DSCResources/MSFT_WaitForADDomain/MSFT_WaitForADDomain.psm1
|
$script:resourceModulePath = Split-Path -Path (Split-Path -Path $PSScriptRoot -Parent) -Parent $script:modulesFolderPath = Join-Path -Path $script:resourceModulePath -ChildPath 'Modules' $script:localizationModulePath = Join-Path -Path $script:modulesFolderPath -ChildPath 'ActiveDirectoryDsc.Common' Import-Module -Name (Join-Path -Path $script:localizationModulePath -ChildPath 'ActiveDirectoryDsc.Common.psm1') $script:localizedData = Get-LocalizedData -ResourceName 'MSFT_WaitForADDomain' # This file is used to remember the number of times the node has been rebooted. $script:restartLogFile = Join-Path $env:temp -ChildPath 'WaitForADDomain_Reboot.tmp' # This scriptblock is ran inside the background job. $script:waitForDomainControllerScriptBlock = { param ( # Only used for unit tests, and debug purpose. [Parameter()] [System.Boolean] $RunOnce, [Parameter(Mandatory = $true)] [System.String] $DomainName, [Parameter()] [System.String] $SiteName, [Parameter()] [System.Management.Automation.PSCredential] $Credential, [Parameter()] [System.Boolean] $WaitForValidCredentials ) $domainFound = $false do { Import-Module ActiveDirectoryDsc $findDomainControllerParameters = @{ DomainName = $DomainName } if ($SiteName) { $findDomainControllerParameters['SiteName'] = $SiteName } if ($null -ne $Credential) { $findDomainControllerParameters['Credential'] = $Credential } if ($PSBoundParameters.ContainsKey('WaitForValidCredentials')) { $findDomainControllerParameters['WaitForValidCredentials'] = $WaitForValidCredentials } $currentDomainController = $null # Using verbose so that Receive-Job can output whats happened. $currentDomainController = Find-DomainController @findDomainControllerParameters -Verbose if ($currentDomainController) { $domainFound = $true } else { $domainFound = $false # Using verbose so that Receive-Job can output whats happened. Clear-DnsClientCache -Verbose Start-Sleep -Seconds 10 } } until ($domainFound -or $RunOnce) } <# .SYNOPSIS Returns the current state of the specified Active Directory domain. .PARAMETER DomainName Specifies the fully qualified domain name to wait for. .PARAMETER SiteName Specifies the site in the domain where to look for a domain controller. .PARAMETER Credential Specifies the credentials that are used when accessing the domain, unless the built-in PsDscRunAsCredential is used. .PARAMETER WaitTimeout Specifies the timeout in seconds that the resource will wait for the domain to be accessible. Default value is 300 seconds. .PARAMETER RestartCount Specifies the number of times the node will be reboot in an effort to connect to the domain. .PARAMETER WaitForValidCredentials Specifies that the resource will not throw an error if authentication fails using the provided credentials and continue wait for the timeout. This can be used if the credentials are known to eventually exist but there are a potential timing issue before they are accessible. #> function Get-TargetResource { [OutputType([System.Collections.Hashtable])] param ( [Parameter(Mandatory = $true)] [System.String] $DomainName, [Parameter()] [System.String] $SiteName, [Parameter()] [System.Management.Automation.PSCredential] $Credential, [Parameter()] [System.UInt64] $WaitTimeout = 300, [Parameter()] [System.UInt32] $RestartCount, [Parameter()] [System.Boolean] $WaitForValidCredentials ) $findDomainControllerParameters = @{ DomainName = $DomainName } Write-Verbose -Message ( $script:localizedData.SearchDomainController -f $DomainName ) if ($PSBoundParameters.ContainsKey('SiteName')) { $findDomainControllerParameters['SiteName'] = $SiteName Write-Verbose -Message ( $script:localizedData.SearchInSiteOnly -f $SiteName ) } if ($PSBoundParameters.ContainsKey('Credential')) { $cimCredentialInstance = New-CimCredentialInstance -Credential $Credential $findDomainControllerParameters['Credential'] = $Credential Write-Verbose -Message ( $script:localizedData.ImpersonatingCredentials -f $Credential.UserName ) } else { if ($null -ne $global:PsDscContext.RunAsUser) { # Running using PsDscRunAsCredential Write-Verbose -Message ( $script:localizedData.ImpersonatingCredentials -f $global:PsDscContext.RunAsUser ) } else { # Running as SYSTEM or current user. Write-Verbose -Message ( $script:localizedData.ImpersonatingCredentials -f (Get-CurrentUser).Name ) } $cimCredentialInstance = $null } $currentDomainController = $null if ($PSBoundParameters.ContainsKey('WaitForValidCredentials')) { $findDomainControllerParameters['WaitForValidCredentials'] = $WaitForValidCredentials } $currentDomainController = Find-DomainController @findDomainControllerParameters if ($currentDomainController) { $domainFound = $true $domainControllerSiteName = $currentDomainController.SiteName Write-Verbose -Message $script:localizedData.FoundDomainController } else { $domainFound = $false $domainControllerSiteName = $null Write-Verbose -Message $script:localizedData.NoDomainController } return @{ DomainName = $DomainName SiteName = $domainControllerSiteName Credential = $cimCredentialInstance WaitTimeout = $WaitTimeout RestartCount = $RestartCount IsAvailable = $domainFound WaitForValidCredentials = $WaitForValidCredentials } } <# .SYNOPSIS Waits for the specified Active Directory domain to have a domain controller that can serve connections. .PARAMETER DomainName Specifies the fully qualified domain name to wait for. .PARAMETER SiteName Specifies the site in the domain where to look for a domain controller. .PARAMETER Credential Specifies the credentials that are used when accessing the domain, unless the built-in PsDscRunAsCredential is used. .PARAMETER WaitTimeout Specifies the timeout in seconds that the resource will wait for the domain to be accessible. Default value is 300 seconds. .PARAMETER RestartCount Specifies the number of times the node will be reboot in an effort to connect to the domain. .PARAMETER WaitForValidCredentials Specifies that the resource will not throw an error if authentication fails using the provided credentials and continue wait for the timeout. This can be used if the credentials are known to eventually exist but there are a potential timing issue before they are accessible. #> function Set-TargetResource { <# Suppressing this rule because $global:DSCMachineStatus is used to trigger a reboot if the domain name cannot be found withing the timeout period. #> [System.Diagnostics.CodeAnalysis.SuppressMessageAttribute('PSAvoidGlobalVars', '')] [CmdletBinding()] param ( [Parameter(Mandatory = $true)] [System.String] $DomainName, [Parameter()] [System.String] $SiteName, [Parameter()] [System.Management.Automation.PSCredential] $Credential, [Parameter()] [System.UInt64] $WaitTimeout = 300, [Parameter()] [System.UInt32] $RestartCount, [Parameter()] [System.Boolean] $WaitForValidCredentials ) Write-Verbose -Message ( $script:localizedData.WaitingForDomain -f $DomainName, $WaitTimeout ) # Only pass properties that could be used when fetching the domain controller. $compareTargetResourceStateParameters = @{ DomainName = $DomainName SiteName = $SiteName Credential = $Credential WaitForValidCredentials = $WaitForValidCredentials } <# Removes any keys not bound to $PSBoundParameters. Need the @() around this to get a new array to enumerate. #> @($compareTargetResourceStateParameters.Keys) | ForEach-Object { if (-not $PSBoundParameters.ContainsKey($_)) { $compareTargetResourceStateParameters.Remove($_) } } <# This returns array of hashtables which contain the properties ParameterName, Expected, Actual, and InDesiredState. In this case only the property 'IsAvailable' will be returned. #> $compareTargetResourceStateResult = Compare-TargetResourceState @compareTargetResourceStateParameters $isInDesiredState = $compareTargetResourceStateResult.Where( { $_.ParameterName -eq 'IsAvailable' }).InDesiredState if (-not $isInDesiredState) { $startJobParameters = @{ ScriptBlock = $script:waitForDomainControllerScriptBlock ArgumentList = @( $false $DomainName $SiteName $Credential $WaitForValidCredentials ) } Write-Verbose -Message $script:localizedData.StartBackgroundJob $jobSearchDomainController = Start-Job @startJobParameters Write-Verbose -Message $script:localizedData.WaitBackgroundJob $waitJobResult = Wait-Job -Job $jobSearchDomainController -Timeout $WaitTimeout # Wait-Job returns an object if the job completed or failed within the timeout. if ($waitJobResult) { Write-Verbose -Message $script:localizedData.BackgroundJobFinished switch ($waitJobResult.State) { 'Failed' { Write-Warning -Message $script:localizedData.BackgroundJobFailed $foundDomainController = $false } 'Completed' { Write-Verbose -Message $script:localizedData.BackgroundJobSuccessful if ($PSBoundParameters.ContainsKey('RestartCount')) { Remove-RestartLogFile } $foundDomainController = $true } } } else { Write-Warning -Message $script:localizedData.TimeoutReached if ($PSBoundParameters.ContainsKey('RestartCount')) { # if the file does not exist this will set $currentRestartCount to 0. [System.UInt32] $currentRestartCount = Get-Content $restartLogFile -ErrorAction SilentlyContinue if ($currentRestartCount -lt $RestartCount) { $currentRestartCount += 1 Set-Content -Path $restartLogFile -Value $currentRestartCount Write-Verbose -Message ( $script:localizedData.RestartWasRequested -f $currentRestartCount, $RestartCount ) [Diagnostics.CodeAnalysis.SuppressMessageAttribute('PSUseDeclaredVarsMoreThanAssignments', '', Justification = 'Set LCM DSCMachineStatus to indicate reboot required')] $global:DSCMachineStatus = 1 } } # The timeout was reached and no restarts was requested. $foundDomainController = $false } # Only output the result from the running job if Verbose was chosen. if ($PSBoundParameters.ContainsKey('Verbose') -or $waitJobResult.State -eq 'Failed') { Write-Verbose -Message $script:localizedData.StartOutputBackgroundJob Receive-Job -Job $jobSearchDomainController Write-Verbose -Message $script:localizedData.EndOutputBackgroundJob } Write-Verbose -Message $script:localizedData.RemoveBackgroundJob # Forcedly remove the job even if it was not completed. Remove-Job -Job $jobSearchDomainController -Force } else { $foundDomainController = $true } if ($foundDomainController) { Write-Verbose -Message ($script:localizedData.DomainInDesiredState -f $DomainName) } else { throw $script:localizedData.NoDomainController } } <# .SYNOPSIS Determines if the specified Active Directory domain have a domain controller that can serve connections. .PARAMETER DomainName Specifies the fully qualified domain name to wait for. .PARAMETER SiteName Specifies the site in the domain where to look for a domain controller. .PARAMETER Credential Specifies the credentials that are used when accessing the domain, unless the built-in PsDscRunAsCredential is used. .PARAMETER WaitTimeout Specifies the timeout in seconds that the resource will wait for the domain to be accessible. Default value is 300 seconds. .PARAMETER RestartCount Specifies the number of times the node will be reboot in an effort to connect to the domain. .PARAMETER WaitForValidCredentials Specifies that the resource will not throw an error if authentication fails using the provided credentials and continue wait for the timeout. This can be used if the credentials are known to eventually exist but there are a potential timing issue before they are accessible. #> function Test-TargetResource { [OutputType([System.Boolean])] param ( [Parameter(Mandatory = $true)] [System.String] $DomainName, [Parameter()] [System.String] $SiteName, [Parameter()] [System.Management.Automation.PSCredential] $Credential, [Parameter()] [System.UInt64] $WaitTimeout = 300, [Parameter()] [System.UInt32] $RestartCount, [Parameter()] [System.Boolean] $WaitForValidCredentials ) Write-Verbose -Message ( $script:localizedData.TestConfiguration -f $DomainName ) # Only pass properties that could be used when fetching the domain controller. $compareTargetResourceStateParameters = @{ DomainName = $DomainName SiteName = $SiteName Credential = $Credential WaitForValidCredentials = $WaitForValidCredentials } <# Removes any keys not bound to $PSBoundParameters. Need the @() around this to get a new array to enumerate. #> @($compareTargetResourceStateParameters.Keys) | ForEach-Object { if (-not $PSBoundParameters.ContainsKey($_)) { $compareTargetResourceStateParameters.Remove($_) } } <# This returns array of hashtables which contain the properties ParameterName, Expected, Actual, and InDesiredState. In this case only the property 'IsAvailable' will be returned. #> $compareTargetResourceStateResult = Compare-TargetResourceState @compareTargetResourceStateParameters if ($false -in $compareTargetResourceStateResult.InDesiredState) { $testTargetResourceReturnValue = $false Write-Verbose -Message ( $script:localizedData.DomainNotInDesiredState -f $DomainName ) } else { $testTargetResourceReturnValue = $true if ($PSBoundParameters.ContainsKey('RestartCount') -and $RestartCount -gt 0 ) { Remove-RestartLogFile } Write-Verbose -Message ( $script:localizedData.DomainInDesiredState -f $DomainName ) } return $testTargetResourceReturnValue } <# .SYNOPSIS Compares the properties in the current state with the properties of the desired state and returns a hashtable with the comparison result. .PARAMETER DomainName Specifies the fully qualified domain name to wait for. .PARAMETER SiteName Specifies the site in the domain where to look for a domain controller. .PARAMETER Credential Specifies the credentials that are used when accessing the domain, unless the built-in PsDscRunAsCredential is used. .PARAMETER WaitForValidCredentials Specifies that the resource will not throw an error if authentication fails using the provided credentials and continue wait for the timeout. This can be used if the credentials are known to eventually exist but there are a potential timing issue before they are accessible. #> function Compare-TargetResourceState { [CmdletBinding()] param ( [Parameter(Mandatory = $true)] [System.String] $DomainName, [Parameter()] [System.String] $SiteName, [Parameter()] [System.Management.Automation.PSCredential] $Credential, [Parameter()] [System.Boolean] $WaitForValidCredentials ) $getTargetResourceParameters = @{ DomainName = $DomainName SiteName = $SiteName Credential = $Credential WaitForValidCredentials = $WaitForValidCredentials } <# Removes any keys not bound to $PSBoundParameters. Need the @() around this to get a new array to enumerate. #> @($getTargetResourceParameters.Keys) | ForEach-Object { if (-not $PSBoundParameters.ContainsKey($_)) { $getTargetResourceParameters.Remove($_) } } $getTargetResourceResult = Get-TargetResource @getTargetResourceParameters <# Only interested in the read-only property IsAvailable, which should always be compared to the value $true. #> $compareResourcePropertyStateParameters = @{ CurrentValues = $getTargetResourceResult DesiredValues = @{ IsAvailable = $true } Properties = 'IsAvailable' } return Compare-ResourcePropertyState @compareResourcePropertyStateParameters } function Remove-RestartLogFile { [CmdletBinding()] param () if (Test-Path -Path $script:restartLogFile) { Remove-Item $script:restartLogFile -Force -ErrorAction SilentlyContinue } } |