AWS.Tools.Glacier.XML
|
<?xml version="1.0"?>
<doc> <assembly> <name>AWS.Tools.Glacier</name> </assembly> <members> <member name="T:Amazon.PowerShell.Cmdlets.GLC.ReadGLCOutputCmdlet"> <summary> <para> Downloads the output of a completed job and stores it in a file. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.ReadGLCOutputCmdlet.VaultName"> <summary> The name of the vault that will hold the uploaded content. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.ReadGLCOutputCmdlet.AccountId"> <summary> <para> AWS account ID of the account that owns the vault. You can either specify an AWS account ID or optionally a single '-' (hyphen), in which case Amazon S3 Glacier uses the AWS account ID associated with the credentials used to sign the request. If you use an account ID, do not include any hyphens ('-') in the ID. </para> <para>If a value for this parameter is not specified the cmdlet will use a default value of '<b>-</b>'.</para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.ReadGLCOutputCmdlet.JobId"> <summary> The ID of the previously submitted job that has completed, signalling that the output of the job is ready to be retrieved. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.ReadGLCOutputCmdlet.FilePath"> <summary> The full path to the local file that will contain the archive contents. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.GLC.FileUploadResult"> <summary> Output object carrying the file we uploaded, the corresponding archive id (needed for later retrieval) and the upload checksum. </summary> <remarks> We could use a PSObject wrapping the UploadResult and adding a note property for the filename, but the note property doesn't get displayed by default. Using a concrete class solves this problem. </remarks> </member> <member name="T:Amazon.PowerShell.Cmdlets.GLC.WriteGLCArchiveCmdlet"> <summary> <para> Uploads a single file, or collection of files in a folder hierarchy, to a vault in Amazon Glacier. </para> <para> The cmdlet will automatically attempt to use multipart upload to fulfill the request depending on the size of each file being uploaded. If a multipart upload is interrupted the cmdlet will attempt to abort the multipart upload on your behalf. Under certain circumstances (network outage, power failure, etc.) the cmdlet may not be able to abort the multipart upload. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.WriteGLCArchiveCmdlet.VaultName"> <summary> The name of the vault that will hold the uploaded content. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.WriteGLCArchiveCmdlet.AccountId"> <summary> <para> AWS account ID of the account that owns the vault. You can either specify an AWS account ID or optionally a single '-' (hyphen), in which case Amazon S3 Glacier uses the AWS account ID associated with the credentials used to sign the request. If you use an account ID, do not include any hyphens ('-') in the ID. </para> <para>If a value for this parameter is not specified the cmdlet will use a default value of '<b>-</b>'.</para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.WriteGLCArchiveCmdlet.FilePath"> <summary> The full path to the local file to be uploaded. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.WriteGLCArchiveCmdlet.Description"> <summary> Optional description to apply to the uploaded archive. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.WriteGLCArchiveCmdlet.FolderPath"> <summary> The full path to a local folder. All files in the folder will be uploaded to the specified vault. Files contained in sub-folders of the specified folder will only be uploaded if the -Recurse switch is specified. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.WriteGLCArchiveCmdlet.Recurse"> <summary> If set, all sub-folders beneath the folder specified in -Folder will also be uploaded. Defaults off [false]. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.WriteGLCArchiveCmdlet.SearchPattern"> <summary> Optional search pattern to control which files in the specified folder path are uploaded to the vault. By default all files are processed. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.WriteGLCArchiveCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.GLC.AddGLCTagsToVaultCmdlet"> <summary> This operation adds the specified tags to a vault. Each tag is composed of a key and a value. Each vault can have up to 10 tags. If your request would cause the tag limit for the vault to be exceeded, the operation throws the <code>LimitExceededException</code> error. If a tag already exists on the vault under a specified key, the existing key value will be overwritten. For more information about tags, see <a href="https://docs.aws.amazon.com/amazonglacier/latest/dev/tagging.html">Tagging Amazon S3 Glacier Resources</a>. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.AddGLCTagsToVaultCmdlet.AccountId"> <summary> <para> <para>The <code>AccountId</code> value is the AWS account ID of the account that owns the vault. You can either specify an AWS account ID or optionally a single '<code>-</code>' (hyphen), in which case Amazon S3 Glacier uses the AWS account ID associated with the credentials used to sign the request. If you use an account ID, do not include any hyphens ('-') in the ID.</para> </para> <para>If a value for this parameter is not specified the cmdlet will use a default value of '<b>-</b>'.</para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.AddGLCTagsToVaultCmdlet.Tag"> <summary> <para> <para>The tags to add to the vault. Each tag is composed of a key and a value. The value can be an empty string.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.AddGLCTagsToVaultCmdlet.VaultName"> <summary> <para> <para>The name of the vault.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.AddGLCTagsToVaultCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Glacier.Model.AddTagsToVaultResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.AddGLCTagsToVaultCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the VaultName parameter. The -PassThru parameter is deprecated, use -Select '^VaultName' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.AddGLCTagsToVaultCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.GLC.CompleteGLCVaultLockCmdlet"> <summary> This operation completes the vault locking process by transitioning the vault lock from the <code>InProgress</code> state to the <code>Locked</code> state, which causes the vault lock policy to become unchangeable. A vault lock is put into the <code>InProgress</code> state by calling <a>InitiateVaultLock</a>. You can obtain the state of the vault lock by calling <a>GetVaultLock</a>. For more information about the vault locking process, <a href="https://docs.aws.amazon.com/amazonglacier/latest/dev/vault-lock.html">Amazon Glacier Vault Lock</a>. <para> This operation is idempotent. This request is always successful if the vault lock is in the <code>Locked</code> state and the provided lock ID matches the lock ID originally used to lock the vault. </para><para> If an invalid lock ID is passed in the request when the vault lock is in the <code>Locked</code> state, the operation returns an <code>AccessDeniedException</code> error. If an invalid lock ID is passed in the request when the vault lock is in the <code>InProgress</code> state, the operation throws an <code>InvalidParameter</code> error. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.CompleteGLCVaultLockCmdlet.AccountId"> <summary> <para> <para>The <code>AccountId</code> value is the AWS account ID. This value must match the AWS account ID associated with the credentials used to sign the request. You can either specify an AWS account ID or optionally a single '<code>-</code>' (hyphen), in which case Amazon Glacier uses the AWS account ID associated with the credentials used to sign the request. If you specify your account ID, do not include any hyphens ('-') in the ID.</para> </para> <para>If a value for this parameter is not specified the cmdlet will use a default value of '<b>-</b>'.</para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.CompleteGLCVaultLockCmdlet.LockId"> <summary> <para> <para>The <code>lockId</code> value is the lock ID obtained from a <a>InitiateVaultLock</a> request.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.CompleteGLCVaultLockCmdlet.VaultName"> <summary> <para> <para>The name of the vault.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.CompleteGLCVaultLockCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Glacier.Model.CompleteVaultLockResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.CompleteGLCVaultLockCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the LockId parameter. The -PassThru parameter is deprecated, use -Select '^LockId' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.CompleteGLCVaultLockCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.GLC.GetGLCDataRetrievalPolicyCmdlet"> <summary> This operation returns the current data retrieval policy for the account and region specified in the GET request. For more information about data retrieval policies, see <a href="https://docs.aws.amazon.com/amazonglacier/latest/dev/data-retrieval-policy.html">Amazon Glacier Data Retrieval Policies</a>. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.GetGLCDataRetrievalPolicyCmdlet.AccountId"> <summary> <para> <para>The <code>AccountId</code> value is the AWS account ID. This value must match the AWS account ID associated with the credentials used to sign the request. You can either specify an AWS account ID or optionally a single '<code>-</code>' (hyphen), in which case Amazon Glacier uses the AWS account ID associated with the credentials used to sign the request. If you specify your account ID, do not include any hyphens ('-') in the ID. </para> </para> <para>If a value for this parameter is not specified the cmdlet will use a default value of '<b>-</b>'.</para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.GetGLCDataRetrievalPolicyCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'Policy'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Glacier.Model.GetDataRetrievalPolicyResponse). Specifying the name of a property of type Amazon.Glacier.Model.GetDataRetrievalPolicyResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.GetGLCDataRetrievalPolicyCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the AccountId parameter. The -PassThru parameter is deprecated, use -Select '^AccountId' instead. This parameter will be removed in a future version. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.GLC.GetGLCJobCmdlet"> <summary> This operation returns information about a job you previously initiated, including the job initiation date, the user who initiated the job, the job status code/message and the Amazon SNS topic to notify after Amazon S3 Glacier (Glacier) completes the job. For more information about initiating a job, see <a>InitiateJob</a>. <note><para> This operation enables you to check the status of your job. However, it is strongly recommended that you set up an Amazon SNS topic and specify it in your initiate job request so that Glacier can notify the topic after it completes the job. </para></note><para> A job ID will not expire for at least 24 hours after Glacier completes the job. </para><para> An AWS account has full permission to perform all operations (actions). However, AWS Identity and Access Management (IAM) users don't have any permissions by default. You must grant them explicit permission to perform specific actions. For more information, see <a href="https://docs.aws.amazon.com/amazonglacier/latest/dev/using-iam-with-amazon-glacier.html">Access Control Using AWS Identity and Access Management (IAM)</a>. </para><para> For more information about using this operation, see the documentation for the underlying REST API <a href="https://docs.aws.amazon.com/amazonglacier/latest/dev/api-describe-job-get.html">Describe Job</a> in the <i>Amazon Glacier Developer Guide</i>. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.GetGLCJobCmdlet.AccountId"> <summary> <para> <para>The <code>AccountId</code> value is the AWS account ID of the account that owns the vault. You can either specify an AWS account ID or optionally a single '<code>-</code>' (hyphen), in which case Amazon S3 Glacier uses the AWS account ID associated with the credentials used to sign the request. If you use an account ID, do not include any hyphens ('-') in the ID. </para> </para> <para>If a value for this parameter is not specified the cmdlet will use a default value of '<b>-</b>'.</para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.GetGLCJobCmdlet.JobId"> <summary> <para> <para>The ID of the job to describe.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.GetGLCJobCmdlet.VaultName"> <summary> <para> <para>The name of the vault.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.GetGLCJobCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is '*'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Glacier.Model.DescribeJobResponse). Specifying the name of a property of type Amazon.Glacier.Model.DescribeJobResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.GetGLCJobCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the JobId parameter. The -PassThru parameter is deprecated, use -Select '^JobId' instead. This parameter will be removed in a future version. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.GLC.GetGLCJobListCmdlet"> <summary> This operation lists jobs for a vault, including jobs that are in-progress and jobs that have recently finished. The List Job operation returns a list of these jobs sorted by job initiation time. <note><para> Amazon Glacier retains recently completed jobs for a period before deleting them; however, it eventually removes completed jobs. The output of completed jobs can be retrieved. Retaining completed jobs for a period of time after they have completed enables you to get a job output in the event you miss the job completion notification or your first attempt to download it fails. For example, suppose you start an archive retrieval job to download an archive. After the job completes, you start to download the archive but encounter a network error. In this scenario, you can retry and download the archive while the job exists. </para></note><para> The List Jobs operation supports pagination. You should always check the response <code>Marker</code> field. If there are no more jobs to list, the <code>Marker</code> field is set to <code>null</code>. If there are more jobs to list, the <code>Marker</code> field is set to a non-null value, which you can use to continue the pagination of the list. To return a list of jobs that begins at a specific job, set the marker request parameter to the <code>Marker</code> value for that job that you obtained from a previous List Jobs request. </para><para> You can set a maximum limit for the number of jobs returned in the response by specifying the <code>limit</code> parameter in the request. The default limit is 50. The number of jobs returned might be fewer than the limit, but the number of returned jobs never exceeds the limit. </para><para> Additionally, you can filter the jobs list returned by specifying the optional <code>statuscode</code> parameter or <code>completed</code> parameter, or both. Using the <code>statuscode</code> parameter, you can specify to return only jobs that match either the <code>InProgress</code>, <code>Succeeded</code>, or <code>Failed</code> status. Using the <code>completed</code> parameter, you can specify to return only jobs that were completed (<code>true</code>) or jobs that were not completed (<code>false</code>). </para><para> For more information about using this operation, see the documentation for the underlying REST API <a href="https://docs.aws.amazon.com/amazonglacier/latest/dev/api-jobs-get.html">List Jobs</a>. </para><br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.GetGLCJobListCmdlet.AccountId"> <summary> <para> <para>The <code>AccountId</code> value is the AWS account ID of the account that owns the vault. You can either specify an AWS account ID or optionally a single '<code>-</code>' (hyphen), in which case Amazon S3 Glacier uses the AWS account ID associated with the credentials used to sign the request. If you use an account ID, do not include any hyphens ('-') in the ID. </para> </para> <para>If a value for this parameter is not specified the cmdlet will use a default value of '<b>-</b>'.</para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.GetGLCJobListCmdlet.Completed"> <summary> <para> <para>The state of the jobs to return. You can specify <code>true</code> or <code>false</code>.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.GetGLCJobListCmdlet.Statuscode"> <summary> <para> <para>The type of job status to return. You can specify the following values: <code>InProgress</code>, <code>Succeeded</code>, or <code>Failed</code>.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.GetGLCJobListCmdlet.VaultName"> <summary> <para> <para>The name of the vault.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.GetGLCJobListCmdlet.Limit"> <summary> <para> <para>The maximum number of jobs to be returned. The default limit is 50. The number of jobs returned might be fewer than the specified limit, but the number of returned jobs never exceeds the limit.</para> </para> <para> <br/><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet. <br/>In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call. <br/>Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned. </para> <para>If a value for this parameter is not specified the cmdlet will use a default value of '<b>50</b>'.</para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.GetGLCJobListCmdlet.Marker"> <summary> <para> <para>An opaque string used for pagination. This value specifies the job at which the listing of jobs should begin. Get the marker value from a previous List Jobs response. You only need to include the marker if you are continuing the pagination of results started in a previous List Jobs request.</para> </para> <para> <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call. <br/>In order to manually control output pagination, use '-Marker $null' for the first call and '-Marker $AWSHistory.LastServiceResponse.Marker' for subsequent calls. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.GetGLCJobListCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'JobList'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Glacier.Model.ListJobsResponse). Specifying the name of a property of type Amazon.Glacier.Model.ListJobsResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.GetGLCJobListCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the VaultName parameter. The -PassThru parameter is deprecated, use -Select '^VaultName' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.GetGLCJobListCmdlet.NoAutoIteration"> <summary> By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of Marker as the start point. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.GLC.GetGLCMultipartUploadListCmdlet"> <summary> This operation lists in-progress multipart uploads for the specified vault. An in-progress multipart upload is a multipart upload that has been initiated by an <a>InitiateMultipartUpload</a> request, but has not yet been completed or aborted. The list returned in the List Multipart Upload response has no guaranteed order. <para> The List Multipart Uploads operation supports pagination. By default, this operation returns up to 50 multipart uploads in the response. You should always check the response for a <code>marker</code> at which to continue the list; if there are no more items the <code>marker</code> is <code>null</code>. To return a list of multipart uploads that begins at a specific upload, set the <code>marker</code> request parameter to the value you obtained from a previous List Multipart Upload request. You can also limit the number of uploads returned in the response by specifying the <code>limit</code> parameter in the request. </para><para> Note the difference between this operation and listing parts (<a>ListParts</a>). The List Multipart Uploads operation lists all multipart uploads for a vault and does not require a multipart upload ID. The List Parts operation requires a multipart upload ID since parts are associated with a single upload. </para><para> An AWS account has full permission to perform all operations (actions). However, AWS Identity and Access Management (IAM) users don't have any permissions by default. You must grant them explicit permission to perform specific actions. For more information, see <a href="https://docs.aws.amazon.com/amazonglacier/latest/dev/using-iam-with-amazon-glacier.html">Access Control Using AWS Identity and Access Management (IAM)</a>. </para><para> For conceptual information and the underlying REST API, see <a href="https://docs.aws.amazon.com/amazonglacier/latest/dev/working-with-archives.html">Working with Archives in Amazon S3 Glacier</a> and <a href="https://docs.aws.amazon.com/amazonglacier/latest/dev/api-multipart-list-uploads.html">List Multipart Uploads </a> in the <i>Amazon Glacier Developer Guide</i>. </para><br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.GetGLCMultipartUploadListCmdlet.AccountId"> <summary> <para> <para>The <code>AccountId</code> value is the AWS account ID of the account that owns the vault. You can either specify an AWS account ID or optionally a single '<code>-</code>' (hyphen), in which case Amazon S3 Glacier uses the AWS account ID associated with the credentials used to sign the request. If you use an account ID, do not include any hyphens ('-') in the ID. </para> </para> <para>If a value for this parameter is not specified the cmdlet will use a default value of '<b>-</b>'.</para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.GetGLCMultipartUploadListCmdlet.VaultName"> <summary> <para> <para>The name of the vault.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.GetGLCMultipartUploadListCmdlet.Limit"> <summary> <para> <para>Specifies the maximum number of uploads returned in the response body. If this value is not specified, the List Uploads operation returns up to 50 uploads.</para> </para> <para> <br/><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet. <br/>In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call. <br/>Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned. </para> <para>If a value for this parameter is not specified the cmdlet will use a default value of '<b>50</b>'.</para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.GetGLCMultipartUploadListCmdlet.UploadIdMarker"> <summary> <para> <para>An opaque string used for pagination. This value specifies the upload at which the listing of uploads should begin. Get the marker value from a previous List Uploads response. You need only include the marker if you are continuing the pagination of results started in a previous List Uploads request.</para> </para> <para> <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call. <br/>In order to manually control output pagination, use '-UploadIdMarker $null' for the first call and '-UploadIdMarker $AWSHistory.LastServiceResponse.Marker' for subsequent calls. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.GetGLCMultipartUploadListCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'UploadsList'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Glacier.Model.ListMultipartUploadsResponse). Specifying the name of a property of type Amazon.Glacier.Model.ListMultipartUploadsResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.GetGLCMultipartUploadListCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the VaultName parameter. The -PassThru parameter is deprecated, use -Select '^VaultName' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.GetGLCMultipartUploadListCmdlet.NoAutoIteration"> <summary> By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of UploadIdMarker as the start point. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.GLC.GetGLCProvisionedCapacityListCmdlet"> <summary> This operation lists the provisioned capacity units for the specified AWS account. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.GetGLCProvisionedCapacityListCmdlet.AccountId"> <summary> <para> <para>The AWS account ID of the account that owns the vault. You can either specify an AWS account ID or optionally a single '-' (hyphen), in which case Amazon S3 Glacier uses the AWS account ID associated with the credentials used to sign the request. If you use an account ID, don't include any hyphens ('-') in the ID. </para> </para> <para>If a value for this parameter is not specified the cmdlet will use a default value of '<b>-</b>'.</para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.GetGLCProvisionedCapacityListCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'ProvisionedCapacityList'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Glacier.Model.ListProvisionedCapacityResponse). Specifying the name of a property of type Amazon.Glacier.Model.ListProvisionedCapacityResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.GetGLCProvisionedCapacityListCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the AccountId parameter. The -PassThru parameter is deprecated, use -Select '^AccountId' instead. This parameter will be removed in a future version. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.GLC.GetGLCVaultCmdlet"> <summary> This operation returns information about a vault, including the vault's Amazon Resource Name (ARN), the date the vault was created, the number of archives it contains, and the total size of all the archives in the vault. The number of archives and their total size are as of the last inventory generation. This means that if you add or remove an archive from a vault, and then immediately use Describe Vault, the change in contents will not be immediately reflected. If you want to retrieve the latest inventory of the vault, use <a>InitiateJob</a>. Amazon S3 Glacier generates vault inventories approximately daily. For more information, see <a href="https://docs.aws.amazon.com/amazonglacier/latest/dev/vault-inventory.html">Downloading a Vault Inventory in Amazon S3 Glacier</a>. <para> An AWS account has full permission to perform all operations (actions). However, AWS Identity and Access Management (IAM) users don't have any permissions by default. You must grant them explicit permission to perform specific actions. For more information, see <a href="https://docs.aws.amazon.com/amazonglacier/latest/dev/using-iam-with-amazon-glacier.html">Access Control Using AWS Identity and Access Management (IAM)</a>. </para><para> For conceptual information and underlying REST API, see <a href="https://docs.aws.amazon.com/amazonglacier/latest/dev/retrieving-vault-info.html">Retrieving Vault Metadata in Amazon S3 Glacier</a> and <a href="https://docs.aws.amazon.com/amazonglacier/latest/dev/api-vault-get.html">Describe Vault </a> in the <i>Amazon Glacier Developer Guide</i>. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.GetGLCVaultCmdlet.AccountId"> <summary> <para> <para>The <code>AccountId</code> value is the AWS account ID of the account that owns the vault. You can either specify an AWS account ID or optionally a single '<code>-</code>' (hyphen), in which case Amazon S3 Glacier uses the AWS account ID associated with the credentials used to sign the request. If you use an account ID, do not include any hyphens ('-') in the ID. </para> </para> <para>If a value for this parameter is not specified the cmdlet will use a default value of '<b>-</b>'.</para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.GetGLCVaultCmdlet.VaultName"> <summary> <para> <para>The name of the vault.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.GetGLCVaultCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is '*'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Glacier.Model.DescribeVaultResponse). Specifying the name of a property of type Amazon.Glacier.Model.DescribeVaultResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.GetGLCVaultCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the VaultName parameter. The -PassThru parameter is deprecated, use -Select '^VaultName' instead. This parameter will be removed in a future version. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.GLC.GetGLCVaultAccessPolicyCmdlet"> <summary> This operation retrieves the <code>access-policy</code> subresource set on the vault; for more information on setting this subresource, see <a href="https://docs.aws.amazon.com/amazonglacier/latest/dev/api-SetVaultAccessPolicy.html">Set Vault Access Policy (PUT access-policy)</a>. If there is no access policy set on the vault, the operation returns a <code>404 Not found</code> error. For more information about vault access policies, see <a href="https://docs.aws.amazon.com/amazonglacier/latest/dev/vault-access-policy.html">Amazon Glacier Access Control with Vault Access Policies</a>. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.GetGLCVaultAccessPolicyCmdlet.AccountId"> <summary> <para> <para>The <code>AccountId</code> value is the AWS account ID of the account that owns the vault. You can either specify an AWS account ID or optionally a single '<code>-</code>' (hyphen), in which case Amazon S3 Glacier uses the AWS account ID associated with the credentials used to sign the request. If you use an account ID, do not include any hyphens ('-') in the ID.</para> </para> <para>If a value for this parameter is not specified the cmdlet will use a default value of '<b>-</b>'.</para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.GetGLCVaultAccessPolicyCmdlet.VaultName"> <summary> <para> <para>The name of the vault.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.GetGLCVaultAccessPolicyCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'Policy'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Glacier.Model.GetVaultAccessPolicyResponse). Specifying the name of a property of type Amazon.Glacier.Model.GetVaultAccessPolicyResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.GetGLCVaultAccessPolicyCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the VaultName parameter. The -PassThru parameter is deprecated, use -Select '^VaultName' instead. This parameter will be removed in a future version. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.GLC.GetGLCVaultListCmdlet"> <summary> This operation lists all vaults owned by the calling user's account. The list returned in the response is ASCII-sorted by vault name. <para> By default, this operation returns up to 10 items. If there are more vaults to list, the response <code>marker</code> field contains the vault Amazon Resource Name (ARN) at which to continue the list with a new List Vaults request; otherwise, the <code>marker</code> field is <code>null</code>. To return a list of vaults that begins at a specific vault, set the <code>marker</code> request parameter to the vault ARN you obtained from a previous List Vaults request. You can also limit the number of vaults returned in the response by specifying the <code>limit</code> parameter in the request. </para><para> An AWS account has full permission to perform all operations (actions). However, AWS Identity and Access Management (IAM) users don't have any permissions by default. You must grant them explicit permission to perform specific actions. For more information, see <a href="https://docs.aws.amazon.com/amazonglacier/latest/dev/using-iam-with-amazon-glacier.html">Access Control Using AWS Identity and Access Management (IAM)</a>. </para><para> For conceptual information and underlying REST API, see <a href="https://docs.aws.amazon.com/amazonglacier/latest/dev/retrieving-vault-info.html">Retrieving Vault Metadata in Amazon S3 Glacier</a> and <a href="https://docs.aws.amazon.com/amazonglacier/latest/dev/api-vaults-get.html">List Vaults </a> in the <i>Amazon Glacier Developer Guide</i>. </para><br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.GetGLCVaultListCmdlet.AccountId"> <summary> <para> <para>The <code>AccountId</code> value is the AWS account ID. This value must match the AWS account ID associated with the credentials used to sign the request. You can either specify an AWS account ID or optionally a single '<code>-</code>' (hyphen), in which case Amazon Glacier uses the AWS account ID associated with the credentials used to sign the request. If you specify your account ID, do not include any hyphens ('-') in the ID.</para> </para> <para>If a value for this parameter is not specified the cmdlet will use a default value of '<b>-</b>'.</para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.GetGLCVaultListCmdlet.Limit"> <summary> <para> <para>The maximum number of vaults to be returned. The default limit is 10. The number of vaults returned might be fewer than the specified limit, but the number of returned vaults never exceeds the limit.</para> </para> <para> <br/><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet. <br/>In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call. <br/>Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned. </para> <para>If a value for this parameter is not specified the cmdlet will use a default value of '<b>50</b>'.</para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.GetGLCVaultListCmdlet.Marker"> <summary> <para> <para>A string used for pagination. The marker specifies the vault ARN after which the listing of vaults should begin.</para> </para> <para> <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call. <br/>In order to manually control output pagination, use '-Marker $null' for the first call and '-Marker $AWSHistory.LastServiceResponse.Marker' for subsequent calls. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.GetGLCVaultListCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'VaultList'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Glacier.Model.ListVaultsResponse). Specifying the name of a property of type Amazon.Glacier.Model.ListVaultsResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.GetGLCVaultListCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the AccountId parameter. The -PassThru parameter is deprecated, use -Select '^AccountId' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.GetGLCVaultListCmdlet.NoAutoIteration"> <summary> By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of Marker as the start point. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.GLC.GetGLCVaultLockCmdlet"> <summary> This operation retrieves the following attributes from the <code>lock-policy</code> subresource set on the specified vault: <ul><li><para> The vault lock policy set on the vault. </para></li><li><para> The state of the vault lock, which is either <code>InProgess</code> or <code>Locked</code>. </para></li><li><para> When the lock ID expires. The lock ID is used to complete the vault locking process. </para></li><li><para> When the vault lock was initiated and put into the <code>InProgress</code> state. </para></li></ul><para> A vault lock is put into the <code>InProgress</code> state by calling <a>InitiateVaultLock</a>. A vault lock is put into the <code>Locked</code> state by calling <a>CompleteVaultLock</a>. You can abort the vault locking process by calling <a>AbortVaultLock</a>. For more information about the vault locking process, <a href="https://docs.aws.amazon.com/amazonglacier/latest/dev/vault-lock.html">Amazon Glacier Vault Lock</a>. </para><para> If there is no vault lock policy set on the vault, the operation returns a <code>404 Not found</code> error. For more information about vault lock policies, <a href="https://docs.aws.amazon.com/amazonglacier/latest/dev/vault-lock-policy.html">Amazon Glacier Access Control with Vault Lock Policies</a>. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.GetGLCVaultLockCmdlet.AccountId"> <summary> <para> <para>The <code>AccountId</code> value is the AWS account ID of the account that owns the vault. You can either specify an AWS account ID or optionally a single '<code>-</code>' (hyphen), in which case Amazon S3 Glacier uses the AWS account ID associated with the credentials used to sign the request. If you use an account ID, do not include any hyphens ('-') in the ID.</para> </para> <para>If a value for this parameter is not specified the cmdlet will use a default value of '<b>-</b>'.</para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.GetGLCVaultLockCmdlet.VaultName"> <summary> <para> <para>The name of the vault.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.GetGLCVaultLockCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is '*'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Glacier.Model.GetVaultLockResponse). Specifying the name of a property of type Amazon.Glacier.Model.GetVaultLockResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.GetGLCVaultLockCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the VaultName parameter. The -PassThru parameter is deprecated, use -Select '^VaultName' instead. This parameter will be removed in a future version. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.GLC.GetGLCVaultNotificationCmdlet"> <summary> This operation retrieves the <code>notification-configuration</code> subresource of the specified vault. <para> For information about setting a notification configuration on a vault, see <a>SetVaultNotifications</a>. If a notification configuration for a vault is not set, the operation returns a <code>404 Not Found</code> error. For more information about vault notifications, see <a href="https://docs.aws.amazon.com/amazonglacier/latest/dev/configuring-notifications.html">Configuring Vault Notifications in Amazon S3 Glacier</a>. </para><para> An AWS account has full permission to perform all operations (actions). However, AWS Identity and Access Management (IAM) users don't have any permissions by default. You must grant them explicit permission to perform specific actions. For more information, see <a href="https://docs.aws.amazon.com/amazonglacier/latest/dev/using-iam-with-amazon-glacier.html">Access Control Using AWS Identity and Access Management (IAM)</a>. </para><para> For conceptual information and underlying REST API, see <a href="https://docs.aws.amazon.com/amazonglacier/latest/dev/configuring-notifications.html">Configuring Vault Notifications in Amazon S3 Glacier</a> and <a href="https://docs.aws.amazon.com/amazonglacier/latest/dev/api-vault-notifications-get.html">Get Vault Notification Configuration </a> in the <i>Amazon Glacier Developer Guide</i>. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.GetGLCVaultNotificationCmdlet.AccountId"> <summary> <para> <para>The <code>AccountId</code> value is the AWS account ID of the account that owns the vault. You can either specify an AWS account ID or optionally a single '<code>-</code>' (hyphen), in which case Amazon S3 Glacier uses the AWS account ID associated with the credentials used to sign the request. If you use an account ID, do not include any hyphens ('-') in the ID.</para> </para> <para>If a value for this parameter is not specified the cmdlet will use a default value of '<b>-</b>'.</para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.GetGLCVaultNotificationCmdlet.VaultName"> <summary> <para> <para>The name of the vault.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.GetGLCVaultNotificationCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'VaultNotificationConfig'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Glacier.Model.GetVaultNotificationsResponse). Specifying the name of a property of type Amazon.Glacier.Model.GetVaultNotificationsResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.GetGLCVaultNotificationCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the VaultName parameter. The -PassThru parameter is deprecated, use -Select '^VaultName' instead. This parameter will be removed in a future version. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.GLC.GetGLCVaultTagListCmdlet"> <summary> This operation lists all the tags attached to a vault. The operation returns an empty map if there are no tags. For more information about tags, see <a href="https://docs.aws.amazon.com/amazonglacier/latest/dev/tagging.html">Tagging Amazon S3 Glacier Resources</a>. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.GetGLCVaultTagListCmdlet.AccountId"> <summary> <para> <para>The <code>AccountId</code> value is the AWS account ID of the account that owns the vault. You can either specify an AWS account ID or optionally a single '<code>-</code>' (hyphen), in which case Amazon S3 Glacier uses the AWS account ID associated with the credentials used to sign the request. If you use an account ID, do not include any hyphens ('-') in the ID.</para> </para> <para>If a value for this parameter is not specified the cmdlet will use a default value of '<b>-</b>'.</para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.GetGLCVaultTagListCmdlet.VaultName"> <summary> <para> <para>The name of the vault.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.GetGLCVaultTagListCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'Tags'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Glacier.Model.ListTagsForVaultResponse). Specifying the name of a property of type Amazon.Glacier.Model.ListTagsForVaultResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.GetGLCVaultTagListCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the VaultName parameter. The -PassThru parameter is deprecated, use -Select '^VaultName' instead. This parameter will be removed in a future version. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.GLC.NewGLCProvisionedCapacityPurchaseCmdlet"> <summary> This operation purchases a provisioned capacity unit for an AWS account. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.NewGLCProvisionedCapacityPurchaseCmdlet.AccountId"> <summary> <para> <para>The AWS account ID of the account that owns the vault. You can either specify an AWS account ID or optionally a single '-' (hyphen), in which case Amazon S3 Glacier uses the AWS account ID associated with the credentials used to sign the request. If you use an account ID, don't include any hyphens ('-') in the ID. </para> </para> <para>If a value for this parameter is not specified the cmdlet will use a default value of '<b>-</b>'.</para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.NewGLCProvisionedCapacityPurchaseCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'CapacityId'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Glacier.Model.PurchaseProvisionedCapacityResponse). Specifying the name of a property of type Amazon.Glacier.Model.PurchaseProvisionedCapacityResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.NewGLCProvisionedCapacityPurchaseCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the AccountId parameter. The -PassThru parameter is deprecated, use -Select '^AccountId' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.NewGLCProvisionedCapacityPurchaseCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.GLC.NewGLCVaultCmdlet"> <summary> This operation creates a new vault with the specified name. The name of the vault must be unique within a region for an AWS account. You can create up to 1,000 vaults per account. If you need to create more vaults, contact Amazon S3 Glacier. <para> You must use the following guidelines when naming a vault. </para><ul><li><para> Names can be between 1 and 255 characters long. </para></li><li><para> Allowed characters are a-z, A-Z, 0-9, '_' (underscore), '-' (hyphen), and '.' (period). </para></li></ul><para> This operation is idempotent. </para><para> An AWS account has full permission to perform all operations (actions). However, AWS Identity and Access Management (IAM) users don't have any permissions by default. You must grant them explicit permission to perform specific actions. For more information, see <a href="https://docs.aws.amazon.com/amazonglacier/latest/dev/using-iam-with-amazon-glacier.html">Access Control Using AWS Identity and Access Management (IAM)</a>. </para><para> For conceptual information and underlying REST API, see <a href="https://docs.aws.amazon.com/amazonglacier/latest/dev/creating-vaults.html">Creating a Vault in Amazon Glacier</a> and <a href="https://docs.aws.amazon.com/amazonglacier/latest/dev/api-vault-put.html">Create Vault </a> in the <i>Amazon Glacier Developer Guide</i>. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.NewGLCVaultCmdlet.AccountId"> <summary> <para> <para>The <code>AccountId</code> value is the AWS account ID. This value must match the AWS account ID associated with the credentials used to sign the request. You can either specify an AWS account ID or optionally a single '<code>-</code>' (hyphen), in which case Amazon S3 Glacier uses the AWS account ID associated with the credentials used to sign the request. If you specify your account ID, do not include any hyphens ('-') in the ID.</para> </para> <para>If a value for this parameter is not specified the cmdlet will use a default value of '<b>-</b>'.</para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.NewGLCVaultCmdlet.VaultName"> <summary> <para> <para>The name of the vault.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.NewGLCVaultCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'Location'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Glacier.Model.CreateVaultResponse). Specifying the name of a property of type Amazon.Glacier.Model.CreateVaultResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.NewGLCVaultCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the VaultName parameter. The -PassThru parameter is deprecated, use -Select '^VaultName' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.NewGLCVaultCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.GLC.RemoveGLCArchiveCmdlet"> <summary> This operation deletes an archive from a vault. Subsequent requests to initiate a retrieval of this archive will fail. Archive retrievals that are in progress for this archive ID may or may not succeed according to the following scenarios: <ul><li><para> If the archive retrieval job is actively preparing the data for download when Amazon S3 Glacier receives the delete archive request, the archival retrieval operation might fail. </para></li><li><para> If the archive retrieval job has successfully prepared the archive for download when Amazon S3 Glacier receives the delete archive request, you will be able to download the output. </para></li></ul><para> This operation is idempotent. Attempting to delete an already-deleted archive does not result in an error. </para><para> An AWS account has full permission to perform all operations (actions). However, AWS Identity and Access Management (IAM) users don't have any permissions by default. You must grant them explicit permission to perform specific actions. For more information, see <a href="https://docs.aws.amazon.com/amazonglacier/latest/dev/using-iam-with-amazon-glacier.html">Access Control Using AWS Identity and Access Management (IAM)</a>. </para><para> For conceptual information and underlying REST API, see <a href="https://docs.aws.amazon.com/amazonglacier/latest/dev/deleting-an-archive.html">Deleting an Archive in Amazon Glacier</a> and <a href="https://docs.aws.amazon.com/amazonglacier/latest/dev/api-archive-delete.html">Delete Archive</a> in the <i>Amazon Glacier Developer Guide</i>. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.RemoveGLCArchiveCmdlet.AccountId"> <summary> <para> <para>The <code>AccountId</code> value is the AWS account ID of the account that owns the vault. You can either specify an AWS account ID or optionally a single '<code>-</code>' (hyphen), in which case Amazon S3 Glacier uses the AWS account ID associated with the credentials used to sign the request. If you use an account ID, do not include any hyphens ('-') in the ID.</para> </para> <para>If a value for this parameter is not specified the cmdlet will use a default value of '<b>-</b>'.</para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.RemoveGLCArchiveCmdlet.ArchiveId"> <summary> <para> <para>The ID of the archive to delete.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.RemoveGLCArchiveCmdlet.VaultName"> <summary> <para> <para>The name of the vault.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.RemoveGLCArchiveCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Glacier.Model.DeleteArchiveResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.RemoveGLCArchiveCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the ArchiveId parameter. The -PassThru parameter is deprecated, use -Select '^ArchiveId' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.RemoveGLCArchiveCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.GLC.RemoveGLCMultipartUploadCmdlet"> <summary> This operation aborts a multipart upload identified by the upload ID. <para> After the Abort Multipart Upload request succeeds, you cannot upload any more parts to the multipart upload or complete the multipart upload. Aborting a completed upload fails. However, aborting an already-aborted upload will succeed, for a short time. For more information about uploading a part and completing a multipart upload, see <a>UploadMultipartPart</a> and <a>CompleteMultipartUpload</a>. </para><para> This operation is idempotent. </para><para> An AWS account has full permission to perform all operations (actions). However, AWS Identity and Access Management (IAM) users don't have any permissions by default. You must grant them explicit permission to perform specific actions. For more information, see <a href="https://docs.aws.amazon.com/amazonglacier/latest/dev/using-iam-with-amazon-glacier.html">Access Control Using AWS Identity and Access Management (IAM)</a>. </para><para> For conceptual information and underlying REST API, see <a href="https://docs.aws.amazon.com/amazonglacier/latest/dev/working-with-archives.html">Working with Archives in Amazon S3 Glacier</a> and <a href="https://docs.aws.amazon.com/amazonglacier/latest/dev/api-multipart-abort-upload.html">Abort Multipart Upload</a> in the <i>Amazon Glacier Developer Guide</i>. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.RemoveGLCMultipartUploadCmdlet.AccountId"> <summary> <para> <para>The <code>AccountId</code> value is the AWS account ID of the account that owns the vault. You can either specify an AWS account ID or optionally a single '<code>-</code>' (hyphen), in which case Amazon S3 Glacier uses the AWS account ID associated with the credentials used to sign the request. If you use an account ID, do not include any hyphens ('-') in the ID.</para> </para> <para>If a value for this parameter is not specified the cmdlet will use a default value of '<b>-</b>'.</para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.RemoveGLCMultipartUploadCmdlet.UploadId"> <summary> <para> <para>The upload ID of the multipart upload to delete.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.RemoveGLCMultipartUploadCmdlet.VaultName"> <summary> <para> <para>The name of the vault.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.RemoveGLCMultipartUploadCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Glacier.Model.AbortMultipartUploadResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.RemoveGLCMultipartUploadCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the UploadId parameter. The -PassThru parameter is deprecated, use -Select '^UploadId' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.RemoveGLCMultipartUploadCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.GLC.RemoveGLCTagsFromVaultCmdlet"> <summary> This operation removes one or more tags from the set of tags attached to a vault. For more information about tags, see <a href="https://docs.aws.amazon.com/amazonglacier/latest/dev/tagging.html">Tagging Amazon S3 Glacier Resources</a>. This operation is idempotent. The operation will be successful, even if there are no tags attached to the vault. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.RemoveGLCTagsFromVaultCmdlet.AccountId"> <summary> <para> <para>The <code>AccountId</code> value is the AWS account ID of the account that owns the vault. You can either specify an AWS account ID or optionally a single '<code>-</code>' (hyphen), in which case Amazon S3 Glacier uses the AWS account ID associated with the credentials used to sign the request. If you use an account ID, do not include any hyphens ('-') in the ID.</para> </para> <para>If a value for this parameter is not specified the cmdlet will use a default value of '<b>-</b>'.</para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.RemoveGLCTagsFromVaultCmdlet.TagKey"> <summary> <para> <para>A list of tag keys. Each corresponding tag is removed from the vault.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.RemoveGLCTagsFromVaultCmdlet.VaultName"> <summary> <para> <para>The name of the vault.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.RemoveGLCTagsFromVaultCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Glacier.Model.RemoveTagsFromVaultResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.RemoveGLCTagsFromVaultCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the VaultName parameter. The -PassThru parameter is deprecated, use -Select '^VaultName' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.RemoveGLCTagsFromVaultCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.GLC.RemoveGLCVaultCmdlet"> <summary> This operation deletes a vault. Amazon S3 Glacier will delete a vault only if there are no archives in the vault as of the last inventory and there have been no writes to the vault since the last inventory. If either of these conditions is not satisfied, the vault deletion fails (that is, the vault is not removed) and Amazon S3 Glacier returns an error. You can use <a>DescribeVault</a> to return the number of archives in a vault, and you can use <a href="https://docs.aws.amazon.com/amazonglacier/latest/dev/api-initiate-job-post.html">Initiate a Job (POST jobs)</a> to initiate a new inventory retrieval for a vault. The inventory contains the archive IDs you use to delete archives using <a href="https://docs.aws.amazon.com/amazonglacier/latest/dev/api-archive-delete.html">Delete Archive (DELETE archive)</a>. <para> This operation is idempotent. </para><para> An AWS account has full permission to perform all operations (actions). However, AWS Identity and Access Management (IAM) users don't have any permissions by default. You must grant them explicit permission to perform specific actions. For more information, see <a href="https://docs.aws.amazon.com/amazonglacier/latest/dev/using-iam-with-amazon-glacier.html">Access Control Using AWS Identity and Access Management (IAM)</a>. </para><para> For conceptual information and underlying REST API, see <a href="https://docs.aws.amazon.com/amazonglacier/latest/dev/deleting-vaults.html">Deleting a Vault in Amazon Glacier</a> and <a href="https://docs.aws.amazon.com/amazonglacier/latest/dev/api-vault-delete.html">Delete Vault </a> in the <i>Amazon S3 Glacier Developer Guide</i>. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.RemoveGLCVaultCmdlet.AccountId"> <summary> <para> <para>The <code>AccountId</code> value is the AWS account ID of the account that owns the vault. You can either specify an AWS account ID or optionally a single '<code>-</code>' (hyphen), in which case Amazon S3 Glacier uses the AWS account ID associated with the credentials used to sign the request. If you use an account ID, do not include any hyphens ('-') in the ID.</para> </para> <para>If a value for this parameter is not specified the cmdlet will use a default value of '<b>-</b>'.</para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.RemoveGLCVaultCmdlet.VaultName"> <summary> <para> <para>The name of the vault.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.RemoveGLCVaultCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Glacier.Model.DeleteVaultResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.RemoveGLCVaultCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the VaultName parameter. The -PassThru parameter is deprecated, use -Select '^VaultName' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.RemoveGLCVaultCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.GLC.RemoveGLCVaultAccessPolicyCmdlet"> <summary> This operation deletes the access policy associated with the specified vault. The operation is eventually consistent; that is, it might take some time for Amazon S3 Glacier to completely remove the access policy, and you might still see the effect of the policy for a short time after you send the delete request. <para> This operation is idempotent. You can invoke delete multiple times, even if there is no policy associated with the vault. For more information about vault access policies, see <a href="https://docs.aws.amazon.com/amazonglacier/latest/dev/vault-access-policy.html">Amazon Glacier Access Control with Vault Access Policies</a>. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.RemoveGLCVaultAccessPolicyCmdlet.AccountId"> <summary> <para> <para>The <code>AccountId</code> value is the AWS account ID of the account that owns the vault. You can either specify an AWS account ID or optionally a single '<code>-</code>' (hyphen), in which case Amazon S3 Glacier uses the AWS account ID associated with the credentials used to sign the request. If you use an account ID, do not include any hyphens ('-') in the ID. </para> </para> <para>If a value for this parameter is not specified the cmdlet will use a default value of '<b>-</b>'.</para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.RemoveGLCVaultAccessPolicyCmdlet.VaultName"> <summary> <para> <para>The name of the vault.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.RemoveGLCVaultAccessPolicyCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Glacier.Model.DeleteVaultAccessPolicyResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.RemoveGLCVaultAccessPolicyCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the VaultName parameter. The -PassThru parameter is deprecated, use -Select '^VaultName' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.RemoveGLCVaultAccessPolicyCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.GLC.RemoveGLCVaultNotificationCmdlet"> <summary> This operation deletes the notification configuration set for a vault. The operation is eventually consistent; that is, it might take some time for Amazon S3 Glacier to completely disable the notifications and you might still receive some notifications for a short time after you send the delete request. <para> An AWS account has full permission to perform all operations (actions). However, AWS Identity and Access Management (IAM) users don't have any permissions by default. You must grant them explicit permission to perform specific actions. For more information, see <a href="https://docs.aws.amazon.com/amazonglacier/latest/dev/using-iam-with-amazon-glacier.html">Access Control Using AWS Identity and Access Management (IAM)</a>. </para><para> For conceptual information and underlying REST API, see <a href="https://docs.aws.amazon.com/amazonglacier/latest/dev/configuring-notifications.html">Configuring Vault Notifications in Amazon S3 Glacier</a> and <a href="https://docs.aws.amazon.com/amazonglacier/latest/dev/api-vault-notifications-delete.html">Delete Vault Notification Configuration </a> in the Amazon S3 Glacier Developer Guide. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.RemoveGLCVaultNotificationCmdlet.AccountId"> <summary> <para> <para>The <code>AccountId</code> value is the AWS account ID of the account that owns the vault. You can either specify an AWS account ID or optionally a single '<code>-</code>' (hyphen), in which case Amazon S3 Glacier uses the AWS account ID associated with the credentials used to sign the request. If you use an account ID, do not include any hyphens ('-') in the ID. </para> </para> <para>If a value for this parameter is not specified the cmdlet will use a default value of '<b>-</b>'.</para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.RemoveGLCVaultNotificationCmdlet.VaultName"> <summary> <para> <para>The name of the vault.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.RemoveGLCVaultNotificationCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Glacier.Model.DeleteVaultNotificationsResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.RemoveGLCVaultNotificationCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the VaultName parameter. The -PassThru parameter is deprecated, use -Select '^VaultName' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.RemoveGLCVaultNotificationCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.GLC.SetGLCDataRetrievalPolicyCmdlet"> <summary> This operation sets and then enacts a data retrieval policy in the region specified in the PUT request. You can set one policy per region for an AWS account. The policy is enacted within a few minutes of a successful PUT operation. <para> The set policy operation does not affect retrieval jobs that were in progress before the policy was enacted. For more information about data retrieval policies, see <a href="https://docs.aws.amazon.com/amazonglacier/latest/dev/data-retrieval-policy.html">Amazon Glacier Data Retrieval Policies</a>. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.SetGLCDataRetrievalPolicyCmdlet.AccountId"> <summary> <para> <para>The <code>AccountId</code> value is the AWS account ID. This value must match the AWS account ID associated with the credentials used to sign the request. You can either specify an AWS account ID or optionally a single '<code>-</code>' (hyphen), in which case Amazon Glacier uses the AWS account ID associated with the credentials used to sign the request. If you specify your account ID, do not include any hyphens ('-') in the ID.</para> </para> <para>If a value for this parameter is not specified the cmdlet will use a default value of '<b>-</b>'.</para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.SetGLCDataRetrievalPolicyCmdlet.Policy"> <summary> <para> <para>The data retrieval policy in JSON format.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.SetGLCDataRetrievalPolicyCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Glacier.Model.SetDataRetrievalPolicyResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.SetGLCDataRetrievalPolicyCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the AccountId parameter. The -PassThru parameter is deprecated, use -Select '^AccountId' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.SetGLCDataRetrievalPolicyCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.GLC.SetGLCVaultAccessPolicyCmdlet"> <summary> This operation configures an access policy for a vault and will overwrite an existing policy. To configure a vault access policy, send a PUT request to the <code>access-policy</code> subresource of the vault. An access policy is specific to a vault and is also called a vault subresource. You can set one access policy per vault and the policy can be up to 20 KB in size. For more information about vault access policies, see <a href="https://docs.aws.amazon.com/amazonglacier/latest/dev/vault-access-policy.html">Amazon Glacier Access Control with Vault Access Policies</a>. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.SetGLCVaultAccessPolicyCmdlet.AccountId"> <summary> <para> <para>The <code>AccountId</code> value is the AWS account ID of the account that owns the vault. You can either specify an AWS account ID or optionally a single '<code>-</code>' (hyphen), in which case Amazon S3 Glacier uses the AWS account ID associated with the credentials used to sign the request. If you use an account ID, do not include any hyphens ('-') in the ID.</para> </para> <para>If a value for this parameter is not specified the cmdlet will use a default value of '<b>-</b>'.</para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.SetGLCVaultAccessPolicyCmdlet.Policy"> <summary> <para> <para>The vault access policy as a JSON string.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.SetGLCVaultAccessPolicyCmdlet.VaultName"> <summary> <para> <para>The name of the vault.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.SetGLCVaultAccessPolicyCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Glacier.Model.SetVaultAccessPolicyResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.SetGLCVaultAccessPolicyCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the VaultName parameter. The -PassThru parameter is deprecated, use -Select '^VaultName' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.SetGLCVaultAccessPolicyCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.GLC.SetGLCVaultNotificationCmdlet"> <summary> This operation configures notifications that will be sent when specific events happen to a vault. By default, you don't get any notifications. <para> To configure vault notifications, send a PUT request to the <code>notification-configuration</code> subresource of the vault. The request should include a JSON document that provides an Amazon SNS topic and specific events for which you want Amazon S3 Glacier to send notifications to the topic. </para><para> Amazon SNS topics must grant permission to the vault to be allowed to publish notifications to the topic. You can configure a vault to publish a notification for the following vault events: </para><ul><li><para><b>ArchiveRetrievalCompleted</b> This event occurs when a job that was initiated for an archive retrieval is completed (<a>InitiateJob</a>). The status of the completed job can be "Succeeded" or "Failed". The notification sent to the SNS topic is the same output as returned from <a>DescribeJob</a>. </para></li><li><para><b>InventoryRetrievalCompleted</b> This event occurs when a job that was initiated for an inventory retrieval is completed (<a>InitiateJob</a>). The status of the completed job can be "Succeeded" or "Failed". The notification sent to the SNS topic is the same output as returned from <a>DescribeJob</a>. </para></li></ul><para> An AWS account has full permission to perform all operations (actions). However, AWS Identity and Access Management (IAM) users don't have any permissions by default. You must grant them explicit permission to perform specific actions. For more information, see <a href="https://docs.aws.amazon.com/amazonglacier/latest/dev/using-iam-with-amazon-glacier.html">Access Control Using AWS Identity and Access Management (IAM)</a>. </para><para> For conceptual information and underlying REST API, see <a href="https://docs.aws.amazon.com/amazonglacier/latest/dev/configuring-notifications.html">Configuring Vault Notifications in Amazon S3 Glacier</a> and <a href="https://docs.aws.amazon.com/amazonglacier/latest/dev/api-vault-notifications-put.html">Set Vault Notification Configuration </a> in the <i>Amazon Glacier Developer Guide</i>. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.SetGLCVaultNotificationCmdlet.AccountId"> <summary> <para> <para>The <code>AccountId</code> value is the AWS account ID of the account that owns the vault. You can either specify an AWS account ID or optionally a single '<code>-</code>' (hyphen), in which case Amazon S3 Glacier uses the AWS account ID associated with the credentials used to sign the request. If you use an account ID, do not include any hyphens ('-') in the ID.</para> </para> <para>If a value for this parameter is not specified the cmdlet will use a default value of '<b>-</b>'.</para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.SetGLCVaultNotificationCmdlet.VaultName"> <summary> <para> <para>The name of the vault.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.SetGLCVaultNotificationCmdlet.VaultNotificationConfig"> <summary> <para> <para>Provides options for specifying notification configuration.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.SetGLCVaultNotificationCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Glacier.Model.SetVaultNotificationsResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.SetGLCVaultNotificationCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the VaultName parameter. The -PassThru parameter is deprecated, use -Select '^VaultName' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.SetGLCVaultNotificationCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.GLC.StartGLCJobCmdlet"> <summary> This operation initiates a job of the specified type, which can be a select, an archival retrieval, or a vault retrieval. For more information about using this operation, see the documentation for the underlying REST API <a href="https://docs.aws.amazon.com/amazonglacier/latest/dev/api-initiate-job-post.html">Initiate a Job</a>. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.StartGLCJobCmdlet.AccountId"> <summary> <para> <para>The <code>AccountId</code> value is the AWS account ID of the account that owns the vault. You can either specify an AWS account ID or optionally a single '<code>-</code>' (hyphen), in which case Amazon S3 Glacier uses the AWS account ID associated with the credentials used to sign the request. If you use an account ID, do not include any hyphens ('-') in the ID.</para> </para> <para>If a value for this parameter is not specified the cmdlet will use a default value of '<b>-</b>'.</para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.StartGLCJobCmdlet.ArchiveId"> <summary> <para> <para>The ID of the archive that you want to retrieve. This field is required only if <code>Type</code> is set to <code>select</code> or <code>archive-retrieval</code>code>. An error occurs if you specify this request parameter for an inventory retrieval job request. </para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.StartGLCJobCmdlet.JobDescription"> <summary> <para> <para>The optional description for the job. The description must be less than or equal to 1,024 bytes. The allowable characters are 7-bit ASCII without control codes-specifically, ASCII values 32-126 decimal or 0x20-0x7E hexadecimal.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.StartGLCJobCmdlet.OutputFormat"> <summary> <para> <para>When initiating a job to retrieve a vault inventory, you can optionally add this parameter to your request to specify the output format. If you are initiating an inventory job and do not specify a Format field, JSON is the default format. Valid values are "CSV" and "JSON".</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.StartGLCJobCmdlet.InventoryRetrieval"> <summary> <para> <para>Input parameters used for range inventory retrieval.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.StartGLCJobCmdlet.OutputLocation"> <summary> <para> <para>Contains information about the location where the select job results are stored.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.StartGLCJobCmdlet.RetrievalByteRange"> <summary> <para> <para>The byte range to retrieve for an archive retrieval. in the form "<i>StartByteValue</i>-<i>EndByteValue</i>" If not specified, the whole archive is retrieved. If specified, the byte range must be megabyte (1024*1024) aligned which means that <i>StartByteValue</i> must be divisible by 1 MB and <i>EndByteValue</i> plus 1 must be divisible by 1 MB or be the end of the archive specified as the archive byte size value minus 1. If RetrievalByteRange is not megabyte aligned, this operation returns a 400 response. </para><para>An error occurs if you specify this field for an inventory retrieval job request.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.StartGLCJobCmdlet.SelectParameter"> <summary> <para> <para>Contains the parameters that define a job.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.StartGLCJobCmdlet.SNSTopic"> <summary> <para> <para>The Amazon SNS topic ARN to which Amazon S3 Glacier sends a notification when the job is completed and the output is ready for you to download. The specified topic publishes the notification to its subscribers. The SNS topic must exist.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.StartGLCJobCmdlet.Tier"> <summary> <para> <para>The tier to use for a select or an archive retrieval job. Valid values are <code>Expedited</code>, <code>Standard</code>, or <code>Bulk</code>. <code>Standard</code> is the default.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.StartGLCJobCmdlet.JobType"> <summary> <para> <para>The job type. You can initiate a job to perform a select query on an archive, retrieve an archive, or get an inventory of a vault. Valid values are "select", "archive-retrieval" and "inventory-retrieval".</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.StartGLCJobCmdlet.VaultName"> <summary> <para> <para>The name of the vault.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.StartGLCJobCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is '*'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Glacier.Model.InitiateJobResponse). Specifying the name of a property of type Amazon.Glacier.Model.InitiateJobResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.StartGLCJobCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the VaultName parameter. The -PassThru parameter is deprecated, use -Select '^VaultName' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.StartGLCJobCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.GLC.StartGLCVaultLockCmdlet"> <summary> This operation initiates the vault locking process by doing the following: <ul><li><para> Installing a vault lock policy on the specified vault. </para></li><li><para> Setting the lock state of vault lock to <code>InProgress</code>. </para></li><li><para> Returning a lock ID, which is used to complete the vault locking process. </para></li></ul><para> You can set one vault lock policy for each vault and this policy can be up to 20 KB in size. For more information about vault lock policies, see <a href="https://docs.aws.amazon.com/amazonglacier/latest/dev/vault-lock-policy.html">Amazon Glacier Access Control with Vault Lock Policies</a>. </para><para> You must complete the vault locking process within 24 hours after the vault lock enters the <code>InProgress</code> state. After the 24 hour window ends, the lock ID expires, the vault automatically exits the <code>InProgress</code> state, and the vault lock policy is removed from the vault. You call <a>CompleteVaultLock</a> to complete the vault locking process by setting the state of the vault lock to <code>Locked</code>. </para><para> After a vault lock is in the <code>Locked</code> state, you cannot initiate a new vault lock for the vault. </para><para> You can abort the vault locking process by calling <a>AbortVaultLock</a>. You can get the state of the vault lock by calling <a>GetVaultLock</a>. For more information about the vault locking process, <a href="https://docs.aws.amazon.com/amazonglacier/latest/dev/vault-lock.html">Amazon Glacier Vault Lock</a>. </para><para> If this operation is called when the vault lock is in the <code>InProgress</code> state, the operation returns an <code>AccessDeniedException</code> error. When the vault lock is in the <code>InProgress</code> state you must call <a>AbortVaultLock</a> before you can initiate a new vault lock policy. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.StartGLCVaultLockCmdlet.AccountId"> <summary> <para> <para>The <code>AccountId</code> value is the AWS account ID. This value must match the AWS account ID associated with the credentials used to sign the request. You can either specify an AWS account ID or optionally a single '<code>-</code>' (hyphen), in which case Amazon Glacier uses the AWS account ID associated with the credentials used to sign the request. If you specify your account ID, do not include any hyphens ('-') in the ID.</para> </para> <para>If a value for this parameter is not specified the cmdlet will use a default value of '<b>-</b>'.</para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.StartGLCVaultLockCmdlet.Policy"> <summary> <para> <para>The vault lock policy as a JSON string, which uses "\" as an escape character.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.StartGLCVaultLockCmdlet.VaultName"> <summary> <para> <para>The name of the vault.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.StartGLCVaultLockCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'LockId'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Glacier.Model.InitiateVaultLockResponse). Specifying the name of a property of type Amazon.Glacier.Model.InitiateVaultLockResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.StartGLCVaultLockCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the VaultName parameter. The -PassThru parameter is deprecated, use -Select '^VaultName' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.StartGLCVaultLockCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.GLC.StopGLCVaultLockCmdlet"> <summary> This operation aborts the vault locking process if the vault lock is not in the <code>Locked</code> state. If the vault lock is in the <code>Locked</code> state when this operation is requested, the operation returns an <code>AccessDeniedException</code> error. Aborting the vault locking process removes the vault lock policy from the specified vault. <para> A vault lock is put into the <code>InProgress</code> state by calling <a>InitiateVaultLock</a>. A vault lock is put into the <code>Locked</code> state by calling <a>CompleteVaultLock</a>. You can get the state of a vault lock by calling <a>GetVaultLock</a>. For more information about the vault locking process, see <a href="https://docs.aws.amazon.com/amazonglacier/latest/dev/vault-lock.html">Amazon Glacier Vault Lock</a>. For more information about vault lock policies, see <a href="https://docs.aws.amazon.com/amazonglacier/latest/dev/vault-lock-policy.html">Amazon Glacier Access Control with Vault Lock Policies</a>. </para><para> This operation is idempotent. You can successfully invoke this operation multiple times, if the vault lock is in the <code>InProgress</code> state or if there is no policy associated with the vault. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.StopGLCVaultLockCmdlet.AccountId"> <summary> <para> <para>The <code>AccountId</code> value is the AWS account ID. This value must match the AWS account ID associated with the credentials used to sign the request. You can either specify an AWS account ID or optionally a single '<code>-</code>' (hyphen), in which case Amazon Glacier uses the AWS account ID associated with the credentials used to sign the request. If you specify your account ID, do not include any hyphens ('-') in the ID.</para> </para> <para>If a value for this parameter is not specified the cmdlet will use a default value of '<b>-</b>'.</para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.StopGLCVaultLockCmdlet.VaultName"> <summary> <para> <para>The name of the vault.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.StopGLCVaultLockCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Glacier.Model.AbortVaultLockResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.StopGLCVaultLockCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the VaultName parameter. The -PassThru parameter is deprecated, use -Select '^VaultName' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.GLC.StopGLCVaultLockCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> </members> </doc> |