AWS.Tools.EMRServerless.XML
|
<?xml version="1.0"?>
<doc> <assembly> <name>AWS.Tools.EMRServerless</name> </assembly> <members> <member name="T:Amazon.PowerShell.Cmdlets.EMRServerless.AddEMRServerlessResourceTagCmdlet"> <summary> Assigns tags to resources. A tag is a label that you assign to an Amazon Web Services resource. Each tag consists of a key and an optional value, both of which you define. Tags enable you to categorize your Amazon Web Services resources by attributes such as purpose, owner, or environment. When you have many resources of the same type, you can quickly identify a specific resource based on the tags you've assigned to it. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.AddEMRServerlessResourceTagCmdlet.ResourceArn"> <summary> <para> <para>The Amazon Resource Name (ARN) that identifies the resource to list the tags for. Currently, the supported resources are Amazon EMR Serverless applications and job runs.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.AddEMRServerlessResourceTagCmdlet.Tag"> <summary> <para> <para>The tags to add to the resource. A tag is an array of key-value pairs.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.AddEMRServerlessResourceTagCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.EMRServerless.Model.TagResourceResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.AddEMRServerlessResourceTagCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.EMRServerless.GetEMRServerlessApplicationCmdlet"> <summary> Displays detailed information about a specified application. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.GetEMRServerlessApplicationCmdlet.ApplicationId"> <summary> <para> <para>The ID of the application that will be described.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.GetEMRServerlessApplicationCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'Application'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.EMRServerless.Model.GetApplicationResponse). Specifying the name of a property of type Amazon.EMRServerless.Model.GetApplicationResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.EMRServerless.GetEMRServerlessApplicationListCmdlet"> <summary> Lists applications based on a set of parameters. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.GetEMRServerlessApplicationListCmdlet.State"> <summary> <para> <para>An optional filter for application states. Note that if this filter contains multiple states, the resulting list will be grouped by the state.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.GetEMRServerlessApplicationListCmdlet.MaxResult"> <summary> <para> <para>The maximum number of applications that can be listed.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.GetEMRServerlessApplicationListCmdlet.NextToken"> <summary> <para> <para>The token for the next set of application results.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.GetEMRServerlessApplicationListCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'Applications'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.EMRServerless.Model.ListApplicationsResponse). Specifying the name of a property of type Amazon.EMRServerless.Model.ListApplicationsResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.EMRServerless.GetEMRServerlessDashboardForJobRunCmdlet"> <summary> Creates and returns a URL that you can use to access the application UIs for a job run. <para> For jobs in a running state, the application UI is a live user interface such as the Spark or Tez web UI. For completed jobs, the application UI is a persistent application user interface such as the Spark History Server or persistent Tez UI. </para><note><para> The URL is valid for one hour after you generate it. To access the application UI after that hour elapses, you must invoke the API again to generate a new URL. </para></note> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.GetEMRServerlessDashboardForJobRunCmdlet.ApplicationId"> <summary> <para> <para>The ID of the application.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.GetEMRServerlessDashboardForJobRunCmdlet.Attempt"> <summary> <para> <para>An optimal parameter that indicates the amount of attempts for the job. If not specified, this value defaults to the attempt of the latest job.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.GetEMRServerlessDashboardForJobRunCmdlet.JobRunId"> <summary> <para> <para>The ID of the job run.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.GetEMRServerlessDashboardForJobRunCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'Url'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.EMRServerless.Model.GetDashboardForJobRunResponse). Specifying the name of a property of type Amazon.EMRServerless.Model.GetDashboardForJobRunResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.EMRServerless.GetEMRServerlessJobRunCmdlet"> <summary> Displays detailed information about a job run. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.GetEMRServerlessJobRunCmdlet.ApplicationId"> <summary> <para> <para>The ID of the application on which the job run is submitted.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.GetEMRServerlessJobRunCmdlet.Attempt"> <summary> <para> <para>An optimal parameter that indicates the amount of attempts for the job. If not specified, this value defaults to the attempt of the latest job.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.GetEMRServerlessJobRunCmdlet.JobRunId"> <summary> <para> <para>The ID of the job run.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.GetEMRServerlessJobRunCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'JobRun'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.EMRServerless.Model.GetJobRunResponse). Specifying the name of a property of type Amazon.EMRServerless.Model.GetJobRunResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.EMRServerless.GetEMRServerlessJobRunAttemptListCmdlet"> <summary> Lists all attempt of a job run. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.GetEMRServerlessJobRunAttemptListCmdlet.ApplicationId"> <summary> <para> <para>The ID of the application for which to list job runs.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.GetEMRServerlessJobRunAttemptListCmdlet.JobRunId"> <summary> <para> <para>The ID of the job run to list.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.GetEMRServerlessJobRunAttemptListCmdlet.MaxResult"> <summary> <para> <para>The maximum number of job run attempts to list.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.GetEMRServerlessJobRunAttemptListCmdlet.NextToken"> <summary> <para> <para>The token for the next set of job run attempt results.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.GetEMRServerlessJobRunAttemptListCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'JobRunAttempts'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.EMRServerless.Model.ListJobRunAttemptsResponse). Specifying the name of a property of type Amazon.EMRServerless.Model.ListJobRunAttemptsResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.EMRServerless.GetEMRServerlessJobRunListCmdlet"> <summary> Lists job runs based on a set of parameters. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.GetEMRServerlessJobRunListCmdlet.ApplicationId"> <summary> <para> <para>The ID of the application for which to list the job run.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.GetEMRServerlessJobRunListCmdlet.CreatedAtAfter"> <summary> <para> <para>The lower bound of the option to filter by creation date and time.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.GetEMRServerlessJobRunListCmdlet.CreatedAtBefore"> <summary> <para> <para>The upper bound of the option to filter by creation date and time.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.GetEMRServerlessJobRunListCmdlet.Mode"> <summary> <para> <para>The mode of the job runs to list.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.GetEMRServerlessJobRunListCmdlet.State"> <summary> <para> <para>An optional filter for job run states. Note that if this filter contains multiple states, the resulting list will be grouped by the state.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.GetEMRServerlessJobRunListCmdlet.MaxResult"> <summary> <para> <para>The maximum number of job runs that can be listed.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.GetEMRServerlessJobRunListCmdlet.NextToken"> <summary> <para> <para>The token for the next set of job run results.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.GetEMRServerlessJobRunListCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'JobRuns'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.EMRServerless.Model.ListJobRunsResponse). Specifying the name of a property of type Amazon.EMRServerless.Model.ListJobRunsResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.EMRServerless.GetEMRServerlessResourceTagListCmdlet"> <summary> Lists the tags assigned to the resources. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.GetEMRServerlessResourceTagListCmdlet.ResourceArn"> <summary> <para> <para>The Amazon Resource Name (ARN) that identifies the resource to list the tags for. Currently, the supported resources are Amazon EMR Serverless applications and job runs.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.GetEMRServerlessResourceTagListCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'Tags'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.EMRServerless.Model.ListTagsForResourceResponse). Specifying the name of a property of type Amazon.EMRServerless.Model.ListTagsForResourceResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.EMRServerless.NewEMRServerlessApplicationCmdlet"> <summary> Creates an application. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.NewEMRServerlessApplicationCmdlet.Architecture"> <summary> <para> <para>The CPU architecture of an application.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.NewEMRServerlessApplicationCmdlet.MaximumCapacity_Cpu"> <summary> <para> <para>The maximum allowed CPU for an application.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.NewEMRServerlessApplicationCmdlet.MaximumCapacity_Disk"> <summary> <para> <para>The maximum allowed disk for an application.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.NewEMRServerlessApplicationCmdlet.AutoStartConfiguration_Enabled"> <summary> <para> <para>Enables the application to automatically start on job submission. Defaults to true.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.NewEMRServerlessApplicationCmdlet.AutoStopConfiguration_Enabled"> <summary> <para> <para>Enables the application to automatically stop after a certain amount of time being idle. Defaults to true.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.NewEMRServerlessApplicationCmdlet.CloudWatchLoggingConfiguration_Enabled"> <summary> <para> <para>Enables CloudWatch logging.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.NewEMRServerlessApplicationCmdlet.ManagedPersistenceMonitoringConfiguration_Enabled"> <summary> <para> <para>Enables managed logging and defaults to true. If set to false, managed logging will be turned off.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.NewEMRServerlessApplicationCmdlet.CloudWatchLoggingConfiguration_EncryptionKeyArn"> <summary> <para> <para>The Key Management Service (KMS) key ARN to encrypt the logs that you store in CloudWatch Logs.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.NewEMRServerlessApplicationCmdlet.ManagedPersistenceMonitoringConfiguration_EncryptionKeyArn"> <summary> <para> <para>The KMS key ARN to encrypt the logs stored in managed log persistence.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.NewEMRServerlessApplicationCmdlet.S3MonitoringConfiguration_EncryptionKeyArn"> <summary> <para> <para>The KMS key ARN to encrypt the logs published to the given Amazon S3 destination.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.NewEMRServerlessApplicationCmdlet.AutoStopConfiguration_IdleTimeoutMinute"> <summary> <para> <para>The amount of idle time in minutes after which your application will automatically stop. Defaults to 15 minutes.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.NewEMRServerlessApplicationCmdlet.ImageConfiguration_ImageUri"> <summary> <para> <para>The URI of an image in the Amazon ECR registry. This field is required when you create a new application. If you leave this field blank in an update, Amazon EMR will remove the image configuration.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.NewEMRServerlessApplicationCmdlet.InitialCapacity"> <summary> <para> <para>The capacity to initialize when the application is created.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.NewEMRServerlessApplicationCmdlet.InteractiveConfiguration_LivyEndpointEnabled"> <summary> <para> <para>Enables an Apache Livy endpoint that you can connect to and run interactive jobs.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.NewEMRServerlessApplicationCmdlet.CloudWatchLoggingConfiguration_LogGroupName"> <summary> <para> <para>The name of the log group in Amazon CloudWatch Logs where you want to publish your logs.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.NewEMRServerlessApplicationCmdlet.CloudWatchLoggingConfiguration_LogStreamNamePrefix"> <summary> <para> <para>Prefix for the CloudWatch log stream name.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.NewEMRServerlessApplicationCmdlet.CloudWatchLoggingConfiguration_LogType"> <summary> <para> <para>The types of logs that you want to publish to CloudWatch. If you don't specify any log types, driver STDOUT and STDERR logs will be published to CloudWatch Logs by default. For more information including the supported worker types for Hive and Spark, see <a href="https://docs.aws.amazon.com/emr/latest/EMR-Serverless-UserGuide/logging.html#jobs-log-storage-cw">Logging for EMR Serverless with CloudWatch</a>.</para><ul><li><para><b>Key Valid Values</b>: <c>SPARK_DRIVER</c>, <c>SPARK_EXECUTOR</c>, <c>HIVE_DRIVER</c>, <c>TEZ_TASK</c></para></li><li><para><b>Array Members Valid Values</b>: <c>STDOUT</c>, <c>STDERR</c>, <c>HIVE_LOG</c>, <c>TEZ_AM</c>, <c>SYSTEM_LOGS</c></para></li></ul> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.NewEMRServerlessApplicationCmdlet.S3MonitoringConfiguration_LogUri"> <summary> <para> <para>The Amazon S3 destination URI for log publishing.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.NewEMRServerlessApplicationCmdlet.SchedulerConfiguration_MaxConcurrentRun"> <summary> <para> <para>The maximum concurrent job runs on this application. If scheduler configuration is enabled on your application, the default value is 15. The valid range is 1 to 1000.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.NewEMRServerlessApplicationCmdlet.MaximumCapacity_Memory"> <summary> <para> <para>The maximum allowed resources for an application.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.NewEMRServerlessApplicationCmdlet.Name"> <summary> <para> <para>The name of the application.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.NewEMRServerlessApplicationCmdlet.SchedulerConfiguration_QueueTimeoutMinute"> <summary> <para> <para>The maximum duration in minutes for the job in QUEUED state. If scheduler configuration is enabled on your application, the default value is 360 minutes (6 hours). The valid range is from 15 to 720.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.NewEMRServerlessApplicationCmdlet.ReleaseLabel"> <summary> <para> <para>The Amazon EMR release associated with the application.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.NewEMRServerlessApplicationCmdlet.PrometheusMonitoringConfiguration_RemoteWriteUrl"> <summary> <para> <para>The remote write URL in the Amazon Managed Service for Prometheus workspace to send metrics to.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.NewEMRServerlessApplicationCmdlet.RuntimeConfiguration"> <summary> <para> <para>The <a href="https://docs.aws.amazon.com/emr-serverless/latest/APIReference/API_Configuration.html">Configuration</a> specifications to use when creating an application. Each configuration consists of a classification and properties. This configuration is applied to all the job runs submitted under the application.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.NewEMRServerlessApplicationCmdlet.NetworkConfiguration_SecurityGroupId"> <summary> <para> <para>The array of security group Ids for customer VPC connectivity.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.NewEMRServerlessApplicationCmdlet.InteractiveConfiguration_StudioEnabled"> <summary> <para> <para>Enables you to connect an application to Amazon EMR Studio to run interactive workloads in a notebook.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.NewEMRServerlessApplicationCmdlet.NetworkConfiguration_SubnetId"> <summary> <para> <para>The array of subnet Ids for customer VPC connectivity.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.NewEMRServerlessApplicationCmdlet.Tag"> <summary> <para> <para>The tags assigned to the application.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.NewEMRServerlessApplicationCmdlet.Type"> <summary> <para> <para>The type of application you want to start, such as Spark or Hive.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.NewEMRServerlessApplicationCmdlet.WorkerTypeSpecification"> <summary> <para> <para>The key-value pairs that specify worker type to <c>WorkerTypeSpecificationInput</c>. This parameter must contain all valid worker types for a Spark or Hive application. Valid worker types include <c>Driver</c> and <c>Executor</c> for Spark applications and <c>HiveDriver</c> and <c>TezTask</c> for Hive applications. You can either set image details in this parameter for each worker type, or in <c>imageConfiguration</c> for all worker types.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.NewEMRServerlessApplicationCmdlet.ClientToken"> <summary> <para> <para>The client idempotency token of the application to create. Its value must be unique for each request.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.NewEMRServerlessApplicationCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is '*'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.EMRServerless.Model.CreateApplicationResponse). Specifying the name of a property of type Amazon.EMRServerless.Model.CreateApplicationResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.NewEMRServerlessApplicationCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.EMRServerless.RemoveEMRServerlessApplicationCmdlet"> <summary> Deletes an application. An application has to be in a stopped or created state in order to be deleted. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.RemoveEMRServerlessApplicationCmdlet.ApplicationId"> <summary> <para> <para>The ID of the application that will be deleted.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.RemoveEMRServerlessApplicationCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.EMRServerless.Model.DeleteApplicationResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.RemoveEMRServerlessApplicationCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.EMRServerless.RemoveEMRServerlessResourceTagCmdlet"> <summary> Removes tags from resources. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.RemoveEMRServerlessResourceTagCmdlet.ResourceArn"> <summary> <para> <para>The Amazon Resource Name (ARN) that identifies the resource to list the tags for. Currently, the supported resources are Amazon EMR Serverless applications and job runs.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.RemoveEMRServerlessResourceTagCmdlet.TagKey"> <summary> <para> <para>The keys of the tags to be removed.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.RemoveEMRServerlessResourceTagCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.EMRServerless.Model.UntagResourceResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.RemoveEMRServerlessResourceTagCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.EMRServerless.StartEMRServerlessApplicationCmdlet"> <summary> Starts a specified application and initializes initial capacity if configured. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.StartEMRServerlessApplicationCmdlet.ApplicationId"> <summary> <para> <para>The ID of the application to start.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.StartEMRServerlessApplicationCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.EMRServerless.Model.StartApplicationResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.StartEMRServerlessApplicationCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.EMRServerless.StartEMRServerlessJobRunCmdlet"> <summary> Starts a job run. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.StartEMRServerlessJobRunCmdlet.ConfigurationOverrides_ApplicationConfiguration"> <summary> <para> <para>The override configurations for the application.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.StartEMRServerlessJobRunCmdlet.ApplicationId"> <summary> <para> <para>The ID of the application on which to run the job.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.StartEMRServerlessJobRunCmdlet.CloudWatchLoggingConfiguration_Enabled"> <summary> <para> <para>Enables CloudWatch logging.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.StartEMRServerlessJobRunCmdlet.ManagedPersistenceMonitoringConfiguration_Enabled"> <summary> <para> <para>Enables managed logging and defaults to true. If set to false, managed logging will be turned off.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.StartEMRServerlessJobRunCmdlet.CloudWatchLoggingConfiguration_EncryptionKeyArn"> <summary> <para> <para>The Key Management Service (KMS) key ARN to encrypt the logs that you store in CloudWatch Logs.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.StartEMRServerlessJobRunCmdlet.ManagedPersistenceMonitoringConfiguration_EncryptionKeyArn"> <summary> <para> <para>The KMS key ARN to encrypt the logs stored in managed log persistence.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.StartEMRServerlessJobRunCmdlet.S3MonitoringConfiguration_EncryptionKeyArn"> <summary> <para> <para>The KMS key ARN to encrypt the logs published to the given Amazon S3 destination.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.StartEMRServerlessJobRunCmdlet.SparkSubmit_EntryPoint"> <summary> <para> <para>The entry point for the Spark submit job run.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.StartEMRServerlessJobRunCmdlet.SparkSubmit_EntryPointArgument"> <summary> <para> <para>The arguments for the Spark submit job run.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.StartEMRServerlessJobRunCmdlet.ExecutionRoleArn"> <summary> <para> <para>The execution role ARN for the job run.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.StartEMRServerlessJobRunCmdlet.ExecutionTimeoutMinute"> <summary> <para> <para>The maximum duration for the job run to run. If the job run runs beyond this duration, it will be automatically cancelled.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.StartEMRServerlessJobRunCmdlet.Hive_InitQueryFile"> <summary> <para> <para>The query file for the Hive job run.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.StartEMRServerlessJobRunCmdlet.CloudWatchLoggingConfiguration_LogGroupName"> <summary> <para> <para>The name of the log group in Amazon CloudWatch Logs where you want to publish your logs.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.StartEMRServerlessJobRunCmdlet.CloudWatchLoggingConfiguration_LogStreamNamePrefix"> <summary> <para> <para>Prefix for the CloudWatch log stream name.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.StartEMRServerlessJobRunCmdlet.CloudWatchLoggingConfiguration_LogType"> <summary> <para> <para>The types of logs that you want to publish to CloudWatch. If you don't specify any log types, driver STDOUT and STDERR logs will be published to CloudWatch Logs by default. For more information including the supported worker types for Hive and Spark, see <a href="https://docs.aws.amazon.com/emr/latest/EMR-Serverless-UserGuide/logging.html#jobs-log-storage-cw">Logging for EMR Serverless with CloudWatch</a>.</para><ul><li><para><b>Key Valid Values</b>: <c>SPARK_DRIVER</c>, <c>SPARK_EXECUTOR</c>, <c>HIVE_DRIVER</c>, <c>TEZ_TASK</c></para></li><li><para><b>Array Members Valid Values</b>: <c>STDOUT</c>, <c>STDERR</c>, <c>HIVE_LOG</c>, <c>TEZ_AM</c>, <c>SYSTEM_LOGS</c></para></li></ul> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.StartEMRServerlessJobRunCmdlet.S3MonitoringConfiguration_LogUri"> <summary> <para> <para>The Amazon S3 destination URI for log publishing.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.StartEMRServerlessJobRunCmdlet.RetryPolicy_MaxAttempt"> <summary> <para> <para>Maximum number of attempts for the job run. This parameter is only applicable for <c>BATCH</c> mode.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.StartEMRServerlessJobRunCmdlet.RetryPolicy_MaxFailedAttemptsPerHour"> <summary> <para> <para>Maximum number of failed attempts per hour. This [arameter is only applicable for <c>STREAMING</c> mode.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.StartEMRServerlessJobRunCmdlet.Mode"> <summary> <para> <para>The mode of the job run when it starts.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.StartEMRServerlessJobRunCmdlet.Name"> <summary> <para> <para>The optional job run name. This doesn't have to be unique.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.StartEMRServerlessJobRunCmdlet.Hive_Parameter"> <summary> <para> <para>The parameters for the Hive job run.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.StartEMRServerlessJobRunCmdlet.Hive_Query"> <summary> <para> <para>The query for the Hive job run.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.StartEMRServerlessJobRunCmdlet.PrometheusMonitoringConfiguration_RemoteWriteUrl"> <summary> <para> <para>The remote write URL in the Amazon Managed Service for Prometheus workspace to send metrics to.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.StartEMRServerlessJobRunCmdlet.SparkSubmit_SparkSubmitParameter"> <summary> <para> <para>The parameters for the Spark submit job run.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.StartEMRServerlessJobRunCmdlet.Tag"> <summary> <para> <para>The tags assigned to the job run.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.StartEMRServerlessJobRunCmdlet.ClientToken"> <summary> <para> <para>The client idempotency token of the job run to start. Its value must be unique for each request.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.StartEMRServerlessJobRunCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is '*'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.EMRServerless.Model.StartJobRunResponse). Specifying the name of a property of type Amazon.EMRServerless.Model.StartJobRunResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.StartEMRServerlessJobRunCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.EMRServerless.StopEMRServerlessApplicationCmdlet"> <summary> Stops a specified application and releases initial capacity if configured. All scheduled and running jobs must be completed or cancelled before stopping an application. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.StopEMRServerlessApplicationCmdlet.ApplicationId"> <summary> <para> <para>The ID of the application to stop.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.StopEMRServerlessApplicationCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.EMRServerless.Model.StopApplicationResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.StopEMRServerlessApplicationCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.EMRServerless.StopEMRServerlessJobRunCmdlet"> <summary> Cancels a job run. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.StopEMRServerlessJobRunCmdlet.ApplicationId"> <summary> <para> <para>The ID of the application on which the job run will be canceled.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.StopEMRServerlessJobRunCmdlet.JobRunId"> <summary> <para> <para>The ID of the job run to cancel.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.StopEMRServerlessJobRunCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is '*'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.EMRServerless.Model.CancelJobRunResponse). Specifying the name of a property of type Amazon.EMRServerless.Model.CancelJobRunResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.StopEMRServerlessJobRunCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.EMRServerless.UpdateEMRServerlessApplicationCmdlet"> <summary> Updates a specified application. An application has to be in a stopped or created state in order to be updated. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.UpdateEMRServerlessApplicationCmdlet.ApplicationId"> <summary> <para> <para>The ID of the application to update.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.UpdateEMRServerlessApplicationCmdlet.Architecture"> <summary> <para> <para>The CPU architecture of an application.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.UpdateEMRServerlessApplicationCmdlet.MaximumCapacity_Cpu"> <summary> <para> <para>The maximum allowed CPU for an application.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.UpdateEMRServerlessApplicationCmdlet.MaximumCapacity_Disk"> <summary> <para> <para>The maximum allowed disk for an application.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.UpdateEMRServerlessApplicationCmdlet.AutoStartConfiguration_Enabled"> <summary> <para> <para>Enables the application to automatically start on job submission. Defaults to true.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.UpdateEMRServerlessApplicationCmdlet.AutoStopConfiguration_Enabled"> <summary> <para> <para>Enables the application to automatically stop after a certain amount of time being idle. Defaults to true.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.UpdateEMRServerlessApplicationCmdlet.CloudWatchLoggingConfiguration_Enabled"> <summary> <para> <para>Enables CloudWatch logging.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.UpdateEMRServerlessApplicationCmdlet.ManagedPersistenceMonitoringConfiguration_Enabled"> <summary> <para> <para>Enables managed logging and defaults to true. If set to false, managed logging will be turned off.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.UpdateEMRServerlessApplicationCmdlet.CloudWatchLoggingConfiguration_EncryptionKeyArn"> <summary> <para> <para>The Key Management Service (KMS) key ARN to encrypt the logs that you store in CloudWatch Logs.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.UpdateEMRServerlessApplicationCmdlet.ManagedPersistenceMonitoringConfiguration_EncryptionKeyArn"> <summary> <para> <para>The KMS key ARN to encrypt the logs stored in managed log persistence.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.UpdateEMRServerlessApplicationCmdlet.S3MonitoringConfiguration_EncryptionKeyArn"> <summary> <para> <para>The KMS key ARN to encrypt the logs published to the given Amazon S3 destination.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.UpdateEMRServerlessApplicationCmdlet.AutoStopConfiguration_IdleTimeoutMinute"> <summary> <para> <para>The amount of idle time in minutes after which your application will automatically stop. Defaults to 15 minutes.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.UpdateEMRServerlessApplicationCmdlet.ImageConfiguration_ImageUri"> <summary> <para> <para>The URI of an image in the Amazon ECR registry. This field is required when you create a new application. If you leave this field blank in an update, Amazon EMR will remove the image configuration.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.UpdateEMRServerlessApplicationCmdlet.InitialCapacity"> <summary> <para> <para>The capacity to initialize when the application is updated.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.UpdateEMRServerlessApplicationCmdlet.InteractiveConfiguration_LivyEndpointEnabled"> <summary> <para> <para>Enables an Apache Livy endpoint that you can connect to and run interactive jobs.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.UpdateEMRServerlessApplicationCmdlet.CloudWatchLoggingConfiguration_LogGroupName"> <summary> <para> <para>The name of the log group in Amazon CloudWatch Logs where you want to publish your logs.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.UpdateEMRServerlessApplicationCmdlet.CloudWatchLoggingConfiguration_LogStreamNamePrefix"> <summary> <para> <para>Prefix for the CloudWatch log stream name.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.UpdateEMRServerlessApplicationCmdlet.CloudWatchLoggingConfiguration_LogType"> <summary> <para> <para>The types of logs that you want to publish to CloudWatch. If you don't specify any log types, driver STDOUT and STDERR logs will be published to CloudWatch Logs by default. For more information including the supported worker types for Hive and Spark, see <a href="https://docs.aws.amazon.com/emr/latest/EMR-Serverless-UserGuide/logging.html#jobs-log-storage-cw">Logging for EMR Serverless with CloudWatch</a>.</para><ul><li><para><b>Key Valid Values</b>: <c>SPARK_DRIVER</c>, <c>SPARK_EXECUTOR</c>, <c>HIVE_DRIVER</c>, <c>TEZ_TASK</c></para></li><li><para><b>Array Members Valid Values</b>: <c>STDOUT</c>, <c>STDERR</c>, <c>HIVE_LOG</c>, <c>TEZ_AM</c>, <c>SYSTEM_LOGS</c></para></li></ul> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.UpdateEMRServerlessApplicationCmdlet.S3MonitoringConfiguration_LogUri"> <summary> <para> <para>The Amazon S3 destination URI for log publishing.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.UpdateEMRServerlessApplicationCmdlet.SchedulerConfiguration_MaxConcurrentRun"> <summary> <para> <para>The maximum concurrent job runs on this application. If scheduler configuration is enabled on your application, the default value is 15. The valid range is 1 to 1000.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.UpdateEMRServerlessApplicationCmdlet.MaximumCapacity_Memory"> <summary> <para> <para>The maximum allowed resources for an application.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.UpdateEMRServerlessApplicationCmdlet.SchedulerConfiguration_QueueTimeoutMinute"> <summary> <para> <para>The maximum duration in minutes for the job in QUEUED state. If scheduler configuration is enabled on your application, the default value is 360 minutes (6 hours). The valid range is from 15 to 720.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.UpdateEMRServerlessApplicationCmdlet.ReleaseLabel"> <summary> <para> <para>The Amazon EMR release label for the application. You can change the release label to use a different release of Amazon EMR.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.UpdateEMRServerlessApplicationCmdlet.PrometheusMonitoringConfiguration_RemoteWriteUrl"> <summary> <para> <para>The remote write URL in the Amazon Managed Service for Prometheus workspace to send metrics to.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.UpdateEMRServerlessApplicationCmdlet.RuntimeConfiguration"> <summary> <para> <para>The <a href="https://docs.aws.amazon.com/emr-serverless/latest/APIReference/API_Configuration.html">Configuration</a> specifications to use when updating an application. Each configuration consists of a classification and properties. This configuration is applied across all the job runs submitted under the application.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.UpdateEMRServerlessApplicationCmdlet.NetworkConfiguration_SecurityGroupId"> <summary> <para> <para>The array of security group Ids for customer VPC connectivity.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.UpdateEMRServerlessApplicationCmdlet.InteractiveConfiguration_StudioEnabled"> <summary> <para> <para>Enables you to connect an application to Amazon EMR Studio to run interactive workloads in a notebook.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.UpdateEMRServerlessApplicationCmdlet.NetworkConfiguration_SubnetId"> <summary> <para> <para>The array of subnet Ids for customer VPC connectivity.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.UpdateEMRServerlessApplicationCmdlet.WorkerTypeSpecification"> <summary> <para> <para>The key-value pairs that specify worker type to <c>WorkerTypeSpecificationInput</c>. This parameter must contain all valid worker types for a Spark or Hive application. Valid worker types include <c>Driver</c> and <c>Executor</c> for Spark applications and <c>HiveDriver</c> and <c>TezTask</c> for Hive applications. You can either set image details in this parameter for each worker type, or in <c>imageConfiguration</c> for all worker types.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.UpdateEMRServerlessApplicationCmdlet.ClientToken"> <summary> <para> <para>The client idempotency token of the application to update. Its value must be unique for each request.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.UpdateEMRServerlessApplicationCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'Application'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.EMRServerless.Model.UpdateApplicationResponse). Specifying the name of a property of type Amazon.EMRServerless.Model.UpdateApplicationResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EMRServerless.UpdateEMRServerlessApplicationCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> </members> </doc> |