AWS.Tools.Drs.XML
|
<?xml version="1.0"?>
<doc> <assembly> <name>AWS.Tools.Drs</name> </assembly> <members> <member name="T:Amazon.PowerShell.Cmdlets.EDRS.AddEDRSResourceTagCmdlet"> <summary> Adds or overwrites only the specified tags for the specified Elastic Disaster Recovery resource or resources. When you specify an existing tag key, the value is overwritten with the new value. Each resource can have a maximum of 50 tags. Each tag consists of a key and optional value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.AddEDRSResourceTagCmdlet.ResourceArn"> <summary> <para> <para>ARN of the resource for which tags are to be added or updated.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.AddEDRSResourceTagCmdlet.Tag"> <summary> <para> <para>Array of tags to be added or updated.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.AddEDRSResourceTagCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Drs.Model.TagResourceResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.AddEDRSResourceTagCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the ResourceArn parameter. The -PassThru parameter is deprecated, use -Select '^ResourceArn' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.AddEDRSResourceTagCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.EDRS.DisconnectEDRSRecoveryInstanceCmdlet"> <summary> Disconnect a Recovery Instance from Elastic Disaster Recovery. Data replication is stopped immediately. All AWS resources created by Elastic Disaster Recovery for enabling the replication of the Recovery Instance will be terminated / deleted within 90 minutes. If the agent on the Recovery Instance has not been prevented from communicating with the Elastic Disaster Recovery service, then it will receive a command to uninstall itself (within approximately 10 minutes). The following properties of the Recovery Instance will be changed immediately: dataReplicationInfo.dataReplicationState will be set to DISCONNECTED; The totalStorageBytes property for each of dataReplicationInfo.replicatedDisks will be set to zero; dataReplicationInfo.lagDuration and dataReplicationInfo.lagDuration will be nullified. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.DisconnectEDRSRecoveryInstanceCmdlet.RecoveryInstanceID"> <summary> <para> <para>The ID of the Recovery Instance to disconnect.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.DisconnectEDRSRecoveryInstanceCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Drs.Model.DisconnectRecoveryInstanceResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.DisconnectEDRSRecoveryInstanceCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the RecoveryInstanceID parameter. The -PassThru parameter is deprecated, use -Select '^RecoveryInstanceID' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.DisconnectEDRSRecoveryInstanceCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.EDRS.DisconnectEDRSSourceServerCmdlet"> <summary> Disconnects a specific Source Server from Elastic Disaster Recovery. Data replication is stopped immediately. All AWS resources created by Elastic Disaster Recovery for enabling the replication of the Source Server will be terminated / deleted within 90 minutes. You cannot disconnect a Source Server if it has a Recovery Instance. If the agent on the Source Server has not been prevented from communicating with the Elastic Disaster Recovery service, then it will receive a command to uninstall itself (within approximately 10 minutes). The following properties of the SourceServer will be changed immediately: dataReplicationInfo.dataReplicationState will be set to DISCONNECTED; The totalStorageBytes property for each of dataReplicationInfo.replicatedDisks will be set to zero; dataReplicationInfo.lagDuration and dataReplicationInfo.lagDuration will be nullified. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.DisconnectEDRSSourceServerCmdlet.SourceServerID"> <summary> <para> <para>The ID of the Source Server to disconnect.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.DisconnectEDRSSourceServerCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is '*'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Drs.Model.DisconnectSourceServerResponse). Specifying the name of a property of type Amazon.Drs.Model.DisconnectSourceServerResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.DisconnectEDRSSourceServerCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the SourceServerID parameter. The -PassThru parameter is deprecated, use -Select '^SourceServerID' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.DisconnectEDRSSourceServerCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.EDRS.GetEDRSExtensibleSourceServerListCmdlet"> <summary> Returns a list of source servers on a staging account that are extensible, which means that: a. The source server is not already extended into this Account. b. The source server on the Account we’re reading from is not an extension of another source server. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.GetEDRSExtensibleSourceServerListCmdlet.StagingAccountID"> <summary> <para> <para>The Id of the staging Account to retrieve extensible source servers from.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.GetEDRSExtensibleSourceServerListCmdlet.MaxResult"> <summary> <para> <para>The maximum number of extensible source servers to retrieve.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.GetEDRSExtensibleSourceServerListCmdlet.NextToken"> <summary> <para> <para>The token of the next extensible source server to retrieve.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.GetEDRSExtensibleSourceServerListCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'Items'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Drs.Model.ListExtensibleSourceServersResponse). Specifying the name of a property of type Amazon.Drs.Model.ListExtensibleSourceServersResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.GetEDRSExtensibleSourceServerListCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the StagingAccountID parameter. The -PassThru parameter is deprecated, use -Select '^StagingAccountID' instead. This parameter will be removed in a future version. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.EDRS.GetEDRSFailbackReplicationConfigurationCmdlet"> <summary> Lists all Failback ReplicationConfigurations, filtered by Recovery Instance ID. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.GetEDRSFailbackReplicationConfigurationCmdlet.RecoveryInstanceID"> <summary> <para> <para>The ID of the Recovery Instance whose failback replication configuration should be returned.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.GetEDRSFailbackReplicationConfigurationCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is '*'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Drs.Model.GetFailbackReplicationConfigurationResponse). Specifying the name of a property of type Amazon.Drs.Model.GetFailbackReplicationConfigurationResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.GetEDRSFailbackReplicationConfigurationCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the RecoveryInstanceID parameter. The -PassThru parameter is deprecated, use -Select '^RecoveryInstanceID' instead. This parameter will be removed in a future version. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.EDRS.GetEDRSJobCmdlet"> <summary> Returns a list of Jobs. Use the JobsID and fromDate and toDate filters to limit which jobs are returned. The response is sorted by creationDataTime - latest date first. Jobs are created by the StartRecovery, TerminateRecoveryInstances and StartFailbackLaunch APIs. Jobs are also created by DiagnosticLaunch and TerminateDiagnosticInstances, which are APIs available only to *Support* and only used in response to relevant support tickets. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.GetEDRSJobCmdlet.Filters_FromDate"> <summary> <para> <para>The start date in a date range query.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.GetEDRSJobCmdlet.Filters_JobIDs"> <summary> <para> <para>An array of Job IDs that should be returned. An empty array means all jobs.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.GetEDRSJobCmdlet.Filters_ToDate"> <summary> <para> <para>The end date in a date range query.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.GetEDRSJobCmdlet.MaxResult"> <summary> <para> <para>Maximum number of Jobs to retrieve.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.GetEDRSJobCmdlet.NextToken"> <summary> <para> <para>The token of the next Job to retrieve.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.GetEDRSJobCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'Items'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Drs.Model.DescribeJobsResponse). Specifying the name of a property of type Amazon.Drs.Model.DescribeJobsResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.GetEDRSJobCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the Filters_JobIDs parameter. The -PassThru parameter is deprecated, use -Select '^Filters_JobIDs' instead. This parameter will be removed in a future version. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.EDRS.GetEDRSJobLogItemCmdlet"> <summary> Retrieves a detailed Job log with pagination. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.GetEDRSJobLogItemCmdlet.JobID"> <summary> <para> <para>The ID of the Job for which Job log items will be retrieved.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.GetEDRSJobLogItemCmdlet.MaxResult"> <summary> <para> <para>Maximum number of Job log items to retrieve.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.GetEDRSJobLogItemCmdlet.NextToken"> <summary> <para> <para>The token of the next Job log items to retrieve.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.GetEDRSJobLogItemCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'Items'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Drs.Model.DescribeJobLogItemsResponse). Specifying the name of a property of type Amazon.Drs.Model.DescribeJobLogItemsResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.GetEDRSJobLogItemCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the JobID parameter. The -PassThru parameter is deprecated, use -Select '^JobID' instead. This parameter will be removed in a future version. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.EDRS.GetEDRSLaunchConfigurationCmdlet"> <summary> Gets a LaunchConfiguration, filtered by Source Server IDs. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.GetEDRSLaunchConfigurationCmdlet.SourceServerID"> <summary> <para> <para>The ID of the Source Server that we want to retrieve a Launch Configuration for.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.GetEDRSLaunchConfigurationCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is '*'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Drs.Model.GetLaunchConfigurationResponse). Specifying the name of a property of type Amazon.Drs.Model.GetLaunchConfigurationResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.GetEDRSLaunchConfigurationCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the SourceServerID parameter. The -PassThru parameter is deprecated, use -Select '^SourceServerID' instead. This parameter will be removed in a future version. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.EDRS.GetEDRSRecoveryInstanceCmdlet"> <summary> Lists all Recovery Instances or multiple Recovery Instances by ID. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.GetEDRSRecoveryInstanceCmdlet.Filters_RecoveryInstanceIDs"> <summary> <para> <para>An array of Recovery Instance IDs that should be returned. An empty array means all Recovery Instances.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.GetEDRSRecoveryInstanceCmdlet.Filters_SourceServerIDs"> <summary> <para> <para>An array of Source Server IDs for which associated Recovery Instances should be returned.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.GetEDRSRecoveryInstanceCmdlet.MaxResult"> <summary> <para> <para>Maximum number of Recovery Instances to retrieve.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.GetEDRSRecoveryInstanceCmdlet.NextToken"> <summary> <para> <para>The token of the next Recovery Instance to retrieve.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.GetEDRSRecoveryInstanceCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'Items'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Drs.Model.DescribeRecoveryInstancesResponse). Specifying the name of a property of type Amazon.Drs.Model.DescribeRecoveryInstancesResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.EDRS.GetEDRSRecoverySnapshotCmdlet"> <summary> Lists all Recovery Snapshots for a single Source Server. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.GetEDRSRecoverySnapshotCmdlet.Filters_FromDateTime"> <summary> <para> <para>The start date in a date range query.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.GetEDRSRecoverySnapshotCmdlet.Order"> <summary> <para> <para>The sorted ordering by which to return Recovery Snapshots.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.GetEDRSRecoverySnapshotCmdlet.SourceServerID"> <summary> <para> <para>Filter Recovery Snapshots by Source Server ID.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.GetEDRSRecoverySnapshotCmdlet.Filters_ToDateTime"> <summary> <para> <para>The end date in a date range query.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.GetEDRSRecoverySnapshotCmdlet.MaxResult"> <summary> <para> <para>Maximum number of Recovery Snapshots to retrieve.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.GetEDRSRecoverySnapshotCmdlet.NextToken"> <summary> <para> <para>The token of the next Recovery Snapshot to retrieve.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.GetEDRSRecoverySnapshotCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'Items'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Drs.Model.DescribeRecoverySnapshotsResponse). Specifying the name of a property of type Amazon.Drs.Model.DescribeRecoverySnapshotsResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.GetEDRSRecoverySnapshotCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the SourceServerID parameter. The -PassThru parameter is deprecated, use -Select '^SourceServerID' instead. This parameter will be removed in a future version. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.EDRS.GetEDRSReplicationConfigurationCmdlet"> <summary> Gets a ReplicationConfiguration, filtered by Source Server ID. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.GetEDRSReplicationConfigurationCmdlet.SourceServerID"> <summary> <para> <para>The ID of the Source Serve for this Replication Configuration.r</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.GetEDRSReplicationConfigurationCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is '*'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Drs.Model.GetReplicationConfigurationResponse). Specifying the name of a property of type Amazon.Drs.Model.GetReplicationConfigurationResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.GetEDRSReplicationConfigurationCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the SourceServerID parameter. The -PassThru parameter is deprecated, use -Select '^SourceServerID' instead. This parameter will be removed in a future version. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.EDRS.GetEDRSReplicationConfigurationTemplateCmdlet"> <summary> Lists all ReplicationConfigurationTemplates, filtered by Source Server IDs. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.GetEDRSReplicationConfigurationTemplateCmdlet.ReplicationConfigurationTemplateIDs"> <summary> <para> <para>The IDs of the Replication Configuration Templates to retrieve. An empty list means all Replication Configuration Templates.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.GetEDRSReplicationConfigurationTemplateCmdlet.MaxResult"> <summary> <para> <para>Maximum number of Replication Configuration Templates to retrieve.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.GetEDRSReplicationConfigurationTemplateCmdlet.NextToken"> <summary> <para> <para>The token of the next Replication Configuration Template to retrieve.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.GetEDRSReplicationConfigurationTemplateCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'Items'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Drs.Model.DescribeReplicationConfigurationTemplatesResponse). Specifying the name of a property of type Amazon.Drs.Model.DescribeReplicationConfigurationTemplatesResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.EDRS.GetEDRSResourceTagCmdlet"> <summary> List all tags for your Elastic Disaster Recovery resources. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.GetEDRSResourceTagCmdlet.ResourceArn"> <summary> <para> <para>The ARN of the resource whose tags should be returned.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.GetEDRSResourceTagCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'Tags'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Drs.Model.ListTagsForResourceResponse). Specifying the name of a property of type Amazon.Drs.Model.ListTagsForResourceResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.GetEDRSResourceTagCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the ResourceArn parameter. The -PassThru parameter is deprecated, use -Select '^ResourceArn' instead. This parameter will be removed in a future version. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.EDRS.GetEDRSSourceServerCmdlet"> <summary> Lists all Source Servers or multiple Source Servers filtered by ID. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.GetEDRSSourceServerCmdlet.Filters_HardwareId"> <summary> <para> <para>An ID that describes the hardware of the Source Server. This is either an EC2 instance id, a VMware uuid or a mac address.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.GetEDRSSourceServerCmdlet.Filters_SourceServerIDs"> <summary> <para> <para>An array of Source Servers IDs that should be returned. An empty array means all Source Servers.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.GetEDRSSourceServerCmdlet.Filters_StagingAccountIDs"> <summary> <para> <para>An array of staging account IDs that extended source servers belong to. An empty array means all source servers will be shown.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.GetEDRSSourceServerCmdlet.MaxResult"> <summary> <para> <para>Maximum number of Source Servers to retrieve.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.GetEDRSSourceServerCmdlet.NextToken"> <summary> <para> <para>The token of the next Source Server to retrieve.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.GetEDRSSourceServerCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'Items'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Drs.Model.DescribeSourceServersResponse). Specifying the name of a property of type Amazon.Drs.Model.DescribeSourceServersResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.GetEDRSSourceServerCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the Filters_HardwareId parameter. The -PassThru parameter is deprecated, use -Select '^Filters_HardwareId' instead. This parameter will be removed in a future version. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.EDRS.GetEDRSStagingAccountListCmdlet"> <summary> Returns an array of staging accounts for existing extended source servers. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.GetEDRSStagingAccountListCmdlet.MaxResult"> <summary> <para> <para>The maximum number of staging Accounts to retrieve.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.GetEDRSStagingAccountListCmdlet.NextToken"> <summary> <para> <para>The token of the next staging Account to retrieve.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.GetEDRSStagingAccountListCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'Accounts'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Drs.Model.ListStagingAccountsResponse). Specifying the name of a property of type Amazon.Drs.Model.ListStagingAccountsResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.EDRS.InitializeEDRSServiceCmdlet"> <summary> Initialize Elastic Disaster Recovery. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.InitializeEDRSServiceCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Drs.Model.InitializeServiceResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.InitializeEDRSServiceCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.EDRS.NewEDRSExtendedSourceServerCmdlet"> <summary> Create an extended source server in the target Account based on the source server in staging account. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.NewEDRSExtendedSourceServerCmdlet.SourceServerArn"> <summary> <para> <para>This defines the ARN of the source server in staging Account based on which you want to create an extended source server.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.NewEDRSExtendedSourceServerCmdlet.Tag"> <summary> <para> <para>A list of tags associated with the extended source server.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.NewEDRSExtendedSourceServerCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'SourceServer'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Drs.Model.CreateExtendedSourceServerResponse). Specifying the name of a property of type Amazon.Drs.Model.CreateExtendedSourceServerResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.NewEDRSExtendedSourceServerCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the SourceServerArn parameter. The -PassThru parameter is deprecated, use -Select '^SourceServerArn' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.NewEDRSExtendedSourceServerCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.EDRS.NewEDRSReplicationConfigurationTemplateCmdlet"> <summary> Creates a new ReplicationConfigurationTemplate. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.NewEDRSReplicationConfigurationTemplateCmdlet.AssociateDefaultSecurityGroup"> <summary> <para> <para>Whether to associate the default Elastic Disaster Recovery Security group with the Replication Configuration Template.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.NewEDRSReplicationConfigurationTemplateCmdlet.BandwidthThrottling"> <summary> <para> <para>Configure bandwidth throttling for the outbound data transfer rate of the Source Server in Mbps.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.NewEDRSReplicationConfigurationTemplateCmdlet.CreatePublicIP"> <summary> <para> <para>Whether to create a Public IP for the Recovery Instance by default.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.NewEDRSReplicationConfigurationTemplateCmdlet.DataPlaneRouting"> <summary> <para> <para>The data plane routing mechanism that will be used for replication.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.NewEDRSReplicationConfigurationTemplateCmdlet.DefaultLargeStagingDiskType"> <summary> <para> <para>The Staging Disk EBS volume type to be used during replication.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.NewEDRSReplicationConfigurationTemplateCmdlet.EbsEncryption"> <summary> <para> <para>The type of EBS encryption to be used during replication.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.NewEDRSReplicationConfigurationTemplateCmdlet.EbsEncryptionKeyArn"> <summary> <para> <para>The ARN of the EBS encryption key to be used during replication.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.NewEDRSReplicationConfigurationTemplateCmdlet.PitPolicy"> <summary> <para> <para>The Point in time (PIT) policy to manage snapshots taken during replication.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.NewEDRSReplicationConfigurationTemplateCmdlet.ReplicationServerInstanceType"> <summary> <para> <para>The instance type to be used for the replication server.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.NewEDRSReplicationConfigurationTemplateCmdlet.ReplicationServersSecurityGroupsIDs"> <summary> <para> <para>The security group IDs that will be used by the replication server.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.NewEDRSReplicationConfigurationTemplateCmdlet.StagingAreaSubnetId"> <summary> <para> <para>The subnet to be used by the replication staging area.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.NewEDRSReplicationConfigurationTemplateCmdlet.StagingAreaTag"> <summary> <para> <para>A set of tags to be associated with all resources created in the replication staging area: EC2 replication server, EBS volumes, EBS snapshots, etc.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.NewEDRSReplicationConfigurationTemplateCmdlet.Tag"> <summary> <para> <para>A set of tags to be associated with the Replication Configuration Template resource.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.NewEDRSReplicationConfigurationTemplateCmdlet.UseDedicatedReplicationServer"> <summary> <para> <para>Whether to use a dedicated Replication Server in the replication staging area.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.NewEDRSReplicationConfigurationTemplateCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is '*'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Drs.Model.CreateReplicationConfigurationTemplateResponse). Specifying the name of a property of type Amazon.Drs.Model.CreateReplicationConfigurationTemplateResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.NewEDRSReplicationConfigurationTemplateCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.EDRS.RemoveEDRSJobCmdlet"> <summary> Deletes a single Job by ID. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.RemoveEDRSJobCmdlet.JobID"> <summary> <para> <para>The ID of the Job to be deleted.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.RemoveEDRSJobCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Drs.Model.DeleteJobResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.RemoveEDRSJobCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the JobID parameter. The -PassThru parameter is deprecated, use -Select '^JobID' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.RemoveEDRSJobCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.EDRS.RemoveEDRSRecoveryInstanceCmdlet"> <summary> Deletes a single Recovery Instance by ID. This deletes the Recovery Instance resource from Elastic Disaster Recovery. The Recovery Instance must be disconnected first in order to delete it. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.RemoveEDRSRecoveryInstanceCmdlet.RecoveryInstanceID"> <summary> <para> <para>RThe ID of the Recovery Instance to be deleted.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.RemoveEDRSRecoveryInstanceCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Drs.Model.DeleteRecoveryInstanceResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.RemoveEDRSRecoveryInstanceCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the RecoveryInstanceID parameter. The -PassThru parameter is deprecated, use -Select '^RecoveryInstanceID' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.RemoveEDRSRecoveryInstanceCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.EDRS.RemoveEDRSReplicationConfigurationTemplateCmdlet"> <summary> Deletes a single Replication Configuration Template by ID </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.RemoveEDRSReplicationConfigurationTemplateCmdlet.ReplicationConfigurationTemplateID"> <summary> <para> <para>The ID of the Replication Configuration Template to be deleted.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.RemoveEDRSReplicationConfigurationTemplateCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Drs.Model.DeleteReplicationConfigurationTemplateResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.RemoveEDRSReplicationConfigurationTemplateCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the ReplicationConfigurationTemplateID parameter. The -PassThru parameter is deprecated, use -Select '^ReplicationConfigurationTemplateID' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.RemoveEDRSReplicationConfigurationTemplateCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.EDRS.RemoveEDRSResourceTagCmdlet"> <summary> Deletes the specified set of tags from the specified set of Elastic Disaster Recovery resources. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.RemoveEDRSResourceTagCmdlet.ResourceArn"> <summary> <para> <para>ARN of the resource for which tags are to be removed.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.RemoveEDRSResourceTagCmdlet.TagKey"> <summary> <para> <para>Array of tags to be removed.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.RemoveEDRSResourceTagCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Drs.Model.UntagResourceResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.RemoveEDRSResourceTagCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the ResourceArn parameter. The -PassThru parameter is deprecated, use -Select '^ResourceArn' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.RemoveEDRSResourceTagCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.EDRS.RemoveEDRSSourceServerCmdlet"> <summary> Deletes a single Source Server by ID. The Source Server must be disconnected first. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.RemoveEDRSSourceServerCmdlet.SourceServerID"> <summary> <para> <para>The ID of the Source Server to be deleted.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.RemoveEDRSSourceServerCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Drs.Model.DeleteSourceServerResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.RemoveEDRSSourceServerCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the SourceServerID parameter. The -PassThru parameter is deprecated, use -Select '^SourceServerID' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.RemoveEDRSSourceServerCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.EDRS.RestartEDRSDataReplicationCmdlet"> <summary> Causes the data replication initiation sequence to begin immediately upon next Handshake for the specified Source Server ID, regardless of when the previous initiation started. This command will work only if the Source Server is stalled or is in a DISCONNECTED or STOPPED state. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.RestartEDRSDataReplicationCmdlet.SourceServerID"> <summary> <para> <para>The ID of the Source Server whose data replication should be retried.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.RestartEDRSDataReplicationCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is '*'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Drs.Model.RetryDataReplicationResponse). Specifying the name of a property of type Amazon.Drs.Model.RetryDataReplicationResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.RestartEDRSDataReplicationCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the SourceServerID parameter. The -PassThru parameter is deprecated, use -Select '^SourceServerID' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.RestartEDRSDataReplicationCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.EDRS.StartEDRSFailbackLaunchCmdlet"> <summary> Initiates a Job for launching the machine that is being failed back to from the specified Recovery Instance. This will run conversion on the failback client and will reboot your machine, thus completing the failback process. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.StartEDRSFailbackLaunchCmdlet.RecoveryInstanceIDs"> <summary> <para> <para>The IDs of the Recovery Instance whose failback launch we want to request.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.StartEDRSFailbackLaunchCmdlet.Tag"> <summary> <para> <para>The tags to be associated with the failback launch Job.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.StartEDRSFailbackLaunchCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'Job'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Drs.Model.StartFailbackLaunchResponse). Specifying the name of a property of type Amazon.Drs.Model.StartFailbackLaunchResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.StartEDRSFailbackLaunchCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.EDRS.StartEDRSRecoveryCmdlet"> <summary> Launches Recovery Instances for the specified Source Servers. For each Source Server you may choose a point in time snapshot to launch from, or use an on demand snapshot. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.StartEDRSRecoveryCmdlet.IsDrill"> <summary> <para> <para>Whether this Source Server Recovery operation is a drill or not.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.StartEDRSRecoveryCmdlet.SourceServer"> <summary> <para> <para>The Source Servers that we want to start a Recovery Job for.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.StartEDRSRecoveryCmdlet.Tag"> <summary> <para> <para>The tags to be associated with the Recovery Job.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.StartEDRSRecoveryCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'Job'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Drs.Model.StartRecoveryResponse). Specifying the name of a property of type Amazon.Drs.Model.StartRecoveryResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.StartEDRSRecoveryCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the IsDrill parameter. The -PassThru parameter is deprecated, use -Select '^IsDrill' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.StartEDRSRecoveryCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.EDRS.StopEDRSFailbackCmdlet"> <summary> Stops the failback process for a specified Recovery Instance. This changes the Failback State of the Recovery Instance back to FAILBACK_NOT_STARTED. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.StopEDRSFailbackCmdlet.RecoveryInstanceID"> <summary> <para> <para>The ID of the Recovery Instance we want to stop failback for.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.StopEDRSFailbackCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Drs.Model.StopFailbackResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.StopEDRSFailbackCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the RecoveryInstanceID parameter. The -PassThru parameter is deprecated, use -Select '^RecoveryInstanceID' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.StopEDRSFailbackCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.EDRS.StopEDRSRecoveryInstanceCmdlet"> <summary> Initiates a Job for terminating the EC2 resources associated with the specified Recovery Instances, and then will delete the Recovery Instances from the Elastic Disaster Recovery service. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.StopEDRSRecoveryInstanceCmdlet.RecoveryInstanceIDs"> <summary> <para> <para>The IDs of the Recovery Instances that should be terminated.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.StopEDRSRecoveryInstanceCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'Job'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Drs.Model.TerminateRecoveryInstancesResponse). Specifying the name of a property of type Amazon.Drs.Model.TerminateRecoveryInstancesResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.StopEDRSRecoveryInstanceCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.EDRS.UpdateEDRSFailbackReplicationConfigurationCmdlet"> <summary> Allows you to update the failback replication configuration of a Recovery Instance by ID. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.UpdateEDRSFailbackReplicationConfigurationCmdlet.BandwidthThrottling"> <summary> <para> <para>Configure bandwidth throttling for the outbound data transfer rate of the Recovery Instance in Mbps.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.UpdateEDRSFailbackReplicationConfigurationCmdlet.Name"> <summary> <para> <para>The name of the Failback Replication Configuration.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.UpdateEDRSFailbackReplicationConfigurationCmdlet.RecoveryInstanceID"> <summary> <para> <para>The ID of the Recovery Instance.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.UpdateEDRSFailbackReplicationConfigurationCmdlet.UsePrivateIP"> <summary> <para> <para>Whether to use Private IP for the failback replication of the Recovery Instance.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.UpdateEDRSFailbackReplicationConfigurationCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Drs.Model.UpdateFailbackReplicationConfigurationResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.UpdateEDRSFailbackReplicationConfigurationCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the RecoveryInstanceID parameter. The -PassThru parameter is deprecated, use -Select '^RecoveryInstanceID' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.UpdateEDRSFailbackReplicationConfigurationCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.EDRS.UpdateEDRSLaunchConfigurationCmdlet"> <summary> Updates a LaunchConfiguration by Source Server ID. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.UpdateEDRSLaunchConfigurationCmdlet.CopyPrivateIp"> <summary> <para> <para>Whether we should copy the Private IP of the Source Server to the Recovery Instance.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.UpdateEDRSLaunchConfigurationCmdlet.CopyTag"> <summary> <para> <para>Whether we want to copy the tags of the Source Server to the EC2 machine of the Recovery Instance.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.UpdateEDRSLaunchConfigurationCmdlet.LaunchDisposition"> <summary> <para> <para>The state of the Recovery Instance in EC2 after the recovery operation.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.UpdateEDRSLaunchConfigurationCmdlet.Name"> <summary> <para> <para>The name of the launch configuration.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.UpdateEDRSLaunchConfigurationCmdlet.Licensing_OsByol"> <summary> <para> <para>Whether to enable "Bring your own license" or not.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.UpdateEDRSLaunchConfigurationCmdlet.SourceServerID"> <summary> <para> <para>The ID of the Source Server that we want to retrieve a Launch Configuration for.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.UpdateEDRSLaunchConfigurationCmdlet.TargetInstanceTypeRightSizingMethod"> <summary> <para> <para>Whether Elastic Disaster Recovery should try to automatically choose the instance type that best matches the OS, CPU, and RAM of your Source Server.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.UpdateEDRSLaunchConfigurationCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is '*'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Drs.Model.UpdateLaunchConfigurationResponse). Specifying the name of a property of type Amazon.Drs.Model.UpdateLaunchConfigurationResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.UpdateEDRSLaunchConfigurationCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the SourceServerID parameter. The -PassThru parameter is deprecated, use -Select '^SourceServerID' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.UpdateEDRSLaunchConfigurationCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.EDRS.UpdateEDRSReplicationConfigurationCmdlet"> <summary> Allows you to update a ReplicationConfiguration by Source Server ID. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.UpdateEDRSReplicationConfigurationCmdlet.AssociateDefaultSecurityGroup"> <summary> <para> <para>Whether to associate the default Elastic Disaster Recovery Security group with the Replication Configuration.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.UpdateEDRSReplicationConfigurationCmdlet.BandwidthThrottling"> <summary> <para> <para>Configure bandwidth throttling for the outbound data transfer rate of the Source Server in Mbps.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.UpdateEDRSReplicationConfigurationCmdlet.CreatePublicIP"> <summary> <para> <para>Whether to create a Public IP for the Recovery Instance by default.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.UpdateEDRSReplicationConfigurationCmdlet.DataPlaneRouting"> <summary> <para> <para>The data plane routing mechanism that will be used for replication.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.UpdateEDRSReplicationConfigurationCmdlet.DefaultLargeStagingDiskType"> <summary> <para> <para>The Staging Disk EBS volume type to be used during replication.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.UpdateEDRSReplicationConfigurationCmdlet.EbsEncryption"> <summary> <para> <para>The type of EBS encryption to be used during replication.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.UpdateEDRSReplicationConfigurationCmdlet.EbsEncryptionKeyArn"> <summary> <para> <para>The ARN of the EBS encryption key to be used during replication.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.UpdateEDRSReplicationConfigurationCmdlet.Name"> <summary> <para> <para>The name of the Replication Configuration.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.UpdateEDRSReplicationConfigurationCmdlet.PitPolicy"> <summary> <para> <para>The Point in time (PIT) policy to manage snapshots taken during replication.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.UpdateEDRSReplicationConfigurationCmdlet.ReplicatedDisk"> <summary> <para> <para>The configuration of the disks of the Source Server to be replicated.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.UpdateEDRSReplicationConfigurationCmdlet.ReplicationServerInstanceType"> <summary> <para> <para>The instance type to be used for the replication server.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.UpdateEDRSReplicationConfigurationCmdlet.ReplicationServersSecurityGroupsIDs"> <summary> <para> <para>The security group IDs that will be used by the replication server.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.UpdateEDRSReplicationConfigurationCmdlet.SourceServerID"> <summary> <para> <para>The ID of the Source Server for this Replication Configuration.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.UpdateEDRSReplicationConfigurationCmdlet.StagingAreaSubnetId"> <summary> <para> <para>The subnet to be used by the replication staging area.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.UpdateEDRSReplicationConfigurationCmdlet.StagingAreaTag"> <summary> <para> <para>A set of tags to be associated with all resources created in the replication staging area: EC2 replication server, EBS volumes, EBS snapshots, etc.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.UpdateEDRSReplicationConfigurationCmdlet.UseDedicatedReplicationServer"> <summary> <para> <para>Whether to use a dedicated Replication Server in the replication staging area.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.UpdateEDRSReplicationConfigurationCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is '*'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Drs.Model.UpdateReplicationConfigurationResponse). Specifying the name of a property of type Amazon.Drs.Model.UpdateReplicationConfigurationResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.UpdateEDRSReplicationConfigurationCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the SourceServerID parameter. The -PassThru parameter is deprecated, use -Select '^SourceServerID' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.UpdateEDRSReplicationConfigurationCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.EDRS.UpdateEDRSReplicationConfigurationTemplateCmdlet"> <summary> Updates a ReplicationConfigurationTemplate by ID. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.UpdateEDRSReplicationConfigurationTemplateCmdlet.Arn"> <summary> <para> <para>The Replication Configuration Template ARN.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.UpdateEDRSReplicationConfigurationTemplateCmdlet.AssociateDefaultSecurityGroup"> <summary> <para> <para>Whether to associate the default Elastic Disaster Recovery Security group with the Replication Configuration Template.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.UpdateEDRSReplicationConfigurationTemplateCmdlet.BandwidthThrottling"> <summary> <para> <para>Configure bandwidth throttling for the outbound data transfer rate of the Source Server in Mbps.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.UpdateEDRSReplicationConfigurationTemplateCmdlet.CreatePublicIP"> <summary> <para> <para>Whether to create a Public IP for the Recovery Instance by default.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.UpdateEDRSReplicationConfigurationTemplateCmdlet.DataPlaneRouting"> <summary> <para> <para>The data plane routing mechanism that will be used for replication.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.UpdateEDRSReplicationConfigurationTemplateCmdlet.DefaultLargeStagingDiskType"> <summary> <para> <para>The Staging Disk EBS volume type to be used during replication.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.UpdateEDRSReplicationConfigurationTemplateCmdlet.EbsEncryption"> <summary> <para> <para>The type of EBS encryption to be used during replication.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.UpdateEDRSReplicationConfigurationTemplateCmdlet.EbsEncryptionKeyArn"> <summary> <para> <para>The ARN of the EBS encryption key to be used during replication.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.UpdateEDRSReplicationConfigurationTemplateCmdlet.PitPolicy"> <summary> <para> <para>The Point in time (PIT) policy to manage snapshots taken during replication.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.UpdateEDRSReplicationConfigurationTemplateCmdlet.ReplicationConfigurationTemplateID"> <summary> <para> <para>The Replication Configuration Template ID.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.UpdateEDRSReplicationConfigurationTemplateCmdlet.ReplicationServerInstanceType"> <summary> <para> <para>The instance type to be used for the replication server.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.UpdateEDRSReplicationConfigurationTemplateCmdlet.ReplicationServersSecurityGroupsIDs"> <summary> <para> <para>The security group IDs that will be used by the replication server.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.UpdateEDRSReplicationConfigurationTemplateCmdlet.StagingAreaSubnetId"> <summary> <para> <para>The subnet to be used by the replication staging area.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.UpdateEDRSReplicationConfigurationTemplateCmdlet.StagingAreaTag"> <summary> <para> <para>A set of tags to be associated with all resources created in the replication staging area: EC2 replication server, EBS volumes, EBS snapshots, etc.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.UpdateEDRSReplicationConfigurationTemplateCmdlet.UseDedicatedReplicationServer"> <summary> <para> <para>Whether to use a dedicated Replication Server in the replication staging area.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.UpdateEDRSReplicationConfigurationTemplateCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is '*'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Drs.Model.UpdateReplicationConfigurationTemplateResponse). Specifying the name of a property of type Amazon.Drs.Model.UpdateReplicationConfigurationTemplateResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.UpdateEDRSReplicationConfigurationTemplateCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the ReplicationConfigurationTemplateID parameter. The -PassThru parameter is deprecated, use -Select '^ReplicationConfigurationTemplateID' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.EDRS.UpdateEDRSReplicationConfigurationTemplateCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> </members> </doc> |