AWS.Tools.WorkSpaces.XML
|
<?xml version="1.0"?>
<doc> <assembly> <name>AWS.Tools.WorkSpaces</name> </assembly> <members> <member name="T:Amazon.PowerShell.Cmdlets.WKS.RemoveWKSWorkspaceCmdlet"> <summary> Terminates the specified WorkSpaces. <important><para> Terminating a WorkSpace is a permanent action and cannot be undone. The user's data is destroyed. If you need to archive any user data, contact Amazon Web Services Support before terminating the WorkSpace. </para></important><para> You can terminate a WorkSpace that is in any state except <code>SUSPENDED</code>. </para><para> This operation is asynchronous and returns before the WorkSpaces have been completely terminated. After a WorkSpace is terminated, the <code>TERMINATED</code> state is returned only briefly before the WorkSpace directory metadata is cleaned up, so this state is rarely returned. To confirm that a WorkSpace is terminated, check for the WorkSpace ID by using <a href="https://docs.aws.amazon.com/workspaces/latest/api/API_DescribeWorkspaces.html"> DescribeWorkSpaces</a>. If the WorkSpace ID isn't returned, then the WorkSpace has been successfully terminated. </para><note><para> Simple AD and AD Connector are made available to you free of charge to use with WorkSpaces. If there are no WorkSpaces being used with your Simple AD or AD Connector directory for 30 consecutive days, this directory will be automatically deregistered for use with Amazon WorkSpaces, and you will be charged for this directory as per the <a href="http://aws.amazon.com/directoryservice/pricing/">Directory Service pricing terms</a>. </para><para> To delete empty directories, see <a href="https://docs.aws.amazon.com/workspaces/latest/adminguide/delete-workspaces-directory.html"> Delete the Directory for Your WorkSpaces</a>. If you delete your Simple AD or AD Connector directory, you can always create a new one when you want to start using WorkSpaces again. </para></note> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.RemoveWKSWorkspaceCmdlet.WorkspaceId"> <summary> The IDs of one or more WorkSpaces to terminate. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.RemoveWKSWorkspaceCmdlet.Request"> <summary> <para> <para>The WorkSpaces to terminate. You can specify up to 25 WorkSpaces.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.RemoveWKSWorkspaceCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'FailedRequests'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.WorkSpaces.Model.TerminateWorkspacesResponse). Specifying the name of a property of type Amazon.WorkSpaces.Model.TerminateWorkspacesResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.RemoveWKSWorkspaceCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the Request parameter. The -PassThru parameter is deprecated, use -Select '^Request' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.RemoveWKSWorkspaceCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.WKS.ResetWKSWorkspaceCmdlet"> <summary> Rebuilds the specified WorkSpace. <para> You cannot rebuild a WorkSpace unless its state is <code>AVAILABLE</code>, <code>ERROR</code>, <code>UNHEALTHY</code>, <code>STOPPED</code>, or <code>REBOOTING</code>. </para><para> Rebuilding a WorkSpace is a potentially destructive action that can result in the loss of data. For more information, see <a href="https://docs.aws.amazon.com/workspaces/latest/adminguide/reset-workspace.html">Rebuild a WorkSpace</a>. </para><para> This operation is asynchronous and returns before the WorkSpaces have been completely rebuilt. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.ResetWKSWorkspaceCmdlet.WorkspaceId"> <summary> The IDs of the WorkSpaces to rebuild. You can specify a single WorkSpace. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.ResetWKSWorkspaceCmdlet.Request"> <summary> <para> <para>The WorkSpace to rebuild. You can specify a single WorkSpace.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.ResetWKSWorkspaceCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'FailedRequests'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.WorkSpaces.Model.RebuildWorkspacesResponse). Specifying the name of a property of type Amazon.WorkSpaces.Model.RebuildWorkspacesResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.ResetWKSWorkspaceCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the Request parameter. The -PassThru parameter is deprecated, use -Select '^Request' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.ResetWKSWorkspaceCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.WKS.RestartWKSWorkspaceCmdlet"> <summary> Reboots the specified WorkSpaces. <para> You cannot reboot a WorkSpace unless its state is <code>AVAILABLE</code> or <code>UNHEALTHY</code>. </para><para> This operation is asynchronous and returns before the WorkSpaces have rebooted. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.RestartWKSWorkspaceCmdlet.WorkspaceId"> <summary> The IDs of one or more WorkSpaces to reboot. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.RestartWKSWorkspaceCmdlet.Request"> <summary> <para> <para>The WorkSpaces to reboot. You can specify up to 25 WorkSpaces.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.RestartWKSWorkspaceCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'FailedRequests'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.WorkSpaces.Model.RebootWorkspacesResponse). Specifying the name of a property of type Amazon.WorkSpaces.Model.RebootWorkspacesResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.RestartWKSWorkspaceCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the Request parameter. The -PassThru parameter is deprecated, use -Select '^Request' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.RestartWKSWorkspaceCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.WKS.StartWKSWorkspaceCmdlet"> <summary> Starts the specified WorkSpaces. <para> You cannot start a WorkSpace unless it has a running mode of <code>AutoStop</code> and a state of <code>STOPPED</code>. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.StartWKSWorkspaceCmdlet.WorkspaceId"> <summary> The IDs of one or more WorkSpaces to start. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.StartWKSWorkspaceCmdlet.Request"> <summary> <para> <para>The WorkSpaces to start. You can specify up to 25 WorkSpaces.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.StartWKSWorkspaceCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'FailedRequests'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.WorkSpaces.Model.StartWorkspacesResponse). Specifying the name of a property of type Amazon.WorkSpaces.Model.StartWorkspacesResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.StartWKSWorkspaceCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the Request parameter. The -PassThru parameter is deprecated, use -Select '^Request' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.StartWKSWorkspaceCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.WKS.StopWKSWorkspaceCmdlet"> <summary> Stops the specified WorkSpaces. <para> You cannot stop a WorkSpace unless it has a running mode of <code>AutoStop</code> and a state of <code>AVAILABLE</code>, <code>IMPAIRED</code>, <code>UNHEALTHY</code>, or <code>ERROR</code>. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.StopWKSWorkspaceCmdlet.WorkspaceId"> <summary> The IDs of one or more WorkSpaces to be stopped. </summary> <returns></returns> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.StopWKSWorkspaceCmdlet.Request"> <summary> <para> <para>The WorkSpaces to stop. You can specify up to 25 WorkSpaces.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.StopWKSWorkspaceCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'FailedRequests'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.WorkSpaces.Model.StopWorkspacesResponse). Specifying the name of a property of type Amazon.WorkSpaces.Model.StopWorkspacesResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.StopWKSWorkspaceCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the Request parameter. The -PassThru parameter is deprecated, use -Select '^Request' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.StopWKSWorkspaceCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.WKS.ApproveWKSIpRuleCmdlet"> <summary> Adds one or more rules to the specified IP access control group. <para> This action gives users permission to access their WorkSpaces from the CIDR address ranges specified in the rules. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.ApproveWKSIpRuleCmdlet.GroupId"> <summary> <para> <para>The identifier of the group.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.ApproveWKSIpRuleCmdlet.UserRule"> <summary> <para> <para>The rules to add to the group.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.ApproveWKSIpRuleCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.WorkSpaces.Model.AuthorizeIpRulesResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.ApproveWKSIpRuleCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the GroupId parameter. The -PassThru parameter is deprecated, use -Select '^GroupId' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.ApproveWKSIpRuleCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.WKS.CopyWKSWorkspaceImageCmdlet"> <summary> Copies the specified image from the specified Region to the current Region. For more information about copying images, see <a href="https://docs.aws.amazon.com/workspaces/latest/adminguide/copy-custom-image.html"> Copy a Custom WorkSpaces Image</a>. <para> In the China (Ningxia) Region, you can copy images only within the same Region. </para><para> In Amazon Web Services GovCloud (US), to copy images to and from other Regions, contact Amazon Web Services Support. </para><important><para> Before copying a shared image, be sure to verify that it has been shared from the correct Amazon Web Services account. To determine if an image has been shared and to see the ID of the Amazon Web Services account that owns an image, use the <a href="https://docs.aws.amazon.com/workspaces/latest/api/API_DescribeWorkspaceImages.html">DescribeWorkSpaceImages</a> and <a href="https://docs.aws.amazon.com/workspaces/latest/api/API_DescribeWorkspaceImagePermissions.html">DescribeWorkspaceImagePermissions</a> API operations. </para></important> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.CopyWKSWorkspaceImageCmdlet.Description"> <summary> <para> <para>A description of the image.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.CopyWKSWorkspaceImageCmdlet.Name"> <summary> <para> <para>The name of the image.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.CopyWKSWorkspaceImageCmdlet.SourceImageId"> <summary> <para> <para>The identifier of the source image.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.CopyWKSWorkspaceImageCmdlet.SourceRegion"> <summary> <para> <para>The identifier of the source Region.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.CopyWKSWorkspaceImageCmdlet.Tag"> <summary> <para> <para>The tags for the image.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.CopyWKSWorkspaceImageCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'ImageId'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.WorkSpaces.Model.CopyWorkspaceImageResponse). Specifying the name of a property of type Amazon.WorkSpaces.Model.CopyWorkspaceImageResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.CopyWKSWorkspaceImageCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the SourceImageId parameter. The -PassThru parameter is deprecated, use -Select '^SourceImageId' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.CopyWKSWorkspaceImageCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.WKS.EditWKSAccountCmdlet"> <summary> Modifies the configuration of Bring Your Own License (BYOL) for the specified account. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.EditWKSAccountCmdlet.DedicatedTenancyManagementCidrRange"> <summary> <para> <para>The IP address range, specified as an IPv4 CIDR block, for the management network interface. Specify an IP address range that is compatible with your network and in CIDR notation (that is, specify the range as an IPv4 CIDR block). The CIDR block size must be /16 (for example, 203.0.113.25/16). It must also be specified as available by the <code>ListAvailableManagementCidrRanges</code> operation.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.EditWKSAccountCmdlet.DedicatedTenancySupport"> <summary> <para> <para>The status of BYOL.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.EditWKSAccountCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.WorkSpaces.Model.ModifyAccountResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.EditWKSAccountCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.WKS.EditWKSClientPropertyCmdlet"> <summary> Modifies the properties of the specified Amazon WorkSpaces clients. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.EditWKSClientPropertyCmdlet.ClientProperties_ReconnectEnabled"> <summary> <para> <para>Specifies whether users can cache their credentials on the Amazon WorkSpaces client. When enabled, users can choose to reconnect to their WorkSpaces without re-entering their credentials. </para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.EditWKSClientPropertyCmdlet.ResourceId"> <summary> <para> <para>The resource identifiers, in the form of directory IDs.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.EditWKSClientPropertyCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.WorkSpaces.Model.ModifyClientPropertiesResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.EditWKSClientPropertyCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the ClientProperties_ReconnectEnabled parameter. The -PassThru parameter is deprecated, use -Select '^ClientProperties_ReconnectEnabled' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.EditWKSClientPropertyCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.WKS.EditWKSSelfservicePermissionCmdlet"> <summary> Modifies the self-service WorkSpace management capabilities for your users. For more information, see <a href="https://docs.aws.amazon.com/workspaces/latest/adminguide/enable-user-self-service-workspace-management.html">Enable Self-Service WorkSpace Management Capabilities for Your Users</a>. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.EditWKSSelfservicePermissionCmdlet.SelfservicePermissions_ChangeComputeType"> <summary> <para> <para>Specifies whether users can change the compute type (bundle) for their WorkSpace.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.EditWKSSelfservicePermissionCmdlet.SelfservicePermissions_IncreaseVolumeSize"> <summary> <para> <para>Specifies whether users can increase the volume size of the drives on their WorkSpace.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.EditWKSSelfservicePermissionCmdlet.SelfservicePermissions_RebuildWorkspace"> <summary> <para> <para>Specifies whether users can rebuild the operating system of a WorkSpace to its original state.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.EditWKSSelfservicePermissionCmdlet.ResourceId"> <summary> <para> <para>The identifier of the directory.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.EditWKSSelfservicePermissionCmdlet.SelfservicePermissions_RestartWorkspace"> <summary> <para> <para>Specifies whether users can restart their WorkSpace.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.EditWKSSelfservicePermissionCmdlet.SelfservicePermissions_SwitchRunningMode"> <summary> <para> <para>Specifies whether users can switch the running mode of their WorkSpace.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.EditWKSSelfservicePermissionCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.WorkSpaces.Model.ModifySelfservicePermissionsResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.EditWKSSelfservicePermissionCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the ResourceId parameter. The -PassThru parameter is deprecated, use -Select '^ResourceId' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.EditWKSSelfservicePermissionCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.WKS.EditWKSWorkspaceAccessPropertyCmdlet"> <summary> Specifies which devices and operating systems users can use to access their WorkSpaces. For more information, see <a href="https://docs.aws.amazon.com/workspaces/latest/adminguide/update-directory-details.html#control-device-access"> Control Device Access</a>. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.EditWKSWorkspaceAccessPropertyCmdlet.WorkspaceAccessProperties_DeviceTypeAndroid"> <summary> <para> <para>Indicates whether users can use Android and Android-compatible Chrome OS devices to access their WorkSpaces.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.EditWKSWorkspaceAccessPropertyCmdlet.WorkspaceAccessProperties_DeviceTypeChromeOs"> <summary> <para> <para>Indicates whether users can use Chromebooks to access their WorkSpaces.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.EditWKSWorkspaceAccessPropertyCmdlet.WorkspaceAccessProperties_DeviceTypeIo"> <summary> <para> <para>Indicates whether users can use iOS devices to access their WorkSpaces.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.EditWKSWorkspaceAccessPropertyCmdlet.WorkspaceAccessProperties_DeviceTypeLinux"> <summary> <para> <para>Indicates whether users can use Linux clients to access their WorkSpaces.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.EditWKSWorkspaceAccessPropertyCmdlet.WorkspaceAccessProperties_DeviceTypeOsx"> <summary> <para> <para>Indicates whether users can use macOS clients to access their WorkSpaces.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.EditWKSWorkspaceAccessPropertyCmdlet.WorkspaceAccessProperties_DeviceTypeWeb"> <summary> <para> <para>Indicates whether users can access their WorkSpaces through a web browser.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.EditWKSWorkspaceAccessPropertyCmdlet.WorkspaceAccessProperties_DeviceTypeWindow"> <summary> <para> <para>Indicates whether users can use Windows clients to access their WorkSpaces.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.EditWKSWorkspaceAccessPropertyCmdlet.WorkspaceAccessProperties_DeviceTypeZeroClient"> <summary> <para> <para>Indicates whether users can use zero client devices to access their WorkSpaces.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.EditWKSWorkspaceAccessPropertyCmdlet.ResourceId"> <summary> <para> <para>The identifier of the directory.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.EditWKSWorkspaceAccessPropertyCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.WorkSpaces.Model.ModifyWorkspaceAccessPropertiesResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.EditWKSWorkspaceAccessPropertyCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the ResourceId parameter. The -PassThru parameter is deprecated, use -Select '^ResourceId' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.EditWKSWorkspaceAccessPropertyCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.WKS.EditWKSWorkspaceCreationPropertyCmdlet"> <summary> Modify the default properties used to create WorkSpaces. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.EditWKSWorkspaceCreationPropertyCmdlet.WorkspaceCreationProperties_CustomSecurityGroupId"> <summary> <para> <para>The identifier of your custom security group.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.EditWKSWorkspaceCreationPropertyCmdlet.WorkspaceCreationProperties_DefaultOu"> <summary> <para> <para>The default organizational unit (OU) for your WorkSpaces directories. This string must be the full Lightweight Directory Access Protocol (LDAP) distinguished name for the target domain and OU. It must be in the form <code>"OU=<i>value</i>,DC=<i>value</i>,DC=<i>value</i>"</code>, where <i>value</i> is any string of characters, and the number of domain components (DCs) is two or more. For example, <code>OU=WorkSpaces_machines,DC=machines,DC=example,DC=com</code>. </para><important><ul><li><para>To avoid errors, certain characters in the distinguished name must be escaped. For more information, see <a href="https://docs.microsoft.com/previous-versions/windows/desktop/ldap/distinguished-names"> Distinguished Names</a> in the Microsoft documentation.</para></li><li><para>The API doesn't validate whether the OU exists.</para></li></ul></important> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.EditWKSWorkspaceCreationPropertyCmdlet.WorkspaceCreationProperties_EnableInternetAccess"> <summary> <para> <para>Indicates whether internet access is enabled for your WorkSpaces.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.EditWKSWorkspaceCreationPropertyCmdlet.WorkspaceCreationProperties_EnableMaintenanceMode"> <summary> <para> <para>Indicates whether maintenance mode is enabled for your WorkSpaces. For more information, see <a href="https://docs.aws.amazon.com/workspaces/latest/adminguide/workspace-maintenance.html">WorkSpace Maintenance</a>. </para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.EditWKSWorkspaceCreationPropertyCmdlet.WorkspaceCreationProperties_EnableWorkDoc"> <summary> <para> <para>Indicates whether Amazon WorkDocs is enabled for your WorkSpaces.</para><note><para>If WorkDocs is already enabled for a WorkSpaces directory and you disable it, new WorkSpaces launched in the directory will not have WorkDocs enabled. However, WorkDocs remains enabled for any existing WorkSpaces, unless you either disable users' access to WorkDocs or you delete the WorkDocs site. To disable users' access to WorkDocs, see <a href="https://docs.aws.amazon.com/workdocs/latest/adminguide/inactive-user.html">Disabling Users</a> in the <i>Amazon WorkDocs Administration Guide</i>. To delete a WorkDocs site, see <a href="https://docs.aws.amazon.com/workdocs/latest/adminguide/manage-sites.html">Deleting a Site</a> in the <i>Amazon WorkDocs Administration Guide</i>.</para><para>If you enable WorkDocs on a directory that already has existing WorkSpaces, the existing WorkSpaces and any new WorkSpaces that are launched in the directory will have WorkDocs enabled.</para></note> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.EditWKSWorkspaceCreationPropertyCmdlet.ResourceId"> <summary> <para> <para>The identifier of the directory.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.EditWKSWorkspaceCreationPropertyCmdlet.WorkspaceCreationProperties_UserEnabledAsLocalAdministrator"> <summary> <para> <para>Indicates whether users are local administrators of their WorkSpaces.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.EditWKSWorkspaceCreationPropertyCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.WorkSpaces.Model.ModifyWorkspaceCreationPropertiesResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.EditWKSWorkspaceCreationPropertyCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the ResourceId parameter. The -PassThru parameter is deprecated, use -Select '^ResourceId' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.EditWKSWorkspaceCreationPropertyCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.WKS.EditWKSWorkspacePropertyCmdlet"> <summary> Modifies the specified WorkSpace properties. For important information about how to modify the size of the root and user volumes, see <a href="https://docs.aws.amazon.com/workspaces/latest/adminguide/modify-workspaces.html"> Modify a WorkSpace</a>. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.EditWKSWorkspacePropertyCmdlet.WorkspaceProperties_ComputeTypeName"> <summary> <para> <para>The compute type. For more information, see <a href="http://aws.amazon.com/workspaces/details/#Amazon_WorkSpaces_Bundles">Amazon WorkSpaces Bundles</a>.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.EditWKSWorkspacePropertyCmdlet.WorkspaceProperties_RootVolumeSizeGib"> <summary> <para> <para>The size of the root volume. For important information about how to modify the size of the root and user volumes, see <a href="https://docs.aws.amazon.com/workspaces/latest/adminguide/modify-workspaces.html">Modify a WorkSpace</a>.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.EditWKSWorkspacePropertyCmdlet.WorkspaceProperties_RunningMode"> <summary> <para> <para>The running mode. For more information, see <a href="https://docs.aws.amazon.com/workspaces/latest/adminguide/running-mode.html">Manage the WorkSpace Running Mode</a>.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.EditWKSWorkspacePropertyCmdlet.WorkspaceProperties_RunningModeAutoStopTimeoutInMinute"> <summary> <para> <para>The time after a user logs off when WorkSpaces are automatically stopped. Configured in 60-minute intervals.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.EditWKSWorkspacePropertyCmdlet.WorkspaceProperties_UserVolumeSizeGib"> <summary> <para> <para>The size of the user storage. For important information about how to modify the size of the root and user volumes, see <a href="https://docs.aws.amazon.com/workspaces/latest/adminguide/modify-workspaces.html">Modify a WorkSpace</a>.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.EditWKSWorkspacePropertyCmdlet.WorkspaceId"> <summary> <para> <para>The identifier of the WorkSpace.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.EditWKSWorkspacePropertyCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.WorkSpaces.Model.ModifyWorkspacePropertiesResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.EditWKSWorkspacePropertyCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the WorkspaceId parameter. The -PassThru parameter is deprecated, use -Select '^WorkspaceId' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.EditWKSWorkspacePropertyCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.WKS.EditWKSWorkspaceStateCmdlet"> <summary> Sets the state of the specified WorkSpace. <para> To maintain a WorkSpace without being interrupted, set the WorkSpace state to <code>ADMIN_MAINTENANCE</code>. WorkSpaces in this state do not respond to requests to reboot, stop, start, rebuild, or restore. An AutoStop WorkSpace in this state is not stopped. Users cannot log into a WorkSpace in the <code>ADMIN_MAINTENANCE</code> state. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.EditWKSWorkspaceStateCmdlet.WorkspaceId"> <summary> <para> <para>The identifier of the WorkSpace.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.EditWKSWorkspaceStateCmdlet.WorkspaceState"> <summary> <para> <para>The WorkSpace state.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.EditWKSWorkspaceStateCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.WorkSpaces.Model.ModifyWorkspaceStateResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.EditWKSWorkspaceStateCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the WorkspaceId parameter. The -PassThru parameter is deprecated, use -Select '^WorkspaceId' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.EditWKSWorkspaceStateCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.WKS.GetWKSAccountCmdlet"> <summary> Retrieves a list that describes the configuration of Bring Your Own License (BYOL) for the specified account. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.GetWKSAccountCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is '*'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.WorkSpaces.Model.DescribeAccountResponse). Specifying the name of a property of type Amazon.WorkSpaces.Model.DescribeAccountResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.WKS.GetWKSAccountModificationCmdlet"> <summary> Retrieves a list that describes modifications to the configuration of Bring Your Own License (BYOL) for the specified account.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.GetWKSAccountModificationCmdlet.NextToken"> <summary> <para> <para>If you received a <code>NextToken</code> from a previous call that was paginated, provide this token to receive the next set of results.</para> </para> <para> <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call. <br/>In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.GetWKSAccountModificationCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'AccountModifications'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.WorkSpaces.Model.DescribeAccountModificationsResponse). Specifying the name of a property of type Amazon.WorkSpaces.Model.DescribeAccountModificationsResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.GetWKSAccountModificationCmdlet.NoAutoIteration"> <summary> By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken as the start point. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.WKS.GetWKSAvailableManagementCidrRangeListCmdlet"> <summary> Retrieves a list of IP address ranges, specified as IPv4 CIDR blocks, that you can use for the network management interface when you enable Bring Your Own License (BYOL). <para> This operation can be run only by Amazon Web Services accounts that are enabled for BYOL. If your account isn't enabled for BYOL, you'll receive an <code>AccessDeniedException</code> error. </para><para> The management network interface is connected to a secure Amazon WorkSpaces management network. It is used for interactive streaming of the WorkSpace desktop to Amazon WorkSpaces clients, and to allow Amazon WorkSpaces to manage the WorkSpace. </para><br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.GetWKSAvailableManagementCidrRangeListCmdlet.ManagementCidrRangeConstraint"> <summary> <para> <para>The IP address range to search. Specify an IP address range that is compatible with your network and in CIDR notation (that is, specify the range as an IPv4 CIDR block).</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.GetWKSAvailableManagementCidrRangeListCmdlet.MaxResult"> <summary> <para> <para>The maximum number of items to return.</para> </para> <para> <br/><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet. <br/>In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call. <br/>Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.GetWKSAvailableManagementCidrRangeListCmdlet.NextToken"> <summary> <para> <para>If you received a <code>NextToken</code> from a previous call that was paginated, provide this token to receive the next set of results.</para> </para> <para> <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call. <br/>In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.GetWKSAvailableManagementCidrRangeListCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'ManagementCidrRanges'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.WorkSpaces.Model.ListAvailableManagementCidrRangesResponse). Specifying the name of a property of type Amazon.WorkSpaces.Model.ListAvailableManagementCidrRangesResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.GetWKSAvailableManagementCidrRangeListCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the ManagementCidrRangeConstraint parameter. The -PassThru parameter is deprecated, use -Select '^ManagementCidrRangeConstraint' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.GetWKSAvailableManagementCidrRangeListCmdlet.NoAutoIteration"> <summary> By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken as the start point. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.WKS.GetWKSClientPropertyCmdlet"> <summary> Retrieves a list that describes one or more specified Amazon WorkSpaces clients. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.GetWKSClientPropertyCmdlet.ResourceId"> <summary> <para> <para>The resource identifier, in the form of directory IDs.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.GetWKSClientPropertyCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'ClientPropertiesList'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.WorkSpaces.Model.DescribeClientPropertiesResponse). Specifying the name of a property of type Amazon.WorkSpaces.Model.DescribeClientPropertiesResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.GetWKSClientPropertyCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the ResourceId parameter. The -PassThru parameter is deprecated, use -Select '^ResourceId' instead. This parameter will be removed in a future version. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.WKS.GetWKSConnectClientAddInCmdlet"> <summary> Retrieves a list of Amazon Connect client add-ins that have been created.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.GetWKSConnectClientAddInCmdlet.ResourceId"> <summary> <para> <para>The directory identifier for which the client add-in is configured.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.GetWKSConnectClientAddInCmdlet.MaxResult"> <summary> <para> <para>The maximum number of items to return.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.GetWKSConnectClientAddInCmdlet.NextToken"> <summary> <para> <para>If you received a <code>NextToken</code> from a previous call that was paginated, provide this token to receive the next set of results.</para> </para> <para> <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call. <br/>In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.GetWKSConnectClientAddInCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'AddIns'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.WorkSpaces.Model.DescribeConnectClientAddInsResponse). Specifying the name of a property of type Amazon.WorkSpaces.Model.DescribeConnectClientAddInsResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.GetWKSConnectClientAddInCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the ResourceId parameter. The -PassThru parameter is deprecated, use -Select '^ResourceId' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.GetWKSConnectClientAddInCmdlet.NoAutoIteration"> <summary> By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken as the start point. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.WKS.GetWKSConnectionAliasCmdlet"> <summary> Retrieves a list that describes the connection aliases used for cross-Region redirection. For more information, see <a href="https://docs.aws.amazon.com/workspaces/latest/adminguide/cross-region-redirection.html"> Cross-Region Redirection for Amazon WorkSpaces</a>.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.GetWKSConnectionAliasCmdlet.AliasId"> <summary> <para> <para>The identifiers of the connection aliases to describe.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.GetWKSConnectionAliasCmdlet.ResourceId"> <summary> <para> <para>The identifier of the directory associated with the connection alias.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.GetWKSConnectionAliasCmdlet.Limit"> <summary> <para> <para>The maximum number of connection aliases to return.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.GetWKSConnectionAliasCmdlet.NextToken"> <summary> <para> <para>If you received a <code>NextToken</code> from a previous call that was paginated, provide this token to receive the next set of results. </para> </para> <para> <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call. <br/>In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.GetWKSConnectionAliasCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'ConnectionAliases'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.WorkSpaces.Model.DescribeConnectionAliasesResponse). Specifying the name of a property of type Amazon.WorkSpaces.Model.DescribeConnectionAliasesResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.GetWKSConnectionAliasCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the ResourceId parameter. The -PassThru parameter is deprecated, use -Select '^ResourceId' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.GetWKSConnectionAliasCmdlet.NoAutoIteration"> <summary> By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken as the start point. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.WKS.GetWKSConnectionAliasPermissionCmdlet"> <summary> Describes the permissions that the owner of a connection alias has granted to another Amazon Web Services account for the specified connection alias. For more information, see <a href="https://docs.aws.amazon.com/workspaces/latest/adminguide/cross-region-redirection.html"> Cross-Region Redirection for Amazon WorkSpaces</a>.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.GetWKSConnectionAliasPermissionCmdlet.AliasId"> <summary> <para> <para>The identifier of the connection alias.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.GetWKSConnectionAliasPermissionCmdlet.MaxResult"> <summary> <para> <para>The maximum number of results to return.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.GetWKSConnectionAliasPermissionCmdlet.NextToken"> <summary> <para> <para>If you received a <code>NextToken</code> from a previous call that was paginated, provide this token to receive the next set of results. </para> </para> <para> <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call. <br/>In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.GetWKSConnectionAliasPermissionCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is '*'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.WorkSpaces.Model.DescribeConnectionAliasPermissionsResponse). Specifying the name of a property of type Amazon.WorkSpaces.Model.DescribeConnectionAliasPermissionsResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.GetWKSConnectionAliasPermissionCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the AliasId parameter. The -PassThru parameter is deprecated, use -Select '^AliasId' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.GetWKSConnectionAliasPermissionCmdlet.NoAutoIteration"> <summary> By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken as the start point. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.WKS.GetWKSIpGroupCmdlet"> <summary> Describes one or more of your IP access control groups.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.GetWKSIpGroupCmdlet.GroupId"> <summary> <para> <para>The identifiers of one or more IP access control groups.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.GetWKSIpGroupCmdlet.MaxResult"> <summary> <para> <para>The maximum number of items to return.</para> </para> <para> <br/><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet. <br/>In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call. <br/>Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.GetWKSIpGroupCmdlet.NextToken"> <summary> <para> <para>If you received a <code>NextToken</code> from a previous call that was paginated, provide this token to receive the next set of results.</para> </para> <para> <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call. <br/>In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.GetWKSIpGroupCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'Result'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.WorkSpaces.Model.DescribeIpGroupsResponse). Specifying the name of a property of type Amazon.WorkSpaces.Model.DescribeIpGroupsResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.GetWKSIpGroupCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the GroupId parameter. The -PassThru parameter is deprecated, use -Select '^GroupId' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.GetWKSIpGroupCmdlet.NoAutoIteration"> <summary> By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken as the start point. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.WKS.GetWKSTagCmdlet"> <summary> Describes the specified tags for the specified WorkSpaces resource. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.GetWKSTagCmdlet.WorkspaceId"> <summary> <para> <para>The identifier of the WorkSpaces resource. The supported resource types are WorkSpaces, registered directories, images, custom bundles, IP access control groups, and connection aliases.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.GetWKSTagCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'TagList'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.WorkSpaces.Model.DescribeTagsResponse). Specifying the name of a property of type Amazon.WorkSpaces.Model.DescribeTagsResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.GetWKSTagCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the WorkspaceId parameter. The -PassThru parameter is deprecated, use -Select '^WorkspaceId' instead. This parameter will be removed in a future version. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.WKS.GetWKSWorkspaceCmdlet"> <summary> Describes the specified WorkSpaces. <para> You can filter the results by using the bundle identifier, directory identifier, or owner, but you can specify only one filter at a time. </para><br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.GetWKSWorkspaceCmdlet.BundleId"> <summary> <para> <para>The identifier of the bundle. All WorkSpaces that are created from this bundle are retrieved. You cannot combine this parameter with any other filter.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.GetWKSWorkspaceCmdlet.DirectoryId"> <summary> <para> <para>The identifier of the directory. In addition, you can optionally specify a specific directory user (see <code>UserName</code>). You cannot combine this parameter with any other filter.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.GetWKSWorkspaceCmdlet.UserName"> <summary> <para> <para>The name of the directory user. You must specify this parameter with <code>DirectoryId</code>.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.GetWKSWorkspaceCmdlet.WorkspaceId"> <summary> <para> <para>The identifiers of the WorkSpaces. You cannot combine this parameter with any other filter.</para><para>Because the <a>CreateWorkspaces</a> operation is asynchronous, the identifier it returns is not immediately available. If you immediately call <a>DescribeWorkspaces</a> with this identifier, no information is returned.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.GetWKSWorkspaceCmdlet.Limit"> <summary> <para> <para>The maximum number of items to return.</para> </para> <para> <br/><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet. <br/>In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call. <br/>Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.GetWKSWorkspaceCmdlet.NextToken"> <summary> <para> <para>If you received a <code>NextToken</code> from a previous call that was paginated, provide this token to receive the next set of results.</para> </para> <para> <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call. <br/>In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.GetWKSWorkspaceCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'Workspaces'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.WorkSpaces.Model.DescribeWorkspacesResponse). Specifying the name of a property of type Amazon.WorkSpaces.Model.DescribeWorkspacesResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.GetWKSWorkspaceCmdlet.NoAutoIteration"> <summary> By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken as the start point. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.WKS.GetWKSWorkspaceBundleCmdlet"> <summary> Retrieves a list that describes the available WorkSpace bundles. <para> You can filter the results using either bundle ID or owner, but not both. </para><br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.GetWKSWorkspaceBundleCmdlet.BundleId"> <summary> <para> <para>The identifiers of the bundles. You cannot combine this parameter with any other filter.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.GetWKSWorkspaceBundleCmdlet.NextToken"> <summary> <para> <para>The token for the next set of results. (You received this token from a previous call.)</para> </para> <para> <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call. <br/>In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.GetWKSWorkspaceBundleCmdlet.Owner"> <summary> <para> <para>The owner of the bundles. You cannot combine this parameter with any other filter.</para><para>To describe the bundles provided by Amazon Web Services, specify <code>AMAZON</code>. To describe the bundles that belong to your account, don't specify a value.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.GetWKSWorkspaceBundleCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'Bundles'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.WorkSpaces.Model.DescribeWorkspaceBundlesResponse). Specifying the name of a property of type Amazon.WorkSpaces.Model.DescribeWorkspaceBundlesResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.GetWKSWorkspaceBundleCmdlet.NoAutoIteration"> <summary> By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken as the start point. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.WKS.GetWKSWorkspaceDirectoryCmdlet"> <summary> Describes the available directories that are registered with Amazon WorkSpaces.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.GetWKSWorkspaceDirectoryCmdlet.DirectoryId"> <summary> <para> <para>The identifiers of the directories. If the value is null, all directories are retrieved.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.GetWKSWorkspaceDirectoryCmdlet.Limit"> <summary> <para> <para>The maximum number of directories to return.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.GetWKSWorkspaceDirectoryCmdlet.NextToken"> <summary> <para> <para>If you received a <code>NextToken</code> from a previous call that was paginated, provide this token to receive the next set of results.</para> </para> <para> <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call. <br/>In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.GetWKSWorkspaceDirectoryCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'Directories'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.WorkSpaces.Model.DescribeWorkspaceDirectoriesResponse). Specifying the name of a property of type Amazon.WorkSpaces.Model.DescribeWorkspaceDirectoriesResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.GetWKSWorkspaceDirectoryCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the DirectoryId parameter. The -PassThru parameter is deprecated, use -Select '^DirectoryId' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.GetWKSWorkspaceDirectoryCmdlet.NoAutoIteration"> <summary> By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken as the start point. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.WKS.GetWKSWorkspaceImageCmdlet"> <summary> Retrieves a list that describes one or more specified images, if the image identifiers are provided. Otherwise, all images in the account are described.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.GetWKSWorkspaceImageCmdlet.ImageId"> <summary> <para> <para>The identifier of the image.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.GetWKSWorkspaceImageCmdlet.ImageType"> <summary> <para> <para>The type (owned or shared) of the image.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.GetWKSWorkspaceImageCmdlet.MaxResult"> <summary> <para> <para>The maximum number of items to return.</para> </para> <para> <br/><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet. <br/>In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call. <br/>Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.GetWKSWorkspaceImageCmdlet.NextToken"> <summary> <para> <para>If you received a <code>NextToken</code> from a previous call that was paginated, provide this token to receive the next set of results.</para> </para> <para> <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call. <br/>In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.GetWKSWorkspaceImageCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'Images'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.WorkSpaces.Model.DescribeWorkspaceImagesResponse). Specifying the name of a property of type Amazon.WorkSpaces.Model.DescribeWorkspaceImagesResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.GetWKSWorkspaceImageCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the ImageId parameter. The -PassThru parameter is deprecated, use -Select '^ImageId' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.GetWKSWorkspaceImageCmdlet.NoAutoIteration"> <summary> By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken as the start point. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.WKS.GetWKSWorkspaceImagePermissionCmdlet"> <summary> Describes the permissions that the owner of an image has granted to other Amazon Web Services accounts for an image.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.GetWKSWorkspaceImagePermissionCmdlet.ImageId"> <summary> <para> <para>The identifier of the image.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.GetWKSWorkspaceImagePermissionCmdlet.MaxResult"> <summary> <para> <para>The maximum number of items to return.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.GetWKSWorkspaceImagePermissionCmdlet.NextToken"> <summary> <para> <para>If you received a <code>NextToken</code> from a previous call that was paginated, provide this token to receive the next set of results.</para> </para> <para> <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call. <br/>In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.GetWKSWorkspaceImagePermissionCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is '*'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.WorkSpaces.Model.DescribeWorkspaceImagePermissionsResponse). Specifying the name of a property of type Amazon.WorkSpaces.Model.DescribeWorkspaceImagePermissionsResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.GetWKSWorkspaceImagePermissionCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the ImageId parameter. The -PassThru parameter is deprecated, use -Select '^ImageId' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.GetWKSWorkspaceImagePermissionCmdlet.NoAutoIteration"> <summary> By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken as the start point. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.WKS.GetWKSWorkspacesConnectionStatusCmdlet"> <summary> Describes the connection status of the specified WorkSpaces.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.GetWKSWorkspacesConnectionStatusCmdlet.WorkspaceId"> <summary> <para> <para>The identifiers of the WorkSpaces. You can specify up to 25 WorkSpaces.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.GetWKSWorkspacesConnectionStatusCmdlet.NextToken"> <summary> <para> <para>If you received a <code>NextToken</code> from a previous call that was paginated, provide this token to receive the next set of results.</para> </para> <para> <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call. <br/>In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.GetWKSWorkspacesConnectionStatusCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'WorkspacesConnectionStatus'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.WorkSpaces.Model.DescribeWorkspacesConnectionStatusResponse). Specifying the name of a property of type Amazon.WorkSpaces.Model.DescribeWorkspacesConnectionStatusResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.GetWKSWorkspacesConnectionStatusCmdlet.NoAutoIteration"> <summary> By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken as the start point. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.WKS.GetWKSWorkspaceSnapshotCmdlet"> <summary> Describes the snapshots for the specified WorkSpace. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.GetWKSWorkspaceSnapshotCmdlet.WorkspaceId"> <summary> <para> <para>The identifier of the WorkSpace.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.GetWKSWorkspaceSnapshotCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is '*'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.WorkSpaces.Model.DescribeWorkspaceSnapshotsResponse). Specifying the name of a property of type Amazon.WorkSpaces.Model.DescribeWorkspaceSnapshotsResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.GetWKSWorkspaceSnapshotCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the WorkspaceId parameter. The -PassThru parameter is deprecated, use -Select '^WorkspaceId' instead. This parameter will be removed in a future version. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.WKS.ImportWKSWorkspaceImageCmdlet"> <summary> Imports the specified Windows 10 Bring Your Own License (BYOL) image into Amazon WorkSpaces. The image must be an already licensed Amazon EC2 image that is in your Amazon Web Services account, and you must own the image. For more information about creating BYOL images, see <a href="https://docs.aws.amazon.com/workspaces/latest/adminguide/byol-windows-images.html"> Bring Your Own Windows Desktop Licenses</a>. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.ImportWKSWorkspaceImageCmdlet.Application"> <summary> <para> <para>If specified, the version of Microsoft Office to subscribe to. Valid only for Windows 10 BYOL images. For more information about subscribing to Office for BYOL images, see <a href="https://docs.aws.amazon.com/workspaces/latest/adminguide/byol-windows-images.html"> Bring Your Own Windows Desktop Licenses</a>.</para><note><para>Although this parameter is an array, only one item is allowed at this time.</para></note> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.ImportWKSWorkspaceImageCmdlet.Ec2ImageId"> <summary> <para> <para>The identifier of the EC2 image.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.ImportWKSWorkspaceImageCmdlet.ImageDescription"> <summary> <para> <para>The description of the WorkSpace image.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.ImportWKSWorkspaceImageCmdlet.ImageName"> <summary> <para> <para>The name of the WorkSpace image.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.ImportWKSWorkspaceImageCmdlet.IngestionProcess"> <summary> <para> <para>The ingestion process to be used when importing the image, depending on which protocol you want to use for your BYOL Workspace image, either PCoIP or WorkSpaces Streaming Protocol (WSP). To use WSP, specify a value that ends in <code>_WSP</code>. To use PCoIP, specify a value that does not end in <code>_WSP</code>. </para><para>For non-GPU-enabled bundles (bundles other than Graphics or GraphicsPro), specify <code>BYOL_REGULAR</code> or <code>BYOL_REGULAR_WSP</code>, depending on the protocol.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.ImportWKSWorkspaceImageCmdlet.Tag"> <summary> <para> <para>The tags. Each WorkSpaces resource can have a maximum of 50 tags.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.ImportWKSWorkspaceImageCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'ImageId'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.WorkSpaces.Model.ImportWorkspaceImageResponse). Specifying the name of a property of type Amazon.WorkSpaces.Model.ImportWorkspaceImageResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.ImportWKSWorkspaceImageCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the ImageName parameter. The -PassThru parameter is deprecated, use -Select '^ImageName' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.ImportWKSWorkspaceImageCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.WKS.NewWKSConnectClientAddInCmdlet"> <summary> Creates a client-add-in for Amazon Connect within a directory. You can create only one Amazon Connect client add-in within a directory. <para> This client add-in allows WorkSpaces users to seamlessly connect to Amazon Connect. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.NewWKSConnectClientAddInCmdlet.Name"> <summary> <para> <para>The name of the client add-in.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.NewWKSConnectClientAddInCmdlet.ResourceId"> <summary> <para> <para>The directory identifier for which to configure the client add-in.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.NewWKSConnectClientAddInCmdlet.URL"> <summary> <para> <para>The endpoint URL of the Amazon Connect client add-in.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.NewWKSConnectClientAddInCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'AddInId'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.WorkSpaces.Model.CreateConnectClientAddInResponse). Specifying the name of a property of type Amazon.WorkSpaces.Model.CreateConnectClientAddInResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.NewWKSConnectClientAddInCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the ResourceId parameter. The -PassThru parameter is deprecated, use -Select '^ResourceId' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.NewWKSConnectClientAddInCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.WKS.NewWKSConnectionAliasCmdlet"> <summary> Creates the specified connection alias for use with cross-Region redirection. For more information, see <a href="https://docs.aws.amazon.com/workspaces/latest/adminguide/cross-region-redirection.html"> Cross-Region Redirection for Amazon WorkSpaces</a>. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.NewWKSConnectionAliasCmdlet.ConnectionString"> <summary> <para> <para>A connection string in the form of a fully qualified domain name (FQDN), such as <code>www.example.com</code>.</para><important><para>After you create a connection string, it is always associated to your Amazon Web Services account. You cannot recreate the same connection string with a different account, even if you delete all instances of it from the original account. The connection string is globally reserved for your account.</para></important> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.NewWKSConnectionAliasCmdlet.Tag"> <summary> <para> <para>The tags to associate with the connection alias.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.NewWKSConnectionAliasCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'AliasId'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.WorkSpaces.Model.CreateConnectionAliasResponse). Specifying the name of a property of type Amazon.WorkSpaces.Model.CreateConnectionAliasResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.NewWKSConnectionAliasCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the ConnectionString parameter. The -PassThru parameter is deprecated, use -Select '^ConnectionString' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.NewWKSConnectionAliasCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.WKS.NewWKSIpGroupCmdlet"> <summary> Creates an IP access control group. <para> An IP access control group provides you with the ability to control the IP addresses from which users are allowed to access their WorkSpaces. To specify the CIDR address ranges, add rules to your IP access control group and then associate the group with your directory. You can add rules when you create the group or at any time using <a>AuthorizeIpRules</a>. </para><para> There is a default IP access control group associated with your directory. If you don't associate an IP access control group with your directory, the default group is used. The default group includes a default rule that allows users to access their WorkSpaces from anywhere. You cannot modify the default IP access control group for your directory. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.NewWKSIpGroupCmdlet.GroupDesc"> <summary> <para> <para>The description of the group.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.NewWKSIpGroupCmdlet.GroupName"> <summary> <para> <para>The name of the group.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.NewWKSIpGroupCmdlet.Tag"> <summary> <para> <para>The tags. Each WorkSpaces resource can have a maximum of 50 tags.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.NewWKSIpGroupCmdlet.UserRule"> <summary> <para> <para>The rules to add to the group.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.NewWKSIpGroupCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'GroupId'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.WorkSpaces.Model.CreateIpGroupResponse). Specifying the name of a property of type Amazon.WorkSpaces.Model.CreateIpGroupResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.NewWKSIpGroupCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the GroupName parameter. The -PassThru parameter is deprecated, use -Select '^GroupName' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.NewWKSIpGroupCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.WKS.NewWKSTagCmdlet"> <summary> Creates the specified tags for the specified WorkSpaces resource. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.NewWKSTagCmdlet.WorkspaceId"> <summary> <para> <para>The identifier of the WorkSpaces resource. The supported resource types are WorkSpaces, registered directories, images, custom bundles, IP access control groups, and connection aliases.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.NewWKSTagCmdlet.Tag"> <summary> <para> <para>The tags. Each WorkSpaces resource can have a maximum of 50 tags.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.NewWKSTagCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.WorkSpaces.Model.CreateTagsResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.NewWKSTagCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.WKS.NewWKSUpdatedWorkspaceImageCmdlet"> <summary> Creates a new updated WorkSpace image based on the specified source image. The new updated WorkSpace image has the latest drivers and other updates required by the Amazon WorkSpaces components. <para> To determine which WorkSpace images need to be updated with the latest Amazon WorkSpaces requirements, use <a href="https://docs.aws.amazon.com/workspaces/latest/api/API_DescribeWorkspaceImages.html"> DescribeWorkspaceImages</a>. </para><note><ul><li><para> Only Windows 10, Windows Sever 2016, and Windows Server 2019 WorkSpace images can be programmatically updated at this time. </para></li><li><para> Microsoft Windows updates and other application updates are not included in the update process. </para></li><li><para> The source WorkSpace image is not deleted. You can delete the source image after you've verified your new updated image and created a new bundle. </para></li></ul></note> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.NewWKSUpdatedWorkspaceImageCmdlet.Description"> <summary> <para> <para>A description of whether updates for the WorkSpace image are available.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.NewWKSUpdatedWorkspaceImageCmdlet.Name"> <summary> <para> <para>The name of the new updated WorkSpace image.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.NewWKSUpdatedWorkspaceImageCmdlet.SourceImageId"> <summary> <para> <para>The identifier of the source WorkSpace image.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.NewWKSUpdatedWorkspaceImageCmdlet.Tag"> <summary> <para> <para>The tags that you want to add to the new updated WorkSpace image.</para><note><para>To add tags at the same time when you're creating the updated image, you must create an IAM policy that grants your IAM user permissions to use <code>workspaces:CreateTags</code>. </para></note> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.NewWKSUpdatedWorkspaceImageCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'ImageId'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.WorkSpaces.Model.CreateUpdatedWorkspaceImageResponse). Specifying the name of a property of type Amazon.WorkSpaces.Model.CreateUpdatedWorkspaceImageResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.NewWKSUpdatedWorkspaceImageCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the SourceImageId parameter. The -PassThru parameter is deprecated, use -Select '^SourceImageId' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.NewWKSUpdatedWorkspaceImageCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.WKS.NewWKSWorkspaceCmdlet"> <summary> Creates one or more WorkSpaces. <para> This operation is asynchronous and returns before the WorkSpaces are created. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.NewWKSWorkspaceCmdlet.Workspace"> <summary> <para> <para>The WorkSpaces to create. You can specify up to 25 WorkSpaces.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.NewWKSWorkspaceCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is '*'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.WorkSpaces.Model.CreateWorkspacesResponse). Specifying the name of a property of type Amazon.WorkSpaces.Model.CreateWorkspacesResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.NewWKSWorkspaceCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the Workspace parameter. The -PassThru parameter is deprecated, use -Select '^Workspace' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.NewWKSWorkspaceCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.WKS.NewWKSWorkspaceBundleCmdlet"> <summary> Creates the specified WorkSpace bundle. For more information about creating WorkSpace bundles, see <a href="https://docs.aws.amazon.com/workspaces/latest/adminguide/create-custom-bundle.html"> Create a Custom WorkSpaces Image and Bundle</a>. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.NewWKSWorkspaceBundleCmdlet.BundleDescription"> <summary> <para> <para>The description of the bundle.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.NewWKSWorkspaceBundleCmdlet.BundleName"> <summary> <para> <para>The name of the bundle.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.NewWKSWorkspaceBundleCmdlet.RootStorage_Capacity"> <summary> <para> <para>The size of the root volume.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.NewWKSWorkspaceBundleCmdlet.UserStorage_Capacity"> <summary> <para> <para>The size of the user volume.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.NewWKSWorkspaceBundleCmdlet.ImageId"> <summary> <para> <para>The identifier of the image that is used to create the bundle.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.NewWKSWorkspaceBundleCmdlet.ComputeType_Name"> <summary> <para> <para>The compute type.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.NewWKSWorkspaceBundleCmdlet.Tag"> <summary> <para> <para>The tags associated with the bundle.</para><note><para>To add tags at the same time when you're creating the bundle, you must create an IAM policy that grants your IAM user permissions to use <code>workspaces:CreateTags</code>. </para></note> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.NewWKSWorkspaceBundleCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'WorkspaceBundle'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.WorkSpaces.Model.CreateWorkspaceBundleResponse). Specifying the name of a property of type Amazon.WorkSpaces.Model.CreateWorkspaceBundleResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.NewWKSWorkspaceBundleCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the BundleName parameter. The -PassThru parameter is deprecated, use -Select '^BundleName' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.NewWKSWorkspaceBundleCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.WKS.RegisterWKSConnectionAliasCmdlet"> <summary> Associates the specified connection alias with the specified directory to enable cross-Region redirection. For more information, see <a href="https://docs.aws.amazon.com/workspaces/latest/adminguide/cross-region-redirection.html"> Cross-Region Redirection for Amazon WorkSpaces</a>. <note><para> Before performing this operation, call <a href="https://docs.aws.amazon.com/workspaces/latest/api/API_DescribeConnectionAliases.html"> DescribeConnectionAliases</a> to make sure that the current state of the connection alias is <code>CREATED</code>. </para></note> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.RegisterWKSConnectionAliasCmdlet.AliasId"> <summary> <para> <para>The identifier of the connection alias.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.RegisterWKSConnectionAliasCmdlet.ResourceId"> <summary> <para> <para>The identifier of the directory to associate the connection alias with.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.RegisterWKSConnectionAliasCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'ConnectionIdentifier'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.WorkSpaces.Model.AssociateConnectionAliasResponse). Specifying the name of a property of type Amazon.WorkSpaces.Model.AssociateConnectionAliasResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.RegisterWKSConnectionAliasCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the AliasId parameter. The -PassThru parameter is deprecated, use -Select '^AliasId' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.RegisterWKSConnectionAliasCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.WKS.RegisterWKSIpGroupCmdlet"> <summary> Associates the specified IP access control group with the specified directory. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.RegisterWKSIpGroupCmdlet.DirectoryId"> <summary> <para> <para>The identifier of the directory.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.RegisterWKSIpGroupCmdlet.GroupId"> <summary> <para> <para>The identifiers of one or more IP access control groups.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.RegisterWKSIpGroupCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.WorkSpaces.Model.AssociateIpGroupsResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.RegisterWKSIpGroupCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the GroupId parameter. The -PassThru parameter is deprecated, use -Select '^GroupId' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.RegisterWKSIpGroupCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.WKS.RegisterWKSWorkspaceDirectoryCmdlet"> <summary> Registers the specified directory. This operation is asynchronous and returns before the WorkSpace directory is registered. If this is the first time you are registering a directory, you will need to create the workspaces_DefaultRole role before you can register a directory. For more information, see <a href="https://docs.aws.amazon.com/workspaces/latest/adminguide/workspaces-access-control.html#create-default-role"> Creating the workspaces_DefaultRole Role</a>. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.RegisterWKSWorkspaceDirectoryCmdlet.DirectoryId"> <summary> <para> <para>The identifier of the directory. You cannot register a directory if it does not have a status of Active. If the directory does not have a status of Active, you will receive an InvalidResourceStateException error. If you have already registered the maximum number of directories that you can register with Amazon WorkSpaces, you will receive a ResourceLimitExceededException error. Deregister directories that you are not using for WorkSpaces, and try again.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.RegisterWKSWorkspaceDirectoryCmdlet.EnableSelfService"> <summary> <para> <para>Indicates whether self-service capabilities are enabled or disabled.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.RegisterWKSWorkspaceDirectoryCmdlet.EnableWorkDoc"> <summary> <para> <para>Indicates whether Amazon WorkDocs is enabled or disabled. If you have enabled this parameter and WorkDocs is not available in the Region, you will receive an OperationNotSupportedException error. Set <code>EnableWorkDocs</code> to disabled, and try again.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.RegisterWKSWorkspaceDirectoryCmdlet.SubnetId"> <summary> <para> <para>The identifiers of the subnets for your virtual private cloud (VPC). Make sure that the subnets are in supported Availability Zones. The subnets must also be in separate Availability Zones. If these conditions are not met, you will receive an OperationNotSupportedException error.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.RegisterWKSWorkspaceDirectoryCmdlet.Tag"> <summary> <para> <para>The tags associated with the directory.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.RegisterWKSWorkspaceDirectoryCmdlet.Tenancy"> <summary> <para> <para>Indicates whether your WorkSpace directory is dedicated or shared. To use Bring Your Own License (BYOL) images, this value must be set to <code>DEDICATED</code> and your Amazon Web Services account must be enabled for BYOL. If your account has not been enabled for BYOL, you will receive an InvalidParameterValuesException error. For more information about BYOL images, see <a href="https://docs.aws.amazon.com/workspaces/latest/adminguide/byol-windows-images.html">Bring Your Own Windows Desktop Images</a>.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.RegisterWKSWorkspaceDirectoryCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.WorkSpaces.Model.RegisterWorkspaceDirectoryResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.RegisterWKSWorkspaceDirectoryCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the DirectoryId parameter. The -PassThru parameter is deprecated, use -Select '^DirectoryId' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.RegisterWKSWorkspaceDirectoryCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.WKS.RemoveWKSConnectClientAddInCmdlet"> <summary> Deletes a client-add-in for Amazon Connect that is configured within a directory. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.RemoveWKSConnectClientAddInCmdlet.AddInId"> <summary> <para> <para>The identifier of the client add-in to delete.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.RemoveWKSConnectClientAddInCmdlet.ResourceId"> <summary> <para> <para>The directory identifier for which the client add-in is configured.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.RemoveWKSConnectClientAddInCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.WorkSpaces.Model.DeleteConnectClientAddInResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.RemoveWKSConnectClientAddInCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the ResourceId parameter. The -PassThru parameter is deprecated, use -Select '^ResourceId' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.RemoveWKSConnectClientAddInCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.WKS.RemoveWKSConnectionAliasCmdlet"> <summary> Deletes the specified connection alias. For more information, see <a href="https://docs.aws.amazon.com/workspaces/latest/adminguide/cross-region-redirection.html"> Cross-Region Redirection for Amazon WorkSpaces</a>. <important><para><b>If you will no longer be using a fully qualified domain name (FQDN) as the registration code for your WorkSpaces users, you must take certain precautions to prevent potential security issues.</b> For more information, see <a href="https://docs.aws.amazon.com/workspaces/latest/adminguide/cross-region-redirection.html#cross-region-redirection-security-considerations"> Security Considerations if You Stop Using Cross-Region Redirection</a>. </para></important><note><para> To delete a connection alias that has been shared, the shared account must first disassociate the connection alias from any directories it has been associated with. Then you must unshare the connection alias from the account it has been shared with. You can delete a connection alias only after it is no longer shared with any accounts or associated with any directories. </para></note> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.RemoveWKSConnectionAliasCmdlet.AliasId"> <summary> <para> <para>The identifier of the connection alias to delete.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.RemoveWKSConnectionAliasCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.WorkSpaces.Model.DeleteConnectionAliasResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.RemoveWKSConnectionAliasCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the AliasId parameter. The -PassThru parameter is deprecated, use -Select '^AliasId' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.RemoveWKSConnectionAliasCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.WKS.RemoveWKSIpGroupCmdlet"> <summary> Deletes the specified IP access control group. <para> You cannot delete an IP access control group that is associated with a directory. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.RemoveWKSIpGroupCmdlet.GroupId"> <summary> <para> <para>The identifier of the IP access control group.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.RemoveWKSIpGroupCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.WorkSpaces.Model.DeleteIpGroupResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.RemoveWKSIpGroupCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the GroupId parameter. The -PassThru parameter is deprecated, use -Select '^GroupId' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.RemoveWKSIpGroupCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.WKS.RemoveWKSTagCmdlet"> <summary> Deletes the specified tags from the specified WorkSpaces resource. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.RemoveWKSTagCmdlet.ResourceId"> <summary> <para> <para>The identifier of the WorkSpaces resource. The supported resource types are WorkSpaces, registered directories, images, custom bundles, IP access control groups, and connection aliases.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.RemoveWKSTagCmdlet.TagKey"> <summary> <para> <para>The tag keys.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.RemoveWKSTagCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.WorkSpaces.Model.DeleteTagsResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.RemoveWKSTagCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.WKS.RemoveWKSWorkspaceBundleCmdlet"> <summary> Deletes the specified WorkSpace bundle. For more information about deleting WorkSpace bundles, see <a href="https://docs.aws.amazon.com/workspaces/latest/adminguide/delete_bundle.html"> Delete a Custom WorkSpaces Bundle or Image</a>. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.RemoveWKSWorkspaceBundleCmdlet.BundleId"> <summary> <para> <para>The identifier of the bundle.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.RemoveWKSWorkspaceBundleCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.WorkSpaces.Model.DeleteWorkspaceBundleResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.RemoveWKSWorkspaceBundleCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the BundleId parameter. The -PassThru parameter is deprecated, use -Select '^BundleId' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.RemoveWKSWorkspaceBundleCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.WKS.RemoveWKSWorkspaceImageCmdlet"> <summary> Deletes the specified image from your account. To delete an image, you must first delete any bundles that are associated with the image and unshare the image if it is shared with other accounts. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.RemoveWKSWorkspaceImageCmdlet.ImageId"> <summary> <para> <para>The identifier of the image.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.RemoveWKSWorkspaceImageCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.WorkSpaces.Model.DeleteWorkspaceImageResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.RemoveWKSWorkspaceImageCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the ImageId parameter. The -PassThru parameter is deprecated, use -Select '^ImageId' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.RemoveWKSWorkspaceImageCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.WKS.RestoreWKSWorkspaceCmdlet"> <summary> Restores the specified WorkSpace to its last known healthy state. <para> You cannot restore a WorkSpace unless its state is <code> AVAILABLE</code>, <code>ERROR</code>, <code>UNHEALTHY</code>, or <code>STOPPED</code>. </para><para> Restoring a WorkSpace is a potentially destructive action that can result in the loss of data. For more information, see <a href="https://docs.aws.amazon.com/workspaces/latest/adminguide/restore-workspace.html">Restore a WorkSpace</a>. </para><para> This operation is asynchronous and returns before the WorkSpace is completely restored. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.RestoreWKSWorkspaceCmdlet.WorkspaceId"> <summary> <para> <para>The identifier of the WorkSpace.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.RestoreWKSWorkspaceCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.WorkSpaces.Model.RestoreWorkspaceResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.RestoreWKSWorkspaceCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the WorkspaceId parameter. The -PassThru parameter is deprecated, use -Select '^WorkspaceId' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.RestoreWKSWorkspaceCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.WKS.RevokeWKSIpRuleCmdlet"> <summary> Removes one or more rules from the specified IP access control group. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.RevokeWKSIpRuleCmdlet.GroupId"> <summary> <para> <para>The identifier of the group.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.RevokeWKSIpRuleCmdlet.UserRule"> <summary> <para> <para>The rules to remove from the group.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.RevokeWKSIpRuleCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.WorkSpaces.Model.RevokeIpRulesResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.RevokeWKSIpRuleCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the GroupId parameter. The -PassThru parameter is deprecated, use -Select '^GroupId' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.RevokeWKSIpRuleCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.WKS.StartWKSWorkspaceMigrationCmdlet"> <summary> Migrates a WorkSpace from one operating system or bundle type to another, while retaining the data on the user volume. <para> The migration process recreates the WorkSpace by using a new root volume from the target bundle image and the user volume from the last available snapshot of the original WorkSpace. During migration, the original <code>D:\Users\%USERNAME%</code> user profile folder is renamed to <code>D:\Users\%USERNAME%MMddyyTHHmmss%.NotMigrated</code>. A new <code>D:\Users\%USERNAME%\</code> folder is generated by the new OS. Certain files in the old user profile are moved to the new user profile. </para><para> For available migration scenarios, details about what happens during migration, and best practices, see <a href="https://docs.aws.amazon.com/workspaces/latest/adminguide/migrate-workspaces.html">Migrate a WorkSpace</a>. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.StartWKSWorkspaceMigrationCmdlet.BundleId"> <summary> <para> <para>The identifier of the target bundle type to migrate the WorkSpace to.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.StartWKSWorkspaceMigrationCmdlet.SourceWorkspaceId"> <summary> <para> <para>The identifier of the WorkSpace to migrate from.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.StartWKSWorkspaceMigrationCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is '*'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.WorkSpaces.Model.MigrateWorkspaceResponse). Specifying the name of a property of type Amazon.WorkSpaces.Model.MigrateWorkspaceResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.StartWKSWorkspaceMigrationCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the SourceWorkspaceId parameter. The -PassThru parameter is deprecated, use -Select '^SourceWorkspaceId' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.StartWKSWorkspaceMigrationCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.WKS.UnregisterWKSConnectionAliasCmdlet"> <summary> Disassociates a connection alias from a directory. Disassociating a connection alias disables cross-Region redirection between two directories in different Regions. For more information, see <a href="https://docs.aws.amazon.com/workspaces/latest/adminguide/cross-region-redirection.html"> Cross-Region Redirection for Amazon WorkSpaces</a>. <note><para> Before performing this operation, call <a href="https://docs.aws.amazon.com/workspaces/latest/api/API_DescribeConnectionAliases.html"> DescribeConnectionAliases</a> to make sure that the current state of the connection alias is <code>CREATED</code>. </para></note> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.UnregisterWKSConnectionAliasCmdlet.AliasId"> <summary> <para> <para>The identifier of the connection alias to disassociate.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.UnregisterWKSConnectionAliasCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.WorkSpaces.Model.DisassociateConnectionAliasResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.UnregisterWKSConnectionAliasCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the AliasId parameter. The -PassThru parameter is deprecated, use -Select '^AliasId' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.UnregisterWKSConnectionAliasCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.WKS.UnregisterWKSIpGroupCmdlet"> <summary> Disassociates the specified IP access control group from the specified directory. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.UnregisterWKSIpGroupCmdlet.DirectoryId"> <summary> <para> <para>The identifier of the directory.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.UnregisterWKSIpGroupCmdlet.GroupId"> <summary> <para> <para>The identifiers of one or more IP access control groups.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.UnregisterWKSIpGroupCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.WorkSpaces.Model.DisassociateIpGroupsResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.UnregisterWKSIpGroupCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the GroupId parameter. The -PassThru parameter is deprecated, use -Select '^GroupId' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.UnregisterWKSIpGroupCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.WKS.UnregisterWKSWorkspaceDirectoryCmdlet"> <summary> Deregisters the specified directory. This operation is asynchronous and returns before the WorkSpace directory is deregistered. If any WorkSpaces are registered to this directory, you must remove them before you can deregister the directory. <note><para> Simple AD and AD Connector are made available to you free of charge to use with WorkSpaces. If there are no WorkSpaces being used with your Simple AD or AD Connector directory for 30 consecutive days, this directory will be automatically deregistered for use with Amazon WorkSpaces, and you will be charged for this directory as per the <a href="http://aws.amazon.com/directoryservice/pricing/">Directory Service pricing terms</a>. </para><para> To delete empty directories, see <a href="https://docs.aws.amazon.com/workspaces/latest/adminguide/delete-workspaces-directory.html"> Delete the Directory for Your WorkSpaces</a>. If you delete your Simple AD or AD Connector directory, you can always create a new one when you want to start using WorkSpaces again. </para></note> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.UnregisterWKSWorkspaceDirectoryCmdlet.DirectoryId"> <summary> <para> <para>The identifier of the directory. If any WorkSpaces are registered to this directory, you must remove them before you deregister the directory, or you will receive an OperationNotSupportedException error.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.UnregisterWKSWorkspaceDirectoryCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.WorkSpaces.Model.DeregisterWorkspaceDirectoryResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.UnregisterWKSWorkspaceDirectoryCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the DirectoryId parameter. The -PassThru parameter is deprecated, use -Select '^DirectoryId' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.UnregisterWKSWorkspaceDirectoryCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.WKS.UpdateWKSConnectClientAddInCmdlet"> <summary> Updates a Amazon Connect client add-in. Use this action to update the name and endpoint URL of a Amazon Connect client add-in. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.UpdateWKSConnectClientAddInCmdlet.AddInId"> <summary> <para> <para>The identifier of the client add-in to update.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.UpdateWKSConnectClientAddInCmdlet.Name"> <summary> <para> <para>The name of the client add-in.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.UpdateWKSConnectClientAddInCmdlet.ResourceId"> <summary> <para> <para>The directory identifier for which the client add-in is configured.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.UpdateWKSConnectClientAddInCmdlet.URL"> <summary> <para> <para>The endpoint URL of the Amazon Connect client add-in.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.UpdateWKSConnectClientAddInCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.WorkSpaces.Model.UpdateConnectClientAddInResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.UpdateWKSConnectClientAddInCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the ResourceId parameter. The -PassThru parameter is deprecated, use -Select '^ResourceId' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.UpdateWKSConnectClientAddInCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.WKS.UpdateWKSConnectionAliasPermissionCmdlet"> <summary> Shares or unshares a connection alias with one account by specifying whether that account has permission to associate the connection alias with a directory. If the association permission is granted, the connection alias is shared with that account. If the association permission is revoked, the connection alias is unshared with the account. For more information, see <a href="https://docs.aws.amazon.com/workspaces/latest/adminguide/cross-region-redirection.html"> Cross-Region Redirection for Amazon WorkSpaces</a>. <note><ul><li><para> Before performing this operation, call <a href="https://docs.aws.amazon.com/workspaces/latest/api/API_DescribeConnectionAliases.html"> DescribeConnectionAliases</a> to make sure that the current state of the connection alias is <code>CREATED</code>. </para></li><li><para> To delete a connection alias that has been shared, the shared account must first disassociate the connection alias from any directories it has been associated with. Then you must unshare the connection alias from the account it has been shared with. You can delete a connection alias only after it is no longer shared with any accounts or associated with any directories. </para></li></ul></note> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.UpdateWKSConnectionAliasPermissionCmdlet.AliasId"> <summary> <para> <para>The identifier of the connection alias that you want to update permissions for.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.UpdateWKSConnectionAliasPermissionCmdlet.ConnectionAliasPermission_AllowAssociation"> <summary> <para> <para>Indicates whether the specified Amazon Web Services account is allowed to associate the connection alias with a directory.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.UpdateWKSConnectionAliasPermissionCmdlet.ConnectionAliasPermission_SharedAccountId"> <summary> <para> <para>The identifier of the Amazon Web Services account that the connection alias is shared with.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.UpdateWKSConnectionAliasPermissionCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.WorkSpaces.Model.UpdateConnectionAliasPermissionResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.UpdateWKSConnectionAliasPermissionCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the AliasId parameter. The -PassThru parameter is deprecated, use -Select '^AliasId' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.UpdateWKSConnectionAliasPermissionCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.WKS.UpdateWKSRulesOfIpGroupCmdlet"> <summary> Replaces the current rules of the specified IP access control group with the specified rules. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.UpdateWKSRulesOfIpGroupCmdlet.GroupId"> <summary> <para> <para>The identifier of the group.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.UpdateWKSRulesOfIpGroupCmdlet.UserRule"> <summary> <para> <para>One or more rules.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.UpdateWKSRulesOfIpGroupCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.WorkSpaces.Model.UpdateRulesOfIpGroupResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.UpdateWKSRulesOfIpGroupCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the GroupId parameter. The -PassThru parameter is deprecated, use -Select '^GroupId' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.UpdateWKSRulesOfIpGroupCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.WKS.UpdateWKSWorkspaceBundleCmdlet"> <summary> Updates a WorkSpace bundle with a new image. For more information about updating WorkSpace bundles, see <a href="https://docs.aws.amazon.com/workspaces/latest/adminguide/update-custom-bundle.html"> Update a Custom WorkSpaces Bundle</a>. <important><para> Existing WorkSpaces aren't automatically updated when you update the bundle that they're based on. To update existing WorkSpaces that are based on a bundle that you've updated, you must either rebuild the WorkSpaces or delete and recreate them. </para></important> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.UpdateWKSWorkspaceBundleCmdlet.BundleId"> <summary> <para> <para>The identifier of the bundle.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.UpdateWKSWorkspaceBundleCmdlet.ImageId"> <summary> <para> <para>The identifier of the image.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.UpdateWKSWorkspaceBundleCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.WorkSpaces.Model.UpdateWorkspaceBundleResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.UpdateWKSWorkspaceBundleCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the BundleId parameter. The -PassThru parameter is deprecated, use -Select '^BundleId' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.UpdateWKSWorkspaceBundleCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.WKS.UpdateWKSWorkspaceImagePermissionCmdlet"> <summary> Shares or unshares an image with one account in the same Amazon Web Services Region by specifying whether that account has permission to copy the image. If the copy image permission is granted, the image is shared with that account. If the copy image permission is revoked, the image is unshared with the account. <para> After an image has been shared, the recipient account can copy the image to other Regions as needed. </para><para> In the China (Ningxia) Region, you can copy images only within the same Region. </para><para> In Amazon Web Services GovCloud (US), to copy images to and from other Regions, contact Amazon Web Services Support. </para><para> For more information about sharing images, see <a href="https://docs.aws.amazon.com/workspaces/latest/adminguide/share-custom-image.html"> Share or Unshare a Custom WorkSpaces Image</a>. </para><note><ul><li><para> To delete an image that has been shared, you must unshare the image before you delete it. </para></li><li><para> Sharing Bring Your Own License (BYOL) images across Amazon Web Services accounts isn't supported at this time in Amazon Web Services GovCloud (US). To share BYOL images across accounts in Amazon Web Services GovCloud (US), contact Amazon Web Services Support. </para></li></ul></note> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.UpdateWKSWorkspaceImagePermissionCmdlet.AllowCopyImage"> <summary> <para> <para>The permission to copy the image. This permission can be revoked only after an image has been shared.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.UpdateWKSWorkspaceImagePermissionCmdlet.ImageId"> <summary> <para> <para>The identifier of the image.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.UpdateWKSWorkspaceImagePermissionCmdlet.SharedAccountId"> <summary> <para> <para>The identifier of the Amazon Web Services account to share or unshare the image with.</para><important><para>Before sharing the image, confirm that you are sharing to the correct Amazon Web Services account ID.</para></important> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.UpdateWKSWorkspaceImagePermissionCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.WorkSpaces.Model.UpdateWorkspaceImagePermissionResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.UpdateWKSWorkspaceImagePermissionCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the ImageId parameter. The -PassThru parameter is deprecated, use -Select '^ImageId' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.WKS.UpdateWKSWorkspaceImagePermissionCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> </members> </doc> |