AWS.Tools.DirectoryService.XML

<?xml version="1.0"?>
<doc>
    <assembly>
        <name>AWS.Tools.DirectoryService</name>
    </assembly>
    <members>
        <member name="T:Amazon.PowerShell.Cmdlets.DS.AddDSIpRouteCmdlet">
            <summary>
            If the DNS server for your self-managed domain uses a publicly addressable IP address,
            you must add a CIDR address block to correctly route traffic to and from your Microsoft
            AD on Amazon Web Services. <i>AddIpRoutes</i> adds this address block. You can also
            use <i>AddIpRoutes</i> to facilitate routing traffic that uses public IP ranges from
            your Microsoft AD on Amazon Web Services to a peer VPC.
             
              
            <para>
            Before you call <i>AddIpRoutes</i>, ensure that all of the required permissions have
            been explicitly granted through a policy. For details about what permissions are required
            to run the <i>AddIpRoutes</i> operation, see <a href="http://docs.aws.amazon.com/directoryservice/latest/admin-guide/UsingWithDS_IAM_ResourcePermissions.html">Directory
            Service API Permissions: Actions, Resources, and Conditions Reference</a>.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.AddDSIpRouteCmdlet.DirectoryId">
            <summary>
            <para>
            <para>Identifier (ID) of the directory to which to add the address block.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.AddDSIpRouteCmdlet.IpRoute">
            <summary>
            <para>
            <para>IP address blocks, using CIDR format, of the traffic to route. This is often the IP
            address block of the DNS server used for your self-managed domain.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.AddDSIpRouteCmdlet.UpdateSecurityGroupForDirectoryController">
            <summary>
            <para>
            <para>If set to true, updates the inbound and outbound rules of the security group that
            has the description: "Amazon Web Services created security group for <i>directory
            ID</i> directory controllers." Following are the new rules: </para><para>Inbound:</para><ul><li><para>Type: Custom UDP Rule, Protocol: UDP, Range: 88, Source: Managed Microsoft AD VPC
            IPv4 CIDR</para></li><li><para>Type: Custom UDP Rule, Protocol: UDP, Range: 123, Source: Managed Microsoft AD VPC
            IPv4 CIDR</para></li><li><para>Type: Custom UDP Rule, Protocol: UDP, Range: 138, Source: Managed Microsoft AD VPC
            IPv4 CIDR</para></li><li><para>Type: Custom UDP Rule, Protocol: UDP, Range: 389, Source: Managed Microsoft AD VPC
            IPv4 CIDR</para></li><li><para>Type: Custom UDP Rule, Protocol: UDP, Range: 464, Source: Managed Microsoft AD VPC
            IPv4 CIDR</para></li><li><para>Type: Custom UDP Rule, Protocol: UDP, Range: 445, Source: Managed Microsoft AD VPC
            IPv4 CIDR</para></li><li><para>Type: Custom TCP Rule, Protocol: TCP, Range: 88, Source: Managed Microsoft AD VPC
            IPv4 CIDR</para></li><li><para>Type: Custom TCP Rule, Protocol: TCP, Range: 135, Source: Managed Microsoft AD VPC
            IPv4 CIDR</para></li><li><para>Type: Custom TCP Rule, Protocol: TCP, Range: 445, Source: Managed Microsoft AD VPC
            IPv4 CIDR</para></li><li><para>Type: Custom TCP Rule, Protocol: TCP, Range: 464, Source: Managed Microsoft AD VPC
            IPv4 CIDR</para></li><li><para>Type: Custom TCP Rule, Protocol: TCP, Range: 636, Source: Managed Microsoft AD VPC
            IPv4 CIDR</para></li><li><para>Type: Custom TCP Rule, Protocol: TCP, Range: 1024-65535, Source: Managed Microsoft
            AD VPC IPv4 CIDR</para></li><li><para>Type: Custom TCP Rule, Protocol: TCP, Range: 3268-33269, Source: Managed Microsoft
            AD VPC IPv4 CIDR</para></li><li><para>Type: DNS (UDP), Protocol: UDP, Range: 53, Source: Managed Microsoft AD VPC IPv4 CIDR</para></li><li><para>Type: DNS (TCP), Protocol: TCP, Range: 53, Source: Managed Microsoft AD VPC IPv4 CIDR</para></li><li><para>Type: LDAP, Protocol: TCP, Range: 389, Source: Managed Microsoft AD VPC IPv4 CIDR</para></li><li><para>Type: All ICMP, Protocol: All, Range: N/A, Source: Managed Microsoft AD VPC IPv4 CIDR</para></li></ul><para>Outbound:</para><ul><li><para>Type: All traffic, Protocol: All, Range: All, Destination: 0.0.0.0/0</para></li></ul><para>These security rules impact an internal network interface that is not exposed publicly.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.AddDSIpRouteCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DirectoryService.Model.AddIpRoutesResponse).
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.AddDSIpRouteCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the DirectoryId parameter.
            The -PassThru parameter is deprecated, use -Select '^DirectoryId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.AddDSIpRouteCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DS.AddDSRegionCmdlet">
            <summary>
            Adds two domain controllers in the specified Region for the specified directory.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.AddDSRegionCmdlet.DirectoryId">
            <summary>
            <para>
            <para>The identifier of the directory to which you want to add Region replication.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.AddDSRegionCmdlet.RegionName">
            <summary>
            <para>
            <para>The name of the Region where you want to add domain controllers for replication. For
            example, <c>us-east-1</c>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.AddDSRegionCmdlet.VPCSettings_SubnetId">
            <summary>
            <para>
            <para>The identifiers of the subnets for the directory servers. The two subnets must be
            in different Availability Zones. Directory Service creates a directory server and
            a DNS server in each of these subnets.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.AddDSRegionCmdlet.VPCSettings_VpcId">
            <summary>
            <para>
            <para>The identifier of the VPC in which to create the directory.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.AddDSRegionCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DirectoryService.Model.AddRegionResponse).
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.AddDSRegionCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the DirectoryId parameter.
            The -PassThru parameter is deprecated, use -Select '^DirectoryId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.AddDSRegionCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DS.AddDSResourceTagCmdlet">
            <summary>
            Adds or overwrites one or more tags for the specified directory. Each directory can
            have a maximum of 50 tags. Each tag consists of a key and optional value. Tag keys
            must be unique to each resource.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.AddDSResourceTagCmdlet.ResourceId">
            <summary>
            <para>
            <para>Identifier (ID) for the directory to which to add the tag.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.AddDSResourceTagCmdlet.Tag">
            <summary>
            <para>
            <para>The tags to be assigned to the directory.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.AddDSResourceTagCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DirectoryService.Model.AddTagsToResourceResponse).
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.AddDSResourceTagCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the ResourceId parameter.
            The -PassThru parameter is deprecated, use -Select '^ResourceId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.AddDSResourceTagCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DS.ApproveDSTrustCmdlet">
            <summary>
            Directory Service for Microsoft Active Directory allows you to configure and verify
            trust relationships.
             
              
            <para>
            This action verifies a trust relationship between your Managed Microsoft AD directory
            and an external domain.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.ApproveDSTrustCmdlet.TrustId">
            <summary>
            <para>
            <para>The unique Trust ID of the trust relationship to verify.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.ApproveDSTrustCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'TrustId'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DirectoryService.Model.VerifyTrustResponse).
            Specifying the name of a property of type Amazon.DirectoryService.Model.VerifyTrustResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.ApproveDSTrustCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the TrustId parameter.
            The -PassThru parameter is deprecated, use -Select '^TrustId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.ApproveDSTrustCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DS.ConfirmDSSharedDirectoryCmdlet">
            <summary>
            Accepts a directory sharing request that was sent from the directory owner account.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.ConfirmDSSharedDirectoryCmdlet.SharedDirectoryId">
            <summary>
            <para>
            <para>Identifier of the shared directory in the directory consumer account. This identifier
            is different for each directory owner account. </para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.ConfirmDSSharedDirectoryCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'SharedDirectory'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DirectoryService.Model.AcceptSharedDirectoryResponse).
            Specifying the name of a property of type Amazon.DirectoryService.Model.AcceptSharedDirectoryResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.ConfirmDSSharedDirectoryCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the SharedDirectoryId parameter.
            The -PassThru parameter is deprecated, use -Select '^SharedDirectoryId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.ConfirmDSSharedDirectoryCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DS.ConnectDSDirectoryCmdlet">
            <summary>
            Creates an AD Connector to connect to a self-managed directory.
             
              
            <para>
            Before you call <c>ConnectDirectory</c>, ensure that all of the required permissions
            have been explicitly granted through a policy. For details about what permissions
            are required to run the <c>ConnectDirectory</c> operation, see <a href="http://docs.aws.amazon.com/directoryservice/latest/admin-guide/UsingWithDS_IAM_ResourcePermissions.html">Directory
            Service API Permissions: Actions, Resources, and Conditions Reference</a>.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.ConnectDSDirectoryCmdlet.ConnectSettings_CustomerDnsIp">
            <summary>
            <para>
            <para>A list of one or more IP addresses of DNS servers or domain controllers in your self-managed
            directory.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.ConnectDSDirectoryCmdlet.ConnectSettings_CustomerUserName">
            <summary>
            <para>
            <para>The user name of an account in your self-managed directory that is used to connect
            to the directory. This account must have the following permissions:</para><ul><li><para>Read users and groups</para></li><li><para>Create computer objects</para></li><li><para>Join computers to the domain</para></li></ul>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.ConnectDSDirectoryCmdlet.Description">
            <summary>
            <para>
            <para>A description for the directory.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.ConnectDSDirectoryCmdlet.Name">
            <summary>
            <para>
            <para>The fully qualified name of your self-managed directory, such as <c>corp.example.com</c>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.ConnectDSDirectoryCmdlet.Password">
            <summary>
            <para>
            <para>The password for your self-managed user account.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.ConnectDSDirectoryCmdlet.ShortName">
            <summary>
            <para>
            <para>The NetBIOS name of your self-managed directory, such as <c>CORP</c>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.ConnectDSDirectoryCmdlet.Size">
            <summary>
            <para>
            <para>The size of the directory.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.ConnectDSDirectoryCmdlet.ConnectSettings_SubnetId">
            <summary>
            <para>
            <para>A list of subnet identifiers in the VPC in which the AD Connector is created.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.ConnectDSDirectoryCmdlet.Tag">
            <summary>
            <para>
            <para>The tags to be assigned to AD Connector.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.ConnectDSDirectoryCmdlet.ConnectSettings_VpcId">
            <summary>
            <para>
            <para>The identifier of the VPC in which the AD Connector is created.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.ConnectDSDirectoryCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'DirectoryId'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DirectoryService.Model.ConnectDirectoryResponse).
            Specifying the name of a property of type Amazon.DirectoryService.Model.ConnectDirectoryResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.ConnectDSDirectoryCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the Name parameter.
            The -PassThru parameter is deprecated, use -Select '^Name' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.ConnectDSDirectoryCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DS.DenyDSSharedDirectoryCmdlet">
            <summary>
            Rejects a directory sharing request that was sent from the directory owner account.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.DenyDSSharedDirectoryCmdlet.SharedDirectoryId">
            <summary>
            <para>
            <para>Identifier of the shared directory in the directory consumer account. This identifier
            is different for each directory owner account.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.DenyDSSharedDirectoryCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'SharedDirectoryId'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DirectoryService.Model.RejectSharedDirectoryResponse).
            Specifying the name of a property of type Amazon.DirectoryService.Model.RejectSharedDirectoryResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.DenyDSSharedDirectoryCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the SharedDirectoryId parameter.
            The -PassThru parameter is deprecated, use -Select '^SharedDirectoryId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.DenyDSSharedDirectoryCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DS.DisableDSClientAuthenticationCmdlet">
            <summary>
            Disables alternative client authentication methods for the specified directory.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.DisableDSClientAuthenticationCmdlet.DirectoryId">
            <summary>
            <para>
            <para>The identifier of the directory </para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.DisableDSClientAuthenticationCmdlet.Type">
            <summary>
            <para>
            <para>The type of client authentication to disable. Currently the only parameter <c>"SmartCard"</c>
            is supported.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.DisableDSClientAuthenticationCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DirectoryService.Model.DisableClientAuthenticationResponse).
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.DisableDSClientAuthenticationCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the DirectoryId parameter.
            The -PassThru parameter is deprecated, use -Select '^DirectoryId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.DisableDSClientAuthenticationCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DS.DisableDSDirectoryDataAccessCmdlet">
            <summary>
            Deactivates access to directory data via the Directory Service Data API for the specified
            directory.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.DisableDSDirectoryDataAccessCmdlet.DirectoryId">
            <summary>
            <para>
            <para>The directory identifier.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.DisableDSDirectoryDataAccessCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DirectoryService.Model.DisableDirectoryDataAccessResponse).
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.DisableDSDirectoryDataAccessCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the DirectoryId parameter.
            The -PassThru parameter is deprecated, use -Select '^DirectoryId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.DisableDSDirectoryDataAccessCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DS.DisableDSDirectoryShareCmdlet">
            <summary>
            Stops the directory sharing between the directory owner and consumer accounts.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.DisableDSDirectoryShareCmdlet.DirectoryId">
            <summary>
            <para>
            <para>The identifier of the Managed Microsoft AD directory that you want to stop sharing.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.DisableDSDirectoryShareCmdlet.UnshareTarget_Id">
            <summary>
            <para>
            <para>Identifier of the directory consumer account.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.DisableDSDirectoryShareCmdlet.UnshareTarget_Type">
            <summary>
            <para>
            <para>Type of identifier to be used in the <i>Id</i> field.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.DisableDSDirectoryShareCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'SharedDirectoryId'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DirectoryService.Model.UnshareDirectoryResponse).
            Specifying the name of a property of type Amazon.DirectoryService.Model.UnshareDirectoryResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.DisableDSDirectoryShareCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the DirectoryId parameter.
            The -PassThru parameter is deprecated, use -Select '^DirectoryId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.DisableDSDirectoryShareCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DS.DisableDSLDAPSCmdlet">
            <summary>
            Deactivates LDAP secure calls for the specified directory.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.DisableDSLDAPSCmdlet.DirectoryId">
            <summary>
            <para>
            <para>The identifier of the directory.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.DisableDSLDAPSCmdlet.Type">
            <summary>
            <para>
            <para>The type of LDAP security to enable. Currently only the value <c>Client</c> is supported.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.DisableDSLDAPSCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DirectoryService.Model.DisableLDAPSResponse).
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.DisableDSLDAPSCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the DirectoryId parameter.
            The -PassThru parameter is deprecated, use -Select '^DirectoryId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.DisableDSLDAPSCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DS.DisableDSRadiusCmdlet">
            <summary>
            Disables multi-factor authentication (MFA) with the Remote Authentication Dial In
            User Service (RADIUS) server for an AD Connector or Microsoft AD directory.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.DisableDSRadiusCmdlet.DirectoryId">
            <summary>
            <para>
            <para>The identifier of the directory for which to disable MFA.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.DisableDSRadiusCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DirectoryService.Model.DisableRadiusResponse).
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.DisableDSRadiusCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the DirectoryId parameter.
            The -PassThru parameter is deprecated, use -Select '^DirectoryId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.DisableDSRadiusCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DS.DisableDSSsoCmdlet">
            <summary>
            Disables single-sign on for a directory.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.DisableDSSsoCmdlet.DirectoryId">
            <summary>
            <para>
            <para>The identifier of the directory for which to disable single-sign on.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.DisableDSSsoCmdlet.Password">
            <summary>
            <para>
            <para>The password of an alternate account to use to disable single-sign on. This is only
            used for AD Connector directories. For more information, see the <i>UserName</i> parameter.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.DisableDSSsoCmdlet.UserName">
            <summary>
            <para>
            <para>The username of an alternate account to use to disable single-sign on. This is only
            used for AD Connector directories. This account must have privileges to remove a service
            principal name.</para><para>If the AD Connector service account does not have privileges to remove a service principal
            name, you can specify an alternate account with the <i>UserName</i> and <i>Password</i>
            parameters. These credentials are only used to disable single sign-on and are not
            stored by the service. The AD Connector service account is not changed.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.DisableDSSsoCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DirectoryService.Model.DisableSsoResponse).
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.DisableDSSsoCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the DirectoryId parameter.
            The -PassThru parameter is deprecated, use -Select '^DirectoryId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.DisableDSSsoCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DS.EnableDSClientAuthenticationCmdlet">
            <summary>
            Enables alternative client authentication methods for the specified directory.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.EnableDSClientAuthenticationCmdlet.DirectoryId">
            <summary>
            <para>
            <para>The identifier of the specified directory. </para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.EnableDSClientAuthenticationCmdlet.Type">
            <summary>
            <para>
            <para>The type of client authentication to enable. Currently only the value <c>SmartCard</c>
            is supported. Smart card authentication in AD Connector requires that you enable Kerberos
            Constrained Delegation for the Service User to the LDAP service in your self-managed
            AD. </para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.EnableDSClientAuthenticationCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DirectoryService.Model.EnableClientAuthenticationResponse).
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.EnableDSClientAuthenticationCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the DirectoryId parameter.
            The -PassThru parameter is deprecated, use -Select '^DirectoryId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.EnableDSClientAuthenticationCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DS.EnableDSDirectoryDataAccessCmdlet">
            <summary>
            Enables access to directory data via the Directory Service Data API for the specified
            directory.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.EnableDSDirectoryDataAccessCmdlet.DirectoryId">
            <summary>
            <para>
            <para>The directory identifier.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.EnableDSDirectoryDataAccessCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DirectoryService.Model.EnableDirectoryDataAccessResponse).
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.EnableDSDirectoryDataAccessCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the DirectoryId parameter.
            The -PassThru parameter is deprecated, use -Select '^DirectoryId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.EnableDSDirectoryDataAccessCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DS.EnableDSDirectoryShareCmdlet">
            <summary>
            Shares a specified directory (<c>DirectoryId</c>) in your Amazon Web Services account
            (directory owner) with another Amazon Web Services account (directory consumer). With
            this operation you can use your directory from any Amazon Web Services account and
            from any Amazon VPC within an Amazon Web Services Region.
             
              
            <para>
            When you share your Managed Microsoft AD directory, Directory Service creates a shared
            directory in the directory consumer account. This shared directory contains the metadata
            to provide access to the directory within the directory owner account. The shared
            directory is visible in all VPCs in the directory consumer account.
            </para><para>
            The <c>ShareMethod</c> parameter determines whether the specified directory can be
            shared between Amazon Web Services accounts inside the same Amazon Web Services organization
            (<c>ORGANIZATIONS</c>). It also determines whether you can share the directory with
            any other Amazon Web Services account either inside or outside of the organization
            (<c>HANDSHAKE</c>).
            </para><para>
            The <c>ShareNotes</c> parameter is only used when <c>HANDSHAKE</c> is called, which
            sends a directory sharing request to the directory consumer.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.EnableDSDirectoryShareCmdlet.DirectoryId">
            <summary>
            <para>
            <para>Identifier of the Managed Microsoft AD directory that you want to share with other
            Amazon Web Services accounts.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.EnableDSDirectoryShareCmdlet.ShareTarget_Id">
            <summary>
            <para>
            <para>Identifier of the directory consumer account.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.EnableDSDirectoryShareCmdlet.ShareMethod">
            <summary>
            <para>
            <para>The method used when sharing a directory to determine whether the directory should
            be shared within your Amazon Web Services organization (<c>ORGANIZATIONS</c>) or with
            any Amazon Web Services account by sending a directory sharing request (<c>HANDSHAKE</c>).</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.EnableDSDirectoryShareCmdlet.ShareNote">
            <summary>
            <para>
            <para>A directory share request that is sent by the directory owner to the directory consumer.
            The request includes a typed message to help the directory consumer administrator
            determine whether to approve or reject the share invitation.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.EnableDSDirectoryShareCmdlet.ShareTarget_Type">
            <summary>
            <para>
            <para>Type of identifier to be used in the <c>Id</c> field.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.EnableDSDirectoryShareCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'SharedDirectoryId'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DirectoryService.Model.ShareDirectoryResponse).
            Specifying the name of a property of type Amazon.DirectoryService.Model.ShareDirectoryResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.EnableDSDirectoryShareCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the DirectoryId parameter.
            The -PassThru parameter is deprecated, use -Select '^DirectoryId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.EnableDSDirectoryShareCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DS.EnableDSLDAPSCmdlet">
            <summary>
            Activates the switch for the specific directory to always use LDAP secure calls.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.EnableDSLDAPSCmdlet.DirectoryId">
            <summary>
            <para>
            <para>The identifier of the directory.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.EnableDSLDAPSCmdlet.Type">
            <summary>
            <para>
            <para>The type of LDAP security to enable. Currently only the value <c>Client</c> is supported.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.EnableDSLDAPSCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DirectoryService.Model.EnableLDAPSResponse).
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.EnableDSLDAPSCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the DirectoryId parameter.
            The -PassThru parameter is deprecated, use -Select '^DirectoryId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.EnableDSLDAPSCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DS.EnableDSRadiusCmdlet">
            <summary>
            Enables multi-factor authentication (MFA) with the Remote Authentication Dial In User
            Service (RADIUS) server for an AD Connector or Microsoft AD directory.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.EnableDSRadiusCmdlet.RadiusSettings_AuthenticationProtocol">
            <summary>
            <para>
            <para>The protocol specified for your RADIUS endpoints.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.EnableDSRadiusCmdlet.DirectoryId">
            <summary>
            <para>
            <para>The identifier of the directory for which to enable MFA.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.EnableDSRadiusCmdlet.RadiusSettings_DisplayLabel">
            <summary>
            <para>
            <para>Not currently used.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.EnableDSRadiusCmdlet.RadiusSettings_RadiusPort">
            <summary>
            <para>
            <para>The port that your RADIUS server is using for communications. Your self-managed network
            must allow inbound traffic over this port from the Directory Service servers.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.EnableDSRadiusCmdlet.RadiusSettings_RadiusRetry">
            <summary>
            <para>
            <para>The maximum number of times that communication with the RADIUS server is retried after
            the initial attempt.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.EnableDSRadiusCmdlet.RadiusSettings_RadiusServer">
            <summary>
            <para>
            <para>An array of strings that contains the fully qualified domain name (FQDN) or IP addresses
            of the RADIUS server endpoints, or the FQDN or IP addresses of your RADIUS server
            load balancer.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.EnableDSRadiusCmdlet.RadiusSettings_RadiusTimeout">
            <summary>
            <para>
            <para>The amount of time, in seconds, to wait for the RADIUS server to respond.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.EnableDSRadiusCmdlet.RadiusSettings_SharedSecret">
            <summary>
            <para>
            <para>Required for enabling RADIUS on the directory.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.EnableDSRadiusCmdlet.RadiusSettings_UseSameUsername">
            <summary>
            <para>
            <para>Not currently used.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.EnableDSRadiusCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DirectoryService.Model.EnableRadiusResponse).
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.EnableDSRadiusCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the DirectoryId parameter.
            The -PassThru parameter is deprecated, use -Select '^DirectoryId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.EnableDSRadiusCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DS.EnableDSSsoCmdlet">
            <summary>
            Enables single sign-on for a directory. Single sign-on allows users in your directory
            to access certain Amazon Web Services services from a computer joined to the directory
            without having to enter their credentials separately.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.EnableDSSsoCmdlet.DirectoryId">
            <summary>
            <para>
            <para>The identifier of the directory for which to enable single-sign on.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.EnableDSSsoCmdlet.Password">
            <summary>
            <para>
            <para>The password of an alternate account to use to enable single-sign on. This is only
            used for AD Connector directories. For more information, see the <i>UserName</i> parameter.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.EnableDSSsoCmdlet.UserName">
            <summary>
            <para>
            <para>The username of an alternate account to use to enable single-sign on. This is only
            used for AD Connector directories. This account must have privileges to add a service
            principal name.</para><para>If the AD Connector service account does not have privileges to add a service principal
            name, you can specify an alternate account with the <i>UserName</i> and <i>Password</i>
            parameters. These credentials are only used to enable single sign-on and are not stored
            by the service. The AD Connector service account is not changed.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.EnableDSSsoCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DirectoryService.Model.EnableSsoResponse).
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.EnableDSSsoCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the DirectoryId parameter.
            The -PassThru parameter is deprecated, use -Select '^DirectoryId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.EnableDSSsoCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DS.GetDSCertificateCmdlet">
            <summary>
            Displays information about the certificate registered for secure LDAP or client certificate
            authentication.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.GetDSCertificateCmdlet.CertificateId">
            <summary>
            <para>
            <para>The identifier of the certificate.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.GetDSCertificateCmdlet.DirectoryId">
            <summary>
            <para>
            <para>The identifier of the directory.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.GetDSCertificateCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Certificate'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DirectoryService.Model.DescribeCertificateResponse).
            Specifying the name of a property of type Amazon.DirectoryService.Model.DescribeCertificateResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.GetDSCertificateCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the CertificateId parameter.
            The -PassThru parameter is deprecated, use -Select '^CertificateId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DS.GetDSCertificateListCmdlet">
            <summary>
            For the specified directory, lists all the certificates registered for a secure LDAP
            or client certificate authentication.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.GetDSCertificateListCmdlet.DirectoryId">
            <summary>
            <para>
            <para>The identifier of the directory.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.GetDSCertificateListCmdlet.Limit">
            <summary>
            <para>
            <para>The number of items that should show up on one page</para>
            </para>
            <para>
            <br/><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet.
            <br/>In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call.
            <br/>Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.GetDSCertificateListCmdlet.NextToken">
            <summary>
            <para>
            <para>A token for requesting another page of certificates if the <c>NextToken</c> response
            element indicates that more certificates are available. Use the value of the returned
            <c>NextToken</c> element in your request until the token comes back as <c>null</c>.
            Pass <c>null</c> if this is the first call.</para>
            </para>
            <para>
            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.
            <br/>'NextToken' is only returned by the cmdlet when '-Select *' is specified. In order to manually control output pagination, set '-NextToken' to null for the first call then set the 'NextToken' using the same property output from the previous call for subsequent calls.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.GetDSCertificateListCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'CertificatesInfo'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DirectoryService.Model.ListCertificatesResponse).
            Specifying the name of a property of type Amazon.DirectoryService.Model.ListCertificatesResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.GetDSCertificateListCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the DirectoryId parameter.
            The -PassThru parameter is deprecated, use -Select '^DirectoryId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.GetDSCertificateListCmdlet.NoAutoIteration">
            <summary>
            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple
            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken
            as the start point.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DS.GetDSClientAuthenticationSettingCmdlet">
            <summary>
            Retrieves information about the type of client authentication for the specified directory,
            if the type is specified. If no type is specified, information about all client authentication
            types that are supported for the specified directory is retrieved. Currently, only
            <c>SmartCard</c> is supported.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.GetDSClientAuthenticationSettingCmdlet.DirectoryId">
            <summary>
            <para>
            <para>The identifier of the directory for which to retrieve information.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.GetDSClientAuthenticationSettingCmdlet.Type">
            <summary>
            <para>
            <para>The type of client authentication for which to retrieve information. If no type is
            specified, a list of all client authentication types that are supported for the specified
            directory is retrieved.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.GetDSClientAuthenticationSettingCmdlet.Limit">
            <summary>
            <para>
            <para>The maximum number of items to return. If this value is zero, the maximum number of
            items is specified by the limitations of the operation. </para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.GetDSClientAuthenticationSettingCmdlet.NextToken">
            <summary>
            <para>
            <para>The <i>DescribeClientAuthenticationSettingsResult.NextToken</i> value from a previous
            call to <a>DescribeClientAuthenticationSettings</a>. Pass null if this is the first
            call.</para>
            </para>
            <para>
            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.
            <br/>'NextToken' is only returned by the cmdlet when '-Select *' is specified. In order to manually control output pagination, set '-NextToken' to null for the first call then set the 'NextToken' using the same property output from the previous call for subsequent calls.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.GetDSClientAuthenticationSettingCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'ClientAuthenticationSettingsInfo'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DirectoryService.Model.DescribeClientAuthenticationSettingsResponse).
            Specifying the name of a property of type Amazon.DirectoryService.Model.DescribeClientAuthenticationSettingsResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.GetDSClientAuthenticationSettingCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the DirectoryId parameter.
            The -PassThru parameter is deprecated, use -Select '^DirectoryId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.GetDSClientAuthenticationSettingCmdlet.NoAutoIteration">
            <summary>
            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple
            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken
            as the start point.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DS.GetDSConditionalForwarderCmdlet">
            <summary>
            Obtains information about the conditional forwarders for this account.
             
              
            <para>
            If no input parameters are provided for RemoteDomainNames, this request describes
            all conditional forwarders for the specified directory ID.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.GetDSConditionalForwarderCmdlet.DirectoryId">
            <summary>
            <para>
            <para>The directory ID for which to get the list of associated conditional forwarders.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.GetDSConditionalForwarderCmdlet.RemoteDomainName">
            <summary>
            <para>
            <para>The fully qualified domain names (FQDN) of the remote domains for which to get the
            list of associated conditional forwarders. If this member is null, all conditional
            forwarders are returned.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.GetDSConditionalForwarderCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'ConditionalForwarders'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DirectoryService.Model.DescribeConditionalForwardersResponse).
            Specifying the name of a property of type Amazon.DirectoryService.Model.DescribeConditionalForwardersResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.GetDSConditionalForwarderCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the DirectoryId parameter.
            The -PassThru parameter is deprecated, use -Select '^DirectoryId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DS.GetDSDirectoryCmdlet">
            <summary>
            Obtains information about the directories that belong to this account.
             
              
            <para>
            You can retrieve information about specific directories by passing the directory identifiers
            in the <c>DirectoryIds</c> parameter. Otherwise, all directories that belong to the
            current account are returned.
            </para><para>
            This operation supports pagination with the use of the <c>NextToken</c> request and
            response parameters. If more results are available, the <c>DescribeDirectoriesResult.NextToken</c>
            member contains a token that you pass in the next call to <a>DescribeDirectories</a>
            to retrieve the next set of items.
            </para><para>
            You can also specify a maximum number of return results with the <c>Limit</c> parameter.
            </para><br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.GetDSDirectoryCmdlet.DirectoryId">
            <summary>
            <para>
            <para>A list of identifiers of the directories for which to obtain the information. If this
            member is null, all directories that belong to the current account are returned.</para><para>An empty list results in an <c>InvalidParameterException</c> being thrown.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.GetDSDirectoryCmdlet.Limit">
            <summary>
            <para>
            <para>The maximum number of items to return. If this value is zero, the maximum number of
            items is specified by the limitations of the operation.</para>
            </para>
            <para>
            <br/><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet.
            <br/>In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call.
            <br/>Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.GetDSDirectoryCmdlet.NextToken">
            <summary>
            <para>
            <para>The <c>DescribeDirectoriesResult.NextToken</c> value from a previous call to <a>DescribeDirectories</a>.
            Pass null if this is the first call.</para>
            </para>
            <para>
            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.
            <br/>'NextToken' is only returned by the cmdlet when '-Select *' is specified. In order to manually control output pagination, set '-NextToken' to null for the first call then set the 'NextToken' using the same property output from the previous call for subsequent calls.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.GetDSDirectoryCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'DirectoryDescriptions'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DirectoryService.Model.DescribeDirectoriesResponse).
            Specifying the name of a property of type Amazon.DirectoryService.Model.DescribeDirectoriesResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.GetDSDirectoryCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the DirectoryId parameter.
            The -PassThru parameter is deprecated, use -Select '^DirectoryId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.GetDSDirectoryCmdlet.NoAutoIteration">
            <summary>
            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple
            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken
            as the start point.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DS.GetDSDirectoryDataAccessCmdlet">
            <summary>
            Obtains status of directory data access enablement through the Directory Service Data
            API for the specified directory.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.GetDSDirectoryDataAccessCmdlet.DirectoryId">
            <summary>
            <para>
            <para>The directory identifier.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.GetDSDirectoryDataAccessCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'DataAccessStatus'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DirectoryService.Model.DescribeDirectoryDataAccessResponse).
            Specifying the name of a property of type Amazon.DirectoryService.Model.DescribeDirectoryDataAccessResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.GetDSDirectoryDataAccessCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the DirectoryId parameter.
            The -PassThru parameter is deprecated, use -Select '^DirectoryId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DS.GetDSDirectoryLimitCmdlet">
            <summary>
            Obtains directory limit information for the current Region.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.GetDSDirectoryLimitCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'DirectoryLimits'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DirectoryService.Model.GetDirectoryLimitsResponse).
            Specifying the name of a property of type Amazon.DirectoryService.Model.GetDirectoryLimitsResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DS.GetDSDomainControllerListCmdlet">
            <summary>
            Provides information about any domain controllers in your directory.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.GetDSDomainControllerListCmdlet.DirectoryId">
            <summary>
            <para>
            <para>Identifier of the directory for which to retrieve the domain controller information.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.GetDSDomainControllerListCmdlet.DomainControllerId">
            <summary>
            <para>
            <para>A list of identifiers for the domain controllers whose information will be provided.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.GetDSDomainControllerListCmdlet.Limit">
            <summary>
            <para>
            <para>The maximum number of items to return.</para>
            </para>
            <para>
            <br/><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet.
            <br/>In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call.
            <br/>Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.GetDSDomainControllerListCmdlet.NextToken">
            <summary>
            <para>
            <para>The <i>DescribeDomainControllers.NextToken</i> value from a previous call to <a>DescribeDomainControllers</a>.
            Pass null if this is the first call. </para>
            </para>
            <para>
            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.
            <br/>'NextToken' is only returned by the cmdlet when '-Select *' is specified. In order to manually control output pagination, set '-NextToken' to null for the first call then set the 'NextToken' using the same property output from the previous call for subsequent calls.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.GetDSDomainControllerListCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'DomainControllers'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DirectoryService.Model.DescribeDomainControllersResponse).
            Specifying the name of a property of type Amazon.DirectoryService.Model.DescribeDomainControllersResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.GetDSDomainControllerListCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the DirectoryId parameter.
            The -PassThru parameter is deprecated, use -Select '^DirectoryId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.GetDSDomainControllerListCmdlet.NoAutoIteration">
            <summary>
            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple
            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken
            as the start point.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DS.GetDSEventTopicCmdlet">
            <summary>
            Obtains information about which Amazon SNS topics receive status messages from the
            specified directory.
             
              
            <para>
            If no input parameters are provided, such as DirectoryId or TopicName, this request
            describes all of the associations in the account.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.GetDSEventTopicCmdlet.DirectoryId">
            <summary>
            <para>
            <para>The Directory ID for which to get the list of associated Amazon SNS topics. If this
            member is null, associations for all Directory IDs are returned.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.GetDSEventTopicCmdlet.TopicName">
            <summary>
            <para>
            <para>A list of Amazon SNS topic names for which to obtain the information. If this member
            is null, all associations for the specified Directory ID are returned.</para><para>An empty list results in an <c>InvalidParameterException</c> being thrown.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.GetDSEventTopicCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'EventTopics'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DirectoryService.Model.DescribeEventTopicsResponse).
            Specifying the name of a property of type Amazon.DirectoryService.Model.DescribeEventTopicsResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.GetDSEventTopicCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the TopicName parameter.
            The -PassThru parameter is deprecated, use -Select '^TopicName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DS.GetDSIpRouteListCmdlet">
            <summary>
            Lists the address blocks that you have added to a directory.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.GetDSIpRouteListCmdlet.DirectoryId">
            <summary>
            <para>
            <para>Identifier (ID) of the directory for which you want to retrieve the IP addresses.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.GetDSIpRouteListCmdlet.Limit">
            <summary>
            <para>
            <para>Maximum number of items to return. If this value is zero, the maximum number of items
            is specified by the limitations of the operation.</para>
            </para>
            <para>
            <br/><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet.
            <br/>In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call.
            <br/>Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.GetDSIpRouteListCmdlet.NextToken">
            <summary>
            <para>
            <para>The <i>ListIpRoutes.NextToken</i> value from a previous call to <a>ListIpRoutes</a>.
            Pass null if this is the first call.</para>
            </para>
            <para>
            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.
            <br/>'NextToken' is only returned by the cmdlet when '-Select *' is specified. In order to manually control output pagination, set '-NextToken' to null for the first call then set the 'NextToken' using the same property output from the previous call for subsequent calls.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.GetDSIpRouteListCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'IpRoutesInfo'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DirectoryService.Model.ListIpRoutesResponse).
            Specifying the name of a property of type Amazon.DirectoryService.Model.ListIpRoutesResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.GetDSIpRouteListCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the DirectoryId parameter.
            The -PassThru parameter is deprecated, use -Select '^DirectoryId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.GetDSIpRouteListCmdlet.NoAutoIteration">
            <summary>
            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple
            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken
            as the start point.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DS.GetDSLDAPSSettingCmdlet">
            <summary>
            Describes the status of LDAP security for the specified directory.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.GetDSLDAPSSettingCmdlet.DirectoryId">
            <summary>
            <para>
            <para>The identifier of the directory.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.GetDSLDAPSSettingCmdlet.Type">
            <summary>
            <para>
            <para>The type of LDAP security to enable. Currently only the value <c>Client</c> is supported.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.GetDSLDAPSSettingCmdlet.Limit">
            <summary>
            <para>
            <para>Specifies the number of items that should be displayed on one page.</para>
            </para>
            <para>
            <br/><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet.
            <br/>In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call.
            <br/>Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.GetDSLDAPSSettingCmdlet.NextToken">
            <summary>
            <para>
            <para>The type of next token used for pagination.</para>
            </para>
            <para>
            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.
            <br/>'NextToken' is only returned by the cmdlet when '-Select *' is specified. In order to manually control output pagination, set '-NextToken' to null for the first call then set the 'NextToken' using the same property output from the previous call for subsequent calls.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.GetDSLDAPSSettingCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'LDAPSSettingsInfo'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DirectoryService.Model.DescribeLDAPSSettingsResponse).
            Specifying the name of a property of type Amazon.DirectoryService.Model.DescribeLDAPSSettingsResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.GetDSLDAPSSettingCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the DirectoryId parameter.
            The -PassThru parameter is deprecated, use -Select '^DirectoryId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.GetDSLDAPSSettingCmdlet.NoAutoIteration">
            <summary>
            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple
            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken
            as the start point.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DS.GetDSLogSubscriptionListCmdlet">
            <summary>
            Lists the active log subscriptions for the Amazon Web Services account.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.GetDSLogSubscriptionListCmdlet.DirectoryId">
            <summary>
            <para>
            <para>If a <i>DirectoryID</i> is provided, lists only the log subscription associated with
            that directory. If no <i>DirectoryId</i> is provided, lists all log subscriptions
            associated with your Amazon Web Services account. If there are no log subscriptions
            for the Amazon Web Services account or the directory, an empty list will be returned.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.GetDSLogSubscriptionListCmdlet.Limit">
            <summary>
            <para>
            <para>The maximum number of items returned.</para>
            </para>
            <para>
            <br/><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet.
            <br/>In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call.
            <br/>Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.GetDSLogSubscriptionListCmdlet.NextToken">
            <summary>
            <para>
            <para>The token for the next set of items to return.</para>
            </para>
            <para>
            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.
            <br/>'NextToken' is only returned by the cmdlet when '-Select *' is specified. In order to manually control output pagination, set '-NextToken' to null for the first call then set the 'NextToken' using the same property output from the previous call for subsequent calls.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.GetDSLogSubscriptionListCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'LogSubscriptions'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DirectoryService.Model.ListLogSubscriptionsResponse).
            Specifying the name of a property of type Amazon.DirectoryService.Model.ListLogSubscriptionsResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.GetDSLogSubscriptionListCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the DirectoryId parameter.
            The -PassThru parameter is deprecated, use -Select '^DirectoryId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.GetDSLogSubscriptionListCmdlet.NoAutoIteration">
            <summary>
            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple
            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken
            as the start point.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DS.GetDSRegionCmdlet">
            <summary>
            Provides information about the Regions that are configured for multi-Region replication.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.GetDSRegionCmdlet.DirectoryId">
            <summary>
            <para>
            <para>The identifier of the directory.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.GetDSRegionCmdlet.RegionName">
            <summary>
            <para>
            <para>The name of the Region. For example, <c>us-east-1</c>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.GetDSRegionCmdlet.NextToken">
            <summary>
            <para>
            <para>The <c>DescribeRegionsResult.NextToken</c> value from a previous call to <a>DescribeRegions</a>.
            Pass null if this is the first call.</para>
            </para>
            <para>
            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.
            <br/>'NextToken' is only returned by the cmdlet when '-Select *' is specified. In order to manually control output pagination, set '-NextToken' to null for the first call then set the 'NextToken' using the same property output from the previous call for subsequent calls.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.GetDSRegionCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'RegionsDescription'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DirectoryService.Model.DescribeRegionsResponse).
            Specifying the name of a property of type Amazon.DirectoryService.Model.DescribeRegionsResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.GetDSRegionCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the DirectoryId parameter.
            The -PassThru parameter is deprecated, use -Select '^DirectoryId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.GetDSRegionCmdlet.NoAutoIteration">
            <summary>
            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple
            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken
            as the start point.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DS.GetDSResourceTagCmdlet">
            <summary>
            Lists all tags on a directory.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.GetDSResourceTagCmdlet.ResourceId">
            <summary>
            <para>
            <para>Identifier (ID) of the directory for which you want to retrieve tags.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.GetDSResourceTagCmdlet.Limit">
            <summary>
            <para>
            <para>Reserved for future use.</para>
            </para>
            <para>
            <br/><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet.
            <br/>In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call.
            <br/>Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.GetDSResourceTagCmdlet.NextToken">
            <summary>
            <para>
            <para>Reserved for future use.</para>
            </para>
            <para>
            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.
            <br/>'NextToken' is only returned by the cmdlet when '-Select *' is specified. In order to manually control output pagination, set '-NextToken' to null for the first call then set the 'NextToken' using the same property output from the previous call for subsequent calls.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.GetDSResourceTagCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Tags'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DirectoryService.Model.ListTagsForResourceResponse).
            Specifying the name of a property of type Amazon.DirectoryService.Model.ListTagsForResourceResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.GetDSResourceTagCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the ResourceId parameter.
            The -PassThru parameter is deprecated, use -Select '^ResourceId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.GetDSResourceTagCmdlet.NoAutoIteration">
            <summary>
            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple
            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken
            as the start point.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DS.GetDSSchemaExtensionCmdlet">
            <summary>
            Lists all schema extensions applied to a Microsoft AD Directory.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.GetDSSchemaExtensionCmdlet.DirectoryId">
            <summary>
            <para>
            <para>The identifier of the directory from which to retrieve the schema extension information.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.GetDSSchemaExtensionCmdlet.Limit">
            <summary>
            <para>
            <para>The maximum number of items to return.</para>
            </para>
            <para>
            <br/><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet.
            <br/>In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call.
            <br/>Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.GetDSSchemaExtensionCmdlet.NextToken">
            <summary>
            <para>
            <para>The <c>ListSchemaExtensions.NextToken</c> value from a previous call to <c>ListSchemaExtensions</c>.
            Pass null if this is the first call.</para>
            </para>
            <para>
            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.
            <br/>'NextToken' is only returned by the cmdlet when '-Select *' is specified. In order to manually control output pagination, set '-NextToken' to null for the first call then set the 'NextToken' using the same property output from the previous call for subsequent calls.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.GetDSSchemaExtensionCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'SchemaExtensionsInfo'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DirectoryService.Model.ListSchemaExtensionsResponse).
            Specifying the name of a property of type Amazon.DirectoryService.Model.ListSchemaExtensionsResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.GetDSSchemaExtensionCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the DirectoryId parameter.
            The -PassThru parameter is deprecated, use -Select '^DirectoryId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.GetDSSchemaExtensionCmdlet.NoAutoIteration">
            <summary>
            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple
            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken
            as the start point.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DS.GetDSSettingCmdlet">
            <summary>
            Retrieves information about the configurable settings for the specified directory.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.GetDSSettingCmdlet.DirectoryId">
            <summary>
            <para>
            <para>The identifier of the directory for which to retrieve information.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.GetDSSettingCmdlet.Status">
            <summary>
            <para>
            <para>The status of the directory settings for which to retrieve information.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.GetDSSettingCmdlet.NextToken">
            <summary>
            <para>
            <para>The <c>DescribeSettingsResult.NextToken</c> value from a previous call to <a>DescribeSettings</a>.
            Pass null if this is the first call.</para>
            </para>
            <para>
            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.
            <br/>'NextToken' is only returned by the cmdlet when '-Select *' is specified. In order to manually control output pagination, set '-NextToken' to null for the first call then set the 'NextToken' using the same property output from the previous call for subsequent calls.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.GetDSSettingCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is '*'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DirectoryService.Model.DescribeSettingsResponse).
            Specifying the name of a property of type Amazon.DirectoryService.Model.DescribeSettingsResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.GetDSSettingCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the DirectoryId parameter.
            The -PassThru parameter is deprecated, use -Select '^DirectoryId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.GetDSSettingCmdlet.NoAutoIteration">
            <summary>
            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple
            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken
            as the start point.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DS.GetDSSharedDirectoryCmdlet">
            <summary>
            Returns the shared directories in your account.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.GetDSSharedDirectoryCmdlet.OwnerDirectoryId">
            <summary>
            <para>
            <para>Returns the identifier of the directory in the directory owner account. </para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.GetDSSharedDirectoryCmdlet.SharedDirectoryId">
            <summary>
            <para>
            <para>A list of identifiers of all shared directories in your account. </para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.GetDSSharedDirectoryCmdlet.Limit">
            <summary>
            <para>
            <para>The number of shared directories to return in the response object.</para>
            </para>
            <para>
            <br/><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet.
            <br/>In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call.
            <br/>Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.GetDSSharedDirectoryCmdlet.NextToken">
            <summary>
            <para>
            <para>The <c>DescribeSharedDirectoriesResult.NextToken</c> value from a previous call to
            <a>DescribeSharedDirectories</a>. Pass null if this is the first call. </para>
            </para>
            <para>
            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.
            <br/>'NextToken' is only returned by the cmdlet when '-Select *' is specified. In order to manually control output pagination, set '-NextToken' to null for the first call then set the 'NextToken' using the same property output from the previous call for subsequent calls.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.GetDSSharedDirectoryCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'SharedDirectories'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DirectoryService.Model.DescribeSharedDirectoriesResponse).
            Specifying the name of a property of type Amazon.DirectoryService.Model.DescribeSharedDirectoriesResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.GetDSSharedDirectoryCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the OwnerDirectoryId parameter.
            The -PassThru parameter is deprecated, use -Select '^OwnerDirectoryId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.GetDSSharedDirectoryCmdlet.NoAutoIteration">
            <summary>
            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple
            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken
            as the start point.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DS.GetDSSnapshotCmdlet">
            <summary>
            Obtains information about the directory snapshots that belong to this account.
             
              
            <para>
            This operation supports pagination with the use of the <i>NextToken</i> request and
            response parameters. If more results are available, the <i>DescribeSnapshots.NextToken</i>
            member contains a token that you pass in the next call to <a>DescribeSnapshots</a>
            to retrieve the next set of items.
            </para><para>
            You can also specify a maximum number of return results with the <i>Limit</i> parameter.
            </para><br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.GetDSSnapshotCmdlet.DirectoryId">
            <summary>
            <para>
            <para>The identifier of the directory for which to retrieve snapshot information.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.GetDSSnapshotCmdlet.SnapshotId">
            <summary>
            <para>
            <para>A list of identifiers of the snapshots to obtain the information for. If this member
            is null or empty, all snapshots are returned using the <i>Limit</i> and <i>NextToken</i>
            members.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.GetDSSnapshotCmdlet.Limit">
            <summary>
            <para>
            <para>The maximum number of objects to return.</para>
            </para>
            <para>
            <br/><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet.
            <br/>In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call.
            <br/>Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.GetDSSnapshotCmdlet.NextToken">
            <summary>
            <para>
            <para>The <i>DescribeSnapshotsResult.NextToken</i> value from a previous call to <a>DescribeSnapshots</a>.
            Pass null if this is the first call.</para>
            </para>
            <para>
            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.
            <br/>'NextToken' is only returned by the cmdlet when '-Select *' is specified. In order to manually control output pagination, set '-NextToken' to null for the first call then set the 'NextToken' using the same property output from the previous call for subsequent calls.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.GetDSSnapshotCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Snapshots'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DirectoryService.Model.DescribeSnapshotsResponse).
            Specifying the name of a property of type Amazon.DirectoryService.Model.DescribeSnapshotsResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.GetDSSnapshotCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the DirectoryId parameter.
            The -PassThru parameter is deprecated, use -Select '^DirectoryId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.GetDSSnapshotCmdlet.NoAutoIteration">
            <summary>
            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple
            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken
            as the start point.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DS.GetDSSnapshotLimitCmdlet">
            <summary>
            Obtains the manual snapshot limits for a directory.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.GetDSSnapshotLimitCmdlet.DirectoryId">
            <summary>
            <para>
            <para>Contains the identifier of the directory to obtain the limits for.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.GetDSSnapshotLimitCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'SnapshotLimits'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DirectoryService.Model.GetSnapshotLimitsResponse).
            Specifying the name of a property of type Amazon.DirectoryService.Model.GetSnapshotLimitsResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.GetDSSnapshotLimitCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the DirectoryId parameter.
            The -PassThru parameter is deprecated, use -Select '^DirectoryId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DS.GetDSTrustCmdlet">
            <summary>
            Obtains information about the trust relationships for this account.
             
              
            <para>
            If no input parameters are provided, such as DirectoryId or TrustIds, this request
            describes all the trust relationships belonging to the account.
            </para><br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.GetDSTrustCmdlet.DirectoryId">
            <summary>
            <para>
            <para>The Directory ID of the Amazon Web Services directory that is a part of the requested
            trust relationship.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.GetDSTrustCmdlet.TrustId">
            <summary>
            <para>
            <para>A list of identifiers of the trust relationships for which to obtain the information.
            If this member is null, all trust relationships that belong to the current account
            are returned.</para><para>An empty list results in an <c>InvalidParameterException</c> being thrown.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.GetDSTrustCmdlet.Limit">
            <summary>
            <para>
            <para>The maximum number of objects to return.</para>
            </para>
            <para>
            <br/><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet.
            <br/>In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call.
            <br/>Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.GetDSTrustCmdlet.NextToken">
            <summary>
            <para>
            <para>The <i>DescribeTrustsResult.NextToken</i> value from a previous call to <a>DescribeTrusts</a>.
            Pass null if this is the first call.</para>
            </para>
            <para>
            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.
            <br/>'NextToken' is only returned by the cmdlet when '-Select *' is specified. In order to manually control output pagination, set '-NextToken' to null for the first call then set the 'NextToken' using the same property output from the previous call for subsequent calls.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.GetDSTrustCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Trusts'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DirectoryService.Model.DescribeTrustsResponse).
            Specifying the name of a property of type Amazon.DirectoryService.Model.DescribeTrustsResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.GetDSTrustCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the DirectoryId parameter.
            The -PassThru parameter is deprecated, use -Select '^DirectoryId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.GetDSTrustCmdlet.NoAutoIteration">
            <summary>
            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple
            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken
            as the start point.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DS.GetDSUpdateDirectoryCmdlet">
            <summary>
            Describes the updates of a directory for a particular update type.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.GetDSUpdateDirectoryCmdlet.DirectoryId">
            <summary>
            <para>
            <para> The unique identifier of the directory. </para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.GetDSUpdateDirectoryCmdlet.RegionName">
            <summary>
            <para>
            <para> The name of the Region. </para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.GetDSUpdateDirectoryCmdlet.UpdateType">
            <summary>
            <para>
            <para> The type of updates you want to describe for the directory. </para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.GetDSUpdateDirectoryCmdlet.NextToken">
            <summary>
            <para>
            <para> The <c>DescribeUpdateDirectoryResult</c>. NextToken value from a previous call to
            <a>DescribeUpdateDirectory</a>. Pass null if this is the first call. </para>
            </para>
            <para>
            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.
            <br/>'NextToken' is only returned by the cmdlet when '-Select *' is specified. In order to manually control output pagination, set '-NextToken' to null for the first call then set the 'NextToken' using the same property output from the previous call for subsequent calls.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.GetDSUpdateDirectoryCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'UpdateActivities'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DirectoryService.Model.DescribeUpdateDirectoryResponse).
            Specifying the name of a property of type Amazon.DirectoryService.Model.DescribeUpdateDirectoryResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.GetDSUpdateDirectoryCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the DirectoryId parameter.
            The -PassThru parameter is deprecated, use -Select '^DirectoryId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.GetDSUpdateDirectoryCmdlet.NoAutoIteration">
            <summary>
            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple
            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken
            as the start point.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DS.NewDSAliasCmdlet">
            <summary>
            Creates an alias for a directory and assigns the alias to the directory. The alias
            is used to construct the access URL for the directory, such as <c>http://&lt;alias&gt;.awsapps.com</c>.
             
             <important><para>
            After an alias has been created, it cannot be deleted or reused, so this operation
            should only be used when absolutely necessary.
            </para></important>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.NewDSAliasCmdlet.Alias">
            <summary>
            <para>
            <para>The requested alias.</para><para>The alias must be unique amongst all aliases in Amazon Web Services. This operation
            throws an <c>EntityAlreadyExistsException</c> error if the alias already exists.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.NewDSAliasCmdlet.DirectoryId">
            <summary>
            <para>
            <para>The identifier of the directory for which to create the alias.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.NewDSAliasCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is '*'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DirectoryService.Model.CreateAliasResponse).
            Specifying the name of a property of type Amazon.DirectoryService.Model.CreateAliasResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.NewDSAliasCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the DirectoryId parameter.
            The -PassThru parameter is deprecated, use -Select '^DirectoryId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.NewDSAliasCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DS.NewDSComputerCmdlet">
            <summary>
            Creates an Active Directory computer object in the specified directory.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.NewDSComputerCmdlet.ComputerAttribute">
            <summary>
            <para>
            <para>An array of <a>Attribute</a> objects that contain any LDAP attributes to apply to
            the computer account.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.NewDSComputerCmdlet.ComputerName">
            <summary>
            <para>
            <para>The name of the computer account.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.NewDSComputerCmdlet.DirectoryId">
            <summary>
            <para>
            <para>The identifier of the directory in which to create the computer account.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.NewDSComputerCmdlet.OrganizationalUnitDistinguishedName">
            <summary>
            <para>
            <para>The fully-qualified distinguished name of the organizational unit to place the computer
            account in.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.NewDSComputerCmdlet.Password">
            <summary>
            <para>
            <para>A one-time password that is used to join the computer to the directory. You should
            generate a random, strong password to use for this parameter.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.NewDSComputerCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Computer'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DirectoryService.Model.CreateComputerResponse).
            Specifying the name of a property of type Amazon.DirectoryService.Model.CreateComputerResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.NewDSComputerCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the DirectoryId parameter.
            The -PassThru parameter is deprecated, use -Select '^DirectoryId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.NewDSComputerCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DS.NewDSConditionalForwarderCmdlet">
            <summary>
            Creates a conditional forwarder associated with your Amazon Web Services directory.
            Conditional forwarders are required in order to set up a trust relationship with another
            domain. The conditional forwarder points to the trusted domain.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.NewDSConditionalForwarderCmdlet.DirectoryId">
            <summary>
            <para>
            <para>The directory ID of the Amazon Web Services directory for which you are creating the
            conditional forwarder.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.NewDSConditionalForwarderCmdlet.DnsIpAddr">
            <summary>
            <para>
            <para>The IP addresses of the remote DNS server associated with RemoteDomainName.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.NewDSConditionalForwarderCmdlet.RemoteDomainName">
            <summary>
            <para>
            <para>The fully qualified domain name (FQDN) of the remote domain with which you will set
            up a trust relationship.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.NewDSConditionalForwarderCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DirectoryService.Model.CreateConditionalForwarderResponse).
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.NewDSConditionalForwarderCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the DirectoryId parameter.
            The -PassThru parameter is deprecated, use -Select '^DirectoryId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.NewDSConditionalForwarderCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DS.NewDSDirectoryCmdlet">
            <summary>
            Creates a Simple AD directory. For more information, see <a href="https://docs.aws.amazon.com/directoryservice/latest/admin-guide/directory_simple_ad.html">Simple
            Active Directory</a> in the <i>Directory Service Admin Guide</i>.
             
              
            <para>
            Before you call <c>CreateDirectory</c>, ensure that all of the required permissions
            have been explicitly granted through a policy. For details about what permissions
            are required to run the <c>CreateDirectory</c> operation, see <a href="http://docs.aws.amazon.com/directoryservice/latest/admin-guide/UsingWithDS_IAM_ResourcePermissions.html">Directory
            Service API Permissions: Actions, Resources, and Conditions Reference</a>.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.NewDSDirectoryCmdlet.Description">
            <summary>
            <para>
            <para>A description for the directory.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.NewDSDirectoryCmdlet.Name">
            <summary>
            <para>
            <para>The fully qualified name for the directory, such as <c>corp.example.com</c>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.NewDSDirectoryCmdlet.Password">
            <summary>
            <para>
            <para>The password for the directory administrator. The directory creation process creates
            a directory administrator account with the user name <c>Administrator</c> and this
            password.</para><para>If you need to change the password for the administrator account, you can use the
            <a>ResetUserPassword</a> API call.</para><para>The regex pattern for this string is made up of the following conditions:</para><ul><li><para>Length (?=^.{8,64}$) – Must be between 8 and 64 characters</para></li></ul><para>AND any 3 of the following password complexity rules required by Active Directory:</para><ul><li><para>Numbers and upper case and lowercase (?=.*\d)(?=.*[A-Z])(?=.*[a-z])</para></li><li><para>Numbers and special characters and lower case (?=.*\d)(?=.*[^A-Za-z0-9\s])(?=.*[a-z])</para></li><li><para>Special characters and upper case and lower case (?=.*[^A-Za-z0-9\s])(?=.*[A-Z])(?=.*[a-z])</para></li><li><para>Numbers and upper case and special characters (?=.*\d)(?=.*[A-Z])(?=.*[^A-Za-z0-9\s])</para></li></ul><para>For additional information about how Active Directory passwords are enforced, see
            <a href="https://docs.microsoft.com/en-us/windows/security/threat-protection/security-policy-settings/password-must-meet-complexity-requirements">Password
            must meet complexity requirements</a> on the Microsoft website.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.NewDSDirectoryCmdlet.ShortName">
            <summary>
            <para>
            <para>The NetBIOS name of the directory, such as <c>CORP</c>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.NewDSDirectoryCmdlet.Size">
            <summary>
            <para>
            <para>The size of the directory.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.NewDSDirectoryCmdlet.VpcSettings_SubnetId">
            <summary>
            <para>
            <para>The identifiers of the subnets for the directory servers. The two subnets must be
            in different Availability Zones. Directory Service creates a directory server and
            a DNS server in each of these subnets.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.NewDSDirectoryCmdlet.Tag">
            <summary>
            <para>
            <para>The tags to be assigned to the Simple AD directory.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.NewDSDirectoryCmdlet.VpcSettings_VpcId">
            <summary>
            <para>
            <para>The identifier of the VPC in which to create the directory.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.NewDSDirectoryCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'DirectoryId'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DirectoryService.Model.CreateDirectoryResponse).
            Specifying the name of a property of type Amazon.DirectoryService.Model.CreateDirectoryResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.NewDSDirectoryCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the Name parameter.
            The -PassThru parameter is deprecated, use -Select '^Name' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.NewDSDirectoryCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DS.NewDSLogSubscriptionCmdlet">
            <summary>
            Creates a subscription to forward real-time Directory Service domain controller security
            logs to the specified Amazon CloudWatch log group in your Amazon Web Services account.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.NewDSLogSubscriptionCmdlet.DirectoryId">
            <summary>
            <para>
            <para>Identifier of the directory to which you want to subscribe and receive real-time logs
            to your specified CloudWatch log group.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.NewDSLogSubscriptionCmdlet.LogGroupName">
            <summary>
            <para>
            <para>The name of the CloudWatch log group where the real-time domain controller logs are
            forwarded.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.NewDSLogSubscriptionCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DirectoryService.Model.CreateLogSubscriptionResponse).
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.NewDSLogSubscriptionCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the DirectoryId parameter.
            The -PassThru parameter is deprecated, use -Select '^DirectoryId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.NewDSLogSubscriptionCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DS.NewDSMicrosoftADCmdlet">
            <summary>
            Creates a Microsoft AD directory in the Amazon Web Services Cloud. For more information,
            see <a href="https://docs.aws.amazon.com/directoryservice/latest/admin-guide/directory_microsoft_ad.html">Managed
            Microsoft AD</a> in the <i>Directory Service Admin Guide</i>.
             
              
            <para>
            Before you call <i>CreateMicrosoftAD</i>, ensure that all of the required permissions
            have been explicitly granted through a policy. For details about what permissions
            are required to run the <i>CreateMicrosoftAD</i> operation, see <a href="http://docs.aws.amazon.com/directoryservice/latest/admin-guide/UsingWithDS_IAM_ResourcePermissions.html">Directory
            Service API Permissions: Actions, Resources, and Conditions Reference</a>.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.NewDSMicrosoftADCmdlet.Description">
            <summary>
            <para>
            <para>A description for the directory. This label will appear on the Amazon Web Services
            console <c>Directory Details</c> page after the directory is created.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.NewDSMicrosoftADCmdlet.Edition">
            <summary>
            <para>
            <para>Managed Microsoft AD is available in two editions: <c>Standard</c> and <c>Enterprise</c>.
            <c>Enterprise</c> is the default.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.NewDSMicrosoftADCmdlet.Name">
            <summary>
            <para>
            <para>The fully qualified domain name for the Managed Microsoft AD directory, such as <c>corp.example.com</c>.
            This name will resolve inside your VPC only. It does not need to be publicly resolvable.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.NewDSMicrosoftADCmdlet.Password">
            <summary>
            <para>
            <para>The password for the default administrative user named <c>Admin</c>.</para><para>If you need to change the password for the administrator account, you can use the
            <a>ResetUserPassword</a> API call.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.NewDSMicrosoftADCmdlet.ShortName">
            <summary>
            <para>
            <para>The NetBIOS name for your domain, such as <c>CORP</c>. If you don't specify a NetBIOS
            name, it will default to the first part of your directory DNS. For example, <c>CORP</c>
            for the directory DNS <c>corp.example.com</c>. </para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.NewDSMicrosoftADCmdlet.VpcSettings_SubnetId">
            <summary>
            <para>
            <para>The identifiers of the subnets for the directory servers. The two subnets must be
            in different Availability Zones. Directory Service creates a directory server and
            a DNS server in each of these subnets.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.NewDSMicrosoftADCmdlet.Tag">
            <summary>
            <para>
            <para>The tags to be assigned to the Managed Microsoft AD directory.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.NewDSMicrosoftADCmdlet.VpcSettings_VpcId">
            <summary>
            <para>
            <para>The identifier of the VPC in which to create the directory.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.NewDSMicrosoftADCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'DirectoryId'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DirectoryService.Model.CreateMicrosoftADResponse).
            Specifying the name of a property of type Amazon.DirectoryService.Model.CreateMicrosoftADResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.NewDSMicrosoftADCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the Name parameter.
            The -PassThru parameter is deprecated, use -Select '^Name' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.NewDSMicrosoftADCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DS.NewDSSnapshotCmdlet">
            <summary>
            Creates a snapshot of a Simple AD or Microsoft AD directory in the Amazon Web Services
            cloud.
             
             <note><para>
            You cannot take snapshots of AD Connector directories.
            </para></note>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.NewDSSnapshotCmdlet.DirectoryId">
            <summary>
            <para>
            <para>The identifier of the directory of which to take a snapshot.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.NewDSSnapshotCmdlet.Name">
            <summary>
            <para>
            <para>The descriptive name to apply to the snapshot.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.NewDSSnapshotCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'SnapshotId'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DirectoryService.Model.CreateSnapshotResponse).
            Specifying the name of a property of type Amazon.DirectoryService.Model.CreateSnapshotResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.NewDSSnapshotCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the DirectoryId parameter.
            The -PassThru parameter is deprecated, use -Select '^DirectoryId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.NewDSSnapshotCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DS.NewDSTrustCmdlet">
            <summary>
            Directory Service for Microsoft Active Directory allows you to configure trust relationships.
            For example, you can establish a trust between your Managed Microsoft AD directory,
            and your existing self-managed Microsoft Active Directory. This would allow you to
            provide users and groups access to resources in either domain, with a single set of
            credentials.
             
              
            <para>
            This action initiates the creation of the Amazon Web Services side of a trust relationship
            between an Managed Microsoft AD directory and an external domain. You can create either
            a forest trust or an external trust.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.NewDSTrustCmdlet.ConditionalForwarderIpAddr">
            <summary>
            <para>
            <para>The IP addresses of the remote DNS server associated with RemoteDomainName.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.NewDSTrustCmdlet.DirectoryId">
            <summary>
            <para>
            <para>The Directory ID of the Managed Microsoft AD directory for which to establish the
            trust relationship.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.NewDSTrustCmdlet.RemoteDomainName">
            <summary>
            <para>
            <para>The Fully Qualified Domain Name (FQDN) of the external domain for which to create
            the trust relationship.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.NewDSTrustCmdlet.SelectiveAuth">
            <summary>
            <para>
            <para>Optional parameter to enable selective authentication for the trust.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.NewDSTrustCmdlet.TrustDirection">
            <summary>
            <para>
            <para>The direction of the trust relationship.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.NewDSTrustCmdlet.TrustPassword">
            <summary>
            <para>
            <para>The trust password. The trust password must be the same password that was used when
            creating the trust relationship on the external domain.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.NewDSTrustCmdlet.TrustType">
            <summary>
            <para>
            <para>The trust relationship type. <c>Forest</c> is the default.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.NewDSTrustCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'TrustId'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DirectoryService.Model.CreateTrustResponse).
            Specifying the name of a property of type Amazon.DirectoryService.Model.CreateTrustResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.NewDSTrustCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the DirectoryId parameter.
            The -PassThru parameter is deprecated, use -Select '^DirectoryId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.NewDSTrustCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DS.RegisterDSCertificateCmdlet">
            <summary>
            Registers a certificate for a secure LDAP or client certificate authentication.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.RegisterDSCertificateCmdlet.CertificateData">
            <summary>
            <para>
            <para>The certificate PEM string that needs to be registered.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.RegisterDSCertificateCmdlet.DirectoryId">
            <summary>
            <para>
            <para>The identifier of the directory.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.RegisterDSCertificateCmdlet.ClientCertAuthSettings_OCSPUrl">
            <summary>
            <para>
            <para>Specifies the URL of the default OCSP server used to check for revocation status.
            A secondary value to any OCSP address found in the AIA extension of the user certificate.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.RegisterDSCertificateCmdlet.Type">
            <summary>
            <para>
            <para>The function that the registered certificate performs. Valid values include <c>ClientLDAPS</c>
            or <c>ClientCertAuth</c>. The default value is <c>ClientLDAPS</c>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.RegisterDSCertificateCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'CertificateId'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DirectoryService.Model.RegisterCertificateResponse).
            Specifying the name of a property of type Amazon.DirectoryService.Model.RegisterCertificateResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.RegisterDSCertificateCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the CertificateData parameter.
            The -PassThru parameter is deprecated, use -Select '^CertificateData' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.RegisterDSCertificateCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DS.RegisterDSEventTopicCmdlet">
            <summary>
            Associates a directory with an Amazon SNS topic. This establishes the directory as
            a publisher to the specified Amazon SNS topic. You can then receive email or text
            (SMS) messages when the status of your directory changes. You get notified if your
            directory goes from an Active status to an Impaired or Inoperable status. You also
            receive a notification when the directory returns to an Active status.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.RegisterDSEventTopicCmdlet.DirectoryId">
            <summary>
            <para>
            <para>The Directory ID that will publish status messages to the Amazon SNS topic.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.RegisterDSEventTopicCmdlet.TopicName">
            <summary>
            <para>
            <para>The Amazon SNS topic name to which the directory will publish status messages. This
            Amazon SNS topic must be in the same region as the specified Directory ID.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.RegisterDSEventTopicCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DirectoryService.Model.RegisterEventTopicResponse).
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.RegisterDSEventTopicCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the TopicName parameter.
            The -PassThru parameter is deprecated, use -Select '^TopicName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.RegisterDSEventTopicCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DS.RemoveDSConditionalForwarderCmdlet">
            <summary>
            Deletes a conditional forwarder that has been set up for your Amazon Web Services
            directory.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.RemoveDSConditionalForwarderCmdlet.DirectoryId">
            <summary>
            <para>
            <para>The directory ID for which you are deleting the conditional forwarder.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.RemoveDSConditionalForwarderCmdlet.RemoteDomainName">
            <summary>
            <para>
            <para>The fully qualified domain name (FQDN) of the remote domain with which you are deleting
            the conditional forwarder.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.RemoveDSConditionalForwarderCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DirectoryService.Model.DeleteConditionalForwarderResponse).
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.RemoveDSConditionalForwarderCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the DirectoryId parameter.
            The -PassThru parameter is deprecated, use -Select '^DirectoryId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.RemoveDSConditionalForwarderCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DS.RemoveDSDirectoryCmdlet">
            <summary>
            Deletes an Directory Service directory.
             
              
            <para>
            Before you call <c>DeleteDirectory</c>, ensure that all of the required permissions
            have been explicitly granted through a policy. For details about what permissions
            are required to run the <c>DeleteDirectory</c> operation, see <a href="http://docs.aws.amazon.com/directoryservice/latest/admin-guide/UsingWithDS_IAM_ResourcePermissions.html">Directory
            Service API Permissions: Actions, Resources, and Conditions Reference</a>.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.RemoveDSDirectoryCmdlet.DirectoryId">
            <summary>
            <para>
            <para>The identifier of the directory to delete.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.RemoveDSDirectoryCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'DirectoryId'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DirectoryService.Model.DeleteDirectoryResponse).
            Specifying the name of a property of type Amazon.DirectoryService.Model.DeleteDirectoryResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.RemoveDSDirectoryCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the DirectoryId parameter.
            The -PassThru parameter is deprecated, use -Select '^DirectoryId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.RemoveDSDirectoryCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DS.RemoveDSIpRouteCmdlet">
            <summary>
            Removes IP address blocks from a directory.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.RemoveDSIpRouteCmdlet.CidrIp">
            <summary>
            <para>
            <para>IP address blocks that you want to remove.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.RemoveDSIpRouteCmdlet.DirectoryId">
            <summary>
            <para>
            <para>Identifier (ID) of the directory from which you want to remove the IP addresses.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.RemoveDSIpRouteCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DirectoryService.Model.RemoveIpRoutesResponse).
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.RemoveDSIpRouteCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the DirectoryId parameter.
            The -PassThru parameter is deprecated, use -Select '^DirectoryId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.RemoveDSIpRouteCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DS.RemoveDSLogSubscriptionCmdlet">
            <summary>
            Deletes the specified log subscription.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.RemoveDSLogSubscriptionCmdlet.DirectoryId">
            <summary>
            <para>
            <para>Identifier of the directory whose log subscription you want to delete.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.RemoveDSLogSubscriptionCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DirectoryService.Model.DeleteLogSubscriptionResponse).
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.RemoveDSLogSubscriptionCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the DirectoryId parameter.
            The -PassThru parameter is deprecated, use -Select '^DirectoryId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.RemoveDSLogSubscriptionCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DS.RemoveDSRegionCmdlet">
            <summary>
            Stops all replication and removes the domain controllers from the specified Region.
            You cannot remove the primary Region with this operation. Instead, use the <c>DeleteDirectory</c>
            API.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.RemoveDSRegionCmdlet.DirectoryId">
            <summary>
            <para>
            <para>The identifier of the directory for which you want to remove Region replication.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.RemoveDSRegionCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DirectoryService.Model.RemoveRegionResponse).
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.RemoveDSRegionCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the DirectoryId parameter.
            The -PassThru parameter is deprecated, use -Select '^DirectoryId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.RemoveDSRegionCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DS.RemoveDSResourceTagCmdlet">
            <summary>
            Removes tags from a directory.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.RemoveDSResourceTagCmdlet.ResourceId">
            <summary>
            <para>
            <para>Identifier (ID) of the directory from which to remove the tag.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.RemoveDSResourceTagCmdlet.TagKey">
            <summary>
            <para>
            <para>The tag key (name) of the tag to be removed.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.RemoveDSResourceTagCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DirectoryService.Model.RemoveTagsFromResourceResponse).
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.RemoveDSResourceTagCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the ResourceId parameter.
            The -PassThru parameter is deprecated, use -Select '^ResourceId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.RemoveDSResourceTagCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DS.RemoveDSSnapshotCmdlet">
            <summary>
            Deletes a directory snapshot.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.RemoveDSSnapshotCmdlet.SnapshotId">
            <summary>
            <para>
            <para>The identifier of the directory snapshot to be deleted.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.RemoveDSSnapshotCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'SnapshotId'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DirectoryService.Model.DeleteSnapshotResponse).
            Specifying the name of a property of type Amazon.DirectoryService.Model.DeleteSnapshotResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.RemoveDSSnapshotCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the SnapshotId parameter.
            The -PassThru parameter is deprecated, use -Select '^SnapshotId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.RemoveDSSnapshotCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DS.RemoveDSTrustCmdlet">
            <summary>
            Deletes an existing trust relationship between your Managed Microsoft AD directory
            and an external domain.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.RemoveDSTrustCmdlet.DeleteAssociatedConditionalForwarder">
            <summary>
            <para>
            <para>Delete a conditional forwarder as part of a DeleteTrustRequest.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.RemoveDSTrustCmdlet.TrustId">
            <summary>
            <para>
            <para>The Trust ID of the trust relationship to be deleted.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.RemoveDSTrustCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'TrustId'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DirectoryService.Model.DeleteTrustResponse).
            Specifying the name of a property of type Amazon.DirectoryService.Model.DeleteTrustResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.RemoveDSTrustCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the TrustId parameter.
            The -PassThru parameter is deprecated, use -Select '^TrustId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.RemoveDSTrustCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DS.ResetDSUserPasswordCmdlet">
            <summary>
            Resets the password for any user in your Managed Microsoft AD or Simple AD directory.
            Disabled users will become enabled and can be authenticated following the API call.
             
              
            <para>
            You can reset the password for any user in your directory with the following exceptions:
            </para><ul><li><para>
            For Simple AD, you cannot reset the password for any user that is a member of either
            the <b>Domain Admins</b> or <b>Enterprise Admins</b> group except for the administrator
            user.
            </para></li><li><para>
            For Managed Microsoft AD, you can only reset the password for a user that is in an
            OU based off of the NetBIOS name that you typed when you created your directory. For
            example, you cannot reset the password for a user in the <b>Amazon Web Services Reserved</b>
            OU. For more information about the OU structure for an Managed Microsoft AD directory,
            see <a href="https://docs.aws.amazon.com/directoryservice/latest/admin-guide/ms_ad_getting_started_what_gets_created.html">What
            Gets Created</a> in the <i>Directory Service Administration Guide</i>.
            </para></li></ul>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.ResetDSUserPasswordCmdlet.DirectoryId">
            <summary>
            <para>
            <para>Identifier of the Managed Microsoft AD or Simple AD directory in which the user resides.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.ResetDSUserPasswordCmdlet.NewPassword">
            <summary>
            <para>
            <para>The new password that will be reset.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.ResetDSUserPasswordCmdlet.UserName">
            <summary>
            <para>
            <para>The user name of the user whose password will be reset.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.ResetDSUserPasswordCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DirectoryService.Model.ResetUserPasswordResponse).
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.ResetDSUserPasswordCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the UserName parameter.
            The -PassThru parameter is deprecated, use -Select '^UserName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.ResetDSUserPasswordCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DS.RestoreDSFromSnapshotCmdlet">
            <summary>
            Restores a directory using an existing directory snapshot.
             
              
            <para>
            When you restore a directory from a snapshot, any changes made to the directory after
            the snapshot date are overwritten.
            </para><para>
            This action returns as soon as the restore operation is initiated. You can monitor
            the progress of the restore operation by calling the <a>DescribeDirectories</a> operation
            with the directory identifier. When the <b>DirectoryDescription.Stage</b> value changes
            to <c>Active</c>, the restore operation is complete.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.RestoreDSFromSnapshotCmdlet.SnapshotId">
            <summary>
            <para>
            <para>The identifier of the snapshot to restore from.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.RestoreDSFromSnapshotCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DirectoryService.Model.RestoreFromSnapshotResponse).
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.RestoreDSFromSnapshotCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the SnapshotId parameter.
            The -PassThru parameter is deprecated, use -Select '^SnapshotId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.RestoreDSFromSnapshotCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DS.SetDSDomainControllerCountCmdlet">
            <summary>
            Adds or removes domain controllers to or from the directory. Based on the difference
            between current value and new value (provided through this API call), domain controllers
            will be added or removed. It may take up to 45 minutes for any new domain controllers
            to become fully active once the requested number of domain controllers is updated.
            During this time, you cannot make another update request.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.SetDSDomainControllerCountCmdlet.DesiredNumber">
            <summary>
            <para>
            <para>The number of domain controllers desired in the directory.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.SetDSDomainControllerCountCmdlet.DirectoryId">
            <summary>
            <para>
            <para>Identifier of the directory to which the domain controllers will be added or removed.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.SetDSDomainControllerCountCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DirectoryService.Model.UpdateNumberOfDomainControllersResponse).
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.SetDSDomainControllerCountCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the DesiredNumber parameter.
            The -PassThru parameter is deprecated, use -Select '^DesiredNumber' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.SetDSDomainControllerCountCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DS.StartDSSchemaExtensionCmdlet">
            <summary>
            Applies a schema extension to a Microsoft AD directory.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.StartDSSchemaExtensionCmdlet.CreateSnapshotBeforeSchemaExtension">
            <summary>
            <para>
            <para>If true, creates a snapshot of the directory before applying the schema extension.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.StartDSSchemaExtensionCmdlet.Description">
            <summary>
            <para>
            <para>A description of the schema extension.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.StartDSSchemaExtensionCmdlet.DirectoryId">
            <summary>
            <para>
            <para>The identifier of the directory for which the schema extension will be applied to.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.StartDSSchemaExtensionCmdlet.LdifContent">
            <summary>
            <para>
            <para>The LDIF file represented as a string. To construct the LdifContent string, precede
            each line as it would be formatted in an ldif file with \n. See the example request
            below for more details. The file size can be no larger than 1MB.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.StartDSSchemaExtensionCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'SchemaExtensionId'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DirectoryService.Model.StartSchemaExtensionResponse).
            Specifying the name of a property of type Amazon.DirectoryService.Model.StartSchemaExtensionResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.StartDSSchemaExtensionCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the DirectoryId parameter.
            The -PassThru parameter is deprecated, use -Select '^DirectoryId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.StartDSSchemaExtensionCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DS.StopDSSchemaExtensionCmdlet">
            <summary>
            Cancels an in-progress schema extension to a Microsoft AD directory. Once a schema
            extension has started replicating to all domain controllers, the task can no longer
            be canceled. A schema extension can be canceled during any of the following states;
            <c>Initializing</c>, <c>CreatingSnapshot</c>, and <c>UpdatingSchema</c>.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.StopDSSchemaExtensionCmdlet.DirectoryId">
            <summary>
            <para>
            <para>The identifier of the directory whose schema extension will be canceled.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.StopDSSchemaExtensionCmdlet.SchemaExtensionId">
            <summary>
            <para>
            <para>The identifier of the schema extension that will be canceled.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.StopDSSchemaExtensionCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DirectoryService.Model.CancelSchemaExtensionResponse).
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.StopDSSchemaExtensionCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the DirectoryId parameter.
            The -PassThru parameter is deprecated, use -Select '^DirectoryId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.StopDSSchemaExtensionCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DS.UnregisterDSCertificateCmdlet">
            <summary>
            Deletes from the system the certificate that was registered for secure LDAP or client
            certificate authentication.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.UnregisterDSCertificateCmdlet.CertificateId">
            <summary>
            <para>
            <para>The identifier of the certificate.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.UnregisterDSCertificateCmdlet.DirectoryId">
            <summary>
            <para>
            <para>The identifier of the directory.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.UnregisterDSCertificateCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DirectoryService.Model.DeregisterCertificateResponse).
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.UnregisterDSCertificateCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the CertificateId parameter.
            The -PassThru parameter is deprecated, use -Select '^CertificateId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.UnregisterDSCertificateCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DS.UnregisterDSEventTopicCmdlet">
            <summary>
            Removes the specified directory as a publisher to the specified Amazon SNS topic.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.UnregisterDSEventTopicCmdlet.DirectoryId">
            <summary>
            <para>
            <para>The Directory ID to remove as a publisher. This directory will no longer send messages
            to the specified Amazon SNS topic.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.UnregisterDSEventTopicCmdlet.TopicName">
            <summary>
            <para>
            <para>The name of the Amazon SNS topic from which to remove the directory as a publisher.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.UnregisterDSEventTopicCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DirectoryService.Model.DeregisterEventTopicResponse).
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.UnregisterDSEventTopicCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the DirectoryId parameter.
            The -PassThru parameter is deprecated, use -Select '^DirectoryId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.UnregisterDSEventTopicCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DS.UpdateDSConditionalForwarderCmdlet">
            <summary>
            Updates a conditional forwarder that has been set up for your Amazon Web Services
            directory.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.UpdateDSConditionalForwarderCmdlet.DirectoryId">
            <summary>
            <para>
            <para>The directory ID of the Amazon Web Services directory for which to update the conditional
            forwarder.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.UpdateDSConditionalForwarderCmdlet.DnsIpAddr">
            <summary>
            <para>
            <para>The updated IP addresses of the remote DNS server associated with the conditional
            forwarder.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.UpdateDSConditionalForwarderCmdlet.RemoteDomainName">
            <summary>
            <para>
            <para>The fully qualified domain name (FQDN) of the remote domain with which you will set
            up a trust relationship.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.UpdateDSConditionalForwarderCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DirectoryService.Model.UpdateConditionalForwarderResponse).
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.UpdateDSConditionalForwarderCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the DirectoryId parameter.
            The -PassThru parameter is deprecated, use -Select '^DirectoryId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.UpdateDSConditionalForwarderCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DS.UpdateDSDirectorySetupCmdlet">
            <summary>
            Updates the directory for a particular update type.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.UpdateDSDirectorySetupCmdlet.CreateSnapshotBeforeUpdate">
            <summary>
            <para>
            <para> The boolean that specifies if a snapshot for the directory needs to be taken before
            updating the directory. </para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.UpdateDSDirectorySetupCmdlet.DirectoryId">
            <summary>
            <para>
            <para> The identifier of the directory on which you want to perform the update. </para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.UpdateDSDirectorySetupCmdlet.OSUpdateSettings_OSVersion">
            <summary>
            <para>
            <para> OS version that the directory needs to be updated to. </para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.UpdateDSDirectorySetupCmdlet.UpdateType">
            <summary>
            <para>
            <para> The type of update that needs to be performed on the directory. For example, OS.
            </para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.UpdateDSDirectorySetupCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DirectoryService.Model.UpdateDirectorySetupResponse).
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.UpdateDSDirectorySetupCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the DirectoryId parameter.
            The -PassThru parameter is deprecated, use -Select '^DirectoryId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.UpdateDSDirectorySetupCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DS.UpdateDSRadiusCmdlet">
            <summary>
            Updates the Remote Authentication Dial In User Service (RADIUS) server information
            for an AD Connector or Microsoft AD directory.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.UpdateDSRadiusCmdlet.RadiusSettings_AuthenticationProtocol">
            <summary>
            <para>
            <para>The protocol specified for your RADIUS endpoints.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.UpdateDSRadiusCmdlet.DirectoryId">
            <summary>
            <para>
            <para>The identifier of the directory for which to update the RADIUS server information.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.UpdateDSRadiusCmdlet.RadiusSettings_DisplayLabel">
            <summary>
            <para>
            <para>Not currently used.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.UpdateDSRadiusCmdlet.RadiusSettings_RadiusPort">
            <summary>
            <para>
            <para>The port that your RADIUS server is using for communications. Your self-managed network
            must allow inbound traffic over this port from the Directory Service servers.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.UpdateDSRadiusCmdlet.RadiusSettings_RadiusRetry">
            <summary>
            <para>
            <para>The maximum number of times that communication with the RADIUS server is retried after
            the initial attempt.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.UpdateDSRadiusCmdlet.RadiusSettings_RadiusServer">
            <summary>
            <para>
            <para>An array of strings that contains the fully qualified domain name (FQDN) or IP addresses
            of the RADIUS server endpoints, or the FQDN or IP addresses of your RADIUS server
            load balancer.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.UpdateDSRadiusCmdlet.RadiusSettings_RadiusTimeout">
            <summary>
            <para>
            <para>The amount of time, in seconds, to wait for the RADIUS server to respond.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.UpdateDSRadiusCmdlet.RadiusSettings_SharedSecret">
            <summary>
            <para>
            <para>Required for enabling RADIUS on the directory.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.UpdateDSRadiusCmdlet.RadiusSettings_UseSameUsername">
            <summary>
            <para>
            <para>Not currently used.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.UpdateDSRadiusCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DirectoryService.Model.UpdateRadiusResponse).
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.UpdateDSRadiusCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the DirectoryId parameter.
            The -PassThru parameter is deprecated, use -Select '^DirectoryId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.UpdateDSRadiusCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DS.UpdateDSSettingCmdlet">
            <summary>
            Updates the configurable settings for the specified directory.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.UpdateDSSettingCmdlet.DirectoryId">
            <summary>
            <para>
            <para>The identifier of the directory for which to update settings.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.UpdateDSSettingCmdlet.Setting">
            <summary>
            <para>
            <para>The list of <a>Setting</a> objects.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.UpdateDSSettingCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'DirectoryId'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DirectoryService.Model.UpdateSettingsResponse).
            Specifying the name of a property of type Amazon.DirectoryService.Model.UpdateSettingsResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.UpdateDSSettingCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the DirectoryId parameter.
            The -PassThru parameter is deprecated, use -Select '^DirectoryId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.UpdateDSSettingCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DS.UpdateDSTrustCmdlet">
            <summary>
            Updates the trust that has been set up between your Managed Microsoft AD directory
            and an self-managed Active Directory.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.UpdateDSTrustCmdlet.SelectiveAuth">
            <summary>
            <para>
            <para>Updates selective authentication for the trust.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.UpdateDSTrustCmdlet.TrustId">
            <summary>
            <para>
            <para>Identifier of the trust relationship.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.UpdateDSTrustCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is '*'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.DirectoryService.Model.UpdateTrustResponse).
            Specifying the name of a property of type Amazon.DirectoryService.Model.UpdateTrustResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.UpdateDSTrustCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the TrustId parameter.
            The -PassThru parameter is deprecated, use -Select '^TrustId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DS.UpdateDSTrustCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
    </members>
</doc>