount},

    [Parameter(ParameterSetName='CreateExpanded')]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Body')]
    [System.String]
    # VM sku size of the control plane nodes
    ${ControlPlaneVMSize},

    [Parameter(ParameterSetName='CreateExpanded')]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Body')]
    [System.String]
    # The version of Kubernetes in use by the provisioned cluster.
    ${KubernetesVersion},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Body')]
    [System.Management.Automation.SwitchParameter]
    # Indicates whether Azure Hybrid Benefit is opted in.
    # Default value is false
    ${EnableAzureHybridBenefit},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Body')]
    [System.Management.Automation.SwitchParameter]
    # Indicates whether azure rbac is enabled.
    # Default value is false
    ${EnableAzureRbac},

    [Parameter(ParameterSetName='CreateExpanded')]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Body')]
    [System.Int32]
    # Number of HA Proxy load balancer VMs.
    # The default value is 0.
    ${LoadBalancerCount},

    [Parameter(ParameterSetName='CreateExpanded')]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Body')]
    [System.String]
    # A CIDR notation IP Address range from which to assign pod IPs.
    ${PodCidr},

    [Parameter(ParameterSetName='CreateExpanded')]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Body')]
    [System.Management.Automation.SwitchParameter]
    # Indicates whether to enable NFS CSI Driver.
    # The default value is true.
    ${NfCsiDriverEnabled},

    [Parameter(ParameterSetName='CreateExpanded')]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Body')]
    [System.Management.Automation.SwitchParameter]
    # Indicates whether to enable SMB CSI Driver.
    # The default value is true.
    ${SmbCsiDriverEnabled},

    [Parameter(ParameterSetName='CreateExpanded')]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Body')]
    [System.String]
    # The list of SSH public keys used to authenticate with VMs.
    # A maximum of 1 key may be specified.
    ${SshKeyValue},

    [Parameter(ParameterSetName='CreateExpanded')]
    [Parameter(ParameterSetName='AutoScaling', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Body')]
    [System.Management.Automation.SwitchParameter]
    # Indicates whether to enable NFS CSI Driver.
    # The default value is true.
    ${EnableAutoScaling},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.Info(PossibleTypes=([Microsoft.Azure.PowerShell.Cmdlets.AksArc.Models.IAgentPoolProfileNodeLabels]))]
    [System.Collections.Hashtable]
    # The node labels to be persisted across all nodes in agent pool.
    ${NodeLabel},

    [Parameter()]
    [AllowEmptyCollection()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Body')]
    [System.String[]]
    # Taints added to new nodes during node pool create and scale.
    # For example, key=value:NoSchedule.
    ${NodeTaint},

    [Parameter(ParameterSetName='CreateExpanded')]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Body')]
    [System.String]
    # Valid values are 'true' and 'false'
    ${AutoScalerProfileBalanceSimilarNodeGroup},

    [Parameter(ParameterSetName='CreateExpanded')]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.PSArgumentCompleterAttribute("least-waste", "most-pods", "priority", "random")]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Body')]
    [System.String]
    # If not specified, the default is 'random'.
    # See [expanders](https://github.com/kubernetes/autoscaler/blob/master/cluster-autoscaler/FAQ.md#what-are-expanders) for more information.
    ${AutoScalerProfileExpander},

    [Parameter(ParameterSetName='CreateExpanded')]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Body')]
    [System.String]
    # The default is 10.
    ${AutoScalerProfileMaxEmptyBulkDelete},

    [Parameter(ParameterSetName='CreateExpanded')]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Body')]
    [System.String]
    # The default is 600.
    ${AutoScalerProfileMaxGracefulTerminationSec},

    [Parameter(ParameterSetName='CreateExpanded')]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Body')]
    [System.String]
    # The default is '15m'.
    # Values must be an integer followed by an 'm'.
    # No unit of time other than minutes (m) is supported.
    ${AutoScalerProfileMaxNodeProvisionTime},

    [Parameter(ParameterSetName='CreateExpanded')]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Body')]
    [System.String]
    # The default is 45.
    # The maximum is 100 and the minimum is 0.
    ${AutoScalerProfileMaxTotalUnreadyPercentage},

    [Parameter(ParameterSetName='CreateExpanded')]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Body')]
    [System.String]
    # For scenarios like burst/batch scale where you don't want CA to act before the kubernetes scheduler could schedule all the pods, you can tell CA to ignore unscheduled pods before they're a certain age.
    # The default is '0s'.
    # Values must be an integer followed by a unit ('s' for seconds, 'm' for minutes, 'h' for hours, etc).
    ${AutoScalerProfileNewPodScaleUpDelay},

    [Parameter(ParameterSetName='CreateExpanded')]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Body')]
    [System.String]
    # This must be an integer.
    # The default is 3.
    ${AutoScalerProfileOkTotalUnreadyCount},

    [Parameter(ParameterSetName='CreateExpanded')]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Body')]
    [System.String]
    # The default is '10m'.
    # Values must be an integer followed by an 'm'.
    # No unit of time other than minutes (m) is supported.
    ${AutoScalerProfileScaleDownDelayAfterAdd},

    [Parameter(ParameterSetName='CreateExpanded')]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Body')]
    [System.String]
    # The default is the scan-interval.
    # Values must be an integer followed by an 'm'.
    # No unit of time other than minutes (m) is supported.
    ${AutoScalerProfileScaleDownDelayAfterDelete},

    [Parameter(ParameterSetName='CreateExpanded')]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Body')]
    [System.String]
    # The default is '3m'.
    # Values must be an integer followed by an 'm'.
    # No unit of time other than minutes (m) is supported.
    ${AutoScalerProfileScaleDownDelayAfterFailure},

    [Parameter(ParameterSetName='CreateExpanded')]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Body')]
    [System.String]
    # The default is '10m'.
    # Values must be an integer followed by an 'm'.
    # No unit of time other than minutes (m) is supported.
    ${AutoScalerProfileScaleDownUnneededTime},

    [Parameter(ParameterSetName='CreateExpanded')]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Body')]
    [System.String]
    # The default is '20m'.
    # Values must be an integer followed by an 'm'.
    # No unit of time other than minutes (m) is supported.
    ${AutoScalerProfileScaleDownUnreadyTime},

    [Parameter(ParameterSetName='CreateExpanded')]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Body')]
    [System.String]
    # The default is '0.5'.
    ${AutoScalerProfileScaleDownUtilizationThreshold},

    [Parameter(ParameterSetName='CreateExpanded')]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Body')]
    [System.String]
    # The default is '10'.
    # Values must be an integer number of seconds.
    ${AutoScalerProfileScanInterval},

    [Parameter(ParameterSetName='CreateExpanded')]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Body')]
    [System.String]
    # The default is true.
    ${AutoScalerProfileSkipNodesWithLocalStorage},

    [Parameter(ParameterSetName='CreateExpanded')]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Body')]
    [System.String]
    # The default is true.
    ${AutoScalerProfileSkipNodesWithSystemPod},

    [Parameter(ParameterSetName='CreateViaJsonFilePath', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Body')]
    [System.String]
    # Path of Json file supplied to the Create operation
    ${JsonFilePath},

    [Parameter(ParameterSetName='CreateViaJsonString', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Body')]
    [System.String]
    # Json string supplied to the Create operation
    ${JsonString},

    [Parameter()]
    [Alias('AzureRMContext', 'AzureCredential')]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Azure')]
    [System.Management.Automation.PSObject]
    # The DefaultProfile parameter is not functional.
    # Use the SubscriptionId parameter when available if executing the cmdlet against a different subscription.
    ${DefaultProfile},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Run the command as a job
    ${AsJob},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Run the command asynchronously
    ${NoWait},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        if ($null -eq [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion) {
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion = $PSVersionTable.PSVersion.ToString()
        }         
        $preTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        if ($preTelemetryId -eq '') {
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId =(New-Guid).ToString()
            [Microsoft.Azure.PowerShell.Cmdlets.AksArc.module]::Instance.Telemetry.Invoke('Create', $MyInvocation, $parameterSet, $PSCmdlet)
        } else {
            $internalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
            if ($internalCalledCmdlets -eq '') {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $MyInvocation.MyCommand.Name
            } else {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets += ',' + $MyInvocation.MyCommand.Name
            }
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = 'internal'
        }

        $mapping = @{
            CreateExpanded = 'Az.AksArc.custom\New-AzAksArcCluster';
            AutoScaling = 'Az.AksArc.custom\New-AzAksArcCluster';
            CreateViaJsonFilePath = 'Az.AksArc.custom\New-AzAksArcCluster';
            CreateViaJsonString = 'Az.AksArc.custom\New-AzAksArcCluster';
        }
        if (('CreateExpanded', 'AutoScaling', 'CreateViaJsonFilePath', 'CreateViaJsonString') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('SubscriptionId') ) {
            $testPlayback = $false
            $PSBoundParameters['HttpPipelinePrepend'] | Foreach-Object { if ($_) { $testPlayback = $testPlayback -or ('Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.PipelineMock' -eq $_.Target.GetType().FullName -and 'Playback' -eq $_.Target.Mode) } }
            if ($testPlayback) {
                $PSBoundParameters['SubscriptionId'] = . (Join-Path $PSScriptRoot '..' 'utils' 'Get-SubscriptionIdTestSafe.ps1')
            } else {
                $PSBoundParameters['SubscriptionId'] = (Get-AzContext).Subscription.Id
            }
        }
        $cmdInfo = Get-Command -Name $mapping[$parameterSet]
        [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.MessageAttributeHelper]::ProcessCustomAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
        if ($null -ne $MyInvocation.MyCommand -and [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets -notcontains $MyInvocation.MyCommand.Name -and [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.MessageAttributeHelper]::ContainsPreviewAttribute($cmdInfo, $MyInvocation)){
            [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.MessageAttributeHelper]::ProcessPreviewMessageAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets.Enqueue($MyInvocation.MyCommand.Name)
        }
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }

    finally {
        $backupTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        $backupInternalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
    }

}
end {
    try {
        $steppablePipeline.End()

        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $backupTelemetryId
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $backupInternalCalledCmdlets
        if ($preTelemetryId -eq '') {
            [Microsoft.Azure.PowerShell.Cmdlets.AksArc.module]::Instance.Telemetry.Invoke('Send', $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        }
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $preTelemetryId

    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
} 
}

<#
.Synopsis
Create the agent pool in the provisioned cluster
.Description
Create the agent pool in the provisioned cluster
.Example
New-AzAksArcNodepool -ClusterName azps_test_cluster -ResourceGroupName azps_test_group -Name azps_test_nodepool_example
.Example
New-AzAksArcNodepool -ClusterName azps_test_cluster -ResourceGroupName azps_test_group -Name azps_test_nodepool_example -Count 3
 
.Inputs
Microsoft.Azure.PowerShell.Cmdlets.AksArc.Models.IAksArcIdentity
.Outputs
Microsoft.Azure.PowerShell.Cmdlets.AksArc.Models.IAgentPool
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
INPUTOBJECT <IAksArcIdentity>: Identity Parameter
  [AgentPoolName <String>]: Parameter for the name of the agent pool in the provisioned cluster.
  [ConnectedClusterResourceUri <String>]: The fully qualified Azure Resource Manager identifier of the connected cluster resource.
  [CustomLocationResourceUri <String>]: The fully qualified Azure Resource Manager identifier of the custom location resource.
  [Id <String>]: Resource identity path
  [ResourceGroupName <String>]: The name of the resource group. The name is case insensitive.
  [SubscriptionId <String>]: The ID of the target subscription. The value must be an UUID.
  [VirtualNetworkName <String>]: Parameter for the name of the virtual network
.Link
https://learn.microsoft.com/powershell/module/az.aksarc/new-azaksarcnodepool
#>
function New-AzAksArcNodepool {
[OutputType([Microsoft.Azure.PowerShell.Cmdlets.AksArc.Models.IAgentPool])]
[CmdletBinding(DefaultParameterSetName='CreateExpanded', PositionalBinding=$false, SupportsShouldProcess, ConfirmImpact='Medium')]
param(
    [Parameter(Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Path')]
    [System.String]
    # The name of the Kubernetes cluster on which get is called.
    ${ClusterName},

    [Parameter(Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Path')]
    [System.String]
    # The name of the resource group.
    # The name is case insensitive.
    ${ResourceGroupName},

    [Parameter(Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Path')]
    [System.String]
    # Parameter for the name of the agent pool in the provisioned cluster.
    ${Name},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.DefaultInfo(Script='(Get-AzContext).Subscription.Id')]
    [System.String]
    # The ID of the target subscription.
    ${SubscriptionId},

    [Parameter(ParameterSetName='CreateViaIdentityExpanded', Mandatory, ValueFromPipeline)]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Models.IAksArcIdentity]
    # Identity Parameter
    ${InputObject},

    [Parameter(ParameterSetName='CreateExpanded')]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Body')]
    [System.Int32]
    # Number of nodes in the agent pool.
    # The default value is 1.
    ${Count},

    [Parameter(ParameterSetName='CreateExpanded')]
    [Parameter(ParameterSetName='AutoScaling', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Body')]
    [System.Management.Automation.SwitchParameter]
    # Whether to enable auto-scaler.
    # Default value is false
    ${EnableAutoScaling},

    [Parameter(ParameterSetName='CreateExpanded')]
    [Parameter(ParameterSetName='AutoScaling', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Body')]
    [System.Int32]
    # The minimum number of nodes for auto-scaling
    ${MinCount},

    [Parameter(ParameterSetName='CreateExpanded')]
    [Parameter(ParameterSetName='AutoScaling', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Body')]
    [System.Int32]
    # The maximum number of nodes for auto-scaling
    ${MaxCount},

    [Parameter(ParameterSetName='CreateExpanded')]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Body')]
    [System.Int32]
    # The maximum number of pods that can run on a node.
    ${MaxPod},

    [Parameter(ParameterSetName='CreateExpanded')]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.Info(PossibleTypes=([Microsoft.Azure.PowerShell.Cmdlets.AksArc.Models.IAgentPoolProfileNodeLabels]))]
    [System.Collections.Hashtable]
    # The node labels to be persisted across all nodes in agent pool.
    ${NodeLabel},

    [Parameter(ParameterSetName='CreateExpanded')]
    [AllowEmptyCollection()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Body')]
    [System.String[]]
    # Taints added to new nodes during node pool create and scale.
    # For example, key=value:NoSchedule.
    ${NodeTaint},

    [Parameter(ParameterSetName='CreateExpanded')]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.PSArgumentCompleterAttribute("CBLMariner", "Windows2019", "Windows2022")]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Body')]
    [System.String]
    # Specifies the OS SKU used by the agent pool.
    # The default is CBLMariner if OSType is Linux.
    # The default is Windows2019 when OSType is Windows.
    ${OSSku},

    [Parameter(ParameterSetName='CreateExpanded')]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.PSArgumentCompleterAttribute("Windows", "Linux")]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Body')]
    [System.String]
    # The particular KubernetesVersion Image OS Type (Linux, Windows)
    ${OSType},

    [Parameter(ParameterSetName='CreateExpanded')]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.Info(PossibleTypes=([Microsoft.Azure.PowerShell.Cmdlets.AksArc.Models.IAgentPoolTags]))]
    [System.Collections.Hashtable]
    # Resource tags
    ${Tag},

    [Parameter(ParameterSetName='CreateExpanded')]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Body')]
    [System.String]
    # The VM sku size of the agent pool node VMs.
    ${VMSize},

    [Parameter(ParameterSetName='CreateViaJsonFilePath', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Body')]
    [System.String]
    # Path of Json file supplied to the Create operation
    ${JsonFilePath},

    [Parameter(ParameterSetName='CreateViaJsonString', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Body')]
    [System.String]
    # Json string supplied to the Create operation
    ${JsonString},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Run the command as a job
    ${AsJob},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Run the command asynchronously
    ${NoWait},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        if ($null -eq [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion) {
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion = $PSVersionTable.PSVersion.ToString()
        }         
        $preTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        if ($preTelemetryId -eq '') {
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId =(New-Guid).ToString()
            [Microsoft.Azure.PowerShell.Cmdlets.AksArc.module]::Instance.Telemetry.Invoke('Create', $MyInvocation, $parameterSet, $PSCmdlet)
        } else {
            $internalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
            if ($internalCalledCmdlets -eq '') {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $MyInvocation.MyCommand.Name
            } else {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets += ',' + $MyInvocation.MyCommand.Name
            }
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = 'internal'
        }

        $mapping = @{
            CreateExpanded = 'Az.AksArc.custom\New-AzAksArcNodepool';
            CreateViaIdentityExpanded = 'Az.AksArc.custom\New-AzAksArcNodepool';
            AutoScaling = 'Az.AksArc.custom\New-AzAksArcNodepool';
            CreateViaJsonFilePath = 'Az.AksArc.custom\New-AzAksArcNodepool';
            CreateViaJsonString = 'Az.AksArc.custom\New-AzAksArcNodepool';
        }
        if (('CreateExpanded', 'CreateViaIdentityExpanded', 'AutoScaling', 'CreateViaJsonFilePath', 'CreateViaJsonString') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('SubscriptionId') ) {
            $testPlayback = $false
            $PSBoundParameters['HttpPipelinePrepend'] | Foreach-Object { if ($_) { $testPlayback = $testPlayback -or ('Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.PipelineMock' -eq $_.Target.GetType().FullName -and 'Playback' -eq $_.Target.Mode) } }
            if ($testPlayback) {
                $PSBoundParameters['SubscriptionId'] = . (Join-Path $PSScriptRoot '..' 'utils' 'Get-SubscriptionIdTestSafe.ps1')
            } else {
                $PSBoundParameters['SubscriptionId'] = (Get-AzContext).Subscription.Id
            }
        }
        $cmdInfo = Get-Command -Name $mapping[$parameterSet]
        [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.MessageAttributeHelper]::ProcessCustomAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
        if ($null -ne $MyInvocation.MyCommand -and [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets -notcontains $MyInvocation.MyCommand.Name -and [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.MessageAttributeHelper]::ContainsPreviewAttribute($cmdInfo, $MyInvocation)){
            [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.MessageAttributeHelper]::ProcessPreviewMessageAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets.Enqueue($MyInvocation.MyCommand.Name)
        }
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }

    finally {
        $backupTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        $backupInternalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
    }

}
end {
    try {
        $steppablePipeline.End()

        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $backupTelemetryId
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $backupInternalCalledCmdlets
        if ($preTelemetryId -eq '') {
            [Microsoft.Azure.PowerShell.Cmdlets.AksArc.module]::Instance.Telemetry.Invoke('Send', $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        }
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $preTelemetryId

    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
} 
}

<#
.Synopsis
Create the virtual network resource
.Description
Create the virtual network resource
.Example
New-AzAksArcVirtualNetwork -Name "test-vnet-static" -ResourceGroupName "test-arcappliance-resgrp" -CustomLocationName "testcustomlocation" -MocVnetName "test-vnet"
 
.Outputs
Microsoft.Azure.PowerShell.Cmdlets.AksArc.Models.IVirtualNetwork
.Link
https://learn.microsoft.com/powershell/module/az.aksarc/new-azaksarcvirtualnetwork
#>
function New-AzAksArcVirtualNetwork {
[OutputType([Microsoft.Azure.PowerShell.Cmdlets.AksArc.Models.IVirtualNetwork])]
[CmdletBinding(DefaultParameterSetName='CreateExpanded', PositionalBinding=$false, SupportsShouldProcess, ConfirmImpact='Medium')]
param(
    [Parameter(Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Path')]
    [System.String]
    # Parameter for the name of the virtual network
    ${Name},

    [Parameter(Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Path')]
    [System.String]
    # The name of the resource group.
    # The name is case insensitive.
    ${ResourceGroupName},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.DefaultInfo(Script='(Get-AzContext).Subscription.Id')]
    [System.String]
    # The ID of the target subscription.
    # The value must be an UUID.
    ${SubscriptionId},

    [Parameter(ParameterSetName='CreateExpanded')]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Body')]
    [System.String]
    # The geo-location where the resource lives
    ${Location},

    [Parameter(ParameterSetName='CreateExpanded')]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Body')]
    [System.String]
    # ARM Id of the extended location.
    ${CustomLocationName},

    [Parameter(ParameterSetName='CreateExpanded')]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Body')]
    [System.String]
    # Group in MOC(Microsoft On-premises Cloud)
    ${MocGroup},

    [Parameter(ParameterSetName='CreateExpanded')]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Body')]
    [System.String]
    # Location in MOC(Microsoft On-premises Cloud)
    ${MocLocation},

    [Parameter(ParameterSetName='CreateExpanded')]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Body')]
    [System.String]
    # Virtual Network name in MOC(Microsoft On-premises Cloud)
    ${MocVnetName},

    [Parameter(ParameterSetName='CreateExpanded')]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.Info(PossibleTypes=([Microsoft.Azure.PowerShell.Cmdlets.AksArc.Models.ITrackedResourceTags]))]
    [System.Collections.Hashtable]
    # Resource tags.
    ${Tag},

    [Parameter(ParameterSetName='CreateViaJsonFilePath', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Body')]
    [System.String]
    # Path of Json file supplied to the Create operation
    ${JsonFilePath},

    [Parameter(ParameterSetName='CreateViaJsonString', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Body')]
    [System.String]
    # Json string supplied to the Create operation
    ${JsonString},

    [Parameter()]
    [Alias('AzureRMContext', 'AzureCredential')]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Azure')]
    [System.Management.Automation.PSObject]
    # The DefaultProfile parameter is not functional.
    # Use the SubscriptionId parameter when available if executing the cmdlet against a different subscription.
    ${DefaultProfile},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Run the command as a job
    ${AsJob},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Run the command asynchronously
    ${NoWait},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        if ($null -eq [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion) {
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion = $PSVersionTable.PSVersion.ToString()
        }         
        $preTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        if ($preTelemetryId -eq '') {
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId =(New-Guid).ToString()
            [Microsoft.Azure.PowerShell.Cmdlets.AksArc.module]::Instance.Telemetry.Invoke('Create', $MyInvocation, $parameterSet, $PSCmdlet)
        } else {
            $internalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
            if ($internalCalledCmdlets -eq '') {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $MyInvocation.MyCommand.Name
            } else {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets += ',' + $MyInvocation.MyCommand.Name
            }
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = 'internal'
        }

        $mapping = @{
            CreateExpanded = 'Az.AksArc.custom\New-AzAksArcVirtualNetwork';
            CreateViaJsonFilePath = 'Az.AksArc.custom\New-AzAksArcVirtualNetwork';
            CreateViaJsonString = 'Az.AksArc.custom\New-AzAksArcVirtualNetwork';
        }
        if (('CreateExpanded', 'CreateViaJsonFilePath', 'CreateViaJsonString') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('SubscriptionId') ) {
            $testPlayback = $false
            $PSBoundParameters['HttpPipelinePrepend'] | Foreach-Object { if ($_) { $testPlayback = $testPlayback -or ('Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.PipelineMock' -eq $_.Target.GetType().FullName -and 'Playback' -eq $_.Target.Mode) } }
            if ($testPlayback) {
                $PSBoundParameters['SubscriptionId'] = . (Join-Path $PSScriptRoot '..' 'utils' 'Get-SubscriptionIdTestSafe.ps1')
            } else {
                $PSBoundParameters['SubscriptionId'] = (Get-AzContext).Subscription.Id
            }
        }
        $cmdInfo = Get-Command -Name $mapping[$parameterSet]
        [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.MessageAttributeHelper]::ProcessCustomAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
        if ($null -ne $MyInvocation.MyCommand -and [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets -notcontains $MyInvocation.MyCommand.Name -and [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.MessageAttributeHelper]::ContainsPreviewAttribute($cmdInfo, $MyInvocation)){
            [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.MessageAttributeHelper]::ProcessPreviewMessageAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets.Enqueue($MyInvocation.MyCommand.Name)
        }
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }

    finally {
        $backupTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        $backupInternalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
    }

}
end {
    try {
        $steppablePipeline.End()

        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $backupTelemetryId
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $backupInternalCalledCmdlets
        if ($preTelemetryId -eq '') {
            [Microsoft.Azure.PowerShell.Cmdlets.AksArc.module]::Instance.Telemetry.Invoke('Send', $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        }
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $preTelemetryId

    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
} 
}

<#
.Synopsis
Deletes the provisioned cluster instance
.Description
Deletes the provisioned cluster instance
.Example
Remove-AzAksArcCluster -ClusterName azps_test_cluster -ResourceGroupName azps_test_group
 
.Outputs
System.Boolean
.Link
https://learn.microsoft.com/powershell/module/az.aksarc/remove-azaksarccluster
#>
function Remove-AzAksArcCluster {
[OutputType([System.Boolean])]
[CmdletBinding(DefaultParameterSetName='Delete', PositionalBinding=$false, SupportsShouldProcess, ConfirmImpact='Medium')]
param(
    [Parameter(Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Path')]
    [System.String]
    # The name of the Kubernetes cluster on which get is called.
    ${ClusterName},

    [Parameter(Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Path')]
    [System.String]
    # The name of the resource group.
    # The name is case insensitive.
    ${ResourceGroupName},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.DefaultInfo(Script='(Get-AzContext).Subscription.Id')]
    [System.String]
    # The ID of the target subscription.
    ${SubscriptionId},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Run the command as a job
    ${AsJob},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Run the command asynchronously
    ${NoWait},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Returns true when the command succeeds
    ${PassThru},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        if ($null -eq [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion) {
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion = $PSVersionTable.PSVersion.ToString()
        }         
        $preTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        if ($preTelemetryId -eq '') {
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId =(New-Guid).ToString()
            [Microsoft.Azure.PowerShell.Cmdlets.AksArc.module]::Instance.Telemetry.Invoke('Create', $MyInvocation, $parameterSet, $PSCmdlet)
        } else {
            $internalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
            if ($internalCalledCmdlets -eq '') {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $MyInvocation.MyCommand.Name
            } else {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets += ',' + $MyInvocation.MyCommand.Name
            }
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = 'internal'
        }

        $mapping = @{
            Delete = 'Az.AksArc.custom\Remove-AzAksArcCluster';
        }
        if (('Delete') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('SubscriptionId') ) {
            $testPlayback = $false
            $PSBoundParameters['HttpPipelinePrepend'] | Foreach-Object { if ($_) { $testPlayback = $testPlayback -or ('Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.PipelineMock' -eq $_.Target.GetType().FullName -and 'Playback' -eq $_.Target.Mode) } }
            if ($testPlayback) {
                $PSBoundParameters['SubscriptionId'] = . (Join-Path $PSScriptRoot '..' 'utils' 'Get-SubscriptionIdTestSafe.ps1')
            } else {
                $PSBoundParameters['SubscriptionId'] = (Get-AzContext).Subscription.Id
            }
        }
        $cmdInfo = Get-Command -Name $mapping[$parameterSet]
        [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.MessageAttributeHelper]::ProcessCustomAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
        if ($null -ne $MyInvocation.MyCommand -and [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets -notcontains $MyInvocation.MyCommand.Name -and [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.MessageAttributeHelper]::ContainsPreviewAttribute($cmdInfo, $MyInvocation)){
            [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.MessageAttributeHelper]::ProcessPreviewMessageAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets.Enqueue($MyInvocation.MyCommand.Name)
        }
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }

    finally {
        $backupTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        $backupInternalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
    }

}
end {
    try {
        $steppablePipeline.End()

        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $backupTelemetryId
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $backupInternalCalledCmdlets
        if ($preTelemetryId -eq '') {
            [Microsoft.Azure.PowerShell.Cmdlets.AksArc.module]::Instance.Telemetry.Invoke('Send', $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        }
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $preTelemetryId

    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
} 
}

<#
.Synopsis
Deletes the specified agent pool in the provisioned cluster
.Description
Deletes the specified agent pool in the provisioned cluster
.Example
Remove-AzAksArcNodepool -ClusterName azps_test_cluster -ResourceGroupName azps_test_group -Name azps_test_nodepool_example
 
.Inputs
Microsoft.Azure.PowerShell.Cmdlets.AksArc.Models.IAksArcIdentity
.Outputs
System.Boolean
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
INPUTOBJECT <IAksArcIdentity>: Identity Parameter
  [AgentPoolName <String>]: Parameter for the name of the agent pool in the provisioned cluster.
  [ConnectedClusterResourceUri <String>]: The fully qualified Azure Resource Manager identifier of the connected cluster resource.
  [CustomLocationResourceUri <String>]: The fully qualified Azure Resource Manager identifier of the custom location resource.
  [Id <String>]: Resource identity path
  [ResourceGroupName <String>]: The name of the resource group. The name is case insensitive.
  [SubscriptionId <String>]: The ID of the target subscription. The value must be an UUID.
  [VirtualNetworkName <String>]: Parameter for the name of the virtual network
.Link
https://learn.microsoft.com/powershell/module/az.aksarc/remove-azaksarcnodepool
#>
function Remove-AzAksArcNodepool {
[OutputType([System.Boolean])]
[CmdletBinding(DefaultParameterSetName='Delete', PositionalBinding=$false, SupportsShouldProcess, ConfirmImpact='Medium')]
param(
    [Parameter(Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Path')]
    [System.String]
    # The name of the Kubernetes cluster on which get is called.
    ${ClusterName},

    [Parameter(Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Path')]
    [System.String]
    # The name of the resource group.
    # The name is case insensitive.
    ${ResourceGroupName},

    [Parameter(ParameterSetName='Delete', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Path')]
    [System.String]
    # Parameter for the name of the agent pool in the provisioned cluster.
    ${Name},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.DefaultInfo(Script='(Get-AzContext).Subscription.Id')]
    [System.String]
    # The ID of the target subscription.
    ${SubscriptionId},

    [Parameter(ParameterSetName='DeleteViaIdentity', Mandatory, ValueFromPipeline)]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Models.IAksArcIdentity]
    # Identity Parameter
    ${InputObject},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Run the command as a job
    ${AsJob},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Run the command asynchronously
    ${NoWait},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Returns true when the command succeeds
    ${PassThru},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        if ($null -eq [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion) {
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion = $PSVersionTable.PSVersion.ToString()
        }         
        $preTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        if ($preTelemetryId -eq '') {
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId =(New-Guid).ToString()
            [Microsoft.Azure.PowerShell.Cmdlets.AksArc.module]::Instance.Telemetry.Invoke('Create', $MyInvocation, $parameterSet, $PSCmdlet)
        } else {
            $internalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
            if ($internalCalledCmdlets -eq '') {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $MyInvocation.MyCommand.Name
            } else {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets += ',' + $MyInvocation.MyCommand.Name
            }
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = 'internal'
        }

        $mapping = @{
            Delete = 'Az.AksArc.custom\Remove-AzAksArcNodepool';
            DeleteViaIdentity = 'Az.AksArc.custom\Remove-AzAksArcNodepool';
        }
        if (('Delete', 'DeleteViaIdentity') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('SubscriptionId') ) {
            $testPlayback = $false
            $PSBoundParameters['HttpPipelinePrepend'] | Foreach-Object { if ($_) { $testPlayback = $testPlayback -or ('Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.PipelineMock' -eq $_.Target.GetType().FullName -and 'Playback' -eq $_.Target.Mode) } }
            if ($testPlayback) {
                $PSBoundParameters['SubscriptionId'] = . (Join-Path $PSScriptRoot '..' 'utils' 'Get-SubscriptionIdTestSafe.ps1')
            } else {
                $PSBoundParameters['SubscriptionId'] = (Get-AzContext).Subscription.Id
            }
        }
        $cmdInfo = Get-Command -Name $mapping[$parameterSet]
        [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.MessageAttributeHelper]::ProcessCustomAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
        if ($null -ne $MyInvocation.MyCommand -and [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets -notcontains $MyInvocation.MyCommand.Name -and [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.MessageAttributeHelper]::ContainsPreviewAttribute($cmdInfo, $MyInvocation)){
            [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.MessageAttributeHelper]::ProcessPreviewMessageAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets.Enqueue($MyInvocation.MyCommand.Name)
        }
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }

    finally {
        $backupTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        $backupInternalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
    }

}
end {
    try {
        $steppablePipeline.End()

        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $backupTelemetryId
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $backupInternalCalledCmdlets
        if ($preTelemetryId -eq '') {
            [Microsoft.Azure.PowerShell.Cmdlets.AksArc.module]::Instance.Telemetry.Invoke('Send', $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        }
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $preTelemetryId

    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
} 
}

<#
.Synopsis
Update the provisioned cluster instance
.Description
Update the provisioned cluster instance
.Example
Update-AzAksArcCluster -ClusterName azps_test_cluster -ResourceGroupName azps_test_group -ControlPlaneCount 3
.Example
Update-AzAksArcCluster -ClusterName azps_test_cluster -ResourceGroupName azps_test_group -EnableAutoScaling -MinCount 1 -MaxCount 5
.Example
Update-AzAksArcCluster -ClusterName azps_test_cluster -ResourceGroupName azps_test_group -NfCsiDriverEnabled
.Example
Update-AzAksArcCluster -ClusterName azps_test_cluster -ResourceGroupName azps_test_group -SmbCsiDriverEnabled
.Example
Update-AzAksArcCluster -ClusterName azps_test_cluster -ResourceGroupName azps_test_group -EnableAzureHybridBenefit
.Example
Update-AzAksArcCluster -ClusterName azps_test_cluster -ResourceGroupName azps_test_group -EnableAzureHybridBenefit:$false
.Example
Update-AzAksArcCluster -ClusterName azps_test_cluster -ResourceGroupName azps_test_group -EnableAutoScaling:$false
.Example
Update-AzAksArcCluster -ClusterName azps_test_cluster -ResourceGroupName azps_test_group -NfCsiDriverEnabled:$false
.Example
Update-AzAksArcCluster -ClusterName azps_test_cluster -ResourceGroupName azps_test_group -SmbCsiDriverEnabled:$false
.Example
Update-AzAksArcCluster -ClusterName azps_test_cluster -ResourceGroupName azps_test_group -AdminGroupObjectID @("2e00cb64-66d8-4c9c-92d8-6462caf99e33", "1b28ff4f-f7c5-4aaa-aa79-ba8b775ab443")
 
.Outputs
Microsoft.Azure.PowerShell.Cmdlets.AksArc.Models.IProvisionedCluster
.Link
https://learn.microsoft.com/powershell/module/az.aksarc/update-azaksarccluster
#>
function Update-AzAksArcCluster {
[OutputType([Microsoft.Azure.PowerShell.Cmdlets.AksArc.Models.IProvisionedCluster])]
[CmdletBinding(DefaultParameterSetName='UpdateExpanded', PositionalBinding=$false, SupportsShouldProcess, ConfirmImpact='Medium')]
param(
    [Parameter(Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Path')]
    [System.String]
    # The name of the Kubernetes cluster on which get is called.
    ${ClusterName},

    [Parameter(Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Path')]
    [System.String]
    # The name of the resource group.
    # The name is case insensitive.
    ${ResourceGroupName},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.DefaultInfo(Script='(Get-AzContext).Subscription.Id')]
    [System.String]
    # The ID of the target subscription.
    ${SubscriptionId},

    [Parameter(ParameterSetName='AutoScaling', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Path')]
    [System.Int32]
    # Min nodes in autoscalar
    ${MinCount},

    [Parameter(ParameterSetName='AutoScaling', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Path')]
    [System.Int32]
    # Max nodes in autoscalar
    ${MaxCount},

    [Parameter()]
    [AllowEmptyCollection()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Body')]
    [System.String[]]
    ${AdminGroupObjectID},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Body')]
    [System.Management.Automation.SwitchParameter]
    # Indicates whether Azure Hybrid Benefit is opted in.
    # Default value is false
    ${EnableAzureHybridBenefit},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Body')]
    [System.Int32]
    # Number of control plane nodes.
    # The default value is 1, and the count should be an odd number
    ${ControlPlaneCount},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Body')]
    [System.Management.Automation.SwitchParameter]
    # Indicates whether to enable NFS CSI Driver.
    # The default value is true.
    ${NfCsiDriverEnabled},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Body')]
    [System.Management.Automation.SwitchParameter]
    # Indicates whether to enable SMB CSI Driver.
    # The default value is true.
    ${SmbCsiDriverEnabled},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Body')]
    [System.String]
    # Valid values are 'true' and 'false'
    ${AutoScalerProfileBalanceSimilarNodeGroup},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.PSArgumentCompleterAttribute("least-waste", "most-pods", "priority", "random")]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Body')]
    [System.String]
    # If not specified, the default is 'random'.
    # See [expanders](https://github.com/kubernetes/autoscaler/blob/master/cluster-autoscaler/FAQ.md#what-are-expanders) for more information.
    ${AutoScalerProfileExpander},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Body')]
    [System.String]
    # The default is 10.
    ${AutoScalerProfileMaxEmptyBulkDelete},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Body')]
    [System.String]
    # The default is 600.
    ${AutoScalerProfileMaxGracefulTerminationSec},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Body')]
    [System.String]
    # The default is '15m'.
    # Values must be an integer followed by an 'm'.
    # No unit of time other than minutes (m) is supported.
    ${AutoScalerProfileMaxNodeProvisionTime},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Body')]
    [System.String]
    # The default is 45.
    # The maximum is 100 and the minimum is 0.
    ${AutoScalerProfileMaxTotalUnreadyPercentage},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Body')]
    [System.String]
    # For scenarios like burst/batch scale where you don't want CA to act before the kubernetes scheduler could schedule all the pods, you can tell CA to ignore unscheduled pods before they're a certain age.
    # The default is '0s'.
    # Values must be an integer followed by a unit ('s' for seconds, 'm' for minutes, 'h' for hours, etc).
    ${AutoScalerProfileNewPodScaleUpDelay},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Body')]
    [System.String]
    # This must be an integer.
    # The default is 3.
    ${AutoScalerProfileOkTotalUnreadyCount},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Body')]
    [System.String]
    # The default is '10m'.
    # Values must be an integer followed by an 'm'.
    # No unit of time other than minutes (m) is supported.
    ${AutoScalerProfileScaleDownDelayAfterAdd},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Body')]
    [System.String]
    # The default is the scan-interval.
    # Values must be an integer followed by an 'm'.
    # No unit of time other than minutes (m) is supported.
    ${AutoScalerProfileScaleDownDelayAfterDelete},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Body')]
    [System.String]
    # The default is '3m'.
    # Values must be an integer followed by an 'm'.
    # No unit of time other than minutes (m) is supported.
    ${AutoScalerProfileScaleDownDelayAfterFailure},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Body')]
    [System.String]
    # The default is '10m'.
    # Values must be an integer followed by an 'm'.
    # No unit of time other than minutes (m) is supported.
    ${AutoScalerProfileScaleDownUnneededTime},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Body')]
    [System.String]
    # The default is '20m'.
    # Values must be an integer followed by an 'm'.
    # No unit of time other than minutes (m) is supported.
    ${AutoScalerProfileScaleDownUnreadyTime},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Body')]
    [System.String]
    # The default is '0.5'.
    ${AutoScalerProfileScaleDownUtilizationThreshold},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Body')]
    [System.String]
    # The default is '10'.
    # Values must be an integer number of seconds.
    ${AutoScalerProfileScanInterval},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Body')]
    [System.String]
    # The default is true.
    ${AutoScalerProfileSkipNodesWithLocalStorage},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Body')]
    [System.String]
    # The default is true.
    ${AutoScalerProfileSkipNodesWithSystemPod},

    [Parameter(ParameterSetName='AutoScaling', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Body')]
    [System.Management.Automation.SwitchParameter]
    # Indicates whether to enable autoscalar.
    # The default value is true.
    ${EnableAutoScaling},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Run the command as a job
    ${AsJob},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Run the command asynchronously
    ${NoWait},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        if ($null -eq [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion) {
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion = $PSVersionTable.PSVersion.ToString()
        }         
        $preTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        if ($preTelemetryId -eq '') {
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId =(New-Guid).ToString()
            [Microsoft.Azure.PowerShell.Cmdlets.AksArc.module]::Instance.Telemetry.Invoke('Create', $MyInvocation, $parameterSet, $PSCmdlet)
        } else {
            $internalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
            if ($internalCalledCmdlets -eq '') {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $MyInvocation.MyCommand.Name
            } else {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets += ',' + $MyInvocation.MyCommand.Name
            }
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = 'internal'
        }

        $mapping = @{
            UpdateExpanded = 'Az.AksArc.custom\Update-AzAksArcCluster';
            AutoScaling = 'Az.AksArc.custom\Update-AzAksArcCluster';
        }
        if (('UpdateExpanded', 'AutoScaling') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('SubscriptionId') ) {
            $testPlayback = $false
            $PSBoundParameters['HttpPipelinePrepend'] | Foreach-Object { if ($_) { $testPlayback = $testPlayback -or ('Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.PipelineMock' -eq $_.Target.GetType().FullName -and 'Playback' -eq $_.Target.Mode) } }
            if ($testPlayback) {
                $PSBoundParameters['SubscriptionId'] = . (Join-Path $PSScriptRoot '..' 'utils' 'Get-SubscriptionIdTestSafe.ps1')
            } else {
                $PSBoundParameters['SubscriptionId'] = (Get-AzContext).Subscription.Id
            }
        }
        $cmdInfo = Get-Command -Name $mapping[$parameterSet]
        [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.MessageAttributeHelper]::ProcessCustomAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
        if ($null -ne $MyInvocation.MyCommand -and [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets -notcontains $MyInvocation.MyCommand.Name -and [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.MessageAttributeHelper]::ContainsPreviewAttribute($cmdInfo, $MyInvocation)){
            [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.MessageAttributeHelper]::ProcessPreviewMessageAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets.Enqueue($MyInvocation.MyCommand.Name)
        }
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }

    finally {
        $backupTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        $backupInternalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
    }

}
end {
    try {
        $steppablePipeline.End()

        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $backupTelemetryId
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $backupInternalCalledCmdlets
        if ($preTelemetryId -eq '') {
            [Microsoft.Azure.PowerShell.Cmdlets.AksArc.module]::Instance.Telemetry.Invoke('Send', $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        }
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $preTelemetryId

    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
} 
}

<#
.Synopsis
Update the agent pool in the provisioned cluster
.Description
Update the agent pool in the provisioned cluster
.Example
Update-AzAksArcNodepool -ClusterName azps_test_cluster -ResourceGroupName azps_test_group -Name azps_test_nodepool_example -Count 3
.Example
Update-AzAksArcNodepool -ClusterName azps_test_cluster -ResourceGroupName azps_test_group -Name azps_test_nodepool_example -Tag @{'key1'= 1; 'key2'= 2}
.Example
Update-AzAksArcNodepool -ClusterName azps_test_cluster -ResourceGroupName azps_test_group -Name azps_test_nodepool_example -EnableAutoScaling -MinCount 1 -MaxCount 5
 
.Inputs
Microsoft.Azure.PowerShell.Cmdlets.AksArc.Models.IAksArcIdentity
.Outputs
Microsoft.Azure.PowerShell.Cmdlets.AksArc.Models.IAgentPool
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
INPUTOBJECT <IAksArcIdentity>: Identity Parameter
  [AgentPoolName <String>]: Parameter for the name of the agent pool in the provisioned cluster.
  [ConnectedClusterResourceUri <String>]: The fully qualified Azure Resource Manager identifier of the connected cluster resource.
  [CustomLocationResourceUri <String>]: The fully qualified Azure Resource Manager identifier of the custom location resource.
  [Id <String>]: Resource identity path
  [ResourceGroupName <String>]: The name of the resource group. The name is case insensitive.
  [SubscriptionId <String>]: The ID of the target subscription. The value must be an UUID.
  [VirtualNetworkName <String>]: Parameter for the name of the virtual network
.Link
https://learn.microsoft.com/powershell/module/az.aksarc/update-azaksarcnodepool
#>
function Update-AzAksArcNodepool {
[OutputType([Microsoft.Azure.PowerShell.Cmdlets.AksArc.Models.IAgentPool])]
[CmdletBinding(DefaultParameterSetName='UpdateExpanded', PositionalBinding=$false, SupportsShouldProcess, ConfirmImpact='Medium')]
param(
    [Parameter(Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Path')]
    [System.String]
    # The name of the Kubernetes cluster on which get is called.
    ${ClusterName},

    [Parameter(Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Path')]
    [System.String]
    # The name of the resource group.
    # The name is case insensitive.
    ${ResourceGroupName},

    [Parameter(Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Path')]
    [System.String]
    # Parameter for the name of the agent pool in the provisioned cluster.
    ${Name},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.DefaultInfo(Script='(Get-AzContext).Subscription.Id')]
    [System.String]
    # The ID of the target subscription.
    ${SubscriptionId},

    [Parameter(ParameterSetName='CreateViaIdentityExpanded', Mandatory, ValueFromPipeline)]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Models.IAksArcIdentity]
    # Identity Parameter
    ${InputObject},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Body')]
    [System.Int32]
    # Number of nodes in the agent pool.
    # The default value is 1.
    ${Count},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.Info(PossibleTypes=([Microsoft.Azure.PowerShell.Cmdlets.AksArc.Models.IAgentPoolProfileNodeLabels]))]
    [System.Collections.Hashtable]
    # The node labels to be persisted across all nodes in agent pool.
    ${NodeLabel},

    [Parameter()]
    [AllowEmptyCollection()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Body')]
    [System.String[]]
    # Taints added to new nodes during node pool create and scale.
    # For example, key=value:NoSchedule.
    ${NodeTaint},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Body')]
    [System.String]
    # The VM sku size of the agent pool node VMs.
    ${VMSize},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.Info(PossibleTypes=([Microsoft.Azure.PowerShell.Cmdlets.AksArc.Models.IAgentPoolTags]))]
    [System.Collections.Hashtable]
    # Resource tags
    ${Tag},

    [Parameter(ParameterSetName='AutoScaling', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Body')]
    [System.Management.Automation.SwitchParameter]
    # Whether to enable auto-scaler.
    # Default value is false
    ${EnableAutoScaling},

    [Parameter(ParameterSetName='AutoScaling', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Body')]
    [System.Int32]
    # The maximum number of nodes for auto-scaling
    ${MaxCount},

    [Parameter(ParameterSetName='AutoScaling', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Body')]
    [System.Int32]
    # The minimum number of nodes for auto-scaling
    ${MinCount},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Run the command as a job
    ${AsJob},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Run the command asynchronously
    ${NoWait},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        if ($null -eq [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion) {
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion = $PSVersionTable.PSVersion.ToString()
        }         
        $preTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        if ($preTelemetryId -eq '') {
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId =(New-Guid).ToString()
            [Microsoft.Azure.PowerShell.Cmdlets.AksArc.module]::Instance.Telemetry.Invoke('Create', $MyInvocation, $parameterSet, $PSCmdlet)
        } else {
            $internalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
            if ($internalCalledCmdlets -eq '') {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $MyInvocation.MyCommand.Name
            } else {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets += ',' + $MyInvocation.MyCommand.Name
            }
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = 'internal'
        }

        $mapping = @{
            UpdateExpanded = 'Az.AksArc.custom\Update-AzAksArcNodepool';
            CreateViaIdentityExpanded = 'Az.AksArc.custom\Update-AzAksArcNodepool';
            AutoScaling = 'Az.AksArc.custom\Update-AzAksArcNodepool';
        }
        if (('UpdateExpanded', 'CreateViaIdentityExpanded', 'AutoScaling') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('SubscriptionId') ) {
            $testPlayback = $false
            $PSBoundParameters['HttpPipelinePrepend'] | Foreach-Object { if ($_) { $testPlayback = $testPlayback -or ('Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.PipelineMock' -eq $_.Target.GetType().FullName -and 'Playback' -eq $_.Target.Mode) } }
            if ($testPlayback) {
                $PSBoundParameters['SubscriptionId'] = . (Join-Path $PSScriptRoot '..' 'utils' 'Get-SubscriptionIdTestSafe.ps1')
            } else {
                $PSBoundParameters['SubscriptionId'] = (Get-AzContext).Subscription.Id
            }
        }
        $cmdInfo = Get-Command -Name $mapping[$parameterSet]
        [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.MessageAttributeHelper]::ProcessCustomAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
        if ($null -ne $MyInvocation.MyCommand -and [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets -notcontains $MyInvocation.MyCommand.Name -and [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.MessageAttributeHelper]::ContainsPreviewAttribute($cmdInfo, $MyInvocation)){
            [Microsoft.Azure.PowerShell.Cmdlets.AksArc.Runtime.MessageAttributeHelper]::ProcessPreviewMessageAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets.Enqueue($MyInvocation.MyCommand.Name)
        }
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }

    finally {
        $backupTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        $backupInternalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
    }

}
end {
    try {
        $steppablePipeline.End()

        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $backupTelemetryId
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $backupInternalCalledCmdlets
        if ($preTelemetryId -eq '') {
            [Microsoft.Azure.PowerShell.Cmdlets.AksArc.module]::Instance.Telemetry.Invoke('Send', $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        }
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $preTelemetryId

    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
} 
}

# SIG # Begin signature block
# MIIoPAYJKoZIhvcNAQcCoIIoLTCCKCkCAQExDzANBglghkgBZQMEAgEFADB5Bgor
# BgEEAYI3AgEEoGswaTA0BgorBgEEAYI3AgEeMCYCAwEAAAQQH8w7YFlLCE63JNLG
# KX7zUQIBAAIBAAIBAAIBAAIBADAxMA0GCWCGSAFlAwQCAQUABCAWV/40bMdAMn9l
# aF8WqJ5UDYq2M0qkibw4NOYwXTjL8qCCDYUwggYDMIID66ADAgECAhMzAAAEA73V
# lV0POxitAAAAAAQDMA0GCSqGSIb3DQEBCwUAMH4xCzAJBgNVBAYTAlVTMRMwEQYD
# VQQIEwpXYXNoaW5ndG9uMRAwDgYDVQQHEwdSZWRtb25kMR4wHAYDVQQKExVNaWNy
# b3NvZnQgQ29ycG9yYXRpb24xKDAmBgNVBAMTH01pY3Jvc29mdCBDb2RlIFNpZ25p
# bmcgUENBIDIwMTEwHhcNMjQwOTEyMjAxMTEzWhcNMjUwOTExMjAxMTEzWjB0MQsw
# CQYDVQQGEwJVUzETMBEGA1UECBMKV2FzaGluZ3RvbjEQMA4GA1UEBxMHUmVkbW9u
# ZDEeMBwGA1UEChMVTWljcm9zb2Z0IENvcnBvcmF0aW9uMR4wHAYDVQQDExVNaWNy
# b3NvZnQgQ29ycG9yYXRpb24wggEiMA0GCSqGSIb3DQEBAQUAA4IBDwAwggEKAoIB
# AQCfdGddwIOnbRYUyg03O3iz19XXZPmuhEmW/5uyEN+8mgxl+HJGeLGBR8YButGV
# LVK38RxcVcPYyFGQXcKcxgih4w4y4zJi3GvawLYHlsNExQwz+v0jgY/aejBS2EJY
# oUhLVE+UzRihV8ooxoftsmKLb2xb7BoFS6UAo3Zz4afnOdqI7FGoi7g4vx/0MIdi
# kwTn5N56TdIv3mwfkZCFmrsKpN0zR8HD8WYsvH3xKkG7u/xdqmhPPqMmnI2jOFw/
# /n2aL8W7i1Pasja8PnRXH/QaVH0M1nanL+LI9TsMb/enWfXOW65Gne5cqMN9Uofv
# ENtdwwEmJ3bZrcI9u4LZAkujAgMBAAGjggGCMIIBfjAfBgNVHSUEGDAWBgorBgEE
# AYI3TAgBBggrBgEFBQcDAzAdBgNVHQ4EFgQU6m4qAkpz4641iK2irF8eWsSBcBkw
# VAYDVR0RBE0wS6RJMEcxLTArBgNVBAsTJE1pY3Jvc29mdCBJcmVsYW5kIE9wZXJh
# dGlvbnMgTGltaXRlZDEWMBQGA1UEBRMNMjMwMDEyKzUwMjkyNjAfBgNVHSMEGDAW
# gBRIbmTlUAXTgqoXNzcitW2oynUClTBUBgNVHR8ETTBLMEmgR6BFhkNodHRwOi8v
# d3d3Lm1pY3Jvc29mdC5jb20vcGtpb3BzL2NybC9NaWNDb2RTaWdQQ0EyMDExXzIw
# MTEtMDctMDguY3JsMGEGCCsGAQUFBwEBBFUwUzBRBggrBgEFBQcwAoZFaHR0cDov
# L3d3dy5taWNyb3NvZnQuY29tL3BraW9wcy9jZXJ0cy9NaWNDb2RTaWdQQ0EyMDEx
# XzIwMTEtMDctMDguY3J0MAwGA1UdEwEB/wQCMAAwDQYJKoZIhvcNAQELBQADggIB
# AFFo/6E4LX51IqFuoKvUsi80QytGI5ASQ9zsPpBa0z78hutiJd6w154JkcIx/f7r
# EBK4NhD4DIFNfRiVdI7EacEs7OAS6QHF7Nt+eFRNOTtgHb9PExRy4EI/jnMwzQJV
# NokTxu2WgHr/fBsWs6G9AcIgvHjWNN3qRSrhsgEdqHc0bRDUf8UILAdEZOMBvKLC
# rmf+kJPEvPldgK7hFO/L9kmcVe67BnKejDKO73Sa56AJOhM7CkeATrJFxO9GLXos
# oKvrwBvynxAg18W+pagTAkJefzneuWSmniTurPCUE2JnvW7DalvONDOtG01sIVAB
# +ahO2wcUPa2Zm9AiDVBWTMz9XUoKMcvngi2oqbsDLhbK+pYrRUgRpNt0y1sxZsXO
# raGRF8lM2cWvtEkV5UL+TQM1ppv5unDHkW8JS+QnfPbB8dZVRyRmMQ4aY/tx5x5+
# sX6semJ//FbiclSMxSI+zINu1jYerdUwuCi+P6p7SmQmClhDM+6Q+btE2FtpsU0W
# +r6RdYFf/P+nK6j2otl9Nvr3tWLu+WXmz8MGM+18ynJ+lYbSmFWcAj7SYziAfT0s
# IwlQRFkyC71tsIZUhBHtxPliGUu362lIO0Lpe0DOrg8lspnEWOkHnCT5JEnWCbzu
# iVt8RX1IV07uIveNZuOBWLVCzWJjEGa+HhaEtavjy6i7MIIHejCCBWKgAwIBAgIK
# YQ6Q0gAAAAAAAzANBgkqhkiG9w0BAQsFADCBiDELMAkGA1UEBhMCVVMxEzARBgNV
# BAgTCldhc2hpbmd0b24xEDAOBgNVBAcTB1JlZG1vbmQxHjAcBgNVBAoTFU1pY3Jv
# c29mdCBDb3Jwb3JhdGlvbjEyMDAGA1UEAxMpTWljcm9zb2Z0IFJvb3QgQ2VydGlm
# aWNhdGUgQXV0aG9yaXR5IDIwMTEwHhcNMTEwNzA4MjA1OTA5WhcNMjYwNzA4MjEw
# OTA5WjB+MQswCQYDVQQGEwJVUzETMBEGA1UECBMKV2FzaGluZ3RvbjEQMA4GA1UE
# BxMHUmVkbW9uZDEeMBwGA1UEChMVTWljcm9zb2Z0IENvcnBvcmF0aW9uMSgwJgYD
# VQQDEx9NaWNyb3NvZnQgQ29kZSBTaWduaW5nIFBDQSAyMDExMIICIjANBgkqhkiG
# 9w0BAQEFAAOCAg8AMIICCgKCAgEAq/D6chAcLq3YbqqCEE00uvK2WCGfQhsqa+la
# UKq4BjgaBEm6f8MMHt03a8YS2AvwOMKZBrDIOdUBFDFC04kNeWSHfpRgJGyvnkmc
# 6Whe0t+bU7IKLMOv2akrrnoJr9eWWcpgGgXpZnboMlImEi/nqwhQz7NEt13YxC4D
# dato88tt8zpcoRb0RrrgOGSsbmQ1eKagYw8t00CT+OPeBw3VXHmlSSnnDb6gE3e+
# lD3v++MrWhAfTVYoonpy4BI6t0le2O3tQ5GD2Xuye4Yb2T6xjF3oiU+EGvKhL1nk
# kDstrjNYxbc+/jLTswM9sbKvkjh+0p2ALPVOVpEhNSXDOW5kf1O6nA+tGSOEy/S6
# A4aN91/w0FK/jJSHvMAhdCVfGCi2zCcoOCWYOUo2z3yxkq4cI6epZuxhH2rhKEmd
# X4jiJV3TIUs+UsS1Vz8kA/DRelsv1SPjcF0PUUZ3s/gA4bysAoJf28AVs70b1FVL
# 5zmhD+kjSbwYuER8ReTBw3J64HLnJN+/RpnF78IcV9uDjexNSTCnq47f7Fufr/zd
# sGbiwZeBe+3W7UvnSSmnEyimp31ngOaKYnhfsi+E11ecXL93KCjx7W3DKI8sj0A3
# T8HhhUSJxAlMxdSlQy90lfdu+HggWCwTXWCVmj5PM4TasIgX3p5O9JawvEagbJjS
# 4NaIjAsCAwEAAaOCAe0wggHpMBAGCSsGAQQBgjcVAQQDAgEAMB0GA1UdDgQWBBRI
# bmTlUAXTgqoXNzcitW2oynUClTAZBgkrBgEEAYI3FAIEDB4KAFMAdQBiAEMAQTAL
# BgNVHQ8EBAMCAYYwDwYDVR0TAQH/BAUwAwEB/zAfBgNVHSMEGDAWgBRyLToCMZBD
# uRQFTuHqp8cx0SOJNDBaBgNVHR8EUzBRME+gTaBLhklodHRwOi8vY3JsLm1pY3Jv
# c29mdC5jb20vcGtpL2NybC9wcm9kdWN0cy9NaWNSb29DZXJBdXQyMDExXzIwMTFf
# MDNfMjIuY3JsMF4GCCsGAQUFBwEBBFIwUDBOBggrBgEFBQcwAoZCaHR0cDovL3d3
# dy5taWNyb3NvZnQuY29tL3BraS9jZXJ0cy9NaWNSb29DZXJBdXQyMDExXzIwMTFf
# MDNfMjIuY3J0MIGfBgNVHSAEgZcwgZQwgZEGCSsGAQQBgjcuAzCBgzA/BggrBgEF
# BQcCARYzaHR0cDovL3d3dy5taWNyb3NvZnQuY29tL3BraW9wcy9kb2NzL3ByaW1h
# cnljcHMuaHRtMEAGCCsGAQUFBwICMDQeMiAdAEwAZQBnAGEAbABfAHAAbwBsAGkA
# YwB5AF8AcwB0AGEAdABlAG0AZQBuAHQALiAdMA0GCSqGSIb3DQEBCwUAA4ICAQBn
# 8oalmOBUeRou09h0ZyKbC5YR4WOSmUKWfdJ5DJDBZV8uLD74w3LRbYP+vj/oCso7
# v0epo/Np22O/IjWll11lhJB9i0ZQVdgMknzSGksc8zxCi1LQsP1r4z4HLimb5j0b
# pdS1HXeUOeLpZMlEPXh6I/MTfaaQdION9MsmAkYqwooQu6SpBQyb7Wj6aC6VoCo/
# KmtYSWMfCWluWpiW5IP0wI/zRive/DvQvTXvbiWu5a8n7dDd8w6vmSiXmE0OPQvy
# CInWH8MyGOLwxS3OW560STkKxgrCxq2u5bLZ2xWIUUVYODJxJxp/sfQn+N4sOiBp
# mLJZiWhub6e3dMNABQamASooPoI/E01mC8CzTfXhj38cbxV9Rad25UAqZaPDXVJi
# hsMdYzaXht/a8/jyFqGaJ+HNpZfQ7l1jQeNbB5yHPgZ3BtEGsXUfFL5hYbXw3MYb
# BL7fQccOKO7eZS/sl/ahXJbYANahRr1Z85elCUtIEJmAH9AAKcWxm6U/RXceNcbS
# oqKfenoi+kiVH6v7RyOA9Z74v2u3S5fi63V4GuzqN5l5GEv/1rMjaHXmr/r8i+sL
# gOppO6/8MO0ETI7f33VtY5E90Z1WTk+/gFcioXgRMiF670EKsT/7qMykXcGhiJtX
# cVZOSEXAQsmbdlsKgEhr/Xmfwb1tbWrJUnMTDXpQzTGCGg0wghoJAgEBMIGVMH4x
# CzAJBgNVBAYTAlVTMRMwEQYDVQQIEwpXYXNoaW5ndG9uMRAwDgYDVQQHEwdSZWRt
# b25kMR4wHAYDVQQKExVNaWNyb3NvZnQgQ29ycG9yYXRpb24xKDAmBgNVBAMTH01p
# Y3Jvc29mdCBDb2RlIFNpZ25pbmcgUENBIDIwMTECEzMAAAQDvdWVXQ87GK0AAAAA
# BAMwDQYJYIZIAWUDBAIBBQCgga4wGQYJKoZIhvcNAQkDMQwGCisGAQQBgjcCAQQw
# HAYKKwYBBAGCNwIBCzEOMAwGCisGAQQBgjcCARUwLwYJKoZIhvcNAQkEMSIEIOlW
# mlhDOgrZJH9LPZFYnmv0WuH47DuggNtrE74bJmVTMEIGCisGAQQBgjcCAQwxNDAy
# oBSAEgBNAGkAYwByAG8AcwBvAGYAdKEagBhodHRwOi8vd3d3Lm1pY3Jvc29mdC5j
# b20wDQYJKoZIhvcNAQEBBQAEggEAO7DbVaqzCg2TIuV16kqIP/p3ofN2QDMx1U61
# nYfd8kFNJXYfqGX9D/wHEBd6ZO1Na1aVkWzqkZl6yKAxT+m6j/+TlSnbNYzymZpr
# Lk6GBA5p7q06SjvRJDX+ToqjtYFNGLvrJJiB9xYr5wP7w8vKkHuB/SV3Qli7JFRV
# vy7H+m7gcPjsp1Sg/3/tqVH4IRSD4K/vNyi3LrgmBxuoFafJGObeu/TcLCDI/vC9
# reCrSOzku+ze6kPE3jzVHh7YpFmQ4pKz0ABWcQZ/fWawQeBYM2u57MTgAifNwHWG
# FgHugOi4pc4dGSjWnQxY6023fxLmqO/X3kNZ+X1sG4iRvGF5hKGCF5cwgheTBgor
# BgEEAYI3AwMBMYIXgzCCF38GCSqGSIb3DQEHAqCCF3AwghdsAgEDMQ8wDQYJYIZI
# AWUDBAIBBQAwggFSBgsqhkiG9w0BCRABBKCCAUEEggE9MIIBOQIBAQYKKwYBBAGE
# WQoDATAxMA0GCWCGSAFlAwQCAQUABCBVA2MnmHezNY1OwfykszLG1uUo5OxxQeIh
# yoQTsqt0QAIGZxqQL+twGBMyMDI0MTEwMTE1MDQxNi44NjNaMASAAgH0oIHRpIHO
# MIHLMQswCQYDVQQGEwJVUzETMBEGA1UECBMKV2FzaGluZ3RvbjEQMA4GA1UEBxMH
# UmVkbW9uZDEeMBwGA1UEChMVTWljcm9zb2Z0IENvcnBvcmF0aW9uMSUwIwYDVQQL
# ExxNaWNyb3NvZnQgQW1lcmljYSBPcGVyYXRpb25zMScwJQYDVQQLEx5uU2hpZWxk
# IFRTUyBFU046MzMwMy0wNUUwLUQ5NDcxJTAjBgNVBAMTHE1pY3Jvc29mdCBUaW1l
# LVN0YW1wIFNlcnZpY2WgghHtMIIHIDCCBQigAwIBAgITMwAAAebZQp7qAPh94QAB
# AAAB5jANBgkqhkiG9w0BAQsFADB8MQswCQYDVQQGEwJVUzETMBEGA1UECBMKV2Fz
# aGluZ3RvbjEQMA4GA1UEBxMHUmVkbW9uZDEeMBwGA1UEChMVTWljcm9zb2Z0IENv
# cnBvcmF0aW9uMSYwJAYDVQQDEx1NaWNyb3NvZnQgVGltZS1TdGFtcCBQQ0EgMjAx
# MDAeFw0yMzEyMDYxODQ1MTVaFw0yNTAzMDUxODQ1MTVaMIHLMQswCQYDVQQGEwJV
# UzETMBEGA1UECBMKV2FzaGluZ3RvbjEQMA4GA1UEBxMHUmVkbW9uZDEeMBwGA1UE
# ChMVTWljcm9zb2Z0IENvcnBvcmF0aW9uMSUwIwYDVQQLExxNaWNyb3NvZnQgQW1l
# cmljYSBPcGVyYXRpb25zMScwJQYDVQQLEx5uU2hpZWxkIFRTUyBFU046MzMwMy0w
# NUUwLUQ5NDcxJTAjBgNVBAMTHE1pY3Jvc29mdCBUaW1lLVN0YW1wIFNlcnZpY2Uw
# ggIiMA0GCSqGSIb3DQEBAQUAA4ICDwAwggIKAoICAQC9vph84tgluEzm/wpNKlAj
# cElGzflvKADZ1D+2d/ieYYEtF2HKMrKGFDOLpLWWG5DEyiKblYKrE2nt540OGu35
# Zx0gXJBE0zWanZEAjCjt4eGBi+uakZsk70zHTQHHyfP+B3m2BSSNFPhgsVIPp6vo
# /9t6OeNezIwX5E5+VwEG37nZgEexQF2fQZYbxQ1AauqDvRdXsSpK1dh1UBt9EaMs
# zuucaR5nMwQN6sDjG99FzdK9Atzbn4SmlsoLUtRAh/768sKd0Y1hMmKVHwIX8/4J
# uURUBRZ0JWu0NYQBp8khku18Q8CAQ500tFB7VH3pD8zoA4lcA7JkxTGoPKrufm+l
# RZAA4iMgbcLZ2P/xSdnKFxU8vL31RoNlZJiGL5MqTXvvyBLz+MRP4En9Nye1N8x/
# lJD1stdNo5wJG+mgXsE/zfzg2GaVqQczFHg0Nl8bpIqnNFUReQRq3C1jVYMCSceg
# NzHeYtw5OmZ/7eVnRmjXlCsLvdsxOzc1YVn6nZLkQD5y31HYrB9iIHuswhaMv2hJ
# NNjVndkpWy934PIZuWTMk360kjXPFwl2Wv1Tzm9tOrCq8+l408KIL6J+efoGNkR8
# YB3M+u1tYeVDO/TcObGHxaGFB6QZxAUpnfB5N/MmBNxMOqzG1N8QiwW8gtjjMJiF
# Bf6iYYrCjtRwF7IPdQLFtQIDAQABo4IBSTCCAUUwHQYDVR0OBBYEFOUEMXntN54+
# 11ZM+Qu7Q5rg3Fc9MB8GA1UdIwQYMBaAFJ+nFV0AXmJdg/Tl0mWnG1M1GelyMF8G
# A1UdHwRYMFYwVKBSoFCGTmh0dHA6Ly93d3cubWljcm9zb2Z0LmNvbS9wa2lvcHMv
# Y3JsL01pY3Jvc29mdCUyMFRpbWUtU3RhbXAlMjBQQ0ElMjAyMDEwKDEpLmNybDBs
# BggrBgEFBQcBAQRgMF4wXAYIKwYBBQUHMAKGUGh0dHA6Ly93d3cubWljcm9zb2Z0
# LmNvbS9wa2lvcHMvY2VydHMvTWljcm9zb2Z0JTIwVGltZS1TdGFtcCUyMFBDQSUy
# MDIwMTAoMSkuY3J0MAwGA1UdEwEB/wQCMAAwFgYDVR0lAQH/BAwwCgYIKwYBBQUH
# AwgwDgYDVR0PAQH/BAQDAgeAMA0GCSqGSIb3DQEBCwUAA4ICAQBhbuogTapRsuwS
# kaFMQ6dyu8ZCYUpWQ8iIrbi40tU2hK6pHgu0hj0z/9zFRRx5DfhukjvbjA/dS5VY
# fxz1EIbPlt897MJ2sBGO2YLYwYelfJpDwbB0XS9Zkrqpzq6X/lmDQDn3G5vcYpYQ
# CJ55LLvyFlJ195AVo4Wy8UX5p7g9W3MgNHQMpM+EV64+cszj4Ho5aQmeKGtKy7w7
# 2eRY/vWDuptrvzruFNmKCIt12UcA5BOsXp1Ptkjx2yRsCj77DSml0zVYjqW/ISWk
# rGjyeVJ+khzctxaLkklVwCxigokD6fkWby0hCEKTOTPMzhugPIAcxcHsR2sx01YR
# a9pH2zvddsuBEfSFG6Cj0QSvEZ/M9mJ+h4miaQSR7AEbVGDbyRKkYn80S+3AmRlh
# 3ZOe+BFqJ57OXdeIDSHbvHzJ7oTqG896l3eUhPsZg69fNgxTxlvRNmRE/+61Yj7Z
# 1uB0XYQP60rsMLdTlVYEyZUl5MLTL5LvqFozZlS2Xoji4BEP6ddVTzmHJ4odOZMW
# TTeQ0IwnWG98vWv/roPegCr1G61FVrdXLE3AXIft4ZN4ZkDTnoAhPw7DZNPRlSW4
# TbVj/Lw0XvnLYNwMUA9ouY/wx9teTaJ8vTkbgYyaOYKFz6rNRXZ4af6e3IXwMCff
# CaspKUXC72YMu5W8L/zyTxsNUEgBbTCCB3EwggVZoAMCAQICEzMAAAAVxedrngKb
# SZkAAAAAABUwDQYJKoZIhvcNAQELBQAwgYgxCzAJBgNVBAYTAlVTMRMwEQYDVQQI
# EwpXYXNoaW5ndG9uMRAwDgYDVQQHEwdSZWRtb25kMR4wHAYDVQQKExVNaWNyb3Nv
# ZnQgQ29ycG9yYXRpb24xMjAwBgNVBAMTKU1pY3Jvc29mdCBSb290IENlcnRpZmlj
# YXRlIEF1dGhvcml0eSAyMDEwMB4XDTIxMDkzMDE4MjIyNVoXDTMwMDkzMDE4MzIy
# NVowfDELMAkGA1UEBhMCVVMxEzARBgNVBAgTCldhc2hpbmd0b24xEDAOBgNVBAcT
# B1JlZG1vbmQxHjAcBgNVBAoTFU1pY3Jvc29mdCBDb3Jwb3JhdGlvbjEmMCQGA1UE
# AxMdTWljcm9zb2Z0IFRpbWUtU3RhbXAgUENBIDIwMTAwggIiMA0GCSqGSIb3DQEB
# AQUAA4ICDwAwggIKAoICAQDk4aZM57RyIQt5osvXJHm9DtWC0/3unAcH0qlsTnXI
# yjVX9gF/bErg4r25PhdgM/9cT8dm95VTcVrifkpa/rg2Z4VGIwy1jRPPdzLAEBjo
# YH1qUoNEt6aORmsHFPPFdvWGUNzBRMhxXFExN6AKOG6N7dcP2CZTfDlhAnrEqv1y
# aa8dq6z2Nr41JmTamDu6GnszrYBbfowQHJ1S/rboYiXcag/PXfT+jlPP1uyFVk3v
# 3byNpOORj7I5LFGc6XBpDco2LXCOMcg1KL3jtIckw+DJj361VI/c+gVVmG1oO5pG
# ve2krnopN6zL64NF50ZuyjLVwIYwXE8s4mKyzbnijYjklqwBSru+cakXW2dg3viS
# kR4dPf0gz3N9QZpGdc3EXzTdEonW/aUgfX782Z5F37ZyL9t9X4C626p+Nuw2TPYr
# bqgSUei/BQOj0XOmTTd0lBw0gg/wEPK3Rxjtp+iZfD9M269ewvPV2HM9Q07BMzlM
# jgK8QmguEOqEUUbi0b1qGFphAXPKZ6Je1yh2AuIzGHLXpyDwwvoSCtdjbwzJNmSL
# W6CmgyFdXzB0kZSU2LlQ+QuJYfM2BjUYhEfb3BvR/bLUHMVr9lxSUV0S2yW6r1AF
# emzFER1y7435UsSFF5PAPBXbGjfHCBUYP3irRbb1Hode2o+eFnJpxq57t7c+auIu
# rQIDAQABo4IB3TCCAdkwEgYJKwYBBAGCNxUBBAUCAwEAATAjBgkrBgEEAYI3FQIE
# FgQUKqdS/mTEmr6CkTxGNSnPEP8vBO4wHQYDVR0OBBYEFJ+nFV0AXmJdg/Tl0mWn
# G1M1GelyMFwGA1UdIARVMFMwUQYMKwYBBAGCN0yDfQEBMEEwPwYIKwYBBQUHAgEW
# M2h0dHA6Ly93d3cubWljcm9zb2Z0LmNvbS9wa2lvcHMvRG9jcy9SZXBvc2l0b3J5
# Lmh0bTATBgNVHSUEDDAKBggrBgEFBQcDCDAZBgkrBgEEAYI3FAIEDB4KAFMAdQBi
# AEMAQTALBgNVHQ8EBAMCAYYwDwYDVR0TAQH/BAUwAwEB/zAfBgNVHSMEGDAWgBTV
# 9lbLj+iiXGJo0T2UkFvXzpoYxDBWBgNVHR8ETzBNMEugSaBHhkVodHRwOi8vY3Js
# Lm1pY3Jvc29mdC5jb20vcGtpL2NybC9wcm9kdWN0cy9NaWNSb29DZXJBdXRfMjAx
# MC0wNi0yMy5jcmwwWgYIKwYBBQUHAQEETjBMMEoGCCsGAQUFBzAChj5odHRwOi8v
# d3d3Lm1pY3Jvc29mdC5jb20vcGtpL2NlcnRzL01pY1Jvb0NlckF1dF8yMDEwLTA2
# LTIzLmNydDANBgkqhkiG9w0BAQsFAAOCAgEAnVV9/Cqt4SwfZwExJFvhnnJL/Klv
# 6lwUtj5OR2R4sQaTlz0xM7U518JxNj/aZGx80HU5bbsPMeTCj/ts0aGUGCLu6WZn
# OlNN3Zi6th542DYunKmCVgADsAW+iehp4LoJ7nvfam++Kctu2D9IdQHZGN5tggz1
# bSNU5HhTdSRXud2f8449xvNo32X2pFaq95W2KFUn0CS9QKC/GbYSEhFdPSfgQJY4
# rPf5KYnDvBewVIVCs/wMnosZiefwC2qBwoEZQhlSdYo2wh3DYXMuLGt7bj8sCXgU
# 6ZGyqVvfSaN0DLzskYDSPeZKPmY7T7uG+jIa2Zb0j/aRAfbOxnT99kxybxCrdTDF
# NLB62FD+CljdQDzHVG2dY3RILLFORy3BFARxv2T5JL5zbcqOCb2zAVdJVGTZc9d/
# HltEAY5aGZFrDZ+kKNxnGSgkujhLmm77IVRrakURR6nxt67I6IleT53S0Ex2tVdU
# CbFpAUR+fKFhbHP+CrvsQWY9af3LwUFJfn6Tvsv4O+S3Fb+0zj6lMVGEvL8CwYKi
# excdFYmNcP7ntdAoGokLjzbaukz5m/8K6TT4JDVnK+ANuOaMmdbhIurwJ0I9JZTm
# dHRbatGePu1+oDEzfbzL6Xu/OHBE0ZDxyKs6ijoIYn/ZcGNTTY3ugm2lBRDBcQZq
# ELQdVTNYs6FwZvKhggNQMIICOAIBATCB+aGB0aSBzjCByzELMAkGA1UEBhMCVVMx
# EzARBgNVBAgTCldhc2hpbmd0b24xEDAOBgNVBAcTB1JlZG1vbmQxHjAcBgNVBAoT
# FU1pY3Jvc29mdCBDb3Jwb3JhdGlvbjElMCMGA1UECxMcTWljcm9zb2Z0IEFtZXJp
# Y2EgT3BlcmF0aW9uczEnMCUGA1UECxMeblNoaWVsZCBUU1MgRVNOOjMzMDMtMDVF
# MC1EOTQ3MSUwIwYDVQQDExxNaWNyb3NvZnQgVGltZS1TdGFtcCBTZXJ2aWNloiMK
# AQEwBwYFKw4DAhoDFQDiWNBeFJ9jvaErN64D1G86eL0mu6CBgzCBgKR+MHwxCzAJ
# BgNVBAYTAlVTMRMwEQYDVQQIEwpXYXNoaW5ndG9uMRAwDgYDVQQHEwdSZWRtb25k
# MR4wHAYDVQQKExVNaWNyb3NvZnQgQ29ycG9yYXRpb24xJjAkBgNVBAMTHU1pY3Jv
# c29mdCBUaW1lLVN0YW1wIFBDQSAyMDEwMA0GCSqGSIb3DQEBCwUAAgUA6s7xUTAi
# GA8yMDI0MTEwMTA2MTg1N1oYDzIwMjQxMTAyMDYxODU3WjB3MD0GCisGAQQBhFkK
# BAExLzAtMAoCBQDqzvFRAgEAMAoCAQACAhUZAgH/MAcCAQACAhP/MAoCBQDq0ELR
# AgEAMDYGCisGAQQBhFkKBAIxKDAmMAwGCisGAQQBhFkKAwKgCjAIAgEAAgMHoSCh
# CjAIAgEAAgMBhqAwDQYJKoZIhvcNAQELBQADggEBAAvXtch36wmF9qtdhXQ6KWif
# r5o+m3kpS1gB/z2eoHdfEa/6vq1lAabj3Kgt1eiCTOxGUxKbnBLMcgfSFMpluCgV
# BdL/tpjmFfmQl4GQm9ucI2fxP2Z2/AmZv9ojlnvD3pyfY0rFMHR3QUhCC2cV+hSj
# 4+Z22wIreOV43F6pDyce57d+HbllFUGs5+CXojU1S/uOdvN9IXcwJM3c5m7IGu6f
# cI9kUCaRWdz7T9e+Rl93mvJ928n8NfGN29WzCJkEgSZ0RMF2BbXCyd7hC9i9Io10
# Jo3LM6p/6DN5750wxEKM4b24+WCx3jD2wBaMO7QjIn2E1oTOqZd4cvqeaefO2wsx
# ggQNMIIECQIBATCBkzB8MQswCQYDVQQGEwJVUzETMBEGA1UECBMKV2FzaGluZ3Rv
# bjEQMA4GA1UEBxMHUmVkbW9uZDEeMBwGA1UEChMVTWljcm9zb2Z0IENvcnBvcmF0
# aW9uMSYwJAYDVQQDEx1NaWNyb3NvZnQgVGltZS1TdGFtcCBQQ0EgMjAxMAITMwAA
# AebZQp7qAPh94QABAAAB5jANBglghkgBZQMEAgEFAKCCAUowGgYJKoZIhvcNAQkD
# MQ0GCyqGSIb3DQEJEAEEMC8GCSqGSIb3DQEJBDEiBCCn2yLH/MasXNDLdLNv2yCq
# 4djcWz3rnLET69koR61YszCB+gYLKoZIhvcNAQkQAi8xgeowgecwgeQwgb0EIM+7
# o4aoHrMJaG8gnLO1q16hIYcRnoy6FnOCbnSD0sZZMIGYMIGApH4wfDELMAkGA1UE
# BhMCVVMxEzARBgNVBAgTCldhc2hpbmd0b24xEDAOBgNVBAcTB1JlZG1vbmQxHjAc
# BgNVBAoTFU1pY3Jvc29mdCBDb3Jwb3JhdGlvbjEmMCQGA1UEAxMdTWljcm9zb2Z0
# IFRpbWUtU3RhbXAgUENBIDIwMTACEzMAAAHm2UKe6gD4feEAAQAAAeYwIgQg71sx
# 4ehvG5S8yx36Mxu0D2uUq7dhoJLGd1P9qCEFihowDQYJKoZIhvcNAQELBQAEggIA
# Y1TYi2so17QSESY8f1lIMNsWgbmKXeq7KEjgDAMjt+WE7gqM4dKy7BBlXQ2OCxyf
# Bnqa+FPbApnBz6n+Xg9Gzs5DjXPYph28WEF5HRnAMmy9xqeto9HYRkrlk34Lq0fX
# lncntpN+mSsuXHdkwLnihDX0aj72+onfAmyTVP/yoRFYeyGJdqYEWvuVcOcUg+V7
# G086tk2GMGdAMV5kFWwWajSkgYn42y/JtOw+LAOJWSuuMN3TkSegHVkV3Uf6ZSHK
# jM5awz4/gCraSVvKCcfodjKpF7SpVVrEq0k4TfHVPyrnf0Lst1zBgLb7K9i92N2S
# vccPlKhB5m+vvtngBw+DZFAQaA60y4gzHil+oX/Xx4Rvy+e6AOWhy/ueaU4HbmIh
# z/qfLOL/IbcIvurmpuMX9p+oHdf5mC8EH9TItrKiEyTvpgUiBwbndJI+BZ9glGuD
# ZsYZdc1YI+x7w1l1ZxeOXbhK6MYWTd4pZ6ugfxb8qWmkJvPxML+ZVz9+9DiU4mzV
# CuPS3/mg9yqz6ZuCAqiDERrW9FAsJtzU559cgrP9M5RbrPh/sugrju1XnhBg7Le7
# uDKoR9Sj9cCCA918oRwxmgSYPNY00ccUS4zaxylanz5r+/tVd2j+W6/JqwNRoowM
# 4EKZwLMnsHoYRJKyTMIbiGnqNzwG6vRmAVGzlvQRWfw=
# SIG # End signature block