AWS.Tools.Lightsail.XML

<?xml version="1.0"?>
<doc>
    <assembly>
        <name>AWS.Tools.Lightsail</name>
    </assembly>
    <members>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.AddLSAlarmCmdlet">
            <summary>
            Creates or updates an alarm, and associates it with the specified metric.
             
              
            <para>
            An alarm is used to monitor a single metric for one of your resources. When a metric
            condition is met, the alarm can notify you by email, SMS text message, and a banner
            displayed on the Amazon Lightsail console. For more information, see <a href="https://lightsail.aws.amazon.com/ls/docs/en_us/articles/amazon-lightsail-alarms">Alarms
            in Amazon Lightsail</a>.
            </para><para>
            When this action creates an alarm, the alarm state is immediately set to <c>INSUFFICIENT_DATA</c>.
            The alarm is then evaluated and its state is set appropriately. Any actions associated
            with the new state are then executed.
            </para><para>
            When you update an existing alarm, its state is left unchanged, but the update completely
            overwrites the previous configuration of the alarm. The alarm is then evaluated with
            the updated configuration.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.AddLSAlarmCmdlet.AlarmName">
            <summary>
            <para>
            <para>The name for the alarm. Specify the name of an existing alarm to update, and overwrite
            the previous configuration of the alarm.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.AddLSAlarmCmdlet.ComparisonOperator">
            <summary>
            <para>
            <para>The arithmetic operation to use when comparing the specified statistic to the threshold.
            The specified statistic value is used as the first operand.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.AddLSAlarmCmdlet.ContactProtocol">
            <summary>
            <para>
            <para>The contact protocols to use for the alarm, such as <c>Email</c>, <c>SMS</c> (text
            messaging), or both.</para><para>A notification is sent via the specified contact protocol if notifications are enabled
            for the alarm, and when the alarm is triggered.</para><para>A notification is not sent if a contact protocol is not specified, if the specified
            contact protocol is not configured in the Amazon Web Services Region, or if notifications
            are not enabled for the alarm using the <c>notificationEnabled</c> paramater.</para><para>Use the <c>CreateContactMethod</c> action to configure a contact protocol in an Amazon
            Web Services Region.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.AddLSAlarmCmdlet.DatapointsToAlarm">
            <summary>
            <para>
            <para>The number of data points that must be not within the specified threshold to trigger
            the alarm. If you are setting an "M out of N" alarm, this value (<c>datapointsToAlarm</c>)
            is the M.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.AddLSAlarmCmdlet.EvaluationPeriod">
            <summary>
            <para>
            <para>The number of most recent periods over which data is compared to the specified threshold.
            If you are setting an "M out of N" alarm, this value (<c>evaluationPeriods</c>) is
            the N.</para><para>If you are setting an alarm that requires that a number of consecutive data points
            be breaching to trigger the alarm, this value specifies the rolling period of time
            in which data points are evaluated.</para><para>Each evaluation period is five minutes long. For example, specify an evaluation period
            of 24 to evaluate a metric over a rolling period of two hours.</para><para>You can specify a minimum valuation period of 1 (5 minutes), and a maximum evaluation
            period of 288 (24 hours).</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.AddLSAlarmCmdlet.MetricName">
            <summary>
            <para>
            <para>The name of the metric to associate with the alarm.</para><para>You can configure up to two alarms per metric.</para><para>The following metrics are available for each resource type:</para><ul><li><para><b>Instances</b>: <c>BurstCapacityPercentage</c>, <c>BurstCapacityTime</c>, <c>CPUUtilization</c>,
            <c>NetworkIn</c>, <c>NetworkOut</c>, <c>StatusCheckFailed</c>, <c>StatusCheckFailed_Instance</c>,
            and <c>StatusCheckFailed_System</c>.</para></li><li><para><b>Load balancers</b>: <c>ClientTLSNegotiationErrorCount</c>, <c>HealthyHostCount</c>,
            <c>UnhealthyHostCount</c>, <c>HTTPCode_LB_4XX_Count</c>, <c>HTTPCode_LB_5XX_Count</c>,
            <c>HTTPCode_Instance_2XX_Count</c>, <c>HTTPCode_Instance_3XX_Count</c>, <c>HTTPCode_Instance_4XX_Count</c>,
            <c>HTTPCode_Instance_5XX_Count</c>, <c>InstanceResponseTime</c>, <c>RejectedConnectionCount</c>,
            and <c>RequestCount</c>.</para></li><li><para><b>Relational databases</b>: <c>CPUUtilization</c>, <c>DatabaseConnections</c>, <c>DiskQueueDepth</c>,
            <c>FreeStorageSpace</c>, <c>NetworkReceiveThroughput</c>, and <c>NetworkTransmitThroughput</c>.</para></li></ul><para>For more information about these metrics, see <a href="https://lightsail.aws.amazon.com/ls/docs/en_us/articles/amazon-lightsail-resource-health-metrics#available-metrics">Metrics
            available in Lightsail</a>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.AddLSAlarmCmdlet.MonitoredResourceName">
            <summary>
            <para>
            <para>The name of the Lightsail resource that will be monitored.</para><para>Instances, load balancers, and relational databases are the only Lightsail resources
            that can currently be monitored by alarms.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.AddLSAlarmCmdlet.NotificationEnabled">
            <summary>
            <para>
            <para>Indicates whether the alarm is enabled.</para><para>Notifications are enabled by default if you don't specify this parameter.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.AddLSAlarmCmdlet.NotificationTrigger">
            <summary>
            <para>
            <para>The alarm states that trigger a notification.</para><para>An alarm has the following possible states:</para><ul><li><para><c>ALARM</c> - The metric is outside of the defined threshold.</para></li><li><para><c>INSUFFICIENT_DATA</c> - The alarm has just started, the metric is not available,
            or not enough data is available for the metric to determine the alarm state.</para></li><li><para><c>OK</c> - The metric is within the defined threshold.</para></li></ul><para>When you specify a notification trigger, the <c>ALARM</c> state must be specified.
            The <c>INSUFFICIENT_DATA</c> and <c>OK</c> states can be specified in addition to
            the <c>ALARM</c> state.</para><ul><li><para>If you specify <c>OK</c> as an alarm trigger, a notification is sent when the alarm
            switches from an <c>ALARM</c> or <c>INSUFFICIENT_DATA</c> alarm state to an <c>OK</c>
            state. This can be thought of as an <i>all clear</i> alarm notification.</para></li><li><para>If you specify <c>INSUFFICIENT_DATA</c> as the alarm trigger, a notification is sent
            when the alarm switches from an <c>OK</c> or <c>ALARM</c> alarm state to an <c>INSUFFICIENT_DATA</c>
            state.</para></li></ul><para>The notification trigger defaults to <c>ALARM</c> if you don't specify this parameter.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.AddLSAlarmCmdlet.Threshold">
            <summary>
            <para>
            <para>The value against which the specified statistic is compared.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.AddLSAlarmCmdlet.TreatMissingData">
            <summary>
            <para>
            <para>Sets how this alarm will handle missing data points.</para><para>An alarm can treat missing data in the following ways:</para><ul><li><para><c>breaching</c> - Assume the missing data is not within the threshold. Missing data
            counts towards the number of times the metric is not within the threshold.</para></li><li><para><c>notBreaching</c> - Assume the missing data is within the threshold. Missing data
            does not count towards the number of times the metric is not within the threshold.</para></li><li><para><c>ignore</c> - Ignore the missing data. Maintains the current alarm state.</para></li><li><para><c>missing</c> - Missing data is treated as missing.</para></li></ul><para>If <c>treatMissingData</c> is not specified, the default behavior of <c>missing</c>
            is used.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.AddLSAlarmCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Operations'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.PutAlarmResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.PutAlarmResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.AddLSAlarmCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the AlarmName parameter.
            The -PassThru parameter is deprecated, use -Select '^AlarmName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.AddLSAlarmCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.AddLSDiskCmdlet">
            <summary>
            Attaches a block storage disk to a running or stopped Lightsail instance and exposes
            it to the instance with the specified disk name.
             
              
            <para>
            The <c>attach disk</c> operation supports tag-based access control via resource tags
            applied to the resource identified by <c>disk name</c>. For more information, see
            the <a href="https://lightsail.aws.amazon.com/ls/docs/en_us/articles/amazon-lightsail-controlling-access-using-tags">Amazon
            Lightsail Developer Guide</a>.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.AddLSDiskCmdlet.AutoMounting">
            <summary>
            <para>
            <para>A Boolean value used to determine the automatic mounting of a storage volume to a
            virtual computer. The default value is <c>False</c>.</para><important><para>This value only applies to Lightsail for Research resources.</para></important>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.AddLSDiskCmdlet.DiskName">
            <summary>
            <para>
            <para>The unique Lightsail disk name (<c>my-disk</c>).</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.AddLSDiskCmdlet.DiskPath">
            <summary>
            <para>
            <para>The disk path to expose to the instance (<c>/dev/xvdf</c>).</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.AddLSDiskCmdlet.InstanceName">
            <summary>
            <para>
            <para>The name of the Lightsail instance where you want to utilize the storage disk.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.AddLSDiskCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Operations'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.AttachDiskResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.AttachDiskResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.AddLSDiskCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the InstanceName parameter.
            The -PassThru parameter is deprecated, use -Select '^InstanceName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.AddLSDiskCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.AddLSInstancesToLoadBalancerCmdlet">
            <summary>
            Attaches one or more Lightsail instances to a load balancer.
             
              
            <para>
            After some time, the instances are attached to the load balancer and the health check
            status is available.
            </para><para>
            The <c>attach instances to load balancer</c> operation supports tag-based access control
            via resource tags applied to the resource identified by <c>load balancer name</c>.
            For more information, see the <a href="https://lightsail.aws.amazon.com/ls/docs/en_us/articles/amazon-lightsail-controlling-access-using-tags">Lightsail
            Developer Guide</a>.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.AddLSInstancesToLoadBalancerCmdlet.InstanceName">
            <summary>
            <para>
            <para>An array of strings representing the instance name(s) you want to attach to your load
            balancer.</para><para>An instance must be <c>running</c> before you can attach it to your load balancer.</para><para>There are no additional limits on the number of instances you can attach to your load
            balancer, aside from the limit of Lightsail instances you can create in your account
            (20).</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.AddLSInstancesToLoadBalancerCmdlet.LoadBalancerName">
            <summary>
            <para>
            <para>The name of the load balancer.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.AddLSInstancesToLoadBalancerCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Operations'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.AttachInstancesToLoadBalancerResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.AttachInstancesToLoadBalancerResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.AddLSInstancesToLoadBalancerCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the LoadBalancerName parameter.
            The -PassThru parameter is deprecated, use -Select '^LoadBalancerName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.AddLSInstancesToLoadBalancerCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.AddLSLoadBalancerTlsCertificateCmdlet">
            <summary>
            Attaches a Transport Layer Security (TLS) certificate to your load balancer. TLS is
            just an updated, more secure version of Secure Socket Layer (SSL).
             
              
            <para>
            Once you create and validate your certificate, you can attach it to your load balancer.
            You can also use this API to rotate the certificates on your account. Use the <c>AttachLoadBalancerTlsCertificate</c>
            action with the non-attached certificate, and it will replace the existing one and
            become the attached certificate.
            </para><para>
            The <c>AttachLoadBalancerTlsCertificate</c> operation supports tag-based access control
            via resource tags applied to the resource identified by <c>load balancer name</c>.
            For more information, see the <a href="https://lightsail.aws.amazon.com/ls/docs/en_us/articles/amazon-lightsail-controlling-access-using-tags">Amazon
            Lightsail Developer Guide</a>.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.AddLSLoadBalancerTlsCertificateCmdlet.CertificateName">
            <summary>
            <para>
            <para>The name of your SSL/TLS certificate.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.AddLSLoadBalancerTlsCertificateCmdlet.LoadBalancerName">
            <summary>
            <para>
            <para>The name of the load balancer to which you want to associate the SSL/TLS certificate.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.AddLSLoadBalancerTlsCertificateCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Operations'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.AttachLoadBalancerTlsCertificateResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.AttachLoadBalancerTlsCertificateResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.AddLSLoadBalancerTlsCertificateCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the CertificateName parameter.
            The -PassThru parameter is deprecated, use -Select '^CertificateName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.AddLSLoadBalancerTlsCertificateCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.AddLSPeerVpcCmdlet">
            <summary>
            Peers the Lightsail VPC with the user's default VPC.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.AddLSPeerVpcCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Operation'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.PeerVpcResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.PeerVpcResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.AddLSPeerVpcCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.AddLSResourceTagCmdlet">
            <summary>
            Adds one or more tags to the specified Amazon Lightsail resource. Each resource can
            have a maximum of 50 tags. Each tag consists of a key and an optional value. Tag keys
            must be unique per resource. For more information about tags, see the <a href="https://lightsail.aws.amazon.com/ls/docs/en_us/articles/amazon-lightsail-tags">Amazon
            Lightsail Developer Guide</a>.
             
              
            <para>
            The <c>tag resource</c> operation supports tag-based access control via request tags
            and resource tags applied to the resource identified by <c>resource name</c>. For
            more information, see the <a href="https://lightsail.aws.amazon.com/ls/docs/en_us/articles/amazon-lightsail-controlling-access-using-tags">Amazon
            Lightsail Developer Guide</a>.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.AddLSResourceTagCmdlet.ResourceArn">
            <summary>
            <para>
            <para>The Amazon Resource Name (ARN) of the resource to which you want to add a tag.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.AddLSResourceTagCmdlet.ResourceName">
            <summary>
            <para>
            <para>The name of the resource to which you are adding tags.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.AddLSResourceTagCmdlet.Tag">
            <summary>
            <para>
            <para>The tag key and optional value.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.AddLSResourceTagCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Operations'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.TagResourceResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.TagResourceResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.AddLSResourceTagCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the ResourceName parameter.
            The -PassThru parameter is deprecated, use -Select '^ResourceName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.AddLSResourceTagCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.CloseLSInstancePublicPortCmdlet">
            <summary>
            Closes ports for a specific Amazon Lightsail instance.
             
              
            <para>
            The <c>CloseInstancePublicPorts</c> action supports tag-based access control via resource
            tags applied to the resource identified by <c>instanceName</c>. For more information,
            see the <a href="https://lightsail.aws.amazon.com/ls/docs/en_us/articles/amazon-lightsail-controlling-access-using-tags">Amazon
            Lightsail Developer Guide</a>.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.CloseLSInstancePublicPortCmdlet.PortInfo_CidrListAlias">
            <summary>
            <para>
            <para>An alias that defines access for a preconfigured range of IP addresses.</para><para>The only alias currently supported is <c>lightsail-connect</c>, which allows IP addresses
            of the browser-based RDP/SSH client in the Lightsail console to connect to your instance.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.CloseLSInstancePublicPortCmdlet.PortInfo_Cidr">
            <summary>
            <para>
            <para>The IPv4 address, or range of IPv4 addresses (in CIDR notation) that are allowed to
            connect to an instance through the ports, and the protocol.</para><note><para>The <c>ipv6Cidrs</c> parameter lists the IPv6 addresses that are allowed to connect
            to an instance.</para></note><para>Examples:</para><ul><li><para>To allow the IP address <c>192.0.2.44</c>, specify <c>192.0.2.44</c> or <c>192.0.2.44/32</c>.
            </para></li><li><para>To allow the IP addresses <c>192.0.2.0</c> to <c>192.0.2.255</c>, specify <c>192.0.2.0/24</c>.</para></li></ul><para>For more information about CIDR block notation, see <a href="https://en.wikipedia.org/wiki/Classless_Inter-Domain_Routing#CIDR_notation">Classless
            Inter-Domain Routing</a> on <i>Wikipedia</i>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.CloseLSInstancePublicPortCmdlet.PortInfo_FromPort">
            <summary>
            <para>
            <para>The first port in a range of open ports on an instance.</para><para>Allowed ports:</para><ul><li><para>TCP and UDP - <c>0</c> to <c>65535</c></para></li><li><para>ICMP - The ICMP type for IPv4 addresses. For example, specify <c>8</c> as the <c>fromPort</c>
            (ICMP type), and <c>-1</c> as the <c>toPort</c> (ICMP code), to enable ICMP Ping.
            For more information, see <a href="https://en.wikipedia.org/wiki/Internet_Control_Message_Protocol#Control_messages">Control
            Messages</a> on <i>Wikipedia</i>.</para></li><li><para>ICMPv6 - The ICMP type for IPv6 addresses. For example, specify <c>128</c> as the
            <c>fromPort</c> (ICMPv6 type), and <c>0</c> as <c>toPort</c> (ICMPv6 code). For more
            information, see <a href="https://en.wikipedia.org/wiki/Internet_Control_Message_Protocol_for_IPv6">Internet
            Control Message Protocol for IPv6</a>.</para></li></ul>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.CloseLSInstancePublicPortCmdlet.InstanceName">
            <summary>
            <para>
            <para>The name of the instance for which to close ports.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.CloseLSInstancePublicPortCmdlet.PortInfo_Ipv6Cidr">
            <summary>
            <para>
            <para>The IPv6 address, or range of IPv6 addresses (in CIDR notation) that are allowed to
            connect to an instance through the ports, and the protocol. Only devices with an IPv6
            address can connect to an instance through IPv6; otherwise, IPv4 should be used.</para><note><para>The <c>cidrs</c> parameter lists the IPv4 addresses that are allowed to connect to
            an instance.</para></note><para>For more information about CIDR block notation, see <a href="https://en.wikipedia.org/wiki/Classless_Inter-Domain_Routing#CIDR_notation">Classless
            Inter-Domain Routing</a> on <i>Wikipedia</i>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.CloseLSInstancePublicPortCmdlet.PortInfo_Protocol">
            <summary>
            <para>
            <para>The IP protocol name.</para><para>The name can be one of the following:</para><ul><li><para><c>tcp</c> - Transmission Control Protocol (TCP) provides reliable, ordered, and
            error-checked delivery of streamed data between applications running on hosts communicating
            by an IP network. If you have an application that doesn't require reliable data stream
            service, use UDP instead.</para></li><li><para><c>all</c> - All transport layer protocol types. For more general information, see
            <a href="https://en.wikipedia.org/wiki/Transport_layer">Transport layer</a> on <i>Wikipedia</i>.</para></li><li><para><c>udp</c> - With User Datagram Protocol (UDP), computer applications can send messages
            (or datagrams) to other hosts on an Internet Protocol (IP) network. Prior communications
            are not required to set up transmission channels or data paths. Applications that
            don't require reliable data stream service can use UDP, which provides a connectionless
            datagram service that emphasizes reduced latency over reliability. If you do require
            reliable data stream service, use TCP instead.</para></li><li><para><c>icmp</c> - Internet Control Message Protocol (ICMP) is used to send error messages
            and operational information indicating success or failure when communicating with
            an instance. For example, an error is indicated when an instance could not be reached.
            When you specify <c>icmp</c> as the <c>protocol</c>, you must specify the ICMP type
            using the <c>fromPort</c> parameter, and ICMP code using the <c>toPort</c> parameter.</para></li><li><para><c>icmp6</c> - Internet Control Message Protocol (ICMP) for IPv6. When you specify
            <c>icmp6</c> as the <c>protocol</c>, you must specify the ICMP type using the <c>fromPort</c>
            parameter, and ICMP code using the <c>toPort</c> parameter.</para></li></ul>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.CloseLSInstancePublicPortCmdlet.PortInfo_ToPort">
            <summary>
            <para>
            <para>The last port in a range of open ports on an instance.</para><para>Allowed ports:</para><ul><li><para>TCP and UDP - <c>0</c> to <c>65535</c></para></li><li><para>ICMP - The ICMP code for IPv4 addresses. For example, specify <c>8</c> as the <c>fromPort</c>
            (ICMP type), and <c>-1</c> as the <c>toPort</c> (ICMP code), to enable ICMP Ping.
            For more information, see <a href="https://en.wikipedia.org/wiki/Internet_Control_Message_Protocol#Control_messages">Control
            Messages</a> on <i>Wikipedia</i>.</para></li><li><para>ICMPv6 - The ICMP code for IPv6 addresses. For example, specify <c>128</c> as the
            <c>fromPort</c> (ICMPv6 type), and <c>0</c> as <c>toPort</c> (ICMPv6 code). For more
            information, see <a href="https://en.wikipedia.org/wiki/Internet_Control_Message_Protocol_for_IPv6">Internet
            Control Message Protocol for IPv6</a>.</para></li></ul>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.CloseLSInstancePublicPortCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Operation'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.CloseInstancePublicPortsResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.CloseInstancePublicPortsResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.CloseLSInstancePublicPortCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the InstanceName parameter.
            The -PassThru parameter is deprecated, use -Select '^InstanceName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.CloseLSInstancePublicPortCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.CopyLSSnapshotCmdlet">
            <summary>
            Copies a manual snapshot of an instance or disk as another manual snapshot, or copies
            an automatic snapshot of an instance or disk as a manual snapshot. This operation
            can also be used to copy a manual or automatic snapshot of an instance or a disk from
            one Amazon Web Services Region to another in Amazon Lightsail.
             
              
            <para>
            When copying a <i>manual snapshot</i>, be sure to define the <c>source region</c>,
            <c>source snapshot name</c>, and <c>target snapshot name</c> parameters.
            </para><para>
            When copying an <i>automatic snapshot</i>, be sure to define the <c>source region</c>,
            <c>source resource name</c>, <c>target snapshot name</c>, and either the <c>restore
            date</c> or the <c>use latest restorable auto snapshot</c> parameters.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.CopyLSSnapshotCmdlet.RestoreDate">
            <summary>
            <para>
            <para>The date of the source automatic snapshot to copy. Use the <c>get auto snapshots</c>
            operation to identify the dates of the available automatic snapshots.</para><para>Constraints:</para><ul><li><para>Must be specified in <c>YYYY-MM-DD</c> format.</para></li><li><para>This parameter cannot be defined together with the <c>use latest restorable auto snapshot</c>
            parameter. The <c>restore date</c> and <c>use latest restorable auto snapshot</c>
            parameters are mutually exclusive.</para></li><li><para>Define this parameter only when copying an automatic snapshot as a manual snapshot.
            For more information, see the <a href="https://lightsail.aws.amazon.com/ls/docs/en_us/articles/amazon-lightsail-keeping-automatic-snapshots">Amazon
            Lightsail Developer Guide</a>.</para></li></ul>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.CopyLSSnapshotCmdlet.SourceRegion">
            <summary>
            <para>
            <para>The Amazon Web Services Region where the source manual or automatic snapshot is located.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.CopyLSSnapshotCmdlet.SourceResourceName">
            <summary>
            <para>
            <para>The name of the source instance or disk from which the source automatic snapshot was
            created.</para><para>Constraint:</para><ul><li><para>Define this parameter only when copying an automatic snapshot as a manual snapshot.
            For more information, see the <a href="https://lightsail.aws.amazon.com/ls/docs/en_us/articles/amazon-lightsail-keeping-automatic-snapshots">Amazon
            Lightsail Developer Guide</a>.</para></li></ul>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.CopyLSSnapshotCmdlet.SourceSnapshotName">
            <summary>
            <para>
            <para>The name of the source manual snapshot to copy.</para><para>Constraint:</para><ul><li><para>Define this parameter only when copying a manual snapshot as another manual snapshot.</para></li></ul>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.CopyLSSnapshotCmdlet.TargetSnapshotName">
            <summary>
            <para>
            <para>The name of the new manual snapshot to be created as a copy.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.CopyLSSnapshotCmdlet.UseLatestRestorableAutoSnapshot">
            <summary>
            <para>
            <para>A Boolean value to indicate whether to use the latest available automatic snapshot
            of the specified source instance or disk.</para><para>Constraints:</para><ul><li><para>This parameter cannot be defined together with the <c>restore date</c> parameter.
            The <c>use latest restorable auto snapshot</c> and <c>restore date</c> parameters
            are mutually exclusive.</para></li><li><para>Define this parameter only when copying an automatic snapshot as a manual snapshot.
            For more information, see the <a href="https://lightsail.aws.amazon.com/ls/docs/en_us/articles/amazon-lightsail-keeping-automatic-snapshots">Amazon
            Lightsail Developer Guide</a>.</para></li></ul>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.CopyLSSnapshotCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Operations'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.CopySnapshotResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.CopySnapshotResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.CopyLSSnapshotCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the TargetSnapshotName parameter.
            The -PassThru parameter is deprecated, use -Select '^TargetSnapshotName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.CopyLSSnapshotCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.DisableLSAddOnCmdlet">
            <summary>
            Disables an add-on for an Amazon Lightsail resource. For more information, see the
            <a href="https://lightsail.aws.amazon.com/ls/docs/en_us/articles/amazon-lightsail-configuring-automatic-snapshots">Amazon
            Lightsail Developer Guide</a>.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.DisableLSAddOnCmdlet.AddOnType">
            <summary>
            <para>
            <para>The add-on type to disable.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.DisableLSAddOnCmdlet.ResourceName">
            <summary>
            <para>
            <para>The name of the source resource for which to disable the add-on.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.DisableLSAddOnCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Operations'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.DisableAddOnResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.DisableAddOnResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.DisableLSAddOnCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the ResourceName parameter.
            The -PassThru parameter is deprecated, use -Select '^ResourceName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.DisableLSAddOnCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.DismountLSCertificateFromDistributionCmdlet">
            <summary>
            Detaches an SSL/TLS certificate from your Amazon Lightsail content delivery network
            (CDN) distribution.
             
              
            <para>
            After the certificate is detached, your distribution stops accepting traffic for all
            of the domains that are associated with the certificate.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.DismountLSCertificateFromDistributionCmdlet.DistributionName">
            <summary>
            <para>
            <para>The name of the distribution from which to detach the certificate.</para><para>Use the <c>GetDistributions</c> action to get a list of distribution names that you
            can specify.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.DismountLSCertificateFromDistributionCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Operation'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.DetachCertificateFromDistributionResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.DetachCertificateFromDistributionResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.DismountLSCertificateFromDistributionCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the DistributionName parameter.
            The -PassThru parameter is deprecated, use -Select '^DistributionName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.DismountLSCertificateFromDistributionCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.DismountLSDiskCmdlet">
            <summary>
            Detaches a stopped block storage disk from a Lightsail instance. Make sure to unmount
            any file systems on the device within your operating system before stopping the instance
            and detaching the disk.
             
              
            <para>
            The <c>detach disk</c> operation supports tag-based access control via resource tags
            applied to the resource identified by <c>disk name</c>. For more information, see
            the <a href="https://lightsail.aws.amazon.com/ls/docs/en_us/articles/amazon-lightsail-controlling-access-using-tags">Amazon
            Lightsail Developer Guide</a>.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.DismountLSDiskCmdlet.DiskName">
            <summary>
            <para>
            <para>The unique name of the disk you want to detach from your instance (<c>my-disk</c>).</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.DismountLSDiskCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Operations'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.DetachDiskResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.DetachDiskResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.DismountLSDiskCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the DiskName parameter.
            The -PassThru parameter is deprecated, use -Select '^DiskName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.DismountLSDiskCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.DismountLSInstancesFromLoadBalancerCmdlet">
            <summary>
            Detaches the specified instances from a Lightsail load balancer.
             
              
            <para>
            This operation waits until the instances are no longer needed before they are detached
            from the load balancer.
            </para><para>
            The <c>detach instances from load balancer</c> operation supports tag-based access
            control via resource tags applied to the resource identified by <c>load balancer name</c>.
            For more information, see the <a href="https://lightsail.aws.amazon.com/ls/docs/en_us/articles/amazon-lightsail-controlling-access-using-tags">Amazon
            Lightsail Developer Guide</a>.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.DismountLSInstancesFromLoadBalancerCmdlet.InstanceName">
            <summary>
            <para>
            <para>An array of strings containing the names of the instances you want to detach from
            the load balancer.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.DismountLSInstancesFromLoadBalancerCmdlet.LoadBalancerName">
            <summary>
            <para>
            <para>The name of the Lightsail load balancer.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.DismountLSInstancesFromLoadBalancerCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Operations'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.DetachInstancesFromLoadBalancerResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.DetachInstancesFromLoadBalancerResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.DismountLSInstancesFromLoadBalancerCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the InstanceName parameter.
            The -PassThru parameter is deprecated, use -Select '^InstanceName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.DismountLSInstancesFromLoadBalancerCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.DismountLSStaticIpCmdlet">
            <summary>
            Detaches a static IP from the Amazon Lightsail instance to which it is attached.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.DismountLSStaticIpCmdlet.StaticIpName">
            <summary>
            <para>
            <para>The name of the static IP to detach from the instance.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.DismountLSStaticIpCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Operations'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.DetachStaticIpResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.DetachStaticIpResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.DismountLSStaticIpCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the StaticIpName parameter.
            The -PassThru parameter is deprecated, use -Select '^StaticIpName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.DismountLSStaticIpCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.EnableLSAddOnCmdlet">
            <summary>
            Enables or modifies an add-on for an Amazon Lightsail resource. For more information,
            see the <a href="https://lightsail.aws.amazon.com/ls/docs/en_us/articles/amazon-lightsail-configuring-automatic-snapshots">Amazon
            Lightsail Developer Guide</a>.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.EnableLSAddOnCmdlet.AddOnRequest_AddOnType">
            <summary>
            <para>
            <para>The add-on type.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.EnableLSAddOnCmdlet.StopInstanceOnIdleRequest_Duration">
            <summary>
            <para>
            <para>The amount of idle time in minutes after which your virtual computer will automatically
            stop.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.EnableLSAddOnCmdlet.ResourceName">
            <summary>
            <para>
            <para>The name of the source resource for which to enable or modify the add-on.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.EnableLSAddOnCmdlet.AutoSnapshotAddOnRequest_SnapshotTimeOfDay">
            <summary>
            <para>
            <para>The daily time when an automatic snapshot will be created.</para><para>Constraints:</para><ul><li><para>Must be in <c>HH:00</c> format, and in an hourly increment.</para></li><li><para>Specified in Coordinated Universal Time (UTC).</para></li><li><para>The snapshot will be automatically created between the time specified and up to 45
            minutes after.</para></li></ul>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.EnableLSAddOnCmdlet.StopInstanceOnIdleRequest_Threshold">
            <summary>
            <para>
            <para>The value to compare with the duration.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.EnableLSAddOnCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Operations'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.EnableAddOnResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.EnableAddOnResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.EnableLSAddOnCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the ResourceName parameter.
            The -PassThru parameter is deprecated, use -Select '^ResourceName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.EnableLSAddOnCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.ExportLSSnapshotCmdlet">
            <summary>
            Exports an Amazon Lightsail instance or block storage disk snapshot to Amazon Elastic
            Compute Cloud (Amazon EC2). This operation results in an export snapshot record that
            can be used with the <c>create cloud formation stack</c> operation to create new Amazon
            EC2 instances.
             
              
            <para>
            Exported instance snapshots appear in Amazon EC2 as Amazon Machine Images (AMIs),
            and the instance system disk appears as an Amazon Elastic Block Store (Amazon EBS)
            volume. Exported disk snapshots appear in Amazon EC2 as Amazon EBS volumes. Snapshots
            are exported to the same Amazon Web Services Region in Amazon EC2 as the source Lightsail
            snapshot.
            </para><para>
            The <c>export snapshot</c> operation supports tag-based access control via resource
            tags applied to the resource identified by <c>source snapshot name</c>. For more information,
            see the <a href="https://lightsail.aws.amazon.com/ls/docs/en_us/articles/amazon-lightsail-controlling-access-using-tags">Amazon
            Lightsail Developer Guide</a>.
            </para><note><para>
            Use the <c>get instance snapshots</c> or <c>get disk snapshots</c> operations to get
            a list of snapshots that you can export to Amazon EC2.
            </para></note>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.ExportLSSnapshotCmdlet.SourceSnapshotName">
            <summary>
            <para>
            <para>The name of the instance or disk snapshot to be exported to Amazon EC2.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.ExportLSSnapshotCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Operations'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.ExportSnapshotResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.ExportSnapshotResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.ExportLSSnapshotCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the SourceSnapshotName parameter.
            The -PassThru parameter is deprecated, use -Select '^SourceSnapshotName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.ExportLSSnapshotCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.GetLSActiveNameListCmdlet">
            <summary>
            Returns the names of all active (not deleted) resources.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSActiveNameListCmdlet.PageToken">
            <summary>
            <para>
            <para>The token to advance to the next page of results from your request.</para><para>To get a page token, perform an initial <c>GetActiveNames</c> request. If your results
            are paginated, the response will return a next page token that you can specify as
            the page token in a subsequent request.</para>
            </para>
            <para>
            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.
            <br/>In order to manually control output pagination, use '-PageToken $null' for the first call and '-PageToken $AWSHistory.LastServiceResponse.NextPageToken' for subsequent calls.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSActiveNameListCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'ActiveNames'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.GetActiveNamesResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.GetActiveNamesResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSActiveNameListCmdlet.NoAutoIteration">
            <summary>
            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple
            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of PageToken
            as the start point.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.GetLSAlarmCmdlet">
            <summary>
            Returns information about the configured alarms. Specify an alarm name in your request
            to return information about a specific alarm, or specify a monitored resource name
            to return information about all alarms for a specific resource.
             
              
            <para>
            An alarm is used to monitor a single metric for one of your resources. When a metric
            condition is met, the alarm can notify you by email, SMS text message, and a banner
            displayed on the Amazon Lightsail console. For more information, see <a href="https://lightsail.aws.amazon.com/ls/docs/en_us/articles/amazon-lightsail-alarms">Alarms
            in Amazon Lightsail</a>.
            </para><br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSAlarmCmdlet.AlarmName">
            <summary>
            <para>
            <para>The name of the alarm.</para><para>Specify an alarm name to return information about a specific alarm.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSAlarmCmdlet.MonitoredResourceName">
            <summary>
            <para>
            <para>The name of the Lightsail resource being monitored by the alarm.</para><para>Specify a monitored resource name to return information about all alarms for a specific
            resource.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSAlarmCmdlet.PageToken">
            <summary>
            <para>
            <para>The token to advance to the next page of results from your request.</para><para>To get a page token, perform an initial <c>GetAlarms</c> request. If your results
            are paginated, the response will return a next page token that you can specify as
            the page token in a subsequent request.</para>
            </para>
            <para>
            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.
            <br/>In order to manually control output pagination, use '-PageToken $null' for the first call and '-PageToken $AWSHistory.LastServiceResponse.NextPageToken' for subsequent calls.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSAlarmCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Alarms'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.GetAlarmsResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.GetAlarmsResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSAlarmCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the AlarmName parameter.
            The -PassThru parameter is deprecated, use -Select '^AlarmName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSAlarmCmdlet.NoAutoIteration">
            <summary>
            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple
            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of PageToken
            as the start point.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.GetLSAutoSnapshotCmdlet">
            <summary>
            Returns the available automatic snapshots for an instance or disk. For more information,
            see the <a href="https://lightsail.aws.amazon.com/ls/docs/en_us/articles/amazon-lightsail-configuring-automatic-snapshots">Amazon
            Lightsail Developer Guide</a>.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSAutoSnapshotCmdlet.ResourceName">
            <summary>
            <para>
            <para>The name of the source instance or disk from which to get automatic snapshot information.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSAutoSnapshotCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is '*'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.GetAutoSnapshotsResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.GetAutoSnapshotsResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSAutoSnapshotCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the ResourceName parameter.
            The -PassThru parameter is deprecated, use -Select '^ResourceName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.GetLSBlueprintListCmdlet">
            <summary>
            Returns the list of available instance images, or <i>blueprints</i>. You can use a
            blueprint to create a new instance already running a specific operating system, as
            well as a preinstalled app or development stack. The software each instance is running
            depends on the blueprint image you choose.
             
             <note><para>
            Use active blueprints when creating new instances. Inactive blueprints are listed
            to support customers with existing instances and are not necessarily available to
            create new instances. Blueprints are marked inactive when they become outdated due
            to operating system updates or new application releases.
            </para></note><br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSBlueprintListCmdlet.AppCategory">
            <summary>
            <para>
            <para>Returns a list of blueprints that are specific to Lightsail for Research.</para><important><para>You must use this parameter to view Lightsail for Research blueprints.</para></important>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSBlueprintListCmdlet.IncludeInactive">
            <summary>
            <para>
            <para>A Boolean value that indicates whether to include inactive (unavailable) blueprints
            in the response of your request.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSBlueprintListCmdlet.PageToken">
            <summary>
            <para>
            <para>The token to advance to the next page of results from your request.</para><para>To get a page token, perform an initial <c>GetBlueprints</c> request. If your results
            are paginated, the response will return a next page token that you can specify as
            the page token in a subsequent request.</para>
            </para>
            <para>
            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.
            <br/>In order to manually control output pagination, use '-PageToken $null' for the first call and '-PageToken $AWSHistory.LastServiceResponse.NextPageToken' for subsequent calls.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSBlueprintListCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Blueprints'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.GetBlueprintsResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.GetBlueprintsResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSBlueprintListCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the IncludeInactive parameter.
            The -PassThru parameter is deprecated, use -Select '^IncludeInactive' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSBlueprintListCmdlet.NoAutoIteration">
            <summary>
            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple
            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of PageToken
            as the start point.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.GetLSBucketCmdlet">
            <summary>
            Returns information about one or more Amazon Lightsail buckets. The information returned
            includes the synchronization status of the Amazon Simple Storage Service (Amazon S3)
            account-level block public access feature for your Lightsail buckets.
             
              
            <para>
            For more information about buckets, see <a href="https://lightsail.aws.amazon.com/ls/docs/en_us/articles/buckets-in-amazon-lightsail">Buckets
            in Amazon Lightsail</a> in the <i>Amazon Lightsail Developer Guide</i>.
            </para><br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSBucketCmdlet.BucketName">
            <summary>
            <para>
            <para>The name of the bucket for which to return information.</para><para>When omitted, the response includes all of your buckets in the Amazon Web Services
            Region where the request is made.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSBucketCmdlet.IncludeConnectedResource">
            <summary>
            <para>
            <para>A Boolean value that indicates whether to include Lightsail instances that were given
            access to the bucket using the <a href="https://docs.aws.amazon.com/lightsail/2016-11-28/api-reference/API_SetResourceAccessForBucket.html">SetResourceAccessForBucket</a>
            action.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSBucketCmdlet.PageToken">
            <summary>
            <para>
            <para>The token to advance to the next page of results from your request.</para><para>To get a page token, perform an initial <c>GetBuckets</c> request. If your results
            are paginated, the response will return a next page token that you can specify as
            the page token in a subsequent request.</para>
            </para>
            <para>
            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.
            <br/>In order to manually control output pagination, use '-PageToken $null' for the first call and '-PageToken $AWSHistory.LastServiceResponse.NextPageToken' for subsequent calls.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSBucketCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Buckets'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.GetBucketsResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.GetBucketsResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSBucketCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the BucketName parameter.
            The -PassThru parameter is deprecated, use -Select '^BucketName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSBucketCmdlet.NoAutoIteration">
            <summary>
            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple
            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of PageToken
            as the start point.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.GetLSBucketAccessKeyCmdlet">
            <summary>
            Returns the existing access key IDs for the specified Amazon Lightsail bucket.
             
             <important><para>
            This action does not return the secret access key value of an access key. You can
            get a secret access key only when you create it from the response of the <a href="https://docs.aws.amazon.com/lightsail/2016-11-28/api-reference/API_CreateBucketAccessKey.html">CreateBucketAccessKey</a>
            action. If you lose the secret access key, you must create a new access key.
            </para></important>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSBucketAccessKeyCmdlet.BucketName">
            <summary>
            <para>
            <para>The name of the bucket for which to return access keys.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSBucketAccessKeyCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'AccessKeys'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.GetBucketAccessKeysResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.GetBucketAccessKeysResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSBucketAccessKeyCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the BucketName parameter.
            The -PassThru parameter is deprecated, use -Select '^BucketName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.GetLSBucketBundleCmdlet">
            <summary>
            Returns the bundles that you can apply to a Amazon Lightsail bucket.
             
              
            <para>
            The bucket bundle specifies the monthly cost, storage quota, and data transfer quota
            for a bucket.
            </para><para>
            Use the <a href="https://docs.aws.amazon.com/lightsail/2016-11-28/api-reference/API_UpdateBucketBundle.html">UpdateBucketBundle</a>
            action to update the bundle for a bucket.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSBucketBundleCmdlet.IncludeInactive">
            <summary>
            <para>
            <para>A Boolean value that indicates whether to include inactive (unavailable) bundles in
            the response of your request.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSBucketBundleCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Bundles'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.GetBucketBundlesResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.GetBucketBundlesResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSBucketBundleCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the IncludeInactive parameter.
            The -PassThru parameter is deprecated, use -Select '^IncludeInactive' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.GetLSBucketMetricDataCmdlet">
            <summary>
            Returns the data points of a specific metric for an Amazon Lightsail bucket.
             
              
            <para>
            Metrics report the utilization of a bucket. View and collect metric data regularly
            to monitor the number of objects stored in a bucket (including object versions) and
            the storage space used by those objects.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSBucketMetricDataCmdlet.BucketName">
            <summary>
            <para>
            <para>The name of the bucket for which to get metric data.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSBucketMetricDataCmdlet.EndTime">
            <summary>
            <para>
            <para>The timestamp indicating the latest data to be returned.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSBucketMetricDataCmdlet.MetricName">
            <summary>
            <para>
            <para>The metric for which you want to return information.</para><para>Valid bucket metric names are listed below, along with the most useful statistics
            to include in your request, and the published unit value.</para><note><para>These bucket metrics are reported once per day.</para></note><ul><li><para><b><c>BucketSizeBytes</c></b> - The amount of data in bytes stored in a bucket.
            This value is calculated by summing the size of all objects in the bucket (including
            object versions), including the size of all parts for all incomplete multipart uploads
            to the bucket.</para><para>Statistics: The most useful statistic is <c>Maximum</c>.</para><para>Unit: The published unit is <c>Bytes</c>.</para></li><li><para><b><c>NumberOfObjects</c></b> - The total number of objects stored in a bucket.
            This value is calculated by counting all objects in the bucket (including object versions)
            and the total number of parts for all incomplete multipart uploads to the bucket.</para><para>Statistics: The most useful statistic is <c>Average</c>.</para><para>Unit: The published unit is <c>Count</c>.</para></li></ul>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSBucketMetricDataCmdlet.Period">
            <summary>
            <para>
            <para>The granularity, in seconds, of the returned data points.</para><note><para>Bucket storage metrics are reported once per day. Therefore, you should specify a
            period of 86400 seconds, which is the number of seconds in a day.</para></note>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSBucketMetricDataCmdlet.StartTime">
            <summary>
            <para>
            <para>The timestamp indicating the earliest data to be returned.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSBucketMetricDataCmdlet.Statistic">
            <summary>
            <para>
            <para>The statistic for the metric.</para><para>The following statistics are available:</para><ul><li><para><c>Minimum</c> - The lowest value observed during the specified period. Use this
            value to determine low volumes of activity for your application.</para></li><li><para><c>Maximum</c> - The highest value observed during the specified period. Use this
            value to determine high volumes of activity for your application.</para></li><li><para><c>Sum</c> - The sum of all values submitted for the matching metric. You can use
            this statistic to determine the total volume of a metric.</para></li><li><para><c>Average</c> - The value of <c>Sum</c> / <c>SampleCount</c> during the specified
            period. By comparing this statistic with the <c>Minimum</c> and <c>Maximum</c> values,
            you can determine the full scope of a metric and how close the average use is to the
            <c>Minimum</c> and <c>Maximum</c> values. This comparison helps you to know when to
            increase or decrease your resources.</para></li><li><para><c>SampleCount</c> - The count, or number, of data points used for the statistical
            calculation.</para></li></ul>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSBucketMetricDataCmdlet.Unit">
            <summary>
            <para>
            <para>The unit for the metric data request.</para><para>Valid units depend on the metric data being requested. For the valid units with each
            available metric, see the <c>metricName</c> parameter.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSBucketMetricDataCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is '*'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.GetBucketMetricDataResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.GetBucketMetricDataResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSBucketMetricDataCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the BucketName parameter.
            The -PassThru parameter is deprecated, use -Select '^BucketName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.GetLSBundleListCmdlet">
            <summary>
            Returns the bundles that you can apply to an Amazon Lightsail instance when you create
            it.
             
              
            <para>
            A bundle describes the specifications of an instance, such as the monthly cost, amount
            of memory, the number of vCPUs, amount of storage space, and monthly network data
            transfer quota.
            </para><note><para>
            Bundles are referred to as <i>instance plans</i> in the Lightsail console.
            </para></note><br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSBundleListCmdlet.AppCategory">
            <summary>
            <para>
            <para>Returns a list of bundles that are specific to Lightsail for Research.</para><important><para>You must use this parameter to view Lightsail for Research bundles.</para></important>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSBundleListCmdlet.IncludeInactive">
            <summary>
            <para>
            <para>A Boolean value that indicates whether to include inactive (unavailable) bundles in
            the response of your request.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSBundleListCmdlet.PageToken">
            <summary>
            <para>
            <para>The token to advance to the next page of results from your request.</para><para>To get a page token, perform an initial <c>GetBundles</c> request. If your results
            are paginated, the response will return a next page token that you can specify as
            the page token in a subsequent request.</para>
            </para>
            <para>
            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.
            <br/>In order to manually control output pagination, use '-PageToken $null' for the first call and '-PageToken $AWSHistory.LastServiceResponse.NextPageToken' for subsequent calls.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSBundleListCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Bundles'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.GetBundlesResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.GetBundlesResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSBundleListCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the IncludeInactive parameter.
            The -PassThru parameter is deprecated, use -Select '^IncludeInactive' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSBundleListCmdlet.NoAutoIteration">
            <summary>
            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple
            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of PageToken
            as the start point.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.GetLSCertificateCmdlet">
            <summary>
            Returns information about one or more Amazon Lightsail SSL/TLS certificates.
             
             <note><para>
            To get a summary of a certificate, omit <c>includeCertificateDetails</c> from your
            request. The response will include only the certificate Amazon Resource Name (ARN),
            certificate name, domain name, and tags.
            </para></note><br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSCertificateCmdlet.CertificateName">
            <summary>
            <para>
            <para>The name for the certificate for which to return information.</para><para>When omitted, the response includes all of your certificates in the Amazon Web Services
            Region where the request is made.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSCertificateCmdlet.CertificateStatus">
            <summary>
            <para>
            <para>The status of the certificates for which to return information.</para><para>For example, specify <c>ISSUED</c> to return only certificates with an <c>ISSUED</c>
            status.</para><para>When omitted, the response includes all of your certificates in the Amazon Web Services
            Region where the request is made, regardless of their current status.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSCertificateCmdlet.IncludeCertificateDetail">
            <summary>
            <para>
            <para>Indicates whether to include detailed information about the certificates in the response.</para><para>When omitted, the response includes only the certificate names, Amazon Resource Names
            (ARNs), domain names, and tags.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSCertificateCmdlet.PageToken">
            <summary>
            <para>
            <para>The token to advance to the next page of results from your request.</para><para>To get a page token, perform an initial <c>GetCertificates</c> request. If your results
            are paginated, the response will return a next page token that you can specify as
            the page token in a subsequent request.</para>
            </para>
            <para>
            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.
            <br/>In order to manually control output pagination, use '-PageToken $null' for the first call and '-PageToken $AWSHistory.LastServiceResponse.NextPageToken' for subsequent calls.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSCertificateCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Certificates'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.GetCertificatesResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.GetCertificatesResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSCertificateCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the CertificateName parameter.
            The -PassThru parameter is deprecated, use -Select '^CertificateName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSCertificateCmdlet.NoAutoIteration">
            <summary>
            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple
            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of PageToken
            as the start point.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.GetLSCloudFormationStackRecordCmdlet">
            <summary>
            Returns the CloudFormation stack record created as a result of the <c>create cloud
            formation stack</c> operation.
             
              
            <para>
            An AWS CloudFormation stack is used to create a new Amazon EC2 instance from an exported
            Lightsail snapshot.
            </para><br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSCloudFormationStackRecordCmdlet.PageToken">
            <summary>
            <para>
            <para>The token to advance to the next page of results from your request.</para><para>To get a page token, perform an initial <c>GetClouFormationStackRecords</c> request.
            If your results are paginated, the response will return a next page token that you
            can specify as the page token in a subsequent request.</para>
            </para>
            <para>
            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.
            <br/>In order to manually control output pagination, use '-PageToken $null' for the first call and '-PageToken $AWSHistory.LastServiceResponse.NextPageToken' for subsequent calls.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSCloudFormationStackRecordCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'CloudFormationStackRecords'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.GetCloudFormationStackRecordsResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.GetCloudFormationStackRecordsResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSCloudFormationStackRecordCmdlet.NoAutoIteration">
            <summary>
            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple
            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of PageToken
            as the start point.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.GetLSContactMethodCmdlet">
            <summary>
            Returns information about the configured contact methods. Specify a protocol in your
            request to return information about a specific contact method.
             
              
            <para>
            A contact method is used to send you notifications about your Amazon Lightsail resources.
            You can add one email address and one mobile phone number contact method in each Amazon
            Web Services Region. However, SMS text messaging is not supported in some Amazon Web
            Services Regions, and SMS text messages cannot be sent to some countries/regions.
            For more information, see <a href="https://lightsail.aws.amazon.com/ls/docs/en_us/articles/amazon-lightsail-notifications">Notifications
            in Amazon Lightsail</a>.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSContactMethodCmdlet.Protocol">
            <summary>
            <para>
            <para>The protocols used to send notifications, such as <c>Email</c>, or <c>SMS</c> (text
            messaging).</para><para>Specify a protocol in your request to return information about a specific contact
            method protocol.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSContactMethodCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'ContactMethods'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.GetContactMethodsResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.GetContactMethodsResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.GetLSContainerAPIMetadataCmdlet">
            <summary>
            Returns information about Amazon Lightsail containers, such as the current version
            of the Lightsail Control (lightsailctl) plugin.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSContainerAPIMetadataCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Metadata'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.GetContainerAPIMetadataResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.GetContainerAPIMetadataResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.GetLSContainerImageCmdlet">
            <summary>
            Returns the container images that are registered to your Amazon Lightsail container
            service.
             
             <note><para>
            If you created a deployment on your Lightsail container service that uses container
            images from a public registry like Docker Hub, those images are not returned as part
            of this action. Those images are not registered to your Lightsail container service.
            </para></note>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSContainerImageCmdlet.ServiceName">
            <summary>
            <para>
            <para>The name of the container service for which to return registered container images.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSContainerImageCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'ContainerImages'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.GetContainerImagesResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.GetContainerImagesResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSContainerImageCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the ServiceName parameter.
            The -PassThru parameter is deprecated, use -Select '^ServiceName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.GetLSContainerLogCmdlet">
            <summary>
            Returns the log events of a container of your Amazon Lightsail container service.
             
              
            <para>
            If your container service has more than one node (i.e., a scale greater than 1), then
            the log events that are returned for the specified container are merged from all nodes
            on your container service.
            </para><note><para>
            Container logs are retained for a certain amount of time. For more information, see
            <a href="https://docs.aws.amazon.com/general/latest/gr/lightsail.html">Amazon Lightsail
            endpoints and quotas</a> in the <i>Amazon Web Services General Reference</i>.
            </para></note><br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSContainerLogCmdlet.ContainerName">
            <summary>
            <para>
            <para>The name of the container that is either running or previously ran on the container
            service for which to return a log.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSContainerLogCmdlet.EndTime">
            <summary>
            <para>
            <para>The end of the time interval for which to get log data.</para><para>Constraints:</para><ul><li><para>Specified in Coordinated Universal Time (UTC).</para></li><li><para>Specified in the Unix time format.</para><para>For example, if you wish to use an end time of October 1, 2018, at 9 PM UTC, specify
            <c>1538427600</c> as the end time.</para></li></ul><para>You can convert a human-friendly time to Unix time format using a converter like <a href="https://www.epochconverter.com/">Epoch converter</a>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSContainerLogCmdlet.FilterPattern">
            <summary>
            <para>
            <para>The pattern to use to filter the returned log events to a specific term.</para><para>The following are a few examples of filter patterns that you can specify:</para><ul><li><para>To return all log events, specify a filter pattern of <c>""</c>.</para></li><li><para>To exclude log events that contain the <c>ERROR</c> term, and return all other log
            events, specify a filter pattern of <c>"-ERROR"</c>.</para></li><li><para>To return log events that contain the <c>ERROR</c> term, specify a filter pattern
            of <c>"ERROR"</c>.</para></li><li><para>To return log events that contain both the <c>ERROR</c> and <c>Exception</c> terms,
            specify a filter pattern of <c>"ERROR Exception"</c>.</para></li><li><para>To return log events that contain the <c>ERROR</c><i>or</i> the <c>Exception</c>
            term, specify a filter pattern of <c>"?ERROR ?Exception"</c>.</para></li></ul>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSContainerLogCmdlet.ServiceName">
            <summary>
            <para>
            <para>The name of the container service for which to get a container log.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSContainerLogCmdlet.StartTime">
            <summary>
            <para>
            <para>The start of the time interval for which to get log data.</para><para>Constraints:</para><ul><li><para>Specified in Coordinated Universal Time (UTC).</para></li><li><para>Specified in the Unix time format.</para><para>For example, if you wish to use a start time of October 1, 2018, at 8 PM UTC, specify
            <c>1538424000</c> as the start time.</para></li></ul><para>You can convert a human-friendly time to Unix time format using a converter like <a href="https://www.epochconverter.com/">Epoch converter</a>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSContainerLogCmdlet.PageToken">
            <summary>
            <para>
            <para>The token to advance to the next page of results from your request.</para><para>To get a page token, perform an initial <c>GetContainerLog</c> request. If your results
            are paginated, the response will return a next page token that you can specify as
            the page token in a subsequent request.</para>
            </para>
            <para>
            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.
            <br/>In order to manually control output pagination, use '-PageToken $null' for the first call and '-PageToken $AWSHistory.LastServiceResponse.NextPageToken' for subsequent calls.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSContainerLogCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'LogEvents'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.GetContainerLogResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.GetContainerLogResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSContainerLogCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the ServiceName parameter.
            The -PassThru parameter is deprecated, use -Select '^ServiceName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSContainerLogCmdlet.NoAutoIteration">
            <summary>
            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple
            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of PageToken
            as the start point.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.GetLSContainerServiceCmdlet">
            <summary>
            Returns information about one or more of your Amazon Lightsail container services.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSContainerServiceCmdlet.ServiceName">
            <summary>
            <para>
            <para>The name of the container service for which to return information.</para><para>When omitted, the response includes all of your container services in the Amazon Web
            Services Region where the request is made.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSContainerServiceCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'ContainerServices'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.GetContainerServicesResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.GetContainerServicesResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSContainerServiceCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the ServiceName parameter.
            The -PassThru parameter is deprecated, use -Select '^ServiceName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.GetLSContainerServiceDeploymentCmdlet">
            <summary>
            Returns the deployments for your Amazon Lightsail container service
             
              
            <para>
            A deployment specifies the settings, such as the ports and launch command, of containers
            that are deployed to your container service.
            </para><para>
            The deployments are ordered by version in ascending order. The newest version is listed
            at the top of the response.
            </para><note><para>
            A set number of deployments are kept before the oldest one is replaced with the newest
            one. For more information, see <a href="https://docs.aws.amazon.com/general/latest/gr/lightsail.html">Amazon
            Lightsail endpoints and quotas</a> in the <i>Amazon Web Services General Reference</i>.
            </para></note>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSContainerServiceDeploymentCmdlet.ServiceName">
            <summary>
            <para>
            <para>The name of the container service for which to return deployments.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSContainerServiceDeploymentCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Deployments'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.GetContainerServiceDeploymentsResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.GetContainerServiceDeploymentsResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSContainerServiceDeploymentCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the ServiceName parameter.
            The -PassThru parameter is deprecated, use -Select '^ServiceName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.GetLSContainerServiceMetricDataCmdlet">
            <summary>
            Returns the data points of a specific metric of your Amazon Lightsail container service.
             
              
            <para>
            Metrics report the utilization of your resources. Monitor and collect metric data
            regularly to maintain the reliability, availability, and performance of your resources.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSContainerServiceMetricDataCmdlet.EndTime">
            <summary>
            <para>
            <para>The end time of the time period.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSContainerServiceMetricDataCmdlet.MetricName">
            <summary>
            <para>
            <para>The metric for which you want to return information.</para><para>Valid container service metric names are listed below, along with the most useful
            statistics to include in your request, and the published unit value.</para><ul><li><para><c>CPUUtilization</c> - The average percentage of compute units that are currently
            in use across all nodes of the container service. This metric identifies the processing
            power required to run containers on each node of the container service.</para><para>Statistics: The most useful statistics are <c>Maximum</c> and <c>Average</c>.</para><para>Unit: The published unit is <c>Percent</c>.</para></li><li><para><c>MemoryUtilization</c> - The average percentage of available memory that is currently
            in use across all nodes of the container service. This metric identifies the memory
            required to run containers on each node of the container service.</para><para>Statistics: The most useful statistics are <c>Maximum</c> and <c>Average</c>.</para><para>Unit: The published unit is <c>Percent</c>.</para></li></ul>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSContainerServiceMetricDataCmdlet.Period">
            <summary>
            <para>
            <para>The granularity, in seconds, of the returned data points.</para><para>All container service metric data is available in 5-minute (300 seconds) granularity.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSContainerServiceMetricDataCmdlet.ServiceName">
            <summary>
            <para>
            <para>The name of the container service for which to get metric data.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSContainerServiceMetricDataCmdlet.StartTime">
            <summary>
            <para>
            <para>The start time of the time period.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSContainerServiceMetricDataCmdlet.Statistic">
            <summary>
            <para>
            <para>The statistic for the metric.</para><para>The following statistics are available:</para><ul><li><para><c>Minimum</c> - The lowest value observed during the specified period. Use this
            value to determine low volumes of activity for your application.</para></li><li><para><c>Maximum</c> - The highest value observed during the specified period. Use this
            value to determine high volumes of activity for your application.</para></li><li><para><c>Sum</c> - All values submitted for the matching metric added together. You can
            use this statistic to determine the total volume of a metric.</para></li><li><para><c>Average</c> - The value of <c>Sum</c> / <c>SampleCount</c> during the specified
            period. By comparing this statistic with the <c>Minimum</c> and <c>Maximum</c> values,
            you can determine the full scope of a metric and how close the average use is to the
            <c>Minimum</c> and <c>Maximum</c> values. This comparison helps you to know when to
            increase or decrease your resources.</para></li><li><para><c>SampleCount</c> - The count, or number, of data points used for the statistical
            calculation.</para></li></ul>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSContainerServiceMetricDataCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is '*'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.GetContainerServiceMetricDataResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.GetContainerServiceMetricDataResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSContainerServiceMetricDataCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the ServiceName parameter.
            The -PassThru parameter is deprecated, use -Select '^ServiceName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.GetLSContainerServicePowerCmdlet">
            <summary>
            Returns the list of powers that can be specified for your Amazon Lightsail container
            services.
             
              
            <para>
            The power specifies the amount of memory, the number of vCPUs, and the base price
            of the container service.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSContainerServicePowerCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Powers'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.GetContainerServicePowersResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.GetContainerServicePowersResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.GetLSCostEstimateCmdlet">
            <summary>
            Retrieves information about the cost estimate for a specified resource. A cost estimate
            will not generate for a resource that has been deleted.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSCostEstimateCmdlet.EndTime">
            <summary>
            <para>
            <para>The cost estimate end time.</para><para>Constraints:</para><ul><li><para>Specified in Coordinated Universal Time (UTC).</para></li><li><para>Specified in the Unix time format.</para><para>For example, if you want to use an end time of October 1, 2018, at 9 PM UTC, specify
            <c>1538427600</c> as the end time.</para></li></ul><para>You can convert a human-friendly time to Unix time format using a converter like <a href="https://www.epochconverter.com/">Epoch converter</a>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSCostEstimateCmdlet.ResourceName">
            <summary>
            <para>
            <para>The resource name.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSCostEstimateCmdlet.StartTime">
            <summary>
            <para>
            <para>The cost estimate start time.</para><para>Constraints:</para><ul><li><para>Specified in Coordinated Universal Time (UTC).</para></li><li><para>Specified in the Unix time format.</para><para>For example, if you want to use a start time of October 1, 2018, at 8 PM UTC, specify
            <c>1538424000</c> as the start time.</para></li></ul><para>You can convert a human-friendly time to Unix time format using a converter like <a href="https://www.epochconverter.com/">Epoch converter</a>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSCostEstimateCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'ResourcesBudgetEstimate'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.GetCostEstimateResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.GetCostEstimateResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSCostEstimateCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the ResourceName parameter.
            The -PassThru parameter is deprecated, use -Select '^ResourceName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.GetLSDiskCmdlet">
            <summary>
            Returns information about a specific block storage disk.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSDiskCmdlet.DiskName">
            <summary>
            <para>
            <para>The name of the disk (<c>my-disk</c>).</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSDiskCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Disk'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.GetDiskResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.GetDiskResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSDiskCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the DiskName parameter.
            The -PassThru parameter is deprecated, use -Select '^DiskName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.GetLSDiskListCmdlet">
            <summary>
            Returns information about all block storage disks in your AWS account and region.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSDiskListCmdlet.PageToken">
            <summary>
            <para>
            <para>The token to advance to the next page of results from your request.</para><para>To get a page token, perform an initial <c>GetDisks</c> request. If your results are
            paginated, the response will return a next page token that you can specify as the
            page token in a subsequent request.</para>
            </para>
            <para>
            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.
            <br/>In order to manually control output pagination, use '-PageToken $null' for the first call and '-PageToken $AWSHistory.LastServiceResponse.NextPageToken' for subsequent calls.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSDiskListCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Disks'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.GetDisksResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.GetDisksResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSDiskListCmdlet.NoAutoIteration">
            <summary>
            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple
            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of PageToken
            as the start point.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.GetLSDiskSnapshotCmdlet">
            <summary>
            Returns information about a specific block storage disk snapshot.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSDiskSnapshotCmdlet.DiskSnapshotName">
            <summary>
            <para>
            <para>The name of the disk snapshot (<c>my-disk-snapshot</c>).</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSDiskSnapshotCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'DiskSnapshot'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.GetDiskSnapshotResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.GetDiskSnapshotResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSDiskSnapshotCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the DiskSnapshotName parameter.
            The -PassThru parameter is deprecated, use -Select '^DiskSnapshotName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.GetLSDiskSnapshotListCmdlet">
            <summary>
            Returns information about all block storage disk snapshots in your AWS account and
            region.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSDiskSnapshotListCmdlet.PageToken">
            <summary>
            <para>
            <para>The token to advance to the next page of results from your request.</para><para>To get a page token, perform an initial <c>GetDiskSnapshots</c> request. If your results
            are paginated, the response will return a next page token that you can specify as
            the page token in a subsequent request.</para>
            </para>
            <para>
            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.
            <br/>In order to manually control output pagination, use '-PageToken $null' for the first call and '-PageToken $AWSHistory.LastServiceResponse.NextPageToken' for subsequent calls.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSDiskSnapshotListCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'DiskSnapshots'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.GetDiskSnapshotsResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.GetDiskSnapshotsResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSDiskSnapshotListCmdlet.NoAutoIteration">
            <summary>
            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple
            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of PageToken
            as the start point.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.GetLSDistributionCmdlet">
            <summary>
            Returns information about one or more of your Amazon Lightsail content delivery network
            (CDN) distributions.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSDistributionCmdlet.DistributionName">
            <summary>
            <para>
            <para>The name of the distribution for which to return information.</para><para>When omitted, the response includes all of your distributions in the Amazon Web Services
            Region where the request is made.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSDistributionCmdlet.PageToken">
            <summary>
            <para>
            <para>The token to advance to the next page of results from your request.</para><para>To get a page token, perform an initial <c>GetDistributions</c> request. If your results
            are paginated, the response will return a next page token that you can specify as
            the page token in a subsequent request.</para>
            </para>
            <para>
            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.
            <br/>In order to manually control output pagination, use '-PageToken $null' for the first call and '-PageToken $AWSHistory.LastServiceResponse.NextPageToken' for subsequent calls.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSDistributionCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Distributions'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.GetDistributionsResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.GetDistributionsResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSDistributionCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the DistributionName parameter.
            The -PassThru parameter is deprecated, use -Select '^DistributionName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSDistributionCmdlet.NoAutoIteration">
            <summary>
            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple
            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of PageToken
            as the start point.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.GetLSDistributionBundleCmdlet">
            <summary>
            Returns the bundles that can be applied to your Amazon Lightsail content delivery
            network (CDN) distributions.
             
              
            <para>
            A distribution bundle specifies the monthly network transfer quota and monthly cost
            of your distribution.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSDistributionBundleCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Bundles'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.GetDistributionBundlesResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.GetDistributionBundlesResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.GetLSDistributionLatestCacheResetCmdlet">
            <summary>
            Returns the timestamp and status of the last cache reset of a specific Amazon Lightsail
            content delivery network (CDN) distribution.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSDistributionLatestCacheResetCmdlet.DistributionName">
            <summary>
            <para>
            <para>The name of the distribution for which to return the timestamp of the last cache reset.</para><para>Use the <c>GetDistributions</c> action to get a list of distribution names that you
            can specify.</para><para>When omitted, the response includes the latest cache reset timestamp of all your distributions.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSDistributionLatestCacheResetCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is '*'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.GetDistributionLatestCacheResetResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.GetDistributionLatestCacheResetResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSDistributionLatestCacheResetCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the DistributionName parameter.
            The -PassThru parameter is deprecated, use -Select '^DistributionName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.GetLSDistributionMetricDataCmdlet">
            <summary>
            Returns the data points of a specific metric for an Amazon Lightsail content delivery
            network (CDN) distribution.
             
              
            <para>
            Metrics report the utilization of your resources, and the error counts generated by
            them. Monitor and collect metric data regularly to maintain the reliability, availability,
            and performance of your resources.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSDistributionMetricDataCmdlet.DistributionName">
            <summary>
            <para>
            <para>The name of the distribution for which to get metric data.</para><para>Use the <c>GetDistributions</c> action to get a list of distribution names that you
            can specify.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSDistributionMetricDataCmdlet.EndTime">
            <summary>
            <para>
            <para>The end of the time interval for which to get metric data.</para><para>Constraints:</para><ul><li><para>Specified in Coordinated Universal Time (UTC).</para></li><li><para>Specified in the Unix time format.</para><para>For example, if you wish to use an end time of October 1, 2018, at 9 PM UTC, specify
            <c>1538427600</c> as the end time.</para></li></ul><para>You can convert a human-friendly time to Unix time format using a converter like <a href="https://www.epochconverter.com/">Epoch converter</a>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSDistributionMetricDataCmdlet.MetricName">
            <summary>
            <para>
            <para>The metric for which you want to return information.</para><para>Valid distribution metric names are listed below, along with the most useful <c>statistics</c>
            to include in your request, and the published <c>unit</c> value.</para><ul><li><para><b><c>Requests</c></b> - The total number of viewer requests received by your Lightsail
            distribution, for all HTTP methods, and for both HTTP and HTTPS requests.</para><para><c>Statistics</c>: The most useful statistic is <c>Sum</c>.</para><para><c>Unit</c>: The published unit is <c>None</c>.</para></li><li><para><b><c>BytesDownloaded</c></b> - The number of bytes downloaded by viewers for GET,
            HEAD, and OPTIONS requests.</para><para><c>Statistics</c>: The most useful statistic is <c>Sum</c>.</para><para><c>Unit</c>: The published unit is <c>None</c>.</para></li><li><para><b><c>BytesUploaded </c></b> - The number of bytes uploaded to your origin by your
            Lightsail distribution, using POST and PUT requests.</para><para><c>Statistics</c>: The most useful statistic is <c>Sum</c>.</para><para><c>Unit</c>: The published unit is <c>None</c>.</para></li><li><para><b><c>TotalErrorRate</c></b> - The percentage of all viewer requests for which
            the response's HTTP status code was 4xx or 5xx.</para><para><c>Statistics</c>: The most useful statistic is <c>Average</c>.</para><para><c>Unit</c>: The published unit is <c>Percent</c>.</para></li><li><para><b><c>4xxErrorRate</c></b> - The percentage of all viewer requests for which the
            response's HTTP status cod was 4xx. In these cases, the client or client viewer may
            have made an error. For example, a status code of 404 (Not Found) means that the client
            requested an object that could not be found.</para><para><c>Statistics</c>: The most useful statistic is <c>Average</c>.</para><para><c>Unit</c>: The published unit is <c>Percent</c>.</para></li><li><para><b><c>5xxErrorRate</c></b> - The percentage of all viewer requests for which the
            response's HTTP status code was 5xx. In these cases, the origin server did not satisfy
            the requests. For example, a status code of 503 (Service Unavailable) means that the
            origin server is currently unavailable.</para><para><c>Statistics</c>: The most useful statistic is <c>Average</c>.</para><para><c>Unit</c>: The published unit is <c>Percent</c>.</para></li></ul>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSDistributionMetricDataCmdlet.Period">
            <summary>
            <para>
            <para>The granularity, in seconds, for the metric data points that will be returned.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSDistributionMetricDataCmdlet.StartTime">
            <summary>
            <para>
            <para>The start of the time interval for which to get metric data.</para><para>Constraints:</para><ul><li><para>Specified in Coordinated Universal Time (UTC).</para></li><li><para>Specified in the Unix time format.</para><para>For example, if you wish to use a start time of October 1, 2018, at 8 PM UTC, specify
            <c>1538424000</c> as the start time.</para></li></ul><para>You can convert a human-friendly time to Unix time format using a converter like <a href="https://www.epochconverter.com/">Epoch converter</a>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSDistributionMetricDataCmdlet.Statistic">
            <summary>
            <para>
            <para>The statistic for the metric.</para><para>The following statistics are available:</para><ul><li><para><c>Minimum</c> - The lowest value observed during the specified period. Use this
            value to determine low volumes of activity for your application.</para></li><li><para><c>Maximum</c> - The highest value observed during the specified period. Use this
            value to determine high volumes of activity for your application.</para></li><li><para><c>Sum</c> - All values submitted for the matching metric added together. You can
            use this statistic to determine the total volume of a metric.</para></li><li><para><c>Average</c> - The value of Sum / SampleCount during the specified period. By comparing
            this statistic with the Minimum and Maximum values, you can determine the full scope
            of a metric and how close the average use is to the Minimum and Maximum values. This
            comparison helps you to know when to increase or decrease your resources.</para></li><li><para><c>SampleCount</c> - The count, or number, of data points used for the statistical
            calculation.</para></li></ul>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSDistributionMetricDataCmdlet.Unit">
            <summary>
            <para>
            <para>The unit for the metric data request.</para><para>Valid units depend on the metric data being requested. For the valid units with each
            available metric, see the <c>metricName</c> parameter.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSDistributionMetricDataCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is '*'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.GetDistributionMetricDataResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.GetDistributionMetricDataResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSDistributionMetricDataCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the DistributionName parameter.
            The -PassThru parameter is deprecated, use -Select '^DistributionName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.GetLSDomainCmdlet">
            <summary>
            Returns information about a specific domain recordset.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSDomainCmdlet.DomainName">
            <summary>
            <para>
            <para>The domain name for which your want to return information about.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSDomainCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Domain'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.GetDomainResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.GetDomainResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSDomainCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the DomainName parameter.
            The -PassThru parameter is deprecated, use -Select '^DomainName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.GetLSDomainListCmdlet">
            <summary>
            Returns a list of all domains in the user's account.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSDomainListCmdlet.PageToken">
            <summary>
            <para>
            <para>The token to advance to the next page of results from your request.</para><para>To get a page token, perform an initial <c>GetDomains</c> request. If your results
            are paginated, the response will return a next page token that you can specify as
            the page token in a subsequent request.</para>
            </para>
            <para>
            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.
            <br/>In order to manually control output pagination, use '-PageToken $null' for the first call and '-PageToken $AWSHistory.LastServiceResponse.NextPageToken' for subsequent calls.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSDomainListCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Domains'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.GetDomainsResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.GetDomainsResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSDomainListCmdlet.NoAutoIteration">
            <summary>
            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple
            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of PageToken
            as the start point.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.GetLSExportSnapshotRecordCmdlet">
            <summary>
            Returns all export snapshot records created as a result of the <c>export snapshot</c>
            operation.
             
              
            <para>
            An export snapshot record can be used to create a new Amazon EC2 instance and its
            related resources with the <a href="https://docs.aws.amazon.com/lightsail/2016-11-28/api-reference/API_CreateCloudFormationStack.html">CreateCloudFormationStack</a>
            action.
            </para><br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSExportSnapshotRecordCmdlet.PageToken">
            <summary>
            <para>
            <para>The token to advance to the next page of results from your request.</para><para>To get a page token, perform an initial <c>GetExportSnapshotRecords</c> request. If
            your results are paginated, the response will return a next page token that you can
            specify as the page token in a subsequent request.</para>
            </para>
            <para>
            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.
            <br/>In order to manually control output pagination, use '-PageToken $null' for the first call and '-PageToken $AWSHistory.LastServiceResponse.NextPageToken' for subsequent calls.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSExportSnapshotRecordCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'ExportSnapshotRecords'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.GetExportSnapshotRecordsResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.GetExportSnapshotRecordsResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSExportSnapshotRecordCmdlet.NoAutoIteration">
            <summary>
            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple
            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of PageToken
            as the start point.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.GetLSInstanceCmdlet">
            <summary>
            Returns information about a specific Amazon Lightsail instance, which is a virtual
            private server.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSInstanceCmdlet.InstanceName">
            <summary>
            <para>
            <para>The name of the instance.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSInstanceCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Instance'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.GetInstanceResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.GetInstanceResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSInstanceCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the InstanceName parameter.
            The -PassThru parameter is deprecated, use -Select '^InstanceName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.GetLSInstanceAccessDetailCmdlet">
            <summary>
            Returns temporary SSH keys you can use to connect to a specific virtual private server,
            or <i>instance</i>.
             
              
            <para>
            The <c>get instance access details</c> operation supports tag-based access control
            via resource tags applied to the resource identified by <c>instance name</c>. For
            more information, see the <a href="https://lightsail.aws.amazon.com/ls/docs/en_us/articles/amazon-lightsail-controlling-access-using-tags">Amazon
            Lightsail Developer Guide</a>.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSInstanceAccessDetailCmdlet.InstanceName">
            <summary>
            <para>
            <para>The name of the instance to access.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSInstanceAccessDetailCmdlet.Protocol">
            <summary>
            <para>
            <para>The protocol to use to connect to your instance. Defaults to <c>ssh</c>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSInstanceAccessDetailCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'AccessDetails'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.GetInstanceAccessDetailsResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.GetInstanceAccessDetailsResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSInstanceAccessDetailCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the InstanceName parameter.
            The -PassThru parameter is deprecated, use -Select '^InstanceName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.GetLSInstanceListCmdlet">
            <summary>
            Returns information about all Amazon Lightsail virtual private servers, or <i>instances</i>.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSInstanceListCmdlet.PageToken">
            <summary>
            <para>
            <para>The token to advance to the next page of results from your request.</para><para>To get a page token, perform an initial <c>GetInstances</c> request. If your results
            are paginated, the response will return a next page token that you can specify as
            the page token in a subsequent request.</para>
            </para>
            <para>
            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.
            <br/>In order to manually control output pagination, use '-PageToken $null' for the first call and '-PageToken $AWSHistory.LastServiceResponse.NextPageToken' for subsequent calls.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSInstanceListCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Instances'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.GetInstancesResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.GetInstancesResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSInstanceListCmdlet.NoAutoIteration">
            <summary>
            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple
            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of PageToken
            as the start point.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.GetLSInstanceMetricDataCmdlet">
            <summary>
            Returns the data points for the specified Amazon Lightsail instance metric, given
            an instance name.
             
              
            <para>
            Metrics report the utilization of your resources, and the error counts generated by
            them. Monitor and collect metric data regularly to maintain the reliability, availability,
            and performance of your resources.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSInstanceMetricDataCmdlet.EndTime">
            <summary>
            <para>
            <para>The end time of the time period.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSInstanceMetricDataCmdlet.InstanceName">
            <summary>
            <para>
            <para>The name of the instance for which you want to get metrics data.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSInstanceMetricDataCmdlet.MetricName">
            <summary>
            <para>
            <para>The metric for which you want to return information.</para><para>Valid instance metric names are listed below, along with the most useful <c>statistics</c>
            to include in your request, and the published <c>unit</c> value.</para><ul><li><para><b><c>BurstCapacityPercentage</c></b> - The percentage of CPU performance available
            for your instance to burst above its baseline. Your instance continuously accrues
            and consumes burst capacity. Burst capacity stops accruing when your instance's <c>BurstCapacityPercentage</c>
            reaches 100%. For more information, see <a href="https://lightsail.aws.amazon.com/ls/docs/en_us/articles/amazon-lightsail-viewing-instance-burst-capacity">Viewing
            instance burst capacity in Amazon Lightsail</a>.</para><para><c>Statistics</c>: The most useful statistics are <c>Maximum</c> and <c>Average</c>.</para><para><c>Unit</c>: The published unit is <c>Percent</c>.</para></li><li><para><b><c>BurstCapacityTime</c></b> - The available amount of time for your instance
            to burst at 100% CPU utilization. Your instance continuously accrues and consumes
            burst capacity. Burst capacity time stops accruing when your instance's <c>BurstCapacityPercentage</c>
            metric reaches 100%.</para><para>Burst capacity time is consumed at the full rate only when your instance operates
            at 100% CPU utilization. For example, if your instance operates at 50% CPU utilization
            in the burstable zone for a 5-minute period, then it consumes CPU burst capacity minutes
            at a 50% rate in that period. Your instance consumed 2 minutes and 30 seconds of CPU
            burst capacity minutes in the 5-minute period. For more information, see <a href="https://lightsail.aws.amazon.com/ls/docs/en_us/articles/amazon-lightsail-viewing-instance-burst-capacity">Viewing
            instance burst capacity in Amazon Lightsail</a>.</para><para><c>Statistics</c>: The most useful statistics are <c>Maximum</c> and <c>Average</c>.</para><para><c>Unit</c>: The published unit is <c>Seconds</c>.</para></li><li><para><b><c>CPUUtilization</c></b> - The percentage of allocated compute units that are
            currently in use on the instance. This metric identifies the processing power to run
            the applications on the instance. Tools in your operating system can show a lower
            percentage than Lightsail when the instance is not allocated a full processor core.</para><para><c>Statistics</c>: The most useful statistics are <c>Maximum</c> and <c>Average</c>.</para><para><c>Unit</c>: The published unit is <c>Percent</c>.</para></li><li><para><b><c>NetworkIn</c></b> - The number of bytes received on all network interfaces
            by the instance. This metric identifies the volume of incoming network traffic to
            the instance. The number reported is the number of bytes received during the period.
            Because this metric is reported in 5-minute intervals, divide the reported number
            by 300 to find Bytes/second.</para><para><c>Statistics</c>: The most useful statistic is <c>Sum</c>.</para><para><c>Unit</c>: The published unit is <c>Bytes</c>.</para></li><li><para><b><c>NetworkOut</c></b> - The number of bytes sent out on all network interfaces
            by the instance. This metric identifies the volume of outgoing network traffic from
            the instance. The number reported is the number of bytes sent during the period. Because
            this metric is reported in 5-minute intervals, divide the reported number by 300 to
            find Bytes/second.</para><para><c>Statistics</c>: The most useful statistic is <c>Sum</c>.</para><para><c>Unit</c>: The published unit is <c>Bytes</c>.</para></li><li><para><b><c>StatusCheckFailed</c></b> - Reports whether the instance passed or failed
            both the instance status check and the system status check. This metric can be either
            0 (passed) or 1 (failed). This metric data is available in 1-minute (60 seconds) granularity.</para><para><c>Statistics</c>: The most useful statistic is <c>Sum</c>.</para><para><c>Unit</c>: The published unit is <c>Count</c>.</para></li><li><para><b><c>StatusCheckFailed_Instance</c></b> - Reports whether the instance passed
            or failed the instance status check. This metric can be either 0 (passed) or 1 (failed).
            This metric data is available in 1-minute (60 seconds) granularity.</para><para><c>Statistics</c>: The most useful statistic is <c>Sum</c>.</para><para><c>Unit</c>: The published unit is <c>Count</c>.</para></li><li><para><b><c>StatusCheckFailed_System</c></b> - Reports whether the instance passed or
            failed the system status check. This metric can be either 0 (passed) or 1 (failed).
            This metric data is available in 1-minute (60 seconds) granularity.</para><para><c>Statistics</c>: The most useful statistic is <c>Sum</c>.</para><para><c>Unit</c>: The published unit is <c>Count</c>.</para></li><li><para><b><c>MetadataNoToken</c></b> - Reports the number of times that the instance metadata
            service was successfully accessed without a token. This metric determines if there
            are any processes accessing instance metadata by using Instance Metadata Service Version
            1, which doesn't use a token. If all requests use token-backed sessions, such as Instance
            Metadata Service Version 2, then the value is 0.</para><para><c>Statistics</c>: The most useful statistic is <c>Sum</c>.</para><para><c>Unit</c>: The published unit is <c>Count</c>.</para></li></ul>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSInstanceMetricDataCmdlet.Period">
            <summary>
            <para>
            <para>The granularity, in seconds, of the returned data points.</para><para>The <c>StatusCheckFailed</c>, <c>StatusCheckFailed_Instance</c>, and <c>StatusCheckFailed_System</c>
            instance metric data is available in 1-minute (60 seconds) granularity. All other
            instance metric data is available in 5-minute (300 seconds) granularity.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSInstanceMetricDataCmdlet.StartTime">
            <summary>
            <para>
            <para>The start time of the time period.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSInstanceMetricDataCmdlet.Statistic">
            <summary>
            <para>
            <para>The statistic for the metric.</para><para>The following statistics are available:</para><ul><li><para><c>Minimum</c> - The lowest value observed during the specified period. Use this
            value to determine low volumes of activity for your application.</para></li><li><para><c>Maximum</c> - The highest value observed during the specified period. Use this
            value to determine high volumes of activity for your application.</para></li><li><para><c>Sum</c> - All values submitted for the matching metric added together. You can
            use this statistic to determine the total volume of a metric.</para></li><li><para><c>Average</c> - The value of Sum / SampleCount during the specified period. By comparing
            this statistic with the Minimum and Maximum values, you can determine the full scope
            of a metric and how close the average use is to the Minimum and Maximum values. This
            comparison helps you to know when to increase or decrease your resources.</para></li><li><para><c>SampleCount</c> - The count, or number, of data points used for the statistical
            calculation.</para></li></ul>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSInstanceMetricDataCmdlet.Unit">
            <summary>
            <para>
            <para>The unit for the metric data request. Valid units depend on the metric data being
            requested. For the valid units to specify with each available metric, see the <c>metricName</c>
            parameter.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSInstanceMetricDataCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is '*'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.GetInstanceMetricDataResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.GetInstanceMetricDataResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSInstanceMetricDataCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the InstanceName parameter.
            The -PassThru parameter is deprecated, use -Select '^InstanceName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.GetLSInstancePortStateListCmdlet">
            <summary>
            Returns the firewall port states for a specific Amazon Lightsail instance, the IP
            addresses allowed to connect to the instance through the ports, and the protocol.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSInstancePortStateListCmdlet.InstanceName">
            <summary>
            <para>
            <para>The name of the instance for which to return firewall port states.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSInstancePortStateListCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'PortStates'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.GetInstancePortStatesResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.GetInstancePortStatesResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSInstancePortStateListCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the InstanceName parameter.
            The -PassThru parameter is deprecated, use -Select '^InstanceName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.GetLSInstanceSnapshotCmdlet">
            <summary>
            Returns information about a specific instance snapshot.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSInstanceSnapshotCmdlet.InstanceSnapshotName">
            <summary>
            <para>
            <para>The name of the snapshot for which you are requesting information.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSInstanceSnapshotCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'InstanceSnapshot'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.GetInstanceSnapshotResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.GetInstanceSnapshotResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSInstanceSnapshotCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the InstanceSnapshotName parameter.
            The -PassThru parameter is deprecated, use -Select '^InstanceSnapshotName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.GetLSInstanceSnapshotListCmdlet">
            <summary>
            Returns all instance snapshots for the user's account.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSInstanceSnapshotListCmdlet.PageToken">
            <summary>
            <para>
            <para>The token to advance to the next page of results from your request.</para><para>To get a page token, perform an initial <c>GetInstanceSnapshots</c> request. If your
            results are paginated, the response will return a next page token that you can specify
            as the page token in a subsequent request.</para>
            </para>
            <para>
            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.
            <br/>In order to manually control output pagination, use '-PageToken $null' for the first call and '-PageToken $AWSHistory.LastServiceResponse.NextPageToken' for subsequent calls.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSInstanceSnapshotListCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'InstanceSnapshots'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.GetInstanceSnapshotsResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.GetInstanceSnapshotsResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSInstanceSnapshotListCmdlet.NoAutoIteration">
            <summary>
            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple
            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of PageToken
            as the start point.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.GetLSInstanceStateCmdlet">
            <summary>
            Returns the state of a specific instance. Works on one instance at a time.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSInstanceStateCmdlet.InstanceName">
            <summary>
            <para>
            <para>The name of the instance to get state information about.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSInstanceStateCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'State'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.GetInstanceStateResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.GetInstanceStateResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSInstanceStateCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the InstanceName parameter.
            The -PassThru parameter is deprecated, use -Select '^InstanceName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.GetLSKeyPairInfoCmdlet">
            <summary>
            Returns information about a specific key pair.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSKeyPairInfoCmdlet.KeyPairName">
            <summary>
            <para>
            <para>The name of the key pair for which you are requesting information.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSKeyPairInfoCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'KeyPair'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.GetKeyPairResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.GetKeyPairResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSKeyPairInfoCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the KeyPairName parameter.
            The -PassThru parameter is deprecated, use -Select '^KeyPairName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.GetLSKeypairListCmdlet">
            <summary>
            Returns information about all key pairs in the user's account.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSKeypairListCmdlet.IncludeDefaultKeyPair">
            <summary>
            <para>
            <para>A Boolean value that indicates whether to include the default key pair in the response
            of your request.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSKeypairListCmdlet.PageToken">
            <summary>
            <para>
            <para>The token to advance to the next page of results from your request.</para><para>To get a page token, perform an initial <c>GetKeyPairs</c> request. If your results
            are paginated, the response will return a next page token that you can specify as
            the page token in a subsequent request.</para>
            </para>
            <para>
            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.
            <br/>In order to manually control output pagination, use '-PageToken $null' for the first call and '-PageToken $AWSHistory.LastServiceResponse.NextPageToken' for subsequent calls.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSKeypairListCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'KeyPairs'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.GetKeyPairsResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.GetKeyPairsResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSKeypairListCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the IncludeDefaultKeyPair parameter.
            The -PassThru parameter is deprecated, use -Select '^IncludeDefaultKeyPair' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSKeypairListCmdlet.NoAutoIteration">
            <summary>
            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple
            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of PageToken
            as the start point.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.GetLSLoadBalancerCmdlet">
            <summary>
            Returns information about the specified Lightsail load balancer.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSLoadBalancerCmdlet.LoadBalancerName">
            <summary>
            <para>
            <para>The name of the load balancer.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSLoadBalancerCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'LoadBalancer'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.GetLoadBalancerResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.GetLoadBalancerResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSLoadBalancerCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the LoadBalancerName parameter.
            The -PassThru parameter is deprecated, use -Select '^LoadBalancerName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.GetLSLoadBalancerListCmdlet">
            <summary>
            Returns information about all load balancers in an account.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSLoadBalancerListCmdlet.PageToken">
            <summary>
            <para>
            <para>The token to advance to the next page of results from your request.</para><para>To get a page token, perform an initial <c>GetLoadBalancers</c> request. If your results
            are paginated, the response will return a next page token that you can specify as
            the page token in a subsequent request.</para>
            </para>
            <para>
            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.
            <br/>In order to manually control output pagination, use '-PageToken $null' for the first call and '-PageToken $AWSHistory.LastServiceResponse.NextPageToken' for subsequent calls.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSLoadBalancerListCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'LoadBalancers'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.GetLoadBalancersResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.GetLoadBalancersResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSLoadBalancerListCmdlet.NoAutoIteration">
            <summary>
            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple
            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of PageToken
            as the start point.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.GetLSLoadBalancerMetricDataCmdlet">
            <summary>
            Returns information about health metrics for your Lightsail load balancer.
             
              
            <para>
            Metrics report the utilization of your resources, and the error counts generated by
            them. Monitor and collect metric data regularly to maintain the reliability, availability,
            and performance of your resources.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSLoadBalancerMetricDataCmdlet.EndTime">
            <summary>
            <para>
            <para>The end time of the period.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSLoadBalancerMetricDataCmdlet.LoadBalancerName">
            <summary>
            <para>
            <para>The name of the load balancer.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSLoadBalancerMetricDataCmdlet.MetricName">
            <summary>
            <para>
            <para>The metric for which you want to return information.</para><para>Valid load balancer metric names are listed below, along with the most useful <c>statistics</c>
            to include in your request, and the published <c>unit</c> value.</para><ul><li><para><b><c>ClientTLSNegotiationErrorCount</c></b> - The number of TLS connections initiated
            by the client that did not establish a session with the load balancer due to a TLS
            error generated by the load balancer. Possible causes include a mismatch of ciphers
            or protocols.</para><para><c>Statistics</c>: The most useful statistic is <c>Sum</c>.</para><para><c>Unit</c>: The published unit is <c>Count</c>.</para></li><li><para><b><c>HealthyHostCount</c></b> - The number of target instances that are considered
            healthy.</para><para><c>Statistics</c>: The most useful statistic are <c>Average</c>, <c>Minimum</c>,
            and <c>Maximum</c>.</para><para><c>Unit</c>: The published unit is <c>Count</c>.</para></li><li><para><b><c>HTTPCode_Instance_2XX_Count</c></b> - The number of HTTP 2XX response codes
            generated by the target instances. This does not include any response codes generated
            by the load balancer.</para><para><c>Statistics</c>: The most useful statistic is <c>Sum</c>. Note that <c>Minimum</c>,
            <c>Maximum</c>, and <c>Average</c> all return <c>1</c>.</para><para><c>Unit</c>: The published unit is <c>Count</c>.</para></li><li><para><b><c>HTTPCode_Instance_3XX_Count</c></b> - The number of HTTP 3XX response codes
            generated by the target instances. This does not include any response codes generated
            by the load balancer.</para><para><c>Statistics</c>: The most useful statistic is <c>Sum</c>. Note that <c>Minimum</c>,
            <c>Maximum</c>, and <c>Average</c> all return <c>1</c>.</para><para><c>Unit</c>: The published unit is <c>Count</c>.</para></li><li><para><b><c>HTTPCode_Instance_4XX_Count</c></b> - The number of HTTP 4XX response codes
            generated by the target instances. This does not include any response codes generated
            by the load balancer.</para><para><c>Statistics</c>: The most useful statistic is <c>Sum</c>. Note that <c>Minimum</c>,
            <c>Maximum</c>, and <c>Average</c> all return <c>1</c>.</para><para><c>Unit</c>: The published unit is <c>Count</c>.</para></li><li><para><b><c>HTTPCode_Instance_5XX_Count</c></b> - The number of HTTP 5XX response codes
            generated by the target instances. This does not include any response codes generated
            by the load balancer.</para><para><c>Statistics</c>: The most useful statistic is <c>Sum</c>. Note that <c>Minimum</c>,
            <c>Maximum</c>, and <c>Average</c> all return <c>1</c>.</para><para><c>Unit</c>: The published unit is <c>Count</c>.</para></li><li><para><b><c>HTTPCode_LB_4XX_Count</c></b> - The number of HTTP 4XX client error codes
            that originated from the load balancer. Client errors are generated when requests
            are malformed or incomplete. These requests were not received by the target instance.
            This count does not include response codes generated by the target instances.</para><para><c>Statistics</c>: The most useful statistic is <c>Sum</c>. Note that <c>Minimum</c>,
            <c>Maximum</c>, and <c>Average</c> all return <c>1</c>.</para><para><c>Unit</c>: The published unit is <c>Count</c>.</para></li><li><para><b><c>HTTPCode_LB_5XX_Count</c></b> - The number of HTTP 5XX server error codes
            that originated from the load balancer. This does not include any response codes generated
            by the target instance. This metric is reported if there are no healthy instances
            attached to the load balancer, or if the request rate exceeds the capacity of the
            instances (spillover) or the load balancer.</para><para><c>Statistics</c>: The most useful statistic is <c>Sum</c>. Note that <c>Minimum</c>,
            <c>Maximum</c>, and <c>Average</c> all return <c>1</c>.</para><para><c>Unit</c>: The published unit is <c>Count</c>.</para></li><li><para><b><c>InstanceResponseTime</c></b> - The time elapsed, in seconds, after the request
            leaves the load balancer until a response from the target instance is received.</para><para><c>Statistics</c>: The most useful statistic is <c>Average</c>.</para><para><c>Unit</c>: The published unit is <c>Seconds</c>.</para></li><li><para><b><c>RejectedConnectionCount</c></b> - The number of connections that were rejected
            because the load balancer had reached its maximum number of connections.</para><para><c>Statistics</c>: The most useful statistic is <c>Sum</c>.</para><para><c>Unit</c>: The published unit is <c>Count</c>.</para></li><li><para><b><c>RequestCount</c></b> - The number of requests processed over IPv4. This count
            includes only the requests with a response generated by a target instance of the load
            balancer.</para><para><c>Statistics</c>: The most useful statistic is <c>Sum</c>. Note that <c>Minimum</c>,
            <c>Maximum</c>, and <c>Average</c> all return <c>1</c>.</para><para><c>Unit</c>: The published unit is <c>Count</c>.</para></li><li><para><b><c>UnhealthyHostCount</c></b> - The number of target instances that are considered
            unhealthy.</para><para><c>Statistics</c>: The most useful statistic are <c>Average</c>, <c>Minimum</c>,
            and <c>Maximum</c>.</para><para><c>Unit</c>: The published unit is <c>Count</c>.</para></li></ul>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSLoadBalancerMetricDataCmdlet.Period">
            <summary>
            <para>
            <para>The granularity, in seconds, of the returned data points.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSLoadBalancerMetricDataCmdlet.StartTime">
            <summary>
            <para>
            <para>The start time of the period.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSLoadBalancerMetricDataCmdlet.Statistic">
            <summary>
            <para>
            <para>The statistic for the metric.</para><para>The following statistics are available:</para><ul><li><para><c>Minimum</c> - The lowest value observed during the specified period. Use this
            value to determine low volumes of activity for your application.</para></li><li><para><c>Maximum</c> - The highest value observed during the specified period. Use this
            value to determine high volumes of activity for your application.</para></li><li><para><c>Sum</c> - All values submitted for the matching metric added together. You can
            use this statistic to determine the total volume of a metric.</para></li><li><para><c>Average</c> - The value of Sum / SampleCount during the specified period. By comparing
            this statistic with the Minimum and Maximum values, you can determine the full scope
            of a metric and how close the average use is to the Minimum and Maximum values. This
            comparison helps you to know when to increase or decrease your resources.</para></li><li><para><c>SampleCount</c> - The count, or number, of data points used for the statistical
            calculation.</para></li></ul>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSLoadBalancerMetricDataCmdlet.Unit">
            <summary>
            <para>
            <para>The unit for the metric data request. Valid units depend on the metric data being
            requested. For the valid units with each available metric, see the <c>metricName</c>
            parameter.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSLoadBalancerMetricDataCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is '*'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.GetLoadBalancerMetricDataResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.GetLoadBalancerMetricDataResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSLoadBalancerMetricDataCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the LoadBalancerName parameter.
            The -PassThru parameter is deprecated, use -Select '^LoadBalancerName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.GetLSLoadBalancerTlsCertificateCmdlet">
            <summary>
            Returns information about the TLS certificates that are associated with the specified
            Lightsail load balancer.
             
              
            <para>
            TLS is just an updated, more secure version of Secure Socket Layer (SSL).
            </para><para>
            You can have a maximum of 2 certificates associated with a Lightsail load balancer.
            One is active and the other is inactive.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSLoadBalancerTlsCertificateCmdlet.LoadBalancerName">
            <summary>
            <para>
            <para>The name of the load balancer you associated with your SSL/TLS certificate.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSLoadBalancerTlsCertificateCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'TlsCertificates'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.GetLoadBalancerTlsCertificatesResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.GetLoadBalancerTlsCertificatesResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSLoadBalancerTlsCertificateCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the LoadBalancerName parameter.
            The -PassThru parameter is deprecated, use -Select '^LoadBalancerName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.GetLSLoadBalancerTlsPolicyCmdlet">
            <summary>
            Returns a list of TLS security policies that you can apply to Lightsail load balancers.
             
              
            <para>
            For more information about load balancer TLS security policies, see <a href="https://lightsail.aws.amazon.com/ls/docs/en_us/articles/amazon-lightsail-configure-load-balancer-tls-security-policy">Configuring
            TLS security policies on your Amazon Lightsail load balancers</a> in the <i>Amazon
            Lightsail Developer Guide</i>.
            </para><br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSLoadBalancerTlsPolicyCmdlet.PageToken">
            <summary>
            <para>
            <para>The token to advance to the next page of results from your request.</para><para>To get a page token, perform an initial <c>GetLoadBalancerTlsPolicies</c> request.
            If your results are paginated, the response will return a next page token that you
            can specify as the page token in a subsequent request.</para>
            </para>
            <para>
            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.
            <br/>In order to manually control output pagination, use '-PageToken $null' for the first call and '-PageToken $AWSHistory.LastServiceResponse.NextPageToken' for subsequent calls.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSLoadBalancerTlsPolicyCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'TlsPolicies'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.GetLoadBalancerTlsPoliciesResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.GetLoadBalancerTlsPoliciesResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSLoadBalancerTlsPolicyCmdlet.NoAutoIteration">
            <summary>
            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple
            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of PageToken
            as the start point.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.GetLSOperationCmdlet">
            <summary>
            Returns information about a specific operation. Operations include events such as
            when you create an instance, allocate a static IP, attach a static IP, and so on.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSOperationCmdlet.OperationId">
            <summary>
            <para>
            <para>A GUID used to identify the operation.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSOperationCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Operation'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.GetOperationResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.GetOperationResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSOperationCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the OperationId parameter.
            The -PassThru parameter is deprecated, use -Select '^OperationId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.GetLSOperationListCmdlet">
            <summary>
            Returns information about all operations.
             
              
            <para>
            Results are returned from oldest to newest, up to a maximum of 200. Results can be
            paged by making each subsequent call to <c>GetOperations</c> use the maximum (last)
            <c>statusChangedAt</c> value from the previous request.
            </para><br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSOperationListCmdlet.PageToken">
            <summary>
            <para>
            <para>The token to advance to the next page of results from your request.</para><para>To get a page token, perform an initial <c>GetOperations</c> request. If your results
            are paginated, the response will return a next page token that you can specify as
            the page token in a subsequent request.</para>
            </para>
            <para>
            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.
            <br/>In order to manually control output pagination, use '-PageToken $null' for the first call and '-PageToken $AWSHistory.LastServiceResponse.NextPageToken' for subsequent calls.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSOperationListCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Operations'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.GetOperationsResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.GetOperationsResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSOperationListCmdlet.NoAutoIteration">
            <summary>
            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple
            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of PageToken
            as the start point.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.GetLSOperationListForResourceCmdlet">
            <summary>
            Gets operations for a specific resource (an instance or a static IP).<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSOperationListForResourceCmdlet.ResourceName">
            <summary>
            <para>
            <para>The name of the resource for which you are requesting information.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSOperationListForResourceCmdlet.PageToken">
            <summary>
            <para>
            <para>The token to advance to the next page of results from your request.</para><para>To get a page token, perform an initial <c>GetOperationsForResource</c> request. If
            your results are paginated, the response will return a next page token that you can
            specify as the page token in a subsequent request.</para>
            </para>
            <para>
            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.
            <br/>In order to manually control output pagination, use '-PageToken $null' for the first call and '-PageToken $AWSHistory.LastServiceResponse.NextPageToken' for subsequent calls.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSOperationListForResourceCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Operations'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.GetOperationsForResourceResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.GetOperationsForResourceResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSOperationListForResourceCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the ResourceName parameter.
            The -PassThru parameter is deprecated, use -Select '^ResourceName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSOperationListForResourceCmdlet.NoAutoIteration">
            <summary>
            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple
            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of PageToken
            as the start point.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.GetLSRegionListCmdlet">
            <summary>
            Returns a list of all valid regions for Amazon Lightsail. Use the <c>include availability
            zones</c> parameter to also return the Availability Zones in a region.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSRegionListCmdlet.IncludeAvailabilityZone">
            <summary>
            <para>
            <para>A Boolean value indicating whether to also include Availability Zones in your get
            regions request. Availability Zones are indicated with a letter: <c>us-east-2a</c>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSRegionListCmdlet.IncludeRelationalDatabaseAvailabilityZone">
            <summary>
            <para>
            <para>A Boolean value indicating whether to also include Availability Zones for databases
            in your get regions request. Availability Zones are indicated with a letter (<c>us-east-2a</c>).</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSRegionListCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Regions'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.GetRegionsResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.GetRegionsResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.GetLSRelationalDatabaseCmdlet">
            <summary>
            Returns information about a specific database in Amazon Lightsail.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSRelationalDatabaseCmdlet.RelationalDatabaseName">
            <summary>
            <para>
            <para>The name of the database that you are looking up.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSRelationalDatabaseCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'RelationalDatabase'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.GetRelationalDatabaseResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.GetRelationalDatabaseResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSRelationalDatabaseCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the RelationalDatabaseName parameter.
            The -PassThru parameter is deprecated, use -Select '^RelationalDatabaseName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.GetLSRelationalDatabaseBlueprintCmdlet">
            <summary>
            Returns a list of available database blueprints in Amazon Lightsail. A blueprint describes
            the major engine version of a database.
             
              
            <para>
            You can use a blueprint ID to create a new database that runs a specific database
            engine.
            </para><br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSRelationalDatabaseBlueprintCmdlet.PageToken">
            <summary>
            <para>
            <para>The token to advance to the next page of results from your request.</para><para>To get a page token, perform an initial <c>GetRelationalDatabaseBlueprints</c> request.
            If your results are paginated, the response will return a next page token that you
            can specify as the page token in a subsequent request.</para>
            </para>
            <para>
            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.
            <br/>In order to manually control output pagination, use '-PageToken $null' for the first call and '-PageToken $AWSHistory.LastServiceResponse.NextPageToken' for subsequent calls.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSRelationalDatabaseBlueprintCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Blueprints'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.GetRelationalDatabaseBlueprintsResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.GetRelationalDatabaseBlueprintsResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSRelationalDatabaseBlueprintCmdlet.NoAutoIteration">
            <summary>
            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple
            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of PageToken
            as the start point.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.GetLSRelationalDatabaseBundleCmdlet">
            <summary>
            Returns the list of bundles that are available in Amazon Lightsail. A bundle describes
            the performance specifications for a database.
             
              
            <para>
            You can use a bundle ID to create a new database with explicit performance specifications.
            </para><br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSRelationalDatabaseBundleCmdlet.IncludeInactive">
            <summary>
            <para>
            <para>A Boolean value that indicates whether to include inactive (unavailable) bundles in
            the response of your request.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSRelationalDatabaseBundleCmdlet.PageToken">
            <summary>
            <para>
            <para>The token to advance to the next page of results from your request.</para><para>To get a page token, perform an initial <c>GetRelationalDatabaseBundles</c> request.
            If your results are paginated, the response will return a next page token that you
            can specify as the page token in a subsequent request.</para>
            </para>
            <para>
            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.
            <br/>In order to manually control output pagination, use '-PageToken $null' for the first call and '-PageToken $AWSHistory.LastServiceResponse.NextPageToken' for subsequent calls.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSRelationalDatabaseBundleCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Bundles'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.GetRelationalDatabaseBundlesResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.GetRelationalDatabaseBundlesResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSRelationalDatabaseBundleCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the IncludeInactive parameter.
            The -PassThru parameter is deprecated, use -Select '^IncludeInactive' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSRelationalDatabaseBundleCmdlet.NoAutoIteration">
            <summary>
            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple
            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of PageToken
            as the start point.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.GetLSRelationalDatabaseEventCmdlet">
            <summary>
            Returns a list of events for a specific database in Amazon Lightsail.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSRelationalDatabaseEventCmdlet.DurationInMinute">
            <summary>
            <para>
            <para>The number of minutes in the past from which to retrieve events. For example, to get
            all events from the past 2 hours, enter 120.</para><para>Default: <c>60</c></para><para>The minimum is 1 and the maximum is 14 days (20160 minutes).</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSRelationalDatabaseEventCmdlet.RelationalDatabaseName">
            <summary>
            <para>
            <para>The name of the database from which to get events.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSRelationalDatabaseEventCmdlet.PageToken">
            <summary>
            <para>
            <para>The token to advance to the next page of results from your request.</para><para>To get a page token, perform an initial <c>GetRelationalDatabaseEvents</c> request.
            If your results are paginated, the response will return a next page token that you
            can specify as the page token in a subsequent request.</para>
            </para>
            <para>
            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.
            <br/>In order to manually control output pagination, use '-PageToken $null' for the first call and '-PageToken $AWSHistory.LastServiceResponse.NextPageToken' for subsequent calls.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSRelationalDatabaseEventCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'RelationalDatabaseEvents'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.GetRelationalDatabaseEventsResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.GetRelationalDatabaseEventsResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSRelationalDatabaseEventCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the RelationalDatabaseName parameter.
            The -PassThru parameter is deprecated, use -Select '^RelationalDatabaseName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSRelationalDatabaseEventCmdlet.NoAutoIteration">
            <summary>
            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple
            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of PageToken
            as the start point.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.GetLSRelationalDatabaseListCmdlet">
            <summary>
            Returns information about all of your databases in Amazon Lightsail.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSRelationalDatabaseListCmdlet.PageToken">
            <summary>
            <para>
            <para>The token to advance to the next page of results from your request.</para><para>To get a page token, perform an initial <c>GetRelationalDatabases</c> request. If
            your results are paginated, the response will return a next page token that you can
            specify as the page token in a subsequent request.</para>
            </para>
            <para>
            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.
            <br/>In order to manually control output pagination, use '-PageToken $null' for the first call and '-PageToken $AWSHistory.LastServiceResponse.NextPageToken' for subsequent calls.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSRelationalDatabaseListCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'RelationalDatabases'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.GetRelationalDatabasesResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.GetRelationalDatabasesResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSRelationalDatabaseListCmdlet.NoAutoIteration">
            <summary>
            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple
            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of PageToken
            as the start point.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.GetLSRelationalDatabaseLogEventCmdlet">
            <summary>
            Returns a list of log events for a database in Amazon Lightsail.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSRelationalDatabaseLogEventCmdlet.EndTime">
            <summary>
            <para>
            <para>The end of the time interval from which to get log events.</para><para>Constraints:</para><ul><li><para>Specified in Coordinated Universal Time (UTC).</para></li><li><para>Specified in the Unix time format.</para><para>For example, if you wish to use an end time of October 1, 2018, at 8 PM UTC, then
            you input <c>1538424000</c> as the end time.</para></li></ul>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSRelationalDatabaseLogEventCmdlet.LogStreamName">
            <summary>
            <para>
            <para>The name of the log stream.</para><para>Use the <c>get relational database log streams</c> operation to get a list of available
            log streams.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSRelationalDatabaseLogEventCmdlet.RelationalDatabaseName">
            <summary>
            <para>
            <para>The name of your database for which to get log events.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSRelationalDatabaseLogEventCmdlet.StartFromHead">
            <summary>
            <para>
            <para>Parameter to specify if the log should start from head or tail. If <c>true</c> is
            specified, the log event starts from the head of the log. If <c>false</c> is specified,
            the log event starts from the tail of the log.</para><note><para>For PostgreSQL, the default value of <c>false</c> is the only option available.</para></note>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSRelationalDatabaseLogEventCmdlet.StartTime">
            <summary>
            <para>
            <para>The start of the time interval from which to get log events.</para><para>Constraints:</para><ul><li><para>Specified in Coordinated Universal Time (UTC).</para></li><li><para>Specified in the Unix time format.</para><para>For example, if you wish to use a start time of October 1, 2018, at 8 PM UTC, then
            you input <c>1538424000</c> as the start time.</para></li></ul>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSRelationalDatabaseLogEventCmdlet.PageToken">
            <summary>
            <para>
            <para>The token to advance to the next or previous page of results from your request.</para><para>To get a page token, perform an initial <c>GetRelationalDatabaseLogEvents</c> request.
            If your results are paginated, the response will return a next forward token and/or
            next backward token that you can specify as the page token in a subsequent request.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSRelationalDatabaseLogEventCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is '*'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.GetRelationalDatabaseLogEventsResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.GetRelationalDatabaseLogEventsResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSRelationalDatabaseLogEventCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the RelationalDatabaseName parameter.
            The -PassThru parameter is deprecated, use -Select '^RelationalDatabaseName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.GetLSRelationalDatabaseLogStreamCmdlet">
            <summary>
            Returns a list of available log streams for a specific database in Amazon Lightsail.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSRelationalDatabaseLogStreamCmdlet.RelationalDatabaseName">
            <summary>
            <para>
            <para>The name of your database for which to get log streams.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSRelationalDatabaseLogStreamCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'LogStreams'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.GetRelationalDatabaseLogStreamsResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.GetRelationalDatabaseLogStreamsResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSRelationalDatabaseLogStreamCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the RelationalDatabaseName parameter.
            The -PassThru parameter is deprecated, use -Select '^RelationalDatabaseName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.GetLSRelationalDatabaseMasterUserPasswordCmdlet">
            <summary>
            Returns the current, previous, or pending versions of the master user password for
            a Lightsail database.
             
              
            <para>
            The <c>GetRelationalDatabaseMasterUserPassword</c> operation supports tag-based access
            control via resource tags applied to the resource identified by relationalDatabaseName.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSRelationalDatabaseMasterUserPasswordCmdlet.PasswordVersion">
            <summary>
            <para>
            <para>The password version to return.</para><para>Specifying <c>CURRENT</c> or <c>PREVIOUS</c> returns the current or previous passwords
            respectively. Specifying <c>PENDING</c> returns the newest version of the password
            that will rotate to <c>CURRENT</c>. After the <c>PENDING</c> password rotates to <c>CURRENT</c>,
            the <c>PENDING</c> password is no longer available.</para><para>Default: <c>CURRENT</c></para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSRelationalDatabaseMasterUserPasswordCmdlet.RelationalDatabaseName">
            <summary>
            <para>
            <para>The name of your database for which to get the master user password.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSRelationalDatabaseMasterUserPasswordCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is '*'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.GetRelationalDatabaseMasterUserPasswordResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.GetRelationalDatabaseMasterUserPasswordResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSRelationalDatabaseMasterUserPasswordCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the RelationalDatabaseName parameter.
            The -PassThru parameter is deprecated, use -Select '^RelationalDatabaseName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.GetLSRelationalDatabaseMetricDataCmdlet">
            <summary>
            Returns the data points of the specified metric for a database in Amazon Lightsail.
             
              
            <para>
            Metrics report the utilization of your resources, and the error counts generated by
            them. Monitor and collect metric data regularly to maintain the reliability, availability,
            and performance of your resources.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSRelationalDatabaseMetricDataCmdlet.EndTime">
            <summary>
            <para>
            <para>The end of the time interval from which to get metric data.</para><para>Constraints:</para><ul><li><para>Specified in Coordinated Universal Time (UTC).</para></li><li><para>Specified in the Unix time format.</para><para>For example, if you wish to use an end time of October 1, 2018, at 8 PM UTC, then
            you input <c>1538424000</c> as the end time.</para></li></ul>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSRelationalDatabaseMetricDataCmdlet.MetricName">
            <summary>
            <para>
            <para>The metric for which you want to return information.</para><para>Valid relational database metric names are listed below, along with the most useful
            <c>statistics</c> to include in your request, and the published <c>unit</c> value.
            All relational database metric data is available in 1-minute (60 seconds) granularity.</para><ul><li><para><b><c>CPUUtilization</c></b> - The percentage of CPU utilization currently in use
            on the database.</para><para><c>Statistics</c>: The most useful statistics are <c>Maximum</c> and <c>Average</c>.</para><para><c>Unit</c>: The published unit is <c>Percent</c>.</para></li><li><para><b><c>DatabaseConnections</c></b> - The number of database connections in use.</para><para><c>Statistics</c>: The most useful statistics are <c>Maximum</c> and <c>Sum</c>.</para><para><c>Unit</c>: The published unit is <c>Count</c>.</para></li><li><para><b><c>DiskQueueDepth</c></b> - The number of outstanding IOs (read/write requests)
            that are waiting to access the disk.</para><para><c>Statistics</c>: The most useful statistic is <c>Sum</c>.</para><para><c>Unit</c>: The published unit is <c>Count</c>.</para></li><li><para><b><c>FreeStorageSpace</c></b> - The amount of available storage space.</para><para><c>Statistics</c>: The most useful statistic is <c>Sum</c>.</para><para><c>Unit</c>: The published unit is <c>Bytes</c>.</para></li><li><para><b><c>NetworkReceiveThroughput</c></b> - The incoming (Receive) network traffic
            on the database, including both customer database traffic and AWS traffic used for
            monitoring and replication.</para><para><c>Statistics</c>: The most useful statistic is <c>Average</c>.</para><para><c>Unit</c>: The published unit is <c>Bytes/Second</c>.</para></li><li><para><b><c>NetworkTransmitThroughput</c></b> - The outgoing (Transmit) network traffic
            on the database, including both customer database traffic and AWS traffic used for
            monitoring and replication.</para><para><c>Statistics</c>: The most useful statistic is <c>Average</c>.</para><para><c>Unit</c>: The published unit is <c>Bytes/Second</c>.</para></li></ul>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSRelationalDatabaseMetricDataCmdlet.Period">
            <summary>
            <para>
            <para>The granularity, in seconds, of the returned data points.</para><para>All relational database metric data is available in 1-minute (60 seconds) granularity.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSRelationalDatabaseMetricDataCmdlet.RelationalDatabaseName">
            <summary>
            <para>
            <para>The name of your database from which to get metric data.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSRelationalDatabaseMetricDataCmdlet.StartTime">
            <summary>
            <para>
            <para>The start of the time interval from which to get metric data.</para><para>Constraints:</para><ul><li><para>Specified in Coordinated Universal Time (UTC).</para></li><li><para>Specified in the Unix time format.</para><para>For example, if you wish to use a start time of October 1, 2018, at 8 PM UTC, then
            you input <c>1538424000</c> as the start time.</para></li></ul>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSRelationalDatabaseMetricDataCmdlet.Statistic">
            <summary>
            <para>
            <para>The statistic for the metric.</para><para>The following statistics are available:</para><ul><li><para><c>Minimum</c> - The lowest value observed during the specified period. Use this
            value to determine low volumes of activity for your application.</para></li><li><para><c>Maximum</c> - The highest value observed during the specified period. Use this
            value to determine high volumes of activity for your application.</para></li><li><para><c>Sum</c> - All values submitted for the matching metric added together. You can
            use this statistic to determine the total volume of a metric.</para></li><li><para><c>Average</c> - The value of Sum / SampleCount during the specified period. By comparing
            this statistic with the Minimum and Maximum values, you can determine the full scope
            of a metric and how close the average use is to the Minimum and Maximum values. This
            comparison helps you to know when to increase or decrease your resources.</para></li><li><para><c>SampleCount</c> - The count, or number, of data points used for the statistical
            calculation.</para></li></ul>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSRelationalDatabaseMetricDataCmdlet.Unit">
            <summary>
            <para>
            <para>The unit for the metric data request. Valid units depend on the metric data being
            requested. For the valid units with each available metric, see the <c>metricName</c>
            parameter.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSRelationalDatabaseMetricDataCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is '*'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.GetRelationalDatabaseMetricDataResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.GetRelationalDatabaseMetricDataResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSRelationalDatabaseMetricDataCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the MetricName parameter.
            The -PassThru parameter is deprecated, use -Select '^MetricName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.GetLSRelationalDatabaseParameterCmdlet">
            <summary>
            Returns all of the runtime parameters offered by the underlying database software,
            or engine, for a specific database in Amazon Lightsail.
             
              
            <para>
            In addition to the parameter names and values, this operation returns other information
            about each parameter. This information includes whether changes require a reboot,
            whether the parameter is modifiable, the allowed values, and the data types.
            </para><br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSRelationalDatabaseParameterCmdlet.RelationalDatabaseName">
            <summary>
            <para>
            <para>The name of your database for which to get parameters.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSRelationalDatabaseParameterCmdlet.PageToken">
            <summary>
            <para>
            <para>The token to advance to the next page of results from your request.</para><para>To get a page token, perform an initial <c>GetRelationalDatabaseParameters</c> request.
            If your results are paginated, the response will return a next page token that you
            can specify as the page token in a subsequent request.</para>
            </para>
            <para>
            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.
            <br/>In order to manually control output pagination, use '-PageToken $null' for the first call and '-PageToken $AWSHistory.LastServiceResponse.NextPageToken' for subsequent calls.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSRelationalDatabaseParameterCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Parameters'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.GetRelationalDatabaseParametersResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.GetRelationalDatabaseParametersResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSRelationalDatabaseParameterCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the RelationalDatabaseName parameter.
            The -PassThru parameter is deprecated, use -Select '^RelationalDatabaseName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSRelationalDatabaseParameterCmdlet.NoAutoIteration">
            <summary>
            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple
            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of PageToken
            as the start point.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.GetLSRelationalDatabaseSnapshotCmdlet">
            <summary>
            Returns information about a specific database snapshot in Amazon Lightsail.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSRelationalDatabaseSnapshotCmdlet.RelationalDatabaseSnapshotName">
            <summary>
            <para>
            <para>The name of the database snapshot for which to get information.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSRelationalDatabaseSnapshotCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'RelationalDatabaseSnapshot'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.GetRelationalDatabaseSnapshotResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.GetRelationalDatabaseSnapshotResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSRelationalDatabaseSnapshotCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the RelationalDatabaseSnapshotName parameter.
            The -PassThru parameter is deprecated, use -Select '^RelationalDatabaseSnapshotName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.GetLSRelationalDatabaseSnapshotListCmdlet">
            <summary>
            Returns information about all of your database snapshots in Amazon Lightsail.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSRelationalDatabaseSnapshotListCmdlet.PageToken">
            <summary>
            <para>
            <para>The token to advance to the next page of results from your request.</para><para>To get a page token, perform an initial <c>GetRelationalDatabaseSnapshots</c> request.
            If your results are paginated, the response will return a next page token that you
            can specify as the page token in a subsequent request.</para>
            </para>
            <para>
            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.
            <br/>In order to manually control output pagination, use '-PageToken $null' for the first call and '-PageToken $AWSHistory.LastServiceResponse.NextPageToken' for subsequent calls.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSRelationalDatabaseSnapshotListCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'RelationalDatabaseSnapshots'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.GetRelationalDatabaseSnapshotsResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.GetRelationalDatabaseSnapshotsResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSRelationalDatabaseSnapshotListCmdlet.NoAutoIteration">
            <summary>
            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple
            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of PageToken
            as the start point.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.GetLSSetupHistoryCmdlet">
            <summary>
            Returns detailed information for five of the most recent <c>SetupInstanceHttps</c>
            requests that were ran on the target instance.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSSetupHistoryCmdlet.ResourceName">
            <summary>
            <para>
            <para>The name of the resource for which you are requesting information.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSSetupHistoryCmdlet.PageToken">
            <summary>
            <para>
            <para>The token to advance to the next page of results from your request.</para><para>To get a page token, perform an initial <c>GetSetupHistory</c> request. If your results
            are paginated, the response will return a next page token that you can specify as
            the page token in a subsequent request.</para>
            </para>
            <para>
            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.
            <br/>In order to manually control output pagination, use '-PageToken $null' for the first call and '-PageToken $AWSHistory.LastServiceResponse.NextPageToken' for subsequent calls.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSSetupHistoryCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'SetupHistory'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.GetSetupHistoryResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.GetSetupHistoryResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSSetupHistoryCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the ResourceName parameter.
            The -PassThru parameter is deprecated, use -Select '^ResourceName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSSetupHistoryCmdlet.NoAutoIteration">
            <summary>
            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple
            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of PageToken
            as the start point.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.GetLSStaticIpCmdlet">
            <summary>
            Returns information about an Amazon Lightsail static IP.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSStaticIpCmdlet.StaticIpName">
            <summary>
            <para>
            <para>The name of the static IP in Lightsail.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSStaticIpCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'StaticIp'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.GetStaticIpResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.GetStaticIpResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSStaticIpCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the StaticIpName parameter.
            The -PassThru parameter is deprecated, use -Select '^StaticIpName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.GetLSStaticIpListCmdlet">
            <summary>
            Returns information about all static IPs in the user's account.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSStaticIpListCmdlet.PageToken">
            <summary>
            <para>
            <para>The token to advance to the next page of results from your request.</para><para>To get a page token, perform an initial <c>GetStaticIps</c> request. If your results
            are paginated, the response will return a next page token that you can specify as
            the page token in a subsequent request.</para>
            </para>
            <para>
            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.
            <br/>In order to manually control output pagination, use '-PageToken $null' for the first call and '-PageToken $AWSHistory.LastServiceResponse.NextPageToken' for subsequent calls.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSStaticIpListCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'StaticIps'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.GetStaticIpsResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.GetStaticIpsResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.GetLSStaticIpListCmdlet.NoAutoIteration">
            <summary>
            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple
            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of PageToken
            as the start point.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.ImportLSKeyPairCmdlet">
            <summary>
            Imports a public SSH key from a specific key pair.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.ImportLSKeyPairCmdlet.KeyPairName">
            <summary>
            <para>
            <para>The name of the key pair for which you want to import the public key.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.ImportLSKeyPairCmdlet.PublicKeyBase64">
            <summary>
            <para>
            <para>A base64-encoded public key of the <c>ssh-rsa</c> type.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.ImportLSKeyPairCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Operation'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.ImportKeyPairResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.ImportKeyPairResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.ImportLSKeyPairCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the PublicKeyBase64 parameter.
            The -PassThru parameter is deprecated, use -Select '^PublicKeyBase64' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.ImportLSKeyPairCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.MountLSCertificateToDistributionCmdlet">
            <summary>
            Attaches an SSL/TLS certificate to your Amazon Lightsail content delivery network
            (CDN) distribution.
             
              
            <para>
            After the certificate is attached, your distribution accepts HTTPS traffic for all
            of the domains that are associated with the certificate.
            </para><para>
            Use the <c>CreateCertificate</c> action to create a certificate that you can attach
            to your distribution.
            </para><important><para>
            Only certificates created in the <c>us-east-1</c> Amazon Web Services Region can be
            attached to Lightsail distributions. Lightsail distributions are global resources
            that can reference an origin in any Amazon Web Services Region, and distribute its
            content globally. However, all distributions are located in the <c>us-east-1</c> Region.
            </para></important>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.MountLSCertificateToDistributionCmdlet.CertificateName">
            <summary>
            <para>
            <para>The name of the certificate to attach to a distribution.</para><para>Only certificates with a status of <c>ISSUED</c> can be attached to a distribution.</para><para>Use the <c>GetCertificates</c> action to get a list of certificate names that you
            can specify.</para><note><para>This is the name of the certificate resource type and is used only to reference the
            certificate in other API actions. It can be different than the domain name of the
            certificate. For example, your certificate name might be <c>WordPress-Blog-Certificate</c>
            and the domain name of the certificate might be <c>example.com</c>.</para></note>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.MountLSCertificateToDistributionCmdlet.DistributionName">
            <summary>
            <para>
            <para>The name of the distribution that the certificate will be attached to.</para><para>Use the <c>GetDistributions</c> action to get a list of distribution names that you
            can specify.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.MountLSCertificateToDistributionCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Operation'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.AttachCertificateToDistributionResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.AttachCertificateToDistributionResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.MountLSCertificateToDistributionCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the DistributionName parameter.
            The -PassThru parameter is deprecated, use -Select '^DistributionName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.MountLSCertificateToDistributionCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.MountLSStaticIpCmdlet">
            <summary>
            Attaches a static IP address to a specific Amazon Lightsail instance.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.MountLSStaticIpCmdlet.InstanceName">
            <summary>
            <para>
            <para>The instance name to which you want to attach the static IP address.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.MountLSStaticIpCmdlet.StaticIpName">
            <summary>
            <para>
            <para>The name of the static IP.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.MountLSStaticIpCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Operations'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.AttachStaticIpResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.AttachStaticIpResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.MountLSStaticIpCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the StaticIpName parameter.
            The -PassThru parameter is deprecated, use -Select '^StaticIpName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.MountLSStaticIpCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.NewLSBucketCmdlet">
            <summary>
            Creates an Amazon Lightsail bucket.
             
              
            <para>
            A bucket is a cloud storage resource available in the Lightsail object storage service.
            Use buckets to store objects such as data and its descriptive metadata. For more information
            about buckets, see <a href="https://lightsail.aws.amazon.com/ls/docs/en_us/articles/buckets-in-amazon-lightsail">Buckets
            in Amazon Lightsail</a> in the <i>Amazon Lightsail Developer Guide</i>.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSBucketCmdlet.BucketName">
            <summary>
            <para>
            <para>The name for the bucket.</para><para>For more information about bucket names, see <a href="https://lightsail.aws.amazon.com/ls/docs/en_us/articles/bucket-naming-rules-in-amazon-lightsail">Bucket
            naming rules in Amazon Lightsail</a> in the <i>Amazon Lightsail Developer Guide</i>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSBucketCmdlet.BundleId">
            <summary>
            <para>
            <para>The ID of the bundle to use for the bucket.</para><para>A bucket bundle specifies the monthly cost, storage space, and data transfer quota
            for a bucket.</para><para>Use the <a href="https://docs.aws.amazon.com/lightsail/2016-11-28/api-reference/API_GetBucketBundles.html">GetBucketBundles</a>
            action to get a list of bundle IDs that you can specify.</para><para>Use the <a href="https://docs.aws.amazon.com/lightsail/2016-11-28/api-reference/API_UpdateBucketBundle.html">UpdateBucketBundle</a>
            action to change the bundle after the bucket is created.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSBucketCmdlet.EnableObjectVersioning">
            <summary>
            <para>
            <para>A Boolean value that indicates whether to enable versioning of objects in the bucket.</para><para>For more information about versioning, see <a href="https://lightsail.aws.amazon.com/ls/docs/en_us/articles/amazon-lightsail-managing-bucket-object-versioning">Enabling
            and suspending object versioning in a bucket in Amazon Lightsail</a> in the <i>Amazon
            Lightsail Developer Guide</i>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSBucketCmdlet.Tag">
            <summary>
            <para>
            <para>The tag keys and optional values to add to the bucket during creation.</para><para>Use the <a href="https://docs.aws.amazon.com/lightsail/2016-11-28/api-reference/API_TagResource.html">TagResource</a>
            action to tag the bucket after it's created.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSBucketCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is '*'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.CreateBucketResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.CreateBucketResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSBucketCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the BucketName parameter.
            The -PassThru parameter is deprecated, use -Select '^BucketName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSBucketCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.NewLSBucketAccessKeyCmdlet">
            <summary>
            Creates a new access key for the specified Amazon Lightsail bucket. Access keys consist
            of an access key ID and corresponding secret access key.
             
              
            <para>
            Access keys grant full programmatic access to the specified bucket and its objects.
            You can have a maximum of two access keys per bucket. Use the <a href="https://docs.aws.amazon.com/lightsail/2016-11-28/api-reference/API_GetBucketAccessKeys.html">GetBucketAccessKeys</a>
            action to get a list of current access keys for a specific bucket. For more information
            about access keys, see <a href="https://lightsail.aws.amazon.com/ls/docs/en_us/articles/amazon-lightsail-creating-bucket-access-keys">Creating
            access keys for a bucket in Amazon Lightsail</a> in the <i>Amazon Lightsail Developer
            Guide</i>.
            </para><important><para>
            The <c>secretAccessKey</c> value is returned only in response to the <c>CreateBucketAccessKey</c>
            action. You can get a secret access key only when you first create an access key;
            you cannot get the secret access key later. If you lose the secret access key, you
            must create a new access key.
            </para></important>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSBucketAccessKeyCmdlet.BucketName">
            <summary>
            <para>
            <para>The name of the bucket that the new access key will belong to, and grant access to.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSBucketAccessKeyCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is '*'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.CreateBucketAccessKeyResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.CreateBucketAccessKeyResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSBucketAccessKeyCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the BucketName parameter.
            The -PassThru parameter is deprecated, use -Select '^BucketName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSBucketAccessKeyCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.NewLSCertificateCmdlet">
            <summary>
            Creates an SSL/TLS certificate for an Amazon Lightsail content delivery network (CDN)
            distribution and a container service.
             
              
            <para>
            After the certificate is valid, use the <c>AttachCertificateToDistribution</c> action
            to use the certificate and its domains with your distribution. Or use the <c>UpdateContainerService</c>
            action to use the certificate and its domains with your container service.
            </para><important><para>
            Only certificates created in the <c>us-east-1</c> Amazon Web Services Region can be
            attached to Lightsail distributions. Lightsail distributions are global resources
            that can reference an origin in any Amazon Web Services Region, and distribute its
            content globally. However, all distributions are located in the <c>us-east-1</c> Region.
            </para></important>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSCertificateCmdlet.CertificateName">
            <summary>
            <para>
            <para>The name for the certificate.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSCertificateCmdlet.DomainName">
            <summary>
            <para>
            <para>The domain name (<c>example.com</c>) for the certificate.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSCertificateCmdlet.SubjectAlternativeName">
            <summary>
            <para>
            <para>An array of strings that specify the alternate domains (<c>example2.com</c>) and subdomains
            (<c>blog.example.com</c>) for the certificate.</para><para>You can specify a maximum of nine alternate domains (in addition to the primary domain
            name).</para><para>Wildcard domain entries (<c>*.example.com</c>) are not supported.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSCertificateCmdlet.Tag">
            <summary>
            <para>
            <para>The tag keys and optional values to add to the certificate during create.</para><para>Use the <c>TagResource</c> action to tag a resource after it's created.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSCertificateCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is '*'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.CreateCertificateResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.CreateCertificateResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSCertificateCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the CertificateName parameter.
            The -PassThru parameter is deprecated, use -Select '^CertificateName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSCertificateCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.NewLSCloudFormationStackCmdlet">
            <summary>
            Creates an AWS CloudFormation stack, which creates a new Amazon EC2 instance from
            an exported Amazon Lightsail snapshot. This operation results in a CloudFormation
            stack record that can be used to track the AWS CloudFormation stack created. Use the
            <c>get cloud formation stack records</c> operation to get a list of the CloudFormation
            stacks created.
             
             <important><para>
            Wait until after your new Amazon EC2 instance is created before running the <c>create
            cloud formation stack</c> operation again with the same export snapshot record.
            </para></important>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSCloudFormationStackCmdlet.Instance">
            <summary>
            <para>
            <para>An array of parameters that will be used to create the new Amazon EC2 instance. You
            can only pass one instance entry at a time in this array. You will get an invalid
            parameter error if you pass more than one instance entry in this array.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSCloudFormationStackCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Operations'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.CreateCloudFormationStackResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.CreateCloudFormationStackResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSCloudFormationStackCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the Instance parameter.
            The -PassThru parameter is deprecated, use -Select '^Instance' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSCloudFormationStackCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.NewLSContactMethodCmdlet">
            <summary>
            Creates an email or SMS text message contact method.
             
              
            <para>
            A contact method is used to send you notifications about your Amazon Lightsail resources.
            You can add one email address and one mobile phone number contact method in each Amazon
            Web Services Region. However, SMS text messaging is not supported in some Amazon Web
            Services Regions, and SMS text messages cannot be sent to some countries/regions.
            For more information, see <a href="https://lightsail.aws.amazon.com/ls/docs/en_us/articles/amazon-lightsail-notifications">Notifications
            in Amazon Lightsail</a>.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSContactMethodCmdlet.ContactEndpoint">
            <summary>
            <para>
            <para>The destination of the contact method, such as an email address or a mobile phone
            number.</para><para>Use the E.164 format when specifying a mobile phone number. E.164 is a standard for
            the phone number structure used for international telecommunication. Phone numbers
            that follow this format can have a maximum of 15 digits, and they are prefixed with
            the plus character (+) and the country code. For example, a U.S. phone number in E.164
            format would be specified as +1XXX5550100. For more information, see <a href="https://en.wikipedia.org/wiki/E.164">E.164</a>
            on <i>Wikipedia</i>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSContactMethodCmdlet.Protocol">
            <summary>
            <para>
            <para>The protocol of the contact method, such as <c>Email</c> or <c>SMS</c> (text messaging).</para><para>The <c>SMS</c> protocol is supported only in the following Amazon Web Services Regions.</para><ul><li><para>US East (N. Virginia) (<c>us-east-1</c>)</para></li><li><para>US West (Oregon) (<c>us-west-2</c>)</para></li><li><para>Europe (Ireland) (<c>eu-west-1</c>)</para></li><li><para>Asia Pacific (Tokyo) (<c>ap-northeast-1</c>)</para></li><li><para>Asia Pacific (Singapore) (<c>ap-southeast-1</c>)</para></li><li><para>Asia Pacific (Sydney) (<c>ap-southeast-2</c>)</para></li></ul><para>For a list of countries/regions where SMS text messages can be sent, and the latest
            Amazon Web Services Regions where SMS text messaging is supported, see <a href="https://docs.aws.amazon.com/sns/latest/dg/sns-supported-regions-countries.html">Supported
            Regions and Countries</a> in the <i>Amazon SNS Developer Guide</i>.</para><para>For more information about notifications in Amazon Lightsail, see <a href="https://lightsail.aws.amazon.com/ls/docs/en_us/articles/amazon-lightsail-notifications">Notifications
            in Amazon Lightsail</a>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSContactMethodCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Operations'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.CreateContactMethodResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.CreateContactMethodResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSContactMethodCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the ContactEndpoint parameter.
            The -PassThru parameter is deprecated, use -Select '^ContactEndpoint' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSContactMethodCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.NewLSContainerServiceCmdlet">
            <summary>
            Creates an Amazon Lightsail container service.
             
              
            <para>
            A Lightsail container service is a compute resource to which you can deploy containers.
            For more information, see <a href="https://lightsail.aws.amazon.com/ls/docs/en_us/articles/amazon-lightsail-container-services">Container
            services in Amazon Lightsail</a> in the <i>Lightsail Dev Guide</i>.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSContainerServiceCmdlet.PublicEndpoint_ContainerName">
            <summary>
            <para>
            <para>The name of the container for the endpoint.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSContainerServiceCmdlet.PublicEndpoint_ContainerPort">
            <summary>
            <para>
            <para>The port of the container to which traffic is forwarded to.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSContainerServiceCmdlet.Deployment_Container">
            <summary>
            <para>
            <para>An object that describes the configuration for the containers of the deployment.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSContainerServiceCmdlet.HealthCheck_HealthyThreshold">
            <summary>
            <para>
            <para>The number of consecutive health checks successes required before moving the container
            to the <c>Healthy</c> state. The default value is <c>2</c>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSContainerServiceCmdlet.HealthCheck_IntervalSecond">
            <summary>
            <para>
            <para>The approximate interval, in seconds, between health checks of an individual container.
            You can specify between 5 and 300 seconds. The default value is <c>5</c>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSContainerServiceCmdlet.EcrImagePullerRole_IsActive">
            <summary>
            <para>
            <para>A Boolean value that indicates whether to activate the role.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSContainerServiceCmdlet.HealthCheck_Path">
            <summary>
            <para>
            <para>The path on the container on which to perform the health check. The default value
            is <c>/</c>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSContainerServiceCmdlet.Power">
            <summary>
            <para>
            <para>The power specification for the container service.</para><para>The power specifies the amount of memory, vCPUs, and base monthly cost of each node
            of the container service. The <c>power</c> and <c>scale</c> of a container service
            makes up its configured capacity. To determine the monthly price of your container
            service, multiply the base price of the <c>power</c> with the <c>scale</c> (the number
            of nodes) of the service.</para><para>Use the <c>GetContainerServicePowers</c> action to get a list of power options that
            you can specify using this parameter, and their base monthly cost.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSContainerServiceCmdlet.PublicDomainName">
            <summary>
            <para>
            <para>The public domain names to use with the container service, such as <c>example.com</c>
            and <c>www.example.com</c>.</para><para>You can specify up to four public domain names for a container service. The domain
            names that you specify are used when you create a deployment with a container configured
            as the public endpoint of your container service.</para><para>If you don't specify public domain names, then you can use the default domain of the
            container service.</para><important><para>You must create and validate an SSL/TLS certificate before you can use public domain
            names with your container service. Use the <c>CreateCertificate</c> action to create
            a certificate for the public domain names you want to use with your container service.</para></important><para>You can specify public domain names using a string to array map as shown in the example
            later on this page.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSContainerServiceCmdlet.Scale">
            <summary>
            <para>
            <para>The scale specification for the container service.</para><para>The scale specifies the allocated compute nodes of the container service. The <c>power</c>
            and <c>scale</c> of a container service makes up its configured capacity. To determine
            the monthly price of your container service, multiply the base price of the <c>power</c>
            with the <c>scale</c> (the number of nodes) of the service.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSContainerServiceCmdlet.ServiceName">
            <summary>
            <para>
            <para>The name for the container service.</para><para>The name that you specify for your container service will make up part of its default
            domain. The default domain of a container service is typically <c>https://&lt;ServiceName&gt;.&lt;RandomGUID&gt;.&lt;AWSRegion&gt;.cs.amazonlightsail.com</c>.
            If the name of your container service is <c>container-service-1</c>, and it's located
            in the US East (Ohio) Amazon Web Services Region (<c>us-east-2</c>), then the domain
            for your container service will be like the following example: <c>https://container-service-1.ur4EXAMPLE2uq.us-east-2.cs.amazonlightsail.com</c></para><para>The following are the requirements for container service names:</para><ul><li><para>Must be unique within each Amazon Web Services Region in your Lightsail account.</para></li><li><para>Must contain 1 to 63 characters.</para></li><li><para>Must contain only alphanumeric characters and hyphens.</para></li><li><para>A hyphen (-) can separate words but cannot be at the start or end of the name.</para></li></ul>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSContainerServiceCmdlet.HealthCheck_SuccessCode">
            <summary>
            <para>
            <para>The HTTP codes to use when checking for a successful response from a container. You
            can specify values between <c>200</c> and <c>499</c>. You can specify multiple values
            (for example, <c>200,202</c>) or a range of values (for example, <c>200-299</c>).</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSContainerServiceCmdlet.Tag">
            <summary>
            <para>
            <para>The tag keys and optional values to add to the container service during create.</para><para>Use the <c>TagResource</c> action to tag a resource after it's created.</para><para>For more information about tags in Lightsail, see the <a href="https://lightsail.aws.amazon.com/ls/docs/en_us/articles/amazon-lightsail-tags">Amazon
            Lightsail Developer Guide</a>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSContainerServiceCmdlet.HealthCheck_TimeoutSecond">
            <summary>
            <para>
            <para>The amount of time, in seconds, during which no response means a failed health check.
            You can specify between 2 and 60 seconds. The default value is <c>2</c>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSContainerServiceCmdlet.HealthCheck_UnhealthyThreshold">
            <summary>
            <para>
            <para>The number of consecutive health check failures required before moving the container
            to the <c>Unhealthy</c> state. The default value is <c>2</c>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSContainerServiceCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'ContainerService'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.CreateContainerServiceResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.CreateContainerServiceResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSContainerServiceCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the ServiceName parameter.
            The -PassThru parameter is deprecated, use -Select '^ServiceName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSContainerServiceCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.NewLSContainerServiceDeploymentCmdlet">
            <summary>
            Creates a deployment for your Amazon Lightsail container service.
             
              
            <para>
            A deployment specifies the containers that will be launched on the container service
            and their settings, such as the ports to open, the environment variables to apply,
            and the launch command to run. It also specifies the container that will serve as
            the public endpoint of the deployment and its settings, such as the HTTP or HTTPS
            port to use, and the health check configuration.
            </para><para>
            You can deploy containers to your container service using container images from a
            public registry such as Amazon ECR Public, or from your local machine. For more information,
            see <a href="https://lightsail.aws.amazon.com/ls/docs/en_us/articles/amazon-lightsail-creating-container-images">Creating
            container images for your Amazon Lightsail container services</a> in the <i>Amazon
            Lightsail Developer Guide</i>.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSContainerServiceDeploymentCmdlet.PublicEndpoint_ContainerName">
            <summary>
            <para>
            <para>The name of the container for the endpoint.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSContainerServiceDeploymentCmdlet.PublicEndpoint_ContainerPort">
            <summary>
            <para>
            <para>The port of the container to which traffic is forwarded to.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSContainerServiceDeploymentCmdlet.Container">
            <summary>
            <para>
            <para>An object that describes the settings of the containers that will be launched on the
            container service.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSContainerServiceDeploymentCmdlet.HealthCheck_HealthyThreshold">
            <summary>
            <para>
            <para>The number of consecutive health checks successes required before moving the container
            to the <c>Healthy</c> state. The default value is <c>2</c>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSContainerServiceDeploymentCmdlet.HealthCheck_IntervalSecond">
            <summary>
            <para>
            <para>The approximate interval, in seconds, between health checks of an individual container.
            You can specify between 5 and 300 seconds. The default value is <c>5</c>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSContainerServiceDeploymentCmdlet.HealthCheck_Path">
            <summary>
            <para>
            <para>The path on the container on which to perform the health check. The default value
            is <c>/</c>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSContainerServiceDeploymentCmdlet.ServiceName">
            <summary>
            <para>
            <para>The name of the container service for which to create the deployment.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSContainerServiceDeploymentCmdlet.HealthCheck_SuccessCode">
            <summary>
            <para>
            <para>The HTTP codes to use when checking for a successful response from a container. You
            can specify values between <c>200</c> and <c>499</c>. You can specify multiple values
            (for example, <c>200,202</c>) or a range of values (for example, <c>200-299</c>).</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSContainerServiceDeploymentCmdlet.HealthCheck_TimeoutSecond">
            <summary>
            <para>
            <para>The amount of time, in seconds, during which no response means a failed health check.
            You can specify between 2 and 60 seconds. The default value is <c>2</c>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSContainerServiceDeploymentCmdlet.HealthCheck_UnhealthyThreshold">
            <summary>
            <para>
            <para>The number of consecutive health check failures required before moving the container
            to the <c>Unhealthy</c> state. The default value is <c>2</c>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSContainerServiceDeploymentCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'ContainerService'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.CreateContainerServiceDeploymentResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.CreateContainerServiceDeploymentResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSContainerServiceDeploymentCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the ServiceName parameter.
            The -PassThru parameter is deprecated, use -Select '^ServiceName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSContainerServiceDeploymentCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.NewLSContainerServiceRegistryLoginCmdlet">
            <summary>
            Creates a temporary set of log in credentials that you can use to log in to the Docker
            process on your local machine. After you're logged in, you can use the native Docker
            commands to push your local container images to the container image registry of your
            Amazon Lightsail account so that you can use them with your Lightsail container service.
            The log in credentials expire 12 hours after they are created, at which point you
            will need to create a new set of log in credentials.
             
             <note><para>
            You can only push container images to the container service registry of your Lightsail
            account. You cannot pull container images or perform any other container image management
            actions on the container service registry.
            </para></note><para>
            After you push your container images to the container image registry of your Lightsail
            account, use the <c>RegisterContainerImage</c> action to register the pushed images
            to a specific Lightsail container service.
            </para><note><para>
            This action is not required if you install and use the Lightsail Control (lightsailctl)
            plugin to push container images to your Lightsail container service. For more information,
            see <a href="https://lightsail.aws.amazon.com/ls/docs/en_us/articles/amazon-lightsail-pushing-container-images">Pushing
            and managing container images on your Amazon Lightsail container services</a> in the
            <i>Amazon Lightsail Developer Guide</i>.
            </para></note>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSContainerServiceRegistryLoginCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'RegistryLogin'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.CreateContainerServiceRegistryLoginResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.CreateContainerServiceRegistryLoginResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSContainerServiceRegistryLoginCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.NewLSDiskCmdlet">
            <summary>
            Creates a block storage disk that can be attached to an Amazon Lightsail instance
            in the same Availability Zone (<c>us-east-2a</c>).
             
              
            <para>
            The <c>create disk</c> operation supports tag-based access control via request tags.
            For more information, see the <a href="https://lightsail.aws.amazon.com/ls/docs/en_us/articles/amazon-lightsail-controlling-access-using-tags">Amazon
            Lightsail Developer Guide</a>.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSDiskCmdlet.AddOn">
            <summary>
            <para>
            <para>An array of objects that represent the add-ons to enable for the new disk.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSDiskCmdlet.AvailabilityZone">
            <summary>
            <para>
            <para>The Availability Zone where you want to create the disk (<c>us-east-2a</c>). Use the
            same Availability Zone as the Lightsail instance to which you want to attach the disk.</para><para>Use the <c>get regions</c> operation to list the Availability Zones where Lightsail
            is currently available.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSDiskCmdlet.DiskName">
            <summary>
            <para>
            <para>The unique Lightsail disk name (<c>my-disk</c>).</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSDiskCmdlet.SizeInGb">
            <summary>
            <para>
            <para>The size of the disk in GB (<c>32</c>).</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSDiskCmdlet.Tag">
            <summary>
            <para>
            <para>The tag keys and optional values to add to the resource during create.</para><para>Use the <c>TagResource</c> action to tag a resource after it's created.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSDiskCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Operations'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.CreateDiskResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.CreateDiskResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSDiskCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the DiskName parameter.
            The -PassThru parameter is deprecated, use -Select '^DiskName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSDiskCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.NewLSDiskFromSnapshotCmdlet">
            <summary>
            Creates a block storage disk from a manual or automatic snapshot of a disk. The resulting
            disk can be attached to an Amazon Lightsail instance in the same Availability Zone
            (<c>us-east-2a</c>).
             
              
            <para>
            The <c>create disk from snapshot</c> operation supports tag-based access control via
            request tags and resource tags applied to the resource identified by <c>disk snapshot
            name</c>. For more information, see the <a href="https://lightsail.aws.amazon.com/ls/docs/en_us/articles/amazon-lightsail-controlling-access-using-tags">Amazon
            Lightsail Developer Guide</a>.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSDiskFromSnapshotCmdlet.AddOn">
            <summary>
            <para>
            <para>An array of objects that represent the add-ons to enable for the new disk.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSDiskFromSnapshotCmdlet.AvailabilityZone">
            <summary>
            <para>
            <para>The Availability Zone where you want to create the disk (<c>us-east-2a</c>). Choose
            the same Availability Zone as the Lightsail instance where you want to create the
            disk.</para><para>Use the GetRegions operation to list the Availability Zones where Lightsail is currently
            available.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSDiskFromSnapshotCmdlet.DiskName">
            <summary>
            <para>
            <para>The unique Lightsail disk name (<c>my-disk</c>).</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSDiskFromSnapshotCmdlet.DiskSnapshotName">
            <summary>
            <para>
            <para>The name of the disk snapshot (<c>my-snapshot</c>) from which to create the new storage
            disk.</para><para>Constraint:</para><ul><li><para>This parameter cannot be defined together with the <c>source disk name</c> parameter.
            The <c>disk snapshot name</c> and <c>source disk name</c> parameters are mutually
            exclusive.</para></li></ul>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSDiskFromSnapshotCmdlet.RestoreDate">
            <summary>
            <para>
            <para>The date of the automatic snapshot to use for the new disk. Use the <c>get auto snapshots</c>
            operation to identify the dates of the available automatic snapshots.</para><para>Constraints:</para><ul><li><para>Must be specified in <c>YYYY-MM-DD</c> format.</para></li><li><para>This parameter cannot be defined together with the <c>use latest restorable auto snapshot</c>
            parameter. The <c>restore date</c> and <c>use latest restorable auto snapshot</c>
            parameters are mutually exclusive.</para></li><li><para>Define this parameter only when creating a new disk from an automatic snapshot. For
            more information, see the <a href="https://lightsail.aws.amazon.com/ls/docs/en_us/articles/amazon-lightsail-configuring-automatic-snapshots">Amazon
            Lightsail Developer Guide</a>.</para></li></ul>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSDiskFromSnapshotCmdlet.SizeInGb">
            <summary>
            <para>
            <para>The size of the disk in GB (<c>32</c>).</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSDiskFromSnapshotCmdlet.SourceDiskName">
            <summary>
            <para>
            <para>The name of the source disk from which the source automatic snapshot was created.</para><para>Constraints:</para><ul><li><para>This parameter cannot be defined together with the <c>disk snapshot name</c> parameter.
            The <c>source disk name</c> and <c>disk snapshot name</c> parameters are mutually
            exclusive.</para></li><li><para>Define this parameter only when creating a new disk from an automatic snapshot. For
            more information, see the <a href="https://lightsail.aws.amazon.com/ls/docs/en_us/articles/amazon-lightsail-configuring-automatic-snapshots">Amazon
            Lightsail Developer Guide</a>.</para></li></ul>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSDiskFromSnapshotCmdlet.Tag">
            <summary>
            <para>
            <para>The tag keys and optional values to add to the resource during create.</para><para>Use the <c>TagResource</c> action to tag a resource after it's created.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSDiskFromSnapshotCmdlet.UseLatestRestorableAutoSnapshot">
            <summary>
            <para>
            <para>A Boolean value to indicate whether to use the latest available automatic snapshot.</para><para>Constraints:</para><ul><li><para>This parameter cannot be defined together with the <c>restore date</c> parameter.
            The <c>use latest restorable auto snapshot</c> and <c>restore date</c> parameters
            are mutually exclusive.</para></li><li><para>Define this parameter only when creating a new disk from an automatic snapshot. For
            more information, see the <a href="https://lightsail.aws.amazon.com/ls/docs/en_us/articles/amazon-lightsail-configuring-automatic-snapshots">Amazon
            Lightsail Developer Guide</a>.</para></li></ul>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSDiskFromSnapshotCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Operations'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.CreateDiskFromSnapshotResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.CreateDiskFromSnapshotResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSDiskFromSnapshotCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the DiskSnapshotName parameter.
            The -PassThru parameter is deprecated, use -Select '^DiskSnapshotName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSDiskFromSnapshotCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.NewLSDiskSnapshotCmdlet">
            <summary>
            Creates a snapshot of a block storage disk. You can use snapshots for backups, to
            make copies of disks, and to save data before shutting down a Lightsail instance.
             
              
            <para>
            You can take a snapshot of an attached disk that is in use; however, snapshots only
            capture data that has been written to your disk at the time the snapshot command is
            issued. This may exclude any data that has been cached by any applications or the
            operating system. If you can pause any file systems on the disk long enough to take
            a snapshot, your snapshot should be complete. Nevertheless, if you cannot pause all
            file writes to the disk, you should unmount the disk from within the Lightsail instance,
            issue the create disk snapshot command, and then remount the disk to ensure a consistent
            and complete snapshot. You may remount and use your disk while the snapshot status
            is pending.
            </para><para>
            You can also use this operation to create a snapshot of an instance's system volume.
            You might want to do this, for example, to recover data from the system volume of
            a botched instance or to create a backup of the system volume like you would for a
            block storage disk. To create a snapshot of a system volume, just define the <c>instance
            name</c> parameter when issuing the snapshot command, and a snapshot of the defined
            instance's system volume will be created. After the snapshot is available, you can
            create a block storage disk from the snapshot and attach it to a running instance
            to access the data on the disk.
            </para><para>
            The <c>create disk snapshot</c> operation supports tag-based access control via request
            tags. For more information, see the <a href="https://lightsail.aws.amazon.com/ls/docs/en_us/articles/amazon-lightsail-controlling-access-using-tags">Amazon
            Lightsail Developer Guide</a>.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSDiskSnapshotCmdlet.DiskName">
            <summary>
            <para>
            <para>The unique name of the source disk (<c>Disk-Virginia-1</c>).</para><note><para>This parameter cannot be defined together with the <c>instance name</c> parameter.
            The <c>disk name</c> and <c>instance name</c> parameters are mutually exclusive.</para></note>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSDiskSnapshotCmdlet.DiskSnapshotName">
            <summary>
            <para>
            <para>The name of the destination disk snapshot (<c>my-disk-snapshot</c>) based on the source
            disk.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSDiskSnapshotCmdlet.InstanceName">
            <summary>
            <para>
            <para>The unique name of the source instance (<c>Amazon_Linux-512MB-Virginia-1</c>). When
            this is defined, a snapshot of the instance's system volume is created.</para><note><para>This parameter cannot be defined together with the <c>disk name</c> parameter. The
            <c>instance name</c> and <c>disk name</c> parameters are mutually exclusive.</para></note>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSDiskSnapshotCmdlet.Tag">
            <summary>
            <para>
            <para>The tag keys and optional values to add to the resource during create.</para><para>Use the <c>TagResource</c> action to tag a resource after it's created.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSDiskSnapshotCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Operations'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.CreateDiskSnapshotResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.CreateDiskSnapshotResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSDiskSnapshotCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the DiskSnapshotName parameter.
            The -PassThru parameter is deprecated, use -Select '^DiskSnapshotName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSDiskSnapshotCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.NewLSDistributionCmdlet">
            <summary>
            Creates an Amazon Lightsail content delivery network (CDN) distribution.
             
              
            <para>
            A distribution is a globally distributed network of caching servers that improve the
            performance of your website or web application hosted on a Lightsail instance. For
            more information, see <a href="https://lightsail.aws.amazon.com/ls/docs/en_us/articles/amazon-lightsail-content-delivery-network-distributions">Content
            delivery networks in Amazon Lightsail</a>.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSDistributionCmdlet.CacheBehaviorSettings_AllowedHTTPMethod">
            <summary>
            <para>
            <para>The HTTP methods that are processed and forwarded to the distribution's origin.</para><para>You can specify the following options:</para><ul><li><para><c>GET,HEAD</c> - The distribution forwards the <c>GET</c> and <c>HEAD</c> methods.</para></li><li><para><c>GET,HEAD,OPTIONS</c> - The distribution forwards the <c>GET</c>, <c>HEAD</c>,
            and <c>OPTIONS</c> methods.</para></li><li><para><c>GET,HEAD,OPTIONS,PUT,PATCH,POST,DELETE</c> - The distribution forwards the <c>GET</c>,
            <c>HEAD</c>, <c>OPTIONS</c>, <c>PUT</c>, <c>PATCH</c>, <c>POST</c>, and <c>DELETE</c>
            methods.</para></li></ul><para>If you specify the third option, you might need to restrict access to your distribution's
            origin so users can't perform operations that you don't want them to. For example,
            you might not want users to have permission to delete objects from your origin.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSDistributionCmdlet.DefaultCacheBehavior_Behavior">
            <summary>
            <para>
            <para>The cache behavior of the distribution.</para><para>The following cache behaviors can be specified:</para><ul><li><para><b><c>cache</c></b> - This option is best for static sites. When specified, your
            distribution caches and serves your entire website as static content. This behavior
            is ideal for websites with static content that doesn't change depending on who views
            it, or for websites that don't use cookies, headers, or query strings to personalize
            content.</para></li><li><para><b><c>dont-cache</c></b> - This option is best for sites that serve a mix of static
            and dynamic content. When specified, your distribution caches and serve only the content
            that is specified in the distribution's <c>CacheBehaviorPerPath</c> parameter. This
            behavior is ideal for websites or web applications that use cookies, headers, and
            query strings to personalize content for individual users.</para></li></ul>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSDistributionCmdlet.BundleId">
            <summary>
            <para>
            <para>The bundle ID to use for the distribution.</para><para>A distribution bundle describes the specifications of your distribution, such as the
            monthly cost and monthly network transfer quota.</para><para>Use the <c>GetDistributionBundles</c> action to get a list of distribution bundle
            IDs that you can specify.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSDistributionCmdlet.CacheBehavior">
            <summary>
            <para>
            <para>An array of objects that describe the per-path cache behavior for the distribution.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSDistributionCmdlet.CacheBehaviorSettings_CachedHTTPMethod">
            <summary>
            <para>
            <para>The HTTP method responses that are cached by your distribution.</para><para>You can specify the following options:</para><ul><li><para><c>GET,HEAD</c> - The distribution caches responses to the <c>GET</c> and <c>HEAD</c>
            methods.</para></li><li><para><c>GET,HEAD,OPTIONS</c> - The distribution caches responses to the <c>GET</c>, <c>HEAD</c>,
            and <c>OPTIONS</c> methods.</para></li></ul>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSDistributionCmdlet.CertificateName">
            <summary>
            <para>
            <para>The name of the SSL/TLS certificate that you want to attach to the distribution.</para><para>Use the <a href="https://docs.aws.amazon.com/lightsail/2016-11-28/api-reference/API_GetCertificates.html">GetCertificates</a>
            action to get a list of certificate names that you can specify.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSDistributionCmdlet.ForwardedCookies_CookiesAllowList">
            <summary>
            <para>
            <para>The specific cookies to forward to your distribution's origin.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSDistributionCmdlet.CacheBehaviorSettings_DefaultTTL">
            <summary>
            <para>
            <para>The default amount of time that objects stay in the distribution's cache before the
            distribution forwards another request to the origin to determine whether the content
            has been updated.</para><note><para>The value specified applies only when the origin does not add HTTP headers such as
            <c>Cache-Control max-age</c>, <c>Cache-Control s-maxage</c>, and <c>Expires</c> to
            objects.</para></note>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSDistributionCmdlet.DistributionName">
            <summary>
            <para>
            <para>The name for the distribution.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSDistributionCmdlet.ForwardedHeaders_HeadersAllowList">
            <summary>
            <para>
            <para>The specific headers to forward to your distribution's origin.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSDistributionCmdlet.IpAddressType">
            <summary>
            <para>
            <para>The IP address type for the distribution.</para><para>The possible values are <c>ipv4</c> for IPv4 only, and <c>dualstack</c> for IPv4 and
            IPv6.</para><para>The default value is <c>dualstack</c>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSDistributionCmdlet.CacheBehaviorSettings_MaximumTTL">
            <summary>
            <para>
            <para>The maximum amount of time that objects stay in the distribution's cache before the
            distribution forwards another request to the origin to determine whether the object
            has been updated.</para><para>The value specified applies only when the origin adds HTTP headers such as <c>Cache-Control
            max-age</c>, <c>Cache-Control s-maxage</c>, and <c>Expires</c> to objects.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSDistributionCmdlet.CacheBehaviorSettings_MinimumTTL">
            <summary>
            <para>
            <para>The minimum amount of time that objects stay in the distribution's cache before the
            distribution forwards another request to the origin to determine whether the object
            has been updated.</para><para>A value of <c>0</c> must be specified for <c>minimumTTL</c> if the distribution is
            configured to forward all headers to the origin.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSDistributionCmdlet.Origin_Name">
            <summary>
            <para>
            <para>The name of the origin resource.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSDistributionCmdlet.ForwardedCookies_Option">
            <summary>
            <para>
            <para>Specifies which cookies to forward to the distribution's origin for a cache behavior:
            <c>all</c>, <c>none</c>, or <c>allow-list</c> to forward only the cookies specified
            in the <c>cookiesAllowList</c> parameter.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSDistributionCmdlet.ForwardedHeaders_Option">
            <summary>
            <para>
            <para>The headers that you want your distribution to forward to your origin and base caching
            on.</para><para>You can configure your distribution to do one of the following:</para><ul><li><para><b><c>all</c></b> - Forward all headers to your origin.</para></li><li><para><b><c>none</c></b> - Forward only the default headers.</para></li><li><para><b><c>allow-list</c></b> - Forward only the headers you specify using the <c>headersAllowList</c>
            parameter.</para></li></ul>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSDistributionCmdlet.ForwardedQueryStrings_Option">
            <summary>
            <para>
            <para>Indicates whether the distribution forwards and caches based on query strings.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSDistributionCmdlet.Origin_ProtocolPolicy">
            <summary>
            <para>
            <para>The protocol that your Amazon Lightsail distribution uses when establishing a connection
            with your origin to pull content.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSDistributionCmdlet.ForwardedQueryStrings_QueryStringsAllowList">
            <summary>
            <para>
            <para>The specific query strings that the distribution forwards to the origin.</para><para>Your distribution will cache content based on the specified query strings.</para><para>If the <c>option</c> parameter is true, then your distribution forwards all query
            strings, regardless of what you specify using the <c>queryStringsAllowList</c> parameter.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSDistributionCmdlet.Origin_RegionName">
            <summary>
            <para>
            <para>The AWS Region name of the origin resource.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSDistributionCmdlet.Origin_ResponseTimeout">
            <summary>
            <para>
            <para>The amount of time, in seconds, that the distribution waits for a response after forwarding
            a request to the origin. The minimum timeout is 1 second, the maximum is 60 seconds,
            and the default (if you don't specify otherwise) is 30 seconds.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSDistributionCmdlet.Tag">
            <summary>
            <para>
            <para>The tag keys and optional values to add to the distribution during create.</para><para>Use the <c>TagResource</c> action to tag a resource after it's created.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSDistributionCmdlet.ViewerMinimumTlsProtocolVersion">
            <summary>
            <para>
            <para>The minimum TLS protocol version for the SSL/TLS certificate.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSDistributionCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is '*'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.CreateDistributionResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.CreateDistributionResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSDistributionCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the DistributionName parameter.
            The -PassThru parameter is deprecated, use -Select '^DistributionName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSDistributionCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.NewLSDomainCmdlet">
            <summary>
            Creates a domain resource for the specified domain (example.com).
             
              
            <para>
            The <c>create domain</c> operation supports tag-based access control via request tags.
            For more information, see the <a href="https://lightsail.aws.amazon.com/ls/docs/en_us/articles/amazon-lightsail-controlling-access-using-tags">Amazon
            Lightsail Developer Guide</a>.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSDomainCmdlet.DomainName">
            <summary>
            <para>
            <para>The domain name to manage (<c>example.com</c>).</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSDomainCmdlet.Tag">
            <summary>
            <para>
            <para>The tag keys and optional values to add to the resource during create.</para><para>Use the <c>TagResource</c> action to tag a resource after it's created.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSDomainCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Operation'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.CreateDomainResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.CreateDomainResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSDomainCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the DomainName parameter.
            The -PassThru parameter is deprecated, use -Select '^DomainName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSDomainCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.NewLSDomainEntryCmdlet">
            <summary>
            Creates one of the following domain name system (DNS) records in a domain DNS zone:
            Address (A), canonical name (CNAME), mail exchanger (MX), name server (NS), start
            of authority (SOA), service locator (SRV), or text (TXT).
             
              
            <para>
            The <c>create domain entry</c> operation supports tag-based access control via resource
            tags applied to the resource identified by <c>domain name</c>. For more information,
            see the <a href="https://lightsail.aws.amazon.com/ls/docs/en_us/articles/amazon-lightsail-controlling-access-using-tags">Amazon
            Lightsail Developer Guide</a>.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSDomainEntryCmdlet.DomainName">
            <summary>
            <para>
            <para>The domain name (<c>example.com</c>) for which you want to create the domain entry.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSDomainEntryCmdlet.DomainEntry_Id">
            <summary>
            <para>
            <para>The ID of the domain recordset entry.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSDomainEntryCmdlet.DomainEntry_IsAlias">
            <summary>
            <para>
            <para>When <c>true</c>, specifies whether the domain entry is an alias used by the Lightsail
            load balancer, Lightsail container service, Lightsail content delivery network (CDN)
            distribution, or another Amazon Web Services resource. You can include an alias (A
            type) record in your request, which points to the DNS name of a load balancer, container
            service, CDN distribution, or other Amazon Web Services resource and routes traffic
            to that resource.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSDomainEntryCmdlet.DomainEntry_Name">
            <summary>
            <para>
            <para>The name of the domain.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSDomainEntryCmdlet.DomainEntry_Target">
            <summary>
            <para>
            <para>The target IP address (<c>192.0.2.0</c>), or AWS name server (<c>ns-111.awsdns-22.com.</c>).</para><para>For Lightsail load balancers, the value looks like <c>ab1234c56789c6b86aba6fb203d443bc-123456789.us-east-2.elb.amazonaws.com</c>.
            For Lightsail distributions, the value looks like <c>exampled1182ne.cloudfront.net</c>.
            For Lightsail container services, the value looks like <c>container-service-1.example23scljs.us-west-2.cs.amazonlightsail.com</c>.
            Be sure to also set <c>isAlias</c> to <c>true</c> when setting up an A record for
            a Lightsail load balancer, distribution, or container service.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSDomainEntryCmdlet.DomainEntry_Type">
            <summary>
            <para>
            <para>The type of domain entry, such as address for IPv4 (A), address for IPv6 (AAAA), canonical
            name (CNAME), mail exchanger (MX), name server (NS), start of authority (SOA), service
            locator (SRV), or text (TXT).</para><para>The following domain entry types can be used:</para><ul><li><para><c>A</c></para></li><li><para><c>AAAA</c></para></li><li><para><c>CNAME</c></para></li><li><para><c>MX</c></para></li><li><para><c>NS</c></para></li><li><para><c>SOA</c></para></li><li><para><c>SRV</c></para></li><li><para><c>TXT</c></para></li></ul>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSDomainEntryCmdlet.DomainEntry_Option">
            <summary>
            <para>
            <para>(Discontinued) The options for the domain entry.</para><note><para>In releases prior to November 29, 2017, this parameter was not included in the API
            response. It is now discontinued.</para></note>
            </para>
            <para>This parameter is deprecated.</para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSDomainEntryCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Operation'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.CreateDomainEntryResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.CreateDomainEntryResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSDomainEntryCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the DomainName parameter.
            The -PassThru parameter is deprecated, use -Select '^DomainName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSDomainEntryCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.NewLSGUISessionAccessDetailCmdlet">
            <summary>
            Creates two URLs that are used to access a virtual computer’s graphical user interface
            (GUI) session. The primary URL initiates a web-based NICE DCV session to the virtual
            computer's application. The secondary URL initiates a web-based NICE DCV session to
            the virtual computer's operating session.
             
              
            <para>
            Use <c>StartGUISession</c> to open the session.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSGUISessionAccessDetailCmdlet.ResourceName">
            <summary>
            <para>
            <para>The resource name.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSGUISessionAccessDetailCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is '*'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.CreateGUISessionAccessDetailsResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.CreateGUISessionAccessDetailsResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSGUISessionAccessDetailCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the ResourceName parameter.
            The -PassThru parameter is deprecated, use -Select '^ResourceName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSGUISessionAccessDetailCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.NewLSInstanceCmdlet">
            <summary>
            Creates one or more Amazon Lightsail instances.
             
              
            <para>
            The <c>create instances</c> operation supports tag-based access control via request
            tags. For more information, see the <a href="https://lightsail.aws.amazon.com/ls/docs/en_us/articles/amazon-lightsail-controlling-access-using-tags">Lightsail
            Developer Guide</a>.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSInstanceCmdlet.AddOn">
            <summary>
            <para>
            <para>An array of objects representing the add-ons to enable for the new instance.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSInstanceCmdlet.AvailabilityZone">
            <summary>
            <para>
            <para>The Availability Zone in which to create your instance. Use the following format:
            <c>us-east-2a</c> (case sensitive). You can get a list of Availability Zones by using
            the <a href="http://docs.aws.amazon.com/lightsail/2016-11-28/api-reference/API_GetRegions.html">get
            regions</a> operation. Be sure to add the <c>include Availability Zones</c> parameter
            to your request.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSInstanceCmdlet.BlueprintId">
            <summary>
            <para>
            <para>The ID for a virtual private server image (<c>app_wordpress_x_x</c> or <c>app_lamp_x_x</c>).
            Use the <c>get blueprints</c> operation to return a list of available images (or <i>blueprints</i>).</para><note><para>Use active blueprints when creating new instances. Inactive blueprints are listed
            to support customers with existing instances and are not necessarily available to
            create new instances. Blueprints are marked inactive when they become outdated due
            to operating system updates or new application releases.</para></note>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSInstanceCmdlet.BundleId">
            <summary>
            <para>
            <para>The bundle of specification information for your virtual private server (or <i>instance</i>),
            including the pricing plan (<c>medium_x_x</c>).</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSInstanceCmdlet.InstanceName">
            <summary>
            <para>
            <para>The names to use for your new Lightsail instances. Separate multiple values using
            quotation marks and commas, for example: <c>["MyFirstInstance","MySecondInstance"]</c></para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSInstanceCmdlet.IpAddressType">
            <summary>
            <para>
            <para>The IP address type for the instance.</para><para>The possible values are <c>ipv4</c> for IPv4 only, <c>ipv6</c> for IPv6 only, and
            <c>dualstack</c> for IPv4 and IPv6.</para><para>The default value is <c>dualstack</c>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSInstanceCmdlet.KeyPairName">
            <summary>
            <para>
            <para>The name of your key pair.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSInstanceCmdlet.Tag">
            <summary>
            <para>
            <para>The tag keys and optional values to add to the resource during create.</para><para>Use the <c>TagResource</c> action to tag a resource after it's created.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSInstanceCmdlet.UserData">
            <summary>
            <para>
            <para>A launch script you can create that configures a server with additional user data.
            For example, you might want to run <c>apt-get -y update</c>.</para><note><para>Depending on the machine image you choose, the command to get software on your instance
            varies. Amazon Linux and CentOS use <c>yum</c>, Debian and Ubuntu use <c>apt-get</c>,
            and FreeBSD uses <c>pkg</c>. For a complete list, see the <a href="https://lightsail.aws.amazon.com/ls/docs/en_us/articles/compare-options-choose-lightsail-instance-image">Amazon
            Lightsail Developer Guide</a>.</para></note>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSInstanceCmdlet.CustomImageName">
            <summary>
            <para>
            <para>(Discontinued) The name for your custom image.</para><note><para>In releases prior to June 12, 2017, this parameter was ignored by the API. It is now
            discontinued.</para></note>
            </para>
            <para>This parameter is deprecated.</para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSInstanceCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Operations'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.CreateInstancesResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.CreateInstancesResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSInstanceCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the InstanceName parameter.
            The -PassThru parameter is deprecated, use -Select '^InstanceName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSInstanceCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.NewLSInstancesFromSnapshotCmdlet">
            <summary>
            Creates one or more new instances from a manual or automatic snapshot of an instance.
             
              
            <para>
            The <c>create instances from snapshot</c> operation supports tag-based access control
            via request tags and resource tags applied to the resource identified by <c>instance
            snapshot name</c>. For more information, see the <a href="https://lightsail.aws.amazon.com/ls/docs/en_us/articles/amazon-lightsail-controlling-access-using-tags">Amazon
            Lightsail Developer Guide</a>.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSInstancesFromSnapshotCmdlet.AddOn">
            <summary>
            <para>
            <para>An array of objects representing the add-ons to enable for the new instance.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSInstancesFromSnapshotCmdlet.AttachedDiskMapping">
            <summary>
            <para>
            <para>An object containing information about one or more disk mappings.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSInstancesFromSnapshotCmdlet.AvailabilityZone">
            <summary>
            <para>
            <para>The Availability Zone where you want to create your instances. Use the following formatting:
            <c>us-east-2a</c> (case sensitive). You can get a list of Availability Zones by using
            the <a href="http://docs.aws.amazon.com/lightsail/2016-11-28/api-reference/API_GetRegions.html">get
            regions</a> operation. Be sure to add the <c>include Availability Zones</c> parameter
            to your request.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSInstancesFromSnapshotCmdlet.BundleId">
            <summary>
            <para>
            <para>The bundle of specification information for your virtual private server (or <i>instance</i>),
            including the pricing plan (<c>micro_x_x</c>).</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSInstancesFromSnapshotCmdlet.InstanceName">
            <summary>
            <para>
            <para>The names for your new instances.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSInstancesFromSnapshotCmdlet.InstanceSnapshotName">
            <summary>
            <para>
            <para>The name of the instance snapshot on which you are basing your new instances. Use
            the get instance snapshots operation to return information about your existing snapshots.</para><para>Constraint:</para><ul><li><para>This parameter cannot be defined together with the <c>source instance name</c> parameter.
            The <c>instance snapshot name</c> and <c>source instance name</c> parameters are mutually
            exclusive.</para></li></ul>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSInstancesFromSnapshotCmdlet.IpAddressType">
            <summary>
            <para>
            <para>The IP address type for the instance.</para><para>The possible values are <c>ipv4</c> for IPv4 only, <c>ipv6</c> for IPv6 only, and
            <c>dualstack</c> for IPv4 and IPv6.</para><para>The default value is <c>dualstack</c>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSInstancesFromSnapshotCmdlet.KeyPairName">
            <summary>
            <para>
            <para>The name for your key pair.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSInstancesFromSnapshotCmdlet.RestoreDate">
            <summary>
            <para>
            <para>The date of the automatic snapshot to use for the new instance. Use the <c>get auto
            snapshots</c> operation to identify the dates of the available automatic snapshots.</para><para>Constraints:</para><ul><li><para>Must be specified in <c>YYYY-MM-DD</c> format.</para></li><li><para>This parameter cannot be defined together with the <c>use latest restorable auto snapshot</c>
            parameter. The <c>restore date</c> and <c>use latest restorable auto snapshot</c>
            parameters are mutually exclusive.</para></li><li><para>Define this parameter only when creating a new instance from an automatic snapshot.
            For more information, see the <a href="https://lightsail.aws.amazon.com/ls/docs/en_us/articles/amazon-lightsail-configuring-automatic-snapshots">Amazon
            Lightsail Developer Guide</a>.</para></li></ul>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSInstancesFromSnapshotCmdlet.SourceInstanceName">
            <summary>
            <para>
            <para>The name of the source instance from which the source automatic snapshot was created.</para><para>Constraints:</para><ul><li><para>This parameter cannot be defined together with the <c>instance snapshot name</c> parameter.
            The <c>source instance name</c> and <c>instance snapshot name</c> parameters are mutually
            exclusive.</para></li><li><para>Define this parameter only when creating a new instance from an automatic snapshot.
            For more information, see the <a href="https://lightsail.aws.amazon.com/ls/docs/en_us/articles/amazon-lightsail-configuring-automatic-snapshots">Amazon
            Lightsail Developer Guide</a>.</para></li></ul>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSInstancesFromSnapshotCmdlet.Tag">
            <summary>
            <para>
            <para>The tag keys and optional values to add to the resource during create.</para><para>Use the <c>TagResource</c> action to tag a resource after it's created.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSInstancesFromSnapshotCmdlet.UseLatestRestorableAutoSnapshot">
            <summary>
            <para>
            <para>A Boolean value to indicate whether to use the latest available automatic snapshot.</para><para>Constraints:</para><ul><li><para>This parameter cannot be defined together with the <c>restore date</c> parameter.
            The <c>use latest restorable auto snapshot</c> and <c>restore date</c> parameters
            are mutually exclusive.</para></li><li><para>Define this parameter only when creating a new instance from an automatic snapshot.
            For more information, see the <a href="https://lightsail.aws.amazon.com/ls/docs/en_us/articles/amazon-lightsail-configuring-automatic-snapshots">Amazon
            Lightsail Developer Guide</a>.</para></li></ul>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSInstancesFromSnapshotCmdlet.UserData">
            <summary>
            <para>
            <para>You can create a launch script that configures a server with additional user data.
            For example, <c>apt-get -y update</c>.</para><note><para>Depending on the machine image you choose, the command to get software on your instance
            varies. Amazon Linux and CentOS use <c>yum</c>, Debian and Ubuntu use <c>apt-get</c>,
            and FreeBSD uses <c>pkg</c>. For a complete list, see the <a href="https://lightsail.aws.amazon.com/ls/docs/en_us/articles/compare-options-choose-lightsail-instance-image">Amazon
            Lightsail Developer Guide</a>.</para></note>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSInstancesFromSnapshotCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Operations'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.CreateInstancesFromSnapshotResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.CreateInstancesFromSnapshotResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSInstancesFromSnapshotCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the InstanceName parameter.
            The -PassThru parameter is deprecated, use -Select '^InstanceName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSInstancesFromSnapshotCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.NewLSInstanceSnapshotCmdlet">
            <summary>
            Creates a snapshot of a specific virtual private server, or <i>instance</i>. You can
            use a snapshot to create a new instance that is based on that snapshot.
             
              
            <para>
            The <c>create instance snapshot</c> operation supports tag-based access control via
            request tags. For more information, see the <a href="https://lightsail.aws.amazon.com/ls/docs/en_us/articles/amazon-lightsail-controlling-access-using-tags">Amazon
            Lightsail Developer Guide</a>.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSInstanceSnapshotCmdlet.InstanceName">
            <summary>
            <para>
            <para>The Lightsail instance on which to base your snapshot.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSInstanceSnapshotCmdlet.InstanceSnapshotName">
            <summary>
            <para>
            <para>The name for your new snapshot.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSInstanceSnapshotCmdlet.Tag">
            <summary>
            <para>
            <para>The tag keys and optional values to add to the resource during create.</para><para>Use the <c>TagResource</c> action to tag a resource after it's created.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSInstanceSnapshotCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Operations'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.CreateInstanceSnapshotResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.CreateInstanceSnapshotResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSInstanceSnapshotCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the InstanceName parameter.
            The -PassThru parameter is deprecated, use -Select '^InstanceName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSInstanceSnapshotCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.NewLSKeyPairCmdlet">
            <summary>
            Creates a custom SSH key pair that you can use with an Amazon Lightsail instance.
             
             <note><para>
            Use the <a href="https://docs.aws.amazon.com/lightsail/2016-11-28/api-reference/API_DownloadDefaultKeyPair.html">DownloadDefaultKeyPair</a>
            action to create a Lightsail default key pair in an Amazon Web Services Region where
            a default key pair does not currently exist.
            </para></note><para>
            The <c>create key pair</c> operation supports tag-based access control via request
            tags. For more information, see the <a href="https://lightsail.aws.amazon.com/ls/docs/en_us/articles/amazon-lightsail-controlling-access-using-tags">Amazon
            Lightsail Developer Guide</a>.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSKeyPairCmdlet.KeyPairName">
            <summary>
            <para>
            <para>The name for your new key pair.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSKeyPairCmdlet.Tag">
            <summary>
            <para>
            <para>The tag keys and optional values to add to the resource during create.</para><para>Use the <c>TagResource</c> action to tag a resource after it's created.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSKeyPairCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is '*'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.CreateKeyPairResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.CreateKeyPairResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSKeyPairCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the KeyPairName parameter.
            The -PassThru parameter is deprecated, use -Select '^KeyPairName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSKeyPairCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.NewLSLoadBalancerCmdlet">
            <summary>
            Creates a Lightsail load balancer. To learn more about deciding whether to load balance
            your application, see <a href="https://lightsail.aws.amazon.com/ls/docs/en_us/articles/configure-lightsail-instances-for-load-balancing">Configure
            your Lightsail instances for load balancing</a>. You can create up to 5 load balancers
            per AWS Region in your account.
             
              
            <para>
            When you create a load balancer, you can specify a unique name and port settings.
            To change additional load balancer settings, use the <c>UpdateLoadBalancerAttribute</c>
            operation.
            </para><para>
            The <c>create load balancer</c> operation supports tag-based access control via request
            tags. For more information, see the <a href="https://lightsail.aws.amazon.com/ls/docs/en_us/articles/amazon-lightsail-controlling-access-using-tags">Amazon
            Lightsail Developer Guide</a>.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSLoadBalancerCmdlet.CertificateAlternativeName">
            <summary>
            <para>
            <para>The optional alternative domains and subdomains to use with your SSL/TLS certificate
            (<c>www.example.com</c>, <c>example.com</c>, <c>m.example.com</c>, <c>blog.example.com</c>).</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSLoadBalancerCmdlet.CertificateDomainName">
            <summary>
            <para>
            <para>The domain name with which your certificate is associated (<c>example.com</c>).</para><para>If you specify <c>certificateDomainName</c>, then <c>certificateName</c> is required
            (and vice-versa).</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSLoadBalancerCmdlet.CertificateName">
            <summary>
            <para>
            <para>The name of the SSL/TLS certificate.</para><para>If you specify <c>certificateName</c>, then <c>certificateDomainName</c> is required
            (and vice-versa).</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSLoadBalancerCmdlet.HealthCheckPath">
            <summary>
            <para>
            <para>The path you provided to perform the load balancer health check. If you didn't specify
            a health check path, Lightsail uses the root path of your website (<c>"/"</c>).</para><para>You may want to specify a custom health check path other than the root of your application
            if your home page loads slowly or has a lot of media or scripting on it.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSLoadBalancerCmdlet.InstancePort">
            <summary>
            <para>
            <para>The instance port where you're creating your load balancer.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSLoadBalancerCmdlet.IpAddressType">
            <summary>
            <para>
            <para>The IP address type for the load balancer.</para><para>The possible values are <c>ipv4</c> for IPv4 only, <c>ipv6</c> for IPv6 only, and
            <c>dualstack</c> for IPv4 and IPv6.</para><para>The default value is <c>dualstack</c>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSLoadBalancerCmdlet.LoadBalancerName">
            <summary>
            <para>
            <para>The name of your load balancer.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSLoadBalancerCmdlet.Tag">
            <summary>
            <para>
            <para>The tag keys and optional values to add to the resource during create.</para><para>Use the <c>TagResource</c> action to tag a resource after it's created.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSLoadBalancerCmdlet.TlsPolicyName">
            <summary>
            <para>
            <para>The name of the TLS policy to apply to the load balancer.</para><para>Use the <a href="https://docs.aws.amazon.com/lightsail/2016-11-28/api-reference/API_GetLoadBalancerTlsPolicies.html">GetLoadBalancerTlsPolicies</a>
            action to get a list of TLS policy names that you can specify.</para><para>For more information about load balancer TLS policies, see <a href="https://lightsail.aws.amazon.com/ls/docs/en_us/articles/amazon-lightsail-configure-load-balancer-tls-security-policy">Configuring
            TLS security policies on your Amazon Lightsail load balancers</a> in the <i>Amazon
            Lightsail Developer Guide</i>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSLoadBalancerCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Operations'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.CreateLoadBalancerResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.CreateLoadBalancerResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSLoadBalancerCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the LoadBalancerName parameter.
            The -PassThru parameter is deprecated, use -Select '^LoadBalancerName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSLoadBalancerCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.NewLSLoadBalancerTlsCertificateCmdlet">
            <summary>
            Creates an SSL/TLS certificate for an Amazon Lightsail load balancer.
             
              
            <para>
            TLS is just an updated, more secure version of Secure Socket Layer (SSL).
            </para><para>
            The <c>CreateLoadBalancerTlsCertificate</c> operation supports tag-based access control
            via resource tags applied to the resource identified by <c>load balancer name</c>.
            For more information, see the <a href="https://lightsail.aws.amazon.com/ls/docs/en_us/articles/amazon-lightsail-controlling-access-using-tags">Amazon
            Lightsail Developer Guide</a>.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSLoadBalancerTlsCertificateCmdlet.CertificateAlternativeName">
            <summary>
            <para>
            <para>An array of strings listing alternative domains and subdomains for your SSL/TLS certificate.
            Lightsail will de-dupe the names for you. You can have a maximum of 9 alternative
            names (in addition to the 1 primary domain). We do not support wildcards (<c>*.example.com</c>).</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSLoadBalancerTlsCertificateCmdlet.CertificateDomainName">
            <summary>
            <para>
            <para>The domain name (<c>example.com</c>) for your SSL/TLS certificate.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSLoadBalancerTlsCertificateCmdlet.CertificateName">
            <summary>
            <para>
            <para>The SSL/TLS certificate name.</para><para>You can have up to 10 certificates in your account at one time. Each Lightsail load
            balancer can have up to 2 certificates associated with it at one time. There is also
            an overall limit to the number of certificates that can be issue in a 365-day period.
            For more information, see <a href="http://docs.aws.amazon.com/acm/latest/userguide/acm-limits.html">Limits</a>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSLoadBalancerTlsCertificateCmdlet.LoadBalancerName">
            <summary>
            <para>
            <para>The load balancer name where you want to create the SSL/TLS certificate.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSLoadBalancerTlsCertificateCmdlet.Tag">
            <summary>
            <para>
            <para>The tag keys and optional values to add to the resource during create.</para><para>Use the <c>TagResource</c> action to tag a resource after it's created.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSLoadBalancerTlsCertificateCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Operations'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.CreateLoadBalancerTlsCertificateResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.CreateLoadBalancerTlsCertificateResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSLoadBalancerTlsCertificateCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the CertificateName parameter.
            The -PassThru parameter is deprecated, use -Select '^CertificateName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSLoadBalancerTlsCertificateCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.NewLSRelationalDatabaseCmdlet">
            <summary>
            Creates a new database in Amazon Lightsail.
             
              
            <para>
            The <c>create relational database</c> operation supports tag-based access control
            via request tags. For more information, see the <a href="https://lightsail.aws.amazon.com/ls/docs/en_us/articles/amazon-lightsail-controlling-access-using-tags">Amazon
            Lightsail Developer Guide</a>.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSRelationalDatabaseCmdlet.AvailabilityZone">
            <summary>
            <para>
            <para>The Availability Zone in which to create your new database. Use the <c>us-east-2a</c>
            case-sensitive format.</para><para>You can get a list of Availability Zones by using the <c>get regions</c> operation.
            Be sure to add the <c>include relational database Availability Zones</c> parameter
            to your request.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSRelationalDatabaseCmdlet.MasterDatabaseName">
            <summary>
            <para>
            <para>The meaning of this parameter differs according to the database engine you use.</para><para><b>MySQL</b></para><para>The name of the database to create when the Lightsail database resource is created.
            If this parameter isn't specified, no database is created in the database resource.</para><para>Constraints:</para><ul><li><para>Must contain 1 to 64 letters or numbers.</para></li><li><para>Must begin with a letter. Subsequent characters can be letters, underscores, or digits
            (0- 9).</para></li><li><para>Can't be a word reserved by the specified database engine.</para><para>For more information about reserved words in MySQL, see the Keywords and Reserved
            Words articles for <a href="https://dev.mysql.com/doc/refman/5.6/en/keywords.html">MySQL
            5.6</a>, <a href="https://dev.mysql.com/doc/refman/5.7/en/keywords.html">MySQL 5.7</a>,
            and <a href="https://dev.mysql.com/doc/refman/8.0/en/keywords.html">MySQL 8.0</a>.</para></li></ul><para><b>PostgreSQL</b></para><para>The name of the database to create when the Lightsail database resource is created.
            If this parameter isn't specified, a database named <c>postgres</c> is created in
            the database resource.</para><para>Constraints:</para><ul><li><para>Must contain 1 to 63 letters or numbers.</para></li><li><para>Must begin with a letter. Subsequent characters can be letters, underscores, or digits
            (0- 9).</para></li><li><para>Can't be a word reserved by the specified database engine.</para><para>For more information about reserved words in PostgreSQL, see the SQL Key Words articles
            for <a href="https://www.postgresql.org/docs/9.6/sql-keywords-appendix.html">PostgreSQL
            9.6</a>, <a href="https://www.postgresql.org/docs/10/sql-keywords-appendix.html">PostgreSQL
            10</a>, <a href="https://www.postgresql.org/docs/11/sql-keywords-appendix.html">PostgreSQL
            11</a>, and <a href="https://www.postgresql.org/docs/12/sql-keywords-appendix.html">PostgreSQL
            12</a>.</para></li></ul>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSRelationalDatabaseCmdlet.MasterUsername">
            <summary>
            <para>
            <para>The name for the master user.</para><para><b>MySQL</b></para><para>Constraints:</para><ul><li><para>Required for MySQL.</para></li><li><para>Must be 1 to 16 letters or numbers. Can contain underscores.</para></li><li><para>First character must be a letter.</para></li><li><para>Can't be a reserved word for the chosen database engine.</para><para>For more information about reserved words in MySQL 5.6 or 5.7, see the Keywords and
            Reserved Words articles for <a href="https://dev.mysql.com/doc/refman/5.6/en/keywords.html">MySQL
            5.6</a>, <a href="https://dev.mysql.com/doc/refman/5.7/en/keywords.html">MySQL 5.7</a>,
            or <a href="https://dev.mysql.com/doc/refman/8.0/en/keywords.html">MySQL 8.0</a>.</para></li></ul><para><b>PostgreSQL</b></para><para>Constraints:</para><ul><li><para>Required for PostgreSQL.</para></li><li><para>Must be 1 to 63 letters or numbers. Can contain underscores.</para></li><li><para>First character must be a letter.</para></li><li><para>Can't be a reserved word for the chosen database engine.</para><para>For more information about reserved words in MySQL 5.6 or 5.7, see the Keywords and
            Reserved Words articles for <a href="https://www.postgresql.org/docs/9.6/sql-keywords-appendix.html">PostgreSQL
            9.6</a>, <a href="https://www.postgresql.org/docs/10/sql-keywords-appendix.html">PostgreSQL
            10</a>, <a href="https://www.postgresql.org/docs/11/sql-keywords-appendix.html">PostgreSQL
            11</a>, and <a href="https://www.postgresql.org/docs/12/sql-keywords-appendix.html">PostgreSQL
            12</a>.</para></li></ul>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSRelationalDatabaseCmdlet.MasterUserPassword">
            <summary>
            <para>
            <para>The password for the master user. The password can include any printable ASCII character
            except "/", """, or "@". It cannot contain spaces.</para><para><b>MySQL</b></para><para>Constraints: Must contain from 8 to 41 characters.</para><para><b>PostgreSQL</b></para><para>Constraints: Must contain from 8 to 128 characters.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSRelationalDatabaseCmdlet.PreferredBackupWindow">
            <summary>
            <para>
            <para>The daily time range during which automated backups are created for your new database
            if automated backups are enabled.</para><para>The default is a 30-minute window selected at random from an 8-hour block of time
            for each AWS Region. For more information about the preferred backup window time blocks
            for each region, see the <a href="https://docs.aws.amazon.com/AmazonRDS/latest/UserGuide/USER_WorkingWithAutomatedBackups.html#USER_WorkingWithAutomatedBackups.BackupWindow">Working
            With Backups</a> guide in the Amazon Relational Database Service documentation.</para><para>Constraints:</para><ul><li><para>Must be in the <c>hh24:mi-hh24:mi</c> format.</para><para>Example: <c>16:00-16:30</c></para></li><li><para>Specified in Coordinated Universal Time (UTC).</para></li><li><para>Must not conflict with the preferred maintenance window.</para></li><li><para>Must be at least 30 minutes.</para></li></ul>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSRelationalDatabaseCmdlet.PreferredMaintenanceWindow">
            <summary>
            <para>
            <para>The weekly time range during which system maintenance can occur on your new database.</para><para>The default is a 30-minute window selected at random from an 8-hour block of time
            for each AWS Region, occurring on a random day of the week.</para><para>Constraints:</para><ul><li><para>Must be in the <c>ddd:hh24:mi-ddd:hh24:mi</c> format.</para></li><li><para>Valid days: Mon, Tue, Wed, Thu, Fri, Sat, Sun.</para></li><li><para>Must be at least 30 minutes.</para></li><li><para>Specified in Coordinated Universal Time (UTC).</para></li><li><para>Example: <c>Tue:17:00-Tue:17:30</c></para></li></ul>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSRelationalDatabaseCmdlet.PubliclyAccessible">
            <summary>
            <para>
            <para>Specifies the accessibility options for your new database. A value of <c>true</c>
            specifies a database that is available to resources outside of your Lightsail account.
            A value of <c>false</c> specifies a database that is available only to your Lightsail
            resources in the same region as your database.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSRelationalDatabaseCmdlet.RelationalDatabaseBlueprintId">
            <summary>
            <para>
            <para>The blueprint ID for your new database. A blueprint describes the major engine version
            of a database.</para><para>You can get a list of database blueprints IDs by using the <c>get relational database
            blueprints</c> operation.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSRelationalDatabaseCmdlet.RelationalDatabaseBundleId">
            <summary>
            <para>
            <para>The bundle ID for your new database. A bundle describes the performance specifications
            for your database.</para><para>You can get a list of database bundle IDs by using the <c>get relational database
            bundles</c> operation.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSRelationalDatabaseCmdlet.RelationalDatabaseName">
            <summary>
            <para>
            <para>The name to use for your new Lightsail database resource.</para><para>Constraints:</para><ul><li><para>Must contain from 2 to 255 alphanumeric characters, or hyphens.</para></li><li><para>The first and last character must be a letter or number.</para></li></ul>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSRelationalDatabaseCmdlet.Tag">
            <summary>
            <para>
            <para>The tag keys and optional values to add to the resource during create.</para><para>Use the <c>TagResource</c> action to tag a resource after it's created.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSRelationalDatabaseCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Operations'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.CreateRelationalDatabaseResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.CreateRelationalDatabaseResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSRelationalDatabaseCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the RelationalDatabaseName parameter.
            The -PassThru parameter is deprecated, use -Select '^RelationalDatabaseName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSRelationalDatabaseCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.NewLSRelationalDatabaseFromSnapshotCmdlet">
            <summary>
            Creates a new database from an existing database snapshot in Amazon Lightsail.
             
              
            <para>
            You can create a new database from a snapshot in if something goes wrong with your
            original database, or to change it to a different plan, such as a high availability
            or standard plan.
            </para><para>
            The <c>create relational database from snapshot</c> operation supports tag-based access
            control via request tags and resource tags applied to the resource identified by relationalDatabaseSnapshotName.
            For more information, see the <a href="https://lightsail.aws.amazon.com/ls/docs/en_us/articles/amazon-lightsail-controlling-access-using-tags">Amazon
            Lightsail Developer Guide</a>.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSRelationalDatabaseFromSnapshotCmdlet.AvailabilityZone">
            <summary>
            <para>
            <para>The Availability Zone in which to create your new database. Use the <c>us-east-2a</c>
            case-sensitive format.</para><para>You can get a list of Availability Zones by using the <c>get regions</c> operation.
            Be sure to add the <c>include relational database Availability Zones</c> parameter
            to your request.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSRelationalDatabaseFromSnapshotCmdlet.PubliclyAccessible">
            <summary>
            <para>
            <para>Specifies the accessibility options for your new database. A value of <c>true</c>
            specifies a database that is available to resources outside of your Lightsail account.
            A value of <c>false</c> specifies a database that is available only to your Lightsail
            resources in the same region as your database.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSRelationalDatabaseFromSnapshotCmdlet.RelationalDatabaseBundleId">
            <summary>
            <para>
            <para>The bundle ID for your new database. A bundle describes the performance specifications
            for your database.</para><para>You can get a list of database bundle IDs by using the <c>get relational database
            bundles</c> operation.</para><para>When creating a new database from a snapshot, you cannot choose a bundle that is smaller
            than the bundle of the source database.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSRelationalDatabaseFromSnapshotCmdlet.RelationalDatabaseName">
            <summary>
            <para>
            <para>The name to use for your new Lightsail database resource.</para><para>Constraints:</para><ul><li><para>Must contain from 2 to 255 alphanumeric characters, or hyphens.</para></li><li><para>The first and last character must be a letter or number.</para></li></ul>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSRelationalDatabaseFromSnapshotCmdlet.RelationalDatabaseSnapshotName">
            <summary>
            <para>
            <para>The name of the database snapshot from which to create your new database.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSRelationalDatabaseFromSnapshotCmdlet.RestoreTime">
            <summary>
            <para>
            <para>The date and time to restore your database from.</para><para>Constraints:</para><ul><li><para>Must be before the latest restorable time for the database.</para></li><li><para>Cannot be specified if the <c>use latest restorable time</c> parameter is <c>true</c>.</para></li><li><para>Specified in Coordinated Universal Time (UTC).</para></li><li><para>Specified in the Unix time format.</para><para>For example, if you wish to use a restore time of October 1, 2018, at 8 PM UTC, then
            you input <c>1538424000</c> as the restore time.</para></li></ul>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSRelationalDatabaseFromSnapshotCmdlet.SourceRelationalDatabaseName">
            <summary>
            <para>
            <para>The name of the source database.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSRelationalDatabaseFromSnapshotCmdlet.Tag">
            <summary>
            <para>
            <para>The tag keys and optional values to add to the resource during create.</para><para>Use the <c>TagResource</c> action to tag a resource after it's created.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSRelationalDatabaseFromSnapshotCmdlet.UseLatestRestorableTime">
            <summary>
            <para>
            <para>Specifies whether your database is restored from the latest backup time. A value of
            <c>true</c> restores from the latest backup time. </para><para>Default: <c>false</c></para><para>Constraints: Cannot be specified if the <c>restore time</c> parameter is provided.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSRelationalDatabaseFromSnapshotCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Operations'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.CreateRelationalDatabaseFromSnapshotResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.CreateRelationalDatabaseFromSnapshotResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSRelationalDatabaseFromSnapshotCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the RelationalDatabaseName parameter.
            The -PassThru parameter is deprecated, use -Select '^RelationalDatabaseName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSRelationalDatabaseFromSnapshotCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.NewLSRelationalDatabaseSnapshotCmdlet">
            <summary>
            Creates a snapshot of your database in Amazon Lightsail. You can use snapshots for
            backups, to make copies of a database, and to save data before deleting a database.
             
              
            <para>
            The <c>create relational database snapshot</c> operation supports tag-based access
            control via request tags. For more information, see the <a href="https://lightsail.aws.amazon.com/ls/docs/en_us/articles/amazon-lightsail-controlling-access-using-tags">Amazon
            Lightsail Developer Guide</a>.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSRelationalDatabaseSnapshotCmdlet.RelationalDatabaseName">
            <summary>
            <para>
            <para>The name of the database on which to base your new snapshot.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSRelationalDatabaseSnapshotCmdlet.RelationalDatabaseSnapshotName">
            <summary>
            <para>
            <para>The name for your new database snapshot.</para><para>Constraints:</para><ul><li><para>Must contain from 2 to 255 alphanumeric characters, or hyphens.</para></li><li><para>The first and last character must be a letter or number.</para></li></ul>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSRelationalDatabaseSnapshotCmdlet.Tag">
            <summary>
            <para>
            <para>The tag keys and optional values to add to the resource during create.</para><para>Use the <c>TagResource</c> action to tag a resource after it's created.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSRelationalDatabaseSnapshotCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Operations'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.CreateRelationalDatabaseSnapshotResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.CreateRelationalDatabaseSnapshotResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSRelationalDatabaseSnapshotCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the RelationalDatabaseSnapshotName parameter.
            The -PassThru parameter is deprecated, use -Select '^RelationalDatabaseSnapshotName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSRelationalDatabaseSnapshotCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.NewLSStaticIpCmdlet">
            <summary>
            Allocates a static IP address.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSStaticIpCmdlet.StaticIpName">
            <summary>
            <para>
            <para>The name of the static IP address.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSStaticIpCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Operations'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.AllocateStaticIpResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.AllocateStaticIpResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSStaticIpCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the StaticIpName parameter.
            The -PassThru parameter is deprecated, use -Select '^StaticIpName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.NewLSStaticIpCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.OpenLSInstancePublicPortCmdlet">
            <summary>
            Opens ports for a specific Amazon Lightsail instance, and specifies the IP addresses
            allowed to connect to the instance through the ports, and the protocol.
             
              
            <para>
            The <c>OpenInstancePublicPorts</c> action supports tag-based access control via resource
            tags applied to the resource identified by <c>instanceName</c>. For more information,
            see the <a href="https://lightsail.aws.amazon.com/ls/docs/en_us/articles/amazon-lightsail-controlling-access-using-tags">Amazon
            Lightsail Developer Guide</a>.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.OpenLSInstancePublicPortCmdlet.PortInfo_CidrListAlias">
            <summary>
            <para>
            <para>An alias that defines access for a preconfigured range of IP addresses.</para><para>The only alias currently supported is <c>lightsail-connect</c>, which allows IP addresses
            of the browser-based RDP/SSH client in the Lightsail console to connect to your instance.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.OpenLSInstancePublicPortCmdlet.PortInfo_Cidr">
            <summary>
            <para>
            <para>The IPv4 address, or range of IPv4 addresses (in CIDR notation) that are allowed to
            connect to an instance through the ports, and the protocol.</para><note><para>The <c>ipv6Cidrs</c> parameter lists the IPv6 addresses that are allowed to connect
            to an instance.</para></note><para>Examples:</para><ul><li><para>To allow the IP address <c>192.0.2.44</c>, specify <c>192.0.2.44</c> or <c>192.0.2.44/32</c>.
            </para></li><li><para>To allow the IP addresses <c>192.0.2.0</c> to <c>192.0.2.255</c>, specify <c>192.0.2.0/24</c>.</para></li></ul><para>For more information about CIDR block notation, see <a href="https://en.wikipedia.org/wiki/Classless_Inter-Domain_Routing#CIDR_notation">Classless
            Inter-Domain Routing</a> on <i>Wikipedia</i>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.OpenLSInstancePublicPortCmdlet.PortInfo_FromPort">
            <summary>
            <para>
            <para>The first port in a range of open ports on an instance.</para><para>Allowed ports:</para><ul><li><para>TCP and UDP - <c>0</c> to <c>65535</c></para></li><li><para>ICMP - The ICMP type for IPv4 addresses. For example, specify <c>8</c> as the <c>fromPort</c>
            (ICMP type), and <c>-1</c> as the <c>toPort</c> (ICMP code), to enable ICMP Ping.
            For more information, see <a href="https://en.wikipedia.org/wiki/Internet_Control_Message_Protocol#Control_messages">Control
            Messages</a> on <i>Wikipedia</i>.</para></li><li><para>ICMPv6 - The ICMP type for IPv6 addresses. For example, specify <c>128</c> as the
            <c>fromPort</c> (ICMPv6 type), and <c>0</c> as <c>toPort</c> (ICMPv6 code). For more
            information, see <a href="https://en.wikipedia.org/wiki/Internet_Control_Message_Protocol_for_IPv6">Internet
            Control Message Protocol for IPv6</a>.</para></li></ul>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.OpenLSInstancePublicPortCmdlet.InstanceName">
            <summary>
            <para>
            <para>The name of the instance for which to open ports.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.OpenLSInstancePublicPortCmdlet.PortInfo_Ipv6Cidr">
            <summary>
            <para>
            <para>The IPv6 address, or range of IPv6 addresses (in CIDR notation) that are allowed to
            connect to an instance through the ports, and the protocol. Only devices with an IPv6
            address can connect to an instance through IPv6; otherwise, IPv4 should be used.</para><note><para>The <c>cidrs</c> parameter lists the IPv4 addresses that are allowed to connect to
            an instance.</para></note><para>For more information about CIDR block notation, see <a href="https://en.wikipedia.org/wiki/Classless_Inter-Domain_Routing#CIDR_notation">Classless
            Inter-Domain Routing</a> on <i>Wikipedia</i>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.OpenLSInstancePublicPortCmdlet.PortInfo_Protocol">
            <summary>
            <para>
            <para>The IP protocol name.</para><para>The name can be one of the following:</para><ul><li><para><c>tcp</c> - Transmission Control Protocol (TCP) provides reliable, ordered, and
            error-checked delivery of streamed data between applications running on hosts communicating
            by an IP network. If you have an application that doesn't require reliable data stream
            service, use UDP instead.</para></li><li><para><c>all</c> - All transport layer protocol types. For more general information, see
            <a href="https://en.wikipedia.org/wiki/Transport_layer">Transport layer</a> on <i>Wikipedia</i>.</para></li><li><para><c>udp</c> - With User Datagram Protocol (UDP), computer applications can send messages
            (or datagrams) to other hosts on an Internet Protocol (IP) network. Prior communications
            are not required to set up transmission channels or data paths. Applications that
            don't require reliable data stream service can use UDP, which provides a connectionless
            datagram service that emphasizes reduced latency over reliability. If you do require
            reliable data stream service, use TCP instead.</para></li><li><para><c>icmp</c> - Internet Control Message Protocol (ICMP) is used to send error messages
            and operational information indicating success or failure when communicating with
            an instance. For example, an error is indicated when an instance could not be reached.
            When you specify <c>icmp</c> as the <c>protocol</c>, you must specify the ICMP type
            using the <c>fromPort</c> parameter, and ICMP code using the <c>toPort</c> parameter.</para></li><li><para><c>icmp6</c> - Internet Control Message Protocol (ICMP) for IPv6. When you specify
            <c>icmp6</c> as the <c>protocol</c>, you must specify the ICMP type using the <c>fromPort</c>
            parameter, and ICMP code using the <c>toPort</c> parameter.</para></li></ul>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.OpenLSInstancePublicPortCmdlet.PortInfo_ToPort">
            <summary>
            <para>
            <para>The last port in a range of open ports on an instance.</para><para>Allowed ports:</para><ul><li><para>TCP and UDP - <c>0</c> to <c>65535</c></para></li><li><para>ICMP - The ICMP code for IPv4 addresses. For example, specify <c>8</c> as the <c>fromPort</c>
            (ICMP type), and <c>-1</c> as the <c>toPort</c> (ICMP code), to enable ICMP Ping.
            For more information, see <a href="https://en.wikipedia.org/wiki/Internet_Control_Message_Protocol#Control_messages">Control
            Messages</a> on <i>Wikipedia</i>.</para></li><li><para>ICMPv6 - The ICMP code for IPv6 addresses. For example, specify <c>128</c> as the
            <c>fromPort</c> (ICMPv6 type), and <c>0</c> as <c>toPort</c> (ICMPv6 code). For more
            information, see <a href="https://en.wikipedia.org/wiki/Internet_Control_Message_Protocol_for_IPv6">Internet
            Control Message Protocol for IPv6</a>.</para></li></ul>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.OpenLSInstancePublicPortCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Operation'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.OpenInstancePublicPortsResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.OpenInstancePublicPortsResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.OpenLSInstancePublicPortCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the InstanceName parameter.
            The -PassThru parameter is deprecated, use -Select '^InstanceName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.OpenLSInstancePublicPortCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.ReadLSDefaultKeyPairCmdlet">
            <summary>
            Downloads the regional Amazon Lightsail default key pair.
             
              
            <para>
            This action also creates a Lightsail default key pair if a default key pair does not
            currently exist in the Amazon Web Services Region.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.ReadLSDefaultKeyPairCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is '*'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.DownloadDefaultKeyPairResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.DownloadDefaultKeyPairResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.ReadLSDefaultKeyPairCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.RegisterLSContainerImageCmdlet">
            <summary>
            Registers a container image to your Amazon Lightsail container service.
             
             <note><para>
            This action is not required if you install and use the Lightsail Control (lightsailctl)
            plugin to push container images to your Lightsail container service. For more information,
            see <a href="https://lightsail.aws.amazon.com/ls/docs/en_us/articles/amazon-lightsail-pushing-container-images">Pushing
            and managing container images on your Amazon Lightsail container services</a> in the
            <i>Amazon Lightsail Developer Guide</i>.
            </para></note>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RegisterLSContainerImageCmdlet.Digest">
            <summary>
            <para>
            <para>The digest of the container image to be registered.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RegisterLSContainerImageCmdlet.Label">
            <summary>
            <para>
            <para>The label for the container image when it's registered to the container service.</para><para>Use a descriptive label that you can use to track the different versions of your registered
            container images.</para><para>Use the <c>GetContainerImages</c> action to return the container images registered
            to a Lightsail container service. The label is the <c>&lt;imagelabel&gt;</c> portion
            of the following image name example:</para><ul><li><para><c>:container-service-1.&lt;imagelabel&gt;.1</c></para></li></ul><para>If the name of your container service is <c>mycontainerservice</c>, and the label
            that you specify is <c>mystaticwebsite</c>, then the name of the registered container
            image will be <c>:mycontainerservice.mystaticwebsite.1</c>.</para><para>The number at the end of these image name examples represents the version of the registered
            container image. If you push and register another container image to the same Lightsail
            container service, with the same label, then the version number for the new registered
            container image will be <c>2</c>. If you push and register another container image,
            the version number will be <c>3</c>, and so on.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RegisterLSContainerImageCmdlet.ServiceName">
            <summary>
            <para>
            <para>The name of the container service for which to register a container image.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RegisterLSContainerImageCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'ContainerImage'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.RegisterContainerImageResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.RegisterContainerImageResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RegisterLSContainerImageCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the ServiceName parameter.
            The -PassThru parameter is deprecated, use -Select '^ServiceName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RegisterLSContainerImageCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.RemoveLSAlarmCmdlet">
            <summary>
            Deletes an alarm.
             
              
            <para>
            An alarm is used to monitor a single metric for one of your resources. When a metric
            condition is met, the alarm can notify you by email, SMS text message, and a banner
            displayed on the Amazon Lightsail console. For more information, see <a href="https://lightsail.aws.amazon.com/ls/docs/en_us/articles/amazon-lightsail-alarms">Alarms
            in Amazon Lightsail</a>.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RemoveLSAlarmCmdlet.AlarmName">
            <summary>
            <para>
            <para>The name of the alarm to delete.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RemoveLSAlarmCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Operations'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.DeleteAlarmResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.DeleteAlarmResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RemoveLSAlarmCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the AlarmName parameter.
            The -PassThru parameter is deprecated, use -Select '^AlarmName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RemoveLSAlarmCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.RemoveLSAutoSnapshotCmdlet">
            <summary>
            Deletes an automatic snapshot of an instance or disk. For more information, see the
            <a href="https://lightsail.aws.amazon.com/ls/docs/en_us/articles/amazon-lightsail-configuring-automatic-snapshots">Amazon
            Lightsail Developer Guide</a>.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RemoveLSAutoSnapshotCmdlet.Date">
            <summary>
            <para>
            <para>The date of the automatic snapshot to delete in <c>YYYY-MM-DD</c> format. Use the
            <c>get auto snapshots</c> operation to get the available automatic snapshots for a
            resource.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RemoveLSAutoSnapshotCmdlet.ResourceName">
            <summary>
            <para>
            <para>The name of the source instance or disk from which to delete the automatic snapshot.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RemoveLSAutoSnapshotCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Operations'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.DeleteAutoSnapshotResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.DeleteAutoSnapshotResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RemoveLSAutoSnapshotCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the Date parameter.
            The -PassThru parameter is deprecated, use -Select '^Date' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RemoveLSAutoSnapshotCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.RemoveLSBucketCmdlet">
            <summary>
            Deletes a Amazon Lightsail bucket.
             
             <note><para>
            When you delete your bucket, the bucket name is released and can be reused for a new
            bucket in your account or another Amazon Web Services account.
            </para></note>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RemoveLSBucketCmdlet.BucketName">
            <summary>
            <para>
            <para>The name of the bucket to delete.</para><para>Use the <a href="https://docs.aws.amazon.com/lightsail/2016-11-28/api-reference/API_GetBuckets.html">GetBuckets</a>
            action to get a list of bucket names that you can specify.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RemoveLSBucketCmdlet.ForceDelete">
            <summary>
            <para>
            <para>A Boolean value that indicates whether to force delete the bucket.</para><para>You must force delete the bucket if it has one of the following conditions:</para><ul><li><para>The bucket is the origin of a distribution.</para></li><li><para>The bucket has instances that were granted access to it using the <a href="https://docs.aws.amazon.com/lightsail/2016-11-28/api-reference/API_SetResourceAccessForBucket.html">SetResourceAccessForBucket</a>
            action.</para></li><li><para>The bucket has objects.</para></li><li><para>The bucket has access keys.</para></li></ul><important><para>Force deleting a bucket might impact other resources that rely on the bucket, such
            as instances, distributions, or software that use the issued access keys.</para></important>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RemoveLSBucketCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Operations'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.DeleteBucketResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.DeleteBucketResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RemoveLSBucketCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the BucketName parameter.
            The -PassThru parameter is deprecated, use -Select '^BucketName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RemoveLSBucketCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.RemoveLSBucketAccessKeyCmdlet">
            <summary>
            Deletes an access key for the specified Amazon Lightsail bucket.
             
              
            <para>
            We recommend that you delete an access key if the secret access key is compromised.
            </para><para>
            For more information about access keys, see <a href="https://lightsail.aws.amazon.com/ls/docs/en_us/articles/amazon-lightsail-creating-bucket-access-keys">Creating
            access keys for a bucket in Amazon Lightsail</a> in the <i>Amazon Lightsail Developer
            Guide</i>.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RemoveLSBucketAccessKeyCmdlet.AccessKeyId">
            <summary>
            <para>
            <para>The ID of the access key to delete.</para><para>Use the <a href="https://docs.aws.amazon.com/lightsail/2016-11-28/api-reference/API_GetBucketAccessKeys.html">GetBucketAccessKeys</a>
            action to get a list of access key IDs that you can specify.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RemoveLSBucketAccessKeyCmdlet.BucketName">
            <summary>
            <para>
            <para>The name of the bucket that the access key belongs to.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RemoveLSBucketAccessKeyCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Operations'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.DeleteBucketAccessKeyResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.DeleteBucketAccessKeyResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RemoveLSBucketAccessKeyCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the AccessKeyId parameter.
            The -PassThru parameter is deprecated, use -Select '^AccessKeyId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RemoveLSBucketAccessKeyCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.RemoveLSCertificateCmdlet">
            <summary>
            Deletes an SSL/TLS certificate for your Amazon Lightsail content delivery network
            (CDN) distribution.
             
              
            <para>
            Certificates that are currently attached to a distribution cannot be deleted. Use
            the <c>DetachCertificateFromDistribution</c> action to detach a certificate from a
            distribution.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RemoveLSCertificateCmdlet.CertificateName">
            <summary>
            <para>
            <para>The name of the certificate to delete.</para><para>Use the <c>GetCertificates</c> action to get a list of certificate names that you
            can specify.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RemoveLSCertificateCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Operations'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.DeleteCertificateResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.DeleteCertificateResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RemoveLSCertificateCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the CertificateName parameter.
            The -PassThru parameter is deprecated, use -Select '^CertificateName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RemoveLSCertificateCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.RemoveLSContactMethodCmdlet">
            <summary>
            Deletes a contact method.
             
              
            <para>
            A contact method is used to send you notifications about your Amazon Lightsail resources.
            You can add one email address and one mobile phone number contact method in each Amazon
            Web Services Region. However, SMS text messaging is not supported in some Amazon Web
            Services Regions, and SMS text messages cannot be sent to some countries/regions.
            For more information, see <a href="https://lightsail.aws.amazon.com/ls/docs/en_us/articles/amazon-lightsail-notifications">Notifications
            in Amazon Lightsail</a>.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RemoveLSContactMethodCmdlet.Protocol">
            <summary>
            <para>
            <para>The protocol that will be deleted, such as <c>Email</c> or <c>SMS</c> (text messaging).</para><note><para>To delete an <c>Email</c> and an <c>SMS</c> contact method if you added both, you
            must run separate <c>DeleteContactMethod</c> actions to delete each protocol.</para></note>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RemoveLSContactMethodCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Operations'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.DeleteContactMethodResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.DeleteContactMethodResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RemoveLSContactMethodCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the Protocol parameter.
            The -PassThru parameter is deprecated, use -Select '^Protocol' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RemoveLSContactMethodCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.RemoveLSContainerImageCmdlet">
            <summary>
            Deletes a container image that is registered to your Amazon Lightsail container service.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RemoveLSContainerImageCmdlet.Image">
            <summary>
            <para>
            <para>The name of the container image to delete from the container service.</para><para>Use the <c>GetContainerImages</c> action to get the name of the container images that
            are registered to a container service.</para><note><para>Container images sourced from your Lightsail container service, that are registered
            and stored on your service, start with a colon (<c>:</c>). For example, <c>:container-service-1.mystaticwebsite.1</c>.
            Container images sourced from a public registry like Docker Hub don't start with a
            colon. For example, <c>nginx:latest</c> or <c>nginx</c>.</para></note>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RemoveLSContainerImageCmdlet.ServiceName">
            <summary>
            <para>
            <para>The name of the container service for which to delete a registered container image.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RemoveLSContainerImageCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.DeleteContainerImageResponse).
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RemoveLSContainerImageCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the ServiceName parameter.
            The -PassThru parameter is deprecated, use -Select '^ServiceName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RemoveLSContainerImageCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.RemoveLSContainerServiceCmdlet">
            <summary>
            Deletes your Amazon Lightsail container service.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RemoveLSContainerServiceCmdlet.ServiceName">
            <summary>
            <para>
            <para>The name of the container service to delete.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RemoveLSContainerServiceCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.DeleteContainerServiceResponse).
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RemoveLSContainerServiceCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the ServiceName parameter.
            The -PassThru parameter is deprecated, use -Select '^ServiceName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RemoveLSContainerServiceCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.RemoveLSDiskCmdlet">
            <summary>
            Deletes the specified block storage disk. The disk must be in the <c>available</c>
            state (not attached to a Lightsail instance).
             
             <note><para>
            The disk may remain in the <c>deleting</c> state for several minutes.
            </para></note><para>
            The <c>delete disk</c> operation supports tag-based access control via resource tags
            applied to the resource identified by <c>disk name</c>. For more information, see
            the <a href="https://lightsail.aws.amazon.com/ls/docs/en_us/articles/amazon-lightsail-controlling-access-using-tags">Amazon
            Lightsail Developer Guide</a>.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RemoveLSDiskCmdlet.DiskName">
            <summary>
            <para>
            <para>The unique name of the disk you want to delete (<c>my-disk</c>).</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RemoveLSDiskCmdlet.ForceDeleteAddOn">
            <summary>
            <para>
            <para>A Boolean value to indicate whether to delete all add-ons for the disk.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RemoveLSDiskCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Operations'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.DeleteDiskResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.DeleteDiskResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RemoveLSDiskCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the DiskName parameter.
            The -PassThru parameter is deprecated, use -Select '^DiskName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RemoveLSDiskCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.RemoveLSDiskSnapshotCmdlet">
            <summary>
            Deletes the specified disk snapshot.
             
              
            <para>
            When you make periodic snapshots of a disk, the snapshots are incremental, and only
            the blocks on the device that have changed since your last snapshot are saved in the
            new snapshot. When you delete a snapshot, only the data not needed for any other snapshot
            is removed. So regardless of which prior snapshots have been deleted, all active snapshots
            will have access to all the information needed to restore the disk.
            </para><para>
            The <c>delete disk snapshot</c> operation supports tag-based access control via resource
            tags applied to the resource identified by <c>disk snapshot name</c>. For more information,
            see the <a href="https://lightsail.aws.amazon.com/ls/docs/en_us/articles/amazon-lightsail-controlling-access-using-tags">Amazon
            Lightsail Developer Guide</a>.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RemoveLSDiskSnapshotCmdlet.DiskSnapshotName">
            <summary>
            <para>
            <para>The name of the disk snapshot you want to delete (<c>my-disk-snapshot</c>).</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RemoveLSDiskSnapshotCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Operations'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.DeleteDiskSnapshotResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.DeleteDiskSnapshotResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RemoveLSDiskSnapshotCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the DiskSnapshotName parameter.
            The -PassThru parameter is deprecated, use -Select '^DiskSnapshotName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RemoveLSDiskSnapshotCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.RemoveLSDistributionCmdlet">
            <summary>
            Deletes your Amazon Lightsail content delivery network (CDN) distribution.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RemoveLSDistributionCmdlet.DistributionName">
            <summary>
            <para>
            <para>The name of the distribution to delete.</para><para>Use the <c>GetDistributions</c> action to get a list of distribution names that you
            can specify.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RemoveLSDistributionCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Operation'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.DeleteDistributionResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.DeleteDistributionResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RemoveLSDistributionCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the DistributionName parameter.
            The -PassThru parameter is deprecated, use -Select '^DistributionName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RemoveLSDistributionCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.RemoveLSDomainCmdlet">
            <summary>
            Deletes the specified domain recordset and all of its domain records.
             
              
            <para>
            The <c>delete domain</c> operation supports tag-based access control via resource
            tags applied to the resource identified by <c>domain name</c>. For more information,
            see the <a href="https://lightsail.aws.amazon.com/ls/docs/en_us/articles/amazon-lightsail-controlling-access-using-tags">Amazon
            Lightsail Developer Guide</a>.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RemoveLSDomainCmdlet.DomainName">
            <summary>
            <para>
            <para>The specific domain name to delete.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RemoveLSDomainCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Operation'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.DeleteDomainResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.DeleteDomainResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RemoveLSDomainCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the DomainName parameter.
            The -PassThru parameter is deprecated, use -Select '^DomainName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RemoveLSDomainCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.RemoveLSDomainEntryCmdlet">
            <summary>
            Deletes a specific domain entry.
             
              
            <para>
            The <c>delete domain entry</c> operation supports tag-based access control via resource
            tags applied to the resource identified by <c>domain name</c>. For more information,
            see the <a href="https://lightsail.aws.amazon.com/ls/docs/en_us/articles/amazon-lightsail-controlling-access-using-tags">Amazon
            Lightsail Developer Guide</a>.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RemoveLSDomainEntryCmdlet.DomainName">
            <summary>
            <para>
            <para>The name of the domain entry to delete.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RemoveLSDomainEntryCmdlet.DomainEntry_Id">
            <summary>
            <para>
            <para>The ID of the domain recordset entry.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RemoveLSDomainEntryCmdlet.DomainEntry_IsAlias">
            <summary>
            <para>
            <para>When <c>true</c>, specifies whether the domain entry is an alias used by the Lightsail
            load balancer, Lightsail container service, Lightsail content delivery network (CDN)
            distribution, or another Amazon Web Services resource. You can include an alias (A
            type) record in your request, which points to the DNS name of a load balancer, container
            service, CDN distribution, or other Amazon Web Services resource and routes traffic
            to that resource.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RemoveLSDomainEntryCmdlet.DomainEntry_Name">
            <summary>
            <para>
            <para>The name of the domain.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RemoveLSDomainEntryCmdlet.DomainEntry_Target">
            <summary>
            <para>
            <para>The target IP address (<c>192.0.2.0</c>), or AWS name server (<c>ns-111.awsdns-22.com.</c>).</para><para>For Lightsail load balancers, the value looks like <c>ab1234c56789c6b86aba6fb203d443bc-123456789.us-east-2.elb.amazonaws.com</c>.
            For Lightsail distributions, the value looks like <c>exampled1182ne.cloudfront.net</c>.
            For Lightsail container services, the value looks like <c>container-service-1.example23scljs.us-west-2.cs.amazonlightsail.com</c>.
            Be sure to also set <c>isAlias</c> to <c>true</c> when setting up an A record for
            a Lightsail load balancer, distribution, or container service.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RemoveLSDomainEntryCmdlet.DomainEntry_Type">
            <summary>
            <para>
            <para>The type of domain entry, such as address for IPv4 (A), address for IPv6 (AAAA), canonical
            name (CNAME), mail exchanger (MX), name server (NS), start of authority (SOA), service
            locator (SRV), or text (TXT).</para><para>The following domain entry types can be used:</para><ul><li><para><c>A</c></para></li><li><para><c>AAAA</c></para></li><li><para><c>CNAME</c></para></li><li><para><c>MX</c></para></li><li><para><c>NS</c></para></li><li><para><c>SOA</c></para></li><li><para><c>SRV</c></para></li><li><para><c>TXT</c></para></li></ul>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RemoveLSDomainEntryCmdlet.DomainEntry_Option">
            <summary>
            <para>
            <para>(Discontinued) The options for the domain entry.</para><note><para>In releases prior to November 29, 2017, this parameter was not included in the API
            response. It is now discontinued.</para></note>
            </para>
            <para>This parameter is deprecated.</para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RemoveLSDomainEntryCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Operation'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.DeleteDomainEntryResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.DeleteDomainEntryResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RemoveLSDomainEntryCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the DomainName parameter.
            The -PassThru parameter is deprecated, use -Select '^DomainName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RemoveLSDomainEntryCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.RemoveLSInstanceCmdlet">
            <summary>
            Deletes an Amazon Lightsail instance.
             
              
            <para>
            The <c>delete instance</c> operation supports tag-based access control via resource
            tags applied to the resource identified by <c>instance name</c>. For more information,
            see the <a href="https://lightsail.aws.amazon.com/ls/docs/en_us/articles/amazon-lightsail-controlling-access-using-tags">Amazon
            Lightsail Developer Guide</a>.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RemoveLSInstanceCmdlet.ForceDeleteAddOn">
            <summary>
            <para>
            <para>A Boolean value to indicate whether to delete all add-ons for the instance.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RemoveLSInstanceCmdlet.InstanceName">
            <summary>
            <para>
            <para>The name of the instance to delete.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RemoveLSInstanceCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Operations'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.DeleteInstanceResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.DeleteInstanceResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RemoveLSInstanceCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the InstanceName parameter.
            The -PassThru parameter is deprecated, use -Select '^InstanceName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RemoveLSInstanceCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.RemoveLSInstanceSnapshotCmdlet">
            <summary>
            Deletes a specific snapshot of a virtual private server (or <i>instance</i>).
             
              
            <para>
            The <c>delete instance snapshot</c> operation supports tag-based access control via
            resource tags applied to the resource identified by <c>instance snapshot name</c>.
            For more information, see the <a href="https://lightsail.aws.amazon.com/ls/docs/en_us/articles/amazon-lightsail-controlling-access-using-tags">Amazon
            Lightsail Developer Guide</a>.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RemoveLSInstanceSnapshotCmdlet.InstanceSnapshotName">
            <summary>
            <para>
            <para>The name of the snapshot to delete.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RemoveLSInstanceSnapshotCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Operations'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.DeleteInstanceSnapshotResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.DeleteInstanceSnapshotResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RemoveLSInstanceSnapshotCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the InstanceSnapshotName parameter.
            The -PassThru parameter is deprecated, use -Select '^InstanceSnapshotName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RemoveLSInstanceSnapshotCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.RemoveLSKeyPairCmdlet">
            <summary>
            Deletes the specified key pair by removing the public key from Amazon Lightsail.
             
              
            <para>
            You can delete key pairs that were created using the <a href="https://docs.aws.amazon.com/lightsail/2016-11-28/api-reference/API_ImportKeyPair.html">ImportKeyPair</a>
            and <a href="https://docs.aws.amazon.com/lightsail/2016-11-28/api-reference/API_CreateKeyPair.html">CreateKeyPair</a>
            actions, as well as the Lightsail default key pair. A new default key pair will not
            be created unless you launch an instance without specifying a custom key pair, or
            you call the <a href="https://docs.aws.amazon.com/lightsail/2016-11-28/api-reference/API_DownloadDefaultKeyPair.html">DownloadDefaultKeyPair</a>
            API.
            </para><para>
            The <c>delete key pair</c> operation supports tag-based access control via resource
            tags applied to the resource identified by <c>key pair name</c>. For more information,
            see the <a href="https://lightsail.aws.amazon.com/ls/docs/en_us/articles/amazon-lightsail-controlling-access-using-tags">Amazon
            Lightsail Developer Guide</a>.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RemoveLSKeyPairCmdlet.ExpectedFingerprint">
            <summary>
            <para>
            <para>The RSA fingerprint of the Lightsail default key pair to delete.</para><note><para>The <c>expectedFingerprint</c> parameter is required only when specifying to delete
            a Lightsail default key pair.</para></note>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RemoveLSKeyPairCmdlet.KeyPairName">
            <summary>
            <para>
            <para>The name of the key pair to delete.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RemoveLSKeyPairCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Operation'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.DeleteKeyPairResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.DeleteKeyPairResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RemoveLSKeyPairCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the KeyPairName parameter.
            The -PassThru parameter is deprecated, use -Select '^KeyPairName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RemoveLSKeyPairCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.RemoveLSKnownHostKeyCmdlet">
            <summary>
            Deletes the known host key or certificate used by the Amazon Lightsail browser-based
            SSH or RDP clients to authenticate an instance. This operation enables the Lightsail
            browser-based SSH or RDP clients to connect to the instance after a host key mismatch.
             
             <important><para>
            Perform this operation only if you were expecting the host key or certificate mismatch
            or if you are familiar with the new host key or certificate on the instance. For more
            information, see <a href="https://lightsail.aws.amazon.com/ls/docs/en_us/articles/amazon-lightsail-troubleshooting-browser-based-ssh-rdp-client-connection">Troubleshooting
            connection issues when using the Amazon Lightsail browser-based SSH or RDP client</a>.
            </para></important>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RemoveLSKnownHostKeyCmdlet.InstanceName">
            <summary>
            <para>
            <para>The name of the instance for which you want to reset the host key or certificate.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RemoveLSKnownHostKeyCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Operations'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.DeleteKnownHostKeysResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.DeleteKnownHostKeysResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RemoveLSKnownHostKeyCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the InstanceName parameter.
            The -PassThru parameter is deprecated, use -Select '^InstanceName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RemoveLSKnownHostKeyCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.RemoveLSLoadBalancerCmdlet">
            <summary>
            Deletes a Lightsail load balancer and all its associated SSL/TLS certificates. Once
            the load balancer is deleted, you will need to create a new load balancer, create
            a new certificate, and verify domain ownership again.
             
              
            <para>
            The <c>delete load balancer</c> operation supports tag-based access control via resource
            tags applied to the resource identified by <c>load balancer name</c>. For more information,
            see the <a href="https://lightsail.aws.amazon.com/ls/docs/en_us/articles/amazon-lightsail-controlling-access-using-tags">Amazon
            Lightsail Developer Guide</a>.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RemoveLSLoadBalancerCmdlet.LoadBalancerName">
            <summary>
            <para>
            <para>The name of the load balancer you want to delete.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RemoveLSLoadBalancerCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Operations'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.DeleteLoadBalancerResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.DeleteLoadBalancerResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RemoveLSLoadBalancerCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the LoadBalancerName parameter.
            The -PassThru parameter is deprecated, use -Select '^LoadBalancerName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RemoveLSLoadBalancerCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.RemoveLSLoadBalancerTlsCertificateCmdlet">
            <summary>
            Deletes an SSL/TLS certificate associated with a Lightsail load balancer.
             
              
            <para>
            The <c>DeleteLoadBalancerTlsCertificate</c> operation supports tag-based access control
            via resource tags applied to the resource identified by <c>load balancer name</c>.
            For more information, see the <a href="https://lightsail.aws.amazon.com/ls/docs/en_us/articles/amazon-lightsail-controlling-access-using-tags">Amazon
            Lightsail Developer Guide</a>.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RemoveLSLoadBalancerTlsCertificateCmdlet.CertificateName">
            <summary>
            <para>
            <para>The SSL/TLS certificate name.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RemoveLSLoadBalancerTlsCertificateCmdlet.DeleteWithForce">
            <summary>
            <para>
            <para>When <c>true</c>, forces the deletion of an SSL/TLS certificate.</para><para>There can be two certificates associated with a Lightsail load balancer: the primary
            and the backup. The <c>force</c> parameter is required when the primary SSL/TLS certificate
            is in use by an instance attached to the load balancer.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RemoveLSLoadBalancerTlsCertificateCmdlet.LoadBalancerName">
            <summary>
            <para>
            <para>The load balancer name.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RemoveLSLoadBalancerTlsCertificateCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Operations'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.DeleteLoadBalancerTlsCertificateResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.DeleteLoadBalancerTlsCertificateResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RemoveLSLoadBalancerTlsCertificateCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the CertificateName parameter.
            The -PassThru parameter is deprecated, use -Select '^CertificateName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RemoveLSLoadBalancerTlsCertificateCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.RemoveLSPeerVpcCmdlet">
            <summary>
            Unpeers the Lightsail VPC from the user's default VPC.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RemoveLSPeerVpcCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Operation'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.UnpeerVpcResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.UnpeerVpcResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RemoveLSPeerVpcCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.RemoveLSRelationalDatabaseCmdlet">
            <summary>
            Deletes a database in Amazon Lightsail.
             
              
            <para>
            The <c>delete relational database</c> operation supports tag-based access control
            via resource tags applied to the resource identified by relationalDatabaseName. For
            more information, see the <a href="https://lightsail.aws.amazon.com/ls/docs/en_us/articles/amazon-lightsail-controlling-access-using-tags">Amazon
            Lightsail Developer Guide</a>.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RemoveLSRelationalDatabaseCmdlet.FinalRelationalDatabaseSnapshotName">
            <summary>
            <para>
            <para>The name of the database snapshot created if <c>skip final snapshot</c> is <c>false</c>,
            which is the default value for that parameter.</para><note><para>Specifying this parameter and also specifying the <c>skip final snapshot</c> parameter
            to <c>true</c> results in an error.</para></note><para>Constraints:</para><ul><li><para>Must contain from 2 to 255 alphanumeric characters, or hyphens.</para></li><li><para>The first and last character must be a letter or number.</para></li></ul>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RemoveLSRelationalDatabaseCmdlet.RelationalDatabaseName">
            <summary>
            <para>
            <para>The name of the database that you are deleting.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RemoveLSRelationalDatabaseCmdlet.SkipFinalSnapshot">
            <summary>
            <para>
            <para>Determines whether a final database snapshot is created before your database is deleted.
            If <c>true</c> is specified, no database snapshot is created. If <c>false</c> is specified,
            a database snapshot is created before your database is deleted.</para><para>You must specify the <c>final relational database snapshot name</c> parameter if the
            <c>skip final snapshot</c> parameter is <c>false</c>.</para><para>Default: <c>false</c></para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RemoveLSRelationalDatabaseCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Operations'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.DeleteRelationalDatabaseResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.DeleteRelationalDatabaseResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RemoveLSRelationalDatabaseCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the RelationalDatabaseName parameter.
            The -PassThru parameter is deprecated, use -Select '^RelationalDatabaseName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RemoveLSRelationalDatabaseCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.RemoveLSRelationalDatabaseSnapshotCmdlet">
            <summary>
            Deletes a database snapshot in Amazon Lightsail.
             
              
            <para>
            The <c>delete relational database snapshot</c> operation supports tag-based access
            control via resource tags applied to the resource identified by relationalDatabaseName.
            For more information, see the <a href="https://lightsail.aws.amazon.com/ls/docs/en_us/articles/amazon-lightsail-controlling-access-using-tags">Amazon
            Lightsail Developer Guide</a>.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RemoveLSRelationalDatabaseSnapshotCmdlet.RelationalDatabaseSnapshotName">
            <summary>
            <para>
            <para>The name of the database snapshot that you are deleting.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RemoveLSRelationalDatabaseSnapshotCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Operations'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.DeleteRelationalDatabaseSnapshotResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.DeleteRelationalDatabaseSnapshotResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RemoveLSRelationalDatabaseSnapshotCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the RelationalDatabaseSnapshotName parameter.
            The -PassThru parameter is deprecated, use -Select '^RelationalDatabaseSnapshotName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RemoveLSRelationalDatabaseSnapshotCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.RemoveLSResourceTagCmdlet">
            <summary>
            Deletes the specified set of tag keys and their values from the specified Amazon Lightsail
            resource.
             
              
            <para>
            The <c>untag resource</c> operation supports tag-based access control via request
            tags and resource tags applied to the resource identified by <c>resource name</c>.
            For more information, see the <a href="https://lightsail.aws.amazon.com/ls/docs/en_us/articles/amazon-lightsail-controlling-access-using-tags">Amazon
            Lightsail Developer Guide</a>.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RemoveLSResourceTagCmdlet.ResourceArn">
            <summary>
            <para>
            <para>The Amazon Resource Name (ARN) of the resource from which you want to remove a tag.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RemoveLSResourceTagCmdlet.ResourceName">
            <summary>
            <para>
            <para>The name of the resource from which you are removing a tag.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RemoveLSResourceTagCmdlet.TagKey">
            <summary>
            <para>
            <para>The tag keys to delete from the specified resource.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RemoveLSResourceTagCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Operations'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.UntagResourceResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.UntagResourceResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RemoveLSResourceTagCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the ResourceName parameter.
            The -PassThru parameter is deprecated, use -Select '^ResourceName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RemoveLSResourceTagCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.RemoveLSStaticIpCmdlet">
            <summary>
            Deletes a specific static IP from your account.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RemoveLSStaticIpCmdlet.StaticIpName">
            <summary>
            <para>
            <para>The name of the static IP to delete.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RemoveLSStaticIpCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Operations'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.ReleaseStaticIpResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.ReleaseStaticIpResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RemoveLSStaticIpCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the StaticIpName parameter.
            The -PassThru parameter is deprecated, use -Select '^StaticIpName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RemoveLSStaticIpCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.ResetLSDistributionCacheCmdlet">
            <summary>
            Deletes currently cached content from your Amazon Lightsail content delivery network
            (CDN) distribution.
             
              
            <para>
            After resetting the cache, the next time a content request is made, your distribution
            pulls, serves, and caches it from the origin.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.ResetLSDistributionCacheCmdlet.DistributionName">
            <summary>
            <para>
            <para>The name of the distribution for which to reset cache.</para><para>Use the <c>GetDistributions</c> action to get a list of distribution names that you
            can specify.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.ResetLSDistributionCacheCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is '*'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.ResetDistributionCacheResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.ResetDistributionCacheResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.ResetLSDistributionCacheCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the DistributionName parameter.
            The -PassThru parameter is deprecated, use -Select '^DistributionName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.ResetLSDistributionCacheCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.RestartLSInstanceCmdlet">
            <summary>
            Restarts a specific instance.
             
              
            <para>
            The <c>reboot instance</c> operation supports tag-based access control via resource
            tags applied to the resource identified by <c>instance name</c>. For more information,
            see the <a href="https://lightsail.aws.amazon.com/ls/docs/en_us/articles/amazon-lightsail-controlling-access-using-tags">Amazon
            Lightsail Developer Guide</a>.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RestartLSInstanceCmdlet.InstanceName">
            <summary>
            <para>
            <para>The name of the instance to reboot.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RestartLSInstanceCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Operations'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.RebootInstanceResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.RebootInstanceResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RestartLSInstanceCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the InstanceName parameter.
            The -PassThru parameter is deprecated, use -Select '^InstanceName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RestartLSInstanceCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.RestartLSRelationalDatabaseCmdlet">
            <summary>
            Restarts a specific database in Amazon Lightsail.
             
              
            <para>
            The <c>reboot relational database</c> operation supports tag-based access control
            via resource tags applied to the resource identified by relationalDatabaseName. For
            more information, see the <a href="https://lightsail.aws.amazon.com/ls/docs/en_us/articles/amazon-lightsail-controlling-access-using-tags">Amazon
            Lightsail Developer Guide</a>.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RestartLSRelationalDatabaseCmdlet.RelationalDatabaseName">
            <summary>
            <para>
            <para>The name of your database to reboot.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RestartLSRelationalDatabaseCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Operations'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.RebootRelationalDatabaseResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.RebootRelationalDatabaseResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RestartLSRelationalDatabaseCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the RelationalDatabaseName parameter.
            The -PassThru parameter is deprecated, use -Select '^RelationalDatabaseName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.RestartLSRelationalDatabaseCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.SendLSContactMethodVerificationCmdlet">
            <summary>
            Sends a verification request to an email contact method to ensure it's owned by the
            requester. SMS contact methods don't need to be verified.
             
              
            <para>
            A contact method is used to send you notifications about your Amazon Lightsail resources.
            You can add one email address and one mobile phone number contact method in each Amazon
            Web Services Region. However, SMS text messaging is not supported in some Amazon Web
            Services Regions, and SMS text messages cannot be sent to some countries/regions.
            For more information, see <a href="https://lightsail.aws.amazon.com/ls/docs/en_us/articles/amazon-lightsail-notifications">Notifications
            in Amazon Lightsail</a>.
            </para><para>
            A verification request is sent to the contact method when you initially create it.
            Use this action to send another verification request if a previous verification request
            was deleted, or has expired.
            </para><important><para>
            Notifications are not sent to an email contact method until after it is verified,
            and confirmed as valid.
            </para></important>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.SendLSContactMethodVerificationCmdlet.Protocol">
            <summary>
            <para>
            <para>The protocol to verify, such as <c>Email</c> or <c>SMS</c> (text messaging).</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.SendLSContactMethodVerificationCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Operations'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.SendContactMethodVerificationResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.SendContactMethodVerificationResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.SendLSContactMethodVerificationCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the Protocol parameter.
            The -PassThru parameter is deprecated, use -Select '^Protocol' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.SendLSContactMethodVerificationCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.SetLSInstanceHttpCmdlet">
            <summary>
            Creates an SSL/TLS certificate that secures traffic for your website. After the certificate
            is created, it is installed on the specified Lightsail instance.
             
              
            <para>
            If you provide more than one domain name in the request, at least one name must be
            less than or equal to 63 characters in length.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.SetLSInstanceHttpCmdlet.CertificateProvider">
            <summary>
            <para>
            <para>The certificate authority that issues the SSL/TLS certificate.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.SetLSInstanceHttpCmdlet.DomainName">
            <summary>
            <para>
            <para>The name of the domain and subdomains that were specified for the SSL/TLS certificate.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.SetLSInstanceHttpCmdlet.EmailAddress">
            <summary>
            <para>
            <para>The contact method for SSL/TLS certificate renewal alerts. You can enter one email
            address. </para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.SetLSInstanceHttpCmdlet.InstanceName">
            <summary>
            <para>
            <para>The name of the Lightsail instance.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.SetLSInstanceHttpCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Operations'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.SetupInstanceHttpsResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.SetupInstanceHttpsResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.SetLSInstanceHttpCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the InstanceName parameter.
            The -PassThru parameter is deprecated, use -Select '^InstanceName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.SetLSInstanceHttpCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.SetLSInstancePublicPortCmdlet">
            <summary>
            Opens ports for a specific Amazon Lightsail instance, and specifies the IP addresses
            allowed to connect to the instance through the ports, and the protocol. This action
            also closes all currently open ports that are not included in the request. Include
            all of the ports and the protocols you want to open in your <c>PutInstancePublicPorts</c>request.
            Or use the <c>OpenInstancePublicPorts</c> action to open ports without closing currently
            open ports.
             
              
            <para>
            The <c>PutInstancePublicPorts</c> action supports tag-based access control via resource
            tags applied to the resource identified by <c>instanceName</c>. For more information,
            see the <a href="https://lightsail.aws.amazon.com/ls/docs/en_us/articles/amazon-lightsail-controlling-access-using-tags">Amazon
            Lightsail Developer Guide</a>.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.SetLSInstancePublicPortCmdlet.InstanceName">
            <summary>
            <para>
            <para>The name of the instance for which to open ports.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.SetLSInstancePublicPortCmdlet.PortInfo">
            <summary>
            <para>
            <para>An array of objects to describe the ports to open for the specified instance.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.SetLSInstancePublicPortCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Operation'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.PutInstancePublicPortsResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.PutInstancePublicPortsResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.SetLSInstancePublicPortCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the InstanceName parameter.
            The -PassThru parameter is deprecated, use -Select '^InstanceName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.SetLSInstancePublicPortCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.SetLSIpAddressTypeCmdlet">
            <summary>
            Sets the IP address type for an Amazon Lightsail resource.
             
              
            <para>
            Use this action to enable dual-stack for a resource, which enables IPv4 and IPv6 for
            the specified resource. Alternately, you can use this action to disable dual-stack,
            and enable IPv4 only.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.SetLSIpAddressTypeCmdlet.AcceptBundleUpdate">
            <summary>
            <para>
            <para>Required parameter to accept the instance bundle update when changing to, and from,
            IPv6-only.</para><note><para>An instance bundle will change when switching from <c>dual-stack</c> or <c>ipv4</c>,
            to <c>ipv6</c>. It also changes when switching from <c>ipv6</c>, to <c>dual-stack</c>
            or <c>ipv4</c>.</para><para>You must include this parameter in the command to update the bundle. For example,
            if you switch from <c>dual-stack</c> to <c>ipv6</c>, the bundle will be updated, and
            billing for the IPv6-only instance bundle begins immediately.</para></note>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.SetLSIpAddressTypeCmdlet.IpAddressType">
            <summary>
            <para>
            <para>The IP address type to set for the specified resource.</para><para>The possible values are <c>ipv4</c> for IPv4 only, <c>ipv6</c> for IPv6 only, and
            <c>dualstack</c> for IPv4 and IPv6.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.SetLSIpAddressTypeCmdlet.ResourceName">
            <summary>
            <para>
            <para>The name of the resource for which to set the IP address type.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.SetLSIpAddressTypeCmdlet.ResourceType">
            <summary>
            <para>
            <para>The resource type.</para><para>The resource values are <c>Distribution</c>, <c>Instance</c>, and <c>LoadBalancer</c>.</para><note><para>Distribution-related APIs are available only in the N. Virginia (<c>us-east-1</c>)
            Amazon Web Services Region. Set your Amazon Web Services Region configuration to <c>us-east-1</c>
            to create, view, or edit distributions.</para></note>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.SetLSIpAddressTypeCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Operations'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.SetIpAddressTypeResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.SetIpAddressTypeResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.SetLSIpAddressTypeCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.SetLSResourceAccessForBucketCmdlet">
            <summary>
            Sets the Amazon Lightsail resources that can access the specified Lightsail bucket.
             
              
            <para>
            Lightsail buckets currently support setting access for Lightsail instances in the
            same Amazon Web Services Region.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.SetLSResourceAccessForBucketCmdlet.Access">
            <summary>
            <para>
            <para>The access setting.</para><para>The following access settings are available:</para><ul><li><para><c>allow</c> - Allows access to the bucket and its objects.</para></li><li><para><c>deny</c> - Denies access to the bucket and its objects. Use this setting to remove
            access for a resource previously set to <c>allow</c>.</para></li></ul>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.SetLSResourceAccessForBucketCmdlet.BucketName">
            <summary>
            <para>
            <para>The name of the bucket for which to set access to another Lightsail resource.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.SetLSResourceAccessForBucketCmdlet.ResourceName">
            <summary>
            <para>
            <para>The name of the Lightsail instance for which to set bucket access. The instance must
            be in a running or stopped state.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.SetLSResourceAccessForBucketCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Operations'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.SetResourceAccessForBucketResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.SetResourceAccessForBucketResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.SetLSResourceAccessForBucketCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the BucketName parameter.
            The -PassThru parameter is deprecated, use -Select '^BucketName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.SetLSResourceAccessForBucketCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.StartLSGUISessionCmdlet">
            <summary>
            Initiates a graphical user interface (GUI) session that’s used to access a virtual
            computer’s operating system and application. The session will be active for 1 hour.
            Use this action to resume the session after it expires.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.StartLSGUISessionCmdlet.ResourceName">
            <summary>
            <para>
            <para>The resource name.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.StartLSGUISessionCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Operations'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.StartGUISessionResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.StartGUISessionResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.StartLSGUISessionCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the ResourceName parameter.
            The -PassThru parameter is deprecated, use -Select '^ResourceName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.StartLSGUISessionCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.StartLSInstanceCmdlet">
            <summary>
            Starts a specific Amazon Lightsail instance from a stopped state. To restart an instance,
            use the <c>reboot instance</c> operation.
             
             <note><para>
            When you start a stopped instance, Lightsail assigns a new public IP address to the
            instance. To use the same IP address after stopping and starting an instance, create
            a static IP address and attach it to the instance. For more information, see the <a href="https://lightsail.aws.amazon.com/ls/docs/en_us/articles/lightsail-create-static-ip">Amazon
            Lightsail Developer Guide</a>.
            </para></note><para>
            The <c>start instance</c> operation supports tag-based access control via resource
            tags applied to the resource identified by <c>instance name</c>. For more information,
            see the <a href="https://lightsail.aws.amazon.com/ls/docs/en_us/articles/amazon-lightsail-controlling-access-using-tags">Amazon
            Lightsail Developer Guide</a>.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.StartLSInstanceCmdlet.InstanceName">
            <summary>
            <para>
            <para>The name of the instance (a virtual private server) to start.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.StartLSInstanceCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Operations'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.StartInstanceResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.StartInstanceResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.StartLSInstanceCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the InstanceName parameter.
            The -PassThru parameter is deprecated, use -Select '^InstanceName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.StartLSInstanceCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.StartLSRelationalDatabaseCmdlet">
            <summary>
            Starts a specific database from a stopped state in Amazon Lightsail. To restart a
            database, use the <c>reboot relational database</c> operation.
             
              
            <para>
            The <c>start relational database</c> operation supports tag-based access control via
            resource tags applied to the resource identified by relationalDatabaseName. For more
            information, see the <a href="https://lightsail.aws.amazon.com/ls/docs/en_us/articles/amazon-lightsail-controlling-access-using-tags">Amazon
            Lightsail Developer Guide</a>.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.StartLSRelationalDatabaseCmdlet.RelationalDatabaseName">
            <summary>
            <para>
            <para>The name of your database to start.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.StartLSRelationalDatabaseCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Operations'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.StartRelationalDatabaseResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.StartRelationalDatabaseResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.StartLSRelationalDatabaseCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the RelationalDatabaseName parameter.
            The -PassThru parameter is deprecated, use -Select '^RelationalDatabaseName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.StartLSRelationalDatabaseCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.StopLSGUISessionCmdlet">
            <summary>
            Terminates a web-based NICE DCV session that’s used to access a virtual computer’s
            operating system or application. The session will close and any unsaved data will
            be lost.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.StopLSGUISessionCmdlet.ResourceName">
            <summary>
            <para>
            <para>The resource name.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.StopLSGUISessionCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Operations'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.StopGUISessionResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.StopGUISessionResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.StopLSGUISessionCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the ResourceName parameter.
            The -PassThru parameter is deprecated, use -Select '^ResourceName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.StopLSGUISessionCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.StopLSInstanceCmdlet">
            <summary>
            Stops a specific Amazon Lightsail instance that is currently running.
             
             <note><para>
            When you start a stopped instance, Lightsail assigns a new public IP address to the
            instance. To use the same IP address after stopping and starting an instance, create
            a static IP address and attach it to the instance. For more information, see the <a href="https://lightsail.aws.amazon.com/ls/docs/en_us/articles/lightsail-create-static-ip">Amazon
            Lightsail Developer Guide</a>.
            </para></note><para>
            The <c>stop instance</c> operation supports tag-based access control via resource
            tags applied to the resource identified by <c>instance name</c>. For more information,
            see the <a href="https://lightsail.aws.amazon.com/ls/docs/en_us/articles/amazon-lightsail-controlling-access-using-tags">Amazon
            Lightsail Developer Guide</a>.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.StopLSInstanceCmdlet.OverrideStuck">
            <summary>
            <para>
            <para>When set to <c>True</c>, forces a Lightsail instance that is stuck in a <c>stopping</c>
            state to stop.</para><important><para>Only use the <c>force</c> parameter if your instance is stuck in the <c>stopping</c>
            state. In any other state, your instance should stop normally without adding this
            parameter to your API request.</para></important>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.StopLSInstanceCmdlet.InstanceName">
            <summary>
            <para>
            <para>The name of the instance (a virtual private server) to stop.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.StopLSInstanceCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Operations'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.StopInstanceResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.StopInstanceResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.StopLSInstanceCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the InstanceName parameter.
            The -PassThru parameter is deprecated, use -Select '^InstanceName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.StopLSInstanceCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.StopLSRelationalDatabaseCmdlet">
            <summary>
            Stops a specific database that is currently running in Amazon Lightsail.
             
              
            <para>
            The <c>stop relational database</c> operation supports tag-based access control via
            resource tags applied to the resource identified by relationalDatabaseName. For more
            information, see the <a href="https://lightsail.aws.amazon.com/ls/docs/en_us/articles/amazon-lightsail-controlling-access-using-tags">Amazon
            Lightsail Developer Guide</a>.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.StopLSRelationalDatabaseCmdlet.RelationalDatabaseName">
            <summary>
            <para>
            <para>The name of your database to stop.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.StopLSRelationalDatabaseCmdlet.RelationalDatabaseSnapshotName">
            <summary>
            <para>
            <para>The name of your new database snapshot to be created before stopping your database.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.StopLSRelationalDatabaseCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Operations'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.StopRelationalDatabaseResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.StopRelationalDatabaseResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.StopLSRelationalDatabaseCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the RelationalDatabaseName parameter.
            The -PassThru parameter is deprecated, use -Select '^RelationalDatabaseName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.StopLSRelationalDatabaseCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.TestLSAlarmCmdlet">
            <summary>
            Tests an alarm by displaying a banner on the Amazon Lightsail console. If a notification
            trigger is configured for the specified alarm, the test also sends a notification
            to the notification protocol (<c>Email</c> and/or <c>SMS</c>) configured for the alarm.
             
              
            <para>
            An alarm is used to monitor a single metric for one of your resources. When a metric
            condition is met, the alarm can notify you by email, SMS text message, and a banner
            displayed on the Amazon Lightsail console. For more information, see <a href="https://lightsail.aws.amazon.com/ls/docs/en_us/articles/amazon-lightsail-alarms">Alarms
            in Amazon Lightsail</a>.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.TestLSAlarmCmdlet.AlarmName">
            <summary>
            <para>
            <para>The name of the alarm to test.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.TestLSAlarmCmdlet.State">
            <summary>
            <para>
            <para>The alarm state to test.</para><para>An alarm has the following possible states that can be tested:</para><ul><li><para><c>ALARM</c> - The metric is outside of the defined threshold.</para></li><li><para><c>INSUFFICIENT_DATA</c> - The alarm has just started, the metric is not available,
            or not enough data is available for the metric to determine the alarm state.</para></li><li><para><c>OK</c> - The metric is within the defined threshold.</para></li></ul>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.TestLSAlarmCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Operations'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.TestAlarmResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.TestAlarmResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.TestLSAlarmCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the AlarmName parameter.
            The -PassThru parameter is deprecated, use -Select '^AlarmName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.TestLSVpcPeeredCmdlet">
            <summary>
            Returns a Boolean value indicating whether your Lightsail VPC is peered.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.TestLSVpcPeeredCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'IsPeered'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.IsVpcPeeredResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.IsVpcPeeredResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.UpdateLSBucketCmdlet">
            <summary>
            Updates an existing Amazon Lightsail bucket.
             
              
            <para>
            Use this action to update the configuration of an existing bucket, such as versioning,
            public accessibility, and the Amazon Web Services accounts that can access the bucket.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.UpdateLSBucketCmdlet.AccessRules_AllowPublicOverride">
            <summary>
            <para>
            <para>A Boolean value that indicates whether the access control list (ACL) permissions that
            are applied to individual objects override the <c>getObject</c> option that is currently
            specified.</para><para>When this is true, you can use the <a href="https://docs.aws.amazon.com/AmazonS3/latest/API/API_PutObjectAcl.html">PutObjectAcl</a>
            Amazon S3 API action to set individual objects to public (read-only) using the <c>public-read</c>
            ACL, or to private using the <c>private</c> ACL.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.UpdateLSBucketCmdlet.BucketName">
            <summary>
            <para>
            <para>The name of the bucket to update.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.UpdateLSBucketCmdlet.AccessLogConfig_Destination">
            <summary>
            <para>
            <para>The name of the bucket where the access logs are saved. The destination can be a Lightsail
            bucket in the same account, and in the same Amazon Web Services Region as the source
            bucket.</para><note><para>This parameter is required when enabling the access log for a bucket, and should be
            omitted when disabling the access log.</para></note>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.UpdateLSBucketCmdlet.AccessLogConfig_Enabled">
            <summary>
            <para>
            <para>A Boolean value that indicates whether bucket access logging is enabled for the bucket.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.UpdateLSBucketCmdlet.AccessRules_GetObject">
            <summary>
            <para>
            <para>Specifies the anonymous access to all objects in a bucket.</para><para>The following options can be specified:</para><ul><li><para><c>public</c> - Sets all objects in the bucket to public (read-only), making them
            readable by anyone in the world.</para><para>If the <c>getObject</c> value is set to <c>public</c>, then all objects in the bucket
            default to public regardless of the <c>allowPublicOverrides</c> value.</para></li><li><para><c>private</c> - Sets all objects in the bucket to private, making them readable
            only by you or anyone you give access to.</para><para>If the <c>getObject</c> value is set to <c>private</c>, and the <c>allowPublicOverrides</c>
            value is set to <c>true</c>, then all objects in the bucket default to private unless
            they are configured with a <c>public-read</c> ACL. Individual objects with a <c>public-read</c>
            ACL are readable by anyone in the world.</para></li></ul>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.UpdateLSBucketCmdlet.AccessLogConfig_Prefix">
            <summary>
            <para>
            <para>The optional object prefix for the bucket access log.</para><para>The prefix is an optional addition to the object key that organizes your access log
            files in the destination bucket. For example, if you specify a <c>logs/</c> prefix,
            then each log object will begin with the <c>logs/</c> prefix in its key (for example,
            <c>logs/2021-11-01-21-32-16-E568B2907131C0C0</c>).</para><note><para>This parameter can be optionally specified when enabling the access log for a bucket,
            and should be omitted when disabling the access log.</para></note>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.UpdateLSBucketCmdlet.ReadonlyAccessAccount">
            <summary>
            <para>
            <para>An array of strings to specify the Amazon Web Services account IDs that can access
            the bucket.</para><para>You can give a maximum of 10 Amazon Web Services accounts access to a bucket.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.UpdateLSBucketCmdlet.Versioning">
            <summary>
            <para>
            <para>Specifies whether to enable or suspend versioning of objects in the bucket.</para><para>The following options can be specified:</para><ul><li><para><c>Enabled</c> - Enables versioning of objects in the specified bucket.</para></li><li><para><c>Suspended</c> - Suspends versioning of objects in the specified bucket. Existing
            object versions are retained.</para></li></ul>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.UpdateLSBucketCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is '*'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.UpdateBucketResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.UpdateBucketResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.UpdateLSBucketCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the BucketName parameter.
            The -PassThru parameter is deprecated, use -Select '^BucketName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.UpdateLSBucketCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.UpdateLSBucketBundleCmdlet">
            <summary>
            Updates the bundle, or storage plan, of an existing Amazon Lightsail bucket.
             
              
            <para>
            A bucket bundle specifies the monthly cost, storage space, and data transfer quota
            for a bucket. You can update a bucket's bundle only one time within a monthly Amazon
            Web Services billing cycle. To determine if you can update a bucket's bundle, use
            the <a href="https://docs.aws.amazon.com/lightsail/2016-11-28/api-reference/API_GetBuckets.html">GetBuckets</a>
            action. The <c>ableToUpdateBundle</c> parameter in the response will indicate whether
            you can currently update a bucket's bundle.
            </para><para>
            Update a bucket's bundle if it's consistently going over its storage space or data
            transfer quota, or if a bucket's usage is consistently in the lower range of its storage
            space or data transfer quota. Due to the unpredictable usage fluctuations that a bucket
            might experience, we strongly recommend that you update a bucket's bundle only as
            a long-term strategy, instead of as a short-term, monthly cost-cutting measure. Choose
            a bucket bundle that will provide the bucket with ample storage space and data transfer
            for a long time to come.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.UpdateLSBucketBundleCmdlet.BucketName">
            <summary>
            <para>
            <para>The name of the bucket for which to update the bundle.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.UpdateLSBucketBundleCmdlet.BundleId">
            <summary>
            <para>
            <para>The ID of the new bundle to apply to the bucket.</para><para>Use the <a href="https://docs.aws.amazon.com/lightsail/2016-11-28/api-reference/API_GetBucketBundles.html">GetBucketBundles</a>
            action to get a list of bundle IDs that you can specify.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.UpdateLSBucketBundleCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Operations'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.UpdateBucketBundleResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.UpdateBucketBundleResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.UpdateLSBucketBundleCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the BucketName parameter.
            The -PassThru parameter is deprecated, use -Select '^BucketName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.UpdateLSBucketBundleCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.UpdateLSContainerServiceCmdlet">
            <summary>
            Updates the configuration of your Amazon Lightsail container service, such as its
            power, scale, and public domain names.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.UpdateLSContainerServiceCmdlet.EcrImagePullerRole_IsActive">
            <summary>
            <para>
            <para>A Boolean value that indicates whether to activate the role.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.UpdateLSContainerServiceCmdlet.IsDisabled">
            <summary>
            <para>
            <para>A Boolean value to indicate whether the container service is disabled.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.UpdateLSContainerServiceCmdlet.Power">
            <summary>
            <para>
            <para>The power for the container service.</para><para>The power specifies the amount of memory, vCPUs, and base monthly cost of each node
            of the container service. The <c>power</c> and <c>scale</c> of a container service
            makes up its configured capacity. To determine the monthly price of your container
            service, multiply the base price of the <c>power</c> with the <c>scale</c> (the number
            of nodes) of the service.</para><para>Use the <c>GetContainerServicePowers</c> action to view the specifications of each
            power option.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.UpdateLSContainerServiceCmdlet.PublicDomainName">
            <summary>
            <para>
            <para>The public domain names to use with the container service, such as <c>example.com</c>
            and <c>www.example.com</c>.</para><para>You can specify up to four public domain names for a container service. The domain
            names that you specify are used when you create a deployment with a container configured
            as the public endpoint of your container service.</para><para>If you don't specify public domain names, then you can use the default domain of the
            container service.</para><important><para>You must create and validate an SSL/TLS certificate before you can use public domain
            names with your container service. Use the <c>CreateCertificate</c> action to create
            a certificate for the public domain names you want to use with your container service.</para></important><para>You can specify public domain names using a string to array map as shown in the example
            later on this page.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.UpdateLSContainerServiceCmdlet.Scale">
            <summary>
            <para>
            <para>The scale for the container service.</para><para>The scale specifies the allocated compute nodes of the container service. The <c>power</c>
            and <c>scale</c> of a container service makes up its configured capacity. To determine
            the monthly price of your container service, multiply the base price of the <c>power</c>
            with the <c>scale</c> (the number of nodes) of the service.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.UpdateLSContainerServiceCmdlet.ServiceName">
            <summary>
            <para>
            <para>The name of the container service to update.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.UpdateLSContainerServiceCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'ContainerService'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.UpdateContainerServiceResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.UpdateContainerServiceResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.UpdateLSContainerServiceCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.UpdateLSDistributionCmdlet">
            <summary>
            Updates an existing Amazon Lightsail content delivery network (CDN) distribution.
             
              
            <para>
            Use this action to update the configuration of your existing distribution.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.UpdateLSDistributionCmdlet.CacheBehaviorSettings_AllowedHTTPMethod">
            <summary>
            <para>
            <para>The HTTP methods that are processed and forwarded to the distribution's origin.</para><para>You can specify the following options:</para><ul><li><para><c>GET,HEAD</c> - The distribution forwards the <c>GET</c> and <c>HEAD</c> methods.</para></li><li><para><c>GET,HEAD,OPTIONS</c> - The distribution forwards the <c>GET</c>, <c>HEAD</c>,
            and <c>OPTIONS</c> methods.</para></li><li><para><c>GET,HEAD,OPTIONS,PUT,PATCH,POST,DELETE</c> - The distribution forwards the <c>GET</c>,
            <c>HEAD</c>, <c>OPTIONS</c>, <c>PUT</c>, <c>PATCH</c>, <c>POST</c>, and <c>DELETE</c>
            methods.</para></li></ul><para>If you specify the third option, you might need to restrict access to your distribution's
            origin so users can't perform operations that you don't want them to. For example,
            you might not want users to have permission to delete objects from your origin.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.UpdateLSDistributionCmdlet.DefaultCacheBehavior_Behavior">
            <summary>
            <para>
            <para>The cache behavior of the distribution.</para><para>The following cache behaviors can be specified:</para><ul><li><para><b><c>cache</c></b> - This option is best for static sites. When specified, your
            distribution caches and serves your entire website as static content. This behavior
            is ideal for websites with static content that doesn't change depending on who views
            it, or for websites that don't use cookies, headers, or query strings to personalize
            content.</para></li><li><para><b><c>dont-cache</c></b> - This option is best for sites that serve a mix of static
            and dynamic content. When specified, your distribution caches and serve only the content
            that is specified in the distribution's <c>CacheBehaviorPerPath</c> parameter. This
            behavior is ideal for websites or web applications that use cookies, headers, and
            query strings to personalize content for individual users.</para></li></ul>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.UpdateLSDistributionCmdlet.CacheBehavior">
            <summary>
            <para>
            <para>An array of objects that describe the per-path cache behavior for the distribution.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.UpdateLSDistributionCmdlet.CacheBehaviorSettings_CachedHTTPMethod">
            <summary>
            <para>
            <para>The HTTP method responses that are cached by your distribution.</para><para>You can specify the following options:</para><ul><li><para><c>GET,HEAD</c> - The distribution caches responses to the <c>GET</c> and <c>HEAD</c>
            methods.</para></li><li><para><c>GET,HEAD,OPTIONS</c> - The distribution caches responses to the <c>GET</c>, <c>HEAD</c>,
            and <c>OPTIONS</c> methods.</para></li></ul>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.UpdateLSDistributionCmdlet.CertificateName">
            <summary>
            <para>
            <para>The name of the SSL/TLS certificate that you want to attach to the distribution.</para><para>Only certificates with a status of <c>ISSUED</c> can be attached to a distribution.</para><para>Use the <a href="https://docs.aws.amazon.com/lightsail/2016-11-28/api-reference/API_GetCertificates.html">GetCertificates</a>
            action to get a list of certificate names that you can specify.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.UpdateLSDistributionCmdlet.ForwardedCookies_CookiesAllowList">
            <summary>
            <para>
            <para>The specific cookies to forward to your distribution's origin.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.UpdateLSDistributionCmdlet.CacheBehaviorSettings_DefaultTTL">
            <summary>
            <para>
            <para>The default amount of time that objects stay in the distribution's cache before the
            distribution forwards another request to the origin to determine whether the content
            has been updated.</para><note><para>The value specified applies only when the origin does not add HTTP headers such as
            <c>Cache-Control max-age</c>, <c>Cache-Control s-maxage</c>, and <c>Expires</c> to
            objects.</para></note>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.UpdateLSDistributionCmdlet.DistributionName">
            <summary>
            <para>
            <para>The name of the distribution to update.</para><para>Use the <c>GetDistributions</c> action to get a list of distribution names that you
            can specify.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.UpdateLSDistributionCmdlet.ForwardedHeaders_HeadersAllowList">
            <summary>
            <para>
            <para>The specific headers to forward to your distribution's origin.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.UpdateLSDistributionCmdlet.IsEnabled">
            <summary>
            <para>
            <para>Indicates whether to enable the distribution.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.UpdateLSDistributionCmdlet.CacheBehaviorSettings_MaximumTTL">
            <summary>
            <para>
            <para>The maximum amount of time that objects stay in the distribution's cache before the
            distribution forwards another request to the origin to determine whether the object
            has been updated.</para><para>The value specified applies only when the origin adds HTTP headers such as <c>Cache-Control
            max-age</c>, <c>Cache-Control s-maxage</c>, and <c>Expires</c> to objects.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.UpdateLSDistributionCmdlet.CacheBehaviorSettings_MinimumTTL">
            <summary>
            <para>
            <para>The minimum amount of time that objects stay in the distribution's cache before the
            distribution forwards another request to the origin to determine whether the object
            has been updated.</para><para>A value of <c>0</c> must be specified for <c>minimumTTL</c> if the distribution is
            configured to forward all headers to the origin.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.UpdateLSDistributionCmdlet.Origin_Name">
            <summary>
            <para>
            <para>The name of the origin resource.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.UpdateLSDistributionCmdlet.ForwardedCookies_Option">
            <summary>
            <para>
            <para>Specifies which cookies to forward to the distribution's origin for a cache behavior:
            <c>all</c>, <c>none</c>, or <c>allow-list</c> to forward only the cookies specified
            in the <c>cookiesAllowList</c> parameter.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.UpdateLSDistributionCmdlet.ForwardedHeaders_Option">
            <summary>
            <para>
            <para>The headers that you want your distribution to forward to your origin and base caching
            on.</para><para>You can configure your distribution to do one of the following:</para><ul><li><para><b><c>all</c></b> - Forward all headers to your origin.</para></li><li><para><b><c>none</c></b> - Forward only the default headers.</para></li><li><para><b><c>allow-list</c></b> - Forward only the headers you specify using the <c>headersAllowList</c>
            parameter.</para></li></ul>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.UpdateLSDistributionCmdlet.ForwardedQueryStrings_Option">
            <summary>
            <para>
            <para>Indicates whether the distribution forwards and caches based on query strings.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.UpdateLSDistributionCmdlet.Origin_ProtocolPolicy">
            <summary>
            <para>
            <para>The protocol that your Amazon Lightsail distribution uses when establishing a connection
            with your origin to pull content.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.UpdateLSDistributionCmdlet.ForwardedQueryStrings_QueryStringsAllowList">
            <summary>
            <para>
            <para>The specific query strings that the distribution forwards to the origin.</para><para>Your distribution will cache content based on the specified query strings.</para><para>If the <c>option</c> parameter is true, then your distribution forwards all query
            strings, regardless of what you specify using the <c>queryStringsAllowList</c> parameter.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.UpdateLSDistributionCmdlet.Origin_RegionName">
            <summary>
            <para>
            <para>The AWS Region name of the origin resource.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.UpdateLSDistributionCmdlet.Origin_ResponseTimeout">
            <summary>
            <para>
            <para>The amount of time, in seconds, that the distribution waits for a response after forwarding
            a request to the origin. The minimum timeout is 1 second, the maximum is 60 seconds,
            and the default (if you don't specify otherwise) is 30 seconds.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.UpdateLSDistributionCmdlet.UseDefaultCertificate">
            <summary>
            <para>
            <para>Indicates whether the default SSL/TLS certificate is attached to the distribution.
            The default value is <c>true</c>. When <c>true</c>, the distribution uses the default
            domain name such as <c>d111111abcdef8.cloudfront.net</c>.</para><para> Set this value to <c>false</c> to attach a new certificate to the distribution.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.UpdateLSDistributionCmdlet.ViewerMinimumTlsProtocolVersion">
            <summary>
            <para>
            <para>Use this parameter to update the minimum TLS protocol version for the SSL/TLS certificate
            that's attached to the distribution.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.UpdateLSDistributionCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Operation'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.UpdateDistributionResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.UpdateDistributionResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.UpdateLSDistributionCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the DistributionName parameter.
            The -PassThru parameter is deprecated, use -Select '^DistributionName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.UpdateLSDistributionCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.UpdateLSDistributionBundleCmdlet">
            <summary>
            Updates the bundle of your Amazon Lightsail content delivery network (CDN) distribution.
             
              
            <para>
            A distribution bundle specifies the monthly network transfer quota and monthly cost
            of your distribution.
            </para><para>
            Update your distribution's bundle if your distribution is going over its monthly network
            transfer quota and is incurring an overage fee.
            </para><para>
            You can update your distribution's bundle only one time within your monthly Amazon
            Web Services billing cycle. To determine if you can update your distribution's bundle,
            use the <c>GetDistributions</c> action. The <c>ableToUpdateBundle</c> parameter in
            the result will indicate whether you can currently update your distribution's bundle.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.UpdateLSDistributionBundleCmdlet.BundleId">
            <summary>
            <para>
            <para>The bundle ID of the new bundle to apply to your distribution.</para><para>Use the <c>GetDistributionBundles</c> action to get a list of distribution bundle
            IDs that you can specify.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.UpdateLSDistributionBundleCmdlet.DistributionName">
            <summary>
            <para>
            <para>The name of the distribution for which to update the bundle.</para><para>Use the <c>GetDistributions</c> action to get a list of distribution names that you
            can specify.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.UpdateLSDistributionBundleCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Operation'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.UpdateDistributionBundleResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.UpdateDistributionBundleResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.UpdateLSDistributionBundleCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the DistributionName parameter.
            The -PassThru parameter is deprecated, use -Select '^DistributionName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.UpdateLSDistributionBundleCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.UpdateLSDomainEntryCmdlet">
            <summary>
            Updates a domain recordset after it is created.
             
              
            <para>
            The <c>update domain entry</c> operation supports tag-based access control via resource
            tags applied to the resource identified by <c>domain name</c>. For more information,
            see the <a href="https://lightsail.aws.amazon.com/ls/docs/en_us/articles/amazon-lightsail-controlling-access-using-tags">Amazon
            Lightsail Developer Guide</a>.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.UpdateLSDomainEntryCmdlet.DomainName">
            <summary>
            <para>
            <para>The name of the domain recordset to update.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.UpdateLSDomainEntryCmdlet.DomainEntry_Id">
            <summary>
            <para>
            <para>The ID of the domain recordset entry.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.UpdateLSDomainEntryCmdlet.DomainEntry_IsAlias">
            <summary>
            <para>
            <para>When <c>true</c>, specifies whether the domain entry is an alias used by the Lightsail
            load balancer, Lightsail container service, Lightsail content delivery network (CDN)
            distribution, or another Amazon Web Services resource. You can include an alias (A
            type) record in your request, which points to the DNS name of a load balancer, container
            service, CDN distribution, or other Amazon Web Services resource and routes traffic
            to that resource.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.UpdateLSDomainEntryCmdlet.DomainEntry_Name">
            <summary>
            <para>
            <para>The name of the domain.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.UpdateLSDomainEntryCmdlet.DomainEntry_Target">
            <summary>
            <para>
            <para>The target IP address (<c>192.0.2.0</c>), or AWS name server (<c>ns-111.awsdns-22.com.</c>).</para><para>For Lightsail load balancers, the value looks like <c>ab1234c56789c6b86aba6fb203d443bc-123456789.us-east-2.elb.amazonaws.com</c>.
            For Lightsail distributions, the value looks like <c>exampled1182ne.cloudfront.net</c>.
            For Lightsail container services, the value looks like <c>container-service-1.example23scljs.us-west-2.cs.amazonlightsail.com</c>.
            Be sure to also set <c>isAlias</c> to <c>true</c> when setting up an A record for
            a Lightsail load balancer, distribution, or container service.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.UpdateLSDomainEntryCmdlet.DomainEntry_Type">
            <summary>
            <para>
            <para>The type of domain entry, such as address for IPv4 (A), address for IPv6 (AAAA), canonical
            name (CNAME), mail exchanger (MX), name server (NS), start of authority (SOA), service
            locator (SRV), or text (TXT).</para><para>The following domain entry types can be used:</para><ul><li><para><c>A</c></para></li><li><para><c>AAAA</c></para></li><li><para><c>CNAME</c></para></li><li><para><c>MX</c></para></li><li><para><c>NS</c></para></li><li><para><c>SOA</c></para></li><li><para><c>SRV</c></para></li><li><para><c>TXT</c></para></li></ul>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.UpdateLSDomainEntryCmdlet.DomainEntry_Option">
            <summary>
            <para>
            <para>(Discontinued) The options for the domain entry.</para><note><para>In releases prior to November 29, 2017, this parameter was not included in the API
            response. It is now discontinued.</para></note>
            </para>
            <para>This parameter is deprecated.</para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.UpdateLSDomainEntryCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Operations'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.UpdateDomainEntryResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.UpdateDomainEntryResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.UpdateLSDomainEntryCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the DomainName parameter.
            The -PassThru parameter is deprecated, use -Select '^DomainName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.UpdateLSDomainEntryCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.UpdateLSInstanceMetadataOptionCmdlet">
            <summary>
            Modifies the Amazon Lightsail instance metadata parameters on a running or stopped
            instance. When you modify the parameters on a running instance, the <c>GetInstance</c>
            or <c>GetInstances</c> API operation initially responds with a state of <c>pending</c>.
            After the parameter modifications are successfully applied, the state changes to <c>applied</c>
            in subsequent <c>GetInstance</c> or <c>GetInstances</c> API calls. For more information,
            see <a href="https://lightsail.aws.amazon.com/ls/docs/en_us/articles/amazon-lightsail-configuring-instance-metadata-service">Use
            IMDSv2 with an Amazon Lightsail instance</a> in the <i>Amazon Lightsail Developer
            Guide</i>.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.UpdateLSInstanceMetadataOptionCmdlet.HttpEndpoint">
            <summary>
            <para>
            <para>Enables or disables the HTTP metadata endpoint on your instances. If this parameter
            is not specified, the existing state is maintained.</para><para>If you specify a value of <c>disabled</c>, you cannot access your instance metadata.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.UpdateLSInstanceMetadataOptionCmdlet.HttpProtocolIpv6">
            <summary>
            <para>
            <para>Enables or disables the IPv6 endpoint for the instance metadata service. This setting
            applies only when the HTTP metadata endpoint is enabled.</para><note><para>This parameter is available only for instances in the Europe (Stockholm) Amazon Web
            Services Region (<c>eu-north-1</c>).</para></note>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.UpdateLSInstanceMetadataOptionCmdlet.HttpPutResponseHopLimit">
            <summary>
            <para>
            <para>The desired HTTP PUT response hop limit for instance metadata requests. A larger number
            means that the instance metadata requests can travel farther. If no parameter is specified,
            the existing state is maintained.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.UpdateLSInstanceMetadataOptionCmdlet.HttpToken">
            <summary>
            <para>
            <para>The state of token usage for your instance metadata requests. If the parameter is
            not specified in the request, the default state is <c>optional</c>.</para><para>If the state is <c>optional</c>, you can choose whether to retrieve instance metadata
            with a signed token header on your request. If you retrieve the IAM role credentials
            without a token, the version 1.0 role credentials are returned. If you retrieve the
            IAM role credentials by using a valid signed token, the version 2.0 role credentials
            are returned.</para><para>If the state is <c>required</c>, you must send a signed token header with all instance
            metadata retrieval requests. In this state, retrieving the IAM role credential always
            returns the version 2.0 credentials. The version 1.0 credentials are not available.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.UpdateLSInstanceMetadataOptionCmdlet.InstanceName">
            <summary>
            <para>
            <para>The name of the instance for which to update metadata parameters.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.UpdateLSInstanceMetadataOptionCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Operation'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.UpdateInstanceMetadataOptionsResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.UpdateInstanceMetadataOptionsResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.UpdateLSInstanceMetadataOptionCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the InstanceName parameter.
            The -PassThru parameter is deprecated, use -Select '^InstanceName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.UpdateLSInstanceMetadataOptionCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.UpdateLSLoadBalancerAttributeCmdlet">
            <summary>
            Updates the specified attribute for a load balancer. You can only update one attribute
            at a time.
             
              
            <para>
            The <c>update load balancer attribute</c> operation supports tag-based access control
            via resource tags applied to the resource identified by <c>load balancer name</c>.
            For more information, see the <a href="https://lightsail.aws.amazon.com/ls/docs/en_us/articles/amazon-lightsail-controlling-access-using-tags">Amazon
            Lightsail Developer Guide</a>.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.UpdateLSLoadBalancerAttributeCmdlet.AttributeName">
            <summary>
            <para>
            <para>The name of the attribute you want to update.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.UpdateLSLoadBalancerAttributeCmdlet.AttributeValue">
            <summary>
            <para>
            <para>The value that you want to specify for the attribute name.</para><para>The following values are supported depending on what you specify for the <c>attributeName</c>
            request parameter:</para><ul><li><para>If you specify <c>HealthCheckPath</c> for the <c>attributeName</c> request parameter,
            then the <c>attributeValue</c> request parameter must be the path to ping on the target
            (for example, <c>/weather/us/wa/seattle</c>).</para></li><li><para>If you specify <c>SessionStickinessEnabled</c> for the <c>attributeName</c> request
            parameter, then the <c>attributeValue</c> request parameter must be <c>true</c> to
            activate session stickiness or <c>false</c> to deactivate session stickiness.</para></li><li><para>If you specify <c>SessionStickiness_LB_CookieDurationSeconds</c> for the <c>attributeName</c>
            request parameter, then the <c>attributeValue</c> request parameter must be an interger
            that represents the cookie duration in seconds.</para></li><li><para>If you specify <c>HttpsRedirectionEnabled</c> for the <c>attributeName</c> request
            parameter, then the <c>attributeValue</c> request parameter must be <c>true</c> to
            activate HTTP to HTTPS redirection or <c>false</c> to deactivate HTTP to HTTPS redirection.</para></li><li><para>If you specify <c>TlsPolicyName</c> for the <c>attributeName</c> request parameter,
            then the <c>attributeValue</c> request parameter must be the name of the TLS policy.</para><para>Use the <a href="https://docs.aws.amazon.com/lightsail/2016-11-28/api-reference/API_GetLoadBalancerTlsPolicies.html">GetLoadBalancerTlsPolicies</a>
            action to get a list of TLS policy names that you can specify.</para></li></ul>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.UpdateLSLoadBalancerAttributeCmdlet.LoadBalancerName">
            <summary>
            <para>
            <para>The name of the load balancer that you want to modify (<c>my-load-balancer</c>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.UpdateLSLoadBalancerAttributeCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Operations'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.UpdateLoadBalancerAttributeResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.UpdateLoadBalancerAttributeResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.UpdateLSLoadBalancerAttributeCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the LoadBalancerName parameter.
            The -PassThru parameter is deprecated, use -Select '^LoadBalancerName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.UpdateLSLoadBalancerAttributeCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.UpdateLSRelationalDatabaseCmdlet">
            <summary>
            Allows the update of one or more attributes of a database in Amazon Lightsail.
             
              
            <para>
            Updates are applied immediately, or in cases where the updates could result in an
            outage, are applied during the database's predefined maintenance window.
            </para><para>
            The <c>update relational database</c> operation supports tag-based access control
            via resource tags applied to the resource identified by relationalDatabaseName. For
            more information, see the <a href="https://lightsail.aws.amazon.com/ls/docs/en_us/articles/amazon-lightsail-controlling-access-using-tags">Amazon
            Lightsail Developer Guide</a>.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.UpdateLSRelationalDatabaseCmdlet.ApplyImmediately">
            <summary>
            <para>
            <para>When <c>true</c>, applies changes immediately. When <c>false</c>, applies changes
            during the preferred maintenance window. Some changes may cause an outage.</para><para>Default: <c>false</c></para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.UpdateLSRelationalDatabaseCmdlet.CaCertificateIdentifier">
            <summary>
            <para>
            <para>Indicates the certificate that needs to be associated with the database.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.UpdateLSRelationalDatabaseCmdlet.DisableBackupRetention">
            <summary>
            <para>
            <para>When <c>true</c>, disables automated backup retention for your database.</para><para>Disabling backup retention deletes all automated database backups. Before disabling
            this, you may want to create a snapshot of your database using the <c>create relational
            database snapshot</c> operation.</para><para>Updates are applied during the next maintenance window because this can result in
            an outage.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.UpdateLSRelationalDatabaseCmdlet.EnableBackupRetention">
            <summary>
            <para>
            <para>When <c>true</c>, enables automated backup retention for your database.</para><para>Updates are applied during the next maintenance window because this can result in
            an outage.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.UpdateLSRelationalDatabaseCmdlet.MasterUserPassword">
            <summary>
            <para>
            <para>The password for the master user. The password can include any printable ASCII character
            except "/", """, or "@".</para><para>My<b>SQL</b></para><para>Constraints: Must contain from 8 to 41 characters.</para><para><b>PostgreSQL</b></para><para>Constraints: Must contain from 8 to 128 characters.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.UpdateLSRelationalDatabaseCmdlet.PreferredBackupWindow">
            <summary>
            <para>
            <para>The daily time range during which automated backups are created for your database
            if automated backups are enabled.</para><para>Constraints:</para><ul><li><para>Must be in the <c>hh24:mi-hh24:mi</c> format.</para><para>Example: <c>16:00-16:30</c></para></li><li><para>Specified in Coordinated Universal Time (UTC).</para></li><li><para>Must not conflict with the preferred maintenance window.</para></li><li><para>Must be at least 30 minutes.</para></li></ul>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.UpdateLSRelationalDatabaseCmdlet.PreferredMaintenanceWindow">
            <summary>
            <para>
            <para>The weekly time range during which system maintenance can occur on your database.</para><para>The default is a 30-minute window selected at random from an 8-hour block of time
            for each Amazon Web Services Region, occurring on a random day of the week.</para><para>Constraints:</para><ul><li><para>Must be in the <c>ddd:hh24:mi-ddd:hh24:mi</c> format.</para></li><li><para>Valid days: Mon, Tue, Wed, Thu, Fri, Sat, Sun.</para></li><li><para>Must be at least 30 minutes.</para></li><li><para>Specified in Coordinated Universal Time (UTC).</para></li><li><para>Example: <c>Tue:17:00-Tue:17:30</c></para></li></ul>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.UpdateLSRelationalDatabaseCmdlet.PubliclyAccessible">
            <summary>
            <para>
            <para>Specifies the accessibility options for your database. A value of <c>true</c> specifies
            a database that is available to resources outside of your Lightsail account. A value
            of <c>false</c> specifies a database that is available only to your Lightsail resources
            in the same region as your database.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.UpdateLSRelationalDatabaseCmdlet.RelationalDatabaseBlueprintId">
            <summary>
            <para>
            <para>This parameter is used to update the major version of the database. Enter the <c>blueprintId</c>
            for the major version that you want to update to.</para><para>Use the <a href="https://docs.aws.amazon.com/lightsail/2016-11-28/api-reference/API_GetRelationalDatabaseBlueprints.html">GetRelationalDatabaseBlueprints</a>
            action to get a list of available blueprint IDs.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.UpdateLSRelationalDatabaseCmdlet.RelationalDatabaseName">
            <summary>
            <para>
            <para>The name of your Lightsail database resource to update.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.UpdateLSRelationalDatabaseCmdlet.RotateMasterUserPassword">
            <summary>
            <para>
            <para>When <c>true</c>, the master user password is changed to a new strong password generated
            by Lightsail.</para><para>Use the <c>get relational database master user password</c> operation to get the new
            password.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.UpdateLSRelationalDatabaseCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Operations'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.UpdateRelationalDatabaseResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.UpdateRelationalDatabaseResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.UpdateLSRelationalDatabaseCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the RelationalDatabaseName parameter.
            The -PassThru parameter is deprecated, use -Select '^RelationalDatabaseName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.UpdateLSRelationalDatabaseCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.LS.UpdateLSRelationalDatabaseParameterCmdlet">
            <summary>
            Allows the update of one or more parameters of a database in Amazon Lightsail.
             
              
            <para>
            Parameter updates don't cause outages; therefore, their application is not subject
            to the preferred maintenance window. However, there are two ways in which parameter
            updates are applied: <c>dynamic</c> or <c>pending-reboot</c>. Parameters marked with
            a <c>dynamic</c> apply type are applied immediately. Parameters marked with a <c>pending-reboot</c>
            apply type are applied only after the database is rebooted using the <c>reboot relational
            database</c> operation.
            </para><para>
            The <c>update relational database parameters</c> operation supports tag-based access
            control via resource tags applied to the resource identified by relationalDatabaseName.
            For more information, see the <a href="https://lightsail.aws.amazon.com/ls/docs/en_us/articles/amazon-lightsail-controlling-access-using-tags">Amazon
            Lightsail Developer Guide</a>.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.UpdateLSRelationalDatabaseParameterCmdlet.Parameter">
            <summary>
            <para>
            <para>The database parameters to update.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.UpdateLSRelationalDatabaseParameterCmdlet.RelationalDatabaseName">
            <summary>
            <para>
            <para>The name of your database for which to update parameters.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.UpdateLSRelationalDatabaseParameterCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Operations'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Lightsail.Model.UpdateRelationalDatabaseParametersResponse).
            Specifying the name of a property of type Amazon.Lightsail.Model.UpdateRelationalDatabaseParametersResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.UpdateLSRelationalDatabaseParameterCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the RelationalDatabaseName parameter.
            The -PassThru parameter is deprecated, use -Select '^RelationalDatabaseName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.LS.UpdateLSRelationalDatabaseParameterCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
    </members>
</doc>