AWS.Tools.AppConfig.XML
|
<?xml version="1.0"?>
<doc> <assembly> <name>AWS.Tools.AppConfig</name> </assembly> <members> <member name="T:Amazon.PowerShell.Cmdlets.APPC.AddAPPCResourceTagCmdlet"> <summary> Assigns metadata to an AppConfig resource. Tags help organize and categorize your AppConfig resources. Each tag consists of a key and an optional value, both of which you define. You can specify a maximum of 50 tags for a resource. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.AddAPPCResourceTagCmdlet.ResourceArn"> <summary> <para> <para>The ARN of the resource for which to retrieve tags.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.AddAPPCResourceTagCmdlet.Tag"> <summary> <para> <para>The key-value string map. The valid character set is [a-zA-Z+-=._:/]. The tag key can be up to 128 characters and must not start with <code>aws:</code>. The tag value can be up to 256 characters.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.AddAPPCResourceTagCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.AppConfig.Model.TagResourceResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.AddAPPCResourceTagCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the ResourceArn parameter. The -PassThru parameter is deprecated, use -Select '^ResourceArn' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.AddAPPCResourceTagCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.APPC.GetAPPCApplicationCmdlet"> <summary> Retrieves information about an application. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.GetAPPCApplicationCmdlet.ApplicationId"> <summary> <para> <para>The ID of the application you want to get.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.GetAPPCApplicationCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is '*'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.AppConfig.Model.GetApplicationResponse). Specifying the name of a property of type Amazon.AppConfig.Model.GetApplicationResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.GetAPPCApplicationCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the ApplicationId parameter. The -PassThru parameter is deprecated, use -Select '^ApplicationId' instead. This parameter will be removed in a future version. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.APPC.GetAPPCApplicationListCmdlet"> <summary> Lists all applications in your Amazon Web Services account.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.GetAPPCApplicationListCmdlet.MaxResult"> <summary> <para> <para>The maximum number of items to return for this call. The call also returns a token that you can specify in a subsequent call to get the next set of results.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.GetAPPCApplicationListCmdlet.NextToken"> <summary> <para> <para>A token to start the list. Next token is a pagination token generated by AppConfig to describe what page the previous List call ended on. For the first List request, the nextToken should not be set. On subsequent calls, the nextToken parameter should be set to the previous responses nextToken value. Use this token to get the next set of results. </para> </para> <para> <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call. <br/>In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.GetAPPCApplicationListCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'Items'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.AppConfig.Model.ListApplicationsResponse). Specifying the name of a property of type Amazon.AppConfig.Model.ListApplicationsResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.GetAPPCApplicationListCmdlet.NoAutoIteration"> <summary> By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken as the start point. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.APPC.GetAPPCConfigurationCmdlet"> <summary> Retrieves the latest deployed configuration. <important><para> Note the following important information. </para><ul><li><para> This API action has been deprecated. Calls to receive configuration data should use the <a href="https://docs.aws.amazon.com/appconfig/2019-10-09/APIReference/API_appconfigdata_StartConfigurationSession.html">StartConfigurationSession</a> and <a href="https://docs.aws.amazon.com/appconfig/2019-10-09/APIReference/API_appconfigdata_GetLatestConfiguration.html">GetLatestConfiguration</a> APIs instead. </para></li><li><para><code>GetConfiguration</code> is a priced call. For more information, see <a href="https://aws.amazon.com/systems-manager/pricing/">Pricing</a>. </para></li><li><para> AppConfig uses the value of the <code>ClientConfigurationVersion</code> parameter to identify the configuration version on your clients. If you don’t send <code>ClientConfigurationVersion</code> with each call to <code>GetConfiguration</code>, your clients receive the current configuration. You are charged each time your clients receive a configuration. </para><para> To avoid excess charges, we recommend you use the <a href="https://docs.aws.amazon.com/appconfig/2019-10-09/APIReference/StartConfigurationSession.html">StartConfigurationSession</a> and <a href="https://docs.aws.amazon.com/appconfig/2019-10-09/APIReference/GetLatestConfiguration.html">GetLatestConfiguration</a> APIs, which track the client configuration version on your behalf. If you choose to continue using <code>GetConfiguration</code>, we recommend that you include the <code>ClientConfigurationVersion</code> value with every call to <code>GetConfiguration</code>. The value to use for <code>ClientConfigurationVersion</code> comes from the <code>ConfigurationVersion</code> attribute returned by <code>GetConfiguration</code> when there is new or updated data, and should be saved for subsequent calls to <code>GetConfiguration</code>. </para></li></ul></important><br/><br/>This operation is deprecated. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.GetAPPCConfigurationCmdlet.Application"> <summary> <para> <para>The application to get. Specify either the application name or the application ID.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.GetAPPCConfigurationCmdlet.ClientConfigurationVersion"> <summary> <para> <para>The configuration version returned in the most recent <code>GetConfiguration</code> response.</para><important><para>AppConfig uses the value of the <code>ClientConfigurationVersion</code> parameter to identify the configuration version on your clients. If you don’t send <code>ClientConfigurationVersion</code> with each call to <code>GetConfiguration</code>, your clients receive the current configuration. You are charged each time your clients receive a configuration.</para><para>To avoid excess charges, we recommend that you include the <code>ClientConfigurationVersion</code> value with every call to <code>GetConfiguration</code>. This value must be saved on your client. Subsequent calls to <code>GetConfiguration</code> must pass this value by using the <code>ClientConfigurationVersion</code> parameter. </para></important><para>For more information about working with configurations, see <a href="http://docs.aws.amazon.com/appconfig/latest/userguide/appconfig-retrieving-the-configuration.html">Retrieving the Configuration</a> in the <i>AppConfig User Guide</i>.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.GetAPPCConfigurationCmdlet.ClientId"> <summary> <para> <para>The clientId parameter in the following command is a unique, user-specified ID to identify the client for the configuration. This ID enables AppConfig to deploy the configuration in intervals, as defined in the deployment strategy. </para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.GetAPPCConfigurationCmdlet.Configuration"> <summary> <para> <para>The configuration to get. Specify either the configuration name or the configuration ID.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.GetAPPCConfigurationCmdlet.Environment"> <summary> <para> <para>The environment to get. Specify either the environment name or the environment ID.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.GetAPPCConfigurationCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is '*'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.AppConfig.Model.GetConfigurationResponse). Specifying the name of a property of type Amazon.AppConfig.Model.GetConfigurationResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.GetAPPCConfigurationCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the Configuration parameter. The -PassThru parameter is deprecated, use -Select '^Configuration' instead. This parameter will be removed in a future version. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.APPC.GetAPPCConfigurationProfileCmdlet"> <summary> Retrieves information about a configuration profile. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.GetAPPCConfigurationProfileCmdlet.ApplicationId"> <summary> <para> <para>The ID of the application that includes the configuration profile you want to get.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.GetAPPCConfigurationProfileCmdlet.ConfigurationProfileId"> <summary> <para> <para>The ID of the configuration profile that you want to get.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.GetAPPCConfigurationProfileCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is '*'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.AppConfig.Model.GetConfigurationProfileResponse). Specifying the name of a property of type Amazon.AppConfig.Model.GetConfigurationProfileResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.GetAPPCConfigurationProfileCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the ConfigurationProfileId parameter. The -PassThru parameter is deprecated, use -Select '^ConfigurationProfileId' instead. This parameter will be removed in a future version. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.APPC.GetAPPCConfigurationProfileListCmdlet"> <summary> Lists the configuration profiles for an application.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.GetAPPCConfigurationProfileListCmdlet.ApplicationId"> <summary> <para> <para>The application ID.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.GetAPPCConfigurationProfileListCmdlet.Type"> <summary> <para> <para>A filter based on the type of configurations that the configuration profile contains. A configuration can be a feature flag or a freeform configuration.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.GetAPPCConfigurationProfileListCmdlet.MaxResult"> <summary> <para> <para>The maximum number of items to return for this call. The call also returns a token that you can specify in a subsequent call to get the next set of results.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.GetAPPCConfigurationProfileListCmdlet.NextToken"> <summary> <para> <para>A token to start the list. Use this token to get the next set of results.</para> </para> <para> <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call. <br/>In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.GetAPPCConfigurationProfileListCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'Items'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.AppConfig.Model.ListConfigurationProfilesResponse). Specifying the name of a property of type Amazon.AppConfig.Model.ListConfigurationProfilesResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.GetAPPCConfigurationProfileListCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the ApplicationId parameter. The -PassThru parameter is deprecated, use -Select '^ApplicationId' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.GetAPPCConfigurationProfileListCmdlet.NoAutoIteration"> <summary> By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken as the start point. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.APPC.GetAPPCDeploymentCmdlet"> <summary> Retrieves information about a configuration deployment. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.GetAPPCDeploymentCmdlet.ApplicationId"> <summary> <para> <para>The ID of the application that includes the deployment you want to get. </para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.GetAPPCDeploymentCmdlet.DeploymentNumber"> <summary> <para> <para>The sequence number of the deployment.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.GetAPPCDeploymentCmdlet.EnvironmentId"> <summary> <para> <para>The ID of the environment that includes the deployment you want to get. </para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.GetAPPCDeploymentCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is '*'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.AppConfig.Model.GetDeploymentResponse). Specifying the name of a property of type Amazon.AppConfig.Model.GetDeploymentResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.GetAPPCDeploymentCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the DeploymentNumber parameter. The -PassThru parameter is deprecated, use -Select '^DeploymentNumber' instead. This parameter will be removed in a future version. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.APPC.GetAPPCDeploymentListCmdlet"> <summary> Lists the deployments for an environment in descending deployment number order.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.GetAPPCDeploymentListCmdlet.ApplicationId"> <summary> <para> <para>The application ID.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.GetAPPCDeploymentListCmdlet.EnvironmentId"> <summary> <para> <para>The environment ID.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.GetAPPCDeploymentListCmdlet.MaxResult"> <summary> <para> <para>The maximum number of items that may be returned for this call. If there are items that have not yet been returned, the response will include a non-null <code>NextToken</code> that you can provide in a subsequent call to get the next set of results.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.GetAPPCDeploymentListCmdlet.NextToken"> <summary> <para> <para>The token returned by a prior call to this operation indicating the next set of results to be returned. If not specified, the operation will return the first set of results.</para> </para> <para> <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call. <br/>In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.GetAPPCDeploymentListCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'Items'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.AppConfig.Model.ListDeploymentsResponse). Specifying the name of a property of type Amazon.AppConfig.Model.ListDeploymentsResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.GetAPPCDeploymentListCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the ApplicationId parameter. The -PassThru parameter is deprecated, use -Select '^ApplicationId' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.GetAPPCDeploymentListCmdlet.NoAutoIteration"> <summary> By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken as the start point. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.APPC.GetAPPCDeploymentStrategyCmdlet"> <summary> Retrieves information about a deployment strategy. A deployment strategy defines important criteria for rolling out your configuration to the designated targets. A deployment strategy includes the overall duration required, a percentage of targets to receive the deployment during each interval, an algorithm that defines how percentage grows, and bake time. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.GetAPPCDeploymentStrategyCmdlet.DeploymentStrategyId"> <summary> <para> <para>The ID of the deployment strategy to get.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.GetAPPCDeploymentStrategyCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is '*'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.AppConfig.Model.GetDeploymentStrategyResponse). Specifying the name of a property of type Amazon.AppConfig.Model.GetDeploymentStrategyResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.GetAPPCDeploymentStrategyCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the DeploymentStrategyId parameter. The -PassThru parameter is deprecated, use -Select '^DeploymentStrategyId' instead. This parameter will be removed in a future version. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.APPC.GetAPPCDeploymentStrategyListCmdlet"> <summary> Lists deployment strategies.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.GetAPPCDeploymentStrategyListCmdlet.MaxResult"> <summary> <para> <para>The maximum number of items to return for this call. The call also returns a token that you can specify in a subsequent call to get the next set of results.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.GetAPPCDeploymentStrategyListCmdlet.NextToken"> <summary> <para> <para>A token to start the list. Use this token to get the next set of results.</para> </para> <para> <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call. <br/>In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.GetAPPCDeploymentStrategyListCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'Items'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.AppConfig.Model.ListDeploymentStrategiesResponse). Specifying the name of a property of type Amazon.AppConfig.Model.ListDeploymentStrategiesResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.GetAPPCDeploymentStrategyListCmdlet.NoAutoIteration"> <summary> By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken as the start point. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.APPC.GetAPPCEnvironmentCmdlet"> <summary> Retrieves information about an environment. An environment is a logical deployment group of AppConfig applications, such as applications in a <code>Production</code> environment or in an <code>EU_Region</code> environment. Each configuration deployment targets an environment. You can enable one or more Amazon CloudWatch alarms for an environment. If an alarm is triggered during a deployment, AppConfig roles back the configuration. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.GetAPPCEnvironmentCmdlet.ApplicationId"> <summary> <para> <para>The ID of the application that includes the environment you want to get.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.GetAPPCEnvironmentCmdlet.EnvironmentId"> <summary> <para> <para>The ID of the environment that you want to get.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.GetAPPCEnvironmentCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is '*'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.AppConfig.Model.GetEnvironmentResponse). Specifying the name of a property of type Amazon.AppConfig.Model.GetEnvironmentResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.GetAPPCEnvironmentCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the EnvironmentId parameter. The -PassThru parameter is deprecated, use -Select '^EnvironmentId' instead. This parameter will be removed in a future version. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.APPC.GetAPPCEnvironmentListCmdlet"> <summary> Lists the environments for an application.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.GetAPPCEnvironmentListCmdlet.ApplicationId"> <summary> <para> <para>The application ID.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.GetAPPCEnvironmentListCmdlet.MaxResult"> <summary> <para> <para>The maximum number of items to return for this call. The call also returns a token that you can specify in a subsequent call to get the next set of results.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.GetAPPCEnvironmentListCmdlet.NextToken"> <summary> <para> <para>A token to start the list. Use this token to get the next set of results.</para> </para> <para> <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call. <br/>In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.GetAPPCEnvironmentListCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'Items'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.AppConfig.Model.ListEnvironmentsResponse). Specifying the name of a property of type Amazon.AppConfig.Model.ListEnvironmentsResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.GetAPPCEnvironmentListCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the ApplicationId parameter. The -PassThru parameter is deprecated, use -Select '^ApplicationId' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.GetAPPCEnvironmentListCmdlet.NoAutoIteration"> <summary> By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken as the start point. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.APPC.GetAPPCHostedConfigurationVersionCmdlet"> <summary> Retrieves information about a specific configuration version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.GetAPPCHostedConfigurationVersionCmdlet.ApplicationId"> <summary> <para> <para>The application ID.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.GetAPPCHostedConfigurationVersionCmdlet.ConfigurationProfileId"> <summary> <para> <para>The configuration profile ID.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.GetAPPCHostedConfigurationVersionCmdlet.VersionNumber"> <summary> <para> <para>The version.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.GetAPPCHostedConfigurationVersionCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is '*'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.AppConfig.Model.GetHostedConfigurationVersionResponse). Specifying the name of a property of type Amazon.AppConfig.Model.GetHostedConfigurationVersionResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.GetAPPCHostedConfigurationVersionCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the ConfigurationProfileId parameter. The -PassThru parameter is deprecated, use -Select '^ConfigurationProfileId' instead. This parameter will be removed in a future version. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.APPC.GetAPPCHostedConfigurationVersionListCmdlet"> <summary> Lists configurations stored in the AppConfig hosted configuration store by version.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.GetAPPCHostedConfigurationVersionListCmdlet.ApplicationId"> <summary> <para> <para>The application ID.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.GetAPPCHostedConfigurationVersionListCmdlet.ConfigurationProfileId"> <summary> <para> <para>The configuration profile ID.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.GetAPPCHostedConfigurationVersionListCmdlet.MaxResult"> <summary> <para> <para>The maximum number of items to return for this call. The call also returns a token that you can specify in a subsequent call to get the next set of results.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.GetAPPCHostedConfigurationVersionListCmdlet.NextToken"> <summary> <para> <para>A token to start the list. Use this token to get the next set of results. </para> </para> <para> <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call. <br/>In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.GetAPPCHostedConfigurationVersionListCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'Items'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.AppConfig.Model.ListHostedConfigurationVersionsResponse). Specifying the name of a property of type Amazon.AppConfig.Model.ListHostedConfigurationVersionsResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.GetAPPCHostedConfigurationVersionListCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the ConfigurationProfileId parameter. The -PassThru parameter is deprecated, use -Select '^ConfigurationProfileId' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.GetAPPCHostedConfigurationVersionListCmdlet.NoAutoIteration"> <summary> By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken as the start point. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.APPC.GetAPPCResourceTagCmdlet"> <summary> Retrieves the list of key-value tags assigned to the resource. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.GetAPPCResourceTagCmdlet.ResourceArn"> <summary> <para> <para>The resource ARN.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.GetAPPCResourceTagCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'Tags'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.AppConfig.Model.ListTagsForResourceResponse). Specifying the name of a property of type Amazon.AppConfig.Model.ListTagsForResourceResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.GetAPPCResourceTagCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the ResourceArn parameter. The -PassThru parameter is deprecated, use -Select '^ResourceArn' instead. This parameter will be removed in a future version. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.APPC.NewAPPCApplicationCmdlet"> <summary> Creates an application. An application in AppConfig is a logical unit of code that provides capabilities for your customers. For example, an application can be a microservice that runs on Amazon EC2 instances, a mobile application installed by your users, a serverless application using Amazon API Gateway and Lambda, or any system you run on behalf of others. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.NewAPPCApplicationCmdlet.Description"> <summary> <para> <para>A description of the application.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.NewAPPCApplicationCmdlet.Name"> <summary> <para> <para>A name for the application.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.NewAPPCApplicationCmdlet.Tag"> <summary> <para> <para>Metadata to assign to the application. Tags help organize and categorize your AppConfig resources. Each tag consists of a key and an optional value, both of which you define.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.NewAPPCApplicationCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is '*'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.AppConfig.Model.CreateApplicationResponse). Specifying the name of a property of type Amazon.AppConfig.Model.CreateApplicationResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.NewAPPCApplicationCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the Name parameter. The -PassThru parameter is deprecated, use -Select '^Name' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.NewAPPCApplicationCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.APPC.NewAPPCConfigurationProfileCmdlet"> <summary> Creates a configuration profile, which is information that enables AppConfig to access the configuration source. Valid configuration sources include the AppConfig hosted configuration store, Amazon Web Services Systems Manager (SSM) documents, SSM Parameter Store parameters, Amazon S3 objects, or any <a href="http://docs.aws.amazon.com/codepipeline/latest/userguide/integrations-action-type.html#integrations-source">integration source action</a> supported by CodePipeline. A configuration profile includes the following information: <ul><li><para> The URI location of the configuration data. </para></li><li><para> The Identity and Access Management (IAM) role that provides access to the configuration data. </para></li><li><para> A validator for the configuration data. Available validators include either a JSON Schema or an Amazon Web Services Lambda function. </para></li></ul><para> For more information, see <a href="http://docs.aws.amazon.com/appconfig/latest/userguide/appconfig-creating-configuration-and-profile.html">Create a Configuration and a Configuration Profile</a> in the <i>AppConfig User Guide</i>. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.NewAPPCConfigurationProfileCmdlet.ApplicationId"> <summary> <para> <para>The application ID.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.NewAPPCConfigurationProfileCmdlet.Description"> <summary> <para> <para>A description of the configuration profile.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.NewAPPCConfigurationProfileCmdlet.LocationUri"> <summary> <para> <para>A URI to locate the configuration. You can specify the AppConfig hosted configuration store, Systems Manager (SSM) document, an SSM Parameter Store parameter, or an Amazon S3 object. For the hosted configuration store and for feature flags, specify <code>hosted</code>. For an SSM document, specify either the document name in the format <code>ssm-document://<Document_name></code> or the Amazon Resource Name (ARN). For a parameter, specify either the parameter name in the format <code>ssm-parameter://<Parameter_name></code> or the ARN. For an Amazon S3 object, specify the URI in the following format: <code>s3://<bucket>/<objectKey> </code>. Here is an example: <code>s3://my-bucket/my-app/us-east-1/my-config.json</code></para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.NewAPPCConfigurationProfileCmdlet.Name"> <summary> <para> <para>A name for the configuration profile.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.NewAPPCConfigurationProfileCmdlet.RetrievalRoleArn"> <summary> <para> <para>The ARN of an IAM role with permission to access the configuration at the specified <code>LocationUri</code>.</para><important><para>A retrieval role ARN is not required for configurations stored in the AppConfig hosted configuration store. It is required for all other sources that store your configuration. </para></important> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.NewAPPCConfigurationProfileCmdlet.Tag"> <summary> <para> <para>Metadata to assign to the configuration profile. Tags help organize and categorize your AppConfig resources. Each tag consists of a key and an optional value, both of which you define.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.NewAPPCConfigurationProfileCmdlet.Type"> <summary> <para> <para>The type of configurations contained in the profile. AppConfig supports <code>feature flags</code> and <code>freeform</code> configurations. We recommend you create feature flag configurations to enable or disable new features and freeform configurations to distribute configurations to an application. When calling this API, enter one of the following values for <code>Type</code>:</para><para><code>AWS.AppConfig.FeatureFlags</code></para><para><code>AWS.Freeform</code></para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.NewAPPCConfigurationProfileCmdlet.Validator"> <summary> <para> <para>A list of methods for validating the configuration.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.NewAPPCConfigurationProfileCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is '*'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.AppConfig.Model.CreateConfigurationProfileResponse). Specifying the name of a property of type Amazon.AppConfig.Model.CreateConfigurationProfileResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.NewAPPCConfigurationProfileCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the Name parameter. The -PassThru parameter is deprecated, use -Select '^Name' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.NewAPPCConfigurationProfileCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.APPC.NewAPPCDeploymentStrategyCmdlet"> <summary> Creates a deployment strategy that defines important criteria for rolling out your configuration to the designated targets. A deployment strategy includes the overall duration required, a percentage of targets to receive the deployment during each interval, an algorithm that defines how percentage grows, and bake time. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.NewAPPCDeploymentStrategyCmdlet.DeploymentDurationInMinute"> <summary> <para> <para>Total amount of time for a deployment to last.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.NewAPPCDeploymentStrategyCmdlet.Description"> <summary> <para> <para>A description of the deployment strategy.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.NewAPPCDeploymentStrategyCmdlet.FinalBakeTimeInMinute"> <summary> <para> <para>The amount of time AppConfig monitors for alarms before considering the deployment to be complete and no longer eligible for automatic roll back.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.NewAPPCDeploymentStrategyCmdlet.GrowthFactor"> <summary> <para> <para>The percentage of targets to receive a deployed configuration during each interval.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.NewAPPCDeploymentStrategyCmdlet.GrowthType"> <summary> <para> <para>The algorithm used to define how percentage grows over time. AppConfig supports the following growth types:</para><para><b>Linear</b>: For this type, AppConfig processes the deployment by dividing the total number of targets by the value specified for <code>Step percentage</code>. For example, a linear deployment that uses a <code>Step percentage</code> of 10 deploys the configuration to 10 percent of the hosts. After those deployments are complete, the system deploys the configuration to the next 10 percent. This continues until 100% of the targets have successfully received the configuration.</para><para><b>Exponential</b>: For this type, AppConfig processes the deployment exponentially using the following formula: <code>G*(2^N)</code>. In this formula, <code>G</code> is the growth factor specified by the user and <code>N</code> is the number of steps until the configuration is deployed to all targets. For example, if you specify a growth factor of 2, then the system rolls out the configuration as follows:</para><para><code>2*(2^0)</code></para><para><code>2*(2^1)</code></para><para><code>2*(2^2)</code></para><para>Expressed numerically, the deployment rolls out as follows: 2% of the targets, 4% of the targets, 8% of the targets, and continues until the configuration has been deployed to all targets.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.NewAPPCDeploymentStrategyCmdlet.Name"> <summary> <para> <para>A name for the deployment strategy.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.NewAPPCDeploymentStrategyCmdlet.ReplicateTo"> <summary> <para> <para>Save the deployment strategy to a Systems Manager (SSM) document.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.NewAPPCDeploymentStrategyCmdlet.Tag"> <summary> <para> <para>Metadata to assign to the deployment strategy. Tags help organize and categorize your AppConfig resources. Each tag consists of a key and an optional value, both of which you define.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.NewAPPCDeploymentStrategyCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is '*'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.AppConfig.Model.CreateDeploymentStrategyResponse). Specifying the name of a property of type Amazon.AppConfig.Model.CreateDeploymentStrategyResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.NewAPPCDeploymentStrategyCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the Name parameter. The -PassThru parameter is deprecated, use -Select '^Name' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.NewAPPCDeploymentStrategyCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.APPC.NewAPPCEnvironmentCmdlet"> <summary> Creates an environment. For each application, you define one or more environments. An environment is a logical deployment group of AppConfig targets, such as applications in a <code>Beta</code> or <code>Production</code> environment. You can also define environments for application subcomponents such as the <code>Web</code>, <code>Mobile</code> and <code>Back-end</code> components for your application. You can configure Amazon CloudWatch alarms for each environment. The system monitors alarms during a configuration deployment. If an alarm is triggered, the system rolls back the configuration. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.NewAPPCEnvironmentCmdlet.ApplicationId"> <summary> <para> <para>The application ID.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.NewAPPCEnvironmentCmdlet.Description"> <summary> <para> <para>A description of the environment.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.NewAPPCEnvironmentCmdlet.Monitor"> <summary> <para> <para>Amazon CloudWatch alarms to monitor during the deployment process.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.NewAPPCEnvironmentCmdlet.Name"> <summary> <para> <para>A name for the environment.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.NewAPPCEnvironmentCmdlet.Tag"> <summary> <para> <para>Metadata to assign to the environment. Tags help organize and categorize your AppConfig resources. Each tag consists of a key and an optional value, both of which you define.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.NewAPPCEnvironmentCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is '*'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.AppConfig.Model.CreateEnvironmentResponse). Specifying the name of a property of type Amazon.AppConfig.Model.CreateEnvironmentResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.NewAPPCEnvironmentCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the Name parameter. The -PassThru parameter is deprecated, use -Select '^Name' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.NewAPPCEnvironmentCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.APPC.NewAPPCHostedConfigurationVersionCmdlet"> <summary> Creates a new configuration in the AppConfig hosted configuration store. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.NewAPPCHostedConfigurationVersionCmdlet.ApplicationId"> <summary> <para> <para>The application ID.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.NewAPPCHostedConfigurationVersionCmdlet.ConfigurationProfileId"> <summary> <para> <para>The configuration profile ID.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.NewAPPCHostedConfigurationVersionCmdlet.Content"> <summary> <para> <para>The content of the configuration or the configuration data.</para> </para> <para>The cmdlet will automatically convert the supplied parameter of type string, string[], System.IO.FileInfo or System.IO.Stream to byte[] before supplying it to the service.</para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.NewAPPCHostedConfigurationVersionCmdlet.ContentType"> <summary> <para> <para>A standard MIME type describing the format of the configuration content. For more information, see <a href="https://www.w3.org/Protocols/rfc2616/rfc2616-sec14.html#sec14.17">Content-Type</a>.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.NewAPPCHostedConfigurationVersionCmdlet.Description"> <summary> <para> <para>A description of the configuration.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.NewAPPCHostedConfigurationVersionCmdlet.LatestVersionNumber"> <summary> <para> <para>An optional locking token used to prevent race conditions from overwriting configuration updates when creating a new version. To ensure your data is not overwritten when creating multiple hosted configuration versions in rapid succession, specify the version number of the latest hosted configuration version.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.NewAPPCHostedConfigurationVersionCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is '*'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.AppConfig.Model.CreateHostedConfigurationVersionResponse). Specifying the name of a property of type Amazon.AppConfig.Model.CreateHostedConfigurationVersionResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.NewAPPCHostedConfigurationVersionCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the ApplicationId parameter. The -PassThru parameter is deprecated, use -Select '^ApplicationId' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.NewAPPCHostedConfigurationVersionCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.APPC.RemoveAPPCApplicationCmdlet"> <summary> Deletes an application. Deleting an application does not delete a configuration from a host. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.RemoveAPPCApplicationCmdlet.ApplicationId"> <summary> <para> <para>The ID of the application to delete.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.RemoveAPPCApplicationCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.AppConfig.Model.DeleteApplicationResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.RemoveAPPCApplicationCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the ApplicationId parameter. The -PassThru parameter is deprecated, use -Select '^ApplicationId' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.RemoveAPPCApplicationCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.APPC.RemoveAPPCConfigurationProfileCmdlet"> <summary> Deletes a configuration profile. Deleting a configuration profile does not delete a configuration from a host. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.RemoveAPPCConfigurationProfileCmdlet.ApplicationId"> <summary> <para> <para>The application ID that includes the configuration profile you want to delete.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.RemoveAPPCConfigurationProfileCmdlet.ConfigurationProfileId"> <summary> <para> <para>The ID of the configuration profile you want to delete.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.RemoveAPPCConfigurationProfileCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.AppConfig.Model.DeleteConfigurationProfileResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.RemoveAPPCConfigurationProfileCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the ConfigurationProfileId parameter. The -PassThru parameter is deprecated, use -Select '^ConfigurationProfileId' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.RemoveAPPCConfigurationProfileCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.APPC.RemoveAPPCDeploymentStrategyCmdlet"> <summary> Deletes a deployment strategy. Deleting a deployment strategy does not delete a configuration from a host. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.RemoveAPPCDeploymentStrategyCmdlet.DeploymentStrategyId"> <summary> <para> <para>The ID of the deployment strategy you want to delete.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.RemoveAPPCDeploymentStrategyCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.AppConfig.Model.DeleteDeploymentStrategyResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.RemoveAPPCDeploymentStrategyCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the DeploymentStrategyId parameter. The -PassThru parameter is deprecated, use -Select '^DeploymentStrategyId' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.RemoveAPPCDeploymentStrategyCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.APPC.RemoveAPPCEnvironmentCmdlet"> <summary> Deletes an environment. Deleting an environment does not delete a configuration from a host. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.RemoveAPPCEnvironmentCmdlet.ApplicationId"> <summary> <para> <para>The application ID that includes the environment that you want to delete.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.RemoveAPPCEnvironmentCmdlet.EnvironmentId"> <summary> <para> <para>The ID of the environment that you want to delete.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.RemoveAPPCEnvironmentCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.AppConfig.Model.DeleteEnvironmentResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.RemoveAPPCEnvironmentCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the EnvironmentId parameter. The -PassThru parameter is deprecated, use -Select '^EnvironmentId' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.RemoveAPPCEnvironmentCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.APPC.RemoveAPPCHostedConfigurationVersionCmdlet"> <summary> Deletes a version of a configuration from the AppConfig hosted configuration store. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.RemoveAPPCHostedConfigurationVersionCmdlet.ApplicationId"> <summary> <para> <para>The application ID.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.RemoveAPPCHostedConfigurationVersionCmdlet.ConfigurationProfileId"> <summary> <para> <para>The configuration profile ID.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.RemoveAPPCHostedConfigurationVersionCmdlet.VersionNumber"> <summary> <para> <para>The versions number to delete.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.RemoveAPPCHostedConfigurationVersionCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.AppConfig.Model.DeleteHostedConfigurationVersionResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.RemoveAPPCHostedConfigurationVersionCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the ConfigurationProfileId parameter. The -PassThru parameter is deprecated, use -Select '^ConfigurationProfileId' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.RemoveAPPCHostedConfigurationVersionCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.APPC.RemoveAPPCResourceTagCmdlet"> <summary> Deletes a tag key and value from an AppConfig resource. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.RemoveAPPCResourceTagCmdlet.ResourceArn"> <summary> <para> <para>The ARN of the resource for which to remove tags.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.RemoveAPPCResourceTagCmdlet.TagKey"> <summary> <para> <para>The tag keys to delete.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.RemoveAPPCResourceTagCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.AppConfig.Model.UntagResourceResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.RemoveAPPCResourceTagCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the ResourceArn parameter. The -PassThru parameter is deprecated, use -Select '^ResourceArn' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.RemoveAPPCResourceTagCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.APPC.StartAPPCDeploymentCmdlet"> <summary> Starts a deployment. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.StartAPPCDeploymentCmdlet.ApplicationId"> <summary> <para> <para>The application ID.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.StartAPPCDeploymentCmdlet.ConfigurationProfileId"> <summary> <para> <para>The configuration profile ID.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.StartAPPCDeploymentCmdlet.ConfigurationVersion"> <summary> <para> <para>The configuration version to deploy.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.StartAPPCDeploymentCmdlet.DeploymentStrategyId"> <summary> <para> <para>The deployment strategy ID.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.StartAPPCDeploymentCmdlet.Description"> <summary> <para> <para>A description of the deployment.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.StartAPPCDeploymentCmdlet.EnvironmentId"> <summary> <para> <para>The environment ID.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.StartAPPCDeploymentCmdlet.Tag"> <summary> <para> <para>Metadata to assign to the deployment. Tags help organize and categorize your AppConfig resources. Each tag consists of a key and an optional value, both of which you define.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.StartAPPCDeploymentCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is '*'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.AppConfig.Model.StartDeploymentResponse). Specifying the name of a property of type Amazon.AppConfig.Model.StartDeploymentResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.StartAPPCDeploymentCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the ApplicationId parameter. The -PassThru parameter is deprecated, use -Select '^ApplicationId' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.StartAPPCDeploymentCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.APPC.StopAPPCDeploymentCmdlet"> <summary> Stops a deployment. This API action works only on deployments that have a status of <code>DEPLOYING</code>. This action moves the deployment to a status of <code>ROLLED_BACK</code>. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.StopAPPCDeploymentCmdlet.ApplicationId"> <summary> <para> <para>The application ID.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.StopAPPCDeploymentCmdlet.DeploymentNumber"> <summary> <para> <para>The sequence number of the deployment.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.StopAPPCDeploymentCmdlet.EnvironmentId"> <summary> <para> <para>The environment ID.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.StopAPPCDeploymentCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is '*'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.AppConfig.Model.StopDeploymentResponse). Specifying the name of a property of type Amazon.AppConfig.Model.StopDeploymentResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.StopAPPCDeploymentCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the DeploymentNumber parameter. The -PassThru parameter is deprecated, use -Select '^DeploymentNumber' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.StopAPPCDeploymentCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.APPC.TestAPPCConfigurationValidityCmdlet"> <summary> Uses the validators in a configuration profile to validate a configuration. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.TestAPPCConfigurationValidityCmdlet.ApplicationId"> <summary> <para> <para>The application ID.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.TestAPPCConfigurationValidityCmdlet.ConfigurationProfileId"> <summary> <para> <para>The configuration profile ID.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.TestAPPCConfigurationValidityCmdlet.ConfigurationVersion"> <summary> <para> <para>The version of the configuration to validate.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.TestAPPCConfigurationValidityCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.AppConfig.Model.ValidateConfigurationResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.TestAPPCConfigurationValidityCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the ConfigurationProfileId parameter. The -PassThru parameter is deprecated, use -Select '^ConfigurationProfileId' instead. This parameter will be removed in a future version. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.APPC.UpdateAPPCApplicationCmdlet"> <summary> Updates an application. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.UpdateAPPCApplicationCmdlet.ApplicationId"> <summary> <para> <para>The application ID.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.UpdateAPPCApplicationCmdlet.Description"> <summary> <para> <para>A description of the application.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.UpdateAPPCApplicationCmdlet.Name"> <summary> <para> <para>The name of the application.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.UpdateAPPCApplicationCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is '*'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.AppConfig.Model.UpdateApplicationResponse). Specifying the name of a property of type Amazon.AppConfig.Model.UpdateApplicationResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.UpdateAPPCApplicationCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the ApplicationId parameter. The -PassThru parameter is deprecated, use -Select '^ApplicationId' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.UpdateAPPCApplicationCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.APPC.UpdateAPPCConfigurationProfileCmdlet"> <summary> Updates a configuration profile. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.UpdateAPPCConfigurationProfileCmdlet.ApplicationId"> <summary> <para> <para>The application ID.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.UpdateAPPCConfigurationProfileCmdlet.ConfigurationProfileId"> <summary> <para> <para>The ID of the configuration profile.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.UpdateAPPCConfigurationProfileCmdlet.Description"> <summary> <para> <para>A description of the configuration profile.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.UpdateAPPCConfigurationProfileCmdlet.Name"> <summary> <para> <para>The name of the configuration profile.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.UpdateAPPCConfigurationProfileCmdlet.RetrievalRoleArn"> <summary> <para> <para>The ARN of an IAM role with permission to access the configuration at the specified <code>LocationUri</code>.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.UpdateAPPCConfigurationProfileCmdlet.Validator"> <summary> <para> <para>A list of methods for validating the configuration.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.UpdateAPPCConfigurationProfileCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is '*'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.AppConfig.Model.UpdateConfigurationProfileResponse). Specifying the name of a property of type Amazon.AppConfig.Model.UpdateConfigurationProfileResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.UpdateAPPCConfigurationProfileCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the ConfigurationProfileId parameter. The -PassThru parameter is deprecated, use -Select '^ConfigurationProfileId' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.UpdateAPPCConfigurationProfileCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.APPC.UpdateAPPCDeploymentStrategyCmdlet"> <summary> Updates a deployment strategy. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.UpdateAPPCDeploymentStrategyCmdlet.DeploymentDurationInMinute"> <summary> <para> <para>Total amount of time for a deployment to last.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.UpdateAPPCDeploymentStrategyCmdlet.DeploymentStrategyId"> <summary> <para> <para>The deployment strategy ID.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.UpdateAPPCDeploymentStrategyCmdlet.Description"> <summary> <para> <para>A description of the deployment strategy.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.UpdateAPPCDeploymentStrategyCmdlet.FinalBakeTimeInMinute"> <summary> <para> <para>The amount of time that AppConfig monitors for alarms before considering the deployment to be complete and no longer eligible for automatic rollback.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.UpdateAPPCDeploymentStrategyCmdlet.GrowthFactor"> <summary> <para> <para>The percentage of targets to receive a deployed configuration during each interval.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.UpdateAPPCDeploymentStrategyCmdlet.GrowthType"> <summary> <para> <para>The algorithm used to define how percentage grows over time. AppConfig supports the following growth types:</para><para><b>Linear</b>: For this type, AppConfig processes the deployment by increments of the growth factor evenly distributed over the deployment time. For example, a linear deployment that uses a growth factor of 20 initially makes the configuration available to 20 percent of the targets. After 1/5th of the deployment time has passed, the system updates the percentage to 40 percent. This continues until 100% of the targets are set to receive the deployed configuration.</para><para><b>Exponential</b>: For this type, AppConfig processes the deployment exponentially using the following formula: <code>G*(2^N)</code>. In this formula, <code>G</code> is the growth factor specified by the user and <code>N</code> is the number of steps until the configuration is deployed to all targets. For example, if you specify a growth factor of 2, then the system rolls out the configuration as follows:</para><para><code>2*(2^0)</code></para><para><code>2*(2^1)</code></para><para><code>2*(2^2)</code></para><para>Expressed numerically, the deployment rolls out as follows: 2% of the targets, 4% of the targets, 8% of the targets, and continues until the configuration has been deployed to all targets.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.UpdateAPPCDeploymentStrategyCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is '*'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.AppConfig.Model.UpdateDeploymentStrategyResponse). Specifying the name of a property of type Amazon.AppConfig.Model.UpdateDeploymentStrategyResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.UpdateAPPCDeploymentStrategyCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the DeploymentStrategyId parameter. The -PassThru parameter is deprecated, use -Select '^DeploymentStrategyId' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.UpdateAPPCDeploymentStrategyCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.APPC.UpdateAPPCEnvironmentCmdlet"> <summary> Updates an environment. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.UpdateAPPCEnvironmentCmdlet.ApplicationId"> <summary> <para> <para>The application ID.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.UpdateAPPCEnvironmentCmdlet.Description"> <summary> <para> <para>A description of the environment.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.UpdateAPPCEnvironmentCmdlet.EnvironmentId"> <summary> <para> <para>The environment ID.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.UpdateAPPCEnvironmentCmdlet.Monitor"> <summary> <para> <para>Amazon CloudWatch alarms to monitor during the deployment process.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.UpdateAPPCEnvironmentCmdlet.Name"> <summary> <para> <para>The name of the environment.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.UpdateAPPCEnvironmentCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is '*'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.AppConfig.Model.UpdateEnvironmentResponse). Specifying the name of a property of type Amazon.AppConfig.Model.UpdateEnvironmentResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.UpdateAPPCEnvironmentCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the EnvironmentId parameter. The -PassThru parameter is deprecated, use -Select '^EnvironmentId' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.APPC.UpdateAPPCEnvironmentCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> </members> </doc> |