AWS.Tools.Synthetics.XML

<?xml version="1.0"?>
<doc>
    <assembly>
        <name>AWS.Tools.Synthetics</name>
    </assembly>
    <members>
        <member name="T:Amazon.PowerShell.Cmdlets.CWSYN.AddCWSYNResourceCmdlet">
            <summary>
            Associates a canary with a group. Using groups can help you with managing and automating
            your canaries, and you can also view aggregated run results and statistics for all
            canaries in a group.
             
              
            <para>
            You must run this operation in the Region where the canary exists.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.AddCWSYNResourceCmdlet.GroupIdentifier">
            <summary>
            <para>
            <para>Specifies the group. You can specify the group name, the ARN, or the group ID as the
            <c>GroupIdentifier</c>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.AddCWSYNResourceCmdlet.ResourceArn">
            <summary>
            <para>
            <para>The ARN of the canary that you want to associate with the specified group.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.AddCWSYNResourceCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Synthetics.Model.AssociateResourceResponse).
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.AddCWSYNResourceCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the GroupIdentifier parameter.
            The -PassThru parameter is deprecated, use -Select '^GroupIdentifier' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.AddCWSYNResourceCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.CWSYN.AddCWSYNResourceTagCmdlet">
            <summary>
            Assigns one or more tags (key-value pairs) to the specified canary or group.
             
              
            <para>
            Tags can help you organize and categorize your resources. You can also use them to
            scope user permissions, by granting a user permission to access or change only resources
            with certain tag values.
            </para><para>
            Tags don't have any semantic meaning to Amazon Web Services and are interpreted strictly
            as strings of characters.
            </para><para>
            You can use the <c>TagResource</c> action with a resource that already has tags. If
            you specify a new tag key for the resource, this tag is appended to the list of tags
            associated with the resource. If you specify a tag key that is already associated
            with the resource, the new tag value that you specify replaces the previous value
            for that tag.
            </para><para>
            You can associate as many as 50 tags with a canary or group.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.AddCWSYNResourceTagCmdlet.ResourceArn">
            <summary>
            <para>
            <para>The ARN of the canary or group that you're adding tags to.</para><para>The ARN format of a canary is <c>arn:aws:synthetics:<i>Region</i>:<i>account-id</i>:canary:<i>canary-name</i></c>.</para><para>The ARN format of a group is <c>arn:aws:synthetics:<i>Region</i>:<i>account-id</i>:group:<i>group-name</i></c></para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.AddCWSYNResourceTagCmdlet.Tag">
            <summary>
            <para>
            <para>The list of key-value pairs to associate with the resource.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.AddCWSYNResourceTagCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Synthetics.Model.TagResourceResponse).
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.AddCWSYNResourceTagCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the ResourceArn parameter.
            The -PassThru parameter is deprecated, use -Select '^ResourceArn' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.AddCWSYNResourceTagCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.CWSYN.GetCWSYNAssociatedGroupListCmdlet">
            <summary>
            Returns a list of the groups that the specified canary is associated with. The canary
            that you specify must be in the current Region.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.GetCWSYNAssociatedGroupListCmdlet.ResourceArn">
            <summary>
            <para>
            <para>The ARN of the canary that you want to view groups for.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.GetCWSYNAssociatedGroupListCmdlet.MaxResult">
            <summary>
            <para>
            <para>Specify this parameter to limit how many groups are returned each time you use the
            <c>ListAssociatedGroups</c> operation. If you omit this parameter, the default of
            20 is used.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.GetCWSYNAssociatedGroupListCmdlet.NextToken">
            <summary>
            <para>
            <para>A token that indicates that there is more data available. You can use this token in
            a subsequent operation to retrieve the next set of results.</para>
            </para>
            <para>
            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.
            <br/>In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.GetCWSYNAssociatedGroupListCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Groups'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Synthetics.Model.ListAssociatedGroupsResponse).
            Specifying the name of a property of type Amazon.Synthetics.Model.ListAssociatedGroupsResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.GetCWSYNAssociatedGroupListCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the ResourceArn parameter.
            The -PassThru parameter is deprecated, use -Select '^ResourceArn' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.GetCWSYNAssociatedGroupListCmdlet.NoAutoIteration">
            <summary>
            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple
            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken
            as the start point.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.CWSYN.GetCWSYNCanariesLastRunCmdlet">
            <summary>
            Use this operation to see information from the most recent run of each canary that
            you have created.
             
              
            <para>
            This operation supports resource-level authorization using an IAM policy and the <c>Names</c>
            parameter. If you specify the <c>Names</c> parameter, the operation is successful
            only if you have authorization to view all the canaries that you specify in your request.
            If you do not have permission to view any of the canaries, the request fails with
            a 403 response.
            </para><para>
            You are required to use the <c>Names</c> parameter if you are logged on to a user
            or role that has an IAM policy that restricts which canaries that you are allowed
            to view. For more information, see <a href="https://docs.aws.amazon.com/AmazonCloudWatch/latest/monitoring/CloudWatch_Synthetics_Canaries_Restricted.html">
            Limiting a user to viewing specific canaries</a>.
            </para><br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.GetCWSYNCanariesLastRunCmdlet.Name">
            <summary>
            <para>
            <para>Use this parameter to return only canaries that match the names that you specify here.
            You can specify as many as five canary names.</para><para>If you specify this parameter, the operation is successful only if you have authorization
            to view all the canaries that you specify in your request. If you do not have permission
            to view any of the canaries, the request fails with a 403 response.</para><para>You are required to use the <c>Names</c> parameter if you are logged on to a user
            or role that has an IAM policy that restricts which canaries that you are allowed
            to view. For more information, see <a href="https://docs.aws.amazon.com/AmazonCloudWatch/latest/monitoring/CloudWatch_Synthetics_Canaries_Restricted.html">
            Limiting a user to viewing specific canaries</a>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.GetCWSYNCanariesLastRunCmdlet.MaxResult">
            <summary>
            <para>
            <para>Specify this parameter to limit how many runs are returned each time you use the <c>DescribeLastRun</c>
            operation. If you omit this parameter, the default of 100 is used.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.GetCWSYNCanariesLastRunCmdlet.NextToken">
            <summary>
            <para>
            <para>A token that indicates that there is more data available. You can use this token in
            a subsequent <c>DescribeCanariesLastRun</c> operation to retrieve the next set of
            results.</para>
            </para>
            <para>
            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.
            <br/>In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.GetCWSYNCanariesLastRunCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'CanariesLastRun'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Synthetics.Model.DescribeCanariesLastRunResponse).
            Specifying the name of a property of type Amazon.Synthetics.Model.DescribeCanariesLastRunResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.GetCWSYNCanariesLastRunCmdlet.NoAutoIteration">
            <summary>
            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple
            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken
            as the start point.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.CWSYN.GetCWSYNCanaryCmdlet">
            <summary>
            Retrieves complete information about one canary. You must specify the name of the
            canary that you want. To get a list of canaries and their names, use <a href="https://docs.aws.amazon.com/AmazonSynthetics/latest/APIReference/API_DescribeCanaries.html">DescribeCanaries</a>.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.GetCWSYNCanaryCmdlet.Name">
            <summary>
            <para>
            <para>The name of the canary that you want details for.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.GetCWSYNCanaryCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Canary'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Synthetics.Model.GetCanaryResponse).
            Specifying the name of a property of type Amazon.Synthetics.Model.GetCanaryResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.GetCWSYNCanaryCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the Name parameter.
            The -PassThru parameter is deprecated, use -Select '^Name' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.CWSYN.GetCWSYNCanaryListCmdlet">
            <summary>
            This operation returns a list of the canaries in your account, along with full details
            about each canary.
             
              
            <para>
            This operation supports resource-level authorization using an IAM policy and the <c>Names</c>
            parameter. If you specify the <c>Names</c> parameter, the operation is successful
            only if you have authorization to view all the canaries that you specify in your request.
            If you do not have permission to view any of the canaries, the request fails with
            a 403 response.
            </para><para>
            You are required to use the <c>Names</c> parameter if you are logged on to a user
            or role that has an IAM policy that restricts which canaries that you are allowed
            to view. For more information, see <a href="https://docs.aws.amazon.com/AmazonCloudWatch/latest/monitoring/CloudWatch_Synthetics_Canaries_Restricted.html">
            Limiting a user to viewing specific canaries</a>.
            </para><br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.GetCWSYNCanaryListCmdlet.Name">
            <summary>
            <para>
            <para>Use this parameter to return only canaries that match the names that you specify here.
            You can specify as many as five canary names.</para><para>If you specify this parameter, the operation is successful only if you have authorization
            to view all the canaries that you specify in your request. If you do not have permission
            to view any of the canaries, the request fails with a 403 response.</para><para>You are required to use this parameter if you are logged on to a user or role that
            has an IAM policy that restricts which canaries that you are allowed to view. For
            more information, see <a href="https://docs.aws.amazon.com/AmazonCloudWatch/latest/monitoring/CloudWatch_Synthetics_Canaries_Restricted.html">
            Limiting a user to viewing specific canaries</a>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.GetCWSYNCanaryListCmdlet.MaxResult">
            <summary>
            <para>
            <para>Specify this parameter to limit how many canaries are returned each time you use the
            <c>DescribeCanaries</c> operation. If you omit this parameter, the default of 20 is
            used.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.GetCWSYNCanaryListCmdlet.NextToken">
            <summary>
            <para>
            <para>A token that indicates that there is more data available. You can use this token in
            a subsequent operation to retrieve the next set of results.</para>
            </para>
            <para>
            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.
            <br/>In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.GetCWSYNCanaryListCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Canaries'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Synthetics.Model.DescribeCanariesResponse).
            Specifying the name of a property of type Amazon.Synthetics.Model.DescribeCanariesResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.GetCWSYNCanaryListCmdlet.NoAutoIteration">
            <summary>
            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple
            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken
            as the start point.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.CWSYN.GetCWSYNCanaryRunCmdlet">
            <summary>
            Retrieves a list of runs for a specified canary.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.GetCWSYNCanaryRunCmdlet.Name">
            <summary>
            <para>
            <para>The name of the canary that you want to see runs for.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.GetCWSYNCanaryRunCmdlet.MaxResult">
            <summary>
            <para>
            <para>Specify this parameter to limit how many runs are returned each time you use the <c>GetCanaryRuns</c>
            operation. If you omit this parameter, the default of 100 is used.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.GetCWSYNCanaryRunCmdlet.NextToken">
            <summary>
            <para>
            <para>A token that indicates that there is more data available. You can use this token in
            a subsequent <c>GetCanaryRuns</c> operation to retrieve the next set of results.</para>
            </para>
            <para>
            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.
            <br/>In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.GetCWSYNCanaryRunCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'CanaryRuns'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Synthetics.Model.GetCanaryRunsResponse).
            Specifying the name of a property of type Amazon.Synthetics.Model.GetCanaryRunsResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.GetCWSYNCanaryRunCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the Name parameter.
            The -PassThru parameter is deprecated, use -Select '^Name' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.GetCWSYNCanaryRunCmdlet.NoAutoIteration">
            <summary>
            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple
            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken
            as the start point.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.CWSYN.GetCWSYNGroupCmdlet">
            <summary>
            Returns information about one group. Groups are a global resource, so you can use
            this operation from any Region.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.GetCWSYNGroupCmdlet.GroupIdentifier">
            <summary>
            <para>
            <para>Specifies the group to return information for. You can specify the group name, the
            ARN, or the group ID as the <c>GroupIdentifier</c>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.GetCWSYNGroupCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Group'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Synthetics.Model.GetGroupResponse).
            Specifying the name of a property of type Amazon.Synthetics.Model.GetGroupResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.GetCWSYNGroupCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the GroupIdentifier parameter.
            The -PassThru parameter is deprecated, use -Select '^GroupIdentifier' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.CWSYN.GetCWSYNGroupListCmdlet">
            <summary>
            Returns a list of all groups in the account, displaying their names, unique IDs, and
            ARNs. The groups from all Regions are returned.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.GetCWSYNGroupListCmdlet.MaxResult">
            <summary>
            <para>
            <para>Specify this parameter to limit how many groups are returned each time you use the
            <c>ListGroups</c> operation. If you omit this parameter, the default of 20 is used.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.GetCWSYNGroupListCmdlet.NextToken">
            <summary>
            <para>
            <para>A token that indicates that there is more data available. You can use this token in
            a subsequent operation to retrieve the next set of results.</para>
            </para>
            <para>
            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.
            <br/>In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.GetCWSYNGroupListCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Groups'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Synthetics.Model.ListGroupsResponse).
            Specifying the name of a property of type Amazon.Synthetics.Model.ListGroupsResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.GetCWSYNGroupListCmdlet.NoAutoIteration">
            <summary>
            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple
            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken
            as the start point.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.CWSYN.GetCWSYNGroupResourceListCmdlet">
            <summary>
            This operation returns a list of the ARNs of the canaries that are associated with
            the specified group.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.GetCWSYNGroupResourceListCmdlet.GroupIdentifier">
            <summary>
            <para>
            <para>Specifies the group to return information for. You can specify the group name, the
            ARN, or the group ID as the <c>GroupIdentifier</c>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.GetCWSYNGroupResourceListCmdlet.MaxResult">
            <summary>
            <para>
            <para>Specify this parameter to limit how many canary ARNs are returned each time you use
            the <c>ListGroupResources</c> operation. If you omit this parameter, the default of
            20 is used.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.GetCWSYNGroupResourceListCmdlet.NextToken">
            <summary>
            <para>
            <para>A token that indicates that there is more data available. You can use this token in
            a subsequent operation to retrieve the next set of results.</para>
            </para>
            <para>
            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.
            <br/>In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.GetCWSYNGroupResourceListCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Resources'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Synthetics.Model.ListGroupResourcesResponse).
            Specifying the name of a property of type Amazon.Synthetics.Model.ListGroupResourcesResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.GetCWSYNGroupResourceListCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the GroupIdentifier parameter.
            The -PassThru parameter is deprecated, use -Select '^GroupIdentifier' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.GetCWSYNGroupResourceListCmdlet.NoAutoIteration">
            <summary>
            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple
            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken
            as the start point.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.CWSYN.GetCWSYNResourceTagCmdlet">
            <summary>
            Displays the tags associated with a canary or group.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.GetCWSYNResourceTagCmdlet.ResourceArn">
            <summary>
            <para>
            <para>The ARN of the canary or group that you want to view tags for.</para><para>The ARN format of a canary is <c>arn:aws:synthetics:<i>Region</i>:<i>account-id</i>:canary:<i>canary-name</i></c>.</para><para>The ARN format of a group is <c>arn:aws:synthetics:<i>Region</i>:<i>account-id</i>:group:<i>group-name</i></c></para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.GetCWSYNResourceTagCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Tags'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Synthetics.Model.ListTagsForResourceResponse).
            Specifying the name of a property of type Amazon.Synthetics.Model.ListTagsForResourceResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.GetCWSYNResourceTagCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the ResourceArn parameter.
            The -PassThru parameter is deprecated, use -Select '^ResourceArn' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.CWSYN.GetCWSYNRuntimeVersionCmdlet">
            <summary>
            Returns a list of Synthetics canary runtime versions. For more information, see <a href="https://docs.aws.amazon.com/AmazonCloudWatch/latest/monitoring/CloudWatch_Synthetics_Canaries_Library.html">
            Canary Runtime Versions</a>.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.GetCWSYNRuntimeVersionCmdlet.MaxResult">
            <summary>
            <para>
            <para>Specify this parameter to limit how many runs are returned each time you use the <c>DescribeRuntimeVersions</c>
            operation. If you omit this parameter, the default of 100 is used.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.GetCWSYNRuntimeVersionCmdlet.NextToken">
            <summary>
            <para>
            <para>A token that indicates that there is more data available. You can use this token in
            a subsequent <c>DescribeRuntimeVersions</c> operation to retrieve the next set of
            results.</para>
            </para>
            <para>
            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.
            <br/>In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.GetCWSYNRuntimeVersionCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'RuntimeVersions'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Synthetics.Model.DescribeRuntimeVersionsResponse).
            Specifying the name of a property of type Amazon.Synthetics.Model.DescribeRuntimeVersionsResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.GetCWSYNRuntimeVersionCmdlet.NoAutoIteration">
            <summary>
            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple
            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken
            as the start point.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.CWSYN.NewCWSYNCanaryCmdlet">
            <summary>
            Creates a canary. Canaries are scripts that monitor your endpoints and APIs from the
            outside-in. Canaries help you check the availability and latency of your web services
            and troubleshoot anomalies by investigating load time data, screenshots of the UI,
            logs, and metrics. You can set up a canary to run continuously or just once.
             
              
            <para>
            Do not use <c>CreateCanary</c> to modify an existing canary. Use <a href="https://docs.aws.amazon.com/AmazonSynthetics/latest/APIReference/API_UpdateCanary.html">UpdateCanary</a>
            instead.
            </para><para>
            To create canaries, you must have the <c>CloudWatchSyntheticsFullAccess</c> policy.
            If you are creating a new IAM role for the canary, you also need the <c>iam:CreateRole</c>,
            <c>iam:CreatePolicy</c> and <c>iam:AttachRolePolicy</c> permissions. For more information,
            see <a href="https://docs.aws.amazon.com/AmazonCloudWatch/latest/monitoring/CloudWatch_Synthetics_Canaries_Roles">Necessary
            Roles and Permissions</a>.
            </para><para>
            Do not include secrets or proprietary information in your canary names. The canary
            name makes up part of the Amazon Resource Name (ARN) for the canary, and the ARN is
            included in outbound calls over the internet. For more information, see <a href="https://docs.aws.amazon.com/AmazonCloudWatch/latest/monitoring/servicelens_canaries_security.html">Security
            Considerations for Synthetics Canaries</a>.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.NewCWSYNCanaryCmdlet.RunConfig_ActiveTracing">
            <summary>
            <para>
            <para>Specifies whether this canary is to use active X-Ray tracing when it runs. Active
            tracing enables this canary run to be displayed in the ServiceLens and X-Ray service
            maps even if the canary does not hit an endpoint that has X-Ray tracing enabled. Using
            X-Ray tracing incurs charges. For more information, see <a href="https://docs.aws.amazon.com/AmazonCloudWatch/latest/monitoring/CloudWatch_Synthetics_Canaries_tracing.html">
            Canaries and X-Ray tracing</a>.</para><para>You can enable active tracing only for canaries that use version <c>syn-nodejs-2.0</c>
            or later for their canary runtime.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.NewCWSYNCanaryCmdlet.ArtifactS3Location">
            <summary>
            <para>
            <para>The location in Amazon S3 where Synthetics stores artifacts from the test runs of
            this canary. Artifacts include the log file, screenshots, and HAR files. The name
            of the S3 bucket can't include a period (.).</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.NewCWSYNCanaryCmdlet.Schedule_DurationInSecond">
            <summary>
            <para>
            <para>How long, in seconds, for the canary to continue making regular runs according to
            the schedule in the <c>Expression</c> value. If you specify 0, the canary continues
            making runs until you stop it. If you omit this field, the default of 0 is used.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.NewCWSYNCanaryCmdlet.S3Encryption_EncryptionMode">
            <summary>
            <para>
            <para> The encryption method to use for artifacts created by this canary. Specify <c>SSE_S3</c>
            to use server-side encryption (SSE) with an Amazon S3-managed key. Specify <c>SSE-KMS</c>
            to use server-side encryption with a customer-managed KMS key.</para><para>If you omit this parameter, an Amazon Web Services-managed KMS key is used. </para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.NewCWSYNCanaryCmdlet.RunConfig_EnvironmentVariable">
            <summary>
            <para>
            <para>Specifies the keys and values to use for any environment variables used in the canary
            script. Use the following format:</para><para>{ "key1" : "value1", "key2" : "value2", ...}</para><para>Keys must start with a letter and be at least two characters. The total size of your
            environment variables cannot exceed 4 KB. You can't specify any Lambda reserved environment
            variables as the keys for your environment variables. For more information about reserved
            keys, see <a href="https://docs.aws.amazon.com/lambda/latest/dg/configuration-envvars.html#configuration-envvars-runtime">
            Runtime environment variables</a>.</para><important><para>The environment variables keys and values are not encrypted. Do not store sensitive
            information in this field.</para></important>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.NewCWSYNCanaryCmdlet.ExecutionRoleArn">
            <summary>
            <para>
            <para>The ARN of the IAM role to be used to run the canary. This role must already exist,
            and must include <c>lambda.amazonaws.com</c> as a principal in the trust policy. The
            role must also have the following permissions:</para><ul><li><para><c>s3:PutObject</c></para></li><li><para><c>s3:GetBucketLocation</c></para></li><li><para><c>s3:ListAllMyBuckets</c></para></li><li><para><c>cloudwatch:PutMetricData</c></para></li><li><para><c>logs:CreateLogGroup</c></para></li><li><para><c>logs:CreateLogStream</c></para></li><li><para><c>logs:PutLogEvents</c></para></li></ul>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.NewCWSYNCanaryCmdlet.Schedule_Expression">
            <summary>
            <para>
            <para>A <c>rate</c> expression or a <c>cron</c> expression that defines how often the canary
            is to run.</para><para>For a rate expression, The syntax is <c>rate(<i>number unit</i>)</c>. <i>unit</i>
            can be <c>minute</c>, <c>minutes</c>, or <c>hour</c>. </para><para>For example, <c>rate(1 minute)</c> runs the canary once a minute, <c>rate(10 minutes)</c>
            runs it once every 10 minutes, and <c>rate(1 hour)</c> runs it once every hour. You
            can specify a frequency between <c>rate(1 minute)</c> and <c>rate(1 hour)</c>.</para><para>Specifying <c>rate(0 minute)</c> or <c>rate(0 hour)</c> is a special value that causes
            the canary to run only once when it is started.</para><para>Use <c>cron(<i>expression</i>)</c> to specify a cron expression. You can't schedule
            a canary to wait for more than a year before running. For information about the syntax
            for cron expressions, see <a href="https://docs.aws.amazon.com/AmazonCloudWatch/latest/monitoring/CloudWatch_Synthetics_Canaries_cron.html">
            Scheduling canary runs using cron</a>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.NewCWSYNCanaryCmdlet.FailureRetentionPeriodInDay">
            <summary>
            <para>
            <para>The number of days to retain data about failed runs of this canary. If you omit this
            field, the default of 31 days is used. The valid range is 1 to 455 days.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.NewCWSYNCanaryCmdlet.Code_Handler">
            <summary>
            <para>
            <para>The entry point to use for the source code when running the canary. For canaries that
            use the <c>syn-python-selenium-1.0</c> runtime or a <c>syn-nodejs.puppeteer</c> runtime
            earlier than <c>syn-nodejs.puppeteer-3.4</c>, the handler must be specified as <c><i>fileName</i>.handler</c>. For <c>syn-python-selenium-1.1</c>, <c>syn-nodejs.puppeteer-3.4</c>,
            and later runtimes, the handler can be specified as <c><i>fileName</i>.<i>functionName</i></c>, or you can specify a folder where canary scripts reside as <c><i>folder</i>/<i>fileName</i>.<i>functionName</i></c>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.NewCWSYNCanaryCmdlet.S3Encryption_KmsKeyArn">
            <summary>
            <para>
            <para>The ARN of the customer-managed KMS key to use, if you specify <c>SSE-KMS</c> for
            <c>EncryptionMode</c></para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.NewCWSYNCanaryCmdlet.RunConfig_MemoryInMB">
            <summary>
            <para>
            <para>The maximum amount of memory available to the canary while it is running, in MB. This
            value must be a multiple of 64.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.NewCWSYNCanaryCmdlet.Name">
            <summary>
            <para>
            <para>The name for this canary. Be sure to give it a descriptive name that distinguishes
            it from other canaries in your account.</para><para>Do not include secrets or proprietary information in your canary names. The canary
            name makes up part of the canary ARN, and the ARN is included in outbound calls over
            the internet. For more information, see <a href="https://docs.aws.amazon.com/AmazonCloudWatch/latest/monitoring/servicelens_canaries_security.html">Security
            Considerations for Synthetics Canaries</a>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.NewCWSYNCanaryCmdlet.ResourcesToReplicateTag">
            <summary>
            <para>
            <para>To have the tags that you apply to this canary also be applied to the Lambda function
            that the canary uses, specify this parameter with the value <c>lambda-function</c>.</para><para>If you specify this parameter and don't specify any tags in the <c>Tags</c> parameter,
            the canary creation fails.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.NewCWSYNCanaryCmdlet.RuntimeVersion">
            <summary>
            <para>
            <para>Specifies the runtime version to use for the canary. For a list of valid runtime versions
            and more information about runtime versions, see <a href="https://docs.aws.amazon.com/AmazonCloudWatch/latest/monitoring/CloudWatch_Synthetics_Canaries_Library.html">
            Canary Runtime Versions</a>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.NewCWSYNCanaryCmdlet.Code_S3Bucket">
            <summary>
            <para>
            <para>If your canary script is located in S3, specify the bucket name here. Do not include
            <c>s3://</c> as the start of the bucket name.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.NewCWSYNCanaryCmdlet.Code_S3Key">
            <summary>
            <para>
            <para>The S3 key of your script. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/dev/UsingObjects.html">Working
            with Amazon S3 Objects</a>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.NewCWSYNCanaryCmdlet.Code_S3Version">
            <summary>
            <para>
            <para>The S3 version ID of your script.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.NewCWSYNCanaryCmdlet.VpcConfig_SecurityGroupId">
            <summary>
            <para>
            <para>The IDs of the security groups for this canary.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.NewCWSYNCanaryCmdlet.VpcConfig_SubnetId">
            <summary>
            <para>
            <para>The IDs of the subnets where this canary is to run.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.NewCWSYNCanaryCmdlet.SuccessRetentionPeriodInDay">
            <summary>
            <para>
            <para>The number of days to retain data about successful runs of this canary. If you omit
            this field, the default of 31 days is used. The valid range is 1 to 455 days.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.NewCWSYNCanaryCmdlet.Tag">
            <summary>
            <para>
            <para>A list of key-value pairs to associate with the canary. You can associate as many
            as 50 tags with a canary.</para><para>Tags can help you organize and categorize your resources. You can also use them to
            scope user permissions, by granting a user permission to access or change only the
            resources that have certain tag values.</para><para>To have the tags that you apply to this canary also be applied to the Lambda function
            that the canary uses, specify this parameter with the value <c>lambda-function</c>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.NewCWSYNCanaryCmdlet.RunConfig_TimeoutInSecond">
            <summary>
            <para>
            <para>How long the canary is allowed to run before it must stop. You can't set this time
            to be longer than the frequency of the runs of this canary.</para><para>If you omit this field, the frequency of the canary is used as this value, up to a
            maximum of 14 minutes.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.NewCWSYNCanaryCmdlet.Code_ZipFile">
            <summary>
            <para>
            <para>If you input your canary script directly into the canary instead of referring to an
            S3 location, the value of this parameter is the base64-encoded contents of the .zip
            file that contains the script. It must be smaller than 225 Kb.</para><para>For large canary scripts, we recommend that you use an S3 location instead of inputting
            it directly with this parameter.</para>
            </para>
            <para>The cmdlet will automatically convert the supplied parameter of type string, string[], System.IO.FileInfo or System.IO.Stream to byte[] before supplying it to the service.</para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.NewCWSYNCanaryCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Canary'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Synthetics.Model.CreateCanaryResponse).
            Specifying the name of a property of type Amazon.Synthetics.Model.CreateCanaryResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.NewCWSYNCanaryCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the Name parameter.
            The -PassThru parameter is deprecated, use -Select '^Name' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.NewCWSYNCanaryCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.CWSYN.NewCWSYNGroupCmdlet">
            <summary>
            Creates a group which you can use to associate canaries with each other, including
            cross-Region canaries. Using groups can help you with managing and automating your
            canaries, and you can also view aggregated run results and statistics for all canaries
            in a group.
             
              
            <para>
            Groups are global resources. When you create a group, it is replicated across Amazon
            Web Services Regions, and you can view it and add canaries to it from any Region.
            Although the group ARN format reflects the Region name where it was created, a group
            is not constrained to any Region. This means that you can put canaries from multiple
            Regions into the same group, and then use that group to view and manage all of those
            canaries in a single view.
            </para><para>
            Groups are supported in all Regions except the Regions that are disabled by default.
            For more information about these Regions, see <a href="https://docs.aws.amazon.com/general/latest/gr/rande-manage.html#rande-manage-enable">Enabling
            a Region</a>.
            </para><para>
            Each group can contain as many as 10 canaries. You can have as many as 20 groups in
            your account. Any single canary can be a member of up to 10 groups.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.NewCWSYNGroupCmdlet.Name">
            <summary>
            <para>
            <para>The name for the group. It can include any Unicode characters.</para><para>The names for all groups in your account, across all Regions, must be unique.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.NewCWSYNGroupCmdlet.Tag">
            <summary>
            <para>
            <para>A list of key-value pairs to associate with the group. You can associate as many as
            50 tags with a group.</para><para>Tags can help you organize and categorize your resources. You can also use them to
            scope user permissions, by granting a user permission to access or change only the
            resources that have certain tag values.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.NewCWSYNGroupCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Group'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Synthetics.Model.CreateGroupResponse).
            Specifying the name of a property of type Amazon.Synthetics.Model.CreateGroupResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.NewCWSYNGroupCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the Name parameter.
            The -PassThru parameter is deprecated, use -Select '^Name' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.NewCWSYNGroupCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.CWSYN.RemoveCWSYNCanaryCmdlet">
            <summary>
            Permanently deletes the specified canary.
             
              
            <para>
            If you specify <c>DeleteLambda</c> to <c>true</c>, CloudWatch Synthetics also deletes
            the Lambda functions and layers that are used by the canary.
            </para><para>
            Other resources used and created by the canary are not automatically deleted. After
            you delete a canary that you do not intend to use again, you should also delete the
            following:
            </para><ul><li><para>
            The CloudWatch alarms created for this canary. These alarms have a name of <c>Synthetics-Alarm-<i>first-198-characters-of-canary-name</i>-<i>canaryId</i>-<i>alarm
            number</i></c></para></li><li><para>
            Amazon S3 objects and buckets, such as the canary's artifact location.
            </para></li><li><para>
            IAM roles created for the canary. If they were created in the console, these roles
            have the name <c> role/service-role/CloudWatchSyntheticsRole-<i>First-21-Characters-of-CanaryName</i></c></para></li><li><para>
            CloudWatch Logs log groups created for the canary. These logs groups have the name
            <c>/aws/lambda/cwsyn-<i>First-21-Characters-of-CanaryName</i></c></para></li></ul><para>
            Before you delete a canary, you might want to use <c>GetCanary</c> to display the
            information about this canary. Make note of the information returned by this operation
            so that you can delete these resources after you delete the canary.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.RemoveCWSYNCanaryCmdlet.DeleteLambda">
            <summary>
            <para>
            <para>Specifies whether to also delete the Lambda functions and layers used by this canary.
            The default is false.</para><para>Type: Boolean</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.RemoveCWSYNCanaryCmdlet.Name">
            <summary>
            <para>
            <para>The name of the canary that you want to delete. To find the names of your canaries,
            use <a href="https://docs.aws.amazon.com/AmazonSynthetics/latest/APIReference/API_DescribeCanaries.html">DescribeCanaries</a>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.RemoveCWSYNCanaryCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Synthetics.Model.DeleteCanaryResponse).
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.RemoveCWSYNCanaryCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the Name parameter.
            The -PassThru parameter is deprecated, use -Select '^Name' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.RemoveCWSYNCanaryCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.CWSYN.RemoveCWSYNGroupCmdlet">
            <summary>
            Deletes a group. The group doesn't need to be empty to be deleted. If there are canaries
            in the group, they are not deleted when you delete the group.
             
              
            <para>
            Groups are a global resource that appear in all Regions, but the request to delete
            a group must be made from its home Region. You can find the home Region of a group
            within its ARN.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.RemoveCWSYNGroupCmdlet.GroupIdentifier">
            <summary>
            <para>
            <para>Specifies which group to delete. You can specify the group name, the ARN, or the group
            ID as the <c>GroupIdentifier</c>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.RemoveCWSYNGroupCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Synthetics.Model.DeleteGroupResponse).
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.RemoveCWSYNGroupCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the GroupIdentifier parameter.
            The -PassThru parameter is deprecated, use -Select '^GroupIdentifier' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.RemoveCWSYNGroupCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.CWSYN.RemoveCWSYNResourceCmdlet">
            <summary>
            Removes a canary from a group. You must run this operation in the Region where the
            canary exists.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.RemoveCWSYNResourceCmdlet.GroupIdentifier">
            <summary>
            <para>
            <para>Specifies the group. You can specify the group name, the ARN, or the group ID as the
            <c>GroupIdentifier</c>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.RemoveCWSYNResourceCmdlet.ResourceArn">
            <summary>
            <para>
            <para>The ARN of the canary that you want to remove from the specified group.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.RemoveCWSYNResourceCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Synthetics.Model.DisassociateResourceResponse).
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.RemoveCWSYNResourceCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the GroupIdentifier parameter.
            The -PassThru parameter is deprecated, use -Select '^GroupIdentifier' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.RemoveCWSYNResourceCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.CWSYN.RemoveCWSYNResourceTagCmdlet">
            <summary>
            Removes one or more tags from the specified resource.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.RemoveCWSYNResourceTagCmdlet.ResourceArn">
            <summary>
            <para>
            <para>The ARN of the canary or group that you're removing tags from.</para><para>The ARN format of a canary is <c>arn:aws:synthetics:<i>Region</i>:<i>account-id</i>:canary:<i>canary-name</i></c>.</para><para>The ARN format of a group is <c>arn:aws:synthetics:<i>Region</i>:<i>account-id</i>:group:<i>group-name</i></c></para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.RemoveCWSYNResourceTagCmdlet.TagKey">
            <summary>
            <para>
            <para>The list of tag keys to remove from the resource.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.RemoveCWSYNResourceTagCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Synthetics.Model.UntagResourceResponse).
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.RemoveCWSYNResourceTagCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the ResourceArn parameter.
            The -PassThru parameter is deprecated, use -Select '^ResourceArn' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.RemoveCWSYNResourceTagCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.CWSYN.StartCWSYNCanaryCmdlet">
            <summary>
            Use this operation to run a canary that has already been created. The frequency of
            the canary runs is determined by the value of the canary's <c>Schedule</c>. To see
            a canary's schedule, use <a href="https://docs.aws.amazon.com/AmazonSynthetics/latest/APIReference/API_GetCanary.html">GetCanary</a>.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.StartCWSYNCanaryCmdlet.Name">
            <summary>
            <para>
            <para>The name of the canary that you want to run. To find canary names, use <a href="https://docs.aws.amazon.com/AmazonSynthetics/latest/APIReference/API_DescribeCanaries.html">DescribeCanaries</a>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.StartCWSYNCanaryCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Synthetics.Model.StartCanaryResponse).
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.StartCWSYNCanaryCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the Name parameter.
            The -PassThru parameter is deprecated, use -Select '^Name' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.StartCWSYNCanaryCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.CWSYN.StopCWSYNCanaryCmdlet">
            <summary>
            Stops the canary to prevent all future runs. If the canary is currently running,the
            run that is in progress completes on its own, publishes metrics, and uploads artifacts,
            but it is not recorded in Synthetics as a completed run.
             
              
            <para>
            You can use <c>StartCanary</c> to start it running again with the canary’s current
            schedule at any point in the future.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.StopCWSYNCanaryCmdlet.Name">
            <summary>
            <para>
            <para>The name of the canary that you want to stop. To find the names of your canaries,
            use <a href="https://docs.aws.amazon.com/AmazonSynthetics/latest/APIReference/API_DescribeCanaries.html">ListCanaries</a>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.StopCWSYNCanaryCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Synthetics.Model.StopCanaryResponse).
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.StopCWSYNCanaryCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the Name parameter.
            The -PassThru parameter is deprecated, use -Select '^Name' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.StopCWSYNCanaryCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.CWSYN.UpdateCWSYNCanaryCmdlet">
            <summary>
            Updates the configuration of a canary that has already been created.
             
              
            <para>
            You can't use this operation to update the tags of an existing canary. To change the
            tags of an existing canary, use <a href="https://docs.aws.amazon.com/AmazonSynthetics/latest/APIReference/API_TagResource.html">TagResource</a>.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.UpdateCWSYNCanaryCmdlet.RunConfig_ActiveTracing">
            <summary>
            <para>
            <para>Specifies whether this canary is to use active X-Ray tracing when it runs. Active
            tracing enables this canary run to be displayed in the ServiceLens and X-Ray service
            maps even if the canary does not hit an endpoint that has X-Ray tracing enabled. Using
            X-Ray tracing incurs charges. For more information, see <a href="https://docs.aws.amazon.com/AmazonCloudWatch/latest/monitoring/CloudWatch_Synthetics_Canaries_tracing.html">
            Canaries and X-Ray tracing</a>.</para><para>You can enable active tracing only for canaries that use version <c>syn-nodejs-2.0</c>
            or later for their canary runtime.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.UpdateCWSYNCanaryCmdlet.ArtifactS3Location">
            <summary>
            <para>
            <para>The location in Amazon S3 where Synthetics stores artifacts from the test runs of
            this canary. Artifacts include the log file, screenshots, and HAR files. The name
            of the S3 bucket can't include a period (.).</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.UpdateCWSYNCanaryCmdlet.VisualReference_BaseCanaryRunId">
            <summary>
            <para>
            <para>Specifies which canary run to use the screenshots from as the baseline for future
            visual monitoring with this canary. Valid values are <c>nextrun</c> to use the screenshots
            from the next run after this update is made, <c>lastrun</c> to use the screenshots
            from the most recent run before this update was made, or the value of <c>Id</c> in
            the <a href="https://docs.aws.amazon.com/AmazonSynthetics/latest/APIReference/API_CanaryRun.html">
            CanaryRun</a> from any past run of this canary.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.UpdateCWSYNCanaryCmdlet.VisualReference_BaseScreenshot">
            <summary>
            <para>
            <para>An array of screenshots that will be used as the baseline for visual monitoring in
            future runs of this canary. If there is a screenshot that you don't want to be used
            for visual monitoring, remove it from this array.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.UpdateCWSYNCanaryCmdlet.Schedule_DurationInSecond">
            <summary>
            <para>
            <para>How long, in seconds, for the canary to continue making regular runs according to
            the schedule in the <c>Expression</c> value. If you specify 0, the canary continues
            making runs until you stop it. If you omit this field, the default of 0 is used.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.UpdateCWSYNCanaryCmdlet.S3Encryption_EncryptionMode">
            <summary>
            <para>
            <para> The encryption method to use for artifacts created by this canary. Specify <c>SSE_S3</c>
            to use server-side encryption (SSE) with an Amazon S3-managed key. Specify <c>SSE-KMS</c>
            to use server-side encryption with a customer-managed KMS key.</para><para>If you omit this parameter, an Amazon Web Services-managed KMS key is used. </para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.UpdateCWSYNCanaryCmdlet.RunConfig_EnvironmentVariable">
            <summary>
            <para>
            <para>Specifies the keys and values to use for any environment variables used in the canary
            script. Use the following format:</para><para>{ "key1" : "value1", "key2" : "value2", ...}</para><para>Keys must start with a letter and be at least two characters. The total size of your
            environment variables cannot exceed 4 KB. You can't specify any Lambda reserved environment
            variables as the keys for your environment variables. For more information about reserved
            keys, see <a href="https://docs.aws.amazon.com/lambda/latest/dg/configuration-envvars.html#configuration-envvars-runtime">
            Runtime environment variables</a>.</para><important><para>The environment variables keys and values are not encrypted. Do not store sensitive
            information in this field.</para></important>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.UpdateCWSYNCanaryCmdlet.ExecutionRoleArn">
            <summary>
            <para>
            <para>The ARN of the IAM role to be used to run the canary. This role must already exist,
            and must include <c>lambda.amazonaws.com</c> as a principal in the trust policy. The
            role must also have the following permissions:</para><ul><li><para><c>s3:PutObject</c></para></li><li><para><c>s3:GetBucketLocation</c></para></li><li><para><c>s3:ListAllMyBuckets</c></para></li><li><para><c>cloudwatch:PutMetricData</c></para></li><li><para><c>logs:CreateLogGroup</c></para></li><li><para><c>logs:CreateLogStream</c></para></li><li><para><c>logs:CreateLogStream</c></para></li></ul>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.UpdateCWSYNCanaryCmdlet.Schedule_Expression">
            <summary>
            <para>
            <para>A <c>rate</c> expression or a <c>cron</c> expression that defines how often the canary
            is to run.</para><para>For a rate expression, The syntax is <c>rate(<i>number unit</i>)</c>. <i>unit</i>
            can be <c>minute</c>, <c>minutes</c>, or <c>hour</c>. </para><para>For example, <c>rate(1 minute)</c> runs the canary once a minute, <c>rate(10 minutes)</c>
            runs it once every 10 minutes, and <c>rate(1 hour)</c> runs it once every hour. You
            can specify a frequency between <c>rate(1 minute)</c> and <c>rate(1 hour)</c>.</para><para>Specifying <c>rate(0 minute)</c> or <c>rate(0 hour)</c> is a special value that causes
            the canary to run only once when it is started.</para><para>Use <c>cron(<i>expression</i>)</c> to specify a cron expression. You can't schedule
            a canary to wait for more than a year before running. For information about the syntax
            for cron expressions, see <a href="https://docs.aws.amazon.com/AmazonCloudWatch/latest/monitoring/CloudWatch_Synthetics_Canaries_cron.html">
            Scheduling canary runs using cron</a>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.UpdateCWSYNCanaryCmdlet.FailureRetentionPeriodInDay">
            <summary>
            <para>
            <para>The number of days to retain data about failed runs of this canary.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.UpdateCWSYNCanaryCmdlet.Code_Handler">
            <summary>
            <para>
            <para>The entry point to use for the source code when running the canary. For canaries that
            use the <c>syn-python-selenium-1.0</c> runtime or a <c>syn-nodejs.puppeteer</c> runtime
            earlier than <c>syn-nodejs.puppeteer-3.4</c>, the handler must be specified as <c><i>fileName</i>.handler</c>. For <c>syn-python-selenium-1.1</c>, <c>syn-nodejs.puppeteer-3.4</c>,
            and later runtimes, the handler can be specified as <c><i>fileName</i>.<i>functionName</i></c>, or you can specify a folder where canary scripts reside as <c><i>folder</i>/<i>fileName</i>.<i>functionName</i></c>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.UpdateCWSYNCanaryCmdlet.S3Encryption_KmsKeyArn">
            <summary>
            <para>
            <para>The ARN of the customer-managed KMS key to use, if you specify <c>SSE-KMS</c> for
            <c>EncryptionMode</c></para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.UpdateCWSYNCanaryCmdlet.RunConfig_MemoryInMB">
            <summary>
            <para>
            <para>The maximum amount of memory available to the canary while it is running, in MB. This
            value must be a multiple of 64.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.UpdateCWSYNCanaryCmdlet.Name">
            <summary>
            <para>
            <para>The name of the canary that you want to update. To find the names of your canaries,
            use <a href="https://docs.aws.amazon.com/AmazonSynthetics/latest/APIReference/API_DescribeCanaries.html">DescribeCanaries</a>.</para><para>You cannot change the name of a canary that has already been created.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.UpdateCWSYNCanaryCmdlet.RuntimeVersion">
            <summary>
            <para>
            <para>Specifies the runtime version to use for the canary. For a list of valid runtime versions
            and for more information about runtime versions, see <a href="https://docs.aws.amazon.com/AmazonCloudWatch/latest/monitoring/CloudWatch_Synthetics_Canaries_Library.html">
            Canary Runtime Versions</a>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.UpdateCWSYNCanaryCmdlet.Code_S3Bucket">
            <summary>
            <para>
            <para>If your canary script is located in S3, specify the bucket name here. Do not include
            <c>s3://</c> as the start of the bucket name.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.UpdateCWSYNCanaryCmdlet.Code_S3Key">
            <summary>
            <para>
            <para>The S3 key of your script. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/dev/UsingObjects.html">Working
            with Amazon S3 Objects</a>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.UpdateCWSYNCanaryCmdlet.Code_S3Version">
            <summary>
            <para>
            <para>The S3 version ID of your script.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.UpdateCWSYNCanaryCmdlet.VpcConfig_SecurityGroupId">
            <summary>
            <para>
            <para>The IDs of the security groups for this canary.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.UpdateCWSYNCanaryCmdlet.VpcConfig_SubnetId">
            <summary>
            <para>
            <para>The IDs of the subnets where this canary is to run.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.UpdateCWSYNCanaryCmdlet.SuccessRetentionPeriodInDay">
            <summary>
            <para>
            <para>The number of days to retain data about successful runs of this canary.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.UpdateCWSYNCanaryCmdlet.RunConfig_TimeoutInSecond">
            <summary>
            <para>
            <para>How long the canary is allowed to run before it must stop. You can't set this time
            to be longer than the frequency of the runs of this canary.</para><para>If you omit this field, the frequency of the canary is used as this value, up to a
            maximum of 14 minutes.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.UpdateCWSYNCanaryCmdlet.Code_ZipFile">
            <summary>
            <para>
            <para>If you input your canary script directly into the canary instead of referring to an
            S3 location, the value of this parameter is the base64-encoded contents of the .zip
            file that contains the script. It must be smaller than 225 Kb.</para><para>For large canary scripts, we recommend that you use an S3 location instead of inputting
            it directly with this parameter.</para>
            </para>
            <para>The cmdlet will automatically convert the supplied parameter of type string, string[], System.IO.FileInfo or System.IO.Stream to byte[] before supplying it to the service.</para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.UpdateCWSYNCanaryCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Synthetics.Model.UpdateCanaryResponse).
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.UpdateCWSYNCanaryCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the Name parameter.
            The -PassThru parameter is deprecated, use -Select '^Name' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.CWSYN.UpdateCWSYNCanaryCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
    </members>
</doc>