public/Get-AxisNetworkInfo.ps1
|
<# .SYNOPSIS Retrieves network information for an Axis device. .DESCRIPTION The Get-AxisNetworkInfo function retrieves network information for an Axis device, such as IP address, subnet mask, gateway, DNS settings, hostname, and various network service statuses. .PARAMETER Device Specifies the IP address or hostname of the Axis device. .EXAMPLE Get-AxisNetworkInfo -Device "192.168.1.100" DHCP : True IPAddress : 192.168.1.100 SubnetMask : 255.255.255.0 Gateway : 192.168.1.1 DNS : 8.8.8.8,8.8.4.4 HostName : axis-b8a44f4bfed4 Name : Hallway-Camera DNSUpdateEnabled : True DNSHostName : axis-b8a44f4bfed4.example.com Bonjour : False SSH : False UPnP : False WSDiscovery : False #> function Get-AxisNetworkInfo { [cmdletbinding()] Param( [Parameter(Mandatory=$true)] [String]$Device ) #Standard Post method did not work even on current cameras. This was somehow better $Groups = @( 'Network' 'WebService.DiscoveryMode.Discoverable' 'RemoteService.Enabled' ) $result = Get-AxisParameter -Device $Device -Group $Groups [pscustomobject]@{ DHCP = $result.'Network.BootProto' -eq 'dhcp' IPAddress = $result.'Network.eth0.IPAddress' SubnetMask = $result.'Network.eth0.SubnetMask' Gateway = $result.'Network.Routing.DefaultRouter' DNS = $result.'Network.Resolver.NameServerList' HostName = $result.'Network.HostName' Name = $result.'Network.UPnP.FriendlyName' DNSUpdateEnabled = $result.'Network.DNSUpdate.Enabled' -eq 'yes' DNSHostName = $result.'Network.DNSUpdate.DNSName' Bonjour = $result.'Network.Bonjour.Enabled' -eq 'yes' SSH = $result.'Network.SSH.Enabled' -eq 'yes' UPnP = $result.'Network.UpnP.Enabled' -eq 'yes' WSDiscovery = $result.'WebService.DiscoveryMode.Discoverable' -eq 'yes' O3C = $result.'RemoteService.Enabled' -eq 'oneclick' } } |