AWS.Tools.ElasticMapReduce.XML
|
<?xml version="1.0"?>
<doc> <assembly> <name>AWS.Tools.ElasticMapReduce</name> </assembly> <members> <member name="T:Amazon.PowerShell.Cmdlets.EMR.AddEMRInstanceFleetCmdlet"> <summary> Adds an instance fleet to a running cluster. <note><para> The instance fleet configuration is available only in Amazon EMR releases 4.8.0 and later, excluding 5.0.x. </para></note> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.AddEMRInstanceFleetCmdlet.OnDemandSpecification_AllocationStrategy"> <summary> <para> <para>Specifies the strategy to use in launching On-Demand instance fleets. Available options are <c>lowest-price</c> and <c>prioritized</c>. <c>lowest-price</c> specifies to launch the instances with the lowest price first, and <c>prioritized</c> specifies that Amazon EMR should launch the instances with the highest priority first. The default is <c>lowest-price</c>.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.AddEMRInstanceFleetCmdlet.SpotSpecification_AllocationStrategy"> <summary> <para> <para>Specifies one of the following strategies to launch Spot Instance fleets: <c>capacity-optimized</c>, <c>price-capacity-optimized</c>, <c>lowest-price</c>, or <c>diversified</c>, and <c>capacity-optimized-prioritized</c>. For more information on the provisioning strategies, see <a href="https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ec2-fleet-allocation-strategy.html">Allocation strategies for Spot Instances</a> in the <i>Amazon EC2 User Guide for Linux Instances</i>.</para><note><para>When you launch a Spot Instance fleet with the old console, it automatically launches with the <c>capacity-optimized</c> strategy. You can't change the allocation strategy from the old console.</para></note> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.AddEMRInstanceFleetCmdlet.OnDemandResizeSpecification_AllocationStrategy"> <summary> <para> <para>Specifies the allocation strategy to use to launch On-Demand instances during a resize. The default is <c>lowest-price</c>.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.AddEMRInstanceFleetCmdlet.SpotResizeSpecification_AllocationStrategy"> <summary> <para> <para>Specifies the allocation strategy to use to launch Spot instances during a resize. If you run Amazon EMR releases 6.9.0 or higher, the default is <c>price-capacity-optimized</c>. If you run Amazon EMR releases 6.8.0 or lower, the default is <c>capacity-optimized</c>.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.AddEMRInstanceFleetCmdlet.SpotSpecification_BlockDurationMinute"> <summary> <para> <para>The defined duration for Spot Instances (also known as Spot blocks) in minutes. When specified, the Spot Instance does not terminate before the defined duration expires, and defined duration pricing for Spot Instances applies. Valid values are 60, 120, 180, 240, 300, or 360. The duration period starts as soon as a Spot Instance receives its instance ID. At the end of the duration, Amazon EC2 marks the Spot Instance for termination and provides a Spot Instance termination notice, which gives the instance a two-minute warning before it terminates. </para><note><para>Spot Instances with a defined duration (also known as Spot blocks) are no longer available to new customers from July 1, 2021. For customers who have previously used the feature, we will continue to support Spot Instances with a defined duration until December 31, 2022. </para></note> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.AddEMRInstanceFleetCmdlet.CapacityReservationOptions_CapacityReservationPreference"> <summary> <para> <para>Indicates the instance's Capacity Reservation preferences. Possible preferences include:</para><ul><li><para><c>open</c> - The instance can run in any open Capacity Reservation that has matching attributes (instance type, platform, Availability Zone).</para></li><li><para><c>none</c> - The instance avoids running in a Capacity Reservation even if one is available. The instance runs as an On-Demand Instance.</para></li></ul> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.AddEMRInstanceFleetCmdlet.InstanceFleet_ResizeSpecifications_OnDemandResizeSpecification_CapacityReservationOptions_CapacityReservationPreference"> <summary> <para> <para>Indicates the instance's Capacity Reservation preferences. Possible preferences include:</para><ul><li><para><c>open</c> - The instance can run in any open Capacity Reservation that has matching attributes (instance type, platform, Availability Zone).</para></li><li><para><c>none</c> - The instance avoids running in a Capacity Reservation even if one is available. The instance runs as an On-Demand Instance.</para></li></ul> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.AddEMRInstanceFleetCmdlet.CapacityReservationOptions_CapacityReservationResourceGroupArn"> <summary> <para> <para>The ARN of the Capacity Reservation resource group in which to run the instance.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.AddEMRInstanceFleetCmdlet.InstanceFleet_ResizeSpecifications_OnDemandResizeSpecification_CapacityReservationOptions_CapacityReservationResourceGroupArn"> <summary> <para> <para>The ARN of the Capacity Reservation resource group in which to run the instance.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.AddEMRInstanceFleetCmdlet.ClusterId"> <summary> <para> <para>The unique identifier of the cluster.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.AddEMRInstanceFleetCmdlet.InstanceFleet_Context"> <summary> <para> <para>Reserved.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.AddEMRInstanceFleetCmdlet.InstanceFleet_InstanceFleetType"> <summary> <para> <para>The node type that the instance fleet hosts. Valid values are MASTER, CORE, and TASK.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.AddEMRInstanceFleetCmdlet.InstanceFleet_InstanceTypeConfig"> <summary> <para> <para>The instance type configurations that define the Amazon EC2 instances in the instance fleet.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.AddEMRInstanceFleetCmdlet.InstanceFleet_Name"> <summary> <para> <para>The friendly name of the instance fleet.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.AddEMRInstanceFleetCmdlet.InstanceFleet_TargetOnDemandCapacity"> <summary> <para> <para>The target capacity of On-Demand units for the instance fleet, which determines how many On-Demand Instances to provision. When the instance fleet launches, Amazon EMR tries to provision On-Demand Instances as specified by <a>InstanceTypeConfig</a>. Each instance configuration has a specified <c>WeightedCapacity</c>. When an On-Demand Instance is provisioned, the <c>WeightedCapacity</c> units count toward the target capacity. Amazon EMR provisions instances until the target capacity is totally fulfilled, even if this results in an overage. For example, if there are 2 units remaining to fulfill capacity, and Amazon EMR can only provision an instance with a <c>WeightedCapacity</c> of 5 units, the instance is provisioned, and the target capacity is exceeded by 3 units.</para><note><para>If not specified or set to 0, only Spot Instances are provisioned for the instance fleet using <c>TargetSpotCapacity</c>. At least one of <c>TargetSpotCapacity</c> and <c>TargetOnDemandCapacity</c> should be greater than 0. For a master instance fleet, only one of <c>TargetSpotCapacity</c> and <c>TargetOnDemandCapacity</c> can be specified, and its value must be 1.</para></note> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.AddEMRInstanceFleetCmdlet.InstanceFleet_TargetSpotCapacity"> <summary> <para> <para>The target capacity of Spot units for the instance fleet, which determines how many Spot Instances to provision. When the instance fleet launches, Amazon EMR tries to provision Spot Instances as specified by <a>InstanceTypeConfig</a>. Each instance configuration has a specified <c>WeightedCapacity</c>. When a Spot Instance is provisioned, the <c>WeightedCapacity</c> units count toward the target capacity. Amazon EMR provisions instances until the target capacity is totally fulfilled, even if this results in an overage. For example, if there are 2 units remaining to fulfill capacity, and Amazon EMR can only provision an instance with a <c>WeightedCapacity</c> of 5 units, the instance is provisioned, and the target capacity is exceeded by 3 units.</para><note><para>If not specified or set to 0, only On-Demand Instances are provisioned for the instance fleet. At least one of <c>TargetSpotCapacity</c> and <c>TargetOnDemandCapacity</c> should be greater than 0. For a master instance fleet, only one of <c>TargetSpotCapacity</c> and <c>TargetOnDemandCapacity</c> can be specified, and its value must be 1.</para></note> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.AddEMRInstanceFleetCmdlet.SpotSpecification_TimeoutAction"> <summary> <para> <para>The action to take when <c>TargetSpotCapacity</c> has not been fulfilled when the <c>TimeoutDurationMinutes</c> has expired; that is, when all Spot Instances could not be provisioned within the Spot provisioning timeout. Valid values are <c>TERMINATE_CLUSTER</c> and <c>SWITCH_TO_ON_DEMAND</c>. SWITCH_TO_ON_DEMAND specifies that if no Spot Instances are available, On-Demand Instances should be provisioned to fulfill any remaining Spot capacity.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.AddEMRInstanceFleetCmdlet.SpotSpecification_TimeoutDurationMinute"> <summary> <para> <para>The Spot provisioning timeout period in minutes. If Spot Instances are not provisioned within this time period, the <c>TimeOutAction</c> is taken. Minimum value is 5 and maximum value is 1440. The timeout applies only during initial provisioning, when the cluster is first created.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.AddEMRInstanceFleetCmdlet.OnDemandResizeSpecification_TimeoutDurationMinute"> <summary> <para> <para>On-Demand resize timeout in minutes. If On-Demand Instances are not provisioned within this time, the resize workflow stops. The minimum value is 5 minutes, and the maximum value is 10,080 minutes (7 days). The timeout applies to all resize workflows on the Instance Fleet. The resize could be triggered by Amazon EMR Managed Scaling or by the customer (via Amazon EMR Console, Amazon EMR CLI modify-instance-fleet or Amazon EMR SDK ModifyInstanceFleet API) or by Amazon EMR due to Amazon EC2 Spot Reclamation.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.AddEMRInstanceFleetCmdlet.SpotResizeSpecification_TimeoutDurationMinute"> <summary> <para> <para>Spot resize timeout in minutes. If Spot Instances are not provisioned within this time, the resize workflow will stop provisioning of Spot instances. Minimum value is 5 minutes and maximum value is 10,080 minutes (7 days). The timeout applies to all resize workflows on the Instance Fleet. The resize could be triggered by Amazon EMR Managed Scaling or by the customer (via Amazon EMR Console, Amazon EMR CLI modify-instance-fleet or Amazon EMR SDK ModifyInstanceFleet API) or by Amazon EMR due to Amazon EC2 Spot Reclamation.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.AddEMRInstanceFleetCmdlet.CapacityReservationOptions_UsageStrategy"> <summary> <para> <para>Indicates whether to use unused Capacity Reservations for fulfilling On-Demand capacity.</para><para>If you specify <c>use-capacity-reservations-first</c>, the fleet uses unused Capacity Reservations to fulfill On-Demand capacity up to the target On-Demand capacity. If multiple instance pools have unused Capacity Reservations, the On-Demand allocation strategy (<c>lowest-price</c>) is applied. If the number of unused Capacity Reservations is less than the On-Demand target capacity, the remaining On-Demand target capacity is launched according to the On-Demand allocation strategy (<c>lowest-price</c>).</para><para>If you do not specify a value, the fleet fulfills the On-Demand capacity according to the chosen On-Demand allocation strategy.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.AddEMRInstanceFleetCmdlet.InstanceFleet_ResizeSpecifications_OnDemandResizeSpecification_CapacityReservationOptions_UsageStrategy"> <summary> <para> <para>Indicates whether to use unused Capacity Reservations for fulfilling On-Demand capacity.</para><para>If you specify <c>use-capacity-reservations-first</c>, the fleet uses unused Capacity Reservations to fulfill On-Demand capacity up to the target On-Demand capacity. If multiple instance pools have unused Capacity Reservations, the On-Demand allocation strategy (<c>lowest-price</c>) is applied. If the number of unused Capacity Reservations is less than the On-Demand target capacity, the remaining On-Demand target capacity is launched according to the On-Demand allocation strategy (<c>lowest-price</c>).</para><para>If you do not specify a value, the fleet fulfills the On-Demand capacity according to the chosen On-Demand allocation strategy.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.AddEMRInstanceFleetCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is '*'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.AddInstanceFleetResponse). Specifying the name of a property of type Amazon.ElasticMapReduce.Model.AddInstanceFleetResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.AddEMRInstanceFleetCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the ClusterId parameter. The -PassThru parameter is deprecated, use -Select '^ClusterId' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.AddEMRInstanceFleetCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.EMR.AddEMRInstanceGroupCmdlet"> <summary> Adds one or more instance groups to a running cluster. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.AddEMRInstanceGroupCmdlet.InstanceGroup"> <summary> <para> <para>Instance groups to add.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.AddEMRInstanceGroupCmdlet.JobFlowId"> <summary> <para> <para>Job flow in which to add the instance groups.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.AddEMRInstanceGroupCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is '*'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.AddInstanceGroupsResponse). Specifying the name of a property of type Amazon.ElasticMapReduce.Model.AddInstanceGroupsResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.AddEMRInstanceGroupCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the JobFlowId parameter. The -PassThru parameter is deprecated, use -Select '^JobFlowId' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.AddEMRInstanceGroupCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.EMR.AddEMRJobFlowStepCmdlet"> <summary> AddJobFlowSteps adds new steps to a running cluster. A maximum of 256 steps are allowed in each job flow. <para> If your cluster is long-running (such as a Hive data warehouse) or complex, you may require more than 256 steps to process your data. You can bypass the 256-step limitation in various ways, including using SSH to connect to the master node and submitting queries directly to the software running on the master node, such as Hive and Hadoop. </para><para> A step specifies the location of a JAR file stored either on the master node of the cluster or in Amazon S3. Each step is performed by the main function of the main class of the JAR file. The main class can be specified either in the manifest of the JAR or by using the MainFunction parameter of the step. </para><para> Amazon EMR executes each step in the order listed. For a step to be considered complete, the main function must exit with a zero exit code and all Hadoop jobs started while the step was running must have completed and run successfully. </para><para> You can only add steps to a cluster that is in one of the following states: STARTING, BOOTSTRAPPING, RUNNING, or WAITING. </para><note><para> The string values passed into <c>HadoopJarStep</c> object cannot exceed a total of 10240 characters. </para></note> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.AddEMRJobFlowStepCmdlet.ExecutionRoleArn"> <summary> <para> <para>The Amazon Resource Name (ARN) of the runtime role for a step on the cluster. The runtime role can be a cross-account IAM role. The runtime role ARN is a combination of account ID, role name, and role type using the following format: <c>arn:partition:service:region:account:resource</c>. </para><para>For example, <c>arn:aws:IAM::1234567890:role/ReadOnly</c> is a correctly formatted runtime role ARN.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.AddEMRJobFlowStepCmdlet.JobFlowId"> <summary> <para> <para>A string that uniquely identifies the job flow. This identifier is returned by <a>RunJobFlow</a> and can also be obtained from <a>ListClusters</a>. </para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.AddEMRJobFlowStepCmdlet.Step"> <summary> <para> <para> A list of <a>StepConfig</a> to be executed by the job flow. </para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.AddEMRJobFlowStepCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'StepIds'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.AddJobFlowStepsResponse). Specifying the name of a property of type Amazon.ElasticMapReduce.Model.AddJobFlowStepsResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.AddEMRJobFlowStepCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the JobFlowId parameter. The -PassThru parameter is deprecated, use -Select '^JobFlowId' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.AddEMRJobFlowStepCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.EMR.AddEMRResourceTagCmdlet"> <summary> Adds tags to an Amazon EMR resource, such as a cluster or an Amazon EMR Studio. Tags make it easier to associate resources in various ways, such as grouping clusters to track your Amazon EMR resource allocation costs. For more information, see <a href="https://docs.aws.amazon.com/emr/latest/ManagementGuide/emr-plan-tags.html">Tag Clusters</a>. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.AddEMRResourceTagCmdlet.ResourceId"> <summary> <para> <para>The Amazon EMR resource identifier to which tags will be added. For example, a cluster identifier or an Amazon EMR Studio ID.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.AddEMRResourceTagCmdlet.Tag"> <summary> <para> <para>A list of tags to associate with a resource. Tags are user-defined key-value pairs that consist of a required key string with a maximum of 128 characters, and an optional value string with a maximum of 256 characters.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.AddEMRResourceTagCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.AddTagsResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.AddEMRResourceTagCmdlet.PassThru"> <summary> Returns the collection of Tag objects that were added The -PassThru parameter is deprecated, use -Select instead. This parameter will be removed in future </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.AddEMRResourceTagCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.EMR.EditEMRClusterCmdlet"> <summary> Modifies the number of steps that can be executed concurrently for the cluster specified using ClusterID. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.EditEMRClusterCmdlet.ClusterId"> <summary> <para> <para>The unique identifier of the cluster.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.EditEMRClusterCmdlet.StepConcurrencyLevel"> <summary> <para> <para>The number of steps that can be executed concurrently. You can specify a minimum of 1 step and a maximum of 256 steps. We recommend that you do not change this parameter while steps are running or the <c>ActionOnFailure</c> setting may not behave as expected. For more information see <a>Step$ActionOnFailure</a>.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.EditEMRClusterCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'StepConcurrencyLevel'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.ModifyClusterResponse). Specifying the name of a property of type Amazon.ElasticMapReduce.Model.ModifyClusterResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.EditEMRClusterCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the ClusterId parameter. The -PassThru parameter is deprecated, use -Select '^ClusterId' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.EditEMRClusterCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.EMR.EditEMRInstanceFleetCmdlet"> <summary> Modifies the target On-Demand and target Spot capacities for the instance fleet with the specified InstanceFleetID within the cluster specified using ClusterID. The call either succeeds or fails atomically. <note><para> The instance fleet configuration is available only in Amazon EMR releases 4.8.0 and later, excluding 5.0.x versions. </para></note> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.EditEMRInstanceFleetCmdlet.OnDemandResizeSpecification_AllocationStrategy"> <summary> <para> <para>Specifies the allocation strategy to use to launch On-Demand instances during a resize. The default is <c>lowest-price</c>.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.EditEMRInstanceFleetCmdlet.SpotResizeSpecification_AllocationStrategy"> <summary> <para> <para>Specifies the allocation strategy to use to launch Spot instances during a resize. If you run Amazon EMR releases 6.9.0 or higher, the default is <c>price-capacity-optimized</c>. If you run Amazon EMR releases 6.8.0 or lower, the default is <c>capacity-optimized</c>.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.EditEMRInstanceFleetCmdlet.CapacityReservationOptions_CapacityReservationPreference"> <summary> <para> <para>Indicates the instance's Capacity Reservation preferences. Possible preferences include:</para><ul><li><para><c>open</c> - The instance can run in any open Capacity Reservation that has matching attributes (instance type, platform, Availability Zone).</para></li><li><para><c>none</c> - The instance avoids running in a Capacity Reservation even if one is available. The instance runs as an On-Demand Instance.</para></li></ul> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.EditEMRInstanceFleetCmdlet.CapacityReservationOptions_CapacityReservationResourceGroupArn"> <summary> <para> <para>The ARN of the Capacity Reservation resource group in which to run the instance.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.EditEMRInstanceFleetCmdlet.ClusterId"> <summary> <para> <para>The unique identifier of the cluster.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.EditEMRInstanceFleetCmdlet.InstanceFleet_Context"> <summary> <para> <para>Reserved.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.EditEMRInstanceFleetCmdlet.InstanceFleet_InstanceFleetId"> <summary> <para> <para>A unique identifier for the instance fleet.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.EditEMRInstanceFleetCmdlet.InstanceFleet_InstanceTypeConfig"> <summary> <para> <para>An array of InstanceTypeConfig objects that specify how Amazon EMR provisions Amazon EC2 instances when it fulfills On-Demand and Spot capacities. For more information, see <a href="https://docs.aws.amazon.com/emr/latest/APIReference/API_InstanceTypeConfig.html">InstanceTypeConfig</a>.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.EditEMRInstanceFleetCmdlet.InstanceFleet_TargetOnDemandCapacity"> <summary> <para> <para>The target capacity of On-Demand units for the instance fleet. For more information see <a>InstanceFleetConfig$TargetOnDemandCapacity</a>.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.EditEMRInstanceFleetCmdlet.InstanceFleet_TargetSpotCapacity"> <summary> <para> <para>The target capacity of Spot units for the instance fleet. For more information, see <a>InstanceFleetConfig$TargetSpotCapacity</a>.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.EditEMRInstanceFleetCmdlet.OnDemandResizeSpecification_TimeoutDurationMinute"> <summary> <para> <para>On-Demand resize timeout in minutes. If On-Demand Instances are not provisioned within this time, the resize workflow stops. The minimum value is 5 minutes, and the maximum value is 10,080 minutes (7 days). The timeout applies to all resize workflows on the Instance Fleet. The resize could be triggered by Amazon EMR Managed Scaling or by the customer (via Amazon EMR Console, Amazon EMR CLI modify-instance-fleet or Amazon EMR SDK ModifyInstanceFleet API) or by Amazon EMR due to Amazon EC2 Spot Reclamation.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.EditEMRInstanceFleetCmdlet.SpotResizeSpecification_TimeoutDurationMinute"> <summary> <para> <para>Spot resize timeout in minutes. If Spot Instances are not provisioned within this time, the resize workflow will stop provisioning of Spot instances. Minimum value is 5 minutes and maximum value is 10,080 minutes (7 days). The timeout applies to all resize workflows on the Instance Fleet. The resize could be triggered by Amazon EMR Managed Scaling or by the customer (via Amazon EMR Console, Amazon EMR CLI modify-instance-fleet or Amazon EMR SDK ModifyInstanceFleet API) or by Amazon EMR due to Amazon EC2 Spot Reclamation.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.EditEMRInstanceFleetCmdlet.CapacityReservationOptions_UsageStrategy"> <summary> <para> <para>Indicates whether to use unused Capacity Reservations for fulfilling On-Demand capacity.</para><para>If you specify <c>use-capacity-reservations-first</c>, the fleet uses unused Capacity Reservations to fulfill On-Demand capacity up to the target On-Demand capacity. If multiple instance pools have unused Capacity Reservations, the On-Demand allocation strategy (<c>lowest-price</c>) is applied. If the number of unused Capacity Reservations is less than the On-Demand target capacity, the remaining On-Demand target capacity is launched according to the On-Demand allocation strategy (<c>lowest-price</c>).</para><para>If you do not specify a value, the fleet fulfills the On-Demand capacity according to the chosen On-Demand allocation strategy.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.EditEMRInstanceFleetCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.ModifyInstanceFleetResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.EditEMRInstanceFleetCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the ClusterId parameter. The -PassThru parameter is deprecated, use -Select '^ClusterId' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.EditEMRInstanceFleetCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.EMR.EditEMRInstanceGroupCmdlet"> <summary> ModifyInstanceGroups modifies the number of nodes and configuration settings of an instance group. The input parameters include the new target instance count for the group and the instance group ID. The call will either succeed or fail atomically. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.EditEMRInstanceGroupCmdlet.ClusterId"> <summary> <para> <para>The ID of the cluster to which the instance group belongs.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.EditEMRInstanceGroupCmdlet.InstanceGroup"> <summary> <para> <para>Instance groups to change.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.EditEMRInstanceGroupCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.ModifyInstanceGroupsResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.EditEMRInstanceGroupCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the ClusterId parameter. The -PassThru parameter is deprecated, use -Select '^ClusterId' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.EditEMRInstanceGroupCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.EMR.FindEMRReleaseLabelCmdlet"> <summary> Retrieves release labels of Amazon EMR services in the Region where the API is called. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.FindEMRReleaseLabelCmdlet.Filters_Application"> <summary> <para> <para>Optional release label application filter. For example, <c>spark@2.1.0</c>.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.FindEMRReleaseLabelCmdlet.Filters_Prefix"> <summary> <para> <para>Optional release label version prefix filter. For example, <c>emr-5</c>.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.FindEMRReleaseLabelCmdlet.MaxResult"> <summary> <para> <para>Defines the maximum number of release labels to return in a single response. The default is <c>100</c>.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.FindEMRReleaseLabelCmdlet.NextToken"> <summary> <para> <para>Specifies the next page of results. If <c>NextToken</c> is not specified, which is usually the case for the first request of ListReleaseLabels, the first page of results are determined by other filtering parameters or by the latest version. The <c>ListReleaseLabels</c> request fails if the identity (Amazon Web Services account ID) and all filtering parameters are different from the original request, or if the <c>NextToken</c> is expired or tampered with.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.FindEMRReleaseLabelCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'ReleaseLabels'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.ListReleaseLabelsResponse). Specifying the name of a property of type Amazon.ElasticMapReduce.Model.ListReleaseLabelsResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.EMR.GetEMRAutoTerminationPolicyCmdlet"> <summary> Returns the auto-termination policy for an Amazon EMR cluster. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRAutoTerminationPolicyCmdlet.ClusterId"> <summary> <para> <para>Specifies the ID of the Amazon EMR cluster for which the auto-termination policy will be fetched.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRAutoTerminationPolicyCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'AutoTerminationPolicy'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.GetAutoTerminationPolicyResponse). Specifying the name of a property of type Amazon.ElasticMapReduce.Model.GetAutoTerminationPolicyResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRAutoTerminationPolicyCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the ClusterId parameter. The -PassThru parameter is deprecated, use -Select '^ClusterId' instead. This parameter will be removed in a future version. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.EMR.GetEMRBlockPublicAccessConfigurationCmdlet"> <summary> Returns the Amazon EMR block public access configuration for your Amazon Web Services account in the current Region. For more information see <a href="https://docs.aws.amazon.com/emr/latest/ManagementGuide/configure-block-public-access.html">Configure Block Public Access for Amazon EMR</a> in the <i>Amazon EMR Management Guide</i>. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRBlockPublicAccessConfigurationCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is '*'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.GetBlockPublicAccessConfigurationResponse). Specifying the name of a property of type Amazon.ElasticMapReduce.Model.GetBlockPublicAccessConfigurationResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.EMR.GetEMRBootstrapActionListCmdlet"> <summary> Provides information about the bootstrap actions associated with a cluster.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRBootstrapActionListCmdlet.ClusterId"> <summary> <para> <para>The cluster identifier for the bootstrap actions to list.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRBootstrapActionListCmdlet.Marker"> <summary> <para> <para>The pagination token that indicates the next set of results to retrieve.</para> </para> <para> <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call. <br/>'Marker' is only returned by the cmdlet when '-Select *' is specified. In order to manually control output pagination, set '-Marker' to null for the first call then set the 'Marker' using the same property output from the previous call for subsequent calls. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRBootstrapActionListCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'BootstrapActions'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.ListBootstrapActionsResponse). Specifying the name of a property of type Amazon.ElasticMapReduce.Model.ListBootstrapActionsResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRBootstrapActionListCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the ClusterId parameter. The -PassThru parameter is deprecated, use -Select '^ClusterId' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRBootstrapActionListCmdlet.NoAutoIteration"> <summary> By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of Marker as the start point. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.EMR.GetEMRClusterCmdlet"> <summary> Provides cluster-level details including status, hardware and software configuration, VPC settings, and so on. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRClusterCmdlet.ClusterId"> <summary> <para> <para>The identifier of the cluster to describe.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRClusterCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'Cluster'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.DescribeClusterResponse). Specifying the name of a property of type Amazon.ElasticMapReduce.Model.DescribeClusterResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRClusterCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the ClusterId parameter. The -PassThru parameter is deprecated, use -Select '^ClusterId' instead. This parameter will be removed in a future version. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.EMR.GetEMRClusterListCmdlet"> <summary> Provides the status of all clusters visible to this Amazon Web Services account. Allows you to filter the list of clusters based on certain criteria; for example, filtering by cluster creation date and time or by status. This call returns a maximum of 50 clusters in unsorted order per call, but returns a marker to track the paging of the cluster list across multiple ListClusters calls.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRClusterListCmdlet.ClusterState"> <summary> <para> <para>The cluster state filters to apply when listing clusters. Clusters that change state while this action runs may be not be returned as expected in the list of clusters.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRClusterListCmdlet.CreatedAfter"> <summary> <para> <para>The creation date and time beginning value filter for listing clusters.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRClusterListCmdlet.CreatedBefore"> <summary> <para> <para>The creation date and time end value filter for listing clusters.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRClusterListCmdlet.Marker"> <summary> <para> <para>The pagination token that indicates the next set of results to retrieve.</para> </para> <para> <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call. <br/>'Marker' is only returned by the cmdlet when '-Select *' is specified. In order to manually control output pagination, set '-Marker' to null for the first call then set the 'Marker' using the same property output from the previous call for subsequent calls. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRClusterListCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'Clusters'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.ListClustersResponse). Specifying the name of a property of type Amazon.ElasticMapReduce.Model.ListClustersResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRClusterListCmdlet.NoAutoIteration"> <summary> By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of Marker as the start point. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.EMR.GetEMRClusterSessionCredentialCmdlet"> <summary> Provides temporary, HTTP basic credentials that are associated with a given runtime IAM role and used by a cluster with fine-grained access control activated. You can use these credentials to connect to cluster endpoints that support username and password authentication. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRClusterSessionCredentialCmdlet.ClusterId"> <summary> <para> <para>The unique identifier of the cluster.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRClusterSessionCredentialCmdlet.ExecutionRoleArn"> <summary> <para> <para>The Amazon Resource Name (ARN) of the runtime role for interactive workload submission on the cluster. The runtime role can be a cross-account IAM role. The runtime role ARN is a combination of account ID, role name, and role type using the following format: <c>arn:partition:service:region:account:resource</c>.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRClusterSessionCredentialCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is '*'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.GetClusterSessionCredentialsResponse). Specifying the name of a property of type Amazon.ElasticMapReduce.Model.GetClusterSessionCredentialsResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRClusterSessionCredentialCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the ClusterId parameter. The -PassThru parameter is deprecated, use -Select '^ClusterId' instead. This parameter will be removed in a future version. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.EMR.GetEMRInstanceFleetListCmdlet"> <summary> Lists all available details about the instance fleets in a cluster. <note><para> The instance fleet configuration is available only in Amazon EMR releases 4.8.0 and later, excluding 5.0.x versions. </para></note><br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRInstanceFleetListCmdlet.ClusterId"> <summary> <para> <para>The unique identifier of the cluster.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRInstanceFleetListCmdlet.Marker"> <summary> <para> <para>The pagination token that indicates the next set of results to retrieve.</para> </para> <para> <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call. <br/>'Marker' is only returned by the cmdlet when '-Select *' is specified. In order to manually control output pagination, set '-Marker' to null for the first call then set the 'Marker' using the same property output from the previous call for subsequent calls. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRInstanceFleetListCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'InstanceFleets'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.ListInstanceFleetsResponse). Specifying the name of a property of type Amazon.ElasticMapReduce.Model.ListInstanceFleetsResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRInstanceFleetListCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the ClusterId parameter. The -PassThru parameter is deprecated, use -Select '^ClusterId' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRInstanceFleetListCmdlet.NoAutoIteration"> <summary> By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of Marker as the start point. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.EMR.GetEMRInstanceGroupListCmdlet"> <summary> Provides all available details about the instance groups in a cluster.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRInstanceGroupListCmdlet.ClusterId"> <summary> <para> <para>The identifier of the cluster for which to list the instance groups.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRInstanceGroupListCmdlet.Marker"> <summary> <para> <para>The pagination token that indicates the next set of results to retrieve.</para> </para> <para> <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call. <br/>'Marker' is only returned by the cmdlet when '-Select *' is specified. In order to manually control output pagination, set '-Marker' to null for the first call then set the 'Marker' using the same property output from the previous call for subsequent calls. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRInstanceGroupListCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'InstanceGroups'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.ListInstanceGroupsResponse). Specifying the name of a property of type Amazon.ElasticMapReduce.Model.ListInstanceGroupsResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRInstanceGroupListCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the ClusterId parameter. The -PassThru parameter is deprecated, use -Select '^ClusterId' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRInstanceGroupListCmdlet.NoAutoIteration"> <summary> By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of Marker as the start point. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.EMR.GetEMRInstanceListCmdlet"> <summary> Provides information for all active Amazon EC2 instances and Amazon EC2 instances terminated in the last 30 days, up to a maximum of 2,000. Amazon EC2 instances in any of the following states are considered active: AWAITING_FULFILLMENT, PROVISIONING, BOOTSTRAPPING, RUNNING.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRInstanceListCmdlet.ClusterId"> <summary> <para> <para>The identifier of the cluster for which to list the instances.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRInstanceListCmdlet.InstanceFleetId"> <summary> <para> <para>The unique identifier of the instance fleet.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRInstanceListCmdlet.InstanceFleetType"> <summary> <para> <para>The node type of the instance fleet. For example MASTER, CORE, or TASK.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRInstanceListCmdlet.InstanceGroupId"> <summary> <para> <para>The identifier of the instance group for which to list the instances.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRInstanceListCmdlet.InstanceGroupType"> <summary> <para> <para>The type of instance group for which to list the instances.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRInstanceListCmdlet.InstanceState"> <summary> <para> <para>A list of instance states that will filter the instances returned with this request.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRInstanceListCmdlet.Marker"> <summary> <para> <para>The pagination token that indicates the next set of results to retrieve.</para> </para> <para> <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call. <br/>'Marker' is only returned by the cmdlet when '-Select *' is specified. In order to manually control output pagination, set '-Marker' to null for the first call then set the 'Marker' using the same property output from the previous call for subsequent calls. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRInstanceListCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'Instances'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.ListInstancesResponse). Specifying the name of a property of type Amazon.ElasticMapReduce.Model.ListInstancesResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRInstanceListCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the InstanceGroupId parameter. The -PassThru parameter is deprecated, use -Select '^InstanceGroupId' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRInstanceListCmdlet.NoAutoIteration"> <summary> By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of Marker as the start point. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.EMR.GetEMRJobFlowCmdlet"> <summary> This API is no longer supported and will eventually be removed. We recommend you use <a>ListClusters</a>, <a>DescribeCluster</a>, <a>ListSteps</a>, <a>ListInstanceGroups</a> and <a>ListBootstrapActions</a> instead. <para> DescribeJobFlows returns a list of job flows that match all of the supplied parameters. The parameters can include a list of job flow IDs, job flow states, and restrictions on job flow creation date and time. </para><para> Regardless of supplied parameters, only job flows created within the last two months are returned. </para><para> If no parameters are supplied, then job flows matching either of the following criteria are returned: </para><ul><li><para> Job flows created and completed in the last two weeks </para></li><li><para> Job flows created within the last two months that are in one of the following states: <c>RUNNING</c>, <c>WAITING</c>, <c>SHUTTING_DOWN</c>, <c>STARTING</c></para></li></ul><para> Amazon EMR can return a maximum of 512 job flow descriptions. </para><br/><br/>This operation is deprecated. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRJobFlowCmdlet.CreatedAfter"> <summary> <para> <para>Return only job flows created after this date and time.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRJobFlowCmdlet.CreatedBefore"> <summary> <para> <para>Return only job flows created before this date and time.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRJobFlowCmdlet.JobFlowId"> <summary> <para> <para>Return only job flows whose job flow ID is contained in this list.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRJobFlowCmdlet.JobFlowState"> <summary> <para> <para>Return only job flows whose state is contained in this list.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRJobFlowCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'JobFlows'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.DescribeJobFlowsResponse). Specifying the name of a property of type Amazon.ElasticMapReduce.Model.DescribeJobFlowsResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRJobFlowCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the JobFlowId parameter. The -PassThru parameter is deprecated, use -Select '^JobFlowId' instead. This parameter will be removed in a future version. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.EMR.GetEMRManagedScalingPolicyCmdlet"> <summary> Fetches the attached managed scaling policy for an Amazon EMR cluster. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRManagedScalingPolicyCmdlet.ClusterId"> <summary> <para> <para>Specifies the ID of the cluster for which the managed scaling policy will be fetched. </para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRManagedScalingPolicyCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'ManagedScalingPolicy'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.GetManagedScalingPolicyResponse). Specifying the name of a property of type Amazon.ElasticMapReduce.Model.GetManagedScalingPolicyResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRManagedScalingPolicyCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the ClusterId parameter. The -PassThru parameter is deprecated, use -Select '^ClusterId' instead. This parameter will be removed in a future version. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.EMR.GetEMRNotebookExecutionCmdlet"> <summary> Provides details of a notebook execution. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRNotebookExecutionCmdlet.NotebookExecutionId"> <summary> <para> <para>The unique identifier of the notebook execution.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRNotebookExecutionCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'NotebookExecution'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.DescribeNotebookExecutionResponse). Specifying the name of a property of type Amazon.ElasticMapReduce.Model.DescribeNotebookExecutionResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRNotebookExecutionCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the NotebookExecutionId parameter. The -PassThru parameter is deprecated, use -Select '^NotebookExecutionId' instead. This parameter will be removed in a future version. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.EMR.GetEMRNotebookExecutionListCmdlet"> <summary> Provides summaries of all notebook executions. You can filter the list based on multiple criteria such as status, time range, and editor id. Returns a maximum of 50 notebook executions and a marker to track the paging of a longer notebook execution list across multiple <c>ListNotebookExecutions</c> calls.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRNotebookExecutionListCmdlet.EditorId"> <summary> <para> <para>The unique ID of the editor associated with the notebook execution.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRNotebookExecutionListCmdlet.ExecutionEngineId"> <summary> <para> <para>The unique ID of the execution engine.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRNotebookExecutionListCmdlet.From"> <summary> <para> <para>The beginning of time range filter for listing notebook executions. The default is the timestamp of 30 days ago.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRNotebookExecutionListCmdlet.Status"> <summary> <para> <para>The status filter for listing notebook executions.</para><ul><li><para><c>START_PENDING</c> indicates that the cluster has received the execution request but execution has not begun.</para></li><li><para><c>STARTING</c> indicates that the execution is starting on the cluster.</para></li><li><para><c>RUNNING</c> indicates that the execution is being processed by the cluster.</para></li><li><para><c>FINISHING</c> indicates that execution processing is in the final stages.</para></li><li><para><c>FINISHED</c> indicates that the execution has completed without error.</para></li><li><para><c>FAILING</c> indicates that the execution is failing and will not finish successfully.</para></li><li><para><c>FAILED</c> indicates that the execution failed.</para></li><li><para><c>STOP_PENDING</c> indicates that the cluster has received a <c>StopNotebookExecution</c> request and the stop is pending.</para></li><li><para><c>STOPPING</c> indicates that the cluster is in the process of stopping the execution as a result of a <c>StopNotebookExecution</c> request.</para></li><li><para><c>STOPPED</c> indicates that the execution stopped because of a <c>StopNotebookExecution</c> request.</para></li></ul> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRNotebookExecutionListCmdlet.To"> <summary> <para> <para>The end of time range filter for listing notebook executions. The default is the current timestamp.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRNotebookExecutionListCmdlet.Marker"> <summary> <para> <para>The pagination token, returned by a previous <c>ListNotebookExecutions</c> call, that indicates the start of the list for this <c>ListNotebookExecutions</c> call.</para> </para> <para> <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call. <br/>'Marker' is only returned by the cmdlet when '-Select *' is specified. In order to manually control output pagination, set '-Marker' to null for the first call then set the 'Marker' using the same property output from the previous call for subsequent calls. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRNotebookExecutionListCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'NotebookExecutions'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.ListNotebookExecutionsResponse). Specifying the name of a property of type Amazon.ElasticMapReduce.Model.ListNotebookExecutionsResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRNotebookExecutionListCmdlet.NoAutoIteration"> <summary> By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of Marker as the start point. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.EMR.GetEMRReleaseLabelCmdlet"> <summary> Provides Amazon EMR release label details, such as the releases available the Region where the API request is run, and the available applications for a specific Amazon EMR release label. Can also list Amazon EMR releases that support a specified version of Spark. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRReleaseLabelCmdlet.ReleaseLabel"> <summary> <para> <para>The target release label to be described.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRReleaseLabelCmdlet.MaxResult"> <summary> <para> <para>Reserved for future use. Currently set to null.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRReleaseLabelCmdlet.NextToken"> <summary> <para> <para>The pagination token. Reserved for future use. Currently set to null.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRReleaseLabelCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is '*'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.DescribeReleaseLabelResponse). Specifying the name of a property of type Amazon.ElasticMapReduce.Model.DescribeReleaseLabelResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRReleaseLabelCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the ReleaseLabel parameter. The -PassThru parameter is deprecated, use -Select '^ReleaseLabel' instead. This parameter will be removed in a future version. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.EMR.GetEMRSecurityConfigurationCmdlet"> <summary> Provides the details of a security configuration by returning the configuration JSON. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRSecurityConfigurationCmdlet.Name"> <summary> <para> <para>The name of the security configuration.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRSecurityConfigurationCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is '*'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.DescribeSecurityConfigurationResponse). Specifying the name of a property of type Amazon.ElasticMapReduce.Model.DescribeSecurityConfigurationResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRSecurityConfigurationCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the Name parameter. The -PassThru parameter is deprecated, use -Select '^Name' instead. This parameter will be removed in a future version. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.EMR.GetEMRSecurityConfigurationListCmdlet"> <summary> Lists all the security configurations visible to this account, providing their creation dates and times, and their names. This call returns a maximum of 50 clusters per call, but returns a marker to track the paging of the cluster list across multiple ListSecurityConfigurations calls.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRSecurityConfigurationListCmdlet.Marker"> <summary> <para> <para>The pagination token that indicates the set of results to retrieve.</para> </para> <para> <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call. <br/>'Marker' is only returned by the cmdlet when '-Select *' is specified. In order to manually control output pagination, set '-Marker' to null for the first call then set the 'Marker' using the same property output from the previous call for subsequent calls. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRSecurityConfigurationListCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'SecurityConfigurations'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.ListSecurityConfigurationsResponse). Specifying the name of a property of type Amazon.ElasticMapReduce.Model.ListSecurityConfigurationsResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRSecurityConfigurationListCmdlet.NoAutoIteration"> <summary> By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of Marker as the start point. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.EMR.GetEMRStepCmdlet"> <summary> Provides more detail about the cluster step. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRStepCmdlet.ClusterId"> <summary> <para> <para>The identifier of the cluster with steps to describe.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRStepCmdlet.StepId"> <summary> <para> <para>The identifier of the step to describe.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRStepCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'Step'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.DescribeStepResponse). Specifying the name of a property of type Amazon.ElasticMapReduce.Model.DescribeStepResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRStepCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the StepId parameter. The -PassThru parameter is deprecated, use -Select '^StepId' instead. This parameter will be removed in a future version. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.EMR.GetEMRStepListCmdlet"> <summary> Provides a list of steps for the cluster in reverse order unless you specify <c>stepIds</c> with the request or filter by <c>StepStates</c>. You can specify a maximum of 10 <c>stepIDs</c>. The CLI automatically paginates results to return a list greater than 50 steps. To return more than 50 steps using the CLI, specify a <c>Marker</c>, which is a pagination token that indicates the next set of steps to retrieve.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRStepListCmdlet.ClusterId"> <summary> <para> <para>The identifier of the cluster for which to list the steps.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRStepListCmdlet.StepId"> <summary> <para> <para>The filter to limit the step list based on the identifier of the steps. You can specify a maximum of ten Step IDs. The character constraint applies to the overall length of the array.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRStepListCmdlet.StepState"> <summary> <para> <para>The filter to limit the step list based on certain states.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRStepListCmdlet.Marker"> <summary> <para> <para>The maximum number of steps that a single <c>ListSteps</c> action returns is 50. To return a longer list of steps, use multiple <c>ListSteps</c> actions along with the <c>Marker</c> parameter, which is a pagination token that indicates the next set of results to retrieve.</para> </para> <para> <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call. <br/>'Marker' is only returned by the cmdlet when '-Select *' is specified. In order to manually control output pagination, set '-Marker' to null for the first call then set the 'Marker' using the same property output from the previous call for subsequent calls. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRStepListCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'Steps'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.ListStepsResponse). Specifying the name of a property of type Amazon.ElasticMapReduce.Model.ListStepsResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRStepListCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the ClusterId parameter. The -PassThru parameter is deprecated, use -Select '^ClusterId' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRStepListCmdlet.NoAutoIteration"> <summary> By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of Marker as the start point. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.EMR.GetEMRStudioCmdlet"> <summary> Returns details for the specified Amazon EMR Studio including ID, Name, VPC, Studio access URL, and so on. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRStudioCmdlet.StudioId"> <summary> <para> <para>The Amazon EMR Studio ID.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRStudioCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'Studio'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.DescribeStudioResponse). Specifying the name of a property of type Amazon.ElasticMapReduce.Model.DescribeStudioResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRStudioCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the StudioId parameter. The -PassThru parameter is deprecated, use -Select '^StudioId' instead. This parameter will be removed in a future version. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.EMR.GetEMRStudioListCmdlet"> <summary> Returns a list of all Amazon EMR Studios associated with the Amazon Web Services account. The list includes details such as ID, Studio Access URL, and creation time for each Studio.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRStudioListCmdlet.Marker"> <summary> <para> <para>The pagination token that indicates the set of results to retrieve.</para> </para> <para> <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call. <br/>'Marker' is only returned by the cmdlet when '-Select *' is specified. In order to manually control output pagination, set '-Marker' to null for the first call then set the 'Marker' using the same property output from the previous call for subsequent calls. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRStudioListCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'Studios'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.ListStudiosResponse). Specifying the name of a property of type Amazon.ElasticMapReduce.Model.ListStudiosResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRStudioListCmdlet.NoAutoIteration"> <summary> By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of Marker as the start point. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.EMR.GetEMRStudioSessionMappingCmdlet"> <summary> Fetches mapping details for the specified Amazon EMR Studio and identity (user or group). </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRStudioSessionMappingCmdlet.IdentityId"> <summary> <para> <para>The globally unique identifier (GUID) of the user or group. For more information, see <a href="https://docs.aws.amazon.com/singlesignon/latest/IdentityStoreAPIReference/API_User.html#singlesignon-Type-User-UserId">UserId</a> and <a href="https://docs.aws.amazon.com/singlesignon/latest/IdentityStoreAPIReference/API_Group.html#singlesignon-Type-Group-GroupId">GroupId</a> in the <i>IAM Identity Center Identity Store API Reference</i>. Either <c>IdentityName</c> or <c>IdentityId</c> must be specified.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRStudioSessionMappingCmdlet.IdentityName"> <summary> <para> <para>The name of the user or group to fetch. For more information, see <a href="https://docs.aws.amazon.com/singlesignon/latest/IdentityStoreAPIReference/API_User.html#singlesignon-Type-User-UserName">UserName</a> and <a href="https://docs.aws.amazon.com/singlesignon/latest/IdentityStoreAPIReference/API_Group.html#singlesignon-Type-Group-DisplayName">DisplayName</a> in the <i>IAM Identity Center Identity Store API Reference</i>. Either <c>IdentityName</c> or <c>IdentityId</c> must be specified.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRStudioSessionMappingCmdlet.IdentityType"> <summary> <para> <para>Specifies whether the identity to fetch is a user or a group.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRStudioSessionMappingCmdlet.StudioId"> <summary> <para> <para>The ID of the Amazon EMR Studio.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRStudioSessionMappingCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'SessionMapping'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.GetStudioSessionMappingResponse). Specifying the name of a property of type Amazon.ElasticMapReduce.Model.GetStudioSessionMappingResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.EMR.GetEMRStudioSessionMappingListCmdlet"> <summary> Returns a list of all user or group session mappings for the Amazon EMR Studio specified by <c>StudioId</c>.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRStudioSessionMappingListCmdlet.IdentityType"> <summary> <para> <para>Specifies whether to return session mappings for users or groups. If not specified, the results include session mapping details for both users and groups.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRStudioSessionMappingListCmdlet.StudioId"> <summary> <para> <para>The ID of the Amazon EMR Studio.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRStudioSessionMappingListCmdlet.Marker"> <summary> <para> <para>The pagination token that indicates the set of results to retrieve.</para> </para> <para> <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call. <br/>'Marker' is only returned by the cmdlet when '-Select *' is specified. In order to manually control output pagination, set '-Marker' to null for the first call then set the 'Marker' using the same property output from the previous call for subsequent calls. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRStudioSessionMappingListCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'SessionMappings'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.ListStudioSessionMappingsResponse). Specifying the name of a property of type Amazon.ElasticMapReduce.Model.ListStudioSessionMappingsResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRStudioSessionMappingListCmdlet.NoAutoIteration"> <summary> By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of Marker as the start point. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.EMR.GetEMRSupportedInstanceTypeCmdlet"> <summary> A list of the instance types that Amazon EMR supports. You can filter the list by Amazon Web Services Region and Amazon EMR release.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRSupportedInstanceTypeCmdlet.ReleaseLabel"> <summary> <para> <para>The Amazon EMR release label determines the <a href="https://docs.aws.amazon.com/emr/latest/ReleaseGuide/emr-release-app-versions-6.x.html">versions of open-source application packages</a> that Amazon EMR has installed on the cluster. Release labels are in the format <c>emr-x.x.x</c>, where x.x.x is an Amazon EMR release number such as <c>emr-6.10.0</c>. For more information about Amazon EMR releases and their included application versions and features, see the <i><a href="https://docs.aws.amazon.com/emr/latest/ReleaseGuide/emr-release-components.html">Amazon EMR Release Guide</a></i>.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRSupportedInstanceTypeCmdlet.Marker"> <summary> <para> <para>The pagination token that marks the next set of results to retrieve.</para> </para> <para> <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call. <br/>'Marker' is only returned by the cmdlet when '-Select *' is specified. In order to manually control output pagination, set '-Marker' to null for the first call then set the 'Marker' using the same property output from the previous call for subsequent calls. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRSupportedInstanceTypeCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'SupportedInstanceTypes'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.ListSupportedInstanceTypesResponse). Specifying the name of a property of type Amazon.ElasticMapReduce.Model.ListSupportedInstanceTypesResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRSupportedInstanceTypeCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the ReleaseLabel parameter. The -PassThru parameter is deprecated, use -Select '^ReleaseLabel' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRSupportedInstanceTypeCmdlet.NoAutoIteration"> <summary> By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of Marker as the start point. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.EMR.NewEMRSecurityConfigurationCmdlet"> <summary> Creates a security configuration, which is stored in the service and can be specified when a cluster is created. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.NewEMRSecurityConfigurationCmdlet.Name"> <summary> <para> <para>The name of the security configuration.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.NewEMRSecurityConfigurationCmdlet.SecurityConfiguration"> <summary> <para> <para>The security configuration details in JSON format. For JSON parameters and examples, see <a href="https://docs.aws.amazon.com/emr/latest/ManagementGuide/emr-security-configurations.html">Use Security Configurations to Set Up Cluster Security</a> in the <i>Amazon EMR Management Guide</i>.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.NewEMRSecurityConfigurationCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is '*'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.CreateSecurityConfigurationResponse). Specifying the name of a property of type Amazon.ElasticMapReduce.Model.CreateSecurityConfigurationResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.NewEMRSecurityConfigurationCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the SecurityConfiguration parameter. The -PassThru parameter is deprecated, use -Select '^SecurityConfiguration' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.NewEMRSecurityConfigurationCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.EMR.NewEMRStudioCmdlet"> <summary> Creates a new Amazon EMR Studio. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.NewEMRStudioCmdlet.AuthMode"> <summary> <para> <para>Specifies whether the Studio authenticates users using IAM or IAM Identity Center.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.NewEMRStudioCmdlet.DefaultS3Location"> <summary> <para> <para>The Amazon S3 location to back up Amazon EMR Studio Workspaces and notebook files.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.NewEMRStudioCmdlet.Description"> <summary> <para> <para>A detailed description of the Amazon EMR Studio.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.NewEMRStudioCmdlet.EncryptionKeyArn"> <summary> <para> <para>The KMS key identifier (ARN) used to encrypt Amazon EMR Studio workspace and notebook files when backed up to Amazon S3.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.NewEMRStudioCmdlet.EngineSecurityGroupId"> <summary> <para> <para>The ID of the Amazon EMR Studio Engine security group. The Engine security group allows inbound network traffic from the Workspace security group, and it must be in the same VPC specified by <c>VpcId</c>.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.NewEMRStudioCmdlet.IdcInstanceArn"> <summary> <para> <para> The ARN of the IAM Identity Center instance to create the Studio application. </para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.NewEMRStudioCmdlet.IdcUserAssignment"> <summary> <para> <para> Specifies whether IAM Identity Center user assignment is <c>REQUIRED</c> or <c>OPTIONAL</c>. If the value is set to <c>REQUIRED</c>, users must be explicitly assigned to the Studio application to access the Studio. </para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.NewEMRStudioCmdlet.IdpAuthUrl"> <summary> <para> <para>The authentication endpoint of your identity provider (IdP). Specify this value when you use IAM authentication and want to let federated users log in to a Studio with the Studio URL and credentials from your IdP. Amazon EMR Studio redirects users to this endpoint to enter credentials.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.NewEMRStudioCmdlet.IdpRelayStateParameterName"> <summary> <para> <para>The name that your identity provider (IdP) uses for its <c>RelayState</c> parameter. For example, <c>RelayState</c> or <c>TargetSource</c>. Specify this value when you use IAM authentication and want to let federated users log in to a Studio using the Studio URL. The <c>RelayState</c> parameter differs by IdP.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.NewEMRStudioCmdlet.Name"> <summary> <para> <para>A descriptive name for the Amazon EMR Studio.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.NewEMRStudioCmdlet.ServiceRole"> <summary> <para> <para>The IAM role that the Amazon EMR Studio assumes. The service role provides a way for Amazon EMR Studio to interoperate with other Amazon Web Services services.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.NewEMRStudioCmdlet.SubnetId"> <summary> <para> <para>A list of subnet IDs to associate with the Amazon EMR Studio. A Studio can have a maximum of 5 subnets. The subnets must belong to the VPC specified by <c>VpcId</c>. Studio users can create a Workspace in any of the specified subnets.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.NewEMRStudioCmdlet.Tag"> <summary> <para> <para>A list of tags to associate with the Amazon EMR Studio. Tags are user-defined key-value pairs that consist of a required key string with a maximum of 128 characters, and an optional value string with a maximum of 256 characters.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.NewEMRStudioCmdlet.TrustedIdentityPropagationEnabled"> <summary> <para> <para> A Boolean indicating whether to enable Trusted identity propagation for the Studio. The default value is <c>false</c>. </para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.NewEMRStudioCmdlet.UserRole"> <summary> <para> <para>The IAM user role that users and groups assume when logged in to an Amazon EMR Studio. Only specify a <c>UserRole</c> when you use IAM Identity Center authentication. The permissions attached to the <c>UserRole</c> can be scoped down for each user or group using session policies.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.NewEMRStudioCmdlet.VpcId"> <summary> <para> <para>The ID of the Amazon Virtual Private Cloud (Amazon VPC) to associate with the Studio.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.NewEMRStudioCmdlet.WorkspaceSecurityGroupId"> <summary> <para> <para>The ID of the Amazon EMR Studio Workspace security group. The Workspace security group allows outbound network traffic to resources in the Engine security group, and it must be in the same VPC specified by <c>VpcId</c>.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.NewEMRStudioCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is '*'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.CreateStudioResponse). Specifying the name of a property of type Amazon.ElasticMapReduce.Model.CreateStudioResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.NewEMRStudioCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.EMR.NewEMRStudioSessionMappingCmdlet"> <summary> Maps a user or group to the Amazon EMR Studio specified by <c>StudioId</c>, and applies a session policy to refine Studio permissions for that user or group. Use <c>CreateStudioSessionMapping</c> to assign users to a Studio when you use IAM Identity Center authentication. For instructions on how to assign users to a Studio when you use IAM authentication, see <a href="https://docs.aws.amazon.com/emr/latest/ManagementGuide/emr-studio-manage-users.html#emr-studio-assign-users-groups">Assign a user or group to your EMR Studio</a>. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.NewEMRStudioSessionMappingCmdlet.IdentityId"> <summary> <para> <para>The globally unique identifier (GUID) of the user or group from the IAM Identity Center Identity Store. For more information, see <a href="https://docs.aws.amazon.com/singlesignon/latest/IdentityStoreAPIReference/API_User.html#singlesignon-Type-User-UserId">UserId</a> and <a href="https://docs.aws.amazon.com/singlesignon/latest/IdentityStoreAPIReference/API_Group.html#singlesignon-Type-Group-GroupId">GroupId</a> in the <i>IAM Identity Center Identity Store API Reference</i>. Either <c>IdentityName</c> or <c>IdentityId</c> must be specified, but not both.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.NewEMRStudioSessionMappingCmdlet.IdentityName"> <summary> <para> <para>The name of the user or group. For more information, see <a href="https://docs.aws.amazon.com/singlesignon/latest/IdentityStoreAPIReference/API_User.html#singlesignon-Type-User-UserName">UserName</a> and <a href="https://docs.aws.amazon.com/singlesignon/latest/IdentityStoreAPIReference/API_Group.html#singlesignon-Type-Group-DisplayName">DisplayName</a> in the <i>IAM Identity Center Identity Store API Reference</i>. Either <c>IdentityName</c> or <c>IdentityId</c> must be specified, but not both.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.NewEMRStudioSessionMappingCmdlet.IdentityType"> <summary> <para> <para>Specifies whether the identity to map to the Amazon EMR Studio is a user or a group.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.NewEMRStudioSessionMappingCmdlet.SessionPolicyArn"> <summary> <para> <para>The Amazon Resource Name (ARN) for the session policy that will be applied to the user or group. You should specify the ARN for the session policy that you want to apply, not the ARN of your user role. For more information, see <a href="https://docs.aws.amazon.com/emr/latest/ManagementGuide/emr-studio-user-role.html">Create an Amazon EMR Studio User Role with Session Policies</a>.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.NewEMRStudioSessionMappingCmdlet.StudioId"> <summary> <para> <para>The ID of the Amazon EMR Studio to which the user or group will be mapped.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.NewEMRStudioSessionMappingCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.CreateStudioSessionMappingResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.NewEMRStudioSessionMappingCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.EMR.RemoveEMRAutoScalingPolicyCmdlet"> <summary> Removes an automatic scaling policy from a specified instance group within an Amazon EMR cluster. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.RemoveEMRAutoScalingPolicyCmdlet.ClusterId"> <summary> <para> <para>Specifies the ID of a cluster. The instance group to which the automatic scaling policy is applied is within this cluster.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.RemoveEMRAutoScalingPolicyCmdlet.InstanceGroupId"> <summary> <para> <para>Specifies the ID of the instance group to which the scaling policy is applied.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.RemoveEMRAutoScalingPolicyCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.RemoveAutoScalingPolicyResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.RemoveEMRAutoScalingPolicyCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the ClusterId parameter. The -PassThru parameter is deprecated, use -Select '^ClusterId' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.RemoveEMRAutoScalingPolicyCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.EMR.RemoveEMRAutoTerminationPolicyCmdlet"> <summary> Removes an auto-termination policy from an Amazon EMR cluster. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.RemoveEMRAutoTerminationPolicyCmdlet.ClusterId"> <summary> <para> <para>Specifies the ID of the Amazon EMR cluster from which the auto-termination policy will be removed.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.RemoveEMRAutoTerminationPolicyCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.RemoveAutoTerminationPolicyResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.RemoveEMRAutoTerminationPolicyCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the ClusterId parameter. The -PassThru parameter is deprecated, use -Select '^ClusterId' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.RemoveEMRAutoTerminationPolicyCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.EMR.RemoveEMRManagedScalingPolicyCmdlet"> <summary> Removes a managed scaling policy from a specified Amazon EMR cluster. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.RemoveEMRManagedScalingPolicyCmdlet.ClusterId"> <summary> <para> <para> Specifies the ID of the cluster from which the managed scaling policy will be removed. </para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.RemoveEMRManagedScalingPolicyCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.RemoveManagedScalingPolicyResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.RemoveEMRManagedScalingPolicyCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the ClusterId parameter. The -PassThru parameter is deprecated, use -Select '^ClusterId' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.RemoveEMRManagedScalingPolicyCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.EMR.RemoveEMRResourceTagCmdlet"> <summary> Removes tags from an Amazon EMR resource, such as a cluster or Amazon EMR Studio. Tags make it easier to associate resources in various ways, such as grouping clusters to track your Amazon EMR resource allocation costs. For more information, see <a href="https://docs.aws.amazon.com/emr/latest/ManagementGuide/emr-plan-tags.html">Tag Clusters</a>. <para> The following example removes the stack tag with value Prod from a cluster: </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.RemoveEMRResourceTagCmdlet.ResourceId"> <summary> <para> <para>The Amazon EMR resource identifier from which tags will be removed. For example, a cluster identifier or an Amazon EMR Studio ID.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.RemoveEMRResourceTagCmdlet.TagKey"> <summary> <para> <para>A list of tag keys to remove from the resource.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.RemoveEMRResourceTagCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.RemoveTagsResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.RemoveEMRResourceTagCmdlet.PassThru"> <summary> Returns the collection of Tag keys that were removed The -PassThru parameter is deprecated, use -Select instead. This parameter will be removed in future </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.RemoveEMRResourceTagCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.EMR.RemoveEMRSecurityConfigurationCmdlet"> <summary> Deletes a security configuration. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.RemoveEMRSecurityConfigurationCmdlet.Name"> <summary> <para> <para>The name of the security configuration.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.RemoveEMRSecurityConfigurationCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.DeleteSecurityConfigurationResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.RemoveEMRSecurityConfigurationCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the Name parameter. The -PassThru parameter is deprecated, use -Select '^Name' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.RemoveEMRSecurityConfigurationCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.EMR.RemoveEMRStudioCmdlet"> <summary> Removes an Amazon EMR Studio from the Studio metadata store. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.RemoveEMRStudioCmdlet.StudioId"> <summary> <para> <para>The ID of the Amazon EMR Studio.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.RemoveEMRStudioCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.DeleteStudioResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.RemoveEMRStudioCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the StudioId parameter. The -PassThru parameter is deprecated, use -Select '^StudioId' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.RemoveEMRStudioCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.EMR.RemoveEMRStudioSessionMappingCmdlet"> <summary> Removes a user or group from an Amazon EMR Studio. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.RemoveEMRStudioSessionMappingCmdlet.IdentityId"> <summary> <para> <para>The globally unique identifier (GUID) of the user or group to remove from the Amazon EMR Studio. For more information, see <a href="https://docs.aws.amazon.com/singlesignon/latest/IdentityStoreAPIReference/API_User.html#singlesignon-Type-User-UserId">UserId</a> and <a href="https://docs.aws.amazon.com/singlesignon/latest/IdentityStoreAPIReference/API_Group.html#singlesignon-Type-Group-GroupId">GroupId</a> in the <i>IAM Identity Center Identity Store API Reference</i>. Either <c>IdentityName</c> or <c>IdentityId</c> must be specified.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.RemoveEMRStudioSessionMappingCmdlet.IdentityName"> <summary> <para> <para>The name of the user name or group to remove from the Amazon EMR Studio. For more information, see <a href="https://docs.aws.amazon.com/singlesignon/latest/IdentityStoreAPIReference/API_User.html#singlesignon-Type-User-UserName">UserName</a> and <a href="https://docs.aws.amazon.com/singlesignon/latest/IdentityStoreAPIReference/API_Group.html#singlesignon-Type-Group-DisplayName">DisplayName</a> in the <i>IAM Identity Center Store API Reference</i>. Either <c>IdentityName</c> or <c>IdentityId</c> must be specified.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.RemoveEMRStudioSessionMappingCmdlet.IdentityType"> <summary> <para> <para>Specifies whether the identity to delete from the Amazon EMR Studio is a user or a group.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.RemoveEMRStudioSessionMappingCmdlet.StudioId"> <summary> <para> <para>The ID of the Amazon EMR Studio.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.RemoveEMRStudioSessionMappingCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.DeleteStudioSessionMappingResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.RemoveEMRStudioSessionMappingCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.EMR.SetEMRKeepJobFlowAliveWhenNoStepCmdlet"> <summary> You can use the <c>SetKeepJobFlowAliveWhenNoSteps</c> to configure a cluster (job flow) to terminate after the step execution, i.e., all your steps are executed. If you want a transient cluster that shuts down after the last of the current executing steps are completed, you can configure <c>SetKeepJobFlowAliveWhenNoSteps</c> to false. If you want a long running cluster, configure <c>SetKeepJobFlowAliveWhenNoSteps</c> to true. <para> For more information, see <a href="https://docs.aws.amazon.com/emr/latest/ManagementGuide/UsingEMR_TerminationProtection.html">Managing Cluster Termination</a> in the <i>Amazon EMR Management Guide</i>. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.SetEMRKeepJobFlowAliveWhenNoStepCmdlet.JobFlowId"> <summary> <para> <para>A list of strings that uniquely identify the clusters to protect. This identifier is returned by <a href="https://docs.aws.amazon.com/emr/latest/APIReference/API_RunJobFlow.html">RunJobFlow</a> and can also be obtained from <a href="https://docs.aws.amazon.com/emr/latest/APIReference/API_DescribeJobFlows.html">DescribeJobFlows</a>.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.SetEMRKeepJobFlowAliveWhenNoStepCmdlet.KeepJobFlowAliveWhenNoStep"> <summary> <para> <para>A Boolean that indicates whether to terminate the cluster after all steps are executed.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.SetEMRKeepJobFlowAliveWhenNoStepCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.SetKeepJobFlowAliveWhenNoStepsResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.SetEMRKeepJobFlowAliveWhenNoStepCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the KeepJobFlowAliveWhenNoStep parameter. The -PassThru parameter is deprecated, use -Select '^KeepJobFlowAliveWhenNoStep' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.SetEMRKeepJobFlowAliveWhenNoStepCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.EMR.SetEMRTerminationProtectionCmdlet"> <summary> SetTerminationProtection locks a cluster (job flow) so the Amazon EC2 instances in the cluster cannot be terminated by user intervention, an API call, or in the event of a job-flow error. The cluster still terminates upon successful completion of the job flow. Calling <c>SetTerminationProtection</c> on a cluster is similar to calling the Amazon EC2 <c>DisableAPITermination</c> API on all Amazon EC2 instances in a cluster. <para><c>SetTerminationProtection</c> is used to prevent accidental termination of a cluster and to ensure that in the event of an error, the instances persist so that you can recover any data stored in their ephemeral instance storage. </para><para> To terminate a cluster that has been locked by setting <c>SetTerminationProtection</c> to <c>true</c>, you must first unlock the job flow by a subsequent call to <c>SetTerminationProtection</c> in which you set the value to <c>false</c>. </para><para> For more information, see <a href="https://docs.aws.amazon.com/emr/latest/ManagementGuide/UsingEMR_TerminationProtection.html">Managing Cluster Termination</a> in the <i>Amazon EMR Management Guide</i>. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.SetEMRTerminationProtectionCmdlet.JobFlowId"> <summary> <para> <para> A list of strings that uniquely identify the clusters to protect. This identifier is returned by <a>RunJobFlow</a> and can also be obtained from <a>DescribeJobFlows</a> . </para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.SetEMRTerminationProtectionCmdlet.TerminationProtected"> <summary> <para> <para>A Boolean that indicates whether to protect the cluster and prevent the Amazon EC2 instances in the cluster from shutting down due to API calls, user intervention, or job-flow error.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.SetEMRTerminationProtectionCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.SetTerminationProtectionResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.SetEMRTerminationProtectionCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the JobFlowId parameter. The -PassThru parameter is deprecated, use -Select '^JobFlowId' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.SetEMRTerminationProtectionCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.EMR.SetEMRUnhealthyNodeReplacementCmdlet"> <summary> Specify whether to enable unhealthy node replacement, which lets Amazon EMR gracefully replace core nodes on a cluster if any nodes become unhealthy. For example, a node becomes unhealthy if disk usage is above 90%. If unhealthy node replacement is on and <c>TerminationProtected</c> are off, Amazon EMR immediately terminates the unhealthy core nodes. To use unhealthy node replacement and retain unhealthy core nodes, use to turn on termination protection. In such cases, Amazon EMR adds the unhealthy nodes to a denylist, reducing job interruptions and failures. <para> If unhealthy node replacement is on, Amazon EMR notifies YARN and other applications on the cluster to stop scheduling tasks with these nodes, moves the data, and then terminates the nodes. </para><para> For more information, see <a href="https://docs.aws.amazon.com/emr/latest/ManagementGuide/emr-plan-node-replacement.html">graceful node replacement</a> in the <i>Amazon EMR Management Guide</i>. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.SetEMRUnhealthyNodeReplacementCmdlet.JobFlowId"> <summary> <para> <para>The list of strings that uniquely identify the clusters for which to turn on unhealthy node replacement. You can get these identifiers by running the <a>RunJobFlow</a> or the <a>DescribeJobFlows</a> operations.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.SetEMRUnhealthyNodeReplacementCmdlet.UnhealthyNodeReplacement"> <summary> <para> <para>Indicates whether to turn on or turn off graceful unhealthy node replacement.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.SetEMRUnhealthyNodeReplacementCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.SetUnhealthyNodeReplacementResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.SetEMRUnhealthyNodeReplacementCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the UnhealthyNodeReplacement parameter. The -PassThru parameter is deprecated, use -Select '^UnhealthyNodeReplacement' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.SetEMRUnhealthyNodeReplacementCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.EMR.SetEMRVisibleToAllUserCmdlet"> <summary> <important><para> The SetVisibleToAllUsers parameter is no longer supported. Your cluster may be visible to all users in your account. To restrict cluster access using an IAM policy, see <a href="https://docs.aws.amazon.com/emr/latest/ManagementGuide/emr-plan-access-IAM.html">Identity and Access Management for Amazon EMR</a>. </para></important><para> Sets the <a>Cluster$VisibleToAllUsers</a> value for an Amazon EMR cluster. When <c>true</c>, IAM principals in the Amazon Web Services account can perform Amazon EMR cluster actions that their IAM policies allow. When <c>false</c>, only the IAM principal that created the cluster and the Amazon Web Services account root user can perform Amazon EMR actions on the cluster, regardless of IAM permissions policies attached to other IAM principals. </para><para> This action works on running clusters. When you create a cluster, use the <a>RunJobFlowInput$VisibleToAllUsers</a> parameter. </para><para> For more information, see <a href="https://docs.aws.amazon.com/emr/latest/ManagementGuide/security_IAM_emr-with-IAM.html#security_set_visible_to_all_users">Understanding the Amazon EMR Cluster VisibleToAllUsers Setting</a> in the <i>Amazon EMR Management Guide</i>. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.SetEMRVisibleToAllUserCmdlet.JobFlowId"> <summary> <para> <para>The unique identifier of the job flow (cluster).</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.SetEMRVisibleToAllUserCmdlet.VisibleToAllUser"> <summary> <para> <para>A value of <c>true</c> indicates that an IAM principal in the Amazon Web Services account can perform Amazon EMR actions on the cluster that the IAM policies attached to the principal allow. A value of <c>false</c> indicates that only the IAM principal that created the cluster and the Amazon Web Services root user can perform Amazon EMR actions on the cluster.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.SetEMRVisibleToAllUserCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.SetVisibleToAllUsersResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.SetEMRVisibleToAllUserCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the JobFlowId parameter. The -PassThru parameter is deprecated, use -Select '^JobFlowId' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.SetEMRVisibleToAllUserCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet"> <summary> RunJobFlow creates and starts running a new cluster (job flow). The cluster runs the steps specified. After the steps complete, the cluster stops and the HDFS partition is lost. To prevent loss of data, configure the last step of the job flow to store results in Amazon S3. If the <a>JobFlowInstancesConfig</a><c>KeepJobFlowAliveWhenNoSteps</c> parameter is set to <c>TRUE</c>, the cluster transitions to the WAITING state rather than shutting down after the steps have completed. <para> For additional protection, you can set the <a>JobFlowInstancesConfig</a><c>TerminationProtected</c> parameter to <c>TRUE</c> to lock the cluster and prevent it from being terminated by API call, user intervention, or in the event of a job flow error. </para><para> A maximum of 256 steps are allowed in each job flow. </para><para> If your cluster is long-running (such as a Hive data warehouse) or complex, you may require more than 256 steps to process your data. You can bypass the 256-step limitation in various ways, including using the SSH shell to connect to the master node and submitting queries directly to the software running on the master node, such as Hive and Hadoop. </para><para> For long-running clusters, we recommend that you periodically store your results. </para><note><para> The instance fleets configuration is available only in Amazon EMR releases 4.8.0 and later, excluding 5.0.x versions. The RunJobFlow request can contain InstanceFleets parameters or InstanceGroups parameters, but not both. </para></note> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.AdditionalInfo"> <summary> <para> <para>A JSON string for selecting additional features.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.Instances_AdditionalMasterSecurityGroup"> <summary> <para> <para>A list of additional Amazon EC2 security group IDs for the master node.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.Instances_AdditionalSlaveSecurityGroup"> <summary> <para> <para>A list of additional Amazon EC2 security group IDs for the core and task nodes.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.KerberosAttributes_ADDomainJoinPassword"> <summary> <para> <para>The Active Directory password for <c>ADDomainJoinUser</c>.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.KerberosAttributes_ADDomainJoinUser"> <summary> <para> <para>Required only when establishing a cross-realm trust with an Active Directory domain. A user with sufficient privileges to join resources to the domain.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.AmiVersion"> <summary> <para> <para>Applies only to Amazon EMR AMI versions 3.x and 2.x. For Amazon EMR releases 4.0 and later, <c>ReleaseLabel</c> is used. To specify a custom AMI, use <c>CustomAmiID</c>.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.Application"> <summary> <para> <para>Applies to Amazon EMR releases 4.0 and later. A case-insensitive list of applications for Amazon EMR to install and configure when launching the cluster. For a list of applications available for each Amazon EMR release version, see the <a href="https://docs.aws.amazon.com/emr/latest/ReleaseGuide/">Amazon EMRRelease Guide</a>.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.AutoScalingRole"> <summary> <para> <para>An IAM role for automatic scaling policies. The default role is <c>EMR_AutoScaling_DefaultRole</c>. The IAM role provides permissions that the automatic scaling feature requires to launch and terminate Amazon EC2 instances in an instance group.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.Instances_Placement_AvailabilityZone"> <summary> <para> <para>The Amazon EC2 Availability Zone for the cluster. <c>AvailabilityZone</c> is used for uniform instance groups, while <c>AvailabilityZones</c> (plural) is used for instance fleets.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.Instances_Placement_AvailabilityZones"> <summary> <para> <para>When multiple Availability Zones are specified, Amazon EMR evaluates them and launches instances in the optimal Availability Zone. <c>AvailabilityZones</c> is used for instance fleets, while <c>AvailabilityZone</c> (singular) is used for uniform instance groups.</para><note><para>The instance fleet configuration is available only in Amazon EMR releases 4.8.0 and later, excluding 5.0.x versions.</para></note> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.BootstrapAction"> <summary> <para> <para>A list of bootstrap actions to run before Hadoop starts on the cluster nodes.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.Configuration"> <summary> <para> <para>For Amazon EMR releases 4.0 and later. The list of configurations supplied for the Amazon EMR cluster that you are creating.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.KerberosAttributes_CrossRealmTrustPrincipalPassword"> <summary> <para> <para>Required only when establishing a cross-realm trust with a KDC in a different realm. The cross-realm principal password, which must be identical across realms.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.CustomAmiId"> <summary> <para> <para>Available only in Amazon EMR releases 5.7.0 and later. The ID of a custom Amazon EBS-backed Linux AMI. If specified, Amazon EMR uses this AMI when it launches cluster Amazon EC2 instances. For more information about custom AMIs in Amazon EMR, see <a href="https://docs.aws.amazon.com/emr/latest/ManagementGuide/emr-custom-ami.html">Using a Custom AMI</a> in the <i>Amazon EMR Management Guide</i>. If omitted, the cluster uses the base Linux AMI for the <c>ReleaseLabel</c> specified. For Amazon EMR releases 2.x and 3.x, use <c>AmiVersion</c> instead.</para><para>For information about creating a custom AMI, see <a href="https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/creating-an-ami-ebs.html">Creating an Amazon EBS-Backed Linux AMI</a> in the <i>Amazon Elastic Compute Cloud User Guide for Linux Instances</i>. For information about finding an AMI ID, see <a href="https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/finding-an-ami.html">Finding a Linux AMI</a>. </para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.EbsRootVolumeIops"> <summary> <para> <para>The IOPS, of the Amazon EBS root device volume of the Linux AMI that is used for each Amazon EC2 instance. Available in Amazon EMR releases 6.15.0 and later.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.EbsRootVolumeSize"> <summary> <para> <para>The size, in GiB, of the Amazon EBS root device volume of the Linux AMI that is used for each Amazon EC2 instance. Available in Amazon EMR releases 4.x and later.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.EbsRootVolumeThroughput"> <summary> <para> <para>The throughput, in MiB/s, of the Amazon EBS root device volume of the Linux AMI that is used for each Amazon EC2 instance. Available in Amazon EMR releases 6.15.0 and later.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.Instances_Ec2KeyName"> <summary> <para> <para>The name of the Amazon EC2 key pair that can be used to connect to the master node using SSH as the user called "hadoop."</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.Instances_Ec2SubnetId"> <summary> <para> <para>Applies to clusters that use the uniform instance group configuration. To launch the cluster in Amazon Virtual Private Cloud (Amazon VPC), set this parameter to the identifier of the Amazon VPC subnet where you want the cluster to launch. If you do not specify this value and your account supports EC2-Classic, the cluster launches in EC2-Classic.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.Instances_Ec2SubnetIds"> <summary> <para> <para>Applies to clusters that use the instance fleet configuration. When multiple Amazon EC2 subnet IDs are specified, Amazon EMR evaluates them and launches instances in the optimal subnet.</para><note><para>The instance fleet configuration is available only in Amazon EMR releases 4.8.0 and later, excluding 5.0.x versions.</para></note> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.Instances_EmrManagedMasterSecurityGroup"> <summary> <para> <para>The identifier of the Amazon EC2 security group for the master node. If you specify <c>EmrManagedMasterSecurityGroup</c>, you must also specify <c>EmrManagedSlaveSecurityGroup</c>.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.Instances_EmrManagedSlaveSecurityGroup"> <summary> <para> <para>The identifier of the Amazon EC2 security group for the core and task nodes. If you specify <c>EmrManagedSlaveSecurityGroup</c>, you must also specify <c>EmrManagedMasterSecurityGroup</c>.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.Instances_HadoopVersion"> <summary> <para> <para>Applies only to Amazon EMR release versions earlier than 4.0. The Hadoop version for the cluster. Valid inputs are "0.18" (no longer maintained), "0.20" (no longer maintained), "0.20.205" (no longer maintained), "1.0.3", "2.2.0", or "2.4.0". If you do not set this value, the default of 0.18 is used, unless the <c>AmiVersion</c> parameter is set in the RunJobFlow call, in which case the default version of Hadoop for that AMI version is used.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.AutoTerminationPolicy_IdleTimeout"> <summary> <para> <para>Specifies the amount of idle time in seconds after which the cluster automatically terminates. You can specify a minimum of 60 seconds and a maximum of 604800 seconds (seven days).</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.Instances_InstanceCount"> <summary> <para> <para>The number of Amazon EC2 instances in the cluster.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.Instances_InstanceFleet"> <summary> <para> <note><para>The instance fleet configuration is available only in Amazon EMR releases 4.8.0 and later, excluding 5.0.x versions.</para></note><para>Describes the Amazon EC2 instances and instance configurations for clusters that use the instance fleet configuration.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.Instances_InstanceGroup"> <summary> <para> <para>Configuration for the instance groups in a cluster.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.JobFlowRole"> <summary> <para> <para>Also called instance profile and Amazon EC2 role. An IAM role for an Amazon EMR cluster. The Amazon EC2 instances of the cluster assume this role. The default role is <c>EMR_EC2_DefaultRole</c>. In order to use the default role, you must have already created it using the CLI or console.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.KerberosAttributes_KdcAdminPassword"> <summary> <para> <para>The password used within the cluster for the kadmin service on the cluster-dedicated KDC, which maintains Kerberos principals, password policies, and keytabs for the cluster.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.Instances_KeepJobFlowAliveWhenNoStep"> <summary> <para> <para>Specifies whether the cluster should remain available after completing all steps. Defaults to <c>false</c>. For more information about configuring cluster termination, see <a href="https://docs.aws.amazon.com/emr/latest/ManagementGuide/emr-plan-termination.html">Control Cluster Termination</a> in the <i>EMR Management Guide</i>.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.LogEncryptionKmsKeyId"> <summary> <para> <para>The KMS key used for encrypting log files. If a value is not provided, the logs remain encrypted by AES-256. This attribute is only available with Amazon EMR releases 5.30.0 and later, excluding Amazon EMR 6.0.0.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.LogUri"> <summary> <para> <para>The location in Amazon S3 to write the log files of the job flow. If a value is not provided, logs are not created.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.Instances_MasterInstanceType"> <summary> <para> <para>The Amazon EC2 instance type of the master node.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.ComputeLimits_MaximumCapacityUnit"> <summary> <para> <para> The upper boundary of Amazon EC2 units. It is measured through vCPU cores or instances for instance groups and measured through units for instance fleets. Managed scaling activities are not allowed beyond this boundary. The limit only applies to the core and task nodes. The master node cannot be scaled after initial configuration. </para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.ComputeLimits_MaximumCoreCapacityUnit"> <summary> <para> <para> The upper boundary of Amazon EC2 units for core node type in a cluster. It is measured through vCPU cores or instances for instance groups and measured through units for instance fleets. The core units are not allowed to scale beyond this boundary. The parameter is used to split capacity allocation between core and task nodes. </para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.ComputeLimits_MaximumOnDemandCapacityUnit"> <summary> <para> <para> The upper boundary of On-Demand Amazon EC2 units. It is measured through vCPU cores or instances for instance groups and measured through units for instance fleets. The On-Demand units are not allowed to scale beyond this boundary. The parameter is used to split capacity allocation between On-Demand and Spot Instances. </para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.ComputeLimits_MinimumCapacityUnit"> <summary> <para> <para> The lower boundary of Amazon EC2 units. It is measured through vCPU cores or instances for instance groups and measured through units for instance fleets. Managed scaling activities are not allowed beyond this boundary. The limit only applies to the core and task nodes. The master node cannot be scaled after initial configuration. </para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.Name"> <summary> <para> <para>The name of the job flow.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.NewSupportedProduct"> <summary> <para> <note><para>For Amazon EMR releases 3.x and 2.x. For Amazon EMR releases 4.x and later, use Applications.</para></note><para>A list of strings that indicates third-party software to use with the job flow that accepts a user argument list. Amazon EMR accepts and forwards the argument list to the corresponding installation script as bootstrap action arguments. For more information, see "Launch a Job Flow on the MapR Distribution for Hadoop" in the <a href="https://docs.aws.amazon.com/emr/latest/DeveloperGuide/emr-dg.pdf">Amazon EMR Developer Guide</a>. Supported values are:</para><ul><li><para>"mapr-m3" - launch the cluster using MapR M3 Edition.</para></li><li><para>"mapr-m5" - launch the cluster using MapR M5 Edition.</para></li><li><para>"mapr" with the user arguments specifying "--edition,m3" or "--edition,m5" - launch the job flow using MapR M3 or M5 Edition respectively.</para></li><li><para>"mapr-m7" - launch the cluster using MapR M7 Edition.</para></li><li><para>"hunk" - launch the cluster with the Hunk Big Data Analytics Platform.</para></li><li><para>"hue"- launch the cluster with Hue installed.</para></li><li><para>"spark" - launch the cluster with Apache Spark installed.</para></li><li><para>"ganglia" - launch the cluster with the Ganglia Monitoring System installed.</para></li></ul> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.OSReleaseLabel"> <summary> <para> <para>Specifies a particular Amazon Linux release for all nodes in a cluster launch RunJobFlow request. If a release is not specified, Amazon EMR uses the latest validated Amazon Linux release for cluster launch.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.PlacementGroupConfig"> <summary> <para> <para>The specified placement group configuration for an Amazon EMR cluster.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.KerberosAttributes_Realm"> <summary> <para> <para>The name of the Kerberos realm to which all nodes in a cluster belong. For example, <c>EC2.INTERNAL</c>. </para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.ReleaseLabel"> <summary> <para> <para>The Amazon EMR release label, which determines the version of open-source application packages installed on the cluster. Release labels are in the form <c>emr-x.x.x</c>, where x.x.x is an Amazon EMR release version such as <c>emr-5.14.0</c>. For more information about Amazon EMR release versions and included application versions and features, see <a href="https://docs.aws.amazon.com/emr/latest/ReleaseGuide/">https://docs.aws.amazon.com/emr/latest/ReleaseGuide/</a>. The release label applies only to Amazon EMR releases version 4.0 and later. Earlier versions use <c>AmiVersion</c>.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.RepoUpgradeOnBoot"> <summary> <para> <para>Applies only when <c>CustomAmiID</c> is used. Specifies which updates from the Amazon Linux AMI package repositories to apply automatically when the instance boots using the AMI. If omitted, the default is <c>SECURITY</c>, which indicates that only security updates are applied. If <c>NONE</c> is specified, no updates are applied, and all updates must be applied manually.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.ScaleDownBehavior"> <summary> <para> <para>Specifies the way that individual Amazon EC2 instances terminate when an automatic scale-in activity occurs or an instance group is resized. <c>TERMINATE_AT_INSTANCE_HOUR</c> indicates that Amazon EMR terminates nodes at the instance-hour boundary, regardless of when the request to terminate the instance was submitted. This option is only available with Amazon EMR 5.1.0 and later and is the default for clusters created using that version. <c>TERMINATE_AT_TASK_COMPLETION</c> indicates that Amazon EMR adds nodes to a deny list and drains tasks from nodes before terminating the Amazon EC2 instances, regardless of the instance-hour boundary. With either behavior, Amazon EMR removes the least active nodes first and blocks instance termination if it could lead to HDFS corruption. <c>TERMINATE_AT_TASK_COMPLETION</c> available only in Amazon EMR releases 4.1.0 and later, and is the default for releases of Amazon EMR earlier than 5.1.0.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.SecurityConfiguration"> <summary> <para> <para>The name of a security configuration to apply to the cluster.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.Instances_ServiceAccessSecurityGroup"> <summary> <para> <para>The identifier of the Amazon EC2 security group for the Amazon EMR service to access clusters in VPC private subnets.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.ServiceRole"> <summary> <para> <para>The IAM role that Amazon EMR assumes in order to access Amazon Web Services resources on your behalf. If you've created a custom service role path, you must specify it for the service role when you launch your cluster.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.Instances_SlaveInstanceType"> <summary> <para> <para>The Amazon EC2 instance type of the core and task nodes.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.StepConcurrencyLevel"> <summary> <para> <para>Specifies the number of steps that can be executed concurrently. The default value is <c>1</c>. The maximum value is <c>256</c>.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.Step"> <summary> <para> <para>A list of steps to run.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.SupportedProduct"> <summary> <para> <note><para>For Amazon EMR releases 3.x and 2.x. For Amazon EMR releases 4.x and later, use Applications.</para></note><para>A list of strings that indicates third-party software to use. For more information, see the <a href="https://docs.aws.amazon.com/emr/latest/DeveloperGuide/emr-dg.pdf">Amazon EMR Developer Guide</a>. Currently supported values are:</para><ul><li><para>"mapr-m3" - launch the job flow using MapR M3 Edition.</para></li><li><para>"mapr-m5" - launch the job flow using MapR M5 Edition.</para></li></ul> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.Tag"> <summary> <para> <para>A list of tags to associate with a cluster and propagate to Amazon EC2 instances.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.Instances_TerminationProtected"> <summary> <para> <para>Specifies whether to lock the cluster to prevent the Amazon EC2 instances from being terminated by API call, user intervention, or in the event of a job-flow error.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.Instances_UnhealthyNodeReplacement"> <summary> <para> <para>Indicates whether Amazon EMR should gracefully replace core nodes that have degraded within the cluster.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.ComputeLimits_UnitType"> <summary> <para> <para> The unit type used for specifying a managed scaling policy. </para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.VisibleToAllUser"> <summary> <para> <important><para>The VisibleToAllUsers parameter is no longer supported. By default, the value is set to <c>true</c>. Setting it to <c>false</c> now has no effect.</para></important><para>Set this value to <c>true</c> so that IAM principals in the Amazon Web Services account associated with the cluster can perform Amazon EMR actions on the cluster that their IAM policies allow. This value defaults to <c>true</c> for clusters created using the Amazon EMR API or the CLI <a href="https://docs.aws.amazon.com/cli/latest/reference/emr/create-cluster.html">create-cluster</a> command.</para><para>When set to <c>false</c>, only the IAM principal that created the cluster and the Amazon Web Services account root user can perform Amazon EMR actions for the cluster, regardless of the IAM permissions policies attached to other IAM principals. For more information, see <a href="https://docs.aws.amazon.com/emr/latest/ManagementGuide/security_IAM_emr-with-IAM.html#security_set_visible_to_all_users">Understanding the Amazon EMR cluster VisibleToAllUsers setting</a> in the <i>Amazon EMR Management Guide</i>.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'JobFlowId'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.RunJobFlowResponse). Specifying the name of a property of type Amazon.ElasticMapReduce.Model.RunJobFlowResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the Name parameter. The -PassThru parameter is deprecated, use -Select '^Name' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.EMR.StartEMRNotebookExecutionCmdlet"> <summary> Starts a notebook execution. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRNotebookExecutionCmdlet.NotebookS3Location_Bucket"> <summary> <para> <para>The Amazon S3 bucket that stores the notebook execution input.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRNotebookExecutionCmdlet.OutputNotebookS3Location_Bucket"> <summary> <para> <para>The Amazon S3 bucket that stores the notebook execution output.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRNotebookExecutionCmdlet.EditorId"> <summary> <para> <para>The unique identifier of the Amazon EMR Notebook to use for notebook execution.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRNotebookExecutionCmdlet.EnvironmentVariable"> <summary> <para> <para>The environment variables associated with the notebook execution.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRNotebookExecutionCmdlet.ExecutionEngine_ExecutionRoleArn"> <summary> <para> <para>The execution role ARN required for the notebook execution.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRNotebookExecutionCmdlet.ExecutionEngine_Id"> <summary> <para> <para>The unique identifier of the execution engine. For an Amazon EMR cluster, this is the cluster ID.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRNotebookExecutionCmdlet.NotebookS3Location_Key"> <summary> <para> <para>The key to the Amazon S3 location that stores the notebook execution input.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRNotebookExecutionCmdlet.OutputNotebookS3Location_Key"> <summary> <para> <para>The key to the Amazon S3 location that stores the notebook execution output.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRNotebookExecutionCmdlet.ExecutionEngine_MasterInstanceSecurityGroupId"> <summary> <para> <para>An optional unique ID of an Amazon EC2 security group to associate with the master instance of the Amazon EMR cluster for this notebook execution. For more information see <a href="https://docs.aws.amazon.com/emr/latest/ManagementGuide/emr-managed-notebooks-security-groups.html">Specifying Amazon EC2 Security Groups for Amazon EMR Notebooks</a> in the <i>EMR Management Guide</i>.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRNotebookExecutionCmdlet.NotebookExecutionName"> <summary> <para> <para>An optional name for the notebook execution.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRNotebookExecutionCmdlet.NotebookInstanceSecurityGroupId"> <summary> <para> <para>The unique identifier of the Amazon EC2 security group to associate with the Amazon EMR Notebook for this notebook execution.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRNotebookExecutionCmdlet.NotebookParam"> <summary> <para> <para>Input parameters in JSON format passed to the Amazon EMR Notebook at runtime for execution.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRNotebookExecutionCmdlet.OutputNotebookFormat"> <summary> <para> <para>The output format for the notebook execution.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRNotebookExecutionCmdlet.RelativePath"> <summary> <para> <para>The path and file name of the notebook file for this execution, relative to the path specified for the Amazon EMR Notebook. For example, if you specify a path of <c>s3://MyBucket/MyNotebooks</c> when you create an Amazon EMR Notebook for a notebook with an ID of <c>e-ABCDEFGHIJK1234567890ABCD</c> (the <c>EditorID</c> of this request), and you specify a <c>RelativePath</c> of <c>my_notebook_executions/notebook_execution.ipynb</c>, the location of the file for the notebook execution is <c>s3://MyBucket/MyNotebooks/e-ABCDEFGHIJK1234567890ABCD/my_notebook_executions/notebook_execution.ipynb</c>.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRNotebookExecutionCmdlet.ServiceRole"> <summary> <para> <para>The name or ARN of the IAM role that is used as the service role for Amazon EMR (the Amazon EMR role) for the notebook execution.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRNotebookExecutionCmdlet.Tag"> <summary> <para> <para>A list of tags associated with a notebook execution. Tags are user-defined key-value pairs that consist of a required key string with a maximum of 128 characters and an optional value string with a maximum of 256 characters.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRNotebookExecutionCmdlet.ExecutionEngine_Type"> <summary> <para> <para>The type of execution engine. A value of <c>EMR</c> specifies an Amazon EMR cluster.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRNotebookExecutionCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'NotebookExecutionId'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.StartNotebookExecutionResponse). Specifying the name of a property of type Amazon.ElasticMapReduce.Model.StartNotebookExecutionResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRNotebookExecutionCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.EMR.StopEMRJobFlowCmdlet"> <summary> TerminateJobFlows shuts a list of clusters (job flows) down. When a job flow is shut down, any step not yet completed is canceled and the Amazon EC2 instances on which the cluster is running are stopped. Any log files not already saved are uploaded to Amazon S3 if a LogUri was specified when the cluster was created. <para> The maximum number of clusters allowed is 10. The call to <c>TerminateJobFlows</c> is asynchronous. Depending on the configuration of the cluster, it may take up to 1-5 minutes for the cluster to completely terminate and release allocated resources, such as Amazon EC2 instances. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.StopEMRJobFlowCmdlet.JobFlowId"> <summary> <para> <para>A list of job flows to be shut down.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.StopEMRJobFlowCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.TerminateJobFlowsResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.StopEMRJobFlowCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the JobFlowId parameter. The -PassThru parameter is deprecated, use -Select '^JobFlowId' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.StopEMRJobFlowCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.EMR.StopEMRNotebookExecutionCmdlet"> <summary> Stops a notebook execution. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.StopEMRNotebookExecutionCmdlet.NotebookExecutionId"> <summary> <para> <para>The unique identifier of the notebook execution.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.StopEMRNotebookExecutionCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.StopNotebookExecutionResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.StopEMRNotebookExecutionCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the NotebookExecutionId parameter. The -PassThru parameter is deprecated, use -Select '^NotebookExecutionId' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.StopEMRNotebookExecutionCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.EMR.StopEMRStepCmdlet"> <summary> Cancels a pending step or steps in a running cluster. Available only in Amazon EMR versions 4.8.0 and later, excluding version 5.0.0. A maximum of 256 steps are allowed in each CancelSteps request. CancelSteps is idempotent but asynchronous; it does not guarantee that a step will be canceled, even if the request is successfully submitted. When you use Amazon EMR releases 5.28.0 and later, you can cancel steps that are in a <c>PENDING</c> or <c>RUNNING</c> state. In earlier versions of Amazon EMR, you can only cancel steps that are in a <c>PENDING</c> state. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.StopEMRStepCmdlet.ClusterId"> <summary> <para> <para>The <c>ClusterID</c> for the specified steps that will be canceled. Use <a>RunJobFlow</a> and <a>ListClusters</a> to get ClusterIDs. </para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.StopEMRStepCmdlet.StepCancellationOption"> <summary> <para> <para>The option to choose to cancel <c>RUNNING</c> steps. By default, the value is <c>SEND_INTERRUPT</c>.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.StopEMRStepCmdlet.StepId"> <summary> <para> <para>The list of <c>StepIDs</c> to cancel. Use <a>ListSteps</a> to get steps and their states for the specified cluster.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.StopEMRStepCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'CancelStepsInfoList'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.CancelStepsResponse). Specifying the name of a property of type Amazon.ElasticMapReduce.Model.CancelStepsResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.StopEMRStepCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the ClusterId parameter. The -PassThru parameter is deprecated, use -Select '^ClusterId' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.StopEMRStepCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.EMR.UpdateEMRStudioCmdlet"> <summary> Updates an Amazon EMR Studio configuration, including attributes such as name, description, and subnets. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.UpdateEMRStudioCmdlet.DefaultS3Location"> <summary> <para> <para>The Amazon S3 location to back up Workspaces and notebook files for the Amazon EMR Studio.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.UpdateEMRStudioCmdlet.Description"> <summary> <para> <para>A detailed description to assign to the Amazon EMR Studio.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.UpdateEMRStudioCmdlet.EncryptionKeyArn"> <summary> <para> <para>The KMS key identifier (ARN) used to encrypt Amazon EMR Studio workspace and notebook files when backed up to Amazon S3.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.UpdateEMRStudioCmdlet.Name"> <summary> <para> <para>A descriptive name for the Amazon EMR Studio.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.UpdateEMRStudioCmdlet.StudioId"> <summary> <para> <para>The ID of the Amazon EMR Studio to update.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.UpdateEMRStudioCmdlet.SubnetId"> <summary> <para> <para>A list of subnet IDs to associate with the Amazon EMR Studio. The list can include new subnet IDs, but must also include all of the subnet IDs previously associated with the Studio. The list order does not matter. A Studio can have a maximum of 5 subnets. The subnets must belong to the same VPC as the Studio. </para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.UpdateEMRStudioCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.UpdateStudioResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.UpdateEMRStudioCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the StudioId parameter. The -PassThru parameter is deprecated, use -Select '^StudioId' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.UpdateEMRStudioCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.EMR.UpdateEMRStudioSessionMappingCmdlet"> <summary> Updates the session policy attached to the user or group for the specified Amazon EMR Studio. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.UpdateEMRStudioSessionMappingCmdlet.IdentityId"> <summary> <para> <para>The globally unique identifier (GUID) of the user or group. For more information, see <a href="https://docs.aws.amazon.com/singlesignon/latest/IdentityStoreAPIReference/API_User.html#singlesignon-Type-User-UserId">UserId</a> and <a href="https://docs.aws.amazon.com/singlesignon/latest/IdentityStoreAPIReference/API_Group.html#singlesignon-Type-Group-GroupId">GroupId</a> in the <i>IAM Identity Center Identity Store API Reference</i>. Either <c>IdentityName</c> or <c>IdentityId</c> must be specified.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.UpdateEMRStudioSessionMappingCmdlet.IdentityName"> <summary> <para> <para>The name of the user or group to update. For more information, see <a href="https://docs.aws.amazon.com/singlesignon/latest/IdentityStoreAPIReference/API_User.html#singlesignon-Type-User-UserName">UserName</a> and <a href="https://docs.aws.amazon.com/singlesignon/latest/IdentityStoreAPIReference/API_Group.html#singlesignon-Type-Group-DisplayName">DisplayName</a> in the <i>IAM Identity Center Identity Store API Reference</i>. Either <c>IdentityName</c> or <c>IdentityId</c> must be specified.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.UpdateEMRStudioSessionMappingCmdlet.IdentityType"> <summary> <para> <para>Specifies whether the identity to update is a user or a group.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.UpdateEMRStudioSessionMappingCmdlet.SessionPolicyArn"> <summary> <para> <para>The Amazon Resource Name (ARN) of the session policy to associate with the specified user or group.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.UpdateEMRStudioSessionMappingCmdlet.StudioId"> <summary> <para> <para>The ID of the Amazon EMR Studio.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.UpdateEMRStudioSessionMappingCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.UpdateStudioSessionMappingResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.UpdateEMRStudioSessionMappingCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.EMR.WriteEMRAutoScalingPolicyCmdlet"> <summary> Creates or updates an automatic scaling policy for a core instance group or task instance group in an Amazon EMR cluster. The automatic scaling policy defines how an instance group dynamically adds and terminates Amazon EC2 instances in response to the value of a CloudWatch metric. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.WriteEMRAutoScalingPolicyCmdlet.ClusterId"> <summary> <para> <para>Specifies the ID of a cluster. The instance group to which the automatic scaling policy is applied is within this cluster.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.WriteEMRAutoScalingPolicyCmdlet.InstanceGroupId"> <summary> <para> <para>Specifies the ID of the instance group to which the automatic scaling policy is applied.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.WriteEMRAutoScalingPolicyCmdlet.Constraints_MaxCapacity"> <summary> <para> <para>The upper boundary of Amazon EC2 instances in an instance group beyond which scaling activities are not allowed to grow. Scale-out activities will not add instances beyond this boundary.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.WriteEMRAutoScalingPolicyCmdlet.Constraints_MinCapacity"> <summary> <para> <para>The lower boundary of Amazon EC2 instances in an instance group below which scaling activities are not allowed to shrink. Scale-in activities will not terminate instances below this boundary.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.WriteEMRAutoScalingPolicyCmdlet.AutoScalingPolicy_Rule"> <summary> <para> <para>The scale-in and scale-out rules that comprise the automatic scaling policy.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.WriteEMRAutoScalingPolicyCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is '*'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.PutAutoScalingPolicyResponse). Specifying the name of a property of type Amazon.ElasticMapReduce.Model.PutAutoScalingPolicyResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.WriteEMRAutoScalingPolicyCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the ClusterId parameter. The -PassThru parameter is deprecated, use -Select '^ClusterId' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.WriteEMRAutoScalingPolicyCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.EMR.WriteEMRAutoTerminationPolicyCmdlet"> <summary> <note><para> Auto-termination is supported in Amazon EMR releases 5.30.0 and 6.1.0 and later. For more information, see <a href="https://docs.aws.amazon.com/emr/latest/ManagementGuide/emr-auto-termination-policy.html">Using an auto-termination policy</a>. </para></note><para> Creates or updates an auto-termination policy for an Amazon EMR cluster. An auto-termination policy defines the amount of idle time in seconds after which a cluster automatically terminates. For alternative cluster termination options, see <a href="https://docs.aws.amazon.com/emr/latest/ManagementGuide/emr-plan-termination.html">Control cluster termination</a>. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.WriteEMRAutoTerminationPolicyCmdlet.ClusterId"> <summary> <para> <para>Specifies the ID of the Amazon EMR cluster to which the auto-termination policy will be attached.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.WriteEMRAutoTerminationPolicyCmdlet.AutoTerminationPolicy_IdleTimeout"> <summary> <para> <para>Specifies the amount of idle time in seconds after which the cluster automatically terminates. You can specify a minimum of 60 seconds and a maximum of 604800 seconds (seven days).</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.WriteEMRAutoTerminationPolicyCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.PutAutoTerminationPolicyResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.WriteEMRAutoTerminationPolicyCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the ClusterId parameter. The -PassThru parameter is deprecated, use -Select '^ClusterId' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.WriteEMRAutoTerminationPolicyCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.EMR.WriteEMRBlockPublicAccessConfigurationCmdlet"> <summary> Creates or updates an Amazon EMR block public access configuration for your Amazon Web Services account in the current Region. For more information see <a href="https://docs.aws.amazon.com/emr/latest/ManagementGuide/configure-block-public-access.html">Configure Block Public Access for Amazon EMR</a> in the <i>Amazon EMR Management Guide</i>. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.WriteEMRBlockPublicAccessConfigurationCmdlet.BlockPublicAccessConfiguration_BlockPublicSecurityGroupRule"> <summary> <para> <para>Indicates whether Amazon EMR block public access is enabled (<c>true</c>) or disabled (<c>false</c>). By default, the value is <c>false</c> for accounts that have created Amazon EMR clusters before July 2019. For accounts created after this, the default is <c>true</c>.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.WriteEMRBlockPublicAccessConfigurationCmdlet.BlockPublicAccessConfiguration_PermittedPublicSecurityGroupRuleRange"> <summary> <para> <para>Specifies ports and port ranges that are permitted to have security group rules that allow inbound traffic from all public sources. For example, if Port 23 (Telnet) is specified for <c>PermittedPublicSecurityGroupRuleRanges</c>, Amazon EMR allows cluster creation if a security group associated with the cluster has a rule that allows inbound traffic on Port 23 from IPv4 0.0.0.0/0 or IPv6 port ::/0 as the source.</para><para>By default, Port 22, which is used for SSH access to the cluster Amazon EC2 instances, is in the list of <c>PermittedPublicSecurityGroupRuleRanges</c>.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.WriteEMRBlockPublicAccessConfigurationCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.PutBlockPublicAccessConfigurationResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.WriteEMRBlockPublicAccessConfigurationCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.EMR.WriteEMRManagedScalingPolicyCmdlet"> <summary> Creates or updates a managed scaling policy for an Amazon EMR cluster. The managed scaling policy defines the limits for resources, such as Amazon EC2 instances that can be added or terminated from a cluster. The policy only applies to the core and task nodes. The master node cannot be scaled after initial configuration. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.WriteEMRManagedScalingPolicyCmdlet.ClusterId"> <summary> <para> <para>Specifies the ID of an Amazon EMR cluster where the managed scaling policy is attached. </para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.WriteEMRManagedScalingPolicyCmdlet.ComputeLimits_MaximumCapacityUnit"> <summary> <para> <para> The upper boundary of Amazon EC2 units. It is measured through vCPU cores or instances for instance groups and measured through units for instance fleets. Managed scaling activities are not allowed beyond this boundary. The limit only applies to the core and task nodes. The master node cannot be scaled after initial configuration. </para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.WriteEMRManagedScalingPolicyCmdlet.ComputeLimits_MaximumCoreCapacityUnit"> <summary> <para> <para> The upper boundary of Amazon EC2 units for core node type in a cluster. It is measured through vCPU cores or instances for instance groups and measured through units for instance fleets. The core units are not allowed to scale beyond this boundary. The parameter is used to split capacity allocation between core and task nodes. </para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.WriteEMRManagedScalingPolicyCmdlet.ComputeLimits_MaximumOnDemandCapacityUnit"> <summary> <para> <para> The upper boundary of On-Demand Amazon EC2 units. It is measured through vCPU cores or instances for instance groups and measured through units for instance fleets. The On-Demand units are not allowed to scale beyond this boundary. The parameter is used to split capacity allocation between On-Demand and Spot Instances. </para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.WriteEMRManagedScalingPolicyCmdlet.ComputeLimits_MinimumCapacityUnit"> <summary> <para> <para> The lower boundary of Amazon EC2 units. It is measured through vCPU cores or instances for instance groups and measured through units for instance fleets. Managed scaling activities are not allowed beyond this boundary. The limit only applies to the core and task nodes. The master node cannot be scaled after initial configuration. </para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.WriteEMRManagedScalingPolicyCmdlet.ComputeLimits_UnitType"> <summary> <para> <para> The unit type used for specifying a managed scaling policy. </para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.WriteEMRManagedScalingPolicyCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.PutManagedScalingPolicyResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.WriteEMRManagedScalingPolicyCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the ClusterId parameter. The -PassThru parameter is deprecated, use -Select '^ClusterId' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMR.WriteEMRManagedScalingPolicyCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> </members> </doc> |