Connect-AppVeyorToAWS.ps1
|
Function Connect-AppVeyorToAWS { <# .SYNOPSIS Command to enable AWS builds. Works with both hosted AppVeyor and AppVeyor Server. .DESCRIPTION You can connect your AppVeyor account (on both hosted AppVeyor and on-premise AppVeyor Server) to your own AWS account for AppVeyor to instantiate build VMs in it. There are several benefits like having the ability to customize your build image, select desired VM size, set custom build timeout and many others. To simplify the setup process for you, command provisions necessary AWS resources, runs Hashicorp Packer to create a basic build image, and puts all the AppVeyor configuration together. After running this command, you should be able to start builds on AWS immediately (and optionally customize your AWS build environment later). .PARAMETER AppVeyorUrl AppVeyor URL. For hosted AppVeyor it is https://ci.appveyor.com. For Appveyor Server users it is URL of on-premise AppVeyor Server installation .PARAMETER ApiToken API key for specific account (not 'All accounts'). Hosted AppVeyor users can find it at https://ci.appveyor.com/api-keys. Appveyor Server users can find it at <appveyor_server_url>/api-keys. .PARAMETER AccessKeyId AWS Access Key ID to be used both by Packer to create an AMI and by AppVeyor to create required AWS resources and provision build VMs. .PARAMETER SecretAccessKey AWS Secret Access Key to be used both by Packer to create an AMI and by AppVeyor to create required AWS resources and provision build VMs. Note: later you can replace those credentials with Role ARN to assume in AppVeyor settings for your AWS build environment. .PARAMETER SkipDisclaimer Skip warning related to AWS resources creation and potential charges. It is recommended to read the warning at least once, but it can come handy if you need to re-run the command. .PARAMETER Region AWS region where you want the command to create a build worker AMI and all additional required resources. Also, AppVeyor will create build VMs in this location. Use short notation (not display name) e.g. 'us-east-1', not 'US East (Virginia)'. .PARAMETER InstanceSize Type of EC2 instance, e.g. 'm4.large' .PARAMETER SubnetId Subnet ID for a subnet where build VMs will be created. .PARAMETER AmiId It may be that you run the command, and it creates a valid AMI, but some AppVeyor settings are not set correctly (or you may just want to change them without doing it in the AppVeyor build environments UI). In this case you want to skip the most time consuming step (creating an AMI) and pass the existing AMI ID to this parameter. .PARAMETER CommonPrefix Command will prepend all created AWS resources names with it. Because of storage account names restrictions, is must contain only letters and numbers and be shorter than 16 symbols. Default value is 'appveyor'. .PARAMETER ImageOs Operating system of build VM image. Valid values: 'Windows', 'Linux'. Default value is 'Windows'. .PARAMETER ImageName Description to be passed to Packer and name to be used for AppVeyor image. Default value generated is based on the value of 'ImageOs' parameter. .PARAMETER ImageTemplate If you are familiar with Hashicorp Packer, you can replace template used by this command with another one. Default value generated is based on the value of 'ImageOs' parameter. .PARAMETER ImageFeatures Comma-separated list of feature IDs to be installed on the image. Available IDs can be found at https://github.com/appveyor/build-images/blob/master/byoc/image-builder-metadata.json under 'installedFeatures'. .PARAMETER ImageCustomScript Base-64 encoded text of custom sript to execute during image creation. It should not contain reboot instructions. .PARAMETER ImageCustomScriptAfterReboot Base-64 encoded text of custom sript to execute during image creation, after reboot. It is usefull for cases when custom software being installed with 'ImageCustomScript' required some additional action after computer restarted. .EXAMPLE Connect-AppVeyorToAWS Let command collect all required information .EXAMPLE Connect-AppVeyorToAWS -AppVeyorUrl "https://ci.appveyor.com" -ApiToken XXXXXXXXXXXXXXXXXXXXX -AccessKeyId XXXXXXXXXXXXXXXXXXXX -SecretAccessKey XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX -SkipDisclaimer -Region us-east-1 -InstanceSize m4.large -aws_subnet subnet-xxxxxxxx Run command with all required parameters so command will ask no questions. It will create resources in AWS US East (Virginia) region and will connect it to hosted AppVeyor. #> [CmdletBinding()] param ( [Parameter(Mandatory=$true,HelpMessage="AppVeyor URL`nFor hosted AppVeyor it is https://ci.appveyor.com`nFor Appveyor Server users it is URL of on-premise AppVeyor Server installation")] [string]$AppVeyorUrl, [Parameter(Mandatory=$true,HelpMessage="API key for specific account (not 'All accounts')`nHosted AppVeyor users can find it at https://ci.appveyor.com/api-keys`nAppveyor Server users can find it at <appveyor_server_url>/api-keys")] [string]$ApiToken, [Parameter(Mandatory=$false)] [string]$AccessKeyId, [Parameter(Mandatory=$false)] [string]$SecretAccessKey, [Parameter(Mandatory=$false)] [switch]$SkipDisclaimer, [Parameter(Mandatory=$false)] [string]$Region, [Parameter(Mandatory=$false)] [string]$InstanceSize, [Parameter(Mandatory=$false)] [string]$SubnetId, [Parameter(Mandatory=$false)] [string]$AmiId, [Parameter(Mandatory=$false)] [string]$CommonPrefix = "appveyor", [Parameter(Mandatory=$false)] [ValidateSet('Windows','Linux')] [string]$ImageOs = "Windows", [Parameter(Mandatory=$false)] [string]$ImageName, [Parameter(Mandatory=$false)] [string]$ImageTemplate, [Parameter(Mandatory=$false)] [string]$ImageFeatures, [Parameter(Mandatory=$false)] [string]$ImageCustomScript, [Parameter(Mandatory=$false)] [string]$ImageCustomScriptAfterReboot ) function ExitScript { if ($aws_profile -and (Get-AWSCredentials -ProfileName $aws_profile)) {Remove-AWSCredentialProfile -ProfileName $aws_profile -ErrorAction Ignore -force} break all } $ErrorActionPreference = "Stop" $StopWatch = New-Object System.Diagnostics.Stopwatch $StopWatch.Start() #Sanitize input $AppVeyorUrl = $AppVeyorUrl.TrimEnd("/") #Validate AppVeyor API access $headers = ValidateAppVeyorApiAccess $AppVeyorUrl $ApiToken #Ensure required tools installed ValidateDependencies -cloudType AWS $regex =[regex] "^([A-Za-z0-9]+)$" if (-not $regex.Match($CommonPrefix).Success) { Write-Warning "'CommonPrefix' can contain only letters and numbers" ExitScript } #"artifact" is longest name postfix. #63 is S3 bucket name limit #5 is minumum lenght of infix to be unique $maxtotallength = 63 $mininfix = 5 $maxpostfix = "artifact".Length $maxprefix = $maxtotallength - $maxpostfix - $mininfix if ($CommonPrefix.Length -ge $maxprefix){ Write-warning "Length of 'CommonPrefix' must be under $($maxprefix)" ExitScript } #Make S3 names globally unique $md5 = new-object -TypeName System.Security.Cryptography.MD5CryptoServiceProvider $utf8 = new-object -TypeName System.Text.UTF8Encoding $apikeyhash = [System.BitConverter]::ToString($md5.ComputeHash($utf8.GetBytes($ApiToken))) $infix = $apikeyhash.Replace("-", "").ToLower() $maxinfix = ($maxtotallength - $CommonPrefix.Length - $maxpostfix) if ($infix.Length -gt $maxinfix){$infix = $infix.Substring(0, $maxinfix)} $aws_s3_bucket_cache = "$($CommonPrefix)$($infix)cache".ToLower() $aws_s3_bucket_artifacts = "$($CommonPrefix)$($infix)artifact".ToLower() $aws_cache_storage_name = "$($CommonPrefix)-aws-cache" $aws_artifact_storage_name = "$($CommonPrefix)-aws-artifacts" $aws_sg_name = "$($CommonPrefix)-sg" $aws_kp_name = "$($CommonPrefix)-kp" $aws_kp_path = if (-not $IsWindows) {Join-Path -Path $home -ChildPath "$aws_kp_name.pem"} else {Join-Path -Path $env:userprofile -ChildPath "$aws_kp_name.pem"} $aws_profile = "$($CommonPrefix)-temp" $ImageName = if ($ImageName) {$ImageName} else {$ImageOs} $ImageTemplate = GetImageTemplatePath $imageTemplate $ImageTemplate = ParseImageFeaturesAndCustomScripts $ImageFeatures $ImageTemplate $ImageCustomScript $ImageCustomScriptAfterReboot $ImageOs $install_user = "appveyor" $install_password = CreatePassword if (-not $SkipDisclaimer) { Write-Warning "`nThis command will create EC2 resources such as security group and key pair. Also, it will run Hashicorp Packer which will create its own temporary EC2 resources and leave AMI for future use by AppVeyor build VMs. Please note that charges for cloud VMs and other cloud resources will be applied directly to your AWS account bill. `n`nIf AWS account you are authorized to contains production resources, you might consider creating a separate account and run this command against it. Additionally, a separate account is better to distinguish AWS bills for CI machines from other AWS bills. `n`nPress Enter to continue or Ctrl-C to exit the command. Use '-SkipDisclaimer' switch parameter to skip this message next time." $disclaimer = Read-Host } try { #Set AWS Credentials if (-not $AccessKeyId) { Write-Warning "Add '-AccessKeyId' parameter to skip this dialog next time." $AccessKeyId = Read-Host "Enter AWS access key ID" } if (-not $SecretAccessKey) { Write-Warning "Add '-SecretAccessKey' parameter to skip this dialog next time." $SecretAccessKey = Read-Host "Enter AWS secret access key" } if (Get-AWSCredentials -ProfileName $aws_profile) {Remove-AWSCredentialProfile -ProfileName $aws_profile -ErrorAction Ignore -force} Set-AWSCredentials -AccessKey $AccessKeyId -SecretKey $SecretAccessKey -StoreAs $aws_profile Set-AWSCredentials -ProfileName $aws_profile #Select AWS region Write-host "`nSelecting AWS region..." -ForegroundColor Cyan $regions = Get-AWSRegion if ($Region) { $aws_region_full = ($regions | ? {$_.Region -eq $Region}).Name } else { for ($i = 1; $i -le $regions.Count; $i++) {"Select $i for $($regions[$i - 1].Name)"} Write-Warning "Add '-Region' parameter to skip this dialog next time." $region_number = Read-Host "Enter your selection" if (-not $region_number) { Write-Warning "No AWS region selected." ExitScript } $selected_region = $regions[$region_number - 1] $Region = $selected_region.Region $aws_region_full = $selected_region.Name } Write-host "Using AWS region '$($aws_region_full)'" -ForegroundColor DarkGray #Select VM size $instancetypes = @( "t2.nano", "t2.micro", "t2.small", "t2.medium", "t2.large", "t2.xlarge", "t2.2xlarge", "t3.nano", "t3.micro", "t3.small", "t3.medium", "t3.large", "t3.xlarge", "t3.2xlarge", "t3a.nano", "t3a.micro", "t3a.small", "t3a.medium", "t3a.large", "t3a.xlarge", "t3a.2xlarge", "m4.large", "m4.xlarge", "m4.2xlarge", "m4.4xlarge", "m4.10xlarge", "m4.16xlarge", "m5.large", "m5.xlarge", "m5.2xlarge", "m5.4xlarge", "m5.12xlarge", "m5.24xlarge", "m5d.large", "m5d.xlarge", "m5d.2xlarge", "m5d.4xlarge", "m5d.12xlarge", "m5d.24xlarge", "m5d.metal", "m5a.large", "m5a.xlarge", "m5a.2xlarge", "m5a.4xlarge", "m5a.12xlarge", "m5a.24xlarge", "m5ad.large", "m5ad.xlarge", "m5ad.2xlarge", "m5ad.4xlarge", "m5ad.12xlarge", "m5ad.24xlarge", "c4.large", "c4.xlarge", "c4.2xlarge", "c4.4xlarge", "c4.8xlarge", "c5.large", "c5.xlarge", "c5.2xlarge", "c5.4xlarge", "c5.9xlarge", "c5.18xlarge", "c5d.xlarge", "c5d.2xlarge", "c5d.4xlarge", "c5d.9xlarge", "c5d.18xlarge", "c5n.large", "c5n.xlarge", "c5n.2xlarge", "c5n.4xlarge", "c5n.9xlarge", "c5n.18xlarge", "r4.large", "r4.xlarge", "r4.2xlarge", "r4.4xlarge", "r4.8xlarge", "r4.16xlarge", "r5.large", "r5.xlarge", "r5.2xlarge", "r5.4xlarge", "r5.12xlarge", "r5.24xlarge", "r5d.large", "r5d.xlarge", "r5d.2xlarge", "r5d.4xlarge", "r5d.12xlarge", "r5d.24xlarge", "r5d.metal", "r5a.large", "r5a.xlarge", "r5a.2xlarge", "r5a.4xlarge", "r5a.12xlarge", "r5a.24xlarge", "r5ad.large", "r5ad.xlarge", "r5ad.2xlarge", "r5ad.4xlarge", "r5ad.12xlarge", "r5ad.24xlarge", "x1.16xlarge", "x1.32xlarge", "x1e.xlarge", "x1e.2xlarge", "x1e.4xlarge", "x1e.8xlarge", "x1e.16xlarge", "x1e.32xlarge", "z1d.large", "z1d.xlarge", "z1d.2xlarge", "z1d.3xlarge", "z1d.6xlarge", "z1d.12xlarge", "u-6tb1.metal", "u-9tb1.metal", "u-12tb1.metal", "i3.large", "i3.xlarge", "i3.2xlarge", "i3.4xlarge", "i3.8xlarge", "i3.16xlarge", "i3.metal", "i3en.large", "i3en.xlarge", "i3en.2xlarge", "i3en.3xlarge", "i3en.6xlarge", "i3en.12xlarge", "i3en.24xlarge", "d2.xlarge", "d2.2xlarge", "d2.4xlarge", "d2.8xlarge", "h1.2xlarge", "h1.4xlarge", "h1.8xlarge", "h1.16xlarge", "f1.2xlarge", "f1.4xlarge", "f1.16xlarge", "g3s.xlarge", "g3.4xlarge", "g3.8xlarge", "g3.16xlarge", "p2.xlarge", "p2.8xlarge", "p2.16xlarge", "p3.2xlarge", "p3.8xlarge", "p3.16xlarge", "p3dn.24xlarge" ) Write-host "`nSelecting EC2 instance type..." -ForegroundColor Cyan if (-not $InstanceSize) { #Unable to get a list (https://github.com/aws/aws-cli/issues/1279) so people need to enter. for ($i = 1; $i -le $instancetypes.Count; $i++) {"Select $i for $($instancetypes[$i - 1])"} if ($ImageOs -eq "Windows") {Write-Warning "Minimum recommended is 'm4.large'"} if ($ImageOs -eq "Linux") {Write-Warning "Minimum recommended is 't3.medium'"} Write-Warning "Add '-InstanceSize' parameter to skip this dialog next time." $instance_number = Read-Host "Enter your selection" if (-not $instance_number) { Write-Warning "No EC2 instance type selected." ExitScript } $selected_instance_type = $instancetypes[$instance_number - 1] $InstanceSize = $selected_instance_type } Write-host "Using instance type '$($InstanceSize)'" -ForegroundColor DarkGray Write-host "`nGetting default subnet in the first availability zone..." -ForegroundColor Cyan if (-not $SubnetId) { $availabilityzones = Get-EC2AvailabilityZone -Region $Region | ? {$_.State -eq "available"} | Sort-Object -Property ZoneName -ErrorAction Ignore if (-not $availabilityzones -or $availabilityzones.Count -lt 1) { Write-Warning "Unable to find EC2 availability zone with 'available' state." ExitScript } $availabilityzone = $availabilityzones[0] $subnet = Get-EC2Subnet -Region $Region | ? {$_.AvailabilityZone -eq $AvailabilityZone.ZoneName -and $_.State -eq "available" -and $_.DefaultForAz -eq $true} if (-not $subnet) { Write-Warning "Unable to find default available subnet in the availability zone $($AvailabilityZone.ZoneName). Please use 'SubnetId' parameter to specify a subnet" ExitScript } $SubnetId = $subnet.SubnetId } Write-host "Using subnet '$($SubnetId)'" -ForegroundColor DarkGray #Get or create security group Write-host "`nGetting or creating AWS security group..." -ForegroundColor Cyan $sg = Get-EC2SecurityGroup -Region $Region -ErrorAction Ignore | ? {$_.GroupName -eq $aws_sg_name} if (-not $sg) { $sg = New-EC2SecurityGroup -GroupName $aws_sg_name -GroupDescription $aws_sg_name -Region $Region } $sg = Get-EC2SecurityGroup -GroupName $aws_sg_name -Region $Region $aws_sg_id = $sg.GroupId Write-host "Using security group '$($aws_sg_name)'" -ForegroundColor DarkGray $remoteaccessport = if ($ImageOs -eq "Windows") {3389} elseif ($ImageOs -eq "Linux") {22} $remoteaccessname = if ($ImageOs -eq "Windows") {"RDP"} elseif ($ImageOs -eq "Linux") {"SSH"} Write-host "`nAllowing $($remoteaccessname) access to build VMs..." -ForegroundColor Cyan if (-not ($sg.IpPermission | ? {$_.ToPort -eq $remoteaccessport})) { $ipPermission = New-Object Amazon.EC2.Model.IpPermission $ipPermission.IpProtocol = "tcp" $ipPermission.ToPort = $remoteaccessport $ipPermission.FromPort = $remoteaccessport $ipPermission.IpRange = "0.0.0.0/0" Grant-EC2SecurityGroupIngress -GroupName $aws_sg_name -Region $Region -ipPermission $ipPermission Write-host "Created inbound rule to allow TCP $($remoteaccessport) ($($remoteaccessname))" -ForegroundColor DarkGray } else {Write-host "TCP $($remoteaccessport) ($($remoteaccessname)) inbound rule already exist for security group '$($aws_sg_name)'" -ForegroundColor DarkGray} #Get or create key pair Write-host "`nGetting or creating AWS key pair..." -ForegroundColor Cyan $kp = Get-EC2KeyPair -Region $Region -ErrorAction Ignore | ? {$_.KeyName -eq $aws_kp_name} if (-not $kp) { $kp = New-EC2KeyPair -KeyName $aws_kp_name -Region $Region $kp.KeyMaterial | Out-File -Encoding ascii $aws_kp_path Write-Warning "AWS key pair $($aws_kp_name) has been created. Please store private key $($aws_kp_path) in a secure location" } Write-host "Using key pair '$($aws_kp_name)'" -ForegroundColor DarkGray #Create S3 bucket for cache storage Write-host "`nGetting or creating S3 bucket for cache storage..." -ForegroundColor Cyan $bucket = Get-S3Bucket -BucketName $aws_s3_bucket_cache if (-not $bucket) { $bucket = New-S3Bucket -BucketName $aws_s3_bucket_cache -Region $Region } else { $bucketregion = (Get-S3BucketLocation -BucketName $aws_s3_bucket_cache).Value if ($bucketregion -and ($bucketregion -ne $Region)) { Write-Warning @" S3 bucket $($aws_s3_bucket_cache) id in '$($bucketregion)' region, while build environment is being set up in '$($Region)' region. This may lead to slower builds and unnecessary charges `nYou have one of the following options: `n- Restart use $($bucketregion) region instead of $($Region)to setup build environment. `n- Use another prefix to name AWS objects (use 'CommonPrefix' paremeter). `n- Delete $($aws_s3_bucket_cache) bucket. "@ ExitScript } } Write-host "Using S3 bucket '$($aws_s3_bucket_cache)' for cache storage" -ForegroundColor DarkGray #Create S3 bucket for artifacts Write-host "`nGetting or creating S3 bucket for artifacts storage..." -ForegroundColor Cyan $bucket = Get-S3Bucket -BucketName $aws_s3_bucket_artifacts if (-not $bucket) { $bucket = New-S3Bucket -BucketName $aws_s3_bucket_artifacts -Region $Region } else { $bucketregion = (Get-S3BucketLocation -BucketName $aws_s3_bucket_artifacts).Value if ($bucketregion -and ($bucketregion -ne $Region)) { Write-Warning @" S3 bucket $($aws_s3_bucket_artifacts) id in '$($bucketregion)' region, while build environment is being set up in '$($Region)' region. This may lead to slower builds and unnecessary charges `nYou have one of the following options: `n- Restart use $($bucketregion) region instead of $($Region)to setup build environment. `n- Use another prefix to name AWS objects (use 'CommonPrefix' paremeter). `n- Delete $($aws_s3_bucket_artifacts) bucket. "@ ExitScript } } Write-host "Using S3 bucket '$($aws_s3_bucket_artifacts)' for artifacts storage" -ForegroundColor DarkGray #Run Packer to create an AMI if (-not $AmiId) { $packerPath = GetPackerPath $packerManifest = "$(CreateTempFolder)/packer-manifest.json" Write-host "`nRunning Packer to create a basic build VM AMI..." -ForegroundColor Cyan Write-Warning "Add '-AmiId' parameter with if you want to to skip Packer build and and reuse existing AMI. It must be in '$($aws_region_full)' region)." Write-Host "`n`nPacker progress:`n" $date_mark=Get-Date -UFormat "%Y%m%d%H%M%S" $env:PACKER_LOG=1 $env:PACKER_LOG_PATH= Join-Path $(GetHomeDir) "packer-$date_mark.log" & $packerPath build '--only=amazon-ebs' ` -var "aws_access_key=$AccessKeyId" ` -var "aws_secret_key=$SecretAccessKey" ` -var "aws_region=$Region" ` -var "install_password=$install_password" ` -var "install_user=$install_user" ` -var "aws_instance_type=$InstanceSize" ` -var "build_agent_mode=AmazonEC2" ` -var "image_description=$ImageName" ` -var "datemark=$date_mark" ` -var "packer_manifest=$packerManifest" ` -var "opt_features=$ImageFeatures" ` $ImageTemplate #Get VHD path if (-not (test-path $packerManifest)) { Write-Warning "Packer build failed." ExitScript } Write-host "`nGetting AMI ID..." -ForegroundColor Cyan $manifest = Get-Content -Path $packerManifest | ConvertFrom-Json $AmiId = $manifest.builds[0].artifact_id.TrimStart("$($Region)").TrimStart(":") Remove-Item $packerManifest -Force -ErrorAction Ignore Write-host "Build image AMI created by Packer. AMI ID: '$($AmiId)'" -ForegroundColor DarkGray Write-Host "Default build VM credentials: User: 'appveyor', Password: '$($install_password)'. Normally you do not need this password as it will be reset to a random string when the build starts. However you can use it if you need to create and update a VM from the Packer-created VHD manually" -ForegroundColor DarkGray } else { Write-host "`nSkipping AMI creation with Packer..." -ForegroundColor Cyan Write-host "Using exiting AMI with ID '$($AmiId)'" -ForegroundColor DarkGray } #Create or update build cache storage settings Write-host "`nCreating or updating build cache storage settings on AppVeyor..." -ForegroundColor Cyan $buildcaches = Invoke-RestMethod -Uri "$($AppVeyorUrl)/api/build-caches" -Headers $headers -Method Get $buildcache = $buildcaches | ? ({$_.name -eq $aws_cache_storage_name})[0] if (-not $buildcache) { $body = @{ name = $aws_cache_storage_name cacheType = "AmazonS3" settings = @{ accessKeyId = $AccessKeyId secretAccessKey = $SecretAccessKey region = $Region bucketName = $aws_s3_bucket_cache } } $jsonBody = $body | ConvertTo-Json -Depth 10 Invoke-RestMethod -Uri "$($AppVeyorUrl)/api/build-caches" -Headers $headers -Body $jsonBody -Method Post | Out-Null Write-host "AppVeyor build cache storage '$($aws_cache_storage_name)' has been created." -ForegroundColor DarkGray } else { $settings = Invoke-RestMethod -Uri "$($AppVeyorUrl)/api/build-caches/$($buildcache.buildCacheId)" -Headers $headers -Method Get $settings.name = $aws_cache_storage_name $settings.cacheType = "AmazonS3" $settings.settings.accessKeyId = $AccessKeyId $settings.settings.secretAccessKey = $SecretAccessKey $settings.settings.region = $Region $settings.settings.bucketName = $aws_s3_bucket_cache $jsonBody = $settings | ConvertTo-Json -Depth 10 Invoke-RestMethod -Uri "$($AppVeyorUrl)/api/build-caches"-Headers $headers -Body $jsonBody -Method Put | Out-Null Write-host "AppVeyor build cache storage '$($aws_cache_storage_name)' has been updated." -ForegroundColor DarkGray } #Create or update artifacts storage settings Write-host "`nCreating or updating artifacts storage settings on AppVeyor..." -ForegroundColor Cyan $artifactstorages = Invoke-RestMethod -Uri "$($AppVeyorUrl)/api/artifact-storages" -Headers $headers -Method Get $artifactstorage = $artifactstorages | ? ({$_.name -eq $aws_artifact_storage_name})[0] if (-not $artifactstorage) { $body = @{ name = $aws_artifact_storage_name storageType = "AmazonS3" settings = @{ accessKeyId = $AccessKeyId secretAccessKey = $SecretAccessKey region = $Region bucketName = $aws_s3_bucket_artifacts } } $jsonBody = $body | ConvertTo-Json -Depth 10 Invoke-RestMethod -Uri "$($AppVeyorUrl)/api/artifact-storages" -Headers $headers -Body $jsonBody -Method Post | Out-Null Write-host "AppVeyor artifacts storage '$($aws_artifact_storage_name)' has been created." -ForegroundColor DarkGray } else { $settings = Invoke-RestMethod -Uri "$($AppVeyorUrl)/api/artifact-storages/$($artifactstorage.artifactStorageId)" -Headers $headers -Method Get $settings.name = $aws_artifact_storage_name $settings.storageType = "AmazonS3" $settings.settings.accessKeyId = $AccessKeyId $settings.settings.secretAccessKey = $SecretAccessKey $settings.settings.region = $Region $settings.settings.bucketName = $aws_s3_bucket_artifacts $jsonBody = $settings | ConvertTo-Json -Depth 10 Invoke-RestMethod -Uri "$($AppVeyorUrl)/api/artifact-storages"-Headers $headers -Body $jsonBody -Method Put | Out-Null Write-host "AppVeyor artifacts storage '$($aws_artifact_storage_name)' has been updated." -ForegroundColor DarkGray } #Create or update cloud Write-host "`nCreating or updating build environment on AppVeyor..." -ForegroundColor Cyan $build_cloud_name = "AWS $Region $InstanceSize" $clouds = Invoke-RestMethod -Uri "$($AppVeyorUrl)/api/build-clouds" -Headers $headers -Method Get $cloud = $clouds | ? ({$_.name -eq $build_cloud_name})[0] if (-not $cloud) { $body = @{ name = $build_cloud_name cloudType = "AmazonEC2" workersCapacity = 20 settings = @{ artifactStorageName = $aws_artifact_storage_name buildCacheName = $aws_cache_storage_name failureStrategy = @{ jobStartTimeoutSeconds = 300 provisioningAttempts = 3 } cloudSettings = @{ awsAccount =@{ accessKeyId = $AccessKeyId secretAccessKey = $SecretAccessKey } vmConfiguration = @{ region = $Region securityGroupId = $aws_sg_id instanceSize = $InstanceSize keyPairName = $aws_kp_name } networking = @{ assignPublicIPAddress = $true subnetId = $SubnetId } images = @(@{ name = $ImageName imageId = $AmiId }) } } } $jsonBody = $body | ConvertTo-Json -Depth 10 Invoke-RestMethod -Uri "$($AppVeyorUrl)/api/build-clouds" -Headers $headers -Body $jsonBody -Method Post | Out-Null $clouds = Invoke-RestMethod -Uri "$($AppVeyorUrl)/api/build-clouds" -Headers $headers -Method Get $cloud = $clouds | ? ({$_.name -eq $build_cloud_name})[0] Write-host "AppVeyor build environment '$($build_cloud_name)' has been created." -ForegroundColor DarkGray } else { $settings = Invoke-RestMethod -Uri "$($AppVeyorUrl)/api/build-clouds/$($cloud.buildCloudId)" -Headers $headers -Method Get $settings.name = $build_cloud_name $settings.cloudType = "AmazonEC2" $settings.workersCapacity = 20 if (-not $settings.settings.artifactStorageName ) { $settings.settings | Add-Member NoteProperty "artifactStorageName" $aws_artifact_storage_name -force } else { $settings.settings.artifactStorageName = $aws_artifact_storage_name } if (-not $settings.settings.buildCacheName ) { $settings.settings | Add-Member NoteProperty "buildCacheName" $aws_cache_storage_name -force } else { $settings.settings.buildCacheName = $aws_cache_storage_name } $settings.settings.failureStrategy.jobStartTimeoutSeconds = 300 $settings.settings.failureStrategy.provisioningAttempts = 3 $settings.settings.cloudSettings.awsAccount.accessKeyId = $AccessKeyId $settings.settings.cloudSettings.awsAccount.secretAccessKey = $SecretAccessKey $settings.settings.cloudSettings.vmConfiguration.region = $Region $settings.settings.cloudSettings.vmConfiguration.securityGroupId = $aws_sg_id $settings.settings.cloudSettings.vmConfiguration.instanceSize = $InstanceSize $settings.settings.cloudSettings.vmConfiguration.keyPairName = $aws_kp_name $settings.settings.cloudSettings.networking.assignPublicIPAddress = $true $settings.settings.cloudSettings.networking.subnetId = $SubnetId if ($settings.settings.cloudSettings.images | ? {$_.name -eq $ImageName}) { ($settings.settings.cloudSettings.images | ? {$_.name -eq $ImageName}).imageId = $AmiId } else { $new_image = @{ 'name' = $ImageName 'imageId' = $AmiId } $new_image = $new_image | ConvertTo-Json | ConvertFrom-Json $settings.settings.cloudSettings.images += $new_image } $jsonBody = $settings | ConvertTo-Json -Depth 10 Invoke-RestMethod -Uri "$($AppVeyorUrl)/api/build-clouds"-Headers $headers -Body $jsonBody -Method Put | Out-Null Write-host "AppVeyor build environment '$($build_cloud_name)' has been updated." -ForegroundColor DarkGray } SetBuildWorkerImage $headers $ImageName $ImageOs $StopWatch.Stop() $completed = "{0:hh}:{0:mm}:{0:ss}" -f $StopWatch.elapsed Write-Host "`nCompleted in $completed." #Report results and next steps PrintSummary 'AWS EC2 VMs' $AppVeyorUrl $cloud.buildCloudId $build_cloud_name $imageName if (Test-Path $aws_kp_path) { Write-Host " - Please do not forget to move $($aws_kp_path) to a secure location." -ForegroundColor DarkGray } } catch { Write-Warning "Command exited with error: $($_.Exception)" ExitScript } } |