AWS.Tools.DynamoDBv2.XML
|
<?xml version="1.0"?>
<doc> <assembly> <name>AWS.Tools.DynamoDBv2</name> </assembly> <members> <member name="T:Amazon.PowerShell.Cmdlets.DDB.AddDDBIndexSchemaCmdlet"> <summary> <para> Adds a new Amazon DynamoDB local or global secondary index schema property to the supplied object, or returns a new object initialized with the index schema. </para> <para> The default behavior of this cmdlet is to create a local secondary index. To specify that the index is global, use the -Global switch and also add the ReadCapacity and WriteCapacity parameters to indicate the required throughput for the index. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.AddDDBIndexSchemaCmdlet.Schema"> <summary> A previously constructed TableSchema object to which the new index schema element will be added. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.AddDDBIndexSchemaCmdlet.IndexName"> <summary> The name of the secondary index. Must be unique only for this table that will be created. If an index with the same name already exists on the pipelined object an error is thrown. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.AddDDBIndexSchemaCmdlet.RangeKeyName"> <summary> The name of the range key to add to the secondary index. This is a mandatory parameter for local indexes. Global indexes can be defined with either a range key or a hash key, either of which can be any attribute in the table. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.AddDDBIndexSchemaCmdlet.RangeKeyDataType"> <summary> The data type of the range key as specified by the Amazon DynamoDB api. This is a mandatory parameter for local indexes. Global indexes can be defined with either a range key or a hash key, either of which can be any attribute in the table. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.AddDDBIndexSchemaCmdlet.ProjectionType"> <summary> Specifies attributes that are copied (projected) from the table into the index. These are in addition to the primary key attributes and index key attributes, which are automatically projected. Valid values: KEYS_ONLY - Only the index and primary keys are projected into the index. INCLUDE - Only the specified table attributes are projected into the index. The list of projected attributes are specified with the -NonKeyAttribute parameter. ALL - All of the table attributes are projected into the index. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.AddDDBIndexSchemaCmdlet.NonKeyAttribute"> <summary> A collection of one or more non-key attribute names that are projected into the index. The total count of attributes specified in NonKeyAttributes, summed across all of the secondary indexes, must not exceed 20. If you project the same attribute into two different indexes, this counts as two distinct attributes when determining the total. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.AddDDBIndexSchemaCmdlet.Global"> <summary> If set, specifies that the index components described by the parameters should be added as a global secondary index entry. The ReadCapacity and WriteCapacity parameters are also required when defining a global index. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.AddDDBIndexSchemaCmdlet.HashKeyName"> <summary> The name of the hash key for the global secondary index. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.AddDDBIndexSchemaCmdlet.HashKeyDataType"> <summary> The data type of the hash key for the global index, as specified by the Amazon DynamoDB api. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.AddDDBIndexSchemaCmdlet.ReadCapacity"> <summary> The provisioned throughput setting for read operations on the secondary index if the index is global (the -Global switch is specified). Ignored for local secondary indexes (the default). </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.AddDDBIndexSchemaCmdlet.WriteCapacity"> <summary> The provisioned throughput setting for write operations on the secondary index if the index is global (the -Global switch is specified). Ignored for local secondary indexes (the default). </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.DDB.AddDDBKeySchemaCmdlet"> <summary> Adds a new Amazon DynamoDB KeySchemaElement instance to the supplied TableSchema object. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.AddDDBKeySchemaCmdlet.Schema"> <summary> A previously constructed object to which the new key schema element will be added to any attached KeySchema property collection. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.AddDDBKeySchemaCmdlet.KeyName"> <summary> The name of the key to be applied to the schema. If a key with the specified name already exists an error is thrown. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.AddDDBKeySchemaCmdlet.KeyType"> <summary> The key type. Valid values are "HASH" or "RANGE". If not specified, "HASH" is assumed. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.AddDDBKeySchemaCmdlet.KeyDataType"> <summary> <para> The data type of the key as specified by the Amazon DynamoDB api. If an attribute entry for the key already exists in the attribute definitions of the supplied schema object, this parameter can be omitted otherwise an attribute will be added and defined as the declared type. </para> <para> Valid values for data type: "S" string, "N" number or "B" binary. </para> </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.DDB.ConvertFromDDBItemCmdlet"> <summary> Converts a dictionary of DynamoDB attribute values to a dictionary of types commonly used in PowerShell. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.ConvertFromDDBItemCmdlet.InputObject"> <summary> <para> <para>A dictionary of DynamoDB attribute values to convert to a Hashtable of types commonly used in PowerShell. </para><para> The following DynamoDB attribute values will be converted to the following types:</para></para><ul> <li><para><code>S</code> will be converted to <code>String</code>.</para></li> <li><para><code>BOOL</code> will be converted to <code>Boolean</code>.</para></li> <li><para><code>N</code> will be converted to the type specified by the <code>NumericType</code> parameter.</para></li> <li><para><code>B</code> will be converted to <code>MemoryStream</code>.</para></li> <li><para><code>M</code> will be converted to <code>Hashtable</code>.</para></li> <li><para><code>SS</code> will be converted to <code>HashSet<String></code>.</para></li> <li><para><code>NS</code> will be converted to a HashSet of the type specified by the parameter <code>NumericType</code>.</para></li> <li><para><code>BS</code> will be converted to <code>HashSet<MemoryStream></code>.</para></li> <li><para><code>L</code> will be converted to <code>Array</code>.</para></li> </ul> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.ConvertFromDDBItemCmdlet.NumericType"> <summary> Specifies the type to which numeric values will be converted. This conversion is required because DynamoDB stores numeric values as strings. The default value for this parameter is <code>Double</code>. There is a risk for loss of precision when converting to <code>Single</code> or <code>Double</code> because these types do not support up to 38 digits of precision as DynamoDB numeric values do. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.DDB.ConvertToDDBItemCmdlet"> <summary> Converts a dictionary of types commonly used in PowerShell to a dictionary of DynamoDB attribute values. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.ConvertToDDBItemCmdlet.InputObject"> <summary> <para> <para>A dictionary of commonly used PowerShell types to convert to a dictionary of DynamoDB attribute values. </para><para> The following types will be converted to the following DynamoDB attribute values:</para></para><ul> <li><para><code>String</code> will be converted to <code>S</code></para></li> <li><para><code>Boolean</code> will be converted to <code>BOOL</code></para></li> <li><para>Any numeric type will be converted to <code>N</code></para></li> <li><para><code>MemoryStream</code> will be converted to <code>B</code></para></li> <li><para><code>Hashtable</code> will be converted to <code>M</code></para></li> <li><para><code>HashSet<String></code> will be converted to <code>SS</code></para></li> <li><para>Any numeric HashSet will be converted to <code>NS</code></para></li> <li><para><code>HashSet<MemoryStream></code> will be converted to <code>BS</code></para></li> <li><para><code>Array</code> will be converted to <code>L</code></para></li> <li><para><code>ArrayList</code> will be converted to <code>L</code></para></li> <li><para>A generic list of any supported type above will be converted to <code>L</code></para></li> </ul> </summary> </member> <member name="M:Amazon.PowerShell.Cmdlets.DDB.DDBSchemaCmdletHelper.TableSchemaFromParameter(System.Object)"> <summary> Returns the schema object to manipulate. </summary> <param name="inputObjectParameter"> The pipeline object supplied as the value of the -Schema parameter or piped into cmdlet. </param> <returns> The supplied object as TableSchema. </returns> </member> <member name="T:Amazon.PowerShell.Cmdlets.DDB.NewDDBTableCmdlet"> <summary> <para>The <i>CreateTable</i> operation adds a new table to your account. In an AWS account, table names must be unique within each region. That is, you can have two tables with same name if you create the tables in different regions.</para><para><i>CreateTable</i> is an asynchronous operation. Upon receiving a <i>CreateTable</i> request, Amazon DynamoDB immediately returns a response with a <i>TableStatus</i> of <c>CREATING</c> . After the table is created, Amazon DynamoDB sets the <i>TableStatus</i> to <c>ACTIVE</c> . You can perform read and write operations only on an <c>ACTIVE</c> table. </para><para>If you want to create multiple tables with local secondary indexes on them, you must create them sequentially. Only one table with local secondary indexes can be in the <c>CREATING</c> state at any given time.</para><para>You can use the <i>DescribeTable</i> API to check the table status.</para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.NewDDBTableCmdlet.TableName"> <summary> <para> The name of the table to create. </para> <para> <b>Constraints:</b><list type="definition"><item><term>Length</term><description>3 - 255</description></item><item><term>Pattern</term><description>[a-zA-Z0-9_.-]+</description></item></list> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.NewDDBTableCmdlet.Schema"> <summary> TableSchema object containing the attribute and key schema information for the new table using the Write-DDBKeySchema and Write-DDBIndexSchema cmdlets. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.NewDDBTableCmdlet.ReadCapacity"> <summary> <para> The maximum number of strongly consistent reads consumed per second before Amazon DynamoDB returns a <i>ThrottlingException</i>. For more information, see <a href="http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/WorkingWithDDTables.html#ProvisionedThroughput">Specifying Read and Write Requirements</a> in the <i>Amazon DynamoDB Developer Guide</i>. </para> <para> <b>Constraints:</b><list type="definition"><item><term>Range</term><description>1 - </description></item></list> </para> <para> The settings can be modified using the <i>Update-DDBTable</i> cmdlet. For current minimum and maximum provisioned throughput values, see Limits in the <i>Amazon DynamoDB Developer Guide</i>. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.NewDDBTableCmdlet.WriteCapacity"> <summary> <para> The maximum number of strongly consistent writes consumed per second before Amazon DynamoDB returns a <i>ThrottlingException</i>. For more information, see <a href="http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/WorkingWithDDTables.html#ProvisionedThroughput">Specifying Read and Write Requirements</a> in the <i>Amazon DynamoDB Developer Guide</i>. </para> <para> <b>Constraints:</b><list type="definition"><item><term>Range</term><description>1 - </description></item></list> </para> <para> The settings can be modified using the <i>Update-DDBTable</i> cmdlet. For current minimum and maximum provisioned throughput values, see Limits in the <i>Amazon DynamoDB Developer Guide</i>. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.NewDDBTableCmdlet.BillingMode"> <summary> <para> <para>Controls how you are charged for read and write throughput and how you manage capacity. This setting can be changed later.</para><ul><li><para><code>PROVISIONED</code> - We recommend using <code>PROVISIONED</code> for predictable workloads. <code>PROVISIONED</code> sets the billing mode to <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/HowItWorks.ReadWriteCapacityMode.html#HowItWorks.ProvisionedThroughput.Manual">Provisioned Mode</a>.</para></li><li><para><code>PAY_PER_REQUEST</code> - We recommend using <code>PAY_PER_REQUEST</code> for unpredictable workloads. <code>PAY_PER_REQUEST</code> sets the billing mode to <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/HowItWorks.ReadWriteCapacityMode.html#HowItWorks.OnDemand">On-Demand Mode</a>. </para></li></ul> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.NewDDBTableCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.NewDDBTableCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'TableDescription'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DynamoDBv2.Model.CreateTableResponse). Specifying the name of a property of type Amazon.DynamoDBv2.Model.CreateTableResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.DDB.NewDDBTableSchemaCmdlet"> <summary> Returns a new TableSchema object for constructing an Amazon DynamoDB key schema for use with New-DDBTable. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.DDB.AddDDBResourceTagCmdlet"> <summary> Associate a set of tags with an Amazon DynamoDB resource. You can then activate these user-defined tags so that they appear on the Billing and Cost Management console for cost allocation tracking. You can call TagResource up to five times per second, per account. <ul><li><para><c>TagResource</c> is an asynchronous operation. If you issue a <a>ListTagsOfResource</a> request immediately after a <c>TagResource</c> request, DynamoDB might return your previous tag set, if there was one, or an empty tag set. This is because <c>ListTagsOfResource</c> uses an eventually consistent query, and the metadata for your tags or table might not be available at that moment. Wait for a few seconds, and then try the <c>ListTagsOfResource</c> request again. </para></li><li><para> The application or removal of tags using <c>TagResource</c> and <c>UntagResource</c> APIs is eventually consistent. <c>ListTagsOfResource</c> API will only reflect the changes after a few seconds. </para></li></ul><para> For an overview on tagging DynamoDB resources, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Tagging.html">Tagging for DynamoDB</a> in the <i>Amazon DynamoDB Developer Guide</i>. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.AddDDBResourceTagCmdlet.ResourceArn"> <summary> <para> <para>Identifies the Amazon DynamoDB resource to which tags should be added. This value is an Amazon Resource Name (ARN).</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.AddDDBResourceTagCmdlet.Tag"> <summary> <para> <para>The tags to be assigned to the Amazon DynamoDB resource.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.AddDDBResourceTagCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DynamoDBv2.Model.TagResourceResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.AddDDBResourceTagCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the ResourceArn parameter. The -PassThru parameter is deprecated, use -Select '^ResourceArn' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.AddDDBResourceTagCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.DDB.DisableDDBKinesisStreamingDestinationCmdlet"> <summary> Stops replication from the DynamoDB table to the Kinesis data stream. This is done without deleting either of the resources. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.DisableDDBKinesisStreamingDestinationCmdlet.EnableKinesisStreamingConfiguration_ApproximateCreationDateTimePrecision"> <summary> <para> <para>Toggle for the precision of Kinesis data stream timestamp. The values are either <c>MILLISECOND</c> or <c>MICROSECOND</c>.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.DisableDDBKinesisStreamingDestinationCmdlet.StreamArn"> <summary> <para> <para>The ARN for a Kinesis data stream.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.DisableDDBKinesisStreamingDestinationCmdlet.TableName"> <summary> <para> <para>The name of the DynamoDB table. You can also provide the Amazon Resource Name (ARN) of the table in this parameter.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.DisableDDBKinesisStreamingDestinationCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is '*'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DynamoDBv2.Model.DisableKinesisStreamingDestinationResponse). Specifying the name of a property of type Amazon.DynamoDBv2.Model.DisableKinesisStreamingDestinationResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.DisableDDBKinesisStreamingDestinationCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the TableName parameter. The -PassThru parameter is deprecated, use -Select '^TableName' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.DisableDDBKinesisStreamingDestinationCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.DDB.EnableDDBKinesisStreamingDestinationCmdlet"> <summary> Starts table data replication to the specified Kinesis data stream at a timestamp chosen during the enable workflow. If this operation doesn't return results immediately, use DescribeKinesisStreamingDestination to check if streaming to the Kinesis data stream is ACTIVE. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.EnableDDBKinesisStreamingDestinationCmdlet.EnableKinesisStreamingConfiguration_ApproximateCreationDateTimePrecision"> <summary> <para> <para>Toggle for the precision of Kinesis data stream timestamp. The values are either <c>MILLISECOND</c> or <c>MICROSECOND</c>.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.EnableDDBKinesisStreamingDestinationCmdlet.StreamArn"> <summary> <para> <para>The ARN for a Kinesis data stream.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.EnableDDBKinesisStreamingDestinationCmdlet.TableName"> <summary> <para> <para>The name of the DynamoDB table. You can also provide the Amazon Resource Name (ARN) of the table in this parameter.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.EnableDDBKinesisStreamingDestinationCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is '*'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DynamoDBv2.Model.EnableKinesisStreamingDestinationResponse). Specifying the name of a property of type Amazon.DynamoDBv2.Model.EnableKinesisStreamingDestinationResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.EnableDDBKinesisStreamingDestinationCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the TableName parameter. The -PassThru parameter is deprecated, use -Select '^TableName' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.EnableDDBKinesisStreamingDestinationCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.DDB.ExportDDBTableToPointInTimeCmdlet"> <summary> Exports table data to an S3 bucket. The table must have point in time recovery enabled, and you can export data from any time within the point in time recovery window. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.ExportDDBTableToPointInTimeCmdlet.ExportFormat"> <summary> <para> <para>The format for the exported data. Valid values for <c>ExportFormat</c> are <c>DYNAMODB_JSON</c> or <c>ION</c>.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.ExportDDBTableToPointInTimeCmdlet.IncrementalExportSpecification_ExportFromTime"> <summary> <para> <para>Time in the past which provides the inclusive start range for the export table's data, counted in seconds from the start of the Unix epoch. The incremental export will reflect the table's state including and after this point in time.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.ExportDDBTableToPointInTimeCmdlet.ExportTime"> <summary> <para> <para>Time in the past from which to export table data, counted in seconds from the start of the Unix epoch. The table export will be a snapshot of the table's state at this point in time.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.ExportDDBTableToPointInTimeCmdlet.IncrementalExportSpecification_ExportToTime"> <summary> <para> <para>Time in the past which provides the exclusive end range for the export table's data, counted in seconds from the start of the Unix epoch. The incremental export will reflect the table's state just prior to this point in time. If this is not provided, the latest time with data available will be used.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.ExportDDBTableToPointInTimeCmdlet.ExportType"> <summary> <para> <para>Choice of whether to execute as a full export or incremental export. Valid values are FULL_EXPORT or INCREMENTAL_EXPORT. The default value is FULL_EXPORT. If INCREMENTAL_EXPORT is provided, the IncrementalExportSpecification must also be used.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.ExportDDBTableToPointInTimeCmdlet.IncrementalExportSpecification_ExportViewType"> <summary> <para> <para>The view type that was chosen for the export. Valid values are <c>NEW_AND_OLD_IMAGES</c> and <c>NEW_IMAGES</c>. The default value is <c>NEW_AND_OLD_IMAGES</c>.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.ExportDDBTableToPointInTimeCmdlet.S3Bucket"> <summary> <para> <para>The name of the Amazon S3 bucket to export the snapshot to.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.ExportDDBTableToPointInTimeCmdlet.S3BucketOwner"> <summary> <para> <para>The ID of the Amazon Web Services account that owns the bucket the export will be stored in.</para><note><para>S3BucketOwner is a required parameter when exporting to a S3 bucket in another account.</para></note> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.ExportDDBTableToPointInTimeCmdlet.S3Prefix"> <summary> <para> <para>The Amazon S3 bucket prefix to use as the file name and path of the exported snapshot.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.ExportDDBTableToPointInTimeCmdlet.S3SseAlgorithm"> <summary> <para> <para>Type of encryption used on the bucket where export data will be stored. Valid values for <c>S3SseAlgorithm</c> are:</para><ul><li><para><c>AES256</c> - server-side encryption with Amazon S3 managed keys</para></li><li><para><c>KMS</c> - server-side encryption with KMS managed keys</para></li></ul> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.ExportDDBTableToPointInTimeCmdlet.S3SseKmsKeyId"> <summary> <para> <para>The ID of the KMS managed key used to encrypt the S3 bucket where export data will be stored (if applicable).</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.ExportDDBTableToPointInTimeCmdlet.TableArn"> <summary> <para> <para>The Amazon Resource Name (ARN) associated with the table to export.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.ExportDDBTableToPointInTimeCmdlet.ClientToken"> <summary> <para> <para>Providing a <c>ClientToken</c> makes the call to <c>ExportTableToPointInTimeInput</c> idempotent, meaning that multiple identical calls have the same effect as one single call.</para><para>A client token is valid for 8 hours after the first request that uses it is completed. After 8 hours, any request with the same client token is treated as a new request. Do not resubmit the same request with the same client token for more than 8 hours, or the result might not be idempotent.</para><para>If you submit a request with the same client token but a change in other parameters within the 8-hour idempotency window, DynamoDB returns an <c>ImportConflictException</c>.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.ExportDDBTableToPointInTimeCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'ExportDescription'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DynamoDBv2.Model.ExportTableToPointInTimeResponse). Specifying the name of a property of type Amazon.DynamoDBv2.Model.ExportTableToPointInTimeResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.ExportDDBTableToPointInTimeCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.DDB.GetDDBBackupCmdlet"> <summary> Describes an existing backup of a table. <para> You can call <c>DescribeBackup</c> at a maximum rate of 10 times per second. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.GetDDBBackupCmdlet.BackupArn"> <summary> <para> <para>The Amazon Resource Name (ARN) associated with the backup.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.GetDDBBackupCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'BackupDescription'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DynamoDBv2.Model.DescribeBackupResponse). Specifying the name of a property of type Amazon.DynamoDBv2.Model.DescribeBackupResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.GetDDBBackupCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the BackupArn parameter. The -PassThru parameter is deprecated, use -Select '^BackupArn' instead. This parameter will be removed in a future version. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.DDB.GetDDBBackupListCmdlet"> <summary> List DynamoDB backups that are associated with an Amazon Web Services account and weren't made with Amazon Web Services Backup. To list these backups for a given table, specify <c>TableName</c>. <c>ListBackups</c> returns a paginated list of results with at most 1 MB worth of items in a page. You can also specify a maximum number of entries to be returned in a page. <para> In the request, start time is inclusive, but end time is exclusive. Note that these boundaries are for the time at which the original backup was requested. </para><para> You can call <c>ListBackups</c> a maximum of five times per second. </para><para> If you want to retrieve the complete list of backups made with Amazon Web Services Backup, use the <a href="https://docs.aws.amazon.com/aws-backup/latest/devguide/API_ListBackupJobs.html">Amazon Web Services Backup list API.</a></para><br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.GetDDBBackupListCmdlet.BackupType"> <summary> <para> <para>The backups from the table specified by <c>BackupType</c> are listed.</para><para>Where <c>BackupType</c> can be:</para><ul><li><para><c>USER</c> - On-demand backup created by you. (The default setting if no other backup types are specified.)</para></li><li><para><c>SYSTEM</c> - On-demand backup automatically created by DynamoDB.</para></li><li><para><c>ALL</c> - All types of on-demand backups (USER and SYSTEM).</para></li></ul> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.GetDDBBackupListCmdlet.TableName"> <summary> <para> <para>Lists the backups from the table specified in <c>TableName</c>. You can also provide the Amazon Resource Name (ARN) of the table in this parameter.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.GetDDBBackupListCmdlet.TimeRangeLowerBound"> <summary> <para> <para>Only backups created after this time are listed. <c>TimeRangeLowerBound</c> is inclusive.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.GetDDBBackupListCmdlet.TimeRangeUpperBound"> <summary> <para> <para>Only backups created before this time are listed. <c>TimeRangeUpperBound</c> is exclusive. </para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.GetDDBBackupListCmdlet.ExclusiveStartBackupArn"> <summary> <para> <para><c>LastEvaluatedBackupArn</c> is the Amazon Resource Name (ARN) of the backup last evaluated when the current page of results was returned, inclusive of the current page of results. This value may be specified as the <c>ExclusiveStartBackupArn</c> of a new <c>ListBackups</c> operation in order to fetch the next page of results. </para> </para> <para> <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call. <br/>'ExclusiveStartBackupArn' is only returned by the cmdlet when '-Select *' is specified. In order to manually control output pagination, set '-ExclusiveStartBackupArn' to null for the first call then set the 'ExclusiveStartBackupArn' using the same property output from the previous call for subsequent calls. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.GetDDBBackupListCmdlet.Limit"> <summary> <para> <para>Maximum number of backups to return at once.</para> </para> <para> <br/><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet. <br/>In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call. <br/>Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.GetDDBBackupListCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'BackupSummaries'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DynamoDBv2.Model.ListBackupsResponse). Specifying the name of a property of type Amazon.DynamoDBv2.Model.ListBackupsResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.GetDDBBackupListCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the TableName parameter. The -PassThru parameter is deprecated, use -Select '^TableName' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.GetDDBBackupListCmdlet.NoAutoIteration"> <summary> By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of ExclusiveStartBackupArn as the start point. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.DDB.GetDDBBatchItemCmdlet"> <summary> The <c>BatchGetItem</c> operation returns the attributes of one or more items from one or more tables. You identify requested items by primary key. <para> A single operation can retrieve up to 16 MB of data, which can contain as many as 100 items. <c>BatchGetItem</c> returns a partial result if the response size limit is exceeded, the table's provisioned throughput is exceeded, more than 1MB per partition is requested, or an internal processing failure occurs. If a partial result is returned, the operation returns a value for <c>UnprocessedKeys</c>. You can use this value to retry the operation starting with the next item to get. </para><important><para> If you request more than 100 items, <c>BatchGetItem</c> returns a <c>ValidationException</c> with the message "Too many items requested for the BatchGetItem call." </para></important><para> For example, if you ask to retrieve 100 items, but each individual item is 300 KB in size, the system returns 52 items (so as not to exceed the 16 MB limit). It also returns an appropriate <c>UnprocessedKeys</c> value so you can get the next page of results. If desired, your application can include its own logic to assemble the pages of results into one dataset. </para><para> If <i>none</i> of the items can be processed due to insufficient provisioned throughput on all of the tables in the request, then <c>BatchGetItem</c> returns a <c>ProvisionedThroughputExceededException</c>. If <i>at least one</i> of the items is successfully processed, then <c>BatchGetItem</c> completes successfully, while returning the keys of the unread items in <c>UnprocessedKeys</c>. </para><important><para> If DynamoDB returns any unprocessed items, you should retry the batch operation on those items. However, <i>we strongly recommend that you use an exponential backoff algorithm</i>. If you retry the batch operation immediately, the underlying read or write requests can still fail due to throttling on the individual tables. If you delay the batch operation using exponential backoff, the individual requests in the batch are much more likely to succeed. </para><para> For more information, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/ErrorHandling.html#BatchOperations">Batch Operations and Error Handling</a> in the <i>Amazon DynamoDB Developer Guide</i>. </para></important><para> By default, <c>BatchGetItem</c> performs eventually consistent reads on every table in the request. If you want strongly consistent reads instead, you can set <c>ConsistentRead</c> to <c>true</c> for any or all tables. </para><para> In order to minimize response latency, <c>BatchGetItem</c> may retrieve items in parallel. </para><para> When designing your application, keep in mind that DynamoDB does not return items in any particular order. To help parse the response by item, include the primary key values for the items in your request in the <c>ProjectionExpression</c> parameter. </para><para> If a requested item does not exist, it is not returned in the result. Requests for nonexistent items consume the minimum read capacity units according to the type of read. For more information, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/WorkingWithTables.html#CapacityUnitCalculations">Working with Tables</a> in the <i>Amazon DynamoDB Developer Guide</i>. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.GetDDBBatchItemCmdlet.RequestItem"> <summary> <para> <para>A map of one or more table names or table ARNs and, for each table, a map that describes one or more items to retrieve from that table. Each table name or ARN can be used only once per <c>BatchGetItem</c> request.</para><para>Each element in the map of items to retrieve consists of the following:</para><ul><li><para><c>ConsistentRead</c> - If <c>true</c>, a strongly consistent read is used; if <c>false</c> (the default), an eventually consistent read is used.</para></li><li><para><c>ExpressionAttributeNames</c> - One or more substitution tokens for attribute names in the <c>ProjectionExpression</c> parameter. The following are some use cases for using <c>ExpressionAttributeNames</c>:</para><ul><li><para>To access an attribute whose name conflicts with a DynamoDB reserved word.</para></li><li><para>To create a placeholder for repeating occurrences of an attribute name in an expression.</para></li><li><para>To prevent special characters in an attribute name from being misinterpreted in an expression.</para></li></ul><para>Use the <b>#</b> character in an expression to dereference an attribute name. For example, consider the following attribute name:</para><ul><li><para><c>Percentile</c></para></li></ul><para>The name of this attribute conflicts with a reserved word, so it cannot be used directly in an expression. (For the complete list of reserved words, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/ReservedWords.html">Reserved Words</a> in the <i>Amazon DynamoDB Developer Guide</i>). To work around this, you could specify the following for <c>ExpressionAttributeNames</c>:</para><ul><li><para><c>{"#P":"Percentile"}</c></para></li></ul><para>You could then use this substitution in an expression, as in this example:</para><ul><li><para><c>#P = :val</c></para></li></ul><note><para>Tokens that begin with the <b>:</b> character are <i>expression attribute values</i>, which are placeholders for the actual value at runtime.</para></note><para>For more information about expression attribute names, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Expressions.AccessingItemAttributes.html">Accessing Item Attributes</a> in the <i>Amazon DynamoDB Developer Guide</i>.</para></li><li><para><c>Keys</c> - An array of primary key attribute values that define specific items in the table. For each primary key, you must provide <i>all</i> of the key attributes. For example, with a simple primary key, you only need to provide the partition key value. For a composite key, you must provide <i>both</i> the partition key value and the sort key value.</para></li><li><para><c>ProjectionExpression</c> - A string that identifies one or more attributes to retrieve from the table. These attributes can include scalars, sets, or elements of a JSON document. The attributes in the expression must be separated by commas.</para><para>If no attribute names are specified, then all attributes are returned. If any of the requested attributes are not found, they do not appear in the result.</para><para>For more information, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Expressions.AccessingItemAttributes.html">Accessing Item Attributes</a> in the <i>Amazon DynamoDB Developer Guide</i>.</para></li><li><para><c>AttributesToGet</c> - This is a legacy parameter. Use <c>ProjectionExpression</c> instead. For more information, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/LegacyConditionalParameters.AttributesToGet.html">AttributesToGet</a> in the <i>Amazon DynamoDB Developer Guide</i>. </para></li></ul> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.GetDDBBatchItemCmdlet.ReturnConsumedCapacity"> <summary> <para> The service has not provided documentation for this parameter; please refer to the service's API reference documentation for the latest available information. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.GetDDBBatchItemCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'Responses'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DynamoDBv2.Model.BatchGetItemResponse). Specifying the name of a property of type Amazon.DynamoDBv2.Model.BatchGetItemResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.GetDDBBatchItemCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the RequestItem parameter. The -PassThru parameter is deprecated, use -Select '^RequestItem' instead. This parameter will be removed in a future version. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.DDB.GetDDBContinuousBackupCmdlet"> <summary> Checks the status of continuous backups and point in time recovery on the specified table. Continuous backups are <c>ENABLED</c> on all tables at table creation. If point in time recovery is enabled, <c>PointInTimeRecoveryStatus</c> will be set to ENABLED. <para> After continuous backups and point in time recovery are enabled, you can restore to any point in time within <c>EarliestRestorableDateTime</c> and <c>LatestRestorableDateTime</c>. </para><para><c>LatestRestorableDateTime</c> is typically 5 minutes before the current time. You can restore your table to any point in time during the last 35 days. </para><para> You can call <c>DescribeContinuousBackups</c> at a maximum rate of 10 times per second. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.GetDDBContinuousBackupCmdlet.TableName"> <summary> <para> <para>Name of the table for which the customer wants to check the continuous backups and point in time recovery settings.</para><para>You can also provide the Amazon Resource Name (ARN) of the table in this parameter.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.GetDDBContinuousBackupCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'ContinuousBackupsDescription'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DynamoDBv2.Model.DescribeContinuousBackupsResponse). Specifying the name of a property of type Amazon.DynamoDBv2.Model.DescribeContinuousBackupsResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.GetDDBContinuousBackupCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the TableName parameter. The -PassThru parameter is deprecated, use -Select '^TableName' instead. This parameter will be removed in a future version. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.DDB.GetDDBContributorInsightCmdlet"> <summary> Returns information about contributor insights for a given table or global secondary index. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.GetDDBContributorInsightCmdlet.IndexName"> <summary> <para> <para>The name of the global secondary index to describe, if applicable.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.GetDDBContributorInsightCmdlet.TableName"> <summary> <para> <para>The name of the table to describe. You can also provide the Amazon Resource Name (ARN) of the table in this parameter.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.GetDDBContributorInsightCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is '*'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DynamoDBv2.Model.DescribeContributorInsightsResponse). Specifying the name of a property of type Amazon.DynamoDBv2.Model.DescribeContributorInsightsResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.GetDDBContributorInsightCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the TableName parameter. The -PassThru parameter is deprecated, use -Select '^TableName' instead. This parameter will be removed in a future version. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.DDB.GetDDBContributorInsightListCmdlet"> <summary> Returns a list of ContributorInsightsSummary for a table and all its global secondary indexes.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.GetDDBContributorInsightListCmdlet.TableName"> <summary> <para> <para>The name of the table. You can also provide the Amazon Resource Name (ARN) of the table in this parameter.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.GetDDBContributorInsightListCmdlet.MaxResult"> <summary> <para> <para>Maximum number of results to return per page.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.GetDDBContributorInsightListCmdlet.NextToken"> <summary> <para> <para>A token to for the desired page, if there is one.</para> </para> <para> <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call. <br/>'NextToken' is only returned by the cmdlet when '-Select *' is specified. In order to manually control output pagination, set '-NextToken' to null for the first call then set the 'NextToken' using the same property output from the previous call for subsequent calls. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.GetDDBContributorInsightListCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'ContributorInsightsSummaries'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DynamoDBv2.Model.ListContributorInsightsResponse). Specifying the name of a property of type Amazon.DynamoDBv2.Model.ListContributorInsightsResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.GetDDBContributorInsightListCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the TableName parameter. The -PassThru parameter is deprecated, use -Select '^TableName' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.GetDDBContributorInsightListCmdlet.NoAutoIteration"> <summary> By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken as the start point. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.DDB.GetDDBEndpointCmdlet"> <summary> Returns the regional endpoint information. For more information on policy permissions, please see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/inter-network-traffic-privacy.html#inter-network-traffic-DescribeEndpoints">Internetwork traffic privacy</a>. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.GetDDBEndpointCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'Endpoints'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DynamoDBv2.Model.DescribeEndpointsResponse). Specifying the name of a property of type Amazon.DynamoDBv2.Model.DescribeEndpointsResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.DDB.GetDDBExportCmdlet"> <summary> Describes an existing table export. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.GetDDBExportCmdlet.ExportArn"> <summary> <para> <para>The Amazon Resource Name (ARN) associated with the export.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.GetDDBExportCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'ExportDescription'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DynamoDBv2.Model.DescribeExportResponse). Specifying the name of a property of type Amazon.DynamoDBv2.Model.DescribeExportResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.GetDDBExportCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the ExportArn parameter. The -PassThru parameter is deprecated, use -Select '^ExportArn' instead. This parameter will be removed in a future version. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.DDB.GetDDBExportListCmdlet"> <summary> Lists completed exports within the past 90 days. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.GetDDBExportListCmdlet.TableArn"> <summary> <para> <para>The Amazon Resource Name (ARN) associated with the exported table.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.GetDDBExportListCmdlet.MaxResult"> <summary> <para> <para>Maximum number of results to return per page.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.GetDDBExportListCmdlet.NextToken"> <summary> <para> <para>An optional string that, if supplied, must be copied from the output of a previous call to <c>ListExports</c>. When provided in this manner, the API fetches the next page of results.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.GetDDBExportListCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'ExportSummaries'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DynamoDBv2.Model.ListExportsResponse). Specifying the name of a property of type Amazon.DynamoDBv2.Model.ListExportsResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.GetDDBExportListCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the TableArn parameter. The -PassThru parameter is deprecated, use -Select '^TableArn' instead. This parameter will be removed in a future version. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.DDB.GetDDBGlobalTableCmdlet"> <summary> Returns information about the specified global table. <important><para> This documentation is for version 2017.11.29 (Legacy) of global tables, which should be avoided for new global tables. Customers should use <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/GlobalTables.html">Global Tables version 2019.11.21 (Current)</a> when possible, because it provides greater flexibility, higher efficiency, and consumes less write capacity than 2017.11.29 (Legacy). </para><para> To determine which version you're using, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/globaltables.DetermineVersion.html">Determining the global table version you are using</a>. To update existing global tables from version 2017.11.29 (Legacy) to version 2019.11.21 (Current), see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/V2globaltables_upgrade.html">Upgrading global tables</a>. </para></important> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.GetDDBGlobalTableCmdlet.GlobalTableName"> <summary> <para> <para>The name of the global table.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.GetDDBGlobalTableCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'GlobalTableDescription'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DynamoDBv2.Model.DescribeGlobalTableResponse). Specifying the name of a property of type Amazon.DynamoDBv2.Model.DescribeGlobalTableResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.GetDDBGlobalTableCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the GlobalTableName parameter. The -PassThru parameter is deprecated, use -Select '^GlobalTableName' instead. This parameter will be removed in a future version. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.DDB.GetDDBGlobalTableListCmdlet"> <summary> Lists all global tables that have a replica in the specified Region. <important><para> This documentation is for version 2017.11.29 (Legacy) of global tables, which should be avoided for new global tables. Customers should use <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/GlobalTables.html">Global Tables version 2019.11.21 (Current)</a> when possible, because it provides greater flexibility, higher efficiency, and consumes less write capacity than 2017.11.29 (Legacy). </para><para> To determine which version you're using, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/globaltables.DetermineVersion.html">Determining the global table version you are using</a>. To update existing global tables from version 2017.11.29 (Legacy) to version 2019.11.21 (Current), see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/V2globaltables_upgrade.html">Upgrading global tables</a>. </para></important><br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.GetDDBGlobalTableListCmdlet.RegionName"> <summary> <para> <para>Lists the global tables in a specific Region.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.GetDDBGlobalTableListCmdlet.ExclusiveStartGlobalTableName"> <summary> <para> <para>The first global table name that this operation will evaluate.</para> </para> <para> <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call. <br/>'ExclusiveStartGlobalTableName' is only returned by the cmdlet when '-Select *' is specified. In order to manually control output pagination, set '-ExclusiveStartGlobalTableName' to null for the first call then set the 'ExclusiveStartGlobalTableName' using the same property output from the previous call for subsequent calls. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.GetDDBGlobalTableListCmdlet.Limit"> <summary> <para> <para>The maximum number of table names to return, if the parameter is not specified DynamoDB defaults to 100.</para><para>If the number of global tables DynamoDB finds reaches this limit, it stops the operation and returns the table names collected up to that point, with a table name in the <c>LastEvaluatedGlobalTableName</c> to apply in a subsequent operation to the <c>ExclusiveStartGlobalTableName</c> parameter.</para> </para> <para> <br/><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet. <br/>In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call. <br/>Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.GetDDBGlobalTableListCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'GlobalTables'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DynamoDBv2.Model.ListGlobalTablesResponse). Specifying the name of a property of type Amazon.DynamoDBv2.Model.ListGlobalTablesResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.GetDDBGlobalTableListCmdlet.NoAutoIteration"> <summary> By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of ExclusiveStartGlobalTableName as the start point. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.DDB.GetDDBGlobalTableSettingCmdlet"> <summary> Describes Region-specific settings for a global table. <important><para> This documentation is for version 2017.11.29 (Legacy) of global tables, which should be avoided for new global tables. Customers should use <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/GlobalTables.html">Global Tables version 2019.11.21 (Current)</a> when possible, because it provides greater flexibility, higher efficiency, and consumes less write capacity than 2017.11.29 (Legacy). </para><para> To determine which version you're using, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/globaltables.DetermineVersion.html">Determining the global table version you are using</a>. To update existing global tables from version 2017.11.29 (Legacy) to version 2019.11.21 (Current), see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/V2globaltables_upgrade.html">Upgrading global tables</a>. </para></important> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.GetDDBGlobalTableSettingCmdlet.GlobalTableName"> <summary> <para> <para>The name of the global table to describe.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.GetDDBGlobalTableSettingCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is '*'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DynamoDBv2.Model.DescribeGlobalTableSettingsResponse). Specifying the name of a property of type Amazon.DynamoDBv2.Model.DescribeGlobalTableSettingsResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.GetDDBGlobalTableSettingCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the GlobalTableName parameter. The -PassThru parameter is deprecated, use -Select '^GlobalTableName' instead. This parameter will be removed in a future version. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.DDB.GetDDBImportCmdlet"> <summary> Represents the properties of the import. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.GetDDBImportCmdlet.ImportArn"> <summary> <para> <para> The Amazon Resource Name (ARN) associated with the table you're importing to. </para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.GetDDBImportCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'ImportTableDescription'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DynamoDBv2.Model.DescribeImportResponse). Specifying the name of a property of type Amazon.DynamoDBv2.Model.DescribeImportResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.GetDDBImportCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the ImportArn parameter. The -PassThru parameter is deprecated, use -Select '^ImportArn' instead. This parameter will be removed in a future version. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.DDB.GetDDBImportListCmdlet"> <summary> Lists completed imports within the past 90 days. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.GetDDBImportListCmdlet.TableArn"> <summary> <para> <para> The Amazon Resource Name (ARN) associated with the table that was imported to. </para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.GetDDBImportListCmdlet.NextToken"> <summary> <para> <para> An optional string that, if supplied, must be copied from the output of a previous call to <c>ListImports</c>. When provided in this manner, the API fetches the next page of results. </para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.GetDDBImportListCmdlet.PageSize"> <summary> <para> <para> The number of <c>ImportSummary </c>objects returned in a single page. </para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.GetDDBImportListCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'ImportSummaryList'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DynamoDBv2.Model.ListImportsResponse). Specifying the name of a property of type Amazon.DynamoDBv2.Model.ListImportsResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.GetDDBImportListCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the TableArn parameter. The -PassThru parameter is deprecated, use -Select '^TableArn' instead. This parameter will be removed in a future version. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.DDB.GetDDBItemCmdlet"> <summary> The <c>GetItem</c> operation returns a set of attributes for the item with the given primary key. If there is no matching item, <c>GetItem</c> does not return any data and there will be no <c>Item</c> element in the response. <para><c>GetItem</c> provides an eventually consistent read by default. If your application requires a strongly consistent read, set <c>ConsistentRead</c> to <c>true</c>. Although a strongly consistent read might take more time than an eventually consistent read, it always returns the last updated value. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.GetDDBItemCmdlet.AttributesToGet"> <summary> <para> <para>This is a legacy parameter. Use <c>ProjectionExpression</c> instead. For more information, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/LegacyConditionalParameters.AttributesToGet.html">AttributesToGet</a> in the <i>Amazon DynamoDB Developer Guide</i>.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.GetDDBItemCmdlet.ConsistentRead"> <summary> <para> <para>Determines the read consistency model: If set to <c>true</c>, then the operation uses strongly consistent reads; otherwise, the operation uses eventually consistent reads.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.GetDDBItemCmdlet.ExpressionAttributeName"> <summary> <para> <para>One or more substitution tokens for attribute names in an expression. The following are some use cases for using <c>ExpressionAttributeNames</c>:</para><ul><li><para>To access an attribute whose name conflicts with a DynamoDB reserved word.</para></li><li><para>To create a placeholder for repeating occurrences of an attribute name in an expression.</para></li><li><para>To prevent special characters in an attribute name from being misinterpreted in an expression.</para></li></ul><para>Use the <b>#</b> character in an expression to dereference an attribute name. For example, consider the following attribute name:</para><ul><li><para><c>Percentile</c></para></li></ul><para>The name of this attribute conflicts with a reserved word, so it cannot be used directly in an expression. (For the complete list of reserved words, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/ReservedWords.html">Reserved Words</a> in the <i>Amazon DynamoDB Developer Guide</i>). To work around this, you could specify the following for <c>ExpressionAttributeNames</c>:</para><ul><li><para><c>{"#P":"Percentile"}</c></para></li></ul><para>You could then use this substitution in an expression, as in this example:</para><ul><li><para><c>#P = :val</c></para></li></ul><note><para>Tokens that begin with the <b>:</b> character are <i>expression attribute values</i>, which are placeholders for the actual value at runtime.</para></note><para>For more information on expression attribute names, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Expressions.AccessingItemAttributes.html">Specifying Item Attributes</a> in the <i>Amazon DynamoDB Developer Guide</i>.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.GetDDBItemCmdlet.Key"> <summary> <para> <para>A map of attribute names to <c>AttributeValue</c> objects, representing the primary key of the item to retrieve.</para><para>For the primary key, you must provide all of the attributes. For example, with a simple primary key, you only need to provide a value for the partition key. For a composite primary key, you must provide values for both the partition key and the sort key.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.GetDDBItemCmdlet.ProjectionExpression"> <summary> <para> <para>A string that identifies one or more attributes to retrieve from the table. These attributes can include scalars, sets, or elements of a JSON document. The attributes in the expression must be separated by commas.</para><para>If no attribute names are specified, then all attributes are returned. If any of the requested attributes are not found, they do not appear in the result.</para><para>For more information, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Expressions.AccessingItemAttributes.html">Specifying Item Attributes</a> in the <i>Amazon DynamoDB Developer Guide</i>.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.GetDDBItemCmdlet.ReturnConsumedCapacity"> <summary> <para> The service has not provided documentation for this parameter; please refer to the service's API reference documentation for the latest available information. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.GetDDBItemCmdlet.TableName"> <summary> <para> <para>The name of the table containing the requested item. You can also provide the Amazon Resource Name (ARN) of the table in this parameter.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.GetDDBItemCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'Item'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DynamoDBv2.Model.GetItemResponse). Specifying the name of a property of type Amazon.DynamoDBv2.Model.GetItemResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.GetDDBItemCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the Key parameter. The -PassThru parameter is deprecated, use -Select '^Key' instead. This parameter will be removed in a future version. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.DDB.GetDDBItemTransactionallyCmdlet"> <summary> <c>TransactGetItems</c> is a synchronous operation that atomically retrieves multiple items from one or more tables (but not from indexes) in a single account and Region. A <c>TransactGetItems</c> call can contain up to 100 <c>TransactGetItem</c> objects, each of which contains a <c>Get</c> structure that specifies an item to retrieve from a table in the account and Region. A call to <c>TransactGetItems</c> cannot retrieve items from tables in more than one Amazon Web Services account or Region. The aggregate size of the items in the transaction cannot exceed 4 MB. <para> DynamoDB rejects the entire <c>TransactGetItems</c> request if any of the following is true: </para><ul><li><para> A conflicting operation is in the process of updating an item to be read. </para></li><li><para> There is insufficient provisioned capacity for the transaction to be completed. </para></li><li><para> There is a user error, such as an invalid data format. </para></li><li><para> The aggregate size of the items in the transaction exceeded 4 MB. </para></li></ul> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.GetDDBItemTransactionallyCmdlet.ReturnConsumedCapacity"> <summary> <para> <para>A value of <c>TOTAL</c> causes consumed capacity information to be returned, and a value of <c>NONE</c> prevents that information from being returned. No other value is valid.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.GetDDBItemTransactionallyCmdlet.TransactItem"> <summary> <para> <para>An ordered array of up to 100 <c>TransactGetItem</c> objects, each of which contains a <c>Get</c> structure.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.GetDDBItemTransactionallyCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is '*'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DynamoDBv2.Model.TransactGetItemsResponse). Specifying the name of a property of type Amazon.DynamoDBv2.Model.TransactGetItemsResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.DDB.GetDDBKinesisStreamingDestinationCmdlet"> <summary> Returns information about the status of Kinesis streaming. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.GetDDBKinesisStreamingDestinationCmdlet.TableName"> <summary> <para> <para>The name of the table being described. You can also provide the Amazon Resource Name (ARN) of the table in this parameter.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.GetDDBKinesisStreamingDestinationCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is '*'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DynamoDBv2.Model.DescribeKinesisStreamingDestinationResponse). Specifying the name of a property of type Amazon.DynamoDBv2.Model.DescribeKinesisStreamingDestinationResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.GetDDBKinesisStreamingDestinationCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the TableName parameter. The -PassThru parameter is deprecated, use -Select '^TableName' instead. This parameter will be removed in a future version. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.DDB.GetDDBProvisionLimitCmdlet"> <summary> Returns the current provisioned-capacity quotas for your Amazon Web Services account in a Region, both for the Region as a whole and for any one DynamoDB table that you create there. <para> When you establish an Amazon Web Services account, the account has initial quotas on the maximum read capacity units and write capacity units that you can provision across all of your DynamoDB tables in a given Region. Also, there are per-table quotas that apply when you create a table there. For more information, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Limits.html">Service, Account, and Table Quotas</a> page in the <i>Amazon DynamoDB Developer Guide</i>. </para><para> Although you can increase these quotas by filing a case at <a href="https://console.aws.amazon.com/support/home#/">Amazon Web Services Support Center</a>, obtaining the increase is not instantaneous. The <c>DescribeLimits</c> action lets you write code to compare the capacity you are currently using to those quotas imposed by your account so that you have enough time to apply for an increase before you hit a quota. </para><para> For example, you could use one of the Amazon Web Services SDKs to do the following: </para><ol><li><para> Call <c>DescribeLimits</c> for a particular Region to obtain your current account quotas on provisioned capacity there. </para></li><li><para> Create a variable to hold the aggregate read capacity units provisioned for all your tables in that Region, and one to hold the aggregate write capacity units. Zero them both. </para></li><li><para> Call <c>ListTables</c> to obtain a list of all your DynamoDB tables. </para></li><li><para> For each table name listed by <c>ListTables</c>, do the following: </para><ul><li><para> Call <c>DescribeTable</c> with the table name. </para></li><li><para> Use the data returned by <c>DescribeTable</c> to add the read capacity units and write capacity units provisioned for the table itself to your variables. </para></li><li><para> If the table has one or more global secondary indexes (GSIs), loop over these GSIs and add their provisioned capacity values to your variables as well. </para></li></ul></li><li><para> Report the account quotas for that Region returned by <c>DescribeLimits</c>, along with the total current provisioned capacity levels you have calculated. </para></li></ol><para> This will let you see whether you are getting close to your account-level quotas. </para><para> The per-table quotas apply only when you are creating a new table. They restrict the sum of the provisioned capacity of the new table itself and all its global secondary indexes. </para><para> For existing tables and their GSIs, DynamoDB doesn't let you increase provisioned capacity extremely rapidly, but the only quota that applies is that the aggregate provisioned capacity over all your tables and GSIs cannot exceed either of the per-account quotas. </para><note><para><c>DescribeLimits</c> should only be called periodically. You can expect throttling errors if you call it more than once in a minute. </para></note><para> The <c>DescribeLimits</c> Request element has no content. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.GetDDBProvisionLimitCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is '*'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DynamoDBv2.Model.DescribeLimitsResponse). Specifying the name of a property of type Amazon.DynamoDBv2.Model.DescribeLimitsResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.DDB.GetDDBResourcePolicyCmdlet"> <summary> Returns the resource-based policy document attached to the resource, which can be a table or stream, in JSON format. <para><c>GetResourcePolicy</c> follows an <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/HowItWorks.ReadConsistency.html"><i>eventually consistent</i></a> model. The following list describes the outcomes when you issue the <c>GetResourcePolicy</c> request immediately after issuing another request: </para><ul><li><para> If you issue a <c>GetResourcePolicy</c> request immediately after a <c>PutResourcePolicy</c> request, DynamoDB might return a <c>PolicyNotFoundException</c>. </para></li><li><para> If you issue a <c>GetResourcePolicy</c>request immediately after a <c>DeleteResourcePolicy</c> request, DynamoDB might return the policy that was present before the deletion request. </para></li><li><para> If you issue a <c>GetResourcePolicy</c> request immediately after a <c>CreateTable</c> request, which includes a resource-based policy, DynamoDB might return a <c>ResourceNotFoundException</c> or a <c>PolicyNotFoundException</c>. </para></li></ul><para> Because <c>GetResourcePolicy</c> uses an <i>eventually consistent</i> query, the metadata for your policy or table might not be available at that moment. Wait for a few seconds, and then retry the <c>GetResourcePolicy</c> request. </para><para> After a <c>GetResourcePolicy</c> request returns a policy created using the <c>PutResourcePolicy</c> request, the policy will be applied in the authorization of requests to the resource. Because this process is eventually consistent, it will take some time to apply the policy to all requests to a resource. Policies that you attach while creating a table using the <c>CreateTable</c> request will always be applied to all requests for that table. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.GetDDBResourcePolicyCmdlet.ResourceArn"> <summary> <para> <para>The Amazon Resource Name (ARN) of the DynamoDB resource to which the policy is attached. The resources you can specify include tables and streams.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.GetDDBResourcePolicyCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is '*'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DynamoDBv2.Model.GetResourcePolicyResponse). Specifying the name of a property of type Amazon.DynamoDBv2.Model.GetResourcePolicyResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.GetDDBResourcePolicyCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the ResourceArn parameter. The -PassThru parameter is deprecated, use -Select '^ResourceArn' instead. This parameter will be removed in a future version. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.DDB.GetDDBResourceTagCmdlet"> <summary> List all tags on an Amazon DynamoDB resource. You can call ListTagsOfResource up to 10 times per second, per account. <para> For an overview on tagging DynamoDB resources, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Tagging.html">Tagging for DynamoDB</a> in the <i>Amazon DynamoDB Developer Guide</i>. </para><br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.GetDDBResourceTagCmdlet.ResourceArn"> <summary> <para> <para>The Amazon DynamoDB resource with tags to be listed. This value is an Amazon Resource Name (ARN).</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.GetDDBResourceTagCmdlet.NextToken"> <summary> <para> <para>An optional string that, if supplied, must be copied from the output of a previous call to ListTagOfResource. When provided in this manner, this API fetches the next page of results.</para> </para> <para> <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call. <br/>'NextToken' is only returned by the cmdlet when '-Select *' is specified. In order to manually control output pagination, set '-NextToken' to null for the first call then set the 'NextToken' using the same property output from the previous call for subsequent calls. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.GetDDBResourceTagCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'Tags'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DynamoDBv2.Model.ListTagsOfResourceResponse). Specifying the name of a property of type Amazon.DynamoDBv2.Model.ListTagsOfResourceResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.GetDDBResourceTagCmdlet.NoAutoIteration"> <summary> By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken as the start point. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.DDB.GetDDBStreamCmdlet"> <summary> Returns information about a stream, including the current status of the stream, its Amazon Resource Name (ARN), the composition of its shards, and its corresponding DynamoDB table. <note><para> You can call <c>DescribeStream</c> at a maximum rate of 10 times per second. </para></note><para> Each shard in the stream has a <c>SequenceNumberRange</c> associated with it. If the <c>SequenceNumberRange</c> has a <c>StartingSequenceNumber</c> but no <c>EndingSequenceNumber</c>, then the shard is still open (able to receive more stream records). If both <c>StartingSequenceNumber</c> and <c>EndingSequenceNumber</c> are present, then that shard is closed and can no longer receive more data. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.GetDDBStreamCmdlet.ExclusiveStartShardId"> <summary> <para> <para>The shard ID of the first item that this operation will evaluate. Use the value that was returned for <c>LastEvaluatedShardId</c> in the previous operation. </para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.GetDDBStreamCmdlet.StreamArn"> <summary> <para> <para>The Amazon Resource Name (ARN) for the stream.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.GetDDBStreamCmdlet.Limit"> <summary> <para> <para>The maximum number of shard objects to return. The upper limit is 100.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.GetDDBStreamCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'StreamDescription'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DynamoDBv2.Model.DescribeStreamResponse). Specifying the name of a property of type Amazon.DynamoDBv2.Model.DescribeStreamResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.GetDDBStreamCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the StreamArn parameter. The -PassThru parameter is deprecated, use -Select '^StreamArn' instead. This parameter will be removed in a future version. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.DDB.GetDDBStreamListCmdlet"> <summary> Returns an array of stream ARNs associated with the current account and endpoint. If the <c>TableName</c> parameter is present, then <c>ListStreams</c> will return only the streams ARNs for that table. <note><para> You can call <c>ListStreams</c> at a maximum rate of 5 times per second. </para></note> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.GetDDBStreamListCmdlet.ExclusiveStartStreamArn"> <summary> <para> <para>The ARN (Amazon Resource Name) of the first item that this operation will evaluate. Use the value that was returned for <c>LastEvaluatedStreamArn</c> in the previous operation. </para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.GetDDBStreamListCmdlet.TableName"> <summary> <para> <para>If this parameter is provided, then only the streams associated with this table name are returned.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.GetDDBStreamListCmdlet.Limit"> <summary> <para> <para>The maximum number of streams to return. The upper limit is 100.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.GetDDBStreamListCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is '*'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DynamoDBv2.Model.ListStreamsResponse). Specifying the name of a property of type Amazon.DynamoDBv2.Model.ListStreamsResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.GetDDBStreamListCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the TableName parameter. The -PassThru parameter is deprecated, use -Select '^TableName' instead. This parameter will be removed in a future version. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.DDB.GetDDBTableCmdlet"> <summary> Returns information about the table, including the current status of the table, when it was created, the primary key schema, and any indexes on the table. <important><para> For global tables, this operation only applies to global tables using Version 2019.11.21 (Current version). </para></important><note><para> If you issue a <c>DescribeTable</c> request immediately after a <c>CreateTable</c> request, DynamoDB might return a <c>ResourceNotFoundException</c>. This is because <c>DescribeTable</c> uses an eventually consistent query, and the metadata for your table might not be available at that moment. Wait for a few seconds, and then try the <c>DescribeTable</c> request again. </para></note> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.GetDDBTableCmdlet.TableName"> <summary> <para> <para>The name of the table to describe. You can also provide the Amazon Resource Name (ARN) of the table in this parameter.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.GetDDBTableCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'Table'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DynamoDBv2.Model.DescribeTableResponse). Specifying the name of a property of type Amazon.DynamoDBv2.Model.DescribeTableResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.GetDDBTableCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the TableName parameter. The -PassThru parameter is deprecated, use -Select '^TableName' instead. This parameter will be removed in a future version. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.DDB.GetDDBTableListCmdlet"> <summary> Returns an array of table names associated with the current account and endpoint. The output from <c>ListTables</c> is paginated, with each page returning a maximum of 100 table names.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.GetDDBTableListCmdlet.ExclusiveStartTableName"> <summary> <para> <para>The first table name that this operation will evaluate. Use the value that was returned for <c>LastEvaluatedTableName</c> in a previous operation, so that you can obtain the next page of results.</para> </para> <para> <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call. <br/>'ExclusiveStartTableName' is only returned by the cmdlet when '-Select *' is specified. In order to manually control output pagination, set '-ExclusiveStartTableName' to null for the first call then set the 'ExclusiveStartTableName' using the same property output from the previous call for subsequent calls. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.GetDDBTableListCmdlet.Limit"> <summary> <para> <para>A maximum number of table names to return. If this parameter is not specified, the limit is 100.</para> </para> <para> <br/><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet. <br/>In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call. <br/>Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.GetDDBTableListCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'TableNames'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DynamoDBv2.Model.ListTablesResponse). Specifying the name of a property of type Amazon.DynamoDBv2.Model.ListTablesResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.GetDDBTableListCmdlet.NoAutoIteration"> <summary> By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of ExclusiveStartTableName as the start point. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.DDB.GetDDBTableReplicaAutoScalingCmdlet"> <summary> Describes auto scaling settings across replicas of the global table at once. <important><para> For global tables, this operation only applies to global tables using Version 2019.11.21 (Current version). </para></important> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.GetDDBTableReplicaAutoScalingCmdlet.TableName"> <summary> <para> <para>The name of the table. You can also provide the Amazon Resource Name (ARN) of the table in this parameter.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.GetDDBTableReplicaAutoScalingCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'TableAutoScalingDescription'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DynamoDBv2.Model.DescribeTableReplicaAutoScalingResponse). Specifying the name of a property of type Amazon.DynamoDBv2.Model.DescribeTableReplicaAutoScalingResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.GetDDBTableReplicaAutoScalingCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the TableName parameter. The -PassThru parameter is deprecated, use -Select '^TableName' instead. This parameter will be removed in a future version. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.DDB.GetDDBTimeToLiveCmdlet"> <summary> Gives a description of the Time to Live (TTL) status on the specified table. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.GetDDBTimeToLiveCmdlet.TableName"> <summary> <para> <para>The name of the table to be described. You can also provide the Amazon Resource Name (ARN) of the table in this parameter.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.GetDDBTimeToLiveCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'TimeToLiveDescription'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DynamoDBv2.Model.DescribeTimeToLiveResponse). Specifying the name of a property of type Amazon.DynamoDBv2.Model.DescribeTimeToLiveResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.GetDDBTimeToLiveCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the TableName parameter. The -PassThru parameter is deprecated, use -Select '^TableName' instead. This parameter will be removed in a future version. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.DDB.ImportDDBTableCmdlet"> <summary> Imports table data from an S3 bucket. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.ImportDDBTableCmdlet.TableCreationParameters_AttributeDefinition"> <summary> <para> <para> The attributes of the table created as part of the import operation. </para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.ImportDDBTableCmdlet.TableCreationParameters_BillingMode"> <summary> <para> <para> The billing mode for provisioning the table created as part of the import operation. </para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.ImportDDBTableCmdlet.Csv_Delimiter"> <summary> <para> <para> The delimiter used for separating items in the CSV file being imported. </para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.ImportDDBTableCmdlet.SSESpecification_Enabled"> <summary> <para> <para>Indicates whether server-side encryption is done using an Amazon Web Services managed key or an Amazon Web Services owned key. If enabled (true), server-side encryption type is set to <c>KMS</c> and an Amazon Web Services managed key is used (KMS charges apply). If disabled (false) or not specified, server-side encryption is set to Amazon Web Services owned key.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.ImportDDBTableCmdlet.TableCreationParameters_GlobalSecondaryIndex"> <summary> <para> <para> The Global Secondary Indexes (GSI) of the table to be created as part of the import operation. </para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.ImportDDBTableCmdlet.Csv_HeaderList"> <summary> <para> <para> List of the headers used to specify a common header for all source CSV files being imported. If this field is specified then the first line of each CSV file is treated as data instead of the header. If this field is not specified the the first line of each CSV file is treated as the header. </para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.ImportDDBTableCmdlet.InputCompressionType"> <summary> <para> <para> Type of compression to be used on the input coming from the imported table. </para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.ImportDDBTableCmdlet.InputFormat"> <summary> <para> <para> The format of the source data. Valid values for <c>ImportFormat</c> are <c>CSV</c>, <c>DYNAMODB_JSON</c> or <c>ION</c>. </para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.ImportDDBTableCmdlet.TableCreationParameters_KeySchema"> <summary> <para> <para> The primary key and option sort key of the table created as part of the import operation. </para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.ImportDDBTableCmdlet.SSESpecification_KMSMasterKeyId"> <summary> <para> <para>The KMS key that should be used for the KMS encryption. To specify a key, use its key ID, Amazon Resource Name (ARN), alias name, or alias ARN. Note that you should only provide this parameter if the key is different from the default DynamoDB key <c>alias/aws/dynamodb</c>.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.ImportDDBTableCmdlet.OnDemandThroughput_MaxReadRequestUnit"> <summary> <para> <para>Maximum number of read request units for the specified table.</para><para>To specify a maximum <c>OnDemandThroughput</c> on your table, set the value of <c>MaxReadRequestUnits</c> as greater than or equal to 1. To remove the maximum <c>OnDemandThroughput</c> that is currently set on your table, set the value of <c>MaxReadRequestUnits</c> to -1.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.ImportDDBTableCmdlet.OnDemandThroughput_MaxWriteRequestUnit"> <summary> <para> <para>Maximum number of write request units for the specified table.</para><para>To specify a maximum <c>OnDemandThroughput</c> on your table, set the value of <c>MaxWriteRequestUnits</c> as greater than or equal to 1. To remove the maximum <c>OnDemandThroughput</c> that is currently set on your table, set the value of <c>MaxWriteRequestUnits</c> to -1.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.ImportDDBTableCmdlet.ProvisionedThroughput_ReadCapacityUnit"> <summary> <para> <para>The maximum number of strongly consistent reads consumed per second before DynamoDB returns a <c>ThrottlingException</c>. For more information, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/ProvisionedThroughput.html">Specifying Read and Write Requirements</a> in the <i>Amazon DynamoDB Developer Guide</i>.</para><para>If read/write capacity mode is <c>PAY_PER_REQUEST</c> the value is set to 0.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.ImportDDBTableCmdlet.S3BucketSource_S3Bucket"> <summary> <para> <para> The S3 bucket that is being imported from. </para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.ImportDDBTableCmdlet.S3BucketSource_S3BucketOwner"> <summary> <para> <para> The account number of the S3 bucket that is being imported from. If the bucket is owned by the requester this is optional. </para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.ImportDDBTableCmdlet.S3BucketSource_S3KeyPrefix"> <summary> <para> <para> The key prefix shared by all S3 Objects that are being imported. </para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.ImportDDBTableCmdlet.SSESpecification_SSEType"> <summary> <para> <para>Server-side encryption type. The only supported value is:</para><ul><li><para><c>KMS</c> - Server-side encryption that uses Key Management Service. The key is stored in your account and is managed by KMS (KMS charges apply).</para></li></ul> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.ImportDDBTableCmdlet.TableCreationParameters_TableName"> <summary> <para> <para> The name of the table created as part of the import operation. </para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.ImportDDBTableCmdlet.ProvisionedThroughput_WriteCapacityUnit"> <summary> <para> <para>The maximum number of writes consumed per second before DynamoDB returns a <c>ThrottlingException</c>. For more information, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/ProvisionedThroughput.html">Specifying Read and Write Requirements</a> in the <i>Amazon DynamoDB Developer Guide</i>.</para><para>If read/write capacity mode is <c>PAY_PER_REQUEST</c> the value is set to 0.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.ImportDDBTableCmdlet.ClientToken"> <summary> <para> <para>Providing a <c>ClientToken</c> makes the call to <c>ImportTableInput</c> idempotent, meaning that multiple identical calls have the same effect as one single call.</para><para>A client token is valid for 8 hours after the first request that uses it is completed. After 8 hours, any request with the same client token is treated as a new request. Do not resubmit the same request with the same client token for more than 8 hours, or the result might not be idempotent.</para><para>If you submit a request with the same client token but a change in other parameters within the 8-hour idempotency window, DynamoDB returns an <c>IdempotentParameterMismatch</c> exception.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.ImportDDBTableCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'ImportTableDescription'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DynamoDBv2.Model.ImportTableResponse). Specifying the name of a property of type Amazon.DynamoDBv2.Model.ImportTableResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.ImportDDBTableCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the InputFormat parameter. The -PassThru parameter is deprecated, use -Select '^InputFormat' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.ImportDDBTableCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.DDB.InvokeDDBDDBBatchExecuteStatementCmdlet"> <summary> This operation allows you to perform batch reads or writes on data stored in DynamoDB, using PartiQL. Each read statement in a <c>BatchExecuteStatement</c> must specify an equality condition on all key attributes. This enforces that each <c>SELECT</c> statement in a batch returns at most a single item. For more information, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/ql-reference.multiplestatements.batching.html">Running batch operations with PartiQL for DynamoDB </a>. <note><para> The entire batch must consist of either read statements or write statements, you cannot mix both in one batch. </para></note><important><para> A HTTP 200 response does not mean that all statements in the BatchExecuteStatement succeeded. Error details for individual statements can be found under the <a href="https://docs.aws.amazon.com/amazondynamodb/latest/APIReference/API_BatchStatementResponse.html#DDB-Type-BatchStatementResponse-Error">Error</a> field of the <c>BatchStatementResponse</c> for each statement. </para></important> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.InvokeDDBDDBBatchExecuteStatementCmdlet.ReturnConsumedCapacity"> <summary> <para> The service has not provided documentation for this parameter; please refer to the service's API reference documentation for the latest available information. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.InvokeDDBDDBBatchExecuteStatementCmdlet.Statement"> <summary> <para> <para>The list of PartiQL statements representing the batch to run.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.InvokeDDBDDBBatchExecuteStatementCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'Responses'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DynamoDBv2.Model.BatchExecuteStatementResponse). Specifying the name of a property of type Amazon.DynamoDBv2.Model.BatchExecuteStatementResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.InvokeDDBDDBBatchExecuteStatementCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the ReturnConsumedCapacity parameter. The -PassThru parameter is deprecated, use -Select '^ReturnConsumedCapacity' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.InvokeDDBDDBBatchExecuteStatementCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.DDB.InvokeDDBDDBExecuteStatementCmdlet"> <summary> This operation allows you to perform reads and singleton writes on data stored in DynamoDB, using PartiQL. <para> For PartiQL reads (<c>SELECT</c> statement), if the total number of processed items exceeds the maximum dataset size limit of 1 MB, the read stops and results are returned to the user as a <c>LastEvaluatedKey</c> value to continue the read in a subsequent operation. If the filter criteria in <c>WHERE</c> clause does not match any data, the read will return an empty result set. </para><para> A single <c>SELECT</c> statement response can return up to the maximum number of items (if using the Limit parameter) or a maximum of 1 MB of data (and then apply any filtering to the results using <c>WHERE</c> clause). If <c>LastEvaluatedKey</c> is present in the response, you need to paginate the result set. If <c>NextToken</c> is present, you need to paginate the result set and include <c>NextToken</c>. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.InvokeDDBDDBExecuteStatementCmdlet.ConsistentRead"> <summary> <para> <para>The consistency of a read operation. If set to <c>true</c>, then a strongly consistent read is used; otherwise, an eventually consistent read is used.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.InvokeDDBDDBExecuteStatementCmdlet.Parameter"> <summary> <para> <para>The parameters for the PartiQL statement, if any.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.InvokeDDBDDBExecuteStatementCmdlet.ReturnConsumedCapacity"> <summary> <para> The service has not provided documentation for this parameter; please refer to the service's API reference documentation for the latest available information. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.InvokeDDBDDBExecuteStatementCmdlet.ReturnValuesOnConditionCheckFailure"> <summary> <para> <para>An optional parameter that returns the item attributes for an <c>ExecuteStatement</c> operation that failed a condition check.</para><para>There is no additional cost associated with requesting a return value aside from the small network and processing overhead of receiving a larger response. No read capacity units are consumed.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.InvokeDDBDDBExecuteStatementCmdlet.Statement"> <summary> <para> <para>The PartiQL statement representing the operation to run.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.InvokeDDBDDBExecuteStatementCmdlet.Limit"> <summary> <para> <para>The maximum number of items to evaluate (not necessarily the number of matching items). If DynamoDB processes the number of items up to the limit while processing the results, it stops the operation and returns the matching values up to that point, along with a key in <c>LastEvaluatedKey</c> to apply in a subsequent operation so you can pick up where you left off. Also, if the processed dataset size exceeds 1 MB before DynamoDB reaches this limit, it stops the operation and returns the matching values up to the limit, and a key in <c>LastEvaluatedKey</c> to apply in a subsequent operation to continue the operation. </para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.InvokeDDBDDBExecuteStatementCmdlet.NextToken"> <summary> <para> <para>Set this value to get remaining results, if <c>NextToken</c> was returned in the statement response.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.InvokeDDBDDBExecuteStatementCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'Items'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DynamoDBv2.Model.ExecuteStatementResponse). Specifying the name of a property of type Amazon.DynamoDBv2.Model.ExecuteStatementResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.InvokeDDBDDBExecuteStatementCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the Statement parameter. The -PassThru parameter is deprecated, use -Select '^Statement' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.InvokeDDBDDBExecuteStatementCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.DDB.InvokeDDBDDBExecuteTransactionCmdlet"> <summary> This operation allows you to perform transactional reads or writes on data stored in DynamoDB, using PartiQL. <note><para> The entire transaction must consist of either read statements or write statements, you cannot mix both in one transaction. The EXISTS function is an exception and can be used to check the condition of specific attributes of the item in a similar manner to <c>ConditionCheck</c> in the <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/transaction-apis.html#transaction-apis-txwriteitems">TransactWriteItems</a> API. </para></note> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.InvokeDDBDDBExecuteTransactionCmdlet.ClientRequestToken"> <summary> <para> <para>Set this value to get remaining results, if <c>NextToken</c> was returned in the statement response.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.InvokeDDBDDBExecuteTransactionCmdlet.ReturnConsumedCapacity"> <summary> <para> <para>Determines the level of detail about either provisioned or on-demand throughput consumption that is returned in the response. For more information, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/APIReference/API_TransactGetItems.html">TransactGetItems</a> and <a href="https://docs.aws.amazon.com/amazondynamodb/latest/APIReference/API_TransactWriteItems.html">TransactWriteItems</a>.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.InvokeDDBDDBExecuteTransactionCmdlet.TransactStatement"> <summary> <para> <para>The list of PartiQL statements representing the transaction to run.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.InvokeDDBDDBExecuteTransactionCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'Responses'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DynamoDBv2.Model.ExecuteTransactionResponse). Specifying the name of a property of type Amazon.DynamoDBv2.Model.ExecuteTransactionResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.InvokeDDBDDBExecuteTransactionCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the ClientRequestToken parameter. The -PassThru parameter is deprecated, use -Select '^ClientRequestToken' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.InvokeDDBDDBExecuteTransactionCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.DDB.InvokeDDBQueryCmdlet"> <summary> You must provide the name of the partition key attribute and a single value for that attribute. <c>Query</c> returns all items with that partition key value. Optionally, you can provide a sort key attribute and use a comparison operator to refine the search results. <para> Use the <c>KeyConditionExpression</c> parameter to provide a specific value for the partition key. The <c>Query</c> operation will return all of the items from the table or index with that partition key value. You can optionally narrow the scope of the <c>Query</c> operation by specifying a sort key value and a comparison operator in <c>KeyConditionExpression</c>. To further refine the <c>Query</c> results, you can optionally provide a <c>FilterExpression</c>. A <c>FilterExpression</c> determines which items within the results should be returned to you. All of the other results are discarded. </para><para> A <c>Query</c> operation always returns a result set. If no matching items are found, the result set will be empty. Queries that do not return results consume the minimum number of read capacity units for that type of read operation. </para><note><para> DynamoDB calculates the number of read capacity units consumed based on item size, not on the amount of data that is returned to an application. The number of capacity units consumed will be the same whether you request all of the attributes (the default behavior) or just some of them (using a projection expression). The number will also be the same whether or not you use a <c>FilterExpression</c>. </para></note><para><c>Query</c> results are always sorted by the sort key value. If the data type of the sort key is Number, the results are returned in numeric order; otherwise, the results are returned in order of UTF-8 bytes. By default, the sort order is ascending. To reverse the order, set the <c>ScanIndexForward</c> parameter to false. </para><para> A single <c>Query</c> operation will read up to the maximum number of items set (if using the <c>Limit</c> parameter) or a maximum of 1 MB of data and then apply any filtering to the results using <c>FilterExpression</c>. If <c>LastEvaluatedKey</c> is present in the response, you will need to paginate the result set. For more information, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Query.html#Query.Pagination">Paginating the Results</a> in the <i>Amazon DynamoDB Developer Guide</i>. </para><para><c>FilterExpression</c> is applied after a <c>Query</c> finishes, but before the results are returned. A <c>FilterExpression</c> cannot contain partition key or sort key attributes. You need to specify those attributes in the <c>KeyConditionExpression</c>. </para><note><para> A <c>Query</c> operation can return an empty result set and a <c>LastEvaluatedKey</c> if all the items read for the page of results are filtered out. </para></note><para> You can query a table, a local secondary index, or a global secondary index. For a query on a table or on a local secondary index, you can set the <c>ConsistentRead</c> parameter to <c>true</c> and obtain a strongly consistent result. Global secondary indexes support eventually consistent reads only, so do not specify <c>ConsistentRead</c> when querying a global secondary index. </para><br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.InvokeDDBQueryCmdlet.AttributesToGet"> <summary> <para> <para>This is a legacy parameter. Use <c>ProjectionExpression</c> instead. For more information, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/LegacyConditionalParameters.AttributesToGet.html">AttributesToGet</a> in the <i>Amazon DynamoDB Developer Guide</i>.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.InvokeDDBQueryCmdlet.ConditionalOperator"> <summary> <para> <para>This is a legacy parameter. Use <c>FilterExpression</c> instead. For more information, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/LegacyConditionalParameters.ConditionalOperator.html">ConditionalOperator</a> in the <i>Amazon DynamoDB Developer Guide</i>.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.InvokeDDBQueryCmdlet.ConsistentRead"> <summary> <para> <para>Determines the read consistency model: If set to <c>true</c>, then the operation uses strongly consistent reads; otherwise, the operation uses eventually consistent reads.</para><para>Strongly consistent reads are not supported on global secondary indexes. If you query a global secondary index with <c>ConsistentRead</c> set to <c>true</c>, you will receive a <c>ValidationException</c>.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.InvokeDDBQueryCmdlet.ExpressionAttributeName"> <summary> <para> <para>One or more substitution tokens for attribute names in an expression. The following are some use cases for using <c>ExpressionAttributeNames</c>:</para><ul><li><para>To access an attribute whose name conflicts with a DynamoDB reserved word.</para></li><li><para>To create a placeholder for repeating occurrences of an attribute name in an expression.</para></li><li><para>To prevent special characters in an attribute name from being misinterpreted in an expression.</para></li></ul><para>Use the <b>#</b> character in an expression to dereference an attribute name. For example, consider the following attribute name:</para><ul><li><para><c>Percentile</c></para></li></ul><para>The name of this attribute conflicts with a reserved word, so it cannot be used directly in an expression. (For the complete list of reserved words, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/ReservedWords.html">Reserved Words</a> in the <i>Amazon DynamoDB Developer Guide</i>). To work around this, you could specify the following for <c>ExpressionAttributeNames</c>:</para><ul><li><para><c>{"#P":"Percentile"}</c></para></li></ul><para>You could then use this substitution in an expression, as in this example:</para><ul><li><para><c>#P = :val</c></para></li></ul><note><para>Tokens that begin with the <b>:</b> character are <i>expression attribute values</i>, which are placeholders for the actual value at runtime.</para></note><para>For more information on expression attribute names, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Expressions.AccessingItemAttributes.html">Specifying Item Attributes</a> in the <i>Amazon DynamoDB Developer Guide</i>.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.InvokeDDBQueryCmdlet.ExpressionAttributeValue"> <summary> <para> <para>One or more values that can be substituted in an expression.</para><para>Use the <b>:</b> (colon) character in an expression to dereference an attribute value. For example, suppose that you wanted to check whether the value of the <i>ProductStatus</i> attribute was one of the following: </para><para><c>Available | Backordered | Discontinued</c></para><para>You would first need to specify <c>ExpressionAttributeValues</c> as follows:</para><para><c>{ ":avail":{"S":"Available"}, ":back":{"S":"Backordered"}, ":disc":{"S":"Discontinued"} }</c></para><para>You could then use these values in an expression, such as this:</para><para><c>ProductStatus IN (:avail, :back, :disc)</c></para><para>For more information on expression attribute values, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Expressions.SpecifyingConditions.html">Specifying Conditions</a> in the <i>Amazon DynamoDB Developer Guide</i>.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.InvokeDDBQueryCmdlet.FilterExpression"> <summary> <para> <para>A string that contains conditions that DynamoDB applies after the <c>Query</c> operation, but before the data is returned to you. Items that do not satisfy the <c>FilterExpression</c> criteria are not returned.</para><para>A <c>FilterExpression</c> does not allow key attributes. You cannot define a filter expression based on a partition key or a sort key.</para><note><para>A <c>FilterExpression</c> is applied after the items have already been read; the process of filtering does not consume any additional read capacity units.</para></note><para>For more information, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Query.FilterExpression.html">Filter Expressions</a> in the <i>Amazon DynamoDB Developer Guide</i>.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.InvokeDDBQueryCmdlet.IndexName"> <summary> <para> <para>The name of an index to query. This index can be any local secondary index or global secondary index on the table. Note that if you use the <c>IndexName</c> parameter, you must also provide <c>TableName.</c></para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.InvokeDDBQueryCmdlet.IsLimitSet"> <summary> <para> This property is set to true if the property <seealso cref="P:Amazon.DynamoDBv2.Model.QueryRequest.Limit" /> is set; false otherwise. This property can be used to determine if the related property was returned by a service response or if the related property should be sent to the service during a service call. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.InvokeDDBQueryCmdlet.KeyConditionExpression"> <summary> <para> <para>The condition that specifies the key values for items to be retrieved by the <c>Query</c> action.</para><para>The condition must perform an equality test on a single partition key value.</para><para>The condition can optionally perform one of several comparison tests on a single sort key value. This allows <c>Query</c> to retrieve one item with a given partition key value and sort key value, or several items that have the same partition key value but different sort key values.</para><para>The partition key equality test is required, and must be specified in the following format:</para><para><c>partitionKeyName</c><i>=</i><c>:partitionkeyval</c></para><para>If you also want to provide a condition for the sort key, it must be combined using <c>AND</c> with the condition for the sort key. Following is an example, using the <b>=</b> comparison operator for the sort key:</para><para><c>partitionKeyName</c><c>=</c><c>:partitionkeyval</c><c>AND</c><c>sortKeyName</c><c>=</c><c>:sortkeyval</c></para><para>Valid comparisons for the sort key condition are as follows:</para><ul><li><para><c>sortKeyName</c><c>=</c><c>:sortkeyval</c> - true if the sort key value is equal to <c>:sortkeyval</c>.</para></li><li><para><c>sortKeyName</c><c><</c><c>:sortkeyval</c> - true if the sort key value is less than <c>:sortkeyval</c>.</para></li><li><para><c>sortKeyName</c><c><=</c><c>:sortkeyval</c> - true if the sort key value is less than or equal to <c>:sortkeyval</c>.</para></li><li><para><c>sortKeyName</c><c>></c><c>:sortkeyval</c> - true if the sort key value is greater than <c>:sortkeyval</c>.</para></li><li><para><c>sortKeyName</c><c>>= </c><c>:sortkeyval</c> - true if the sort key value is greater than or equal to <c>:sortkeyval</c>.</para></li><li><para><c>sortKeyName</c><c>BETWEEN</c><c>:sortkeyval1</c><c>AND</c><c>:sortkeyval2</c> - true if the sort key value is greater than or equal to <c>:sortkeyval1</c>, and less than or equal to <c>:sortkeyval2</c>.</para></li><li><para><c>begins_with (</c><c>sortKeyName</c>, <c>:sortkeyval</c><c>)</c> - true if the sort key value begins with a particular operand. (You cannot use this function with a sort key that is of type Number.) Note that the function name <c>begins_with</c> is case-sensitive.</para></li></ul><para>Use the <c>ExpressionAttributeValues</c> parameter to replace tokens such as <c>:partitionval</c> and <c>:sortval</c> with actual values at runtime.</para><para>You can optionally use the <c>ExpressionAttributeNames</c> parameter to replace the names of the partition key and sort key with placeholder tokens. This option might be necessary if an attribute name conflicts with a DynamoDB reserved word. For example, the following <c>KeyConditionExpression</c> parameter causes an error because <i>Size</i> is a reserved word:</para><ul><li><para><c>Size = :myval</c></para></li></ul><para>To work around this, define a placeholder (such a <c>#S</c>) to represent the attribute name <i>Size</i>. <c>KeyConditionExpression</c> then is as follows:</para><ul><li><para><c>#S = :myval</c></para></li></ul><para>For a list of reserved words, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/ReservedWords.html">Reserved Words</a> in the <i>Amazon DynamoDB Developer Guide</i>.</para><para>For more information on <c>ExpressionAttributeNames</c> and <c>ExpressionAttributeValues</c>, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/ExpressionPlaceholders.html">Using Placeholders for Attribute Names and Values</a> in the <i>Amazon DynamoDB Developer Guide</i>.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.InvokeDDBQueryCmdlet.KeyCondition"> <summary> <para> <para>This is a legacy parameter. Use <c>KeyConditionExpression</c> instead. For more information, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/LegacyConditionalParameters.KeyConditions.html">KeyConditions</a> in the <i>Amazon DynamoDB Developer Guide</i>.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.InvokeDDBQueryCmdlet.ProjectionExpression"> <summary> <para> <para>A string that identifies one or more attributes to retrieve from the table. These attributes can include scalars, sets, or elements of a JSON document. The attributes in the expression must be separated by commas.</para><para>If no attribute names are specified, then all attributes will be returned. If any of the requested attributes are not found, they will not appear in the result.</para><para>For more information, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Expressions.AccessingItemAttributes.html">Accessing Item Attributes</a> in the <i>Amazon DynamoDB Developer Guide</i>.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.InvokeDDBQueryCmdlet.QueryFilter"> <summary> <para> <para>This is a legacy parameter. Use <c>FilterExpression</c> instead. For more information, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/LegacyConditionalParameters.QueryFilter.html">QueryFilter</a> in the <i>Amazon DynamoDB Developer Guide</i>.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.InvokeDDBQueryCmdlet.ReturnConsumedCapacity"> <summary> <para> The service has not provided documentation for this parameter; please refer to the service's API reference documentation for the latest available information. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.InvokeDDBQueryCmdlet.ScanIndexForward"> <summary> <para> <para>Specifies the order for index traversal: If <c>true</c> (default), the traversal is performed in ascending order; if <c>false</c>, the traversal is performed in descending order. </para><para>Items with the same partition key value are stored in sorted order by sort key. If the sort key data type is Number, the results are stored in numeric order. For type String, the results are stored in order of UTF-8 bytes. For type Binary, DynamoDB treats each byte of the binary data as unsigned.</para><para>If <c>ScanIndexForward</c> is <c>true</c>, DynamoDB returns the results in the order in which they are stored (by sort key value). This is the default behavior. If <c>ScanIndexForward</c> is <c>false</c>, DynamoDB reads the results in reverse order by sort key value, and then returns the results to the client.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.InvokeDDBQueryCmdlet.SelectItem"> <summary> <para> <para>The attributes to be returned in the result. You can retrieve all item attributes, specific item attributes, the count of matching items, or in the case of an index, some or all of the attributes projected into the index.</para><ul><li><para><c>ALL_ATTRIBUTES</c> - Returns all of the item attributes from the specified table or index. If you query a local secondary index, then for each matching item in the index, DynamoDB fetches the entire item from the parent table. If the index is configured to project all item attributes, then all of the data can be obtained from the local secondary index, and no fetching is required.</para></li><li><para><c>ALL_PROJECTED_ATTRIBUTES</c> - Allowed only when querying an index. Retrieves all attributes that have been projected into the index. If the index is configured to project all attributes, this return value is equivalent to specifying <c>ALL_ATTRIBUTES</c>.</para></li><li><para><c>COUNT</c> - Returns the number of matching items, rather than the matching items themselves. Note that this uses the same quantity of read capacity units as getting the items, and is subject to the same item size calculations.</para></li><li><para><c>SPECIFIC_ATTRIBUTES</c> - Returns only the attributes listed in <c>ProjectionExpression</c>. This return value is equivalent to specifying <c>ProjectionExpression</c> without specifying any value for <c>Select</c>.</para><para>If you query or scan a local secondary index and request only attributes that are projected into that index, the operation will read only the index and not the table. If any of the requested attributes are not projected into the local secondary index, DynamoDB fetches each of these attributes from the parent table. This extra fetching incurs additional throughput cost and latency.</para><para>If you query or scan a global secondary index, you can only request attributes that are projected into the index. Global secondary index queries cannot fetch attributes from the parent table.</para></li></ul><para>If neither <c>Select</c> nor <c>ProjectionExpression</c> are specified, DynamoDB defaults to <c>ALL_ATTRIBUTES</c> when accessing a table, and <c>ALL_PROJECTED_ATTRIBUTES</c> when accessing an index. You cannot use both <c>Select</c> and <c>ProjectionExpression</c> together in a single request, unless the value for <c>Select</c> is <c>SPECIFIC_ATTRIBUTES</c>. (This usage is equivalent to specifying <c>ProjectionExpression</c> without any value for <c>Select</c>.)</para><note><para>If you use the <c>ProjectionExpression</c> parameter, then the value for <c>Select</c> can only be <c>SPECIFIC_ATTRIBUTES</c>. Any other value for <c>Select</c> will return an error.</para></note> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.InvokeDDBQueryCmdlet.TableName"> <summary> <para> <para>The name of the table containing the requested items. You can also provide the Amazon Resource Name (ARN) of the table in this parameter.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.InvokeDDBQueryCmdlet.ExclusiveStartKey"> <summary> <para> <para>The primary key of the first item that this operation will evaluate. Use the value that was returned for <c>LastEvaluatedKey</c> in the previous operation.</para><para>The data type for <c>ExclusiveStartKey</c> must be String, Number, or Binary. No set data types are allowed.</para> </para> <para> <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call. <br/>'ExclusiveStartKey' is only returned by the cmdlet when '-Select *' is specified. In order to manually control output pagination, set '-ExclusiveStartKey' to null for the first call then set the 'ExclusiveStartKey' using the same property output from the previous call for subsequent calls. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.InvokeDDBQueryCmdlet.Limit"> <summary> <para> <para>The maximum number of items to evaluate (not necessarily the number of matching items). If DynamoDB processes the number of items up to the limit while processing the results, it stops the operation and returns the matching values up to that point, and a key in <c>LastEvaluatedKey</c> to apply in a subsequent operation, so that you can pick up where you left off. Also, if the processed dataset size exceeds 1 MB before DynamoDB reaches this limit, it stops the operation and returns the matching values up to the limit, and a key in <c>LastEvaluatedKey</c> to apply in a subsequent operation to continue the operation. For more information, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/QueryAndScan.html">Query and Scan</a> in the <i>Amazon DynamoDB Developer Guide</i>.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.InvokeDDBQueryCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'Items'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DynamoDBv2.Model.QueryResponse). Specifying the name of a property of type Amazon.DynamoDBv2.Model.QueryResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.InvokeDDBQueryCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the TableName parameter. The -PassThru parameter is deprecated, use -Select '^TableName' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.InvokeDDBQueryCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.InvokeDDBQueryCmdlet.NoAutoIteration"> <summary> By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of ExclusiveStartKey as the start point. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.DDB.InvokeDDBScanCmdlet"> <summary> The <c>Scan</c> operation returns one or more items and item attributes by accessing every item in a table or a secondary index. To have DynamoDB return fewer items, you can provide a <c>FilterExpression</c> operation. <para> If the total size of scanned items exceeds the maximum dataset size limit of 1 MB, the scan completes and results are returned to the user. The <c>LastEvaluatedKey</c> value is also returned and the requestor can use the <c>LastEvaluatedKey</c> to continue the scan in a subsequent operation. Each scan response also includes number of items that were scanned (ScannedCount) as part of the request. If using a <c>FilterExpression</c>, a scan result can result in no items meeting the criteria and the <c>Count</c> will result in zero. If you did not use a <c>FilterExpression</c> in the scan request, then <c>Count</c> is the same as <c>ScannedCount</c>. </para><note><para><c>Count</c> and <c>ScannedCount</c> only return the count of items specific to a single scan request and, unless the table is less than 1MB, do not represent the total number of items in the table. </para></note><para> A single <c>Scan</c> operation first reads up to the maximum number of items set (if using the <c>Limit</c> parameter) or a maximum of 1 MB of data and then applies any filtering to the results if a <c>FilterExpression</c> is provided. If <c>LastEvaluatedKey</c> is present in the response, pagination is required to complete the full table scan. For more information, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Scan.html#Scan.Pagination">Paginating the Results</a> in the <i>Amazon DynamoDB Developer Guide</i>. </para><para><c>Scan</c> operations proceed sequentially; however, for faster performance on a large table or secondary index, applications can request a parallel <c>Scan</c> operation by providing the <c>Segment</c> and <c>TotalSegments</c> parameters. For more information, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Scan.html#Scan.ParallelScan">Parallel Scan</a> in the <i>Amazon DynamoDB Developer Guide</i>. </para><para> By default, a <c>Scan</c> uses eventually consistent reads when accessing the items in a table. Therefore, the results from an eventually consistent <c>Scan</c> may not include the latest item changes at the time the scan iterates through each item in the table. If you require a strongly consistent read of each item as the scan iterates through the items in the table, you can set the <c>ConsistentRead</c> parameter to true. Strong consistency only relates to the consistency of the read at the item level. </para><note><para> DynamoDB does not provide snapshot isolation for a scan operation when the <c>ConsistentRead</c> parameter is set to true. Thus, a DynamoDB scan operation does not guarantee that all reads in a scan see a consistent snapshot of the table when the scan operation was requested. </para></note><br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.InvokeDDBScanCmdlet.AttributesToGet"> <summary> <para> <para>This is a legacy parameter. Use <c>ProjectionExpression</c> instead. For more information, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/LegacyConditionalParameters.AttributesToGet.html">AttributesToGet</a> in the <i>Amazon DynamoDB Developer Guide</i>.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.InvokeDDBScanCmdlet.ConditionalOperator"> <summary> <para> <para>This is a legacy parameter. Use <c>FilterExpression</c> instead. For more information, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/LegacyConditionalParameters.ConditionalOperator.html">ConditionalOperator</a> in the <i>Amazon DynamoDB Developer Guide</i>.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.InvokeDDBScanCmdlet.ConsistentRead"> <summary> <para> <para>A Boolean value that determines the read consistency model during the scan:</para><ul><li><para>If <c>ConsistentRead</c> is <c>false</c>, then the data returned from <c>Scan</c> might not contain the results from other recently completed write operations (<c>PutItem</c>, <c>UpdateItem</c>, or <c>DeleteItem</c>).</para></li><li><para>If <c>ConsistentRead</c> is <c>true</c>, then all of the write operations that completed before the <c>Scan</c> began are guaranteed to be contained in the <c>Scan</c> response.</para></li></ul><para>The default setting for <c>ConsistentRead</c> is <c>false</c>.</para><para>The <c>ConsistentRead</c> parameter is not supported on global secondary indexes. If you scan a global secondary index with <c>ConsistentRead</c> set to true, you will receive a <c>ValidationException</c>.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.InvokeDDBScanCmdlet.ExpressionAttributeName"> <summary> <para> <para>One or more substitution tokens for attribute names in an expression. The following are some use cases for using <c>ExpressionAttributeNames</c>:</para><ul><li><para>To access an attribute whose name conflicts with a DynamoDB reserved word.</para></li><li><para>To create a placeholder for repeating occurrences of an attribute name in an expression.</para></li><li><para>To prevent special characters in an attribute name from being misinterpreted in an expression.</para></li></ul><para>Use the <b>#</b> character in an expression to dereference an attribute name. For example, consider the following attribute name:</para><ul><li><para><c>Percentile</c></para></li></ul><para>The name of this attribute conflicts with a reserved word, so it cannot be used directly in an expression. (For the complete list of reserved words, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/ReservedWords.html">Reserved Words</a> in the <i>Amazon DynamoDB Developer Guide</i>). To work around this, you could specify the following for <c>ExpressionAttributeNames</c>:</para><ul><li><para><c>{"#P":"Percentile"}</c></para></li></ul><para>You could then use this substitution in an expression, as in this example:</para><ul><li><para><c>#P = :val</c></para></li></ul><note><para>Tokens that begin with the <b>:</b> character are <i>expression attribute values</i>, which are placeholders for the actual value at runtime.</para></note><para>For more information on expression attribute names, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Expressions.AccessingItemAttributes.html">Specifying Item Attributes</a> in the <i>Amazon DynamoDB Developer Guide</i>.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.InvokeDDBScanCmdlet.ExpressionAttributeValue"> <summary> <para> <para>One or more values that can be substituted in an expression.</para><para>Use the <b>:</b> (colon) character in an expression to dereference an attribute value. For example, suppose that you wanted to check whether the value of the <c>ProductStatus</c> attribute was one of the following: </para><para><c>Available | Backordered | Discontinued</c></para><para>You would first need to specify <c>ExpressionAttributeValues</c> as follows:</para><para><c>{ ":avail":{"S":"Available"}, ":back":{"S":"Backordered"}, ":disc":{"S":"Discontinued"} }</c></para><para>You could then use these values in an expression, such as this:</para><para><c>ProductStatus IN (:avail, :back, :disc)</c></para><para>For more information on expression attribute values, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Expressions.SpecifyingConditions.html">Condition Expressions</a> in the <i>Amazon DynamoDB Developer Guide</i>.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.InvokeDDBScanCmdlet.FilterExpression"> <summary> <para> <para>A string that contains conditions that DynamoDB applies after the <c>Scan</c> operation, but before the data is returned to you. Items that do not satisfy the <c>FilterExpression</c> criteria are not returned.</para><note><para>A <c>FilterExpression</c> is applied after the items have already been read; the process of filtering does not consume any additional read capacity units.</para></note><para>For more information, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Scan.html#Scan.FilterExpression">Filter Expressions</a> in the <i>Amazon DynamoDB Developer Guide</i>.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.InvokeDDBScanCmdlet.IndexName"> <summary> <para> <para>The name of a secondary index to scan. This index can be any local secondary index or global secondary index. Note that if you use the <c>IndexName</c> parameter, you must also provide <c>TableName</c>.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.InvokeDDBScanCmdlet.IsLimitSet"> <summary> <para> This property is set to true if the property <seealso cref="P:Amazon.DynamoDBv2.Model.ScanRequest.Limit" /> is set; false otherwise. This property can be used to determine if the related property was returned by a service response or if the related property should be sent to the service during a service call. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.InvokeDDBScanCmdlet.IsSegmentSet"> <summary> <para> This property is set to true if the property <seealso cref="P:Amazon.DynamoDBv2.Model.ScanRequest.Segment" /> is set; false otherwise. This property can be used to determine if the related property was returned by a service response or if the related property should be sent to the service during a service call. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.InvokeDDBScanCmdlet.IsTotalSegmentsSet"> <summary> <para> This property is set to true if the property <seealso cref="P:Amazon.DynamoDBv2.Model.ScanRequest.TotalSegments" /> is set; false otherwise. This property can be used to determine if the related property was returned by a service response or if the related property should be sent to the service during a service call. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.InvokeDDBScanCmdlet.ProjectionExpression"> <summary> <para> <para>A string that identifies one or more attributes to retrieve from the specified table or index. These attributes can include scalars, sets, or elements of a JSON document. The attributes in the expression must be separated by commas.</para><para>If no attribute names are specified, then all attributes will be returned. If any of the requested attributes are not found, they will not appear in the result.</para><para>For more information, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Expressions.AccessingItemAttributes.html">Specifying Item Attributes</a> in the <i>Amazon DynamoDB Developer Guide</i>.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.InvokeDDBScanCmdlet.ReturnConsumedCapacity"> <summary> <para> The service has not provided documentation for this parameter; please refer to the service's API reference documentation for the latest available information. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.InvokeDDBScanCmdlet.ScanFilter"> <summary> <para> <para>This is a legacy parameter. Use <c>FilterExpression</c> instead. For more information, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/LegacyConditionalParameters.ScanFilter.html">ScanFilter</a> in the <i>Amazon DynamoDB Developer Guide</i>.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.InvokeDDBScanCmdlet.Segment"> <summary> <para> <para>For a parallel <c>Scan</c> request, <c>Segment</c> identifies an individual segment to be scanned by an application worker.</para><para>Segment IDs are zero-based, so the first segment is always 0. For example, if you want to use four application threads to scan a table or an index, then the first thread specifies a <c>Segment</c> value of 0, the second thread specifies 1, and so on.</para><para>The value of <c>LastEvaluatedKey</c> returned from a parallel <c>Scan</c> request must be used as <c>ExclusiveStartKey</c> with the same segment ID in a subsequent <c>Scan</c> operation.</para><para>The value for <c>Segment</c> must be greater than or equal to 0, and less than the value provided for <c>TotalSegments</c>.</para><para>If you provide <c>Segment</c>, you must also provide <c>TotalSegments</c>.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.InvokeDDBScanCmdlet.SelectItem"> <summary> <para> <para>The attributes to be returned in the result. You can retrieve all item attributes, specific item attributes, the count of matching items, or in the case of an index, some or all of the attributes projected into the index.</para><ul><li><para><c>ALL_ATTRIBUTES</c> - Returns all of the item attributes from the specified table or index. If you query a local secondary index, then for each matching item in the index, DynamoDB fetches the entire item from the parent table. If the index is configured to project all item attributes, then all of the data can be obtained from the local secondary index, and no fetching is required.</para></li><li><para><c>ALL_PROJECTED_ATTRIBUTES</c> - Allowed only when querying an index. Retrieves all attributes that have been projected into the index. If the index is configured to project all attributes, this return value is equivalent to specifying <c>ALL_ATTRIBUTES</c>.</para></li><li><para><c>COUNT</c> - Returns the number of matching items, rather than the matching items themselves. Note that this uses the same quantity of read capacity units as getting the items, and is subject to the same item size calculations.</para></li><li><para><c>SPECIFIC_ATTRIBUTES</c> - Returns only the attributes listed in <c>ProjectionExpression</c>. This return value is equivalent to specifying <c>ProjectionExpression</c> without specifying any value for <c>Select</c>.</para><para>If you query or scan a local secondary index and request only attributes that are projected into that index, the operation reads only the index and not the table. If any of the requested attributes are not projected into the local secondary index, DynamoDB fetches each of these attributes from the parent table. This extra fetching incurs additional throughput cost and latency.</para><para>If you query or scan a global secondary index, you can only request attributes that are projected into the index. Global secondary index queries cannot fetch attributes from the parent table.</para></li></ul><para>If neither <c>Select</c> nor <c>ProjectionExpression</c> are specified, DynamoDB defaults to <c>ALL_ATTRIBUTES</c> when accessing a table, and <c>ALL_PROJECTED_ATTRIBUTES</c> when accessing an index. You cannot use both <c>Select</c> and <c>ProjectionExpression</c> together in a single request, unless the value for <c>Select</c> is <c>SPECIFIC_ATTRIBUTES</c>. (This usage is equivalent to specifying <c>ProjectionExpression</c> without any value for <c>Select</c>.)</para><note><para>If you use the <c>ProjectionExpression</c> parameter, then the value for <c>Select</c> can only be <c>SPECIFIC_ATTRIBUTES</c>. Any other value for <c>Select</c> will return an error.</para></note> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.InvokeDDBScanCmdlet.TableName"> <summary> <para> <para>The name of the table containing the requested items or if you provide <c>IndexName</c>, the name of the table to which that index belongs.</para><para>You can also provide the Amazon Resource Name (ARN) of the table in this parameter.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.InvokeDDBScanCmdlet.TotalSegment"> <summary> <para> <para>For a parallel <c>Scan</c> request, <c>TotalSegments</c> represents the total number of segments into which the <c>Scan</c> operation will be divided. The value of <c>TotalSegments</c> corresponds to the number of application workers that will perform the parallel scan. For example, if you want to use four application threads to scan a table or an index, specify a <c>TotalSegments</c> value of 4.</para><para>The value for <c>TotalSegments</c> must be greater than or equal to 1, and less than or equal to 1000000. If you specify a <c>TotalSegments</c> value of 1, the <c>Scan</c> operation will be sequential rather than parallel.</para><para>If you specify <c>TotalSegments</c>, you must also specify <c>Segment</c>.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.InvokeDDBScanCmdlet.ExclusiveStartKey"> <summary> <para> <para>The primary key of the first item that this operation will evaluate. Use the value that was returned for <c>LastEvaluatedKey</c> in the previous operation.</para><para>The data type for <c>ExclusiveStartKey</c> must be String, Number or Binary. No set data types are allowed.</para><para>In a parallel scan, a <c>Scan</c> request that includes <c>ExclusiveStartKey</c> must specify the same segment whose previous <c>Scan</c> returned the corresponding value of <c>LastEvaluatedKey</c>.</para> </para> <para> <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call. <br/>'ExclusiveStartKey' is only returned by the cmdlet when '-Select *' is specified. In order to manually control output pagination, set '-ExclusiveStartKey' to null for the first call then set the 'ExclusiveStartKey' using the same property output from the previous call for subsequent calls. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.InvokeDDBScanCmdlet.Limit"> <summary> <para> <para>The maximum number of items to evaluate (not necessarily the number of matching items). If DynamoDB processes the number of items up to the limit while processing the results, it stops the operation and returns the matching values up to that point, and a key in <c>LastEvaluatedKey</c> to apply in a subsequent operation, so that you can pick up where you left off. Also, if the processed dataset size exceeds 1 MB before DynamoDB reaches this limit, it stops the operation and returns the matching values up to the limit, and a key in <c>LastEvaluatedKey</c> to apply in a subsequent operation to continue the operation. For more information, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/QueryAndScan.html">Working with Queries</a> in the <i>Amazon DynamoDB Developer Guide</i>.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.InvokeDDBScanCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'Items'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DynamoDBv2.Model.ScanResponse). Specifying the name of a property of type Amazon.DynamoDBv2.Model.ScanResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.InvokeDDBScanCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the TableName parameter. The -PassThru parameter is deprecated, use -Select '^TableName' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.InvokeDDBScanCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.InvokeDDBScanCmdlet.NoAutoIteration"> <summary> By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of ExclusiveStartKey as the start point. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.DDB.NewDDBBackupCmdlet"> <summary> Creates a backup for an existing table. <para> Each time you create an on-demand backup, the entire table data is backed up. There is no limit to the number of on-demand backups that can be taken. </para><para> When you create an on-demand backup, a time marker of the request is cataloged, and the backup is created asynchronously, by applying all changes until the time of the request to the last full table snapshot. Backup requests are processed instantaneously and become available for restore within minutes. </para><para> You can call <c>CreateBackup</c> at a maximum rate of 50 times per second. </para><para> All backups in DynamoDB work without consuming any provisioned throughput on the table. </para><para> If you submit a backup request on 2018-12-14 at 14:25:00, the backup is guaranteed to contain all data committed to the table up to 14:24:00, and data committed after 14:26:00 will not be. The backup might contain data modifications made between 14:24:00 and 14:26:00. On-demand backup does not support causal consistency. </para><para> Along with data, the following are also included on the backups: </para><ul><li><para> Global secondary indexes (GSIs) </para></li><li><para> Local secondary indexes (LSIs) </para></li><li><para> Streams </para></li><li><para> Provisioned read and write capacity </para></li></ul> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.NewDDBBackupCmdlet.BackupName"> <summary> <para> <para>Specified name for the backup.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.NewDDBBackupCmdlet.TableName"> <summary> <para> <para>The name of the table. You can also provide the Amazon Resource Name (ARN) of the table in this parameter.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.NewDDBBackupCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'BackupDetails'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DynamoDBv2.Model.CreateBackupResponse). Specifying the name of a property of type Amazon.DynamoDBv2.Model.CreateBackupResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.NewDDBBackupCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the TableName parameter. The -PassThru parameter is deprecated, use -Select '^TableName' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.NewDDBBackupCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.DDB.NewDDBGlobalTableCmdlet"> <summary> Creates a global table from an existing table. A global table creates a replication relationship between two or more DynamoDB tables with the same table name in the provided Regions. <important><para> This documentation is for version 2017.11.29 (Legacy) of global tables, which should be avoided for new global tables. Customers should use <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/GlobalTables.html">Global Tables version 2019.11.21 (Current)</a> when possible, because it provides greater flexibility, higher efficiency, and consumes less write capacity than 2017.11.29 (Legacy). </para><para> To determine which version you're using, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/globaltables.DetermineVersion.html">Determining the global table version you are using</a>. To update existing global tables from version 2017.11.29 (Legacy) to version 2019.11.21 (Current), see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/V2globaltables_upgrade.html">Upgrading global tables</a>. </para></important><para> If you want to add a new replica table to a global table, each of the following conditions must be true: </para><ul><li><para> The table must have the same primary key as all of the other replicas. </para></li><li><para> The table must have the same name as all of the other replicas. </para></li><li><para> The table must have DynamoDB Streams enabled, with the stream containing both the new and the old images of the item. </para></li><li><para> None of the replica tables in the global table can contain any data. </para></li></ul><para> If global secondary indexes are specified, then the following conditions must also be met: </para><ul><li><para> The global secondary indexes must have the same name. </para></li><li><para> The global secondary indexes must have the same hash key and sort key (if present). </para></li></ul><para> If local secondary indexes are specified, then the following conditions must also be met: </para><ul><li><para> The local secondary indexes must have the same name. </para></li><li><para> The local secondary indexes must have the same hash key and sort key (if present). </para></li></ul><important><para> Write capacity settings should be set consistently across your replica tables and secondary indexes. DynamoDB strongly recommends enabling auto scaling to manage the write capacity settings for all of your global tables replicas and indexes. </para><para> If you prefer to manage write capacity settings manually, you should provision equal replicated write capacity units to your replica tables. You should also provision equal replicated write capacity units to matching secondary indexes across your global table. </para></important> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.NewDDBGlobalTableCmdlet.GlobalTableName"> <summary> <para> <para>The global table name.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.NewDDBGlobalTableCmdlet.ReplicationGroup"> <summary> <para> <para>The Regions where the global table needs to be created.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.NewDDBGlobalTableCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'GlobalTableDescription'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DynamoDBv2.Model.CreateGlobalTableResponse). Specifying the name of a property of type Amazon.DynamoDBv2.Model.CreateGlobalTableResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.NewDDBGlobalTableCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the GlobalTableName parameter. The -PassThru parameter is deprecated, use -Select '^GlobalTableName' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.NewDDBGlobalTableCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.DDB.RemoveDDBBackupCmdlet"> <summary> Deletes an existing backup of a table. <para> You can call <c>DeleteBackup</c> at a maximum rate of 10 times per second. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.RemoveDDBBackupCmdlet.BackupArn"> <summary> <para> <para>The ARN associated with the backup.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.RemoveDDBBackupCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'BackupDescription'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DynamoDBv2.Model.DeleteBackupResponse). Specifying the name of a property of type Amazon.DynamoDBv2.Model.DeleteBackupResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.RemoveDDBBackupCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the BackupArn parameter. The -PassThru parameter is deprecated, use -Select '^BackupArn' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.RemoveDDBBackupCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.DDB.RemoveDDBItemCmdlet"> <summary> Deletes a single item in a table by primary key. You can perform a conditional delete operation that deletes the item if it exists, or if it has an expected attribute value. <para> In addition to deleting an item, you can also return the item's attribute values in the same operation, using the <c>ReturnValues</c> parameter. </para><para> Unless you specify conditions, the <c>DeleteItem</c> is an idempotent operation; running it multiple times on the same item or attribute does <i>not</i> result in an error response. </para><para> Conditional deletes are useful for deleting items only if specific conditions are met. If those conditions are met, DynamoDB performs the delete. Otherwise, the item is not deleted. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.RemoveDDBItemCmdlet.ConditionalOperator"> <summary> <para> <para>This is a legacy parameter. Use <c>ConditionExpression</c> instead. For more information, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/LegacyConditionalParameters.ConditionalOperator.html">ConditionalOperator</a> in the <i>Amazon DynamoDB Developer Guide</i>.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.RemoveDDBItemCmdlet.ConditionExpression"> <summary> <para> <para>A condition that must be satisfied in order for a conditional <c>DeleteItem</c> to succeed.</para><para>An expression can contain any of the following:</para><ul><li><para>Functions: <c>attribute_exists | attribute_not_exists | attribute_type | contains | begins_with | size</c></para><para>These function names are case-sensitive.</para></li><li><para>Comparison operators: <c>= | <> | < | > | <= | >= | BETWEEN | IN </c></para></li><li><para> Logical operators: <c>AND | OR | NOT</c></para></li></ul><para>For more information about condition expressions, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Expressions.SpecifyingConditions.html">Condition Expressions</a> in the <i>Amazon DynamoDB Developer Guide</i>.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.RemoveDDBItemCmdlet.Expected"> <summary> <para> <para>This is a legacy parameter. Use <c>ConditionExpression</c> instead. For more information, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/LegacyConditionalParameters.Expected.html">Expected</a> in the <i>Amazon DynamoDB Developer Guide</i>.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.RemoveDDBItemCmdlet.ExpressionAttributeName"> <summary> <para> <para>One or more substitution tokens for attribute names in an expression. The following are some use cases for using <c>ExpressionAttributeNames</c>:</para><ul><li><para>To access an attribute whose name conflicts with a DynamoDB reserved word.</para></li><li><para>To create a placeholder for repeating occurrences of an attribute name in an expression.</para></li><li><para>To prevent special characters in an attribute name from being misinterpreted in an expression.</para></li></ul><para>Use the <b>#</b> character in an expression to dereference an attribute name. For example, consider the following attribute name:</para><ul><li><para><c>Percentile</c></para></li></ul><para>The name of this attribute conflicts with a reserved word, so it cannot be used directly in an expression. (For the complete list of reserved words, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/ReservedWords.html">Reserved Words</a> in the <i>Amazon DynamoDB Developer Guide</i>). To work around this, you could specify the following for <c>ExpressionAttributeNames</c>:</para><ul><li><para><c>{"#P":"Percentile"}</c></para></li></ul><para>You could then use this substitution in an expression, as in this example:</para><ul><li><para><c>#P = :val</c></para></li></ul><note><para>Tokens that begin with the <b>:</b> character are <i>expression attribute values</i>, which are placeholders for the actual value at runtime.</para></note><para>For more information on expression attribute names, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Expressions.AccessingItemAttributes.html">Specifying Item Attributes</a> in the <i>Amazon DynamoDB Developer Guide</i>.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.RemoveDDBItemCmdlet.ExpressionAttributeValue"> <summary> <para> <para>One or more values that can be substituted in an expression.</para><para>Use the <b>:</b> (colon) character in an expression to dereference an attribute value. For example, suppose that you wanted to check whether the value of the <i>ProductStatus</i> attribute was one of the following: </para><para><c>Available | Backordered | Discontinued</c></para><para>You would first need to specify <c>ExpressionAttributeValues</c> as follows:</para><para><c>{ ":avail":{"S":"Available"}, ":back":{"S":"Backordered"}, ":disc":{"S":"Discontinued"} }</c></para><para>You could then use these values in an expression, such as this:</para><para><c>ProductStatus IN (:avail, :back, :disc)</c></para><para>For more information on expression attribute values, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Expressions.SpecifyingConditions.html">Condition Expressions</a> in the <i>Amazon DynamoDB Developer Guide</i>.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.RemoveDDBItemCmdlet.Key"> <summary> <para> <para>A map of attribute names to <c>AttributeValue</c> objects, representing the primary key of the item to delete.</para><para>For the primary key, you must provide all of the key attributes. For example, with a simple primary key, you only need to provide a value for the partition key. For a composite primary key, you must provide values for both the partition key and the sort key.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.RemoveDDBItemCmdlet.ReturnConsumedCapacity"> <summary> <para> The service has not provided documentation for this parameter; please refer to the service's API reference documentation for the latest available information. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.RemoveDDBItemCmdlet.ReturnItemCollectionMetric"> <summary> <para> <para>Determines whether item collection metrics are returned. If set to <c>SIZE</c>, the response includes statistics about item collections, if any, that were modified during the operation are returned in the response. If set to <c>NONE</c> (the default), no statistics are returned.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.RemoveDDBItemCmdlet.ReturnValue"> <summary> <para> <para>Use <c>ReturnValues</c> if you want to get the item attributes as they appeared before they were deleted. For <c>DeleteItem</c>, the valid values are:</para><ul><li><para><c>NONE</c> - If <c>ReturnValues</c> is not specified, or if its value is <c>NONE</c>, then nothing is returned. (This setting is the default for <c>ReturnValues</c>.)</para></li><li><para><c>ALL_OLD</c> - The content of the old item is returned.</para></li></ul><para>There is no additional cost associated with requesting a return value aside from the small network and processing overhead of receiving a larger response. No read capacity units are consumed.</para><note><para>The <c>ReturnValues</c> parameter is used by several DynamoDB operations; however, <c>DeleteItem</c> does not recognize any values other than <c>NONE</c> or <c>ALL_OLD</c>.</para></note> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.RemoveDDBItemCmdlet.ReturnValuesOnConditionCheckFailure"> <summary> <para> <para>An optional parameter that returns the item attributes for a <c>DeleteItem</c> operation that failed a condition check.</para><para>There is no additional cost associated with requesting a return value aside from the small network and processing overhead of receiving a larger response. No read capacity units are consumed.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.RemoveDDBItemCmdlet.TableName"> <summary> <para> <para>The name of the table from which to delete the item. You can also provide the Amazon Resource Name (ARN) of the table in this parameter.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.RemoveDDBItemCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'Attributes'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DynamoDBv2.Model.DeleteItemResponse). Specifying the name of a property of type Amazon.DynamoDBv2.Model.DeleteItemResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.RemoveDDBItemCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the Key parameter. The -PassThru parameter is deprecated, use -Select '^Key' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.RemoveDDBItemCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.DDB.RemoveDDBResourcePolicyCmdlet"> <summary> Deletes the resource-based policy attached to the resource, which can be a table or stream. <para><c>DeleteResourcePolicy</c> is an idempotent operation; running it multiple times on the same resource <i>doesn't</i> result in an error response, unless you specify an <c>ExpectedRevisionId</c>, which will then return a <c>PolicyNotFoundException</c>. </para><important><para> To make sure that you don't inadvertently lock yourself out of your own resources, the root principal in your Amazon Web Services account can perform <c>DeleteResourcePolicy</c> requests, even if your resource-based policy explicitly denies the root principal's access. </para></important><note><para><c>DeleteResourcePolicy</c> is an asynchronous operation. If you issue a <c>GetResourcePolicy</c> request immediately after running the <c>DeleteResourcePolicy</c> request, DynamoDB might still return the deleted policy. This is because the policy for your resource might not have been deleted yet. Wait for a few seconds, and then try the <c>GetResourcePolicy</c> request again. </para></note> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.RemoveDDBResourcePolicyCmdlet.ExpectedRevisionId"> <summary> <para> <para>A string value that you can use to conditionally delete your policy. When you provide an expected revision ID, if the revision ID of the existing policy on the resource doesn't match or if there's no policy attached to the resource, the request will fail and return a <c>PolicyNotFoundException</c>.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.RemoveDDBResourcePolicyCmdlet.ResourceArn"> <summary> <para> <para>The Amazon Resource Name (ARN) of the DynamoDB resource from which the policy will be removed. The resources you can specify include tables and streams. If you remove the policy of a table, it will also remove the permissions for the table's indexes defined in that policy document. This is because index permissions are defined in the table's policy.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.RemoveDDBResourcePolicyCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'RevisionId'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DynamoDBv2.Model.DeleteResourcePolicyResponse). Specifying the name of a property of type Amazon.DynamoDBv2.Model.DeleteResourcePolicyResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.RemoveDDBResourcePolicyCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the ResourceArn parameter. The -PassThru parameter is deprecated, use -Select '^ResourceArn' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.RemoveDDBResourcePolicyCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.DDB.RemoveDDBResourceTagCmdlet"> <summary> Removes the association of tags from an Amazon DynamoDB resource. You can call <c>UntagResource</c> up to five times per second, per account. <ul><li><para><c>UntagResource</c> is an asynchronous operation. If you issue a <a>ListTagsOfResource</a> request immediately after an <c>UntagResource</c> request, DynamoDB might return your previous tag set, if there was one, or an empty tag set. This is because <c>ListTagsOfResource</c> uses an eventually consistent query, and the metadata for your tags or table might not be available at that moment. Wait for a few seconds, and then try the <c>ListTagsOfResource</c> request again. </para></li><li><para> The application or removal of tags using <c>TagResource</c> and <c>UntagResource</c> APIs is eventually consistent. <c>ListTagsOfResource</c> API will only reflect the changes after a few seconds. </para></li></ul><para> For an overview on tagging DynamoDB resources, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Tagging.html">Tagging for DynamoDB</a> in the <i>Amazon DynamoDB Developer Guide</i>. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.RemoveDDBResourceTagCmdlet.ResourceArn"> <summary> <para> <para>The DynamoDB resource that the tags will be removed from. This value is an Amazon Resource Name (ARN).</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.RemoveDDBResourceTagCmdlet.TagKey"> <summary> <para> <para>A list of tag keys. Existing tags of the resource whose keys are members of this list will be removed from the DynamoDB resource.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.RemoveDDBResourceTagCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DynamoDBv2.Model.UntagResourceResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.RemoveDDBResourceTagCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the ResourceArn parameter. The -PassThru parameter is deprecated, use -Select '^ResourceArn' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.RemoveDDBResourceTagCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.DDB.RemoveDDBTableCmdlet"> <summary> The <c>DeleteTable</c> operation deletes a table and all of its items. After a <c>DeleteTable</c> request, the specified table is in the <c>DELETING</c> state until DynamoDB completes the deletion. If the table is in the <c>ACTIVE</c> state, you can delete it. If a table is in <c>CREATING</c> or <c>UPDATING</c> states, then DynamoDB returns a <c>ResourceInUseException</c>. If the specified table does not exist, DynamoDB returns a <c>ResourceNotFoundException</c>. If table is already in the <c>DELETING</c> state, no error is returned. <important><para> For global tables, this operation only applies to global tables using Version 2019.11.21 (Current version). </para></important><note><para> DynamoDB might continue to accept data read and write operations, such as <c>GetItem</c> and <c>PutItem</c>, on a table in the <c>DELETING</c> state until the table deletion is complete. For the full list of table states, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/APIReference/API_TableDescription.html#DDB-Type-TableDescription-TableStatus">TableStatus</a>. </para></note><para> When you delete a table, any indexes on that table are also deleted. </para><para> If you have DynamoDB Streams enabled on the table, then the corresponding stream on that table goes into the <c>DISABLED</c> state, and the stream is automatically deleted after 24 hours. </para><para> Use the <c>DescribeTable</c> action to check the status of the table. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.RemoveDDBTableCmdlet.TableName"> <summary> <para> <para>The name of the table to delete. You can also provide the Amazon Resource Name (ARN) of the table in this parameter.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.RemoveDDBTableCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'TableDescription'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DynamoDBv2.Model.DeleteTableResponse). Specifying the name of a property of type Amazon.DynamoDBv2.Model.DeleteTableResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.RemoveDDBTableCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the TableName parameter. The -PassThru parameter is deprecated, use -Select '^TableName' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.RemoveDDBTableCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.DDB.RestoreDDBTableFromBackupCmdlet"> <summary> Creates a new table from an existing backup. Any number of users can execute up to 50 concurrent restores (any type of restore) in a given account. <para> You can call <c>RestoreTableFromBackup</c> at a maximum rate of 10 times per second. </para><para> You must manually set up the following on the restored table: </para><ul><li><para> Auto scaling policies </para></li><li><para> IAM policies </para></li><li><para> Amazon CloudWatch metrics and alarms </para></li><li><para> Tags </para></li><li><para> Stream settings </para></li><li><para> Time to Live (TTL) settings </para></li></ul> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.RestoreDDBTableFromBackupCmdlet.BackupArn"> <summary> <para> <para>The Amazon Resource Name (ARN) associated with the backup.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.RestoreDDBTableFromBackupCmdlet.BillingModeOverride"> <summary> <para> <para>The billing mode of the restored table.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.RestoreDDBTableFromBackupCmdlet.SSESpecificationOverride_Enabled"> <summary> <para> <para>Indicates whether server-side encryption is done using an Amazon Web Services managed key or an Amazon Web Services owned key. If enabled (true), server-side encryption type is set to <c>KMS</c> and an Amazon Web Services managed key is used (KMS charges apply). If disabled (false) or not specified, server-side encryption is set to Amazon Web Services owned key.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.RestoreDDBTableFromBackupCmdlet.GlobalSecondaryIndexOverride"> <summary> <para> <para>List of global secondary indexes for the restored table. The indexes provided should match existing secondary indexes. You can choose to exclude some or all of the indexes at the time of restore.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.RestoreDDBTableFromBackupCmdlet.SSESpecificationOverride_KMSMasterKeyId"> <summary> <para> <para>The KMS key that should be used for the KMS encryption. To specify a key, use its key ID, Amazon Resource Name (ARN), alias name, or alias ARN. Note that you should only provide this parameter if the key is different from the default DynamoDB key <c>alias/aws/dynamodb</c>.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.RestoreDDBTableFromBackupCmdlet.LocalSecondaryIndexOverride"> <summary> <para> <para>List of local secondary indexes for the restored table. The indexes provided should match existing secondary indexes. You can choose to exclude some or all of the indexes at the time of restore.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.RestoreDDBTableFromBackupCmdlet.OnDemandThroughputOverride_MaxReadRequestUnit"> <summary> <para> <para>Maximum number of read request units for the specified table.</para><para>To specify a maximum <c>OnDemandThroughput</c> on your table, set the value of <c>MaxReadRequestUnits</c> as greater than or equal to 1. To remove the maximum <c>OnDemandThroughput</c> that is currently set on your table, set the value of <c>MaxReadRequestUnits</c> to -1.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.RestoreDDBTableFromBackupCmdlet.OnDemandThroughputOverride_MaxWriteRequestUnit"> <summary> <para> <para>Maximum number of write request units for the specified table.</para><para>To specify a maximum <c>OnDemandThroughput</c> on your table, set the value of <c>MaxWriteRequestUnits</c> as greater than or equal to 1. To remove the maximum <c>OnDemandThroughput</c> that is currently set on your table, set the value of <c>MaxWriteRequestUnits</c> to -1.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.RestoreDDBTableFromBackupCmdlet.ProvisionedThroughputOverride_ReadCapacityUnit"> <summary> <para> <para>The maximum number of strongly consistent reads consumed per second before DynamoDB returns a <c>ThrottlingException</c>. For more information, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/ProvisionedThroughput.html">Specifying Read and Write Requirements</a> in the <i>Amazon DynamoDB Developer Guide</i>.</para><para>If read/write capacity mode is <c>PAY_PER_REQUEST</c> the value is set to 0.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.RestoreDDBTableFromBackupCmdlet.SSESpecificationOverride_SSEType"> <summary> <para> <para>Server-side encryption type. The only supported value is:</para><ul><li><para><c>KMS</c> - Server-side encryption that uses Key Management Service. The key is stored in your account and is managed by KMS (KMS charges apply).</para></li></ul> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.RestoreDDBTableFromBackupCmdlet.TargetTableName"> <summary> <para> <para>The name of the new table to which the backup must be restored.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.RestoreDDBTableFromBackupCmdlet.ProvisionedThroughputOverride_WriteCapacityUnit"> <summary> <para> <para>The maximum number of writes consumed per second before DynamoDB returns a <c>ThrottlingException</c>. For more information, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/ProvisionedThroughput.html">Specifying Read and Write Requirements</a> in the <i>Amazon DynamoDB Developer Guide</i>.</para><para>If read/write capacity mode is <c>PAY_PER_REQUEST</c> the value is set to 0.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.RestoreDDBTableFromBackupCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'TableDescription'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DynamoDBv2.Model.RestoreTableFromBackupResponse). Specifying the name of a property of type Amazon.DynamoDBv2.Model.RestoreTableFromBackupResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.RestoreDDBTableFromBackupCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the TargetTableName parameter. The -PassThru parameter is deprecated, use -Select '^TargetTableName' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.RestoreDDBTableFromBackupCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.DDB.RestoreDDBTableToPointInTimeCmdlet"> <summary> Restores the specified table to the specified point in time within <c>EarliestRestorableDateTime</c> and <c>LatestRestorableDateTime</c>. You can restore your table to any point in time during the last 35 days. Any number of users can execute up to 50 concurrent restores (any type of restore) in a given account. <para> When you restore using point in time recovery, DynamoDB restores your table data to the state based on the selected date and time (day:hour:minute:second) to a new table. </para><para> Along with data, the following are also included on the new restored table using point in time recovery: </para><ul><li><para> Global secondary indexes (GSIs) </para></li><li><para> Local secondary indexes (LSIs) </para></li><li><para> Provisioned read and write capacity </para></li><li><para> Encryption settings </para><important><para> All these settings come from the current settings of the source table at the time of restore. </para></important></li></ul><para> You must manually set up the following on the restored table: </para><ul><li><para> Auto scaling policies </para></li><li><para> IAM policies </para></li><li><para> Amazon CloudWatch metrics and alarms </para></li><li><para> Tags </para></li><li><para> Stream settings </para></li><li><para> Time to Live (TTL) settings </para></li><li><para> Point in time recovery settings </para></li></ul> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.RestoreDDBTableToPointInTimeCmdlet.BillingModeOverride"> <summary> <para> <para>The billing mode of the restored table.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.RestoreDDBTableToPointInTimeCmdlet.SSESpecificationOverride_Enabled"> <summary> <para> <para>Indicates whether server-side encryption is done using an Amazon Web Services managed key or an Amazon Web Services owned key. If enabled (true), server-side encryption type is set to <c>KMS</c> and an Amazon Web Services managed key is used (KMS charges apply). If disabled (false) or not specified, server-side encryption is set to Amazon Web Services owned key.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.RestoreDDBTableToPointInTimeCmdlet.GlobalSecondaryIndexOverride"> <summary> <para> <para>List of global secondary indexes for the restored table. The indexes provided should match existing secondary indexes. You can choose to exclude some or all of the indexes at the time of restore.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.RestoreDDBTableToPointInTimeCmdlet.SSESpecificationOverride_KMSMasterKeyId"> <summary> <para> <para>The KMS key that should be used for the KMS encryption. To specify a key, use its key ID, Amazon Resource Name (ARN), alias name, or alias ARN. Note that you should only provide this parameter if the key is different from the default DynamoDB key <c>alias/aws/dynamodb</c>.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.RestoreDDBTableToPointInTimeCmdlet.LocalSecondaryIndexOverride"> <summary> <para> <para>List of local secondary indexes for the restored table. The indexes provided should match existing secondary indexes. You can choose to exclude some or all of the indexes at the time of restore.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.RestoreDDBTableToPointInTimeCmdlet.OnDemandThroughputOverride_MaxReadRequestUnit"> <summary> <para> <para>Maximum number of read request units for the specified table.</para><para>To specify a maximum <c>OnDemandThroughput</c> on your table, set the value of <c>MaxReadRequestUnits</c> as greater than or equal to 1. To remove the maximum <c>OnDemandThroughput</c> that is currently set on your table, set the value of <c>MaxReadRequestUnits</c> to -1.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.RestoreDDBTableToPointInTimeCmdlet.OnDemandThroughputOverride_MaxWriteRequestUnit"> <summary> <para> <para>Maximum number of write request units for the specified table.</para><para>To specify a maximum <c>OnDemandThroughput</c> on your table, set the value of <c>MaxWriteRequestUnits</c> as greater than or equal to 1. To remove the maximum <c>OnDemandThroughput</c> that is currently set on your table, set the value of <c>MaxWriteRequestUnits</c> to -1.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.RestoreDDBTableToPointInTimeCmdlet.ProvisionedThroughputOverride_ReadCapacityUnit"> <summary> <para> <para>The maximum number of strongly consistent reads consumed per second before DynamoDB returns a <c>ThrottlingException</c>. For more information, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/ProvisionedThroughput.html">Specifying Read and Write Requirements</a> in the <i>Amazon DynamoDB Developer Guide</i>.</para><para>If read/write capacity mode is <c>PAY_PER_REQUEST</c> the value is set to 0.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.RestoreDDBTableToPointInTimeCmdlet.RestoreDateTime"> <summary> <para> <para>Time in the past to restore the table to.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.RestoreDDBTableToPointInTimeCmdlet.SourceTableArn"> <summary> <para> <para>The DynamoDB table that will be restored. This value is an Amazon Resource Name (ARN).</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.RestoreDDBTableToPointInTimeCmdlet.SourceTableName"> <summary> <para> <para>Name of the source table that is being restored.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.RestoreDDBTableToPointInTimeCmdlet.SSESpecificationOverride_SSEType"> <summary> <para> <para>Server-side encryption type. The only supported value is:</para><ul><li><para><c>KMS</c> - Server-side encryption that uses Key Management Service. The key is stored in your account and is managed by KMS (KMS charges apply).</para></li></ul> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.RestoreDDBTableToPointInTimeCmdlet.TargetTableName"> <summary> <para> <para>The name of the new table to which it must be restored to.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.RestoreDDBTableToPointInTimeCmdlet.UseLatestRestorableTime"> <summary> <para> <para>Restore the table to the latest possible time. <c>LatestRestorableDateTime</c> is typically 5 minutes before the current time. </para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.RestoreDDBTableToPointInTimeCmdlet.ProvisionedThroughputOverride_WriteCapacityUnit"> <summary> <para> <para>The maximum number of writes consumed per second before DynamoDB returns a <c>ThrottlingException</c>. For more information, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/ProvisionedThroughput.html">Specifying Read and Write Requirements</a> in the <i>Amazon DynamoDB Developer Guide</i>.</para><para>If read/write capacity mode is <c>PAY_PER_REQUEST</c> the value is set to 0.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.RestoreDDBTableToPointInTimeCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'TableDescription'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DynamoDBv2.Model.RestoreTableToPointInTimeResponse). Specifying the name of a property of type Amazon.DynamoDBv2.Model.RestoreTableToPointInTimeResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.RestoreDDBTableToPointInTimeCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the TargetTableName parameter. The -PassThru parameter is deprecated, use -Select '^TargetTableName' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.RestoreDDBTableToPointInTimeCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.DDB.SetDDBBatchItemCmdlet"> <summary> The <c>BatchWriteItem</c> operation puts or deletes multiple items in one or more tables. A single call to <c>BatchWriteItem</c> can transmit up to 16MB of data over the network, consisting of up to 25 item put or delete operations. While individual items can be up to 400 KB once stored, it's important to note that an item's representation might be greater than 400KB while being sent in DynamoDB's JSON format for the API call. For more details on this distinction, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/HowItWorks.NamingRulesDataTypes.html">Naming Rules and Data Types</a>. <note><para><c>BatchWriteItem</c> cannot update items. If you perform a <c>BatchWriteItem</c> operation on an existing item, that item's values will be overwritten by the operation and it will appear like it was updated. To update items, we recommend you use the <c>UpdateItem</c> action. </para></note><para> The individual <c>PutItem</c> and <c>DeleteItem</c> operations specified in <c>BatchWriteItem</c> are atomic; however <c>BatchWriteItem</c> as a whole is not. If any requested operations fail because the table's provisioned throughput is exceeded or an internal processing failure occurs, the failed operations are returned in the <c>UnprocessedItems</c> response parameter. You can investigate and optionally resend the requests. Typically, you would call <c>BatchWriteItem</c> in a loop. Each iteration would check for unprocessed items and submit a new <c>BatchWriteItem</c> request with those unprocessed items until all items have been processed. </para><para> For tables and indexes with provisioned capacity, if none of the items can be processed due to insufficient provisioned throughput on all of the tables in the request, then <c>BatchWriteItem</c> returns a <c>ProvisionedThroughputExceededException</c>. For all tables and indexes, if none of the items can be processed due to other throttling scenarios (such as exceeding partition level limits), then <c>BatchWriteItem</c> returns a <c>ThrottlingException</c>. </para><important><para> If DynamoDB returns any unprocessed items, you should retry the batch operation on those items. However, <i>we strongly recommend that you use an exponential backoff algorithm</i>. If you retry the batch operation immediately, the underlying read or write requests can still fail due to throttling on the individual tables. If you delay the batch operation using exponential backoff, the individual requests in the batch are much more likely to succeed. </para><para> For more information, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/ErrorHandling.html#Programming.Errors.BatchOperations">Batch Operations and Error Handling</a> in the <i>Amazon DynamoDB Developer Guide</i>. </para></important><para> With <c>BatchWriteItem</c>, you can efficiently write or delete large amounts of data, such as from Amazon EMR, or copy data from another database into DynamoDB. In order to improve performance with these large-scale operations, <c>BatchWriteItem</c> does not behave in the same way as individual <c>PutItem</c> and <c>DeleteItem</c> calls would. For example, you cannot specify conditions on individual put and delete requests, and <c>BatchWriteItem</c> does not return deleted items in the response. </para><para> If you use a programming language that supports concurrency, you can use threads to write items in parallel. Your application must include the necessary logic to manage the threads. With languages that don't support threading, you must update or delete the specified items one at a time. In both situations, <c>BatchWriteItem</c> performs the specified put and delete operations in parallel, giving you the power of the thread pool approach without having to introduce complexity into your application. </para><para> Parallel processing reduces latency, but each specified put and delete request consumes the same number of write capacity units whether it is processed in parallel or not. Delete operations on nonexistent items consume one write capacity unit. </para><para> If one or more of the following is true, DynamoDB rejects the entire batch write operation: </para><ul><li><para> One or more tables specified in the <c>BatchWriteItem</c> request does not exist. </para></li><li><para> Primary key attributes specified on an item in the request do not match those in the corresponding table's primary key schema. </para></li><li><para> You try to perform multiple operations on the same item in the same <c>BatchWriteItem</c> request. For example, you cannot put and delete the same item in the same <c>BatchWriteItem</c> request. </para></li><li><para> Your request contains at least two items with identical hash and range keys (which essentially is two put operations). </para></li><li><para> There are more than 25 requests in the batch. </para></li><li><para> Any individual item in a batch exceeds 400 KB. </para></li><li><para> The total request size exceeds 16 MB. </para></li><li><para> Any individual items with keys exceeding the key length limits. For a partition key, the limit is 2048 bytes and for a sort key, the limit is 1024 bytes. </para></li></ul> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.SetDDBBatchItemCmdlet.RequestItem"> <summary> <para> <para>A map of one or more table names or table ARNs and, for each table, a list of operations to be performed (<c>DeleteRequest</c> or <c>PutRequest</c>). Each element in the map consists of the following:</para><ul><li><para><c>DeleteRequest</c> - Perform a <c>DeleteItem</c> operation on the specified item. The item to be deleted is identified by a <c>Key</c> subelement:</para><ul><li><para><c>Key</c> - A map of primary key attribute values that uniquely identify the item. Each entry in this map consists of an attribute name and an attribute value. For each primary key, you must provide <i>all</i> of the key attributes. For example, with a simple primary key, you only need to provide a value for the partition key. For a composite primary key, you must provide values for <i>both</i> the partition key and the sort key.</para></li></ul></li><li><para><c>PutRequest</c> - Perform a <c>PutItem</c> operation on the specified item. The item to be put is identified by an <c>Item</c> subelement:</para><ul><li><para><c>Item</c> - A map of attributes and their values. Each entry in this map consists of an attribute name and an attribute value. Attribute values must not be null; string and binary type attributes must have lengths greater than zero; and set type attributes must not be empty. Requests that contain empty values are rejected with a <c>ValidationException</c> exception.</para><para>If you specify any attributes that are part of an index key, then the data types for those attributes must match those of the schema in the table's attribute definition.</para></li></ul></li></ul> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.SetDDBBatchItemCmdlet.ReturnConsumedCapacity"> <summary> <para> The service has not provided documentation for this parameter; please refer to the service's API reference documentation for the latest available information. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.SetDDBBatchItemCmdlet.ReturnItemCollectionMetric"> <summary> <para> <para>Determines whether item collection metrics are returned. If set to <c>SIZE</c>, the response includes statistics about item collections, if any, that were modified during the operation are returned in the response. If set to <c>NONE</c> (the default), no statistics are returned.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.SetDDBBatchItemCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'UnprocessedItems'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DynamoDBv2.Model.BatchWriteItemResponse). Specifying the name of a property of type Amazon.DynamoDBv2.Model.BatchWriteItemResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.SetDDBBatchItemCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the RequestItem parameter. The -PassThru parameter is deprecated, use -Select '^RequestItem' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.SetDDBBatchItemCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.DDB.SetDDBItemCmdlet"> <summary> Creates a new item, or replaces an old item with a new item. If an item that has the same primary key as the new item already exists in the specified table, the new item completely replaces the existing item. You can perform a conditional put operation (add a new item if one with the specified primary key doesn't exist), or replace an existing item if it has certain attribute values. You can return the item's attribute values in the same operation, using the <c>ReturnValues</c> parameter. <para> When you add an item, the primary key attributes are the only required attributes. </para><para> Empty String and Binary attribute values are allowed. Attribute values of type String and Binary must have a length greater than zero if the attribute is used as a key attribute for a table or index. Set type attributes cannot be empty. </para><para> Invalid Requests with empty values will be rejected with a <c>ValidationException</c> exception. </para><note><para> To prevent a new item from replacing an existing item, use a conditional expression that contains the <c>attribute_not_exists</c> function with the name of the attribute being used as the partition key for the table. Since every record must contain that attribute, the <c>attribute_not_exists</c> function will only succeed if no matching item exists. </para></note><para> For more information about <c>PutItem</c>, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/WorkingWithItems.html">Working with Items</a> in the <i>Amazon DynamoDB Developer Guide</i>. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.SetDDBItemCmdlet.ConditionalOperator"> <summary> <para> <para>This is a legacy parameter. Use <c>ConditionExpression</c> instead. For more information, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/LegacyConditionalParameters.ConditionalOperator.html">ConditionalOperator</a> in the <i>Amazon DynamoDB Developer Guide</i>.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.SetDDBItemCmdlet.ConditionExpression"> <summary> <para> <para>A condition that must be satisfied in order for a conditional <c>PutItem</c> operation to succeed.</para><para>An expression can contain any of the following:</para><ul><li><para>Functions: <c>attribute_exists | attribute_not_exists | attribute_type | contains | begins_with | size</c></para><para>These function names are case-sensitive.</para></li><li><para>Comparison operators: <c>= | <> | < | > | <= | >= | BETWEEN | IN </c></para></li><li><para> Logical operators: <c>AND | OR | NOT</c></para></li></ul><para>For more information on condition expressions, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Expressions.SpecifyingConditions.html">Condition Expressions</a> in the <i>Amazon DynamoDB Developer Guide</i>.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.SetDDBItemCmdlet.Expected"> <summary> <para> <para>This is a legacy parameter. Use <c>ConditionExpression</c> instead. For more information, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/LegacyConditionalParameters.Expected.html">Expected</a> in the <i>Amazon DynamoDB Developer Guide</i>.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.SetDDBItemCmdlet.ExpressionAttributeName"> <summary> <para> <para>One or more substitution tokens for attribute names in an expression. The following are some use cases for using <c>ExpressionAttributeNames</c>:</para><ul><li><para>To access an attribute whose name conflicts with a DynamoDB reserved word.</para></li><li><para>To create a placeholder for repeating occurrences of an attribute name in an expression.</para></li><li><para>To prevent special characters in an attribute name from being misinterpreted in an expression.</para></li></ul><para>Use the <b>#</b> character in an expression to dereference an attribute name. For example, consider the following attribute name:</para><ul><li><para><c>Percentile</c></para></li></ul><para>The name of this attribute conflicts with a reserved word, so it cannot be used directly in an expression. (For the complete list of reserved words, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/ReservedWords.html">Reserved Words</a> in the <i>Amazon DynamoDB Developer Guide</i>). To work around this, you could specify the following for <c>ExpressionAttributeNames</c>:</para><ul><li><para><c>{"#P":"Percentile"}</c></para></li></ul><para>You could then use this substitution in an expression, as in this example:</para><ul><li><para><c>#P = :val</c></para></li></ul><note><para>Tokens that begin with the <b>:</b> character are <i>expression attribute values</i>, which are placeholders for the actual value at runtime.</para></note><para>For more information on expression attribute names, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Expressions.AccessingItemAttributes.html">Specifying Item Attributes</a> in the <i>Amazon DynamoDB Developer Guide</i>.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.SetDDBItemCmdlet.ExpressionAttributeValue"> <summary> <para> <para>One or more values that can be substituted in an expression.</para><para>Use the <b>:</b> (colon) character in an expression to dereference an attribute value. For example, suppose that you wanted to check whether the value of the <i>ProductStatus</i> attribute was one of the following: </para><para><c>Available | Backordered | Discontinued</c></para><para>You would first need to specify <c>ExpressionAttributeValues</c> as follows:</para><para><c>{ ":avail":{"S":"Available"}, ":back":{"S":"Backordered"}, ":disc":{"S":"Discontinued"} }</c></para><para>You could then use these values in an expression, such as this:</para><para><c>ProductStatus IN (:avail, :back, :disc)</c></para><para>For more information on expression attribute values, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Expressions.SpecifyingConditions.html">Condition Expressions</a> in the <i>Amazon DynamoDB Developer Guide</i>.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.SetDDBItemCmdlet.Item"> <summary> <para> <para>A map of attribute name/value pairs, one for each attribute. Only the primary key attributes are required; you can optionally provide other attribute name-value pairs for the item.</para><para>You must provide all of the attributes for the primary key. For example, with a simple primary key, you only need to provide a value for the partition key. For a composite primary key, you must provide both values for both the partition key and the sort key.</para><para>If you specify any attributes that are part of an index key, then the data types for those attributes must match those of the schema in the table's attribute definition.</para><para>Empty String and Binary attribute values are allowed. Attribute values of type String and Binary must have a length greater than zero if the attribute is used as a key attribute for a table or index.</para><para>For more information about primary keys, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/HowItWorks.CoreComponents.html#HowItWorks.CoreComponents.PrimaryKey">Primary Key</a> in the <i>Amazon DynamoDB Developer Guide</i>.</para><para>Each element in the <c>Item</c> map is an <c>AttributeValue</c> object.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.SetDDBItemCmdlet.ReturnConsumedCapacity"> <summary> <para> The service has not provided documentation for this parameter; please refer to the service's API reference documentation for the latest available information. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.SetDDBItemCmdlet.ReturnItemCollectionMetric"> <summary> <para> <para>Determines whether item collection metrics are returned. If set to <c>SIZE</c>, the response includes statistics about item collections, if any, that were modified during the operation are returned in the response. If set to <c>NONE</c> (the default), no statistics are returned.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.SetDDBItemCmdlet.ReturnValue"> <summary> <para> <para>Use <c>ReturnValues</c> if you want to get the item attributes as they appeared before they were updated with the <c>PutItem</c> request. For <c>PutItem</c>, the valid values are:</para><ul><li><para><c>NONE</c> - If <c>ReturnValues</c> is not specified, or if its value is <c>NONE</c>, then nothing is returned. (This setting is the default for <c>ReturnValues</c>.)</para></li><li><para><c>ALL_OLD</c> - If <c>PutItem</c> overwrote an attribute name-value pair, then the content of the old item is returned.</para></li></ul><para>The values returned are strongly consistent.</para><para>There is no additional cost associated with requesting a return value aside from the small network and processing overhead of receiving a larger response. No read capacity units are consumed.</para><note><para>The <c>ReturnValues</c> parameter is used by several DynamoDB operations; however, <c>PutItem</c> does not recognize any values other than <c>NONE</c> or <c>ALL_OLD</c>.</para></note> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.SetDDBItemCmdlet.ReturnValuesOnConditionCheckFailure"> <summary> <para> <para>An optional parameter that returns the item attributes for a <c>PutItem</c> operation that failed a condition check.</para><para>There is no additional cost associated with requesting a return value aside from the small network and processing overhead of receiving a larger response. No read capacity units are consumed.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.SetDDBItemCmdlet.TableName"> <summary> <para> <para>The name of the table to contain the item. You can also provide the Amazon Resource Name (ARN) of the table in this parameter.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.SetDDBItemCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'Attributes'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DynamoDBv2.Model.PutItemResponse). Specifying the name of a property of type Amazon.DynamoDBv2.Model.PutItemResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.SetDDBItemCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the Item parameter. The -PassThru parameter is deprecated, use -Select '^Item' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.SetDDBItemCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.DDB.UpdateDDBContinuousBackupCmdlet"> <summary> <c>UpdateContinuousBackups</c> enables or disables point in time recovery for the specified table. A successful <c>UpdateContinuousBackups</c> call returns the current <c>ContinuousBackupsDescription</c>. Continuous backups are <c>ENABLED</c> on all tables at table creation. If point in time recovery is enabled, <c>PointInTimeRecoveryStatus</c> will be set to ENABLED. <para> Once continuous backups and point in time recovery are enabled, you can restore to any point in time within <c>EarliestRestorableDateTime</c> and <c>LatestRestorableDateTime</c>. </para><para><c>LatestRestorableDateTime</c> is typically 5 minutes before the current time. You can restore your table to any point in time during the last 35 days. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.UpdateDDBContinuousBackupCmdlet.PointInTimeRecoverySpecification_PointInTimeRecoveryEnabled"> <summary> <para> <para>Indicates whether point in time recovery is enabled (true) or disabled (false) on the table.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.UpdateDDBContinuousBackupCmdlet.TableName"> <summary> <para> <para>The name of the table. You can also provide the Amazon Resource Name (ARN) of the table in this parameter.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.UpdateDDBContinuousBackupCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'ContinuousBackupsDescription'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DynamoDBv2.Model.UpdateContinuousBackupsResponse). Specifying the name of a property of type Amazon.DynamoDBv2.Model.UpdateContinuousBackupsResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.UpdateDDBContinuousBackupCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the TableName parameter. The -PassThru parameter is deprecated, use -Select '^TableName' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.UpdateDDBContinuousBackupCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.DDB.UpdateDDBContributorInsightCmdlet"> <summary> Updates the status for contributor insights for a specific table or index. CloudWatch Contributor Insights for DynamoDB graphs display the partition key and (if applicable) sort key of frequently accessed items and frequently throttled items in plaintext. If you require the use of Amazon Web Services Key Management Service (KMS) to encrypt this table’s partition key and sort key data with an Amazon Web Services managed key or customer managed key, you should not enable CloudWatch Contributor Insights for DynamoDB for this table. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.UpdateDDBContributorInsightCmdlet.ContributorInsightsAction"> <summary> <para> <para>Represents the contributor insights action.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.UpdateDDBContributorInsightCmdlet.IndexName"> <summary> <para> <para>The global secondary index name, if applicable.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.UpdateDDBContributorInsightCmdlet.TableName"> <summary> <para> <para>The name of the table. You can also provide the Amazon Resource Name (ARN) of the table in this parameter.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.UpdateDDBContributorInsightCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is '*'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DynamoDBv2.Model.UpdateContributorInsightsResponse). Specifying the name of a property of type Amazon.DynamoDBv2.Model.UpdateContributorInsightsResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.UpdateDDBContributorInsightCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the TableName parameter. The -PassThru parameter is deprecated, use -Select '^TableName' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.UpdateDDBContributorInsightCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.DDB.UpdateDDBGlobalTableCmdlet"> <summary> Adds or removes replicas in the specified global table. The global table must already exist to be able to use this operation. Any replica to be added must be empty, have the same name as the global table, have the same key schema, have DynamoDB Streams enabled, and have the same provisioned and maximum write capacity units. <important><para> This documentation is for version 2017.11.29 (Legacy) of global tables, which should be avoided for new global tables. Customers should use <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/GlobalTables.html">Global Tables version 2019.11.21 (Current)</a> when possible, because it provides greater flexibility, higher efficiency, and consumes less write capacity than 2017.11.29 (Legacy). </para><para> To determine which version you're using, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/globaltables.DetermineVersion.html">Determining the global table version you are using</a>. To update existing global tables from version 2017.11.29 (Legacy) to version 2019.11.21 (Current), see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/V2globaltables_upgrade.html">Upgrading global tables</a>. </para></important><note><para> For global tables, this operation only applies to global tables using Version 2019.11.21 (Current version). If you are using global tables <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/GlobalTables.html">Version 2019.11.21</a> you can use <a href="https://docs.aws.amazon.com/amazondynamodb/latest/APIReference/API_UpdateTable.html">UpdateTable</a> instead. </para><para> Although you can use <c>UpdateGlobalTable</c> to add replicas and remove replicas in a single request, for simplicity we recommend that you issue separate requests for adding or removing replicas. </para></note><para> If global secondary indexes are specified, then the following conditions must also be met: </para><ul><li><para> The global secondary indexes must have the same name. </para></li><li><para> The global secondary indexes must have the same hash key and sort key (if present). </para></li><li><para> The global secondary indexes must have the same provisioned and maximum write capacity units. </para></li></ul> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.UpdateDDBGlobalTableCmdlet.GlobalTableName"> <summary> <para> <para>The global table name.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.UpdateDDBGlobalTableCmdlet.ReplicaUpdate"> <summary> <para> <para>A list of Regions that should be added or removed from the global table.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.UpdateDDBGlobalTableCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'GlobalTableDescription'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DynamoDBv2.Model.UpdateGlobalTableResponse). Specifying the name of a property of type Amazon.DynamoDBv2.Model.UpdateGlobalTableResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.UpdateDDBGlobalTableCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the GlobalTableName parameter. The -PassThru parameter is deprecated, use -Select '^GlobalTableName' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.UpdateDDBGlobalTableCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.DDB.UpdateDDBGlobalTableSettingCmdlet"> <summary> Updates settings for a global table. <important><para> This documentation is for version 2017.11.29 (Legacy) of global tables, which should be avoided for new global tables. Customers should use <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/GlobalTables.html">Global Tables version 2019.11.21 (Current)</a> when possible, because it provides greater flexibility, higher efficiency, and consumes less write capacity than 2017.11.29 (Legacy). </para><para> To determine which version you're using, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/globaltables.DetermineVersion.html">Determining the global table version you are using</a>. To update existing global tables from version 2017.11.29 (Legacy) to version 2019.11.21 (Current), see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/V2globaltables_upgrade.html">Upgrading global tables</a>. </para></important> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.UpdateDDBGlobalTableSettingCmdlet.GlobalTableBillingMode"> <summary> <para> <para>The billing mode of the global table. If <c>GlobalTableBillingMode</c> is not specified, the global table defaults to <c>PROVISIONED</c> capacity billing mode.</para><ul><li><para><c>PROVISIONED</c> - We recommend using <c>PROVISIONED</c> for predictable workloads. <c>PROVISIONED</c> sets the billing mode to <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/provisioned-capacity-mode.html">Provisioned capacity mode</a>.</para></li><li><para><c>PAY_PER_REQUEST</c> - We recommend using <c>PAY_PER_REQUEST</c> for unpredictable workloads. <c>PAY_PER_REQUEST</c> sets the billing mode to <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/on-demand-capacity-mode.html">On-demand capacity mode</a>. </para></li></ul> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.UpdateDDBGlobalTableSettingCmdlet.GlobalTableGlobalSecondaryIndexSettingsUpdate"> <summary> <para> <para>Represents the settings of a global secondary index for a global table that will be modified.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.UpdateDDBGlobalTableSettingCmdlet.GlobalTableName"> <summary> <para> <para>The name of the global table</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.UpdateDDBGlobalTableSettingCmdlet.GlobalTableProvisionedWriteCapacityAutoScalingSettingsUpdate"> <summary> <para> <para>Auto scaling settings for managing provisioned write capacity for the global table.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.UpdateDDBGlobalTableSettingCmdlet.GlobalTableProvisionedWriteCapacityUnit"> <summary> <para> <para>The maximum number of writes consumed per second before DynamoDB returns a <c>ThrottlingException.</c></para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.UpdateDDBGlobalTableSettingCmdlet.ReplicaSettingsUpdate"> <summary> <para> <para>Represents the settings for a global table in a Region that will be modified.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.UpdateDDBGlobalTableSettingCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is '*'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DynamoDBv2.Model.UpdateGlobalTableSettingsResponse). Specifying the name of a property of type Amazon.DynamoDBv2.Model.UpdateGlobalTableSettingsResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.UpdateDDBGlobalTableSettingCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the GlobalTableName parameter. The -PassThru parameter is deprecated, use -Select '^GlobalTableName' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.UpdateDDBGlobalTableSettingCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.DDB.UpdateDDBItemCmdlet"> <summary> Edits an existing item's attributes, or adds a new item to the table if it does not already exist. You can put, delete, or add attribute values. You can also perform a conditional update on an existing item (insert a new attribute name-value pair if it doesn't exist, or replace an existing name-value pair if it has certain expected attribute values). <para> You can also return the item's attribute values in the same <c>UpdateItem</c> operation using the <c>ReturnValues</c> parameter. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.UpdateDDBItemCmdlet.AttributeUpdate"> <summary> <para> <para>This is a legacy parameter. Use <c>UpdateExpression</c> instead. For more information, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/LegacyConditionalParameters.AttributeUpdates.html">AttributeUpdates</a> in the <i>Amazon DynamoDB Developer Guide</i>.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.UpdateDDBItemCmdlet.ConditionalOperator"> <summary> <para> <para>This is a legacy parameter. Use <c>ConditionExpression</c> instead. For more information, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/LegacyConditionalParameters.ConditionalOperator.html">ConditionalOperator</a> in the <i>Amazon DynamoDB Developer Guide</i>.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.UpdateDDBItemCmdlet.ConditionExpression"> <summary> <para> <para>A condition that must be satisfied in order for a conditional update to succeed.</para><para>An expression can contain any of the following:</para><ul><li><para>Functions: <c>attribute_exists | attribute_not_exists | attribute_type | contains | begins_with | size</c></para><para>These function names are case-sensitive.</para></li><li><para>Comparison operators: <c>= | <> | < | > | <= | >= | BETWEEN | IN </c></para></li><li><para> Logical operators: <c>AND | OR | NOT</c></para></li></ul><para>For more information about condition expressions, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Expressions.SpecifyingConditions.html">Specifying Conditions</a> in the <i>Amazon DynamoDB Developer Guide</i>.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.UpdateDDBItemCmdlet.Expected"> <summary> <para> <para>This is a legacy parameter. Use <c>ConditionExpression</c> instead. For more information, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/LegacyConditionalParameters.Expected.html">Expected</a> in the <i>Amazon DynamoDB Developer Guide</i>.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.UpdateDDBItemCmdlet.ExpressionAttributeName"> <summary> <para> <para>One or more substitution tokens for attribute names in an expression. The following are some use cases for using <c>ExpressionAttributeNames</c>:</para><ul><li><para>To access an attribute whose name conflicts with a DynamoDB reserved word.</para></li><li><para>To create a placeholder for repeating occurrences of an attribute name in an expression.</para></li><li><para>To prevent special characters in an attribute name from being misinterpreted in an expression.</para></li></ul><para>Use the <b>#</b> character in an expression to dereference an attribute name. For example, consider the following attribute name:</para><ul><li><para><c>Percentile</c></para></li></ul><para>The name of this attribute conflicts with a reserved word, so it cannot be used directly in an expression. (For the complete list of reserved words, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/ReservedWords.html">Reserved Words</a> in the <i>Amazon DynamoDB Developer Guide</i>.) To work around this, you could specify the following for <c>ExpressionAttributeNames</c>:</para><ul><li><para><c>{"#P":"Percentile"}</c></para></li></ul><para>You could then use this substitution in an expression, as in this example:</para><ul><li><para><c>#P = :val</c></para></li></ul><note><para>Tokens that begin with the <b>:</b> character are <i>expression attribute values</i>, which are placeholders for the actual value at runtime.</para></note><para>For more information about expression attribute names, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Expressions.AccessingItemAttributes.html">Specifying Item Attributes</a> in the <i>Amazon DynamoDB Developer Guide</i>.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.UpdateDDBItemCmdlet.ExpressionAttributeValue"> <summary> <para> <para>One or more values that can be substituted in an expression.</para><para>Use the <b>:</b> (colon) character in an expression to dereference an attribute value. For example, suppose that you wanted to check whether the value of the <c>ProductStatus</c> attribute was one of the following: </para><para><c>Available | Backordered | Discontinued</c></para><para>You would first need to specify <c>ExpressionAttributeValues</c> as follows:</para><para><c>{ ":avail":{"S":"Available"}, ":back":{"S":"Backordered"}, ":disc":{"S":"Discontinued"} }</c></para><para>You could then use these values in an expression, such as this:</para><para><c>ProductStatus IN (:avail, :back, :disc)</c></para><para>For more information on expression attribute values, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Expressions.SpecifyingConditions.html">Condition Expressions</a> in the <i>Amazon DynamoDB Developer Guide</i>.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.UpdateDDBItemCmdlet.Key"> <summary> <para> <para>The primary key of the item to be updated. Each element consists of an attribute name and a value for that attribute.</para><para>For the primary key, you must provide all of the attributes. For example, with a simple primary key, you only need to provide a value for the partition key. For a composite primary key, you must provide values for both the partition key and the sort key.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.UpdateDDBItemCmdlet.ReturnConsumedCapacity"> <summary> <para> The service has not provided documentation for this parameter; please refer to the service's API reference documentation for the latest available information. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.UpdateDDBItemCmdlet.ReturnItemCollectionMetric"> <summary> <para> <para>Determines whether item collection metrics are returned. If set to <c>SIZE</c>, the response includes statistics about item collections, if any, that were modified during the operation are returned in the response. If set to <c>NONE</c> (the default), no statistics are returned.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.UpdateDDBItemCmdlet.ReturnValue"> <summary> <para> <para>Use <c>ReturnValues</c> if you want to get the item attributes as they appear before or after they are successfully updated. For <c>UpdateItem</c>, the valid values are:</para><ul><li><para><c>NONE</c> - If <c>ReturnValues</c> is not specified, or if its value is <c>NONE</c>, then nothing is returned. (This setting is the default for <c>ReturnValues</c>.)</para></li><li><para><c>ALL_OLD</c> - Returns all of the attributes of the item, as they appeared before the UpdateItem operation.</para></li><li><para><c>UPDATED_OLD</c> - Returns only the updated attributes, as they appeared before the UpdateItem operation.</para></li><li><para><c>ALL_NEW</c> - Returns all of the attributes of the item, as they appear after the UpdateItem operation.</para></li><li><para><c>UPDATED_NEW</c> - Returns only the updated attributes, as they appear after the UpdateItem operation.</para></li></ul><para>There is no additional cost associated with requesting a return value aside from the small network and processing overhead of receiving a larger response. No read capacity units are consumed.</para><para>The values returned are strongly consistent.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.UpdateDDBItemCmdlet.ReturnValuesOnConditionCheckFailure"> <summary> <para> <para>An optional parameter that returns the item attributes for an <c>UpdateItem</c> operation that failed a condition check.</para><para>There is no additional cost associated with requesting a return value aside from the small network and processing overhead of receiving a larger response. No read capacity units are consumed.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.UpdateDDBItemCmdlet.TableName"> <summary> <para> <para>The name of the table containing the item to update. You can also provide the Amazon Resource Name (ARN) of the table in this parameter.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.UpdateDDBItemCmdlet.UpdateExpression"> <summary> <para> <para>An expression that defines one or more attributes to be updated, the action to be performed on them, and new values for them.</para><para>The following action values are available for <c>UpdateExpression</c>.</para><ul><li><para><c>SET</c> - Adds one or more attributes and values to an item. If any of these attributes already exist, they are replaced by the new values. You can also use <c>SET</c> to add or subtract from an attribute that is of type Number. For example: <c>SET myNum = myNum + :val</c></para><para><c>SET</c> supports the following functions:</para><ul><li><para><c>if_not_exists (path, operand)</c> - if the item does not contain an attribute at the specified path, then <c>if_not_exists</c> evaluates to operand; otherwise, it evaluates to path. You can use this function to avoid overwriting an attribute that may already be present in the item.</para></li><li><para><c>list_append (operand, operand)</c> - evaluates to a list with a new element added to it. You can append the new element to the start or the end of the list by reversing the order of the operands.</para></li></ul><para>These function names are case-sensitive.</para></li><li><para><c>REMOVE</c> - Removes one or more attributes from an item.</para></li><li><para><c>ADD</c> - Adds the specified value to the item, if the attribute does not already exist. If the attribute does exist, then the behavior of <c>ADD</c> depends on the data type of the attribute:</para><ul><li><para>If the existing attribute is a number, and if <c>Value</c> is also a number, then <c>Value</c> is mathematically added to the existing attribute. If <c>Value</c> is a negative number, then it is subtracted from the existing attribute.</para><note><para>If you use <c>ADD</c> to increment or decrement a number value for an item that doesn't exist before the update, DynamoDB uses <c>0</c> as the initial value.</para><para>Similarly, if you use <c>ADD</c> for an existing item to increment or decrement an attribute value that doesn't exist before the update, DynamoDB uses <c>0</c> as the initial value. For example, suppose that the item you want to update doesn't have an attribute named <c>itemcount</c>, but you decide to <c>ADD</c> the number <c>3</c> to this attribute anyway. DynamoDB will create the <c>itemcount</c> attribute, set its initial value to <c>0</c>, and finally add <c>3</c> to it. The result will be a new <c>itemcount</c> attribute in the item, with a value of <c>3</c>.</para></note></li><li><para>If the existing data type is a set and if <c>Value</c> is also a set, then <c>Value</c> is added to the existing set. For example, if the attribute value is the set <c>[1,2]</c>, and the <c>ADD</c> action specified <c>[3]</c>, then the final attribute value is <c>[1,2,3]</c>. An error occurs if an <c>ADD</c> action is specified for a set attribute and the attribute type specified does not match the existing set type. </para><para>Both sets must have the same primitive data type. For example, if the existing data type is a set of strings, the <c>Value</c> must also be a set of strings.</para></li></ul><important><para>The <c>ADD</c> action only supports Number and set data types. In addition, <c>ADD</c> can only be used on top-level attributes, not nested attributes.</para></important></li><li><para><c>DELETE</c> - Deletes an element from a set.</para><para>If a set of values is specified, then those values are subtracted from the old set. For example, if the attribute value was the set <c>[a,b,c]</c> and the <c>DELETE</c> action specifies <c>[a,c]</c>, then the final attribute value is <c>[b]</c>. Specifying an empty set is an error.</para><important><para>The <c>DELETE</c> action only supports set data types. In addition, <c>DELETE</c> can only be used on top-level attributes, not nested attributes.</para></important></li></ul><para>You can have many actions in a single expression, such as the following: <c>SET a=:value1, b=:value2 DELETE :value3, :value4, :value5</c></para><para>For more information on update expressions, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Expressions.Modifying.html">Modifying Items and Attributes</a> in the <i>Amazon DynamoDB Developer Guide</i>.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.UpdateDDBItemCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'Attributes'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DynamoDBv2.Model.UpdateItemResponse). Specifying the name of a property of type Amazon.DynamoDBv2.Model.UpdateItemResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.UpdateDDBItemCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the Key parameter. The -PassThru parameter is deprecated, use -Select '^Key' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.UpdateDDBItemCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.DDB.UpdateDDBKinesisStreamingDestinationCmdlet"> <summary> The command to update the Kinesis stream destination. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.UpdateDDBKinesisStreamingDestinationCmdlet.UpdateKinesisStreamingConfiguration_ApproximateCreationDateTimePrecision"> <summary> <para> <para>Enables updating the precision of Kinesis data stream timestamp. </para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.UpdateDDBKinesisStreamingDestinationCmdlet.StreamArn"> <summary> <para> <para>The Amazon Resource Name (ARN) for the Kinesis stream input.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.UpdateDDBKinesisStreamingDestinationCmdlet.TableName"> <summary> <para> <para>The table name for the Kinesis streaming destination input. You can also provide the ARN of the table in this parameter.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.UpdateDDBKinesisStreamingDestinationCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is '*'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DynamoDBv2.Model.UpdateKinesisStreamingDestinationResponse). Specifying the name of a property of type Amazon.DynamoDBv2.Model.UpdateKinesisStreamingDestinationResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.UpdateDDBKinesisStreamingDestinationCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the TableName parameter. The -PassThru parameter is deprecated, use -Select '^TableName' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.UpdateDDBKinesisStreamingDestinationCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.DDB.UpdateDDBTableCmdlet"> <summary> Modifies the provisioned throughput settings, global secondary indexes, or DynamoDB Streams settings for a given table. <important><para> For global tables, this operation only applies to global tables using Version 2019.11.21 (Current version). </para></important><para> You can only perform one of the following operations at once: </para><ul><li><para> Modify the provisioned throughput settings of the table. </para></li><li><para> Remove a global secondary index from the table. </para></li><li><para> Create a new global secondary index on the table. After the index begins backfilling, you can use <c>UpdateTable</c> to perform other operations. </para></li></ul><para><c>UpdateTable</c> is an asynchronous operation; while it's executing, the table status changes from <c>ACTIVE</c> to <c>UPDATING</c>. While it's <c>UPDATING</c>, you can't issue another <c>UpdateTable</c> request. When the table returns to the <c>ACTIVE</c> state, the <c>UpdateTable</c> operation is complete. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.UpdateDDBTableCmdlet.AttributeDefinition"> <summary> <para> <para>An array of attributes that describe the key schema for the table and indexes. If you are adding a new global secondary index to the table, <c>AttributeDefinitions</c> must include the key element(s) of the new index.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.UpdateDDBTableCmdlet.BillingMode"> <summary> <para> <para>Controls how you are charged for read and write throughput and how you manage capacity. When switching from pay-per-request to provisioned capacity, initial provisioned capacity values must be set. The initial provisioned capacity values are estimated based on the consumed read and write capacity of your table and global secondary indexes over the past 30 minutes.</para><ul><li><para><c>PROVISIONED</c> - We recommend using <c>PROVISIONED</c> for predictable workloads. <c>PROVISIONED</c> sets the billing mode to <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/provisioned-capacity-mode.html">Provisioned capacity mode</a>.</para></li><li><para><c>PAY_PER_REQUEST</c> - We recommend using <c>PAY_PER_REQUEST</c> for unpredictable workloads. <c>PAY_PER_REQUEST</c> sets the billing mode to <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/on-demand-capacity-mode.html">On-demand capacity mode</a>. </para></li></ul> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.UpdateDDBTableCmdlet.DeletionProtectionEnabled"> <summary> <para> <para>Indicates whether deletion protection is to be enabled (true) or disabled (false) on the table.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.UpdateDDBTableCmdlet.SSESpecification_Enabled"> <summary> <para> <para>Indicates whether server-side encryption is done using an Amazon Web Services managed key or an Amazon Web Services owned key. If enabled (true), server-side encryption type is set to <c>KMS</c> and an Amazon Web Services managed key is used (KMS charges apply). If disabled (false) or not specified, server-side encryption is set to Amazon Web Services owned key.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.UpdateDDBTableCmdlet.GlobalSecondaryIndexUpdate"> <summary> <para> <para>An array of one or more global secondary indexes for the table. For each index in the array, you can request one action:</para><ul><li><para><c>Create</c> - add a new global secondary index to the table.</para></li><li><para><c>Update</c> - modify the provisioned throughput settings of an existing global secondary index.</para></li><li><para><c>Delete</c> - remove a global secondary index from the table.</para></li></ul><para>You can create or delete only one global secondary index per <c>UpdateTable</c> operation.</para><para>For more information, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/GSI.OnlineOps.html">Managing Global Secondary Indexes</a> in the <i>Amazon DynamoDB Developer Guide</i>. </para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.UpdateDDBTableCmdlet.SSESpecification_KMSMasterKeyId"> <summary> <para> <para>The KMS key that should be used for the KMS encryption. To specify a key, use its key ID, Amazon Resource Name (ARN), alias name, or alias ARN. Note that you should only provide this parameter if the key is different from the default DynamoDB key <c>alias/aws/dynamodb</c>.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.UpdateDDBTableCmdlet.OnDemandThroughput_MaxReadRequestUnit"> <summary> <para> <para>Maximum number of read request units for the specified table.</para><para>To specify a maximum <c>OnDemandThroughput</c> on your table, set the value of <c>MaxReadRequestUnits</c> as greater than or equal to 1. To remove the maximum <c>OnDemandThroughput</c> that is currently set on your table, set the value of <c>MaxReadRequestUnits</c> to -1.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.UpdateDDBTableCmdlet.OnDemandThroughput_MaxWriteRequestUnit"> <summary> <para> <para>Maximum number of write request units for the specified table.</para><para>To specify a maximum <c>OnDemandThroughput</c> on your table, set the value of <c>MaxWriteRequestUnits</c> as greater than or equal to 1. To remove the maximum <c>OnDemandThroughput</c> that is currently set on your table, set the value of <c>MaxWriteRequestUnits</c> to -1.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.UpdateDDBTableCmdlet.ReadCapacity"> <summary> <para> <para>The maximum number of strongly consistent reads consumed per second before DynamoDB returns a <c>ThrottlingException</c>. For more information, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/ProvisionedThroughput.html">Specifying Read and Write Requirements</a> in the <i>Amazon DynamoDB Developer Guide</i>.</para><para>If read/write capacity mode is <c>PAY_PER_REQUEST</c> the value is set to 0.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.UpdateDDBTableCmdlet.ReplicaUpdate"> <summary> <para> <para>A list of replica update actions (create, delete, or update) for the table.</para><note><para>For global tables, this property only applies to global tables using Version 2019.11.21 (Current version). </para></note> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.UpdateDDBTableCmdlet.SSESpecification_SSEType"> <summary> <para> <para>Server-side encryption type. The only supported value is:</para><ul><li><para><c>KMS</c> - Server-side encryption that uses Key Management Service. The key is stored in your account and is managed by KMS (KMS charges apply).</para></li></ul> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.UpdateDDBTableCmdlet.StreamSpecification_StreamEnabled"> <summary> <para> <para>Indicates whether DynamoDB Streams is enabled (true) or disabled (false) on the table.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.UpdateDDBTableCmdlet.StreamSpecification_StreamViewType"> <summary> <para> <para> When an item in the table is modified, <c>StreamViewType</c> determines what information is written to the stream for this table. Valid values for <c>StreamViewType</c> are:</para><ul><li><para><c>KEYS_ONLY</c> - Only the key attributes of the modified item are written to the stream.</para></li><li><para><c>NEW_IMAGE</c> - The entire item, as it appears after it was modified, is written to the stream.</para></li><li><para><c>OLD_IMAGE</c> - The entire item, as it appeared before it was modified, is written to the stream.</para></li><li><para><c>NEW_AND_OLD_IMAGES</c> - Both the new and the old item images of the item are written to the stream.</para></li></ul> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.UpdateDDBTableCmdlet.TableClass"> <summary> <para> <para>The table class of the table to be updated. Valid values are <c>STANDARD</c> and <c>STANDARD_INFREQUENT_ACCESS</c>.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.UpdateDDBTableCmdlet.TableName"> <summary> <para> <para>The name of the table to be updated. You can also provide the Amazon Resource Name (ARN) of the table in this parameter.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.UpdateDDBTableCmdlet.WriteCapacity"> <summary> <para> <para>The maximum number of writes consumed per second before DynamoDB returns a <c>ThrottlingException</c>. For more information, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/ProvisionedThroughput.html">Specifying Read and Write Requirements</a> in the <i>Amazon DynamoDB Developer Guide</i>.</para><para>If read/write capacity mode is <c>PAY_PER_REQUEST</c> the value is set to 0.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.UpdateDDBTableCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'TableDescription'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DynamoDBv2.Model.UpdateTableResponse). Specifying the name of a property of type Amazon.DynamoDBv2.Model.UpdateTableResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.UpdateDDBTableCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the TableName parameter. The -PassThru parameter is deprecated, use -Select '^TableName' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.UpdateDDBTableCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.DDB.UpdateDDBTableReplicaAutoScalingCmdlet"> <summary> Updates auto scaling settings on your global tables at once. <important><para> For global tables, this operation only applies to global tables using Version 2019.11.21 (Current version). </para></important> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.UpdateDDBTableReplicaAutoScalingCmdlet.GlobalSecondaryIndexUpdate"> <summary> <para> <para>Represents the auto scaling settings of the global secondary indexes of the replica to be updated.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.UpdateDDBTableReplicaAutoScalingCmdlet.ProvisionedWriteCapacityAutoScalingUpdate"> <summary> <para> The service has not provided documentation for this parameter; please refer to the service's API reference documentation for the latest available information. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.UpdateDDBTableReplicaAutoScalingCmdlet.ReplicaUpdate"> <summary> <para> <para>Represents the auto scaling settings of replicas of the table that will be modified.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.UpdateDDBTableReplicaAutoScalingCmdlet.TableName"> <summary> <para> <para>The name of the global table to be updated. You can also provide the Amazon Resource Name (ARN) of the table in this parameter.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.UpdateDDBTableReplicaAutoScalingCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'TableAutoScalingDescription'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DynamoDBv2.Model.UpdateTableReplicaAutoScalingResponse). Specifying the name of a property of type Amazon.DynamoDBv2.Model.UpdateTableReplicaAutoScalingResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.UpdateDDBTableReplicaAutoScalingCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the TableName parameter. The -PassThru parameter is deprecated, use -Select '^TableName' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.UpdateDDBTableReplicaAutoScalingCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.DDB.UpdateDDBTimeToLiveCmdlet"> <summary> The <c>UpdateTimeToLive</c> method enables or disables Time to Live (TTL) for the specified table. A successful <c>UpdateTimeToLive</c> call returns the current <c>TimeToLiveSpecification</c>. It can take up to one hour for the change to fully process. Any additional <c>UpdateTimeToLive</c> calls for the same table during this one hour duration result in a <c>ValidationException</c>. <para> TTL compares the current time in epoch time format to the time stored in the TTL attribute of an item. If the epoch time value stored in the attribute is less than the current time, the item is marked as expired and subsequently deleted. </para><note><para> The epoch time format is the number of seconds elapsed since 12:00:00 AM January 1, 1970 UTC. </para></note><para> DynamoDB deletes expired items on a best-effort basis to ensure availability of throughput for other data operations. </para><important><para> DynamoDB typically deletes expired items within two days of expiration. The exact duration within which an item gets deleted after expiration is specific to the nature of the workload. Items that have expired and not been deleted will still show up in reads, queries, and scans. </para></important><para> As items are deleted, they are removed from any local secondary index and global secondary index immediately in the same eventually consistent way as a standard delete operation. </para><para> For more information, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/TTL.html">Time To Live</a> in the Amazon DynamoDB Developer Guide. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.UpdateDDBTimeToLiveCmdlet.TimeToLiveSpecification_AttributeName"> <summary> <para> <para>The name of the TTL attribute used to store the expiration time for items in the table.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.UpdateDDBTimeToLiveCmdlet.TimeToLiveSpecification_Enabled"> <summary> <para> <para>Indicates whether TTL is to be enabled (true) or disabled (false) on the table.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.UpdateDDBTimeToLiveCmdlet.TableName"> <summary> <para> <para>The name of the table to be configured. You can also provide the Amazon Resource Name (ARN) of the table in this parameter.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.UpdateDDBTimeToLiveCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'TimeToLiveSpecification'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DynamoDBv2.Model.UpdateTimeToLiveResponse). Specifying the name of a property of type Amazon.DynamoDBv2.Model.UpdateTimeToLiveResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.UpdateDDBTimeToLiveCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the TableName parameter. The -PassThru parameter is deprecated, use -Select '^TableName' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.UpdateDDBTimeToLiveCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.DDB.WriteDDBItemTransactionallyCmdlet"> <summary> <c>TransactWriteItems</c> is a synchronous write operation that groups up to 100 action requests. These actions can target items in different tables, but not in different Amazon Web Services accounts or Regions, and no two actions can target the same item. For example, you cannot both <c>ConditionCheck</c> and <c>Update</c> the same item. The aggregate size of the items in the transaction cannot exceed 4 MB. <para> The actions are completed atomically so that either all of them succeed, or all of them fail. They are defined by the following objects: </para><ul><li><para><c>Put</c> — Initiates a <c>PutItem</c> operation to write a new item. This structure specifies the primary key of the item to be written, the name of the table to write it in, an optional condition expression that must be satisfied for the write to succeed, a list of the item's attributes, and a field indicating whether to retrieve the item's attributes if the condition is not met. </para></li><li><para><c>Update</c> — Initiates an <c>UpdateItem</c> operation to update an existing item. This structure specifies the primary key of the item to be updated, the name of the table where it resides, an optional condition expression that must be satisfied for the update to succeed, an expression that defines one or more attributes to be updated, and a field indicating whether to retrieve the item's attributes if the condition is not met. </para></li><li><para><c>Delete</c> — Initiates a <c>DeleteItem</c> operation to delete an existing item. This structure specifies the primary key of the item to be deleted, the name of the table where it resides, an optional condition expression that must be satisfied for the deletion to succeed, and a field indicating whether to retrieve the item's attributes if the condition is not met. </para></li><li><para><c>ConditionCheck</c> — Applies a condition to an item that is not being modified by the transaction. This structure specifies the primary key of the item to be checked, the name of the table where it resides, a condition expression that must be satisfied for the transaction to succeed, and a field indicating whether to retrieve the item's attributes if the condition is not met. </para></li></ul><para> DynamoDB rejects the entire <c>TransactWriteItems</c> request if any of the following is true: </para><ul><li><para> A condition in one of the condition expressions is not met. </para></li><li><para> An ongoing operation is in the process of updating the same item. </para></li><li><para> There is insufficient provisioned capacity for the transaction to be completed. </para></li><li><para> An item size becomes too large (bigger than 400 KB), a local secondary index (LSI) becomes too large, or a similar validation error occurs because of changes made by the transaction. </para></li><li><para> The aggregate size of the items in the transaction exceeds 4 MB. </para></li><li><para> There is a user error, such as an invalid data format. </para></li></ul> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.WriteDDBItemTransactionallyCmdlet.ClientRequestToken"> <summary> <para> <para>Providing a <c>ClientRequestToken</c> makes the call to <c>TransactWriteItems</c> idempotent, meaning that multiple identical calls have the same effect as one single call.</para><para>Although multiple identical calls using the same client request token produce the same result on the server (no side effects), the responses to the calls might not be the same. If the <c>ReturnConsumedCapacity</c> parameter is set, then the initial <c>TransactWriteItems</c> call returns the amount of write capacity units consumed in making the changes. Subsequent <c>TransactWriteItems</c> calls with the same client token return the number of read capacity units consumed in reading the item.</para><para>A client request token is valid for 10 minutes after the first request that uses it is completed. After 10 minutes, any request with the same client token is treated as a new request. Do not resubmit the same request with the same client token for more than 10 minutes, or the result might not be idempotent.</para><para>If you submit a request with the same client token but a change in other parameters within the 10-minute idempotency window, DynamoDB returns an <c>IdempotentParameterMismatch</c> exception.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.WriteDDBItemTransactionallyCmdlet.ReturnConsumedCapacity"> <summary> <para> The service has not provided documentation for this parameter; please refer to the service's API reference documentation for the latest available information. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.WriteDDBItemTransactionallyCmdlet.ReturnItemCollectionMetric"> <summary> <para> <para>Determines whether item collection metrics are returned. If set to <c>SIZE</c>, the response includes statistics about item collections (if any), that were modified during the operation and are returned in the response. If set to <c>NONE</c> (the default), no statistics are returned. </para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.WriteDDBItemTransactionallyCmdlet.TransactItem"> <summary> <para> <para>An ordered array of up to 100 <c>TransactWriteItem</c> objects, each of which contains a <c>ConditionCheck</c>, <c>Put</c>, <c>Update</c>, or <c>Delete</c> object. These can operate on items in different tables, but the tables must reside in the same Amazon Web Services account and Region, and no two of them can operate on the same item. </para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.WriteDDBItemTransactionallyCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is '*'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DynamoDBv2.Model.TransactWriteItemsResponse). Specifying the name of a property of type Amazon.DynamoDBv2.Model.TransactWriteItemsResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.WriteDDBItemTransactionallyCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.DDB.WriteDDBResourcePolicyCmdlet"> <summary> Attaches a resource-based policy document to the resource, which can be a table or stream. When you attach a resource-based policy using this API, the policy application is <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/HowItWorks.ReadConsistency.html"><i>eventually consistent</i></a>. <para><c>PutResourcePolicy</c> is an idempotent operation; running it multiple times on the same resource using the same policy document will return the same revision ID. If you specify an <c>ExpectedRevisionId</c> that doesn't match the current policy's <c>RevisionId</c>, the <c>PolicyNotFoundException</c> will be returned. </para><note><para><c>PutResourcePolicy</c> is an asynchronous operation. If you issue a <c>GetResourcePolicy</c> request immediately after a <c>PutResourcePolicy</c> request, DynamoDB might return your previous policy, if there was one, or return the <c>PolicyNotFoundException</c>. This is because <c>GetResourcePolicy</c> uses an eventually consistent query, and the metadata for your policy or table might not be available at that moment. Wait for a few seconds, and then try the <c>GetResourcePolicy</c> request again. </para></note> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.WriteDDBResourcePolicyCmdlet.ConfirmRemoveSelfResourceAccess"> <summary> <para> <para>Set this parameter to <c>true</c> to confirm that you want to remove your permissions to change the policy of this resource in the future.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.WriteDDBResourcePolicyCmdlet.ExpectedRevisionId"> <summary> <para> <para>A string value that you can use to conditionally update your policy. You can provide the revision ID of your existing policy to make mutating requests against that policy.</para><note><para>When you provide an expected revision ID, if the revision ID of the existing policy on the resource doesn't match or if there's no policy attached to the resource, your request will be rejected with a <c>PolicyNotFoundException</c>.</para></note><para>To conditionally attach a policy when no policy exists for the resource, specify <c>NO_POLICY</c> for the revision ID.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.WriteDDBResourcePolicyCmdlet.Policy"> <summary> <para> <para>An Amazon Web Services resource-based policy document in JSON format.</para><ul><li><para>The maximum size supported for a resource-based policy document is 20 KB. DynamoDB counts whitespaces when calculating the size of a policy against this limit.</para></li><li><para>Within a resource-based policy, if the action for a DynamoDB service-linked role (SLR) to replicate data for a global table is denied, adding or deleting a replica will fail with an error.</para></li></ul><para>For a full list of all considerations that apply while attaching a resource-based policy, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/rbac-considerations.html">Resource-based policy considerations</a>.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.WriteDDBResourcePolicyCmdlet.ResourceArn"> <summary> <para> <para>The Amazon Resource Name (ARN) of the DynamoDB resource to which the policy will be attached. The resources you can specify include tables and streams.</para><para>You can control index permissions using the base table's policy. To specify the same permission level for your table and its indexes, you can provide both the table and index Amazon Resource Name (ARN)s in the <c>Resource</c> field of a given <c>Statement</c> in your policy document. Alternatively, to specify different permissions for your table, indexes, or both, you can define multiple <c>Statement</c> fields in your policy document.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.WriteDDBResourcePolicyCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'RevisionId'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DynamoDBv2.Model.PutResourcePolicyResponse). Specifying the name of a property of type Amazon.DynamoDBv2.Model.PutResourcePolicyResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.WriteDDBResourcePolicyCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the ResourceArn parameter. The -PassThru parameter is deprecated, use -Select '^ResourceArn' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.DDB.WriteDDBResourcePolicyCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.DDB.Model.TableSchema"> <summary> Model class carrying details of an Amazon DynamoDB table schema under construction for use with the New-DDBTable cmdlet. This class is accepted as pipeline input by the schema builder cmdlets (Write-DDBAttributeSchema, Write-DDBKeySchema and Write-DDBIndexSchema). </summary> </member> <member name="M:Amazon.PowerShell.Cmdlets.DDB.Model.TableSchema.#ctor(Amazon.PowerShell.Cmdlets.DDB.Model.TableSchema)"> <summary> Constructs a new table schema from a deep copy of the suppled object. Note that ICloneable is not supported on the coreclr platform, so we chose not to make the type derive from ICloneable but retained the Clone method. </summary> <param name="source"></param> </member> <member name="M:Amazon.PowerShell.Cmdlets.DDB.Model.TableSchema.SetLocalSecondaryIndex(System.String,System.String,System.String,System.String,System.String[])"> <summary> Adds a new local secondary index or updates an index if it has been defined already </summary> <param name="indexName"></param> <param name="rangeKeyName"></param> <param name="rangeKeyDataType"></param> <param name="projectionType"></param> <param name="nonKeyAttributes"></param> </member> <member name="M:Amazon.PowerShell.Cmdlets.DDB.Model.TableSchema.SetGlobalSecondaryIndex(System.String,System.String,System.String,System.String,System.String,System.Int64,System.Int64,System.String,System.String[])"> <summary> Adds a new global secondary index or updates an index if it has been defined already. </summary> <param name="indexName"></param> <param name="hashKeyName"></param> <param name="hashKeyDataType"></param> <param name="rangeKeyName"></param> <param name="rangeKeyDataType"></param> <param name="readCapacityUnits"></param> <param name="writeCapacityUnits"></param> <param name="projectionType"></param> <param name="nonKeyAttributes"></param> </member> </members> </doc> |