AWS.Tools.ResourceGroups.XML
|
<?xml version="1.0"?>
<doc> <assembly> <name>AWS.Tools.ResourceGroups</name> </assembly> <members> <member name="T:Amazon.PowerShell.Cmdlets.RG.AddRGResourceCmdlet"> <summary> Adds the specified resources to the specified group. <important><para> You can use this operation with only resource groups that are configured with the following types: </para><ul><li><para><c>AWS::EC2::HostManagement</c></para></li><li><para><c>AWS::EC2::CapacityReservationPool</c></para></li></ul><para> Other resource group type and resource types aren't currently supported by this operation. </para></important><para><b>Minimum permissions</b></para><para> To run this command, you must have the following permissions: </para><ul><li><para><c>resource-groups:GroupResources</c></para></li></ul> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.RG.AddRGResourceCmdlet.Group"> <summary> <para> <para>The name or the ARN of the resource group to add resources to.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.RG.AddRGResourceCmdlet.ResourceArn"> <summary> <para> <para>The list of ARNs of the resources to be added to the group. </para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.RG.AddRGResourceCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is '*'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ResourceGroups.Model.GroupResourcesResponse). Specifying the name of a property of type Amazon.ResourceGroups.Model.GroupResourcesResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.RG.AddRGResourceCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the Group parameter. The -PassThru parameter is deprecated, use -Select '^Group' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.RG.AddRGResourceCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.RG.AddRGResourceTagCmdlet"> <summary> Adds tags to a resource group with the specified ARN. Existing tags on a resource group are not changed if they are not specified in the request parameters. <important><para> Do not store personally identifiable information (PII) or other confidential or sensitive information in tags. We use tags to provide you with billing and administration services. Tags are not intended to be used for private or sensitive data. </para></important><para><b>Minimum permissions</b></para><para> To run this command, you must have the following permissions: </para><ul><li><para><c>resource-groups:Tag</c></para></li></ul> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.RG.AddRGResourceTagCmdlet.Arn"> <summary> <para> <para>The ARN of the resource group to which to add tags.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.RG.AddRGResourceTagCmdlet.Tag"> <summary> <para> <para>The tags to add to the specified resource group. A tag is a string-to-string map of key-value pairs.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.RG.AddRGResourceTagCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is '*'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ResourceGroups.Model.TagResponse). Specifying the name of a property of type Amazon.ResourceGroups.Model.TagResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.RG.AddRGResourceTagCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the Tag parameter. The -PassThru parameter is deprecated, use -Select '^Tag' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.RG.AddRGResourceTagCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.RG.FindRGResourceCmdlet"> <summary> Returns a list of Amazon Web Services resource identifiers that matches the specified query. The query uses the same format as a resource query in a <a>CreateGroup</a> or <a>UpdateGroupQuery</a> operation. <para><b>Minimum permissions</b></para><para> To run this command, you must have the following permissions: </para><ul><li><para><c>resource-groups:SearchResources</c></para></li><li><para><c>cloudformation:DescribeStacks</c></para></li><li><para><c>cloudformation:ListStackResources</c></para></li><li><para><c>tag:GetResources</c></para></li></ul><br/><br/>In the AWS.Tools.ResourceGroups module, this cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.RG.FindRGResourceCmdlet.ResourceQuery"> <summary> <para> <para>The search query, using the same formats that are supported for resource group definition. For more information, see <a>CreateGroup</a>.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.RG.FindRGResourceCmdlet.MaxResult"> <summary> <para> <para>The total number of results that you want included on each page of the response. If you do not include this parameter, it defaults to a value that is specific to the operation. If additional items exist beyond the maximum you specify, the <c>NextToken</c> response element is present and has a value (is not null). Include that value as the <c>NextToken</c> request parameter in the next call to the operation to get the next part of the results. Note that the service might return fewer results than the maximum even when there are more results available. You should check <c>NextToken</c> after every operation to ensure that you receive all of the results.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.RG.FindRGResourceCmdlet.NextToken"> <summary> <para> <para>The parameter for receiving additional results if you receive a <c>NextToken</c> response in a previous request. A <c>NextToken</c> response indicates that more output is available. Set this parameter to the value provided by a previous call's <c>NextToken</c> response to indicate where the output should continue from.</para> </para> <para> <br/><b>Note:</b> In the AWS.Tools.ResourceGroups module, this parameter is only used if you are manually controlling output pagination of the service API call. <br/>In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.RG.FindRGResourceCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is '*'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ResourceGroups.Model.SearchResourcesResponse). Specifying the name of a property of type Amazon.ResourceGroups.Model.SearchResourcesResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.RG.FindRGResourceCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the ResourceQuery parameter. The -PassThru parameter is deprecated, use -Select '^ResourceQuery' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.RG.FindRGResourceCmdlet.NoAutoIteration"> <summary> By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken as the start point. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.RG.GetRGAccountSettingCmdlet"> <summary> Retrieves the current status of optional features in Resource Groups. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.RG.GetRGAccountSettingCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'AccountSettings'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ResourceGroups.Model.GetAccountSettingsResponse). Specifying the name of a property of type Amazon.ResourceGroups.Model.GetAccountSettingsResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.RG.GetRGGroupCmdlet"> <summary> Returns information about a specified resource group. <para><b>Minimum permissions</b></para><para> To run this command, you must have the following permissions: </para><ul><li><para><c>resource-groups:GetGroup</c></para></li></ul> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.RG.GetRGGroupCmdlet.Group"> <summary> <para> <para>The name or the ARN of the resource group to retrieve.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.RG.GetRGGroupCmdlet.GroupName"> <summary> <para> <para>Deprecated - don't use this parameter. Use <c>Group</c> instead.</para> </para> <para>This parameter is deprecated.</para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.RG.GetRGGroupCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'Group'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ResourceGroups.Model.GetGroupResponse). Specifying the name of a property of type Amazon.ResourceGroups.Model.GetGroupResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.RG.GetRGGroupCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the GroupName parameter. The -PassThru parameter is deprecated, use -Select '^GroupName' instead. This parameter will be removed in a future version. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.RG.GetRGGroupConfigurationCmdlet"> <summary> Retrieves the service configuration associated with the specified resource group. For details about the service configuration syntax, see <a href="https://docs.aws.amazon.com/ARG/latest/APIReference/about-slg.html">Service configurations for Resource Groups</a>. <para><b>Minimum permissions</b></para><para> To run this command, you must have the following permissions: </para><ul><li><para><c>resource-groups:GetGroupConfiguration</c></para></li></ul> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.RG.GetRGGroupConfigurationCmdlet.Group"> <summary> <para> <para>The name or the ARN of the resource group for which you want to retrive the service configuration.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.RG.GetRGGroupConfigurationCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is '*'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ResourceGroups.Model.GetGroupConfigurationResponse). Specifying the name of a property of type Amazon.ResourceGroups.Model.GetGroupConfigurationResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.RG.GetRGGroupConfigurationCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the Group parameter. The -PassThru parameter is deprecated, use -Select '^Group' instead. This parameter will be removed in a future version. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.RG.GetRGGroupListCmdlet"> <summary> Returns a list of existing Resource Groups in your account. <para><b>Minimum permissions</b></para><para> To run this command, you must have the following permissions: </para><ul><li><para><c>resource-groups:ListGroups</c></para></li></ul><br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.RG.GetRGGroupListCmdlet.Filter"> <summary> <para> <para>Filters, formatted as <a>GroupFilter</a> objects, that you want to apply to a <c>ListGroups</c> operation.</para><ul><li><para><c>resource-type</c> - Filter the results to include only those resource groups that have the specified resource type in their <c>ResourceTypeFilter</c>. For example, <c>AWS::EC2::Instance</c> would return any resource group with a <c>ResourceTypeFilter</c> that includes <c>AWS::EC2::Instance</c>.</para></li><li><para><c>configuration-type</c> - Filter the results to include only those groups that have the specified configuration types attached. The current supported values are:</para><ul><li><para><c>AWS::AppRegistry::Application</c></para></li><li><para><c>AWS::AppRegistry::ApplicationResourceGroups</c></para></li><li><para><c>AWS::CloudFormation::Stack</c></para></li><li><para><c>AWS::EC2::CapacityReservationPool</c></para></li><li><para><c>AWS::EC2::HostManagement</c></para></li><li><para><c>AWS::NetworkFirewall::RuleGroup</c></para></li></ul></li></ul> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.RG.GetRGGroupListCmdlet.MaxResult"> <summary> <para> <para>The total number of results that you want included on each page of the response. If you do not include this parameter, it defaults to a value that is specific to the operation. If additional items exist beyond the maximum you specify, the <c>NextToken</c> response element is present and has a value (is not null). Include that value as the <c>NextToken</c> request parameter in the next call to the operation to get the next part of the results. Note that the service might return fewer results than the maximum even when there are more results available. You should check <c>NextToken</c> after every operation to ensure that you receive all of the results.</para> </para> <para> <br/><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet. <br/>In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call. <br/>Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned. </para> <para>If a value for this parameter is not specified the cmdlet will use a default value of '<b>50</b>'.</para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.RG.GetRGGroupListCmdlet.NextToken"> <summary> <para> <para>The parameter for receiving additional results if you receive a <c>NextToken</c> response in a previous request. A <c>NextToken</c> response indicates that more output is available. Set this parameter to the value provided by a previous call's <c>NextToken</c> response to indicate where the output should continue from.</para> </para> <para> <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call. <br/>In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.RG.GetRGGroupListCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'GroupIdentifiers'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ResourceGroups.Model.ListGroupsResponse). Specifying the name of a property of type Amazon.ResourceGroups.Model.ListGroupsResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.RG.GetRGGroupListCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the Filter parameter. The -PassThru parameter is deprecated, use -Select '^Filter' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.RG.GetRGGroupListCmdlet.NoAutoIteration"> <summary> By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken as the start point. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.RG.GetRGGroupQueryCmdlet"> <summary> Retrieves the resource query associated with the specified resource group. For more information about resource queries, see <a href="https://docs.aws.amazon.com/ARG/latest/userguide/gettingstarted-query.html#gettingstarted-query-cli-tag">Create a tag-based group in Resource Groups</a>. <para><b>Minimum permissions</b></para><para> To run this command, you must have the following permissions: </para><ul><li><para><c>resource-groups:GetGroupQuery</c></para></li></ul> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.RG.GetRGGroupQueryCmdlet.Group"> <summary> <para> <para>The name or the ARN of the resource group to query.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.RG.GetRGGroupQueryCmdlet.GroupName"> <summary> <para> <para>Don't use this parameter. Use <c>Group</c> instead.</para> </para> <para>This parameter is deprecated.</para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.RG.GetRGGroupQueryCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'GroupQuery'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ResourceGroups.Model.GetGroupQueryResponse). Specifying the name of a property of type Amazon.ResourceGroups.Model.GetGroupQueryResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.RG.GetRGGroupQueryCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the GroupName parameter. The -PassThru parameter is deprecated, use -Select '^GroupName' instead. This parameter will be removed in a future version. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.RG.GetRGGroupResourceListCmdlet"> <summary> Returns a list of ARNs of the resources that are members of a specified resource group. <para><b>Minimum permissions</b></para><para> To run this command, you must have the following permissions: </para><ul><li><para><c>resource-groups:ListGroupResources</c></para></li><li><para><c>cloudformation:DescribeStacks</c></para></li><li><para><c>cloudformation:ListStackResources</c></para></li><li><para><c>tag:GetResources</c></para></li></ul><br/><br/>In the AWS.Tools.ResourceGroups module, this cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.RG.GetRGGroupResourceListCmdlet.Filter"> <summary> <para> <para>Filters, formatted as <a>ResourceFilter</a> objects, that you want to apply to a <c>ListGroupResources</c> operation. Filters the results to include only those of the specified resource types.</para><ul><li><para><c>resource-type</c> - Filter resources by their type. Specify up to five resource types in the format <c>AWS::ServiceCode::ResourceType</c>. For example, <c>AWS::EC2::Instance</c>, or <c>AWS::S3::Bucket</c>. </para></li></ul><para>When you specify a <c>resource-type</c> filter for <c>ListGroupResources</c>, Resource Groups validates your filter resource types against the types that are defined in the query associated with the group. For example, if a group contains only S3 buckets because its query specifies only that resource type, but your <c>resource-type</c> filter includes EC2 instances, AWS Resource Groups does not filter for EC2 instances. In this case, a <c>ListGroupResources</c> request returns a <c>BadRequestException</c> error with a message similar to the following:</para><para><c>The resource types specified as filters in the request are not valid.</c></para><para>The error includes a list of resource types that failed the validation because they are not part of the query associated with the group. This validation doesn't occur when the group query specifies <c>AWS::AllSupported</c>, because a group based on such a query can contain any of the allowed resource types for the query type (tag-based or Amazon CloudFront stack-based queries).</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.RG.GetRGGroupResourceListCmdlet.Group"> <summary> <para> <para>The name or the ARN of the resource group</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.RG.GetRGGroupResourceListCmdlet.GroupName"> <summary> <para> <important><para><i><b>Deprecated - don't use this parameter. Use the <c>Group</c> request field instead.</b></i></para></important> </para> <para>This parameter is deprecated.</para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.RG.GetRGGroupResourceListCmdlet.MaxResult"> <summary> <para> <para>The total number of results that you want included on each page of the response. If you do not include this parameter, it defaults to a value that is specific to the operation. If additional items exist beyond the maximum you specify, the <c>NextToken</c> response element is present and has a value (is not null). Include that value as the <c>NextToken</c> request parameter in the next call to the operation to get the next part of the results. Note that the service might return fewer results than the maximum even when there are more results available. You should check <c>NextToken</c> after every operation to ensure that you receive all of the results.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.RG.GetRGGroupResourceListCmdlet.NextToken"> <summary> <para> <para>The parameter for receiving additional results if you receive a <c>NextToken</c> response in a previous request. A <c>NextToken</c> response indicates that more output is available. Set this parameter to the value provided by a previous call's <c>NextToken</c> response to indicate where the output should continue from.</para> </para> <para> <br/><b>Note:</b> In the AWS.Tools.ResourceGroups module, this parameter is only used if you are manually controlling output pagination of the service API call. <br/>In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.RG.GetRGGroupResourceListCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is '*'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ResourceGroups.Model.ListGroupResourcesResponse). Specifying the name of a property of type Amazon.ResourceGroups.Model.ListGroupResourcesResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.RG.GetRGGroupResourceListCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the GroupName parameter. The -PassThru parameter is deprecated, use -Select '^GroupName' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.RG.GetRGGroupResourceListCmdlet.NoAutoIteration"> <summary> By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken as the start point. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.RG.GetRGResourceTagCmdlet"> <summary> Returns a list of tags that are associated with a resource group, specified by an ARN. <para><b>Minimum permissions</b></para><para> To run this command, you must have the following permissions: </para><ul><li><para><c>resource-groups:GetTags</c></para></li></ul> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.RG.GetRGResourceTagCmdlet.Arn"> <summary> <para> <para>The ARN of the resource group whose tags you want to retrieve.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.RG.GetRGResourceTagCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'Tags'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ResourceGroups.Model.GetTagsResponse). Specifying the name of a property of type Amazon.ResourceGroups.Model.GetTagsResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.RG.GetRGResourceTagCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the Arn parameter. The -PassThru parameter is deprecated, use -Select '^Arn' instead. This parameter will be removed in a future version. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.RG.NewRGGroupCmdlet"> <summary> Creates a resource group with the specified name and description. You can optionally include either a resource query or a service configuration. For more information about constructing a resource query, see <a href="https://docs.aws.amazon.com/ARG/latest/userguide/getting_started-query.html">Build queries and groups in Resource Groups</a> in the <i>Resource Groups User Guide</i>. For more information about service-linked groups and service configurations, see <a href="https://docs.aws.amazon.com/ARG/latest/APIReference/about-slg.html">Service configurations for Resource Groups</a>. <para><b>Minimum permissions</b></para><para> To run this command, you must have the following permissions: </para><ul><li><para><c>resource-groups:CreateGroup</c></para></li></ul> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.RG.NewRGGroupCmdlet.Configuration"> <summary> <para> <para>A configuration associates the resource group with an Amazon Web Services service and specifies how the service can interact with the resources in the group. A configuration is an array of <a>GroupConfigurationItem</a> elements. For details about the syntax of service configurations, see <a href="https://docs.aws.amazon.com/ARG/latest/APIReference/about-slg.html">Service configurations for Resource Groups</a>.</para><note><para>A resource group can contain either a <c>Configuration</c> or a <c>ResourceQuery</c>, but not both.</para></note> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.RG.NewRGGroupCmdlet.Description"> <summary> <para> <para>The description of the resource group. Descriptions can consist of letters, numbers, hyphens, underscores, periods, and spaces.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.RG.NewRGGroupCmdlet.Name"> <summary> <para> <para>The name of the group, which is the identifier of the group in other operations. You can't change the name of a resource group after you create it. A resource group name can consist of letters, numbers, hyphens, periods, and underscores. The name cannot start with <c>AWS</c>, <c>aws</c>, or any other possible capitalization; these are reserved. A resource group name must be unique within each Amazon Web Services Region in your Amazon Web Services account.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.RG.NewRGGroupCmdlet.ResourceQuery"> <summary> <para> <para>The resource query that determines which Amazon Web Services resources are members of this group. For more information about resource queries, see <a href="https://docs.aws.amazon.com/ARG/latest/userguide/gettingstarted-query.html#gettingstarted-query-cli-tag">Create a tag-based group in Resource Groups</a>. </para><note><para>A resource group can contain either a <c>ResourceQuery</c> or a <c>Configuration</c>, but not both.</para></note> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.RG.NewRGGroupCmdlet.Tag"> <summary> <para> <para>The tags to add to the group. A tag is key-value pair string.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.RG.NewRGGroupCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is '*'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ResourceGroups.Model.CreateGroupResponse). Specifying the name of a property of type Amazon.ResourceGroups.Model.CreateGroupResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.RG.NewRGGroupCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the ResourceQuery parameter. The -PassThru parameter is deprecated, use -Select '^ResourceQuery' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.RG.NewRGGroupCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.RG.RemoveRGGroupCmdlet"> <summary> Deletes the specified resource group. Deleting a resource group does not delete any resources that are members of the group; it only deletes the group structure. <para><b>Minimum permissions</b></para><para> To run this command, you must have the following permissions: </para><ul><li><para><c>resource-groups:DeleteGroup</c></para></li></ul> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.RG.RemoveRGGroupCmdlet.Group"> <summary> <para> <para>The name or the ARN of the resource group to delete.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.RG.RemoveRGGroupCmdlet.GroupName"> <summary> <para> <para>Deprecated - don't use this parameter. Use <c>Group</c> instead.</para> </para> <para>This parameter is deprecated.</para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.RG.RemoveRGGroupCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'Group'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ResourceGroups.Model.DeleteGroupResponse). Specifying the name of a property of type Amazon.ResourceGroups.Model.DeleteGroupResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.RG.RemoveRGGroupCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the GroupName parameter. The -PassThru parameter is deprecated, use -Select '^GroupName' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.RG.RemoveRGGroupCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.RG.RemoveRGResourceCmdlet"> <summary> Removes the specified resources from the specified group. This operation works only with static groups that you populated using the <a>GroupResources</a> operation. It doesn't work with any resource groups that are automatically populated by tag-based or CloudFormation stack-based queries. <para><b>Minimum permissions</b></para><para> To run this command, you must have the following permissions: </para><ul><li><para><c>resource-groups:UngroupResources</c></para></li></ul> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.RG.RemoveRGResourceCmdlet.Group"> <summary> <para> <para>The name or the ARN of the resource group from which to remove the resources.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.RG.RemoveRGResourceCmdlet.ResourceArn"> <summary> <para> <para>The ARNs of the resources to be removed from the group.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.RG.RemoveRGResourceCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is '*'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ResourceGroups.Model.UngroupResourcesResponse). Specifying the name of a property of type Amazon.ResourceGroups.Model.UngroupResourcesResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.RG.RemoveRGResourceCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the Group parameter. The -PassThru parameter is deprecated, use -Select '^Group' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.RG.RemoveRGResourceCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.RG.RemoveRGResourceTagCmdlet"> <summary> Deletes tags from a specified resource group. <para><b>Minimum permissions</b></para><para> To run this command, you must have the following permissions: </para><ul><li><para><c>resource-groups:Untag</c></para></li></ul> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.RG.RemoveRGResourceTagCmdlet.Arn"> <summary> <para> <para>The ARN of the resource group from which to remove tags. The command removed both the specified keys and any values associated with those keys.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.RG.RemoveRGResourceTagCmdlet.Key"> <summary> <para> <para>The keys of the tags to be removed.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.RG.RemoveRGResourceTagCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is '*'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ResourceGroups.Model.UntagResponse). Specifying the name of a property of type Amazon.ResourceGroups.Model.UntagResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.RG.RemoveRGResourceTagCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the Key parameter. The -PassThru parameter is deprecated, use -Select '^Key' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.RG.RemoveRGResourceTagCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.RG.UpdateRGAccountSettingCmdlet"> <summary> Turns on or turns off optional features in Resource Groups. <para> The preceding example shows that the request to turn on group lifecycle events is <c>IN_PROGRESS</c>. You can call the <a>GetAccountSettings</a> operation to check for completion by looking for <c>GroupLifecycleEventsStatus</c> to change to <c>ACTIVE</c>. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.RG.UpdateRGAccountSettingCmdlet.GroupLifecycleEventsDesiredStatus"> <summary> <para> <para>Specifies whether you want to turn <a href="https://docs.aws.amazon.com/ARG/latest/userguide/monitor-groups.html">group lifecycle events</a> on or off.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.RG.UpdateRGAccountSettingCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'AccountSettings'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ResourceGroups.Model.UpdateAccountSettingsResponse). Specifying the name of a property of type Amazon.ResourceGroups.Model.UpdateAccountSettingsResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.RG.UpdateRGAccountSettingCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the GroupLifecycleEventsDesiredStatus parameter. The -PassThru parameter is deprecated, use -Select '^GroupLifecycleEventsDesiredStatus' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.RG.UpdateRGAccountSettingCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.RG.UpdateRGGroupCmdlet"> <summary> Updates the description for an existing group. You cannot update the name of a resource group. <para><b>Minimum permissions</b></para><para> To run this command, you must have the following permissions: </para><ul><li><para><c>resource-groups:UpdateGroup</c></para></li></ul> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.RG.UpdateRGGroupCmdlet.Description"> <summary> <para> <para>The new description that you want to update the resource group with. Descriptions can contain letters, numbers, hyphens, underscores, periods, and spaces.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.RG.UpdateRGGroupCmdlet.Group"> <summary> <para> <para>The name or the ARN of the resource group to modify.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.RG.UpdateRGGroupCmdlet.GroupName"> <summary> <para> <para>Don't use this parameter. Use <c>Group</c> instead.</para> </para> <para>This parameter is deprecated.</para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.RG.UpdateRGGroupCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'Group'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ResourceGroups.Model.UpdateGroupResponse). Specifying the name of a property of type Amazon.ResourceGroups.Model.UpdateGroupResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.RG.UpdateRGGroupCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the Description parameter. The -PassThru parameter is deprecated, use -Select '^Description' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.RG.UpdateRGGroupCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.RG.UpdateRGGroupQueryCmdlet"> <summary> Updates the resource query of a group. For more information about resource queries, see <a href="https://docs.aws.amazon.com/ARG/latest/userguide/gettingstarted-query.html#gettingstarted-query-cli-tag">Create a tag-based group in Resource Groups</a>. <para><b>Minimum permissions</b></para><para> To run this command, you must have the following permissions: </para><ul><li><para><c>resource-groups:UpdateGroupQuery</c></para></li></ul> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.RG.UpdateRGGroupQueryCmdlet.Group"> <summary> <para> <para>The name or the ARN of the resource group to query.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.RG.UpdateRGGroupQueryCmdlet.ResourceQuery"> <summary> <para> <para>The resource query to determine which Amazon Web Services resources are members of this resource group.</para><note><para>A resource group can contain either a <c>Configuration</c> or a <c>ResourceQuery</c>, but not both.</para></note> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.RG.UpdateRGGroupQueryCmdlet.GroupName"> <summary> <para> <para>Don't use this parameter. Use <c>Group</c> instead.</para> </para> <para>This parameter is deprecated.</para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.RG.UpdateRGGroupQueryCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'GroupQuery'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ResourceGroups.Model.UpdateGroupQueryResponse). Specifying the name of a property of type Amazon.ResourceGroups.Model.UpdateGroupQueryResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.RG.UpdateRGGroupQueryCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the ResourceQuery parameter. The -PassThru parameter is deprecated, use -Select '^ResourceQuery' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.RG.UpdateRGGroupQueryCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.RG.WriteRGGroupConfigurationCmdlet"> <summary> Attaches a service configuration to the specified group. This occurs asynchronously, and can take time to complete. You can use <a>GetGroupConfiguration</a> to check the status of the update. <para><b>Minimum permissions</b></para><para> To run this command, you must have the following permissions: </para><ul><li><para><c>resource-groups:PutGroupConfiguration</c></para></li></ul> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.RG.WriteRGGroupConfigurationCmdlet.Configuration"> <summary> <para> <para>The new configuration to associate with the specified group. A configuration associates the resource group with an Amazon Web Services service and specifies how the service can interact with the resources in the group. A configuration is an array of <a>GroupConfigurationItem</a> elements.</para><para>For information about the syntax of a service configuration, see <a href="https://docs.aws.amazon.com/ARG/latest/APIReference/about-slg.html">Service configurations for Resource Groups</a>.</para><note><para>A resource group can contain either a <c>Configuration</c> or a <c>ResourceQuery</c>, but not both.</para></note> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.RG.WriteRGGroupConfigurationCmdlet.Group"> <summary> <para> <para>The name or ARN of the resource group with the configuration that you want to update.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.RG.WriteRGGroupConfigurationCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ResourceGroups.Model.PutGroupConfigurationResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.RG.WriteRGGroupConfigurationCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the Group parameter. The -PassThru parameter is deprecated, use -Select '^Group' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.RG.WriteRGGroupConfigurationCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> </members> </doc> |